The following BUG was reported by kasan:
BUG: KASAN: use-after-free in ipoib_cm_tx_start+0x430/0x1390 [ib_ipoib]
Read of size 80 at addr ffff88034c30bcd0 by task kworker/u16:1/24020
Workqueue: ipoib_wq ipoib_cm_tx_start [ib_ipoib]
Call Trace:
dump_stack+0x9a/0xeb
print_address_description+0xe3/0x2e0
kasan_report+0x18a/0x2e0
? ipoib_cm_tx_start+0x430/0x1390 [ib_ipoib]
memcpy+0x1f/0x50
ipoib_cm_tx_start+0x430/0x1390 [ib_ipoib]
? kvm_clock_read+0x1f/0x30
? ipoib_cm_skb_reap+0x610/0x610 [ib_ipoib]
? __lock_is_held+0xc2/0x170
? process_one_work+0x880/0x1960
? process_one_work+0x912/0x1960
process_one_work+0x912/0x1960
? wq_pool_ids_show+0x310/0x310
? lock_acquire+0x145/0x440
worker_thread+0x87/0xbb0
? process_one_work+0x1960/0x1960
kthread+0x314/0x3d0
? kthread_create_worker_on_cpu+0xc0/0xc0
ret_from_fork+0x3a/0x50
Allocated by task 0:
kasan_kmalloc+0xa0/0xd0
kmem_cache_alloc_trace+0x168/0x3e0
path_rec_create+0xa2/0x1f0 [ib_ipoib]
ipoib_start_xmit+0xa98/0x19e0 [ib_ipoib]
dev_hard_start_xmit+0x159/0x8d0
sch_direct_xmit+0x226/0xb40
__dev_queue_xmit+0x1d63/0x2950
neigh_update+0x889/0x1770
arp_process+0xc47/0x21f0
arp_rcv+0x462/0x760
__netif_receive_skb_core+0x1546/0x2da0
netif_receive_skb_internal+0xf2/0x590
napi_gro_receive+0x28e/0x390
ipoib_ib_handle_rx_wc_rss+0x873/0x1b60 [ib_ipoib]
ipoib_rx_poll_rss+0x17d/0x320 [ib_ipoib]
net_rx_action+0x427/0xe30
__do_softirq+0x28e/0xc42
Freed by task 26680:
__kasan_slab_free+0x11d/0x160
kfree+0xf5/0x360
ipoib_flush_paths+0x532/0x9d0 [ib_ipoib]
ipoib_set_mode_rss+0x1ad/0x560 [ib_ipoib]
set_mode+0xc8/0x150 [ib_ipoib]
kernfs_fop_write+0x279/0x440
__vfs_write+0xd8/0x5c0
vfs_write+0x15e/0x470
ksys_write+0xb8/0x180
do_syscall_64+0x9b/0x420
entry_SYSCALL_64_after_hwframe+0x49/0xbe
The buggy address belongs to the object at ffff88034c30bcc8
which belongs to the cache kmalloc-512 of size 512
The buggy address is located 8 bytes inside of
512-byte region [ffff88034c30bcc8, ffff88034c30bec8)
The buggy address belongs to the page:
The following race between change mode and xmit flow is the reason for
this use-after-free:
Change mode Send packet 1 to GID XX Send packet 2 to GID XX
| | |
start | |
| | |
| | |
| Create new path for GID XX |
| and update neigh path |
| | |
| | |
| | |
flush_paths | |
| |
queue_work(cm.start_task) |
| Path for GID XX not found
| create new path
|
|
start_task runs with old
released path
There is no locking to protect the lifetime of the path through the
ipoib_cm_tx struct, so delete it entirely and always use the newly looked
up path under the priv->lock.
Fixes: 546481c281 ("IB/ipoib: Fix memory corruption in ipoib cm mode connect flow")
Signed-off-by: Feras Daoud <ferasda@mellanox.com>
Reviewed-by: Erez Shitrit <erezsh@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The intention of the flow_is_supported was to disable the entire tree and
methods that allow raw flow creation, but the grammar syntax has this
disable the entire UVERBS_FLOW object. Since the method requires a
MLX5_IB_OBJECT_FLOW_MATCHER there is no need to do anything, as it is
automatically disabled when matchers are disabled.
This restores the ability to create flow steering rules on representors
via regular verbs.
