Prepare to add more files to the source RPM.
Also, fix the build error when KCONFIG_CONFIG is set:
error: Bad file: ./.config: No such file or directory
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The 'b4' command creates a *.mbx file, and also a *.cover file if the
patch set has a cover-letter. Ignore them.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Recent git versions do not accept the noted command.
$ git ls-files -i --exclude-standard
fatal: ls-files -i must be used with either -o or -c
The -c was implied before, but we need to make it explicit since
git commit b338e9f66873 ("ls-files: error out on -i unless -o or -c
are specified").
Also, replace --exclude-standard with --exclude-per-directory=.gitignore
so that everyone will get consistent results.
git-ls-files(1) says:
--exclude-standard
Add the standard Git exclusions: .git/info/exclude, .gitignore in
each directory, and the user's global exclusion file.
We cannot predict what is locally added to .git/info/exclude or the
user's global exclusion file.
We can only manage .gitignore files committed to the repository.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Previously, *.rpm files were created under $HOME/rpmbuild/, but since
commit 8818039f95 ("kbuild: add ability to make source rpm buildable
using koji"), srcrpm-pkg creates the source rpm in the kernel tree
because it sets '_srcrpmdir'.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
%.dtbo.o and %.dtbo.S files are used to build-in DT Overlay. They should
should not be removed by Make or the kernel will be needlessly rebuilt.
These should be removed by "clean" and ignored by git like other
intermediate files.
Reported-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Andrew Davis <afd@ti.com>
Fixes: 941214a512 ("kbuild: Allow DTB overlays to built into .dtbo.S files")
Tested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/r/20221114205939.27994-1-afd@ti.com
Signed-off-by: Rob Herring <robh@kernel.org>
Having most of the new files in place, we now enable Rust support
in the build system, including `Kconfig` entries related to Rust,
the Rust configuration printer and a few other bits.
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Co-developed-by: Alex Gaynor <alex.gaynor@gmail.com>
Signed-off-by: Alex Gaynor <alex.gaynor@gmail.com>
Co-developed-by: Finn Behrens <me@kloenk.de>
Signed-off-by: Finn Behrens <me@kloenk.de>
Co-developed-by: Adam Bratschi-Kaye <ark.email@gmail.com>
Signed-off-by: Adam Bratschi-Kaye <ark.email@gmail.com>
Co-developed-by: Wedson Almeida Filho <wedsonaf@google.com>
Signed-off-by: Wedson Almeida Filho <wedsonaf@google.com>
Co-developed-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Co-developed-by: Sven Van Asbroeck <thesven73@gmail.com>
Signed-off-by: Sven Van Asbroeck <thesven73@gmail.com>
Co-developed-by: Gary Guo <gary@garyguo.net>
Signed-off-by: Gary Guo <gary@garyguo.net>
Co-developed-by: Boris-Chengbiao Zhou <bobo1239@web.de>
Signed-off-by: Boris-Chengbiao Zhou <bobo1239@web.de>
Co-developed-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Co-developed-by: Douglas Su <d0u9.su@outlook.com>
Signed-off-by: Douglas Su <d0u9.su@outlook.com>
Co-developed-by: Dariusz Sosnowski <dsosnowski@dsosnowski.pl>
Signed-off-by: Dariusz Sosnowski <dsosnowski@dsosnowski.pl>
Co-developed-by: Antonio Terceiro <antonio.terceiro@linaro.org>
Signed-off-by: Antonio Terceiro <antonio.terceiro@linaro.org>
Co-developed-by: Daniel Xu <dxu@dxuuu.xyz>
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Co-developed-by: Björn Roy Baron <bjorn3_gh@protonmail.com>
Signed-off-by: Björn Roy Baron <bjorn3_gh@protonmail.com>
Co-developed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Signed-off-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
This is the configuration file for the `rustfmt` tool.
`rustfmt` is a tool for formatting Rust code according to style guidelines.
It is very commonly used across Rust projects.
The default configuration options are used.
Reviewed-by: Kees Cook <keescook@chromium.org>
Co-developed-by: Alex Gaynor <alex.gaynor@gmail.com>
Signed-off-by: Alex Gaynor <alex.gaynor@gmail.com>
Co-developed-by: Wedson Almeida Filho <wedsonaf@google.com>
Signed-off-by: Wedson Almeida Filho <wedsonaf@google.com>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
The `generate_rust_analyzer.py` script generates the configuration
file (`rust-project.json`) for rust-analyzer.
rust-analyzer is a modular compiler frontend for the Rust language.
It provides an LSP server which can be used in editors such as
VS Code, Emacs or Vim.
