mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-21 19:53:59 +08:00
b852495908
24550 Commits
Author | SHA1 | Message | Date | |
---|---|---|---|---|
Linus Torvalds
|
b852495908 |
Merge branch 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang: "Mostly usual driver updates and improvements. The changelog should give an idea. Standing out is the i2c-qup driver with lots of new capabilities and we also have now an i2c-demuxer. I'd especially like to welcome Peter Rosin as the i2c-mux maintainer. He has an interesting series for muxes in the queue and agreed to look after this part of the subsystem. Thank you, Peter, and welcome again! The octeon changes were applied pretty recently before the merge window. I am aware. They are the first (and relatively simple) patches of a larger overhaul to this driver. In case something goes wrong with them, they are easy to fix (or revert). The advantage I see is that they are out of the way, and I can concentrate on the next block of patches. I really would like to apply the overhaul in smaller batches to avoid regressions. And waiting a cycle for the introductory patches seemed too much of a delay for me" * 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (39 commits) i2c: octeon: Support I2C_M_RECV_LEN i2c: octeon: Cleanup resource allocation code i2c: octeon: Cleanup i2c-octeon driver MAINTAINERS: add Peter Rosin as i2c mux maintainer dt-bindings: i2c: Spelling s/propoerty/property/ i2c: immediately mark ourselves as registered i2c: i801: sort IDs alphabetically MAINTAINERS: Mika and me are designated reviewers for I2C DESIGNWARE i2c: octeon: Cleanup kerneldoc comments i2c: do not use internal data from driver core i2c: cadence: Fix the kernel-doc warnings i2c: imx: remove extra spaces. i2c: rcar: don't open code of_device_get_match_data() i2c: qup: Fix fifo handling after adding V2 support i2c: xiic: Implement power management i2c: piix4: Pre-shift the port number i2c: piix4: Always use the same type for port i2c: piix4: Support alternative port selection register i2c: tegra: don't open code of_device_get_match_data() i2c: riic, sh_mobile, rcar: Use ARCH_RENESAS ... |
||
Linus Torvalds
|
5266e5b12c |
Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending
Pull SCSI target updates from Nicholas Bellinger: "The highlights this round include: - Add target_alloc_session() w/ callback helper for doing se_session allocation + tag + se_node_acl lookup. (HCH + nab) - Tree-wide fabric driver conversion to use target_alloc_session() - Convert sbp-target to use percpu_ida tag pre-allocation, and TARGET_SCF_ACK_KREF I/O krefs (Chris Boot + nab) - Convert usb-gadget to use percpu_ida tag pre-allocation, and TARGET_SCF_ACK_KREF I/O krefs (Andrzej Pietrasiewicz + nab) - Convert xen-scsiback to use percpu_ida tag pre-allocation, and TARGET_SCF_ACK_KREF I/O krefs (Juergen Gross + nab) - Convert tcm_fc to use TARGET_SCF_ACK_KREF I/O + TMR krefs - Convert ib_srpt to use percpu_ida tag pre-allocation - Add DebugFS node for qla2xxx target sess list (Quinn) - Rework iser-target connection termination (Jenny + Sagi) - Convert iser-target to new CQ API (HCH) - Add pass-through WRITE_SAME support for IBLOCK (Mike Christie) - Introduce data_bitmap for asynchronous access of data area (Sheng Yang + Andy) - Fix target_release_cmd_kref shutdown comp leak (Himanshu Madhani) Also, there is a separate PULL request coming for cxgb4 NIC driver prerequisites for supporting hw iscsi segmentation offload (ISO), that will be the base for a number of v4.7 developments involving iscsi-target hw offloads" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (36 commits) target: Fix target_release_cmd_kref shutdown comp leak target: Avoid DataIN transfers for non-GOOD SAM status target/user: Report capability of handling out-of-order completions to userspace target/user: Fix size_t format-spec build warning target/user: Don't free expired command when time out target/user: Introduce data_bitmap, replace data_length/data_head/data_tail target/user: Free data ring in unified function target/user: Use iovec[] to describe continuous area target: Remove enum transport_lunflags_table target/iblock: pass WRITE_SAME to device if possible iser-target: Kill the ->isert_cmd back pointer in struct iser_tx_desc iser-target: Kill struct isert_rdma_wr iser-target: Convert to new CQ API iser-target: Split and properly type the login buffer iser-target: Remove ISER_RECV_DATA_SEG_LEN iser-target: Remove impossible condition from isert_wait_conn iser-target: Remove redundant wait in release_conn iser-target: Rework connection termination iser-target: Separate flows for np listeners and connections cma events iser-target: Add new state ISER_CONN_BOUND to isert_conn ... |
||
Linus Torvalds
|
b4af7f773e |
IOMMU Updates for Linux v4.6
This time with: * Updates for the Exynos IOMMU driver to make use of default domains and to add support for the SYSMMU v5 * New Mediatek IOMMU driver * Support for the ARMv7 short descriptor format in the io-pgtable code * Default domain support for the ARM SMMU * Couple of other small fixes all over the place -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.22 (GNU/Linux) iQIcBAABAgAGBQJW7/7rAAoJECvwRC2XARrjKvgP/2sgR6lzIGksKpZRNNNoyJEp PbFt3zxBvIPYow6rQtfMqU82FAi6psq+EVKq+M0EOeJrjFGawwWpN9H/e0ZCs5Z/ /s6DIljRFKrbty59eFsHn57Pd+302Pt0GkwnSgdgBJD7FimozyyeMJnAOs5gPjYT jF2ajV9FYa5rIRrMsSD2KjLKgBb3xVsgUlW72NU2WwldnOB6fSsfg4ll01kbzTon IQENT5ywk9zZFouLyrX6EvcvowHslO/sZhGe3Py9qOOHpu9roW7EE7rEGYdabn47 PGpw8O5NOeSrQNzlmhXje5tuKxkh33DV55s7vVcaOy66kWbYExJGoz1/V7Vju4n1 pok82L3N8eauMs3xqNOiQMV8UsWIXOzdMMaGypM18pCVKMaAUiz9vO9rLSmR4Z20 IYFiX0yBXhc1AXMnrRlq/xR2WjBX2L2s0VguvYoSssdmJUZ9aKYxsurF8Ylqpm+1 wymOj+gjM056DqAXcYBVg4ZPOEezRjnUe2qD8lZ4et3xOVUL3LXRi8FmacztEB97 chUSB5mur/XRy6bOVI2l1uRQaqdfErgbCey0fa9N/SWKSHKWtAfR6CYYVpoR6m0L H/xL7yCn6jUEoadKxZyTKnX8GIN6wNcZdI+58OOMz3sjlmWs69wgdPt8Xx2RNHpm 7caf/9sTdpUeh+V2fySD =uiAk -----END PGP SIGNATURE----- Merge tag 'iommu-updates-v4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull IOMMU updates from Joerg Roedel: - updates for the Exynos IOMMU driver to make use of default domains and to add support for the SYSMMU v5 - new Mediatek IOMMU driver - support for the ARMv7 short descriptor format in the io-pgtable code - default domain support for the ARM SMMU - couple of other small fixes all over the place * tag 'iommu-updates-v4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (41 commits) iommu/ipmmu-vmsa: Add r8a7795 DT binding iommu/mediatek: Check for NULL instead of IS_ERR() iommu/io-pgtable-armv7s: Fix kmem_cache_alloc() flags iommu/mediatek: Fix handling of of_count_phandle_with_args result iommu/dma: Fix NEED_SG_DMA_LENGTH dependency iommu/mediatek: Mark PM functions as __maybe_unused iommu/mediatek: Select ARM_DMA_USE_IOMMU iommu/exynos: Use proper readl/writel register interface iommu/exynos: Pointers are nto physical addresses dts: mt8173: Add iommu/smi nodes for mt8173 iommu/mediatek: Add mt8173 IOMMU driver memory: mediatek: Add SMI driver dt-bindings: mediatek: Add smi dts binding dt-bindings: iommu: Add binding for mediatek IOMMU iommu/ipmmu-vmsa: Use ARCH_RENESAS iommu/exynos: Support multiple attach_device calls iommu/exynos: Add Maintainers entry for Exynos SYSMMU driver iommu/exynos: Add support for v5 SYSMMU iommu/exynos: Update device tree documentation iommu/exynos: Add support for SYSMMU controller with bogus version reg ... |
||
Linus Torvalds
|
968f3e374f |
Merge branch 'for-linus-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs
Pull btrfs updates from Chris Mason: "We have a good sized cleanup of our internal read ahead code, and the first series of commits from Chandan to enable PAGE_SIZE > sectorsize Otherwise, it's a normal series of cleanups and fixes, with many thanks to Dave Sterba for doing most of the patch wrangling this time" * 'for-linus-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (82 commits) btrfs: make sure we stay inside the bvec during __btrfs_lookup_bio_sums btrfs: Fix misspellings in comments. btrfs: Print Warning only if ENOSPC_DEBUG is enabled btrfs: scrub: silence an uninitialized variable warning btrfs: move btrfs_compression_type to compression.h btrfs: rename btrfs_print_info to btrfs_print_mod_info Btrfs: Show a warning message if one of objectid reaches its highest value Documentation: btrfs: remove usage specific information btrfs: use kbasename in btrfsic_mount Btrfs: do not collect ordered extents when logging that inode exists Btrfs: fix race when checking if we can skip fsync'ing an inode Btrfs: fix listxattrs not listing all xattrs packed in the same item Btrfs: fix deadlock between direct IO reads and buffered writes Btrfs: fix extent_same allowing destination offset beyond i_size Btrfs: fix file loss on log replay after renaming a file and fsync Btrfs: fix unreplayable log after snapshot delete + parent dir fsync Btrfs: fix lockdep deadlock warning due to dev_replace btrfs: drop unused argument in btrfs_ioctl_get_supported_features btrfs: add GET_SUPPORTED_FEATURES to the control device ioctls btrfs: change max_inline default to 2048 ... |
||
Linus Torvalds
|
e531cdf50a |
MMC core:
- Fix ABI regression of MMC BLK ioctl - Remove the unused MMC_DATA_STREAM flag - Enable asynchronous system PM for the host device - Minor fixes and clean-ups SDHCI host: Throughout the years, the numbers of SDHCI variants have increased and so has also the numbers of SDHCI callbacks/quirks. The purpose of these callbacks/quirks were to enable SDHCI to deal with variant specific requirements, but unfortunate this method didn't scale. Instead we have ended up with a mess. Not only did the code become suboptimal but also highly fragile. Lately many discussions of how to move forward with SDHCI has taken place at the MMC mailing list. Step by step, we aim to turn SDHCI's common code into a set of library functions. This will enable for optimizations and allow some of the existing callbacks/quirks to be removed, which also should help to make the code less fragile. Therefore I am also really pleased to announce that Adrian Hunter (Intel) has volunteered to step in as the maintainer for SDHCI. Future wise, I hope the community around SDHCI will continue to grow and that this release cycle can be the starting point of moving SDHCI into a better shape. As a matter of fact, already in this cycle the re-factoring has begun, but of course there are also fixes and new features included. Some highlights: - sdhci-iproc: Add support for Broadcom's BCM2835 eMMC IP - sdhci-acpi: Add support for QCOM controllers - sdhci-pic32: Add new SDHCI variant for PIC32MZDA Other hosts: - atmel-mci: Fix a NULL pointer dereference - mediatek: Add SD write-protect support - mmc_spi: Fix card detect in GPIO case - tmio/sdhi: Add r8a7795 support - tmio/sdhi: Some fixes and clean-ups - dw_mmc: Add HW reset support - dw_mmc: Some fixes and clean-ups - sunxi: Add support for MMC DDR52 mode -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJW7+1kAAoJEP4mhCVzWIwpFREP+wcm8CLPoIz0VamZ8wocU5/S NK+EINCrVF4AbvcTj78A/FE099P5e3kXW84cZP5fCGSk7MvTizlIP0kDT73XkYbf FV1xQYAq5E9PtWfswyLqEiYcHVFzwhxwHRy8pXnJ7bummM8OvZYSnao4kdxzW3Mr j2lELoUVYma5hnoXBMrq04kjwPukdrFXYMz4BulE0aoCrfp2+CoKcDbykh97zWbu B7ta2NG5EuszXepgsAPSGbFDuFXJ4EeDtZNzowom6ifkKusNa+42lOyBA+WiHBZ6 kfSOyRHJ/URuGifir7hCXLvr2GVpFF3d399olDawCXEVCIhkrZ4SKJ25kLdABz9E IrikhpBlRIhquAW4clNnPNYWqGTsOT1Coj+6E/9XUHa8C8gGEV7W3j8nNzMCT2O4 GMynfyXKIJ6JnuM03qqv3kmATmbRI3fulR6OTNObgAWSGeZLuxa1bIYDVXhtr2nQ Spl4nViOnZdfdNz4LkqS6vuGKscKViWFtt/wLi+gnKtbGfffb8CGrucd13vQ7fiK OP9WZoWLQ+YlItXDee02vn4ccH463KjIIKJdLsvmSHz+lfPnXRI2KR37+j7sczvo V3msYYkbjB1hghAunR94Zc3RXwV28R1/mqcOGzXv2A+Q1J4g//Q+gS8DGzXzlaRV 58OJRqiyTWMktZ0TZM0V =MFMb -----END PGP SIGNATURE----- Merge tag 'mmc-v4.6' of git://git.linaro.org/people/ulf.hansson/mmc Pull MMC updates from Ulf Hansson: "MMC core: - Fix ABI regression of MMC BLK ioctl - Remove the unused MMC_DATA_STREAM flag - Enable asynchronous system PM for the host device - Minor fixes and clean-ups SDHCI host: Throughout the years, the numbers of SDHCI variants have increased and so has also the numbers of SDHCI callbacks/quirks. The purpose of these callbacks/quirks were to enable SDHCI to deal with variant specific requirements, but unfortunate this method didn't scale. Instead we have ended up with a mess. Not only did the code become suboptimal but also highly fragile. Lately many discussions of how to move forward with SDHCI has taken place at the MMC mailing list. Step by step, we aim to turn SDHCI's common code into a set of library functions. This will enable for optimizations and allow some of the existing callbacks and quirks to be removed, which also should help to make the code less fragile. Therefore I am also really pleased to announce that Adrian Hunter (Intel) has volunteered to step in as the maintainer for SDHCI. Future wise, I hope the community around SDHCI will continue to grow and that this release cycle can be the starting point of moving SDHCI into a better shape. As a matter of fact, already in this cycle the re-factoring has begun, but of course there are also fixes and new features included. Some highlights: - sdhci-iproc: Add support for Broadcom's BCM2835 eMMC IP - sdhci-acpi: Add support for QCOM controllers - sdhci-pic32: Add new SDHCI variant for PIC32MZDA Other hosts: - atmel-mci: Fix a NULL pointer dereference - mediatek: Add SD write-protect support - mmc_spi: Fix card detect in GPIO case - tmio/sdhi: Add r8a7795 support - tmio/sdhi: Some fixes and clean-ups - dw_mmc: Add HW reset support - dw_mmc: Some fixes and clean-ups - sunxi: Add support for MMC DDR52 mode" * tag 'mmc-v4.6' of git://git.linaro.org/people/ulf.hansson/mmc: (123 commits) mmc: sdhci-of-at91: fix wake-up issue when using runtime pm mmc: sdhci-pci: Do not set DMA mask in enable_dma() mmc: sdhci-acpi: Remove enable_dma() hook mmc: sdhci: Set DMA mask when adding host mmc: block: fix ABI regression of mmc_blk_ioctl mmc: atmel-mci: Check pdata for NULL before dereferencing it at DMA config mmc: core: remove redundant memset of sdio_read_cccr mmc: core: remove redundant memset of mmc_decode_cid mmc: of_mmc_spi: fix unused warning mmc: sdhci-of-arasan: add phy support for sdhci-of-arasan mmc: sdhci-of-arasan: fix missing sdhci_pltfm_free for err handling mmc: sdhci-of-arasan: remove disable clk_ahb from sdhci_arasan_resume Documentation: bindings: add description of phy for sdhci-of-arasan mmc: sdhci: Fix override of timeout clk wrt max_busy_timeout mmc: mmci: Remove unnecessary header file mmc: sdhci-acpi: add QCOM controllers mmc: tegra: implement memcomp pad calibration mmc: mediatek: Use mmc_regulator_set_vqmmc in start_signal_voltage_switch mmc: mediatek: Change signal voltage error to dev_dbg() mmc: sh_mmcif, tmio: Use ARCH_RENESAS ... |
||
Linus Torvalds
|
266c73b777 |
Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linux
