2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-22 20:23:57 +08:00
Commit Graph

271 Commits

Author SHA1 Message Date
Mel Gorman
2457aec637 mm: non-atomically mark page accessed during page cache allocation where possible
aops->write_begin may allocate a new page and make it visible only to have
mark_page_accessed called almost immediately after.  Once the page is
visible the atomic operations are necessary which is noticable overhead
when writing to an in-memory filesystem like tmpfs but should also be
noticable with fast storage.  The objective of the patch is to initialse
the accessed information with non-atomic operations before the page is
visible.

The bulk of filesystems directly or indirectly use
grab_cache_page_write_begin or find_or_create_page for the initial
allocation of a page cache page.  This patch adds an init_page_accessed()
helper which behaves like the first call to mark_page_accessed() but may
called before the page is visible and can be done non-atomically.

The primary APIs of concern in this care are the following and are used
by most filesystems.

	find_get_page
	find_lock_page
	find_or_create_page
	grab_cache_page_nowait
	grab_cache_page_write_begin

All of them are very similar in detail to the patch creates a core helper
pagecache_get_page() which takes a flags parameter that affects its
behavior such as whether the page should be marked accessed or not.  Then
old API is preserved but is basically a thin wrapper around this core
function.

Each of the filesystems are then updated to avoid calling
mark_page_accessed when it is known that the VM interfaces have already
done the job.  There is a slight snag in that the timing of the
mark_page_accessed() has now changed so in rare cases it's possible a page
gets to the end of the LRU as PageReferenced where as previously it might
have been repromoted.  This is expected to be rare but it's worth the
filesystem people thinking about it in case they see a problem with the
timing change.  It is also the case that some filesystems may be marking
pages accessed that previously did not but it makes sense that filesystems
have consistent behaviour in this regard.

The test case used to evaulate this is a simple dd of a large file done
multiple times with the file deleted on each iterations.  The size of the
file is 1/10th physical memory to avoid dirty page balancing.  In the
async case it will be possible that the workload completes without even
hitting the disk and will have variable results but highlight the impact
of mark_page_accessed for async IO.  The sync results are expected to be
more stable.  The exception is tmpfs where the normal case is for the "IO"
to not hit the disk.

The test machine was single socket and UMA to avoid any scheduling or NUMA
artifacts.  Throughput and wall times are presented for sync IO, only wall
times are shown for async as the granularity reported by dd and the
variability is unsuitable for comparison.  As async results were variable
do to writback timings, I'm only reporting the maximum figures.  The sync
results were stable enough to make the mean and stddev uninteresting.

The performance results are reported based on a run with no profiling.
Profile data is based on a separate run with oprofile running.

async dd
                                    3.15.0-rc3            3.15.0-rc3
                                       vanilla           accessed-v2
ext3    Max      elapsed     13.9900 (  0.00%)     11.5900 ( 17.16%)
tmpfs	Max      elapsed      0.5100 (  0.00%)      0.4900 (  3.92%)
btrfs   Max      elapsed     12.8100 (  0.00%)     12.7800 (  0.23%)
ext4	Max      elapsed     18.6000 (  0.00%)     13.3400 ( 28.28%)
xfs	Max      elapsed     12.5600 (  0.00%)      2.0900 ( 83.36%)

The XFS figure is a bit strange as it managed to avoid a worst case by
sheer luck but the average figures looked reasonable.

        samples percentage
ext3       86107    0.9783  vmlinux-3.15.0-rc4-vanilla        mark_page_accessed
ext3       23833    0.2710  vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed
ext3        5036    0.0573  vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed
ext4       64566    0.8961  vmlinux-3.15.0-rc4-vanilla        mark_page_accessed
ext4        5322    0.0713  vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed
ext4        2869    0.0384  vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed
xfs        62126    1.7675  vmlinux-3.15.0-rc4-vanilla        mark_page_accessed
xfs         1904    0.0554  vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed
xfs          103    0.0030  vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed
btrfs      10655    0.1338  vmlinux-3.15.0-rc4-vanilla        mark_page_accessed
btrfs       2020    0.0273  vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed
btrfs        587    0.0079  vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed
tmpfs      59562    3.2628  vmlinux-3.15.0-rc4-vanilla        mark_page_accessed
tmpfs       1210    0.0696  vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed
tmpfs         94    0.0054  vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed

[akpm@linux-foundation.org: don't run init_page_accessed() against an uninitialised pointer]
Signed-off-by: Mel Gorman <mgorman@suse.de>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Jan Kara <jack@suse.cz>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Hugh Dickins <hughd@google.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Tested-by: Prabhakar Lad <prabhakar.csengg@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 16:54:10 -07:00
Mel Gorman
e7470ee89f fs: buffer: do not use unnecessary atomic operations when discarding buffers
Discarding buffers uses a bunch of atomic operations when discarding
buffers because ......  I can't think of a reason.  Use a cmpxchg loop to
clear all the necessary flags.  In most (all?) cases this will be a single
atomic operations.

[akpm@linux-foundation.org: move BUFFER_FLAGS_DISCARD into the .c file]
Signed-off-by: Mel Gorman <mgorman@suse.de>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Jan Kara <jack@suse.cz>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Hugh Dickins <hughd@google.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 16:54:10 -07:00
Matthew Wilcox
1b938c0827 fs/buffer.c: remove block_write_full_page_endio()
The last in-tree caller of block_write_full_page_endio() was removed in
January 2013.  It's time to remove the EXPORT_SYMBOL, which leaves
block_write_full_page() as the only caller of
block_write_full_page_endio(), so inline block_write_full_page_endio()
into block_write_full_page().

Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Dheeraj Reddy <dheeraj.reddy@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 16:54:02 -07:00
Peter Zijlstra
4e857c58ef arch: Mass conversion of smp_mb__*()
Mostly scripted conversion of the smp_mb__* barriers.

Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/n/tip-55dhyhocezdw1dg7u19hmh1u@git.kernel.org
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-arch@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-18 14:20:48 +02:00
Linus Torvalds
5166701b36 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs updates from Al Viro:
 "The first vfs pile, with deep apologies for being very late in this
  window.

  Assorted cleanups and fixes, plus a large preparatory part of iov_iter
  work.  There's a lot more of that, but it'll probably go into the next
  merge window - it *does* shape up nicely, removes a lot of
  boilerplate, gets rid of locking inconsistencie between aio_write and
  splice_write and I hope to get Kent's direct-io rewrite merged into
  the same queue, but some of the stuff after this point is having
  (mostly trivial) conflicts with the things already merged into
  mainline and with some I want more testing.

