Rationale behind this change:
- F2x1xx addresses were stopped from being mapped explicitly to DCT1
from F15h (OR) onwards. They use _dct[0:1] mechanism to access the
registers. So we should move away from using address ranges to select
DCT for these families.
- On newer processors, the address ranges used to indicate DCT1 (0x140,
0x1a0) have different meanings than what is assumed currently.
Changes introduced:
- amd64_read_dct_pci_cfg() now takes in dct value and uses it for
'selecting the dct'
- Update usage of the function. Keep in mind that different families
have specific handling requirements
- Remove [k8|f10]_read_dct_pci_cfg() as they don't do much different
from amd64_read_pci_cfg()
- Move the k8 specific check to amd64_read_pci_cfg
- Remove f15_read_dct_pci_cfg() and move logic to amd64_read_dct_pci_cfg()
- Remove now needless .read_dct_pci_cfg
Testing:
- Tested on Fam 10h; Fam15h Models: 00h, 30h; Fam16h using 'EDAC_DEBUG'
and mce_amd_inj
- driver obtains info from F2x registers and caches it in pvt
structures correctly
- ECC decoding works fine
Signed-off-by: Aravind Gopalakrishnan <aravind.gopalakrishnan@amd.com>
Link: http://lkml.kernel.org/r/1410799058-3149-1-git-send-email-aravind.gopalakrishnan@amd.com
Signed-off-by: Borislav Petkov <bp@suse.de>
Extend ECC decoding support for F16h M30h. Tested on F16h M30h with ECC
turned on using mce_amd_inj module and the patch works fine.
Signed-off-by: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com>
Link: http://lkml.kernel.org/r/1392913726-16961-1-git-send-email-Aravind.Gopalakrishnan@amd.com
Tested-by: Arindam Nath <Arindam.Nath@amd.com>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
GENMASK is used to create a contiguous bitmask([hi:lo]). It is
implemented twice in current kernel. One is in EDAC driver, the other
is in SiS/XGI FB driver. Move it to a more generic place for other
usage.
Signed-off-by: Chen, Gong <gong.chen@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Thomas Winischhofer <thomas@winischhofer.net>
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Borislav Petkov <bp@suse.de>
Acked-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Now that we cache (family, model, stepping) locally, use them instead of
boot_cpu_data.
No functionality change.
Signed-off-by: Borislav Petkov <bp@suse.de>
On newer models, support has been included for upto 4 DCT's, however,
only DCT0 and DCT3 are currently configured (cf BKDG Section 2.10).
Also, the routing DRAM Requests algorithm is different for F15h M30h.
Thus it is cleaner to use a brand new function rather than adding quirks
to the more generic f1x_match_to_this_node(). Refer to "2.10.5 DRAM
Routing Requests" in the BKDG for further info.
Tested on Fam15h M30h with ECC turned on using mce_amd_inj facility and
verified to be functionally correct.
While at it, verify if erratum workarounds for E505 and E637 still hold.
From email conversations within AMD, the current status of the errata
is:
* Erratum 505: fixed in model 0x1, stepping 0x1 and later.
* Erratum 637: not fixed.
Signed-off-by: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com>
[ Cleanups, corrections ]
Signed-off-by: Borislav Petkov <bp@suse.de>
Add code to handle DRAM ECC errors decoding for Fam16h.
Tested on Fam16h with ECC turned on using the mce_amd_inj facility and
works fine.
Signed-off-by: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com>
[ Boris: cleanups and clarifications ]
Signed-off-by: Borislav Petkov <bp@suse.de>
Use appropriate types for northbridge IDs and memory ranges. Mark
immutable data const and keep within compilation unit on related
structures.
Signed-off-by: Daniel J Blueman <daniel@numascale-asia.com>
Link: http://lkml.kernel.org/r/1354265060-22956-2-git-send-email-daniel@numascale-asia.com
[Boris: Drop arg change to node_to_amd_nb]
Signed-off-by: Borislav Petkov <bp@alien8.de>
Fix get_node_id to match northbridge IDs from the array of detected
ones, allowing multi-server support such as with Numascale's
NumaConnect, renaming to 'amd_get_node_id' for consistency.
Signed-off-by: Daniel J Blueman <daniel@numascale-asia.com>
Link: http://lkml.kernel.org/r/1353997932-8475-1-git-send-email-daniel@numascale-asia.com
[Boris: shorten lines to fit 80 cols]
Signed-off-by: Borislav Petkov <bp@alien8.de>
Instead of open-coding it, use the DBAM_DIMM macro in
amd64_csrow_nr_pages() which we have already.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Rewrite CE/UE paths so that they use the same code and drop additional
code duplication in handle_ue. Add a struct err_info which collects
required info for the error reporting. This, in turn, helps slimming all
edac_mc_handle_error() calls down to one.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
When injecting DRAM ECC errors over the F3xB[8,C] interface, the machine
does this by injecting the error in the next non-cached access. This
takes relatively long time on a normal system so that in order for us to
expedite it, we disable the caches around the injection.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Invert kstrtoul return value testing and win one indentation level.
Also, shorten up macro names so that the lines can fit into 80 cols. No
functional change.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Now that the EDAC core supports struct device, there's no sense
on having any logic at the EDAC core to simulate it. So, instead
of adding such logic there, change the logic at amd64_edac to
use it.