Pull drm updates from Dave Airlie: "This is the main drm pull request for 4.6 kernel. Overall the coolest thing here for me is the nouveau maxwell signed firmware support from NVidia, it's taken a long while to extract this from them. I also wish the ARM vendors just designed one set of display IP, ARM display block proliferation is definitely increasing. Core: - drm_event cleanups - Internal API cleanup making mode_fixup optional. - Apple GMUX vga switcheroo support. - DP AUX testing interface Panel: - Refactoring of DSI core for use over more transports. New driver: - ARM hdlcd driver i915: - FBC/PSR (framebuffer compression, panel self refresh) enabled by default. - Ongoing atomic display support work - Ongoing runtime PM work - Pixel clock limit checks - VBT DSI description support - GEM fixes - GuC firmware scheduler enhancements amdkfd: - Deferred probing fixes to avoid make file or link ordering. amdgpu/radeon: - ACP support for i2s audio support. - Command Submission/GPU scheduler/GPUVM optimisations - Initial GPU reset support for amdgpu vmwgfx: - Support for DX10 gen mipmaps - Pageflipping and other fixes. exynos: - Exynos5420 SoC support for FIMD - Exynos5422 SoC support for MIPI-DSI nouveau: - GM20x secure boot support - adds acceleration for Maxwell GPUs. - GM200 support - GM20B clock driver support - Power sensors work etnaviv: - Correctness fixes for GPU cache flushing - Better support for i.MX6 systems. imx-drm: - VBlank IRQ support - Fence support - OF endpoint support msm: - HDMI support for 8996 (snapdragon 820) - Adreno 430 support - Timestamp queries support virtio-gpu: - Fixes for Android support. rockchip: - Add support for Innosilicion HDMI rcar-du: - Support for 4 crtcs - R8A7795 support - RCar Gen 3 support omapdrm: - HDMI interlace output support - dma-buf import support - Refactoring to remove a lot of legacy code. tilcdc: - Rewrite of pageflipping code - dma-buf support - pinctrl support vc4: - HDMI modesetting bug fixes - Significant 3D performance improvement. fsl-dcu (FreeScale): - Lots of fixes tegra: - Two small fixes sti: - Atomic support for planes - Improved HDMI support" * 'drm-next' of git://people.freedesktop.org/~airlied/linux: (1063 commits) drm/amdgpu: release_pages requires linux/pagemap.h drm/sti: restore mode_fixup callback drm/amdgpu/gfx7: add MTYPE definition drm/amdgpu: removing BO_VAs shouldn't be interruptible drm/amd/powerplay: show uvd/vce power gate enablement for tonga. drm/amd/powerplay: show uvd/vce power gate info for fiji drm/amdgpu: use sched fence if possible drm/amdgpu: move ib.fence to job.fence drm/amdgpu: give a fence param to ib_free drm/amdgpu: include the right version of gmc header files for iceland drm/radeon: fix indentation. drm/amd/powerplay: add uvd/vce dpm enabling flag to fix the performance issue for CZ drm/amdgpu: switch back to 32bit hw fences v2 drm/amdgpu: remove amdgpu_fence_is_signaled drm/amdgpu: drop the extra fence range check v2 drm/amdgpu: signal fences directly in amdgpu_fence_process drm/amdgpu: cleanup amdgpu_fence_wait_empty v2 drm/amdgpu: keep all fences in an RCU protected array v2 drm/amdgpu: add number of hardware submissions to amdgpu_fence_driver_init_ring drm/amdgpu: RCU protected amd_sched_fence_release ... |
||
Linus Torvalds
|
2c856e14da |
arm[64] perf updates for 4.6:
- Initial support for ARMv8.1 CPU PMUs - Support for the CPU PMU in Cavium ThunderX - CPU PMU support for systems running 32-bit Linux in secure mode - Support for the system PMU in ARM CCI-550 (Cache Coherent Interconnect) -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQEcBAABCgAGBQJW794rAAoJELescNyEwWM0O5IH/0ejoUjip3n4dFZnSzAbQQZe VxCy3DXW5gS8YaswwX2dFw9K772/BpHlazq8AIJIhaR+b+Zzl5t0iOc12HluDilV pMvi0JTCxwJhsEiKZnP0cVAU9HM6MAgtMOEegkd/YNESKQey30NeDtIcz/pQfTUV 28AF71+w5VPj/1EpHEEhHQsASRIx7eDbKzThzdlb8PnDS0o23QJhL9HjVTNIAlB8 BGxrUBKtBu0eH2Hx33vNjc7UYx1WZQlCk5cAaXevA8mbFXzYaMQI2Cel2nbNMO9i eu5zPkDUCG7dq16PxK6IgM4AsDCtmmDuckLdN6UEQWYxkLbb2qHNRKtj0bKB8Sk= =E4PE -----END PGP SIGNATURE----- Merge tag 'arm64-perf' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm[64] perf updates from Will Deacon: "I have another mixed bag of ARM-related perf patches here. It's about 25% CPU and 75% interconnect, but with drivers/bus/ languishing without an obvious maintainer or tree, Olof and I agreed to keep all of these PMU patches together. I suspect a whole load of code from drivers/bus/arm-* can be moved under drivers/perf/, so that's on the radar for the future. Summary: - Initial support for ARMv8.1 CPU PMUs - Support for the CPU PMU in Cavium ThunderX - CPU PMU support for systems running 32-bit Linux in secure mode - Support for the system PMU in ARM CCI-550 (Cache Coherent Interconnect)" * tag 'arm64-perf' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (26 commits) drivers/perf: arm_pmu: avoid NULL dereference when not using devicetree arm64: perf: Extend ARMV8_EVTYPE_MASK to include PMCR.LC arm-cci: remove unused variable arm-cci: don't return value from void function arm-cci: make private functions static arm-cci: CoreLink CCI-550 PMU driver arm-cci500: Rearrange PMU driver for code sharing with CCI-550 PMU arm-cci: CCI-500: Work around PMU counter writes arm-cci: Provide hook for writing to PMU counters arm-cci: Add helper to enable PMU without synchornising counters arm-cci: Add routines to save/restore all counters arm-cci: Get the status of a counter arm-cci: write_counter: Remove redundant check arm-cci: Delay PMU counter writes to pmu::pmu_enable arm-cci: Refactor CCI PMU enable/disable methods arm-cci: Group writes to counter arm-cci: fix handling cpumask_any_but return value arm-cci: simplify sysfs attr handling drivers/perf: arm_pmu: implement CPU_PM notifier arm64: dts: Add Cavium ThunderX specific PMU ... |
||
Linus Torvalds
|
d407574e79 |
Merge tag 'for-f2fs-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs updates from Jaegeuk Kim: "New Features: - uplift filesystem encryption into fs/crypto/ - give sysfs entries to control memroy consumption Enhancements: - aio performance by preallocating blocks in ->write_iter - use writepages lock for only WB_SYNC_ALL - avoid redundant inline_data conversion - enhance forground GC - use wait_for_stable_page as possible - speed up SEEK_DATA and fiiemap Bug Fixes: - corner case in terms of -ENOSPC for inline_data - hung task caused by long latency in shrinker - corruption between atomic write and f2fs_trace_pid - avoid garbage lengths in dentries - revoke atomicly written pages if an error occurs In addition, there are various minor bug fixes and clean-ups" * tag 'for-f2fs-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (81 commits) f2fs: submit node page write bios when really required f2fs: add missing argument to f2fs_setxattr stub f2fs: fix to avoid unneeded unlock_new_inode f2fs: clean up opened code with f2fs_update_dentry f2fs: declare static functions f2fs: use cryptoapi crc32 functions f2fs: modify the readahead method in ra_node_page() f2fs crypto: sync ext4_lookup and ext4_file_open fs crypto: move per-file encryption from f2fs tree to fs/crypto f2fs: mutex can't be used by down_write_nest_lock() f2fs: recovery missing dot dentries in root directory f2fs: fix to avoid deadlock when merging inline data f2fs: introduce f2fs_flush_merged_bios for cleanup f2fs: introduce f2fs_update_data_blkaddr for cleanup f2fs crypto: fix incorrect positioning for GCing encrypted data page f2fs: fix incorrect upper bound when iterating inode mapping tree f2fs: avoid hungtask problem caused by losing wake_up f2fs: trace old block address for CoWed page f2fs: try to flush inode after merging inline data f2fs: show more info about superblock recovery ... |
||
Linus Torvalds
|
5518f66b5a |
Merge branch 'for-4.6-ns' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup namespace support from Tejun Heo: "These are changes to implement namespace support for cgroup which has been pending for quite some time now. It is very straight-forward and only affects what part of cgroup hierarchies are visible. After unsharing, mounting a cgroup fs will be scoped to the cgroups the task belonged to at the time of unsharing and the cgroup paths exposed to userland would be adjusted accordingly" * 'for-4.6-ns' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cgroup: fix and restructure error handling in copy_cgroup_ns() cgroup: fix alloc_cgroup_ns() error handling in copy_cgroup_ns() Add FS_USERNS_FLAG to cgroup fs cgroup: Add documentation for cgroup namespaces cgroup: mount cgroupns-root when inside non-init cgroupns kernfs: define kernfs_node_dentry cgroup: cgroup namespace setns support cgroup: introduce cgroup namespaces sched: new clone flag CLONE_NEWCGROUP for cgroup namespace kernfs: Add API to generate relative kernfs path |
||
Joerg Roedel
|
70cf769c5b | Merge branches 'arm/rockchip', 'arm/exynos', 'arm/smmu', 'arm/mediatek', 'arm/io-pgtable', 'arm/renesas' and 'core' into next | ||
Linus Torvalds
|
643ad15d47 |
Merge branch 'mm-pkeys-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 protection key support from Ingo Molnar: "This tree adds support for a new memory protection hardware feature that is available in upcoming Intel CPUs: 'protection keys' (pkeys). There's a background article at LWN.net: https://lwn.net/Articles/643797/ The gist is that protection keys allow the encoding of user-controllable permission masks in the pte. So instead of having a fixed protection mask in the pte (which needs a system call to change and works on a per page basis), the user can map a (handful of) protection mask variants and can change the masks runtime relatively cheaply, without having to change every single page in the affected virtual memory range. This allows the dynamic switching of the protection bits of large amounts of virtual memory, via user-space instructions. It also allows more precise control of MMU permission bits: for example the executable bit is separate from the read bit (see more about that below). This tree adds the MM infrastructure and low level x86 glue needed for that, plus it adds a high level API to make use of protection keys - if a user-space application calls: mmap(..., PROT_EXEC); or mprotect(ptr, sz, PROT_EXEC); (note PROT_EXEC-only, without PROT_READ/WRITE), the kernel will notice this special case, and will set a special protection key on this memory range. It also sets the appropriate bits in the Protection Keys User Rights (PKRU) register so that the memory becomes unreadable and unwritable. So using protection keys the kernel is able to implement 'true' PROT_EXEC on x86 CPUs: without protection keys PROT_EXEC implies PROT_READ as well. Unreadable executable mappings have security advantages: they cannot be read via information leaks to figure out ASLR details, nor can they be scanned for ROP gadgets - and they cannot be used by exploits for data purposes either. We know about no user-space code that relies on pure PROT_EXEC mappings today, but binary loaders could start making use of this new feature to map binaries and libraries in a more secure fashion. There is other pending pkeys work that offers more high level system call APIs to manage protection keys - but those are not part of this pull request. Right now there's a Kconfig that controls this feature (CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS) that is default enabled (like most x86 CPU feature enablement code that has no runtime overhead), but it's not user-configurable at the moment. If there's any serious problem with this then we can make it configurable and/or flip the default" * 'mm-pkeys-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (38 commits) x86/mm/pkeys: Fix mismerge of protection keys CPUID bits mm/pkeys: Fix siginfo ABI breakage caused by new u64 field x86/mm/pkeys: Fix access_error() denial of writes to write-only VMA mm/core, x86/mm/pkeys: Add execute-only protection keys support x86/mm/pkeys: Create an x86 arch_calc_vm_prot_bits() for VMA flags x86/mm/pkeys: Allow kernel to modify user pkey rights register x86/fpu: Allow setting of XSAVE state x86/mm: Factor out LDT init from context init mm/core, x86/mm/pkeys: Add arch_validate_pkey() mm/core, arch, powerpc: Pass a protection key in to calc_vm_flag_bits() x86/mm/pkeys: Actually enable Memory Protection Keys in the CPU x86/mm/pkeys: Add Kconfig prompt to existing config option x86/mm/pkeys: Dump pkey from VMA in /proc/pid/smaps x86/mm/pkeys: Dump PKRU with other kernel registers mm/core, x86/mm/pkeys: Differentiate instruction fetches x86/mm/pkeys: Optimize fault handling in access_error() mm/core: Do not enforce PKEY permissions on remote mm access um, pkeys: Add UML arch_*_access_permitted() methods mm/gup, x86/mm/pkeys: Check VMAs and PTEs for protection keys x86/mm/gup: Simplify get_user_pages() PTE bit handling ... |
||
Linus Torvalds
|
24b5e20f11 |
Merge branch 'efi-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull EFI updates from Ingo Molnar: "The main changes are: - Use separate EFI page tables when executing EFI firmware code. This isolates the EFI context from the rest of the kernel, which has security and general robustness advantages. (Matt Fleming) - Run regular UEFI firmware with interrupts enabled. This is already the status quo under other OSs. (Ard Biesheuvel) - Various x86 EFI enhancements, such as the use of non-executable attributes for EFI memory mappings. (Sai Praneeth Prakhya) - Various arm64 UEFI enhancements. (Ard Biesheuvel) - ... various fixes and cleanups. The separate EFI page tables feature got delayed twice already, because it's an intrusive change and we didn't feel confident about it - third time's the charm we hope!" * 'efi-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (37 commits) x86/mm/pat: Fix boot crash when 1GB pages are not supported by the CPU x86/efi: Only map kernel text for EFI mixed mode x86/efi: Map EFI_MEMORY_{XP,RO} memory region bits to EFI page tables x86/mm/pat: Don't implicitly allow _PAGE_RW in kernel_map_pages_in_pgd() efi/arm*: Perform hardware compatibility check efi/arm64: Check for h/w support before booting a >4 KB granular kernel efi/arm: Check for LPAE support before booting a LPAE kernel efi/arm-init: Use read-only early mappings efi/efistub: Prevent __init annotations from being used arm64/vmlinux.lds.S: Handle .init.rodata.xxx and .init.bss sections efi/arm64: Drop __init annotation from handle_kernel_image() x86/mm/pat: Use _PAGE_GLOBAL bit for EFI page table mappings efi/runtime-wrappers: Run UEFI Runtime Services with interrupts enabled efi: Reformat GUID tables to follow the format in UEFI spec efi: Add Persistent Memory type name efi: Add NV memory attribute x86/efi: Show actual ending addresses in efi_print_memmap x86/efi/bgrt: Don't ignore the BGRT if the 'valid' bit is 0 efivars: Use to_efivar_entry efi: Runtime-wrapper: Get rid of the rtc_lock spinlock ... |
||
Linus Torvalds
|
46e595a17d |
ARM: SoC driver updates for v4.6
Driver updates for ARM SoCs, these contain various things that touch the drivers/ directory but got merged through arm-soc for practical reasons: - Rockchip rk3368 gains power domain support - Small updates for the ARM spmi driver - The Atmel PMC driver saw a larger rework, touching both arch/arm/mach-at91 and drivers/clk/at91 - All reset controller driver changes alway get merged through arm-soc, though this time the largest change is the addition of a MIPS pistachio reset driver - One bugfix for the NXP (formerly Freescale) i.MX weim bus driver -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIVAwUAVu67OmCrR//JCVInAQJ64hAAqNemdAMloJhh8mk4O74egd/XNE8GLK3v gGefpZNi0TC8u/GWMhU1aFCElaCmbNlL0IlqaRrU/vydOmQcZYht7Fg3bAm4r3ck TlKijGTJap4sdHhxSeui+7bhaBToxcklQTdcrKFgOwsype7CAWJCl5otIC/GHO5L fn4QSjQbqr5kqH1XfuVIphj/fJjDKRRze5D7zn0nExq46OyoYyjc2lm/QkLgeeS2 vDpzOULYXcjf5GfsPknCJGGjenISD7cIAwZukGvJXFh8WrXkEPZZ7B7bBI/8ZeBU MkdWvOm9fHEWpIPnuTcLeQNlfdzQ0Z0zijgJqnXjwSYXK2Es1UKEoIFvZUyGA9zG uyLtddFcKbP4QBDUKVMbyYM6x4Cj7LO96dB2pe8iH5rvnoLS32EjJ/4glnbPQFB7 75JKb7eU1pijoy9c3x/G10vINHzbPjyUN3sYTFKMomPFzEF4OVQ3GDclSuD7jjDr GnqmAqlj29+qGU6iQBBHp9TfLTxwrs/4MKPEZ+tTGvtINnzOpLGA3TUnji7nVFQc BYy3qaEvg9MfHI3uXhAl2L4CGCVvHfqFs5B7giZfAkbbcTNAHs9PkZ6gMYH+GG3p tEbTf/dMHmkkqttSz4f7LZS7D56cSfm3cD8kFCRJPLKifmGAk3w1HZ7JoCXdjr1K 22HSKRMxlhU= =HS4G -----END PGP SIGNATURE----- Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Arnd Bergmann: "Driver updates for ARM SoCs, these contain various things that touch the drivers/ directory but got merged through arm-soc for practical reasons: - Rockchip rk3368 gains power domain support - Small updates for the ARM spmi driver - The Atmel PMC driver saw a larger rework, touching both arch/arm/mach-at91 and drivers/clk/at91 - All reset controller driver changes alway get merged through arm-soc, though this time the largest change is the addition of a MIPS pistachio reset driver - One bugfix for the NXP (formerly Freescale) i.MX weim bus driver" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (43 commits) bus: imx-weim: Take the 'status' property value into account clk: at91: remove useless includes clk: at91: pmc: remove useless capacities handling clk: at91: pmc: drop at91_pmc_base usb: gadget: atmel: access the PMC using regmap ARM: at91: remove useless includes and function prototypes ARM: at91: pm: move idle functions to pm.c ARM: at91: pm: find and remap the pmc ARM: at91: pm: simply call at91_pm_init clk: at91: pmc: move pmc structures to C file clk: at91: pmc: merge at91_pmc_init in atmel_pmc_probe clk: at91: remove IRQ handling and use polling clk: at91: make use of syscon/regmap internally clk: at91: make use of syscon to share PMC registers in several drivers hwmon: (scpi) add energy meter support firmware: arm_scpi: add support for 64-bit sensor values firmware: arm_scpi: decrease Tx timeout to 20ms firmware: arm_scpi: fix send_message and sensor_get_value for big-endian reset: sti: Make reset_control_ops const reset: zynq: Make reset_control_ops const ... |
