All of these ioctls are unused and most of them just duplicate what drm
already provides.
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Right now, all we need to know about the blitter is that it's not doing
anything that can be messed up when fiddling with MMU mappings.
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Old MMU code never wrote PDs or PTEs to any registers. Now we do, and
that's a good start.
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
This regression has been introduced in
commit b3f2333de8
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Wed Dec 11 11:34:31 2013 +0100
drm: restrict the device list for shadow attached drivers
Reported-by: Dave Jones <davej@redhat.com>
Cc: Dave Jones <davej@redhat.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Since we cannot make sure the 'max_conn_count' will always be none
zero from the users, and then if max_conn_count equals to zero, the
kcalloc() will return ZERO_SIZE_PTR, which equals to ((void *)16).
So this patch fix this with just doing the 'max_conn_count' zero check
in the front of drm_fb_helper_init().
Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com>
CC: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
We allocate memory in drm_display_mode_from_vic_index() and use it
without checking the pointer is valid. Fix that.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Use drm_fb_helper_restore_fbdev_mode() in drm_fb_helper_set_par() to
make sure extra planes get disabled whenever fbcon takes over.
Otherwise the code in drm_fb_helper_set_par() was already doing the
exact same thing as drm_fb_helper_restore_fbdev_mode(), so this doesn't
change the behaviour in any other way.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This series contains several cleanups for the DRM-minor handling. All but the
last one reviewed by Daniel and tested by Thierry. Initially, the series
included patches to convert minor-handling to a common base-ID, but have
been NACKed by Daniel so I dropped them and only included the main part in the
last patch. With this in place, drm_global_mutex is no longer needed for
minor-handling (but still for device unregistration..).
There are some pending patches that try to remove the global mutex entirely, but
they need some more reviews and thus are not included.
* 'drm-minor' of git://people.freedesktop.org/~dvdhrm/linux:
drm: make minors independent of global lock
drm: inline drm_minor_get_id()
drm: coding-style fixes in minor handling
drm: remove redundant minor->device field
drm: remove unneeded #ifdef CONFIG_DEBUGFS
drm: rename drm_unplug/get_minor() to drm_minor_register/unregister()
drm: move drm_put_minor() to drm_minor_free()
drm: allocate minors early
drm: add minor-lookup/release helpers
drm: provide device-refcount
drm: turn DRM_MINOR_* into enum
drm: remove unused DRM_MINOR_UNASSIGNED
drm: skip redundant minor-lookup in open path
drm: group dev-lifetime related members
This branch includes 6 minor fixes mainly for udl. Everything non-trivial was
reviewed by Daniel and the patches have been on the list for quite some time.
* 'drm-fixes' of git://people.freedesktop.org/~dvdhrm/linux:
drm/gem: dont init "ret" in drm_gem_mmap()
drm/crtc: add sanity checks to create_dumb()
drm/gem: free vma-node during object-cleanup
drm/gem: fix indentation
drm/udl: fix Bpp calculation in dumb_create()
drm/udl: fix error-path when damage-req fails
Pull scheduler fixes from Ingo Molnar:
"Three small fixes"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/clock: Prevent tracing recursion in sched_clock_cpu()
stop_machine: Fix^2 race between stop_two_cpus() and stop_cpus()
sched/deadline: Deny unprivileged users to set/change SCHED_DEADLINE policy
Pull perf fixes from Ingo Molnar:
"Misc smaller fixes"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86: Fix leak in uncore_type_init failure paths
perf machine: Use map as success in ip__resolve_ams
perf symbols: Fix crash in elf_section_by_name
perf trace: Decode architecture-specific signal numbers
While testing and documenting the msgrcv() MSG_COPY flag that Stanislav
Kinsbursky added in commit 4a674f34ba ("ipc: introduce message queue
copy feature" => kernel 3.8), I discovered a couple of bugs in the
implementation. The two bugs concern MSG_COPY interactions with other
msgrcv() flags, namely:
(A) MSG_COPY + MSG_EXCEPT
(B) MSG_COPY + !IPC_NOWAIT
The bugs are distinct (and the fix for the first one is obvious),
however my fix for both is a single-line patch, which is why I'm
combining them in a single mail, rather than writing two mails+patches.
