There are two flows for handling RDMA_CM_EVENT_ROUTE_RESOLVED, either the
handler triggers a completion and another thread does rdma_connect() or
the handler directly calls rdma_connect().
In all cases rdma_connect() needs to hold the handler_mutex, but when
handler's are invoked this is already held by the core code. This causes
ULPs using the 2nd method to deadlock.
Provide a rdma_connect_locked() and have all ULPs call it from their
handlers.
Link: https://lore.kernel.org/r/0-v2-53c22d5c1405+33-rdma_connect_locking_jgg@nvidia.com
Reported-and-tested-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Fixes: 2a7cec5381 ("RDMA/cma: Fix locking for the RDMA_CM_CONNECT state")
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The code in setup_dma_device has become rather convoluted, move all of
this to the drivers. Drives now pass in a DMA capable struct device which
will be used to setup DMA, or drivers must fully configure the ibdev for
DMA and pass in NULL.
Other than setting the masks in rvt all drivers were doing this already
anyhow.
mthca, mlx4 and mlx5 were already setting up maximum DMA segment size for
DMA based on their hardweare limits in:
__mthca_init_one()
dma_set_max_seg_size (1G)
__mlx4_init_one()
dma_set_max_seg_size (1G)
mlx5_pci_init()
set_dma_caps()
dma_set_max_seg_size (2G)
Other non software drivers (except usnic) were extended to UINT_MAX [1, 2]
instead of 2G as was before.
[1] https://lore.kernel.org/linux-rdma/20200924114940.GE9475@nvidia.com/
[2] https://lore.kernel.org/linux-rdma/20200924114940.GE9475@nvidia.com/
Link: https://lore.kernel.org/r/20201008082752.275846-1-leon@kernel.org
Link: https://lore.kernel.org/r/6b2ed339933d066622d5715903870676d8cc523a.1602590106.git.mchehab+huawei@kernel.org
Suggested-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Expose the query GID table and entry API to user space by adding two new
methods and method handlers to the device object.
This API provides a faster way to query a GID table using single call and
will be used in libibverbs to improve current approach that requires
multiple calls to open, close and read multiple sysfs files for a single
GID table entry.
Link: https://lore.kernel.org/r/20200923165015.2491894-5-leon@kernel.org
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Introduce rdma_query_gid_table which enables querying all the GID tables
of a given device and copying the attributes of all valid GID entries to a
provided buffer.
This API provides a faster way to query a GID table using single call and
will be used in libibverbs to improve current approach that requires
multiple calls to open, close and read multiple sysfs files for a single
GID table entry.
Link: https://lore.kernel.org/r/20200923165015.2491894-4-leon@kernel.org
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Separate IB_GID_TYPE_IB and IB_GID_TYPE_ROCE to two different values, so
enum ib_gid_type will match the gid types of the new query GID table API
which will be introduced in the following patches.
This change in enum ib_gid_type requires to change also enum
rdma_network_type by separating RDMA_NETWORK_IB and RDMA_NETWORK_ROCE_V1
values.
Link: https://lore.kernel.org/r/20200923165015.2491894-3-leon@kernel.org
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Enable ODP sync without faulting, this improves performance by reducing
the number of page faults in the system.
The gain from this option is that the device page table can be aligned
with the presented pages in the CPU page table without causing page
faults.
As of that, the overhead on data path from hardware point of view to
trigger a fault which end-up by calling the driver to bring the pages
will be dropped.
Link: https://lore.kernel.org/r/20200930163828.1336747-3-leon@kernel.org
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Move to use hmm_range_fault() instead of get_user_pags_remote() to improve
performance in a few aspects:
This includes:
- Dropping the need to allocate and free memory to hold its output
- No need any more to use put_page() to unpin the pages
- The logic to detect contiguous pages is done based on the returned
order, no need to run per page and evaluate.
In addition, moving to use hmm_range_fault() enables to reduce page faults
in the system with it's snapshot mode, this will be introduced in next
patches from this series.
As part of this, cleanup some flows and use the required data structures
to work with hmm_range_fault().
Link: https://lore.kernel.org/r/20200930163828.1336747-2-leon@kernel.org
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Nothing reads this any more, and the reason for its existence has passed
due to the deferred fput() scheme.
Fixes: 8ea1f989aa ("drivers/IB,usnic: reduce scope of mmap_sem")
Link: https://lore.kernel.org/r/0-v1-df64ff042436+42-uctx_closing_jgg@nvidia.com
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Use rdma_restrack_set_name() and rdma_restrack_parent_name() instead of
tricky uses of rdma_restrack_attach_task()/rdma_restrack_uadd().
