* 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (24 commits)
tracing/urgent: warn in case of ftrace_start_up inbalance
tracing/urgent: fix unbalanced ftrace_start_up
function-graph: add stack frame test
function-graph: disable when both x86_32 and optimize for size are configured
ring-buffer: have benchmark test print to trace buffer
ring-buffer: do not grab locks in nmi
ring-buffer: add locks around rb_per_cpu_empty
ring-buffer: check for less than two in size allocation
ring-buffer: remove useless compile check for buffer_page size
ring-buffer: remove useless warn on check
ring-buffer: use BUF_PAGE_HDR_SIZE in calculating index
tracing: update sample event documentation
tracing/filters: fix race between filter setting and module unload
tracing/filters: free filter_string in destroy_preds()
ring-buffer: use commit counters for commit pointer accounting
ring-buffer: remove unused variable
ring-buffer: have benchmark test handle discarded events
ring-buffer: prevent adding write in discarded area
tracing/filters: strloc should be unsigned short
tracing/filters: operand can be negative
...
Fix up kmemcheck-induced conflict in kernel/trace/ring_buffer.c manually
If ftrace_dump_on_oops is set, and an NMI detects a lockup, then it
will need to read from the ring buffer. But the read side of the
ring buffer still takes locks. This patch adds a check on the read
side that if it is in an NMI, then it will disable the ring buffer
and not take any locks.
Reads can still happen on a disabled ring buffer.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The checking of whether the buffer is empty or not needs to be serialized
among the readers. Add the reader spin lock around it.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The ring buffer must have at least two pages allocated for the
reader page swap to work.
The page count check will miss the case of a zero size passed in.
Even though a zero size ring buffer would probably fail an allocation,
making the min size check for less than two instead of equal to one makes
the code a bit more robust.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The original version of the ring buffer had a hack to map the
page struct that held the pages of the buffer to also be the structure
that the ring buffer would keep the pages in a link list.
This overlap of the page struct was very dangerous and that hack was
removed a while ago.
But there was a check to make sure the buffer_page never became bigger
than the page struct, and would fail the compile if it did. The
check was only meaningful when we had the hack. Now that we have separate
allocated descriptors for the buffer pages, we can remove this check.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
A check if "write > BUF_PAGE_SIZE" is done right after a
if (write > BUF_PAGE_SIZE)
return ...;
Thus the check is actually testing the compiler and not the
kernel. This is useless, remove it.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The index of the event is found by masking PAGE_MASK to it and
subtracting the header size. Currently the header size is calculate
by PAGE_SIZE - BUF_PAGE_SIZE, when we already have a macro
BUF_PAGE_HDR_SIZE to define it.
If we want to change BUF_PAGE_SIZE to something less than filling
the rest of the page (this is done for debugging), then we break
the algorithm to find the index.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The ring buffer is made up of three sets of pointers.
The head page pointer, which points to the next page for the reader to
get.
The commit pointer and commit index, which points to the page and index
of the last committed write respectively.
The tail pointer and tail index, which points to the page and the index
of the last reserved data respectively (non committed).
The commit pointer is only moved forward by the outer most writer.
If a nested writer comes in, it will not move the pointer forward.
The current implementation has a flaw. It assumes that the outer most
writer successfully reserved data. There's a small race window where
the outer most writer could find the tail pointer, but a nested
writer could come in (via interrupt) and move the tail forward, and
even the commit forward.
The outer writer would not realized the commit moved forward and the
accounting will break.
This patch changes the design to use counters in the per cpu buffers
to keep track of commits. The counters are incremented at the start
of the commit, and decremented at the end. If the end commit counter
is 1, then it moves the commit pointers. A loop is made to check for
races between checking and moving the commit pointers. Only the outer
commit should move the pointers anyway.
The test of knowing if a reserve is equal to the last commit update
is still needed to know for time keeping. The time code is much less
racey than the commit updates.
This change not only solves the mentioned race, but also makes the
code simpler.
[ Impact: fix commit race and simplify code ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Fix the compiler error:
kernel/trace/ring_buffer.c: In function 'rb_move_tail':
kernel/trace/ring_buffer.c:1236: warning: unused variable 'event'
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
This a very tight race where an interrupt could come in and not
have enough data to put into the end of a buffer page, and that
it would fail to write and need to go to the next page.
But if this happened when another writer was about to reserver
their data, and that writer has smaller data to reserve, then
it could succeed even though the interrupt moved the tail page.
To pervent that, if we fail to store data, and by subtracting the
amount we reserved we still have room for smaller data, we need
to fill that space with "discarded" data.
[ Impact: prevent race were buffer data may be lost ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
LKML-Reference: <200906122115.30787.rusty@rustcorp.com.au>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
This gets rid of a heap of false-positive warnings from the tracer
code due to the use of bitfields.
[rebased for mainline inclusion]
Signed-off-by: Vegard Nossum <vegard.nossum@gmail.com>
The update of ret got mistakenly added to the if statement of
rb_try_to_discard. The variable ret should be 1 on commit and zero
otherwise.
