renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-25 05:34:00 +08:00
Code
915,347 Commits 41 Branches 2 Tags 3.4 GiB
b87080eab4
Commit Graph

21128 Commits

Author SHA1 Message Date
Tyler Hicks
b87080eab4 selftests/ipc: Fix test failure seen after initial test run 
After successfully running the IPC msgque test once, subsequent runs
result in a test failure:

  $ sudo ./run_kselftest.sh
  TAP version 13
  1..1
  # selftests: ipc: msgque
  # Failed to get stats for IPC queue with id 0
  # Failed to dump queue: -22
  # Bail out!
  # # Pass 0 Fail 0 Xfail 0 Xpass 0 Skip 0 Error 0
  not ok 1 selftests: ipc: msgque # exit=1

The dump_queue() function loops through the possible message queue index
values using calls to msgctl(kern_id, MSG_STAT, ...) where kern_id
represents the index value. The first time the test is ran, the initial
index value of 0 is valid and the test is able to complete. The index
value of 0 is not valid in subsequent test runs and the loop attempts to
try index values of 1, 2, 3, and so on until a valid index value is
found that corresponds to the message queue created earlier in the test.

The msgctl() syscall returns -1 and sets errno to EINVAL when invalid
index values are used. The test failure is caused by incorrectly
comparing errno to -EINVAL when cycling through possible index values.

Fix invalid test failures on subsequent runs of the msgque test by
correctly comparing errno values to a non-negated EINVAL.

Fixes: 3a665531a3 ("selftests: IPC message queue copy feature test")
Signed-off-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
 2020-04-14 10:24:28 -06:00
Jarkko Sakkinen
aaa2d92efe Revert "Kernel selftests: tpm2: check for tpm support" 
This reverts commit b32694cd07.

The original comment was neither reviewed nor tested. Thus, this the
*only* possible action to take.

Cc: Nikita Sobolev <Nikita.Sobolev@synopsys.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
 2020-04-14 10:08:24 -06:00
Xiao Yang
cdfe56d901 selftests/ftrace: Add CONFIG_SAMPLE_FTRACE_DIRECT=m kconfig 
ftrace-direct.tc and kprobe-direct.tc require CONFIG_SAMPLE_FTRACE_DIRECT=m
so add it to config file which is used by merge_config.sh.

Signed-off-by: Xiao Yang <yangx.jy@cn.fujitsu.com>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
 2020-04-14 10:00:29 -06:00
Thadeu Lima de Souza Cascardo
d42b8dbec4 selftests/seccomp: allow clock_nanosleep instead of nanosleep 
glibc 2.31 calls clock_nanosleep when its nanosleep function is used. So
the restart_syscall fails after that. In order to deal with it, we trace
clock_nanosleep and nanosleep. Then we check for either.

This works just fine on systems with both glibc 2.30 and glibc 2.31,
whereas it failed before on a system with glibc 2.31.

Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
 2020-04-14 09:49:51 -06:00
Andrea Righi
651e0d8814 kselftest/runner: allow to properly deliver signals to tests 
While running seccomp_bpf, kill_after_ptrace() gets stuck if we run it
via /usr/bin/timeout (that is the default), until the timeout expires.

This is because /usr/bin/timeout is preventing to properly deliver
signals to ptrace'd children (SIGSYS in this case).

This problem can be easily reproduced by running:

 $ sudo make TARGETS=seccomp kselftest
 ...

 # [ RUN      ] TRACE_syscall.skip_a#
 not ok 1 selftests: seccomp: seccomp_bpf # TIMEOUT

The test is hanging at this point until the timeout expires and then it
reports the timeout error.

Prevent this problem by passing --foreground to /usr/bin/timeout,
allowing to properly deliver signals to children processes.

Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
 2020-04-14 09:49:13 -06:00
Colin Ian King
d925c89695 selftests/harness: fix spelling mistake "SIGARLM" -> "SIGALRM" 
There a few identical spelling mistakes, fix these.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
 2020-04-14 09:44:04 -06:00
Shuah Khan
ffa773e101 selftests: Fix memfd test run-time regression 
Commit d3fd949abd ("selftests: Fix memfd to support relocatable
build (O=objdir)") introduced regression run-time regression with
a change to include programs that should be run from shell scripts
to list of programs that run as independent tests. This fix restores
the original designation.

Fixes: d3fd949abd ("selftests: Fix memfd to support relocatable build (O=objdir)")
Reported-by: kernel test robot <rong.a.chen@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
 2020-04-13 09:33:46 -06:00
Sandipan Das
963e3e9c9a selftests: vm: Fix 64-bit test builds for powerpc64le 
Some tests are built only for 64-bit systems. This makes
sure that these tests are built for both big and little
endian variants of powerpc64.

Fixes: 7549b33642 ("selftests: vm: Build/Run 64bit tests only on 64bit arch")
Reviewed-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Signed-off-by: Sandipan Das <sandipan@linux.ibm.com>
Tested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
 2020-04-13 09:33:46 -06:00
Sandipan Das
24c3f063c5 selftests: vm: Do not override definition of ARCH 
Independent builds of the vm selftests is currently broken because
commit 7549b33642 ("selftests: vm: Build/Run 64bit tests only on
64bit arch") overrides the value of ARCH with the machine name from
uname. This does not always match the architecture names used for
tasks like header installation.

E.g. for building tests on powerpc64, we need ARCH=powerpc
and not ARCH=ppc64 or ARCH=ppc64le. Otherwise, the build
fails as shown below.

  $ uname -m
  ppc64le

  $ make -C tools/testing/selftests/vm
  make: Entering directory '/home/sandipan/linux/tools/testing/selftests/vm'
  make --no-builtin-rules ARCH=ppc64le -C ../../../.. headers_install
  make[1]: Entering directory '/home/sandipan/linux'
  Makefile:653: arch/ppc64le/Makefile: No such file or directory
  make[1]: *** No rule to make target 'arch/ppc64le/Makefile'.  Stop.
  make[1]: Leaving directory '/home/sandipan/linux'
  ../lib.mk:50: recipe for target 'khdr' failed
  make: *** [khdr] Error 2
  make: Leaving directory '/home/sandipan/linux/tools/testing/selftests/vm'

Fixes: 7549b33642 ("selftests: vm: Build/Run 64bit tests only on 64bit arch")
Signed-off-by: Sandipan Das <sandipan@linux.ibm.com>
Tested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
 2020-04-13 09:33:46 -06:00
Linus Torvalds
b753101a4a Kbuild updates for v5.7 (2nd) 
- raise minimum supported binutils version to 2.23
 
  - remove old CONFIG_AS_* macros that we know binutils >= 2.23 supports
 
  - move remaining CONFIG_AS_* tests to Kconfig from Makefile
 
  - enable -Wtautological-compare warnings to catch more issues
 
  - do not support GCC plugins for GCC <= 4.7
 
  - fix various breakages of 'make xconfig'
 
  - include the linker version used for linking the kernel into
    LINUX_COMPILER, which is used for the banner, and also exposed to
    /proc/version
 
  - link lib-y objects to vmlinux forcibly when CONFIG_MODULES=y,
    which allows us to remove the lib-ksyms.o workaround, and to
    solve the last known issue of the LLVM linker
 
  - add dummy tools in scripts/dummy-tools/ to enable all compiler
    tests in Kconfig, which will be useful for distro maintainers
 
  - support the single switch, LLVM=1 to use Clang and all LLVM utilities
    instead of GCC and Binutils.
 
  - support LLVM_IAS=1 to enable the integrated assembler, which is still
    experimental
 -----BEGIN PGP SIGNATURE-----
 
 iQJJBAABCgAzFiEEbmPs18K1szRHjPqEPYsBB53g2wYFAl6RNqEVHG1hc2FoaXJv
 eUBrZXJuZWwub3JnAAoJED2LAQed4NsGZPEP/3affmzIWJuKGF1RErOHK3KCe/uX
 PmLjoRZ7im7V+J4b3W+p+re6BOXIXhW+rtKoP/Ijuys9g80WeeAb2nB4h0ESOtff
 3NgN97v28mh4tVtbluJambFDXItei+UwDp1sgg2sZ7ehaSBVny9hgNmPRn5YcyoS
 O3Juy85q70l8awBWThjEHgSxEw2Rzh9PLE6YmMt40rHTxVEDjMOPSuBlp/+TWj3X
 ugF/wInp+J5mCAKCwJI4L6PavdwIwf9hg3Cv/DpoOw60TxwH+7Rq6RueDKBgHhe3
 UEPHrXyPCsF/JQwwSFxN7k481RV2PjkXFwA3U5vH+3WIRb4ETX0+fmBIrLPSAX4z
 6rZiEvdrGS4TVvW2i8mrkJUrLPHNyQ90q/FU0V18A1k77Cv7mWJjSebTAVYNvz/v
 f/DxApaepwprdtHcNYJMN/TVnwxNexJK+U+bkuXsmDggvZYCxwLQUjtI3Sab1Rv9
 C6Y8WgqKx8yP6NbqVtUMkwXdEhBiHgybVxkl9hseUEbhUElIViuq5rlrHa0FVt2Q
 w4orgFXOd7k5iuDr7ka+wa3p20KLQQuB+vwLaCpi35+4vepQ7P0i2tFNwSclo7lO
 +iNy4Bq20W0/cmQeUJIzctJGibwro1I3HPN1UJ7gp0fZ2WVGzV0SKpwQ0tLOVuuU
 y9yPsL1ciDpKQKMh
 =jpyF
 -----END PGP SIGNATURE-----

Merge tag 'kbuild-v5.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull more Kbuild updates from Masahiro Yamada:

 - raise minimum supported binutils version to 2.23

 - remove old CONFIG_AS_* macros that we know binutils >= 2.23 supports

 - move remaining CONFIG_AS_* tests to Kconfig from Makefile

 - enable -Wtautological-compare warnings to catch more issues

 - do not support GCC plugins for GCC <= 4.7

 - fix various breakages of 'make xconfig'

 - include the linker version used for linking the kernel into
   LINUX_COMPILER, which is used for the banner, and also exposed to
   /proc/version

 - link lib-y objects to vmlinux forcibly when CONFIG_MODULES=y, which
   allows us to remove the lib-ksyms.o workaround, and to solve the last
   known issue of the LLVM linker

 - add dummy tools in scripts/dummy-tools/ to enable all compiler tests
   in Kconfig, which will be useful for distro maintainers

 - support the single switch, LLVM=1 to use Clang and all LLVM utilities
   instead of GCC and Binutils.

 - support LLVM_IAS=1 to enable the integrated assembler, which is still
   experimental

* tag 'kbuild-v5.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (36 commits)
  kbuild: fix comment about missing include guard detection
  kbuild: support LLVM=1 to switch the default tools to Clang/LLVM
  kbuild: replace AS=clang with LLVM_IAS=1
  kbuild: add dummy toolchains to enable all cc-option etc. in Kconfig
  kbuild: link lib-y objects to vmlinux forcibly when CONFIG_MODULES=y
  MIPS: fw: arc: add __weak to prom_meminit and prom_free_prom_memory
  kbuild: remove -I$(srctree)/tools/include from scripts/Makefile
  kbuild: do not pass $(KBUILD_CFLAGS) to scripts/mkcompile_h
  Documentation/llvm: fix the name of llvm-size
  kbuild: mkcompile_h: Include $LD version in /proc/version
  kconfig: qconf: Fix a few alignment issues
  kconfig: qconf: remove some old bogus TODOs
  kconfig: qconf: fix support for the split view mode
  kconfig: qconf: fix the content of the main widget
  kconfig: qconf: Change title for the item window
  kconfig: qconf: clean deprecated warnings
  gcc-plugins: drop support for GCC <= 4.7
  kbuild: Enable -Wtautological-compare
  x86: update AS_* macros to binutils >=2.23, supporting ADX and AVX2
  crypto: x86 - clean up poly1305-x86_64-cryptogams.S by 'make clean'
  ...
 2020-04-11 09:46:12 -07:00
Pali Rohár
149ed3d404 change email address for Pali Rohár 
For security reasons I stopped using gmail account and kernel address is
now up-to-date alias to my personal address.

People periodically send me emails to address which they found in source
code of drivers, so this change reflects state where people can contact
me.

[ Added .mailmap entry as per Joe Perches  - Linus ]
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Joe Perches <joe@perches.com>
Link: http://lkml.kernel.org/r/20200307104237.8199-1-pali@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2020-04-10 15:36:22 -07:00
Eric Biggers
23756e551f selftests: kmod: test disabling module autoloading 
Test that request_module() fails with -ENOENT when
/proc/sys/kernel/modprobe contains (a) a nonexistent path, and (b) an
empty path.

Case (b) is a regression test for the patch "kmod: make request_module()
return an error when autoloading is disabled".

Tested with 'kmod.sh -t 0010 && kmod.sh -t 0011', and also simply with
'kmod.sh' to run all kmod tests.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jeff Vander Stoep <jeffv@google.com>
Cc: Jessica Yu <jeyu@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: NeilBrown <neilb@suse.com>
Link: http://lkml.kernel.org/r/20200312202552.241885-5-ebiggers@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2020-04-10 15:36:22 -07:00
Eric Biggers
6d573a0752 selftests: kmod: fix handling test numbers above 9 
get_test_count() and get_test_enabled() were broken for test numbers
above 9 due to awk interpreting a field specification like '$0010' as
octal rather than decimal.  Fix it by stripping the leading zeroes.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jeff Vander Stoep <jeffv@google.com>
Cc: Jessica Yu <jeyu@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: NeilBrown <neilb@suse.com>
Link: http://lkml.kernel.org/r/20200318230515.171692-5-ebiggers@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2020-04-10 15:36:22 -07:00
Linus Torvalds
e4da01d833 powerpc updates for 5.7 #2 
- A fix for a crash in machine check handling on pseries (ie. guests)
 
  - A small series to make it possible to disable CONFIG_COMPAT, and turn it off
    by default for ppc64le where it's not used.
 
