Here are 2 small driver core fixes to resolve some reported problems for
5.14-rc3. They include:
- aux bus memory leak fix
- unneeded warning message removed when removing a device link.
Both have been in linux-next with no reported problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYPrY3w8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykkMwCgqxOw/jjRMrSLeTkspm7vZ9i7hi0AoMQUjjGC
7RW9oQrZvPzYeqoF7ogJ
=xmfh
-----END PGP SIGNATURE-----
Merge tag 'driver-core-5.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fixes from Greg KH:
"Here are two small driver core fixes to resolve some reported problems
for 5.14-rc3. They include:
- aux bus memory leak fix
- unneeded warning message removed when removing a device link.
Both have been in linux-next with no reported problems"
* tag 'driver-core-5.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
driver core: Prevent warning when removing a device link from unregistered consumer
driver core: auxiliary bus: Fix memory leak when driver_register() fail
Here are some small char/misc driver fixes for 5.14-rc3.
Included in here are:
- MAINTAINERS file updates for 2 changes in different driver
subsystems.
- mhi bus bugfixes
- nds32 bugfix that resolves a reported problem.
All have been in linux-next with no reported problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYPrYdw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ym0owCeOjDxm62XwA+OVQi77vrfXuKMp/kAn2FJOFaO
Jq/RZt6oFIfuTAA6YozC
=m6eW
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc fixes from Greg KH:
"Here are some small char/misc driver fixes for 5.14-rc3.
Included in here are:
- MAINTAINERS file updates for two changes in different driver
subsystems
- mhi bus bugfixes
- nds32 bugfix that resolves a reported problem
All have been in linux-next with no reported problems"
* tag 'char-misc-5.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
nds32: fix up stack guard gap
MAINTAINERS: Change ACRN HSM driver maintainer
MAINTAINERS: Update for VMCI driver
bus: mhi: pci_generic: Fix inbound IPCR channel
bus: mhi: core: Validate channel ID when processing command completions
bus: mhi: pci_generic: Apply no-op for wake using sideband wake boolean
Here are some USB fixes for 5.14-rc3 to resolve a bunch of tiny problems
reported. Included in here are:
- dtsi revert to resolve a problem which broke android systems
that relied on the dts name to find the USB controller device.
People are still working out the "real" solution for this, but
for now the revert is needed.
- core USB fix for pipe calculation found by syzbot
- typec fixes
- gadget driver fixes
- new usb-serial device ids
- new USB quirks
- xhci fixes
- usb hub fixes for power management issues reported
- other tiny fixes
All have been in linux-next with no reported problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYPrXzA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymtAQCeLCwOQUwwi3b/GIHW9Ik92eAB2C8AoNf1GZW3
NBb8mwFi7bZgANICyG7v
=65r/
-----END PGP SIGNATURE-----
Merge tag 'usb-5.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some USB fixes for 5.14-rc3 to resolve a bunch of tiny
problems reported. Included in here are:
- dtsi revert to resolve a problem which broke android systems that
relied on the dts name to find the USB controller device.
People are still working out the "real" solution for this, but for
now the revert is needed.
- core USB fix for pipe calculation found by syzbot
- typec fixes
- gadget driver fixes
- new usb-serial device ids
- new USB quirks
- xhci fixes
- usb hub fixes for power management issues reported
- other tiny fixes
All have been in linux-next with no reported problems"
* tag 'usb-5.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (27 commits)
USB: serial: cp210x: add ID for CEL EM3588 USB ZigBee stick
Revert "USB: quirks: ignore remote wake-up on Fibocom L850-GL LTE modem"
usb: cdc-wdm: fix build error when CONFIG_WWAN_CORE is not set
Revert "arm64: dts: qcom: Harmonize DWC USB3 DT nodes name"
usb: dwc2: gadget: Fix sending zero length packet in DDMA mode.
usb: dwc2: Skip clock gating on Samsung SoCs
usb: renesas_usbhs: Fix superfluous irqs happen after usb_pkt_pop()
usb: dwc2: gadget: Fix GOUTNAK flow for Slave mode.
