This IV is used in some BitLocker devices with CBC encryption mode.
IV is encrypted little-endian byte-offset (with the same key and cipher
as the volume).
Signed-off-by: Milan Broz <gmazyland@gmail.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
The URL is no longer valid and the comment is obsolete anyway
(the plumb IV was never used).
Signed-off-by: Milan Broz <gmazyland@gmail.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
If a private IV wipe function fails, the code does not set the key
invalid flag. To fix this, move code to after the flag is set to
prevent the device from resuming in an inconsistent state.
Also, this allows using of a randomized key in private wipe function
(to be used in a following commit).
Signed-off-by: Milan Broz <gmazyland@gmail.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Since commit a1ce35fa49 ("block: remove dead elevator
code") blk_end_request() has been replaced with blk_mq_end_request().
So update comment to reference blk_mq_end_request() accordingly.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
dm-log-writes records the sequence of completion, not submission, thus
for the following sequence (W=write, C=complete):
Wa,Wb,Wc,Cc,Ca,FLUSH,FUAd,Cb,CFLUSH,CFUAd
The logged results in log device should be:
c,a,b,flush,fua
Fix the comment to give a better example.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Use struct_size() to avoid open-coded equivalent that is prone to a type
mistake.
Signed-off-by: Zhengyuan Liu <liuzhengyuan@kylinos.cn>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Use struct_size() to avoid open-coded equivalent that is prone to a type
mistake.
Signed-off-by: Zhengyuan Liu <liuzhengyuan@kylinos.cn>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
The new integrity bitmap mode uses the dirty flag. The dirty flag
should not be set in older superblock versions.
The current code sets it unconditionally, even if the superblock
was already formatted without bitmap in older system.
Fix this by moving the version check to one common place and check
version on every superblock write.
Signed-off-by: Milan Broz <gmazyland@gmail.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Check if in fail_io mode at start of dm_pool_metadata_set_needs_check().
Otherwise dm_pool_metadata_set_needs_check()'s superblock_lock() can
crash in dm_bm_write_lock() while accessing the block manager object
that was previously destroyed as part of a failed
dm_pool_abort_metadata() that ultimately set fail_io to begin with.
Also, update DMERR() message to more accurately describe
superblock_lock() failure.
Cc: stable@vger.kernel.org
Reported-by: Zdenek Kabelac <zkabelac@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
DM verity should also use DMERR_LIMIT to limit repeat data block
corruption messages.
Signed-off-by: Milan Broz <gmazyland@gmail.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
For the first call to realloc_argv() in dm_split_args(), old_argv is
NULL and size is zero. Then memcpy is called, with the NULL old_argv
as the source argument and a zero size argument. AFAIK, this is
undefined behavior and generates the following warning when compiled
with UBSAN on ppc64le:
In file included from ./arch/powerpc/include/asm/paca.h:19,
from ./arch/powerpc/include/asm/current.h:16,
from ./include/linux/sched.h:12,
from ./include/linux/kthread.h:6,
from drivers/md/dm-core.h:12,
from drivers/md/dm-table.c:8:
In function 'memcpy',
inlined from 'realloc_argv' at drivers/md/dm-table.c:565:3,
inlined from 'dm_split_args' at drivers/md/dm-table.c:588:9:
./include/linux/string.h:345:9: error: argument 2 null where non-null expected [-Werror=nonnull]
return __builtin_memcpy(p, q, size);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/md/dm-table.c: In function 'dm_split_args':
./include/linux/string.h:345:9: note: in a call to built-in function '__builtin_memcpy'
Signed-off-by: Jerome Marchand <jmarchan@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Currently, although we submit super bios in order (and super.nr_entries
is incremented by each logged entry), submit_bio() is async so each
super sector may not be written to log device in order and then the
final nr_entries may be smaller than it should be.
This problem can be reproduced by the xfstests generic/455 with ext4:
QA output created by 455
-Silence is golden
+mark 'end' does not exist
Fix this by serializing submission of super sectors to make sure each
is written to the log disk in order.
Fixes: 0e9cebe724 ("dm: add log writes target")
Cc: stable@vger.kernel.org
Signed-off-by: zhangyi (F) <yi.zhang@huawei.com>
Suggested-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
These printing macros already add a trailing newline, so having another
one here just makes for blank lines when these prints are enabled.
