2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-15 08:44:14 +08:00
Commit Graph

15 Commits

Author SHA1 Message Date
Rosen, Rami
bd4508e850 core: remove unneded headers for net cgroup controllers.
commit 3ed80a6 (cgroup: drop module support) made including
module.h redundant in the net cgroup controllers,
netclassid_cgroup.c and netprio_cgroup.c. This patch
removes them.

Signed-off-by: Rami Rosen <rami.rosen@intel.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-17 15:31:27 -05:00
David S. Miller
b3e0d3d7ba Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
	drivers/net/geneve.c

Here we had an overlapping change, where in 'net' the extraneous stats
bump was being removed whilst in 'net-next' the final argument to
udp_tunnel6_xmit_skb() was being changed.

Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-17 22:08:28 -05:00
Tejun Heo
bd1060a1d6 sock, cgroup: add sock->sk_cgroup
In cgroup v1, dealing with cgroup membership was difficult because the
number of membership associations was unbound.  As a result, cgroup v1
grew several controllers whose primary purpose is either tagging
membership or pull in configuration knobs from other subsystems so
that cgroup membership test can be avoided.

net_cls and net_prio controllers are examples of the latter.  They
allow configuring network-specific attributes from cgroup side so that
network subsystem can avoid testing cgroup membership; unfortunately,
these are not only cumbersome but also problematic.

Both net_cls and net_prio aren't properly hierarchical.  Both inherit
configuration from the parent on creation but there's no interaction
afterwards.  An ancestor doesn't restrict the behavior in its subtree
in anyway and configuration changes aren't propagated downwards.
Especially when combined with cgroup delegation, this is problematic
because delegatees can mess up whatever network configuration
implemented at the system level.  net_prio would allow the delegatees
to set whatever priority value regardless of CAP_NET_ADMIN and net_cls
the same for classid.

While it is possible to solve these issues from controller side by
implementing hierarchical allowable ranges in both controllers, it
would involve quite a bit of complexity in the controllers and further
obfuscate network configuration as it becomes even more difficult to
tell what's actually being configured looking from the network side.
While not much can be done for v1 at this point, as membership
handling is sane on cgroup v2, it'd be better to make cgroup matching
behave like other network matches and classifiers than introducing
further complications.

In preparation, this patch updates sock->sk_cgrp_data handling so that
it points to the v2 cgroup that sock was created in until either
net_prio or net_cls is used.  Once either of the two is used,
sock->sk_cgrp_data reverts to its previous role of carrying prioidx
and classid.  This is to avoid adding yet another cgroup related field
to struct sock.

As the mode switching can happen at most once per boot, the switching
mechanism is aimed at lowering hot path overhead.  It may leak a
finite, likely small, number of cgroup refs and report spurious
prioidx or classid on switching; however, dynamic updates of prioidx
and classid have always been racy and lossy - socks between creation
and fd installation are never updated, config changes don't update
existing sockets at all, and prioidx may index with dead and recycled
cgroup IDs.  Non-critical inaccuracies from small race windows won't
make any noticeable difference.

This patch doesn't make use of the pointer yet.  The following patch
will implement netfilter match for cgroup2 membership.

v2: Use sock_cgroup_data to avoid inflating struct sock w/ another
    cgroup specific field.

v3: Add comments explaining why sock_data_prioidx() and
    sock_data_classid() use different fallback values.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Daniel Wagner <daniel.wagner@bmw-carit.de>
CC: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-08 22:02:33 -05:00
Tejun Heo
2a56a1fec2 net: wrap sock->sk_cgrp_prioidx and ->sk_classid inside a struct
Introduce sock->sk_cgrp_data which is a struct sock_cgroup_data.
->sk_cgroup_prioidx and ->sk_classid are moved into it.  The struct
and its accessors are defined in cgroup-defs.h.  This is to prepare
for overloading the fields with a cgroup pointer.

This patch mostly performs equivalent conversions but the followings
are noteworthy.

* Equality test before updating classid is removed from
  sock_update_classid().  This shouldn't make any noticeable
  difference and a similar test will be implemented on the helper side
  later.

* sock_update_netprioidx() now takes struct sock_cgroup_data and can
  be moved to netprio_cgroup.h without causing include dependency
  loop.  Moved.

* The dummy version of sock_update_netprioidx() converted to a static
  inline function while at it.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-08 22:02:33 -05:00
Tejun Heo
0b98f0c042 Merge branch 'master' into for-4.4-fixes
The following commit which went into mainline through networking tree

  3b13758f51 ("cgroups: Allow dynamically changing net_classid")

conflicts in net/core/netclassid_cgroup.c with the following pending
fix in cgroup/for-4.4-fixes.

