Xilinx ZYNQMP logicoreIP Init driver is based on the new
LogiCoreIP design created. This driver provides the processing system
and programmable logic isolation. Set the frequency based on the clock
information get from the logicoreIP register set.
Signed-off-by: Dhaval Shah <dshah@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
- Update i.MX GPC driver to support PCI power domain of i.MX6SX SoC.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJaTCqGAAoJEFBXWFqHsHzOavcH/1g0k3tN4MaOvf44lSDm5uCZ
WqCKLN01f8T02YegdcgVVc59wirJB6xKIYD86dQIiVC8gEfMOhvfEuv6qkPRHQOM
WVYJTIFFisEeypnXEHjD2SwN6/SskSGPMUDpfj0hveb0srLnCQou+5Ty8zpvmAdl
XEAP9mjK7s6ovfomfuxEY4iWxGRKbDXtwXqtvYTI3tpXwn/c6LXgdrg02xC/KAXp
sKXbS0NbYjBDHBd8hPcVVwujugw3UZHr/saYYf0rmC7WKr7074WylSWW08aKQ89u
Elv5fNeoAYrlnwpeoqzLqcgrvhCJcpx0HTVnYjmNIVLYRLAktYu6glR7icAdpb8=
=kB/f
-----END PGP SIGNATURE-----
Merge tag 'imx-drivers-4.16' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/drivers
Pull "i.MX drivers update for 4.16" from Shawn Guo:
- Update i.MX GPC driver to support PCI power domain of i.MX6SX SoC.
* tag 'imx-drivers-4.16' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
soc: imx: gpc: Add i.MX6SX PCI power domain
* rcar-sysc: Keep wakeup sources active during system suspend
Geert Uytterhoeven says "If an R-Car SYSC slave device is part of the
CPG/MSTP or CPG/MSSR Clock Domain and to be used as a wakeup source, it
must be kept active during system suspend.
Currently this is handled in device-specific drivers by explicitly
increasing the use count of the module clock when the device is
configured as a wakeup source. However, the proper way to prevent the
device from being stopped is to inform this requirement to the genpd
core, by setting the GENPD_FLAG_ACTIVE_WAKEUP flag.
Note that this will only affect devices configured as wakeup sources."
-----BEGIN PGP SIGNATURE-----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=0tvJ
-----END PGP SIGNATURE-----
Merge tag 'renesas-soc2-for-v4.16' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/soc
Second Round of Renesas ARM Based SoC Updates for v4.16
* rcar-sysc: Keep wakeup sources active during system suspend
Geert Uytterhoeven says "If an R-Car SYSC slave device is part of the
CPG/MSTP or CPG/MSSR Clock Domain and to be used as a wakeup source, it
must be kept active during system suspend.
Currently this is handled in device-specific drivers by explicitly
increasing the use count of the module clock when the device is
configured as a wakeup source. However, the proper way to prevent the
device from being stopped is to inform this requirement to the genpd
core, by setting the GENPD_FLAG_ACTIVE_WAKEUP flag.
Note that this will only affect devices configured as wakeup sources."
* tag 'renesas-soc2-for-v4.16' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
soc: renesas: rcar-sysc: Keep wakeup sources active during system suspend
Signed-off-by: Olof Johansson <olof@lixom.net>
The SPS power domain driver is extended for S700 SoC.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=u1IY
-----END PGP SIGNATURE-----
Merge tag 'actions-drivers-for-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/afaerber/linux-actions into next/drivers
Actions Semi SoC drivers for v4.16
The SPS power domain driver is extended for S700 SoC.
* tag 'actions-drivers-for-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/afaerber/linux-actions:
soc: actions: sps: Add S700
Signed-off-by: Olof Johansson <olof@lixom.net>
4.16, please pull the following:
- Arnd provides an update to the Raspberry Pi firmware interface and uses time64_t to
print the time to make it more future proof
- Florian provides a set of updates to make the Broadcom STB Bus Interface Unit code
work on newer ARM64-based chips, as well as perform the correct interface tuning
for these chips to reach the expected performance
-----BEGIN PGP SIGNATURE-----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=RHHM
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-4.16/drivers' of http://github.com/Broadcom/stblinux into next/drivers
This pull request contains Broadcom ARM/ARM64 based SoCs drivers changes for
4.16, please pull the following:
- Arnd provides an update to the Raspberry Pi firmware interface and uses time64_t to
print the time to make it more future proof
- Florian provides a set of updates to make the Broadcom STB Bus Interface Unit code
work on newer ARM64-based chips, as well as perform the correct interface tuning
for these chips to reach the expected performance
* tag 'arm-soc/for-4.16/drivers' of http://github.com/Broadcom/stblinux:
soc: brcmstb: biuctrl: Move to early_initcall
soc: brcmstb: Split initialization
soc: brcmstb: biuctrl: Fine tune B53 MCP interface settings
soc: brcmstb: biuctrl: Wire-up new registers
soc: brcmstb: biuctrl: Prepare for saving/restoring other registers
soc: brcmstb: Correct CPU_CREDIT_REG offset for Brahma-B53 CPUs
soc: brcmstb: Make CPU credit offset more parameterized
dt-bindings: arm: brcmstb: Correct BIUCTRL node documentation
dt-bindings: arm: Add entry for Broadcom Brahma-B53
firmware: raspberrypi: print time using time64_t
Signed-off-by: Olof Johansson <olof@lixom.net>
This adds an SoC driver for the Gemini. Currently there
is only one thing not fitting into any other framework,
and that is the bus arbitration setting.
All Gemini vendor trees seem to be setting this register to
exactly the same arbitration so we just add a small code
snippet to do this at subsys_init() time before any other
drivers kick in.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* Add a jump target so that a specific error message is stored only once
at the end of this function implementation.
* Replace two calls of the function "dev_err" by goto statements.
* Adjust two condition checks.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
i.MX6SX has a PCI power domain in PGC. Add support for it.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Acked-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
- add support for mt2701 scpsys driver
binding documentation
extend driver to allow the bus protection to overwrite the register
-----BEGIN PGP SIGNATURE-----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=5u17
-----END PGP SIGNATURE-----
Merge tag 'v4.15-next-soc' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into next/soc
Pull "arm: Updates for soc driver for v4.15-next" from Matthias Brugger:
- change kconfig entry for armv7 SoCs to be more generic
- add support for mt2701 scpsys driver
binding documentation
extend driver to allow the bus protection to overwrite the register
* tag 'v4.15-next-soc' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
soc: mediatek: add MT2712 scpsys support
soc: mediatek: add dependent clock jpgdec/audio for scpsys
soc: mediatek: extend bus protection API
dt-bindings: soc: add MT2712 power dt-bindings
ARM: mediatek: use more generic prompts for SoCs with ARMv7
Fuse and chip ID support for Tegra186 is added in this set of changes,
followed by some unification work for the PMC driver in order to avoid
code duplication between Tegra186 and prior chips.
This also contains a couple of fixes for reading fuses on Tegra20.
-----BEGIN PGP SIGNATURE-----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=3l9M
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-4.16-soc-2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/soc
Pull "soc/tegra: Changes for v4.16-rc1" from Thierry Reding:
Fuse and chip ID support for Tegra186 is added in this set of changes,
followed by some unification work for the PMC driver in order to avoid
code duplication between Tegra186 and prior chips.
This also contains a couple of fixes for reading fuses on Tegra20.
* tag 'tegra-for-4.16-soc-2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
soc/tegra: fuse: Explicitly request DMA channel from APB DMA driver
soc/tegra: fuse: Fix reading registers using DMA on Tegra20
soc/tegra: pmc: Consolidate Tegra186 support
soc/tegra: pmc: Parameterize driver
soc/tegra: fuse: Add Tegra186 chip ID support
soc/tegra: fuse: Warn if accessing unmapped registers
soc/tegra: fuse: Move register mapping check
soc/tegra: fuse: Add Tegra186 support
dt-bindings: misc: Add Tegra186 MISC registers bindings
Currently fuse driver requests DMA channel from an arbitrary DMA device,
it is not a problem since there is only one DMA provider for Tegra20 yet,
but it may become troublesome if another provider will appear.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
FUSE driver doesn't configure DMA channel properly, because of it DMA
transfer is never issued and tegra20_fuse_read() always return 0x0.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
* Identify R-Car M3-W ES1.1
Geert Uytterhoeven says "The Product Register of R-Car M3-W ES1.1
incorrectly identifies the SoC revision as ES2.0. Add a workaround to
fix this."
It is my understanding that this is likely to be forwards-compatibile.
-----BEGIN PGP SIGNATURE-----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=eL6d
-----END PGP SIGNATURE-----
Merge tag 'renesas-soc-for-v4.16' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/soc
Pull "Renesas ARM Based SoC Updates for v4.16" from Simon Horman:
* Identify R-Car M3-W ES1.1
Geert Uytterhoeven says "The Product Register of R-Car M3-W ES1.1
incorrectly identifies the SoC revision as ES2.0. Add a workaround to
fix this."
It is my understanding that this is likely to be forwards-compatibile.
* tag 'renesas-soc-for-v4.16' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
soc: renesas: Identify R-Car M3-W ES1.1
There are dependent clock jpgdec/audio in scpsys on MT2712,
and will exist three dependent clocks on MT2712 VDEC.
Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
MT2712 add "set/clear" bus control register to each control register set
instead of providing only one "enable" control register, we could avoid
the read-modify-write racing by declaring "bus_prot_reg_update" as "false"
in scp_soc_data or declaring as "true" to use the legacy update method.
By improving the mtk-infracfg bus protection implementation to
support set/clear bus protection control method by IC configuration.
Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Being called during early_initcall() is early enough that it occurs
before SMP initialization, which is all we care about for the Bus
Interface Unit configuration.
This solves lack of BIU initialization on ARM64 platforms where we do
not have an anchor where to put the BIU initialization (since there are
no machine descriptors).
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
We may need access to family_id and product_id fairly early on boot for
other parts of the code (e.g: biuctrl.c), so split the initialization
between an early_init() and an arch_initcall() which allows us to do
that.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
In order to achieve expected MCP bus throughput on 3 particular chips:
7268, 7271 and 7278, do the appropriate programming of the MCP
interface: increase number of MCP write credits, turn on write-back
throttling when present.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Add definitions for B53 systems register: CPU_MCP_FLOW_REG and
CPU_WRITEBACK_CTRL_REG. These register will be saved and restored
accordingly.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
In preparation for saving/restoring additional registers required on
some newer platforms (7268, 7271, 7278), migrate the code to use enums
and helper functions to access registers.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
On Broadcom Brahma-B53 CPUs, the CPU_CREDIT_REG offset got moved to
0x0b0 instead of 0x184, correct this such that we correcty
enable/disable write-pairing for these chips.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
In preparation for fixing and changing values in the CPU_CREDIT_REG
register for B53-based systems, make the offset parameterized.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Drivers that needs to communicate with a remote QMI service all has to
perform the operations of discovering the service, encoding and decoding
the messages and operate the socket. This introduces an abstraction for
these common operations, reducing most of the duplication in such cases.
Acked-by: Chris Lew <clew@codeaurora.org>
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Add the helper library for encoding and decoding QMI encoded messages.
The implementation is taken from lib/qmi_encdec.c of the Qualcomm kernel
(msm-3.18).
Modifications has been made to the public API, source buffers has been
made const and the debug-logging part was omitted, for now.
Acked-by: Chris Lew <clew@codeaurora.org>
Tested-by: Chris Lew <clew@codeaurora.org>
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Attempt to acquire the APCS IPC through the mailbox framework and fall
back to the old syscon based approach, to allow us to move away from
using the syscon.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
This change resolves a new compile-time warning
when built as a loadable module:
WARNING: modpost: missing MODULE_LICENSE() in drivers/soc/qcom/rmtfs_mem.o
see include/linux/module.h for more information
This adds the license as "GPL v2", which matches the header of the file.
MODULE_DESCRIPTION and MODULE_AUTHOR are also added.
Signed-off-by: Jesse Chan <jc@linux.com>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Fix child-node lookup during probe, which ended up searching the whole
device tree depth-first starting at the parent rather than just matching
on its children.
Note that the original premature free of the parent node has already
been fixed separately.
Also note that this pattern of looking up the first child node with a
given property is rare enough that a generic helper is probably not
warranted.
Fixes: c97c4090ff ("soc: qcom: smsm: Add driver for Qualcomm SMSM")
Fixes: 3e8b554114 ("soc: qcom: smsm: fix of_node refcnting problem")
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Rob Clark <robdclark@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
If an R-Car SYSC slave device is part of the CPG/MSTP or CPG/MSSR Clock
Domain and to be used as a wakeup source, it must be kept active during
system suspend.
Currently this is handled in device-specific drivers by explicitly
increasing the use count of the module clock when the device is
configured as a wakeup source. However, the proper way to prevent the
device from being stopped is to inform this requirement to the genpd
core, by setting the GENPD_FLAG_ACTIVE_WAKEUP flag.
Note that this will only affect devices configured as wakeup sources.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
If source string longer than max, kstrndup will alloc max+1 space.
So, we should make sure the result will not over limit.
Signed-off-by: Ma Shimiao <mashimiao.fnst@cn.fujitsu.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Move Tegra186 support to the consolidated PMC driver to reduce some of
the duplication and also gain I/O pad functionality on the new SoC as a
side-effect.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Parameterize some aspects of the driver in preparation for Tegra186 PMC
support. Initially the Tegra186 driver had been split off into an extra
driver, but it turns out the backwards-compatibility break isn't as bad
as originally assumed, so with a little parameterization the same code
can be used to keep supporting all SoC generations.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The register region containing chip ID information has been relocated in
Tegra186 and changed in backwards-incompatible ways. Add a compatible
string to allow the driver to make the distinction.
Signed-off-by: Thierry Reding <treding@nvidia.com>
If the FUSE registers are accessed but the region is not mapped, warn
and return 0. This potentially catches hard to diagnose bugs because the
accesses happen before any kernel log output.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The tegra_read_chipid() function can be called from places other than
tegra_get_chip_id(), so the check for a valid mapping of the MISC
registers needs to be moved to tegra_read_chipid() to catch all
potential accesses.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Tegra210 and Tegra186 are mostly compatible from a fuses point of view.
However, speedo support is implemented in the BPMP firmware, hence the
implementation needs to be skipped in the fuses driver.
Signed-off-by: Timo Alho <talho@nvidia.com>
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
[treding@nvidia.com: reword commit message]
Signed-off-by: Thierry Reding <treding@nvidia.com>
This patch is to add compatible strings "fsl,ls1021a-dcfg" and
"fsl,ls1043a-dcfg" into device match table of GUTS driver.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
I've noticed the following message while booting a S905X based board:
soc soc0: Amlogic Meson GXL (S905D) Revision 21:82 (b:2) Detected
The S905D string is obviously wrong. The vendor code does:
...
ver = (readl(assist_hw_rev) >> 8) & 0xff;
meson_cpu_version[MESON_CPU_VERSION_LVL_MINOR] = ver;
ver = (readl(assist_hw_rev) >> 16) & 0xff;
meson_cpu_version[MESON_CPU_VERSION_LVL_PACK] = ver;
...
while the current code does:
...
...
This means that the current mainline code has package id and minor
version reversed.
Fixes: a9daaba296 ("soc: Add Amlogic SoC Information driver")
Signed-off-by: Arnaud Patard <apatard@hupstream.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
The Product Register of R-Car M3-W ES1.1 incorrectly identifies the SoC
revision as ES2.0. Add a workaround to fix this.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
This branch contains platform-related driver updates for ARM and ARM64,
these are the areas that bring the changes:
New drivers:
- Driver support for Renesas R-Car V3M (R8A77970)
- Power management support for Amlogic GX
- A new driver for the Tegra BPMP thermal sensor
- A new bus driver for Technologic Systems NBUS
Changes for subsystems that prefer to merge through arm-soc:
- The usual updates for reset controller drivers from Philipp Zabel,
with five added drivers for SoCs in the arc, meson, socfpa, uniphier
and mediatek families.