||
Linus Torvalds
|
915c56bc01 |
ARM: 64-bit DT updates for v4.6
The arm64 device tree changes make up an increasing portion of the overall changes, so they are kept separate from the 32-bit devicetree changes and from the other arm64 updates. Newly added SoCs and boards are: - 96Boards Husky board - AMD Overdrive board - Amlogic S905 SoC and related Tronsmart boxes - Annapurna Labs Alpine family and development board - Broadcom Vulcan servers - Broadcom Northstar 2 SoC - Marvell Armada 3700 family and development board - Qualcomm MSM8996 SoC Additional devices are enabled for existing platforms from Applied Micro, Hisilicon, Mediatek, Qualcomm, and Renesas and there are a couple of other updates for Rockchip, Xilinx and NXP/Freescale. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIUAwUAVu67Q2CrR//JCVInAQL0ng/47UBpXwVw1V5zm9lUIA1oluo/cKgFyGsi G8wOzoMwmZocDKXC7mONS6c6AjeqszTNQ8V2j2ieU7G7S+moi8SnTcc8pJKD26HL KvsxGtnfKXFAfZkJ8iERxHmZojHN93EF01P3R+pEIlKzFs+8Mx66VbUp2mVEMrHR wClzoW1n49kdpQhGuGeryFufAgUd/OKG2VDosCDR5hpoTNYWenuIQB5VHtiow08U 9SVEBUW6YxDV3hiyt4Vd5FvrPT/PJEPchmnscgC8L/sVD57XeH5h68GE4mDplc68 QxzFqDAHuInPS/p6h9zFALawh8lXvu+ERTt6XZqGxzvhEkifx6grOBVCaVSbfpct JLzFUZKcGXDLekVq0GQWj7ZCQnWeRSdtIGBtoaEzLzjZ0aGeSeN0nuldWFRx3Eml 3eTpHsyLOtjsSjZcdSWtzSBbN2OuymvSKfjdHfqANbpsUYZREI/HXNg/WLCzhsbr o7VQig/dkSQ+Od39omKk1AP5adLpCdUc0nm2omdUJRVEuJ0l9fLp3Td4nZTtOPle Vbf5lYHGAMCrgzPEJnMxtUb1XlstQdij2FEYTeqUqHyZ1kZNaGOaWWgXNW6ORyn9 eOav61eWwZ0qvppaQKzv7rIV5qtP5Zg3kLvsNvQpWhr3ev14n0rvFu1RAy/yz2gR zMtRVagq/w== =izw3 -----END PGP SIGNATURE----- Merge tag 'armsoc-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM 64-bit DT updates from Arnd Bergmann: "The arm64 device tree changes make up an increasing portion of the overall changes, so they are kept separate from the 32-bit devicetree changes and from the other arm64 updates. Newly added SoCs and boards are: - 96Boards Husky board - AMD Overdrive board - Amlogic S905 SoC and related Tronsmart boxes - Annapurna Labs Alpine family and development board - Broadcom Vulcan servers - Broadcom Northstar 2 SoC - Marvell Armada 3700 family and development board - Qualcomm MSM8996 SoC Additional devices are enabled for existing platforms from Applied Micro, Hisilicon, Mediatek, Qualcomm, and Renesas and there are a couple of other updates for Rockchip, Xilinx and NXP/Freescale" * tag 'armsoc-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (102 commits) ARM64: dts: amlogic: Add Tronsmart Vega S95 configs Documentation: devicetree: amlogic: Document Tronsmart Vega S95 boards ARM64: dts: Prepare configs for Amlogic Meson GXBaby Documentation: devicetree: amlogic: Document Meson GXBaby devicetree: bindings: Add vendor prefix for Tronsmart arm64: dts: qcom: Fix MPP's function used for LED control arm64: dts: alpine: add the MSIX node in the Alpine v2 dtsi arm64: dts: add the Alpine v2 EVP arm64: dts: marvell: re-order Device Tree nodes for Armada AP806 arm64: dts: marvell: update Armada AP806 clock description arm64: dts: marvell: add Device Tree files for Armada 7K/8K arm64: dts: apm: Add DT node for X-Gene v2 SLIMpro Mailbox I2C Driver arm64: dts: apm: Mailbox device tree node for APM X-Gene v2 platform. arm64: dts: apm: Add DT node for X-Gene v1 SLIMpro Mailbox I2C Driver arm64: dts: apm: mailbox device tree node for APM X-Gene platform. arm64: dts: apm: Update GPIO to control power-off on X-Gene v2 platforms arm64: dts: apm: Update GPIO standby controller DT node for X-Gene v2 platforms arm64: dts: apm: Update GPIO to control power-off on X-Gene v1 platforms arm64: dts: salvator-x: enable USB 2.0 Host of channel 1 and 2 arm64: dts: salvator-x: enable usb2_phy of channel 1 and 2 ... |
||
Linus Torvalds
|
5a6b7e53d0 |
ARM: DT updates for v4.6
These are all the updates to device tree files for 32-bit platforms, plus a couple of related 64-bit updates: New SoC support: - Allwinner A83T - Axis Artpec-6 SoC - Mediatek MT7623 SoC - TI Keystone K2G SoC - ST Microelectronics stm32f469 New board or machine support: - ARM Juno R2 - Buffalo Linkstation LS-QVL and LS-GL - Cubietruck plus - D-Link DIR-885L - DT support for ARM RealView PB1176 and PB11MPCore - Google Nexus 7 - Homlet v2 - Itead Ibox - Lamobo R1 - LG Optimus Black - Logicpd dm3730 - Raspberry Pi Model A Other changes include - Lots of updates for Qualcomm APQ8064, MSM8974 and others - Improved support for Nokia N900 and other OMAP machines - Common clk support for lpc32xx - HDLCD display on ARM - Improved stm32f429 support - Improved Renesas device support, r8a779x and others - Lots of Rockchip updates - Samsung cleanups - ADC support for Atmel SAMA5D2 - BCM2835 (Raspberry Pi) improvements - Broadcom Northstar Plus enhancements - OMAP GPMC rework - Several improvements for Atmel SAMA5D2 / Xplained - Global change to remove inofficial "arm,amba-bus" compatible string -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIVAwUAVu67PmCrR//JCVInAQIZlA//UV7DK8tHNvLCuHBX8MnW5xxljUWFCoFp Zsi9LJj+KDIE+rpY65n75+il+rT1ZcgaITzH+Qvaq75f51ZwW7HY5jHiPYsINa80 oMtbdWlnpNIH48jD5yMKaDTE8md7lZ8tgA//6aw1doDx2LYX4D1QRG6XI1OC6E62 OjlzXkTTe50Aowi6aMQz4PZQM89m09FT0aw/Qsokh0fcW8oXhXcJSlFgLF/tZUYs VU4oWshUX2/VW3ShXlAJdrItpdDIogwZtDS7xKXmk6AHfapLb7s4HuEOInqbeOa7 QWTjtoVj6ZHyeVptyn6kj5+xOdL4bXAT4Kg2TctF1iv0I6XG8CKflNqOJt2wLR1M DP0VQXK0TmKCeI+vbRhniLRP7EPYp4N9KFAe6M6aVP3nKYX81EqWdtPjuwp7GxAC sIGad2ocynKW4Eb4xOD2/5EwzkhwHv7SPQTCyCyQo8ILGN5MOSBZJOC1kXATTtbq u7LbOLyFMeWPJFYZyPxe79MwiX0dfJekrZYQ1tYL3MEQqQNmbY6+r+6QLMhT+iSj SE1oBaAReOuZUquiBEt398OvdfQ/n+F5BasKKCojXuhueNO3+rY7mT5X/vmOs2eh CUpfl766CixaZmF6p8es1Qeu64ASODbPiOw3Dv5Cgwcbfy/C3b3ccty0zazlOaNJ Sm6VXU3RavA= =RLUc -----END PGP SIGNATURE----- Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM DT updates from Arnd Bergmann: "These are all the updates to device tree files for 32-bit platforms, plus a couple of related 64-bit updates: New SoC support: - Allwinner A83T - Axis Artpec-6 SoC - Mediatek MT7623 SoC - TI Keystone K2G SoC - ST Microelectronics stm32f469 New board or machine support: - ARM Juno R2 - Buffalo Linkstation LS-QVL and LS-GL - Cubietruck plus - D-Link DIR-885L - DT support for ARM RealView PB1176 and PB11MPCore - Google Nexus 7 - Homlet v2 - Itead Ibox - Lamobo R1 - LG Optimus Black - Logicpd dm3730 - Raspberry Pi Model A Other changes include - Lots of updates for Qualcomm APQ8064, MSM8974 and others - Improved support for Nokia N900 and other OMAP machines - Common clk support for lpc32xx - HDLCD display on ARM - Improved stm32f429 support - Improved Renesas device support, r8a779x and others - Lots of Rockchip updates - Samsung cleanups - ADC support for Atmel SAMA5D2 - BCM2835 (Raspberry Pi) improvements - Broadcom Northstar Plus enhancements - OMAP GPMC rework - Several improvements for Atmel SAMA5D2 / Xplained - Global change to remove inofficial "arm,amba-bus" compatible string" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (350 commits) ARM, ARM64: dts: drop "arm,amba-bus" in favor of "simple-bus" ARM: dts: artpec: dual-license on artpec6.dtsi ARM: dts: ux500: add synaptics RMI4 for Ux500 TVK DT arm64: dts: juno/vexpress: fix node name unit-address presence warnings arm64: dts: foundation-v8: add SBSA Generic Watchdog device node ARM: dts: at91: sama5d2 Xplained: add leds node ARM: dts: at91: sama5d2 Xplained: add user push button ARM: dts: at91: sama5d2 Xplained: set pin muxing for usb gadget and usb host ARM: dts: stm32f429: Enable Ethernet on Eval board ARM: dts: omap3-sniper: TWL4030 keypad support Revert "ARM: dts: DRA7: Add dt nodes for PWMSS" ARM: dts: dm814x: dra62x: Disable wait pin monitoring for NAND ARM: dts: dm814x: dra62x: Fix NAND device nodes ARM: dts: stm32f429: Add Ethernet support ARM: dts: stm32f429: Add system config bank node ARM: dts: at91: sama5d2: add nand0 and nfc0 nodes ARM: dts: at91: sama5d2: add dma properties to UART nodes ARM: dts: at91: sama5d2 Xplained: Correct the macb irq pinctrl node ARM: dts: exynos: Don't overheat the Odroid XU3-Lite on high load ARM: dts: exynos: Add cooling levels for Exynos5422/5800 CPUs ... |
||
Linus Torvalds
|
8c6d4082fc |
ARM: SoC 64-bit changes for v4.6
Here's our branch of ARM64 contents for this merge window, now containing all ARM64 changes other than device tree files. - Various new platforms get added - Allwinner A64 SoC - Annapurna Labs Alpine SoCs - Broadcom Vulcan - Marvell Armada 3700 SoCs - Amlogic S905 - Various defconfig changes to enable platform specific drivers This branch includes the clk git tree to resolve a build-time dependency. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIVAwUAVu67KmCrR//JCVInAQKo+xAAnyjdtGviIade2NX+8dpkBvFVkaZMJVK6 l4DEhM/zYLYToAaP8NHBq14NmcM0dVUF58yop5FG2oJyoJSnFYdeaSYgJG3P+pO9 gza5Hh5FKy/yjbsO589d0rzJrK9dTYI9xAViSNei9JU6nKdQD7PIwP3DnzSMKIzW sekOJArAT9r2L51XlbBd0oo1GGGvH9tQW2ImBs7l5RXnuXxcudIlwpBwSNRg1b9C 89V3vPdUse6j6jemxk4ZVZud7z9HqDGqBxUx1TC+tA0dWxIymMpQneLqM+/CNgdC fmhg1sYKsOMxHSiJc4zYpmjDU6miaq1c+/wQMbOoOR6hdKGZupd4cclepzNswc/M wukuxrcMwdXRaSSvPGrefKWGA6OppFl3rbporhoOG0QUaOHzm63Acjppq3/hxx5h Ffawp/wO8AmKEQDmA6bj/RecoWJ1Z3aEs3AWThqKyJ2I5gvRdO6OkziTVl3S4x9v tPL+pe/i7NuHw0rviYGYuE/n8LS48a7cGoRkdkDVHHGi+A/ArfoqVbY0HG3YiIy3 xMebvSSAxUjlNtO2AOrLjKAHr15ieuJggny5N8LlfdKx08RF15wd2eaom0yr8Vc/ mqXTw4wX2KuuYCW3GatJwqYu5Av8wuY1Ma1pYIpEUgq4nY4OId0izSjn0oVlivYx /po9snlvFpc= =fO+Q -----END PGP SIGNATURE----- Merge tag 'armsoc-arm64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC 64-bit changes from Arnd Bergmann: "Here's our branch of ARM64 contents for this merge window, now containing all ARM64 changes other than device tree files. - Various new platforms get added: * Allwinner A64 SoC * Annapurna Labs Alpine SoCs * Broadcom Vulcan * Marvell Armada 3700 SoCs * Amlogic S905 - Various defconfig changes to enable platform specific drivers This branch includes the clk git tree to resolve a build-time dependency" * tag 'armsoc-arm64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (48 commits) arm64: defconfig: Increase MMC_BLOCK_MINORS to 16 arm64: defconfig: Add Qualcomm sdhci and restart functionality ARM64: Enable Amlogic Meson GXBaby platform arm64: defconfig: Enable Samsung MFD and related configs arm64: alpine: select the Alpine MSI controller driver arm64: defconfig: enable the Alpine family arm64: add Alpine SoC family arm64: defconfig: Enable exynos thermal config arm64: add defconfig options for Allwinner SoCs arm64: defconfig: Enable DesignWare APB GPIO controller arm64: defconfig: Add Renesas R-Car Gen3 USB 2.0 phy driver support arm64: EXYNOS: Consolidate ARCH_EXYNOS7 symbol into ARCH_EXYNOS clk: samsung: Don't build ARMv8 clock drivers on ARMv7 MAINTAINERS: Add entry for Broadcom Vulcan SoC arm64: cputype info for Broadcom Vulcan arm64: Broadcom Vulcan support arm64: defconfig: Add Broadcom Vulcan to defconfig arm64: update ARCH_MVEBU for Marvell Armada 7K/8K support Documentation: arm: add Marvell Armada 7K and 8K families Documentation: arm: add link to Armada 38x Functional Spec ... |
||
Linus Torvalds
|
33b3d2e88c |
ARM: SoC platform updates for v4.6
Newly added support for additional SoCs: - Axis Artpec-6 SoC family - Allwinner A83T SoC - Mediatek MT7623 - NXP i.MX6QP SoC - ST Microelectronics stm32f469 microcontroller New features: - SMP support for Mediatek mt2701 - Big-endian support for NXP i.MX - DaVinci now uses the new DMA engine dma_slave_map - OMAP now uses the new DMA engine dma_slave_map - earlyprintk support for palmchip uart on mach-tango - delay timer support for orion Other: - Exynos PMU driver moved out to drivers/soc/ - Various smaller updates for Renesas, Xilinx, PXA, AT91, OMAP, uniphier -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIVAwUAVu68DGCrR//JCVInAQIHVQ//Wblms+NKj3aKh6m2Sscs/YkSbFaQ4sY2 rNyfxLIYsLXkth1kbdHRFSMyL68Ym+xutErgw/3HQPB2D1YtYJE3VJ/y8AU92SU3 oHyQIty+atB8d8zBbtlkWmat94NIfYf0I8PQETreGb1LMaJqAf0mDEDAyorTLZcZ UtQ817Ihn7urqwdTJpTO58V41RmY/vflbHI5T6bIjUJn6fF1e/7+VqtMIfq5sjJ6 0EPEQdu8s5AJ7gcGlGi9I5gAtSnWSA/9phAxul9P8/HrMpUWIxreSEAy8FY7W14F 4TON3sQrnw7nyA72U80KGIXhgLy7SbEmHcSqyy4YJK3ycdk6VYk0CBO7nWVYAiD1 knLisOH6jwe0LIj9WXiRR+Y2Q53pXN8SF77pLDahSnvuShnYEjEH5uELHtxe7Vxh gn+NH1rDkRTgdYgt4RWlVyUoLkddQWzLb1m4QyQlvxtTR25cJJayXdVX2MRrNPF5 c1zRa9HH+b8LJQIMdWfo/NoHhHtftkkGGsqHAAaypZqdpyk0j2HpJYk5ecPR4f5C /8o/h/5xOI9gEzp/DVYSZ1VAvRqBQGIDfKBXWq6GuoZaF0aN8ISe5IxFn5Yx2F46 fNaxqiNpWmyywl8D+tSWPFK6aE21AXKGi5zIzexZZqy283aDjlUPI+tgF2GKIuKP 3ayYTDeBpLI= =ynNj -----END PGP SIGNATURE----- Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform updates from Arnd Bergmann: "Newly added support for additional SoCs: - Axis Artpec-6 SoC family - Allwinner A83T SoC - Mediatek MT7623 - NXP i.MX6QP SoC - ST Microelectronics stm32f469 microcontroller New features: - SMP support for Mediatek mt2701 - Big-endian support for NXP i.MX - DaVinci now uses the new DMA engine dma_slave_map - OMAP now uses the new DMA engine dma_slave_map - earlyprintk support for palmchip uart on mach-tango - delay timer support for orion Other: - Exynos PMU driver moved out to drivers/soc/ - Various smaller updates for Renesas, Xilinx, PXA, AT91, OMAP, uniphier" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (83 commits) ARM: uniphier: rework SMP code to support new System Bus binding ARM: uniphier: add missing of_node_put() ARM: at91: avoid defining CONFIG_* symbols in source code ARM: DRA7: hwmod: Add data for eDMA tpcc, tptc0, tptc1 ARM: imx: Make reset_control_ops const ARM: imx: Do L2 errata only if the L2 cache isn't enabled ARM: imx: select ARM_CPU_SUSPEND only for imx6 dmaengine: pxa_dma: fix the maximum requestor line ARM: alpine: select the Alpine MSI controller driver ARM: pxa: add the number of DMA requestor lines dmaengine: mmp-pdma: add number of requestors dma: mmp_pdma: Add the #dma-requests DT property documentation ARM: OMAP2+: Add rtc hwmod configuration for ti81xx ARM: s3c24xx: Avoid warning for inb/outb ARM: zynq: Move early printk virtual address to vmalloc area ARM: DRA7: hwmod: Add custom reset handler for PCIeSS ARM: SAMSUNG: Remove unused register offset definition ARM: EXYNOS: Cleanup header files inclusion drivers: soc: samsung: Enable COMPILE_TEST MAINTAINERS: Add maintainers entry for drivers/soc/samsung ... |
||
Linus Torvalds
|
2b2f72d8ce |
Merge branch 'mailbox-for-next' of git://git.linaro.org/landing-teams/working/fujitsu/integration
Pull mailbox updates from Jassi Brar: - mailbox bindings and drivers for * APM X-Gene * Hisilicon Hi6220 * Rockchip RK3368 platforms - minor fixes to the above three drivers. - misc cleanups of mailbox-test driver. * 'mailbox-for-next' of git://git.linaro.org/landing-teams/working/fujitsu/integration: mailbox: rockchip: avoid 64-bit division mailbox: rockchip: Add Rockchip mailbox driver dt-bindings: rockchip-mailbox: Add mailbox controller document on Rockchip SoCs mailbox/xgene-slimpro: Checking for IS_ERR instead of NULL mailbox: Hi6220: add mailbox driver dt-bindings: mailbox: Document Hi6220 mailbox driver mailbox: mailbox-test: add support for separate tx/rx buffer with single channel mailbox: mailbox-test: use print_hex_dump_bytes to allow dynamic printk mailbox: mailbox-test: fix the compatible string mailbox: mailbox-test: rename driver as generic test driver Documentation: mailbox: Add APM X-Gene SLIMpro mailbox dts documentation mailbox: Add support for APM X-Gene platform mailbox driver |