Remove these needless newlines.
Fixes: 6bbc923dfc ("dm: add support to directly boot to a mapped device")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Fix 2 kstrndup() calls with incorrect argument order.
Fixes: 6bbc923dfc ("dm: add support to directly boot to a mapped device")
Cc: stable@vger.kernel.org # v5.1
Signed-off-by: Gen Zhang <blackgod016574@gmail.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
When people set a writeback percent via sysfs file,
/sys/block/bcache<N>/bcache/writeback_percent
current code directly sets BCACHE_DEV_WB_RUNNING to dc->disk.flags
and schedules kworker dc->writeback_rate_update.
If there is no cache set attached to, the writeback kernel thread is
not running indeed, running dc->writeback_rate_update does not make
sense and may cause NULL pointer deference when reference cache set
pointer inside update_writeback_rate().
This patch checks whether the cache set point (dc->disk.c) is NULL in
sysfs interface handler, and only set BCACHE_DEV_WB_RUNNING and
schedule dc->writeback_rate_update when dc->disk.c is not NULL (it
means the cache device is attached to a cache set).
This problem might be introduced from initial bcache commit, but
commit 3fd47bfe55 ("bcache: stop dc->writeback_rate_update properly")
changes part of the original code piece, so I add 'Fixes: 3fd47bfe55b0'
to indicate from which commit this patch can be applied.
Fixes: 3fd47bfe55 ("bcache: stop dc->writeback_rate_update properly")
Reported-by: Bjørn Forsman <bjorn.forsman@gmail.com>
Signed-off-by: Coly Li <colyli@suse.de>
Reviewed-by: Bjørn Forsman <bjorn.forsman@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Recently people report bcache code compiled with gcc9 is broken, one of
the buggy behavior I observe is that two adjacent 4KB I/Os should merge
into one but they don't. Finally it turns out to be a stack corruption
caused by macro PRECEDING_KEY().
See how PRECEDING_KEY() is defined in bset.h,
437 #define PRECEDING_KEY(_k) \
438 ({ \
439 struct bkey *_ret = NULL; \
440 \
441 if (KEY_INODE(_k) || KEY_OFFSET(_k)) { \
442 _ret = &KEY(KEY_INODE(_k), KEY_OFFSET(_k), 0); \
443 \
444 if (!_ret->low) \
445 _ret->high--; \
446 _ret->low--; \
447 } \
448 \
449 _ret; \
450 })
At line 442, _ret points to address of a on-stack variable combined by
KEY(), the life range of this on-stack variable is in line 442-446,
once _ret is returned to bch_btree_insert_key(), the returned address
points to an invalid stack address and this address is overwritten in
the following called bch_btree_iter_init(). Then argument 'search' of
bch_btree_iter_init() points to some address inside stackframe of
bch_btree_iter_init(), exact address depends on how the compiler
allocates stack space. Now the stack is corrupted.
Fixes: 0eacac2203 ("bcache: PRECEDING_KEY()")
Signed-off-by: Coly Li <colyli@suse.de>
Reviewed-by: Rolf Fokkens <rolf@rolffokkens.nl>
Reviewed-by: Pierre JUHEN <pierre.juhen@orange.fr>
Tested-by: Shenghui Wang <shhuiw@foxmail.com>
Tested-by: Pierre JUHEN <pierre.juhen@orange.fr>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Nix <nix@esperi.org.uk>
Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Based on 1 normalized pattern(s):
this file is released under the gplv2
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 68 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Armijn Hemel <armijn@tjaldur.nl>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190531190114.292346262@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms and conditions of the gnu general public license
version 2 as published by the free software foundation this program
is distributed in the hope it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 263 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190529141901.208660670@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version this program is distributed in the
hope that it will be useful but without any warranty without even
the implied warranty of merchantability or fitness for a particular
purpose see the gnu general public license for more details you
should have received a copy of the gnu general public license along
with this program if not write to the free software foundation inc
59 temple place suite 330 boston ma 02111 1307 usa
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 1334 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070033.113240726@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 3029 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Here is another set of reviewed patches that adds SPDX tags to different
kernel files, based on a set of rules that are being used to parse the
comments to try to determine that the license of the file is
"GPL-2.0-or-later". Only the "obvious" versions of these matches are
included here, a number of "non-obvious" variants of text have been
found but those have been postponed for later review and analysis.