Reviewed-by: Kees Cook <keescook@chromium.org>
Co-developed-by: Alex Gaynor <alex.gaynor@gmail.com>
Signed-off-by: Alex Gaynor <alex.gaynor@gmail.com>
Co-developed-by: Finn Behrens <me@kloenk.de>
Signed-off-by: Finn Behrens <me@kloenk.de>
Co-developed-by: Wedson Almeida Filho <wedsonaf@google.com>
Signed-off-by: Wedson Almeida Filho <wedsonaf@google.com>
Co-developed-by: Gary Guo <gary@garyguo.net>
Signed-off-by: Gary Guo <gary@garyguo.net>
Co-developed-by: Boris-Chengbiao Zhou <bobo1239@web.de>
Signed-off-by: Boris-Chengbiao Zhou <bobo1239@web.de>
Co-developed-by: Björn Roy Baron <bjorn3_gh@protonmail.com>
Signed-off-by: Björn Roy Baron <bjorn3_gh@protonmail.com>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
The *.mod files have two lines; the first line lists the member objects
of the module, and the second line, if CONFIG_TRIM_UNUSED_KSYMS=y, lists
the undefined symbols.
Currently, we generate *.mod after constructing composite modules,
otherwise, we cannot compute the second line. No prerequisite is
required to print the first line.
They are orthogonal. Splitting them into separate commands will ease
further cleanups.
This commit splits the list of undefined symbols out to *.usyms files.
Previously, the list of undefined symbols ended up with a very long
line, but now it has one symbol per line.
Use sed like we did before commit 7d32358be8 ("kbuild: avoid split
lines in .mod files").
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
modules.builtin used to be created in every directory.
Since commit 8b41fc4454 ("kbuild: create modules.builtin without
Makefile.modbuiltin or tristate.conf"), modules.builtin is created only
in the top directory.
Add the '/' prefix so that it matches to only the modules.builtin located
in the top directory.
It has been more than one year since that change. I hope this will not
flood 'Untracked files' of 'git status'.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
For consistency, move tags and TAGS close to the cscope and GNU Global
patterns.
I removed the '/' prefix in case somebody wants to manually create tag
files in sub-directories.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The external module build shows the following warning if Module.symvers
is missing in the kernel tree.
WARNING: Symbol version dump "Module.symvers" is missing.
Modules may not have dependencies or modversions.
I think this is an important heads-up because the resulting modules may
not work as expected. This happens when you did not build the entire
kernel tree, for example, you might have prepared the minimal setups
for external modules by 'make defconfig && make modules_preapre'.
A problem is that 'make modules' creates Module.symvers even without
vmlinux. In this case, that warning is suppressed since Module.symvers
already exists in spite of its incomplete content.
The incomplete (i.e. invalid) Module.symvers should not be created.
This commit changes the second pass of modpost to dump symbols into
modules-only.symvers. The final Module.symvers is created by
concatenating vmlinux.symvers and modules-only.symvers if both exist.
Module.symvers is supposed to collect symbols from both vmlinux and
modules. It might be a bit confusing, and I am not quite sure if it
is an official interface, but presumably it is difficult to rename it
because some tools (e.g. kmod) parse it.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
It can be quite useful to have ld emit a link map file, in order to
debug or verify that special sections end up where they are supposed
to, and to see what LD_DEAD_CODE_DATA_ELIMINATION manages to get rid
of.
The only reason I'm not just adding this unconditionally is that the
.map file can be rather large (several MB), and that's a waste of
space when one isn't interested in these things. Also make it depend
on CONFIG_EXPERT.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
- Clang LTO build infrastructure and arm64-specific enablement (Sami Tolvanen)
- Recursive build CC_FLAGS_LTO fix (Alexander Lobakin)
-----BEGIN PGP SIGNATURE-----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=6peY
-----END PGP SIGNATURE-----
Merge tag 'clang-lto-v5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull clang LTO updates from Kees Cook:
"Clang Link Time Optimization.
This is built on the work done preparing for LTO by arm64 folks,
tracing folks, etc. This includes the core changes as well as the
remaining pieces for arm64 (LTO has been the default build method on
Android for about 3 years now, as it is the prerequisite for the
Control Flow Integrity protections).
While x86 LTO enablement is done, it depends on some pending objtool
clean-ups. It's possible that I'll send a "part 2" pull request for
LTO that includes x86 support.
For merge log posterity, and as detailed in commit dc5723b02e
("kbuild: add support for Clang LTO"), here is the lt;dr to do an LTO
build:
make LLVM=1 LLVM_IAS=1 defconfig
scripts/config -e LTO_CLANG_THIN
make LLVM=1 LLVM_IAS=1
(To do a cross-compile of arm64, add "CROSS_COMPILE=aarch64-linux-gnu-"
and "ARCH=arm64" to the "make" command lines.)