Reviewed-by: Aristeu Rozanski <arozansk@redhat.com>
Cc: Doug Thompson <norsk5@yahoo.com>
Cc: Borislav Petkov <borislav.petkov@amd.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
F15h CPUs may report a non-DRAM address when reporting an error address
belonging to a CC6 state save area. Add a workaround to detect this
condition and compute the actual DRAM address of the error as documented
in the Revision Guide for AMD Family 15h Models 00h-0Fh Processors.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
F15h and later use a portion of DRAM as a CC6 storage area. BIOS
programs D18F1x[17C:140,7C:40] DRAM Base/Limit accordingly by
subtracting the storage area from the DRAM limit setting. However, in
order for edac to consider that part of DRAM too, we need to include it
into the per-node range.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
A node id can never be negative since we use it as an index into
the DRAM ranges array. This also makes one of the BUG_ON conditions
redundant.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Add the PCI device ids required for driver registration. Remove
pvt->ctl_name and use the family descriptor directly, instead. Then,
bump driver version and fixup its format. Finally, enable DRAM ECC
decoding on F15h.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
F15h has the same ECC symbol size options as F10h revD and later so
adjust checks to that. Simplify code a bit.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Drop static tables which map the bits in F2x80 to a chip select size in
favor of functions doing the mapping with some bit fiddling. Also, add
F15 support.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
This function is relevant for F10h and higher, and it has only one
callsite so drop its function pointer from the low_ops struct.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Replace per-DCT macros with smarter ones, drop hack and look for the
spare rank on all chip selects on a channel.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
On revC3 and revE Fam10h machines and later, non-interleaved graphics
framebuffer memory under the 16G mark can be swapped with a region
located at the bottom of memory so that the GPU can use the interleaved
region and thus two channels. Add support for that.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
The address bits from MC4_STATUS differ only between K8 and the rest so
no need for a per-family method.
No functional change.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Use the struct mce directly instead of copying from it into a custom
struct err_regs.
No functionality change.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
The fact whether we are chipkill capable or not does not have any
bearing when computing the channel index on a ganged DCT configuration
so remove that. Also, simplify debug statements. Finally, remove old
error injection leftovers, while at it.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Remove family names from macro names, drop single bit defines and
comment their meaning instead.
No functional change.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
* Restrict DCT ganged mode check since only Fam10h supports it
* Adjust DRAM type detection for BD since it only supports DDR3
* Remove second and thus unneeded DCLR read in k8_early_channel_count() - we do
that in read_mc_regs()
* Cleanup comments and remove family names from register macros
* Remove unused defines
There should be no functional change resulting from this patch.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
This function maps the system address to the normalized DCT address.
Document what the code does for more clarity and wrap insane bitmasks in
a more understandable macro which generates them. Also, reduce number of
arguments passed to the function. Finally, rename this function to what
it actually does.
No functional change.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Add a struct representing the DRAM chip select base/limit register
pairs. Concentrate all CS handling in a single function. Also, add CS
looping macros for cleaner, more readable code. While at it, adjust code
to F15h. Finally, do smaller macro names cleanups (remove family names
from register macros) and debug messages clarification.
No functional change.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Add a struct representing the DRAM base/limit range pairs and remove all
cached subfields. Replace them with accessor functions, which actually
saves us some space:
text data bss dec hex filename
14712 1577 336 16625 40f1 drivers/edac/amd64_edac_mod.o.after
14831 1609 336 16776 4188 drivers/edac/amd64_edac_mod.o.before
Also, it simplifies the code a lot allowing to merge the K8 and F10h
routines.
No functional change.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
F15h "multiplexes" between the configuration space of the two DRAM
controllers by toggling D18F1x10C[DctCfgSel] while F10h has a different
set of registers for DCT0, and DCT1 in extended PCI config space.
Add DCT configuration space accessors per family thus wrapping all the
different access prerequisites. Clean up code while at it, shorten
names.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Make the ->{get|set}_sdram_scrub_rate return the actual scrub rate
bandwidth it succeeded setting and remove superfluous arg pointer used
for that. A negative value returned still means that an error occurred
while setting the scrubrate. Document this for future reference.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
This is in preparation for the init path reorganization where we want
only to
1) test whether a particular node supports ECC
2) can it be enabled
and only then do the necessary allocation/initialization. For that,
we need to decouple the ECC settings of the node from the instance's
descriptor.
The should be no functional change introduced by this patch.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
PCI ECS is being enabled by default since 2.6.26 on AMD so this code is
just superfluous now, remove it.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Remove static allocation in favor of dynamically allocating space for as
many driver instances as northbridges present on the system.
There should be no functional change resulting from this patch.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Add a macro per printk level, shorten up error messages. Add relevant
information to KERN_INFO level. No functional change.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Rename variables representing PCI devices to their BKDG names for faster
search and shorter, clearer code.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Move the remaining per-family init code into the proper place and
simplify the rest of the initialization. Reorganize error handling in
amd64_init_one_instance().
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Run a per-family init function which does all the settings based on
the family this driver instance is running on. Move the scrubrate
calculation in it and simplify code.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Drop "edac_" string from the filenames since they're prefixed with edac/
in their pathname anyway.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