These patches have been out for review on the linux-spdx@vger mailing
list, and while they were created by automatic tools, they were
hand-verified by a bunch of different people, all whom names are on the
patches are reviewers.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXOgmlw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yk4rACfRqxGOGVLR/t6E9dDzOZRAdEz/mYAoJLZmziY
0YlSSSPtP5HI6JDh65Ng
=HXQb
-----END PGP SIGNATURE-----
Merge tag 'spdx-5.2-rc2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pule more SPDX updates from Greg KH:
"Here is another set of reviewed patches that adds SPDX tags to
different kernel files, based on a set of rules that are being used to
parse the comments to try to determine that the license of the file is
"GPL-2.0-or-later".
Only the "obvious" versions of these matches are included here, a
number of "non-obvious" variants of text have been found but those
have been postponed for later review and analysis.
These patches have been out for review on the linux-spdx@vger mailing
list, and while they were created by automatic tools, they were
hand-verified by a bunch of different people, all whom names are on
the patches are reviewers"
* tag 'spdx-5.2-rc2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (85 commits)
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 125
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 123
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 122
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 121
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 120
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 119
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 118
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 116
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 114
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 113
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 112
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 111
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 110
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 106
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 105
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 104
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 103
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 102
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 101
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 98
...
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 or at your option any
later version you should have received a copy of the gnu general
public license for example usr src linux copying if not write to the
free software foundation inc 675 mass ave cambridge ma 02139 usa
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 20 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190520170858.552543146@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 or at your option any
later version
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 11 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190520170858.370933192@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
doesn't properly trim special IOs (e.g. discards) relative to
corresponding target's max_io_len_target_boundary().
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEJfWUX4UqZ4x1O2wixSPxCi2dA1oFAlzkicQTHHNuaXR6ZXJA
cmVkaGF0LmNvbQAKCRDFI/EKLZ0DWuRcCADKc4zew1EAhcHjwanfWoQ2d+5ONdxv
Ir1yiQX3hqK96G1Vu4IROsxWPDgNBI+60HwWI0z3/nMdv4F9a9Tfowl9fcKgZNey
jGrzP7x1+9GPtJY0BIpFUQ895qC75wXdd0c6HjmM5IaN0DRrv783ZMMBNhS6yx84
2vDThiEpGiDKUXHTP9b1khUbZzvkpTmlk293UlkFDftgejfW5mq1FqbjLfACMNVI
Nh7D6A7MjFrEKHjvNbiGgeFn93iW1+XqGbsFobuCV8Z4A0ImD85H78Lesri2qrRG
nxGfTZMyq++SGSOV/JTzZ4k/qkZfkrDyljYiPaTgZpCi1mZYQ6wH8+7u
=oKZ5
-----END PGP SIGNATURE-----
Merge tag 'for-5.2/dm-fix-1' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fix from Mike Snitzer:
"Fix a particularly glaring oversight in a DM core commit from 5.1 that
doesn't properly trim special IOs (e.g. discards) relative to
corresponding target's max_io_len_target_boundary()"
* tag 'for-5.2/dm-fix-1' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm: make sure to obey max_io_len_target_boundary
Commit 61697a6abd ("dm: eliminate 'split_discard_bios' flag from DM
target interface") incorrectly removed code from
__send_changing_extent_only() that is required to impose a per-target IO
boundary on IO that exceeds max_io_len_target_boundary(). Otherwise
"special" IO (e.g. DISCARD, WRITE SAME, WRITE ZEROES) can write beyond
where allowed.