  1f7dd3e5a6 ("cgroup: fix handling of multi-destination migration from subtree_control enabling")

The former separates out update_classid() from cgrp_attach() and
updates it to walk all fds of all tasks in the target css so that it
can be used from both migration and config change paths.  The latter
drops @css from cgrp_attach().

Resolve the conflict by making cgrp_attach() call update_classid()
with the css from the first task.  We can revive @tset walking in
cgrp_attach() but given that net_cls is v1 only where there always is
only one target css during migration, this is fine.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Nina Schiff <ninasc@fb.com>
2015-12-07 10:09:03 -05:00
Tejun Heo
1f7dd3e5a6 cgroup: fix handling of multi-destination migration from subtree_control enabling
Consider the following v2 hierarchy.

  P0 (+memory) --- P1 (-memory) --- A
                                 \- B
       
P0 has memory enabled in its subtree_control while P1 doesn't.  If
both A and B contain processes, they would belong to the memory css of
P1.  Now if memory is enabled on P1's subtree_control, memory csses
should be created on both A and B and A's processes should be moved to
the former and B's processes the latter.  IOW, enabling controllers
can cause atomic migrations into different csses.

The core cgroup migration logic has been updated accordingly but the
controller migration methods haven't and still assume that all tasks
migrate to a single target css; furthermore, the methods were fed the
css in which subtree_control was updated which is the parent of the
target csses.  pids controller depends on the migration methods to
move charges and this made the controller attribute charges to the
wrong csses often triggering the following warning by driving a
counter negative.

 WARNING: CPU: 1 PID: 1 at kernel/cgroup_pids.c:97 pids_cancel.constprop.6+0x31/0x40()
 Modules linked in:
 CPU: 1 PID: 1 Comm: systemd Not tainted 4.4.0-rc1+ #29
 ...
  ffffffff81f65382 ffff88007c043b90 ffffffff81551ffc 0000000000000000
  ffff88007c043bc8 ffffffff810de202 ffff88007a752000 ffff88007a29ab00
  ffff88007c043c80 ffff88007a1d8400 0000000000000001 ffff88007c043bd8
 Call Trace:
  [<ffffffff81551ffc>] dump_stack+0x4e/0x82
  [<ffffffff810de202>] warn_slowpath_common+0x82/0xc0
  [<ffffffff810de2fa>] warn_slowpath_null+0x1a/0x20
  [<ffffffff8118e031>] pids_cancel.constprop.6+0x31/0x40
  [<ffffffff8118e0fd>] pids_can_attach+0x6d/0xf0
  [<ffffffff81188a4c>] cgroup_taskset_migrate+0x6c/0x330
  [<ffffffff81188e05>] cgroup_migrate+0xf5/0x190
  [<ffffffff81189016>] cgroup_attach_task+0x176/0x200
  [<ffffffff8118949d>] __cgroup_procs_write+0x2ad/0x460
  [<ffffffff81189684>] cgroup_procs_write+0x14/0x20
  [<ffffffff811854e5>] cgroup_file_write+0x35/0x1c0
  [<ffffffff812e26f1>] kernfs_fop_write+0x141/0x190
  [<ffffffff81265f88>] __vfs_write+0x28/0xe0
  [<ffffffff812666fc>] vfs_write+0xac/0x1a0
  [<ffffffff81267019>] SyS_write+0x49/0xb0
  [<ffffffff81bcef32>] entry_SYSCALL_64_fastpath+0x12/0x76

This patch fixes the bug by removing @css parameter from the three
migration methods, ->can_attach, ->cancel_attach() and ->attach() and
updating cgroup_taskset iteration helpers also return the destination
css in addition to the task being migrated.  All controllers are
updated accordingly.

* Controllers which don't care whether there are one or multiple
  target csses can be converted trivially.  cpu, io, freezer, perf,
  netclassid and netprio fall in this category.

* cpuset's current implementation assumes that there's single source
  and destination and thus doesn't support v2 hierarchy already.  The
  only change made by this patchset is how that single destination css
  is obtained.

* memory migration path already doesn't do anything on v2.  How the
  single destination css is obtained is updated and the prep stage of
  mem_cgroup_can_attach() is reordered to accomodate the change.