  This one passes LTP and xfstests without regressions, in addition to
  usual beating.  BTW, readahead02 in ltp syscalls testsuite has started
  giving failures since "mm/readahead.c: fix readahead failure for
  memoryless NUMA nodes and limit readahead pages" - might be a false
  positive, might be a real regression..."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (63 commits)
  missing bits of "splice: fix racy pipe->buffers uses"
  cifs: fix the race in cifs_writev()
  ceph_sync_{,direct_}write: fix an oops on ceph_osdc_new_request() failure
  kill generic_file_buffered_write()
  ocfs2_file_aio_write(): switch to generic_perform_write()
  ceph_aio_write(): switch to generic_perform_write()
  xfs_file_buffered_aio_write(): switch to generic_perform_write()
  export generic_perform_write(), start getting rid of generic_file_buffer_write()
  generic_file_direct_write(): get rid of ppos argument
  btrfs_file_aio_write(): get rid of ppos
  kill the 5th argument of generic_file_buffered_write()
  kill the 4th argument of __generic_file_aio_write()
  lustre: don't open-code kernel_recvmsg()
  ocfs2: don't open-code kernel_recvmsg()
  drbd: don't open-code kernel_recvmsg()
  constify blk_rq_map_user_iov() and friends
  lustre: switch to kernel_sendmsg()
  ocfs2: don't open-code kernel_sendmsg()
  take iov_iter stuff to mm/iov_iter.c
  process_vm_access: tidy up a bit
  ...
2014-04-12 14:49:50 -07:00
Al Viro
c186afb4db switch ->is_partially_uptodate() to saner arguments
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-04-01 23:19:19 -04:00
Jiri Kosina
d4263348f7 Merge branch 'master' into for-next 2014-02-20 14:54:28 +01:00
Masanari Iida
e227867f12 treewide: Fix typo in Documentation/DocBook
This patch fix spelling typo in Documentation/DocBook.
It is because .html and .xml files are generated by make htmldocs,
I have to fix a typo within the source files.

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-02-19 14:58:17 +01:00
KOSAKI Motohiro
227d53b397 mm: __set_page_dirty uses spin_lock_irqsave instead of spin_lock_irq
To use spin_{un}lock_irq is dangerous if caller disabled interrupt.
During aio buffer migration, we have a possibility to see the following
call stack.

aio_migratepage  [disable interrupt]
  migrate_page_copy
    clear_page_dirty_for_io
      set_page_dirty
        __set_page_dirty_buffers
          __set_page_dirty
            spin_lock_irq

This mean, current aio migration is a deadlockable.  spin_lock_irqsave
is a safer alternative and we should use it.

Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Reported-by: David Rientjes rientjes@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-02-06 13:48:51 -08:00
Christoph Lameter
ca6673b02e block: Replace __this_cpu_ptr with raw_cpu_ptr
__this_cpu_ptr is being phased out.

Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-12-03 19:19:41 -07:00
Kent Overstreet
4f024f3797 block: Abstract out bvec iterator
Immutable biovecs are going to require an explicit iterator. To
implement immutable bvecs, a later patch is going to add a bi_bvec_done
member to this struct; for now, this patch effectively just renames
things.

Signed-off-by: Kent Overstreet <kmo@daterainc.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: "Ed L. Cashin" <ecashin@coraid.com>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Lars Ellenberg <drbd-dev@lists.linbit.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Matthew Wilcox <willy@linux.intel.com>
Cc: Geoff Levand <geoff@infradead.org>
Cc: Yehuda Sadeh <yehuda@inktank.com>
Cc: Sage Weil <sage@inktank.com>
Cc: Alex Elder <elder@inktank.com>
Cc: ceph-devel@vger.kernel.org
Cc: Joshua Morris <josh.h.morris@us.ibm.com>
Cc: Philip Kelleher <pjk1939@linux.vnet.ibm.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Neil Brown <neilb@suse.de>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Mike Snitzer <snitzer@redhat.com>
Cc: dm-devel@redhat.com
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: linux390@de.ibm.com
Cc: Boaz Harrosh <bharrosh@panasas.com>
Cc: Benny Halevy <bhalevy@tonian.com>
Cc: "James E.J. Bottomley" <JBottomley@parallels.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Nicholas A. Bellinger" <nab@linux-iscsi.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Chris Mason <chris.mason@fusionio.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Dave Kleikamp <shaggy@kernel.org>
Cc: Joern Engel <joern@logfs.org>
Cc: Prasad Joshi <prasadjoshi.linux@gmail.com>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: KONISHI Ryusuke <konishi.ryusuke@lab.ntt.co.jp>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Ben Myers <bpm@sgi.com>
Cc: xfs@oss.sgi.com
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com>
Cc: Ben Hutchings <ben@decadent.org.uk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Guo Chao <yan@linux.vnet.ibm.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Asai Thambi S P <asamymuthupa@micron.com>
Cc: Selvan Mani <smani@micron.com>
Cc: Sam Bradshaw <sbradshaw@micron.com>
Cc: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Cc: "Roger Pau Monné" <roger.pau@citrix.com>
Cc: Jan Beulich <jbeulich@suse.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Ian Campbell <Ian.Campbell@citrix.com>
Cc: Sebastian Ott <sebott@linux.vnet.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Jiang Liu <jiang.liu@huawei.com>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Jerome Marchand <jmarchand@redhat.com>
Cc: Joe Perches <joe@perches.com>
Cc: Peng Tao <tao.peng@emc.com>
Cc: Andy Adamson <andros@netapp.com>
Cc: fanchaoting <fanchaoting@cn.fujitsu.com>
Cc: Jie Liu <jeff.liu@oracle.com>
Cc: Sunil Mushran <sunil.mushran@gmail.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Namjae Jeon <namjae.jeon@samsung.com>
Cc: Pankaj Kumar <pankaj.km@samsung.com>
Cc: Dan Magenheimer <dan.magenheimer@oracle.com>
Cc: Mel Gorman <mgorman@suse.de>6
2013-11-23 22:33:47 -08:00
Johannes Weiner
84235de394 fs: buffer: move allocation failure loop into the allocator
Buffer allocation has a very crude indefinite loop around waking the
flusher threads and performing global NOFS direct reclaim because it can
not handle allocation failures.

The most immediate problem with this is that the allocation may fail due
to a memory cgroup limit, where flushers + direct reclaim might not make
any progress towards resolving the situation at all.  Because unlike the
global case, a memory cgroup may not have any cache at all, only
anonymous pages but no swap.  This situation will lead to a reclaim
livelock with insane IO from waking the flushers and thrashing unrelated
filesystem cache in a tight loop.

Use __GFP_NOFAIL allocations for buffers for now.  This makes sure that
any looping happens in the page allocator, which knows how to
orchestrate kswapd, direct reclaim, and the flushers sensibly.  It also
allows memory cgroups to detect allocations that can't handle failure
and will allow them to ultimately bypass the limit if reclaim can not
make progress.