[ Impact: fix compiler warning and real bug ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
On Sun, 7 Jun 2009, Ingo Molnar wrote:
> Testing tracer sched_switch: <6>Starting ring buffer hammer
> PASSED
> Testing tracer sysprof: PASSED
> Testing tracer function: PASSED
> Testing tracer irqsoff:
> =============================================
> PASSED
> Testing tracer preemptoff: PASSED
> Testing tracer preemptirqsoff: [ INFO: possible recursive locking detected ]
> PASSED
> Testing tracer branch: 2.6.30-rc8-tip-01972-ge5b9078-dirty #5760
> ---------------------------------------------
> rb_consumer/431 is trying to acquire lock:
> (&cpu_buffer->reader_lock){......}, at: [<c109eef7>] ring_buffer_reset_cpu+0x37/0x70
>
> but task is already holding lock:
> (&cpu_buffer->reader_lock){......}, at: [<c10a019e>] ring_buffer_consume+0x7e/0xc0
>
> other info that might help us debug this:
> 1 lock held by rb_consumer/431:
> #0: (&cpu_buffer->reader_lock){......}, at: [<c10a019e>] ring_buffer_consume+0x7e/0xc0
The ring buffer is a generic structure, and can be used outside of
ftrace. If ftrace traces within the use of the ring buffer, it can produce
false positives with lockdep.
This patch passes in a static lock key into the allocation of the ring
buffer, so that different ring buffers will have their own lock class.
Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1244477919.13761.9042.camel@twins>
[ store key in ring buffer descriptor ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Every buffer page in the ring buffer includes its own time stamp.
When an event is recorded to the ring buffer with a delta time greater
than what can be held in the event header, a time stamp event is created.
If the the create timestamp falls over to the next buffer page, it is
redundant because the buffer page holds a full time stamp. This patch
will try to discard the time stamp when it falls to the start of the
next page.
This change also fixes a issues with disarding events. If most events are
discarded, timestamps will start to creep into the ring buffer. If we
do not discard the timestamps then they can fill up the ring buffer over
time and waste space.
This change will keep time stamps from filling up over another page. If
something is recorded in the buffer page, and the rest is filtered, then
the time stamps can only fill up to the end of the page.
[ Impact: prevent time stamps from filling ring buffer ]
Reported-by: Tim Bird <tim.bird@am.sony.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
There are times that a race may happen that we add a timestamp in a
nested write. This timestamp would just contain a zero delta and serves
no purpose.
Now that we have a way to discard events, this patch will try to discard
the timestamp instead of just wasting the space in the ring buffer.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
There's a bug in ring_buffer_discard_commit. The wrong
pointer is being compared in order to check if the event
can be freed from the buffer rather than discarded
(i.e. marked as PAD).
I noticed this when I was working on duration filtering.
The bug is not deadly - it just results in lots of wasted
space in the buffer. All filtered events are left in
the buffer and marked as discarded, rather than being
removed from the buffer to make space for other events.
Unfortunately, when I fixed this bug, I got errors doing a
filtered function trace. Multiple TIME_EXTEND
events pile up in the buffer, and trigger the
following loop overage warning in rb_iter_peek():
again:
...
if (RB_WARN_ON(cpu_buffer, ++nr_loops > 10))
return NULL;
I'm not sure what the best way is to fix this. I don't
know if I should extend the loop threshhold, or if I should
make the test more complex (ignore TIME_EXTEND
events), or just get rid of this loop check completely.
Note that if I implement a workaround for this, then I
see another problem from rb_advance_iter(). I haven't
tracked that one down yet.
In general, it seems like the case of removing filtered
events has not been working properly, and so some assumptions
about buffer invariant conditions need to be revisited.
Here's the patch for the simple fix:
Compare correct pointer for checking if an event can be
freed rather than left as discarded in the buffer.
Signed-off-by: Tim Bird <tim.bird@am.sony.com>
LKML-Reference: <4A25BE9E.5090909@am.sony.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
This is a bit of micro-optimizations. But since the ring buffer is used
in tracing every function call, it is an extreme hot path. Every nanosecond
counts.
This change shows over 5% improvement in the ring-buffer-benchmark.
[ Impact: more efficient code ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The ring_buffer_time_stamp that is exported adds a little more overhead
than is needed for using it internally. This patch adds an internal
timestamp function that can be inlined (a single line function)
and used internally for the ring buffer.
[ Impact: a little less overhead to the ring buffer ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Doing some small changes in the fast path of the ring buffer recording
saves over 3% in the ring-buffer-benchmark test.
[ Impact: a little faster ring buffer recording ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The event length is calculated and passed in to rb_reserve_next_event
in two different locations. Having rb_reserve_next_event do the
calculations directly makes only one location to do the change and
causes the calculation to be inlined by gcc.
Before:
text data bss dec hex filename
16538 24 12 16574 40be kernel/trace/ring_buffer.o
After:
text data bss dec hex filename
16490 24 12 16526 408e kernel/trace/ring_buffer.o
[ Impact: smaller more efficient code ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The rb_reserve_next_event is only called for the data type (type = 0).
There is no reason to pass in the type to the function.
Before:
text data bss dec hex filename
16554 24 12 16590 40ce kernel/trace/ring_buffer.o
After:
text data bss dec hex filename
16538 24 12 16574 40be kernel/trace/ring_buffer.o
[ Impact: cleaner, smaller and slightly more efficient code ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
There's a WARN_ON in the ring buffer code that makes sure preemption
is disabled. It checks "!preempt_count()". But when CONFIG_PREEMPT is not
enabled, preempt_count() is always zero, and this will trigger the warning.