- Updates to the ARM SCPI and PSCI frameworks, from Sudeep Holla,
Heiner Kallweit and Lorenzo Pieralisi.
Changes specific to some ARM-based SoC
- The Freescale/NXP DPAA QBMan drivers from PowerPC can now work
on ARM as well.
- Several changes for power management on Broadcom SoCs
- Various improvements on Qualcomm, Broadcom, Amlogic, Atmel, Mediatek
- Minor Cleanups for Samsung, TI OMAP SoCs
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJaDggbAAoJEGCrR//JCVInIeQQAN1MDyO1UaWiFYnbkVOgzFcj
dqbFOc41DBE/90JoBWE8kR/rjyF83OqztiaYpx9viu2qMMBZVcOwxhCUthWK59c/
IujYdw4zGevLscF+jdrLbXgk97nfaWebsHyTAF307WAdZVJxiVGGzQEcgm71d6Zp
CXjLiUii4winHUMK9FLRY2st0HKAevXhuvZJVV432+sTg3p7fGVilYeGOL5G62WO
zQfCisqzC5q677kGGyUlPRGlHWMPkllsTTnfXcmV/FUiGyVa3lUWY5sEu+wCl96O
U1ffPENeNj/A/4fa1dbErtbiNnC2z/+jf+Dg7Cn8w/dPk4Suf0ppjP8RqIGyxmDl
Wm/UxbwDClxaeF4GSaYh2yKgGRJMH5N87bJnZRINE5ccGiol8Ww/34bFG0xNnfyh
jSAFAc318AFG62WD4lvqWc7LSpzOYxp/MNqIFXKN692St/MJLkx8/q0nTwY1qPY0
3SELz9II3hz+3MfDRqtRi7hZpkgHgQ+UG7S5+Xhmqrl309GOEldCjPVJhhXxWoxK
ZPtZOuyYvGhIC+YAnHaN6lUjADIdNJZHwbuXFImx85oKHVofoxHbcni5vk8Uu7z1
sQNYOtdDGaPG/2u9RJdJlPg/jIgLKxxt/Xm9TYVawpZ5hFANhBTtIq5ExCRAil68
j9sMOrpZ1DzCQyR7zN2v
=qDhq
-----END PGP SIGNATURE-----
Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC driver updates from Arnd Bergmann:
"This branch contains platform-related driver updates for ARM and
ARM64, these are the areas that bring the changes:
New drivers:
- driver support for Renesas R-Car V3M (R8A77970)
- power management support for Amlogic GX
- a new driver for the Tegra BPMP thermal sensor
- a new bus driver for Technologic Systems NBUS
Changes for subsystems that prefer to merge through arm-soc:
- the usual updates for reset controller drivers from Philipp Zabel,
with five added drivers for SoCs in the arc, meson, socfpa,
uniphier and mediatek families
- updates to the ARM SCPI and PSCI frameworks, from Sudeep Holla,
Heiner Kallweit and Lorenzo Pieralisi
Changes specific to some ARM-based SoC
- the Freescale/NXP DPAA QBMan drivers from PowerPC can now work on
ARM as well
- several changes for power management on Broadcom SoCs
- various improvements on Qualcomm, Broadcom, Amlogic, Atmel,
Mediatek
- minor Cleanups for Samsung, TI OMAP SoCs"
[ NOTE! This doesn't work without the previous ARM SoC device-tree pull,
because the R8A77970 driver is missing a header file that came from
that pull.
The fact that this got merged afterwards only fixes it at this point,
and bisection of that driver will fail if/when you walk into the
history of that driver. - Linus ]
* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (96 commits)
soc: amlogic: meson-gx-pwrc-vpu: fix power-off when powered by bootloader
bus: add driver for the Technologic Systems NBUS
memory: omap-gpmc: Remove deprecated gpmc_update_nand_reg()
soc: qcom: remove unused label
soc: amlogic: gx pm domain: add PM and OF dependencies
drivers/firmware: psci_checker: Add missing destroy_timer_on_stack()
dt-bindings: power: add amlogic meson power domain bindings
soc: amlogic: add Meson GX VPU Domains driver
soc: qcom: Remote filesystem memory driver
dt-binding: soc: qcom: Add binding for rmtfs memory
of: reserved_mem: Accessor for acquiring reserved_mem
of/platform: Generalize /reserved-memory handling
soc: mediatek: pwrap: fix fatal compiler error
soc: mediatek: pwrap: fix compiler errors
arm64: mediatek: cleanup message for platform selection
soc: Allow test-building of MediaTek drivers
soc: mediatek: place Kconfig for all SoC drivers under menu
soc: mediatek: pwrap: add support for MT7622 SoC
soc: mediatek: pwrap: add common way for setup CS timing extenstion
soc: mediatek: pwrap: add MediaTek MT6380 as one slave of pwrap
..
Here is the big set of USB and PHY driver updates for 4.15-rc1.
There is the usual amount of gadget and xhci driver updates, along with
phy and chipidea enhancements. There's also a lot of SPDX tags and
license boilerplate cleanups as well, which provide some churn in the
diffstat.
Other major thing is the typec code that moved out of staging and into
the "real" part of the drivers/usb/ tree, which was nice to see happen.
All of these have been in linux-next with no reported issues for a
while.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWgm/Vw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yktXwCdGgpInfOEvOGFd83EPDL7a1ncyc4AoM5wI8yl
1CeLipqVIN3IsMMJptvb
=zvDI
-----END PGP SIGNATURE-----
Merge tag 'usb-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB/PHY updates from Greg KH:
"Here is the big set of USB and PHY driver updates for 4.15-rc1.
There is the usual amount of gadget and xhci driver updates, along
with phy and chipidea enhancements. There's also a lot of SPDX tags
and license boilerplate cleanups as well, which provide some churn in
the diffstat.
Other major thing is the typec code that moved out of staging and into
the "real" part of the drivers/usb/ tree, which was nice to see
happen.
All of these have been in linux-next with no reported issues for a
while"
* tag 'usb-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (263 commits)
usb: gadget: f_fs: Fix use-after-free in ffs_free_inst
USB: usbfs: compute urb->actual_length for isochronous
usb: core: message: remember to reset 'ret' to 0 when necessary
USB: typec: Remove remaining redundant license text
USB: typec: add SPDX identifiers to some files
USB: renesas_usbhs: rcar?.h: add SPDX tags
USB: chipidea: ci_hdrc_tegra.c: add SPDX line
USB: host: xhci-debugfs: add SPDX lines
USB: add SPDX identifiers to all remaining Makefiles
usb: host: isp1362-hcd: remove a couple of redundant assignments
USB: adutux: remove redundant variable minor
usb: core: add a new usb_get_ptm_status() helper
usb: core: add a 'type' parameter to usb_get_status()
usb: core: introduce a new usb_get_std_status() helper
usb: core: rename usb_get_status() 'type' argument to 'recip'
usb: core: add Status Type definitions
USB: gadget: Remove redundant license text
USB: gadget: function: Remove redundant license text
USB: gadget: udc: Remove redundant license text
USB: gadget: legacy: Remove redundant license text
...
* pm-domains:
PM / Domains: Fix genpd to deal with drivers returning 1 from ->prepare()
PM / domains: Rework governor code to be more consistent
PM / Domains: Remove gpd_dev_ops.active_wakeup() callback
soc: rockchip: power-domain: Use GENPD_FLAG_ACTIVE_WAKEUP
soc: mediatek: Use GENPD_FLAG_ACTIVE_WAKEUP
ARM: shmobile: pm-rmobile: Use GENPD_FLAG_ACTIVE_WAKEUP
PM / Domains: Allow genpd users to specify default active wakeup behavior
PM / Domains: Add support to select performance-state of domains
PM / Domains: Rename genpd internals from pm_genpd_* to genpd_*
In the case the VPU power domain has been powered on by the bootloader
and no driver are attached to this power domain, the genpd will power it
off after a certain amount of time, but the clocks hasn't been enabled
by the kernel itself and the power-off will trigger some faults.
This patch enable the clocks to have a coherent state for an eventual
poweroff and switches to the pm_domain_always_on_gov governor.
Fixes: 75fcb5ca4b ("soc: amlogic: add Meson GX VPU Domains driver")
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Set the newly introduced GENPD_FLAG_ACTIVE_WAKEUP, which allows to
remove the driver's own flag-based callback.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Set the newly introduced GENPD_FLAG_ACTIVE_WAKEUP, which allows to
remove the driver's own flag-based callback.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The newly added driver comes with a harmless warning:
drivers/soc/qcom/rmtfs_mem.c: In function 'qcom_rmtfs_mem_probe':
drivers/soc/qcom/rmtfs_mem.c:211:1: error: label 'remove_cdev' defined but not used [-Werror=unused-label]
This removes the unused label to avoid the warning.
Fixes: 702baebb8e00 ("soc: qcom: Remote filesystem memory driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The new driver introduces harmless warnings:
warning: (PM_RMOBILE && ARCH_RCAR_GEN1 && ARCH_RCAR_GEN2 && ARCH_R7S72100 && MESON_GX_PM_DOMAINS) selects PM_GENERIC_DOMAINS which has unmet direct dependencies (PM)
warning: (MESON_GX_PM_DOMAINS) selects PM_GENERIC_DOMAINS_OF which has unmet direct dependencies (PM_GENERIC_DOMAINS && OF)
This adds CONFIG_OF and CONFIG_PM dependencies to ensure it
will only be enabled in valid configurations.
Fixes: 75fcb5ca4b ("soc: amlogic: add Meson GX VPU Domains driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- add mt7622 support to pwrap
- test build all mediatek soc drivers
- fix compiler issues
- clean up Kconfig description
-----BEGIN PGP SIGNATURE-----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=ZWf/
-----END PGP SIGNATURE-----
Merge tag 'v4.14-next-soc' of https://github.com/mbgg/linux-mediatek into next/drivers
Pull "Mediatek: soc driver updates for v4.15" from Matthias Brugger:
- add 32 bit read/write support to pwrap
- add mt7622 support to pwrap
- test build all mediatek soc drivers
- fix compiler issues
- clean up Kconfig description
* tag 'v4.14-next-soc' of https://github.com/mbgg/linux-mediatek:
soc: mediatek: pwrap: fix fatal compiler error
soc: mediatek: pwrap: fix compiler errors
arm64: mediatek: cleanup message for platform selection
soc: Allow test-building of MediaTek drivers
soc: mediatek: place Kconfig for all SoC drivers under menu
soc: mediatek: pwrap: add support for MT7622 SoC
soc: mediatek: pwrap: add common way for setup CS timing extenstion
soc: mediatek: pwrap: add MediaTek MT6380 as one slave of pwrap
soc: mediatek: pwrap: refactor pwrap_init for the various PMIC types
soc: mediatek: pwrap: add pwrap_write32 for writing in 32-bit mode
soc: mediatek: pwrap: add pwrap_read32 for reading in 32-bit mode
dt-bindings: arm: mediatek: add MT7622 string to the PMIC wrapper doc
ARM: mediatek: Cocci spatch "of_table"
soc: mediatek: pwrap: fixup warnings from coding style
- add SoC ids for the sama5d2 SiPs
- Improve the AT91 maintainers entry
-----BEGIN PGP SIGNATURE-----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=rOv0
-----END PGP SIGNATURE-----
Merge tag 'at91-ab-4.15-soc' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/abelloni/linux into next/drivers
Pull "soc for 4.15" from Alexandre Belloni:
- add SoC ids for the sama5d2 SiPs
- Improve the AT91 maintainers entry
* tag 'at91-ab-4.15-soc' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
MAINTAINERS: Add SoC drivers to AT91 entry
drivers: soc: atmel: Add basic support for new sama5d2 SiPs
- add SoC info driver for 32-bit Amlogic SoCs
-----BEGIN PGP SIGNATURE-----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=rzEd
-----END PGP SIGNATURE-----
Merge tag 'amlogic-drivers' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into next/drivers
Pull "Amlogic drivers for v4.15" from Kevin Hilman:
- add SoC info driver for 32-bit Amlogic SoCs
* tag 'amlogic-drivers' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
soc: amlogic: Add Meson6/Meson8/Meson8b/Meson8m2 SoC Information driver
Contains a fix to the generic power domain driver to properly report
errors propagated from BPMP.
-----BEGIN PGP SIGNATURE-----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=tkiA
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-4.15-soc' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/drivers
Pull "soc/tegra: Changes for v4.15-rc1" from Thierry Reding:
Contains a fix to the generic power domain driver to properly report
errors propagated from BPMP.
* tag 'tegra-for-4.15-soc' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
soc/tegra: bpmp: Check BPMP response return code
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Video Processing Unit needs a specific Power Domain powering scheme
this driver handles this as a PM Power Domain driver.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
The Qualcomm remote file system protocol is used by certain remoteprocs,
in particular the modem, to read and write persistent storage in
platforms where only the application CPU has physical storage access.
The protocol is based on a set of QMI-encoded control-messages and a
shared memory buffer for exchaning the data. This driver implements the
latter, providing the user space service access to the carved out chunk
of memory.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
When adding the MT6380 compatible, the sentinel for of_device_id was
deleted, which leades to the following compiler error:
FATAL: drivers/soc/mediatek/mtk-pmic-wrap: struct of_device_id is not terminated with a NULL entry!
Fix this by adding the sentinel again.
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
When compiling using sparse, we got the following error:
drivers/soc/mediatek/mtk-pmic-wrap.c:686:25: error: dubious one-bit signed bitfield
Changing the data type to unsigned fixes this.
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
This adds the DPAA QBMan support for ARM SoCs and a few minor fixes/updates.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=BpKO
-----END PGP SIGNATURE-----
Merge tag 'soc-fsl-for-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux into next/drivers
Pull "FSL/NXP ARM SoC drivers updates for 4.14" from Li Yang:
This adds the DPAA QBMan support for ARM SoCs and a few minor fixes/updates.
This pull request includes updates to the QMAN/BMAN drivers to make
them work on the arm/arm64 architectures in addition to the power
architecture and a few minor update/bug-fix to the soc/fsl drivers.
We got the Reviewed-by from Catalin on the ARM architecture side.
DPAA (Data Path Acceleration Architecture) is a set of hardware
components used on some FSL/NXP QorIQ Networking SoCs, it provides the
infrastructure to support simplified sharing of networking interfaces
and accelerators by multiple CPU cores, and the accelerators
themselves. The QMan(Queue Manager) and BMan(Buffer Manager) are
infrastructural components within the DPAA framework. They are used to
manage queues and buffers for various I/O interfaces, hardware
accelerators.