Reported-by: azurIt <azurit@pobox.sk>
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-10-16 21:35:53 -07:00
Mel Gorman
b45972265f mm: vmscan: take page buffers dirty and locked state into account
Page reclaim keeps track of dirty and under writeback pages and uses it
to determine if wait_iff_congested() should stall or if kswapd should
begin writing back pages.  This fails to account for buffer pages that
can be under writeback but not PageWriteback which is the case for
filesystems like ext3 ordered mode.  Furthermore, PageDirty buffer pages
can have all the buffers clean and writepage does no IO so it should not
be accounted as congested.

This patch adds an address_space operation that filesystems may
optionally use to check if a page is really dirty or really under
writeback.  An implementation is provided for for buffer_heads is added
and used for block operations and ext3 in ordered mode.  By default the
page flags are obeyed.

Credit goes to Jan Kara for identifying that the page flags alone are
not sufficient for ext3 and sanity checking a number of ideas on how the
problem could be addressed.

Signed-off-by: Mel Gorman <mgorman@suse.de>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Rik van Riel <riel@redhat.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
Cc: Zlatko Calusic <zcalusic@bitsync.net>
Cc: dormando <dormando@rydia.net>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 16:07:29 -07:00
Lukas Czerner
d47992f86b mm: change invalidatepage prototype to accept length
Currently there is no way to truncate partial page where the end
truncate point is not at the end of the page. This is because it was not
needed and the functionality was enough for file system truncate
operation to work properly. However more file systems now support punch
hole feature and it can benefit from mm supporting truncating page just
up to the certain point.

Specifically, with this functionality truncate_inode_pages_range() can
be changed so it supports truncating partial page at the end of the
range (currently it will BUG_ON() if 'end' is not at the end of the
page).

This commit changes the invalidatepage() address space operation
prototype to accept range to be invalidated and update all the instances
for it.

We also change the block_invalidatepage() in the same way and actually
make a use of the new length argument implementing range invalidation.

Actual file system implementations will follow except the file systems
where the changes are really simple and should not change the behaviour
in any way .Implementation for truncate_page_range() which will be able
to accept page unaligned ranges will follow as well.

Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Hugh Dickins <hughd@google.com>
2013-05-21 23:17:23 -04:00
Linus Torvalds
4de13d7aa8 Merge branch 'for-3.10/core' of git://git.kernel.dk/linux-block
Pull block core updates from Jens Axboe:

 - Major bit is Kents prep work for immutable bio vecs.

 - Stable candidate fix for a scheduling-while-atomic in the queue
   bypass operation.

 - Fix for the hang on exceeded rq->datalen 32-bit unsigned when merging
   discard bios.

 - Tejuns changes to convert the writeback thread pool to the generic
   workqueue mechanism.

 - Runtime PM framework, SCSI patches exists on top of these in James'
   tree.

 - A few random fixes.

* 'for-3.10/core' of git://git.kernel.dk/linux-block: (40 commits)
  relay: move remove_buf_file inside relay_close_buf
  partitions/efi.c: replace useless kzalloc's by kmalloc's
  fs/block_dev.c: fix iov_shorten() criteria in blkdev_aio_read()
  block: fix max discard sectors limit
  blkcg: fix "scheduling while atomic" in blk_queue_bypass_start
  Documentation: cfq-iosched: update documentation help for cfq tunables
  writeback: expose the bdi_wq workqueue
  writeback: replace custom worker pool implementation with unbound workqueue
  writeback: remove unused bdi_pending_list
  aoe: Fix unitialized var usage
  bio-integrity: Add explicit field for owner of bip_buf
  block: Add an explicit bio flag for bios that own their bvec
  block: Add bio_alloc_pages()
  block: Convert some code to bio_for_each_segment_all()
  block: Add bio_for_each_segment_all()
  bounce: Refactor __blk_queue_bounce to not use bi_io_vec
  raid1: use bio_copy_data()
  pktcdvd: Use bio_reset() in disabled code to kill bi_idx usage
  pktcdvd: use bio_copy_data()
  block: Add bio_copy_data()
  ...
2013-05-08 10:13:35 -07:00
Linus Torvalds
149b306089 Mostly performance and bug fixes, plus some cleanups. The one new
feature this merge window is a new ioctl EXT4_IOC_SWAP_BOOT which
 allows installation of a hidden inode designed for boot loaders.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABCAAGBQJRfpDwAAoJENNvdpvBGATwsjwP/17V3AN6XTEhZK80p3/qN5YD
 N2QIHeyYIqCGpczLs2TQEkxWX6nqpDggAPXY956wvgeEMQV+pQ+DLO4Ol9+p5WD2
 hrklleYhtOjFQ3Xh4lqrEi5FzKVzWagVDLqgUjALJ+D+hkDB7ZQT/fm2sH45rzot
 xBp3aVqANU8GqAAbEW4/Ng9ZGMx0dpANiU2svbjM71sv2dCLFmWAkz+GgZsMbuJZ
 vnKIZP6I6plwP3LuZzEbVCA7F2PzC4ywEOJKjIEvgHpX6uMDR3FX8pD5Dlo/o6e2
 eP+KLnD43mJMxBmTn22x5Sm0N6DUzJCEELRJWB9wCZoLdEvbEWRxT3qsPXfLWelG
 2jj4bImXF2CqYEsJww5FV2WdXXdnuM57pZym5vMZGAFyKPSCJobA4Y3XRdXkBfXf
 Gq/cFoPYv2EcBIhz3zrRj+tbY8esbO9wOnF6+x+AF10BspD2V7nuoVdWVhOf0A3v
 i9ifGPwLk3e3xHr9oXheo7IWn52oviZeyD77d7D7MLhgn+xU4LaVhW3R63Q+mI4D
 0TXG25R1CVcE7wyFy3gqSVXSCDO0JcQBL5LgcL+wAGXcHPAXqBpN2DFTPo+9fJH2
 g3YMwr+wMbci1XRVQ2vdTt/nBZYjOCh6PgRmg3KjTz11Ra5EsjQvYjKWYwqf2RGn
 QhCgbzd/qtZfNJztLvr7
 =GCT2
 -----END PGP SIGNATURE-----

Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4

Pull ext4 updates from Ted Ts'o:
 "Mostly performance and bug fixes, plus some cleanups.  The one new
  feature this merge window is a new ioctl EXT4_IOC_SWAP_BOOT which
  allows installation of a hidden inode designed for boot loaders."

* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (50 commits)
  ext4: fix type-widening bug in inode table readahead code
  ext4: add check for inodes_count overflow in new resize ioctl
  ext4: fix Kconfig documentation for CONFIG_EXT4_DEBUG
  ext4: fix online resizing for ext3-compat file systems
  jbd2: trace when lock_buffer in do_get_write_access takes a long time
  ext4: mark metadata blocks using bh flags
  buffer: add BH_Prio and BH_Meta flags
  ext4: mark all metadata I/O with REQ_META
  ext4: fix readdir error in case inline_data+^dir_index.
  ext4: fix readdir error in the case of inline_data+dir_index
  jbd2: use kmem_cache_zalloc instead of kmem_cache_alloc/memset
  ext4: mext_insert_extents should update extent block checksum
  ext4: move quota initialization out of inode allocation transaction
  ext4: reserve xattr index for Rich ACL support
  jbd2: reduce journal_head size
  ext4: clear buffer_uninit flag when submitting IO
  ext4: use io_end for multiple bios
  ext4: make ext4_bio_write_page() use BH_Async_Write flags
  ext4: Use kstrtoul() instead of parse_strtoul()
  ext4: defragmentation code cleanup
  ...
2013-05-01 08:04:12 -07:00
majianpeng
e76004093d fs/buffer.c: remove unnecessary init operation after allocating buffer_head.
bh allocation uses kmem_cache_zalloc() so we needn't call
'init_buffer(bh, NULL, NULL)' and perform other set-zero-operations.

Signed-off-by: Jianpeng Ma <majianpeng@gmail.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-29 15:54:39 -07:00
Darrick J. Wong
7136851117 mm: make snapshotting pages for stable writes a per-bio operation
Walking a bio's page mappings has proved problematic, so create a new
bio flag to indicate that a bio's data needs to be snapshotted in order
to guarantee stable pages during writeback.  Next, for the one user
(ext3/jbd) of snapshotting, hook all the places where writes can be
initiated without PG_writeback set, and set BIO_SNAP_STABLE there.

We must also flag journal "metadata" bios for stable writeout, since
file data can be written through the journal.  Finally, the
MS_SNAP_STABLE mount flag (only used by ext3) is now superfluous, so get
rid of it.

[akpm@linux-foundation.org: rename _submit_bh()'s `flags' to `bio_flags', delobotomize the _submit_bh declaration]
[akpm@linux-foundation.org: teeny cleanup]
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Artem Bityutskiy <dedekind1@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-29 15:54:33 -07:00
Theodore Ts'o
877f962c5e buffer: add BH_Prio and BH_Meta flags
Add buffer_head flags so that buffer cache writebacks can be marked
with the the appropriate request flags, so that metadata blocks can be
marked appropriately in blktrace.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-04-20 19:58:37 -04:00
Kent Overstreet
4f2ac93c17 block: Remove bi_idx references
For immutable bvecs, all bi_idx usage needs to be audited - so here
we're removing all the unnecessary uses.

Most of these are places where it was being initialized on a bio that
was just allocated, a few others are conversions to standard macros.

Signed-off-by: Kent Overstreet <koverstreet@google.com>
CC: Jens Axboe <axboe@kernel.dk>
2013-03-23 14:15:31 -07:00
Linus Torvalds
ee89f81252 Merge branch 'for-3.9/core' of git://git.kernel.dk/linux-block
Pull block IO core bits from Jens Axboe:
 "Below are the core block IO bits for 3.9.  It was delayed a few days
  since my workstation kept crashing every 2-8h after pulling it into
  current -git, but turns out it is a bug in the new pstate code (divide
  by zero, will report separately).  In any case, it contains:

   - The big cfq/blkcg update from Tejun and and Vivek.

   - Additional block and writeback tracepoints from Tejun.

   - Improvement of the should sort (based on queues) logic in the plug
     flushing.

   - _io() variants of the wait_for_completion() interface, using
     io_schedule() instead of schedule() to contribute to io wait
     properly.

   - Various little fixes.

  You'll get two trivial merge conflicts, which should be easy enough to
  fix up"

Fix up the trivial conflicts due to hlist traversal cleanups (commit
b67bfe0d42: "hlist: drop the node parameter from iterators").

* 'for-3.9/core' of git://git.kernel.dk/linux-block: (39 commits)
  block: remove redundant check to bd_openers()
  block: use i_size_write() in bd_set_size()
  cfq: fix lock imbalance with failed allocations
  drivers/block/swim3.c: fix null pointer dereference
  block: don't select PERCPU_RWSEM
  block: account iowait time when waiting for completion of IO request
  sched: add wait_for_completion_io[_timeout]
  writeback: add more tracepoints
  block: add block_{touch|dirty}_buffer tracepoint
  buffer: make touch_buffer() an exported function
  block: add @req to bio_{front|back}_merge tracepoints
  block: add missing block_bio_complete() tracepoint
  block: Remove should_sort judgement when flush blk_plug
  block,elevator: use new hashtable implementation
  cfq-iosched: add hierarchical cfq_group statistics
  cfq-iosched: collect stats from dead cfqgs
  cfq-iosched: separate out cfqg_stats_reset() from cfq_pd_reset_stats()
  blkcg: make blkcg_print_blkgs() grab q locks instead of blkcg lock
  block: RCU free request_queue
  blkcg: implement blkg_[rw]stat_recursive_sum() and blkg_[rw]stat_merge()
  ...
2013-02-28 12:52:24 -08:00
Linus Torvalds
d895cb1af1 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs pile (part one) from Al Viro:
 "Assorted stuff - cleaning namei.c up a bit, fixing ->d_name/->d_parent
  locking violations, etc.

  The most visible changes here are death of FS_REVAL_DOT (replaced with
  "has ->d_weak_revalidate()") and a new helper getting from struct file
  to inode.  Some bits of preparation to xattr method interface changes.

  Misc patches by various people sent this cycle *and* ocfs2 fixes from
  several cycles ago that should've been upstream right then.

  PS: the next vfs pile will be xattr stuff."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (46 commits)
  saner proc_get_inode() calling conventions
  proc: avoid extra pde_put() in proc_fill_super()
  fs: change return values from -EACCES to -EPERM
  fs/exec.c: make bprm_mm_init() static
  ocfs2/dlm: use GFP_ATOMIC inside a spin_lock
  ocfs2: fix possible use-after-free with AIO
  ocfs2: Fix oops in ocfs2_fast_symlink_readpage() code path
  get_empty_filp()/alloc_file() leave both ->f_pos and ->f_version zero
  target: writev() on single-element vector is pointless
  export kernel_write(), convert open-coded instances
  fs: encode_fh: return FILEID_INVALID if invalid fid_type
  kill f_vfsmnt
  vfs: kill FS_REVAL_DOT by adding a d_weak_revalidate dentry op
  nfsd: handle vfs_getattr errors in acl protocol
  switch vfs_getattr() to struct path
  default SET_PERSONALITY() in linux/elf.h
  ceph: prepopulate inodes only when request is aborted
  d_hash_and_lookup(): export, switch open-coded instances
  9p: switch v9fs_set_create_acl() to inode+fid, do it before d_instantiate()
  9p: split dropping the acls from v9fs_set_create_acl()
  ...
2013-02-26 20:16:07 -08:00
Zhang Yanfei
43be594a6b fs/buffer.c: change type of max_buffer_heads to unsigned long
max_buffer_heads is calculated from nr_free_buffer_pages(), so change
its type to unsigned long in case of overflow.