[ Impact: prevent false warning on non preemptible kernels ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Ingo Molnar thought the code would be cleaner if we used a function call
instead of a goto for moving the tail page. After implementing this,
it seems that gcc still inlines the result and the output is pretty much
the same. Since this is considered a cleaner approach, might as well
implement it.
[ Impact: code clean up ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The code in __rb_reserve_next checks on page overflow if it is the
original commiter and then resets the page back to the original
setting. Although this is fine, and the code is correct, it is
a bit fragil. Some experimental work I did breaks it easily.
The better and more robust solution is to have all commiters that
overflow the page, simply subtract what they added.
[ Impact: more robust ring buffer account management ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
In the hot path of the ring buffer "__rb_reserve_next" there's a big
if statement that does not even return back to the work flow.
code;
if (cross to next page) {
[ lots of code ]
return;
}
more code;
The condition is even the unlikely path, although we do not denote it
with an unlikely because gcc is fine with it. The condition is true when
the write crosses a page boundary, and we need to start at a new page.
Having this if statement makes it hard to read, but calling another
function to do the work is also not appropriate, because we are using a lot
of variables that were set before the if statement, and we do not want to
send them as parameters.
This patch changes it to a goto:
code;
if (cross to next page)
goto next_page;
more code;
return;
next_page:
[ lots of code]
This makes the code easier to understand, and a bit more obvious.
The output from gcc is practically identical. For some reason, gcc decided
to use different registers when I switched it to a goto. But other than that,
the logic is the same.
[ Impact: easier to read code ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
As a precaution, it is best to disable writing to the ring buffers
when reseting them.
[ Impact: prevent weird things if write happens during reset ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
In the swap page ring buffer code that is used by the ftrace splice code,
we scan the page to increment the counter of entries read.
With the number of entries already in the page we simply need to add it.
[ Impact: speed up reading page from ring buffer ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Currently, when the ring buffer writer overflows the buffer and must
write over non consumed data, we increment the overrun counter by
reading the entries on the page we are about to overwrite. This reads
the entries one by one.
This is not very effecient. This patch adds another entry counter
into each buffer page descriptor that keeps track of the number of
entries on the page. Now on overwrite, the overrun counter simply
needs to add the number of entries that is on the page it is about
to overwrite.
[ Impact: speed up of ring buffer in overwrite mode ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The entries counter in cpu buffer is not atomic. It can be updated by
other interrupts or from another CPU (readers).
But making entries into "atomic_t" causes an atomic operation that can
hurt performance. Instead we convert it to a local_t that will increment
a counter with a local CPU atomic operation (if the arch supports it).
Instead of fighting with readers and overwrites that decrement the counter,
I added a "read" counter. Every time a reader reads an entry it is
incremented.
We already have a overrun counter and with that, the entries counter and
the read counter, we can calculate the total number of entries in the
buffer with:
(entries - overrun) - read
As long as the total number of entries in the ring buffer is less than
the word size, this will work. But since the entries counter was previously
a long, this is no different than what we had before.
Thanks to Andrew Morton for pointing out in the first version that
atomic_t does not replace unsigned long. I switched to atomic_long_t
even though it is signed. A negative count is most likely a bug.
[ Impact: keep accurate count of cpu buffer entries ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The WARN_ON in the ring buffer when a commit is preempted and the
buffer is filled by preceding writes can happen in normal operations.
The WARN_ON makes it look like a bug, not to mention, because
it does not stop tracing and calls printk which can also recurse, this
is prone to deadlock (the WARN_ON is not in a position to recurse).
This patch removes the WARN_ON and replaces it with a counter that
can be retrieved by a tracer. This counter is called commit_overrun.
While at it, I added a nmi_dropped counter to count any time an NMI entry
is dropped because the NMI could not take the spinlock.
[ Impact: prevent deadlock by printing normal case warning ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
I'm adding a module to do a series of tests on the ring buffer as well
as benchmarks. This module needs to have more of the ring buffer API
exported. There's nothing wrong with reading the ring buffer from a
module.
[ Impact: allow modules to read pages from the ring buffer ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The warning output in trace_recursive_lock uses %d for a long when
it should be %ld.
[ Impact: fix compile warning ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
RB_MAX_SMALL_DATA = 28bytes is too small for most tracers, it wastes
an 'u32' to save the actually length for events which data size > 28.
This fix uses compressed event header and enlarges RB_MAX_SMALL_DATA.
[ Impact: saves about 0%-12.5%(depends on tracer) memory in ring_buffer ]
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
LKML-Reference: <49F13189.3090000@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
On boot up, to save memory, ftrace allocates the minimum buffer
which is two pages. Ftrace also goes through a series of tests
(when configured) on boot up. These tests can fill up a page within
a single interrupt.
The ring buffer also has a WARN_ON when it detects that the buffer was
completely filled within a single commit (other commits are allowed to
be nested).
Combine the small buffer on start up, with the tests that can fill more
than a single page within an interrupt, this can trigger the WARN_ON.
This patch makes the WARN_ON only happen when the ring buffer consists
of more than two pages.
[ Impact: prevent false WARN_ON in ftrace startup tests ]
Reported-by: Ingo Molnar <mingo@elte.hu>
LKML-Reference: <20090421094616.GA14561@elte.hu>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Althought using the irq level (hardirq_count, softirq_count and in_nmi)
was nice to detect bad recursion right away, but since the counters are
not atomically updated with respect to the interrupts, the function tracer
might trigger the test from an interrupt handler before the hardirq_count
is updated. This will trigger a false warning.