* tag 'soc-fsl-for-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux:
soc/fsl/qbman: Enable FSL_LAYERSCAPE config on ARM
soc/fsl/qbman: Add missing headers on ARM
soc/fsl/qbman: different register offsets on ARM
soc/fsl/qbman: add QMAN_REV32
soc/fsl/qbman: Rework portal mapping calls for ARM/PPC
soc/fsl/qbman: Fix ARM32 typo
soc/fsl/qbman: Drop L1_CACHE_BYTES compile time check
soc/fsl/qbman: Drop set/clear_bits usage
dt-bindings: soc/fsl: Update reserved memory binding for QBMan
soc/fsl/qbman: Use shared-dma-pool for QMan private memory allocations
soc/fsl/qbman: Use shared-dma-pool for BMan private memory allocations
soc/fsl/qbman: Add common routine for QBMan private allocations
soc/fsl/guts: Add compatible string for LS1088
soc/fsl/qman: Sleep instead of stuck hacking jiffies
* Add SCM firmware APIs for download mode and secure IO service
* Add SMEM support for cached entries
* Add SMEM support for global partition, dynamic item limit, and more hosts
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=9wWp
-----END PGP SIGNATURE-----
Merge tag 'qcom-drivers-for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/drivers
Pull "Qualcomm ARM Based Driver Updates for v4.15" from Andy Gross:
* Add SCM firmware APIs for download mode and secure IO service
* Add SMEM support for cached entries
* Add SMEM support for global partition, dynamic item limit, and more hosts
* tag 'qcom-drivers-for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux:
firmware: qcom: scm: Expose download-mode control
firmware: qcom: scm: Expose secure IO service
soc: qcom: smem: Increase the number of hosts
soc: qcom: smem: Support dynamic item limit
soc: qcom: smem: Support global partition
soc: qcom: smem: Read version from the smem header
soc: qcom: smem: Use le32_to_cpu for comparison
soc: qcom: smem: Support getting cached entries
soc: qcom: smem: Rename "uncached" accessors
Remove of Exynos4212 related dead code (no more support for this SoC).
-----BEGIN PGP SIGNATURE-----
iQIcBAABCAAGBQJZ4xBvAAoJEME3ZuaGi4PXSroP/inI0fpKpo9U3ciCTOvYiO5y
zu6TxJP7xUu43vFBLdTA7FOaddSHnpvAGQ9hS4HXs1F5/+paeqhqJ+U6BPwrC1na
VJPEmdTL3wrp46V9AGoaMZBlLFP5zjIgAvez1QhgOd8GiveS6o9ZDE4N7MidB1ob
SXGfmKw4yVJQ6TrCKUcx8M1yyov9125d8GVWNA2WP67UR/vtSOdH7rMLwh1Mvoi+
eJpABOx9ZQfzyNxcFvBjr2wCMkqTb6muPiTl0UIzVZ16aya8Dx4UznEjMCgmdkQX
ZtaZI+CJahpnzzi9+EKJzBsm57Q4jWV4TJujLrjZ59sI3zsKkNs9R7L8gwQdzYKa
slhCXNLBG2/g3DQ+Gl8nM3vT/DJgNlcEvStmGU5SoQuYBr1w75XpK/kDKZs25zxF
Tjz3mzXj1eg4aZT/Ier1jV05ej26AvwG0AJfgvKFl3L3kBG5Zi32mZqhh0aD93Fg
v832J/BZQ3+Cqha7U1uW1ESBFftRiBg4Y0yfI1WaD//Yu5PlNDnHd098bPeXdvCG
2tWQ4wzSjKUX9ZzTIhLgGpv6T+vkP/nvW9ufDMUUf7SVWMmIjE4q0LCwNk4zRxGp
YvcMkn9xuXyG+DRjK/dyz85qV1AbtGobeImL2G+6SEL8XVnW3yTqxhJdaAQWjFH/
8DwxWwhWs/AvVptTKeBw
=7Lj1
-----END PGP SIGNATURE-----
Merge tag 'samsung-drivers-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/drivers
Pull "Samsung soc drivers changes for v4.15" from Krzysztof Kozłowski:
Remove of Exynos4212 related dead code (no more support for this SoC).
* tag 'samsung-drivers-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
soc: samsung: Remove Exynos4212 related dead code
Add basic support for R-Car V3M (R8A77970) SoC.
Sergei Shtylyov says:
* Add support for R-Car V3M (R8A77970) SoC power areas to the R-Car SYSC
driver
* Add support for identifying the R-Car V3M (R8A77970) SoC
* Add support for R-Car V3M (R8A77970) to the R-Car RST driver -- this
driver is needed for the clock driver to work
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=5yPj
-----END PGP SIGNATURE-----
Merge tag 'renesas-drivers-for-v4.15' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/drivers
Pull "Renesas ARM Based SoC Drivers Updates for v4.15" from Simon Horman:
Add basic support for R-Car V3M (R8A77970) SoC.
Sergei Shtylyov says:
* Add support for R-Car V3M (R8A77970) SoC power areas to the R-Car SYSC
driver
* Add support for identifying the R-Car V3M (R8A77970) SoC
* Add support for R-Car V3M (R8A77970) to the R-Car RST driver -- this
driver is needed for the clock driver to work
* tag 'renesas-drivers-for-v4.15' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
soc: renesas: rcar-sysc: add R8A77970 support
soc: renesas: identify R-Car V3M
soc: renesas: rcar-rst: add R8A77970 support
The COMPILE_TEST alternative dependency allows test-building the
drivers but only as long as the build system itself will look into
the directory where the drivers reside.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Sean Wang <sean.wang@mediatek.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Acked-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Add cleanup for placing all Kconfig for all MediaTek SoC drivers under
the independent menu as other SoCs vendor usually did. Since the menu
would be shown depending on "ARCH_MEDIATEK || COMPILE_TEST" selected and
MTK_PMIC_WRAP is still safe compiling with the case of "COMPILE_TEST"
only, the superfluous dependency for those items under the menu also is
also being removed for the sake of simplicity.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Add the registers, callbacks and data structures required to make the
PMIC wrapper work on MT7622.
Signed-off-by: Chenglin Xu <chenglin.xu@mediatek.com>
Signed-off-by: Chen Zhong <chen.zhong@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Multiple platforms would always use their own way handling CS timing
extension on the bus which leads to a little bit code duplication.
Therefore, the patch groups the similar logic to handle CS timing
extension into the common function which allows the following SoCs
have more reusability for configing CS timing.
Signed-off-by: Chenglin Xu <chenglin.xu@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Add MediaTek MT6380 regulator becoming one of PMIC wrapper slave
and also add extra new regmap_config of 32-bit mode for MT6380
since old regmap_config of 16-bit mode can't be fit into the need.
Signed-off-by: Chenglin Xu <chenglin.xu@mediatek.com>
Signed-off-by: Chen Zhong <chen.zhong@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
pwrap initialization is highly associated with the base SoC and the
target PMICs, so slight refactorization is made here for allowing
pwrap_init to run on those PMICs with different capability from the
previous MediaTek PMICs and the determination for the enablement of the
pwrap capability depending on PMIC type. Apart from this, the patch
makes the driver more extensible especially when more PMICs join into
the pwrap driver.
Signed-off-by: Chenglin Xu <chenglin.xu@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Some regulators such as MediaTek MT6380 also has to be written in
32-bit mode. So the patch adds pwrap_write32, rename old pwrap_write
into pwrap_write16 and one additional function pointer is introduced
for increasing flexibility allowing the determination which mode is
used by the pwrap slave detection through device tree.
Signed-off-by: Chenglin Xu <chenglin.xu@mediatek.com>
Signed-off-by: Chen Zhong <chen.zhong@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Some regulators such as MediaTek MT6380 has to be read in 32-bit mode.
So the patch adds pwrap_read32, rename old pwrap_read into pwrap_read16
and one function pointer is introduced for increasing flexibility allowing
the determination which mode is used by the pwrap slave detection through
device tree.
Signed-off-by: Chenglin Xu <chenglin.xu@mediatek.com>
Signed-off-by: Chen Zhong <chen.zhong@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Add checks for the return code in BPMP response messages.
Signed-off-by: Timo Alho <talho@nvidia.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Increase the maximum number of hosts in a system to 10.
Signed-off-by: Chris Lew <clew@codeaurora.org>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
In V12 SMEM, SBL writes SMEM parameter information after the TOC. Use
the SBL provided item count as the max item number.
Signed-off-by: Chris Lew <clew@codeaurora.org>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
SMEM V12 creates a global partition to allocate global smem items from
instead of a global heap. The global partition has the same structure as
a private partition.
Signed-off-by: Chris Lew <clew@codeaurora.org>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
The SMEM header structure includes the version information. Read the
version directly from the header instead of getting an item from the
global heap.
Signed-off-by: Chris Lew <clew@codeaurora.org>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Endianness can vary in the system, add le32_to_cpu when comparing
partition sizes from smem.
Signed-off-by: Chris Lew <clew@codeaurora.org>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
On msm8996 cached SMEM items are used for storing the GLINK FIFOs, so
for items not found in the uncached list we need to also search the
cased list for these items.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
In preparation for adding accessors for "cached" entries rename the
"uncached" accessors. Also rename "first" cached entry to "last", as
the cached list grows backwards.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
fixup those warnings such as lines over 80 words and parenthesis
alignment which would be complained by checkpatch.pl.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Support for Exynos4212 SoCs has been removed by commit bca9085e0a ("ARM:
dts: exynos: remove Exynos4212 support (dead code)"), so there is no need
to keep remaining dead code related to this SoC version.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Amlogic SoCs have an information register which contains the SoC type
and revision information.
This patchs adds support for decoding those registers and exposing the
resulting information via the SoC bus infrastructure.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Add Product ID and Family ID helper functions for brcmstb soc.
Signed-off-by: Al Cooper <alcooperx@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
This commit adds support for the Broadcom STB S2/S3/S5 suspend
states on MIPS based SoCs.
This requires quite a lot of code in order to deal with the
different HW blocks that need to be quiesced during suspend:
- DDR PHY
- DDR memory controller and arbiter
- control processor
The final steps of the suspend execute in cache and there is is a little
bit of assembly code in order to shut down the DDR PHY PLL and then go
into a wait loop until a wake-up even occurs. Conversely the resume part
involves waiting for the DDR PHY PLL to come back up and resume
executions where we left.
Signed-off-by: Justin Chen <justinpopo6@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
This commit adds support for the Broadcom STB S2/S3/S5 suspend states on
ARM based SoCs.
This requires quite a lot of code in order to deal with the different HW
blocks that need to be quiesced during suspend:
- DDR PHY SHIM
- DDR memory controller and sequencer
- control processor
The final steps of the suspend execute in an on-chip SRAM and there is a
little bit of assembly code in order to shut down the DDR PHY PLL and
then go into a wfi loop until a wake-up even occurs. Conversely the
resume part involves waiting for the DDR PHY PLL to come back up and
resume executions where we left.
For S3, because of our memory hashing (actual hashing code not included
for simplicity, and is bypassed) we need to relocate the writable
variables (stack) into SRAM shortly before suspending in order to leave
the DRAM untouched and create a reliable hash of its contents.
This code has been contributed by Brian Norris initially and has been
incrementally fixed and updated to support new chips by a lot of people.
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Markus Mayer <mmayer@broadcom.com>
Signed-off-by: Justin Chen <justinpopo6@gmail.com>
Signed-off-by: Gareth Powell <gpowell@broadcom.com>
Signed-off-by: Doug Berger <opendmb@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
[Stuart: changed to use ARCH_LAYERSCAPE]
Signed-off-by: Stuart Yoder <stuart.yoder@nxp.com>
Signed-off-by: Roy Pledge <roy.pledge@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Unlike PPC builds, ARM builds need following headers
explicitly:
+#include <linux/io.h> for ioread32be()
+#include <linux/delay.h> for udelay()
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: Roy Pledge <roy.pledge@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Add revision 3.2 of the QBMan block. This is the version
for LS1043A and LS1046A SoCs.
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: Roy Pledge <roy.pledge@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Rework portal mapping for PPC and ARM. The PPC devices require a
cacheable coherent mapping while ARM will work with a non-cachable/write
combine mapping. This also eliminates the need for manual cache
flushes on ARM. This also fixes the code so sparse checking is clean.
Signed-off-by: Roy Pledge <roy.pledge@nxp.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
The Kconfig symbol for 32bit ARM is 'ARM', not 'ARM32'.
Signed-off-by: Valentin Rothberg <valentinrothberg@gmail.com>
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: Roy Pledge <roy.pledge@nxp.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Not relevant and arch dependent. Overkill for PPC.
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: Roy Pledge <roy.pledge@nxp.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Replace PPC specific set/clear_bits API with standard
bit twiddling so driver is portalable outside PPC.
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: Roy Pledge <roy.pledge@nxp.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Use the shared-memory-pool mechanism for frame queue descriptor and
packed frame descriptor record area allocations.
Signed-off-by: Roy Pledge <roy.pledge@nxp.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Use the shared-memory-pool mechanism for free buffer proxy record
area allocation.
Signed-off-by: Roy Pledge <roy.pledge@nxp.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
The QBMan device uses several memory regions to manage frame
queues and buffers. Add a common routine for extracting and
initializing these reserved memory areas.
Signed-off-by: Roy Pledge <roy.pledge@nxp.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Adding compatible string "ls1088a-dcfg" so that
guts driver can be init for ls1088
Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com>
Signed-off-by: Amrita Kumari <amrita.kumari@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Use msleep() instead of stucking with long delay will be more efficient.
Signed-off-by: Karim Eshapa <karim.eshapa@gmail.com>
Acked-by: Scott Wood <oss@buserror.net>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Add support for R-Car V3M (R8A77970) SoC power areas to the R-Car SYSC
driver.
Based on the original (and large) patch by Daisuke Matsushita
<daisuke.matsushita.ns@hitachi.com>.
Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Add support for identifying the R-Car V3M (R8A77970) SoC.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Add support for R-Car V3M (R8A77970) to the R-Car RST driver -- this driver
is needed for the clock driver to work.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Add basic support for new sama5d2 System in a Package chips.
Signed-off-by: Cristian Birsan <cristian.birsan@microchip.com>
[claudiu.beznea@microchip.com: use MiB instead of MB]
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Pull MIPS updates from Ralf Baechle:
"This is the main pull request for 4.14 for MIPS; below a summary of
the non-merge commits:
CM:
- Rename mips_cm_base to mips_gcr_base
- Specify register size when generating accessors
- Use BIT/GENMASK for register fields, order & drop shifts
- Add cluster & block args to mips_cm_lock_other()
CPC:
- Use common CPS accessor generation macros
- Use BIT/GENMASK for register fields, order & drop shifts
- Introduce register modify (set/clear/change) accessors
- Use change_*, set_* & clear_* where appropriate
- Add CM/CPC 3.5 register definitions
- Use GlobalNumber macros rather than magic numbers
- Have asm/mips-cps.h include CM & CPC headers
- Cluster support for topology functions
- Detect CPUs in secondary clusters
CPS:
- Read GIC_VL_IDENT directly, not via irqchip driver
DMA:
- Consolidate coherent and non-coherent dma_alloc code
- Don't use dma_cache_sync to implement fd_cacheflush
FPU emulation / FP assist code:
- Another series of 14 commits fixing corner cases such as NaN
propgagation and other special input values.
- Zero bits 32-63 of the result for a CLASS.D instruction.
- Enhanced statics via debugfs
- Do not use bools for arithmetic. GCC 7.1 moans about this.
- Correct user fault_addr type
Generic MIPS:
- Enhancement of stack backtraces
- Cleanup from non-existing options
- Handle non word sized instructions when examining frame
- Fix detection and decoding of ADDIUSP instruction
- Fix decoding of SWSP16 instruction
- Refactor handling of stack pointer in get_frame_info
- Remove unreachable code from force_fcr31_sig()
- Convert to using %pOF instead of full_name
- Remove the R6000 support.
- Move FP code from *_switch.S to *_fpu.S
- Remove unused ST_OFF from r2300_switch.S
- Allow platform to specify multiple its.S files
- Add #includes to various files to ensure code builds reliable and
without warning..
