This code (CONFIG_LOCKDEP_CROSSRELEASE=y and CONFIG_LOCKDEP_COMPLETIONS=y),
while it found a number of old bugs initially, was also causing too many
false positives that caused people to disable lockdep - which is arguably
a worse overall outcome.
If we disable cross-release by default but keep the code upstream then
in practice the most likely outcome is that we'll allow the situation
to degrade gradually, by allowing entropy to introduce more and more
false positives, until it overwhelms maintenance capacity.
Another bad side effect was that people were trying to work around
the false positives by uglifying/complicating unrelated code. There's
a marked difference between annotating locking operations and
uglifying good code just due to bad lock debugging code ...
This gradual decrease in quality happened to a number of debugging
facilities in the kernel, and lockdep is pretty complex already,
so we cannot risk this outcome.
Either cross-release checking can be done right with no false positives,
or it should not be included in the upstream kernel.
( Note that it might make sense to maintain it out of tree and go through
the false positives every now and then and see whether new bugs were
introduced. )
Cc: Byungchul Park <byungchul.park@lge.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This reverts commit 7a9618a22a.
Romain Izard recently reported that commit 7a9618a22a ended up
allowing every legacy gadget driver to statically linked to the
kernel, however that doesn't work, since only one legacy gadget can be
bound to a controller. Because of that, let's revert the original commit
and fix the problem.
Reported-by: Romain Izard <romain.izard.pro@gmail.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Configuring the USB_G_WEBCAM driver as built-in leads to a link
error when CONFIG_VIDEO_V4L2 is a loadable module:
drivers/usb/gadget/function/f_uvc.o: In function `uvc_function_setup':
f_uvc.c:(.text+0xfe): undefined reference to `v4l2_event_queue'
drivers/usb/gadget/function/f_uvc.o: In function `uvc_function_ep0_complete':
f_uvc.c:(.text+0x188): undefined reference to `v4l2_event_queue'
This changes the Kconfig dependency to disallow that configuration,
and force it to be a module in that case as well.
This is apparently a rather old bug, but very hard to trigger
even in thousands of randconfig builds.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
When CONFIG_GENERIC_LOCKBEAK=y, locking structures grow an extra int ->break_lock
field which is used to implement raw_spin_is_contended() by setting the field
to 1 when waiting on a lock and clearing it to zero when holding a lock.
However, there are a few problems with this approach:
- There is a write-write race between a CPU successfully taking the lock
(and subsequently writing break_lock = 0) and a waiter waiting on
the lock (and subsequently writing break_lock = 1). This could result
in a contended lock being reported as uncontended and vice-versa.
- On machines with store buffers, nothing guarantees that the writes
to break_lock are visible to other CPUs at any particular time.
- READ_ONCE/WRITE_ONCE are not used, so the field is potentially
susceptible to harmful compiler optimisations,
Consequently, the usefulness of this field is unclear and we'd be better off
removing it and allowing architectures to implement raw_spin_is_contended() by
providing a definition of arch_spin_is_contended(), as they can when
CONFIG_GENERIC_LOCKBREAK=n.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Sebastian Ott <sebott@linux.vnet.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1511894539-7988-3-git-send-email-will.deacon@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Commit:
a8a217c221 ("locking/core: Remove {read,spin,write}_can_lock()")
removed the definition of raw_spin_can_lock(), causing the GENERIC_LOCKBREAK
spin_lock() routines to poll the ->break_lock field when waiting on a lock.
This has been reported to cause a deadlock during boot on s390, because
the ->break_lock field is also set by the waiters, and can potentially
remain set indefinitely if no other CPUs come in to take the lock after
it has been released.
This patch removes the explicit spinning on ->break_lock from the waiters,
instead relying on the outer trylock() operation to determine when the
lock is available.