This uniformly makes all restracks add'd using rdma_restrack_add().
Link: https://lore.kernel.org/r/20200922091106.2152715-6-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Have a single rdma_restrack_add() that adds an entry, there is no reason
to split the user/kernel here, the rdma_restrack_set_task() is responsible
for this difference.
This patch prepares the code to the future requirement of making restrack
is mandatory for managing ib objects.
Link: https://lore.kernel.org/r/20200922091106.2152715-5-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Refactor the restrack code to make sure the kref inside the restrack entry
properly kref's the object in which it is embedded. This slight change is
needed for future conversions of MR and QP which are refcounted before the
release and kfree.
The ideal flow from ib_core perspective as follows:
* Allocate ib_* structure with rdma_zalloc_*.
* Set everything that is known to ib_core to that newly created object.
* Initialize kref with restrack help
* Call to driver specific allocation functions.
* Insert into restrack DB
....
* Return and release restrack with restrack_put.
Largely this means a rdma_restrack_new() should be called near allocating
the containing structure.
Link: https://lore.kernel.org/r/20200922091106.2152715-4-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Leon Romanovsky says:
====================
IBTA declares speed as 16 bits, but kernel stores it in u8. This series
fixes in-kernel declaration while keeping external interface intact.
====================
Based on the mlx5-next branch at
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux
due to dependencies.
* branch 'mlx5_active_speed':
RDMA: Fix link active_speed size
RDMA/mlx5: Delete duplicated mlx5_ptys_width enum
net/mlx5: Refactor query port speed functions
According to the IB spec active_speed size should be u16 and not u8 as
before. Changing it to allow further extensions in offered speeds.
Link: https://lore.kernel.org/r/20200917090223.1018224-4-leon@kernel.org
Signed-off-by: Aharon Landau <aharonl@mellanox.com>
Reviewed-by: Michael Guralnik <michaelgur@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Move allocation and destruction of memory windows under ib_core
responsibility and clean drivers to ensure that no updates to MW
ib_core structures are done in driver layer.
Link: https://lore.kernel.org/r/20200902081623.746359-2-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Add work completion opcodes to a new ib_uverbs_wc_opcode enum in
ib_user_verbs.h. This plays the same role as ib_uverbs_wr_opcode
documenting the opcodes in the user space API.
Assigned the IB_WC_XXX opcodes in ib_verbs.h to the IB_UVERBS_WC_XXX
where they are defined. This follows the same pattern as the IB_WR_XXX
opcodes. This fixes an incorrect value for LSO that had crept in but
is not currently being used.
Added a missing IB_WR_BIND_MW opcode in ib_verbs.h.
Link: https://lore.kernel.org/r/20200903224039.437391-2-rpearson@hpe.com
Signed-off-by: Bob Pearson <rpearson@hpe.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
For the calls linked to mlx4_ib_umem_calc_optimal_mtt_size() use
ib_umem_num_dma_blocks() inside the function, it is just some weird static
default.
All other places are just using it with PAGE_SIZE, switch to
ib_umem_num_dma_blocks().
As this is the last call site, remove ib_umem_num_count().
Link: https://lore.kernel.org/r/15-v2-270386b7e60b+28f4-umem_1_jgg@nvidia.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
ib_umem_num_pages() should only be used by things working with the SGL in
CPU pages directly.
Drivers building DMA lists should use the new ib_num_dma_blocks() which
returns the number of blocks rdma_umem_for_each_block() will return.
To make this general for DMA drivers requires a different implementation.
Computing DMA block count based on umem->address only works if the
requested page size is < PAGE_SIZE and/or the IOVA == umem->address.
Instead the number of DMA pages should be computed in the IOVA address
space, not umem->address. Thus the IOVA has to be stored inside the umem
so it can be used for these calculations.
For now set it to umem->address by default and fix it up if
ib_umem_find_best_pgsz() was called. This allows drivers to be converted
to ib_umem_num_dma_blocks() safely.
Link: https://lore.kernel.org/r/6-v2-270386b7e60b+28f4-umem_1_jgg@nvidia.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This helper does the same as rdma_for_each_block(), except it works on a
umem. This simplifies most of the call sites.