- Remove __invalidate_kernel_vmap_range
- Remove plat_timer_setup
- Declare various variables & functions static
- Abstract CPU core & VP(E) ID access through accessor functions
- Store core & VP IDs in GlobalNumber-style variable
- Unify checks for sibling CPUs
- Add CPU cluster number accessors
- Prevent direct use of generic_defconfig
- Make CONFIG_MIPS_MT_SMP default y
- Add __ioread64_copy
- Remove unnecessary inclusions of linux/irqchip/mips-gic.h
GIC:
- Introduce asm/mips-gic.h with accessor functions
- Use new GIC accessor functions in mips-gic-timer
- Remove counter access functions from irq-mips-gic.c
- Remove gic_read_local_vp_id() from irq-mips-gic.c
- Simplify shared interrupt pending/mask reads in irq-mips-gic.c
- Simplify gic_local_irq_domain_map() in irq-mips-gic.c
- Drop gic_(re)set_mask() functions in irq-mips-gic.c
- Remove gic_set_polarity(), gic_set_trigger(), gic_set_dual_edge(),
gic_map_to_pin() and gic_map_to_vpe() from irq-mips-gic.c.
- Convert remaining shared reg access, local int mask access and
remaining local reg access to new accessors
- Move GIC_LOCAL_INT_* to asm/mips-gic.h
- Remove GIC_CPU_INT* macros from irq-mips-gic.c
- Move various definitions to the driver
- Remove gic_get_usm_range()
- Remove __gic_irq_dispatch() forward declaration
- Remove gic_init()
- Use mips_gic_present() in place of gic_present and remove
gic_present
- Move gic_get_c0_*_int() to asm/mips-gic.h
- Remove linux/irqchip/mips-gic.h
- Inline __gic_init()
- Inline gic_basic_init()
- Make pcpu_masks a per-cpu variable
- Use pcpu_masks to avoid reading GIC_SH_MASK*
- Clean up mti, reserved-cpu-vectors handling
- Use cpumask_first_and() in gic_set_affinity()
- Let the core set struct irq_common_data affinity
microMIPS:
- Fix microMIPS stack unwinding on big endian systems
MIPS-GIC:
- SYNC after enabling GIC region
NUMA:
- Remove the unused parent_node() macro
R6:
- Constify r2_decoder_tables
- Add accessor & bit definitions for GlobalNumber
SMP:
- Constify smp ops
- Allow boot_secondary SMP op to return errors
VDSO:
- Drop gic_get_usm_range() usage
- Avoid use of linux/irqchip/mips-gic.h
Platform changes:
Alchemy:
- Add devboard machine type to cpuinfo
- update cpu feature overrides
- Threaded carddetect irqs for devboards
AR7:
- allow NULL clock for clk_get_rate
BCM63xx:
- Fix ENETDMA_6345_MAXBURST_REG offset
- Allow NULL clock for clk_get_rate
CI20:
- Enable GPIO and RTC drivers in defconfig
- Add ethernet and fixed-regulator nodes to DTS
Generic platform:
- Move Boston and NI 169445 FIT image source to their own files
- Include asm/bootinfo.h for plat_fdt_relocated()
- Include asm/time.h for get_c0_*_int()
- Include asm/bootinfo.h for plat_fdt_relocated()
- Include asm/time.h for get_c0_*_int()
- Allow filtering enabled boards by requirements
- Don't explicitly disable CONFIG_USB_SUPPORT
- Bump default NR_CPUS to 16
JZ4700:
- Probe the jz4740-rtc driver from devicetree
Lantiq:
- Drop check of boot select from the spi-falcon driver.
- Drop check of boot select from the lantiq-flash MTD driver.
- Access boot cause register in the watchdog driver through regmap
- Add device tree binding documentation for the watchdog driver
- Add docs for the RCU DT bindings.
- Convert the fpi bus driver to a platform_driver
- Remove ltq_reset_cause() and ltq_boot_select(
- Switch to a proper reset driver
- Switch to a new drivers/soc GPHY driver
- Add an USB PHY driver for the Lantiq SoCs using the RCU module
- Use of_platform_default_populate instead of __dt_register_buses
- Enable MFD_SYSCON to be able to use it for the RCU MFD
- Replace ltq_boot_select() with dummy implementation.
Loongson 2F:
- Allow NULL clock for clk_get_rate
Malta:
- Use new GIC accessor functions
NI 169445:
- Add support for NI 169445 board.
- Only include in 32r2el kernels
Octeon:
- Add support for watchdog of 78XX SOCs.
- Add support for watchdog of CN68XX SOCs.
- Expose support for mips32r1, mips32r2 and mips64r1
- Enable more drivers in config file
- Add support for accessing the boot vector.
- Remove old boot vector code from watchdog driver
- Define watchdog registers for 70xx, 73xx, 78xx, F75xx.
- Make CSR functions node aware.
- Allow access to CIU3 IRQ domains.
- Misc cleanups in the watchdog driver
Omega2+:
- New board, add support and defconfig
Pistachio:
- Enable Root FS on NFS in defconfig
Ralink:
- Add Mediatek MT7628A SoC
- Allow NULL clock for clk_get_rate
- Explicitly request exclusive reset control in the pci-mt7620 PCI driver.
SEAD3:
- Only include in 32 bit kernels by default
VoCore:
- Add VoCore as a vendor t0 dt-bindings
- Add defconfig file"
* '4.14-features' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (167 commits)
MIPS: Refactor handling of stack pointer in get_frame_info
MIPS: Stacktrace: Fix microMIPS stack unwinding on big endian systems
MIPS: microMIPS: Fix decoding of swsp16 instruction
MIPS: microMIPS: Fix decoding of addiusp instruction
MIPS: microMIPS: Fix detection of addiusp instruction
MIPS: Handle non word sized instructions when examining frame
MIPS: ralink: allow NULL clock for clk_get_rate
MIPS: Loongson 2F: allow NULL clock for clk_get_rate
MIPS: BCM63XX: allow NULL clock for clk_get_rate
MIPS: AR7: allow NULL clock for clk_get_rate
MIPS: BCM63XX: fix ENETDMA_6345_MAXBURST_REG offset
mips: Save all registers when saving the frame
MIPS: Add DWARF unwinding to assembly
MIPS: Make SAVE_SOME more standard
MIPS: Fix issues in backtraces
MIPS: jz4780: DTS: Probe the jz4740-rtc driver from devicetree
MIPS: Ci20: Enable RTC driver
watchdog: octeon-wdt: Add support for 78XX SOCs.
watchdog: octeon-wdt: Add support for cn68XX SOCs.
watchdog: octeon-wdt: File cleaning.
...
This branch contains platform-related driver updates for ARM and ARM64.
Among them:
- Reset driver updates:
+ New API for dealing with arrays of resets
+ Make unimplemented {de,}assert return success on shared resets
+ MSDKv1 driver
+ Removal of obsolete Gemini reset driver
+ Misc updates for sunxi and Uniphier
- SoC drivers:
+ Platform SoC driver registration on Tegra
+ Shuffle of Qualcomm drivers into a submenu
+ Allwinner A64 support for SRAM
+ Renesas R-Car R3 support
+ Power domains for Rockchip RK3366
- Misc updates and smaller fixes for TEE and memory driver subsystems
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=yBzS
-----END PGP SIGNATURE-----
Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC driver updates from Olof Johansson:
"This branch contains platform-related driver updates for ARM and ARM64.
Among them:
- Reset driver updates:
+ New API for dealing with arrays of resets
+ Make unimplemented {de,}assert return success on shared resets
+ MSDKv1 driver
+ Removal of obsolete Gemini reset driver
+ Misc updates for sunxi and Uniphier
- SoC drivers:
+ Platform SoC driver registration on Tegra
+ Shuffle of Qualcomm drivers into a submenu
+ Allwinner A64 support for SRAM
+ Renesas R-Car R3 support
+ Power domains for Rockchip RK3366
- Misc updates and smaller fixes for TEE and memory driver
subsystems"
* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (54 commits)
firmware: arm_scpi: fix endianness of dev_id in struct dev_pstate_set
soc/tegra: fuse: Add missing semi-colon
soc/tegra: Restrict SoC device registration to Tegra
drivers: soc: sunxi: add support for A64 and its SRAM C
drivers: soc: sunxi: add support for remapping func value to reg value
drivers: soc: sunxi: fix error processing on base address when claiming
dt-bindings: add binding for Allwinner A64 SRAM controller and SRAM C
bus: sunxi-rsb: Enable by default for ARM64
soc/tegra: Register SoC device
firmware: tegra: set drvdata earlier
memory: Convert to using %pOF instead of full_name
soc: Convert to using %pOF instead of full_name
bus: Convert to using %pOF instead of full_name
firmware: Convert to using %pOF instead of full_name
soc: mediatek: add SCPSYS power domain driver for MediaTek MT7622 SoC
soc: mediatek: add header files required for MT7622 SCPSYS dt-binding
soc: mediatek: reduce code duplication of scpsys_probe across all SoCs
dt-bindings: soc: update the binding document for SCPSYS on MediaTek MT7622 SoC
reset: uniphier: add analog amplifiers reset control
reset: uniphier: add video input subsystem reset control
...
This branch contains platform updates for 32- and 64-bit ARM,
including defconfig updates to enable new options, drivers and
platforms. There are also a few fixes and cleanups for some existing vendors.
Some of the things worth highlighting here are:
- Enabling new crypt drivers on arm64 defconfig
- QCOM IPQ8074 clocks and pinctrl drivers on arm64 defconfig
- Debug support enabled for Renesas r8a7743
- Various config updates for Renesas platforms (sound, USB, other drivers)
- Platform support (including SMP) for TI dra762
- OMAP cleanups: Move to use generic 8250 debug_ll, removal of stale DMA code
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=g8cF
-----END PGP SIGNATURE-----
Merge tag 'armsoc-platforms' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM/arm64 SoC platform updates from Olof Johansson: "This branch
contains platform updates for 32- and 64-bit ARM, including defconfig
updates to enable new options, drivers and platforms. There are also a
few fixes and cleanups for some existing vendors.
Some of the things worth highlighting here are:
- Enabling new crypt drivers on arm64 defconfig
- QCOM IPQ8074 clocks and pinctrl drivers on arm64 defconfig
- Debug support enabled for Renesas r8a7743
- Various config updates for Renesas platforms (sound, USB, other
drivers)
- Platform support (including SMP) for TI dra762
- OMAP cleanups: Move to use generic 8250 debug_ll, removal of stale
DMA code"
* tag 'armsoc-platforms' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (109 commits)
ARM: multi_v7_defconfig: make eSDHC driver built-in
arm64: defconfig: enable rockchip graphics
MAINTAINERS: Update Cavium ThunderX2 entry
ARM: config: aspeed: Add I2C, VUART, LPC Snoop
ARM: configs: aspeed: Update Aspeed G4 with VMSPLIT_2G
ARM: s3c24xx: Fix NAND ECC mode for mini2440 board
ARM: davinci_all_defconfig: enable tinydrm and ST7586
arm64: defconfig: Enable QCOM IPQ8074 clock and pinctrl
ARM: defconfig: tegra: Enable ChipIdea UDC driver
ARM: configs: Add Tegra I2S interfaces to multi_v7_defconfig
ARM: tegra: Add Tegra I2S interfaces to defconfig
ARM: tegra: Update default configuration for v4.13-rc1
MAINTAINERS: update ARM/ZTE entry
soc: versatile: remove unnecessary static in realview_soc_probe()
ARM: Convert to using %pOF instead of full_name
ARM: hisi: Fix typo in comment
ARM: multi_v7_defconfig: add CONFIG_BRCMSTB_THERMAL
arm64: defconfig: add CONFIG_BRCMSTB_THERMAL
arm64: defconfig: add recently added crypto drivers as modules
arm64: defconfig: enable CONFIG_UNIPHIER_WATCHDOG
...
This adds and improves remoteproc support for TI DA8xx/OMAP-L13x DSP, TI
Keystone 66AK2G DSP and iMX6SX/7D Cortex M4 coprocessors. It introduces the
Qualcomm restart notifier and a few fixes.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=R9dP
-----END PGP SIGNATURE-----
Merge tag 'rproc-v4.14' of git://github.com/andersson/remoteproc
Pull remoteproc updates from Bjorn Andersson:
"This adds and improves remoteproc support for TI DA8xx/OMAP-L13x DSP,
TI Keystone 66AK2G DSP and iMX6SX/7D Cortex M4 coprocessors. It
introduces the Qualcomm restart notifier and a few fixes"
* tag 'rproc-v4.14' of git://github.com/andersson/remoteproc:
remoteproc: Introduce rproc handle accessor for children
remoteproc: qcom: Make ssr_notifiers local
remoteproc: Stop subdevices in reverse order
remoteproc: imx_rproc: add a NXP/Freescale imx_rproc driver
remoteproc: dt: Provide bindings for iMX6SX/7D Remote Processor Controller driver
remoteproc: qcom: Use PTR_ERR_OR_ZERO
remoteproc: st: explicitly request exclusive reset control
remoteproc: qcom: explicitly request exclusive reset control
remoteproc/keystone: explicitly request exclusive reset control
remoteproc/keystone: Add support for Keystone 66AK2G SOCs
remoteproc/davinci: Add device tree support for OMAP-L138 DSP
dt-bindings: remoteproc: Add bindings for Davinci DSP processors
remoteproc/davinci: Add support to parse internal memories
remoteproc/davinci: Switch to platform_get_resource_byname()
remoteproc: make device_type const
soc: qcom: GLINK SSR notifier
remoteproc: qcom: Add support for SSR notifications
remoteproc: Merge __rproc_boot() with rproc_boot()
Compared to the old xrx200_phy_fw driver the new version has multiple
enhancements. The name of the firmware files does not have to be added
to all .dts files anymore - one now configures the GPHY mode (FE or GE)
instead. Each GPHY can now also boot separate firmware (thus mixing of
GE and FE GPHYs is now possible).
The new implementation is based on the RCU syscon-mfd and uses the
reeset_controller framework instead of raw RCU register reads/writes.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Cc: john@phrozen.org
Cc: p.zabel@pengutronix.de
Cc: kishon@ti.com
Cc: mark.rutland@arm.com
Cc: linux-mips@linux-mips.org
Cc: linux-mtd@lists.infradead.org
Cc: linux-watchdog@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: linux-spi@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/17128/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Conversion to kbasename from Rob Herring.
-----BEGIN PGP SIGNATURE-----
iQIcBAABCAAGBQJZna2cAAoJEME3ZuaGi4PXOoAQAIH92exb/UrUjnwOPfXgq9NT
pz0HGBxe8gYzHHSu8jry1GWCnACxdZBZEMzli8NyXELzIwb2OmVSdTCQI1DbJ7ot
gIsO+xl+1LhXrzTi11oRJhMSpTYnRZy3tRRJ9ABwUthO5h058tvd5hSlfIa+XDt7
rpzDhquyI8BRE+8eLgGDu07g+9a2DeMnEIaM+wE3vm9R/YmxB4Whi92kAkbPwKCy
ADEV964DZge4unSyOjxV27FjDqSSOF7vovDp6/R7YSNmEb0uqchvcREBCtwSJjVj
HdDxxjxU1eN+okLv6NB9bWqPK9bUvuyst5wjvt5e1YIiisXN4UMMGZYeEnqmODJd
ZWnKWk4prP1PWAm0hBKZ6GXlmwhNDsUaUNUtt9jN/SBIn+SXgANv+xU1H/xeZf9c
xELAUXMkc3P5bg+ewGkUIsj8qcRN0gs0fx9peu8thofcC0wo3xLMa5AnEJJ3gB4Z
yXLePcFse/z8uQHrcUp+PGC8Wtc7krlAEuPkNGa/KDf4A4NPlBtUF2A2aY3Kh+/X
5ZK5FtK3vh4Uyk1JFWXw06bnYvT6tYEsJRuxNfbVD8JNrl6oFKodkNb+5FC3tXKg
bi9CQ+hc+hR8PEPKzMw0UsEVna2MzC0l3GH+PmhnHJHMW+BBQbv8D4R7WPhjEl78
Hu8C1qlg88w2+jjdZSd2
=gwbs
-----END PGP SIGNATURE-----
Merge tag 'samsung-drivers-4.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/drivers
Pull "Samsung soc drivers changes for v4.14" from Krzysztof Kozłowski:
Conversion to kbasename from Rob Herring.
