The comment above nc_vendor_write() suggests that the function could become
async so that is usable in `in_interrupt()' context or that it already is
safe to be called from such a context.
Eitherway: The function did not become async since v2.4.9.2 (2002) and it
must be not be called from `in_interrupt()' context because it sleeps on
mutltiple occations.
Remove the misleading comment.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
kaweth_async_set_rx_mode() invokes kaweth_contol() and has two callers:
- kaweth_open() which is invoked from preemptible context
.
- kaweth_start_xmit() which holds a spinlock and has bottom halfs disabled.
If called from kaweth_start_xmit() kaweth_async_set_rx_mode() obviously
cannot block, which means it can't call kaweth_control(). This is detected
with an in_interrupt() check.
Replace the in_interrupt() check in kaweth_async_set_rx_mode() with an
argument which is set true by the caller if the context is safe to sleep,
otherwise false.
Now kaweth_control() is only called from preemptible context which means
there is no need for GFP_ATOMIC allocations anymore. Replace it with
usb_control_msg(). Cleanup the code a bit while at it.
Finally remove kaweth_control() since the last user is gone.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
kaweth_control() is almost the same as usb_control_msg() except for the
memory allocation mode (GFP_ATOMIC vs GFP_NOIO) and the in_interrupt()
check.
All the invocations of kaweth_control() are within the probe function in
fully preemtible context so there is no reason to use atomic allocations,
GFP_NOIO which is used by usb_control_msg() is perfectly fine.
Replace kaweth_control() invocations from probe with usb_control_msg().
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
in_interrupt() is ill defined and does not provide what the name
suggests. The usage especially in driver code is deprecated and
a tree wide effort to clean up and consolidate the (ab)usage of
in_interrupt() and related checks is happening.
handle_regs_int() is always invoked as part of URB callback which is either
invoked from hard or soft interrupt context.
Remove the magic assertion.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
vxge_os_dma_malloc() and vxge_os_dma_malloc_async() are both called from
callchains which use GFP_KERNEL allocations unconditionally or have other
requirements to be called from fully preemptible task context..
vxge_os_dma_malloc():
1) __vxge_hw_blockpool_create() <- GFP_KERNEL
2) __vxge_hw_mempool_grow() <- vzalloc()
__vxge_hw_blockpool_malloc()
vxge_os_dma_malloc_async():
1 __vxge_hw_mempool_grow() <- vzalloc()
__vxge_hw_blockpool_malloc()
__vxge_hw_blockpool_blocks_add()
2) vxge_hw_vpath_open() <- vzalloc()
__vxge_hw_blockpool_block_allocate()
That means neither of these functions needs a conditional allocation mode.
Remove the in_interrupt() conditional and use GFP_KERNEL.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
lance_interrupt() contains two pointless checks:
- A check whether the 'dev_id' argument is NULL. 'dev_id' is the pointer
which was handed in to request_irq() and the interrupt handler will
always be invoked with that pointer as 'dev_id' argument by the core
code.
- A check for interrupt reentrancy. The core code already guarantees
non-reentrancy of interrupt handlers.
Remove these check.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
bigmac_init_rings() has an argument signaling if it is called from the
interrupt handler. This is used to decide between GFP_KERNEL and GFP_ATOMIC
for memory allocations.
But it also checks in_interrupt() to handle invocations which come from the
timer callback bigmac_timer() via bigmac_hw_init(), which is invoked with
'in_irq = 0'. While the timer callback is clearly not in hard interrupt
context it is still not sleepable context.
Rename the argument to `non_blocking' and set it to true if invoked from
the timer callback or the interrupt handler which allows to remove the
in_interrupt() check and makes the code consistent.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
efx_ef10_try_update_nic_stats_vf() is now only invoked from thread context
and can sleep after efx::stats_lock is dropped.
Change the allocation mode from GFP_ATOMIC to GFP_KERNEL.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
efx_ef10_try_update_nic_stats_vf() used in_interrupt() to figure out
whether it is safe to sleep (for MCDI) or not.