* pids is the only controller which was affected by this bug.  It now
  correctly handles multi-destination migrations and no longer causes
  counter underflow from incorrect accounting.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-and-tested-by: Daniel Wagner <daniel.wagner@bmw-carit.de>
Cc: Aleksa Sarai <cyphar@cyphar.com>
2015-12-03 10:18:21 -05:00
Nina Schiff
3b13758f51 cgroups: Allow dynamically changing net_classid
The classid of a process is changed either when a process is moved to
or from a cgroup or when the net_cls.classid file is updated.
Previously net_cls only supported propogating these changes to the
cgroup's related sockets when a process was added or removed from the
cgroup. This means it was neccessary to remove and re-add all processes
to a cgroup in order to update its classid. This change introduces
support for doing this dynamically - i.e. when the value is changed in
the net_cls_classid file, this will also trigger an update to the
classid associated with all sockets controlled by the cgroup.
This mimics the behaviour of other cgroup subsystems.
net_prio circumvents this issue by storing an index into a table with
each socket (and so any updates to the table, don't require updating
the value associated with the socket). net_cls, however, passes the
socket the classid directly, and so this additional step is needed.

Signed-off-by: Nina Schiff <ninasc@fb.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-23 12:13:46 -05:00
Konstantin Khlebnikov
cc9f4daa63 cgroup: net_cls: fix false-positive "suspicious RCU usage"
In dev_queue_xmit() net_cls protected with rcu-bh.

[  270.730026] ===============================
[  270.730029] [ INFO: suspicious RCU usage. ]
[  270.730033] 4.2.0-rc3+ #2 Not tainted
[  270.730036] -------------------------------
[  270.730040] include/linux/cgroup.h:353 suspicious rcu_dereference_check() usage!
[  270.730041] other info that might help us debug this:
[  270.730043] rcu_scheduler_active = 1, debug_locks = 1
[  270.730045] 2 locks held by dhclient/748:
[  270.730046]  #0:  (rcu_read_lock_bh){......}, at: [<ffffffff81682b70>] __dev_queue_xmit+0x50/0x960
[  270.730085]  #1:  (&qdisc_tx_lock){+.....}, at: [<ffffffff81682d60>] __dev_queue_xmit+0x240/0x960
[  270.730090] stack backtrace:
[  270.730096] CPU: 0 PID: 748 Comm: dhclient Not tainted 4.2.0-rc3+ #2
[  270.730098] Hardware name: OpenStack Foundation OpenStack Nova, BIOS Bochs 01/01/2011
[  270.730100]  0000000000000001 ffff8800bafeba58 ffffffff817ad487 0000000000000007
[  270.730103]  ffff880232a0a780 ffff8800bafeba88 ffffffff810ca4f2 ffff88022fb23e00
[  270.730105]  ffff880232a0a780 ffff8800bafebb68 ffff8800bafebb68 ffff8800bafebaa8
[  270.730108] Call Trace:
[  270.730121]  [<ffffffff817ad487>] dump_stack+0x4c/0x65
[  270.730148]  [<ffffffff810ca4f2>] lockdep_rcu_suspicious+0xe2/0x120
[  270.730153]  [<ffffffff816a62d2>] task_cls_state+0x92/0xa0
[  270.730158]  [<ffffffffa00b534f>] cls_cgroup_classify+0x4f/0x120 [cls_cgroup]
[  270.730164]  [<ffffffff816aac74>] tc_classify_compat+0x74/0xc0
[  270.730166]  [<ffffffff816ab573>] tc_classify+0x33/0x90
[  270.730170]  [<ffffffffa00bcb0a>] htb_enqueue+0xaa/0x4a0 [sch_htb]
[  270.730172]  [<ffffffff81682e26>] __dev_queue_xmit+0x306/0x960
[  270.730174]  [<ffffffff81682b70>] ? __dev_queue_xmit+0x50/0x960
[  270.730176]  [<ffffffff816834a3>] dev_queue_xmit_sk+0x13/0x20
[  270.730185]  [<ffffffff81787770>] dev_queue_xmit+0x10/0x20
[  270.730187]  [<ffffffff8178b91c>] packet_snd.isra.62+0x54c/0x760
[  270.730190]  [<ffffffff8178be25>] packet_sendmsg+0x2f5/0x3f0
[  270.730203]  [<ffffffff81665245>] ? sock_def_readable+0x5/0x190
[  270.730210]  [<ffffffff817b64bb>] ? _raw_spin_unlock+0x2b/0x40
[  270.730216]  [<ffffffff8173bcbc>] ? unix_dgram_sendmsg+0x5cc/0x640
[  270.730219]  [<ffffffff8165f367>] sock_sendmsg+0x47/0x50
[  270.730221]  [<ffffffff8165f42f>] sock_write_iter+0x7f/0xd0
[  270.730232]  [<ffffffff811fd4c7>] __vfs_write+0xa7/0xf0
[  270.730234]  [<ffffffff811fe5b8>] vfs_write+0xb8/0x190
[  270.730236]  [<ffffffff811fe8c2>] SyS_write+0x52/0xb0
[  270.730239]  [<ffffffff817b6bae>] entry_SYSCALL_64_fastpath+0x12/0x76

Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-25 00:13:18 -07:00
Tejun Heo
5577964e64 cgroup: rename cgroup_subsys->base_cftypes to ->legacy_cftypes
Currently, cgroup_subsys->base_cftypes is used for both the unified
default hierarchy and legacy ones and subsystems can mark each file
with either CFTYPE_ONLY_ON_DFL or CFTYPE_INSANE if it has to appear
only on one of them.  This is quite hairy and error-prone.  Also, we
may end up exposing interface files to the default hierarchy without
thinking it through.

cgroup_subsys will grow two separate cftype arrays and apply each only
on the hierarchies of the matching type.  This will allow organizing
cftypes in a lot clearer way and encourage subsystems to scrutinize
the interface which is being exposed in the new default hierarchy.

In preparation, this patch renames cgroup_subsys->base_cftypes to
cgroup_subsys->legacy_cftypes.  This patch is pure rename.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Li Zefan <lizefan@huawei.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Aristeu Rozanski <aris@redhat.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
2014-07-15 11:05:09 -04:00
Tejun Heo
5c9d535b89 cgroup: remove css_parent()
cgroup in general is moving towards using cgroup_subsys_state as the
fundamental structural component and css_parent() was introduced to
convert from using cgroup->parent to css->parent.  It was quite some
time ago and we're moving forward with making css more prominent.

This patch drops the trivial wrapper css_parent() and let the users
dereference css->parent.  While at it, explicitly mark fields of css
which are public and immutable.

v2: New usage from device_cgroup.c converted.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Michal Hocko <mhocko@suse.cz>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: "David S. Miller" <davem@davemloft.net>
Acked-by: Li Zefan <lizefan@huawei.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Johannes Weiner <hannes@cmpxchg.org>
2014-05-16 13:22:48 -04:00
Tejun Heo
924f0d9a20 cgroup: drop @skip_css from cgroup_taskset_for_each()
If !NULL, @skip_css makes cgroup_taskset_for_each() skip the matching
css.  The intention of the interface is to make it easy to skip css's
(cgroup_subsys_states) which already match the migration target;
however, this is entirely unnecessary as migration taskset doesn't
include tasks which are already in the target cgroup.  Drop @skip_css
from cgroup_taskset_for_each().

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: Daniel Borkmann <dborkman@redhat.com>
2014-02-13 06:58:41 -05:00
Tejun Heo
073219e995 cgroup: clean up cgroup_subsys names and initialization
cgroup_subsys is a bit messier than it needs to be.

* The name of a subsys can be different from its internal identifier
  defined in cgroup_subsys.h.  Most subsystems use the matching name
  but three - cpu, memory and perf_event - use different ones.

* cgroup_subsys_id enums are postfixed with _subsys_id and each
  cgroup_subsys is postfixed with _subsys.  cgroup.h is widely
  included throughout various subsystems, it doesn't and shouldn't
  have claim on such generic names which don't have any qualifier
  indicating that they belong to cgroup.

* cgroup_subsys->subsys_id should always equal the matching
  cgroup_subsys_id enum; however, we require each controller to
  initialize it and then BUG if they don't match, which is a bit
  silly.

This patch cleans up cgroup_subsys names and initialization by doing
the followings.

* cgroup_subsys_id enums are now postfixed with _cgrp_id, and each
  cgroup_subsys with _cgrp_subsys.

* With the above, renaming subsys identifiers to match the userland
  visible names doesn't cause any naming conflicts.  All non-matching
  identifiers are renamed to match the official names.

  cpu_cgroup -> cpu
  mem_cgroup -> memory
  perf -> perf_event

* controllers no longer need to initialize ->subsys_id and ->name.
  They're generated in cgroup core and set automatically during boot.

* Redundant cgroup_subsys declarations removed.

