2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-23 12:43:55 +08:00
Commit Graph

90190 Commits

Author SHA1 Message Date
Qiao Zhou
b9f10a10cd ARM: mmp: build sram driver alone
sram driver can be used by many chips besides CPU_MMP2, and so build
it alone. Also need to select MMP_SRAM for MMP_TDMA driver.

Reported-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Qiao Zhou <zhouqiao@marvell.com>
Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-11 17:33:02 -08:00
Thierry Reding
2473de06b0 ARM: pxa: Remove unused variables
The conf and of_id variables are assigned but never used, so they may as
well just be removed.

Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Acked-by: Daniel Mack <zonque@gmail.com>
Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-11 17:33:01 -08:00
Michael Opdenacker
ed7936f913 ARM: pxa: remove IRQF_DISABLED
This flag is a NOOP since 2.6.35 and can be removed.

Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com>
Acked-by: Eric Miao <eric.y.miao@gmail.com>
Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>
[olof: Fixed compilation failure for pcm990-baseboard]
Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-11 17:32:41 -08:00
Nicolas Pitre
f45913fde0 ARM: clean up cache handling in platform code
We have a handy macro to replace open coded __cpuc_flush_dcache_area(()
and outer_clean_range() sequences. Let's use it. No functional change.

Signed-off-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-11 16:24:34 -08:00
Yanis Moreno
bc34eb53ab ARM: at91: remove redundant dependency
This removes the "depends on SOC_SAM_V7" statement
in a Kconfig section that's under an "if SOC_SAM_V7"
condition (same parameter).

Signed-off-by: Yanis Moreno <yanis.moreno63@gmail.com>
Reviewed-by: Michael Opdenacker <michael.opdenacker@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-11 16:23:10 -08:00
Olof Johansson
94c5216ee9 AT91: Move to Common Clock Framework and sama5d3 implementation
This is the first step to move AT91 to the CCF.
 - core CCF and drivers for most of the clocks
 - use of CCF for sama5d3 (100% DT-based)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQEcBAABAgAGBQJSnLhVAAoJEAf03oE53VmQugkH/11ZuSaLsjn31/WvE4WwKdgc
 RCIx7r8BCmPLNwDFOgc7tsheH7Jb6I7BNv4MnX8NIPrcAGy6yCEaD8TqhwKGTs9s
 2YGoKB48fpwm1udDc6Hfq3/yqkPvM7AnzE1ei1rJNmLt2582tlX1FI+klQG5EoUK
 23Pf4yjxtxt31s6xjuvRjEVjEat4PWnuVLs0nZWK6mizApXjA1JPIsKS6NL7q+eG
 aBMWDGw0DW4M8VEHAZygxF16PRXnumuB7NAIxKp8SJW5/acSeQntJTNXisMQBem7
 DxWfvK7WAFEBGUcRN33a9RpKaHg0Gur1If2sw6CkZ83RnRV9CLqURty1mO4WCUo=
 =B+yP
 -----END PGP SIGNATURE-----

Merge tag 'at91-cleanup' of git://github.com/at91linux/linux-at91 into next/cleanup

From Nicolas Ferre:
AT91: Move to Common Clock Framework and sama5d3 implementation
This is the first step to move AT91 to the CCF.
- core CCF and drivers for most of the clocks
- use of CCF for sama5d3 (100% DT-based)

* tag 'at91-cleanup' of git://github.com/at91linux/linux-at91: (22 commits)
  ARM: at91/dt: remove old clk material
  ARM: at91: move sama5d3 SoC to common clk
  ARM: at91/dt: define sama5d3xek's main clk frequency
  ARM: at91/dt: define sama5d3 clocks
  ARM: at91: prepare common clk transition for sama5d3 SoC
  ARM: at91: prepare sama5 dt boards transition to common clk
  ARM: at91: add new compatible strings for pmc driver
  ARM: at91: move pit timer to common clk framework
  dt: binding: add at91 clks dt bindings documentation
  clk: at91: add PMC smd clock
  clk: at91: add PMC usb clock
  clk: at91: add PMC utmi clock
  clk: at91: add PMC programmable clocks
  clk: at91: add PMC peripheral clocks
  clk: at91: add PMC system clocks
  clk: at91: add PMC master clock
  clk: at91: add PMC pll clocks
  clk: at91: add PMC main clock
  clk: at91: add PMC macro file for dt definitions
  clk: at91: add PMC base support
  ...

Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-04 13:50:33 -08:00
Olof Johansson
330641ceba Merge commit 'fixes' into next/cleanup
Merging in post-rc1 fixes that have gone into rc2/3 to avoid later conflicts.