Signed-off-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-23 17:50:22 -08:00
Al Viro
496ad9aa8e new helper: file_inode(file)
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-02-22 23:31:31 -05:00
Darrick J. Wong
1d1d1a7672 mm: only enforce stable page writes if the backing device requires it
Create a helper function to check if a backing device requires stable
page writes and, if so, performs the necessary wait.  Then, make it so
that all points in the memory manager that handle making pages writable
use the helper function.  This should provide stable page write support
to most filesystems, while eliminating unnecessary waiting for devices
that don't require the feature.

Before this patchset, all filesystems would block, regardless of whether
or not it was necessary.  ext3 would wait, but still generate occasional
checksum errors.  The network filesystems were left to do their own
thing, so they'd wait too.

After this patchset, all the disk filesystems except ext3 and btrfs will
wait only if the hardware requires it.  ext3 (if necessary) snapshots
pages instead of blocking, and btrfs provides its own bdi so the mm will
never wait.  Network filesystems haven't been touched, so either they
provide their own stable page guarantees or they don't block at all.
The blocking behavior is back to what it was before 3.0 if you don't
have a disk requiring stable page writes.

Here's the result of using dbench to test latency on ext2:

3.8.0-rc3:
 Operation      Count    AvgLat    MaxLat
 ----------------------------------------
 WriteX        109347     0.028    59.817
 ReadX         347180     0.004     3.391
 Flush          15514    29.828   287.283

Throughput 57.429 MB/sec  4 clients  4 procs  max_latency=287.290 ms

3.8.0-rc3 + patches:
 WriteX        105556     0.029     4.273
 ReadX         335004     0.005     4.112
 Flush          14982    30.540   298.634

Throughput 55.4496 MB/sec  4 clients  4 procs  max_latency=298.650 ms

As you can see, the maximum write latency drops considerably with this
patch enabled.  The other filesystems (ext3/ext4/xfs/btrfs) behave
similarly, but see the cover letter for those results.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Acked-by: Steven Whitehouse <swhiteho@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Artem Bityutskiy <dedekind1@gmail.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Eric Van Hensbergen <ericvh@gmail.com>
Cc: Ron Minnich <rminnich@sandia.gov>
Cc: Latchesar Ionkov <lucho@ionkov.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21 17:22:19 -08:00
Linus Torvalds
6d283dba37 vfs: add missing virtual cache flush after editing partial pages
Andrew Morton pointed this out a month ago, and then I completely forgot
about it.

If we read a partial last page of a block device, we will zero out the
end of the page, but since that page can then be mapped into user space,
we should also make sure to flush the cache on architectures that have
virtual caches.  We have the flush_dcache_page() function for this, so
use it.

Now, in practice this really never matters, because nobody sane uses
virtual caches to begin with, and they largely exist on old broken RISC
arhitectures.

And even if you did run on one of those obsolete CPU's, the whole "mmap
and access the last partial page of a block device" behavior probably
doesn't actually exist.  The normal IO functions (read/write) will never
see the zeroed-out part of the page that migth not be coherent in the
cache, because they honor the size of the device.

So I'm marking this for stable (3.7 only), but I'm not sure anybody will
ever care.

Pointed-out-by: Andrew Morton <akpm@linux-foundation.org>
Cc: stable@vger.kernel.org  # 3.7
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-01-14 13:17:50 -08:00
Tejun Heo
5305cb8308 block: add block_{touch|dirty}_buffer tracepoint
The former is triggered from touch_buffer() and the latter
mark_buffer_dirty().

This is part of tracepoint additions to improve visiblity into
dirtying / writeback operations for io tracer and userland.

v2: Transformed writeback_dirty_buffer to block_dirty_buffer and made
    it share TP definition with block_touch_buffer.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-01-14 15:00:36 +01:00
Tejun Heo
f0059afd3e buffer: make touch_buffer() an exported function
We want to add a trace point to touch_buffer() but macros and inline
functions defined in header files can't have tracing points.  Move
touch_buffer() to fs/buffer.c and make it a proper function.

The new exported function is also declared inline.  As most uses of
touch_buffer() are inside buffer.c with nilfs2 as the only other user,
the effect of this change should be negligible.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-01-14 15:00:36 +01:00
Yan Hong
02c0ab684f fs/buffer.c: remove redundant initialization in alloc_page_buffers()
buffer_head comes from kmem_cache_zalloc(), no need to zero its fields.

Signed-off-by: Yan Hong <clouds.yan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-12 17:38:35 -08:00
Yan Hong
a3f3c29cb2 fs/buffer.c: do not inline exported function
It makes no sense to inline an exported function.

Signed-off-by: Yan Hong <clouds.yan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-12 17:38:34 -08:00
Rafael Aquini
252aa6f5be mm: redefine address_space.assoc_mapping
Overhaul struct address_space.assoc_mapping renaming it to
address_space.private_data and its type is redefined to void*.  By this
approach we consistently name the .private_* elements from struct
address_space as well as allow extended usage for address_space
association with other data structures through ->private_data.

Also, all users of old ->assoc_mapping element are converted to reflect
its new name and type change (->private_data).

Signed-off-by: Rafael Aquini <aquini@redhat.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-11 17:22:26 -08:00
Dan Carpenter
27d7c2a006 vfs: clear to the end of the buffer on partial buffer reads
READ is zero so the "rw & READ" test is always false.  The intended test
was "((rw & RW_MASK) == READ)".

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-05 10:32:59 -08:00
Linus Torvalds
57302e0ddf vfs: avoid "attempt to access beyond end of device" warnings
The block device access simplification that avoided accessing the (racy)
block size information (commit bbec0270bd: "blkdev_max_block: make
private to fs/buffer.c") no longer checks the maximum block size in the
block mapping path.

That was _almost_ as simple as just removing the code entirely, because
the readers and writers all check the size of the device anyway, so
under normal circumstances it "just worked".

However, the block size may be such that the end of the device may
straddle one single buffer_head.  At which point we may still want to
access the end of the device, but the buffer we use to access it
partially extends past the end.

The 'bd_set_size()' function intentionally sets the block size to avoid
this, but mounting the device - or setting the block size by hand to
some other value - can modify that block size.

So instead, teach 'submit_bh()' about the special case of the buffer
head straddling the end of the device, and turning such an access into a
smaller IO access, avoiding the problem.

This, btw, also means that unlike before, we can now access the whole
device regardless of device block size setting.  So now, even if the
device size is only 512-byte aligned, we can read and write even the
last sector even when having a much bigger block size for accessing the
rest of the device.

So with this, we could now get rid of the 'bd_set_size()' block size
code entirely - resulting in faster IO for the common case - but that
would be a separate patch.