Fixes: a1462351b5 ("RDMA/mlx5: Fail early if user tries to create flows on IB representors")
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The async_file might be freed before the disassociation has been ended,
causing qp shutdown to use after free on it.
Since uverbs_destroy_ufile_hw is not a fence, it returns if a
disassociation is ongoing in another thread. It has to be written this way
to avoid deadlock. However this means that the ufile FD close cannot
destroy anything that may still be used by an active kref, such as the the
async_file.
To fix that move the kref_put() to be in ib_uverbs_release_file().
BUG: unable to handle kernel paging request at ffffffffba682787
PGD bc80e067 P4D bc80e067 PUD bc80f063 PMD 1313df163 PTE 80000000bc682061
Oops: 0003 [#1] SMP PTI
CPU: 1 PID: 32410 Comm: bash Tainted: G OE 4.20.0-rc6+ #3
Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
RIP: 0010:__pv_queued_spin_lock_slowpath+0x1b3/0x2a0
Code: 98 83 e2 60 49 89 df 48 8b 04 c5 80 18 72 ba 48 8d
ba 80 32 02 00 ba 00 80 00 00 4c 8d 65 14 41 bd 01 00 00 00 48 01 c7 85
d2 <48> 89 2f 48 89 fb 74 14 8b 45 08 85 c0 75 42 84 d2 74 6b f3 90 83
RSP: 0018:ffffc1bbc064fb58 EFLAGS: 00010006
RAX: ffffffffba65f4e7 RBX: ffff9f209c656c00 RCX: 0000000000000001
RDX: 0000000000008000 RSI: 0000000000000000 RDI: ffffffffba682787
RBP: ffff9f217bb23280 R08: 0000000000000001 R09: 0000000000000000
R10: ffff9f209d2c7800 R11: ffffffffffffffe8 R12: ffff9f217bb23294
R13: 0000000000000001 R14: 0000000000000000 R15: ffff9f209c656c00
FS: 00007fac55aad740(0000) GS:ffff9f217bb00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffffffba682787 CR3: 000000012f8e0000 CR4: 00000000000006e0
Call Trace:
_raw_spin_lock_irq+0x27/0x30
ib_uverbs_release_uevent+0x1e/0xa0 [ib_uverbs]
uverbs_free_qp+0x7e/0x90 [ib_uverbs]
destroy_hw_idr_uobject+0x1c/0x50 [ib_uverbs]
uverbs_destroy_uobject+0x2e/0x180 [ib_uverbs]
__uverbs_cleanup_ufile+0x73/0x90 [ib_uverbs]
uverbs_destroy_ufile_hw+0x5d/0x120 [ib_uverbs]
ib_uverbs_remove_one+0xea/0x240 [ib_uverbs]
ib_unregister_device+0xfb/0x200 [ib_core]
mlx5_ib_remove+0x51/0xe0 [mlx5_ib]
mlx5_remove_device+0xc1/0xd0 [mlx5_core]
mlx5_unregister_device+0x3d/0xb0 [mlx5_core]
remove_one+0x2a/0x90 [mlx5_core]
pci_device_remove+0x3b/0xc0
device_release_driver_internal+0x16d/0x240
unbind_store+0xb2/0x100
kernfs_fop_write+0x102/0x180
__vfs_write+0x36/0x1a0
? __alloc_fd+0xa9/0x170
? set_close_on_exec+0x49/0x70
vfs_write+0xad/0x1a0
ksys_write+0x52/0xc0
do_syscall_64+0x5b/0x180
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7fac551aac60
Cc: <stable@vger.kernel.org> # 4.2
Fixes: 036b106357 ("IB/uverbs: Enable device removal when there are active user space applications")
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The hns_roce_ib_create_srq_resp is used to interact with the user for
data, this was open coded to use a u32 directly, instead use a properly
sized structure.
Fixes: c7bcb13442 ("RDMA/hns: Add SRQ support for hip08 kernel mode")
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Work must hold a kref on the ib_device otherwise the dev pointer can
become free before the work runs. This can happen because the work is
being pushed onto the system work queue which is not flushed during driver
unregister.
Remove the bogus use of 'reg_state':
- While in uverbs the reg_state is guaranteed to always be
REGISTERED
- Testing reg_state with no locking is bogus. Use ib_device_try_get()
to get back into a region that prevents unregistration.
For now continue with a flow that is similar to the existing code.