* commit 'fixes': (39 commits)
  arm: dts: socfpga: Change some clocks of gate-clk type to perip-clk
  arm: socfpga: Enable ARM_TWD for socfpga
  ARM: multi_v7_defconfig: enable SDHCI_BCM_KONA and MMC_BLOCK_MINORS=16
  ARM: sunxi_defconfig: enable NFS, TMPFS, PRINTK_TIME and nfsroot support
  ARM: multi_v7_defconfig: enable network for BeagleBone Black
  ARM: dts: Fix the name of supplies for smsc911x shared by OMAP
  ARM: OMAP2+: Powerdomain: Fix unchecked dereference of arch_pwrdm
  ARM: dts: omap3-beagle: Add omap-twl4030 audio support
  ARM: dts: omap4-sdp: Fix pin muxing for wl12xx
  ARM: dts: omap4-panda-common: Fix pin muxing for wl12xx
  ARM: at91: fixed unresolved symbol "at91_pm_set_standby" when built without CONFIG_PM
  ARM: at91: add usart3 alias to dtsi
  ARM: at91: sama5d3: reduce TWI internal clock frequency
  mmc: omap: Fix I2C dependency and make driver usable with device tree
  mmc: omap: Fix DMA configuration to not rely on device id
  ARM: dts: omap3-beagle: Fix USB host on beagle boards (for 3.13)
  ARM: dts: omap3-igep0020: name twl4030 VPLL2 regulator as vdds_dsi
  ARM: dts: AM33XX IGEP0033: add USB support
  ARM: dts: AM33XX BASE0033: add 32KBit EEPROM support
  ARM: dts: AM33XX BASE0033: add pinmux and user led support
  ...

Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-04 13:49:22 -08:00
Olof Johansson
6316756922 mvebu soc changes for v3.14
- orion:
     - remove IRQF_DISABLED
     - directly include some .h files
 
  - mvebu:
     - remove some sparse warnings
 
  - orion5x:
     - include cleanup
     - warning removal for C=1
 
  - kirkwood:
     - remove legacy clock workarounds
     - stop rpinting a TCLK value of 0 for DT boards
 
  - dove:
     - warning removal for C=1
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJSm6KPAAoJEP45WPkGe8Zn7EQP/jrxv9Gjq/LZrUBNxMZyEedZ
 zvc7DgVAwH/TptH4kHyitnpOkcdY7gTTDmaL1r/Ch/MiGCDcb/5Q6AJ1AKJAezH1
 DJLkfBOrvvM8DMogIeBKzLCUMn+0z8vXUbiPBEo2mnbxCwq0leK+iFa1Uo0XzV5w
 i1kb15qYupCXs9u6oDnlJhh6Snx8UQXxJMdBSiG4W/A8h4yu7f1Zg3IrZ5sJfqyF
 wMwSNZ7JRIBXxh3lFVGJiACMx/SI3NEoAumDwHA8wm80uPqM0xjAS0ngRYlRWiqb
 h9RiRvw+ve1cQSUJvsV6dd2hvgoQT5WyK7QJpFljBfYFLttfesOQ0nIqpWMuTknT
 WO9GlmBdCC89fMYAIK0OAM4z0PxgLf+QVT8bEd0TnM7Qkt89QCbhT5DIzLKgZg68
 ShBOG8XXRU/Y4GozZUYglpSvhPhDag8IeM5eScObf1IkULJCeKanUrxqnRRkbDyK
 yXewlvvPzM3po6OOesK9au2zOjakzEcULS/ek0T0kvpICRrLL/LlKANstB+IfhfI
 /ly9WCOrquhyR+Rhl481soN0i4P8RjmkVURJV23UwzbCaMgIfg+GzqYfq/P9DS2t
 H9vwuI92ooVe5xQUvcitQf9XOj21yMP5ngDRZOiBv+8RYvQkCeOwFQjo+8Wrj+Bp
 earewiaYW2kXvkivdp6v
 =ZqNz
 -----END PGP SIGNATURE-----

Merge tag 'mvebu-soc-3.14' of git://git.infradead.org/linux-mvebu into next/cleanup

From Jason Cooper:
mvebu soc changes for v3.14

 - orion:
    - remove IRQF_DISABLED
    - directly include some .h files

 - mvebu:
    - remove some sparse warnings

 - orion5x:
    - include cleanup
    - warning removal for C=1

 - kirkwood:
    - remove legacy clock workarounds
    - stop rpinting a TCLK value of 0 for DT boards

 - dove:
    - warning removal for C=1

* tag 'mvebu-soc-3.14' of git://git.infradead.org/linux-mvebu:
  ARM: mvebu: fix some sparse warnings
  ARM: kirkwood: stop printk TCLK value at boot for DT boards
  ARM: orion5x: drop unused include from common.c
  ARM: Dove: Fix compiler warnings with C=1 builds
  ARM: Orion5x: Fix warnings when using C=1.
  ARM: Orion: Add missing includes
  ARM: kirkwood: remove lagacy clk workarounds
  arm: plat-orion: remove deprecated IRQF_DISABLED

Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-03 16:54:28 -08:00
Olof Johansson
6ecf49bc03 Renesas ARM based SoC cleanups for v3.14
* Tidy up clock table order for r7s72100, r8a7779, r8a7779, r8a7790,
   sh7372 and sh73a0 SoCs.
 * Tidy up camera-rcar header for r8a7779 SoC
 * Tidy up registration of VIN on r8a7779 SoC
 * Tidy up PFC registration on r8a7790 SoC
 * Correct typo in clocks for r8a7790 SoC
 * Don't use named resources for IPMMU, I2C and TMU on sh73a0 SoC
 * Don't use named resources for MMCIF and SDHI on ape6evm board
 * Don't use named resources for MMCIF on lager board
 * Tidy up device registration on lager board
 * Tidy up headers for bockw board
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.14 (GNU/Linux)
 