This patch converts the recursive detection to a simple counter.
If the depth is greater than 16 then the recursive detection will trigger.
16 is more than enough for any nested interrupts.
[ Impact: fix false positive trace recursion detection ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The ring_buffer_event_discard is not tied to ring_buffer_lock_reserve.
It can be called inside or outside the reserve/commit. Even if it
is called inside the reserve/commit the commit part must also be called.
Only ring_buffer_discard_commit can be used as a replacement for
ring_buffer_unlock_commit.
This patch removes the trace_recursive_unlock from ring_buffer_event_discard
since it would be the wrong place to do so.
[Impact: prevent breakage in trace recursive testing ]
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The recursive tests to detect same level recursion in the ring buffers
did not account for the hard/softirq_counts to be shifted. Thus the
numbers could be larger than then mask to be tested.
This patch includes the shift for the calculation of the irq depth.
[ Impact: stop false positives in trace recursion detection ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
In case of tracing recursion detection, we only get the stacktrace.
But the current context may be very useful to debug the issue.
This patch adds the softirq/hardirq/nmi context with the warning
using lockdep context display to have a familiar output.
v2: Use printk_once()
v3: drop {hardirq,softirq}_context which depend on lockdep,
only keep what is part of current->trace_recursion,
sufficient to debug the warning source.
[ Impact: print context necessary to debug recursion ]
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
The tracing infrastructure allows for recursion. That is, an interrupt
may interrupt the act of tracing an event, and that interrupt may very well
perform its own trace. This is a recursive trace, and is fine to do.
The problem arises when there is a bug, and the utility doing the trace
calls something that recurses back into the tracer. This recursion is not
caused by an external event like an interrupt, but by code that is not
expected to recurse. The result could be a lockup.
This patch adds a bitmask to the task structure that keeps track
of the trace recursion. To find the interrupt depth, the following
algorithm is used:
level = hardirq_count() + softirq_count() + in_nmi;
Here, level will be the depth of interrutps and softirqs, and even handles
the nmi. Then the corresponding bit is set in the recursion bitmask.
If the bit was already set, we know we had a recursion at the same level
and we warn about it and fail the writing to the buffer.
After the data has been committed to the buffer, we clear the bit.
No atomics are needed. The only races are with interrupts and they reset
the bitmask before returning anywy.
[ Impact: detect same irq level trace recursion ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Currently, every thing needed to read the binary output from the
ring buffers is available, with the exception of the way the ring
buffers handles itself internally.
This patch creates two special files in the debugfs/tracing/events
directory:
# cat /debug/tracing/events/header_page
field: u64 timestamp; offset:0; size:8;
field: local_t commit; offset:8; size:8;
field: char data; offset:16; size:4080;
# cat /debug/tracing/events/header_event
type : 2 bits
len : 3 bits
time_delta : 27 bits
array : 32 bits
padding : type == 0
time_extend : type == 1
data : type == 3
This is to allow a userspace app to see if the ring buffer format changes
or not.
[ Impact: allow userspace apps to know of ringbuffer format changes ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The ring_buffer_discard_commit is similar to ring_buffer_event_discard
but it can only be done on an event that has yet to be commited.
Unpredictable results can happen otherwise.
The main difference between ring_buffer_discard_commit and
ring_buffer_event_discard is that ring_buffer_discard_commit will try
to free the data in the ring buffer if nothing has addded data
after the reserved event. If something did, then it acts almost the
same as ring_buffer_event_discard followed by a
ring_buffer_unlock_commit.
Note, either ring_buffer_commit_discard and ring_buffer_unlock_commit
can be called on an event, not both.
This commit also exports both discard functions to be usable by
GPL modules.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup
Most of the tracing files creation follow the same pattern:
ret = debugfs_create_file(...)
if (!ret)
pr_warning("Couldn't create ... entry\n")
Unify it!
Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1238109938-11840-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Impact: prevent possible memory leak
The reader page of the ring buffer is special. Although it points
into the ring buffer, it is not part of the actual buffer. It is
a page used by the reader to swap with a page in the ring buffer.
Once the swap is made, the new reader page is again outside the
buffer.
Even though the reader page points into the buffer, it is really
pointing to residual data. Note, this data is used by the reader.
reader page
|
v
(prev) +---+ (next)
+----------| |----------+
| +---+ |
v v
+---+ +---+ +---+
-->| |------->| |------->| |--->
<--| |<-------| |<-------| |<---
+---+ +---+ +---+
^ ^ ^
\ | /
------- Buffer---------
If we perform a list_del_init() on the reader page we will actually remove
the last page the reader swapped with and not the reader page itself.
This will cause that page to not be freed, and thus is a memory leak.
Luckily, the only user of the ring buffer so far is ftrace. And ftrace
will not free its ring buffer after it allocates it. There is no current
possible memory leak. But once there are other users, or if ftrace
dynamically creates and frees its ring buffer, then this would be a
memory leak.
This patch fixes the leak for future cases.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This patch overloads RINGBUF_TYPE_PADDING to provide a way to discard
events from the ring buffer, for the event-filtering mechanism
introduced in a subsequent patch.