===== (A) MSG_COPY + MSG_EXCEPT =====
With the addition of the MSG_COPY flag, there are now two msgrcv()
flags--MSG_COPY and MSG_EXCEPT--that modify the meaning of the 'msgtyp'
argument in unrelated ways. Specifying both in the same call is a
logical error that is currently permitted, with the effect that MSG_COPY
has priority and MSG_EXCEPT is ignored. The call should give an error
if both flags are specified. The patch below implements that behavior.
===== (B) (B) MSG_COPY + !IPC_NOWAIT =====
The test code that was submitted in commit 3a665531a3 ("selftests: IPC
message queue copy feature test") shows MSG_COPY being used in
conjunction with IPC_NOWAIT. In other words, if there is no message at
the position 'msgtyp'. return immediately with the error in ENOMSG.
What was not (fully) tested is the behavior if MSG_COPY is specified
*without* IPC_NOWAIT, and there is an odd behavior. If the queue
contains less than 'msgtyp' messages, then the call blocks until the
next message is written to the queue. At that point, the msgrcv() call
returns a copy of the newly added message, regardless of whether that
message is at the ordinal position 'msgtyp'. This is clearly bogus, and
problematic for applications that might want to make use of the MSG_COPY
flag.
I considered the following possible solutions to this problem:
(1) Force the call to block until a message *does* appear at the
position 'msgtyp'.
(2) If the MSG_COPY flag is specified, the kernel should implicitly add
IPC_NOWAIT, so that the call fails with ENOMSG for this case.
(3) If the MSG_COPY flag is specified, but IPC_NOWAIT is not, generate
an error (probably, EINVAL is the right one).
I do not know if any application would really want to have the
functionality of solution (1), especially since an application can
determine in advance the number of messages in the queue using msgctl()
IPC_STAT. Obviously, this solution would be the most work to implement.
Solution (2) would have the effect of silently fixing any applications
that tried to employ broken behavior. However, it would mean that if we
later decided to implement solution (1), then user-space could not
easily detect what the kernel supports (but, since I'm somewhat doubtful
that solution (1) is needed, I'm not sure that this is much of a
problem).
Solution (3) would have the effect of informing broken applications that
they are doing something broken. The downside is that this would cause
a ABI breakage for any applications that are currently employing the
broken behavior. However:
a) Those applications are almost certainly not getting the results they
expect.
b) Possibly, those applications don't even exist, because MSG_COPY is
currently hidden behind CONFIG_CHECKPOINT_RESTORE.
The upside of solution (3) is that if we later decided to implement
solution (1), user-space could determine what the kernel supports, via
the error return.
In my view, solution (3) is mildly preferable to solution (2), and
solution (1) could still be done later if anyone really cares. The
patch below implements solution (3).
PS. For anyone out there still listening, it's the usual story:
documenting an API (and the thinking about, and the testing of the API,
that documentation entails) is the one of the single best ways of
finding bugs in the API, as I've learned from a lot of experience. Best
to do that documentation before releasing the API.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
Acked-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Cc: Stanislav Kinsbursky <skinsbursky@parallels.com>
Cc: stable@vger.kernel.org
Cc: Serge Hallyn <serge.hallyn@canonical.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We used to protect minor-lookup and setup by the global drm lock. To
continue our attempts of dropping drm_global_mutex, this patch makes the
minor management independent of it. Furthermore, we make it all atomic and
switch to spin-locks instead of a mutex.
Now that minor-lookup is independent, we also move the
"drm_is_unplugged()" test into the minor-lookup path. There is no reason
to ever return a minor for unplugged objects, so keep that logic internal.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
We can significantly simplify this helper by using plain multiplication.