 iQIcBAABAgAGBQJSlwO4AAoJENfPZGlqN0++NHwP/04gSfdK7Pwz8euoS0rimysQ
 cs30CQooxSBuuMrasfyNDhjmRdYNqZinGFd3B7Ir7d/EPveGpQZIUKd30rnQKjvP
 OT7RYGY356I0Fgcq3pWYt7E1VJTPsmSIW+7WHAJ6Jc5VwGaWJLE8j43+KV6CZrhz
 MjtuL8aNuxJYLGuIPcFw30x1Pp+6tJUmiaQYIGs8+KoKXceYFvDF26s27zpsk5I2
 EDJWfZRi0lUjlGtN+Uc0UU3SFbMzSyKPakAGQxmUSaBVQiEfbQwMf5TNSZAnaqV0
 HOrMjp2gCO5pM04aTwpKG8me+HDkoSvee828wJShmlnE0x8BEWAB03VNnNciDY6r
 aFZN0HnSR2ARgUKtdYhXiAEGKtJkRJ7nZ4/KSlt4Lv6tQlgc8Oh1ewklvSJ2zHWR
 6njmZP8caHQ43+xeRoamIYOv+5zkIyBOx0sxQQqXZ32fyGbR3Cj8dnR5F30NN0+q
 vwiMVSZ9IrpQK9BUPY4KGvtWNo8fLa2QUPrvrzUUob+FCfO+quBfB4PU3xlV9/B1
 sO0RqDgEswLfr9/HLVEupxusxAkTMS1/4eYq3PGmwg9skHj9ymWvZCaYTI1iVW/D
 uSl6ZisFtBJD8//J7qK8u4fhcWYzDVymOPzT2/hh2kg93h/AMwUenAKJgsmnLvm4
 kiiiELRMlU9gOzjsCfug
 =v12l
 -----END PGP SIGNATURE-----

Merge tag 'renesas-cleanup-for-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/cleanup

From Simon Horman:

Renesas ARM based SoC cleanups for v3.14

* Tidy up clock table order for r7s72100, r8a7779, r8a7779, r8a7790,
  sh7372 and sh73a0 SoCs.
* Tidy up camera-rcar header for r8a7779 SoC
* Tidy up registration of VIN on r8a7779 SoC
* Tidy up PFC registration on r8a7790 SoC
* Correct typo in clocks for r8a7790 SoC
* Don't use named resources for IPMMU, I2C and TMU on sh73a0 SoC
* Don't use named resources for MMCIF and SDHI on ape6evm board
* Don't use named resources for MMCIF on lager board
* Tidy up device registration on lager board
* Tidy up headers for bockw board

* tag 'renesas-cleanup-for-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  ARM: shmobile: sh7372: tidyup clock table order
  ARM: shmobile: r7s72100: tidyup clock table order
  ARM: shmobile: sh73a0: tidyup clock table order
  ARM: shmobile: r8a7779: cleanup registration of sh_eth
  ARM: shmobile: r8a7790: Correct typo in clocks
  ARM: shmobile: r8a7779: camera-rcar header cleanup
  ARM: shmobile: Add r8a7790_register_pfc() function
  ARM: shmobile: Cosmetic update of Lager DT Reference
  ARM: shmobile: r8a7779: cleanup registration of VIN
  ARM: shmobile: bockw: header cleanup
  ARM: shmobile: sh73a0: don't use named resource for IPMMU
  ARM: shmobile: sh73a0: don't use named resource for I2C
  ARM: shmobile: sh73a0: don't use named resource for TMU
  ARM: shmobile: lager: don't use named resource for MMCIF
  ARM: shmobile: ape6evm: don't use named resource for SDHI
  ARM: shmobile: ape6evm: don't use named resource for MMCIF

Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-03 16:50:52 -08:00
Dinh Nguyen
a5c6e87a7b arm: dts: socfpga: Change some clocks of gate-clk type to perip-clk
Some of the clocks that were designated gate-clk do not have a gate, so
change those clocks to be of periph-clk type.

Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-03 14:19:53 -08:00
Dinh Nguyen
725dd7eb17 arm: socfpga: Enable ARM_TWD for socfpga
Update Kconfig to enable TWD.

Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
Reviewed-by: Pavel Machek <pavel@denx.de>
Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-03 14:19:48 -08:00
Olof Johansson
f39918eec7 ARM: multi_v7_defconfig: enable SDHCI_BCM_KONA and MMC_BLOCK_MINORS=16
Enable MMC/SD on the Broadcom mobile platforms, and increase the block
minors from the default 8 to 16 (since the Broadcom board by default
has root on the 8th partition).

Signed-off-by: Olof Johansson <olof@lixom.net>
Cc: stable@vger.kernel.org # v3.12
2013-12-03 12:39:14 -08:00
Olof Johansson
610ffd58db ARM: sunxi_defconfig: enable NFS, TMPFS, PRINTK_TIME and nfsroot support
This enables a few more options on the sunxi defconfigs such that I can
use nfsroot to boot them (there is no local storage support yet). It
also enables PRINTK_TIME and tmpfs since it's a common distro requirement.

Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-03 12:39:13 -08:00
Olof Johansson
82cca5dace Merge tag 'omap-for-v3.13/more-dt-regressions' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes
From Tony Lindgren:

Few more legacy booting vs device tree booting fixes that people
have noticed while booting things with device tree for things like
omap4 WLAN, smsc911x, and beagle audio. Hopefully this will be it
for the legacy booting vs device tree fixes for this -rc cycle.