Link: https://lore.kernel.org/r/4-v2-270386b7e60b+28f4-umem_1_jgg@nvidia.com
Acked-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Acked-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The calculation in rdma_find_pg_bit() is fairly complicated, and the
function is never called anywhere else. Inline a simpler version into
ib_umem_find_best_pgsz()
Link: https://lore.kernel.org/r/3-v2-270386b7e60b+28f4-umem_1_jgg@nvidia.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Change counters to return failure like any other verbs destroy, however
this flow shouldn't return error at all.
Link: https://lore.kernel.org/r/20200907120921.476363-10-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Like any other verbs objects, CQ shouldn't fail during destroy, but
mlx5_ib didn't follow this contract with mixed IB verbs objects with
DEVX. Such mix causes to the situation where FW and kernel are fully
interdependent on the reference counting of each side.
Kernel verbs and drivers that don't have DEVX flows shouldn't fail.
Fixes: e39afe3d6d ("RDMA: Convert CQ allocations to be under core responsibility")
Link: https://lore.kernel.org/r/20200907120921.476363-7-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The ib_alloc_cq*() and ib_free_cq*() are solely kernel verbs to manage CQs
and doesn't need extra indirection just to call same functions with
constant parameter NULL as udata.
Link: https://lore.kernel.org/r/20200907120921.476363-6-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
In similar way to other IB objects, restore the ability to return error on
SRQ destroy. Strictly speaking, this change is not necessary, and provided
here to ensure a symmetrical interface like other destroy functions.
Fixes: 68e326dea1 ("RDMA: Handle SRQ allocations by IB/core")
Link: https://lore.kernel.org/r/20200907120921.476363-5-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Like any other IB verbs objects, AH are refcounted by ib_core. The release
of those objects are controlled by ib_core with promise that AH destroy
can't fail.
Being SW object for now, this change makes dealloc_ah() to behave like any
other destroy IB flows.
Fixes: d345691471 ("RDMA: Handle AH allocations by IB/core")
Link: https://lore.kernel.org/r/20200907120921.476363-3-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The IB verbs objects are counted by the kernel and ib_core ensures that
deallocate PD will success so it will be called once all other objects
that depends on PD will be released. This is achieved by managing various
reference counters on such objects.
The mlx5 driver didn't follow this standard flow when allowed DEVX objects
that are not managed by ib_core to be interleaved with the ones under
ib_core responsibility.
In such interleaved scenarios deallocate command can fail and ib_core will
leave uobject in internal DB and attempt to clean it later to free
resources anyway.
This change partially restores returned value from dealloc_pd() for all
drivers, but keeping in mind that non-DEVX devices and kernel verbs paths
shouldn't fail.
Fixes: 21a428a019 ("RDMA: Handle PD allocations by IB/core")
Link: https://lore.kernel.org/r/20200907120921.476363-2-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Currently it triggers a WARN_ON and then goes ahead and destroys the
uobject anyhow, leaking any driver memory.
The only place that leaks driver memory should be during FD close() in
uverbs_destroy_ufile_hw().
Drivers are only allowed to fail destroy uobjects if they guarantee
destroy will eventually succeed. uverbs_destroy_ufile_hw() provides the
loop to give the driver that chance.
Link: https://lore.kernel.org/r/20200902081708.746631-1-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The original function returns unsigned long and 0 on failure.
Fixes: 4a35339958 ("RDMA/umem: Add API to find best driver supported page size in an MR")
Link: https://lore.kernel.org/r/0-v1-982a13cc5c6d+501ae-fix_best_pgsz_stub_jgg@nvidia.com
Reviewed-by: Gal Pressman <galpress@amazon.com>
Acked-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The UDP source port number in RoCE v2 is used to create entropy for
network routers (ECMP), load balancers and 802.3ad link aggregation
switching that are not aware of RoCE IB headers. Considering that the IB
core has achieved a new interface to get a hashed value of it, the fixed
value of it in QPC and UD WQE in hns driver could be fixed and the port
number is to be set dynamically now.
For QPC of RC, the value could be hashed from flow_lable if the user pass
it in or from remote qpn and local qpn. For WQE of UD, it is set according
to fl or as a random value.
Link: https://lore.kernel.org/r/1598002289-8611-1-git-send-email-liweihang@huawei.com
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
In almost all cases rdma_accept() is called under the handler_mutex by
ULPs from their handler callbacks. The one exception was ucma which did
not get the handler_mutex.
To improve the understand-ability of the locking scheme obtain the mutex
for ucma as well.