Fix this by restoring the max_io_len_target_boundary() limit in
__send_changing_extent_only()
Fixes: 61697a6abd ("dm: eliminate 'split_discard_bios' flag from DM target interface")
Cc: stable@vger.kernel.org # 5.1+
Signed-off-by: Michael Lass <bevan@bi-co.net>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Add SPDX license identifiers to all Make/Kconfig files which:
- Have no license information of any form
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add SPDX license identifiers to all files which:
- Have no license information of any form
- Have MODULE_LICENCE("GPL*") inside which was used in the initial
scan/conversion to ignore the file
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add SPDX license identifiers to all files which:
- Have no license information of any form
- Have EXPORT_.*_SYMBOL_GPL inside which was used in the
initial scan/conversion to ignore the file
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pankaj reports that starting with commit ad428cdb52 "dax: Check the
end of the block-device capacity with dax_direct_access()" device-mapper
no longer allows dax operation. This results from the stricter checks in
__bdev_dax_supported() that validate that the start and end of a
block-device map to the same 'pagemap' instance.
Teach the dax-core and device-mapper to validate the 'pagemap' on a
per-target basis. This is accomplished by refactoring the
bdev_dax_supported() internals into generic_fsdax_supported() which
takes a sector range to validate. Consequently generic_fsdax_supported()
is suitable to be used in a device-mapper ->iterate_devices() callback.
A new ->dax_supported() operation is added to allow composite devices to
split and route upper-level bdev_dax_supported() requests.
Fixes: ad428cdb52 ("dax: Check the end of the block-device...")
Cc: <stable@vger.kernel.org>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reported-by: Pankaj Gupta <pagupta@redhat.com>
Reviewed-by: Pankaj Gupta <pagupta@redhat.com>
Tested-by: Pankaj Gupta <pagupta@redhat.com>
Tested-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
locking. Requires some list_bl interface improvements.
- Add ability for DM integrity to use a bitmap mode, that tracks regions
where data and metadata are out of sync, instead of using a journal.
- Improve DM thin provisioning target to not write metadata changes to
disk if the thin-pool and associated thin devices are merely
activated but not used. This avoids metadata corruption due to
concurrent activation of thin devices across different OS instances
(e.g. split brain scenarios, which ultimately would be avoided if
proper device filters were used -- but not having proper filtering has
proven a very common configuration mistake)
- Fix missing call to path selector type->end_io in DM multipath. This
fixes reported performance problems due to inaccurate path selector IO
accounting causing an imbalance of IO (e.g. avoiding issuing IO to
particular path due to it seemingly being heavily used).
- Fix bug in DM cache metadata's loading of its discard bitset that
could lead to all cache blocks being discarded if the very first cache
block was discarded (thankfully in practice the first cache block is
generally in use; be it FS superblock, partition table, disk label,
etc).
- Add testing-only DM dust target which simulates a device that has
failing sectors and/or read failures.
- Fix a DM init error path reference count hang that caused boot hangs
if user supplied malformed input on kernel commandline.
- Fix a couple issues with DM crypt target's logging being overly
verbose or lacking context.
- Various other small fixes to DM init, DM multipath, DM zoned, and DM
crypt.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEJfWUX4UqZ4x1O2wixSPxCi2dA1oFAlzdcCgTHHNuaXR6ZXJA
cmVkaGF0LmNvbQAKCRDFI/EKLZ0DWsxZB/9idHl8LmwwL1JzBfi/XX7bWxwqDQLo
j1b3ycQ14AKVau4VCkmgDuRIfMDuU6PIAVvsMeVbF3aCE0fZ7zbEV1qHefbtJuCL
MMm//KbrhIT8oMKYUWtlOj7XI9MT6ErFzfActBZ6UF6r21m1N3bohhVGN7kvCnJm
wgmSlnz/m2GLKK8gQx+OisnAh0nlje3PIdIYPu7uWN6t0FF2XRz3UwWTuyw7lYhC
Rx2J+sOIL02CtadhHKLMCG8OutRXWP01cBSohUVJIMGihWfbe6aqvhG5afbqb4bG
UQrXl477ry5zyQ4fAU2JKZ+8qFvc1FoLLknKrZQu+uYPRokUPw/AwiL7
=mOH3
-----END PGP SIGNATURE-----
Merge tag 'for-5.2/dm-changes-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper updates from Mike Snitzer:
- Improve DM snapshot target's scalability by using finer grained
locking. Requires some list_bl interface improvements.
- Add ability for DM integrity to use a bitmap mode, that tracks
regions where data and metadata are out of sync, instead of using a
journal.