usb: phy: Fix page fault from usb_phy_uevent
usb: xhci: avoid renesas_usb_fw.mem when it's unusable
usb: gadget: u_serial: remove WARN_ON on null port
usb: dwc3: avoid NULL access of usb_gadget_driver
usb: max-3421: Prevent corruption of freed memory
usb: gadget: Fix Unbalanced pm_runtime_enable in tegra_xudc_probe
MAINTAINERS: repair reference in USB IP DRIVER FOR HISILICON KIRIN 970
usb: typec: stusb160x: Don't block probing of consumer of "connector" nodes
usb: typec: stusb160x: register role switch before interrupt registration
USB: usb-storage: Add LaCie Rugged USB3-FW to IGNORE_UAS
usb: ehci: Prevent missed ehci interrupts with edge-triggered MSI
usb: hub: Disable USB 3 device initiated lpm if exit latency is too high
...
A collection of small fixes, mostly covering device-specific
regressions and bugs over ASoC, HD-audio and USB-audio, while the
ALSA PCM core received a few additional fixes for the possible
(new and old) regressions.
-----BEGIN PGP SIGNATURE-----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=O7fC
-----END PGP SIGNATURE-----
Merge tag 'sound-5.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of small fixes, mostly covering device-specific
regressions and bugs over ASoC, HD-audio and USB-audio, while
the ALSA PCM core received a few additional fixes for the
possible (new and old) regressions"
* tag 'sound-5.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (29 commits)
ALSA: usb-audio: Add registration quirk for JBL Quantum headsets
ALSA: hda/hdmi: Add quirk to force pin connectivity on NUC10
ALSA: pcm: Fix mmap without buffer preallocation
ALSA: pcm: Fix mmap capability check
ALSA: hda: intel-dsp-cfg: add missing ElkhartLake PCI ID
ASoC: ti: j721e-evm: Check for not initialized parent_clk_id
ASoC: ti: j721e-evm: Fix unbalanced domain activity tracking during startup
ALSA: hda/realtek: Fix pop noise and 2 Front Mic issues on a machine
ALSA: hdmi: Expose all pins on MSI MS-7C94 board
ALSA: sb: Fix potential ABBA deadlock in CSP driver
ASoC: rt5682: Fix the issue of garbled recording after powerd_dbus_suspend
ASoC: amd: reverse stop sequence for stoneyridge platform
ASoC: soc-pcm: add a flag to reverse the stop sequence
ASoC: codecs: wcd938x: setup irq during component bind
ASoC: dt-bindings: renesas: rsnd: Fix incorrect 'port' regex schema
ALSA: usb-audio: Add missing proc text entry for BESPOKEN type
ASoC: codecs: wcd938x: make sdw dependency explicit in Kconfig
ASoC: SOF: Intel: Update ADL descriptor to use ACPI power states
ASoC: rt5631: Fix regcache sync errors on resume
ALSA: pcm: Call substream ack() method upon compat mmap commit
...
* fix aggregation on mesh
* fix late enabling of 4-addr mode
* leave monitor SKBs with some headroom
* limit band information for old applications
* fix virt-wifi WARN_ON
* fix memory leak in cfg80211 BSS list maintenance
-----BEGIN PGP SIGNATURE-----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=XUhh
-----END PGP SIGNATURE-----
Merge tag 'mac80211-for-net-2021-07-23' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
Couple of fixes:
* fix aggregation on mesh
* fix late enabling of 4-addr mode
* leave monitor SKBs with some headroom
* limit band information for old applications
* fix virt-wifi WARN_ON
* fix memory leak in cfg80211 BSS list maintenance
Commit 7930742d6, reverting 26fd962, missed out on reverting an incorrect
change to a return value. The niu_pci_vpd_scan_props(..) == 1 case appears
to be a normal path - treating it as an error and return -EINVAL was
breaking VPD_SCAN and causing the driver to fail to load.
Fix, so my Neptune card works again.
Cc: Kangjie Lu <kjlu@umn.edu>
Cc: Shannon Nelson <shannon.lee.nelson@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: stable <stable@vger.kernel.org>
Fixes: 7930742d ('Revert "niu: fix missing checks of niu_pci_eeprom_read"')
Signed-off-by: Paul Jakma <paul@jakma.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Syzbot reported memory leak in qrtr. The problem was in unputted
struct sock. qrtr_local_enqueue() function calls qrtr_port_lookup()
which takes sock reference if port was found. Then there is the following
check:
if (!ipc || &ipc->sk == skb->sk) {
...
return -ENODEV;
}
Since we should drop the reference before returning from this function and
ipc can be non-NULL inside this if, we should add qrtr_port_put() inside
this if.