Fixes: 813e90b1ae ("IB/mlx5: Add advise_mr() support")
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Reviewed-by: Moni Shoua <monis@mellanox.com>
It turns out future patches need this capability quite widely now, not
just for netlink, so provide two global functions to manage the
registration lock refcount.
This also moves the point the lock becomes 1 to within
ib_register_device() so that the semantics of the public API are very sane
and clear. Calling ib_device_try_get() will fail on devices that are only
allocated but not yet registered.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Fix potential memory corruption and panic in loopback for IB_WR_SEND
variants.
The code blindly assumes the posted length will fit in the fetched rwqe,
which is not a valid assumption.
Fix by adding a limit test, and triggering the appropriate send completion
and putting the QP in an error state. This mimics the handling for
non-loopback QPs.
Fixes: 1570346153 ("IB/{hfi1, qib, rdmavt}: Move ruc_loopback to rdmavt")
Cc: <stable@vger.kernel.org> #v4.20+
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Applications that use the stack for execution purposes cause userspace PSM
jobs to fail during mmap().
Both Fortran (non-standard format parsing) and C (callback functions
located in the stack) applications can be written such that stack
execution is required. The linker notes this via the gnu_stack ELF flag.
This causes READ_IMPLIES_EXEC to be set which forces all PROT_READ mmaps
to have PROT_EXEC for the process.
Checking for VM_EXEC bit and failing the request with EPERM is overly
conservative and will break any PSM application using executable stacks.
Cc: <stable@vger.kernel.org> #v4.14+
Fixes: 1222026764 ("IB/hfi: Protect against writable mmap")
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The work completion length for a receiving a UD send with immediate is
short by 4 bytes causing application using this opcode to fail.
The UD receive logic incorrectly subtracts 4 bytes for immediate
value. These bytes are already included in header length and are used to
calculate header/payload split, so the result is these 4 bytes are
subtracted twice, once when the header length subtracted from the overall
length and once again in the UD opcode specific path.
Remove the extra subtraction when handling the opcode.
Fixes: 7724105686 ("IB/hfi1: add driver files")
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Brian Welty <brian.welty@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When the flags verification was added two flags were missed from the
check:
* MLX5_QP_FLAG_TIR_ALLOW_SELF_LB_UC
* MLX5_QP_FLAG_TIR_ALLOW_SELF_LB_MC
This causes user applications that were using these flags to break.
Fixes: 2e43bb31b8 ("IB/mlx5: Verify that driver supports user flags")
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Not much so far, but I'm feeling like the 2nd PR -rc will be larger than
this. We have the usual batch of bugs and two fixes to code merged this cycle.
- Restore valgrind support for the ioctl verbs interface merged this window,
and fix a missed error code on an error path from that conversion
- A user reported crash on obsolete mthca hardware
- pvrdma was using the wrong command opcode toward the hypervisor
- NULL pointer crash regression when dumping rdma-cm over netlink
- Be conservative about exposing the global rkey
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEfB7FMLh+8QxL+6i3OG33FX4gmxoFAlxBTeMACgkQOG33FX4g
mxrOIQ//YdZdU9J825DM4ppH/MWRoPgayI+cca5sW2EG/nkgsvFJoiVDDK5/ka1g
ge5Q21ZLMSPCBR0Iu/e/JOq6fJI4fsbcJGZURbyKgRZqyCBCf6qJbhiZKifpQMVb
w7RP8kRFRdaiQzkAYfZSv9TP93JLvTDLg6zZ74r4vc8YphIzkI410v568hs6FiVu
MIcb53pBWUswpCAnBVB+54sw+phJyjd02kmY4xTlWmiEzwHBb0JQ+Kps72/G0IWy
0vOlDI1UjwqoDfThzyT7mcXqnSbXxg/e8EecMpyFzlorQyxgZ5TsJgQ8ubSYxuiQ
7+dZ4rsdoZD++3MGtpmqDMQzKSPb989WzJT8WLp5oSw4ryAXeJJ+tys/APLtvPkf
EgKgVyEqfxMDXn02/ENwDPpZyKLZkhcHFLgvfYmxtlDvtai/rvTLmzV1mptEaxlF
+2pwSQM4/E/8qrLglN9kdFSfjBMb7Bvd2NYQqZ9vah2omb7gPsaTEEpVw6l/E0NX
oOxFKPEzb0nP9KmJmwO8KLCvcrruuRL8kpmhc6sQMQJ6z0h4hmZrHF5EZZH92g0p
maHyrx66vqw/Yl+TLvAb/T6FV1ax5c1TauiNErAjnag2wgVWW42Q7lQzSFLFI8su
GU8oRlbIclDQ/1bszsf0IShq0r9G17+2n6yyTX39rj62YioiDlI=
=ymZq