||
Linus Torvalds
|
1e75a9f34a |
Merge git://www.linux-watchdog.org/linux-watchdog
Pull watchdog updates from Wim Van Sebroeck: - new drivers for: NI 903x/913x watchdog driver, WinSystems EBC-C384 watchdog timer and ARM SBSA watchdog driver - Support for NCT6102D devices - Improvements of the generic watchdog framework (improve restart handler, make set_timeout optional, introduce infrastructure triggered keepalives, ... - improvements on the pnx4008 watchdog driver - several smaller fixes and improvements * git://www.linux-watchdog.org/linux-watchdog: (28 commits) watchdog: Ensure that wdd is not dereferenced if NULL watchdog: imx2: Convert to use infrastructure triggered keepalives watchdog: dw_wdt: Convert to use watchdog infrastructure watchdog: Add support for minimum time between heartbeats watchdog: Make stop function optional watchdog: Introduce WDOG_HW_RUNNING flag watchdog: Introduce hardware maximum heartbeat in watchdog core watchdog: Make set_timeout function optional arm: lpc32xx: remove restart handler arm: lpc32xx: phy3250 remove restart hook watchdog: pnx4008: restart: support "cmd" from userspace watchdog: pnx4008: add support for soft reset watchdog: pnx4008: add restart handler watchdog: pnx4008: update logging during power-on watchdog: tangox_wdt: test clock rate to avoid division by 0 watchdog: atlas7_wdt: test clock rate to avoid division by 0 watchdog: s3c2410_wdt: Add max and min timeout values Watchdog: introduce ARM SBSA watchdog driver Documentation: add sbsa-gwdt driver documentation watchdog: Add watchdog timer support for the WinSystems EBC-C384 ... |
||
Linus Torvalds
|
1c3d770043 |
IEEE 1394 subsystem patches:
- move away from outmoded timekeeping API, - error reporting fix, - documentation bits. -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iQIcBAABCAAGBQJW7DfWAAoJEHnzb7JUXXnQMOQP/3WiFbsbhfnVTiReAaZIS4Ah 6b6QManzhlTULQAqL3Zvs175NAju3pfrVgmQbM/0osfffWwtdLW412UXfPxv8LK3 8Xdk5htDlw9b603hZVkHPWmAgx65m3YHfIYzzNVNrk1J3x77AHN06U5tcl/Jpmj4 jb4DTrc8CBYIupGAN8CiWch4xRpzL6h9aomsbz4y8ZiMMR4XZ5fTUZ8M62mRGK01 0RWKa84MnXSAcW88y0PapizO16+QeD+4jq7gDtlkCyZ0N4qQAlynZFoU3WH/AA6K 9P3xgi/PhPQ5rn7GJx/CRV+P7dnkRdKR9jsKd2wm4w6iJrJ8vHSUdhcedxwdZOfS pvjyQaFgsCHF4jknnrj0rRVAdw2oe/u4Hlpx7LVpZGg+hCfyuY5hSjJ8nMYMvCaz SnSLW9n3gQzzazOejWq+atBsDX01ZZko9FE1YNSgqq89Dwk2K94qUO6ipiFnh/3d kUSj0ST7q+rIACG8hFDDZHY+FDG0wJYoIabijHpjD2pmg3ySVWcRvp9b1vDaBzX9 JCMElZ7szxUbeqDX+Jjs34tN9ClNPOVQgHO9e1X4qzKJlduIy+MDfvGmIqanToDv E4cm5ujhb7fPTgiTyltVlBnRmseuVwoTYuKh+ouG/Gve6XQg6XgsyGn1TSd7WVms 2q8vkOk3Zj7OqUqWtE8H =bGZr -----END PGP SIGNATURE----- Merge tag 'firewire-updates' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394 Pull firewire updates from Stefan Richter: "IEEE 1394 subsystem patches: - move away from outmoded timekeeping API - error reporting fix - documentation bits" * tag 'firewire-updates' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394: firewire: ABI documentation: libhinawa uses firewire-cdev firewire: ABI documentation: jujuutils were renamed to linux-firewire-utils firewire: ohci: propagate return code from soft_reset to probe and resume firewire: nosy: Replace timeval with timespec64 |
||
Linus Torvalds
|
de06dbfa78 |
Merge branch 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm
Pull ARM updates from Russell King: "Another mixture of changes this time around: - Split XIP linker file from main linker file to make it more maintainable, and various XIP fixes, and clean up a resulting macro. - Decompressor cleanups from Masahiro Yamada - Avoid printing an error for a missing L2 cache - Remove some duplicated symbols in System.map, and move vectors/stubs back into kernel VMA - Various low priority fixes from Arnd - Updates to allow bus match functions to return negative errno values, touching some drivers and the driver core. Greg has acked these changes. - Virtualisation platform udpates form Jean-Philippe Brucker. - Security enhancements from Kees Cook - Rework some Kconfig dependencies and move PSCI idle management code out of arch/arm into drivers/firmware/psci.c - ARM DMA mapping updates, touching media, acked by Mauro. - Fix places in ARM code which should be using virt_to_idmap() so that Keystone2 can work. - Fix Marvell Tauros2 to work again with non-DT boots. - Provide a delay timer for ARM Orion platforms" * 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: (45 commits) ARM: 8546/1: dma-mapping: refactor to fix coherent+cma+gfp=0 ARM: 8547/1: dma-mapping: store buffer information ARM: 8543/1: decompressor: rename suffix_y to compress-y ARM: 8542/1: decompressor: merge piggy.*.S and simplify Makefile ARM: 8541/1: decompressor: drop redundant FORCE in Makefile ARM: 8540/1: decompressor: use clean-files instead of extra-y to clean files ARM: 8539/1: decompressor: drop more unneeded assignments to "targets" ARM: 8538/1: decompressor: drop unneeded assignments to "targets" ARM: 8532/1: uncompress: mark putc as inline ARM: 8531/1: turn init_new_context into an inline function ARM: 8530/1: remove VIRT_TO_BUS ARM: 8537/1: drop unused DEBUG_RODATA from XIP_KERNEL ARM: 8536/1: mm: hide __start_rodata_section_aligned for non-debug builds ARM: 8535/1: mm: DEBUG_RODATA makes no sense with XIP_KERNEL ARM: 8534/1: virt: fix hyp-stub build for pre-ARMv7 CPUs ARM: make the physical-relative calculation more obvious ARM: 8512/1: proc-v7.S: Adjust stack address when XIP_KERNEL ARM: 8411/1: Add default SPARSEMEM settings ARM: 8503/1: clk_register_clkdev: remove format string interface ARM: 8529/1: remove 'i' and 'zi' targets ... |
||
Linus Torvalds
|
b31a3bc3db |
arch/sh changes for 4.6. They include minor cleanups, a fix for a
crash that likely affects all sh models with MMU, and introduction of a framework for boards described by device tree, which sets the stage for future J2 support. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.12 (GNU/Linux) iQEcBAABAgAGBQJW7IIaAAoJELcQ+SIFb8HaDMYH/1tb4FhXGJyVZed7LlK/cpRm wgdl30DPvi8V595GX6fnLS7XKvmekrH2LN0rUHS59H6W56SBu/BdsjH/DfrlId5I Dc19cZYTOFuhwKa75egyEeYrUqkdJMzyDx7maAZSN4BvQ0WL83x4UJwE24vsswW8 h/7s5xFr9XZZ82HqJ6FDyR9beE7RePCnshNVKqTI7q15ht9SFNeJ35bUQxIwCXYl 85eEU0EbPKF15E96eHo1YkAswyohshSMC5474wNwwhpsGmXzc71EtbPCvSGwMlxh 1krA0kUrZAp/3S6/2qENosQqcK0mLhK2ibrNUZGgKc5J/iLwLzfCKxULVIt1IAw= =yg5n -----END PGP SIGNATURE----- Merge tag 'tag-sh-for-4.6' of git://git.libc.org/linux-sh Pull arch/sh updates from Rich Felker: "This includes minor cleanups, a fix for a crash that likely affects all sh models with MMU, and introduction of a framework for boards described by device tree, which sets the stage for future J2 support" * tag 'tag-sh-for-4.6' of git://git.libc.org/linux-sh: sched/preempt, sh: kmap_coherent relies on disabled preemption sh: add SMP method selection to device tree pseudo-board sh: add device tree support and generic board using device tree sh: remove arch-specific localtimer and use generic one sh: make MMU-specific SMP code conditional on CONFIG_MMU sh: provide unified syscall trap compatible with all SH models sh: New gcc support sh: Disable trace for kernel uncompressing. sh: Use generic clkdev.h header |
||
Linus Torvalds
|
d5e2d00898 |
powerpc updates for 4.6
Highlights: - Restructure Linux PTE on Book3S/64 to Radix format from Paul Mackerras - Book3s 64 MMU cleanup in preparation for Radix MMU from Aneesh Kumar K.V - Add POWER9 cputable entry from Michael Neuling - FPU/Altivec/VSX save/restore optimisations from Cyril Bur - Add support for new ftrace ABI on ppc64le from Torsten Duwe Various cleanups & minor fixes from: - Adam Buchbinder, Andrew Donnellan, Balbir Singh, Christophe Leroy, Cyril Bur, Luis Henriques, Madhavan Srinivasan, Pan Xinhui, Russell Currey, Sukadev Bhattiprolu, Suraj Jitindar Singh. General: - atomics: Allow architectures to define their own __atomic_op_* helpers from Boqun Feng - Implement atomic{, 64}_*_return_* variants and acquire/release/relaxed variants for (cmp)xchg from Boqun Feng - Add powernv_defconfig from Jeremy Kerr - Fix BUG_ON() reporting in real mode from Balbir Singh - Add xmon command to dump OPAL msglog from Andrew Donnellan - Add xmon command to dump process/task similar to ps(1) from Douglas Miller - Clean up memory hotplug failure paths from David Gibson pci/eeh: - Redesign SR-IOV on PowerNV to give absolute isolation between VFs from Wei Yang. - EEH Support for SRIOV VFs from Wei Yang and Gavin Shan. - PCI/IOV: Rename and export virtfn_{add, remove} from Wei Yang - PCI: Add pcibios_bus_add_device() weak function from Wei Yang - MAINTAINERS: Update EEH details and maintainership from Russell Currey cxl: - Support added to the CXL driver for running on both bare-metal and hypervisor systems, from Christophe Lombard and Frederic Barrat. - Ignore probes for virtual afu pci devices from Vaibhav Jain perf: - Export Power8 generic and cache events to sysfs from Sukadev Bhattiprolu - hv-24x7: Fix usage with chip events, display change in counter values, display domain indices in sysfs, eliminate domain suffix in event names, from Sukadev Bhattiprolu Freescale: - Updates from Scott: "Highlights include 8xx optimizations, 32-bit checksum optimizations, 86xx consolidation, e5500/e6500 cpu hotplug, more fman and other dt bits, and minor fixes/cleanup." -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJW69OrAAoJEFHr6jzI4aWAe5EQAJw/hE6WBQc6a7Tj70AnXOqR qk/m5pZjuTwQxfBteIvHR1pE5eXdlvtAjcD254LVkFkAbIn19W/h2k0VX/nlee7P n/VRHRifjtGmukqHrPYJJ7ua9mNlY7pxh3leGSixBFASnSWqMxNNNziNQtSTcuCs TjHiw6NkZ/kzeunA4bAfE4yHVUZjmL74oiS9JbLyaVHqoW4fqWLlh26AKo2yYMZI qPicBBG4HBi3FGvoexnKxlJNdcV4HO7LzDjJmCSfUKYCJi+Pw19T5qmhso0q0qVz vHg/A8HNeG4Hn83pNVmLeQSAIQRZ3DvTtcLgbjPo+TVwm/hzrRRBWipTeOVbkLW8 2bcOXT4t7LWUq15EAJ1LYgYZGzcLrfRfUeOcuQ1TWd3+PcfY9pE7FmizsxAAfaVe E9j9mpz4XnIqBtWkFHneTIHkQ5OWptyKuZJEaYH0nut4VsP0k8NarkseafGqBPu7 5eG83gbiQbCVixfOgblV9eocJ29JcwpjPAY4CZSGJimShg909FV7WRgZgJkKWrbK dBRco8Jcp4VglGfo2qymv7Uj4KwQoypBREOhiKUvrAsVlDxPfx+bcskhjGu9xGDC xs/+nme0/lKa/wg5K4C3mQ1GAlkMWHI0ojhJjsyODbetup5UbkEu03wjAaTdO9dT Y6ptGm0rYAJluPNlziFj =qkAt -----END PGP SIGNATURE----- Merge tag 'powerpc-4.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: "This was delayed a day or two by some build-breakage on old toolchains which we've now fixed. There's two PCI commits both acked by Bjorn. There's one commit to mm/hugepage.c which is (co)authored by Kirill. Highlights: - Restructure Linux PTE on Book3S/64 to Radix format from Paul Mackerras - Book3s 64 MMU cleanup in preparation for Radix MMU from Aneesh Kumar K.V - Add POWER9 cputable entry from Michael Neuling - FPU/Altivec/VSX save/restore optimisations from Cyril Bur - Add support for new ftrace ABI on ppc64le from Torsten Duwe Various cleanups & minor fixes from: - Adam Buchbinder, Andrew Donnellan, Balbir Singh, Christophe Leroy, Cyril Bur, Luis Henriques, Madhavan Srinivasan, Pan Xinhui, Russell Currey, Sukadev Bhattiprolu, Suraj Jitindar Singh. General: - atomics: Allow architectures to define their own __atomic_op_* helpers from Boqun Feng - Implement atomic{, 64}_*_return_* variants and acquire/release/ relaxed variants for (cmp)xchg from Boqun Feng - Add powernv_defconfig from Jeremy Kerr - Fix BUG_ON() reporting in real mode from Balbir Singh - Add xmon command to dump OPAL msglog from Andrew Donnellan - Add xmon command to dump process/task similar to ps(1) from Douglas Miller - Clean up memory hotplug failure paths from David Gibson pci/eeh: - Redesign SR-IOV on PowerNV to give absolute isolation between VFs from Wei Yang. - EEH Support for SRIOV VFs from Wei Yang and Gavin Shan. - PCI/IOV: Rename and export virtfn_{add, remove} from Wei Yang - PCI: Add pcibios_bus_add_device() weak function from Wei Yang - MAINTAINERS: Update EEH details and maintainership from Russell Currey cxl: - Support added to the CXL driver for running on both bare-metal and hypervisor systems, from Christophe Lombard and Frederic Barrat. - Ignore probes for virtual afu pci devices from Vaibhav Jain perf: - Export Power8 generic and cache events to sysfs from Sukadev Bhattiprolu - hv-24x7: Fix usage with chip events, display change in counter values, display domain indices in sysfs, eliminate domain suffix in event names, from Sukadev Bhattiprolu Freescale: - Updates from Scott: "Highlights include 8xx optimizations, 32-bit checksum optimizations, 86xx consolidation, e5500/e6500 cpu hotplug, more fman and other dt bits, and minor fixes/cleanup" * tag 'powerpc-4.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (179 commits) powerpc: Fix unrecoverable SLB miss during restore_math() powerpc/8xx: Fix do_mtspr_cpu6() build on older compilers powerpc/rcpm: Fix build break when SMP=n powerpc/book3e-64: Use hardcoded mttmr opcode powerpc/fsl/dts: Add "jedec,spi-nor" flash compatible powerpc/T104xRDB: add tdm riser card node to device tree powerpc32: PAGE_EXEC required for inittext powerpc/mpc85xx: Add pcsphy nodes to FManV3 device tree powerpc/mpc85xx: Add MDIO bus muxing support to the board device tree(s) powerpc/86xx: Introduce and use common dtsi powerpc/86xx: Update device tree powerpc/86xx: Move dts files to fsl directory powerpc/86xx: Switch to kconfig fragments approach powerpc/86xx: Update defconfigs powerpc/86xx: Consolidate common platform code powerpc32: Remove one insn in mulhdu powerpc32: small optimisation in flush_icache_range() powerpc: Simplify test in __dma_sync() powerpc32: move xxxxx_dcache_range() functions inline powerpc32: Remove clear_pages() and define clear_page() inline ... |
||
Linus Torvalds
|
31e182363b |
DeviceTree updates for 4.6:
- New tool dtx_diff to diff DT files. - Sync kernel's dtc/libfdt to current dtc repo master. - Fix for reserved memory regions located in highmem. - Document standard unit suffixes for DT properties. - Various DT binding doc updates. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJW7B34AAoJEPr7XbWNvGHDI4QP/0W0s3dvJ4l/TNeu/n1ZN8i7 H4FYNcNGVEPJMaI4gIV+GOnxJ4hTnEX2ftG9MEZCywVHWNCg4IAaIW1wQ52Sufnc Uncc9qO0MMR5Y1Siu/DuLi+ARyPQrke3M/o5xU9XJjSdz9QpnYw1MpMnpAJANomk /8Wjn2jEBHDJrxmJ73nE/CAVu8iFyWHTmt5pDQBoQub2NVuAX6rNcVmpmr0PhDMd 0CKokB+wmLHZEA2R4BBefjLwwKU1WrF/5ytXpsJ01NeZsExagJZz1fQdy3Z6o1Xx PRTukmmNhknatNTJOD8XmLr/SWN2CKNuJK5EOoV2opAvN/fc+mrk95DGKzjh5n64 aCRHzZgKAOYOqdVJKHfJ9hfzgG/zdt4mt1RKhLD+6qZNoSeQSrtikN3DWibPMZQR uHRC9fqalx+W4cBH4jakGYrpsbQOaQFjb6vHY8V/auSB2cx97YVuKCawnSerjWZv 1tu8dqNG0qwt9g0hgA+ycwitulUNSLSvLGp3mxBJXN2ULPHygCw53JUWFQEZhoAa JQqZ7lrUSE+AEp6Cwc0sNn07UMoCAoZKbTaurm2rn2RrKMfnirbf/sdZkc9Hq2pg TIJOJlmJmvheoCl7894iV1l18ooPqldk6h8d9fc6rngaQYkNaV0c9nlaMLTa2Rwi bVztrJItiymIhjIB86Iw =hz7v -----END PGP SIGNATURE----- Merge tag 'devicetree-for-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull DeviceTree updates from Rob Herring: - new tool 'dtx_diff' to diff DT files - sync kernel's dtc/libfdt to current dtc repo master - fix for reserved memory regions located in highmem - document standard unit suffixes for DT properties - various DT binding doc updates * tag 'devicetree-for-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: of: Add vendor prefix for eGalax_eMPIA Technology Inc Input: ads7846: Add description how to use internal reference (ADS7846) ARM: realview: add EB syscon variants to bindings devicetree: bindings: ARM: Use "uV" for micro-volt serial: fsl-imx-uart: Fix typo in fsl,dte-mode description of: add 'const' for of_property_*_string*() parameter '*np' of/unittest: fix infinite loop in of_unittest_destroy_tracked_overlays() of: alloc anywhere from memblock if range not specified kbuild: Allow using host dtc instead of kernel's copy of: resolver: Add missing of_node_get and of_node_put of: Add United Radiant Technology Corporation vendor prefix dt/bindings: add documentation on standard property unit suffixes scripts/dtc: Update to upstream commit b06e55c88b9b ARM: boot: Add an implementation of strnlen for libfdt scripts/dtc: dtx_diff - add info to error message dtc: create tool to diff device trees |