The similar corner case is in qrtr_endpoint_post() as Manivannan
reported. In case of sock_queue_rcv_skb() failure we need to put
port reference to avoid leaking struct sock pointer.
Fixes: e04df98adf ("net: qrtr: Remove receive worker")
Fixes: bdabad3e36 ("net: Add Qualcomm IPC router")
Reported-and-tested-by: syzbot+35a511c72ea7356cdcf3@syzkaller.appspotmail.com
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayusosays:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Memleak in commit audit error path, from Dongliang Mu.
2) Avoid possible false sharing for flowtable timeout updates
and nft_last use.
3) Adjust conntrack timestamp due to garbage collection delay,
from Florian Westphal.
4) Fix nft_nat without layer 3 address for the inet family.
5) Fix compilation warning in nfnl_hook when ingress support
is disabled, from Arnd Bergmann.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Get the number of VFs of a PF correctly by calling
rvu_get_pf_numvfs in rvu_switch_disable function.
Also hwvf is not required hence remove it.
Fixes: 23109f8dd0 ("octeontx2-af: Introduce internal packet switching")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 6cc8e74308 ("loop: scale loop device by introducing per
device lock") re-opened a race window for NULL pointer dereference at
loop_validate_file() where commit 310ca162d7 ("block/loop: Use
global lock for ioctl() operation.") has closed.
Although we need to guarantee that other loop devices will not change
during traversal, we can't take remote "struct loop_device"->lo_mutex
inside loop_validate_file() in order to avoid AB-BA deadlock. Therefore,
introduce a global lock dedicated for loop_validate_file() which is
conditionally taken before local "struct loop_device"->lo_mutex is taken.
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Fixes: 6cc8e74308 ("loop: scale loop device by introducing per device lock")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
A wwan link created via the wwan_create_default_link procedure is
never notified to the user (RTM_NEWLINK), causing issues with user
tools relying on such event to track network links (NetworkManager).
This is because the procedure misses a call to rtnl_configure_link(),
which sets the link as initialized and notifies the new link (cf
proper usage in __rtnl_newlink()).
Cc: stable@vger.kernel.org
Fixes: ca374290aa ("wwan: core: support default netdev creation")
Suggested-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Acked-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The blamed commit modified the driver to accept the addition of VID 0
without doing anything, but deleting that VID still fails:
[ 32.080780] mv88e6085 d0032004.mdio-mii:10 lan8: failed to kill vid 0081/0
Modify mv88e6xxx_port_vlan_leave() to do the same thing as the addition.
Fixes: b8b79c414e ("net: dsa: mv88e6xxx: Fix adding vlan 0")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Decrease hop limit counter when deliver skb to ndp proxy.
Signed-off-by: Kangmin Park <l4stpr0gr4m@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In cases where the header straight after the tunnel header was
another ethernet header (TEB), instead of the network header,
the ECN decapsulation code would treat the ethernet header as if
it was an IP header, resulting in mishandling and possible
wrong drops or corruption of the IP header.
In this case, ECT(1) is sent, so IP_ECN_decapsulate tries to copy it to the
inner IPv4 header, and correct its checksum.
The offset of the ECT bits in an IPv4 header corresponds to the
lower 2 bits of the second octet of the destination MAC address
in the ethernet header.
The IPv4 checksum corresponds to end of the source address.