* tag 'samsung-drivers-4.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
soc: samsung: Use kbasename instead of open coding
Commit 8a46828e623c ("soc/tegra: Register SoC device") added a new
initcall, but forgot to terminate the line with a semi-colon. Some
recent versions of GCC seem to report this as an error.
Fixes: 8a46828e623c ("soc/tegra: Register SoC device")
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Commit 8a46828e623c ("soc/tegra: Register SoC device") added an initcall
to register the SoC device on Tegra. However, that code is unrestricted
and will run on all platforms, causing unwanted warnings.
Fix this by first checking that we're running on hardware that supports
the fuses block that we use to provide SoC information.
Fixes: 8a46828e623c ("soc/tegra: Register SoC device")
Reported-by: Sudeep Holla <sudeep.holla@arm.com>
Tested-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Usual driver changes:
- SUNXI_RSB bus driver enabled by default for ARM64
- Support for SRAM controller and SRAM C block on the A64 added
-----BEGIN PGP SIGNATURE-----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=i+D6
-----END PGP SIGNATURE-----
Merge tag 'sunxi-drivers-for-4.14' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/drivers
Pull "Allwinner driver changes for 4.14" from Chen-Yu Tsai:
Usual driver changes:
- SUNXI_RSB bus driver enabled by default for ARM64
- Support for SRAM controller and SRAM C block on the A64 added
* tag 'sunxi-drivers-for-4.14' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
drivers: soc: sunxi: add support for A64 and its SRAM C
drivers: soc: sunxi: add support for remapping func value to reg value
drivers: soc: sunxi: fix error processing on base address when claiming
dt-bindings: add binding for Allwinner A64 SRAM controller and SRAM C
bus: sunxi-rsb: Enable by default for ARM64
knav_pool_create is an exported function. In the event of a call
before knav_queue_probe, we encounter a NULL pointer dereference
in the following line. Hence return -EPROBE_DEFER to the caller till
the kdev pointer is non-NULL.
Signed-off-by: Keerthy <j-keerthy@ti.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Contains a fix for unbalanced reference counting of device tree nodes in
the PMC-based generic power domains code.
A second change moves the SoC device registration code from its old
location in arch/arm/mach-tegra to drivers/soc/tegra so that it can be
shared between 32-bit and 64-bit ARM Tegra SoCs.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCAAxFiEEiOrDCAFJzPfAjcif3SOs138+s6EFAlmW+3ITHHRyZWRpbmdA
bnZpZGlhLmNvbQAKCRDdI6zXfz6zocmaEACeb9YuHAXaLz4ujzE8JiDmjIIKTtbd
16d75z/d29vVfxCzKAV7yzqugJjPsvc1J6IsWA5g9m+0O36chgpqaQq6AOmTP4us
zE9WRXG922aGu3++9YQVFA3I+ew/9SKBMDJ53JptP8oQsHNERolgNgV5OAeX1SQ7
XBrGLvsnLWtYIj4QjtkbTQhRy8/O7r4kl/mNWuh5LP+dmYA5dfd8v2d2w2xBGKua
4w9f1iLK8fJnBoRXNZj+e/d4LFsYuZcElsqQ46fHN0APAjg9TBuTvYGTAmWeAP8b
VEKjTR1Jaix8XLxyjjIivEUT591BnO15NLfZ3yC8/1wY64daRtE3oFuH3VLM5fgt
E1mrIAd3SJSt2zD/ubh1+Dm21e7bXehajsb+AL6t6wheHbVlM4jf0rjszzGGZof6
s76IY1WcuSYQYx0u0S3upPGBcjPqw+JEf/4hJQ8H/RXpx70v1KDP4dUW6PR58jxk
cPZeOtcqLGWvCfg04/U20OjWn2mpVDU1Gbr7nO5J0xyam/IG7fiDgU4hFLC7HqoE
q67QI7/kssGRmYuWQMBu+cqLj6saOXTUDLvGCrN508r04HbuVwhK4t42P+tmaK8G
ujDNcsdcekjvWn7tgxm5LV7m0puCWbblBwV2WTaFaR5Jv/EKRBQisBByDndNxy8h
lFV8tbUTL8tvNw==
=Qbm4
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-4.14-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/drivers
Pull "soc/tegra: Changes for v4.14-rc1" from Thierry Reding:
Contains a fix for unbalanced reference counting of device tree nodes in
the PMC-based generic power domains code.
A second change moves the SoC device registration code from its old
location in arch/arm/mach-tegra to drivers/soc/tegra so that it can be
shared between 32-bit and 64-bit ARM Tegra SoCs.
* tag 'tegra-for-4.14-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
soc/tegra: Register SoC device
soc/tegra: Fix bad of_node_put() in powergate init
Commit b6a1d093f9 ("PM / Domains: Extend generic power domain
debugfs") now creates a debugfs directory for each genpd based on the
name of the genpd. Currently no name is given to the genpd created by
ti_sci_pm_domains driver so because of this we see a NULL pointer
dereferences when it is accessed on boot when the debugfs entry creation
is attempted.
Give the genpd a name before registering it to avoid this.
Fixes: 52835d59fc ("soc: ti: Add ti_sci_pm_domains driver")
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Allwinner A64's display engine claims the SRAM C section to work.
Add support for the A64 SRAM controller and the SRAM C section of it.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
On some Allwinner SoCs, sometimes the value needed to write into the
register to claim SRAM is not equal to the value specified in the
device tree.
The device tree binding defines 0 as "mapped to CPU" and 1 as "mapped
to X device". This matches the value written to the configuration
register for the SRAM blocks currently supported. However, the not yet
supported VE SRAM block is claimed for the device by writing 0x7fffffff,
which is vastly different from the other blocks. On the A64, SRAM C is
claimed by the device by writing a 0, which is the opposite of the
current design.
Add a value remapping in sunxi_sram_func structure, and let the
sunxi_sram_of_parse function set the remapped register value.
This allows us to keep the convention currently used in the device tree
binding.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
[wens@csie.org: Clarified commit message]
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
When claiming SRAM, if the base is set to an error, it means that the
SRAM controller has been probed, but failed to remap the controller
memory zone. If the base is zero, thus the SRAM controller should be not
probed at all, and it should return -EPROBE_DEFER. However, currently we
returned -EPROBE_DEFER in the former situation, and ignored the latter
situation (which will lead to the kernel to panic).
Fix the behavior on abnormal base address processing when claiming.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Fixes: 4af34b572a ("drivers: soc: sunxi: Introduce SoC driver to map
SRAMs")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Move this code from arch/arm/mach-tegra and make it common among 32-bit
and 64-bit Tegra SoCs. This is slightly complicated by the fact that on
32-bit Tegra, the SoC device is used as the parent for all devices that
are instantiated from device tree.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Remove unnecessary static on local variables syscon_regmap.
Such variables are initialized before being used, on every
execution path throughout the functions. The static has no
benefit and, removing it reduces the object file size.
This issue was detected using Coccinelle and the following
semantic patch:
@bad exists@
position p;
identifier x;
type T;
@@
static T x@p;
...
x = <+...x...+>
@@
identifier x;
expression e;
type T;
position p != bad.p;
@@
-static
T x@p;
... when != x
when strict
?x = e;
In the following log you can see the difference in the object file size.
This log is the output of the size command, before and after the code
change:
before:
text data bss dec hex filename
3339 2104 128 5571 15c3 drivers/soc/versatile/soc-realview.o
after:
text data bss dec hex filename
3321 2048 64 5433 1539 drivers/soc/versatile/soc-realview.o
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add R-Car D3 (r8a77995) support to the Renesas-specific SoC drivers
- SoC identification
- System controller
- Reset controller
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=AO//
-----END PGP SIGNATURE-----
Merge tag 'renesas-drivers-for-v4.14' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/drivers
Pull "Renesas ARM Based SoC Drivers Updates for v4.14" from Simon Horman:
Add R-Car D3 (r8a77995) support to the Renesas-specific SoC drivers
- SoC identification
- System controller
- Reset controller
* tag 'renesas-drivers-for-v4.14' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
soc: renesas: rcar-rst: Add support for R-Car D3
soc: renesas: rcar-sysc: Add support for R-Car D3 power areas
soc: renesas: Add r8a77995 SYSC PM Domain Binding Definitions
soc: renesas: Identify R-Car D3
* Minor fixes for SMSM and WCNSS_CTRL
* Move Qcom SoC drivers to submenu
* Fix mdt_loader to use request_firmware_into_buf()
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=gnby
-----END PGP SIGNATURE-----
Merge tag 'qcom-drivers-for-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/drivers
Pull "Qualcomm ARM Based Driver Updates for v4.14" from Andy Gross:
* Minor fixes for SMSM and WCNSS_CTRL
* Move Qcom SoC drivers to submenu
* Fix mdt_loader to use request_firmware_into_buf()
* tag 'qcom-drivers-for-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux:
soc: qcom: mdt_loader: Use request_firmware_into_buf()
soc: qcom: bring all qcom drivers into a submenu
soc: qcom: wcnss_ctrl: add missing MODULE_DEVICE_TABLE()
soc: qcom: smsm: fix of_node refcnting problem
jtag/sdmmc switching for rk3328.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAlmEP/AQHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgf/lCACcJnVGr9PB9ibmTo7LASmljN+OP2G+9o3i
sOlxlkh5eM5sh9Tbg0NPVBziPmTYhBoPrFQjGEvt01m62gAOf7wugPRStKAivL7h
/pAUhkL1f4yIR0AnplLgy4+9wNJ7zK5DCj4dDCwd0+vX+aZbgDACPLdqn0afwuu2
g8pA3C5fRvThVjNpXzwHQSicUOmsvHPWpOWzx1YiKnXxXGKO0Xev+jDseWGqTMXR
8BXtb62G0QMHGgnrEu2TFex+SzdTumv9r4NpxP3+uytSQogbWUwCUAWpLxxxvgEJ
dAX9VcTaaJU3CMUwKot1mqmec0wElbwogx961An9bi4EoE+ru4Lt
=YgWd
-----END PGP SIGNATURE-----
Merge tag 'v4.14-rockchip-drivers-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/drivers
Pull "Rockchip driver changes for 4.14" from Heiko Stübner:
Powerdomain support for rk3366 and disabling of the automatic
jtag/sdmmc switching for rk3328.
* tag 'v4.14-rockchip-drivers-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
soc: rockchip: power-domain: add power domain support for rk3366
dt-bindings: add binding for rk3366 power domains
dt-bindings: power: add RK3366 SoCs header for power-domain
soc: rockchip: disable jtag switching for RK3328 Soc
Now that we have a custom printf format specifier, convert users of
full_name to use %pOF instead. This is preparation to remove storing
of the full path string for each node.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Matthias Brugger <matthias.bgg@gmail.com>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Cc: Scott Wood <oss@buserror.net>
Cc: Qiang Zhao <qiang.zhao@nxp.com>
Cc: Magnus Damm <magnus.damm@gmail.com>
Cc: Kukjin Kim <kgene@kernel.org>
Cc: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Add missing 'ranges' property for i.MX25 device tree TSCADC node, so
that it's child nodes ADC and TSC device can be probed by kernel.
- Fix i.MX GPCv2 power domain driver to request regulator after power
domain initialization, since regulator could defer probing and
therefore cause power domain initialized twice.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJZhcIQAAoJEFBXWFqHsHzO6N8H/1Uyq0u3a6T29U3BeI6CBKuD
ACYVHKv+eZCk4uMjmVknWTsMKaoGtho52TThd7GYwLxCSB4lmjurXnOpnSbMmgVX
Tl1XfCrmZECf4M0e5eTPbHbfMAI+EJXzNc8echgiLpJwA8rqQ/u9tJ0hxJjviDaI
KtUL01MT5ZfkLD6gXZnBvWA2BvU5ibatgLq1gX2WYONkGwp1aombzcYgM7ADw9NY
xEvJHLb5uVoQRUECW25evQ54leBj0YeoOWFgvjMvFrR9kr/H/LSCG0cKQidCcv1C
v85d6GcYZq/GWtlZn8ThbeQJS044S8KnLS9/z3cqXXjllN5tBB6wEM1s1XcwxKY=
=u055
-----END PGP SIGNATURE-----
Merge tag 'imx-fixes-4.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into fixes
Pull "i.MX fixes for 4.13, round 2" from Shawn Guo:
- Add missing 'ranges' property for i.MX25 device tree TSCADC node, so
that it's child nodes ADC and TSC device can be probed by kernel.
- Fix i.MX GPCv2 power domain driver to request regulator after power
domain initialization, since regulator could defer probing and
therefore cause power domain initialized twice.
* tag 'imx-fixes-4.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: dts: i.MX25: add ranges to tscadc
soc: imx: gpcv2: fix regulator deferred probe
Add SCPSYS power domain driver for MT7622 SoC having four power domains
which are respectively ETHSYS for Ethernet including embedded switch,
WBSYS for WIFI and Bluetooth, HIF0SYS for PCI-E and SATA, and HIF1SYS for
USB. Those functions could be selectively powered gated when the
corresponding function is no longer to use in order to reach more minimal
power dissipation.
Signed-off-by: Chen Zhong <chen.zhong@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Reduce code duplication of scpsys_probe_mtXXXX across all SoCs using
the more generic scpsys_probe all covering all cases to avoid starting
to bloat the driver when more MediaTek SoCs supported are added.
Suggested-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
By switching to the request_firmware_into_buf() we load the segment data
straight into the preallocated buffers, reducing the need for allocating
scratch buffers for these. In particular the modem firmware consists of
multiple segments in the range 5-15MB, making this worth while.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
As the number of qcom drivers increase, entries in SOC menu looks
scattered with other SOC drivers. Make a submenu for Qcom drivers
to make it visibly clear while selecting qcom SOC specific drivers.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
This fixes a problem of wifi module not loading on db410c.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
If a regulator requests a deferred probe, the power domain gets
initialized twice. This leads to a list double add (without
list debugging the kernel hangs due to the double add later):
WARNING: CPU: 0 PID: 19 at lib/list_debug.c:31 __list_add_valid+0xbc/0xc4
list_add double add: new=c1229754, prev=c12383b4, next=c1229754.
Initialize the power domain after we get the regulator. Also do
not print an error in case the regulator defers probing.
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Fixes: 03aa12629f ("soc: imx: Add GPCv2 power gating driver")
Signed-off-by: Stefan Agner <stefan@agner.ch>
Acked-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Tested-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This driver register as a subsystem restart notifier and will send out
notifications to remote processors that has opened the "glink_ssr" GLINK
channel.
This mechanism is used to signal any GLINK participants that a 3rd party
is gone and that the communication state has to be reset; i.e. that read
and write pointers of the GLINK FIFOs are stale.