||
Linus Torvalds
|
1200b6809d |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller: "Highlights: 1) Support more Realtek wireless chips, from Jes Sorenson. 2) New BPF types for per-cpu hash and arrap maps, from Alexei Starovoitov. 3) Make several TCP sysctls per-namespace, from Nikolay Borisov. 4) Allow the use of SO_REUSEPORT in order to do per-thread processing of incoming TCP/UDP connections. The muxing can be done using a BPF program which hashes the incoming packet. From Craig Gallek. 5) Add a multiplexer for TCP streams, to provide a messaged based interface. BPF programs can be used to determine the message boundaries. From Tom Herbert. 6) Add 802.1AE MACSEC support, from Sabrina Dubroca. 7) Avoid factorial complexity when taking down an inetdev interface with lots of configured addresses. We were doing things like traversing the entire address less for each address removed, and flushing the entire netfilter conntrack table for every address as well. 8) Add and use SKB bulk free infrastructure, from Jesper Brouer. 9) Allow offloading u32 classifiers to hardware, and implement for ixgbe, from John Fastabend. 10) Allow configuring IRQ coalescing parameters on a per-queue basis, from Kan Liang. 11) Extend ethtool so that larger link mode masks can be supported. From David Decotigny. 12) Introduce devlink, which can be used to configure port link types (ethernet vs Infiniband, etc.), port splitting, and switch device level attributes as a whole. From Jiri Pirko. 13) Hardware offload support for flower classifiers, from Amir Vadai. 14) Add "Local Checksum Offload". Basically, for a tunneled packet the checksum of the outer header is 'constant' (because with the checksum field filled into the inner protocol header, the payload of the outer frame checksums to 'zero'), and we can take advantage of that in various ways. From Edward Cree" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1548 commits) bonding: fix bond_get_stats() net: bcmgenet: fix dma api length mismatch net/mlx4_core: Fix backward compatibility on VFs phy: mdio-thunder: Fix some Kconfig typos lan78xx: add ndo_get_stats64 lan78xx: handle statistics counter rollover RDS: TCP: Remove unused constant RDS: TCP: Add sysctl tunables for sndbuf/rcvbuf on rds-tcp socket net: smc911x: convert pxa dma to dmaengine team: remove duplicate set of flag IFF_MULTICAST bonding: remove duplicate set of flag IFF_MULTICAST net: fix a comment typo ethernet: micrel: fix some error codes ip_tunnels, bpf: define IP_TUNNEL_OPTS_MAX and use it bpf, dst: add and use dst_tclassid helper bpf: make skb->tc_classid also readable net: mvneta: bm: clarify dependencies cls_bpf: reset class and reuse major in da ldmvsw: Checkpatch sunvnet.c and sunvnet_common.c ldmvsw: Add ldmvsw.c driver code ... |
||
Linus Torvalds
|
6b5f04b6cf |
Merge branch 'for-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup updates from Tejun Heo: "cgroup changes for v4.6-rc1. No userland visible behavior changes in this pull request. I'll send out a separate pull request for the addition of cgroup namespace support. - The biggest change is the revamping of cgroup core task migration and controller handling logic. There are quite a few places where controllers and tasks are manipulated. Previously, many of those places implemented custom operations for each specific use case assuming specific starting conditions. While this worked, it makes the code fragile and difficult to follow. The bulk of this pull request restructures these operations so that most related operations are performed through common helpers which implement recursive (subtrees are always processed consistently) and idempotent (they make cgroup hierarchy converge to the target state rather than performing operations assuming specific starting conditions). This makes the code a lot easier to understand, verify and extend. - Implicit controller support is added. This is primarily for using perf_event on the v2 hierarchy so that perf can match cgroup v2 path without requiring the user to do anything special. The kernel portion of perf_event changes is acked but userland changes are still pending review. - cgroup_no_v1= boot parameter added to ease testing cgroup v2 in certain environments. - There is a regression introduced during v4.4 devel cycle where attempts to migrate zombie tasks can mess up internal object management. This was fixed earlier this week and included in this pull request w/ stable cc'd. - Misc non-critical fixes and improvements" * 'for-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (44 commits) cgroup: avoid false positive gcc-6 warning cgroup: ignore css_sets associated with dead cgroups during migration Documentation: cgroup v2: Trivial heading correction. cgroup: implement cgroup_subsys->implicit_on_dfl cgroup: use css_set->mg_dst_cgrp for the migration target cgroup cgroup: make cgroup[_taskset]_migrate() take cgroup_root instead of cgroup cgroup: move migration destination verification out of cgroup_migrate_prepare_dst() cgroup: fix incorrect destination cgroup in cgroup_update_dfl_csses() cgroup: Trivial correction to reflect controller. cgroup: remove stale item in cgroup-v1 document INDEX file. cgroup: update css iteration in cgroup_update_dfl_csses() cgroup: allocate 2x cgrp_cset_links when setting up a new root cgroup: make cgroup_calc_subtree_ss_mask() take @this_ss_mask cgroup: reimplement rebind_subsystems() using cgroup_apply_control() and friends cgroup: use cgroup_apply_enable_control() in cgroup creation path cgroup: combine cgroup_mutex locking and offline css draining cgroup: factor out cgroup_{apply|finalize}_control() from cgroup_subtree_control_write() cgroup: introduce cgroup_{save|propagate|restore}_control() cgroup: make cgroup_drain_offline() and cgroup_apply_control_{disable|enable}() recursive cgroup: factor out cgroup_apply_control_enable() from cgroup_subtree_control_write() ... |
||
Linus Torvalds
|
fcab86add7 |
Merge branch 'for-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata
Pull libata updates from Tejun Heo: - ahci grew runtime power management support so that the controller can be turned off if no devices are attached. - sata_via isn't dead yet. It got hotplug support and more refined workaround for certain WD drives. - Misc cleanups. There's a merge from for-4.5-fixes to avoid confusing conflicts in ahci PCI ID table. * 'for-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: ata: ahci_xgene: dereferencing uninitialized pointer in probe AHCI: Remove obsolete Intel Lewisburg SATA RAID device IDs ata: sata_rcar: Use ARCH_RENESAS sata_via: Implement hotplug for VT6421 sata_via: Apply WD workaround only when needed on VT6421 ahci: Add runtime PM support for the host controller ahci: Add functions to manage runtime PM of AHCI ports ahci: Convert driver to use modern PM hooks ahci: Cache host controller version scsi: Drop runtime PM usage count after host is added scsi: Set request queue runtime PM status back to active on resume block: Add blk_set_runtime_active() ata: ahci_mvebu: add support for Armada 3700 variant libata: fix unbalanced spin_lock_irqsave/spin_unlock_irq() in ata_scsi_park_show() libata: support AHCI on OCTEON platform |
||
Linus Torvalds
|
814a2bf957 |
Merge branch 'akpm' (patches from Andrew)
Merge second patch-bomb from Andrew Morton: - a couple of hotfixes - the rest of MM - a new timer slack control in procfs - a couple of procfs fixes - a few misc things - some printk tweaks - lib/ updates, notably to radix-tree. - add my and Nick Piggin's old userspace radix-tree test harness to tools/testing/radix-tree/. Matthew said it was a godsend during the radix-tree work he did. - a few code-size improvements, switching to __always_inline where gcc screwed up. - partially implement character sets in sscanf * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (118 commits) sscanf: implement basic character sets lib/bug.c: use common WARN helper param: convert some "on"/"off" users to strtobool lib: add "on"/"off" support to kstrtobool lib: update single-char callers of strtobool() lib: move strtobool() to kstrtobool() include/linux/unaligned: force inlining of byteswap operations include/uapi/linux/byteorder, swab: force inlining of some byteswap operations include/asm-generic/atomic-long.h: force inlining of some atomic_long operations usb: common: convert to use match_string() helper ide: hpt366: convert to use match_string() helper ata: hpt366: convert to use match_string() helper power: ab8500: convert to use match_string() helper power: charger_manager: convert to use match_string() helper drm/edid: convert to use match_string() helper pinctrl: convert to use match_string() helper device property: convert to use match_string() helper lib/string: introduce match_string() helper radix-tree tests: add test for radix_tree_iter_next radix-tree tests: add regression3 test ... |
||
Linus Torvalds
|
237045fc3c |
Merge branch 'for-4.6/drivers' of git://git.kernel.dk/linux-block
Pull block driver updates from Jens Axboe: "This is the block driver pull request for this merge window. It sits on top of for-4.6/core, that was just sent out. This contains: - A set of fixes for lightnvm. One from Alan, fixing an overflow, and the rest from the usual suspects, Javier and Matias. - A set of fixes for nbd from Markus and Dan, and a fixup from Arnd for correct usage of the signed 64-bit divider. - A set of bug fixes for the Micron mtip32xx, from Asai. - A fix for the brd discard handling from Bart. - Update the maintainers entry for cciss, since that hardware has transferred ownership. - Three bug fixes for bcache from Eric Wheeler. - Set of fixes for xen-blk{back,front} from Jan and Konrad. - Removal of the cpqarray driver. It has been disabled in Kconfig since 2013, and we were initially scheduled to remove it in 3.15. - Various updates and fixes for NVMe, with the most important being: - Removal of the per-device NVMe thread, replacing that with a watchdog timer instead. From Christoph. - Exposing the namespace WWID through sysfs, from Keith. - Set of cleanups from Ming Lin. - Logging the controller device name instead of the underlying PCI device name, from Sagi. - And a bunch of fixes and optimizations from the usual suspects in this area" * 'for-4.6/drivers' of git://git.kernel.dk/linux-block: (49 commits) NVMe: Expose ns wwid through single sysfs entry drivers:block: cpqarray clean up brd: Fix discard request processing cpqarray: remove it from the kernel cciss: update MAINTAINERS NVMe: Remove unused sq_head read in completion path bcache: fix cache_set_flush() NULL pointer dereference on OOM bcache: cleaned up error handling around register_cache() bcache: fix race of writeback thread starting before complete initialization NVMe: Create discard zero quirk white list nbd: use correct div_s64 helper mtip32xx: remove unneeded variable in mtip_cmd_timeout() lightnvm: generalize rrpc ppa calculations lightnvm: remove struct nvm_dev->total_blocks lightnvm: rename ->nr_pages to ->nr_sects lightnvm: update closed list outside of intr context xen/blback: Fit the important information of the thread in 17 characters lightnvm: fold get bb tbl when using dual/quad plane mode lightnvm: fix up nonsensical configure overrun checking xen-blkback: advertise indirect segment support earlier ... |
||
Linus Torvalds
|
12e7b0a627 |
- New Drivers
- Freescale Touch Screen ADC - X-Powers AXP PMIC with RSB - TI TPS65086 Power Management IC (PMIC) - New Device Support - Supply device PCI IDs for Intel Broxton - Fix-ups - Move to clkdev_create() API; intel_quark_i2c_gpio - Complete re-write of TI's TPS65912 Power Management IC (PMIC) - Remove unnecessary function argument; axp20x - Separate out bus related code; axp20x - Coding Style changes; axp20x - Allow more drivers to be compiled as modules - Work around false positive 'used uninitialised' warning; db8500-prcmu - Bug Fixes - Remove do_div(); fsl-imx25-gcq - Fix driver init when built-in; tps65010 - Fix clock-unregister leak; intel-lpss -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJW6+LJAAoJEFGvii+H/Hdh8kQP/2AKYzPZiw9fhLufsDPvXO5m BVdLYVyA11oQjQk7/Bh+5Rjz8mR5Tfv4uAJUReC3FOIfC/oJNBfBxYJLDV/P8S0/ KaCEaZrpNmecKrsy+TjmFYtcRa51THAdjlWEUKRks/ZBjwP4YsNnh5reWe+wB7bS NFbCNhpXFvYXaDGH8MRhKqdChzZkxi+lgOBcFCKvUYO5/o6g/ZRUD/0TXUItJDwh F8ps5jImHC1imHeRIKWPNrrZqcYasKmObIhvOKMDcwNQPnjrAWq5QuFH4LFhGQ7d 7NMQrBpaGvZyUNBVtL7ZF1xCJ68wAg/ZvZUkKVkax9ubLbSgf6VXYLQEbq+lyFn7 H9A79xPAGN2nC9HsGnCqW0c0qgTOz0DIkbpuaxAGlzBt0zooc19i3cuUd7LX0NG8 ttLaIP1hX6rgvXSFnF0Ihe3iN5A90LTT3ldbn3A8awyS42vEAbUVL9ivRL21BUbB ilSTO2W05a9HlIVe43o2euytaGvDYX7RbL/g3WcJLF1pA01RCIDQAI5usMpgF3bf fJ7cszll0OVTTb5UzbfrNsxAn4oNtbwMIspMMFe17pbmxqh+4oomM3CkuTrMVQfB pA7Uv0jh/mLCV6P52ZEsNiecn0/l0rID8d/DCHjunr2xBWIOrglzZ7n+vLTJMNJ6 72GVBkYRMLbRm+eph1Tp =gTBA -----END PGP SIGNATURE----- Merge tag 'mfd-for-linus-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "New Drivers: - Freescale Touch Screen ADC - X-Powers AXP PMIC with RSB - TI TPS65086 Power Management IC (PMIC) New Device Support: - Supply device PCI IDs for Intel Broxton Fix-ups: - Move to clkdev_create() API; intel_quark_i2c_gpio - Complete re-write of TI's TPS65912 Power Management IC (PMIC) - Remove unnecessary function argument; axp20x - Separate out bus related code; axp20x - Coding Style changes; axp20x - Allow more drivers to be compiled as modules - Work around false positive 'used uninitialised' warning; db8500-prcmu Bug Fixes: - Remove do_div(); fsl-imx25-gcq - Fix driver init when built-in; tps65010 - Fix clock-unregister leak; intel-lpss" * tag 'mfd-for-linus-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (53 commits) mfd: intel-lpss: Pass I2C configuration via properties on BXT mfd: imx6sx: Add PCIe register definitions for iomuxc gpr mfd: ipaq-micro: Use __maybe_unused to hide pm functions mfd: max77686: Add max77802 to I2C device ID table mfd: max77686: Export OF module alias information mfd: max77686: Allow driver to be built as a module mfd: stmpe: Add the proper PWM resources mfd: tps65090: Set regmap config reg counts properly mfd: syscon: Return ENOTSUPP instead of ENOSYS when disabled mfd: as3711: Set regmap config reg counts properly mfd: rc5t583: Set regmap config reg counts properly gpio: tps65086: Add GPO driver for the TPS65086 PMIC mfd: mt6397: Add platform device ID table mfd: da9063: Fix missing volatile registers in the core regmap_range volatile lists mfd: mt6397: Add MT6323 support to MT6397 driver mfd: mt6397: Add support for different Slave types mfd: mt6397: int_con and int_status may vary in location dt-bindings: mfd: Add bindings for the MediaTek MT6323 PMIC mfd: da9062: Fix missing volatile registers in the core regmap_range volatile lists mfd: Add documentation for ACT8945A DT bindings ... |
||
Linus Torvalds
|
021f163d69 |
sound updates for 4.6-rc1