Reported-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Tested-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: a8a217c221 ("locking/core: Remove {read,spin,write}_can_lock()")
Link: http://lkml.kernel.org/r/1511894539-7988-2-git-send-email-will.deacon@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Avoid that scsi_show_rq() triggers a NULL pointer dereference if called
after sd_uninit_command(). Swap the NULL pointer assignment and the
mempool_free() call in sd_uninit_command() to make it less likely that
scsi_show_rq() triggers a use-after-free. Note: even with these changes
scsi_show_rq() can trigger a use-after-free but that's a lesser evil
than e.g. suppressing debug information for T10 PI Type 2 commands
completely. This patch fixes the following oops:
BUG: unable to handle kernel NULL pointer dereference at (null)
IP: scsi_format_opcode_name+0x1a/0x1c0
CPU: 1 PID: 1881 Comm: cat Not tainted 4.14.0-rc2.blk_mq_io_hang+ #516
Call Trace:
__scsi_format_command+0x27/0xc0
scsi_show_rq+0x5c/0xc0
__blk_mq_debugfs_rq_show+0x116/0x130
blk_mq_debugfs_rq_show+0xe/0x10
seq_read+0xfe/0x3b0
full_proxy_read+0x54/0x90
__vfs_read+0x37/0x160
vfs_read+0x96/0x130
SyS_read+0x55/0xc0
entry_SYSCALL_64_fastpath+0x1a/0xa5
[mkp: added Type 2]
Fixes: 0eebd005dd ("scsi: Implement blk_mq_ops.show_rq()")
Reported-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: James E.J. Bottomley <jejb@linux.vnet.ibm.com>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Cc: stable@vger.kernel.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
fcoe-devel@open-fcoe.org is defunct and all patches are routed via the
SCSI tree anyways.
So update MAINTAINERS accordingly.
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The return value of smp_execute_task_sg() is the untransferred residual,
but bsg_job_done() requires the length of payload received. This makes
SMP passthrough commands from userland by sg ioctl to libsas get a wrong
response. The userland tools such as smp_utils failed because of these
wrong responses:
~#smp_discover /dev/bsg/expander-2\:13
response too short, len=0
~#smp_discover /dev/bsg/expander-2\:134
response too short, len=0
Fix this by passing the actual received length to bsg_job_done(). And if
smp_execute_task_sg() returns 0, this means received length is exactly
the buffer length.
[mkp: typo]
Fixes: 651a013649 ("scsi: scsi_transport_sas: switch to bsg-lib for SMP passthrough")
Cc: <stable@vger.kernel.org> # v4.14+
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Reported-by: chenqilin <chenqilin2@huawei.com>
Tested-by: chenqilin <chenqilin2@huawei.com>
CC: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This allocation won't fail in the current kernel because it's small but
not checking for kmalloc() failures introduces static checker warnings
so let's fix it.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Mario Limonciello <mario.limonciello@dell.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
Sending the switch state change twice within the same frame is invalid
evdev protocol and only works if the client handles keys immediately as
well. Processing events immediately is incorrect, it forces a fake
order of events that does not exist on the device.
Recent versions of libinput changed to only process the device state and
SYN_REPORT time, so now the key event is lost.
https://bugs.freedesktop.org/show_bug.cgi?id=104041
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
This machine reports number of keyboard backlight led levels, instead of
value of the last led level index. Therefore max_brightness properly needs
to be subtracted by 1 to match led max_brightness API.
Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Reported-by: Gabriel M. Elder <gabriel@tekgnowsys.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=196913
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
Pull percpu fix from Tejun Heo:
"Just one patch to work around CRIS boot problem caused by a recent
change which freed a temporary boot data structure. The root cause is
on CRIS side but it doesn't seem trivial to fix. For now, work around
by skipping freeing on CRIS"
* 'for-4.15-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu:
percpu: hack to let the CRIS architecture to boot until they clean up
Pull cgroup fixes from Tejun Heo:
- Prateek posted a couple patches to fix a deadlock involving cpuset
and workqueue. It unfortunately caused a different deadlock and the
recent workqueue hotplug simplification removed the original
deadlock, so Prateek's two patches are reverted for now.