The only caller from which it was not is efx_net_stats(), which can be
invoked under dev_base_lock from net-sysfs::netstat_show().
So add a new update_stats_atomic() method to struct efx_nic_type, and call
it from efx_net_stats(), removing the need for
efx_ef10_try_update_nic_stats_vf() to behave differently for this case
(which it wasn't doing correctly anyway).
For all nic_types other than EF10 VF, this method is NULL so the the
regular update_stats() methods are invoked , which are happy with being
called from atomic contexts.
Fixes: f00bf2305c ("sfc: don't update stats on VF when called in atomic context")
Reported-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Martin Habets <mhabets@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The usage of in_interrupt() in drivers is phased out and Linus clearly
requested that code which changes behaviour depending on context should
either be seperated or the context be conveyed in an argument passed by the
caller, which usually knows the context.
sonic_quiesce() uses 'in_interrupt() || irqs_disabled()' to chose either
udelay() or usleep_range() in the wait loop.
In all callchains leading to it the context is well defined and known.
Add a 'may_sleep' argument and pass it through the various callchains
leading to this function.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
in_interrupt() is ill defined and does not provide what the name
suggests. The usage especially in driver code is deprecated and a tree wide
effort to clean up and consolidate the (ab)usage of in_interrupt() and
related checks is happening.
In this case the check covers only parts of the contexts in which these
functions cannot be called. It fails to detect preemption or interrupt
disabled invocations.
As the functions which contain these warnings invoke mutex_lock() which
contains a broad variety of checks (always enabled or debug option
dependent) and therefore covers all invalid conditions already, there is no
point in having inconsistent warnings in those drivers. The conditional
return is not really valuable in practice either.
Just remove them.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
in_interrupt() is ill defined and does not provide what the name
suggests. The usage especially in driver code is deprecated and a tree wide
effort to clean up and consolidate the (ab)usage of in_interrupt() and
related checks is happening.
In this case the check covers only parts of the contexts in which these
functions cannot be called. It fails to detect preemption or interrupt
disabled invocations.
As the functions which are invoked from ionic_adminq_post() and
ionic_dev_cmd_wait() contain a broad variety of checks (always enabled or
debug option dependent) which cover all invalid conditions already, there
is no point in having inconsistent warnings in those drivers.
Just remove them.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
The in_interrupt() usage in this driver tries to figure out which context
may sleep and which context may not sleep. in_interrupt() is not really
suitable as it misses both preemption disabled and interrupt disabled
invocations from task context.
Conditionals like that in driver code are frowned upon in general because
invocations of functions from invalid contexts might not be detected
as the conditional papers over it.
ionic_lif_addr() and _ionoc_lif_rx_mode() can be called from:
1) ->ndo_set_rx_mode() which is under netif_addr_lock_bh()) so it must not
sleep.
2) Init and setup functions which are in fully preemptible task context.
ionic_link_status_check_request() has two call paths:
1) NAPI which obviously cannot sleep
2) Setup which is again fully preemptible task context
Add arguments which convey the execution context to the affected functions
and let the callers provide the context instead of letting the functions
deduce it.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
in_interrupt() is ill defined and does not provide what the name
suggests. The usage especially in driver code is deprecated and a tree wide
effort to clean up and consolidate the (ab)usage of in_interrupt() and
related checks is happening.
In this case the checks cover only parts of the contexts in which these
functions cannot be called. They fail to detect preemption or interrupt
disabled invocations.
As the functions which are invoked from the various places contain already
a broad variety of checks (always enabled or debug option dependent) cover
all invalid conditions already, there is no point in having inconsistent
warnings in those drivers.
Just remove them.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The usage of in_interrupt() in drivers is phased out and Linus clearly
requested that code which changes behaviour depending on context should
either be seperated or the context be conveyed in an argument passed by the
caller, which usually knows the context.
mpc52xx_fec_stop() uses in_interrupt() to check if it is safe to sleep. All
callers run in well defined contexts.