Summary:
- Clang LTO build infrastructure and arm64-specific enablement (Sami
Tolvanen)
- Recursive build CC_FLAGS_LTO fix (Alexander Lobakin)"
* tag 'clang-lto-v5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
kbuild: prevent CC_FLAGS_LTO self-bloating on recursive rebuilds
arm64: allow LTO to be selected
arm64: disable recordmcount with DYNAMIC_FTRACE_WITH_REGS
arm64: vdso: disable LTO
drivers/misc/lkdtm: disable LTO for rodata.o
efi/libstub: disable LTO
scripts/mod: disable LTO for empty.c
modpost: lto: strip .lto from module names
PCI: Fix PREL32 relocations for LTO
init: lto: fix PREL32 relocations
init: lto: ensure initcall ordering
kbuild: lto: add a default list of used symbols
kbuild: lto: merge module sections
kbuild: lto: limit inlining
kbuild: lto: fix module versioning
kbuild: add support for Clang LTO
tracing: move function tracer options to Kconfig
Add support for building DT overlays (%.dtbo). The overlay's source file
will have the usual extension, i.e. .dts, though the blob will have
.dtbo extension to distinguish it from normal blobs.
Acked-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/434ba2467dd0cd011565625aeb3450650afe0aae.1611904394.git.viresh.kumar@linaro.org
With CONFIG_MODVERSIONS, version information is linked into each
compilation unit that exports symbols. With LTO, we cannot use this
method as all C code is compiled into LLVM bitcode instead. This
change collects symbol versions into .symversions files and merges
them in link-vmlinux.sh where they are all linked into vmlinux.o at
the same time.
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20201211184633.3213045-4-samitolvanen@google.com
The default way of building documentation is to use
Sphinx toolchain installed via pip, inside the
Kernel tree main directory. That's what's recommended by:
scripts/sphinx-pre-install
As it usually provides a better version of this package
than the one installed, specially on LTS distros.
So, add the directories created by running the commands
suggested by the script.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/ac4e23d556c7d95cb11d6d5c605f43e425b2c3c7.1599660067.git.mchehab+huawei@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
For now, that's arch/x86/boot/compressed/vmlinux.bin.zst but probably more
will come, thus let's be consistent with all other compressors.
Signed-off-by: Adam Borowski <kilobyte@angband.pl>
Signed-off-by: Nick Terrell <terrelln@fb.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20200730190841.2071656-8-nickrterrell@gmail.com
Running `make savedefconfig` creates by default `defconfig`, which is,
currently, on git’s radar, for example, `git status` lists this file as
untracked.
So, add the file to `.gitignore`, so it’s ignored by git.
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The full build runs modpost twice, first for vmlinux.o and second for
modules.
The first pass dumps all the vmlinux symbols into Module.symvers, but
the second pass parses vmlinux again instead of reusing the dump file,
presumably because it needs to avoid accumulating stale symbols.
Loading symbol info from a dump file is faster than parsing an ELF object.
Besides, modpost deals with various issues to parse vmlinux in the second
pass.
A solution is to make the first pass dumps symbols into a separate file,
vmlinux.symvers. The second pass reads it, and parses module .o files.
The merged symbol information is dumped into Module.symvers in the same
way as before.
This makes further modpost cleanups possible.
Also, it fixes the problem of 'make vmlinux', which previously overwrote
Module.symvers, throwing away module symbols.
I slightly touched scripts/link-vmlinux.sh so that vmlinux is re-linked
when you cross this commit. Otherwise, vmlinux.symvers would not be
generated.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The modpost, with the -d option given, generates per-module .ns_deps
files.
Kbuild generates per-module .mod files to carry module information.
This is convenient because Make handles multiple jobs in parallel
when the -j option is given.
On the other hand, the modpost always runs as a single thread.
I do not see a strong reason to produce separate .ns_deps files.
This commit changes the modpost to generate just one file,
modules.nsdeps, each line of which has the following format:
<module_name>: <list of missing namespaces>
Please note it contains *missing* namespaces instead of required ones.
So, modules.nsdeps is empty if the namespace dependency is all good.
This will work more efficiently because spatch will no longer process
already imported namespaces. I removed the '(if needed)' from the
nsdeps log since spatch is invoked only when needed.
This also solves the stale .ns_deps problem reported by Jessica Yu:
https://lkml.org/lkml/2019/10/28/467
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: Jessica Yu <jeyu@kernel.org>
Acked-by: Jessica Yu <jeyu@kernel.org>
Reviewed-by: Matthias Maennich <maennich@google.com>
Tested-by: Matthias Maennich <maennich@google.com>
Summary of modules changes for the 5.4 merge window:
- Introduce exported symbol namespaces.
This new feature allows subsystem maintainers to partition and
categorize their exported symbols into explicit namespaces. Module
authors are now required to import the namespaces they need.
Some of the main motivations of this feature include: allowing kernel
developers to better manage the export surface, allow subsystem
maintainers to explicitly state that usage of some exported symbols
should only be limited to certain users (think: inter-module or
inter-driver symbols, debugging symbols, etc), as well as more easily
limiting the availability of namespaced symbols to other parts of the
kernel. With the module import requirement, it is also easier to spot
the misuse of exported symbols during patch review. Two new macros are
introduced: EXPORT_SYMBOL_NS() and EXPORT_SYMBOL_NS_GPL(). The API is
thoroughly documented in Documentation/kbuild/namespaces.rst.