* tag 'omap-for-v3.13/more-dt-regressions' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: dts: Fix the name of supplies for smsc911x shared by OMAP
  ARM: OMAP2+: Powerdomain: Fix unchecked dereference of arch_pwrdm
  ARM: dts: omap3-beagle: Add omap-twl4030 audio support
  ARM: dts: omap4-sdp: Fix pin muxing for wl12xx
  ARM: dts: omap4-panda-common: Fix pin muxing for wl12xx
2013-12-03 12:39:12 -08:00
Olof Johansson
0dfee674b3 ARM: multi_v7_defconfig: enable network for BeagleBone Black
BeagleBone Black uses the TI CPSW ethernet controller, enable it in the
multi_v7_defconfig for testing coverage purposes.

Signed-off-by: Olof Johansson <olof@lixom.net>
Acked-by: Tony Lindgren <tony@atomide.com>
Cc: stable@vger.kernel.org # v3.12
2013-12-03 12:39:11 -08:00
Olof Johansson
3060817fe8 Merge tag 'at91-fixes' of git://github.com/at91linux/linux-at91 into fixes
From Nicolas Ferre:
AT91: second round of fixes for 3.13
- reduce IP frequency for I2C on sama5d3
- missing aliases directive for USART3 on 9x5 family
- a PM symbol is missing if !CONFIG_PM

* tag 'at91-fixes' of git://github.com/at91linux/linux-at91:
  ARM: at91: fixed unresolved symbol "at91_pm_set_standby" when built without CONFIG_PM
  ARM: at91: add usart3 alias to dtsi
  ARM: at91: sama5d3: reduce TWI internal clock frequency
2013-12-03 12:39:10 -08:00
Olof Johansson
c0c3350c3c Merge tag 'mvebu-dt-fixes-3.13' of git://git.infradead.org/linux-mvebu into fixes
From Jason Cooper, mvebu DT fixes for v3.13:
 - mvebu
    - PCIe fixes now that we have test devices with more ports.
    - fix access to coherency registers

* tag 'mvebu-dt-fixes-3.13' of git://git.infradead.org/linux-mvebu:
  ARM: mvebu: re-enable PCIe on Armada 370 DB
  ARM: mvebu: use the virtual CPU registers to access coherency registers
  ARM: mvebu: fix second and third PCIe unit of Armada XP mv78260
  ARM: mvebu: second PCIe unit of Armada XP mv78230 is only x1 capable
2013-12-03 12:39:09 -08:00
Olof Johansson
b8be3a2279 Merge tag 'omap-for-v3.13/fixes-against-rc1-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes
From Tony Lindgren:

Some omap related fixes that have come up with people moving to device
tree only based booting for omap2+.

The series contains a handful of fixes for the igep boards as they were
one of the first omap3 boards to jump over completely to device tree
based booting. So these can be considered regressions compared to
booting igep in legacy mode with board files in v3.12.

Also included are few other device tree vs legacy booting regressions:

- yet more missing omap3 .dtsi entries that have showed up booting
  various boards with device tree only

- n900 eMMC device tree fix

- fixes for beagle USB EHCI

- two fixes to make omap2420 MMC work

As we're moving omap2+ to be device tree only for v3.14, I'd like to
have v3.13 work equally well for legacy based booting and device tree
based booting. So there will be likely few more device tree related
booting patches trickling in.

This series also includes a regression fix for the omap timer posted
mode that may wrongly stay on from the bootloader for some SoCs.

* tag 'omap-for-v3.13/fixes-against-rc1-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  mmc: omap: Fix I2C dependency and make driver usable with device tree
  mmc: omap: Fix DMA configuration to not rely on device id
  ARM: dts: omap3-beagle: Fix USB host on beagle boards (for 3.13)
  ARM: dts: omap3-igep0020: name twl4030 VPLL2 regulator as vdds_dsi
  ARM: dts: AM33XX IGEP0033: add USB support
  ARM: dts: AM33XX BASE0033: add 32KBit EEPROM support
  ARM: dts: AM33XX BASE0033: add pinmux and user led support
  ARM: dts: AM33XX BASE0033: add pinmux and hdmi node to enable display
  ARM: dts: omap3-igep0020: Add pinmuxing for DVI output
  ARM: dts: omap3-igep0020: Add pinmux setup for i2c devices
  ARM: dts: omap3-igep: Update to use the TI AM/DM37x processor
  ARM: dts: omap3-igep: Add support for LBEE1USJYC WiFi connected to SDIO
  ARM: dts: omap3-igep: Fix bus-width for mmc1
  ARM: OMAP2+: dss-common: change IGEP's DVI DDC i2c bus
  ARM: OMAP2+: Disable POSTED mode for errata i103 and i767
  ARM: OMAP2+: Fix eMMC on n900 with device tree
  ARM: OMAP2+: Add fixed regulator to omap2plus_defconfig
  ARM: OMAP2+: Fix more missing data for omap3.dtsi file

Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-03 12:39:08 -08:00
Florian Vaussard
ac46bf3933 ARM: dts: Fix the name of supplies for smsc911x shared by OMAP
drivers/net/ethernet/smsc/smsc911x.c is expecting supplies named
"vdd33a" and "vddvario". Currently the shared DTS file provides
"vmmc" and "vmmc_aux", and the supply lookup will fail:

smsc911x 2c000000.ethernet: Looking up vdd33a-supply from device tree
smsc911x 2c000000.ethernet: Looking up vdd33a-supply property in node /ocp/gpmc@6e000000/ethernet@gpmc failed
smsc911x 2c000000.ethernet: Looking up vddvario-supply from device tree
smsc911x 2c000000.ethernet: Looking up vddvario-supply property in node /ocp/gpmc@6e000000/ethernet@gpmc failed

Fix it!