  - A few other miscellaneous fixes and small improvements.
 
 Thanks to:
   Alexey Kardashevskiy, Anju T Sudhakar, Arnd Bergmann, Christophe Leroy, Dan
   Carpenter, Ganesh Goudar, Geert Uytterhoeven, Geoff Levand, Mahesh Salgaonkar,
   Markus Elfring, Michal Suchanek, Nicholas Piggin, Stephen Boyd, Wen Xiong.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCAAxFiEEJFGtCPCthwEv2Y/bUevqPMjhpYAFAl6O8LgTHG1wZUBlbGxl
 cm1hbi5pZC5hdQAKCRBR6+o8yOGlgMcYEACbGf+Z9brLSasYajoqU6QdqGPacHEN
 1a9TEmUnN+HWgtfkkoEBFbyuYHnhyhYuf7hvNccDjDA91ESVylO+Wq7Q+v/xoz29
 LVyb3V6uuVMLHnoqwP5jpr0lS0aOpuu3Nc2SpfBuolDtJqeMxpVEEK3Ln3uATlq6
 SnEAxQEKb2x4Y4Tfuq5A3txupj0s/UYrmeR6GAdkN3Oapbb9uQl8Ql2smqrZo0cq
 6TLxtoFzbfXkV6NmY2V0OKMTeXt0fhrvdDhFEBckCUpRZLv4Fd7CwPWNER2bUVs6
 04kg87BAO8qRyfr3G93oP0mWgi65kpXI8yN6Vt5Lig+5PnxNh7swvEqDpQR1s9se
 uVoeN7RBHOKQppZRkpzf6yZbelCcMuwTeIBQ9XOx/jYFAHJ2nUkJm9TYgKckVvNY
 E4shiM1eoOVMrEmODFBCUmUkJLyn5jU1+r5mn708v2Nb5E1XgoTejitB6bHyL+Aa
 zo/0DdsZO86iNE7th94oHQRgVbx1vtP9kV6vK6BLB5M95RSGEdVAEMo5CTL70wr+
 hz7suOaijPi+TeCW9YPrcOHcHOQE9pzTFQoVZHuv8egbvd9Rni3aBAMMqHx/lQdE
 Hk4zN7IytOLqQTfINNYgoo0kUKI1ipJQOBfR5jyeLhgg6yp36CnO/m+0QGvrILbi
 18tlf2qkD75Z3g==
 =72sb
 -----END PGP SIGNATURE-----

Merge tag 'powerpc-5.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

Pull more powerpc updates from Michael Ellerman:
 "The bulk of this is the series to make CONFIG_COMPAT user-selectable,
  it's been around for a long time but was blocked behind the
  syscall-in-C series.

  Plus there's also a few fixes and other minor things.

  Summary:

   - A fix for a crash in machine check handling on pseries (ie. guests)

   - A small series to make it possible to disable CONFIG_COMPAT, and
     turn it off by default for ppc64le where it's not used.

   - A few other miscellaneous fixes and small improvements.

  Thanks to: Alexey Kardashevskiy, Anju T Sudhakar, Arnd Bergmann,
  Christophe Leroy, Dan Carpenter, Ganesh Goudar, Geert Uytterhoeven,
  Geoff Levand, Mahesh Salgaonkar, Markus Elfring, Michal Suchanek,
  Nicholas Piggin, Stephen Boyd, Wen Xiong"

* tag 'powerpc-5.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  selftests/powerpc: Always build the tm-poison test 64-bit
  powerpc: Improve ppc_save_regs()
  Revert "powerpc/64: irq_work avoid interrupt when called with hardware irqs enabled"
  powerpc/time: Replace <linux/clk-provider.h> by <linux/of_clk.h>
  powerpc/pseries/ddw: Extend upper limit for huge DMA window for persistent memory
  powerpc/perf: split callchain.c by bitness
  powerpc/64: Make COMPAT user-selectable disabled on littleendian by default.
  powerpc/64: make buildable without CONFIG_COMPAT
  powerpc/perf: consolidate valid_user_sp -> invalid_user_sp
  powerpc/perf: consolidate read_user_stack_32
  powerpc: move common register copy functions from signal_32.c to signal.c
  powerpc: Add back __ARCH_WANT_SYS_LLSEEK macro
  powerpc/ps3: Set CONFIG_UEVENT_HELPER=y in ps3_defconfig
  powerpc/ps3: Remove an unneeded NULL check
  powerpc/ps3: Remove duplicate error message
  powerpc/powernv: Re-enable imc trace-mode in kernel
  powerpc/perf: Implement a global lock to avoid races between trace, core and thread imc events.
  powerpc/pseries: Fix MCE handling on pseries
  selftests/eeh: Skip ahci adapters
  powerpc/64s: Fix doorbell wakeup msgclr optimisation
 2020-04-09 11:01:42 -07:00
Linus Torvalds
9b06860d7c libnvdimm for 5.7 
- Add support for region alignment configuration and enforcement to
   fix compatibility across architectures and PowerPC page size
   configurations.
 
 - Introduce 'zero_page_range' as a dax operation. This facilitates
   filesystem-dax operation without a block-device.
 
 - Introduce phys_to_target_node() to facilitate drivers that want to
   know resulting numa node if a given reserved address range was
   onlined.
 
 - Advertise a persistence-domain for of_pmem and papr_scm. The
   persistence domain indicates where cpu-store cycles need to reach in
   the platform-memory subsystem before the platform will consider them
   power-fail protected.
 
 - Promote numa_map_to_online_node() to a cross-kernel generic facility.
 
 - Save x86 numa information to allow for node-id lookups for reserved
   memory ranges, deploy that capability for the e820-pmem driver.
 
 - Pick up some miscellaneous minor fixes, that missed v5.6-final,
   including a some smatch reports in the ioctl path and some unit test
   compilation fixups.
 
 - Fixup some flexible-array declarations.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEf41QbsdZzFdA8EfZHtKRamZ9iAIFAl6LtIAACgkQHtKRamZ9
 iAIwRA/8CLVVuQpgHQ1tqK4h8CZPrISFXh7wy7uhocEU2xrDh6iGVnLztmoLRr2k
 5f8T9lRzreSAwIVL5DbGqP1pFncqIt9VMnKsFlaPMBGCBNR+hURY0iBCNjIT+jiq
 BOzLd52MR2rqJxeXGTMUbWrBrbmuj4mZPdmGVuFFe7GFRpoaVpCgOo+296eWa/ot
 gIOFUTonZY7STYjNvDok0TXCmiCFuJb+P+y5ldfCPShHvZhTiaF53jircja8vAjO
 G5dt8ixBKUK0rXRc4SEQsQhAZNcAFHb6Gy5lg4C2QzhTF374xTc9usJZNWbIE9iM
 5mipBYvjVuoY+XaCNZDkaRcJIy/jqB15O6l3QIWbZLGaK9m95YPp9LmkPFwd3JpO
 e3rO24ML471DxqB9iWIiJCNcBBocLOlnd6qAQTpppWDpGNbudwXvfsmKHmKIScSE
 x+IDCdscLmmm+WG2dLmLraWOVPu42xZFccoQCi4M3TTqfeB9pZ9XckFQ37zX62zG
 5t+7Ek+t1W4QVt/JQYVKH03XT15sqUpVknvx0Hl4Y5TtbDOkFLkO8RN0/HyExDef
 7iegS35kqTsM4EfZQ+9juKbI2JBAjHANcbj0V4dogqaRj6vr3akumBzUtuYqAofv
 qU3s9skmLsEemOJC+ns2PT8vl5dyIoeDfH0r2XvGWxYqolMqJpA=
 =sY4N
 -----END PGP SIGNATURE-----

Merge tag 'libnvdimm-for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm

Pull libnvdimm and dax updates from Dan Williams:
 "There were multiple touches outside of drivers/nvdimm/ this round to
  add cross arch compatibility to the devm_memremap_pages() interface,
  enhance numa information for persistent memory ranges, and add a
  zero_page_range() dax operation.

  This cycle I switched from the patchwork api to Konstantin's b4 script
  for collecting tags (from x86, PowerPC, filesystem, and device-mapper
  folks), and everything looks to have gone ok there. This has all
  appeared in -next with no reported issues.

  Summary:

   - Add support for region alignment configuration and enforcement to
     fix compatibility across architectures and PowerPC page size
     configurations.

   - Introduce 'zero_page_range' as a dax operation. This facilitates
     filesystem-dax operation without a block-device.

   - Introduce phys_to_target_node() to facilitate drivers that want to
     know resulting numa node if a given reserved address range was
     onlined.

   - Advertise a persistence-domain for of_pmem and papr_scm. The
     persistence domain indicates where cpu-store cycles need to reach
     in the platform-memory subsystem before the platform will consider
     them power-fail protected.

   - Promote numa_map_to_online_node() to a cross-kernel generic
     facility.

   - Save x86 numa information to allow for node-id lookups for reserved
     memory ranges, deploy that capability for the e820-pmem driver.

   - Pick up some miscellaneous minor fixes, that missed v5.6-final,
     including a some smatch reports in the ioctl path and some unit
     test compilation fixups.

   - Fixup some flexible-array declarations"

* tag 'libnvdimm-for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (29 commits)
  dax: Move mandatory ->zero_page_range() check in alloc_dax()
  dax,iomap: Add helper dax_iomap_zero() to zero a range
  dax: Use new dax zero page method for zeroing a page
  dm,dax: Add dax zero_page_range operation
  s390,dcssblk,dax: Add dax zero_page_range operation to dcssblk driver
  dax, pmem: Add a dax operation zero_page_range
  pmem: Add functions for reading/writing page to/from pmem
  libnvdimm: Update persistence domain value for of_pmem and papr_scm device
  tools/test/nvdimm: Fix out of tree build
  libnvdimm/region: Fix build error
  libnvdimm/region: Replace zero-length array with flexible-array member
  libnvdimm/label: Replace zero-length array with flexible-array member
  ACPI: NFIT: Replace zero-length array with flexible-array member
  libnvdimm/region: Introduce an 'align' attribute
  libnvdimm/region: Introduce NDD_LABELING
  libnvdimm/namespace: Enforce memremap_compat_align()
  libnvdimm/pfn: Prevent raw mode fallback if pfn-infoblock valid
  libnvdimm: Out of bounds read in __nd_ioctl()
  acpi/nfit: improve bounds checking for 'func'
  mm/memremap_pages: Introduce memremap_compat_align()
  ...
 2020-04-08 21:03:40 -07:00
Masahiro Yamada
a0d1c951ef kbuild: support LLVM=1 to switch the default tools to Clang/LLVM 
As Documentation/kbuild/llvm.rst implies, building the kernel with a
full set of LLVM tools gets very verbose and unwieldy.

Provide a single switch LLVM=1 to use Clang and LLVM tools instead
of GCC and Binutils. You can pass it from the command line or as an
environment variable.

Please note LLVM=1 does not turn on the integrated assembler. You need
to pass LLVM_IAS=1 to use it. When the upstream kernel is ready for the
integrated assembler, I think we can make it default.

We discussed what we need, and we agreed to go with a simple boolean
flag that switches both target and host tools:

  https://lkml.org/lkml/2020/3/28/494
  https://lkml.org/lkml/2020/4/3/43

Some items discussed, but not adopted:

- LLVM_DIR

  When multiple versions of LLVM are installed, I just thought supporting
  LLVM_DIR=/path/to/my/llvm/bin/ might be useful.

  CC      = $(LLVM_DIR)clang
  LD      = $(LLVM_DIR)ld.lld
    ...

  However, we can handle this by modifying PATH. So, we decided to not do
  this.

- LLVM_SUFFIX

  Some distributions (e.g. Debian) package specific versions of LLVM with
  naming conventions that use the version as a suffix.

  CC      = clang$(LLVM_SUFFIX)
  LD      = ld.lld(LLVM_SUFFIX)
    ...

  will allow a user to pass LLVM_SUFFIX=-11 to use clang-11 etc.,
  but the suffixed versions in /usr/bin/ are symlinks to binaries in
  /usr/lib/llvm-#/bin/, so this can also be handled by PATH.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Tested-by: Nathan Chancellor <natechancellor@gmail.com> # build
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
 2020-04-09 03:18:21 +09:00
Linus Torvalds
9bb715260e virtio: fixes, vdpa 
Some bug fixes.
 The new vdpa subsystem with two first drivers.
 
 Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 
 iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAl6MS7wPHG1zdEByZWRo
 YXQuY29tAAoJECgfDbjSjVRpGp8H/2H49Gya1cfVbGU13qgmBSQqQXC8hS3iNLuG
 ltRgU+jafJT//kvkdm3/DUzfK3eRUWUfqZLKEbAQDtMY0OGHi/KGEBYVLDde7Zxt
 Lg4VnwBhkYDR/f01ZZDbHxzj9JAr83i28nILjLIqf3a1BX4zf203+ZE0/JM8a7wL
 dOPoH7NAfyz5ul2F67bR1IOF8vC6TidpavzR2+HC/MocHYXb6Bgfvt+i4EcrfuMf
 9lnBfajgklKr9sNJniwvvR1pWVg+YyG3VeC6T8tIC/xzbCmIoNT+5b3q2XPSIHq1
 EuQTeXH9CBFXS0qcFlq2ktR1xd1Lx95hKwZpqLwLFDmfgjhV2QU=
 =/84P
 -----END PGP SIGNATURE-----

Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost

Pull virtio updates from Michael Tsirkin:

 - Some bug fixes

 - The new vdpa subsystem with two first drivers

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
  virtio-balloon: Revert "virtio-balloon: Switch back to OOM handler for VIRTIO_BALLOON_F_DEFLATE_ON_OOM"
  vdpa: move to drivers/vdpa
  virtio: Intel IFC VF driver for VDPA
  vdpasim: vDPA device simulator
  vhost: introduce vDPA-based backend
  virtio: introduce a vDPA based transport
  vDPA: introduce vDPA bus
  vringh: IOTLB support
  vhost: factor out IOTLB
  vhost: allow per device message handler
  vhost: refine vhost and vringh kconfig
  virtio-balloon: Switch back to OOM handler for VIRTIO_BALLOON_F_DEFLATE_ON_OOM
  virtio-net: Introduce hash report feature
  virtio-net: Introduce RSS receive steering feature
  virtio-net: Introduce extended RSC feature
  tools/virtio: option to build an out of tree module
 2020-04-08 10:51:53 -07:00
Linus Torvalds
34183ddd13 - Convert tsens configuration DT binding to yaml (Rajeshwari) 
- Add interrupt support on the rcar sensor (Niklas Söderlund)
 
 - Add a new Spreadtrum thermal driver (Baolin Wang)
 
 - Add thermal binding for the fsl scu board, a new API to retrieve the
   sensor id bound to the thermal zone and i.MX system controller
   sensor (Anson Huang))
 
 - Remove warning log when a deferred probe is requested on Exynos
   (Marek Szyprowski)
 
 - Add the thermal monitoring unit support for imx8mm with its DT
   bindings (Anson Huang)
 
 - Rephrase the Kconfig text for clarity (Linus Walleij)
 
 - Use the gpio descriptor for the ti-soc-thermal (Linus Walleij)
 
 - Align msg structure to 4 bytes for i.MX SC, fix the Kconfig
   dependency, add the __may_be unused annotation for PM functions and
   the COMPILE_TEST option for imx8mm (Anson Huang)
 
 - Fix a dependency on regmap in Kconfig for qoriq (Yuantian Tang)
 
 - Add DT binding and support for the rcar gen3 r8a77961 and improve
   the error path on the rcar init function (Niklas Söderlund)
 
 - Cleanup and improvements for the tsens Qcom sensor (Amit Kucheria)
 
 - Improve code by removing lock and caching values in the rcar thermal
   sensor (Niklas Söderlund)
 
 - Cleanup in the qoriq drivers and add a call to
   imx_thermal_unregister_legacy_cooling in the removal function (Anson
   Huang)
 
 - Remove redundant 'maxItems' in tsens and sprd DT bindings (Rob Herring)
 
 - Change the thermal DT bindings by making the cooling-maps optional
   (Yuantian Tang)
 
 - Add Tiger Lake support (Sumeet Pawnikar)
 
 - Use scnprintf() for avoiding potential buffer overflow (Takashi Iwai)
 
 - Make pkg_temp_lock a raw_spinlock_t(Clark Williams)
 
 - Fix incorrect data types by changing them to signed on i.MX SC (Anson Huang)
 
 - Replace zero-length array with flexible-array member (Gustavo A. R. Silva)
 
 - Add support for i.MX8MP in the driver and in the DT bindings (Anson Huang)
 
 - Fix return value of the cpufreq_set_cur_state() function (Willy Wolff)
 
 - Remove abusing and scary WARN_ON in the cpufreq cooling device
   (Daniel Lezcano)
 
 - Fix build warning of incorrect argument type reported by sparse on
   imx8mm (Anson Huang)
 
 - Fix stub for the devfreq cooling device (Martin Blumenstingl)
 
 - Fix cpu idle cooling documentation (Sergey Vidishev)
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCAAdFiEEGn3N4YVz0WNVyHskqDIjiipP6E8FAl6MXkEACgkQqDIjiipP
 6E+BIggAh52YBU8D8GthsvCPTgka95+wAIaZtx4Y7UnhvshHhM2w+m97TQOXK373
 95mwO9mwQuAoksSmLo7pBQYJ7HItQ26Yoq9akpOL6EiT+BEWiqoHJgl+afVVtoKa
 n67d3Pa6coup1+PQNIA8kpTIOmUQTP8THtwpZ3HlChWsg22NTd0QUGpGJ1TtBD/q
 KqMdQjxahFJ4RTYsnECWBkw3EMkczMNMgdrXEvm4rMkcaJzv9g2ZPqerOShK/RzP
 8sejWczt6jaRwu4hLpd/lLikTSHZoXMFJ8ylAiQXFELCPAQIrMS/ae+dTGJ4qP7x
 hkjsewPbeA1Z+al/IBVHiCtOzKkICQ==
 =XDYl
 -----END PGP SIGNATURE-----

Merge tag 'thermal-v5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux

Pull thermal updates from Daniel Lezcano:

 - Convert tsens configuration DT binding to yaml (Rajeshwari)

 - Add interrupt support on the rcar sensor (Niklas Söderlund)

 - Add a new Spreadtrum thermal driver (Baolin Wang)

 - Add thermal binding for the fsl scu board, a new API to retrieve the
   sensor id bound to the thermal zone and i.MX system controller sensor
   (Anson Huang))

 - Remove warning log when a deferred probe is requested on Exynos
   (Marek Szyprowski)

 - Add the thermal monitoring unit support for imx8mm with its DT
   bindings (Anson Huang)

 - Rephrase the Kconfig text for clarity (Linus Walleij)

 - Use the gpio descriptor for the ti-soc-thermal (Linus Walleij)

 - Align msg structure to 4 bytes for i.MX SC, fix the Kconfig
   dependency, add the __may_be unused annotation for PM functions and
   the COMPILE_TEST option for imx8mm (Anson Huang)

 - Fix a dependency on regmap in Kconfig for qoriq (Yuantian Tang)

 - Add DT binding and support for the rcar gen3 r8a77961 and improve the
   error path on the rcar init function (Niklas Söderlund)

 - Cleanup and improvements for the tsens Qcom sensor (Amit Kucheria)

 - Improve code by removing lock and caching values in the rcar thermal
   sensor (Niklas Söderlund)

 - Cleanup in the qoriq drivers and add a call to
   imx_thermal_unregister_legacy_cooling in the removal function (Anson
   Huang)

 - Remove redundant 'maxItems' in tsens and sprd DT bindings (Rob
   Herring)

 - Change the thermal DT bindings by making the cooling-maps optional
   (Yuantian Tang)

 - Add Tiger Lake support (Sumeet Pawnikar)

 - Use scnprintf() for avoiding potential buffer overflow (Takashi Iwai)

 - Make pkg_temp_lock a raw_spinlock_t(Clark Williams)

 - Fix incorrect data types by changing them to signed on i.MX SC (Anson
   Huang)

 - Replace zero-length array with flexible-array member (Gustavo A. R.
   Silva)

 - Add support for i.MX8MP in the driver and in the DT bindings (Anson
   Huang)

 - Fix return value of the cpufreq_set_cur_state() function (Willy
   Wolff)

 - Remove abusing and scary WARN_ON in the cpufreq cooling device
   (Daniel Lezcano)

 - Fix build warning of incorrect argument type reported by sparse on
   imx8mm (Anson Huang)

 - Fix stub for the devfreq cooling device (Martin Blumenstingl)

 - Fix cpu idle cooling documentation (Sergey Vidishev)

* tag 'thermal-v5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (52 commits)
  Documentation: cpu-idle-cooling: Fix diagram for 33% duty cycle
  thermal: devfreq_cooling: inline all stubs for CONFIG_DEVFREQ_THERMAL=n
  thermal: imx8mm: Fix build warning of incorrect argument type
  thermal/drivers/cpufreq_cooling: Remove abusing WARN_ON
  thermal/drivers/cpufreq_cooling: Fix return of cpufreq_set_cur_state
  thermal: imx8mm: Add i.MX8MP support
  dt-bindings: thermal: imx8mm-thermal: Add support for i.MX8MP
  thermal: qcom: tsens.h: Replace zero-length array with flexible-array member
  thermal: imx_sc_thermal: Fix incorrect data type
  thermal: int340x_thermal: Use scnprintf() for avoiding potential buffer overflow
  thermal: int340x: processor_thermal: Add Tiger Lake support
  thermal/x86_pkg_temp: Make pkg_temp_lock a raw_spinlock_t
  dt-bindings: thermal: make cooling-maps property optional
  dt-bindings: thermal: qcom-tsens: Remove redundant 'maxItems'
  dt-bindings: thermal: sprd: Remove redundant 'maxItems'
  thermal: imx: Calling imx_thermal_unregister_legacy_cooling() in .remove
  thermal: qoriq: Sort includes alphabetically
  thermal: qoriq: Use devm_add_action_or_reset() to handle all cleanups
  thermal: rcar_thermal: Remove lock in rcar_thermal_get_current_temp()
  thermal: rcar_thermal: Do not store ctemp in rcar_thermal_priv
  ...
 2020-04-07 20:00:16 -07:00
Roman Penyaev
282144e04b kselftest: introduce new epoll test case 
This testcase repeats epollbug.c from the bug:

  https://bugzilla.kernel.org/show_bug.cgi?id=205933

What it tests?  It tests the race between epoll_ctl() and epoll_wait().
New event mask passed to epoll_ctl() triggers wake up, which can be missed
because of the bug described in the link.  Reproduction is 100%, so easy
to fix.  Kudos, Max, for wonderful test case.

Signed-off-by: Roman Penyaev <rpenyaev@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Max Neunhoeffer <max@arangodb.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Christopher Kohlhoff <chris.kohlhoff@clearpool.io>
Cc: Davidlohr Bueso <dbueso@suse.de>
Cc: Jason Baron <jbaron@akamai.com>
Cc: Jes Sorensen <jes.sorensen@gmail.com>
Link: http://lkml.kernel.org/r/20200214170211.561524-2-rpenyaev@suse.de
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2020-04-07 10:43:44 -07:00
chenqiwu
8d994cada2 lib/rbtree: fix coding style of assignments 
Leave blank space between the right-hand and left-hand side of the
assignment to meet the kernel coding style better.

Signed-off-by: chenqiwu <chenqiwu@xiaomi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Michel Lespinasse <walken@google.com>
Link: http://lkml.kernel.org/r/1582621140-25850-1-git-send-email-qiwuchen55@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2020-04-07 10:43:43 -07:00
Peter Xu
9b12488a77 userfaultfd: selftests: add write-protect test 
Add uffd tests for write protection.

Instead of introducing new tests for it, let's simply squashing uffd-wp
tests into existing uffd-missing test cases.  Changes are:

(1) Bouncing tests

  We do the write-protection in two ways during the bouncing test:

  - By using UFFDIO_COPY_MODE_WP when resolving MISSING pages: then
    we'll make sure for each bounce process every single page will be
    at least fault twice: once for MISSING, once for WP.

  - By direct call UFFDIO_WRITEPROTECT on existing faulted memories:
    To further torture the explicit page protection procedures of
    uffd-wp, we split each bounce procedure into two halves (in the
    background thread): the first half will be MISSING+WP for each
    page as explained above.  After the first half, we write protect
    the faulted region in the background thread to make sure at least
    half of the pages will be write protected again which is the first
    half to test the new UFFDIO_WRITEPROTECT call.  Then we continue
    with the 2nd half, which will contain both MISSING and WP faulting
    tests for the 2nd half and WP-only faults from the 1st half.

(2) Event/Signal test

  Mostly previous tests but will do MISSING+WP for each page.  For
  sigbus-mode test we'll need to provide standalone path to handle the
  write protection faults.

For all tests, do statistics as well for uffd-wp pages.

Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Bobby Powers <bobbypowers@gmail.com>
Cc: Brian Geffon <bgeffon@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Denis Plotnikov <dplotnikov@virtuozzo.com>
Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Martin Cracauer <cracauer@cons.org>
Cc: Marty McFadden <mcfadden8@llnl.gov>
Cc: Maya Gokhale <gokhale2@llnl.gov>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Shaohua Li <shli@fb.com>
Link: http://lkml.kernel.org/r/20200220163112.11409-20-peterx@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2020-04-07 10:43:40 -07:00
Peter Xu
5c8aed6c1b userfaultfd: selftests: refactor statistics 
Introduce uffd_stats structure for statistics of the self test, at the
same time refactor the code to always pass in the uffd_stats for either
read() or poll() typed fault handling threads instead of using two
different ways to return the statistic results.  No functional change.

With the new structure, it's very easy to introduce new statistics.

Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Bobby Powers <bobbypowers@gmail.com>
Cc: Brian Geffon <bgeffon@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Denis Plotnikov <dplotnikov@virtuozzo.com>
Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Martin Cracauer <cracauer@cons.org>
Cc: Marty McFadden <mcfadden8@llnl.gov>
Cc: Maya Gokhale <gokhale2@llnl.gov>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Shaohua Li <shli@fb.com>
Link: http://lkml.kernel.org/r/20200220163112.11409-19-peterx@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2020-04-07 10:43:40 -07:00
Linus Torvalds
c48b07226b perf updates all over the place: 
core:
 
    - Support for cgroup tracking in samples to allow cgroup based
      analysis
 
  tools:
 
    - Support for cgroup analysis
 
    - Commandline option and hotkey for perf top to change the sort order
 
    - A set of fixes all over the place
 
    - Various build system related improvements
 
    - Updates of the X86 pmu event JSON data
 
    - Documentation updates
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAl6J2iATHHRnbHhAbGlu
 dXRyb25peC5kZQAKCRCmGPVMDXSYoXMEEACy6WaNabX7EzkLUnX0WCgxnZVSryNR
 4EnxLJSg5lChEe4q2mOS3mRMpzlXHQieWcFxlwda7kjIbFlgQvjJQUiYlAvxRRO/
 giY/GwCtTi/Flcb+7wKxTgMYmtAUOZDWeQbBZUlFLi9vyeCHVkjget9EyVsgbe/W
 EmRsrPuKOVMUTeEwm3zpIE051DObpiWLNge++My70q5W/yNsS94PbNydgKO7osqk
 pX37YVyBFpI2IQxMGzaE3yK7OxXRjYljZaz1tONFDMEYOX9gmxpDsCCflsP1ZOzL
 4/P4faRvAOElwxtYBelKmRl8eboqhRpTEK0Et0TI0LYbUZrE2nisDi0LTKPWQb0k
 Om2Qi6AfZs67PVzx9htlx6rfee72+sUluz5BDKOGH0pNJ8CFy70ns8InLsZqbBZ7
 SgFVNjx6bHxB58VuVE9WEzr/KVs6zI/SuJlH7WG7FLXbm5j0cETfCjg40JlDpSNh
 CZs+Epky1zyytrVJ9Gc7KnRlw8VB2eWEQ2cQ0sqj5w7WxhfrnsCmQf1zk4sofhOF
 iz3Dvb9Llz/pYWGZbEiQAuI+8bo0psJptidzpmpbIXs/woKDhW49w1FxqowJQMWe
 +lGWcauSfo3gjgEnTkOWAx3yiH4i9rvRChX8Jh0Z07d6Kwf19YYfxcuhlkx0Wutj
 eKaaErWDtWAxpA==
 =2UUD
 -----END PGP SIGNATURE-----

Merge tag 'perf-urgent-2020-04-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull more perf updates from Thomas Gleixner:
 "Perf updates all over the place:

  core:

   - Support for cgroup tracking in samples to allow cgroup based
     analysis

  tools:

   - Support for cgroup analysis

   - Commandline option and hotkey for perf top to change the sort order

   - A set of fixes all over the place

   - Various build system related improvements

   - Updates of the X86 pmu event JSON data

   - Documentation updates"

* tag 'perf-urgent-2020-04-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (55 commits)
  perf python: Fix clang detection to strip out options passed in $CC
  perf tools: Support Python 3.8+ in Makefile
  perf script: Fix invalid read of directory entry after closedir()
  perf script report: Fix SEGFAULT when using DWARF mode
  perf script: add -S/--symbols documentation
  perf pmu-events x86: Use CPU_CLK_UNHALTED.THREAD in Kernel_Utilization metric
  perf events parser: Add missing Intel CPU events to parser
  perf script: Allow --symbol to accept hexadecimal addresses
  perf report/top TUI: Fix title line formatting
  perf top: Support hotkey to change sort order
  perf top: Support --group-sort-idx to change the sort order
  perf symbols: Fix arm64 gap between kernel start and module end
  perf build-test: Honour JOBS to override detection of number of cores
  perf script: Add --show-cgroup-events option
  perf top: Add --all-cgroups option
  perf record: Add --all-cgroups option
  perf record: Support synthesizing cgroup events
  perf report: Add 'cgroup' sort key
  perf cgroup: Maintain cgroup hierarchy
  perf tools: Basic support for CGROUP event
  ...
 2020-04-05 12:26:24 -07:00
Linus Torvalds
d38c07afc3 powerpc updates for 5.7 
- A large series from Nick for 64-bit to further rework our exception vectors,
    and rewrite portions of the syscall entry/exit and interrupt return in C. The
    result is much easier to follow code that is also faster in general.
 
  - Cleanup of our ptrace code to split various parts out that had become badly
    intertwined with #ifdefs over the years.
 
  - Changes to our NUMA setup under the PowerVM hypervisor which should
    hopefully avoid non-sensical topologies which can lead to warnings from the
    workqueue code and other problems.
 
  - MAINTAINERS updates to remove some of our old orphan entries and update the
    status of others.
 
  - Quite a few other small changes and fixes all over the map.
 
 Thanks to:
   Abdul Haleem, afzal mohammed, Alexey Kardashevskiy, Andrew Donnellan, Aneesh
   Kumar K.V, Balamuruhan S, Cédric Le Goater, Chen Zhou, Christophe JAILLET,
   Christophe Leroy, Christoph Hellwig, Clement Courbet, Daniel Axtens, David
   Gibson, Douglas Miller, Fabiano Rosas, Fangrui Song, Ganesh Goudar, Gautham R.
   Shenoy, Greg Kroah-Hartman, Greg Kurz, Gustavo Luiz Duarte, Hari Bathini, Ilie
   Halip, Jan Kara, Joe Lawrence, Joe Perches, Kajol Jain, Larry Finger,
   Laurentiu Tudor, Leonardo Bras, Libor Pechacek, Madhavan Srinivasan, Mahesh
   Salgaonkar, Masahiro Yamada, Masami Hiramatsu, Mauricio Faria de Oliveira,
   Michael Neuling, Michal Suchanek, Mike Rapoport, Nageswara R Sastry, Nathan
   Chancellor, Nathan Lynch, Naveen N. Rao, Nicholas Piggin, Nick Desaulniers,
   Oliver O'Halloran, Po-Hsu Lin, Pratik Rajesh Sampat, Rasmus Villemoes, Ravi
   Bangoria, Roman Bolshakov, Sam Bobroff, Sandipan Das, Santosh S, Sedat Dilek,
   Segher Boessenkool, Shilpasri G Bhat, Sourabh Jain, Srikar Dronamraju, Stephen
   Rothwell, Tyrel Datwyler, Vaibhav Jain, YueHaibing.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCAAxFiEEJFGtCPCthwEv2Y/bUevqPMjhpYAFAl6JypATHG1wZUBlbGxl
 cm1hbi5pZC5hdQAKCRBR6+o8yOGlgOTyD/0U90tXb3VXlQcc4OFIb8vWIj76k4Zn
 ZSZ7RyOuvb5pCISBZjSK79XkR9eMHT77qagX4V41q64k4yQl8nbgLeVnwL76hLLc
 IJCs23f4nsO0uqX/MhSCc5dfOOOS2i8V+OQYtsYWsH5QaG95v0cHIqVaHHMlfQxu
 507GO/W5W6KTd4x008b5unQOuE51zMKlKvqEJXkT59obQFpaa2S5Wn7OzhsnarCH
 YSRNxaC7vtgBKLA9wUnFh8UUbh0FbOwXBCaq4OhHMhgRihdteVBCzlcR/6c+IRbt
 EoZxKzfQ0hI1z5f++kJNaRXMtUbSpM8D1HdKKHgiWjpdBSD0eu2X106KQT2R2ZOF
 qhX8xPLWNzdBglA6L43AaZUu+4ayd3QrrJIkjDv/K1rCHZjfGOzSQfoZgTEBNLFA
 tC0crhEfw8m98e4EwhCtekGQxdczRdLS9YvtC/h6mU2xkpA35yNSwB1/iuVQdkYD
 XyrEqImAQ1PJla7NL0hxSy5ZxrBtMeKT4WZZ0BNgKXryemldg8Tuv3AEyach3BHz
 eU0pIwpbnPm1JAPyrpDQ1yEf7QsD77gTPfEvilEci60R9DhvIMGAY+pt0qfME3yX
 wOLp2yVBEXlRmvHk/y/+r+m4aCsmwSrikbWwmLLwAAA6JehtzFOWxTEfNpACP23V
 mZyyZznsHIIE3Q==
 =ARdm
 -----END PGP SIGNATURE-----

Merge tag 'powerpc-5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

Pull powerpc updates from Michael Ellerman:
 "Slightly late as I had to rebase mid-week to insert a bug fix:

   - A large series from Nick for 64-bit to further rework our exception
     vectors, and rewrite portions of the syscall entry/exit and
     interrupt return in C. The result is much easier to follow code
     that is also faster in general.

   - Cleanup of our ptrace code to split various parts out that had
     become badly intertwined with #ifdefs over the years.

   - Changes to our NUMA setup under the PowerVM hypervisor which should
     hopefully avoid non-sensical topologies which can lead to warnings
     from the workqueue code and other problems.

   - MAINTAINERS updates to remove some of our old orphan entries and
     update the status of others.

   - Quite a few other small changes and fixes all over the map.

  Thanks to: Abdul Haleem, afzal mohammed, Alexey Kardashevskiy, Andrew
  Donnellan, Aneesh Kumar K.V, Balamuruhan S, Cédric Le Goater, Chen
  Zhou, Christophe JAILLET, Christophe Leroy, Christoph Hellwig, Clement
  Courbet, Daniel Axtens, David Gibson, Douglas Miller, Fabiano Rosas,
  Fangrui Song, Ganesh Goudar, Gautham R. Shenoy, Greg Kroah-Hartman,
  Greg Kurz, Gustavo Luiz Duarte, Hari Bathini, Ilie Halip, Jan Kara,
  Joe Lawrence, Joe Perches, Kajol Jain, Larry Finger, Laurentiu Tudor,
  Leonardo Bras, Libor Pechacek, Madhavan Srinivasan, Mahesh Salgaonkar,
  Masahiro Yamada, Masami Hiramatsu, Mauricio Faria de Oliveira, Michael
  Neuling, Michal Suchanek, Mike Rapoport, Nageswara R Sastry, Nathan
  Chancellor, Nathan Lynch, Naveen N. Rao, Nicholas Piggin, Nick
  Desaulniers, Oliver O'Halloran, Po-Hsu Lin, Pratik Rajesh Sampat,
  Rasmus Villemoes, Ravi Bangoria, Roman Bolshakov, Sam Bobroff,
  Sandipan Das, Santosh S, Sedat Dilek, Segher Boessenkool, Shilpasri G
  Bhat, Sourabh Jain, Srikar Dronamraju, Stephen Rothwell, Tyrel
  Datwyler, Vaibhav Jain, YueHaibing"

* tag 'powerpc-5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (158 commits)
  powerpc: Make setjmp/longjmp signature standard
  powerpc/cputable: Remove unnecessary copy of cpu_spec->oprofile_type
  powerpc: Suppress .eh_frame generation
  powerpc: Drop -fno-dwarf2-cfi-asm
  powerpc/32: drop unused ISA_DMA_THRESHOLD
  powerpc/powernv: Add documentation for the opal sensor_groups sysfs interfaces
  selftests/powerpc: Fix try-run when source tree is not writable
  powerpc/vmlinux.lds: Explicitly retain .gnu.hash
  powerpc/ptrace: move ptrace_triggered() into hw_breakpoint.c
  powerpc/ptrace: create ppc_gethwdinfo()
  powerpc/ptrace: create ptrace_get_debugreg()
  powerpc/ptrace: split out ADV_DEBUG_REGS related functions.
  powerpc/ptrace: move register viewing functions out of ptrace.c
  powerpc/ptrace: split out TRANSACTIONAL_MEM related functions.
  powerpc/ptrace: split out SPE related functions.
  powerpc/ptrace: split out ALTIVEC related functions.
  powerpc/ptrace: split out VSX related functions.
  powerpc/ptrace: drop PARAMETER_SAVE_AREA_OFFSET
  powerpc/ptrace: drop unnecessary #ifdefs CONFIG_PPC64
  powerpc/ptrace: remove unused header includes
  ...
 2020-04-05 11:12:59 -07:00
Linus Torvalds
aa1a8ce533 New tracing features: 
- The ring buffer is no longer disabled when reading the trace file.
    The trace_pipe file was made to be used for live tracing and reading
    as it acted like the normal producer/consumer. As the trace file
    would not consume the data, the easy way of handling it was to just
    disable writes to the ring buffer. This came to a surprise to the
    BPF folks who complained about lost events due to reading.
    This is no longer an issue. If someone wants to keep the old disabling
    there's a new option "pause-on-trace" that can be set.
 
  - New set_ftrace_notrace_pid file. PIDs in this file will not be traced
    by the function tracer. Similar to set_ftrace_pid, which makes the
    function tracer only trace those tasks with PIDs in the file, the
    set_ftrace_notrace_pid does the reverse.
 
  - New set_event_notrace_pid file. PIDs in this file will cause events
    not to be traced if triggered by a task with a matching PID.
    Similar to the set_event_pid file but will not be traced.
    Note, sched_waking and sched_switch events may still be trace if
    one of the tasks referenced by those events contains a PID that
    is allowed to be traced.
 
 Tracing related features:
 
  - New bootconfig option, that is attached to the initrd file.
    If bootconfig is on the command line, then the initrd file
    is searched looking for a bootconfig appended at the end.
 
  - New GPU tracepoint infrastructure to help the gfx drivers to get
    off debugfs (acked by Greg Kroah-Hartman)
 
 Other minor updates and fixes.
 -----BEGIN PGP SIGNATURE-----
 
 iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCXokgWRQccm9zdGVkdEBn
 b29kbWlzLm9yZwAKCRAp5XQQmuv6qgrHAP0UkKs/52JY4oWa3OIh/OqK+vnCrIwz
 zGvDFOYM0fKbwgD9FZWgzlcaYK5m2Cxlhp4VoraZveHMLJUhnEHtdX6X0wk=
 =Rebj
 -----END PGP SIGNATURE-----

Merge tag 'trace-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

Pull tracing updates from Steven Rostedt:
 "New tracing features:

   - The ring buffer is no longer disabled when reading the trace file.