- Some small code and kbuild cleanups here and there.
-----BEGIN PGP SIGNATURE-----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=72Uy
-----END PGP SIGNATURE-----
Merge tag 'modules-for-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux
Pull modules updates from Jessica Yu:
"The main bulk of this pull request introduces a new exported symbol
namespaces feature. The number of exported symbols is increasingly
growing with each release (we're at about 31k exports as of 5.3-rc7)
and we currently have no way of visualizing how these symbols are
"clustered" or making sense of this huge export surface.
Namespacing exported symbols allows kernel developers to more
explicitly partition and categorize exported symbols, as well as more
easily limiting the availability of namespaced symbols to other parts
of the kernel. For starters, we have introduced the USB_STORAGE
namespace to demonstrate the API's usage. I have briefly summarized
the feature and its main motivations in the tag below.
Summary:
- Introduce exported symbol namespaces.
This new feature allows subsystem maintainers to partition and
categorize their exported symbols into explicit namespaces. Module
authors are now required to import the namespaces they need.
Some of the main motivations of this feature include: allowing
kernel developers to better manage the export surface, allow
subsystem maintainers to explicitly state that usage of some
exported symbols should only be limited to certain users (think:
inter-module or inter-driver symbols, debugging symbols, etc), as
well as more easily limiting the availability of namespaced symbols
to other parts of the kernel.
With the module import requirement, it is also easier to spot the
misuse of exported symbols during patch review.
Two new macros are introduced: EXPORT_SYMBOL_NS() and
EXPORT_SYMBOL_NS_GPL(). The API is thoroughly documented in
Documentation/kbuild/namespaces.rst.
- Some small code and kbuild cleanups here and there"
* tag 'modules-for-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
module: Remove leftover '#undef' from export header
module: remove unneeded casts in cmp_name()
module: move CONFIG_UNUSED_SYMBOLS to the sub-menu of MODULES
module: remove redundant 'depends on MODULES'
module: Fix link failure due to invalid relocation on namespace offset
usb-storage: export symbols in USB_STORAGE namespace
usb-storage: remove single-use define for debugging
docs: Add documentation for Symbol Namespaces
scripts: Coccinelle script for namespace dependencies.
modpost: add support for generating namespace dependencies
export: allow definition default namespaces in Makefiles or sources
module: add config option MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS
modpost: add support for symbol namespaces
module: add support for symbol namespaces.
export: explicitly align struct kernel_symbol
module: support reading multiple values per modinfo tag
This patch adds an option to modpost to generate a <module>.ns_deps file
per module, containing the namespace dependencies for that module.
E.g. if the linked module my-module.ko would depend on the symbol
myfunc.MY_NS in the namespace MY_NS, the my-module.ns_deps file created
by modpost would contain the entry MY_NS to express the namespace
dependency of my-module imposed by using the symbol myfunc.
These files can subsequently be used by static analysis tools (like
coccinelle scripts) to address issues with missing namespace imports. A
later patch of this series will introduce such a script 'nsdeps' and a
corresponding make target to automatically add missing
MODULE_IMPORT_NS() definitions to the module's sources. For that it uses
the information provided in the generated .ns_deps files.
Co-developed-by: Martijn Coenen <maco@android.com>
Signed-off-by: Martijn Coenen <maco@android.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Matthias Maennich <maennich@google.com>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
The pattern '*.order' was added by commit c6025f4c8b ("kbuild: ignore
*.order files") to ignore modules.order files.
I do not see any other user of the '.order' extension.
Ignore 'modules.order' explicitly instead of '*.order'.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
This file is used by clangd to use language server protocol.
It can be generated at each compile using scripts/gen_compile_commands.py.
Therefore it is different depending on the environment and should be
ignored.
Signed-off-by: Toru Komatsu <k0ma@utam0k.jp>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
While descending directories, Kbuild produces objects for modules,
but do not link final *.ko files; it is done in the modpost.
To keep track of modules, Kbuild creates a *.mod file in $(MODVERDIR)
for every module it is building. Some post-processing steps read the
necessary information from *.mod files. This avoids descending into
directories again. This mechanism was introduced in 2003 or so.
Later, commit 551559e13a ("kbuild: implement modules.order") added
modules.order. So, we can simply read it out to know all the modules
with directory paths. This is easier than parsing the first line of
*.mod files.
$(MODVERDIR) has a flat directory structure, that is, *.mod files
are named only with base names. This is based on the assumption that
the module name is unique across the tree. This assumption is really
fragile.
Stephen Rothwell reported a race condition caused by a module name
conflict:
https://lkml.org/lkml/2019/5/13/991
In parallel building, two different threads could write to the same
$(MODVERDIR)/*.mod simultaneously.