Pass an argument from the callers indicating whether it is safe to sleep.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
e100_hw_init() invokes e100_self_test() only if in_interrupt() returns
false as e100_self_test() uses msleep() which requires sleepable task
context. The in_interrupt() check is incomplete because in_interrupt()
cannot catch callers from contexts which have just preemption or interrupts
disabled.
e100_hw_init() is invoked from:
- e100_loopback_test() which clearly is sleepable task context as the
function uses msleep() itself.
- e100_up() which clearly is sleepable task context as well because it
invokes e100_alloc_cbs() abd request_irq() which both require sleepable
task context due to GFP_KERNEL allocations and mutex_lock() operations.
Remove the pointless in_interrupt() check.
As a side effect of this analysis it turned out that e100_rx_alloc_list()
which is only invoked from e100_loopback_test() and e100_up() pointlessly
uses a GFP_ATOMIC allocation. The next invoked function e100_alloc_cbs() is
using GFP_KERNEL already.
Change the allocation mode in e100_rx_alloc_list() to GFP_KERNEL as well.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
t4_sge_stop() is only ever called from task context and the in_interrupt()
check is presumably a leftover from copying t3_sge_stop().
Aside of in_interrupt() being deprecated because it's not providing what it
claims to provide, this check would paper over illegitimate callers.
The functions invoked from t4_sge_stop() contain already warnings to catch
invocations from invalid contexts.
Remove it.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
t3_sge_stop() is called from task context and from error handlers in
interrupt context. It relies on in_interrupt() to differentiate the
contexts.
in_interrupt() is deprecated as it is ill defined and does not provide what
it suggests.
Instead of replacing it with some other construct, simply split the
function into t3_sge_stop_dma(), which can be called from any context, and
t3_sge_stop() which can be only called from task context.
This has the advantage that any bogus invocation of t3_sge_stop() from
wrong contexts can be caught by debug kernels instead of being papered over
by the conditional.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
in_interrupt() is ill defined and does not provide what the name
suggests. The usage especially in driver code is deprecated and a tree wide
effort to clean up and consolidate the (ab)usage of in_interrupt() and
related checks is happening.
In this case the check covers only parts of the contexts in which these
functions cannot be called. It fails to detect preemption or interrupt
disabled invocations.
As the functions which are invoked from at*_reinit_locked() contain a broad
variety of checks (always enabled or debug option dependent) which cover
all invalid conditions already, there is no point in having inconsistent
warnings in those drivers.
Just remove them.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
The usage of in_interrupt() in non-core code is phased out. Ideally the
information of the calling context should be passed by the callers or the
functions be split as appropriate.
cfhsi_rx_desc() and cfhsi_rx_pld() use in_interrupt() to distinguish if
they should use netif_rx() or netif_rx_ni() for receiving packets.
The attempt to consolidate the code by passing an arguemnt or by
distangling it failed due lack of knowledge about this driver and because
the call chains are hard to follow.
As a stop gap use netif_rx_any_context() which invokes the correct code path
depending on context and confines the in_interrupt() usage to core code.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Quite some drivers make conditional decisions based on in_interrupt() to
invoke either netif_rx() or netif_rx_ni().
Conditionals based on in_interrupt() or other variants of preempt count
checks in drivers should not exist for various reasons and Linus clearly
requested to either split the code pathes or pass an argument to the
common functions which provides the context.
This is obviously the correct solution, but for some of the affected
drivers this needs a major rewrite due to their convoluted structure.
As in_interrupt() usage in drivers needs to be phased out, provide
netif_rx_any_context() as a stop gap for these drivers.
This confines the in_interrupt() conditional to core code which in turn
allows to remove the access to this check for driver code and provides one
central place to do further modifications once the driver maze is cleaned
up.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
While chasing in_interrupt() (ab)use in drivers it turned out that the
caif_spi driver has never been in use since the driver was merged 10 years
ago. There never was any matching code which provides a platform device.
The driver has not seen any update (asided of treewide changes and
cleanups) since 8 years and the maintainers vanished from the planet.
So analysing the potential contexts and the (in)correctness of
in_interrupt() usage is just a pointless exercise.