In order to reproduce:
$ ip netns add A
$ ip netns add B
$ ip -n A link add _v0 type veth peer name _v1 netns B
$ ip -n A link set _v0 up
$ ip -n A addr add dev _v0 10.254.3.1/24
$ ip -n A route add default dev _v0 scope global
$ ip -n B link set _v1 up
$ ip -n B addr add dev _v1 10.254.1.6/24
$ ip -n B route add default dev _v1 scope global
$ ip -n B link add gre1 type gretap local 10.254.1.6 remote 10.254.3.1 key 0x49000000
$ ip -n B link set gre1 up
# Now send an IPv4/GRE/Eth/IPv4 frame where the outer header has ECT(1),
# and the inner header has no ECT bits set:
$ cat send_pkt.py
#!/usr/bin/env python3
from scapy.all import *
pkt = IP(b'E\x01\x00\xa7\x00\x00\x00\x00@/`%\n\xfe\x03\x01\n\xfe\x01\x06 \x00eXI\x00'
b'\x00\x00\x18\xbe\x92\xa0\xee&\x18\xb0\x92\xa0l&\x08\x00E\x00\x00}\x8b\x85'
b'@\x00\x01\x01\xe4\xf2\x82\x82\x82\x01\x82\x82\x82\x02\x08\x00d\x11\xa6\xeb'
b'3\x1e\x1e\\xf3\\xf7`\x00\x00\x00\x00ZN\x00\x00\x00\x00\x00\x00\x10\x11\x12'
b'\x13\x14\x15\x16\x17\x18\x19\x1a\x1b\x1c\x1d\x1e\x1f !"#$%&\'()*+,-./01234'
b'56789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ')
send(pkt)
$ sudo ip netns exec B tcpdump -neqlllvi gre1 icmp & ; sleep 1
$ sudo ip netns exec A python3 send_pkt.py
In the original packet, the source/destinatio MAC addresses are
dst=18:be:92:a0:ee:26 src=18:b0:92:a0:6c:26
In the received packet, they are
dst=18:bd:92:a0:ee:26 src=18:b0:92:a0:6c:27
Thanks to Lahav Schlesinger <lschlesinger@drivenets.com> and Isaac Garzon <isaac@speed.io>
for helping me pinpoint the origin.
Fixes: b723748750 ("tunnel: Propagate ECT(1) when decapsulating as recommended by RFC6040")
Cc: David S. Miller <davem@davemloft.net>
Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
Cc: David Ahern <dsahern@kernel.org>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Gilad Naaman <gnaaman@drivenets.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The release_sock() is blocking function, it would change the state
after sleeping. In order to evaluate the stated condition outside
the socket lock context, switch to use wait_woken() instead.
Fixes: 6398e23cdb ("tipc: standardize accept routine")
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: Hoang Le <hoang.h.le@dektech.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
For implicit-connect, when it's either SYN- or SYN+, an ACK should
be sent back to the client immediately. It's not appropriate for
the client to enter established state only after receiving data
from the server.
On client side, after the SYN is sent out, tipc_wait_for_connect()
should be called to wait for the ACK if timeout is set.
This patch also restricts __tipc_sendstream() to call __sendmsg()
only when it's in TIPC_OPEN state, so that the client can program
in a single loop doing both connecting and data sending like:
for (...)
sendmsg(dest, buf);
This makes the implicit-connect more implicit.
Fixes: b97bf3fd8f ("[TIPC] Initial merge")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove devm_kfree of memory where VLAN entry to RVU PF mapping
info is saved. This will be freed anyway at driver exit.
Having this could result in warning from devm_kfree() if
the memory is not allocated due to errors in rvu_nix_block_init()
before nix_setup_txvlan().
Fixes: 9a946def26 ("octeontx2-af: Modify nix_vtag_cfg mailbox to support TX VTAG entries")
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix missing failed message if driver does not have enough queues to
complete TC command. Without this fix no message is displayed in dmesg.
Fixes: a9ce82f744 ("i40e: Enable 'channel' mode in mqprio for TC configs")
Signed-off-by: Grzegorz Szczurek <grzegorzx.szczurek@intel.com>
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Tested-by: Imam Hassan Reza Biswas <imam.hassan.reza.biswas@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
In SW DCB mode the packets sent receive incorrect UP tags. They are
constructed correctly and put into tx_ring, but UP is later remapped by
HW on the basis of TCTUPR register contents according to Tx queue
selected, and BW used is consistent with the new UP values. This is
caused by Tx queue selection in kernel not taking into account DCB
configuration. This patch fixes the issue by implementing the
ndo_select_queue NDO callback.
Fixes: fd0a05ce74 ("i40e: transmit, receive, and NAPI")
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Tested-by: Imam Hassan Reza Biswas <imam.hassan.reza.biswas@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
In case of PHY type error occurs, the message was too generic.
Add additional info to PHY type error indicating that it can be
wrong cable connected.
Fixes: 124ed15bf1 ("i40e: Add dual speed module support")
Signed-off-by: Lukasz Cieplicki <lukaszx.cieplicki@intel.com>
Signed-off-by: Michal Maloszewski <michal.maloszewski@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Make warning meaningful for the user.