Non-unique module names are the source of all kind of troubles, hence
commit 3a48a91901 ("kbuild: check uniqueness of module names")
introduced a new checker script.
However, it is still fragile in the build system point of view because
this race happens before scripts/modules-check.sh is invoked. If it
happens again, the modpost will emit unclear error messages.
To fix this issue completely, create *.mod with full directory path
so that two threads never attempt to write to the same file.
$(MODVERDIR) is no longer needed.
Since modules with directory paths are listed in modules.order, Kbuild
is still able to find *.mod files without additional descending.
I also killed cmd_secanalysis; scripts/mod/sumversion.c computes MD4 hash
for modules with MODULE_VERSION(). When CONFIG_DEBUG_SECTION_MISMATCH=y,
it occurs not only in the modpost stage, but also during directory
descending, where sumversion.c may parse stale *.mod files. It would emit
'No such file or directory' warning when an object consisting a module is
renamed, or when a single-obj module is turned into a multi-obj module or
vice versa.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Nicolas Pitre <nico@fluxnic.net>
Also, sort the patterns alphabetically. Update the comment since
we have non-git files here.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
For completeness, ignore all the allconfig variants.
I added a leading slash because they are only searched in the
top of the tree.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Problem:
When a kernel module is compiled as a separate module, some important
information about the kernel module is available via .modinfo section of
the module. In contrast, when the kernel module is compiled into the
kernel, that information is not available.
Information about built-in modules is necessary in the following cases:
1. When it is necessary to find out what additional parameters can be
passed to the kernel at boot time.
2. When you need to know which module names and their aliases are in
the kernel. This is very useful for creating an initrd image.
Proposal:
The proposed patch does not remove .modinfo section with module
information from the vmlinux at the build time and saves it into a
separate file after kernel linking. So, the kernel does not increase in
size and no additional information remains in it. Information is stored
in the same format as in the separate modules (null-terminated string
array). Because the .modinfo section is already exported with a separate
modules, we are not creating a new API.
It can be easily read in the userspace:
$ tr '\0' '\n' < modules.builtin.modinfo
ext4.softdep=pre: crc32c
ext4.license=GPL
ext4.description=Fourth Extended Filesystem
ext4.author=Remy Card, Stephen Tweedie, Andrew Morton, Andreas Dilger, Theodore Ts'o and others
ext4.alias=fs-ext4
ext4.alias=ext3
ext4.alias=fs-ext3
ext4.alias=ext2
ext4.alias=fs-ext2
md_mod.alias=block-major-9-*
md_mod.alias=md
md_mod.description=MD RAID framework
md_mod.license=GPL
md_mod.parmtype=create_on_open:bool
md_mod.parmtype=start_dirty_degraded:int
...
Co-Developed-by: Gleb Fotengauer-Malinovskiy <glebfm@altlinux.org>
Signed-off-by: Gleb Fotengauer-Malinovskiy <glebfm@altlinux.org>
Signed-off-by: Alexey Gladkov <gladkov.alexey@gmail.com>
Acked-by: Jessica Yu <jeyu@kernel.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
This adds the build infrastructure for checking DT binding schema
documents and validating dts files using the binding schema.
Check DT binding schema documents:
make dt_binding_check
Build dts files and check using DT binding schema:
make dtbs_check
Optionally, DT_SCHEMA_FILES can be passed in with a schema file(s) to
use for validation. This makes it easier to find and fix errors
generated by a specific schema.
Currently, the validation targets are separate from a normal build to
avoid a hard dependency on the external DT schema project and because
there are lots of warnings generated.