Looks like commmit 6b2978ac40 (ARM: dts: Shared file for omap GPMC
connected smsc911x) made the problem more visible by moving the smc911x
configuration from the omap3-igep0020.dts file to the generic file.
But it seems we've had this problem since commit d72b441501
(ARM: dts: omap3-igep0020: Add SMSC911x LAN chip support).

Tested on OMAP3 Overo platform.

Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch>
[tony@atomide.com: updated comments for the commits causing the problem]
Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-12-02 11:38:15 -08:00
Rajendra Nayak
1cfc4bdd51 ARM: OMAP2+: Powerdomain: Fix unchecked dereference of arch_pwrdm
Commit 'cd8abed' "ARM: OMAP2+: Powerdomain: Remove the need to
always have a voltdm associated to a pwrdm" leads to the following
Smatch complaint:

arch/arm/mach-omap2/powerdomain.c:131 _pwrdm_register()
	 error: we previously assumed 'arch_pwrdm' could be null (see line 105)

So, fix the unchecked dereference of arch_pwrdm.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Rajendra Nayak <rnayak@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-12-02 11:38:14 -08:00
Jarkko Nikula
33e9c392ad ARM: dts: omap3-beagle: Add omap-twl4030 audio support
This adds typical McBSP2-TWL4030 audio description to the legacy
Beagle Board.

Signed-off-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-12-02 11:38:14 -08:00
Balaji T K
2562f52813 ARM: dts: omap4-sdp: Fix pin muxing for wl12xx
Mux mode for wlan/sdmmc5 should be MODE0 in pinmux_wl12xx_pins and
Enable Pull up on sdmmc5_clk to detect SDIO card.

This fixes WLAN on omap4-sdp that got broken in v3.10 when we
moved omap4 to boot using device tree only as I did not have
the WL12XX card in my omap4 SDP to test with. The commit that
attempted to make WL12XX working on omap4 SDP was 775d2418f3
(ARM: dts: Fix muxing and regulator for wl12xx on the SDIO
bus for blaze).

Signed-off-by: Balaji T K <balajitk@ti.com>
[tony@atomide.com: updated comments for the regression]
Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-12-02 11:38:14 -08:00
Balaji T K
2ba2866f78 ARM: dts: omap4-panda-common: Fix pin muxing for wl12xx
pin mux wl12xx_gpio and wl12xx_pins should be part of omap4_pmx_core
and not omap4_pmx_wkup. So, move wl12xx_* to omap4_pmx_core.

Fix the following error message:
pinctrl-single 4a31e040.pinmux: mux offset out of range: 0x38 (0x38)
pinctrl-single 4a31e040.pinmux: could not add functions for pinmux_wl12xx_pins 56x

SDIO card is not detected after moving pin mux to omap4_pmx_core since
sdmmc5_clk pull is disabled. Enable Pull up on sdmmc5_clk to detect SDIO card.

This fixes a regression where WLAN did not work after a warm reset
or after one up/down cycle that happened when we move omap4 to boot
using device tree only. For reference, the kernel bug is described at:

https://bugzilla.kernel.org/show_bug.cgi?id=63821

Cc: stable@vger.kernel.org # v3.10+
Signed-off-by: Balaji T K <balajitk@ti.com>
[tony@atomide.com: update comments to describe the regression]
Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-12-02 11:38:13 -08:00
Boris BREZILLON
b46e837d8e ARM: at91/dt: remove old clk material
This patch removes the old main clk node which is now useless as sama5d3
SoCs and boards are no longer compatible with the old at91 clk
implementations.

It also remove old clock definitions (clock definitions using at91 old clk
framework).

Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-12-02 15:31:29 +01:00
Boris BREZILLON
8ab033112a ARM: at91: move sama5d3 SoC to common clk
This patch removes the selection of AT91_USE_OLD_CLK when selecting sama5d3
SoC support. This will enable automatically enable COMMON_CLK_AT91 option
and add support for at91 common clk implementation.

Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-12-02 15:31:29 +01:00
Boris BREZILLON
72163e5ab5 ARM: at91/dt: define sama5d3xek's main clk frequency
Define the main clock frequency for the new main clock node
in sama5d3xcm.dtsi.

Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-12-02 15:31:29 +01:00
Boris BREZILLON
d2e8190b79 ARM: at91/dt: define sama5d3 clocks
Define sama5d3 clocks in sama5d3 device tree.
Add references to the appropriate clocks in each peripheral.

Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-12-02 15:31:28 +01:00
Boris BREZILLON
d1ff230022 ARM: at91: prepare common clk transition for sama5d3 SoC
This patch encloses sama5d3 old clk registration in
"#if defined(CONFIG_OLD_CLK_AT91) #endif" sections.

Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-12-02 15:31:28 +01:00
Boris BREZILLON
d4d24c1b4f ARM: at91: prepare sama5 dt boards transition to common clk
This patch prepare the transition to common clk for sama5 dt boards by
replacing the timer init callback.

Clocks registration cannot be done in early init callback (as formerly done
by the old clk implementation) because it requires dynamic allocation
which is not ready yet during early init.

In the other hand, at91 clocks must be registered before
at91sam926x_pit_init is called because PIT (Periodic Interval Timer) driver
request the master clk (mck).

A new function (at91sama5_dt_timer_init) is created to fullfil these needs.
This function registers all at91 clks using the dt definition before
calling the PIT init function.
The device tree clock registration is enabled only if common clk is
selected. Else the old clk registration is been done during
at91_dt_initialize call.

Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-12-02 15:31:27 +01:00
Boris BREZILLON
c59b631517 ARM: at91: add new compatible strings for pmc driver
This patch adds new compatible string for PMC node to prepare the
transition to common clk.

These compatible string come from pmc driver in clk subsystem and are
needed to provide new device tree compatibility with old at91 clks
(device tree using common clks will use the new compatible strings).

Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com>
Acked-by: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-12-02 15:31:27 +01:00
Boris BREZILLON
7034be876e ARM: at91: move pit timer to common clk framework
Use device tree to get the source clock of the PIT (Periodic Interval Timer).
If the clock is not found in device tree (or dt is not enabled) we'll try to
get it using clk_lookup definitions.

Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com>
Acked-by: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-12-02 15:31:26 +01:00
Boris BREZILLON
a9c0688fde clk: at91: add PMC smd clock
This patch adds at91 smd (Soft Modem) clock implementation using common clk
framework.

Not used by any driver right now.

Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com>
Acked-by: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-12-02 15:31:25 +01:00
Boris BREZILLON
c84a61d872 clk: at91: add PMC usb clock
This patch adds new at91 usb clock implementation using common clk framework.
This clock is used to clock usb ports (ohci, ehci and udc).

Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com>
Acked-by: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-12-02 15:31:25 +01:00
Boris BREZILLON
f090fb37de clk: at91: add PMC utmi clock
This adds new at91 utmi clock implementation using common clk framework.

This clock is a pll with a fixed factor (x40).
It is used as a source for usb clock.

Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com>
Acked-by: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-12-02 15:31:25 +01:00
Boris BREZILLON
c8a8c63008 ARM: at91: add Kconfig options for common clk support
This patch adds the following Kconfig options to prepare the transition to
common clk framework:

- AT91_USE_OLD_CLK: this option is selected by every SoC which does not
  support new at91 clks based on common clk framework (SoC which does not
  define the clock tree in its device tree).
  This options is also selected when the user choose non dt boards support
  (new at91 clks can only be registered from a device tree definition).

- COMMON_CLK_AT91: this option cannot be selected directly. Instead it is
  enabled if these 3 conditions are met:
   * at least one of the selected SoCs have a PMC (Power Management
     Controller) Unit
   * device tree support is enabled
   * the old at91 clk implementation is disabled (every selected SoC define
     its clks in its device tree and non dt boards support is disabled)

- OLD_CLK_AT91: this option cannot be selected directly. Instead it is
  enabled if these 2 conditions are met:
   * at least one of the selected SoCs have a PMC (Power Management
     Controller) Unit
   * at least one of the selected SoCs does not define its clks in its
     device tree or non dt-boards support is enabled

This patch selects AT91_USE_OLD_CLK in all currently supported SoCs. These
selects will be removed after clk definitions are properly added in each
soc's device tree.
It also selects AT91_USE_OLD_CLK in all non-dt boards support.

AT91_PMC_UNIT references are replaced by OLD_CLK_AT91, because PMC Unit is
enabled for both old and common clk implementations, and old clk
implementation should not be compiled if COMMON_CLK is enabled.

To avoid future link errors, a new stub is created for at91_dt_clock_init
function if OLD_CLK_AT91 is disabled.

A new check is added in dt init functions (setup.c) to prepare for SoCs
supporting new clk implementation. These SoCs won't setup the
register_clocks callback (clk registration is done using of_clk_init).

Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com>
Acked-by: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-12-02 15:22:52 +01:00
Boris BREZILLON
2edb90ae42 ARM: at91: move at91_pmc.h to include/linux/clk/at91_pmc.h
This patch moves at91_pmc.h header from machine specific directory
(arch/arm/mach-at91/include/mach/at91_pmc.h) to clk include directory
(include/linux/clk/at91_pmc.h).
We need this to avoid reference to machine specific headers in clk
drivers.

Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com>
Acked-by: Felipe Balbi <balbi@ti.com>
Acked-by: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-12-02 15:22:15 +01:00
Brent Taylor
7093bf2b71 ARM: at91: fixed unresolved symbol "at91_pm_set_standby" when built without CONFIG_PM
If CONFIG_PM is not defined, then arch/arm/mach-at91/pm.c is not
compiled in.  This patch creates an inline function that does nothing
if CONFIG_PM is not defined.