Previously the trace:
"Starting FW LLDP agent failed: error: I40E_ERR_ADMIN_QUEUE_ERROR, I40E_AQ_RC_EAGAIN"
was produced when user tried to start Firmware LLDP agent,
just after it was stopped with sequence:
ethtool --set-priv-flags <dev> disable-fw-lldp on
ethtool --set-priv-flags <dev> disable-fw-lldp off
(without any delay between the commands)
At that point the firmware is still processing stop command, the behavior
is expected.
Fixes: c1041d0704 ("i40e: Missing response checks in driver when starting/stopping FW LLDP")
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Tested-by: Imam Hassan Reza Biswas <imam.hassan.reza.biswas@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Correct the message flow between driver and firmware when disabling
queues.
Previously in case of PF reset (due to required reinit after reconfig),
the error like: "VSI seid 397 Tx ring 60 disable timeout" could show up
occasionally. The error was not a real issue of hardware or firmware,
it was caused by wrong sequence of messages invoked by the driver.
Fixes: 41c445ff0f ("i40e: main driver core")
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Because of the significant overhead that retpolines pose on indirect
calls, the tracepoint code was updated to use the new "static_calls" that
can modify the running code to directly call a function instead of using
an indirect caller, and this function can be changed at runtime.
In the tracepoint code that calls all the registered callbacks that are
attached to a tracepoint, the following is done:
it_func_ptr = rcu_dereference_raw((&__tracepoint_##name)->funcs);
if (it_func_ptr) {
__data = (it_func_ptr)->data;
static_call(tp_func_##name)(__data, args);
}
If there's just a single callback, the static_call is updated to just call
that callback directly. Once another handler is added, then the static
caller is updated to call the iterator, that simply loops over all the
funcs in the array and calls each of the callbacks like the old method
using indirect calling.
The issue was discovered with a race between updating the funcs array and
updating the static_call. The funcs array was updated first and then the
static_call was updated. This is not an issue as long as the first element
in the old array is the same as the first element in the new array. But
that assumption is incorrect, because callbacks also have a priority
field, and if there's a callback added that has a higher priority than the
callback on the old array, then it will become the first callback in the
new array. This means that it is possible to call the old callback with
the new callback data element, which can cause a kernel panic.
static_call = callback1()
funcs[] = {callback1,data1};
callback2 has higher priority than callback1
CPU 1 CPU 2
----- -----
new_funcs = {callback2,data2},
{callback1,data1}
rcu_assign_pointer(tp->funcs, new_funcs);
/*
* Now tp->funcs has the new array
* but the static_call still calls callback1
*/
it_func_ptr = tp->funcs [ new_funcs ]
data = it_func_ptr->data [ data2 ]
static_call(callback1, data);
/* Now callback1 is called with
* callback2's data */
[ KERNEL PANIC ]
update_static_call(iterator);
To prevent this from happening, always switch the static_call to the
iterator before assigning the tp->funcs to the new array. The iterator will
always properly match the callback with its data.
To trigger this bug:
In one terminal:
while :; do hackbench 50; done
In another terminal
echo 1 > /sys/kernel/tracing/events/sched/sched_waking/enable
while :; do
echo 1 > /sys/kernel/tracing/set_event_pid;
sleep 0.5
echo 0 > /sys/kernel/tracing/set_event_pid;
sleep 0.5
done
And it doesn't take long to crash. This is because the set_event_pid adds
a callback to the sched_waking tracepoint with a high priority, which will
be called before the sched_waking trace event callback is called.
Note, the removal to a single callback updates the array first, before
changing the static_call to single callback, which is the proper order as
the first element in the array is the same as what the static_call is
being changed to.
Link: https://lore.kernel.org/io-uring/4ebea8f0-58c9-e571-fd30-0ce4f6f09c70@samba.org/
Cc: stable@vger.kernel.org
Fixes: d25e37d89d ("tracepoint: Optimize using static_call()")
Reported-by: Stefan Metzmacher <metze@samba.org>
tested-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The variable ret is being initialized with a value that is never
read, it is being updated later on. The assignment is redundant and
can be removed.