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Mark Rutland <mark.rutland@arm.com>
Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Michal Marek <michal.lkml@markovi.net>
Cc: linux-doc@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: linux-kbuild@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
- pass HOSTLDFLAGS when compiling single .c host programs
- build genksyms lexer and parser files instead of using shipped
versions
- rename *-asn1.[ch] to *.asn1.[ch] for suffix consistency
- let the top .gitignore globally ignore artifacts generated by
flex, bison, and asn1_compiler
- let the top Makefile globally clean artifacts generated by
flex, bison, and asn1_compiler
- use safer .SECONDARY marker instead of .PRECIOUS to prevent
intermediate files from being removed
- support -fmacro-prefix-map option to make __FILE__ a relative path
- fix # escaping to prepare for the future GNU Make release
- clean up deb-pkg by using debian tools instead of handrolled
source/changes generation
- improve rpm-pkg portability by supporting kernel-install as a
fallback of new-kernel-pkg
- extend Kconfig listnewconfig target to provide more information
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=tD6R
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v4.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull more Kbuild updates from Masahiro Yamada:
- pass HOSTLDFLAGS when compiling single .c host programs
- build genksyms lexer and parser files instead of using shipped
versions
- rename *-asn1.[ch] to *.asn1.[ch] for suffix consistency
- let the top .gitignore globally ignore artifacts generated by flex,
bison, and asn1_compiler
- let the top Makefile globally clean artifacts generated by flex,
bison, and asn1_compiler
- use safer .SECONDARY marker instead of .PRECIOUS to prevent
intermediate files from being removed
- support -fmacro-prefix-map option to make __FILE__ a relative path
- fix # escaping to prepare for the future GNU Make release
- clean up deb-pkg by using debian tools instead of handrolled
source/changes generation
- improve rpm-pkg portability by supporting kernel-install as a
fallback of new-kernel-pkg
- extend Kconfig listnewconfig target to provide more information
* tag 'kbuild-v4.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kconfig: extend output of 'listnewconfig'
kbuild: rpm-pkg: use kernel-install as a fallback for new-kernel-pkg
Kbuild: fix # escaping in .cmd files for future Make
kbuild: deb-pkg: split generating packaging and build
kbuild: use -fmacro-prefix-map to make __FILE__ a relative path
kbuild: mark $(targets) as .SECONDARY and remove .PRECIOUS markers
kbuild: rename *-asn1.[ch] to *.asn1.[ch]
kbuild: clean up *-asn1.[ch] patterns from top-level Makefile
.gitignore: move *-asn1.[ch] patterns to the top-level .gitignore
kbuild: add %.dtb.S and %.dtb to 'targets' automatically
kbuild: add %.lex.c and %.tab.[ch] to 'targets' automatically
genksyms: generate lexer and parser during build instead of shipping
kbuild: clean up *.lex.c and *.tab.[ch] patterns from top-level Makefile
.gitignore: move *.lex.c *.tab.[ch] patterns to the top-level .gitignore
kbuild: use HOSTLDFLAGS for single .c executables
clang-format is a tool to format C/C++/... code according to a set of
rules and heuristics. Like most tools, it is not perfect nor covers
every single case, but it is good enough to be helpful.
In particular, it is useful for quickly re-formatting blocks of code
automatically, for reviewing full files in order to spot coding style
mistakes, typos and possible improvements. It is also handy for sorting
``#includes``, for aligning variables and macros, for reflowing text and
other similar tasks. It also serves as a teaching tool/guide for
newcomers.
The tool itself has been already included in the repositories of popular
Linux distributions for a long time. The rules in this file are
intended for clang-format >= 4, which is easily available in most
distributions.
This commit adds the configuration file that contains the rules that the
tool uses to know how to format the code according to the kernel coding
style. This gives us several advantages:
* clang-format works out of the box with reasonable defaults;
avoiding that everyone has to re-do the configuration.
* Everyone agrees (eventually) on what is the most useful default
configuration for most of the kernel.
* If it becomes commonplace among kernel developers, clang-format
may feel compelled to support us better. They already recognize
the Linux kernel and its style in their documentation and in one
of the style sub-options.
Some of clang-format's features relevant for the kernel are:
* Uses clang's tooling support behind the scenes to parse and rewrite
the code. It is not based on ad-hoc regexps.
* Supports reasonably well the Linux kernel coding style.
* Fast enough to be used at the press of a key.
* There are already integrations (either built-in or third-party)
for many common editors used by kernel developers (e.g. vim,
emacs, Sublime, Atom...) that allow you to format an entire file
or, more usefully, just your selection.
* Able to parse unified diffs -- you can, for instance, reformat
only the lines changed by a git commit.
* Able to reflow text comments as well.
* Widely supported and used by hundreds of developers in highly
complex projects and organizations (e.g. the LLVM project itself,
Chromium, WebKit, Google, Mozilla...). Therefore, it will be
supported for a long time.
See more information about the tool at:
https://clang.llvm.org/docs/ClangFormat.htmlhttps://clang.llvm.org/docs/ClangFormatStyleOptions.html
Link: http://lkml.kernel.org/r/20180318171632.qfkemw3mwbcukth6@gmail.com
Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Andy Whitcroft <apw@canonical.com>
Cc: Joe Perches <joe@perches.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Our convention is to distinguish file types by suffixes with a period
as a separator.
*-asn1.[ch] is a different pattern from other generated sources such
as *.lex.c, *.tab.[ch], *.dtb.S, etc. More confusing, files with
'-asn1.[ch]' are generated files, but '_asn1.[ch]' are checked-in
files:
net/netfilter/nf_conntrack_h323_asn1.c
include/linux/netfilter/nf_conntrack_h323_asn1.h
include/linux/sunrpc/gss_asn1.h
Rename generated files to *.asn1.[ch] for consistency.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
These patterns are common to host programs that require lexer and parser.
Move them to the top .gitignore.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Frank Rowand <frowand.list@gmail.com>
The idea of using fixdep was inspired by Kconfig, but autoksyms
belongs to a different group. So, I want to move those touched
files under include/config/ksym/ to include/ksym/.