     The trace_pipe file was made to be used for live tracing and
     reading as it acted like the normal producer/consumer. As the trace
     file would not consume the data, the easy way of handling it was to
     just disable writes to the ring buffer.

     This came to a surprise to the BPF folks who complained about lost
     events due to reading. This is no longer an issue. If someone wants
     to keep the old disabling there's a new option "pause-on-trace"
     that can be set.

   - New set_ftrace_notrace_pid file. PIDs in this file will not be
     traced by the function tracer.

     Similar to set_ftrace_pid, which makes the function tracer only
     trace those tasks with PIDs in the file, the set_ftrace_notrace_pid
     does the reverse.

   - New set_event_notrace_pid file. PIDs in this file will cause events
     not to be traced if triggered by a task with a matching PID.

     Similar to the set_event_pid file but will not be traced. Note,
     sched_waking and sched_switch events may still be traced if one of
     the tasks referenced by those events contains a PID that is allowed
     to be traced.

  Tracing related features:

   - New bootconfig option, that is attached to the initrd file.

     If bootconfig is on the command line, then the initrd file is
     searched looking for a bootconfig appended at the end.

   - New GPU tracepoint infrastructure to help the gfx drivers to get
     off debugfs (acked by Greg Kroah-Hartman)

  And other minor updates and fixes"

* tag 'trace-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (27 commits)
  tracing: Do not allocate buffer in trace_find_next_entry() in atomic
  tracing: Add documentation on set_ftrace_notrace_pid and set_event_notrace_pid
  selftests/ftrace: Add test to test new set_event_notrace_pid file
  selftests/ftrace: Add test to test new set_ftrace_notrace_pid file
  tracing: Create set_event_notrace_pid to not trace tasks
  ftrace: Create set_ftrace_notrace_pid to not trace tasks
  ftrace: Make function trace pid filtering a bit more exact
  ftrace/kprobe: Show the maxactive number on kprobe_events
  tracing: Have the document reflect that the trace file keeps tracing enabled
  ring-buffer/tracing: Have iterator acknowledge dropped events
  tracing: Do not disable tracing when reading the trace file
  ring-buffer: Do not disable recording when there is an iterator
  ring-buffer: Make resize disable per cpu buffer instead of total buffer
  ring-buffer: Optimize rb_iter_head_event()
  ring-buffer: Do not die if rb_iter_peek() fails more than thrice
  ring-buffer: Have rb_iter_head_event() handle concurrent writer
  ring-buffer: Add page_stamp to iterator for synchronization
  ring-buffer: Rename ring_buffer_read() to read_buffer_iter_advance()
  ring-buffer: Have ring_buffer_empty() not depend on tracing stopped
  tracing: Save off entry when peeking at next entry
  ...
 2020-04-05 10:36:18 -07:00
Linus Torvalds
828907ef25 This is the bulk of GPIO development for the v5.7 kernel cycle. 
Core and userspace API:
 
 - The userspace API KFIFOs have been imoproved with locks that
   do not block interrupts. This makes us better at getting
   events to userspace without blocking or disturbing new events
   arriving in the same time. This was reviewed by the KFIFO
   maintainer Stefani. This is a generic improvement which
   paves the road for similar improvements in other subsystems.
 
 - We provide a new ioctl() for monitoring changes in the line
   information, such as when multiple clients are taking lines
   and giving them back, possibly reconfiguring them in the
   process: we can now monitor that and not get stuck with stale
   static information.
 
 - An example tool 'gpio-watch' is provided to showcase this
   functionality.
 
 - Timestamps for events are switched to ktime_get_ns() which is
   monotonic. We previously had a 'realtime' stamp which could
   move forward and *backward* in time, which probably would just
   cause silent bugs and weird behaviour. In the long run we
   see two relevant timestamps: ktime_get_ns() or the timestamp
   sometimes provided by the GPIO hardware itself, if that
   exists.
 
 - Device Tree overlay support for GPIO hogs. On systems that
   load overlays, these overlays can now contain hogs, and will
   then be respected.
 
 - Handle pin control interaction with nonexisting pin ranges
   in the GPIO library core instead of in the individual
   drivers.
 
 New drivers:
 
 - New driver for the Mellanox BlueField 2 GPIO controller.
 
 Driver improvements:
 
 - Introduce the BGPIOF_NO_SET_ON_INPUT flag to the generic
   MMIO GPIO library and use this flag in the MT7621 driver.
 
 - Texas Instruments OMAP CPU power management improvements,
   such as blocking of idle on pending GPIO interrupts.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEElDRnuGcz/wPCXQWMQRCzN7AZXXMFAl6IWUAACgkQQRCzN7AZ
 XXPReQ//WUHALqbLOL/DZR8kVyygVZXV8JC4jcuMQgX+Mvm1DQuGp1T8VPlG1wC7
 vy5eTz3oPc+jAaHGQgGiSGdPRQtDkAW5+Wo4hzcHJ5ATlzT7cgNywK3Jk6+YlPlF
 CuhHB6aPEymQ45/GseUwEb5AuWWKS03P3XdOBj2IdDhuRHRfyjHi+31s0lh6bfNs
 kC2eP+VtddVqLbOdPE1GKjZi+Iq9ffFRmiNTduHbl3o6ZoE6WnMvn2wsC6zPpJr4
 AM8zpj9JFUq1DYaQf8bJJLTm8lItcyyUUhq8oKUxBpecjWfhUYwEYHGxqWIk9fbM
 oyJ3zBlU0G7bc4gu1VG3cTacUf//BTmQG3iZNSSw9w17I1hOMX9wNJan22VkEbJD
 8X+6AcgkldNwnAVWcVgg1lkfgdxlWURMYXl1uQPQZSj2SQL6gFcdkAhKwlgl8jOi
 RctUfZ69tD+4ul2b+MhL6BtIk16o2RIBJF53ESxrR4qftRZ3ywW4JQ/AwNoQalxM
 Xg8U3axFm8kitOzemVoXGr/AIee9KpcA4NK8yQLEPmSFgBaVzaVlP9Q7Klr7QGXg
 RvK45uRULrWnvSyoVY7Ox+ie1NiG8JAbaxKBxkV8n+z+gVMh82xcyQX+5SgWxwW0
 dzeEx1B0mCW4WDAK29CcdQVE6m4K2u/fabhZq5IhgS1mQoTC894=
 =EFm/
 -----END PGP SIGNATURE-----

Merge tag 'gpio-v5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

Pull GPIO updates from Linus Walleij:
 "This is the bulk of GPIO development for the v5.7 kernel cycle.

  Core and userspace API:

   - The userspace API KFIFOs have been imoproved with locks that do not
     block interrupts. This makes us better at getting events to
     userspace without blocking or disturbing new events arriving in the
     same time. This was reviewed by the KFIFO maintainer Stefani. This
     is a generic improvement which paves the road for similar
     improvements in other subsystems.

   - We provide a new ioctl() for monitoring changes in the line
     information, such as when multiple clients are taking lines and
     giving them back, possibly reconfiguring them in the process: we
     can now monitor that and not get stuck with stale static
     information.

   - An example tool 'gpio-watch' is provided to showcase this
     functionality.

   - Timestamps for events are switched to ktime_get_ns() which is
     monotonic. We previously had a 'realtime' stamp which could move
     forward and *backward* in time, which probably would just cause
     silent bugs and weird behaviour. In the long run we see two
     relevant timestamps: ktime_get_ns() or the timestamp sometimes
     provided by the GPIO hardware itself, if that exists.

   - Device Tree overlay support for GPIO hogs. On systems that load
     overlays, these overlays can now contain hogs, and will then be
     respected.

   - Handle pin control interaction with nonexisting pin ranges in the
     GPIO library core instead of in the individual drivers.

  New drivers:

   - New driver for the Mellanox BlueField 2 GPIO controller.

  Driver improvements:

   - Introduce the BGPIOF_NO_SET_ON_INPUT flag to the generic MMIO GPIO
     library and use this flag in the MT7621 driver.

   - Texas Instruments OMAP CPU power management improvements, such as
     blocking of idle on pending GPIO interrupts"

* tag 'gpio-v5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (59 commits)
  Revert "gpio: eic-sprd: Use devm_platform_ioremap_resource()"
  pinctrl: Unconditionally assign .request()/.free()
  gpio: Unconditionally assign .request()/.free()
  gpio: export of_pinctrl_get to modules
  pinctrl: Define of_pinctrl_get() dummy for !PINCTRL
  gpio: Rename variable in core APIs
  gpio: Avoid using pin ranges with !PINCTRL
  gpiolib: Remove unused gpio_chip parameter from gpio_set_bias()
  gpiolib: Pass gpio_desc to gpio_set_config()
  gpiolib: Introduce gpiod_set_config()
  tools: gpio: Fix out-of-tree build regression
  gpio: gpiolib: fix a doc warning
  gpio: tegra186: Add Tegra194 pin ranges for GG.0 and GG.1
  gpio: tegra186: Add support for pin ranges
  gpio: Support GPIO controllers without pin-ranges
  ARM: integrator: impd1: Use GPIO_LOOKUP() helper macro
  gpio: brcmstb: support gpio-line-names property
  tools: gpio: Fix typo in gpio-utils
  tools: gpio-hammer: Apply scripts/Lindent and retain good changes
  gpiolib: gpio_name_to_desc: factor out !name check
  ...
 2020-04-04 10:27:00 -07:00
Linus Torvalds
1e396a5d17 threads-v5.7 
-----BEGIN PGP SIGNATURE-----
 
 iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCXoSOqgAKCRCRxhvAZXjc
 omfTAQDlbSZkzNfEWcxi+WE9tg+Y5tHR7hjdsK99Mb3vhAh5GwD+LT0EOI3WKoNY
 MQUp2RaR7YwWL/pktd9N1EX8qa5IPg4=
 =zvBX
 -----END PGP SIGNATURE-----

Merge tag 'threads-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux

Pull thread updates from Christian Brauner:
 "The main change for this cycle was the extension for clone3() to
  support spawning processes directly into cgroups via CLONE_INTO_CGROUP
  (commit ef2c41cf38: "clone3: allow spawning processes
  into cgroups").

  But since I had to touch kernel/cgroup/ quite a bit I had Tejun route
  that through his tree this time around to make it easier for him to
  handle other changes.

  So here is just the unexciting leftovers: a regression test for the
  ENOMEM regression we fixed in commit b26ebfe12f ("pid: Fix error
  return value in some cases") verifying that we report ENOMEM when
  trying to create a new process in a pid namespace whose init
  process/subreaper has already exited"

* tag 'threads-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
  selftests: add pid namespace ENOMEM regression test
 2020-04-04 10:08:18 -07:00
Michael Ellerman
6ba4a2d359 selftests/powerpc: Always build the tm-poison test 64-bit 
The tm-poison test includes inline asm which is 64-bit only, so the
test must be built 64-bit in order to work.

Otherwise it fails, eg:
  # file tm-poison
  tm-poison: ELF 32-bit MSB executable, PowerPC or cisco 4500, version 1 (SYSV) ...
  # ./tm-poison
  test: tm_poison_test
  Unknown value 0x1fff71150 leaked into f31!
  Unknown value 0x1fff710c0 leaked into vr31!
  failure: tm_poison_test

Fixes: a003365cab ("powerpc/tm: Add tm-poison test")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200403095656.3772005-1-mpe@ellerman.id.au
 2020-04-04 21:41:40 +11:00
Ingo Molnar
7dc41b9b99 perf/urgent fixes and improvements: 
perf python:
 
   Arnaldo Carvalho de Melo:
 
   - Fix clang detection to strip out options passed in $CC.
 
 build:
 
   He Zhe:
 
   - Normalize gcc parameter when generating arch errno table, fixing
     the build by removing options from $(CC).
 
   Sam Lunt:
 
   - Support Python 3.8+ in Makefile.
 
 perf report/top:
 
   Arnaldo Carvalho de Melo:
 
   - Fix title line formatting.
 
 perf script:
 
   Andreas Gerstmayr:
 
   - Fix SEGFAULT when using DWARF mode.
 
   - Fix invalid read of directory entry after closedir(), found with valgrind.
 
   Hagen Paul Pfeifer:
 
   - Introduce --deltatime option.
 
   Stephane Eranian:
 
   - Allow --symbol to accept hexadecimal addresses.
 
   Ian Rogers:
 
   - Add -S/--symbols documentation
 
   Namhyung Kim:
 
   - Add --show-cgroup-events option.
 
 perf python:
 
   Arnaldo Carvalho de Melo:
 
   - Include rwsem.c in the python binding, needed by the cgroups improvements.
 
 build-test:
 
   Arnaldo Carvalho de Melo:
 
   - Honour JOBS to override detection of number of cores
 
 perf top:
 
   Jin Yao:
 
   - Support --group-sort-idx to change the sort order
 
   - perf top: Support hotkey to change sort order
 
 perf pmu-events x86:
 
   Jin Yao:
 
   - Use CPU_CLK_UNHALTED.THREAD in Kernel_Utilization metric
 
 perf symbols arm64:
 
   Kemeng Shi:
 
   - Fix arm64 gap between kernel start and module end
 
 kernel perf subsystem:
 
   Namhyung Kim:
 
   - Add PERF_RECORD_CGROUP event and Add PERF_SAMPLE_CGROUP feature,
     to allow cgroup tracking, saving a link between cgroup path and
     its id number.
 
 perf cgroup:
 
   Namhyung Kim:
 
   - Maintain cgroup hierarchy.
 
 perf report:
 
   Namhyung Kim:
 
   - Add 'cgroup' sort key.
 
 perf record:
 
   Namhyung Kim:
 
   - Support synthesizing cgroup events for pre-existing cgroups.
 