Acked-by: Andy Gross <andy.gross@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
of_device_ids are not supposed to change at runtime. All functions
working with of_device_ids provided by <linux/of.h> work with const
of_device_ids. So mark the non-const structs as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Acked-by: Chen Zhong <chen.zhong@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
The for_each_child_of_node macro itself maintains the correct reference
count of the nodes so the explicit of_node_put() call causes a warning:
[ 0.098960] OF: ERROR: Bad of_node_put() on /pmc@7000e400/powergates/xusba
[ 0.098981] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.11.3 #1-NixOS
[ 0.098996] Hardware name: NVIDIA Jetson TX1 Developer Kit (DT)
[ 0.099011] Call trace:
[ 0.099034] [<ffff00000808a048>] dump_backtrace+0x0/0x2a0
[ 0.099051] [<ffff00000808a30c>] show_stack+0x24/0x30
[ 0.099069] [<ffff0000084a6494>] dump_stack+0x9c/0xc0
[ 0.099090] [<ffff000008992214>] of_node_release+0xa4/0xa8
[ 0.099107] [<ffff0000084a9270>] kobject_put+0x90/0x1f8
[ 0.099124] [<ffff0000089914ac>] of_node_put+0x24/0x30
[ 0.099140] [<ffff00000898cec4>] __of_get_next_child+0x4c/0x70
[ 0.099155] [<ffff00000898cf28>] of_get_next_child+0x40/0x68
[ 0.099173] [<ffff0000090a099c>] tegra_pmc_early_init+0x4e8/0x5ac
[ 0.099189] [<ffff00000808399c>] do_one_initcall+0x5c/0x168
[ 0.099206] [<ffff000009050c98>] kernel_init_freeable+0xd4/0x240
[ 0.099224] [<ffff000008b2d658>] kernel_init+0x18/0x108
[ 0.099238] [<ffff0000080836c0>] ret_from_fork+0x10/0x50
(It's not very apparent from the OF documentation that of_node_put() is
not needed; the macro itself has no docstring and of_get_next_child()
used in the implementation begins with "Returns a node pointer with
refcount incremented" but then only at the very end of the docstring
the crucial part "Decrements the refcount of prev" is mentioned.)
Fixes: a38045121b ("soc/tegra: pmc: Add generic PM domain support")
Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Amlogic SoCs have a SoC information register for SoC type, package type and
revision information.
This patchs adds support for this register decoding and exposing with the
SoC bus infrastructure.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
The ZTE SoC drivers are only useful when building for a ZTE ZX platform.
Fixes: 4c2c2e3971 ("soc: zte: pm_domains: Prepare for supporting ARMv8 zx2967 family")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Baoyou Xie <baoyou.xie@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
In preparation to not store the full path of nodes in full_name, use
kbasename instead as it will work either with the full path or not.
Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Kukjin Kim <kgene@kernel.org>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: linux-samsung-soc@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Disable IO function switching between sdmmc and jtag
for RK3328 Soc.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
- New SoC specific drivers
- NVIDIA Tegra PM Domain support for newer SoCs (Tegra186 and later)
based on the "BPMP" firmware
- Clocksource and system controller drivers for the newly added
Action Semi platforms (both arm and arm64).
- Reset subsystem, merged through arm-soc by tradition:
- New drivers for Altera Stratix10, TI Keystone and Cortina Gemini SoCs
- Various subsystem-wide cleanups
- Updates for existing SoC-specific drivers
- TI GPMC (General Purpose Memory Controller)
- Mediatek "scpsys" system controller support for MT6797
- Broadcom "brcmstb_gisb" bus arbitrer
- ARM SCPI firmware
- Renesas "SYSC" system controller
One more driver update was submitted for the Freescale/NXP DPAA
data path acceleration that has previously been used on PowerPC
chips. I ended up postponing the merge until some API questions
for its unusual MMIO access are resolved.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=5L6n
-----END PGP SIGNATURE-----
Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC driver updates from Arnd Bergmann:
"New SoC specific drivers:
- NVIDIA Tegra PM Domain support for newer SoCs (Tegra186 and later)
based on the "BPMP" firmware
- Clocksource and system controller drivers for the newly added
Action Semi platforms (both arm and arm64).
Reset subsystem, merged through arm-soc by tradition:
- New drivers for Altera Stratix10, TI Keystone and Cortina Gemini
SoCs
- Various subsystem-wide cleanups
Updates for existing SoC-specific drivers
- TI GPMC (General Purpose Memory Controller)
- Mediatek "scpsys" system controller support for MT6797
- Broadcom "brcmstb_gisb" bus arbitrer
- ARM SCPI firmware
- Renesas "SYSC" system controller
One more driver update was submitted for the Freescale/NXP DPAA data
path acceleration that has previously been used on PowerPC chips. I
ended up postponing the merge until some API questions for its unusual
MMIO access are resolved"
* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (35 commits)
clocksource: owl: Add S900 support
clocksource: Add Owl timer
soc: renesas: rcar-sysc: Use GENPD_FLAG_ALWAYS_ON
firmware: tegra: Fix locking bugs in BPMP
soc/tegra: flowctrl: Fix error handling
soc/tegra: bpmp: Implement generic PM domains
soc/tegra: bpmp: Update ABI header
PM / Domains: Allow overriding the ->xlate() callback
soc: brcmstb: enable drivers for ARM64 and BMIPS
soc: renesas: Rework Kconfig and Makefile logic
reset: Add the TI SCI reset driver
dt-bindings: reset: Add TI SCI reset binding
reset: use kref for reference counting
soc: qcom: smsm: Improve error handling, quiesce probe deferral
cpufreq: scpi: use new scpi_ops functions to remove duplicate code
firmware: arm_scpi: add support to populate OPPs and get transition latency
dt-bindings: reset: Add reset manager offsets for Stratix10
memory: omap-gpmc: add error message if bank-width property is absent
memory: omap-gpmc: make dts snippet include semicolon
reset: Add a Gemini reset controller
...
This adds clock source and power domain drivers for S500/S900.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=FpP/
-----END PGP SIGNATURE-----
Merge tag 'actions-drivers-for-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/afaerber/linux-actions into next/drivers
Pull "Actions Semi SoC drivers for 4.13" from Andreas Färber:
This adds clock source and power domain drivers for S500/S900.
* tag 'actions-drivers-for-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/afaerber/linux-actions:
soc: actions: owl-sps: Factor out owl_sps_set_pg() for power-gating
soc: actions: Add Owl SPS
dt-bindings: power: Add Owl SPS power domains
clocksource: owl: Add S900 support
clocksource: Add Owl timer
This adds SMP code to bring up the remaining S500 CPU cores
by reusing a helper factored out of the SPS power domains driver.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=VNDJ
-----END PGP SIGNATURE-----
Merge tag 'actions-arm-soc+sps-for-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/afaerber/linux-actions into next/soc
Pull "Actions Semi ARM SoC for v4.13 #2" from Andreas Färber:
This adds SMP code to bring up the remaining S500 CPU cores
by reusing a helper factored out of the SPS power domains driver.
* tag 'actions-arm-soc+sps-for-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/afaerber/linux-actions:
ARM: owl: smp: Implement SPS power-gating for CPU2 and CPU3
soc: actions: owl-sps: Factor out owl_sps_set_pg() for power-gating
soc: actions: Add Owl SPS
dt-bindings: power: Add Owl SPS power domains
Implement S500 Smart Power System power-gating.
For now flag PD_CPU2 and PD_CPU3 as always-on.
Based on LeMaker linux-actions tree.
Signed-off-by: Andreas Färber <afaerber@suse.de>
- Add CONFIG_HAVE_IMX_GPC to control the build of GPC driver, so that
it doesn't build for platforms that do not have it.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJZRb8UAAoJEFBXWFqHsHzOVkEH/2XVa1Irw/GTEWdm84ooeMMJ
pHKcj1Mu2d1QAXq/GpZnPK1Bukp0RH5H0Lrh/8EHzgekNZB4dPEd61GNPj4ePYtV
i23+VCPEdXPedqZxvI14avKb9jlY/ko0Dn2QNFa2GFKRApWZzDMGLYvskmtri5GI
6YZYojlJNOe/d6r9E8ER+uxqN68+qcNKkRhuKs2QCXVZBc+tj4YsCAuzAw8d/esk
wAiUQ7wbE/8e1QF61mKzKG08ySHCoGh7vGTwJteL+hZ9x1+ylnSFxcyuZZlKZmX4
p/aJRvublpvMQluv2zWPz0BmuiN45uD7rxazb2HtSqflP9QrbkqDJlIXyCtF5RI=
=Yqmp
-----END PGP SIGNATURE-----
Merge tag 'imx-drivers-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/drivers
The i.MX drivers update for 4.13:
- Add CONFIG_HAVE_IMX_GPC to control the build of GPC driver, so that
it doesn't build for platforms that do not have it.
* tag 'imx-drivers-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
soc: imx: gpc: build gpc only if hardware has gpc
Signed-off-by: Olof Johansson <olof@lixom.net>
Use GENPD_FLAG_ALWAYS_ON in R-Car SYSC driver
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=QQgo
-----END PGP SIGNATURE-----
Merge tag 'renesas-rcar-sysc-for-v4.13' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/drivers
Renesas ARM Based SoC R-Car SYSC Updates for v4.13
Use GENPD_FLAG_ALWAYS_ON in R-Car SYSC driver
* tag 'renesas-rcar-sysc-for-v4.13' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
soc: renesas: rcar-sysc: Use GENPD_FLAG_ALWAYS_ON
Signed-off-by: Olof Johansson <olof@lixom.net>
This contains an implementation of generic PM domains for Tegra186,
based on the BPMP powergate request.
-----BEGIN PGP SIGNATURE-----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=uyV7
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-4.13-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/drivers
soc/tegra: Changes for v4.13-rc1
This contains an implementation of generic PM domains for Tegra186,
based on the BPMP powergate request.
* tag 'tegra-for-4.13-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
soc/tegra: flowctrl: Fix error handling
soc/tegra: bpmp: Implement generic PM domains
soc/tegra: bpmp: Update ABI header
PM / Domains: Allow overriding the ->xlate() callback
Signed-off-by: Olof Johansson <olof@lixom.net>
4.13, please pull the following:
- Doug adds support for the latest generation GISB bus arbiter (v7), he starts by
fixing two issues in how registers are written, and how 64-bit addresses are captured
and then he simplifies the error interception by using notifiers, which allows him
to add support for ARM64
- Markus updates the SOC_BRCMSTB Kconfig depends to cover ARM64 and BMIPS_GENERIC
systems where this code is now also used
-----BEGIN PGP SIGNATURE-----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=Skk5
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-4.13/drivers' of http://github.com/Broadcom/stblinux into next/drivers
This pull request contains Broadcom ARM/ARM64 SoCs specific driver changes for
4.13, please pull the following:
- Doug adds support for the latest generation GISB bus arbiter (v7), he starts by
fixing two issues in how registers are written, and how 64-bit addresses are captured
and then he simplifies the error interception by using notifiers, which allows him
to add support for ARM64
- Markus updates the SOC_BRCMSTB Kconfig depends to cover ARM64 and BMIPS_GENERIC
systems where this code is now also used
* tag 'arm-soc/for-4.13/drivers' of http://github.com/Broadcom/stblinux:
soc: brcmstb: enable drivers for ARM64 and BMIPS
bus: brcmstb_gisb: update to support new revision
bus: brcmstb_gisb: enable driver for ARM64 architecture
bus: brcmstb_gisb: remove low-level ARM hooks
bus: brcmstb_gisb: add notifier handling
bus: brcmstb_gisb: correct support for 64-bit address output
bus: brcmstb_gisb: Use register offsets with writes too
Signed-off-by: Olof Johansson <olof@lixom.net>
Improve handling of always-on PM domains by using the
GENPD_FLAG_ALWAYS_ON flag introduced in commit ffaa42e8a4 ("PM /
Domains: Enable users of genpd to specify always on PM domains").
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
It is likely that returning returned by 'devm_ioremap_resource()' is
expected here instead of something related to 'base' which should be a
valid pointer at this point.
Fixes: 841fd94c43 ("soc/tegra: flowctrl: Add basic platform driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The BPMP firmware, found on Tegra186 and later, provides an ABI that can
be used to enable and disable power to several power partitions in Tegra
SoCs. The ABI allows for enumeration of the available power partitions,
so the driver can be reused on future generations, provided the BPMP ABI
remains stable.
Based on work by Stefan Kristiansson <stefank@nvidia.com> and Mikko
Perttunen <mperttunen@nvidia.com>.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
We enable the BRCMSTB SoC drivers not only for ARM, but also ARM64 and
BMIPS.
Signed-off-by: Markus Mayer <mmayer@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
The goals are to:
- Allow precise control over and automatic selection of which
(sub)drivers are used for which SoC,
- Allow adding support for new SoCs easily,
- Allow compile-testing of all (sub)drivers,
- Keep driver selection logic in the subsystem-specific Kconfig,
independent from the architecture-specific Kconfig (i.e. no "select"
from arch/arm64/Kconfig.platforms), to avoid dependencies.
This is implemented by:
- Introducing Kconfig symbols for all drivers and sub-drivers,
- Introducing the Kconfig symbol SOC_RENESAS, which is enabled
automatically when building for a Renesas ARM platform, and which
enables all required drivers without interaction of the user, based
on SoC-specific ARCH_* symbols,
- Allowing the user to enable any Kconfig symbol manually if
COMPILE_TEST is enabled,
- Using the new Kconfig symbols instead of the ARCH_* symbols to
control compilation in the Makefile,
- Always entering drivers/soc/renesas/ during the build.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Don't use size if info indicates an error condition. Previously a
non-ENOENT error (such as -EPROBE_DEFER) would lead to size being used
even though it hadn't necessarily been initialized in qcom_smem_get.
Don't print an error message in the -EPROBE_DEFER case.
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
We had a small batch of fixes before -rc1, but here is a larger one. It
contains a backmerge of 4.12-rc1 since some of the downstream branches we
merge had that as base; at the same time we already had merged contents
before -rc1 and rebase wasn't the right solution.
A mix of random smaller fixes and a few things worth pointing out:
- We've started telling people to avoid cross-tree shared branches if all
they're doing is picking up one or two DT-used constants from a
shared include file, and instead to use the numeric values on first
submission. Follow-up moving over to symbolic names are sent in right
after -rc1, i.e. here. It's only a few minor patches of this type.
- Linus Walleij and others are resurrecting the 'Gemini' platform, and
wanted a cut-down platform-specific defconfig for it. So I picked that
up for them.
- Rob Herring ran 'savedefconfig' on arm64, it's a bit churny but it helps
people to prepare patches since it's a pain when defconfig and current
savedefconfig contents differs too much.
- Devicetree additions for some pinctrl drivers for Armada that were
merged this window. I'd have preferred to see those earlier but it's not
a huge deail.
The biggest change worth pointing out though since it's touching other
parts of the tree: We added prefixes to be used when cross-including
DT contents between arm64 and arm, allowing someone to #include
<arm/foo.dtsi> from arm64, and likewise. As part of that, we needed
arm/foo.dtsi to work on arm as well. The way I suggested this to Heiko
resulted in a recursive symlink.
Instead, I've now moved it out of arch/*/boot/dts/include, into a shared
location under scripts/dtc. While I was at it, I consolidated so all
architectures now behave the same way in this manner.
Rob Herring (DT maintainer) has acked it. I cc:d most other arch
maintainers but nobody seems to care much; it doesn't really affect them
since functionality is unchanged for them by default.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=2EGB
-----END PGP SIGNATURE-----
Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson:
"We had a small batch of fixes before -rc1, but here is a larger one.
It contains a backmerge of 4.12-rc1 since some of the downstream
branches we merge had that as base; at the same time we already had
merged contents before -rc1 and rebase wasn't the right solution.
A mix of random smaller fixes and a few things worth pointing out:
- We've started telling people to avoid cross-tree shared branches if
all they're doing is picking up one or two DT-used constants from a
shared include file, and instead to use the numeric values on first
submission. Follow-up moving over to symbolic names are sent in
right after -rc1, i.e. here. It's only a few minor patches of this
type.
- Linus Walleij and others are resurrecting the 'Gemini' platform,
and wanted a cut-down platform-specific defconfig for it. So I
picked that up for them.