After a heavy storm by syzkaller in 4.5 cycle, we have relatively few changes in the core at this time while a lot of changes are found in the driver side, unsurprisingly. Below are some highlights: ALSA core: - A few more hardening in ALSA timer codes - An extension of sequencer API for advertising the card / pid - Small fixes in compress-offload and jack layers HD-audio: - Dynamic PCM assignment in HDMI/DP codec; preparation for upcoming DP-MST support - Lots of code refactoring for sharing with ASoC SKL driver - Regression fixes for Intel HDMI/DP - Fixups for CX20724 codec, Lenovo AiO USB-audio: - Add quirk_alias option to make quirk debugging easier - Fixes for possible Oops by malformed firmware Firewire: - Add support for FW-1804 in tascam driver - Improvements / changes in card registration, multi stream handling, etc for DICE - Lots of code refactoring ASoC: - Enhancements of still ongoing topology API - Lots of commits for Intel Skylake support including HDMI support - A few Intel Atom driver updates for recent devices - Lots of improvements to the Renesas drivers - Capture support for Qualcomm drivers - Support for TI DaVinci DRA7xxx devices - New machine drivers for Freescale systems with Cirrus CODECs, Mediatek systems with RT5650 CODECs - New CPU drivers for Allwinner S/PDIF controllers - New CODEC drivers for Maxim MAX9867 and MAX98926 and Realtek RT5514 -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iQIcBAABCAAGBQJW69UAAAoJEGwxgFQ9KSmkoaAQAJ6uBco1gqTmYkJGyLMRRblT BxEQ0NMSlPrNEJpR6GOYknrdPZiA4WfxT1zhswDQoNvSKery3bn3aOGfWHA9I+9j TRUwHkOAlRCcwgTfy70pRS0fcAx34y9nTcAWsVn9RbrMP3ydkwKyMXRqTwqYr5u5 UU53PSdwhUO8q/PomvBeip8nvw7zrV+06nVbEMUnIQlgp165n/qq0sRFBVkRBBJ7 ooqe6VW6F2Es3Zh+W9Vp/qn9OpZEdDCKvmICX1RIFJUgYRRxbL+L021TGjkaXVmT Or9L9StRYePZsCo1I1vsYUbYc6+Y3qDmqViGhREHBZ27EY8G1Utk7wy959vt0eFj 1xHynw36kmjrw/QlPraJBRuYIQh4SRAcXhw+wQdM5rxdp7gDjikhkezHZQWrvQAJ 5XXitZhVVNa9DRS5ZRwnW5nT/emQ+KBuJyl9gyAL1HaoZoYnDvRkfe9CGpgj7TRP wYcnL+rKL9x8eiJY5VTfL9rIxTgNYXvuPPBgdmJEp8qu5de8O1g5UN0xHSGf3yhr DVE5r/2J+gYNprsSF9DV6pfFQuh/Efw9XW2IbK6k6WF4labWGeD7rLrI4t9aJcXv PJ1FY/sUFhHZhZjHlGbR9emK+BLtZweFvOAvY7dD74ON65D5tYXvHPo0QTc4V5Op d0eDg0pcTdFLDqq8ZLLr =Cc+v -----END PGP SIGNATURE----- Merge tag 'sound-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "After a heavy storm by syzkaller in 4.5 cycle, we have relatively few changes in the core at this time while a lot of changes are found in the driver side, unsurprisingly. Below are some highlights: ALSA core: - A few more hardening in ALSA timer codes - An extension of sequencer API for advertising the card / pid - Small fixes in compress-offload and jack layers HD-audio: - Dynamic PCM assignment in HDMI/DP codec; preparation for upcoming DP-MST support - Lots of code refactoring for sharing with ASoC SKL driver - Regression fixes for Intel HDMI/DP - Fixups for CX20724 codec, Lenovo AiO USB-audio: - Add quirk_alias option to make quirk debugging easier - Fixes for possible Oops by malformed firmware Firewire: - Add support for FW-1804 in tascam driver - Improvements / changes in card registration, multi stream handling, etc for DICE - Lots of code refactoring ASoC: - Enhancements of still ongoing topology API - Lots of commits for Intel Skylake support including HDMI support - A few Intel Atom driver updates for recent devices - Lots of improvements to the Renesas drivers - Capture support for Qualcomm drivers - Support for TI DaVinci DRA7xxx devices - New machine drivers for Freescale systems with Cirrus CODECs, Mediatek systems with RT5650 CODECs - New CPU drivers for Allwinner S/PDIF controllers - New CODEC drivers for Maxim MAX9867 and MAX98926 and Realtek RT5514" * tag 'sound-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (291 commits) ALSA: hda - Fix mutex deadlock at HDMI/DP hotplug ALSA: ctl: change return value in compatibility layer so that it's the same value in core implementation ALSA: mixart: silence an uninitialized variable warning ALSA: usb-audio: Add sanity checks for endpoint accesses ALSA: usb-audio: Minor code cleanup in create_fixed_stream_quirk() ALSA: usb-audio: Fix NULL dereference in create_fixed_stream_quirk() ALSA: hda - Limit i915 HDMI binding only for HSW and later ALSA: hda - Fix unconditional GPIO toggle via automute ALSA: mixart: silence unitialized variable warnings ALSA: hda - Fixes double fault in nvhdmi_chmap_cea_alloc_validate_get_type ALSA: intel8x0: Add clock quirk entry for AD1981B on IBM ThinkPad X41. ALSA: hda - Add new GPU codec ID 0x10de0082 to snd-hda ASoC: rsnd: add simplified module explanation ASoC: hdac_hdmi: Add broxton device ID ASoC: Intel: Bxtn: Add Broxton PCI ID ASoC: Intel: Skylake: Move Skylake dsp ops & loader ops ASoC: Intel: add dmabuffer to common sst_dsp ASoC: Intel: Skylake: Unstatify skl_dsp_enable_core ASoC: Intel: Skylake: Fix whitepsace issues ASoC: Intel: Skylake: Move module id defines ... |
||
Fabio Estevam
|
5027e19db8 |
of: Add vendor prefix for eGalax_eMPIA Technology Inc
eGalax_eMPIA Technology Inc (EETI) is a company specialized in touchscreen controller solutions. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Rob Herring <robh@kernel.org> |
||
Geert Uytterhoeven
|
ddf3dc82f1 |
dt-bindings: i2c: Spelling s/propoerty/property/
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> |
||
Linus Torvalds
|
9dffdb38d8 |
Staging driver patches for 4.6-rc1
Here is the big staging driver pull request for 4.6-rc1. Lots of little things here, over 1600 patches or so. Notible is all of the good Lustre work happening, those developers have finally woken up and are cleaning up their code greatly. The Outreachy intern application process is also happening, which brought in another 400 or so patches. Full details are in the very long shortlog. All of these have been in linux-next with no reported issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iEYEABECAAYFAlbrc3EACgkQMUfUDdst+ylu5ACgpdTKjrZn2vHElW3GRhTpzJdQ wz8AoJDeur2DmBkQrKD5/u/WL4UTRNZJ =+Q6N -----END PGP SIGNATURE----- Merge tag 'staging-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging driver updates from Greg KH: "Here is the big staging driver pull request for 4.6-rc1. Lots of little things here, over 1600 patches or so. Notable is all of the good Lustre work happening, those developers have finally woken up and are cleaning up their code greatly. The Outreachy intern application process is also happening, which brought in another 400 or so patches. Full details are in the very long shortlog. All of these have been in linux-next with no reported issues" * tag 'staging-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (1673 commits) staging: lustre: fix aligments in lnet selftest staging: lustre: report minimum of two buffers for LNet selftest load test staging: lustre: test for proper errno code in lstcon_rpc_trans_abort staging: lustre: filter remaining extra spacing for lnet selftest staging: lustre: remove extra spacing when setting variable for lnet selftest staging: lustre: remove extra spacing of variable declartions for lnet selftest staging: lustre: fix spacing issues checkpatch reported in lnet selftest staging: lustre: remove returns in void function for lnet selftest staging: lustre: fix bogus lst errors for lnet selftest staging: netlogic: Replacing pr_err with dev_err after the call to devm_kzalloc staging: mt29f_spinand: Replacing pr_info with dev_info after the call to devm_kzalloc staging: android: ion: fix up file mode staging: ion: debugfs invalid gfp mask staging: rts5208: Replace pci_enable_device with pcim_enable_device Staging: ieee80211: Place constant on right side of the test. staging: speakup: Replace del_timer with del_timer_sync staging: lowmemorykiller: fix 2 checks that checkpatch complained staging: mt29f_spinand: Drop void pointer cast staging: rdma: hfi1: file_ops: Replace ALIGN with PAGE_ALIGN staging: rdma: hfi1: driver: Replace IS_ALIGNED with PAGE_ALIGNED ... |
||
Linus Torvalds
|
10fdfee7f7 |
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov: "The most notable item is addition of support for Synaptics RMI4 protocol which is native protocol for all current Synaptics devices (touchscreens, touchpads). In later releases we'll switch devices using HID and PS/2 protocol emulation to RMI4. You will also get: - BYD PS/2 touchpad protocol support for psmouse - MELFAS MIP4 Touchscreen driver - rotary encoder was moved away from legacy platform data and to generic device properties API, devm_* API, and can now handle encoders using more than 2 GPIOs - Cypress touchpad driver was switched to devm_* API and device properties - other assorted driver fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (40 commits) ARM: pxa/raumfeld: use PROPERTY_ENTRY_INTEGER to define props Input: synaptics-rmi4 - using logical instead of bitwise AND Input: powermate - fix oops with malicious USB descriptors Input: snvs_pwrkey - fix returned value check of syscon_regmap_lookup_by_phandle() MAINTAINERS: add devicetree bindings to Input Drivers section Input: synaptics-rmi4 - add device tree support to the SPI transport driver Input: synaptics-rmi4 - add SPI transport driver Input: synaptics-rmi4 - add support for F30 Input: synaptics-rmi4 - add support for F12 Input: synaptics-rmi4 - add device tree support for 2d sensors and F11 Input: synaptics-rmi4 - add support for 2D sensors and F11 Input: synaptics-rmi4 - add device tree support for RMI4 I2C devices Input: synaptics-rmi4 - add I2C transport driver Input: synaptics-rmi4 - add support for Synaptics RMI4 devices Input: ad7879 - add device tree support Input: ad7879 - fix default x/y axis assignment Input: ad7879 - move header to platform_data directory Input: ts4800 - add hardware dependency Input: cyapa - fix for losing events during device power transitions Input: sh_keysc - remove dependency on SUPERH ... |
||
Linus Torvalds
|
1a46712aa9 |
This is the bulk of GPIO changes for kernel v4.6:
Core changes: - The gpio_chip is now a *real device*. Until now the gpio chips were just piggybacking the parent device or (gasp) floating in space outside of the device model. We now finally make GPIO chips devices. The gpio_chip will create a gpio_device which contains a struct device, and this gpio_device struct is kept private. Anything that needs to be kept private from the rest of the kernel will gradually be moved over to the gpio_device. - As a result of making the gpio_device a real device, we have added resource management, so devm_gpiochip_add_data() will cut down on overhead and reduce code lines. A huge slew of patches convert almost all drivers in the subsystem to use this. - Building on making the GPIO a real device, we add the first step of a new userspace ABI: the GPIO character device. We take small steps here, so we first add a pure *information* ABI and the tool "lsgpio" that will list all GPIO devices on the system and all lines on these devices. We can now discover GPIOs properly from userspace. We still have not come up with a way to actually *use* GPIOs from userspace. - To encourage people to use the character device for the future, we have it always-enabled when using GPIO. The old sysfs ABI is still opt-in (and can be used in parallel), but is marked as deprecated. We will keep it around for the foreseeable future, but it will not be extended to cover ever more use cases. Cleanup: - Bjorn Helgaas removed a whole slew of per-architecture <asm/gpio.h> includes. This dates back to when GPIO was an opt-in feature and no shared library even existed: just a header file with proper prototypes was provided and all semantics were up to the arch to implement. These patches make the GPIO chip even more a proper device and cleans out leftovers of the old in-kernel API here and there. Still some cruft is left but it's very little now. - There is still some clamping of return values for .get() going on, but we now return sane values in the vast majority of drivers and the errorpath is sanitized. Some patches for powerpc, blackfin and unicore still drop in. - We continue to switch the ARM, MIPS, blackfin, m68k local GPIO implementations to use gpiochip_add_data() and cut down on code lines. - MPC8xxx is converted to use the generic GPIO helpers. - ATH79 is converted to use the generic GPIO helpers. New drivers: - WinSystems WS16C48 - Acces 104-DIO-48E - F81866 (a F7188x variant) - Qoric (a MPC8xxx variant) - TS-4800 - SPI serializers (pisosr): simple 74xx shift registers connected to SPI to obtain a dirt-cheap output-only GPIO expander. - Texas Instruments TPIC2810 - Texas Instruments TPS65218 - Texas Instruments TPS65912 - X-Gene (ARM64) standby GPIO controller -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJW6m24AAoJEEEQszewGV1zUasP/RpTrjRcNI5QFHjudd2oioDx R/IljC06Q072ZqVy/MR7QxwhoU8jUnCgKgv4rgMa1OcfHblxC2R1+YBKOUSij831 E+SYmYDYmoMhN7j5Aslr66MXg1rLdFSdCZWemuyNruAK8bx6cTE1AWS8AELQzzTn Re/CPpCDbujLy0ZK2wJHgr9ZkdcBGICtDRCrOR3Kyjpwk/DSZcruK1PDN+VQMI3k bJlwgtGenOHINgCq/16edpwj/hzmoJXhTOZXJHI5XVR6czTwb3SvCYACvCkauI/a /N7b3quG88b5y0OPQPVxp5+VVl9GyVcv5oGzIfTNat/g5QinShZIT4kVV9r0xu6/ TQHh1HlXleh+QI3yX0oRv9ztHreMf+vdpw1dhIwLqHqfJ7AWdOGk7BbKjwCrsOoq t/qUVFnyvooLpyr53Z5JY8+LqyynHF68G+jUQyHLgTZ0GCE+z+1jqNl1T501n3kv 3CSlNYxSN/YUBN3cnroAIU/ZWcV4YRdxmOtEWP+7xgcdzTE6s/JHb2fuEfVHzWPf mHWtJGy8U0IR4VSSEln5RtjhRr0PAjTHeTOGAmivUnaIGDziTowyUVF+X5hwC77E DGTuLVx/Kniv173DK7xNAsUZNAETBa3fQZTgu+RfOpMiM1FZc7tI1rd7K7PjbyCc d2M0gcq+d11ITJTxC7OM =9AJ4 -----END PGP SIGNATURE----- Merge tag 'gpio-v4.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Linus Walleij: "This is the bulk of GPIO changes for kernel v4.6. There is quite a lot of interesting stuff going on. The patches to other subsystems and arch-wide are ACKed as far as possible, though I consider things like per-arch <asm/gpio.h> as essentially a part of the GPIO subsystem so it should not be needed. Core changes: - The gpio_chip is now a *real device*. Until now the gpio chips were just piggybacking the parent device or (gasp) floating in space outside of the device model. We now finally make GPIO chips devices. The gpio_chip will create a gpio_device which contains a struct device, and this gpio_device struct is kept private. Anything that needs to be kept private from the rest of the kernel will gradually be moved over to the gpio_device. - As a result of making the gpio_device a real device, we have added resource management, so devm_gpiochip_add_data() will cut down on overhead and reduce code lines. A huge slew of patches convert almost all drivers in the subsystem to use this. - Building on making the GPIO a real device, we add the first step of a new userspace ABI: the GPIO character device. We take small steps here, so we first add a pure *information* ABI and the tool "lsgpio" that will list all GPIO devices on the system and all lines on these devices. We can now discover GPIOs properly from userspace. We still have not come up with a way to actually *use* GPIOs from userspace. - To encourage people to use the character device for the future, we have it always-enabled when using GPIO. The old sysfs ABI is still opt-in (and can be used in parallel), but is marked as deprecated. We will keep it around for the foreseeable future, but it will not be extended to cover ever more use cases. Cleanup: - Bjorn Helgaas removed a whole slew of per-architecture <asm/gpio.h> includes. This dates back to when GPIO was an opt-in feature and no shared library even existed: just a header file with proper prototypes was provided and all semantics were up to the arch to implement. These patches make the GPIO chip even more a proper device and cleans out leftovers of the old in-kernel API here and there. Still some cruft is left but it's very little now. - There is still some clamping of return values for .get() going on, but we now return sane values in the vast majority of drivers and the errorpath is sanitized. Some patches for powerpc, blackfin and unicore still drop in. - We continue to switch the ARM, MIPS, blackfin, m68k local GPIO implementations to use gpiochip_add_data() and cut down on code lines. - MPC8xxx is converted to use the generic GPIO helpers. - ATH79 is converted to use the generic GPIO helpers. New drivers: - WinSystems WS16C48 - Acces 104-DIO-48E - F81866 (a F7188x variant) - Qoric (a MPC8xxx variant) - TS-4800 - SPI serializers (pisosr): simple 74xx shift registers connected to SPI to obtain a dirt-cheap output-only GPIO expander. - Texas Instruments TPIC2810 - Texas Instruments TPS65218 - Texas Instruments TPS65912 - X-Gene (ARM64) standby GPIO controller" * tag 'gpio-v4.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (194 commits) Revert "Share upstreaming patches" gpio: mcp23s08: Fix clearing of interrupt. gpiolib: Fix comment referring to gpio_*() in gpiod_*() gpio: pca953x: Fix pca953x_gpio_set_multiple() on 64-bit gpio: xgene: Fix kconfig for standby GIPO contoller gpio: Add generic serializer DT binding gpio: uapi: use 0xB4 as ioctl() major gpio: tps65912: fix bad merge Revert "gpio: lp3943: Drop pin_used and lp3943_gpio_request/lp3943_gpio_free" gpio: omap: drop dev field from gpio_bank structure gpio: mpc8xxx: Slightly update the code for better readability gpio: mpc8xxx: Remove *read_reg and *write_reg from struct mpc8xxx_gpio_chip gpio: mpc8xxx: Fixup setting gpio direction output gpio: mcp23s08: Add support for mcp23s18 dt-bindings: gpio: altera: Fix altr,interrupt-type property gpio: add driver for MEN 16Z127 GPIO controller gpio: lp3943: Drop pin_used and lp3943_gpio_request/lp3943_gpio_free gpio: timberdale: Switch to devm_ioremap_resource() gpio: ts4800: Add IMX51 dependency gpiolib: rewrite gpiodev_add_to_list ... |
