We have many loops iterating over all of the end port numbers on a struct
ib_device, simplify them with a for_each helper.
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Keeping single line wrapper functions is not useful. Hence remove the
ib_sg_dma_address() and ib_sg_dma_len() functions. This patch does not
change any functionality.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The default behavior of the SCSI core is to set the block layer request
queue parameter max_segment_size to 64 KB. That means that elements of
scatterlists are limited to 64 KB. Since RDMA adapters support larger
sizes, increase max_segment_size for the SRP initiator.
Notes:
- The SCSI max_segment_size parameter was introduced in kernel v5.0. See
also commit 50c2e9107f ("scsi: introduce a max_segment_size
host_template parameters").
- Some other block drivers already set max_segment_size to UINT_MAX,
e.g. nbd and rbd.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
One of the more common cases of allocation size calculations is finding the
size of a structure that has a zero-sized array at the end, along with memory
for some number of elements for that array. For example:
struct foo {
int stuff;
void *entry[];
};
instance = kzalloc(sizeof(struct foo) + sizeof(void *) * count, GFP_KERNEL);
Instead of leaving these open-coded and prone to type mistakes, we can now
use the new struct_size() helper:
instance = kzalloc(struct_size(instance, entry, count), GFP_KERNEL);
This code was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This has been a fairly typical cycle, with the usual sorts of driver
updates. Several series continue to come through which improve and
modernize various parts of the core code, and we finally are starting to
get the uAPI command interface cleaned up.
- Various driver fixes for bnxt_re, cxgb3/4, hfi1, hns, i40iw, mlx4, mlx5,
qib, rxe, usnic
- Rework the entire syscall flow for uverbs to be able to run over
ioctl(). Finally getting past the historic bad choice to use write()
for command execution
- More functional coverage with the mlx5 'devx' user API
- Start of the HFI1 series for 'TID RDMA'
- SRQ support in the hns driver
- Support for new IBTA defined 2x lane widths
- A big series to consolidate all the driver function pointers into
a big struct and have drivers provide a 'static const' version of the
struct instead of open coding initialization
- New 'advise_mr' uAPI to control device caching/loading of page tables
- Support for inline data in SRPT
- Modernize how umad uses the driver core and creates cdev's and sysfs
files
- First steps toward removing 'uobject' from the view of the drivers
-----BEGIN PGP SIGNATURE-----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=T0p1
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
"This has been a fairly typical cycle, with the usual sorts of driver
updates. Several series continue to come through which improve and
modernize various parts of the core code, and we finally are starting
to get the uAPI command interface cleaned up.
- Various driver fixes for bnxt_re, cxgb3/4, hfi1, hns, i40iw, mlx4,
mlx5, qib, rxe, usnic
- Rework the entire syscall flow for uverbs to be able to run over
ioctl(). Finally getting past the historic bad choice to use
write() for command execution
- More functional coverage with the mlx5 'devx' user API
- Start of the HFI1 series for 'TID RDMA'
- SRQ support in the hns driver
- Support for new IBTA defined 2x lane widths
- A big series to consolidate all the driver function pointers into a
big struct and have drivers provide a 'static const' version of the
struct instead of open coding initialization
- New 'advise_mr' uAPI to control device caching/loading of page
tables
- Support for inline data in SRPT
- Modernize how umad uses the driver core and creates cdev's and
sysfs files
- First steps toward removing 'uobject' from the view of the drivers"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (193 commits)
RDMA/srpt: Use kmem_cache_free() instead of kfree()
RDMA/mlx5: Signedness bug in UVERBS_HANDLER()
IB/uverbs: Signedness bug in UVERBS_HANDLER()
IB/mlx5: Allocate the per-port Q counter shared when DEVX is supported
IB/umad: Start using dev_groups of class
IB/umad: Use class_groups and let core create class file
IB/umad: Refactor code to use cdev_device_add()
IB/umad: Avoid destroying device while it is accessed
IB/umad: Simplify and avoid dynamic allocation of class
IB/mlx5: Fix wrong error unwind
IB/mlx4: Remove set but not used variable 'pd'
RDMA/iwcm: Don't copy past the end of dev_name() string
IB/mlx5: Fix long EEH recover time with NVMe offloads
IB/mlx5: Simplify netdev unbinding
IB/core: Move query port to ioctl
RDMA/nldev: Expose port_cap_flags2
IB/core: uverbs copy to struct or zero helper
IB/rxe: Reuse code which sets port state
IB/rxe: Make counters thread safe
IB/mlx5: Use the correct commands for UMEM and UCTX allocation
...