- Rob Herring ran 'savedefconfig' on arm64, it's a bit churny but it
helps people to prepare patches since it's a pain when defconfig
and current savedefconfig contents differs too much.
- Devicetree additions for some pinctrl drivers for Armada that were
merged this window. I'd have preferred to see those earlier but
it's not a huge deail.
The biggest change worth pointing out though since it's touching other
parts of the tree: We added prefixes to be used when cross-including
DT contents between arm64 and arm, allowing someone to #include
<arm/foo.dtsi> from arm64, and likewise. As part of that, we needed
arm/foo.dtsi to work on arm as well. The way I suggested this to Heiko
resulted in a recursive symlink.
Instead, I've now moved it out of arch/*/boot/dts/include, into a
shared location under scripts/dtc. While I was at it, I consolidated
so all architectures now behave the same way in this manner.
Rob Herring (DT maintainer) has acked it. I cc:d most other arch
maintainers but nobody seems to care much; it doesn't really affect
them since functionality is unchanged for them by default"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (29 commits)
arm64: dts: rockchip: fix include reference
firmware: ti_sci: fix strncat length check
ARM: remove duplicate 'const' annotations'
arm64: defconfig: enable options needed for QCom DB410c board
arm64: defconfig: sync with savedefconfig
ARM: configs: add a gemini defconfig
devicetree: Move include prefixes from arch to separate directory
ARM: dts: dra7: Reduce cpu thermal shutdown temperature
memory: omap-gpmc: Fix debug output for access width
ARM: dts: LogicPD Torpedo: Fix camera pin mux
ARM: dts: omap4: enable CEC pin for Pandaboard A4 and ES
ARM: dts: gta04: fix polarity of clocks for mcbsp4
ARM: dts: dra7: Add power hold and power controller properties to palmas
soc: imx: add PM dependency for IMX7_PM_DOMAINS
ARM: dts: imx6sx-sdb: Remove OPP override
ARM: dts: imx53-qsrb: Pulldown PMIC IRQ pin
soc: bcm: brcmstb: Correctly match 7435 SoC
tee: add ARM_SMCCC dependency
ARM: omap2+: make omap4_get_cpu1_ns_pa_addr declaration usable
ARM64: dts: mediatek: configure some fixed mmc parameters
...
- A fix on GPCv2 power domain driver Kconfig which causes a build
failure when CONFIG_PM is not set.
- Pull down PMIC IRQ pin for imx53-qsrb board to prevent spurious
PMIC interrupts from happening.
- Remove board level OPP override for imx6sx-sdb to fix a boot crash
seen on Rev.C boards.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJZHav8AAoJEFBXWFqHsHzOPWMH/RP4LuJDUoFaPUJ3WsrMhPYR
qmBEzZXvjKBxImFCIiG09vcjQIiN9p5uZ9AqNIQGgoW20DlFKVZ0Rd64MJzp8QnL
J/WwEDTG1qs2jCkNWYkFEUwz6fMWzzTUydj665dkQI3SNwRAJ9dE0LgybM6Yws3C
FQdIUyWR2z8QQYqjLTD9XuDe7ewyoslvFssWRiVzpcnkiu8sWgbTuJ/K+ISCgwo4
rC6Vi7Z4WU47SgL7+d9sOMzDPDIif5mOdfW8uG3tgCeDp/8WNz9IbamCuxhggQpa
+k9jaTHAtOV9ypf1PBUCGHazU7E8hc42XoW6XT0yY3sFynw+VPd1IFVXiWAEBu0=
=gQA8
-----END PGP SIGNATURE-----
Merge tag 'imx-fixes-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into fixes
i.MX fixes for 4.12:
- A fix on GPCv2 power domain driver Kconfig which causes a build
failure when CONFIG_PM is not set.
- Pull down PMIC IRQ pin for imx53-qsrb board to prevent spurious
PMIC interrupts from happening.
- Remove board level OPP override for imx6sx-sdb to fix a boot crash
seen on Rev.C boards.
* tag 'imx-fixes-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
soc: imx: add PM dependency for IMX7_PM_DOMAINS
ARM: dts: imx6sx-sdb: Remove OPP override
ARM: dts: imx53-qsrb: Pulldown PMIC IRQ pin
Signed-off-by: Olof Johansson <olof@lixom.net>
Pull networking fixes from David Miller:
1) Track alignment in BPF verifier so that legitimate programs won't be
rejected on !CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS architectures.
2) Make tail calls work properly in arm64 BPF JIT, from Deniel
Borkmann.
3) Make the configuration and semantics Generic XDP make more sense and
don't allow both generic XDP and a driver specific instance to be
active at the same time. Also from Daniel.
4) Don't crash on resume in xen-netfront, from Vitaly Kuznetsov.
5) Fix use-after-free in VRF driver, from Gao Feng.
6) Use netdev_alloc_skb_ip_align() to avoid unaligned IP headers in
qca_spi driver, from Stefan Wahren.
7) Always run cleanup routines in BPF samples when we get SIGTERM, from
Andy Gospodarek.
8) The mdio phy code should bring PHYs out of reset using the shared
GPIO lines before invoking bus->reset(). From Florian Fainelli.
9) Some USB descriptor access endian fixes in various drivers from
Johan Hovold.
10) Handle PAUSE advertisements properly in mlx5 driver, from Gal
Pressman.
11) Fix reversed test in mlx5e_setup_tc(), from Saeed Mahameed.
12) Cure netdev leak in AF_PACKET when using timestamping via control
messages. From Douglas Caetano dos Santos.
13) netcp doesn't support HWTSTAMP_FILTER_ALl, reject it. From Miroslav
Lichvar.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (52 commits)
ldmvsw: stop the clean timer at beginning of remove
ldmvsw: unregistering netdev before disable hardware
net: netcp: fix check of requested timestamping filter
ipv6: avoid dad-failures for addresses with NODAD
qed: Fix uninitialized data in aRFS infrastructure
mdio: mux: fix device_node_continue.cocci warnings
net/packet: fix missing net_device reference release
net/mlx4_core: Use min3 to select number of MSI-X vectors
macvlan: Fix performance issues with vlan tagged packets
net: stmmac: use correct pointer when printing normal descriptor ring
net/mlx5: Use underlay QPN from the root name space
net/mlx5e: IPoIB, Only support regular RQ for now
net/mlx5e: Fix setup TC ndo
net/mlx5e: Fix ethtool pause support and advertise reporting
net/mlx5e: Use the correct pause values for ethtool advertising
vmxnet3: ensure that adapter is in proper state during force_close
sfc: revert changes to NIC revision numbers
net: ch9200: add missing USB-descriptor endianness conversions
net: irda: irda-usb: fix firmware name on big-endian hosts
net: dsa: mv88e6xxx: add default case to switch
...
of_match_device could return NULL, and so can cause a NULL
pointer dereference later.
Signed-off-by: Shailendra Verma <shailendra.v@samsung.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
According to error handling in this function, it is likely that going to
'err_out2' was expected here.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
This adds scpsys support for MT6797
Signed-off-by: Mars Cheng <mars.cheng@mediatek.com>
Signed-off-by: Kevin-CW Chen <kevin-cw.chen@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
for some chips, there is vdec item in scpsys, this patch adds it.
Signed-off-by: Mars Cheng <mars.cheng@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Use variables to replace fixed defines since the offset
of the status of spm power might be different for some chips
Signed-off-by: Mars Cheng <mars.cheng@mediatek.com>
Signed-off-by: Kevin-CW Chen <kevin-cw.chen@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Add CONFIG_HAVE_IMX_GPC to goal definition of gpc.o,
to avoid building it for hardware that does not need it.
Signed-off-by: Marc Ohlf <ohlf@mkt-sys.de>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The new pm domain driver causes a build failure when CONFIG_PM
is not set:
warning: (IMX7_PM_DOMAINS) selects PM_GENERIC_DOMAINS which has unmet direct dependencies (PM)
drivers/base/power/domain_governor.c: In function 'default_suspend_ok':
drivers/base/power/domain_governor.c:75:17: error: 'struct dev_pm_info' has no member named 'ignore_children'
This adds a dependency to ensure that we don't attempt to build the
driver without CONFIG_PM.
Fixes: 03aa12629f ("soc: imx: Add GPCv2 power gating driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Remove the duplicate brcm,bcm7425-sun-top-ctrl compatible string and
replace it with brcm,bcm7435-sun-top-ctrl which was intended.
Fixes: bd0faf08dc ("soc: bcm: brcmstb: Match additional compatible strings")
Reported-by: Andreas Oberritter <obi@saftware.de>
Acked-by: Gregory Fong <gregory.0xf0@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Highlights include:
- rework the Linux page table geometry to lower memory usage on 64-bit Book3S
(IBM chips) using the Hash MMU.
- support for a new device tree binding for discovering CPU features on future
firmwares.
- Freescale updates from Scott: "Includes a fix for a powerpc/next mm regression
on 64e, a fix for a kernel hang on 64e when using a debugger inside a
relocated kernel, a qman fix, and misc qe improvements."
Thanks to:
Christophe Leroy, Gavin Shan, Horia Geantă, LiuHailong, Nicholas Piggin, Roy
Pledge, Scott Wood, Valentin Longchamp.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=YOQs
-----END PGP SIGNATURE-----
Merge tag 'powerpc-4.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull more powerpc updates from Michael Ellerman:
"The change to the Linux page table geometry was delayed for more
testing with 16G pages, and there's the new CPU features stuff which
just needed one more polish before going in. Plus a few changes from
Scott which came in a bit late. And then various fixes, mostly minor.
Summary highlights:
- rework the Linux page table geometry to lower memory usage on
64-bit Book3S (IBM chips) using the Hash MMU.
- support for a new device tree binding for discovering CPU features
on future firmwares.
- Freescale updates from Scott:
"Includes a fix for a powerpc/next mm regression on 64e, a fix for
a kernel hang on 64e when using a debugger inside a relocated
kernel, a qman fix, and misc qe improvements."
Thanks to: Christophe Leroy, Gavin Shan, Horia Geantă, LiuHailong,
Nicholas Piggin, Roy Pledge, Scott Wood, Valentin Longchamp"
* tag 'powerpc-4.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/64s: Support new device tree binding for discovering CPU features
powerpc: Don't print cpu_spec->cpu_name if it's NULL
of/fdt: introduce of_scan_flat_dt_subnodes and of_get_flat_dt_phandle
powerpc/64s: Fix unnecessary machine check handler relocation branch
powerpc/mm/book3s/64: Rework page table geometry for lower memory usage
powerpc: Fix distclean with Makefile.postlink
powerpc/64e: Don't place the stack beyond TASK_SIZE
powerpc/powernv: Block PCI config access on BCM5718 during EEH recovery
powerpc/8xx: Adding support of IRQ in MPC8xx GPIO
soc/fsl/qbman: Disable IRQs for deferred QBMan work
soc/fsl/qe: add EXPORT_SYMBOL for the 2 qe_tdm functions
soc/fsl/qe: only apply QE_General4 workaround on affected SoCs
soc/fsl/qe: round brg_freq to 1kHz granularity
soc/fsl/qe: get rid of immrbar_virt_to_phys()
net: ethernet: ucc_geth: fix MEM_PART_MURAM mode
powerpc/64e: Fix hang when debugging programs with relocated kernel
Fix error path while dma open channel issue. Also, no need to check output
on NULL if it's never returned.
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This includes:
* Some code optimizations for the Intel VT-d driver
* Code to switch off a previously enabled Intel IOMMU
* Support for 'struct iommu_device' for OMAP, Rockchip and
Mediatek IOMMUs
* Some header optimizations for IOMMU core code headers and a
few fixes that became necessary in other parts of the kernel
because of that
* ACPI/IORT updates and fixes
* Some Exynos IOMMU optimizations
* Code updates for the IOMMU dma-api code to bring it closer to
use per-cpu iova caches
* New command-line option to set default domain type allocated
by the iommu core code
* Another command line option to allow the Intel IOMMU switched
off in a tboot environment
* ARM/SMMU: TLB sync optimisations for SMMUv2, Support for using
an IDENTITY domain in conjunction with DMA ops, Support for
SMR masking, Support for 16-bit ASIDs (was previously broken)
* Various other small fixes and improvements
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=3aE8
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull IOMMU updates from Joerg Roedel:
- code optimizations for the Intel VT-d driver
- ability to switch off a previously enabled Intel IOMMU
- support for 'struct iommu_device' for OMAP, Rockchip and Mediatek
IOMMUs
- header optimizations for IOMMU core code headers and a few fixes that
became necessary in other parts of the kernel because of that
- ACPI/IORT updates and fixes
- Exynos IOMMU optimizations
- updates for the IOMMU dma-api code to bring it closer to use per-cpu
iova caches
- new command-line option to set default domain type allocated by the
iommu core code
- another command line option to allow the Intel IOMMU switched off in
a tboot environment
- ARM/SMMU: TLB sync optimisations for SMMUv2, Support for using an
IDENTITY domain in conjunction with DMA ops, Support for SMR masking,
Support for 16-bit ASIDs (was previously broken)
- various other small fixes and improvements
* tag 'iommu-updates-v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (63 commits)
soc/qbman: Move dma-mapping.h include to qman_priv.h
soc/qbman: Fix implicit header dependency now causing build fails
iommu: Remove trace-events include from iommu.h
iommu: Remove pci.h include from trace/events/iommu.h
arm: dma-mapping: Don't override dma_ops in arch_setup_dma_ops()
ACPI/IORT: Fix CONFIG_IOMMU_API dependency
iommu/vt-d: Don't print the failure message when booting non-kdump kernel
iommu: Move report_iommu_fault() to iommu.c
iommu: Include device.h in iommu.h
x86, iommu/vt-d: Add an option to disable Intel IOMMU force on
iommu/arm-smmu: Return IOVA in iova_to_phys when SMMU is bypassed
iommu/arm-smmu: Correct sid to mask
iommu/amd: Fix incorrect error handling in amd_iommu_bind_pasid()
iommu: Make iommu_bus_notifier return NOTIFY_DONE rather than error code
omap3isp: Remove iommu_group related code
iommu/omap: Add iommu-group support
iommu/omap: Make use of 'struct iommu_device'
iommu/omap: Store iommu_dev pointer in arch_data
iommu/omap: Move data structures to omap-iommu.h
iommu/omap: Drop legacy-style device support
...
Driver updates for ARM SoCs.
* Reset subsystem, merged through arm-soc by tradition:
- Make bool drivers explicitly non-modular
- New support for i.MX7 and Arria10 reset controllers
* PATA driver for Palmchip BK371 (acked by Tejun)
* Power domain drivers for i.MX (GPC, GPCv2)
- Moved out of mach-imx for GPC
- Bunch of tweaks, fixes, etc
* PMC support for Tegra186
* SoC detection support for Renesas RZ/G1H and RZ/G1N
* Move Tegra flow controller driver from mach directory to drivers/soc
- (Power management / CPU power driver)
* Misc smaller tweaks for other platforms
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=B43K
-----END PGP SIGNATURE-----
Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC driver updates from Olof Johansson:
"Driver updates for ARM SoCs:
Reset subsystem, merged through arm-soc by tradition:
- Make bool drivers explicitly non-modular
- New support for i.MX7 and Arria10 reset controllers
PATA driver for Palmchip BK371 (acked by Tejun)
Power domain drivers for i.MX (GPC, GPCv2)
- Moved out of mach-imx for GPC
- Bunch of tweaks, fixes, etc
PMC support for Tegra186
SoC detection support for Renesas RZ/G1H and RZ/G1N
Move Tegra flow controller driver from mach directory to drivers/soc
- (Power management / CPU power driver)
Misc smaller tweaks for other platforms"
* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (60 commits)
soc: pm-domain: Fix the mangled urls
soc: renesas: rcar-sysc: Add support for R-Car H3 ES2.0
soc: renesas: rcar-sysc: Add support for fixing up power area tables
soc: renesas: Register SoC device early
soc: imx: gpc: add workaround for i.MX6QP to the GPC PD driver
dt-bindings: imx-gpc: add i.MX6 QuadPlus compatible
soc: imx: gpc: add defines for domain index
soc: imx: Add GPCv2 power gating driver
dt-bindings: Add GPCv2 power gating driver
ARM/clk: move the ICST library to drivers/clk
ARM: plat-versatile: remove stale clock header
ARM: keystone: Drop PM domain support for k2g
soc: ti: Add ti_sci_pm_domains driver
dt-bindings: Add TI SCI PM Domains
PM / Domains: Do not check if simple providers have phandle cells
PM / Domains: Add generic data pointer to genpd data struct
soc/tegra: Add initial flowctrl support for Tegra132/210
soc/tegra: flowctrl: Add basic platform driver
soc/tegra: Move Tegra flowctrl driver
ARM: tegra: Remove unnecessary inclusion of flowctrl header
...