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma fixes frfom Jason Gunthorpe:
"Not much so far. We have the usual batch of bugs and two fixes to code
merged this cycle:
- Restore valgrind support for the ioctl verbs interface merged this
window, and fix a missed error code on an error path from that
conversion
- A user reported crash on obsolete mthca hardware
- pvrdma was using the wrong command opcode toward the hypervisor
- NULL pointer crash regression when dumping rdma-cm over netlink
- Be conservative about exposing the global rkey"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/uverbs: Mark ioctl responses with UVERBS_ATTR_F_VALID_OUTPUT
RDMA/mthca: Clear QP objects during their allocation
RDMA/vmw_pvrdma: Return the correct opcode when creating WR
RDMA/cma: Add cm_id restrack resource based on kernel or user cm_id type
RDMA/nldev: Don't expose unsafe global rkey to regular user
RDMA/uverbs: Fix post send success return value in case of error
When the ioctl interface for the write commands was introduced it did
not mark the core response with UVERBS_ATTR_F_VALID_OUTPUT. This causes
rdma-core in userspace to not mark the buffers as written for valgrind.
Along the same lines it turns out we have always missed marking the driver
data. Fixing both of these makes valgrind work properly with rdma-core and
ioctl.
Fixes: 4785860e04 ("RDMA/uverbs: Implement an ioctl that can call write and write_ex handlers")
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Since the IB_WR_REG_MR opcode value changed, let's set the PVRDMA device
opcodes explicitly.
Reported-by: Ruishuang Wang <ruishuangw@vmware.com>
Fixes: 9a59739bd0 ("IB/rxe: Revise the ib_wr_opcode enum")
Cc: stable@vger.kernel.org
Reviewed-by: Bryan Tan <bryantan@vmware.com>
Reviewed-by: Ruishuang Wang <ruishuangw@vmware.com>
Reviewed-by: Vishnu Dasa <vdasa@vmware.com>
Signed-off-by: Adit Ranadive <aditr@vmware.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
A recent regression causes a null ptr crash when dumping cm_id resources.
The cma is incorrectly adding all cm_id restrack resources as kernel mode.
Fixes: af8d70375d ("RDMA/restrack: Resource-tracker should not use uobject pointers")
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
We already need to zero out memory for dma_alloc_coherent(), as such
using dma_zalloc_coherent() is superflous. Phase it out.
This change was generated with the following Coccinelle SmPL patch:
@ replace_dma_zalloc_coherent @
expression dev, size, data, handle, flags;
@@
-dma_zalloc_coherent(dev, size, handle, flags)
+dma_alloc_coherent(dev, size, handle, flags)
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
[hch: re-ran the script on the latest tree]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Unsafe global rkey is considered dangerous because it exposes memory
registered for all memory in the system. Only users with a QP on the same
PD can use the rkey, and generally those QPs will already know the
value. However, out of caution, do not expose the value to unprivleged
users on the local system. Require CAP_NET_ADMIN instead.
Cc: <stable@vger.kernel.org> # 4.16
Fixes: 29cf1351d4 ("RDMA/nldev: provide detailed PD information")
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
If get QP object fails 'ret' must be assigned with a proper error code.
Fixes: 9a0738575f ("RDMA/uverbs: Use uverbs_response() for remaining response copying")
Signed-off-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Over the break a few defects were found, so this is a -rc style pull
request of various small things that have been posted.
- An attempt to shorten RCU grace period driven delays showed crashes
during heavier testing, and has been entirely reverted
- A missed merge/rebase error between the advise_mr and ib_device_ops
series
- Some small static analysis driven fixes from Julia and Aditya
- Missed ability to create a XRC_INI in the devx verbs interop series
-----BEGIN PGP SIGNATURE-----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=REsM
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma fixes from Jason Gunthorpe:
"Over the break a few defects were found, so this is a -rc style pull
request of various small things that have been posted.