Request permission to send immediate data during login. If the SRP
target grants this request, send the payload of write requests <= 8 KB
as immediate data.
Cc: Sergey Gorenko <sergeygo@mellanox.com>
Cc: Max Gurtovoy <maxg@mellanox.com>
Cc: Laurence Oberman <loberman@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Move the maximum initiator to target information unit length parameter
from struct srp_target_port into struct srp_rdma_ch. This patch does
not change any functionality but makes the next patch easier to read.
Cc: Sergey Gorenko <sergeygo@mellanox.com>
Cc: Max Gurtovoy <maxg@mellanox.com>
Cc: Laurence Oberman <loberman@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Since srp_rdma_ch.max_ti_iu_len is used in the hot path, move it to the
section with data structure members used in the hot path.
Cc: Sergey Gorenko <sergeygo@mellanox.com>
Cc: Max Gurtovoy <maxg@mellanox.com>
Cc: Laurence Oberman <loberman@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch avoids that the SCSI mid-layer keeps retrying forever if
ib_post_send() fails. This was discovered while testing immediate
data support and passing a too large num_sge value to ib_post_send().
Cc: Sergey Gorenko <sergeygo@mellanox.com>
Cc: Max Gurtovoy <maxg@mellanox.com>
Cc: Laurence Oberman <loberman@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Reserve additional space for CDBs that contain more than sixteen bytes
and set the add_cdb_len field for such CDBs as required. From the SRP
standard: "The ADDITIONAL CDB LENGTH field contains the length in
dwords of the ADDITIONAL CDB field."
Cc: Sergey Gorenko <sergeygo@mellanox.com>
Cc: Max Gurtovoy <maxg@mellanox.com>
Cc: Laurence Oberman <loberman@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch avoids that a warning is reported when building with W=1.
Cc: Sergey Gorenko <sergeygo@mellanox.com>
Cc: Max Gurtovoy <maxg@mellanox.com>
Cc: Laurence Oberman <loberman@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Add constants and data structures to support immediate data. These
changes conform to SRP2r04.
Cc: Sergey Gorenko <sergeygo@mellanox.com>
Cc: Max Gurtovoy <maxg@mellanox.com>
Cc: Laurence Oberman <loberman@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Most SCSI drivers want to enable "clustering", that is merging of
segments so that they might span more than a single page. Remove the
ENABLE_CLUSTERING define, and require drivers to explicitly set
DISABLE_CLUSTERING to disable this feature.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Make all the required change to start use the ib_device_ops structure.
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The WARN_ON() is pointless as the rport is placed in SDEV_TRANSPORT_OFFLINE
at that time, so no new commands can be submitted via srp_queuecommand()
Signed-off-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.com>
Acked-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
From git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma.git
This is required to resolve dependencies of the next series of RDMA
patches.
The code motion conflicts in drivers/infiniband/core/cache.c were
resolved.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
These return the same thing but dev_name is a more conventional use of the
kernel API.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Use different loop variables for the inner and outer loop. This avoids
that an infinite loop occurs if there are more RDMA channels than
target->req_ring_size.
Fixes: d92c0da71a ("IB/srp: Add multichannel support")
Cc: <stable@vger.kernel.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Constify several pointers such as path_rec, ib_cm_event and listen_id
pointers in several functions.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Instead of declaring and passing a dummy 'bad_wr' pointer, pass NULL
as third argument to ib_post_(send|recv|srq_recv)().
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Remove the driver version and release date information because such
information is not relevant for an upstream driver. See also commit
e1267b0124 ("RDMA: Remove useless MODULE_VERSION").
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
If the gid_attr argument is NULL then the functions behave identically to
rdma_query_gid. ib_query_gid just calls ib_get_cached_gid, so everything
can be consolidated to one function.
Now that all callers either use rdma_query_gid() or ib_get_cached_gid(),
ib_query_gid() API is removed.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
INFINIBAND_SRP code depends on INFINIBAND_ADDR_TRANS provided symbols.
