2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-23 04:34:11 +08:00
Commit Graph

21 Commits

Author SHA1 Message Date
Archit Taneja
b923d40dd4 ARM: OMAP2PLUS: DSS: Ensure DSS works correctly if display is enabled in bootloader
Resetting DISPC when a DISPC output is enabled causes the DSS to go into an
inconsistent state. Thus if the bootloader has enabled a display, the hwmod code
cannot reset the DISPC module just like that, but the outputs need to be
disabled first.

Add function dispc_disable_outputs() which disables all active overlay manager
and ensure all frame transfers are completed.

Modify omap_dss_reset() to call this function and clear DSS_CONTROL,
DSS_SDI_CONTROL and DSS_PLL_CONTROL so that DSS is in a clean state when the
DSS2 driver starts.

This resolves the hang issue(caused by a L3 error during boot) seen on the
beagle board C3, which has a factory bootloader that enables display. The issue
is resolved with this patch.

Thanks to Tomi and Sricharan for some additional testing.

Acked-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Tested-by: R, Sricharan <r.sricharan@ti.com>
Signed-off-by: Archit Taneja <archit@ti.com>
[paul@pwsan.com: restructured code, removed omap_{read,write}l(), removed
 cpu_is_omap*() calls and converted to dev_attr]
Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-11-08 03:16:46 -07:00
Tomi Valkeinen
13662dc5b1 ARM: OMAP: HWMOD: Unify DSS resets for OMAPs
This patch adds a custom DSS reset function used on OMAPs from OMAP2
forward.

The function doesn't actually do a reset, it only waits for the reset to
complete. The reason for this is that on OMAP4 there is no possibility
to do a SW reset, and on OMAP2/3 doing a SW reset for dss_core resets
all the other DSS modules also, thus breaking the HWMOD model where
every DSS module is handled independently.

This fixes the problem with DSS reset on OMAP4, caused by the fact that
because there's no SW reset for dss_core on OMAP4, the HWMOD framework
doesn't try to reset dss_core and thus the DSS clocks were never enabled
at the same time. This causes causes the HWMOD reset to fail for
dss_dispc and dss_rfbi.

The common reset function will also allow us to fix another problem in
the future: before doing a reset we need to disable DSS outputs, which
are in some cases enabled by the bootloader, as otherwise DSS HW seems
to get more or less stuck, requiring a power reset to recover.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
[paul@pwsan.com: modified to build arch/arm/mach-omap2/display.o
 unconditionally to avoid an error when !CONFIG_OMAP2_DSS]
Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-11-08 03:16:13 -07:00
Linus Torvalds
32aaeffbd4 Merge branch 'modsplit-Oct31_2011' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux
* 'modsplit-Oct31_2011' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: (230 commits)
  Revert "tracing: Include module.h in define_trace.h"
  irq: don't put module.h into irq.h for tracking irqgen modules.
  bluetooth: macroize two small inlines to avoid module.h
  ip_vs.h: fix implicit use of module_get/module_put from module.h
  nf_conntrack.h: fix up fallout from implicit moduleparam.h presence
  include: replace linux/module.h with "struct module" wherever possible
  include: convert various register fcns to macros to avoid include chaining
  crypto.h: remove unused crypto_tfm_alg_modname() inline
  uwb.h: fix implicit use of asm/page.h for PAGE_SIZE
  pm_runtime.h: explicitly requires notifier.h
  linux/dmaengine.h: fix implicit use of bitmap.h and asm/page.h
  miscdevice.h: fix up implicit use of lists and types
  stop_machine.h: fix implicit use of smp.h for smp_processor_id
  of: fix implicit use of errno.h in include/linux/of.h
  of_platform.h: delete needless include <linux/module.h>
  acpi: remove module.h include from platform/aclinux.h
  miscdevice.h: delete unnecessary inclusion of module.h
  device_cgroup.h: delete needless include <linux/module.h>
  net: sch_generic remove redundant use of <linux/module.h>
  net: inet_timewait_sock doesnt need <linux/module.h>
  ...