   - Add --all-cgroups option
 
 Documentation:
 
   Tony Jones:
 
   - Update docs regarding kernel/user space unwinding.
 
 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCXodMtwAKCRCyPKLppCJ+
 J+leAP0Ws0dGzMSIwcMVc7zvK1IsYOTlZ8lYXJePxD+Po/YPdAEA6Squf4gwZ2wm
 b9R7w50dlCkMJ9LaueCeZZjh/4asFwQ=
 =auOb
 -----END PGP SIGNATURE-----

Merge tag 'perf-urgent-for-mingo-5.7-20200403' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent

Pull perf/urgent fixes and improvements from Arnaldo Carvalho de Melo:

perf python:

  Arnaldo Carvalho de Melo:

  - Fix clang detection to strip out options passed in $CC.

build:

  He Zhe:

  - Normalize gcc parameter when generating arch errno table, fixing
    the build by removing options from $(CC).

  Sam Lunt:

  - Support Python 3.8+ in Makefile.

perf report/top:

  Arnaldo Carvalho de Melo:

  - Fix title line formatting.

perf script:

  Andreas Gerstmayr:

  - Fix SEGFAULT when using DWARF mode.

  - Fix invalid read of directory entry after closedir(), found with valgrind.

  Hagen Paul Pfeifer:

  - Introduce --deltatime option.

  Stephane Eranian:

  - Allow --symbol to accept hexadecimal addresses.

  Ian Rogers:

  - Add -S/--symbols documentation

  Namhyung Kim:

  - Add --show-cgroup-events option.

perf python:

  Arnaldo Carvalho de Melo:

  - Include rwsem.c in the python binding, needed by the cgroups improvements.

build-test:

  Arnaldo Carvalho de Melo:

  - Honour JOBS to override detection of number of cores

perf top:

  Jin Yao:

  - Support --group-sort-idx to change the sort order

  - perf top: Support hotkey to change sort order

perf pmu-events x86:

  Jin Yao:

  - Use CPU_CLK_UNHALTED.THREAD in Kernel_Utilization metric

perf symbols arm64:

  Kemeng Shi:

  - Fix arm64 gap between kernel start and module end

kernel perf subsystem:

  Namhyung Kim:

  - Add PERF_RECORD_CGROUP event and Add PERF_SAMPLE_CGROUP feature,
    to allow cgroup tracking, saving a link between cgroup path and
    its id number.

perf cgroup:

  Namhyung Kim:

  - Maintain cgroup hierarchy.

perf report:

  Namhyung Kim:

  - Add 'cgroup' sort key.

perf record:

  Namhyung Kim:

  - Support synthesizing cgroup events for pre-existing cgroups.

  - Add --all-cgroups option

Documentation:

  Tony Jones:

  - Update docs regarding kernel/user space unwinding.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
 2020-04-04 10:35:15 +02:00
Linus Torvalds
86f26a77cb pci-v5.7-changes 
-----BEGIN PGP SIGNATURE-----
 
 iQJIBAABCgAyFiEEgMe7l+5h9hnxdsnuWYigwDrT+vwFAl6GTQMUHGJoZWxnYWFz
 QGdvb2dsZS5jb20ACgkQWYigwDrT+vy3PhAAmqpYBRobOsG8QbmKDjoJEFtkqdvD
 z6+4zf/R+hF11RyXjMDwihIe8d+tkQ4eAaYu6Oh5PrTyanz0G0PgeCrivZeytULk
 thqQIWzDQMVA5vN/2/Vy8s5s+3HzP8z/MZOFScJ7+xA1MndXptPRTNmFUbjx+GAv
 x8/pTp0u9AF6m7itX65DxXvwkzjWamt+Ar4Yx2IcuKAU/M5RtfuZO3PpDnqn7/wk
 JFlkRoYeFB6qNnnkPdeyPHl9dALhuhzgdTyklQEnKVW3nf3xThYDhcEwdh6kBQgl
 0dH8lL5LXy7PKGN8RES4wB0Vqndw/HlsCF5O4wkkfItbnbJxGJtS139e5973m0ud
 sgWvF4yJAT2jCKhIeNz34sePQJMyWALhv0XzZCsJ0YeGHsrV1jrHELkwUT1+eIsT
 3UV0iZ6aL06zQJDyKUbbIcQzEQ/wwBC+x9VgsyL54K1quCQZ1N1Nl/dvrb4cRG9m
 m9EhJK/brDf4c0uFlOmMTSxV1t5J+z6ZSQnh1ShD/o5yBsxqN6q5brDT6LEs+jbM
 LsIkA18jJOd4OyiDs98YiFKvIfFQbQ0LEBQpJwhF0snvfBFMMbUYN/T/NYneWON/
 F0TpkFoP7PXDuq55iNaLdnObfzrpC9kdzUyWvePUvjxIl55bkf+/qtUny+H48t4L
 dNggvW052d7BHes=
 =deWu
 -----END PGP SIGNATURE-----

Merge tag 'pci-v5.7-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull pci updates from Bjorn Helgaas:
 "Enumeration:

   - Revert sysfs "rescan" renames that broke apps (Kelsey Skunberg)

   - Add more 32 GT/s link speed decoding and improve the implementation
     (Yicong Yang)

  Resource management:

   - Add support for sizing programmable host bridge apertures and fix a
     related alpha Nautilus regression (Ivan Kokshaysky)

  Interrupts:

   - Add boot interrupt quirk mechanism for Xeon chipsets and document
     boot interrupts (Sean V Kelley)

  PCIe native device hotplug:

   - When possible, disable in-band presence detect and use PDS
     (Alexandru Gagniuc)

   - Add DMI table for devices that don't use in-band presence detection
     but don't advertise that correctly (Stuart Hayes)

   - Fix hang when powering slots up/down via sysfs (Lukas Wunner)

   - Fix an MSI interrupt race (Stuart Hayes)

  Virtualization:

   - Add ACS quirks for Zhaoxin devices (Raymond Pang)

  Error handling:

   - Add Error Disconnect Recover (EDR) support so firmware can report
     devices disconnected via DPC and we can try to recover (Kuppuswamy
     Sathyanarayanan)

  Peer-to-peer DMA:

   - Add Intel Sky Lake-E Root Ports B, C, D to the whitelist (Andrew
     Maier)

  ASPM:

   - Reduce severity of common clock config message (Chris Packham)

   - Clear the correct bits when enabling L1 substates, so we don't go
     to the wrong state (Yicong Yang)

  Endpoint framework:

   - Replace EPF linkup ops with notifier call chain and improve locking
     (Kishon Vijay Abraham I)

   - Fix concurrent memory allocation in OB address region (Kishon Vijay
     Abraham I)

   - Move PF function number assignment to EPC core to support multiple
     function creation methods (Kishon Vijay Abraham I)

   - Fix issue with clearing configfs "start" entry (Kunihiko Hayashi)

   - Fix issue with endpoint MSI-X ignoring BAR Indicator and Table
     Offset (Kishon Vijay Abraham I)

   - Add support for testing DMA transfers (Kishon Vijay Abraham I)

   - Add support for testing > 10 endpoint devices (Kishon Vijay Abraham I)

   - Add support for tests to clear IRQ (Kishon Vijay Abraham I)

   - Add common DT schema for endpoint controllers (Kishon Vijay Abraham I)

  Amlogic Meson PCIe controller driver:

   - Add DT bindings for AXG PCIe PHY, shared MIPI/PCIe analog PHY (Remi
     Pommarel)

   - Add Amlogic AXG PCIe PHY, AXG MIPI/PCIe analog PHY drivers (Remi
     Pommarel)

  Cadence PCIe controller driver:

   - Add Root Complex/Endpoint DT schema for Cadence PCIe (Kishon Vijay
     Abraham I)

  Intel VMD host bridge driver:

   - Add two VMD Device IDs that require bus restriction mode (Sushma
     Kalakota)

  Mobiveil PCIe controller driver:

   - Refactor and modularize mobiveil driver (Hou Zhiqiang)

   - Add support for Mobiveil GPEX Gen4 host (Hou Zhiqiang)

  Microsoft Hyper-V host bridge driver:

   - Add support for Hyper-V PCI protocol version 1.3 and
     PCI_BUS_RELATIONS2 (Long Li)

   - Refactor to prepare for virtual PCI on non-x86 architectures (Boqun
     Feng)

   - Fix memory leak in hv_pci_probe()'s error path (Dexuan Cui)

  NVIDIA Tegra PCIe controller driver:

   - Use pci_parse_request_of_pci_ranges() (Rob Herring)

   - Add support for endpoint mode and related DT updates (Vidya Sagar)

   - Reduce -EPROBE_DEFER error message log level (Thierry Reding)

  Qualcomm PCIe controller driver:

   - Restrict class fixup to specific Qualcomm devices (Bjorn Andersson)

  Synopsys DesignWare PCIe controller driver:

   - Refactor core initialization code for endpoint mode (Vidya Sagar)

   - Fix endpoint MSI-X to use correct table address (Kishon Vijay
     Abraham I)

  TI DRA7xx PCIe controller driver:

   - Fix MSI IRQ handling (Vignesh Raghavendra)

  TI Keystone PCIe controller driver:

   - Allow AM654 endpoint to raise MSI-X interrupt (Kishon Vijay Abraham I)

  Miscellaneous:

   - Quirk ASMedia XHCI USB to avoid "PME# from D0" defect (Kai-Heng
     Feng)

   - Use ioremap(), not phys_to_virt(), for platform ROM to fix video
     ROM mapping with CONFIG_HIGHMEM (Mikel Rychliski)"

* tag 'pci-v5.7-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (96 commits)
  misc: pci_endpoint_test: remove duplicate macro PCI_ENDPOINT_TEST_STATUS
  PCI: tegra: Print -EPROBE_DEFER error message at debug level
  misc: pci_endpoint_test: Use full pci-endpoint-test name in request_irq()
  misc: pci_endpoint_test: Fix to support > 10 pci-endpoint-test devices
  tools: PCI: Add 'e' to clear IRQ
  misc: pci_endpoint_test: Add ioctl to clear IRQ
  misc: pci_endpoint_test: Avoid using module parameter to determine irqtype
  PCI: keystone: Allow AM654 PCIe Endpoint to raise MSI-X interrupt
  PCI: dwc: Fix dw_pcie_ep_raise_msix_irq() to get correct MSI-X table address
  PCI: endpoint: Fix ->set_msix() to take BIR and offset as arguments
  misc: pci_endpoint_test: Add support to get DMA option from userspace
  tools: PCI: Add 'd' command line option to support DMA
  misc: pci_endpoint_test: Use streaming DMA APIs for buffer allocation
  PCI: endpoint: functions/pci-epf-test: Print throughput information
  PCI: endpoint: functions/pci-epf-test: Add DMA support to transfer data
  PCI: pciehp: Fix MSI interrupt race
  PCI: pciehp: Fix indefinite wait on sysfs requests
  PCI: endpoint: Fix clearing start entry in configfs
  PCI: tegra: Add support for PCIe endpoint mode in Tegra194
  PCI: sysfs: Revert "rescan" file renames
  ...
 2020-04-03 14:25:02 -07:00
Linus Torvalds
0ad5b053d4 Char/Misc driver patches for 5.7-rc1 
Here is the big set of char/misc/other driver patches for 5.7-rc1.
 
 Lots of things in here, and it's later than expected due to some reverts
 to resolve some reported issues.  All is now clean with no reported
 problems in linux-next.
 
 Included in here is:
 	- interconnect updates
 	- mei driver updates
 	- uio updates
 	- nvmem driver updates
 	- soundwire updates
 	- binderfs updates
 	- coresight updates
 	- habanalabs updates
 	- mhi new bus type and core
 	- extcon driver updates
 	- some Kconfig cleanups
 	- other small misc driver cleanups and updates
 
 As mentioned, all have been in linux-next for a while, and with the last
 two reverts, all is calm and good.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXodfvA8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ynzCQCfROhar3E8EhYEqSOP6xq6uhX9uegAnRgGY2rs
 rN4JJpOcTddvZcVlD+vo
 =ocWk
 -----END PGP SIGNATURE-----

Merge tag 'char-misc-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc driver updates from Greg KH:
 "Here is the big set of char/misc/other driver patches for 5.7-rc1.

  Lots of things in here, and it's later than expected due to some
  reverts to resolve some reported issues. All is now clean with no
  reported problems in linux-next.