- An attempt to shorten RCU grace period driven delays showed crashes
during heavier testing, and has been entirely reverted
- A missed merge/rebase error between the advise_mr and ib_device_ops
series
- Some small static analysis driven fixes from Julia and Aditya
- Missed ability to create a XRC_INI in the devx verbs interop
series"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
infiniband/qedr: Potential null ptr dereference of qp
infiniband: bnxt_re: qplib: Check the return value of send_message
IB/ipoib: drop useless LIST_HEAD
IB/core: Add advise_mr to the list of known ops
Revert "IB/mlx5: Fix long EEH recover time with NVMe offloads"
IB/mlx5: Allow XRC INI usage via verbs in DEVX context
Nobody has actually used the type (VERIFY_READ vs VERIFY_WRITE) argument
of the user address range verification function since we got rid of the
old racy i386-only code to walk page tables by hand.
It existed because the original 80386 would not honor the write protect
bit when in kernel mode, so you had to do COW by hand before doing any
user access. But we haven't supported that in a long time, and these
days the 'type' argument is a purely historical artifact.
A discussion about extending 'user_access_begin()' to do the range
checking resulted this patch, because there is no way we're going to
move the old VERIFY_xyz interface to that model. And it's best done at
the end of the merge window when I've done most of my merges, so let's
just get this done once and for all.
This patch was mostly done with a sed-script, with manual fix-ups for
the cases that weren't of the trivial 'access_ok(VERIFY_xyz' form.
There were a couple of notable cases:
- csky still had the old "verify_area()" name as an alias.
- the iter_iov code had magical hardcoded knowledge of the actual
values of VERIFY_{READ,WRITE} (not that they mattered, since nothing
really used it)
- microblaze used the type argument for a debug printout
but other than those oddities this should be a total no-op patch.
I tried to fix up all architectures, did fairly extensive grepping for
access_ok() uses, and the changes are trivial, but I may have missed
something. Any missed conversion should be trivially fixable, though.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
idr_find() may fail and return a NULL pointer. The fix checks the return
value of the function and returns an error in case of NULL.
Signed-off-by: Aditya Pakki <pakki001@umn.edu>
Acked-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
In bnxt_qplib_map_tc2cos(), bnxt_qplib_rcfw_send_message() can return an
error value but it is lost. Propagate this error to the callers.
Signed-off-by: Aditya Pakki <pakki001@umn.edu>
Acked-By: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Drop LIST_HEAD where the variable it declares is never used.
Commit 31c02e2157 ("IPoIB: Avoid using stale last_send counter
when reaping AHs") removed the uses, but not the declaration.
The semantic patch that fixes this problem is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@@
identifier x;
@@
- LIST_HEAD(x);
... when != x
// </smpl>
Fixes: 31c02e2157 ("IPoIB: Avoid using stale last_send counter when reaping AHs")
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
We need to add advise_mr to the list of operation setters on the ib_device
or otherwise callers to ib_set_device_ops() for advise_mr operation will
not have their callback registered.
When the advise_mr series was merged with the device ops series the
SET_DEVICE_OPS() was missed.
Fixes: 813e90b1ae ("IB/mlx5: Add advise_mr() support")
Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Longer term testing shows this patch didn't play well with MR cache and
caused to call traces during remove_mkeys().
This reverts commit bb7e22a8ab.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
From device point of view both XRC target and initiator are XRC transport
type.
Fix to use the expected UID as was handled for the XRC target case to
allow its usage via verbs in DEVX context.
Fixes: 5aa3771ded ("IB/mlx5: Allow XRC usage via verbs in DEVX context")
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Merge misc updates from Andrew Morton:
- large KASAN update to use arm's "software tag-based mode"
- a few misc things
- sh updates
- ocfs2 updates
- just about all of MM
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (167 commits)
kernel/fork.c: mark 'stack_vm_area' with __maybe_unused
memcg, oom: notify on oom killer invocation from the charge path
mm, swap: fix swapoff with KSM pages
include/linux/gfp.h: fix typo
mm/hmm: fix memremap.h, move dev_page_fault_t callback to hmm
hugetlbfs: Use i_mmap_rwsem to fix page fault/truncate race
hugetlbfs: use i_mmap_rwsem for more pmd sharing synchronization
memory_hotplug: add missing newlines to debugging output
mm: remove __hugepage_set_anon_rmap()
include/linux/vmstat.h: remove unused page state adjustment macro
mm/page_alloc.c: allow error injection
mm: migrate: drop unused argument of migrate_page_move_mapping()
blkdev: avoid migration stalls for blkdev pages
mm: migrate: provide buffer_migrate_page_norefs()
mm: migrate: move migrate_page_lock_buffers()
mm: migrate: lock buffers before migrate_page_move_mapping()
mm: migration: factor out code to compute expected number of page references
mm, page_alloc: enable pcpu_drain with zone capability
kmemleak: add config to select auto scan
mm/page_alloc.c: don't call kasan_free_pages() at deferred mem init
...