So declare the kconfig dependency. This is necessary to allow for
enabling INFINIBAND without INFINIBAND_ADDR_TRANS.
Signed-off-by: Greg Thelen <gthelen@google.com>
Cc: Tarick Bedeir <tarick@google.com>
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
According to the SRP standard the INITIATOR and TARGET PORT IDENTIFIER
fields from the login request specify the I_T nexus. Whether or not an
SRP target closes an existing connection for an I_T nexus when a login
request is received depends on the value of the MULTICHANNEL field in
the login request. The SRP initiator derives the value of the
INITIATOR and TARGET PORT IDENTIFIER fields from the .id_ext,
.ioc_guid, .initiator_ext .sgid members of the srp_target_port
structure. This means that the .rdma_cm.dst check must be removed from
srp_conn_unique(). This patch avoids that for target ports that have
multiple addresses, e.g. an IPv4 and an IPv6 address, and if a
connection is established to both target port addresses, that the
initiator logs in alternatingly every 10 seconds to the other target
port address. An SRP target must namely terminate all but one
connections for a given I_T nexus if the MULTICHANNEL field has not
been set in the login request.
Fixes: 19f313438c ("IB/srp: Add RDMA/CM support")
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Split IPv6 addresses at the colon that separates the IPv6 address
and the port number instead of at a colon in the middle of the IPv6
address. Check whether the IPv6 address is surrounded with square
brackets.
Fixes: 19f313438c ("IB/srp: Add RDMA/CM support")
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
If a HCA supports the SG_GAPS_REG feature then fewer memory regions
are required per command. This patch reduces the number of memory
regions that is allocated per SRP session.
Signed-off-by: Sergey Gorenko <sergeygo@mellanox.com>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Tested-by: Laurence Oberman <loberman@redhat.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Acked-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Except for a minor log message change, this patch does not change
any functionality. For the introduction of %pIS, see also commit
1067964305 ("lib: vsprintf: add IPv4/v6 generic %p[Ii]S[pfs]
format specifier").
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The caller of srp_ib_lookup_path() is responsible for holding a reference
on the SCSI host. That means that commit 8a0d18c621 was not necessary.
Hence revert it.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Before commit e494f6a728 ("[SCSI] improved eh timeout handler") it
did not really matter whether or not abort handlers like srp_abort()
called .scsi_done() when returning another value than SUCCESS. Since
that commit however this matters. Hence only call .scsi_done() when
returning SUCCESS.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Ensure that cv_end is equal to ibdev->num_comp_vectors for the
NUMA node with the highest index. This patch improves spreading
of RDMA channels over completion vectors and thereby improves
performance, especially on systems with only a single NUMA node.
This patch drops support for the comp_vector login parameter by
ignoring the value of that parameter since I have not found a
good way to combine support for that parameter and automatic
spreading of RDMA channels over completion vectors.
Fixes: d92c0da71a ("IB/srp: Add multichannel support")
Reported-by: Alexander Schmid <alex@modula-shop-systems.de>
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Alexander Schmid <alex@modula-shop-systems.de>
Cc: stable@vger.kernel.org
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Although I'm not sure this parameter is useful for regular SRP users,
setting this parameter to 1 has shown to be invaluable for testing the
block layer core, SCSI core and device mapper queue running mechanisms.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Since the SRP_LOGIN_REQ defined in the SRP standard is larger than
what fits in the RDMA/CM login request private data, introduce a new
login request format for the RDMA/CM.
Note: since srp_daemon and ibsrpdm rely on the subnet manager and
since there is no equivalent of the IB subnet manager in non-IB
networks, login has to be performed manually for non-IB networks.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch does not change any functionality but prepares for the patch
that adds RDMA_CM support by making the RDMA_CM patch much easier to
read.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Show all path record query parameters if a path record query fails.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Use kstrtoull() since simple_strtoull() is deprecated. This patch
improves error checking but otherwise does not change any functionality.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
There is no need to have a duplication of the generic library, i.e.
hex2bin().