- The new stat code was missing u64_stats initialization. Fixed.
- Doc and other misc changes
* 'for-4.15-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: add warning about RT not being supported on cgroup2
Revert "cgroup/cpuset: remove circular dependency deadlock"
Revert "cpuset: Make cpuset hotplug synchronous"
cgroup: properly init u64_stats
debug cgroup: use task_css_set instead of rcu_dereference
cpuset: Make cpuset hotplug synchronous
cgroup/cpuset: remove circular dependency deadlock
Pull workqueue fixes from Tejun Heo:
- Lai's hotplug simplifications inadvertently fix a possible deadlock
involving cpuset and workqueue
- CPU isolation fix which was reverted due to the changes in the
housekeeping code resurrected
- A trivial unused include removal
* 'for-4.15-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: remove unneeded kallsyms include
workqueue/hotplug: remove the workaround in rebind_workers()
workqueue/hotplug: simplify workqueue_offline_cpu()
workqueue: respect isolated cpus when queueing an unbound work
main: kernel_start: move housekeeping_init() before workqueue_init_early()
Pull libata fixes from Tejun Heo:
"Nothing too interesting. David Milburn improved a corner case
misbehavior during hotplug. Other than that, minor driver-specific
fixes"
* 'for-4.15-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
libata: sata_down_spd_limit should return if driver has not recorded sstatus speed
ahci: mtk: Change driver name to ahci-mtk
ahci: qoriq: refine port register configuration
pata_pdc2027x : make pdc2027x_*_timing structures const
pata_pdc2027x: Remove unnecessary error check
ata: mediatek: Fix typo in module description
have been in for-next for a while, each since about their creation
date. I forgot the bugzilla reference on the second one (ipmi_si: Fix
oops with PCI devices) so I rebased to add that.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=3M4K
-----END PGP SIGNATURE-----
Merge tag 'for-linus-4.15-2' of git://github.com/cminyard/linux-ipmi
Pull IPMI fixes from Corey Minyard.
* tag 'for-linus-4.15-2' of git://github.com/cminyard/linux-ipmi:
ipmi_si: fix crash on parisc
ipmi_si: Fix oops with PCI devices
ipmi: Stop timers before cleaning up the module
Pull crypto fixes from Herbert Xu:
"This push fixes the following issues:
- buffer overread in RSA
- potential use after free in algif_aead.
- error path null pointer dereference in af_alg
- forbid combinations such as hmac(hmac(sha3)) which may crash
- crash in salsa20 due to incorrect API usage"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: salsa20 - fix blkcipher_walk API usage
crypto: hmac - require that the underlying hash algorithm is unkeyed
crypto: af_alg - fix NULL pointer dereference in
crypto: algif_aead - fix reference counting of null skcipher
crypto: rsa - fix buffer overread when stripping leading zeroes
Only insert our special drain CQEs to support ib_drain_sq/rq() after
the wq is flushed. Otherwise, existing but not yet polled CQEs can be
returned out of order to the user application. This can happen when the
QP has exited RTS but not yet flushed the QP, which can happen during
a normal close (vs abortive close).
In addition never count the drain CQEs when determining how many CQEs
need to be synthesized during the flush operation. This latter issue
should never happen if the QP is properly flushed before inserting the
drain CQE, but I wanted to avoid corrupting the CQ state. So we handle
it and log a warning once.