Note that we converted the minor-type to an enum earlier so this didn't
work before.
We also fix a minor range-bug here: the limit argument of idr_alloc() is
*exclusive*, not inclusive, so we should use 64 instead of 63 as offset.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Whenever we access minor->device, we are in a minor->kdev->...->fops
callback so the minor->kdev pointer *must* be valid. Thus, simply use
minor->kdev->devt instead of minor->device and remove the redundant field.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
No need to check for DEBUGFS, we already have dummy-fallbacks in our
headers.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
drm_get_minor() no longer allocates objects, and drm_unplug_minor() is now
the exact reverse of it. Rename it to _register/unregister() so their
name actually says what they do.
Furthermore, remove the direct minor-ptr and instead pass the minor-type.
This way we know the actual slot of the minor and can reset it if
required.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
_put/get() are used for ref-counting, which we clearly don't do here.
Rename it to _free() and also use the common drm_minor_* prefix.
Furthermore, avoid passing the minor directly but instead use the type
like the other functions do, this allows us to reset the slot.
We also drop the redundant call to drm_unplug_minor() as drm_minor_free()
is only used from paths were that has already be called.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Instead of waiting for device-registration, we now allocate minor-objects
during device allocation. The minors are not registered or assigned an ID.
This is still postponed to device-registration.
While at it, remove the superfluous output-parameter in drm_get_minor().
The reason for this early allocation is to make
dev->primary/control/render available atomically. So once the device is
alive, all of them are already set and we never have the situation where
one of them is set after another (they're either NULL or set, but never
changed). This will eventually allow us to reduce minor-ID allocation to
one base-ID instead of a single ID for each.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Instead of accessing drm_minors_idr directly, this adds a small helper to
hide the internals. This will help us later to remove the drm_global_mutex
requirement for minor-lookup.
Furthermore, this also makes sure that minor->dev is always valid and
takes a reference-count to the device as long as the minor is used in an
open-file. This way, "struct file*"->private_data->dev is guaranteed to be
valid (which it has to, as we cannot reset it).
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Lets not trick ourselves into thinking "drm_device" objects are not
ref-counted. That's just utterly stupid. We manage "drm_minor" objects on
each drm-device and each minor can have an unlimited number of open
handles. Each of these handles has the drm_minor (and thus the drm_device)
as private-data in the file-handle. Therefore, we may not destroy
"drm_device" until all these handles are closed.
It is *not* possible to reset all these pointers atomically and restrict
access to them, and this is *not* how this is done! Instead, we use
ref-counts to make sure the object is valid and not freed.
Note that we currently use "dev->open_count" for that, which is *exactly*
the same as a reference-count, just open coded. So this patch doesn't
change any semantics on DRM devices (well, this patch just introduces the
ref-count, anyway. Follow-up patches will replace open_count by it).
Also note that generic VFS revoke support could allow us to drop this
ref-count again. We could then just synchronously disable any fops->xy()
calls. However, this is not the case, yet, and no such patches are
in sight (and I seriously question the idea of dropping the ref-cnt
again).
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Use enum for DRM_MINOR_* constants to avoid hard-coding the IDs.
Furthermore, add a DRM_MINOR_CNT so we can perform range-checks in
follow-ups.
This changes the IDs of the minor-types by -1, but they're not used as
indices so this is fine.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The drm_open_helper() function is only used internally for drm_open() so
we can safely pass in the minor-object directly instead of the minor-id.
This way, we avoid the additional minor IDR lookup, which we already do
twice in drm_stub_open() and drm_open().
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
These members are all managed by DRM-core, lets group them together so
they're not split across the whole device.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
With dev->anon_inode we have a global address_space ready for operation
right from the beginning. Therefore, there is no need to do a delayed
setup with TTM. Instead, set dev_mapping during initialization in
ttm_bo_device_init() and remove any "if (dev_mapping)" conditions.