Signed-off-by: Brent Taylor <motobud@gmail.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-12-02 14:24:40 +01:00
Nicolas Ferre
d2607c3b78 ARM: at91: add usart3 alias to dtsi
Alias was missing for SoC of the at91sam9x5 familly that embed USART3.

Reported-by: Jiri Prchal <jiri.prchal@aksignal.cz>
[b.brezillon@overkiz.com: advised to place changes in at91sam9x5_usart3.dtsi]
Acked-by: Boris BREZILLON <b.brezillon@overkiz.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-12-02 14:14:53 +01:00
Ludovic Desroches
58e7b1d582 ARM: at91: sama5d3: reduce TWI internal clock frequency
With some devices, transfer hangs during I2C frame transmission. This issue
disappears when reducing the internal frequency of the TWI IP. Even if it is
indicated that internal clock max frequency is 66MHz, it seems we have
oversampling on I2C signals making TWI believe that a transfer in progress
is done.

This fix has no impact on the I2C bus frequency.

Cc: <stable@vger.kernel.org> #3.10+
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Acked-by: Wolfram Sang <wsa@the-dreams.de>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-12-02 14:14:42 +01:00
Linus Torvalds
d5ff835f88 Fixes:
- Remove preempt_count modifications in the arm64 IRQ handling code
   since that's already dealt with in generic irq_enter/irq_exit
 - PTE_PROT_NONE bit moved higher up to avoid overlapping with the
   hardware bits (for PROT_NONE mappings which are pte_present)
 - Big-endian fixes for ptrace support
 - Asynchronous aborts unmasking while in the kernel
 - pgprot_writecombine() change to create Normal NonCacheable memory
   rather than Device GRE
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.9 (GNU/Linux)
 
 iQIcBAABAgAGBQJSmM3cAAoJEGvWsS0AyF7xNGAP/RjRS8gnNPRpM9EB/ZsLM9M3
 iNQVaPHJcXaeWXJHVjaHdFi1CQ9n/07EtHyRGjzwXqwm+e/2qjvZ3XqAKJbARu7G
 vdHnq0Ng7Gde3DQ4ZomH/YvUCdO+r7/ZWCXhGDDKPyEu9q/3sTLp9z7x+Vp8LjdX
 610v3zNY4pLvhEB4DXXjP4hUmjxUyhlOBW/kieL0CZ3BQBzB1xWd1iztRCaXpVzc
 czf+JuNHLAyTlVUg2T4JxZYAimO4wc1OnyFHkabWLecEcAmj6CzuVQNi+U+G9ooE
 HeTCn61Szc+M5Zta53yHqh86f5KFDlAy/YdCEovs/1dPuCTGzB29CD96LNZme00/
 y8FXj7NQXyOqDqH31CxiFrH+Us/1HOw/cM3qOgogHSOwvuitI8g6dVdszrngfdcy
 pSviJ4xa9mDwqnfKYWlpA2fx4TKzX0rZLniy7Jk4K1SY71W9eax0uCKj0BcyBscg
 Jn+npLVIdcwAi53BpzgwvZnAnvFqDoTQ3bGEyM3ReSkbC2LFgBwjXlSJgDaazuOa
 vfNaZxHgul5QL0oUVoD+dPzBTEwK4omU29Mt16DJP2eiFZ829qqTwij2auPEOkjq
 jX6G6z0f0tGRQhKWPpLq+VLcW7mu2SBvsUYe4TCValyOv/+tH4r7m65XZ9Yec70n
 LvFEHHqe506c95M3FUny
 =nfKM
 -----END PGP SIGNATURE-----

Merge tag 'arm64-stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64

Pull ARM64 fixes from Catalin Marinas:
 - Remove preempt_count modifications in the arm64 IRQ handling code
   since that's already dealt with in generic irq_enter/irq_exit
 - PTE_PROT_NONE bit moved higher up to avoid overlapping with the
   hardware bits (for PROT_NONE mappings which are pte_present)
 - Big-endian fixes for ptrace support
 - Asynchronous aborts unmasking while in the kernel
 - pgprot_writecombine() change to create Normal NonCacheable memory
   rather than Device GRE

* tag 'arm64-stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64:
  arm64: Move PTE_PROT_NONE higher up
  arm64: Use Normal NonCacheable memory for writecombine
  arm64: debug: make aarch32 bkpt checking endian clean
  arm64: ptrace: fix compat registes get/set to be endian clean
  arm64: Unmask asynchronous aborts when in kernel mode
  arm64: dts: Reserve the memory used for secondary CPU release address
  arm64: let the core code deal with preempt_count
2013-11-29 09:57:13 -08:00
Linus Torvalds
033dbbdec3 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Martin Schwidefsky:
 "One performance improvement and a few bug fixes.  Two of the fixes
  deal with the clock related problems we have seen on recent kernels"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/mm: handle asce-type exceptions as normal page fault
  s390,time: revert direct ktime path for s390 clockevent device
  s390/time,vdso: convert to the new update_vsyscall interface
  s390/uaccess: add missing page table walk range check
  s390/mm: optimize copy_page
  s390/dasd: validate request size before building CCW/TCW request
  s390/signal: always restore saved runtime instrumentation psw bit
2013-11-29 09:56:15 -08:00
Catalin Marinas
3676f9ef54 arm64: Move PTE_PROT_NONE higher up
PTE_PROT_NONE means that a pte is present but does not have any
read/write attributes. However, setting the memory type like
pgprot_writecombine() is allowed and such bits overlap with
PTE_PROT_NONE. This causes mmap/munmap issues in drivers that change the
vma->vm_pg_prot on PROT_NONE mappings.