Remove the cruft.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
enic_dev_wait() has a BUG_ON(in_interrupt()).
Chasing the callers of enic_dev_wait() revealed the gems of enic_reset()
and enic_tx_hang_reset() which are both invoked through work queues in
order to be able to call rtnl_lock(). So far so good.
After locking rtnl both functions acquire enic::enic_api_lock which
serializes against the (ab)use from infiniband. This is where the
trainwreck starts.
enic::enic_api_lock is a spin_lock() which implicitly disables preemption,
but both functions invoke a ton of functions under that lock which can
sleep. The BUG_ON(in_interrupt()) does not trigger in that case because it
can't detect the preempt disabled condition.
This clearly has never been tested with any of the mandatory debug options
for 7+ years, which would have caught that for sure.
Cure it by adding a enic_api_busy member to struct enic, which is modified
and evaluated with enic::enic_api_lock held.
If enic_api_devcmd_proxy_by_index() observes enic::enic_api_busy as true,
it drops enic::enic_api_lock and busy waits for enic::enic_api_busy to
become false.
It would be smarter to wait for a completion of that busy period, but
enic_api_devcmd_proxy_by_index() is called with other spin locks held which
obviously can't sleep.
Remove the BUG_ON(in_interrupt()) check as well because it's incomplete and
with proper debugging enabled the problem would have been caught from the
debug checks in schedule_timeout().
Fixes: 0b038566c0 ("drivers/net: enic: Add an interface for USNIC to interact with firmware")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 5d5b4128c4 ("devlink: introduce flash update overwrite mask")
added a usage of _BITUL to the UAPI <linux/devlink.h> header, but failed
to include the header file where it was defined. It happens that this
does not break any existing kernel include chains because it gets
included through other sources. However, when including the UAPI headers
in a userspace application (such as devlink in iproute2), _BITUL is not
defined.
Fixes: 5d5b4128c4 ("devlink: introduce flash update overwrite mask")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rohit Maheshwari says:
====================
cxgb4/ch_ktls: updates in net-next
This series of patches improves connections setup and statistics.
This series is broken down as follows:
Patch 1 fixes the handling of connection setup failure in HW. Driver
shouldn't return success to tls_dev_add, until HW returns success.
Patch 2 avoids the log flood.
Patch 3 adds ktls statistics at port level.
v1->v2:
- removed conn_up from all places.
v2->v3:
- Corrected timeout handling.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
All the ktls stats were at adapter level, but now changing it
to port level.
Fixes: 62370a4f34 ("cxgb4/chcr: Add ipv6 support and statistics")
Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Changing these logs to dynamic debugs. If issue is seen, these
logs can be enabled at run time.
Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since driver first return success to tls_dev_add, if req to HW is
successful, but later if HW returns failure, that connection traffic
fails permanently and connection status remains unknown to stack.
v1->v2:
- removed conn_up from all places.
v2->v3:
- Corrected timeout handling.
Fixes: 34aba2c450 ("cxgb4/chcr : Register to tls add and del callback")
Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When an L2TPv3 session receives a data frame with an incorrect cookie
l2tp_core logs a warning message and bumps a stats counter to reflect
the fact that the packet has been dropped.
However, the stats counter in question is missing from the l2tp_netlink
get message for tunnel and session instances.
Include the statistic in the netlink get response.
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Johan Hedberg says:
====================
pull request: bluetooth-next 2020-09-29
Here's the main bluetooth-next pull request for 5.10:
- Multiple fixes to suspend/resume handling
- Added mgmt events for controller suspend/resume state
- Improved extended advertising support
- btintel: Enhanced support for next generation controllers
- Added Qualcomm Bluetooth SoC WCN6855 support
- Several other smaller fixes & improvements
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Huazhong Tan says:
====================
net: hns3: updates for -next
There are some misc updates for the HNS3 ethernet driver.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Adds debugfs to dump tqp enable status.
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In order to query specifications of the device, add a new debugfs
command "dev spec" to do that.