Reported-and-tested-by: Romain Francoise <romain@orebokech.com>
Reporeted-and-tested-by: Meelis Roos <mroos@linux.ee>
Reported-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-04 08:25:11 -08:00
Linus Torvalds
bbec0270bd blkdev_max_block: make private to fs/buffer.c
We really don't want to look at the block size for the raw block device
accesses in fs/block-dev.c, because it may be changing from under us.
So get rid of the max_block logic entirely, since the caller should
already have done it anyway.

That leaves the only user of this function in fs/buffer.c, so move the
whole function there and make it static.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-11-29 17:48:12 -08:00
Linus Torvalds
45bce8f3e3 fs/buffer.c: make block-size be per-page and protected by the page lock
This makes the buffer size handling be a per-page thing, which allows us
to not have to worry about locking too much when changing the buffer
size.  If a page doesn't have buffers, we still need to read the block
size from the inode, but we can do that with ACCESS_ONCE(), so that even
if the size is changing, we get a consistent value.

This doesn't convert all functions - many of the buffer functions are
used purely by filesystems, which in turn results in the buffer size
being fixed at mount-time.  So they don't have the same consistency
issues that the raw device access can have.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-11-29 10:47:20 -08:00
Linus Torvalds
6432f21284 The big new feature added this time is supporting online resizing
using the meta_bg feature.  This allows us to resize file systems
 which are greater than 16TB.  In addition, the speed of online
 resizing has been improved in general.
 
 We also fix a number of races, some of which could lead to deadlocks,
 in ext4's Asynchronous I/O and online defrag support, thanks to good
 work by Dmitry Monakhov.
 
 There are also a large number of more minor bug fixes and cleanups
 from a number of other ext4 contributors, quite of few of which have
 submitted fixes for the first time.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABCAAGBQJQbxMXAAoJENNvdpvBGATwlg4QAJZ4mHNSL2eaaxjRtTbL1pAz
 +FVXpJ3lhw1lSfE9hJGqPVE8EfU2fWjIqxEI7dgh95Tukc5pUnPAQ2/hBz8ZA0qq
 o0AFMk3mRnvCEh6HsZfumsV83eqpR3k/zEy4uFH+KtxBskPe2sEKy3B7qOxvgdKW
 Gh8B2WqF2BpIj9WIT1P9G6xsxZW64EMHTbWcgRhuoRD7bakDNnwQ3kElz/TJQU5q
 bM/5wE7pqKwU2J1L0Ho0mxDi0f/BbXeJdA9k1tQy2KM1pZwHtpj4Ls0qmfoi49GE
 KyZqQOXlFbAz/9tidPDceY5KoRRQm1MwZ+1MimQX1P+40cs/w3pNu3yiibcaXIru
 UZ63AQMCj5JHMcFNVi20sVCwjU/ibNtEO75cfDD4bzPgHJvfCj73EbHTLl21nbTu
 izIMffhJEHmRnmRXiiortYVuI4b19oIfnXg7eclrJoUWSuGwKKsJOc5nMjDqidG4
 B7Gq4TD89sGkIYzx+50E+ll2ispcBN0BQnGqp4k2BzgDyEHhuFYk7VuVQvJgCGTi
 eobzQJj7JUXPWxyemcAVkQTtUq4vVbkm/IwS+/GA9b9Z80X8hR8x6EVHUW5lX3qC
 YHoBSCU4XKZXXWqzx0fIVCXyKKFiBzM+OXcgHOKH90vK8k6kPmPODhNCxvV3pITU
 jfl9q+X1dY4SpybZjLt5
 =iYeV
 -----END PGP SIGNATURE-----

Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4

Pull ext4 updates from Ted Ts'o:
 "The big new feature added this time is supporting online resizing
  using the meta_bg feature.  This allows us to resize file systems
  which are greater than 16TB.  In addition, the speed of online
  resizing has been improved in general.

  We also fix a number of races, some of which could lead to deadlocks,
  in ext4's Asynchronous I/O and online defrag support, thanks to good
  work by Dmitry Monakhov.

  There are also a large number of more minor bug fixes and cleanups
  from a number of other ext4 contributors, quite of few of which have
  submitted fixes for the first time."

* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (69 commits)
  ext4: fix ext4_flush_completed_IO wait semantics
  ext4: fix mtime update in nodelalloc mode
  ext4: fix ext_remove_space for punch_hole case
  ext4: punch_hole should wait for DIO writers
  ext4: serialize truncate with owerwrite DIO workers
  ext4: endless truncate due to nonlocked dio readers
  ext4: serialize unlocked dio reads with truncate
  ext4: serialize dio nonlocked reads with defrag workers
  ext4: completed_io locking cleanup
  ext4: fix unwritten counter leakage
  ext4: give i_aiodio_unwritten a more appropriate name
  ext4: ext4_inode_info diet
  ext4: convert to use leXX_add_cpu()
  ext4: ext4_bread usage audit
  fs: reserve fallocate flag codepoint
  ext4: remove redundant offset check in mext_check_arguments()
  ext4: don't clear orphan list on ro mount with errors
  jbd2: fix assertion failure in commit code due to lacking transaction credits
  ext4: release donor reference when EXT4_IOC_MOVE_EXT ioctl fails
  ext4: enable FITRIM ioctl on bigalloc file system
  ...
2012-10-08 06:36:39 +09:00
Theodore Ts'o
041bbb6d36 ext4: fix mtime update in nodelalloc mode
Commits 5e8830dc85 and 41c4d25f78 introduced a regression into
v3.6-rc1 for ext4 in nodealloc mode, such that mtime updates would not
take place for files modified via mmap if the page was already in the
page cache.  This would also affect ext3 file systems mounted using
the ext4 file system driver.

The problem was that ext4_page_mkwrite() had a shortcut which would
avoid calling __block_page_mkwrite() under some circumstances, and the
above two commit transferred the responsibility of calling
file_update_time() to __block_page_mkwrite --- which woudln't get
called in some circumstances.

Since __block_page_mkwrite() only has three callers,
block_page_mkwrite(), ext4_page_mkwrite, and nilfs_page_mkwrite(), the
best way to solve this is to move the responsibility for calling
file_update_time() to its caller.

This problem was found via xfstests #215 with a file system mounted
with -o nodelalloc.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: KONISHI Ryusuke <konishi.ryusuke@lab.ntt.co.jp>
Cc: stable@vger.kernel.org
2012-09-30 23:04:56 -04:00
Hugh Dickins
676ce6d5ca block: replace __getblk_slow misfix by grow_dev_page fix
Commit 91f68c89d8 ("block: fix infinite loop in __getblk_slow")
is not good: a successful call to grow_buffers() cannot guarantee
that the page won't be reclaimed before the immediate next call to
__find_get_block(), which is why there was always a loop there.

Yesterday I got "EXT4-fs error (device loop0): __ext4_get_inode_loc:3595:
inode #19278: block 664: comm cc1: unable to read itable block" on console,
which pointed to this commit.