- Improve DM thin provisioning target to not write metadata changes to
disk if the thin-pool and associated thin devices are merely
activated but not used. This avoids metadata corruption due to
concurrent activation of thin devices across different OS instances
(e.g. split brain scenarios, which ultimately would be avoided if
proper device filters were used -- but not having proper filtering
has proven a very common configuration mistake)
- Fix missing call to path selector type->end_io in DM multipath. This
fixes reported performance problems due to inaccurate path selector
IO accounting causing an imbalance of IO (e.g. avoiding issuing IO to
particular path due to it seemingly being heavily used).
- Fix bug in DM cache metadata's loading of its discard bitset that
could lead to all cache blocks being discarded if the very first
cache block was discarded (thankfully in practice the first cache
block is generally in use; be it FS superblock, partition table, disk
label, etc).
- Add testing-only DM dust target which simulates a device that has
failing sectors and/or read failures.
- Fix a DM init error path reference count hang that caused boot hangs
if user supplied malformed input on kernel commandline.
- Fix a couple issues with DM crypt target's logging being overly
verbose or lacking context.
- Various other small fixes to DM init, DM multipath, DM zoned, and DM
crypt.
* tag 'for-5.2/dm-changes-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (42 commits)
dm: fix a couple brace coding style issues
dm crypt: print device name in integrity error message
dm crypt: move detailed message into debug level
dm ioctl: fix hang in early create error condition
dm integrity: whitespace, coding style and dead code cleanup
dm integrity: implement synchronous mode for reboot handling
dm integrity: handle machine reboot in bitmap mode
dm integrity: add a bitmap mode
dm integrity: introduce a function add_new_range_and_wait()
dm integrity: allow large ranges to be described
dm ingerity: pass size to dm_integrity_alloc_page_list()
dm integrity: introduce rw_journal_sectors()
dm integrity: update documentation
dm integrity: don't report unused options
dm integrity: don't check null pointer before kvfree and vfree
dm integrity: correctly calculate the size of metadata area
dm dust: Make dm_dust_init and dm_dust_exit static
dm dust: remove redundant unsigned comparison to less than zero
dm mpath: always free attached_handler_name in parse_path()
dm init: fix max devices/targets checks
...
This message should better identify the DM device with the integrity
failure.
Signed-off-by: Milan Broz <gmazyland@gmail.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
The information about tag size should not be printed without debug info
set. Also print device major:minor in the error message to identify the
device instance.
Also use rate limiting and debug level for info about used crypto API
implementaton. This is important because during online reencryption
the existing message saturates syslog (because we are moving hotzone
across the whole device).
Cc: stable@vger.kernel.org
Signed-off-by: Milan Broz <gmazyland@gmail.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
The dm_early_create() function (which deals with "dm-mod.create=" kernel
command line option) calls dm_hash_insert() who gets an extra reference
to the md object.
In case of failure, this reference wasn't being released, causing
dm_destroy() to hang, thus hanging the whole boot process.
Fix this by calling __hash_remove() in the error path.
Fixes: 6bbc923dfc ("dm: add support to directly boot to a mapped device")
Cc: stable@vger.kernel.org
Signed-off-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Just some things that stood out like a sore thumb.
Also, converted some printk(KERN_CRIT, ...) to DMCRIT(...)
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Unfortunatelly, there may be bios coming even after the reboot notifier
was called. We don't want these bios to make the bitmap dirty again.
To address this, implement a synchronous mode - when a bio is about to
be terminated, we clean the bitmap and terminate the bio after the clean
operation succeeds. This obviously slows down bio processing, but it
makes sure that when all bios are finished, the bitmap will be clean.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
When in bitmap mode the bitmap must be cleared when rebooting. This
commit adds the reboot hook.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Introduce an alternate mode of operation where dm-integrity uses a
bitmap instead of a journal. If a bit in the bitmap is 1, the
corresponding region's data and integrity tags are not synchronized - if
the machine crashes, the unsynchronized regions will be recalculated.
The bitmap mode is faster than the journal mode, because we don't have
to write the data twice, but it is also less reliable, because if data
corruption happens when the machine crashes, it may not be detected.