Fixes: 4fe7c2962e ("iw_cxgb4: refactor sq/rq drain logic")
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
On a ppc64 machine, when mounting a fuzzed ext2 image (generated by
fsfuzzer) the following call trace is seen,
VFS: brelse: Trying to free free buffer
WARNING: CPU: 1 PID: 6913 at /root/repos/linux/fs/buffer.c:1165 .__brelse.part.6+0x24/0x40
.__brelse.part.6+0x20/0x40 (unreliable)
.ext4_find_entry+0x384/0x4f0
.ext4_lookup+0x84/0x250
.lookup_slow+0xdc/0x230
.walk_component+0x268/0x400
.path_lookupat+0xec/0x2d0
.filename_lookup+0x9c/0x1d0
.vfs_statx+0x98/0x140
.SyS_newfstatat+0x48/0x80
system_call+0x58/0x6c
This happens because the directory that ext4_find_entry() looks up has
inode->i_size that is less than the block size of the filesystem. This
causes 'nblocks' to have a value of zero. ext4_bread_batch() ends up not
reading any of the directory file's blocks. This renders the entries in
bh_use[] array to continue to have garbage data. buffer_uptodate() on
bh_use[0] can then return a zero value upon which brelse() function is
invoked.
This commit fixes the bug by returning -ENOENT when the directory file
has no associated blocks.
Reported-by: Abdul Haleem <abdhalee@linux.vnet.ibm.com>
Signed-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Cc: stable@vger.kernel.org
guehdr struct is used to build or parse gue packets, which
are always in big endian. It's better to define all guehdr
members as __beXX types.
Also, in validate_gue_flags it's not good to use a __be32
variable for both Standard flags(__be16) and Private flags
(__be32), and pass it to other funcions.
This patch could fix a bunch of sparse warnings from fou.
Fixes: 5024c33ac3 ("gue: Add infrastructure for flags and options")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Now in sctp_setsockopt_reset_streams, it only does the check
optlen < sizeof(*params) for optlen. But it's not enough, as
params->srs_number_streams should also match optlen.
If the streams in params->srs_stream_list are less than stream
nums in params->srs_number_streams, later when dereferencing
the stream list, it could cause a slab-out-of-bounds crash, as
reported by syzbot.
This patch is to fix it by also checking the stream numbers in
sctp_setsockopt_reset_streams to make sure at least it's not
greater than the streams in the list.
Fixes: 7f9d68ac94 ("sctp: implement sender-side procedures for SSN Reset Request Parameter")
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
inet->hdrincl is racy, and could lead to uninitialized stack pointer
usage, so its value should be read only once.
Fixes: c008ba5bdc ("ipv4: Avoid reading user iov twice after raw_probe_proto_opt")
Signed-off-by: Mohamed Ghannam <simo.ghannam@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If mtools.conf is not generated before, 'make isoimage' could complain:
Kernel: arch/x86/boot/bzImage is ready (#597)
GENIMAGE arch/x86/boot/image.iso
*** Missing file: arch/x86/boot/mtools.conf
arch/x86/boot/Makefile:144: recipe for target 'isoimage' failed
mtools.conf is not used for isoimage generation, so do not check it.
Signed-off-by: Changbin Du <changbin.du@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 4366d57af1 ("x86/build: Factor out fdimage/isoimage generation commands to standalone script")
Link: http://lkml.kernel.org/r/1512053480-8083-1-git-send-email-changbin.du@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Currently, a nlmon link inside a child namespace can observe systemwide
netlink activity. Filter the traffic so that nlmon can only sniff
netlink messages from its own netns.
Test case:
vpnns -- bash -c "ip link add nlmon0 type nlmon; \
ip link set nlmon0 up; \
tcpdump -i nlmon0 -q -w /tmp/nlmon.pcap -U" &
sudo ip xfrm state add src 10.1.1.1 dst 10.1.1.2 proto esp \
spi 0x1 mode transport \
auth sha1 0x6162633132330000000000000000000000000000 \
enc aes 0x00000000000000000000000000000000
grep --binary abc123 /tmp/nlmon.pcap
Signed-off-by: Kevin Cernekee <cernekee@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Not all variants of the sh_eth hardware have Gigabit
support. Unfortunately, the current driver doesn't tell the PHY about
the limited MAC capabilities. Due to this, if you have a Gigabit
capable PHY, the PHY will advertise its Gigabit capability and
establish a link at 1Gbit/s, even though the MAC doesn't support it.