I did the initial version but thanks to Steven Rostedt for adding
the parts that actually made it work. ;-)
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: remove a section warning
CONFIG_DEBUG_SECTION_MISMATCH raises the following warning on -tip:
WARNING: kernel/trace/built-in.o(.text+0x5bc5): Section mismatch in
reference from the function ring_buffer_alloc() to the function
.cpuinit.text:rb_cpu_notify()
The function ring_buffer_alloc() references
the function __cpuinit rb_cpu_notify().
This is actually harmless. The code in the ring buffer don't build
rb_cpu_notify and other cpu hotplug stuffs when !CONFIG_HOTPLUG_CPU
so we have no risk to reference freed memory here (it would even
be harmless if we unconditionally build it because register_cpu_notifier
would do nothing when !CONFIG_HOTPLUG_CPU.
But since ring_buffer_alloc() can be called everytime, we don't want it
to be annotated with __cpuinit so we drop the __cpuinit from
rb_cpu_notify.
This is not a waste of memory because it is only defined and used on
CONFIG_HOTPLUG_CPU.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <1237606416-22268-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: fix warning with irqsoff tracer
The ring buffer allocates its buffers on pre-smp time (early_initcall).
It means that, at first, only the boot cpu buffer is allocated and
the ring-buffer cpumask only has the boot cpu set (cpu_online_mask).
Later, the secondary cpu will show up and the ring-buffer will be notified
about this event: the appropriate buffer will be allocated and the cpumask
will be updated.
Unfortunately, if !CONFIG_CPU_HOTPLUG, the ring-buffer will not be
notified about the secondary cpus, meaning that the cpumask will have
only the cpu boot set, and only one cpu buffer allocated.
We fix that by using cpu_possible_mask if !CONFIG_CPU_HOTPLUG.
This patch fixes the following warning with irqsoff tracer running:
[ 169.317794] WARNING: at kernel/trace/trace.c:466 update_max_tr_single+0xcc/0xf3()
[ 169.318002] Hardware name: AMILO Li 2727
[ 169.318002] Modules linked in:
[ 169.318002] Pid: 5624, comm: bash Not tainted 2.6.29-rc8-tip-02636-g6aafa6c #11
[ 169.318002] Call Trace:
[ 169.318002] [<ffffffff81036182>] warn_slowpath+0xea/0x13d
[ 169.318002] [<ffffffff8100b9d6>] ? ftrace_call+0x5/0x2b
[ 169.318002] [<ffffffff8100b9d6>] ? ftrace_call+0x5/0x2b
[ 169.318002] [<ffffffff8100b9d1>] ? ftrace_call+0x0/0x2b
[ 169.318002] [<ffffffff8101ef10>] ? ftrace_modify_code+0xa9/0x108
[ 169.318002] [<ffffffff8106e27f>] ? trace_hardirqs_off+0x25/0x27
[ 169.318002] [<ffffffff8149afe7>] ? _spin_unlock_irqrestore+0x1f/0x2d
[ 169.318002] [<ffffffff81064f52>] ? ring_buffer_reset_cpu+0xf6/0xfb
[ 169.318002] [<ffffffff8106637c>] ? ring_buffer_reset+0x36/0x48
[ 169.318002] [<ffffffff8106aeda>] update_max_tr_single+0xcc/0xf3
[ 169.318002] [<ffffffff8100bc17>] ? sysret_check+0x22/0x5d
[ 169.318002] [<ffffffff8106e3ea>] stop_critical_timing+0x142/0x204
[ 169.318002] [<ffffffff8106e4cf>] trace_hardirqs_on_caller+0x23/0x25
[ 169.318002] [<ffffffff8149ac28>] trace_hardirqs_on_thunk+0x3a/0x3c
[ 169.318002] [<ffffffff8100bc17>] ? sysret_check+0x22/0x5d
[ 169.318002] ---[ end trace db76cbf775a750cf ]---
Because this tracer may try to swap two cpu ring buffers for an
unregistered cpu on the ring buffer.
This patch might also fix a fair loss of traces due to unallocated buffers
for secondary cpus.
Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-b: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <1237470453-5427-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This patch adds a new function called ring_buffer_set_clock that
allows a tracer to assign its own clock source to the buffer.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
In a private email conversation I explained how the ring buffer
page worked by using silly ASCII art. Ingo suggested that I add
that to the comments of the code.
Here it is.
Requested-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Impact: speed up and remove possible races
The get_online_cpus was added to the ring buffer because the original
design would free the ring buffer on a CPU that was being taken
off line. The final design kept the ring buffer around even when the
CPU was taken off line. This is to allow a user to still read the
information on that ring buffer.
Most of the get_online_cpus are no longer needed since the ring buffer will
not disappear from the use cases.
Reported-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
The hotplug code in the ring buffers is for use with CPU hotplug,
not generic hotplug.
Reported-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Impact: save on memory
Currently, a ring buffer was allocated for each "possible_cpus". On
some systems, this is the same as NR_CPUS. Thus, if a system defined
NR_CPUS = 64 but it only had 1 CPU, we could have possibly 63 useless
ring buffers taking up space. With a default buffer of 3 megs, this
could be quite drastic.
This patch changes the ring buffer code to only allocate ring buffers
for online CPUs. If a CPU goes off line, we do not free the buffer.
This is because the user may still have trace data in that buffer
that they would like to look at.