Replace the open coded variant.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
For small networks it is safe to reduce the subnet timeout from
its default value (18 for opensm) to 16. Make the SRP CM timeout
dependent on the subnet timeout such that decreasing the subnet
timeout also causes SRP failover and failback to occur faster.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This is a micro-optimization for the hot path.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch does not change any functionality.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Instead of making every caller convert the second argument of
sa_path_set_slid() and sa_path_set_dlid() to big endian format,
make these two functions accept LIDs in CPU endian format.
This patch does not change any functionality.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Sean Hefty <sean.hefty@intel.com>
Cc: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Cc: Don Hiatt <don.hiatt@intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
All modules in drivers/infiniband defined and used MODULE_VERSION, which
was pointless because the kernel version describes their state more accurate
then those arbitrary numbers.
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Acked-by: Sagi Grimbrg <sagi@grimberg.me>
Reviewed-by: Sagi Grimberg <sagi@grimbeg.me>
Acked-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Acked-by: Selvin Xavier <selvin.xavier@broadcom.com>
Acked-by: Ram Amrani <Ram.Amrani@cavium.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Acked-by: Adit Ranadive <aditr@vmware.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Commit 9fdca4da4d (IB/SA: Split struct sa_path_rec based on IB and
ROCE specific fields) moved the service_id to be specific attribute
for IB and OPA SA Path Record, and thus wasn't assigned for RoCE.
This caused to the following kernel panic in the CMA request handler flow:
[ 27.074594] BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
[ 27.074731] IP: __radix_tree_lookup+0x1d/0xe0
...
[ 27.075356] Workqueue: ib_cm cm_work_handler [ib_cm]
[ 27.075401] task: ffff88022e3b8000 task.stack: ffffc90001298000
[ 27.075449] RIP: 0010:__radix_tree_lookup+0x1d/0xe0
...
[ 27.075979] Call Trace:
[ 27.076015] radix_tree_lookup+0xd/0x10
[ 27.076055] cma_ps_find+0x59/0x70 [rdma_cm]
[ 27.076097] cma_id_from_event+0xd2/0x470 [rdma_cm]
[ 27.076144] ? ib_init_ah_from_path+0x39a/0x590 [ib_core]
[ 27.076193] cma_req_handler+0x25/0x480 [rdma_cm]
[ 27.076237] cm_process_work+0x25/0x120 [ib_cm]
[ 27.076280] ? cm_get_bth_pkey.isra.62+0x3c/0xa0 [ib_cm]
[ 27.076350] cm_req_handler+0xb03/0xd40 [ib_cm]
[ 27.076430] ? sched_clock_cpu+0x11/0xb0
[ 27.076478] cm_work_handler+0x194/0x1588 [ib_cm]
[ 27.076525] process_one_work+0x160/0x410
[ 27.076565] worker_thread+0x137/0x4a0
[ 27.076614] kthread+0x112/0x150
[ 27.076684] ? max_active_store+0x60/0x60
[ 27.077642] ? kthread_park+0x90/0x90
[ 27.078530] ret_from_fork+0x2c/0x40
This patch moves it back to the common SA Path Record structure
and removes the redundant setter and getter.
Tested on Connect-IB and Connect-X4 in Infiniband and RoCE respectively.
Fixes: 9fdca4da4d (IB/SA: Split struct sa_path_rec based on IB ands
ROCE specific fields)
Signed-off-by: Majd Dibbiny <majd@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
If srp_init_qp() fails at srp_create_ch_ib() then ch->send_cq
may be NULL.
Calling directly to ib_destroy_qp() is sufficient because
no work requests were posted on the created qp.
Fixes: 9294000d6d ("IB/srp: Drain the send queue before destroying a QP")
Cc: <stable@vger.kernel.org>
Signed-off-by: Israel Rukshin <israelr@mellanox.com>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Bart van Assche <bart.vanassche@sandisk.com>--
Signed-off-by: Doug Ledford <dledford@redhat.com>
When the bit 26 of capmask2 field in OPA classport info
query is set, SA will query for OPA path records instead
of querying for IB path records. Note that OPA
path records can only be queried by kernel ULPs.
Userspace clients continue to query IB path records.
Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Add opa_sa_path_rec to sa_path_rec data structure.
The 'type' field in sa_path_rec identifies the
type of the path record.
Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
sa_path_rec now contains a union of sa_path_rec_ib and sa_path_rec_roce
based on the type of the path record. Note that fields applicable to
path record type ROCE v1 and ROCE v2 fall under sa_path_rec_roce.
