beware, does change the ABI as proximity_on_chip_ambient_infrared_supression
is changed to proximity_on_chip_ambient_infrared_suppression
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
just drop execute permission
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the new triggered buffer setup helper function to allocate and register
buffer and pollfunc.
Also as part of the conversion drop scan_timestamp being enabled by default,
since it is a left over of an earlier cleanup.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the new triggered buffer setup helper function to allocate and register
buffer and pollfunc.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the new triggered buffer setup helper function to allocate and register
buffer and pollfunc.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the new triggered buffer setup helper function to allocate and register
buffer and pollfunc.
Also as part of the conversion drop scan_timestamp being enabled by default,
since it is a left over of an earlier cleanup.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the new triggered buffer setup helper function to allocate and register
buffer and pollfunc.
Also as part of the conversion drop scan_timestamp being enabled by default,
since it is a left over of an earlier cleanup.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the new triggered buffer setup helper function to allocate and register
buffer and pollfunc.
The previous code was not passing the temperature channel to iio_buffer_register
since the temperature channel can not be used in buffered mode. With the new
helper functions it is not possible to do this, instead the scan index for the
temperature channel is set to -1 which will cause iio_buffer_register to ignore
the channel. (Also While we are at it also assign the symbolic constant instead
of the raw value to the channel address for the temperature channel).
Also as part of the conversion drop scan_timestamp being enabled by default,
since it is a left over of an earlier cleanup.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the new triggered buffer setup helper function to allocate and register
buffer and pollfunc.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the new triggered buffer setup helper function to allocate and register
buffer and pollfunc.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a helper function for executing the common tasks which are usually involved
in setting up a simple software ringbuffer. It will allocate the buffer,
allocate the pollfunc and register the buffer.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It is not always the case that all channels can be used in buffered mode. This
patch allows channels, which can not be used in buffered mode, to set their scan
index to a negative number, which will cause iio_buffer_register to ignore the
channel.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The below patch fixes a typo found while reading through staging/slicoss
Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes some typos that was found while reading through staging/serqt_usb2
Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replace pr_* calls with dev_* ones when the device structure is available.
Signed-off-by: Miguel Gómez <magomez@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add include files with function definitions to avoid sparse warnings.
Signed-off-by: Miguel Gómez <magomez@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
XGIFAIL() prints a message and returns a value, but it's used only in one
place. Better remove it and replace the call with the macro content.
Signed-off-by: Miguel Gómez <magomez@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Define real content of dumpVGAReg() only in debug mode. Remove old condition.
Signed-off-by: Miguel Gómez <magomez@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove DEBUGPRN() macro which is defined as empty.
Signed-off-by: Miguel Gómez <magomez@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The 'io_bits' variable in the comedi_subdevice struct is a bitmask of
the input/output configuration of the the subdevice. It should be an
unsigned int to correctly represent this.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess: <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The comedi_subdevice 'insn_bits' functions return the number of data
elements used to perform the command. Most of the insn_bits functions
return an open coded '2' to indicate this. The same value is available
as 'insn->n'. Return that instead to better indicate what the return
means.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The comedi core does the sanity check to make sure that the data length
the INSN_BITS instruction is 2. There is no need for the drivers to do
this check. Remove all the sanity checks in the drivers.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Change the usbduxsigma driver to use the new attach_usb() hook in struct
comedi_driver to auto-configure probed USB devices after the firmware is
loaded.
Move the release of the driver's static 'start_stop_sem' semaphore in
usbduxsigma_attach() to occur a bit later for convenience, otherwise the
new usbduxsigma_attach_common() would need to be split in two. I don't
think the slight delay in releasing the semaphore matters too much; it's
only used in the USB probe and disconnect functions and when attaching
and detaching comedi devices.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Change the vmv80xx driver to use the new attach_usb() hook in struct
comedi_driver to auto-configure probed USB devices after the firmware is
loaded.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Change the usbduxfast driver to use the new attach_usb() hook in struct
comedi_driver to auto-configure probed USB devices after the firmware is
loaded.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A previous set of patches by Ravishankar Karkala Mallikarjunayya
replaced a load of printk() calls with dev_info(), dev_err(), etc.
Unfortunately, these used the 'struct device *hw_dev' member of 'struct
comedi_device') as the first parameter of these dev_...() calls, but
that pointer is usually NULL, so the kernel log messages come out a bit
wrong (they contain the phrase "(NULL device *)").
Use the 'struct device *class_dev' member of 'struct comedi_device'
instead for these dev_...() calls. It will be non-NULL and somewhat
meaningful to users. It's also consistent with those comedi drivers
that already use the class_dev member in their dev_...() calls.
Some of the messages included the format "comedi%d" with the minor
device number used for the "%d". This is now redundant as it will be
the same as the dev_name() part of the kernel log message produced by
the dev_...() calls.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A local static variable was declared as a pointer to a string
constant. We're assigning to the underlying memory, so it
needs to be an array instead.
Signed-off-by: Christopher Brannon <chris@the-brannons.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The depends on PCCARD is redundant. All of the comedi PCMCIA
drivers depend on PCMCIA which can only be enabled if PCCARD
is enabled. Remove the extra depends check.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Tested-by: Ian Abbott <abbotti@mev.co.uk>
Reported-by: Randy Dunlap <rdunlap@xenotime.net>
Acked-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
iio_scan_mask_match() returns NULL if the passed in scan mask is empty. This
will happen if no channel has been selected and buffer is enabled.
iio_sw_buffer_preenable() will assign NULL to indio_dev->active_scan_mask in
this case. As a result iio_update_demux() will cause a NULL pointer deref,
because it expects active_scan_mask to be non-NULL.
Since it does not make much sense to start data capture if there is no data to
capture this patch updates the code to fail gracefully in iio_scan_mask_match()
instead of crashing the kernel.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
IIO_ALTVOLTAGE is used by frequency/adf4350 and frequency/ad9523
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
None of these drivers ever schedule any work, so there is no need to flush any
scheduled work when the driver is removed.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The ADIS163xx variants use a different register address for the auxiliary ADC
channel than the ADIS16400. This patch fixes them to use the correct address.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The channel spec for ADUS16334's temperature channel uses the address and scan
index for the Z-axis acceleration channel. This patch fixes it to use the
temperature channel address and scan index instead.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The ADIS16300 uses the same address for the temperature register as the
ADIS16350 and not the same as the ADIS16400.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In the current driver ROLL_OUT register address is the same as the PITCH_OUT
register address. This patch fixes it to use the correct address.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Removed the following sparse warning:
In function 'adis16080_read_raw':
warning: 'ut' may be used uninitialized in this function
Signed-off-by: Leed Aguilar <leed.aguilar@ti.com>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Cc: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The PDEBUG macro is used to output a bunch of debug messages in the
driver. These messages might be useful when first creating the driver
but they shouldn't be in mainline. Remove it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>