Perhaps in the future we could add code to delete a ring buffer if
the CPU is offline and the ring buffer becomes empty.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Impact: cleanup
All file_operations structures should be constant. No one is going to
change them.
Reported-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
If a partial ring_buffer_page_read happens, then some of the
incremental timestamps may be lost. This patch writes the
recent timestamp into the page that is passed back to the caller.
A partial ring_buffer_page_read is where the full page would not
be written back to the user, and instead, just part of the page
is copied to the user. A full page would be a page swap with the
ring buffer and the timestamps would be correct.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Impact: dont leave holes in read buffer page
The ring_buffer_read_page swaps a given page with the reader page
of the ring buffer, if certain conditions are set:
1) requested length is big enough to hold entire page data
2) a writer is not currently on the page
3) the page is not partially consumed.
Instead of swapping with the supplied page. It copies the data to
the supplied page instead. But currently the data is copied in the
same offset as the source page. This causes a hole at the start
of the reader page. This complicates the use of this function.
Instead, it should copy the data at the beginning of the function
and update the index fields accordingly.
Other small clean ups are also done in this patch.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Impact: fix to possible alignment problems on some archs.
Some arch compilers include an NULL char array in the sizeof field.
Since the ring_buffer_event type includes one of these, it is better
to use the "offsetof" instead, to avoid strange bugs on these archs.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
The ring_buffer_read_page was broken if it were to only copy part
of the page. This patch fixes that up as well as adds a parameter
to allow a length field, in order to only copy part of the buffer page.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Impact: fix ring_buffer_read_page
After a page is swapped into the ring buffer, the write field must
also be reset.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Impact: implement new tracing timestamp APIs
Add three trace clock variants, with differing scalability/precision
tradeoffs:
- local: CPU-local trace clock
- medium: scalable global clock with some jitter
- global: globally monotonic, serialized clock
Make the ring-buffer use the local trace clock internally.
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: clean up
While reviewing the ring buffer code, I thougth I saw a bug with
if (!__raw_spin_trylock(&cpu_buffer->lock))
goto out_unlock;
But I forgot that we use a variable "lock_taken" that is set if
the spinlock is taken, and only unlock it if that variable is set.
To avoid further confusion from other reviewers, this patch
renames the label out_unlock with out_reset, which is the more
appropriate name.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Fix these sparse warnings:
kernel/trace/ring_buffer.c:70:37: warning: incorrect type in argument 2 (different signedness)
kernel/trace/ring_buffer.c:84:39: warning: incorrect type in argument 2 (different signedness)
kernel/trace/ring_buffer.c:96:43: warning: incorrect type in argument 2 (different signedness)
kernel/trace/ring_buffer.c:2475:13: warning: incorrect type in argument 2 (different signedness)
kernel/trace/ring_buffer.c:2475:13: warning: incorrect type in argument 2 (different signedness)
kernel/trace/ring_buffer.c:2478:42: warning: incorrect type in argument 2 (different signedness)
kernel/trace/ring_buffer.c:2478:42: warning: incorrect type in argument 2 (different signedness)
kernel/trace/ring_buffer.c:2500:40: warning: incorrect type in argument 3 (different signedness)
kernel/trace/ring_buffer.c:2505:44: warning: incorrect type in argument 2 (different signedness)
kernel/trace/ring_buffer.c:2507:46: warning: incorrect type in argument 2 (different signedness)
kernel/trace/trace.c:2130:40: warning: incorrect type in argument 3 (different signedness)
kernel/trace/trace.c:2280:40: warning: incorrect type in argument 3 (different signedness)
Signed-off-by: Hannes Eder <hannes@hanneseder.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: change API and init bpage when copy
ring_buffer_read_page()/rb_remove_entries() may be called for
a partially consumed page.
Add a parameter for rb_remove_entries() and make it update
cpu_buffer->entries correctly for partially consumed pages.
ring_buffer_read_page() now returns the offset to the next event.
Init the bpage's time_stamp when return value is 0.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Impact: Fix bug
I found several very very curious line.
It's so curious that it may be brought by typing mistake.
When (cpu_buffer->reader_page == cpu_buffer->commit_page):
1) We haven't copied it for bpage is changed:
bpage = cpu_buffer->reader_page->page;
memcpy(bpage->data, cpu_buffer->reader_page->page->data + read ... )
2) We need update cpu_buffer->reader_page->read, but
"cpu_buffer->reader_page += read;" is not right.
[
This bug was a typo. The commit->reader_page is a page pointer
and not an index into the page. The line should have been
commit->reader_page->read += read. The other changes
by Lai are nice clean ups to the code. - SDR
]
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Impact: clean up
Now that a generic in_nmi is available, this patch removes the
special code in the ring_buffer and implements the in_nmi generic
version instead.
With this change, I was also able to rename the "arch_ftrace_nmi_enter"
back to "ftrace_nmi_enter" and remove the code from the ring buffer.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Impact: prevent deadlock in NMI
The ring buffers are not yet totally lockless with writing to
the buffer. When a writer crosses a page, it grabs a per cpu spinlock
to protect against a reader. The spinlocks taken by a writer are not
to protect against other writers, since a writer can only write to
its own per cpu buffer. The spinlocks protect against readers that
can touch any cpu buffer. The writers are made to be reentrant
with the spinlocks disabling interrupts.