This has been a fairly typical cycle, with the usual sorts of driver
updates. Several series continue to come through which improve and
modernize various parts of the core code, and we finally are starting to
get the uAPI command interface cleaned up.
- Various driver fixes for bnxt_re, cxgb3/4, hfi1, hns, i40iw, mlx4, mlx5,
qib, rxe, usnic
- Rework the entire syscall flow for uverbs to be able to run over
ioctl(). Finally getting past the historic bad choice to use write()
for command execution
- More functional coverage with the mlx5 'devx' user API
- Start of the HFI1 series for 'TID RDMA'
- SRQ support in the hns driver
- Support for new IBTA defined 2x lane widths
- A big series to consolidate all the driver function pointers into
a big struct and have drivers provide a 'static const' version of the
struct instead of open coding initialization
- New 'advise_mr' uAPI to control device caching/loading of page tables
- Support for inline data in SRPT
- Modernize how umad uses the driver core and creates cdev's and sysfs
files
- First steps toward removing 'uobject' from the view of the drivers
-----BEGIN PGP SIGNATURE-----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=T0p1
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
"This has been a fairly typical cycle, with the usual sorts of driver
updates. Several series continue to come through which improve and
modernize various parts of the core code, and we finally are starting
to get the uAPI command interface cleaned up.
- Various driver fixes for bnxt_re, cxgb3/4, hfi1, hns, i40iw, mlx4,
mlx5, qib, rxe, usnic
- Rework the entire syscall flow for uverbs to be able to run over
ioctl(). Finally getting past the historic bad choice to use
write() for command execution
- More functional coverage with the mlx5 'devx' user API
- Start of the HFI1 series for 'TID RDMA'
- SRQ support in the hns driver
- Support for new IBTA defined 2x lane widths
- A big series to consolidate all the driver function pointers into a
big struct and have drivers provide a 'static const' version of the
struct instead of open coding initialization
- New 'advise_mr' uAPI to control device caching/loading of page
tables
- Support for inline data in SRPT
- Modernize how umad uses the driver core and creates cdev's and
sysfs files
- First steps toward removing 'uobject' from the view of the drivers"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (193 commits)
RDMA/srpt: Use kmem_cache_free() instead of kfree()
RDMA/mlx5: Signedness bug in UVERBS_HANDLER()
IB/uverbs: Signedness bug in UVERBS_HANDLER()
IB/mlx5: Allocate the per-port Q counter shared when DEVX is supported
IB/umad: Start using dev_groups of class
IB/umad: Use class_groups and let core create class file
IB/umad: Refactor code to use cdev_device_add()
IB/umad: Avoid destroying device while it is accessed
IB/umad: Simplify and avoid dynamic allocation of class
IB/mlx5: Fix wrong error unwind
IB/mlx4: Remove set but not used variable 'pd'
RDMA/iwcm: Don't copy past the end of dev_name() string
IB/mlx5: Fix long EEH recover time with NVMe offloads
IB/mlx5: Simplify netdev unbinding
IB/core: Move query port to ioctl
RDMA/nldev: Expose port_cap_flags2
IB/core: uverbs copy to struct or zero helper
IB/rxe: Reuse code which sets port state
IB/rxe: Make counters thread safe
IB/mlx5: Use the correct commands for UMEM and UCTX allocation
...
This is mostly update of the usual drivers: smarpqi, lpfc, qedi,
megaraid_sas, libsas, zfcp, mpt3sas, hisi_sas. Additionally, we have
a pile of annotation, unused variable and minor updates. The big API
change is the updates for Christoph's DMA rework which include
removing the DISABLE_CLUSTERING flag. And finally there are a couple
of target tree updates.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCXCEUNiYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishdjKAP9vrTTv
qFaYmAoRSbPq9ZiixaXLMy0K/6o76Uay0gnBqgD/fgn3jg/KQ6alNaCjmfeV3wAj
u1j3H7tha9j1it+4pUw=
=GDa+
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"This is mostly update of the usual drivers: smarpqi, lpfc, qedi,
megaraid_sas, libsas, zfcp, mpt3sas, hisi_sas.