Link: https://lkml.kernel.org/r/20210721120915.122278-1-colin.king@canonical.com
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
synchronize_rcu_tasks_rude() triggers IPIs and forces rescheduling on
all CPUs. It is a costly operation and, when targeting nohz_full CPUs,
very disrupting (hence the name). So avoid calling it when 'old_hash'
doesn't need to be freed.
Link: https://lkml.kernel.org/r/20210721114726.1545103-1-nsaenzju@redhat.com
Signed-off-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
alloc_synth_event() currently has the following code to initialize the
event fields and dynamic_fields:
for (i = 0, j = 0; i < n_fields; i++) {
event->fields[i] = fields[i];
if (fields[i]->is_dynamic) {
event->dynamic_fields[j] = fields[i];
event->dynamic_fields[j]->field_pos = i;
event->dynamic_fields[j++] = fields[i];
event->n_dynamic_fields++;
}
}
1) It would make more sense to have all fields keep track of their
field_pos.
2) event->dynmaic_fields[j] is assigned twice for no reason.
3) We can move updating event->n_dynamic_fields outside the loop, and just
assign it to j.
This combination makes the code much cleaner.
Link: https://lkml.kernel.org/r/20210721195341.29bb0f77@oasis.local.home
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The only user of this variable is in an #ifdef:
net/netfilter/nfnetlink_hook.c: In function 'nfnl_hook_entries_head':
net/netfilter/nfnetlink_hook.c:177:28: error: unused variable 'netdev' [-Werror=unused-variable]
Fixes: e2cf17d377 ("netfilter: add new hook nfnl subsystem")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Currently the histogram logic allows the user to write "cpu" in as an
event field, and it will record the CPU that the event happened on.
The problem with this is that there's a lot of events that have "cpu"
as a real field, and using "cpu" as the CPU it ran on, makes it
impossible to run histograms on the "cpu" field of events.
For example, if I want to have a histogram on the count of the
workqueue_queue_work event on its cpu field, running:
># echo 'hist:keys=cpu' > events/workqueue/workqueue_queue_work/trigger
Gives a misleading and wrong result.
Change the command to "common_cpu" as no event should have "common_*"
fields as that's a reserved name for fields used by all events. And
this makes sense here as common_cpu would be a field used by all events.
Now we can even do:
># echo 'hist:keys=common_cpu,cpu if cpu < 100' > events/workqueue/workqueue_queue_work/trigger
># cat events/workqueue/workqueue_queue_work/hist
# event histogram
#
# trigger info: hist:keys=common_cpu,cpu:vals=hitcount:sort=hitcount:size=2048 if cpu < 100 [active]
#
{ common_cpu: 0, cpu: 2 } hitcount: 1
{ common_cpu: 0, cpu: 4 } hitcount: 1
{ common_cpu: 7, cpu: 7 } hitcount: 1
{ common_cpu: 0, cpu: 7 } hitcount: 1
{ common_cpu: 0, cpu: 1 } hitcount: 1
{ common_cpu: 0, cpu: 6 } hitcount: 2
{ common_cpu: 0, cpu: 5 } hitcount: 2
{ common_cpu: 1, cpu: 1 } hitcount: 4
{ common_cpu: 6, cpu: 6 } hitcount: 4
{ common_cpu: 5, cpu: 5 } hitcount: 14
{ common_cpu: 4, cpu: 4 } hitcount: 26
{ common_cpu: 0, cpu: 0 } hitcount: 39
{ common_cpu: 2, cpu: 2 } hitcount: 184
Now for backward compatibility, I added a trick. If "cpu" is used, and
the field is not found, it will fall back to "common_cpu" and work as
it did before. This way, it will still work for old programs that use
"cpu" to get the actual CPU, but if the event has a "cpu" as a field, it
will get that event's "cpu" field, which is probably what it wants
anyway.
I updated the tracefs/README to include documentation about both the
common_timestamp and the common_cpu. This way, if that text is present in
the README, then an application can know that common_cpu is supported over
just plain "cpu".
Link: https://lkml.kernel.org/r/20210721110053.26b4f641@oasis.local.home
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: stable@vger.kernel.org
Fixes: 8b7622bf94 ("tracing: Add cpu field for hist triggers")
Reviewed-by: Tom Zanussi <zanussi@kernel.org>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
nft_nat reports a bogus EAFNOSUPPORT if no layer 3 information is specified.
Fixes: d07db9884a ("netfilter: nf_tables: introduce nft_validate_register_load()")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
In case the entry is evicted via garbage collection there is
delay between the timeout value and the eviction event.