The problem arises when an NMI writes to the buffer, and that write
crosses a page boundary. If it grabs a spinlock, it can be racing
with another writer (since disabling interrupts does not protect
against NMIs) or with a reader on the same CPU. Luckily, most of the
users are not reentrant and protects against this issue. But if a
user of the ring buffer becomes reentrant (which is what the ring
buffers do allow), if the NMI also writes to the ring buffer then
we risk the chance of a deadlock.
This patch moves the ftrace_nmi_enter called by nmi_enter() to the
ring buffer code. It replaces the current ftrace_nmi_enter that is
used by arch specific code to arch_ftrace_nmi_enter and updates
the Kconfig to handle it.
When an NMI is called, it will set a per cpu variable in the ring buffer
code and will clear it when the NMI exits. If a write to the ring buffer
crosses page boundaries inside an NMI, a trylock is used on the spin
lock instead. If the spinlock fails to be acquired, then the entry
is discarded.
This bug appeared in the ftrace work in the RT tree, where event tracing
is reentrant. This workaround solved the deadlocks that appeared there.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Impact: fix bad times of recent resets
The ring buffer needs to reset its timestamps when reseting of the
buffer, otherwise the timestamps are stale and might be used to
calculate times in the buffer causing funny timestamps to appear.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: fix bad times of recent resets
The ring buffer needs to reset its timestamps when reseting of the
buffer, otherwise the timestamps are stale and might be used to
calculate times in the buffer causing funny timestamps to appear.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
If the ring buffer recording has been disabled. Do not let
swapping of ring buffers occur. Simply return -EAGAIN.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: reset struct buffer_page.write when interrupt storm
if struct buffer_page.write is not reset, any succedent committing
will corrupted ring_buffer:
static inline void
rb_set_commit_to_write(struct ring_buffer_per_cpu *cpu_buffer)
{
......
cpu_buffer->commit_page->commit =
cpu_buffer->commit_page->write;
......
}
when "if (RB_WARN_ON(cpu_buffer, next_page == reader_page))", ring_buffer
is disabled, but some reserved buffers may haven't been committed.
we need reset struct buffer_page.write.
when "if (unlikely(next_page == cpu_buffer->commit_page))", ring_buffer
is still available, we should not corrupt it.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: fix to allow some archs to use the ring buffer
Commits in the ring buffer are checked by pointer arithmetic.
If the calculation is incorrect, then the commits will never take
place and the buffer will simply fill up and report an error.
Each page in the ring buffer has a small header:
struct buffer_data_page {
u64 time_stamp;
local_t commit;
unsigned char data[];
};
Unfortuntely, some of the calculations used sizeof(struct buffer_data_page)
to know the size of the header. But this is incorrect on some archs,
where sizeof(struct buffer_data_page) does not equal
offsetof(struct buffer_data_page, data), and on those archs, the commits
are never processed.
This patch replaces the sizeof with offsetof.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: reset struct buffer_page.write when interrupt storm
if struct buffer_page.write is not reset, any succedent committing
will corrupted ring_buffer:
static inline void
rb_set_commit_to_write(struct ring_buffer_per_cpu *cpu_buffer)
{
......
cpu_buffer->commit_page->commit =
cpu_buffer->commit_page->write;
......
}
when "if (RB_WARN_ON(cpu_buffer, next_page == reader_page))", ring_buffer
is disabled, but some reserved buffers may haven't been committed.
we need reset struct buffer_page.write.
when "if (unlikely(next_page == cpu_buffer->commit_page))", ring_buffer
is still available, we should not corrupt it.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rric/oprofile: (31 commits)
powerpc/oprofile: fix whitespaces in op_model_cell.c
powerpc/oprofile: IBM CELL: add SPU event profiling support
powerpc/oprofile: fix cell/pr_util.h
powerpc/oprofile: IBM CELL: cleanup and restructuring
oprofile: make new cpu buffer functions part of the api
oprofile: remove #ifdef CONFIG_OPROFILE_IBS in non-ibs code
ring_buffer: fix ring_buffer_event_length()
oprofile: use new data sample format for ibs
oprofile: add op_cpu_buffer_get_data()
oprofile: add op_cpu_buffer_add_data()
oprofile: rework implementation of cpu buffer events
oprofile: modify op_cpu_buffer_read_entry()
oprofile: add op_cpu_buffer_write_reserve()
oprofile: rename variables in add_ibs_begin()
oprofile: rename add_sample() in cpu_buffer.c
oprofile: rename variable ibs_allowed to has_ibs in op_model_amd.c
oprofile: making add_sample_entry() inline
oprofile: remove backtrace code for ibs
oprofile: remove unused ibs macro
oprofile: remove unused components in struct oprofile_cpu_buffer
...
Function ring_buffer_event_length() provides an interface to detect
the length of data stored in an entry. However, the length contains
offsets depending on the internal usage. This makes it unusable. This
patch fixes this and now ring_buffer_event_length() returns the
alligned length that has been used in ring_buffer_lock_reserve().
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Robert Richter <robert.richter@amd.com>
Impact: Reduce future memory usage, use new cpumask API.
(Eventually, cpumask_var_t will be allocated based on nr_cpu_ids, not NR_CPUS).
Convert kernel trace functions to use struct cpumask API:
1) Use cpumask_copy/cpumask_test_cpu/for_each_cpu.