Benchmark results for an SSD connected to a SATA300 port, when doing
large linear writes with dd:
buffered I/O:
raw device throughput - 245MB/s
dm-integrity with journaling - 120MB/s
dm-integrity with bitmap - 238MB/s
direct I/O with 1MB block size:
raw device throughput - 248MB/s
dm-integrity with journaling - 123MB/s
dm-integrity with bitmap - 223MB/s
For more info see dm-integrity in Documentation/device-mapper/
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Introduce a function add_new_range_and_wait() in order to avoid
repetitive code. It will be used in the following commit.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
-----BEGIN PGP SIGNATURE-----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=Ot0g
-----END PGP SIGNATURE-----
Merge tag 'for-5.2/block-20190507' of git://git.kernel.dk/linux-block
Pull block updates from Jens Axboe:
"Nothing major in this series, just fixes and improvements all over the
map. This contains:
- Series of fixes for sed-opal (David, Jonas)
- Fixes and performance tweaks for BFQ (via Paolo)
- Set of fixes for bcache (via Coly)
- Set of fixes for md (via Song)
- Enabling multi-page for passthrough requests (Ming)
- Queue release fix series (Ming)
- Device notification improvements (Martin)
- Propagate underlying device rotational status in loop (Holger)
- Removal of mtip32xx trim support, which has been disabled for years
(Christoph)
- Improvement and cleanup of nvme command handling (Christoph)
- Add block SPDX tags (Christoph)
- Cleanup/hardening of bio/bvec iteration (Christoph)
- A few NVMe pull requests (Christoph)
- Removal of CONFIG_LBDAF (Christoph)
- Various little fixes here and there"
* tag 'for-5.2/block-20190507' of git://git.kernel.dk/linux-block: (164 commits)
block: fix mismerge in bvec_advance
block: don't drain in-progress dispatch in blk_cleanup_queue()
blk-mq: move cancel of hctx->run_work into blk_mq_hw_sysfs_release
blk-mq: always free hctx after request queue is freed
blk-mq: split blk_mq_alloc_and_init_hctx into two parts
blk-mq: free hw queue's resource in hctx's release handler
blk-mq: move cancel of requeue_work into blk_mq_release
blk-mq: grab .q_usage_counter when queuing request from plug code path
block: fix function name in comment
nvmet: protect discovery change log event list iteration
nvme: mark nvme_core_init and nvme_core_exit static
nvme: move command size checks to the core
nvme-fabrics: check more command sizes
nvme-pci: check more command sizes
nvme-pci: remove an unneeded variable initialization
nvme-pci: unquiesce admin queue on shutdown
nvme-pci: shutdown on timeout during deletion
nvme-pci: fix psdt field for single segment sgls
nvme-multipath: don't print ANA group state by default
nvme-multipath: split bios with the ns_head bio_set before submitting
...
Change n_sectors data type from unsigned to sector_t. Following commits
will need to lock large ranges.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Pass size to dm_integrity_alloc_page_list(). This is needed so
following commits can pass a size that is different from
ic->journal_pages.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Introduce a function rw_journal_sectors() that takes sector and length
as its arguments instead of a section and the number of sections.
This functions will be used in further patches.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Update documentation with the "meta_device" parameter and flags.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
If we are not journaling, don't report journaling options in the table
status.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
The functions kfree, vfree and kvfree do nothing if we pass a NULL
pointer to them. So we don't need to test the pointer for NULL.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
When we use separate devices for data and metadata, dm-integrity would
incorrectly calculate the size of the metadata device as if it had
512-byte block size - and it would refuse activation with larger block
size and smaller metadata device.
Fix this so that it takes actual block size into account, which fixes
the following reported issue:
https://gitlab.com/cryptsetup/cryptsetup/issues/450
Fixes: 356d9d52e1 ("dm integrity: allow separate metadata device")
Cc: stable@vger.kernel.org # v4.19+
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Fix sparse warnings:
drivers/md/dm-dust.c:495:12: warning: symbol 'dm_dust_init' was not declared. Should it be static?
drivers/md/dm-dust.c:505:13: warning: symbol 'dm_dust_exit' was not declared. Should it be static?
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