||
Linus Torvalds
|
588ab3f9af |
arm64 updates for 4.6:
- Initial page table creation reworked to avoid breaking large block mappings (huge pages) into smaller ones. The ARM architecture requires break-before-make in such cases to avoid TLB conflicts but that's not always possible on live page tables - Kernel virtual memory layout: the kernel image is no longer linked to the bottom of the linear mapping (PAGE_OFFSET) but at the bottom of the vmalloc space, allowing the kernel to be loaded (nearly) anywhere in physical RAM - Kernel ASLR: position independent kernel Image and modules being randomly mapped in the vmalloc space with the randomness is provided by UEFI (efi_get_random_bytes() patches merged via the arm64 tree, acked by Matt Fleming) - Implement relative exception tables for arm64, required by KASLR (initial code for ARCH_HAS_RELATIVE_EXTABLE added to lib/extable.c but actual x86 conversion to deferred to 4.7 because of the merge dependencies) - Support for the User Access Override feature of ARMv8.2: this allows uaccess functions (get_user etc.) to be implemented using LDTR/STTR instructions. Such instructions, when run by the kernel, perform unprivileged accesses adding an extra level of protection. The set_fs() macro is used to "upgrade" such instruction to privileged accesses via the UAO bit - Half-precision floating point support (part of ARMv8.2) - Optimisations for CPUs with or without a hardware prefetcher (using run-time code patching) - copy_page performance improvement to deal with 128 bytes at a time - Sanity checks on the CPU capabilities (via CPUID) to prevent incompatible secondary CPUs from being brought up (e.g. weird big.LITTLE configurations) - valid_user_regs() reworked for better sanity check of the sigcontext information (restored pstate information) - ACPI parking protocol implementation - CONFIG_DEBUG_RODATA enabled by default - VDSO code marked as read-only - DEBUG_PAGEALLOC support - ARCH_HAS_UBSAN_SANITIZE_ALL enabled - Erratum workaround Cavium ThunderX SoC - set_pte_at() fix for PROT_NONE mappings - Code clean-ups -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJW6u95AAoJEGvWsS0AyF7xMyoP/3x2O6bgreSQ84BdO4JChN4+ RQ9OVdX8u2ItO9sgaCY2AA6KoiBuEjGmPl/XRuK0I7DpODTtRjEXQHuNNhz8AelC hn4AEVqamY6Z5BzHFIjs8G9ydEbq+OXcKWEdwSsBhP/cMvI7ss3dps1f5iNPT5Vv 50E/kUz+aWYy7pKlB18VDV7TUOA3SuYuGknWV8+bOY5uPb8hNT3Y3fHOg/EuNNN3 DIuYH1V7XQkXtF+oNVIGxzzJCXULBE7egMcWAm1ydSOHK0JwkZAiL7OhI7ceVD0x YlDxBnqmi4cgzfBzTxITAhn3OParwN6udQprdF1WGtFF6fuY2eRDSH/L/iZoE4DY OulL951OsBtF8YC3+RKLk908/0bA2Uw8ftjCOFJTYbSnZBj1gWK41VkCYMEXiHQk EaN8+2Iw206iYIoyvdjGCLw7Y0oakDoVD9vmv12SOaHeQljTkjoN8oIlfjjKTeP7 3AXj5v9BDMDVh40nkVayysRNvqe48Kwt9Wn0rhVTLxwdJEiFG/OIU6HLuTkretdN dcCNFSQrRieSFHpBK9G0vKIpIss1ZwLm8gjocVXH7VK4Mo/TNQe4p2/wAF29mq4r xu1UiXmtU3uWxiqZnt72LOYFCarQ0sFA5+pMEvF5W+NrVB0wGpXhcwm+pGsIi4IM LepccTgykiUBqW5TRzPz =/oS+ -----END PGP SIGNATURE----- Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 updates from Catalin Marinas: "Here are the main arm64 updates for 4.6. There are some relatively intrusive changes to support KASLR, the reworking of the kernel virtual memory layout and initial page table creation. Summary: - Initial page table creation reworked to avoid breaking large block mappings (huge pages) into smaller ones. The ARM architecture requires break-before-make in such cases to avoid TLB conflicts but that's not always possible on live page tables - Kernel virtual memory layout: the kernel image is no longer linked to the bottom of the linear mapping (PAGE_OFFSET) but at the bottom of the vmalloc space, allowing the kernel to be loaded (nearly) anywhere in physical RAM - Kernel ASLR: position independent kernel Image and modules being randomly mapped in the vmalloc space with the randomness is provided by UEFI (efi_get_random_bytes() patches merged via the arm64 tree, acked by Matt Fleming) - Implement relative exception tables for arm64, required by KASLR (initial code for ARCH_HAS_RELATIVE_EXTABLE added to lib/extable.c but actual x86 conversion to deferred to 4.7 because of the merge dependencies) - Support for the User Access Override feature of ARMv8.2: this allows uaccess functions (get_user etc.) to be implemented using LDTR/STTR instructions. Such instructions, when run by the kernel, perform unprivileged accesses adding an extra level of protection. The set_fs() macro is used to "upgrade" such instruction to privileged accesses via the UAO bit - Half-precision floating point support (part of ARMv8.2) - Optimisations for CPUs with or without a hardware prefetcher (using run-time code patching) - copy_page performance improvement to deal with 128 bytes at a time - Sanity checks on the CPU capabilities (via CPUID) to prevent incompatible secondary CPUs from being brought up (e.g. weird big.LITTLE configurations) - valid_user_regs() reworked for better sanity check of the sigcontext information (restored pstate information) - ACPI parking protocol implementation - CONFIG_DEBUG_RODATA enabled by default - VDSO code marked as read-only - DEBUG_PAGEALLOC support - ARCH_HAS_UBSAN_SANITIZE_ALL enabled - Erratum workaround Cavium ThunderX SoC - set_pte_at() fix for PROT_NONE mappings - Code clean-ups" * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (99 commits) arm64: kasan: Fix zero shadow mapping overriding kernel image shadow arm64: kasan: Use actual memory node when populating the kernel image shadow arm64: Update PTE_RDONLY in set_pte_at() for PROT_NONE permission arm64: Fix misspellings in comments. arm64: efi: add missing frame pointer assignment arm64: make mrs_s prefixing implicit in read_cpuid arm64: enable CONFIG_DEBUG_RODATA by default arm64: Rework valid_user_regs arm64: mm: check at build time that PAGE_OFFSET divides the VA space evenly arm64: KVM: Move kvm_call_hyp back to its original localtion arm64: mm: treat memstart_addr as a signed quantity arm64: mm: list kernel sections in order arm64: lse: deal with clobbered IP registers after branch via PLT arm64: mm: dump: Use VA_START directly instead of private LOWEST_ADDR arm64: kconfig: add submenu for 8.2 architectural features arm64: kernel: acpi: fix ioremap in ACPI parking protocol cpu_postboot arm64: Add support for Half precision floating point arm64: Remove fixmap include fragility arm64: Add workaround for Cavium erratum 27456 arm64: mm: Mark .rodata as RO ... |
||
Linus Torvalds
|
364e8dd9d6 |
Configfs changes for the 4.6 merge window:
- A large patch from me to simplify setting up the list of default groups by actually implementing it as a list instead of an array. - a small Y2083 prep patch from Deepa Dinamani. Probably doesn't matter on it's own, but it seems like he is trying to get rid of all CURRENT_TIME uses in file systems, which is a worthwhile goal. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJW6Cz6AAoJEA+eU2VSBFGDmNYP/AzJuVdkXjOkzmAl0SjwS0UC b/gTF0Z0jAmXX8QTf0NtdNajHweYyY4PVvyuUYojO/Y9bgJigRC6gHIUviq8TLhO JR1EUJ3RNoWFZSHeEGTM4q+kSg3GkZ83WixeBiMkIZo7QgPXU2YB0mzErpdcID3N +KVnoVU+asVQi656UIDNZ1SawTAGog+tIMIgnM4vmL0Dd+9yN4pYhAmRLLS0C83P DPci/oVx1a3IjWAkmz24qtb9ht/SA+IBwyFPltg/gdn5OgJL9Vr1naW5mkqMhoPF PUBfX9YYizMwNMYuchng6JqyWlZBjXFr6iqi401vFJcILeq27As5Kc9adfDOEvVC V/dWCmTyMlHX507t+lC7kTa6OaHAZKA5scCHA6dgpQIvGfiaMNNu7MW8C6p0HqwY rf7na7S2fAu5zCyIRVPK//YMNbRHh2AoclzpK7Sw0NCV5jBlXZOdDJcSb4jQsVF7 Yy84EqcebvF4ocaFRzwA/ZHNxz65l5Qu7brmOu6pTliQuQED1fop5z92RXkw2e9y rSIgzMCL5IoAUkYtoO1jzAQXzyySAb3QDpwCaBdZLzN4MbRF/dUxZDkOePKTaVft ckNXj5AVzvLYlpkmkhQ+bqsh91ayFH2/gw9Kt38i1yjzNLhsccZwq9ja5ifPlHLQ nOFiane31yp3Zhac8drb =9HqT -----END PGP SIGNATURE----- Merge tag 'configfs-for-linus' of git://git.infradead.org/users/hch/configfs Pull configfs updates from Christoph Hellwig: - A large patch from me to simplify setting up the list of default groups by actually implementing it as a list instead of an array. - a small Y2083 prep patch from Deepa Dinamani. Probably doesn't matter on it's own, but it seems like he is trying to get rid of all CURRENT_TIME uses in file systems, which is a worthwhile goal. * tag 'configfs-for-linus' of git://git.infradead.org/users/hch/configfs: configfs: switch ->default groups to a linked list configfs: Replace CURRENT_TIME by current_fs_time() |
||
Christoph Lameter
|
93e205a728 |
fix Christoph's email addresses
There are various email addresses for me throughout the kernel. Use the one that will always be valid. Signed-off-by: Christoph Lameter <cl@linux.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
John Stultz
|
5de23d435e |
proc: add /proc/<pid>/timerslack_ns interface
This patch provides a proc/PID/timerslack_ns interface which exposes a task's timerslack value in nanoseconds and allows it to be changed. This allows power/performance management software to set timer slack for other threads according to its policy for the thread (such as when the thread is designated foreground vs. background activity) If the value written is non-zero, slack is set to that value. Otherwise sets it to the default for the thread. This interface checks that the calling task has permissions to to use PTRACE_MODE_ATTACH_FSCREDS on the target task, so that we can ensure arbitrary apps do not change the timer slack for other apps. Signed-off-by: John Stultz <john.stultz@linaro.org> Acked-by: Kees Cook <keescook@chromium.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Oren Laadan <orenl@cellrox.com> Cc: Ruchi Kandoi <kandoiruchi@google.com> Cc: Rom Lemarchand <romlem@android.com> Cc: Android Kernel Team <kernel-team@android.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Johannes Weiner
|
b6e6edcfa4 |
mm: memcontrol: reclaim and OOM kill when shrinking memory.max below usage
Setting the original memory.limit_in_bytes hardlimit is subject to a race condition when the desired value is below the current usage. The code tries a few times to first reclaim and then see if the usage has dropped to where we would like it to be, but there is no locking, and the workload is free to continue making new charges up to the old limit. Thus, attempting to shrink a workload relies on pure luck and hope that the workload happens to cooperate. To fix this in the cgroup2 memory.max knob, do it the other way round: set the limit first, then try enforcement. And if reclaim is not able to succeed, trigger OOM kills in the group. Keep going until the new limit is met, we run out of OOM victims and there's only unreclaimable memory left, or the task writing to memory.max is killed. This allows users to shrink groups reliably, and the behavior is consistent with what happens when new charges are attempted in excess of memory.max. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Vladimir Davydov <vdavydov@virtuozzo.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Mel Gorman
|
444eb2a449 |
mm: thp: set THP defrag by default to madvise and add a stall-free defrag option
THP defrag is enabled by default to direct reclaim/compact but not wake kswapd in the event of a THP allocation failure. The problem is that THP allocation requests potentially enter reclaim/compaction. This potentially incurs a severe stall that is not guaranteed to be offset by reduced TLB misses. While there has been considerable effort to reduce the impact of reclaim/compaction, it is still a high cost and workloads that should fit in memory fail to do so. Specifically, a simple anon/file streaming workload will enter direct reclaim on NUMA at least even though the working set size is 80% of RAM. It's been years and it's time to throw in the towel. First, this patch defines THP defrag as follows; madvise: A failed allocation will direct reclaim/compact if the application requests it never: Neither reclaim/compact nor wake kswapd defer: A failed allocation will wake kswapd/kcompactd always: A failed allocation will direct reclaim/compact (historical behaviour) khugepaged defrag will enter direct/reclaim but not wake kswapd. Next it sets the default defrag option to be "madvise" to only enter direct reclaim/compaction for applications that specifically requested it. Lastly, it removes a check from the page allocator slowpath that is related to __GFP_THISNODE to allow "defer" to work. The callers that really cares are slub/slab and they are updated accordingly. The slab one may be surprising because it also corrects a comment as kswapd was never woken up by that path. This means that a THP fault will no longer stall for most applications by default and the ideal for most users that get THP if they are immediately available. There are still options for users that prefer a stall at startup of a new application by either restoring historical behaviour with "always" or pick a half-way point with "defer" where kswapd does some of the work in the background and wakes kcompactd if necessary. THP defrag for khugepaged remains enabled and will enter direct/reclaim but no wakeup kswapd or kcompactd. After this patch a THP allocation failure will quickly fallback and rely on khugepaged to recover the situation at some time in the future. In some cases, this will reduce THP usage but the benefit of THP is hard to measure and not a universal win where as a stall to reclaim/compaction is definitely measurable and can be painful. The first test for this is using "usemem" to read a large file and write a large anonymous mapping (to avoid the zero page) multiple times. The total size of the mappings is 80% of RAM and the benchmark simply measures how long it takes to complete. It uses multiple threads to see if that is a factor. On UMA, the performance is almost identical so is not reported but on NUMA, we see this usemem 4.4.0 4.4.0 kcompactd-v1r1 nodefrag-v1r3 Amean System-1 102.86 ( 0.00%) 46.81 ( 54.50%) Amean System-4 37.85 ( 0.00%) 34.02 ( 10.12%) Amean System-7 48.12 ( 0.00%) 46.89 ( 2.56%) Amean System-12 51.98 ( 0.00%) 56.96 ( -9.57%) Amean System-21 80.16 ( 0.00%) 79.05 ( 1.39%) Amean System-30 110.71 ( 0.00%) 107.17 ( 3.20%) Amean System-48 127.98 ( 0.00%) 124.83 ( 2.46%) Amean Elapsd-1 185.84 ( 0.00%) 105.51 ( 43.23%) Amean Elapsd-4 26.19 ( 0.00%) 25.58 ( 2.33%) Amean Elapsd-7 21.65 ( 0.00%) 21.62 ( 0.16%) Amean Elapsd-12 18.58 ( 0.00%) 17.94 ( 3.43%) Amean Elapsd-21 17.53 ( 0.00%) 16.60 ( 5.33%) Amean Elapsd-30 17.45 ( 0.00%) 17.13 ( 1.84%) Amean Elapsd-48 15.40 ( 0.00%) 15.27 ( 0.82%) For a single thread, the benchmark completes 43.23% faster with this patch applied with smaller benefits as the thread increases. Similar, notice the large reduction in most cases in system CPU usage. The overall CPU time is 4.4.0 4.4.0 kcompactd-v1r1 nodefrag-v1r3 User 10357.65 10438.33 System 3988.88 3543.94 Elapsed 2203.01 1634.41 Which is substantial. Now, the reclaim figures 4.4.0 4.4.0 kcompactd-v1r1nodefrag-v1r3 Minor Faults 128458477 278352931 Major Faults 2174976 225 Swap Ins 16904701 0 Swap Outs 17359627 0 Allocation stalls 43611 0 DMA allocs 0 0 DMA32 allocs 19832646 19448017 Normal allocs 614488453 580941839 Movable allocs 0 0 Direct pages scanned 24163800 0 Kswapd pages scanned 