Cc: Dave Airlie <airlied@redhat.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Cc: Alex Deucher <alexdeucher@gmail.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
DRM drivers share a common address_space across all character-devices of a
single DRM device. This allows simple buffer eviction and mapping-control.
However, DRM core currently waits for the first ->open() on any char-dev
to mark the underlying inode as backing inode of the device. This delayed
initialization causes ugly conditions all over the place:
if (dev->dev_mapping)
do_sth();
To avoid delayed initialization and to stop reusing the inode of the
char-dev, we allocate an anonymous inode for each DRM device and reset
filp->f_mapping to it on ->open().
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Our current DRM design uses a single address_space for all users of the
same DRM device. However, there is no way to create an anonymous
address_space without an underlying inode. Therefore, we wait for the
first ->open() callback on a registered char-dev and take-over the inode
of the char-dev. This worked well so far, but has several drawbacks:
- We screw with FS internals and rely on some non-obvious invariants like
inode->i_mapping being the same as inode->i_data for char-devs.
- We don't have any address_space prior to the first ->open() from
user-space. This leads to ugly fallback code and we cannot allocate
global objects early.
As pointed out by Al-Viro, fs/anon_inode.c is *not* supposed to be used by
drivers for anonymous inode-allocation. Therefore, this patch follows the
proposed alternative solution and adds a pseudo filesystem mount-point to
DRM. We can then allocate private inodes including a private address_space
for each DRM device at initialization time.
Note that we could use:
sysfs_get_inode(sysfs_mnt->mnt_sb, drm_device->dev->kobj.sd);
to get access to the underlying sysfs-inode of a "struct device" object.
However, most of this information is currently hidden and it's not clear
whether this address_space is suitable for driver access. Thus, unless
linux allows anonymous address_space objects or driver-core provides a
public inode per device, we're left with our own private internal mount
point.
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
There is no need to initialize this variable, so drop it. Otherwise, the
compiler won't warn if we use it unintialized.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Lets make sure some basic expressions are always true:
bpp != NULL
width != NULL
height != NULL
stride = bpp * width < 2^32
size = stride * height < 2^32
PAGE_ALIGN(size) < 2^32
At least the udl driver doesn't check for multiplication-overflows, so
lets just make sure it will never happen. These checks allow drivers to do
any 32bit math without having to test for mult-overflows themselves.
The two divisions might hurt performance a bit, but dumb_create() is only
used for scanout-buffers, so that should be fine. We could use 64bit math
to avoid the divisions, but that may be slow on 32bit machines.. Or maybe
there should just be a "safe_mult32()" helper, which currently doesn't
exist (I think?).
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
All drivers currently need to clean up the vma-node manually. There is no
fancy logic involved so lets just clean it up unconditionally. The
vma-manager correctly catches multiple calls so we are fine.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Probably a typo.. we obviously need "(bpp + 7) / 8" instead of
"(bpp + 1) / 8". Unlikely to be hit in any sane code, but lets be safe.
Use DIV_ROUND_UP() to avoid the problem entirely and make the core more
readable.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
We need to call dma_buf_end_cpu_access() in case a damage-request.
Unlikely, but might happen during device unplug.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
This is a set of six fixes. Two are instant crash/null deref types (storvsc
and isci). The two qla2xxx are initialisation problems that cause MSI-X
failures and card misdetection, the isci erroneous macro is actually illegal C
that's causing a miscompile with certain gcc versions and the be2iscsi bad if
expression is a static checker fix.