Fix up trivial conflicts (other header files, and  removal of the ab3550 mfd driver) in
 - drivers/media/dvb/frontends/dibx000_common.c
 - drivers/media/video/{mt9m111.c,ov6650.c}
 - drivers/mfd/ab3550-core.c
 - include/linux/dmaengine.h
2011-11-06 19:44:47 -08:00
Linus Torvalds
81a3c10ce8 Merge branch 'next/cleanup2' of git://git.linaro.org/people/arnd/arm-soc
* 'next/cleanup2' of git://git.linaro.org/people/arnd/arm-soc: (31 commits)
  ARM: OMAP: Warn if omap_ioremap is called before SoC detection
  ARM: OMAP: Move set_globals initialization to happen in init_early
  ARM: OMAP: Map SRAM later on with ioremap_exec()
  ARM: OMAP: Remove calls to SRAM allocations for framebuffer
  ARM: OMAP: Avoid cpu_is_omapxxxx usage until map_io is done
  ARM: OMAP1: Use generic map_io, init_early and init_irq
  arm/dts: OMAP3+: Add mpu, dsp and iva nodes
  arm/dts: OMAP4: Add a main ocp entry bound to l3-noc driver
  ARM: OMAP2+: l3-noc: Add support for device-tree
  ARM: OMAP2+: board-generic: Add i2c static init
  ARM: OMAP2+: board-generic: Add DT support to generic board
  arm/dts: Add support for OMAP3 Beagle board
  arm/dts: Add initial device tree support for OMAP3 SoC
  arm/dts: Add support for OMAP4 SDP board
  arm/dts: Add support for OMAP4 PandaBoard
  arm/dts: Add initial device tree support for OMAP4 SoC
  ARM: OMAP: omap_device: Add a method to build an omap_device from a DT node
  ARM: OMAP: omap_device: Add omap_device_[alloc|delete] for DT integration
  of: Add helpers to get one string in multiple strings property
  ARM: OMAP2+: devices: Remove all omap_device_pm_latency structures
  ...

Fix up trivial header file conflicts in arch/arm/mach-omap2/board-generic.c
2011-11-01 20:58:25 -07:00
Paul Gortmaker
d44b28c49e arm: fix implicit memset/string.h usage in various arch/arm files
To fix things like this:

arch/arm/mach-omap2/usb-tusb6010.c:58: error: implicit declaration of function 'memset'
arch/arm/kernel/leds.c:40: error: implicit declaration of function 'strcspn'
arch/arm/kernel/leds.c:40: warning: incompatible implicit declaration of built-in function 'strcspn'
arch/arm/kernel/leds.c:45: error: implicit declaration of function 'strncmp'
arch/arm/kernel/leds.c:55: error: implicit declaration of function 'strlen'
arch/arm/kernel/leds.c:55: warning: incompatible implicit declaration of built-in function 'strlen'
arch/arm/mach-omap2/clockdomain.c:52: error: implicit declaration of function 'strcmp'

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-31 19:30:45 -04:00
Arnd Bergmann
034ee29912 Merge branch 'depends/omap2_dss' into next/cleanup
Omap cleanups conflicted with omap2_dss work in a nontrivial
way, this is the most logical fixup.

Conflicts:
	arch/arm/mach-omap2/board-2430sdp.c
	arch/arm/mach-omap2/board-4430sdp.c
	arch/arm/mach-omap2/board-apollon.c
	arch/arm/mach-omap2/board-h4.c
	arch/arm/mach-omap2/board-ldp.c
	arch/arm/mach-omap2/board-rx51.c

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2011-10-31 23:17:39 +01:00
Benoit Cousson
f718e2c034 ARM: OMAP2+: devices: Remove all omap_device_pm_latency structures
Remove all these duplicated structures since a default one is now
available.

Signed-off-by: Benoit Cousson <b-cousson@ti.com>
Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-10-04 09:52:23 -07:00
Tomi Valkeinen
dc35835c6f OMAP: DSS2: Implement dsi_mux_pads for OMAP4
Implement dsi_mux_pads for OMAP4. On enable the function enables the DSI
pins and disables pull down. On disable the function disables the pins
and enables pull down.

It is unclear from the TRM whether the pull down is active if the pins
are disabled, so this implementation may leave the pins floating when
the DSI device is disabled.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-09-30 16:16:17 +03:00
Tomi Valkeinen
5bc416cba1 OMAP: DSS2: DSI: Improve dsi_mux_pads parameters
dsi_mux_pads() needs to know about the DSI HW module and the DSI lanes
used. Split the function into two, enable and disable, which take
necessary arguments, and add empty implementations for both.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-09-30 16:16:17 +03:00
Tomi Valkeinen
7c68dd96d5 OMAP: DSS2: Change DSI device naming
Currently, there are 2 differently named platform devices generated for
the 2 DSS DSI modules. In order to use the same driver, the dsi devices
should be 2 instances of the same platform device.

Change the platform device names from "omapdss_dsi1" and "omapdss_dsi2"
to omapdss_dsi", and set the device indices to 0 and 1.