0 0 Kswapd pages reclaimed 0 0 Direct pages reclaimed 20691346 0 Compaction stalls 42263 0 Compaction success 938 0 Compaction failures 41325 0 This patch eliminates almost all swapping and direct reclaim activity. There is still overhead but it's from NUMA balancing which does not identify that it's pointless trying to do anything with this workload. I also tried the thpscale benchmark which forces a corner case where compaction can be used heavily and measures the latency of whether base or huge pages were used thpscale Fault Latencies 4.4.0 4.4.0 kcompactd-v1r1 nodefrag-v1r3 Amean fault-base-1 5288.84 ( 0.00%) 2817.12 ( 46.73%) Amean fault-base-3 6365.53 ( 0.00%) 3499.11 ( 45.03%) Amean fault-base-5 6526.19 ( 0.00%) 4363.06 ( 33.15%) Amean fault-base-7 7142.25 ( 0.00%) 4858.08 ( 31.98%) Amean fault-base-12 13827.64 ( 0.00%) 10292.11 ( 25.57%) Amean fault-base-18 18235.07 ( 0.00%) 13788.84 ( 24.38%) Amean fault-base-24 21597.80 ( 0.00%) 24388.03 (-12.92%) Amean fault-base-30 26754.15 ( 0.00%) 19700.55 ( 26.36%) Amean fault-base-32 26784.94 ( 0.00%) 19513.57 ( 27.15%) Amean fault-huge-1 4223.96 ( 0.00%) 2178.57 ( 48.42%) Amean fault-huge-3 2194.77 ( 0.00%) 2149.74 ( 2.05%) Amean fault-huge-5 2569.60 ( 0.00%) 2346.95 ( 8.66%) Amean fault-huge-7 3612.69 ( 0.00%) 2997.70 ( 17.02%) Amean fault-huge-12 3301.75 ( 0.00%) 6727.02 (-103.74%) Amean fault-huge-18 6696.47 ( 0.00%) 6685.72 ( 0.16%) Amean fault-huge-24 8000.72 ( 0.00%) 9311.43 (-16.38%) Amean fault-huge-30 13305.55 ( 0.00%) 9750.45 ( 26.72%) Amean fault-huge-32 9981.71 ( 0.00%) 10316.06 ( -3.35%) The average time to fault pages is substantially reduced in the majority of caseds but with the obvious caveat that fewer THPs are actually used in this adverse workload 4.4.0 4.4.0 kcompactd-v1r1 nodefrag-v1r3 Percentage huge-1 0.71 ( 0.00%) 14.04 (1865.22%) Percentage huge-3 10.77 ( 0.00%) 33.05 (206.85%) Percentage huge-5 60.39 ( 0.00%) 38.51 (-36.23%) Percentage huge-7 45.97 ( 0.00%) 34.57 (-24.79%) Percentage huge-12 68.12 ( 0.00%) 40.07 (-41.17%) Percentage huge-18 64.93 ( 0.00%) 47.82 (-26.35%) Percentage huge-24 62.69 ( 0.00%) 44.23 (-29.44%) Percentage huge-30 43.49 ( 0.00%) 55.38 ( 27.34%) Percentage huge-32 50.72 ( 0.00%) 51.90 ( 2.35%) 4.4.0 4.4.0 kcompactd-v1r1nodefrag-v1r3 Minor Faults 37429143 47564000 Major Faults 1916 1558 Swap Ins 1466 1079 Swap Outs 2936863 149626 Allocation stalls 62510 3 DMA allocs 0 0 DMA32 allocs 6566458 6401314 Normal allocs 216361697 216538171 Movable allocs 0 0 Direct pages scanned 25977580 17998 Kswapd pages scanned 0 3638931 Kswapd pages reclaimed 0 207236 Direct pages reclaimed 8833714 88 Compaction stalls 103349 5 Compaction success 270 4 Compaction failures 103079 1 Note again that while this does swap as it's an aggressive workload, the direct relcim activity and allocation stalls is substantially reduced. There is some kswapd activity but ftrace showed that the kswapd activity was due to normal wakeups from 4K pages being allocated. Compaction-related stalls and activity are almost eliminated. I also tried the stutter benchmark. For this, I do not have figures for NUMA but it's something that does impact UMA so I'll report what is available stutter 4.4.0 4.4.0 kcompactd-v1r1 nodefrag-v1r3 Min mmap 7.3571 ( 0.00%) 7.3438 ( 0.18%) 1st-qrtle mmap 7.5278 ( 0.00%) 17.9200 (-138.05%) 2nd-qrtle mmap 7.6818 ( 0.00%) 21.6055 (-181.25%) 3rd-qrtle mmap 11.0889 ( 0.00%) 21.8881 (-97.39%) Max-90% mmap 27.8978 ( 0.00%) 22.1632 ( 20.56%) Max-93% mmap 28.3202 ( 0.00%) 22.3044 ( 21.24%) Max-95% mmap 28.5600 ( 0.00%) 22.4580 ( 21.37%) Max-99% mmap 29.6032 ( 0.00%) 25.5216 ( 13.79%) Max mmap 4109.7289 ( 0.00%) 4813.9832 (-17.14%) Mean mmap 12.4474 ( 0.00%) 19.3027 (-55.07%) This benchmark is trying to fault an anonymous mapping while there is a heavy IO load -- a scenario that desktop users used to complain about frequently. This shows a mix because the ideal case of mapping with THP is not hit as often. However, note that 99% of the mappings complete 13.79% faster. The CPU usage here is particularly interesting 4.4.0 4.4.0 kcompactd-v1r1nodefrag-v1r3 User 67.50 0.99 System 1327.88 91.30 Elapsed 2079.00 2128.98 And once again we look at the reclaim figures 4.4.0 4.4.0 kcompactd-v1r1nodefrag-v1r3 Minor Faults 335241922 1314582827 Major Faults 715 819 Swap Ins 0 0 Swap Outs 0 0 Allocation stalls 532723 0 DMA allocs 0 0 DMA32 allocs 1822364341 1177950222 Normal allocs 1815640808 1517844854 Movable allocs 0 0 Direct pages scanned 21892772 0 Kswapd pages scanned 20015890 41879484 Kswapd pages reclaimed 19961986 41822072 Direct pages reclaimed 21892741 0 Compaction stalls 1065755 0 Compaction success 514 0 Compaction failures 1065241 0 Allocation stalls and all direct reclaim activity is eliminated as well as compaction-related stalls. THP gives impressive gains in some cases but only if they are quickly available. We're not going to reach the point where they are completely free so lets take the costs out of the fast paths finally and defer the cost to kswapd, kcompactd and khugepaged where it belongs. Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Rik van Riel <riel@redhat.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Johannes Weiner
|
795ae7a0de |
mm: scale kswapd watermarks in proportion to memory
In machines with 140G of memory and enterprise flash storage, we have seen read and write bursts routinely exceed the kswapd watermarks and cause thundering herds in direct reclaim. Unfortunately, the only way to tune kswapd aggressiveness is through adjusting min_free_kbytes - the system's emergency reserves - which is entirely unrelated to the system's latency requirements. In order to get kswapd to maintain a 250M buffer of free memory, the emergency reserves need to be set to 1G. That is a lot of memory wasted for no good reason. On the other hand, it's reasonable to assume that allocation bursts and overall allocation concurrency scale with memory capacity, so it makes sense to make kswapd aggressiveness a function of that as well. Change the kswapd watermark scale factor from the currently fixed 25% of the tunable emergency reserve to a tunable 0.1% of memory. Beyond 1G of memory, this will produce bigger watermark steps than the current formula in default settings. Ensure that the new formula never chooses steps smaller than that, i.e. 25% of the emergency reserve. On a 140G machine, this raises the default watermark steps - the distance between min and low, and low and high - from 16M to 143M. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Mel Gorman <mgorman@suse.de> Acked-by: Rik van Riel <riel@redhat.com> Acked-by: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Kirill A. Shutemov
|
f9719a03de |
thp, vmstats: count deferred split events
Count how many times we put a THP in split queue. Currently, it happens on partial unmap of a THP. Rapidly growing value can indicate that an application behaves unfriendly wrt THP: often fault in huge page and then unmap part of it. This leads to unnecessary memory fragmentation and the application may require tuning. The event also can help with debugging kernel [mis-]behaviour. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Vladimir Davydov
|
12580e4b54 |
mm: memcontrol: report kernel stack usage in cgroup2 memory.stat
Show how much memory is allocated to kernel stacks. Signed-off-by: Vladimir Davydov <vdavydov@virtuozzo.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Vladimir Davydov
|
27ee57c93f |
mm: memcontrol: report slab usage in cgroup2 memory.stat
Show how much memory is used for storing reclaimable and unreclaimable in-kernel data structures allocated from slab caches. Signed-off-by: Vladimir Davydov <vdavydov@virtuozzo.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Linus Torvalds
|
48d10bda1f |
USB patches for 4.6-rc1
Here is the big USB patchset for 4.6-rc1. The normal mess is here, gadget and xhci fixes and updates, and lots of other driver updates and cleanups as well. Full details are in the shortlog. All have been in linux-next for a while with no reported issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iEYEABECAAYFAlbp8/EACgkQMUfUDdst+ylsyQCgnVK6ZIFVPV9VijJvBIjxS3F+ fTMAoIMQwNrRMHQOq/lhxX00AgN0B9Ch =2EQp -----END PGP SIGNATURE----- Merge tag 'usb-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB updates from Greg KH: "Here is the big USB patchset for 4.6-rc1. The normal mess is here, gadget and xhci fixes and updates, and lots of other driver updates and cleanups as well. Full details are in the shortlog. All have been in linux-next for a while with no reported issues" * tag 'usb-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (266 commits) USB: core: let USB device know device node usb: devio: Add ioctl to disallow detaching kernel USB drivers. usb: gadget: f_acm: Fix configfs attr name usb: udc: lpc32xx: remove USB PLL and USB OTG clock management usb: udc: lpc32xx: remove direct access to clock controller registers usb: udc: lpc32xx: switch to clock prepare/unprepare model usb: renesas_usbhs: gadget: fix giveback status code in usbhsg_pipe_disable() usb: gadget: renesas_usb3: Use ARCH_RENESAS usb: dwc2: Fix issues in dwc2_complete_non_isoc_xfer_ddma() usb: dwc2: Add support for Lantiq ARX and XRX SoCs usb: phy: generic: Handle late registration of gadget usb: gadget: bdc_udc: fix race condition in bdc_udc_exit() usb: musb: core: added missing const qualifier to musb_hdrc_platform_data::config usb: dwc2: Move host-specific core functions into hcd.c usb: dwc2: Move register save and restore functions usb: dwc2: Use kmem_cache_free() usb: dwc2: host: If using uframe scheduler, end splits better usb: dwc2: host: Totally redo the microframe scheduler usb: dwc2: host: Properly set even/odd frame usb: dwc2: host: Add dwc2_hcd_get_future_frame_number() call ... |
||
Linus Torvalds
|
96b9b1c956 |
TTY/Serial patches for 4.6-rc1
Here's the big tty/serial driver pull request for 4.6-rc1. Lots of changes in here, Peter has been on a tear again, with lots of refactoring and bugs fixes, many thanks to the great work he has been doing. Lots of driver updates and fixes as well, full details in the shortlog. All have been in linux-next for a while with no reported issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iEYEABECAAYFAlbp8z8ACgkQMUfUDdst+ym1vwCgnOOCORaZyeQ4QrcxPAK5pHFn VrMAoNHvDgNYtG+Hmzv25Lgp3HnysPin =MLRG -----END PGP SIGNATURE----- Merge tag 'tty-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial updates from Greg KH: "Here's the big tty/serial driver pull request for 4.6-rc1. Lots of changes in here, Peter has been on a tear again, with lots of refactoring and bugs fixes, many thanks to the great work he has been doing. Lots of driver updates and fixes as well, full details in the shortlog. All have been in linux-next for a while with no reported issues" * tag 'tty-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (220 commits) serial: 8250: describe CONFIG_SERIAL_8250_RSA serial: samsung: optimize UART rx fifo access routine serial: pl011: add mark/space parity support serial: sa1100: make sa1100_register_uart_fns a function tty: serial: 8250: add MOXA Smartio MUE boards support serial: 8250: convert drivers to use up_to_u8250p() serial: 8250/mediatek: fix building with SERIAL_8250=m serial: 8250/ingenic: fix building with SERIAL_8250=m serial: 8250/uniphier: fix modular build Revert "drivers/tty/serial: make 8250/8250_ingenic.c explicitly non-modular" Revert "drivers/tty/serial: make 8250/8250_mtk.c explicitly non-modular" serial: mvebu-uart: initial support for Armada-3700 serial port serial: mctrl_gpio: Add missing module license serial: ifx6x60: avoid uninitialized variable use tty/serial: at91: fix bad offset for UART timeout register tty/serial: at91: restore dynamic driver binding serial: 8250: Add hardware dependency to RT288X option TTY, devpts: document pty count limiting tty: goldfish: support platform_device with id -1 drivers: tty: goldfish: Add device tree bindings ... |
||
Linus Torvalds
|
8eee93e257 |
Char/Misc patches for 4.6-rc1
Here is the big char/misc driver update for 4.6-rc1. The majority of the patches here is hwtracing and some new mic drivers, but there's a lot of other driver updates as well. Full details in the shortlog. All have been in linux-next for a while with no reported issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iEYEABECAAYFAlbp9IcACgkQMUfUDdst+ykyJgCeLTC2QNGrh51kiJglkVJ0yD36 q4MAn0NkvSX2+iv5Jq8MaX6UQoRa4Nun =MNjR -----END PGP SIGNATURE----- Merge tag 'char-misc-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc updates from Greg KH: "Here is the big char/misc driver update for 4.6-rc1. The majority of the patches here is hwtracing and some new mic drivers, but there's a lot of other driver updates as well. Full details in the shortlog. All have been in linux-next for a while with no reported issues" * tag 'char-misc-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (238 commits) goldfish: Fix build error of missing ioremap on UM nvmem: mediatek: Fix later provider initialization nvmem: imx-ocotp: Fix return value of imx_ocotp_read nvmem: Fix dependencies for !HAS_IOMEM archs char: genrtc: replace blacklist with whitelist drivers/hwtracing: make coresight-etm-perf.c explicitly non-modular drivers: char: mem: fix IS_ERROR_VALUE usage char: xillybus: Fix internal data structure initialization pch_phub: return -ENODATA if ROM can't be mapped Drivers: hv: vmbus: Support kexec on ws2012 r2 and above Drivers: hv: vmbus: Support handling messages on multiple CPUs Drivers: hv: utils: Remove util transport handler from list if registration fails Drivers: hv: util: Pass the channel information during the init call Drivers: hv: vmbus: avoid unneeded compiler optimizations in vmbus_wait_for_unload() Drivers: hv: vmbus: remove code duplication in message handling Drivers: hv: vmbus: avoid wait_for_completion() on crash Drivers: hv: vmbus: don't loose HVMSG_TIMER_EXPIRED messages misc: at24: replace memory_accessor with nvmem_device_read eeprom: 93xx46: extend driver to plug into the NVMEM framework eeprom: at25: extend driver to plug into the NVMEM framework ... |
||
Linus Torvalds
|
1a4ab084af |
Driver core patches for 4.6-rc1
Just a few patches this time around for the 4.6-rc1 merge window. Largest is a new firmware driver, but there are some other updates to the driver core in here as well, the shortlog has the details. All have been in linux-next for a while with no reported issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iEYEABECAAYFAlbp9QoACgkQMUfUDdst+ynsOQCghpfAf3CJDr4PWGCKzDJzyQG9 rZYAn2VwKsqHzAxgLXZY5fQIjxSyaLek =Mcvl -----END PGP SIGNATURE----- Merge tag 'driver-core-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Just a few patches this time around for the 4.6-rc1 merge window. Largest is a new firmware driver, but there are some other updates to the driver core in here as well, the shortlog has the details. All have been in linux-next for a while with no reported issues" * tag 'driver-core-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: Revert "driver-core: platform: probe of-devices only using list of compatibles" firmware: qemu config needs I/O ports firmware: qemu_fw_cfg.c: fix typo FW_CFG_DATA_OFF driver-core: platform: probe of-devices only using list of compatibles driver-core: platform: fix typo in documentation for multi-driver helper component: remove impossible condition drivers: dma-coherent: simplify dma_init_coherent_memory return value devicetree: update documentation for fw_cfg ARM bindings firmware: create directory hierarchy for sysfs fw_cfg entries firmware: introduce sysfs driver for QEMU's fw_cfg device kobject: export kset_find_obj() for module use driver core: bus: use to_subsys_private and to_device_private_bus driver core: bus: use list_for_each_entry* debugfs: Add stub function for debugfs_create_automount(). kernfs: make kernfs_walk_ns() use kernfs_pr_cont_buf[] |