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJTJI/eAAoJEDeqqVYsXL0MSLkH/2uYBN9YkO6rkafxcIUYY0Ck
8+3xf7qdLVaEYoERkXQOncHg8r0BYWaUl0oi/K5nzq4chvMH3SW5L360SYRLT6Hs
0F2pFZ2bO192FPBSB2zxrkSDYmEtzBviUFbiWwVH2i1GJCGDMvI9TfDVbdnfF5Eh
YB5INjZQ0r5eS45uR5xo5VTotMOUd/3lfYCfcOLDB77SzkX280+OUXJOxRND4QtM
xKcWCahSR2ALzxy4+OUsSHsQNizjEufeDiTij1h9GJctbtPXgm4hRO04AEB2a0aQ
OBI5kKZobqh5DJgknBsASvYNDOaVOVlzML5Qs9m+ie1IEQBOtV6u1rQAONThy/8=
=1qQW
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"This is a set of six fixes. Two are instant crash/null deref types
(storvsc and isci). The two qla2xxx are initialisation problems that
cause MSI-X failures and card misdetection, the isci erroneous macro
is actually illegal C that's causing a miscompile with certain gcc
versions and the be2iscsi bad if expression is a static checker fix"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
[SCSI] storvsc: NULL pointer dereference fix
[SCSI] qla2xxx: Poll during initialization for ISP25xx and ISP83xx
[SCSI] isci: correct erroneous for_each_isci_host macro
[SCSI] isci: fix reset timeout handling
[SCSI] be2iscsi: fix bad if expression
[SCSI] qla2xxx: Fix multiqueue MSI-X registration.
Since the last time I've looked more of this stuff sprouted up. Stomp
it down again.
Repeating the original justification for ripping this all out: There's
absolutely no need to deteach connectors before cleaning them up at
driver unload time. And since drm doesn't support hotplugging kms
objects at all it's positively dangerous to attempt this at runtime.
Luckily imx only detachs at driver cleanup time and hence we can
savely remove this.
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Pull x86 fixes from Peter Anvin:
"Two x86 fixes: Suresh's eager FPU fix, and a fix to the NUMA quirk for
AMD northbridges.
This only includes Suresh's fix patch, not the "mostly a cleanup"
patch which had __init issues"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/amd/numa: Fix northbridge quirk to assign correct NUMA node
x86, fpu: Check tsk_used_math() in kernel_fpu_end() for eager FPU
- A recent ACPI resources handling fix overlooked the fact that it had
to update the ACPI PNP subsystem's resources parsing too and caused
confusing warning messages to be printed during system intialization
on some systems (with arguably buggy ACPI tables). Fix from Zhang Rui.
- Moving the early ACPI initialization before timekeeping_init() earlier
in this cycle broke fast TSC calibration on at least one system, so it
needs to be done later, but still before efi_enter_virtual_mode() to
allow the EFI initialization to refer to ACPI.
- A change related to code duplication reduction in the cpufreq core
inadvertently caused cpufreq intialization to fail for some CPUs
handled by intel_pstate by adding checks that may fail for that
driver, but aren't even necessary when it is used. The issue is
addressed by preventing those checks from run in the configurations
in which they aren't needed.
- If the Hardware Reduced ACPI flag is set in the ACPI tables, system
suspend, hibernation and ACPI power off will only work when special
sleep control and sleep status registeres are provided (their
addresses in the ACPI tables are not zero). If those registers are
not available, the features in question have no chances to work,
so they shouldn't even be regarded as supported. That helps with
power off in particular, because alternative power off methods may
be used then and they may actually work.
/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=d2+L
-----END PGP SIGNATURE-----
Merge tag 'pm+acpi-3.14-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI and power management fixes from Rafael Wysocki:
"Three of these are regression fixes, for two recent regressions and
one introduced during the 3.13 cycle, and the fourth one is a working
version of the fix that had to be reverted last time.
Specifics:
- A recent ACPI resources handling fix overlooked the fact that it
had to update the ACPI PNP subsystem's resources parsing too and
caused confusing warning messages to be printed during system
intialization on some systems (with arguably buggy ACPI tables).
Fix from Zhang Rui.
- Moving the early ACPI initialization before timekeeping_init()
earlier in this cycle broke fast TSC calibration on at least one
system, so it needs to be done later, but still before
efi_enter_virtual_mode() to allow the EFI initialization to refer
to ACPI.
