This patch adds support for the Analog Devices D5380, AD5381,
AD5382, AD5383, AD5384, AD5390, AD5391, AD5392 multi-channel
Digital to Analog Converters.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch adds support for the Analog Devices AD5764, AD5764R, AD5744, AD5744R
quad channel analog-to-digital converter.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Previously timestamps were always on in this driver.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
When illuminance0_calibbias gets 4000 (for a 4x multiplier), we see lux
granularity of 4. Reversing the order of the right shift and multiplication
retains the precision of the unadjusted lux value.
Signed-off-by: Bryan Freed <bfreed@chromium.org>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
In sca3000_store_measurement_mode() we use val to and it with a mask.
This mask is only two bits long (as we are only interested in the
lowest two bits), so a value bigger than 3 was silently ignored so
far.
Now this function will return -EINVAL, if val is bigger than 3.
Signed-off-by: Andreas Ruprecht <rupran@einserver.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
In sca3000_store_measurement_mode() we parse a value from a string
buffer via kstrtou8, and store the parsed value into a u8 after
and-ing it with mask.
As we are only interested in the lowest two bits here and mask is
initialized with a fixed value 0x03, mask may as well be a u8.
Signed-off-by: Andreas Ruprecht <rupran@einserver.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Hank is no longer at Microsoft, so remove his email address as it
bounces.
Cc: KY Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This removes the hv_mouse driver as it's now in Jiri's HID tree in the
"proper" place.
Cc: KY Srinivasan <kys@microsoft.com>
Cc: Jiri Kosina <jikos@jikos.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The current code implemented a per-HBA memory pool mechanism. For IDE disks
managed by this driver, there is a one to one correspondance between the
block device and the associated virtual HBA and since currently only IDE devices
can be the boot device, this addressed the deadlock issues that were raised during
the review process. This patch implements a per-lun memory pool mechanism.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fix a bug in copy_from_bounce_buffer().
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fix a bug in storvsc_command_completion() that leaks memory when scatter/gather
lists are used on the "write" side.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The code in storvsc_device_alloc() is not needed as this would be
done by default. Get rid of it. We still keep the function as we use
this hook to allocate per-LUN memory pools in a later patch.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Disable clustering, since the host side on Hyper-V requires that
each I/O element not exceed the page size. As part of this
cleanup, get rid of the function to merge bvecs, as the primary
reason for this function was to avoid having an element exceed
the page size.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Add code to accept promiscuous mode setting, and pass it to
RNDIS filter.
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
"line6" hasn't been set at this point and we should be using
&interface->dev instead.
Gcc would have complained about this if it weren't for the fact that we
initialized line6 to NULL. I removed the initialization.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
We need to properly add the hid device to correctly initialize the
sysfs state. While this patch is against the staging tree; Jiri,
please pick up this patch as you merge the Hyper-V mouse driver.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Reported-by: Fuzhou Chen <fuzhouch@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* Dan Carpenter <dan.carpenter@oracle.com> wrote:
> Sparse complains that these signed bitfields look "dubious". The
> problem is that instead of being either 0 or 1 like people would expect,
> signed one bit variables like this are either 0 or -1. It doesn't cause
> a problem in this case but it's ugly so lets fix them.
* walter harms (wharms@bfs.de) wrote:
> hi,
> This patch looks ok to me but this design is ugly by itself.
> It should be replaced by an uchar uint whatever or use a
> real bool (obviously not preferred by this programmes).
bool :1, uchar :1 or uint :1 could make sense. uchar:1/bool:1 won't save
any space here, because the surrounding fields are either uint or
pointers, so alignment will just add padding.
I try to use int/uint whenever possible because x86 CPUs tend to get
less register false-dependencies when using instructions modifying the
whole register (generated by using int/uint types) rather than only part
of it (uchar/char/bool). I only use char/uchar/bool when there is a
clear wanted space gain.