* While updating BUG_ON()s in cgroup_init_early(), convert them to
  WARN()s.  BUGging that early during boot is stupid - the kernel
  can't print anything, even through serial console and the trap
  handler doesn't even link stack frame properly for back-tracing.

This patch doesn't introduce any behavior changes.

v2: Rebased on top of fe1217c4f3 ("net: net_cls: move cgroupfs
    classid handling into core").

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: "David S. Miller" <davem@davemloft.net>
Acked-by: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Acked-by: Michal Hocko <mhocko@suse.cz>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Aristeu Rozanski <aris@redhat.com>
Acked-by: Ingo Molnar <mingo@redhat.com>
Acked-by: Li Zefan <lizefan@huawei.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Serge E. Hallyn <serue@us.ibm.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Thomas Graf <tgraf@suug.ch>
2014-02-08 10:36:58 -05:00
Tejun Heo
3ed80a62bf cgroup: drop module support
With module supported dropped from net_prio, no controller is using
cgroup module support.  None of actual resource controllers can be
built as a module and we aren't gonna add new controllers which don't
control resources.  This patch drops module support from cgroup.

* cgroup_[un]load_subsys() and cgroup_subsys->module removed.

* As there's no point in distinguishing IS_BUILTIN() and IS_MODULE(),
  cgroup_subsys.h now uses IS_ENABLED() directly.

* enum cgroup_subsys_id now exactly matches the list of enabled
  controllers as ordered in cgroup_subsys.h.

* cgroup_subsys[] is now a contiguously occupied array.  Size
  specification is no longer necessary and dropped.

* for_each_builtin_subsys() is removed and for_each_subsys() is
  updated to not require any locking.

* module ref handling is removed from rebind_subsystems().

* Module related comments dropped.

v2: Rebased on top of fe1217c4f3 ("net: net_cls: move cgroupfs
    classid handling into core").

v3: Added {} around the if (need_forkexit_callback) block in
    cgroup_post_fork() for readability as suggested by Li.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
2014-02-08 10:36:58 -05:00
Tejun Heo
af6363374c cgroup: make CONFIG_CGROUP_NET_PRIO bool and drop unnecessary init_netclassid_cgroup()
net_prio is the only cgroup which is allowed to be built as a module.
The savings from allowing one controller to be built as a module are
tiny especially given that cgroup module support itself adds quite a
bit of complexity.

Given that none of other controllers has much chance of being made a
module and that we're unlikely to add new modular controllers, the
added complexity is simply not justifiable.

As a first step to drop cgroup module support, this patch changes the
config option to bool from tristate and drops module related code from
it.

Also, while an earlier commit fe1217c4f3 ("net: net_cls: move
cgroupfs classid handling into core") dropped module support from
net_cls cgroup, it retained a call to cgroup_load_subsys(), which is
noop for built-in controllers.  Drop it along with
init_netclassid_cgroup().

v2: Removed modular version of task_netprioidx() in
    include/net/netprio_cgroup.h as suggested by Li Zefan.

v3: Rebased on top of fe1217c4f3 ("net: net_cls: move cgroupfs
    classid handling into core").  net_cls cgroup part is mostly
    dropped except for removal of init_netclassid_cgroup().

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: "David S. Miller" <davem@davemloft.net>
Acked-by: Li Zefan <lizefan@huawei.com>
Cc: Thomas Graf <tgraf@suug.ch>
2014-02-08 10:36:58 -05:00
Daniel Borkmann
fe1217c4f3 net: net_cls: move cgroupfs classid handling into core
Zefan Li requested [1] to perform the following cleanup/refactoring:

- Split cgroupfs classid handling into net core to better express a
  possible more generic use.

- Disable module support for cgroupfs bits as the majority of other
  cgroupfs subsystems do not have that, and seems to be not wished
  from cgroup side. Zefan probably might want to follow-up for netprio
  later on.

- By this, code can be further reduced which previously took care of
  functionality built when compiled as module.

cgroupfs bits are being placed under net/core/netclassid_cgroup.c, so
that we are consistent with {netclassid,netprio}_cgroup naming that is
under net/core/ as suggested by Zefan.

No change in functionality, but only code refactoring that is being
done here.

 [1] http://patchwork.ozlabs.org/patch/304825/

Suggested-by: Li Zefan <lizefan@huawei.com>
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: Thomas Graf <tgraf@suug.ch>
Cc: cgroups@vger.kernel.org
Acked-by: Li Zefan <lizefan@huawei.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2014-01-03 23:41:41 +01:00