This improves how ucma works by allowing it to directly use handler_mutex
for some of its internal locking against the handler callbacks intead of
the global file->mut lock.
There does not seem to be a serious bug here, other than a DISCONNECT event
can be delivered concurrently with accept succeeding.
Link: https://lore.kernel.org/r/20200818120526.702120-7-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The "domain" argument is constant and modern device (mlx5) doesn't support
anything except IB_FLOW_DOMAIN_USER, so delete this extra parameter and
simplify code.
Link: https://lore.kernel.org/r/20200730081235.1581127-4-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Smaller set of RDMA updates. A smaller number of 'big topics' with the
majority of changes being driver updates.
- Driver updates for hfi1, rxe, mlx5, hns, qedr, usnic, bnxt_re
- Removal of dead or redundant code across the drivers
- RAW resource tracker dumps to include a device specific data blob for
device objects to aide device debugging
- Further advance the IOCTL interface, remove the ability to turn it off.
Add QUERY_CONTEXT, QUERY_MR, and QUERY_PD commands
- Remove stubs related to devices with no pkey table
- A shared CQ scheme to allow multiple ULPs to share the CQ rings of a
device to give higher performance
- Several more static checker, syzkaller and rare crashers fixed
-----BEGIN PGP SIGNATURE-----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=0z2L
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
"A quiet cycle after the larger 5.8 effort. Substantially cleanup and
driver work with a few smaller features this time.
- Driver updates for hfi1, rxe, mlx5, hns, qedr, usnic, bnxt_re
- Removal of dead or redundant code across the drivers
- RAW resource tracker dumps to include a device specific data blob
for device objects to aide device debugging
- Further advance the IOCTL interface, remove the ability to turn it
off. Add QUERY_CONTEXT, QUERY_MR, and QUERY_PD commands
- Remove stubs related to devices with no pkey table
- A shared CQ scheme to allow multiple ULPs to share the CQ rings of
a device to give higher performance
- Several more static checker, syzkaller and rare crashers fixed"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (121 commits)
RDMA/mlx5: Fix flow destination setting for RDMA TX flow table
RDMA/rxe: Remove pkey table
RDMA/umem: Add a schedule point in ib_umem_get()
RDMA/hns: Fix the unneeded process when getting a general type of CQE error
RDMA/hns: Fix error during modify qp RTS2RTS
RDMA/hns: Delete unnecessary memset when allocating VF resource
RDMA/hns: Remove redundant parameters in set_rc_wqe()
RDMA/hns: Remove support for HIP08_A
RDMA/hns: Refactor hns_roce_v2_set_hem()
RDMA/hns: Remove redundant hardware opcode definitions
RDMA/netlink: Remove CAP_NET_RAW check when dump a raw QP
RDMA/include: Replace license text with SPDX tags
RDMA/rtrs: remove WQ_MEM_RECLAIM for rtrs_wq
RDMA/rtrs-clt: add an additional random 8 seconds before reconnecting
RDMA/cma: Execute rdma_cm destruction from a handler properly
RDMA/cma: Remove unneeded locking for req paths
RDMA/cma: Using the standard locking pattern when delivering the removal event
RDMA/cma: Simplify DEVICE_REMOVAL for internal_id
RDMA/efa: Add EFA 0xefa1 PCI ID
RDMA/efa: User/kernel compatibility handshake mechanism
...
The lookaside count is improperly initialized to the size of the
Receive Queue with the additional +1. In the traces below, the
RQ size is 384, so the count was set to 385.
The lookaside count is then rarely refreshed. Note the high and
incorrect count in the trace below:
rvt_get_rwqe: [hfi1_0] wqe ffffc900078e9008 wr_id 55c7206d75a0 qpn c
qpt 2 pid 3018 num_sge 1 head 1 tail 0, count 385
rvt_get_rwqe: (hfi1_rc_rcv+0x4eb/0x1480 [hfi1] <- rvt_get_rwqe) ret=0x1
The head,tail indicate there is only one RWQE posted although the count
says 385 and we correctly return the element 0.
The next call to rvt_get_rwqe with the decremented count:
rvt_get_rwqe: [hfi1_0] wqe ffffc900078e9058 wr_id 0 qpn c
qpt 2 pid 3018 num_sge 0 head 1 tail 1, count 384
rvt_get_rwqe: (hfi1_rc_rcv+0x4eb/0x1480 [hfi1] <- rvt_get_rwqe) ret=0x1
Note that the RQ is empty (head == tail) yet we return the RWQE at tail 1,
which is not valid because of the bogus high count.