I've been trying to bisect for weeks, why kbuild-on-ext4-on-loop-on-tmpfs
sometimes fails from a missing header file, under memory pressure on
ppc G5.  I've never seen this on x86, and I've never seen it on 3.5-rc7
itself, despite that commit being in there: bisection pointed to an
irrelevant pinctrl merge, but hard to tell when failure takes between
18 minutes and 38 hours (but so far it's happened quicker on 3.6-rc2).

(I've since found such __ext4_get_inode_loc errors in /var/log/messages
from previous weeks: why the message never appeared on console until
yesterday morning is a mystery for another day.)

Revert 91f68c89d8, restoring __getblk_slow() to how it was (plus
a checkpatch nitfix).  Simplify the interface between grow_buffers()
and grow_dev_page(), and avoid the infinite loop beyond end of device
by instead checking init_page_buffers()'s end_block there (I presume
that's more efficient than a repeated call to blkdev_max_block()),
returning -ENXIO to __getblk_slow() in that case.

And remove akpm's ten-year-old "__getblk() cannot fail ... weird"
comment, but that is worrying: are all users of __getblk() really
now prepared for a NULL bh beyond end of device, or will some oops??

Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: stable@vger.kernel.org # 3.0 3.2 3.4 3.5
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-08-23 12:17:36 +02:00
Jan Kara
14da920014 fs: Protect write paths by sb_start_write - sb_end_write
There are several entry points which dirty pages in a filesystem.  mmap
(handled by block_page_mkwrite()), buffered write (handled by
__generic_file_aio_write()), splice write (generic_file_splice_write),
truncate, and fallocate (these can dirty last partial page - handled inside
each filesystem separately). Protect these places with sb_start_write() and
sb_end_write().

->page_mkwrite() calls are particularly complex since they are called with
mmap_sem held and thus we cannot use standard sb_start_write() due to lock
ordering constraints. We solve the problem by using a special freeze protection
sb_start_pagefault() which ranks below mmap_sem.

BugLink: https://bugs.launchpad.net/bugs/897421
Tested-by: Kamal Mostafa <kamal@canonical.com>
Tested-by: Peter M. Petrakis <peter.petrakis@canonical.com>
Tested-by: Dann Frazier <dann.frazier@canonical.com>
Tested-by: Massimo Morana <massimo.morana@canonical.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-07-31 09:45:47 +04:00
Jan Kara
5e8830dc85 fs: Push file_update_time() into __block_page_mkwrite()
Tested-by: Kamal Mostafa <kamal@canonical.com>
Tested-by: Peter M. Petrakis <peter.petrakis@canonical.com>
Tested-by: Dann Frazier <dann.frazier@canonical.com>
Tested-by: Massimo Morana <massimo.morana@canonical.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-07-31 01:02:44 +04:00
Jeff Moyer
91f68c89d8 block: fix infinite loop in __getblk_slow
Commit 080399aaaf ("block: don't mark buffers beyond end of disk as
mapped") exposed a bug in __getblk_slow that causes mount to hang as it
loops infinitely waiting for a buffer that lies beyond the end of the
disk to become uptodate.

The problem was initially reported by Torsten Hilbrich here:

    https://lkml.org/lkml/2012/6/18/54

and also reported independently here:

    http://www.sysresccd.org/forums/viewtopic.php?f=13&t=4511

and then Richard W.M.  Jones and Marcos Mello noted a few separate
bugzillas also associated with the same issue.  This patch has been
confirmed to fix:

    https://bugzilla.redhat.com/show_bug.cgi?id=835019

The main problem is here, in __getblk_slow:

        for (;;) {
                struct buffer_head * bh;
                int ret;

                bh = __find_get_block(bdev, block, size);
                if (bh)
                        return bh;

                ret = grow_buffers(bdev, block, size);
                if (ret < 0)
                        return NULL;
                if (ret == 0)
                        free_more_memory();
        }

__find_get_block does not find the block, since it will not be marked as
mapped, and so grow_buffers is called to fill in the buffers for the
associated page.  I believe the for (;;) loop is there primarily to
retry in the case of memory pressure keeping grow_buffers from
succeeding.  However, we also continue to loop for other cases, like the
block lying beond the end of the disk.  So, the fix I came up with is to
only loop when grow_buffers fails due to memory allocation issues
(return value of 0).

The attached patch was tested by myself, Torsten, and Rich, and was
found to resolve the problem in call cases.

Signed-off-by: Jeff Moyer <jmoyer@redhat.com>
Reported-and-Tested-by: Torsten Hilbrich <torsten.hilbrich@secunet.com>
Tested-by: Richard W.M. Jones <rjones@redhat.com>
Reviewed-by: Josh Boyer <jwboyer@redhat.com>
Cc: Stable <stable@vger.kernel.org>  # 3.0+
[ Jens is on vacation, taking this directly  - Linus ]
--
Stable Notes: this patch requires backport to 3.0, 3.2 and 3.3.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-13 08:36:35 -07:00
Shai Fultheim
a0a9b04337 fs: Move bh_cachep to the __read_mostly section
bh_cachep is only written to once on initialization, so move it to the
__read_mostly section.

Signed-off-by: Shai Fultheim <shai@scalemp.com>
Signed-off-by: Vlad Zolotarov <vlad@scalemp.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-05-30 21:04:52 -04:00
Jeff Moyer
080399aaaf block: don't mark buffers beyond end of disk as mapped
Hi,

We have a bug report open where a squashfs image mounted on ppc64 would
exhibit errors due to trying to read beyond the end of the disk.  It can
easily be reproduced by doing the following:

[root@ibm-p750e-02-lp3 ~]# ls -l install.img
-rw-r--r-- 1 root root 142032896 Apr 30 16:46 install.img
[root@ibm-p750e-02-lp3 ~]# mount -o loop ./install.img /mnt/test
[root@ibm-p750e-02-lp3 ~]# dd if=/dev/loop0 of=/dev/null
dd: reading `/dev/loop0': Input/output error
277376+0 records in
277376+0 records out
142016512 bytes (142 MB) copied, 0.9465 s, 150 MB/s