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
NETIF_F_HW_VLAN_CTAG_FILTER is not set in netdev->hw_feature,
but set in netdev->features.
So the handler of NETIF_F_HW_VLAN_CTAG_FILTER in hns3_self_test() is
always true, remove it.
Signed-off-by: Guojia Liao <liaoguojia@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add RoCE VF client reset support by notifying the RoCE VF client
when hns3 VF is resetting and adding a interface to query whether
CMDQ is ready to work.
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for UDP segmentation offload to the HNS3 driver
when the device can do it.
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since the maximun BD number may not be 8 now, so rename
hns3_over_8bd() to hns3_over_max_bd().
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, the driver is able to query the device's specifications,
which includes the maximum BD number of non TSO packet, so replace
macro HNS3_MAX_NON_TSO_BD_NUM with the queried value, and rewrite
macro HNS3_MAX_NON_TSO_SIZE whose value depends on the the maximum
BD number of non TSO packet.
Also, add a new parameter max_non_tso_bd_num to function
hns3_tx_bd_num() and hns3_skb_need_linearized(), then they can get
the maximum BD number of non TSO packet from the caller instead of
calculating by themself, The note of hns3_skb_need_linearized()
should be update as well.
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stanislaw Kardach says:
====================
octeontx2-af: cleanup and extend parser config
Current KPU configuration data is spread over multiple files which makes
it hard to read. Clean this up by gathering all configuration data in a
single structure and also in a single file (npc_profile.h). This should
increase the readability of KPU handling code (since it always
references same structure), simplify updates to the CAM key extraction
code and allow abstracting out the configuration source.
Additionally extend and fix the parser config to support additional DSA
types, NAT-T-ESP and IPv6 fields.
Patch 1 ensures that CUSTOMx LTYPEs are not aliased with meaningful
LTYPEs where possible.
Patch 2 gathers all KPU profile related data into a single struct and
creates an adapter structure which provides an interface to the KPU
profile for the octeontx2-af driver.
Patches 3-4 add support for Extended DSA, eDSA and Forward DSA.
Patches 5-6 adds IPv6 fields to CAM key extraction and optimize the
parser performance for fragmented IPv6 packets.
Patch 7 refactors ESP handling in the parser to support NAT-T-ESP.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for NAT-T-ESP to KPU parser configuration. NAT ESP is a UDP
based protocol. So move ESP to LE so that both UDP and ESP can be
extracted.
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Acked-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
IPv6 fragmented packet may not contain completed layer 4 information.
So stop KPU parsing after setting ipv6 fragmentation flag.
Signed-off-by: Abhijit Ayarekar <aayarekar@marvell.com>
Acked-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Added some IPv6 protocol fields to the default MKEX profile.
They include everything from the beginning of IP header and up to
source address. The pattern occupies full KW2 in MCAM entry.
Only one out of two LD registers for this protocol is used.
Signed-off-by: Vidhya Vidhyaraman <vraman@marvell.com>
Acked-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
KPU profile interpret Extended DSA and eDSA by looking source dev. This
was incorrect and it restricts to use few source device ids and also
created confusion while parsing regular DSA tag. With below patch lookup
was based on bit 12 of Word0. This is always zero for DSA tag and it
should be one for Extended DSA and eDSA.
Signed-off-by: Satha Rao <skoteshwar@marvell.com>
Acked-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Marvell Prestera switches supports distributed switch architecture
by inserting Forward DSA tag of 4 bytes right after ethernet SMAC.
This tag don't have a tpid field.
This patch provides parser and extraction support for the same.
Default ldata extraction profile added for FDSA such that Src_port
is extracted and placed inplace of vlanid field. Like extended DSA
and eDSA tags,a special PKIND of 62 is used for this tag.
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Acked-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Refactor KPU related NPC code gathering all configuration data in a
structured format and putting it in one place (npc_profile.h).
This increases readability and makes it easier to extend the profile
configuration (as opposed to jumping between multiple header and source
files).
To do this:
* Gather all KPU profile related data into a single adapter struct.