This adjusts the stop value based on how much time has passed.
Fixes: b87a2f9199 ("netfilter: conntrack: add gc worker to remove timed-out entries")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The flowtable follows the same timeout approach as conntrack, use the
same idiom as in cc16921351 ("netfilter: conntrack: avoid same-timeout
update") but also include the fix provided by e37542ba11 ("netfilter:
conntrack: avoid possible false sharing").
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
When we exceed the limit of BSS entries, this function will free the
new entry, however, at this time, it is the last door to access the
inputed ies, so these ies will be unreferenced objects and cause memory
leak.
Therefore we should free its ies before deallocating the new entry, beside
of dropping it from hidden_list.
Signed-off-by: Nguyen Dinh Phi <phind.uet@gmail.com>
Link: https://lore.kernel.org/r/20210628132334.851095-1-phind.uet@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In non-split data, we shouldn't be adding S1G and 6 GHz
data (or future bands) since we're really close to the
4k message size limit. Remove those bands, any modern
userspace that can use S1G or 6 GHz should already be
using split dumps, and if not then it needs to update.
Link: https://lore.kernel.org/r/20210712215329.31444162a2c2.I5555312e4a074c84f8b4e7ad79dc4d1fbfc5126c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Notify the driver about the 4-address mode change and also send a nulldata
packet to the AP to notify it about the change
Fixes: 1ff4e8f2de ("mac80211: notify the driver when a sta uses 4-address mode")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20210702050111.47546-1-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The logic for starting aggregation sessions was recently moved from minstrel_ht
to mac80211, into the subif tx handler just after the sta lookup.
Unfortunately this didn't work for mesh interfaces, since the sta lookup is
deferred until a much later point in time on those.
Fix this by also calling the aggregation check right after the deferred sta
lookup.
Fixes: 08a46c6420 ("mac80211: move A-MPDU session check from minstrel_ht to mac80211")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20210629112853.29785-1-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When a monitor interface is present together with other interfaces, a
received skb is copied and received on the monitor netdev. Before, the
copied skb was allocated with exactly the amount of space needed for
the radiotap header, resulting in an skb without any headroom at all
being received on the monitor netdev. With the introduction of eBPF
and XDP in the kernel, skbs may be processed by custom eBPF programs.
However, since the skb cannot be reallocated in the eBPF program, no
more data or headers can be pushed. The old code made sure the final
headroom was zero regardless of the value of NET_SKB_PAD, so increasing
that constant would have no effect.
Now we allocate monitor skb copies with a headroom of NET_SKB_PAD bytes
before the radiotap header. Monitor interfaces now behave in the same
way as other netdev interfaces that honor the NET_SKB_PAD constant.
Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Link: https://lore.kernel.org/r/20210628123713.2070753-1-johan.almbladh@anyfinetworks.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The H_ENTER_NESTED hypercall is handled by the L0, and it is a request
by the L1 to switch the context of the vCPU over to that of its L2
guest, and return with an interrupt indication. The L1 is responsible
for switching some registers to guest context, and the L0 switches
others (including all the hypervisor privileged state).
If the L2 MSR has TM active, then the L1 is responsible for
recheckpointing the L2 TM state. Then the L1 exits to L0 via the
H_ENTER_NESTED hcall, and the L0 saves the TM state as part of the exit,
and then it recheckpoints the TM state as part of the nested entry and
finally HRFIDs into the L2 with TM active MSR. Not efficient, but about
the simplest approach for something that's horrendously complicated.
Problems arise if the L1 exits to the L0 with a TM state which does not
match the L2 TM state being requested. For example if the L1 is
transactional but the L2 MSR is non-transactional, or vice versa. The
L0's HRFID can take a TM Bad Thing interrupt and crash.
Fix this by disallowing H_ENTER_NESTED in TM[T] state entirely, and then
ensuring that if the L1 is suspended then the L2 must have TM active,
and if the L1 is not suspended then the L2 must not have TM active.