Additionally, we have a pile of annotation, unused variable and minor
updates.
The big API change is the updates for Christoph's DMA rework which
include removing the DISABLE_CLUSTERING flag.
And finally there are a couple of target tree updates"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (259 commits)
scsi: isci: request: mark expected switch fall-through
scsi: isci: remote_node_context: mark expected switch fall-throughs
scsi: isci: remote_device: Mark expected switch fall-throughs
scsi: isci: phy: Mark expected switch fall-through
scsi: iscsi: Capture iscsi debug messages using tracepoints
scsi: myrb: Mark expected switch fall-throughs
scsi: megaraid: fix out-of-bound array accesses
scsi: mpt3sas: mpt3sas_scsih: Mark expected switch fall-through
scsi: fcoe: remove set but not used variable 'port'
scsi: smartpqi: call pqi_free_interrupts() in pqi_shutdown()
scsi: smartpqi: fix build warnings
scsi: smartpqi: update driver version
scsi: smartpqi: add ofa support
scsi: smartpqi: increase fw status register read timeout
scsi: smartpqi: bump driver version
scsi: smartpqi: add smp_utils support
scsi: smartpqi: correct lun reset issues
scsi: smartpqi: correct volume status
scsi: smartpqi: do not offline disks for transient did no connect conditions
scsi: smartpqi: allow for larger raid maps
...
Patch series "mmu notifier contextual informations", v2.
This patchset adds contextual information, why an invalidation is
happening, to mmu notifier callback. This is necessary for user of mmu
notifier that wish to maintains their own data structure without having to
add new fields to struct vm_area_struct (vma).
For instance device can have they own page table that mirror the process
address space. When a vma is unmap (munmap() syscall) the device driver
can free the device page table for the range.
Today we do not have any information on why a mmu notifier call back is
happening and thus device driver have to assume that it is always an
munmap(). This is inefficient at it means that it needs to re-allocate
device page table on next page fault and rebuild the whole device driver
data structure for the range.
Other use case beside munmap() also exist, for instance it is pointless
for device driver to invalidate the device page table when the
invalidation is for the soft dirtyness tracking. Or device driver can
optimize away mprotect() that change the page table permission access for
the range.
This patchset enables all this optimizations for device drivers. I do not
include any of those in this series but another patchset I am posting will
leverage this.
The patchset is pretty simple from a code point of view. The first two
patches consolidate all mmu notifier arguments into a struct so that it is
easier to add/change arguments. The last patch adds the contextual
information (munmap, protection, soft dirty, clear, ...).
This patch (of 3):
To avoid having to change many callback definition everytime we want to
add a parameter use a structure to group all parameters for the
mmu_notifier invalidate_range_start/end callback. No functional changes
with this patch.
[akpm@linux-foundation.org: fix drivers/gpu/drm/amd/amdgpu/amdgpu_mn.c kerneldoc]
Link: http://lkml.kernel.org/r/20181205053628.3210-2-jglisse@redhat.com
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Acked-by: Jan Kara <jack@suse.cz>
Acked-by: Jason Gunthorpe <jgg@mellanox.com> [infiniband]
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Cc: Ross Zwisler <zwisler@kernel.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krcmar <rkrcmar@redhat.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Felix Kuehling <felix.kuehling@amd.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
memory allocated by kmem_cache_alloc() should be freed using
kmem_cache_free(), not kfree().
Fixes: 5dabcd0456 ("RDMA/srpt: Add support for immediate data")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The "num_actions" variable needs to be signed for the error handling to
work. The maximum number of actions is less than 256 so int type is large
enough for that.
Fixes: cbfdd442c4 ("IB/uverbs: Add helper to get array size from ptr attribute")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The "num_sge" variable needs to be signed for the error handling to work.
The uverbs_attr_ptr_get_array_size() returns int so this change is safe.
Fixes: ad8a449675 ("IB/uverbs: Add support to advise_mr")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The per-port Q counter is some kernel resource and as such may be used by
few UID(s) upon DEVX usage.