  Included in here is:
   - interconnect updates
   - mei driver updates
   - uio updates
   - nvmem driver updates
   - soundwire updates
   - binderfs updates
   - coresight updates
   - habanalabs updates
   - mhi new bus type and core
   - extcon driver updates
   - some Kconfig cleanups
   - other small misc driver cleanups and updates

  As mentioned, all have been in linux-next for a while, and with the
  last two reverts, all is calm and good"

* tag 'char-misc-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (174 commits)
  Revert "driver core: platform: Initialize dma_parms for platform devices"
  Revert "amba: Initialize dma_parms for amba devices"
  amba: Initialize dma_parms for amba devices
  driver core: platform: Initialize dma_parms for platform devices
  bus: mhi: core: Drop the references to mhi_dev in mhi_destroy_device()
  bus: mhi: core: Initialize bhie field in mhi_cntrl for RDDM capture
  bus: mhi: core: Add support for reading MHI info from device
  misc: rtsx: set correct pcr_ops for rts522A
  speakup: misc: Use dynamic minor numbers for speakup devices
  mei: me: add cedar fork device ids
  coresight: do not use the BIT() macro in the UAPI header
  Documentation: provide IBM contacts for embargoed hardware
  nvmem: core: remove nvmem_sysfs_get_groups()
  nvmem: core: use is_bin_visible for permissions
  nvmem: core: use device_register and device_unregister
  nvmem: core: add root_only member to nvmem device struct
  extcon: axp288: Add wakeup support
  extcon: Mark extcon_get_edev_name() function as exported symbol
  extcon: palmas: Hide error messages if gpio returns -EPROBE_DEFER
  dt-bindings: extcon: usbc-cros-ec: convert extcon-usbc-cros-ec.txt to yaml format
  ...
 2020-04-03 13:22:40 -07:00
Linus Torvalds
ff2ae607c6 SPDX patches for 5.7-rc1. 
Here are 3 SPDX patches for 5.7-rc1.
 
 One fixes up the SPDX tag for a single driver, while the other two go
 through the tree and add SPDX tags for all of the .gitignore files as
 needed.
 
 Nothing too complex, but you will get a merge conflict with your current
 tree, that should be trivial to handle (one file modified by two things,
 one file deleted.)
 
 All 3 of these have been in linux-next for a while, with no reported
 issues other than the merge conflict.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXodg5A8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ykySQCgy9YDrkz7nWq6v3Gohl6+lW/L+rMAnRM4uTZm
 m5AuCzO3Azt9KBi7NL+L
 =2Lm5
 -----END PGP SIGNATURE-----

Merge tag 'spdx-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx

Pull SPDX updates from Greg KH:
 "Here are three SPDX patches for 5.7-rc1.

  One fixes up the SPDX tag for a single driver, while the other two go
  through the tree and add SPDX tags for all of the .gitignore files as
  needed.

  Nothing too complex, but you will get a merge conflict with your
  current tree, that should be trivial to handle (one file modified by
  two things, one file deleted.)

  All three of these have been in linux-next for a while, with no
  reported issues other than the merge conflict"

* tag 'spdx-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx:
  ASoC: MT6660: make spdxcheck.py happy
  .gitignore: add SPDX License Identifier
  .gitignore: remove too obvious comments
 2020-04-03 13:12:26 -07:00
Linus Torvalds
d883600523 Merge branch 'for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup 
Pull cgroup updates from Tejun Heo:

 - Christian extended clone3 so that processes can be spawned into
   cgroups directly.

   This is not only neat in terms of semantics but also avoids grabbing
   the global cgroup_threadgroup_rwsem for migration.

 - Daniel added !root xattr support to cgroupfs.

   Userland already uses xattrs on cgroupfs for bookkeeping. This will
   allow delegated cgroups to support such usages.

 - Prateek tried to make cpuset hotplug handling synchronous but that
   led to possible deadlock scenarios. Reverted.

 - Other minor changes including release_agent_path handling cleanup.

* 'for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  docs: cgroup-v1: Document the cpuset_v2_mode mount option
  Revert "cpuset: Make cpuset hotplug synchronous"
  cgroupfs: Support user xattrs
  kernfs: Add option to enable user xattrs
  kernfs: Add removed_size out param for simple_xattr_set
  kernfs: kvmalloc xattr value instead of kmalloc
  cgroup: Restructure release_agent_path handling
  selftests/cgroup: add tests for cloning into cgroups
  clone3: allow spawning processes into cgroups
  cgroup: add cgroup_may_write() helper
  cgroup: refactor fork helpers
  cgroup: add cgroup_get_from_file() helper
  cgroup: unify attach permission checking
  cpuset: Make cpuset hotplug synchronous
  cgroup.c: Use built-in RCU list checking
  kselftest/cgroup: add cgroup destruction test
  cgroup: Clean up css_set task traversal
 2020-04-03 11:30:20 -07:00
Arnaldo Carvalho de Melo
9ff76cea4e perf python: Fix clang detection to strip out options passed in $CC 
The clang check in the python setup.py file expected $CC to be just the
name of the compiler, not the compiler + options, i.e. all options were
expected to be passed in $CFLAGS, this ends up making it fail in systems
where CC is set to, e.g.:

 "aarch64-linaro-linux-gcc --sysroot=/oe/build/tmp/work/juno-linaro-linux/perf/1.0-r9/recipe-sysroot"

Like this:

  $ python3
  >>> from subprocess import Popen
  >>> a = Popen(["aarch64-linux-gnu-gcc --sysroot=/oe/build/tmp/work/juno-linaro-linux/perf/1.0-r9/recipe-sysroot", "-v"])
  Traceback (most recent call last):
    File "<stdin>", line 1, in <module>
    File "/usr/lib/python3.6/subprocess.py", line 729, in __init__
      restore_signals, start_new_session)
    File "/usr/lib/python3.6/subprocess.py", line 1364, in _execute_child
      raise child_exception_type(errno_num, err_msg, err_filename)
  FileNotFoundError: [Errno 2] No such file or directory: 'aarch64-linux-gnu-gcc --sysroot=/oe/build/tmp/work/juno-linaro-linux/perf/1.0-r9/recipe-sysroot': 'aarch64-linux-gnu-gcc --sysroot=/oe/build/tmp/work/juno-linaro-linux/perf/1.0-r9/recipe-sysroot'
  >>>

Make it more robust, covering this case, by passing cc.split()[0] as the
first arg to popen().

Fixes: a7ffd416d8 ("perf python: Fix clang detection when using CC=clang-version")
Reported-by: Daniel Díaz <daniel.diaz@linaro.org>
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Tested-by: Daniel Díaz <daniel.diaz@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ilie Halip <ilie.halip@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/20200401124037.GA12534@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
 2020-04-03 10:04:59 -03:00
Sam Lunt
b9c9ce4e59 perf tools: Support Python 3.8+ in Makefile 
Python 3.8 changed the output of 'python-config --ldflags' to no longer
include the '-lpythonX.Y' flag (this apparently fixed an issue loading
modules with a statically linked Python executable).  The libpython
feature check in linux/build/feature fails if the Python library is not
included in FEATURE_CHECK_LDFLAGS-libpython variable.

This adds a check in the Makefile to determine if PYTHON_CONFIG accepts
the '--embed' flag and passes that flag alongside '--ldflags' if so.

tools/perf is the only place the libpython feature check is used.

Signed-off-by: Sam Lunt <samuel.j.lunt@gmail.com>
Tested-by: He Zhe <zhe.he@windriver.com>
Link: http://lore.kernel.org/lkml/c56be2e1-8111-9dfe-8298-f7d0f9ab7431@windriver.com
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: trivial@kernel.org
Cc: stable@kernel.org
Link: http://lore.kernel.org/lkml/20200131181123.tmamivhq4b7uqasr@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
 2020-04-03 10:03:44 -03:00
Andreas Gerstmayr
27486a85cb perf script: Fix invalid read of directory entry after closedir() 
closedir(lang_dir) frees the memory of script_dirent->d_name, which
gets accessed in the next line in a call to scnprintf().

Valgrind report:

  Invalid read of size 1
  ==413557==    at 0x483CBE6: strlen (vg_replace_strmem.c:461)
  ==413557==    by 0x4DD45FD: __vfprintf_internal (vfprintf-internal.c:1688)
  ==413557==    by 0x4DE6679: __vsnprintf_internal (vsnprintf.c:114)
  ==413557==    by 0x53A037: vsnprintf (stdio2.h:80)
  ==413557==    by 0x53A037: scnprintf (vsprintf.c:21)
  ==413557==    by 0x435202: get_script_path (builtin-script.c:3223)
  ==413557==  Address 0x52e7313 is 1,139 bytes inside a block of size 32,816 free'd
  ==413557==    at 0x483AA0C: free (vg_replace_malloc.c:540)
  ==413557==    by 0x4E303C0: closedir (closedir.c:50)
  ==413557==    by 0x4351DC: get_script_path (builtin-script.c:3222)

Signed-off-by: Andreas Gerstmayr <agerstmayr@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200402124337.419456-1-agerstmayr@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
 2020-04-03 10:03:18 -03:00
Andreas Gerstmayr
1a4025f060 perf script report: Fix SEGFAULT when using DWARF mode 
When running perf script report with a Python script and a callgraph in
DWARF mode, intr_regs->regs can be 0 and therefore crashing the regs_map
function.

Added a check for this condition (same check as in builtin-script.c:595).

Signed-off-by: Andreas Gerstmayr <agerstmayr@redhat.com>
Tested-by: Kim Phillips <kim.phillips@amd.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Link: http://lore.kernel.org/lkml/20200402125417.422232-1-agerstmayr@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
 2020-04-03 09:39:53 -03:00
Ian Rogers
628d736d91 perf script: add -S/--symbols documentation 
Capture both that this option exists and that symbols can be hexadecimal
addresses.

Signed-off-by: Ian Rogers <irogers@google.com>
Suggested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200402174130.140319-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
 2020-04-03 09:37:56 -03:00
Jin Yao
8ed1faf015 perf pmu-events x86: Use CPU_CLK_UNHALTED.THREAD in Kernel_Utilization metric 
The kernel utilization metric does multiplexing currently and is somewhat
unreliable. The problem is that it uses two instances of the fixed counter,
and the kernel has to multipleplex which causes errors. So should use
CPU_CLK_UNHALTED.THREAD instead.

Before:

  # perf stat -M Kernel_Utilization -- sleep 1

  Performance counter stats for 'sleep 1':

          1,419,425      cpu_clk_unhalted.ref_tsc:k
      <not counted>      cpu_clk_unhalted.ref_tsc	(0.00%)

After:

  # perf stat -M Kernel_Utilization -- sleep 1

  Performance counter stats for 'sleep 1':

            746,688      cpu_clk_unhalted.thread:k #      0.7 Kernel_Utilization
          1,088,348      cpu_clk_unhalted.thread

Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jin Yao <yao.jin@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200309013125.7559-1-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
 2020-04-03 09:37:56 -03:00
Adrian Hunter
47327f5667 perf events parser: Add missing Intel CPU events to parser 
perf list expects CPU events to be parseable by name, e.g.

    # perf list | grep el-capacity-read
      el-capacity-read OR cpu/el-capacity-read/          [Kernel PMU event]

But the event parser does not recognize them that way, e.g.

    # perf test -v "Parse event"
    <SNIP>
    running test 54 'cycles//u'
    running test 55 'cycles:k'
    running test 0 'cpu/config=10,config1,config2=3,period=1000/u'
    running test 1 'cpu/config=1,name=krava/u,cpu/config=2/u'
    running test 2 'cpu/config=1,call-graph=fp,time,period=100000/,cpu/config=2,call-graph=no,time=0,period=2000/'
    running test 3 'cpu/name='COMPLEX_CYCLES_NAME:orig=cycles,desc=chip-clock-ticks',period=0x1,event=0x2/ukp'
    -> cpu/event=0,umask=0x11/
    -> cpu/event=0,umask=0x13/
    -> cpu/event=0x54,umask=0x1/
    failed to parse event 'el-capacity-read:u,cpu/event=el-capacity-read/u', err 1, str 'parser error'
    event syntax error: 'el-capacity-read:u,cpu/event=el-capacity-read/u'
                           \___ parser error test child finished with 1
    ---- end ----
    Parse event definition strings: FAILED!

This happens because the parser splits names by '-' in order to deal
with cache events. For example 'L1-dcache' is a token in
parse-events.l which is matched to 'L1-dcache-load-miss' by the
following rule:

    PE_NAME_CACHE_TYPE '-' PE_NAME_CACHE_OP_RESULT '-' PE_NAME_CACHE_OP_RESULT opt_event_config

And so there is special handling for 2-part PMU names i.e.

    PE_PMU_EVENT_PRE '-' PE_PMU_EVENT_SUF sep_dc

but no handling for 3-part names, which are instead added as tokens e.g.

    topdown-[a-z-]+

While it would be possible to add a rule for 3-part names, that would
not work if the first parts were also a valid PMU name e.g.
'el-capacity-read' would be matched to 'el-capacity' before the parser
reached the 3rd part.

The parser would need significant change to rationalize all this, so
instead fix for now by adding missing Intel CPU events with 3-part names
to the event parser as tokens.

Missing events were found by using:

    grep -r EVENT_ATTR_STR arch/x86/events/intel/core.c

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Link: http://lore.kernel.org/lkml/90c7ae07-c568-b6d3-f9c4-d0c1528a0610@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
 2020-04-03 09:37:56 -03:00
Stephane Eranian
d2bedb7863 perf script: Allow --symbol to accept hexadecimal addresses 
This patch extends the perf script --symbols option to filter on
hexadecimal addresses in addition to symbol names. This makes it easier
to handle cases where symbols are aliased.

With this patch, it is possible to mix and match symbols and hexadecimal
addresses using the --symbols option.