Fixes: 360cae3137 ("KVM: PPC: Book3S HV: Nested guest entry via hypercall")
Cc: stable@vger.kernel.org # v4.20+
Reported-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Acked-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The kvmppc_rtas_hcall() sets the host rtas_args.rets pointer based on
the rtas_args.nargs that was provided by the guest. That guest nargs
value is not range checked, so the guest can cause the host rets pointer
to be pointed outside the args array. The individual rtas function
handlers check the nargs and nrets values to ensure they are correct,
but if they are not, the handlers store a -3 (0xfffffffd) failure
indication in rets[0] which corrupts host memory.
Fix this by testing up front whether the guest supplied nargs and nret
would exceed the array size, and fail the hcall directly without storing
a failure indication to rets[0].
Also expand on a comment about why we kill the guest and try not to
return errors directly if we have a valid rets[0] pointer.
Fixes: 8e591cb720 ("KVM: PPC: Book3S: Add infrastructure to implement kernel-side RTAS calls")
Cc: stable@vger.kernel.org # v3.10+
Reported-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The check that is done in setup_bootmem currently only works for 32-bit
kernel since the kernel mapping has been moved outside of the linear
mapping for 64-bit kernel. So make sure that for 64-bit kernel, the kernel
mapping does not overlap with the last 4K of the addressable memory.
Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
Fixes: 2bfc6cd81b ("riscv: Move kernel mapping outside of linear mapping")
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
For 64-bit kernel, the end of the address space is occupied by the
kernel mapping and currently, the functions to populate the kernel page
tables (i.e. create_p*d_mapping) do not override existing mapping so we
must make sure the linear mapping does not map memory in the kernel mapping
by clipping the memory above the memory limit.
Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
Fixes: c9811e379b ("riscv: Add mem kernel parameter support")
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
As described in Documentation/riscv/vm-layout.rst, the end of the
virtual address space for 64-bit kernel is occupied by the modules/BPF/
kernel mappings so this actually reduces the amount of memory we are able
to map and then use in the linear mapping. So make sure this limit is
correctly set.
Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
Fixes: 2bfc6cd81b ("riscv: Move kernel mapping outside of linear mapping")
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Remove the conditional checking for out_data_len and skipping the fallocate
if it is 0. This is wrong will actually change any legitimate the fallocate
where the entire region is unallocated into a no-op.
Additionally, before allocating the range, if FALLOC_FL_KEEP_SIZE is set then
we need to clamp the length of the fallocate region as to not extend the size of the file.
Fixes: 966a3cb7c7 ("cifs: improve fallocate emulation")
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Hi Linus,
Please, pull the following patch that fixes a fall-through warning
when building with Clang and -Wimplicit-fallthrough on PowerPC.
Thanks
-----BEGIN PGP SIGNATURE-----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=nqZC
-----END PGP SIGNATURE-----
Merge tag 'fallthrough-fixes-clang-5.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux
Pull fallthrough fix from Gustavo Silva:
"Fix a fall-through warning when building with -Wimplicit-fallthrough
on PowerPC"
* tag 'fallthrough-fixes-clang-5.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux:
powerpc/pasemi: Fix fall-through warning for Clang
and fence error propagation and a GVT fix of shadow ppgtt invalidation
with proper D3 state tracking from Colin.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEbSBwaO7dZQkcLOKj+mJfZA7rE8oFAmD5dZ4ACgkQ+mJfZA7r
E8oOjggAmpH/KcwfiQMoVx8ie28bO5bZzLTX05Cchi1DJ3Av3WuHFalekw+3AAJc
s58fU2eLp/FKZ796OPNZLtmVgA2984UioDI9TePUn5kQ0PixJh5p7hpuywDBafpH
C8jgp1dPbMDtTZGbLLt40tJYDNFKnaqQXiTYeDsqXhqlELcD9wfiqU6MwnBkmuoC
kAdYvHcXrnnavfT7faXW3VFhJWYPB5Ow9tFXG2taeGXlh08Jsb6pek/eukgHKmkP
10leCkrYVpCbju2LJnUMwX4cV9cxfF4hYPakB/TpuvH8QeMD2tFWuEjljCgxI5BR
l1spFg7NSiuMAsN5wocLFDvY3Y3hHw==
=jhBB
-----END PGP SIGNATURE-----
Merge tag 'drm-intel-fixes-2021-07-22' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
Couple reverts from Jason getting rid of asynchronous command parsing
and fence error propagation and a GVT fix of shadow ppgtt invalidation
with proper D3 state tracking from Colin.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YPl1sIyruD0U5Orl@intel.com