To enable using it for QP/RQ when DEVX context is used need to allocate it
with a sharing mode indication to let firmware allows its usage.
The UID = 0xffff was chosen to mark it.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Start using core defined dev_groups of a class which allows to add device
attributes to the core kernel and simplify the umad module.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Jack Morgenstein <jackm@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Use class->class_groups core kernel facility to create the abi version
file instead of open coding.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Jack Morgenstein <jackm@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Refactor code to use cdev_device_add() and do other minor refactors while
modifying these functions as below.
1. Instead of returning generic -1, return an actual error for
ib_umad_init_port().
2. Introduce and use ib_umad_init_port_dev() for sm and umad char devices.
3. Instead of kobj, use more light weight kref to refcount ib_umad_device.
4. Use modern cdev_device_add() single code cut down three steps of
cdev_add(), device_create(). This further helps to move device sysfs
files to class attributes in subsequent patch.
5. Remove few empty lines while refactoring these functions.
6. Use sizeof() instead of sizeof to avoid checkpatch warning.
7. Use struct_size() for calculation of ib_umad_port.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Jack Morgenstein <jackm@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
ib_umad_reg_agent2() and ib_umad_reg_agent() access the device name in
dev_notice(), while concurrently, ib_umad_kill_port() can destroy the
device using device_destroy().
cpu-0 cpu-1
----- -----
ib_umad_ioctl()
[...] ib_umad_kill_port()
device_destroy(dev)
ib_umad_reg_agent()
dev_notice(dev)
Therefore, first mark ib_dev as NULL, to block any further access in file
ops, unregister the mad agent and destroy the device at the end after
mutex is unlocked.
This ensures that device doesn't get destroyed, while it may get accessed.
Fixes: 0f29b46d49 ("IB/mad: add new ioctl to ABI to support new registration options")
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Jack Morgenstein <jackm@mellanox.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Simplify code to have a static structure instance for umad class
allocation.
This will allow to have class attributes defined along with class
registration in subsequent patch and allows more class methods definition
similar to ib_core module.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Jack Morgenstein <jackm@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The destroy_workqueue on error unwind is missing, and the code jumps to
the wrong exit label.
Fixes: 813e90b1ae ("IB/mlx5: Add advise_mr() support")
Acked-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/infiniband/hw/mlx4/qp.c: In function '_mlx4_ib_destroy_qp':
drivers/infiniband/hw/mlx4/qp.c:1612:22: warning:
variable 'pd' set but not used [-Wunused-but-set-variable]
Fixes: e00b64f7c5 ("RDMA: Cleanup undesired pd->uobject usage")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
We now use dev_name(&ib_device->dev) instead of ib_device->name in iwpm
messages. The name field in struct device is a const char *, where as
ib_device->name is a char array of size IB_DEVICE_NAME_MAX, and it is
pre-initialized to zeros.
Since iw_cm_map() was using memcpy() to copy in the device name, and
copying IWPM_DEVNAME_SIZE bytes, it ends up copying past the end of the
source device name string and copying random bytes. This results in iwpmd
failing the REGISTER_PID request from iwcm. Thus port mapping is broken.
Validate the device and if names, and use strncpy() to inialize the entire
message field.
Fixes: 896de0090a ("RDMA/core: Use dev_name instead of ibdev->name")
Cc: stable@vger.kernel.org
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
On NVMe offloads connection with many IO queues, EEH takes long time to
recover. The culprit is the synchronize_srcu in the destroy_mkey. The
solution is to use synchronize_srcu only for ODP mkey.
Fixes: b4cfe447d4 ("IB/mlx5: Implement on demand paging by adding support for MMU notifiers")
Signed-off-by: Huy Nguyen <huyn@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When dealing with netdev unregister events, we just need to know that this
is our currently bounded netdev. There's no need to do any further
checks/queries.
This patch doesn't change any functionality.
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Add a method for query port under the uverbs global methods. Current
ib_port_attr struct is passed as a single attribute and port_cap_flags2 is
added as a new attribute to the function.
Signed-off-by: Michael Guralnik <michaelgur@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
port_cap_flags2 represents IBTA PortInfo:CapabilityMask2.
The field safely extends the RDMA_NLDEV_ATTR_CAP_FLAGS operand as it was
exported as 64 bit to allow this kind of extension.
Signed-off-by: Michael Guralnik <michaelgur@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