- A change related to code duplication reduction in the cpufreq core
inadvertently caused cpufreq intialization to fail for some CPUs
handled by intel_pstate by adding checks that may fail for that
driver, but aren't even necessary when it is used. The issue is
addressed by preventing those checks from run in the configurations
in which they aren't needed.
- If the Hardware Reduced ACPI flag is set in the ACPI tables, system
suspend, hibernation and ACPI power off will only work when special
sleep control and sleep status registeres are provided (their
addresses in the ACPI tables are not zero). If those registers are
not available, the features in question have no chances to work, so
they shouldn't even be regarded as supported. That helps with
power off in particular, because alternative power off methods may
be used then and they may actually work"
* tag 'pm+acpi-3.14-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI / sleep: Add extra checks for HW Reduced ACPI mode sleep states
ACPI / init: Invoke early ACPI initialization later
cpufreq: Skip current frequency initialization for ->setpolicy drivers
PNP / ACPI: proper handling of ACPI IO/Memory resource parsing failures
- fix corruption with >2TB fast device due to truncation bug
- fix access beyond end of origin device due to a partial block
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJTIxzQAAoJEMUj8QotnQNa2AkIAMXpgGCvxAtuE072ARf2kwxx
qtTtdYms/r1ss8keOgACSDgcrn+NMjk4IP4+s54Iz7tViEgIF148gvqgbSeHwNzk
Vy49aIbVPj8GIqFxuFeS03DnBZ/loEWiLtiHG2BgKnNRy1NmLvGwLoYsrrn9RHWG
AAa4a2cCW/BcrYMJoZSYhlPEEPPvoqSpWTVJr1rjTkmQAAZSsOzsBdklkrEQtHzW
Sle8/OKp4tYwBmXml5XsfAPG+pNRkd7HizIRkJ0roP5iIWHLdnpGUvboKYdu1rVp
rxEl/nQeXzd8zDsUNvoRQs8CLmtEhBBj0h+L+P2Y3Aj7fNg67ismt25mplQWZsY=
=/XEY
-----END PGP SIGNATURE-----
Merge tag 'dm-3.14-fixes-4' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device-mapper fixes form Mike Snitzer:
"Two small fixes for the DM cache target:
- fix corruption with >2TB fast device due to truncation bug
- fix access beyond end of origin device due to a partial block"
* tag 'dm-3.14-fixes-4' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm cache: fix access beyond end of origin device
dm cache: fix truncation bug when copying a block to/from >2TB fast device
For systems with multiple servers and routed fabric, all
northbridges get assigned to the first server. Fix this by also
using the node reported from the PCI bus. For single-fabric
systems, the northbriges are on PCI bus 0 by definition, which
are on NUMA node 0 by definition, so this is invarient on most
systems.
Tested on fam10h and fam15h single and multi-fabric systems and
candidate for stable.
Signed-off-by: Daniel J Blueman <daniel@numascale.com>
Acked-by: Steffen Persvold <sp@numascale.com>
Acked-by: Borislav Petkov <bp@suse.de>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/1394710981-3596-1-git-send-email-daniel@numascale.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull drm fixes from Dave Airlie:
"Pretty minor set of fixes for radeon, ttm and vmwgfx. The ttm ones
are a regression and an oops seen on server chipsets"
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
drm/vmwgfx: Fix a surface reference corner-case in legacy emulation mode
drm/radeon/cik: properly set compute ring status on disable
drm/radeon/cik: stop the sdma engines in the enable() function
drm/radeon/cik: properly set sdma ring status on disable
drm/radeon: fix runpm disabling on non-PX harder
drm/ttm: don't oops if no invalidate_caches()
drm/ttm: Work around performance regression with VM_PFNMAP
Pull i2c Kconfig fix from Wolfram Sang.
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: Remove usage of orphaned symbol OF_I2C