The reason why I never use the bool type within a structure when I want
a compact representation is that bool takes a whole byte just to
represent one bit:
struct usebitfield {
int a;
unsigned int f:1, g:1, h:1, i:1, j:1;
int b;
};
struct usebool {
int a;
bool f, g, h, i, j;
int b;
};
struct useboolbf {
int a;
bool f:1, g:1, h:1, i:1, j:1;
int b;
};
int main()
{
printf("bitfield %d bytes, bool %d bytes, boolbitfield %d bytes\n",
sizeof(struct usebitfield), sizeof(struct usebool),
sizeof(struct useboolbf));
}
result:
bitfield 12 bytes, bool 16 bytes, boolbitfield 12 bytes
This is because each bool takes one byte, while the bitfields are put in
units of "unsigned int" (or bool for the 3rd struct). So in this
example, we need 5 bytes + 3 bytes alignment for the bool, but only 4
bytes to hold the "unsigned int" unit for the bitfields.
The choice between bool and bitfields must also take into account the
frequency of access to the variable, because bitfields require mask
operations to access the selected bit(s). You will notice that none of
these bitfields are accessed on the tracing fast-path: only in
slow-paths. Therefore, space gain is more important than speed here.
One might argue that I have so few of these fields here that it does not
make an actual difference to go for bitfield or bool. I am just trying
to choose types best suited for their intended purpose, ensuring they
are future-proof and will allow simply adding more fields using the same
type, as needed.
So I guess I'll go for uint :1.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* Dan Carpenter <dan.carpenter@oracle.com> wrote:
> The patch c844b2f5cf: "lttng lib: ring buffer" from Nov 28, 2011,
> leads to the following Smatch complaint:
>
> drivers/staging/lttng/lib/ringbuffer/ring_buffer_mmap.c +86
> +lib_ring_buffer_mmap_buf()
> warn: variable dereferenced before check 'buf' (see line 79)
>
> drivers/staging/lttng/lib/ringbuffer/ring_buffer_mmap.c
> 78 unsigned long length = vma->vm_end - vma->vm_start;
> 79 struct channel *chan = buf->backend.chan;
> ^^^^^^^^^^^^^^^^^
> Dereference.
>
> 80 const struct lib_ring_buffer_config *config = chan->backend.config;
> 81 unsigned long mmap_buf_len;
> 82
> 83 if (config->output != RING_BUFFER_MMAP)
> 84 return -EINVAL;
> 85
> 86 if (!buf)
> ^^^^
> Check.
>
> 87 return -EBADF;
> 88
Let's move the NULL buf check to the file "open", where it belongs. The
"open" file operation is the actual interface between lib ring buffer
and the modules using it.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* Dan Carpenter <dan.carpenter@oracle.com> wrote:
[...]
> The patch c844b2f5cf: "lttng lib: ring buffer" from Nov 28, 2011,
> leads to the following Smatch complaint:
>
> drivers/staging/lttng/lib/ringbuffer/ring_buffer_frontend.c +1150
> +lib_ring_buffer_print_buffer_errors()
> warn: variable dereferenced before check 'chan' (see line 1143)
>
> drivers/staging/lttng/lib/ringbuffer/ring_buffer_frontend.c
> 1142 {
> 1143 const struct lib_ring_buffer_config *config =
> +chan->backend.config;
>
> +^^^^^^^^^^^^^^^^^^^^
> Dereference.
>
> 1144 unsigned long write_offset, cons_offset;
> 1145
> 1146 /*
> 1147 * Can be called in the error path of allocation when
> 1148 * trans_channel_data is not yet set.
> 1149 */
> 1150 if (!chan)
> ^^^^^^^^^
> Check. At first glance the comment seems out of date, I think check can
> be removed safely.
>
> 1151 return;
> 1152 /*
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The "rtl8192e: Export symbols" patch exported three functions already
exported by the rtl8192u driver. This patch renames the three functions:
Dot11d_Init => dot11d_init
HTUpdateSelfAndPeerSetting => HT_update_self_and_peer_setting
IsLegalChannel => rtllib_legal_channel
Signed-off-by: Sean MacLennan <seanm@seanm.ca>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Allow the board file to pass a boot info string through the
platform data that is appended to the /proc/last_kmsg file.