The directory include/ksym/ can be removed by 'make clean' because
it is meaningless for the external module building.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Nicolas Pitre <nico@linaro.org>
when build kernel with default configure, files:
generatenet/ipv4/netfilter/nf_nat_snmp_basic-asn1.c
net/ipv4/netfilter/nf_nat_snmp_basic-asn1.h
will be automatically generated by ASN.1 compiler, so
No need to track them in git, it's better to ignore them.
Signed-off-by: Zhu Lingshan <lszhu@suse.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Following in footsteps of other targets like 'deb-pkg, 'rpm-pkg' and 'tar-pkg',
this patch adds a 'snap-pkg' target for the creation of a Linux kernel snap
package using the kbuild infrastructure.
A snap, in its general form, is a self contained, sandboxed, universal package
and it is intended to work across multiple distributions and/or devices. A snap
package is distributed as a single compressed squashfs filesystem.
A kernel snap is a snap package carrying the Linux kernel, kernel modules,
accessory files (DTBs, System.map, etc) and a manifesto file. The purpose of a
kernel snap is to carry the Linux kernel during the creation of a system image,
eg. Ubuntu Core, and its subsequent upgrades.
For more information on snap packages: https://snapcraft.io/docs/
Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
- Clean up and fix RPM package build
- Fix a warning in DEB package build
- Improve coccicheck script
- Improve some semantic patches
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=7aYW
-----END PGP SIGNATURE-----
Merge tag 'kbuild-misc-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild misc updates from Masahiro Yamada:
- Clean up and fix RPM package build
- Fix a warning in DEB package build
- Improve coccicheck script
- Improve some semantic patches
* tag 'kbuild-misc-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
docs: dev-tools: coccinelle: delete out of date wiki reference
coccinelle: orplus: reorganize to improve performance
coccinelle: use exists to improve efficiency
builddeb: Pass the kernel:debarch substvar to dpkg-genchanges
Coccinelle: use false positive annotation
coccinelle: fix verbose message about .cocci file being run
coccinelle: grep Options and Requires fields more precisely
Coccinelle: make DEBUG_FILE option more useful
coccinelle: api: detect identical chip data arrays
coccinelle: Improve setup_timer.cocci matching
Coccinelle: setup_timer: improve messages from setup_timer
kbuild: rpm-pkg: do not force -jN in submake
kbuild: rpm-pkg: keep spec file until make mrproper
kbuild: rpm-pkg: fix jobserver unavailable warning
kbuild: rpm-pkg: replace $RPM_BUILD_ROOT with %{buildroot}
kbuild: rpm-pkg: fix build error when CONFIG_MODULES is disabled
kbuild: rpm-pkg: refactor mkspec with here doc
kbuild: rpm-pkg: clean up mkspec
kbuild: rpm-pkg: install vmlinux.bz2 unconditionally
kbuild: rpm-pkg: remove ppc64 specific image handling
If build fails during (bin)rpm-pkg, the spec file is not cleaned by
anyone until the next successful build of the package.
We do not have to immediately delete the spec file in case somebody
may want to take a look at it. Instead, make them ignored by git,
and cleaned up by make mrproper.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Most of DT files are compiled under arch/*/boot/dts/, but we have some
other directories, like drivers/of/unittest-data/. We often miss to
add gitignore patterns per directory. Since there are no source files
that end with .dtb or .dtb.S, we can ignore the patterns globally.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Rob Herring <robh@kernel.org>
We are having more and more ignore patterns. Sort the list
alphabetically. We will easily catch duplicated patterns if any.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Add rules to kbuild in order to generate LLVM assembly files with the .ll
extension when using clang.
# from c code
make CC=clang kernel/pid.ll
Signed-off-by: Vinícius Tinti <viniciustinti@gmail.com>
Signed-off-by: Behan Webster <behanw@converseincode.com>
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Pull misc kbuild updates from Michal Marek:
- coccicheck script improvements by Luis Rodriguez and Deepa Dinamani
- new coccinelle patches by Yann Droneaud and Vaishali Thakkar
- debian packaging fixes by Wilfried Klaebe, Henning Schild and Marcin
Mielniczuk
* 'misc' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
Fix the Debian packaging script on systems with no codename
builddeb: fix file permissions before packaging
scripts/coccinelle: require coccinelle >= 1.0.4 on device_node_continue.cocci
coccicheck: refer to Documentation/coccinelle.txt and wiki
coccicheck: add support for requring a coccinelle version
scripts: add Linux .cocciconfig for coccinelle
coccicheck: replace --very-quiet with --quiet when debugging
coccicheck: add support for DEBUG_FILE
coccicheck: enable parmap support
coccicheck: make SPFLAGS more useful
coccicheck: move spatch binary check up
builddeb: really include objtool binary in headers package
coccinelle: catch krealloc() on devm_*() allocated memory
coccinelle: recognize more devm_* memory allocation functions
coccinelle: also catch kzfree() issues
coccicheck: Allow for overriding spatch flags
Coccinelle: noderef: Add new rules and correct the old rule
Coccinelle supports reading .cocciconfig, the order of precedence for
variables for .cocciconfig is as follows:
o Your current user's home directory is processed first
o Your directory from which spatch is called is processed next
o The directory provided with the --dir option is processed last, if used
Since coccicheck runs through make, it naturally runs from the kernel
proper dir, as such the second rule above would be implied for picking up a
.cocciconfig when using 'make coccicheck'.