SoC platform changes (arch/arm/mach-*). This merge window, the bulk is
for a few platforms:
* Gemini:
- Legacy platform that Linus Walleij has converted to multiplatform
and DT, so a handful of various tweaks there, removal of some old
stale support, etc.
* Atmel AT91:
- Fixup of various power management related pieces
- Move of SoC detection to a drivers/soc driver instead
* ST Micro STM32:
- New SoC support: STM32H743
* TI platforms:
- More driver support for Davinci (SATA in particular)
- Removal of some old stale hwmod files (linkspace platform)
* Misc:
- A couple of smaller patches for i.MX, sunxi, hisi
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=ZdtJ
-----END PGP SIGNATURE-----
Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC platform updates from Olof Johansson:
"SoC platform changes (arch/arm/mach-*). This merge window, the bulk is
for a few platforms:
Gemini:
- Legacy platform that Linus Walleij has converted to multiplatform
and DT, so a handful of various tweaks there, removal of some old
stale support, etc.
Atmel AT91:
- Fixup of various power management related pieces
- Move of SoC detection to a drivers/soc driver instead
ST Micro STM32:
- New SoC support: STM32H743
TI platforms:
- More driver support for Davinci (SATA in particular)
- Removal of some old stale hwmod files (linkspace platform)
Misc:
- A couple of smaller patches for i.MX, sunxi, hisi"
* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (57 commits)
ARM: davinci: Add clock for CPPI 4.1 DMA engine
ARM: mxs: add support for I2SE Duckbill 2 boards
MAINTAINERS: Update the Allwinner sunXi entry
ARM: i.MX25: globally disable supervisor protect
ARM: at91: move SoC detection to its own driver
ARM: at91: pm: correct typo
ARM: at91: pm: Remove at91_pm_set_standby
ARM: at91: pm: Merge all at91sam9*_pm_init
ARM: at91: pm: Tie the USB clock mask to the pmc
ARM: at91: pm: Tie the memory controller type to the ramc id
ARM: at91: pm: Workaround DDRSDRC self-refresh bug with LPDDR1 memories.
ARM: at91: pm: Simplify at91rm9200_standby
ARM: at91: pm: Use struct at91_pm_data in pm_suspend.S
ARM: at91: pm: Move global variables into at91_pm_data
ARM: at91: pm: Move at91_ramc_read/write to pm.c
ARM: at91: pm: Cleanup headers
MAINTAINERS: Add memory drivers to AT91 entry
MAINTAINERS: Update AT91 entry
ARM: davinci: add pata_bk3710 libata driver support
ARM: OMAP2+: mark omap_init_rng as __init
...
With the include there it fixes all build failures in this
directory caused by commit 461a6946b1.
Fixes: 461a6946b1 ("iommu: Remove pci.h include from trace/events/iommu.h")
Signed-off-by: Joerg Roedel <jroedel@suse.de>
In commit 461a6946b1 ("iommu: Remove pci.h include from
trace/events/iommu.h") that header shuffle uncovered an implicit
include in this driver, manifesting as:
CC drivers/soc/fsl/qbman/qman_portal.o
drivers/soc/fsl/qbman/qman_portal.c: In function 'qman_portal_probe':
drivers/soc/fsl/qbman/qman_portal.c:299:2: error: implicit declaration of function 'dma_set_mask'
drivers/soc/fsl/qbman/qman_portal.c:299:2: error: implicit declaration of function 'DMA_BIT_MASK'
if (dma_set_mask(dev, DMA_BIT_MASK(40))) {
^
on the corenet32_smp_defconfig (and 64 bit respectively.) The above
commit was singled out via git bisect.
The header it was implictly relying on getting was dma-mapping.h - so
we explicitly add it here.
Fixes: 461a6946b1 ("iommu: Remove pci.h include from trace/events/iommu.h")
Cc: Joerg Roedel <jroedel@suse.de>
Cc: Scott Wood <oss@buserror.net>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Pull networking updates from David Millar:
"Here are some highlights from the 2065 networking commits that
happened this development cycle:
1) XDP support for IXGBE (John Fastabend) and thunderx (Sunil Kowuri)
2) Add a generic XDP driver, so that anyone can test XDP even if they
lack a networking device whose driver has explicit XDP support
(me).
3) Sparc64 now has an eBPF JIT too (me)
4) Add a BPF program testing framework via BPF_PROG_TEST_RUN (Alexei
Starovoitov)
5) Make netfitler network namespace teardown less expensive (Florian
Westphal)
6) Add symmetric hashing support to nft_hash (Laura Garcia Liebana)
7) Implement NAPI and GRO in netvsc driver (Stephen Hemminger)
8) Support TC flower offload statistics in mlxsw (Arkadi Sharshevsky)
9) Multiqueue support in stmmac driver (Joao Pinto)
10) Remove TCP timewait recycling, it never really could possibly work
well in the real world and timestamp randomization really zaps any
hint of usability this feature had (Soheil Hassas Yeganeh)
11) Support level3 vs level4 ECMP route hashing in ipv4 (Nikolay
Aleksandrov)
12) Add socket busy poll support to epoll (Sridhar Samudrala)
13) Netlink extended ACK support (Johannes Berg, Pablo Neira Ayuso,
and several others)
14) IPSEC hw offload infrastructure (Steffen Klassert)"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2065 commits)
tipc: refactor function tipc_sk_recv_stream()
tipc: refactor function tipc_sk_recvmsg()
net: thunderx: Optimize page recycling for XDP
net: thunderx: Support for XDP header adjustment
net: thunderx: Add support for XDP_TX
net: thunderx: Add support for XDP_DROP
net: thunderx: Add basic XDP support
net: thunderx: Cleanup receive buffer allocation
net: thunderx: Optimize CQE_TX handling
net: thunderx: Optimize RBDR descriptor handling
net: thunderx: Support for page recycling
ipx: call ipxitf_put() in ioctl error path
net: sched: add helpers to handle extended actions
qed*: Fix issues in the ptp filter config implementation.
qede: Fix concurrency issue in PTP Tx path processing.
stmmac: Add support for SIMATIC IOT2000 platform
net: hns: fix ethtool_get_strings overflow in hns driver
tcp: fix wraparound issue in tcp_lp
bpf, arm64: fix jit branch offset related to ldimm64
bpf, arm64: implement jiting of BPF_XADD
...
Work for Congestion State Notifications (CSCN) and Message Ring (MR)
handling is handled via the workqueue mechanism. This requires the
driver to disable those IRQs before scheduling the work and re-enabling
it once the work is completed so that the interrupt doesn't continually
fire.
Signed-off-by: Roy Pledge <roy.pledge@nxp.com>
Signed-off-by: Scott Wood <oss@buserror.net>
This allows to build the fsl_ucc_hdlc driver as a module.
Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com>
Signed-off-by: Scott Wood <oss@buserror.net>
The QE_General4 workaround is only valid for the MPC832x and MPC836x
SoCs. The other SoCs that embed a QUICC engine are not affected by this
hardware bug and thus can use the computed divisors (this was
successfully tested on the T1040).
Similalry to what was done in commit 8ce795cb0c ("i2c: mpc: assign the
correct prescaler from SVR") in order to avoid changes in
the device tree nodes of the QE (with maybe a variant of the compatible
property), the PVR reg is read out to find out if the workaround must be
applied or not.
Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com>
Signed-off-by: Scott Wood <oss@buserror.net>
Because of integer computation rounding in u-boot (that sets the QE
brg-frequency DTS prop), the clk value is 99999999 Hz even though it is
100 MHz.
When setting brg clks that are exact divisors of 100 MHz, this small
differnce plays a role and can result in lower clks to be output (for
instance 20 MHz - divide by 5 - results in 16.666 MHz - divide by 6).
This patch fixes that by "forcing" the brg_clk to the nearest kHz when
the difference is below 2 integer rounding errors (i.e. 4).
Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com>
Signed-off-by: Scott Wood <oss@buserror.net>
immrbar_virt_to_phys() is not used anymore
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Acked-by: Li Yang <pku.leo@gmail.com>
Signed-off-by: Scott Wood <oss@buserror.net>
ARMv7 and ARMv8.
-----BEGIN PGP SIGNATURE-----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=Wfmu
-----END PGP SIGNATURE-----
Merge tag 'samsung-drivers-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/drivers
Samsung SoC drivers update for v4.12 - split building of the PMU driver between
ARMv7 and ARMv8.
* tag 'samsung-drivers-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
soc: samsung: Do not build ARMv7 PMU drivers on ARMv8
Signed-off-by: Olof Johansson <olof@lixom.net>
* Add support for R-Car H3 ES2.0
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=m+ef
-----END PGP SIGNATURE-----
Merge tag 'renesas-sysc-for-v4.12' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/drivers
Renesas ARM Based SoC Sysc Updates for v4.12
* Add support for R-Car H3 ES2.0
* tag 'renesas-sysc-for-v4.12' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
soc: renesas: rcar-sysc: Add support for R-Car H3 ES2.0
soc: renesas: rcar-sysc: Add support for fixing up power area tables
soc: renesas: Register SoC device early
base: soc: Allow early registration of a single SoC device
base: soc: Let soc_device_match() return no match when called too early
Signed-off-by: Olof Johansson <olof@lixom.net>
It includes a couple of small cleanups on zx296718 power domain drivers.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJY65viAAoJEFBXWFqHsHzOkqAH/ig7pVmp3s0H/4xmY3fKOpk2
R2FGXNSWSLyKt+jkQfTKfsQZmaGadefg6KUzXLuBdE306LZkZssmjLqBEv3LBGYE
oC+q29Y8S/qb3g1c+B2fMPO1MSfQWRGKgaKUOdDiFw7lBCBplsv2gzntW8aSSpi1
eNraNzpmaesSVUNPrO4uTwRNmvn9mx00k5H2OJWSnyMtFQzo+FDbpj1ULgMfLeLl
j6Jnszsp98STkB3Kzc9XGwO8OlHlsr/nnVvJVWJGiyFhwVTncGwLe9gL3ZqFxRYr
SjE4Z28xkHcajQBmYmA0SkNHdtERjKxzjYQo9nYP7/rI3kL5r12+iWU7Q29B0ck=
=JWPf
-----END PGP SIGNATURE-----
Merge tag 'zte-drivers-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/drivers
ZTE driver updates for 4.12:
It includes a couple of small cleanups on zx296718 power domain drivers.
* tag 'zte-drivers-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
soc: zte: pm_domains: Remove .owner field for driver
soc: zte: pm_domains: Remove redundant dev_err call in zx2967_pd_probe()
Signed-off-by: Olof Johansson <olof@lixom.net>
- A series from Lucas Stach which partly rewrites the imx gpc driver
to support multiple power domains, and moves the related code from
imx platform into drivers folder.
- A series from Dong Aisheng which fixes the issues with Lucas' code
changes and improves things.
- Add workaround for i.MX6QP hardware erratum ERR009619 that is PRE
clocks may be stalled during the power up sequencing of the PU power
domain.
- Add imx-gpcv2 driver to support power domains managed by GPCv2 IP
block found on i.MX7 series of SoCs.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJY6zd4AAoJEFBXWFqHsHzODtoH/jwTFRhAhfKG2wfplkP+U4HT
gijXHDybebRGll2voGAL7YX7GPhLcy0NSGdiK/ckTtHlvR4E2uxcwaIwzXIE1CTb
MXfv7p+3FXhjcqgbvl122hnLAMWOYjcbH3tFzBy1jlpGp9oEmHx4OtpdlgyD5GJ7
+En6aDtbU0g8aJg9ldZfO8iSAJz1CAqpap+FRjpcPX4xXflOQwQfxJNWuDeg75k6
U3zB2r+lbmjIfohUHWAnHsU2Jf4WPrBrjVsj/1YsiE5rMNPfxAEPYSQJAumG7JtO
qTPWf3qJnSyrWBscPRR3Fs//11IgXZXSCWBPBZjng0ELFS3Rkdvp87etjZraSjU=
=Sypm
-----END PGP SIGNATURE-----
Merge tag 'imx-drivers-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/drivers
i.MX drivers updates for 4.12:
- A series from Lucas Stach which partly rewrites the imx gpc driver
to support multiple power domains, and moves the related code from
imx platform into drivers folder.
- A series from Dong Aisheng which fixes the issues with Lucas' code
changes and improves things.
- Add workaround for i.MX6QP hardware erratum ERR009619 that is PRE
clocks may be stalled during the power up sequencing of the PU power
domain.
- Add imx-gpcv2 driver to support power domains managed by GPCv2 IP
block found on i.MX7 series of SoCs.
* tag 'imx-drivers-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
soc: imx: gpc: add workaround for i.MX6QP to the GPC PD driver
dt-bindings: imx-gpc: add i.MX6 QuadPlus compatible
soc: imx: gpc: add defines for domain index
soc: imx: Add GPCv2 power gating driver
dt-bindings: Add GPCv2 power gating driver
soc: imx: gpc: remove unnecessary readable_reg callback
dt-bindings: imx-gpc: correct the DOMAIN_INDEX using
soc: imx: gpc: keep PGC_X_CTRL name align with reference manual
soc: imx: gpc: fix comment when power up domain
soc: imx: gpc: fix imx6sl gpc power domain regression
soc: imx: gpc: fix domain_index sanity check issue
soc: imx: gpc: fix the wrong using of regmap cache
soc: imx: gpc: fix gpc clk get error handling
soc: imx: move PGC handling to a new GPC driver
dt-bindings: add multidomain support to i.MX GPC DT binding
Signed-off-by: Olof Johansson <olof@lixom.net>
This contains PMC support for Tegra186 as well as a proper driver for
the flow controller found on SoCs up to Tegra210. This also turns the
fuse driver into an explicitly non-modular driver.
-----BEGIN PGP SIGNATURE-----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=n4aM
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-4.12-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/drivers
soc/tegra: Core SoC changes for v4.12-rc1
This contains PMC support for Tegra186 as well as a proper driver for
the flow controller found on SoCs up to Tegra210. This also turns the
fuse driver into an explicitly non-modular driver.
* tag 'tegra-for-4.12-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
soc/tegra: Add initial flowctrl support for Tegra132/210
soc/tegra: flowctrl: Add basic platform driver
soc/tegra: Move Tegra flowctrl driver
ARM: tegra: Remove unnecessary inclusion of flowctrl header
soc: tegra: make fuse-tegra explicitly non-modular
soc/tegra: Fix link errors with PMC disabled
soc/tegra: Implement Tegra186 PMC support
Signed-off-by: Olof Johansson <olof@lixom.net>