[moved the .h file to drivers/staging/android/ to be self-contained - gregkh]
Signed-off-by: Colin Cross <ccross@android.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The arguments to shrink functions have changed, update
lowmem_shrink to match.
Signed-off-by: Colin Cross <ccross@android.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Now that we're murder-synchronous, this code path will never be
called (and if it does, it doesn't tell us anything useful other
than we killed a task that was already being killed by somebody
else but hadn't gotten its' signal yet)
Signed-off-by: San Mehat <san@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
binder_deferred_release was not unmapping the page from the buffer
before freeing it, causing memory corruption. This only happened
when page(s) had not been freed by binder_update_page_range, which
properly unmaps the pages.
This only happens on architectures with VIPT aliasing.
To reproduce, create a program which opens, mmaps, munmaps, then closes
the binder very quickly. This should leave a page allocated when the
binder is released. When binder_deferrred_release is called on the
close, the page will remain mapped to the address in the linear
proc->buffer. Later, we may map the same physical page to a different
virtual address that has different coloring, and this may cause
aliasing to occur.
PAGE_POISONING will greatly increase your chances of noticing any
problems.
Signed-off-by: Christopher Lais <chris+android@zenthought.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch optimizes lowmemkiller to not do any work when it has an outstanding
kill-request. This greatly reduces the pressure on the task_list lock
(improving interactivity), as well as improving the vmscan performance
when under heavy memory pressure (by up to 20x in tests).
Note: For this enhancement to work, you need CONFIG_PROFILING
Signed-off-by: San Mehat <san@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Under certain circumstances, a process can take awhile to
handle a sig-kill (especially if it's in a scheduler group with
a very low share ratio). When this occurs, lowmemkiller returns
to vmscan indicating the process memory has been freed - even
though the process is still waiting to die. Since the memory
hasn't actually freed, lowmemkiller is called again shortly after,
and picks the same process to die; regardless of the fact that
it has already been 'scheduled' to die and the memory has already
been reported to vmscan as having been freed.
Solution is to check fatal_signal_pending() on the selected
task, and if it's already pending destruction return; indicating
to vmscan that no resources were freed on this pass.
Signed-off-by: San Mehat <san@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Some drivers flush the global workqueue when closed. This would deadlock if
the last reference to the file was released from the binder.
Signed-off-by: Arve Hjønnevåg <arve@android.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The timed output device never previously checked the return value of sscanf,
resulting in an uninitialized int being passed to enable() if input value
was invalid.
Signed-off-by: Mike Lockwood <lockwood@android.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
[Note, this is part of a patch from Sam, just the drivers/staging/
portion, that adds a function that the apanic code calls, but the apanic
code isn't here, so just include part of this to make merges and diffs
easier and this keeps things self-contained - gregkh]
Signed-off-by: San Mehat <san@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This reverts commit 2cdf99ce2b.
It now builds, so this can be reverted.
Cc: Arve Hjønnevåg <arve@android.com>
Cc: Brian Swetland <swetland@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This reverts commit b0a0ccfad8.
Turns out I was wrong, we want these in the tree.
Note, I've disabled the drivers from the build at the moment, so other
patches can be applied to fix some build issues due to internal api
changes since the code was removed from the tree.
Cc: Arve Hjønnevåg <arve@android.com>
Cc: Brian Swetland <swetland@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Now that the rtl8192e driver is split up, it makes sense to keep the
rtllib code in one directory and the rtl8192e specific code in
another. This patch contains the split and the fixup of includes.
Since rtl_core.h already included rtllib.h and dot11d.h, rtl_core.h
was updated to point to the parent directory. All other references to
rtllib.h and dot11d.h in the rtl8192e specific code where deleted
rather than fixed. This leaves just one file that needs to know the
real location of the rtllib includes.
Signed-off-by: Sean MacLennan <seanm@seanm.ca>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