Accessor functions are added to these fields so the caller doesn't have
to know the type.
Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Rename ib_sa_path_rec to a more generic sa_path_rec.
This is part of extending ib_sa to also support OPA
path records in addition to the IB defined path records.
Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Bart Van Assche noted that the ib DMA mapping code was significantly
similar enough to the core DMA mapping code that with a few changes
it was possible to remove the IB DMA mapping code entirely and
switch the RDMA stack to use the core DMA mapping code. This resulted
in a nice set of cleanups, but touched the entire tree. This branch
will be submitted separately to Linus at the end of the merge window
as per normal practice for tree wide changes like this.
-----BEGIN PGP SIGNATURE-----
iQIcBAABAgAGBQJYo06oAAoJELgmozMOVy/d9Z8QALedWHdu98St1L0u2c8sxnR9
2zo/4sF5Vb9u7FpmdIX32L4SQ9s9KhPE8Qp8NtZLf9v10zlDebIRJDpXknXtKooV
CAXxX4sxBXV27/UrhbZEfXiPrmm6ccJFyIfRnMU6NlMqh2AtAsRa5AC2/RMp8oUD
Med97PFiF0o6TD22/UH1VFbRpX1zjaKyqm7a3as5sJfzNA+UGIZAQ7Euz8000DKZ
xCgVLTEwS0FmOujtBkCst7xa9TjuqR1HLOB4DdGvAhP6BHdz2yamM7Qmh9NN+NEX
0BtjsuXomtn6j6AszGC+bpipCZh3NUigcwoFAARXCYFHibBvo4DPdFeGsraFgXdy
1+KyR8CCeQG3Aly5Vwr264RFPGkGpwMj8PsBlXgQVtrlg4rriaCzOJNmIIbfdADw
ftqhxBOzReZw77aH2s+9p2ILRfcAmPqhynLvFGFo9LBvsik8LVso7YgZN0xGxwcI
IjI/XGC8UskPVsIZBIYA6sl2bYzgOjtBIHiXjRrPlW3uhduIXLrvKFfLPP/5XLAG
ehLXK+J0bfsyY9ClmlNS8oH/WdLhXAyy/KNmnj5bRRm9qg6BRJR3bsOBhZJODuoC
XgEXFfF6/7roNESWxowff7pK0rTkRg/m/Pa4VQpeO+6NWHE7kgZhL6kyIp5nKcwS
3e7mgpcwC+3XfA/6vU3F
=e0Si
-----END PGP SIGNATURE-----
Merge tag 'for-next-dma_ops' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma
Pull rdma DMA mapping updates from Doug Ledford:
"Drop IB DMA mapping code and use core DMA code instead.
Bart Van Assche noted that the ib DMA mapping code was significantly
similar enough to the core DMA mapping code that with a few changes it
was possible to remove the IB DMA mapping code entirely and switch the
RDMA stack to use the core DMA mapping code.
This resulted in a nice set of cleanups, but touched the entire tree
and has been kept separate for that reason."
* tag 'for-next-dma_ops' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (37 commits)
IB/rxe, IB/rdmavt: Use dma_virt_ops instead of duplicating it
IB/core: Remove ib_device.dma_device
nvme-rdma: Switch from dma_device to dev.parent
RDS: net: Switch from dma_device to dev.parent
IB/srpt: Modify a debug statement
IB/srp: Switch from dma_device to dev.parent
IB/iser: Switch from dma_device to dev.parent
IB/IPoIB: Switch from dma_device to dev.parent
IB/rxe: Switch from dma_device to dev.parent
IB/vmw_pvrdma: Switch from dma_device to dev.parent
IB/usnic: Switch from dma_device to dev.parent
IB/qib: Switch from dma_device to dev.parent
IB/qedr: Switch from dma_device to dev.parent
IB/ocrdma: Switch from dma_device to dev.parent
IB/nes: Remove a superfluous assignment statement
IB/mthca: Switch from dma_device to dev.parent
IB/mlx5: Switch from dma_device to dev.parent
IB/mlx4: Switch from dma_device to dev.parent
IB/i40iw: Remove a superfluous assignment statement
IB/hns: Switch from dma_device to dev.parent
...