In order to avoid this, we use the recently introduced
phy_set_max_speed() to tell the PHY to not advertise speed higher than
100 MBit/s.
Tested on a SH7786 platform, with a Gigabit PHY.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The purpose of this change is to fix the incorrect detection of the link
partner (LP) advertised capabilities which sometimes happens with this PHY
(roughly 1 time in a dozen)
This issue may cause the link to be negotiated at 10Mbps/Full or
10Mbps/Half when 100MBps/Full is actually possible. In some case, the link
is even completely broken and no communication is possible.
To detect the corruption, we must look for a magic undocumented bit in the
WOL bank (hint given by the SoC vendor kernel) but this is not enough to
cover all cases. We also have to look at the LPA ack. If the LP supports
Aneg but did not ack our base code when aneg is completed, we assume
something went wrong.
The detection of a corrupted LPA triggers a restart of the aneg process.
This solves the problem but may take up to 6 retries to complete.
Fixes: 7334b3e47a ("net: phy: Add Meson GXL Internal PHY driver")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
On systems with hardware dirty bit management, the ltp madvise09 unit
test fails due to dirty bit information being lost and pages being
incorrectly freed.
This was bisected to:
arm64: Ignore hardware dirty bit updates in ptep_set_wrprotect()
Reverting this commit leads to a separate problem, that the unit test
retains pages that should have been dropped due to the function
madvise_free_pte_range(.) not cleaning pte's properly.
Currently pte_mkclean only clears the software dirty bit, thus the
following code sequence can appear:
pte = pte_mkclean(pte);
if (pte_dirty(pte))
// this condition can return true with HW DBM!
This patch also adjusts pte_mkclean to set PTE_RDONLY thus effectively
clearing both the SW and HW dirty information.
In order for this to function on systems without HW DBM, we need to
also adjust pte_mkdirty to remove the read only bit from writable pte's
to avoid infinite fault loops.
Cc: <stable@vger.kernel.org>
Fixes: 64c26841b3 ("arm64: Ignore hardware dirty bit updates in ptep_set_wrprotect()")
Reported-by: Bhupinder Thakur <bhupinder.thakur@linaro.org>
Tested-by: Bhupinder Thakur <bhupinder.thakur@linaro.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Steve Capper <steve.capper@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
The high_memory global variable is used by
cma_declare_contiguous(.) before it is defined.
We don't notice this as we compute __pa(high_memory - 1), and it looks
like we're processing a VA from the direct linear map.
This problem becomes apparent when we flip the kernel virtual address
space and the linear map is moved to the bottom of the kernel VA space.
This patch moves the initialisation of high_memory before it used.
Cc: <stable@vger.kernel.org>
Fixes: f7426b983a ("mm: cma: adjust address limit to avoid hitting low/high memory boundary")
Signed-off-by: Steve Capper <steve.capper@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
After commit 4d3a57f23d ("netfilter: conntrack: do not enable connection
tracking unless needed") conntrack is disabled by default unless some
module explicitly declares dependency in particular network namespace.
Fixes: a357b3f80b ("netfilter: nat: add dependencies on conntrack module")
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Users of ptr_ring expect that it's safe to give the
data structure a pointer and have it be available
to consumers, but that actually requires an smb_wmb
or a stronger barrier.
In absence of such barriers and on architectures that reorder writes,
consumer might read an un=initialized value from an skb pointer stored
in the skb array. This was observed causing crashes.
To fix, add memory barriers. The barrier we use is a wmb, the
assumption being that producers do not need to read the value so we do
not need to order these reads.
Reported-by: George Cherian <george.cherian@cavium.com>
Suggested-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is code that probably should never have made it into the kernel in
the first place: it depends on a driver that hadn't been reviewed yet.
During the HVC_SBI_RISCV review process a better way of doing this was
suggested, but that means this code is defunct. It's compile-time
disabled in 4.15 because the driver isn't in, so I think it's safe to
just remove this for now.