This patch reverts the PTE_FILE/PTE_PROT_NONE shift in commit
59911ca432 (ARM64: mm: Move PTE_PROT_NONE bit) and moves PTE_PROT_NONE
together with the other software bits.

Signed-off-by: Steve Capper <steve.capper@linaro.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Steve Capper <steve.capper@linaro.org>
Cc: <stable@vger.kernel.org> # 3.11+
2013-11-29 15:22:59 +00:00
Catalin Marinas
4f00130b70 arm64: Use Normal NonCacheable memory for writecombine
This provides better performance compared to Device GRE and also allows
unaligned accesses. Such memory is intended to be used with standard RAM
(e.g. framebuffers) and not I/O.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2013-11-29 15:05:07 +00:00
Matthew Leach
2dacab73dc arm64: debug: make aarch32 bkpt checking endian clean
The current breakpoint instruction checking code for A32 is not endian
clean. Fix this with appropriate byte-swapping when retrieving
instructions.

Signed-off-by: Matthew Leach <matthew.leach@arm.com>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2013-11-28 18:01:29 +00:00
Matthew Leach
6a2e5e521c arm64: ptrace: fix compat registes get/set to be endian clean
On a BE system the wrong half of the X registers is retrieved/written
when attempting to get/set the value of aarch32 registers through
ptrace.

Ensure that types are the correct width so that the relevant
casting occurs.

Signed-off-by: Matthew Leach <matthew.leach@arm.com>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2013-11-28 18:01:28 +00:00
Linus Torvalds
a456c0d9c0 Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
Pull powerpc fixes from Ben Herrenschmidt:
 "The main thing that caused problem was that CONFIG_CPU_LITTLE_ENDIAN
  got turned on with allyesconfig and such, which is not a very good
  idea especially since it requires a newer toolchain than what most
  people have.

  So we turned it into a choice instead that defaults to big endian"

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
  powerpc/windfarm: Fix XServe G5 fan control Makefile issue
  arch/powerpc/kernel: Use %12.12s instead of %12s to avoid memory overflow
  powerpc/signals: Improved mark VSX not saved with small contexts fix
  powerpc/kdump: Adding symbols in vmcoreinfo to facilitate dump filtering
  powerpc: allyesconfig should not select CONFIG_CPU_LITTLE_ENDIAN
  powerpc: Fix error when cross building TAGS & cscope
  powerpc/booke: Only check for hugetlb in flush if vma != NULL
  powerpc/85xx: typo in dts: "interupt" (four devices)
  powerpc/8xx: mfspr SPRN_TBRx in lieu of mftb/mftbu is not supported
  powerpc/corenet64: compile with CONFIG_E{5,6}500_CPU well
2013-11-27 20:32:38 -08:00
Roger Quadros
30023a7e4f ARM: dts: omap3-beagle: Fix USB host on beagle boards (for 3.13)
Beagle (rev. C4) and Beagle-XM (all revs) need VAUX2 1.8V supply
for the USB PHY.

As the generic PHY driver can't handle more than one supply
at the moment, we configure this supply to be always on.
This will cause a very small power impact if the USB host subsystem
is not in use, about 76.86 micro-W + LDO power.

Older Beagle boards (prior to C4) don't have VAUX2 connected anywhere,
so there won't be any functional impact on those boards other than
some additional LDO power consumption.

Reported-by: Nishanth Menon <nm@ti.com>
Tested-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-11-26 15:03:39 -08:00
Javier Martinez Canillas
2f2befd820 ARM: dts: omap3-igep0020: name twl4030 VPLL2 regulator as vdds_dsi
On Device Tree boot the VDDS_DSI regulator is not linked to
the DPI device so omapfb driver probing fails with:

[    3.186035] OMAPFB: omapfb_probe
[    3.190704] omapdss DPI error: can't get VDDS_DSI regulator
[    3.196594] omapfb omapfb: failed to connect default display
[    3.202667] omapfb omapfb: failed to init overlay connections
[    3.208892] OMAPFB: free_resources
[    3.212493] OMAPFB: free all fbmem
[    3.216735] omapfb omapfb: failed to setup omapfb

As a workaround name the VPLL2 regulator from twl4030 as vdds_dsi
so getting the VDDS_DSI regulator will succeed on dpi_init_regulator().

Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-11-26 15:03:39 -08:00
Enric Balletbo i Serra
caa73370ea ARM: dts: AM33XX IGEP0033: add USB support
Add node to support the USB Host and the USB OTG on the IGEP AQUILA
Processor Board.

Signed-off-by: Enric Balletbo i Serra <eballetbo@iseebcn.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-11-26 15:03:39 -08:00
Enric Balletbo i Serra
d8e5b2bdd3 ARM: dts: AM33XX BASE0033: add 32KBit EEPROM support
The IGEP AQUILA EXPANSION has a 32KBit EEPROM for user data storage.

Signed-off-by: Enric Balletbo i Serra <eballetbo@iseebcn.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-11-26 15:03:38 -08:00