In dmesg, you'll find the following:

squashfs: version 4.0 (2009/01/31) Phillip Lougher
[   43.106012] attempt to access beyond end of device
[   43.106029] loop0: rw=0, want=277410, limit=277408
[   43.106039] Buffer I/O error on device loop0, logical block 138704
[   43.106053] attempt to access beyond end of device
[   43.106057] loop0: rw=0, want=277412, limit=277408
[   43.106061] Buffer I/O error on device loop0, logical block 138705
[   43.106066] attempt to access beyond end of device
[   43.106070] loop0: rw=0, want=277414, limit=277408
[   43.106073] Buffer I/O error on device loop0, logical block 138706
[   43.106078] attempt to access beyond end of device
[   43.106081] loop0: rw=0, want=277416, limit=277408
[   43.106085] Buffer I/O error on device loop0, logical block 138707
[   43.106089] attempt to access beyond end of device
[   43.106093] loop0: rw=0, want=277418, limit=277408
[   43.106096] Buffer I/O error on device loop0, logical block 138708
[   43.106101] attempt to access beyond end of device
[   43.106104] loop0: rw=0, want=277420, limit=277408
[   43.106108] Buffer I/O error on device loop0, logical block 138709
[   43.106112] attempt to access beyond end of device
[   43.106116] loop0: rw=0, want=277422, limit=277408
[   43.106120] Buffer I/O error on device loop0, logical block 138710
[   43.106124] attempt to access beyond end of device
[   43.106128] loop0: rw=0, want=277424, limit=277408
[   43.106131] Buffer I/O error on device loop0, logical block 138711
[   43.106135] attempt to access beyond end of device
[   43.106139] loop0: rw=0, want=277426, limit=277408
[   43.106143] Buffer I/O error on device loop0, logical block 138712
[   43.106147] attempt to access beyond end of device
[   43.106151] loop0: rw=0, want=277428, limit=277408
[   43.106154] Buffer I/O error on device loop0, logical block 138713
[   43.106158] attempt to access beyond end of device
[   43.106162] loop0: rw=0, want=277430, limit=277408
[   43.106166] attempt to access beyond end of device
[   43.106169] loop0: rw=0, want=277432, limit=277408
...
[   43.106307] attempt to access beyond end of device
[   43.106311] loop0: rw=0, want=277470, limit=2774

Squashfs manages to read in the end block(s) of the disk during the
mount operation.  Then, when dd reads the block device, it leads to
block_read_full_page being called with buffers that are beyond end of
disk, but are marked as mapped.  Thus, it would end up submitting read
I/O against them, resulting in the errors mentioned above.  I fixed the
problem by modifying init_page_buffers to only set the buffer mapped if
it fell inside of i_size.

Cheers,
Jeff

Signed-off-by: Jeff Moyer <jmoyer@redhat.com>
Acked-by: Nick Piggin <npiggin@kernel.dk>

--

Changes from v1->v2: re-used max_block, as suggested by Nick Piggin.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-05-11 16:42:14 +02:00
Glauber Costa
61065a30af fs/buffer.c: remove BUG() in possible but rare condition
While stressing the kernel with with failing allocations today, I hit the
following chain of events:

alloc_page_buffers():

	bh = alloc_buffer_head(GFP_NOFS);
	if (!bh)
		goto no_grow; <= path taken

grow_dev_page():
        bh = alloc_page_buffers(page, size, 0);
        if (!bh)
                goto failed;  <= taken, consequence of the above

and then the failed path BUG()s the kernel.

The failure is inserted a litte bit artificially, but even then, I see no
reason why it should be deemed impossible in a real box.

Even though this is not a condition that we expect to see around every
time, failed allocations are expected to be handled, and BUG() sounds just
too much.  As a matter of fact, grow_dev_page() can return NULL just fine
in other circumstances, so I propose we just remove it, then.

Signed-off-by: Glauber Costa <glommer@parallels.com>
Cc: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-04-25 21:26:33 -07:00
Gilad Ben-Yossef
42be35d039 fs: only send IPI to invalidate LRU BH when needed
In several code paths, such as when unmounting a file system (but not
only) we send an IPI to ask each cpu to invalidate its local LRU BHs.

For multi-cores systems that have many cpus that may not have any LRU BH
because they are idle or because they have not performed any file system
accesses since last invalidation (e.g.  CPU crunching on high perfomance
computing nodes that write results to shared memory or only using
filesystems that do not use the bh layer.) This can lead to loss of
performance each time someone switches the KVM (the virtual keyboard and
screen type, not the hypervisor) if it has a USB storage stuck in.

This patch attempts to only send an IPI to cpus that have LRU BH.

Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-28 17:14:35 -07:00
Paul Gortmaker
630d9c4727 fs: reduce the use of module.h wherever possible
For files only using THIS_MODULE and/or EXPORT_SYMBOL, map
them onto including export.h -- or if the file isn't even
using those, then just delete the include.  Fix up any implicit
include dependencies that were being masked by module.h along
the way.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-02-28 19:31:58 -05:00
Al Viro
ff01bb4832 fs: move code out of buffer.c
Move invalidate_bdev, block_sync_page into fs/block_dev.c.  Export
kill_bdev as well, so brd doesn't have to open code it.  Reduce
buffer_head.h requirement accordingly.

Removed a rather large comment from invalidate_bdev, as it looked a bit
obsolete to bother moving.  The small comment replacing it says enough.

Signed-off-by: Nick Piggin <npiggin@suse.de>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03 22:54:07 -05:00
Linus Torvalds
208bca0860 Merge branch 'writeback-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/wfg/linux
* 'writeback-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/wfg/linux:
  writeback: Add a 'reason' to wb_writeback_work
  writeback: send work item to queue_io, move_expired_inodes
  writeback: trace event balance_dirty_pages
  writeback: trace event bdi_dirty_ratelimit
  writeback: fix ppc compile warnings on do_div(long long, unsigned long)
  writeback: per-bdi background threshold
  writeback: dirty position control - bdi reserve area
  writeback: control dirty pause time
  writeback: limit max dirty pause time
  writeback: IO-less balance_dirty_pages()
  writeback: per task dirty rate limit
  writeback: stabilize bdi->dirty_ratelimit
  writeback: dirty rate control
  writeback: add bg_threshold parameter to __bdi_update_bandwidth()
  writeback: dirty position control
  writeback: account per-bdi accumulated dirtied pages
2011-11-06 19:02:23 -08:00
Tao Ma
72a2ebd8bc fs/buffer.c: add device information for error output in __find_get_block_slow()
On the ext4 mailing list[1], we got some report about errors in
__find_get_block_slow(), but the information is very limited.

If the device information is given, we can know the name of the sick
volume.  Futhermore, we can get the corresponding status of that
block(group, inode block etc) by analyzing the disk layout.

[1] http://marc.info/?l=linux-ext4&m=131379831421147&w=2

Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-10-31 17:30:49 -07:00
Curt Wohlgemuth
0e175a1835 writeback: Add a 'reason' to wb_writeback_work
This creates a new 'reason' field in a wb_writeback_work
structure, which unambiguously identifies who initiates
writeback activity.  A 'wb_reason' enumeration has been
added to writeback.h, to enumerate the possible reasons.

The 'writeback_work_class' and tracepoint event class and
'writeback_queue_io' tracepoints are updated to include the
symbolic 'reason' in all trace events.

And the 'writeback_inodes_sbXXX' family of routines has had
a wb_stats parameter added to them, so callers can specify
why writeback is being started.

Acked-by: Jan Kara <jack@suse.cz>
Signed-off-by: Curt Wohlgemuth <curtw@google.com>
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
2011-10-31 00:33:36 +08:00