Signed-off-by: Archit Taneja <archit@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-09-30 16:16:05 +03:00
Kevin Hilman
3528c58eb9 OMAP: omap_device: when building return platform_device instead of omap_device
All of the device init and device driver interaction with omap_device
is done using platform_device pointers.  To make this more explicit,
have omap_device return a platform_device pointer instead of an
omap_device pointer.

All current users of the omap_device pointer were only using it to get
at the platform_device pointer or struct device pointer, so fixing all
of the users was trivial.

This also makes it more difficult for device init code to directly
access members of struct omap_device, and allows for easier changing
of omap_device internals.

Cc: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-09-15 16:35:46 -07:00
Tomi Valkeinen
6d9f29dd62 OMAP: DSS2: Remove unused code from display.c
oh_core variable is no longer used, so it and its initialization can be
removed.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-07-25 10:22:06 +03:00
Tomi Valkeinen
aea4eb9590 OMAP: DSS2: Remove unused opt_clock_available
opt_clock_available() is no longer needed, so remove it.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-07-25 10:22:05 +03:00
Tomi Valkeinen
700dee78dc OMAP: DSS2: Use omap_pm_get_dev_context_loss_count to get ctx loss count
Initialize get_context_loss_count in the DSS board data to
omap_pm_get_dev_context_loss_count, so that omapdss driver can use it.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-07-25 10:08:15 +03:00
Tomi Valkeinen
aac927c93b OMAP: DSS2: rewrite use of context_loss_count
The function to get device's context loss count has changed from

omap_pm_get_last_off_on_transaction_id() to
omap_pm_get_dev_context_loss_count()

Change name of the function pointer in omapdss.h accordingly, and use
the term "context loss count" instead of "context id" in the code.

Restructure the context loss count functions to handle errors properly,
and ensure that context is always considered lost if an error happens.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-07-25 10:08:15 +03:00
Archit Taneja
179e045369 OMAP2PLUS: DSS2: Clean up omap_display_init()
Currently, omap_display_init() maintains arrays for hwmod name(oh_name) and the
correspnding platform_device name(dev_name) needed by omap_device_build().
A variable oh_count keeps a track of the number of devices to build from oh_name
based on what omap revision it is.

Clean this up by maintaining an array of omap_dss_hwmod_data struct which is
defined for each omap revision as suggested by Tomi Valkeinen. Assign the
corresponding omap_dss_hwmod_data array struct to the pointer curr_dss_hwmod in
omap_display_init().

Signed-off-by: Archit Taneja <archit@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-05-11 14:20:11 +03:00
Tomi Valkeinen
a0b38cc4d3 OMAP: DSS2: Move display.h to include/video/
arch/arm/plat-omap/include/plat/display.h is an include for the OMAP DSS
driver. A more logical place for it is in include/video.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-05-11 14:05:07 +03:00
Semwal, Sumit
fd4b34f607 OMAP2PLUS:DSS2: add opt_clock_available in pdata
Provide a function in pdata to allow dss submodules to check if a given
clock is available on a platform as an optional clock.

Signed-off-by: Senthilvadivu Guruswamy <svadivu@ti.com>
(based on implementation from Senthil)

Signed-off-by: Sumit Semwal <sumit.semwal@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-03-11 15:46:26 +02:00
Mayuresh Janorkar
545376e734 OMAP4: DSS2: Add hwmod device names for OMAP4.
Add hwmod device names for OMAP4; this enables device build for omap4 dss
hwmod IPs.

Signed-off-by: Sumit Semwal <sumit.semwal@ti.com>
Signed-off-by: Mayuresh Janorkar <mayur@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-03-11 15:46:23 +02:00
Senthilvadivu Guruswamy
cf07f53162 OMAP2,3: DSS2: Build omap_device for each DSS HWIP
Looks up the hwmod database for each of the given DSS HW IP and builds
omap_device which inturn does the platform device register for each of DSS HW IP

Signed-off-by: Senthilvadivu Guruswamy <svadivu@ti.com>
Signed-off-by: Sumit Semwal <sumit.semwal@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-03-11 15:46:19 +02:00
Sumit Semwal
b7ee79abcc OMAP2, 3: DSS2: Create new file display.c for central dss driver registration.
A new file display.c is introduced for display driver init, which adds a function
omap_display_init to do the DSS driver registration. This is the first step in moving
away registration of DSS from board files into a common place.

Reviewed-by: Kevin Hilman <khilman@ti.com>
Tested-by: Kevin Hilman <khilman@ti.com>
Signed-off-by: Senthilvadivu Guruswamy <svadivu@ti.com>
Signed-off-by: Sumit Semwal <sumit.semwal@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-02-23 09:33:27 +02:00