CC: Greg KH <gregkh@linuxfoundation.org>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
I removed this last week because of an incorrect comment:
smp_mb__after_spinlock() is actually still used, and is necessary on
RISC-V. It's been resurrected, with a comment that describes what it
actually does this time. Thanks to Andrea for finding the bug!
Fixes: 3343eb6806 ("RISC-V: Remove smb_mb__{before,after}_spinlock()")
CC: Andrea Parri <parri.andrea@gmail.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
In the current code, there is a ! logical NOT where a bitwise ~ NOT was
intended. It means that we never return -EINVAL.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
The filw was converted from print_symbol() to %pf some time
ago (044c782ce3 "workqueue: fix checkpatch issues").
kallsyms does not seem to be needed anymore.
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Fix the following kernel-doc warnings after code restructuring:
../kernel/sched/core.c:5113: warning: No description found for parameter 't'
../kernel/sched/core.c:5113: warning: Excess function parameter 'interval' description in 'sched_rr_get_interval'
get rid of set_fs()")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: abca5fc535 ("sched_rr_get_interval(): move compat to native,
Link: http://lkml.kernel.org/r/995c6ded-b32e-bbe4-d9f5-4d42d121aff1@infradead.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
* for certificate C file generation, don't use hexdump as it's
not always installed by default, use pure posix instead (od/sed)
* for certificate C file generation, don't write the file if
anything fails, so the build abort will not cause a bad build
upon a second attempt
* fix locking in ieee80211_sta_tear_down_BA_sessions() which had
been causing lots of locking warnings
-----BEGIN PGP SIGNATURE-----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=Mgd9
-----END PGP SIGNATURE-----
Merge tag 'mac80211-for-davem-2017-12-11' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
Johannes Berg says:
====================
Three fixes:
* for certificate C file generation, don't use hexdump as it's
not always installed by default, use pure posix instead (od/sed)
* for certificate C file generation, don't write the file if
anything fails, so the build abort will not cause a bad build
upon a second attempt
* fix locking in ieee80211_sta_tear_down_BA_sessions() which had
been causing lots of locking warnings
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
If something calls ioremap() with an address not aligned to PAGE_SIZE, the
returned address might be not aligned as well. This led to a probe
registered on exactly the returned address, but the entire page was armed
for mmiotracing.
On calling iounmap() the address passed to unregister_kmmio_probe() was
PAGE_SIZE aligned by the caller leading to a complete freeze of the
machine.
We should always page align addresses while (un)registerung mappings,
because the mmiotracer works on top of pages, not mappings. We still keep
track of the probes based on their real addresses and lengths though,
because the mmiotrace still needs to know what are mapped memory regions.
Also move the call to mmiotrace_iounmap() prior page aligning the address,
so that all probes are unregistered properly, otherwise the kernel ends up
failing memory allocations randomly after disabling the mmiotracer.
Tested-by: Lyude <lyude@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Acked-by: Pekka Paalanen <ppaalanen@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: nouveau@lists.freedesktop.org
Link: http://lkml.kernel.org/r/20171127075139.4928-1-kherbst@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
earlyprintk=efi,keep does not work any more with a warning
in mm/early_ioremap.c: WARN_ON(system_state != SYSTEM_BOOTING):
Boot just hangs because of the earlyprintk within the earlyprintk
implementation code itself.
This is caused by a new introduced middle state in:
69a78ff226 ("init: Introduce SYSTEM_SCHEDULING state")
early_ioremap() is fine in both SYSTEM_BOOTING and SYSTEM_SCHEDULING
states, original condition should be updated accordingly.
Signed-off-by: Dave Young <dyoung@redhat.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: bp@suse.de
Cc: linux-efi@vger.kernel.org
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20171209041610.GA3249@dhcp-128-65.nay.redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This patch fixes ipmi crash on parisc introduced in the kernel 4.15-rc.