'make coccicheck' also supports using M= targets.If you do not supply
any M= target, it is assumed you want to target the entire kernel.
The kernel coccicheck script has:
if [ "$KBUILD_EXTMOD" = "" ] ; then
OPTIONS="--dir $srctree $COCCIINCLUDE"
else
OPTIONS="--dir $KBUILD_EXTMOD $COCCIINCLUDE"
fi
KBUILD_EXTMOD is set when an explicit target with M= is used. For both cases
the spatch --dir argument is used, as such third rule applies when
whether M= is used or not, and when M= is used the target directory can
have its own .cocciconfig file. When M= is not passed as an argument to
coccicheck the target directory is the same as the directory from where
spatch was called.
If not using the kernel's coccicheck target, keep the above precedence order
logic of .cocciconfig reading. If using the kernel's coccicheck target,
override any of the kernel's .coccicheck's settings using SPFLAGS.
We help Coccinelle when used against Linux with a set of sensible defaults
options for Linux with our own Linux .cocciconfig. This hints to coccinelle
git can be used for 'git grep' queries over coccigrep. A timeout of 200
seconds should suffice for now.
The options picked up by coccinelle when reading a .cocciconfig do not appear
as arguments to spatch processes running on your system, to confirm what
options will be used by Coccinelle run:
spatch --print-options-only
You can override with your own preferred index option by using SPFLAGS.
Coccinelle supports both glimpse and idutils. Glimpse had historically
provided the best performance, however recent benchmarks reveal idutils
is performing just as well. Due to some recent fixes however you however
will need at least coccinelle >= 1.0.6 if using idutils.
Coccinelle carries a script scripts/idutils_index.sh which creates the
idutils database with as follows:
mkid -i C --output .id-utils.index
If using just "--use-idutils" coccinelle expects your idutils database to be
on the top level of the kernel as a file named ".id-utils.index". If you do
not use this you can symlink your database file to it, or you can specify the
database file following the "--use-idutils" argument. Examples:
make SPFLAGS=--use-idutils coccicheck
This assumes you have $srctree/.id-utils.index, where $srctree is
the top level of the kernel.
make SPFLAGS="--use-idutils /full-path/to/ID" coccicheck
Here you specify the full path of the idutils ID database. Using
.cocciconfig is possible, however given the order of precedence followed
by Coccinelle, and since the kernel now carries its own .cocciconfig,
you will need to use SPFLAGS to use idutils if desired.
v4:
o Recommend upgrade for using idutils with coccinelle due to some
recent fixes.
o Refer to using --print-options-only for testing what options are
picked up by .cocciconfig reading.
o Expand commit log considerably explaining *why* .cocconfig from
two precedence rules are used when using coccicheck, and how to
properly override these if needed.
o Expand Documentation/coccinelle.txt
v3: Expand commit log a bit more
Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Michal Marek <mmarek@suse.com>
This patch allows to build the whole kernel with GCC plugins. It was ported from
grsecurity/PaX. The infrastructure supports building out-of-tree modules and
building in a separate directory. Cross-compilation is supported too.
Currently the x86, arm, arm64 and uml architectures enable plugins.
The directory of the gcc plugins is scripts/gcc-plugins. You can use a file or a directory
there. The plugins compile with these options:
* -fno-rtti: gcc is compiled with this option so the plugins must use it too
* -fno-exceptions: this is inherited from gcc too
* -fasynchronous-unwind-tables: this is inherited from gcc too
* -ggdb: it is useful for debugging a plugin (better backtrace on internal
errors)
* -Wno-narrowing: to suppress warnings from gcc headers (ipa-utils.h)
* -Wno-unused-variable: to suppress warnings from gcc headers (gcc_version
variable, plugin-version.h)
The infrastructure introduces a new Makefile target called gcc-plugins. It
supports all gcc versions from 4.5 to 6.0. The scripts/gcc-plugin.sh script
chooses the proper host compiler (gcc-4.7 can be built by either gcc or g++).
This script also checks the availability of the included headers in
scripts/gcc-plugins/gcc-common.h.
The gcc-common.h header contains frequently included headers for GCC plugins
and it has a compatibility layer for the supported gcc versions.
The gcc-generate-*-pass.h headers automatically generate the registration
structures for GIMPLE, SIMPLE_IPA, IPA and RTL passes.
Note that 'make clean' keeps the *.so files (only the distclean or mrproper
targets clean all) because they are needed for out-of-tree modules.
Based on work created by the PaX Team.
Signed-off-by: Emese Revfy <re.emese@gmail.com>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Michal Marek <mmarek@suse.com>