* Convert the built-in MKEX definition to a structured one to streamline
the MKEX loading.
* Convert LT default register configuration into a structure, keeping
default protocol settings in same file where identifiers for those
protocols are defined.
* Add a single point for KPU profile loading, so that its source may
change in the future once proper interfaces for loading such config
are in place.
Signed-off-by: Stanislaw Kardach <skardach@marvell.com>
Acked-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since LD contains LTYPE definitions tweaked toward efficient
NIX_AF_RX_FLOW_KEY_ALG(0..31)_FIELD(0..4) usage, the original location
of NPC_LT_LD_CUSTOM0/1 was aliased with MPLS_IN_* definitions.
Moving custom frame to value 6 and 7 removes the aliasing at the cost of
custom frames being also considered when TCP/UDP RSS algo is configured.
However since the goal of CUSTOM frames is to classify them to a
separate set of RQs, this cost is acceptable.
Signed-off-by: Stanislaw Kardach <skardach@marvell.com>
Acked-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There is a regular need in the kernel to provide a way to declare having
a dynamically sized set of trailing elements in a structure. Kernel code
should always use “flexible array members”[1] for these cases. The older
style of one-element or zero-length arrays should no longer be used[2].
Refactor the code according to the use of a flexible-array member in
struct tc_u_hnode and use the struct_size() helper to calculate the
size for the allocations. Commit 5778d39d07 ("net_sched: fix struct
tc_u_hnode layout in u32") makes it clear that the code is expected to
dynamically allocate divisor + 1 entries for ->ht[] in tc_uhnode. Also,
based on other observations, as the piece of code below:
1232 for (h = 0; h <= ht->divisor; h++) {
1233 for (n = rtnl_dereference(ht->ht[h]);
1234 n;
1235 n = rtnl_dereference(n->next)) {
1236 if (tc_skip_hw(n->flags))
1237 continue;
1238
1239 err = u32_reoffload_knode(tp, n, add, cb,
1240 cb_priv, extack);
1241 if (err)
1242 return err;
1243 }
1244 }
we can assume that, in general, the code is actually expecting to allocate
that extra space for the one-element array in tc_uhnode, everytime it
allocates memory for instances of tc_uhnode or tc_u_common structures.
That's the reason for passing '1' as the last argument for struct_size()
in the allocation for _root_ht_ and _tp_c_, and 'divisor + 1' in the
allocation code for _ht_.
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://www.kernel.org/doc/html/v5.9-rc1/process/deprecated.html#zero-length-and-one-element-arrays
Tested-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/lkml/5f7062af.z3T9tn9yIPv6h5Ny%25lkp@intel.com/
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
There is a regular need in the kernel to provide a way to declare having
a dynamically sized set of trailing elements in a structure. Kernel code
should always use “flexible array members”[1] for these cases. The older
style of one-element or zero-length arrays should no longer be used[2].
Refactor the code according to the use of a flexible-array member in
struct qed_ll2_tx_packet, instead of a one-element array and use the
struct_size() helper to calculate the size for the allocations. Commit
f5823fe689 ("qed: Add ll2 option to limit the number of bds per packet")
was used as a reference point for these changes.
Also, it's important to notice that flexible-array members should occur
last in any structure, and structures containing such arrays and that
are members of other structures, must also occur last in the containing
structure. That's why _cur_completing_packet_ is now moved to the bottom
in struct qed_ll2_tx_queue. _descq_mem_ and _cur_send_packet_ are also
moved for unification.
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://www.kernel.org/doc/html/v5.9-rc1/process/deprecated.html#zero-length-and-one-element-arrays
Tested-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/lkml/5f707198.PA1UCZ8MYozYZYAR%25lkp@intel.com/
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Adding reference clock (1us tic) for all LPI timer on Intel platforms.
The reference clock is derived from ptp clk. This also enables all LPI
counter.
Signed-off-by: Rusaimi Amira Ruslan <rusaimi.amira.rusaimi@intel.com>
Signed-off-by: Voon Weifeng <weifeng.voon@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