  $ perf script --symbols=noploop,0x4007a0

Signed-off-by: Stephane Eranian <eranian@google.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200325220802.15039-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
 2020-04-03 09:37:56 -03:00
Arnaldo Carvalho de Melo
376c3c22e2 perf report/top TUI: Fix title line formatting 
In d10ec006dc ("perf hists browser: Allow passing an initial hotkey")
the hist_entry__title() call was cut'n'pasted to a function where the
'title' variable is a pointer, not an array, so the sizeof(title)
continues syntactically valid but ends up reducing the real size of the
buffer where to format the first line in the screen to 8 bytes, which
makes the formatting at the title at each refresh to produce just the
string "Samples ", duh, fix it by passing the size of the buffer.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Fixes: d10ec006dc ("perf hists browser: Allow passing an initial hotkey")
Link: http://lore.kernel.org/lkml/20200330154314.GB4576@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
 2020-04-03 09:37:55 -03:00
Jin Yao
2605af0f32 perf top: Support hotkey to change sort order 
It would be nice if we can use a hotkey in perf top browser to select a
event for sorting.

For example:

  perf top --group -e cycles,instructions,cache-misses

  Samples
                  Overhead  Shared Object             Symbol
    40.03%  45.71%   0.03%  div                       [.] main
    20.46%  14.67%   0.21%  libc-2.27.so              [.] __random_r
    20.01%  19.54%   0.02%  libc-2.27.so              [.] __random
     9.68%  10.68%   0.00%  div                       [.] compute_flag
     4.32%   4.70%   0.00%  libc-2.27.so              [.] rand
     3.84%   3.43%   0.00%  div                       [.] rand@plt
     0.05%   0.05%   2.33%  libc-2.27.so              [.] __strcmp_sse2_unaligned
     0.04%   0.08%   2.43%  perf                      [.] perf_hpp__is_dynamic_en
     0.04%   0.02%   6.64%  perf                      [.] rb_next
     0.04%   0.01%   3.87%  perf                      [.] dso__find_symbol
     0.04%   0.04%   1.77%  perf                      [.] sort__dso_cmp

When user press hotkey '2' (event index, starting from 0), it indicates
to sort output by the third event in group (cache-misses).

  Samples
                  Overhead  Shared Object               Symbol
     4.07%   1.28%   6.68%  perf                        [.] rb_next
     3.57%   3.98%   4.11%  perf                        [.] __hists__insert_output
     3.67%  11.24%   3.60%  perf                        [.] perf_hpp__is_dynamic_e
     3.67%   3.20%   3.20%  perf                        [.] hpp__sort_overhead
     0.81%   0.06%   3.01%  perf                        [.] dso__find_symbol
     1.62%   5.47%   2.51%  perf                        [.] hists__match
     2.70%   1.86%   2.47%  libc-2.27.so                [.] _int_malloc
     0.19%   0.00%   2.29%  [kernel]                    [k] copy_page
     0.41%   0.32%   1.98%  perf                        [.] hists__decay_entries
     1.84%   3.67%   1.68%  perf                        [.] sort__dso_cmp
     0.16%   0.00%   1.63%  [kernel]                    [k] clear_page_erms

Now the output is sorted by cache-misses.

 v2:
 ---
 Zero the history if hotkey is pressed.

Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Suggested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200324220711.6025-2-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
 2020-04-03 09:37:55 -03:00
Jin Yao
df7deb2cce perf top: Support --group-sort-idx to change the sort order 
'perf report' supports the option --group-sort-idx, which sorts the
output by the event at the index n in event group.

For example:

  perf record -e cycles,instructions,cache-misses
  perf report --group --group-sort-idx 2 --stdio

The perf-report output is sorted by cache-misses.

This patch supports --group-sort-idx in perf-top.

For example:

  perf top --group -e cycles,instructions,cache-misses --group-sort-idx 2

The perf-top output is sorted by cache-misses.

Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Suggested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200324220711.6025-1-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
 2020-04-03 09:37:55 -03:00
Kemeng Shi
78886f3ed3 perf symbols: Fix arm64 gap between kernel start and module end 
During execution of command 'perf report' in my arm64 virtual machine,
this error message is showed:

failed to process sample

__symbol__inc_addr_samples(860): ENOMEM! sym->name=__this_module,
    start=0x1477100, addr=0x147dbd8, end=0x80002000, func: 0

The error is caused with path:
cmd_report
 __cmd_report
  perf_session__process_events
   __perf_session__process_events
    ordered_events__flush
     __ordered_events__flush
      oe->deliver (ordered_events__deliver_event)
       perf_session__deliver_event
        machines__deliver_event
         perf_evlist__deliver_sample
          tool->sample (process_sample_event)
           hist_entry_iter__add
            iter->add_entry_cb(hist_iter__report_callback)
             hist_entry__inc_addr_samples
              symbol__inc_addr_samples
               __symbol__inc_addr_samples
                h = annotated_source__histogram(src, evidx) (NULL)

annotated_source__histogram failed is caused with path:
...
 hist_entry__inc_addr_samples
  symbol__inc_addr_samples
   symbol__hists
    annotated_source__alloc_histograms
     src->histograms = calloc(nr_hists, sizeof_sym_hist) (failed)

Calloc failed as the symbol__size(sym) is too huge. As show in error
message: start=0x1477100, end=0x80002000, size of symbol is about 2G.

This is the same problem as 'perf annotate: Fix s390 gap between kernel
end and module start (b9c0a64901)'. Perf gets symbol information from
/proc/kallsyms in __dso__load_kallsyms. A part of symbol in /proc/kallsyms
from my virtual machine is as follows:
 #cat /proc/kallsyms | sort
 ...
 ffff000001475080 d rpfilter_mt_reg      [ip6t_rpfilter]
 ffff000001475100 d $d   [ip6t_rpfilter]
 ffff000001475100 d __this_module        [ip6t_rpfilter]
 ffff000080080000 t _head
 ffff000080080000 T _text
 ffff000080080040 t pe_header
 ...

Take line 'ffff000001475100 d __this_module [ip6t_rpfilter]' as example.
The start and end of symbol are both set to ffff000001475100 in
dso__load_all_kallsyms. Then symbols__fixup_end will set the end of symbol
to next big address to ffff000001475100 in /proc/kallsyms, ffff000080080000
in this example. Then sizeof of symbol will be about 2G and cause the
problem.

The start of module in my machine is
 ffff000000a62000 t $x   [dm_mod]

The start of kernel in my machine is
 ffff000080080000 t _head

There is a big gap between end of module and begin of kernel if a samll
amount of memory is used by module. And the last symbol in module will
have a large address range as caotaining the big gap.

Give that the module and kernel text segment sequence may change in
the future, fix this by limiting range of last symbol in module and kernel
to 4K in arch arm64.

Signed-off-by: Kemeng Shi <shikemeng@huawei.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Hewenliang <hewenliang4@huawei.com>
Cc: Hu Shiyuan <hushiyuan@huawei.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Link: http://lore.kernel.org/lkml/33fd24c4-0d5a-9d93-9b62-dffa97c992ca@huawei.com
[ refreshed the patch on current codebase, added string.h include as strchr() is used ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
 2020-04-03 09:37:55 -03:00
Arnaldo Carvalho de Melo
7b1642f2fc perf build-test: Honour JOBS to override detection of number of cores 
When one does:

  $ make -C tools/perf build-test

The makefile in tools/perf/tests/ will, just like the main one, detect
how many cores are in the system and use it with -j.

Sometimes we may need to override that, for instance, when using
icecream or distcc to use multiple machines in the build process, then
we need to, as with the main makefile, use:

  $ make JOBS=N -C tools/perf build-test

Fix the tests makefile to honour that.

Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/20200330130301.GA31702@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
 2020-04-03 09:37:55 -03:00
Namhyung Kim
160d4af97b perf script: Add --show-cgroup-events option 
The --show-cgroup-events option is to print CGROUP events in the
output like others.

Committer testing:

  [root@seventh ~]# perf record --all-cgroups --namespaces /wb/cgtest
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.039 MB perf.data (487 samples) ]
  [root@seventh ~]# perf script --show-cgroup-events | grep PERF_RECORD_CGROUP -B2 -A2
           swapper     0     0.000000: PERF_RECORD_CGROUP cgroup: 1 /
              perf 12145 11200.440730:          1 cycles:  ffffffffb900d58b __intel_pmu_enable_all.constprop.0+0x3b (/lib/modules/5.6.0-rc6-00008-gfe2413eefd7f/build/vmlinux)
              perf 12145 11200.440733:          1 cycles:  ffffffffb900d58b __intel_pmu_enable_all.constprop.0+0x3b (/lib/modules/5.6.0-rc6-00008-gfe2413eefd7f/build/vmlinux)
  --
            cgtest 12145 11200.440739:     193472 cycles:  ffffffffb90f6fbc commit_creds+0x1fc (/lib/modules/5.6.0-rc6-00008-gfe2413eefd7f/build/vmlinux)
            cgtest 12145 11200.440790:    2691608 cycles:      7fa2cb43019b _dl_sysdep_start+0x7cb (/usr/lib64/ld-2.29.so)
            cgtest 12145 11200.440962: PERF_RECORD_CGROUP cgroup: 83 /sub
            cgtest 12147 11200.441054:          1 cycles:  ffffffffb900d58b __intel_pmu_enable_all.constprop.0+0x3b (/lib/modules/5.6.0-rc6-00008-gfe2413eefd7f/build/vmlinux)
            cgtest 12147 11200.441057:          1 cycles:  ffffffffb900d58b __intel_pmu_enable_all.constprop.0+0x3b (/lib/modules/5.6.0-rc6-00008-gfe2413eefd7f/build/vmlinux)
  --
            cgtest 12148 11200.441103:      10227 cycles:  ffffffffb9a0153d end_repeat_nmi+0x48 (/lib/modules/5.6.0-rc6-00008-gfe2413eefd7f/build/vmlinux)
            cgtest 12148 11200.441106:     273295 cycles:  ffffffffb99ecbc7 copy_page+0x7 (/lib/modules/5.6.0-rc6-00008-gfe2413eefd7f/build/vmlinux)
            cgtest 12147 11200.441133: PERF_RECORD_CGROUP cgroup: 88 /sub/cgrp1
            cgtest 12147 11200.441143:    2788845 cycles:  ffffffffb94676c2 security_genfs_sid+0x102 (/lib/modules/5.6.0-rc6-00008-gfe2413eefd7f/build/vmlinux)
            cgtest 12148 11200.441162: PERF_RECORD_CGROUP cgroup: 93 /sub/cgrp2
            cgtest 12148 11200.441182:    2669546 cycles:            401020 _init+0x20 (/wb/cgtest)
            cgtest 12149 11200.441247:          1 cycles:  ffffffffb900d58b __intel_pmu_enable_all.constprop.0+0x3b (/lib/modules/5.6.0-rc6-00008-gfe2413eefd7f/build/vmlinux)
  [root@seventh ~]#

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200325124536.2800725-10-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
 2020-04-03 09:37:55 -03:00
Namhyung Kim
f382842fa0 perf top: Add --all-cgroups option 
The --all-cgroups option is to enable cgroup profiling support.  It
tells kernel to record CGROUP events in the ring buffer so that 'perf
top' can identify task/cgroup association later.

Committer testing:

Use:

  # perf top --all-cgroups -s cgroup_id,cgroup,pid

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200325124536.2800725-9-namhyung@kernel.org
Link: http://lore.kernel.org/lkml/20200402015249.3800462-1-namhyung@kernel.org
[ Extracted the HAVE_FILE_HANDLE from the followup patch ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
 2020-04-03 09:37:55 -03:00
Namhyung Kim
8fb4b67939 perf record: Add --all-cgroups option 
The --all-cgroups option is to enable cgroup profiling support.  It
tells kernel to record CGROUP events in the ring buffer so that perf
report can identify task/cgroup association later.

  [root@seventh ~]# perf record --all-cgroups --namespaces /wb/cgtest
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.042 MB perf.data (558 samples) ]
  [root@seventh ~]# perf report --stdio -s cgroup_id,cgroup,pid
  # To display the perf.data header info, please use --header/--header-only options.
  #
  #
  # Total Lost Samples: 0
  #
  # Samples: 558  of event 'cycles'
  # Event count (approx.): 458017341
  #
  # Overhead  cgroup id (dev/inode)  Cgroup          Pid:Command
  # ........  .....................  ..........  ...............
  #
      33.15%  4/0xeffffffb           /sub           9615:looper0
      32.83%  4/0xf00002f5           /sub/cgrp2     9620:looper2
      32.79%  4/0xf00002f4           /sub/cgrp1     9619:looper1
       0.35%  4/0xf00002f5           /sub/cgrp2     9618:cgtest
       0.34%  4/0xf00002f4           /sub/cgrp1     9617:cgtest
       0.32%  4/0xeffffffb           /              9615:looper0
       0.11%  4/0xeffffffb           /sub           9617:cgtest
       0.10%  4/0xeffffffb           /sub           9618:cgtest

  #
  # (Tip: Sample related events with: perf record -e '{cycles,instructions}:S')
  #
  [root@seventh ~]#

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200325124536.2800725-8-namhyung@kernel.org
Link: http://lore.kernel.org/lkml/20200402015249.3800462-1-namhyung@kernel.org
[ Extracted the HAVE_FILE_HANDLE from the followup patch ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
 2020-04-03 09:37:55 -03:00
Namhyung Kim
ab64069f1a perf record: Support synthesizing cgroup events 
Synthesize cgroup events by iterating cgroup filesystem directories.
The cgroup event only saves the portion of cgroup path after the mount
point and the cgroup id (which actually is a file handle).

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200325124536.2800725-7-namhyung@kernel.org
Link: http://lore.kernel.org/lkml/20200402015249.3800462-1-namhyung@kernel.org
[ Extracted the HAVE_FILE_HANDLE from the followup patch, added missing __maybe_unused ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
 2020-04-03 09:37:55 -03:00