The pointer io.io_setup is not initialized and thus it causes crash in
try_smi_init when attempting to call new_smi->io.io_setup.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
When the IPMI PCI code was split out, some code was consolidated for
setting the io_setup field in the io structure. The PCI code needed
this set before registration to probe register spacing, though, so
restore the old code for that function.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=197999
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Tested-by: Meelis Roos <mroos@linux.ee>
Middle-layer code doing suspend-time optimizations for devices with
the DPM_FLAG_SMART_SUSPEND flag set (currently, the PCI bus type and
the ACPI PM domain) needs to make the core skip ->thaw_early and
->thaw callbacks for those devices in some cases and it sets the
power.direct_complete flag for them for this purpose.
However, it turns out that setting power.direct_complete outside of
the PM core is a bad idea as it triggers an excess invocation of
pm_runtime_enable() in device_resume().
For this reason, provide a helper to clear power.is_late_suspended
and power.is_suspended to be invoked by the middle-layer code in
question instead of setting power.direct_complete and make that code
call the new helper.
Fixes: c4b65157ae (PCI / PM: Take SMART_SUSPEND driver flag into account)
Fixes: 05087360fd (ACPI / PM: Take SMART_SUSPEND driver flag into account)
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
In host mode reading from DPTXSIZn returning invalid value in
dwc2_check_param_tx_fifo_sizes function.
In total TxFIFO size calculations unnecessarily reducing by ep_info.
hw->total_fifo_size can be fully allocated for FIFO's.
Added num_dev_in_eps member in dwc2_hw_params structure to save number
of IN EPs.
Added g_tx_fifo_size array in dwc2_hw_params structure to store power
on reset values of DPTXSIZn registers in forced device mode.
Updated dwc2_hsotg_tx_fifo_count() function to get TxFIFO count from
num_dev_in_eps.
Updated dwc2_get_dev_hwparams() function to store DPTXFSIZn in
g_tx_fifo_size array.
dwc2_get_host/dev_hwparams() functions call moved after num_dev_in_eps
set from hwcfg4.
Modified dwc2_check_param_tx_fifo_sizes() function to check TxFIFOn
sizes based on g_tx_fifo_size array.
Removed ep_info subtraction during calculation of tx_addr_max in
dwc2_hsotg_tx_fifo_total_depth() function. Also removed
dwc2_hsotg_ep_info_size() function as no more need.
Acked-by: John Youn <johnyoun@synopsys.com>
Signed-off-by: Gevorg Sahakyan <sahakyan@synopsys.com>
Signed-off-by: Minas Harutyunyan <hminas@synopsys.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
For isochronous endpoints with ep->mult less than 3, PCM1 value of
trb->size in set incorrectly.
For ep->mult = 2, this is set to 0/-1 and for ep->mult = 1, this is
set to -2. This is because the initial mult is set to ep->mult - 1
instead of 2.
Signed-off-by: Manu Gautam <mgautam@codeaurora.org>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
dwc3_of_simple_dev_pm_ops has never been used since the initial support
by commit 16adc674d0 ("usb: dwc3: add generic OF glue layer").
I guess it just missed to set .pm struct member.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
If of_clk_get() fails, the clean-up of already initialized clocks should be
the same as when clk_prepare_enable() fails. Thus a clk_disable_unprepare()
for each clock should be called before the clk_put().
Found by Linux Driver Verification project (linuxtesting.org).
Fixes: 16adc674d0 ("usb: dwc3: ep0: fix setup_packet_pending initialization")
Signed-off-by: Andreas Platschek <andreas.platschek@opentech.at>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Fix ptr_ret.cocci warnings:
fs/overlayfs/overlayfs.h:179:11-17: WARNING: PTR_ERR_OR_ZERO can be used
Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR
Generated by: scripts/coccinelle/api/ptr_ret.cocci
Signed-off-by: Vasyl Gomonovych <gomonovych@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