Best case, the RWQE has never been posted and the rc logic sees an RWQE
that is too small (all zeros) and puts the QP into an error state.
In the worst case, a server slow at posting receive buffers might fool
rvt_get_rwqe() into fetching an old RWQE and corrupt memory.
Fix by deleting the faulty initialization code and creating an
inline to fetch the posted count and convert all callers to use
new inline.
Fixes: f592ae3c99 ("IB/rdmavt: Fracture single lock used for posting and processing RWQEs")
Link: https://lore.kernel.org/r/20200728183848.22226.29132.stgit@awfm-01.aw.intel.com
Reported-by: Zhaojuan Guo <zguo@redhat.com>
Cc: <stable@vger.kernel.org> # 5.4.x
Reviewed-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Tested-by: Honggang Li <honli@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The header files in RDMA subsystem are dual licensed and can be
described by simple SPDX tag, so replace all of them at once
together with making them use the same coding style for header
guard defines.
Link: https://lore.kernel.org/r/20200719072521.135260-1-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Create the same logic flow for the write() interface as we have for the
ioctl() path by making sure that the object is committed or aborted
automatically after HW object creation.
Link: https://lore.kernel.org/r/20200719052223.75245-2-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Update the code to allocate and free ib_xrcd structure in the
ib_core instead of inside drivers.
Link: https://lore.kernel.org/r/20200630101855.368895-4-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Expose UAPI to query ucontext, this will let user space application that
didn't allocate the ucontext but has access to by owning the matching
command FD to retrieve the ucontext information.
Link: https://lore.kernel.org/r/20200630093916.332097-4-leon@kernel.org
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Replace the mutex with read write semaphore and use xarray instead of
linked list for XRC target QPs. This will give faster XRC target
lookup. In addition, when QP is closed, don't insert it back to the xarray
if the destroy command failed.
Link: https://lore.kernel.org/r/20200706122716.647338-4-leon@kernel.org
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
ib_alloc_xrcd() already does the required initialization, so move the
uverbs to call it and save code duplication, while cleaning the function
argument lists of that function.
Link: https://lore.kernel.org/r/20200706122716.647338-3-leon@kernel.org
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Allocating an MR flow can only be initiated by kernel users, and not from
userspace so a udata parameter is redundant.
Link: https://lore.kernel.org/r/20200706120343.10816-4-galpress@amazon.com
Signed-off-by: Gal Pressman <galpress@amazon.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Allocating an MR flow can only be initiated by kernel users, and not from
userspace. As a result, the udata parameter is always being passed as
NULL. Rename ib_alloc_mr_user function to ib_alloc_mr and remove the udata
parameter.
Link: https://lore.kernel.org/r/20200706120343.10816-3-galpress@amazon.com
Signed-off-by: Gal Pressman <galpress@amazon.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
For debugging purpose it will be easier to understand if prefetch works
okay if it has its own counter. Introduce ODP prefetch counter and count
per MR the total number of prefetched pages.
In addition remove comment which is not relevant anymore and anyway not in
the correct place.
Link: https://lore.kernel.org/r/20200621104147.53795-1-leon@kernel.org
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The RWQ table is used for RSS uverbs and not in used for the kernel
consumers, delete ib_create_rwq_ind_table() routine that is not
called at all.
Link: https://lore.kernel.org/r/20200624105422.1452290-5-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Add support to get resource dump in raw format. It enable drivers to
return the entire device specific QP/CQ/MR context without a need from the
driver to set each field separately.
The raw query returns only the device specific data, general data is still
returned by using the existing queries.
Example:
$ rdma res show mr dev mlx5_1 mrn 2 -r -j
[{"ifindex":7,"ifname":"mlx5_1",
"data":[0,4,255,254,0,0,0,0,0,0,0,0,16,28,0,216,...]}]
Link: https://lore.kernel.org/r/20200623113043.1228482-9-leon@kernel.org
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
In order to avoid double multiplexing of the resource when it is a cm id,
add a dedicated callback function. In addition remove fill_res_entry which
is not used anymore.
Link: https://lore.kernel.org/r/20200623113043.1228482-8-leon@kernel.org
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
In order to avoid double multiplexing of the resource when it is a QP, add
a dedicated callback function.
Link: https://lore.kernel.org/r/20200623113043.1228482-7-leon@kernel.org
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