2) Use cpumask_var_t and alloc_cpumask_var/free_cpumask_var everywhere.
3) Use on_each_cpu instead of playing with current->cpus_allowed.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Mike Travis <travis@sgi.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
* 'oprofile-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
oprofile: select RING_BUFFER
ring_buffer: adding EXPORT_SYMBOLs
oprofile: fix lost sample counter
oprofile: remove nr_available_slots()
oprofile: port to the new ring_buffer
ring_buffer: add remaining cpu functions to ring_buffer.h
oprofile: moving cpu_buffer_reset() to cpu_buffer.h
oprofile: adding cpu_buffer_entries()
oprofile: adding cpu_buffer_write_commit()
oprofile: adding cpu buffer r/w access functions
ftrace: remove unused function arg in trace_iterator_increment()
ring_buffer: update description for ring_buffer_alloc()
oprofile: set values to default when creating oprofilefs
oprofile: implement switch/case in buffer_sync.c
x86/oprofile: cleanup IBS init/exit functions in op_model_amd.c
x86/oprofile: reordering IBS code in op_model_amd.c
oprofile: fix typo
oprofile: whitspace changes only
oprofile: update comment for oprofile_add_sample()
oprofile: comment cleanup
Impact: eliminate false WARN_ON message
If an interrupt goes off after the setting of the local variable
tail_page and before incrementing the write index of that page,
the interrupt could push the commit forward to the next page.
Later a check is made to see if interrupts pushed the buffer around
the entire ring buffer by comparing the next page to the last commited
page. This can produce a false positive if the interrupt had pushed
the commit page forward as stated above.
Thanks to Jiaying Zhang for finding this race.
Reported-by: Jiaying Zhang <jiayingz@google.com>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Cc: <stable@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: fix stuck trace-buffers
If an interrupt comes in during the rb_set_commit_to_write and
pushes the tail page forward just at the right time, the commit
updates will miss the adding of the interrupt data. This will
cause the commit pointer to cease from moving forward.
Thanks to Jiaying Zhang for finding this race.
Reported-by: Jiaying Zhang <jiayingz@google.com>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Cc: <stable@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: remove dead code
struct ring_buffer.size is not set after ring_buffer is initialized
or resized. it is always 0.
we can use "buffer->pages * PAGE_SIZE" to get ring_buffer's size
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: prevent a trace recursion
After some tests with function graph tracer under x86-32, I saw some recursions
caused by ring_buffer_time_stamp() that calls preempt_enable_no_notrace() which
calls preempt_schedule() which is traced itself.
This patch re-enables preemption without rescheduling.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
I added EXPORT_SYMBOL_GPLs for all functions part of the API
(ring_buffer.h). This is required since oprofile is using the ring
buffer and the compilation as modules would fail otherwise.
Signed-off-by: Robert Richter <robert.richter@amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: clean up
Andrew Morton pointed out that the kernel convention of a variable
named page should be of type page struct. The ring buffer uses
a variable named "page" for a pointer to something else.
This patch converts those to be called "bpage" (as in "buffer page").
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: new API to ring buffer
This patch adds a new interface into the ring buffer that allows a
page to be read from the ring buffer on a given CPU. For every page
read, one must also be given to allow for a "swap" of the pages.
rpage = ring_buffer_alloc_read_page(buffer);
if (!rpage)
goto err;
ret = ring_buffer_read_page(buffer, &rpage, cpu, full);
if (!ret)
goto empty;
process_page(rpage);
ring_buffer_free_read_page(rpage);
The caller of these functions must handle any waits that are
needed to wait for new data. The ring_buffer_read_page will simply
return 0 if there is no data, or if "full" is set and the writer
is still on the current page.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: get ready for splice changes
This patch moves the commit and timestamp into the beginning of each
data page of the buffer. This change will allow the page to be moved
to another location (disk, network, etc) and still have information
in the page to be able to read it.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: prevent unnecessary stack recursion
if the resched flag was set before we entered, then don't reschedule.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: feature to permanently disable ring buffer
This patch adds a API to the ring buffer code that will permanently
disable the ring buffer from ever recording. This should only be
called when some serious anomaly is detected, and the system
may be in an unstable state. When that happens, shutting down the
recording to the ring buffers may be appropriate.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: fix tracing buffer mutex leak in case of allocation failure
This error was spotted by this semantic patch:
http://www.emn.fr/x-info/coccinelle/mut.html
It looks correct as far as I can tell. Please review.
Signed-off-by: Vegard Nossum <vegard.nossum@gmail.com>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Pekka reported a crash when resizing the mmiotrace tracer (if only
mmiotrace is enabled).
This happens because in that case we do not allocate the max buffer,
but we try to use it.
Make ring_buffer_resize() idempotent against NULL buffers.
Reported-by: Pekka Paalanen <pq@iki.fi>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: deadlock fix in ring_buffer_read_start
The ring_buffer_iter_reset was called from ring_buffer_read_start
where both grabbed the reader_lock.
This patch separates out the internals of ring_buffer_iter_reset
to its own function so that both APIs may grab the reader_lock.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: disable preemption when calling sched_clock()
The ring_buffer_time_stamp still uses sched_clock as its counter.
But it is a bug to call it with preemption enabled. This requirement
should not be pushed to the ring_buffer_time_stamp callers, so
the ring_buffer_time_stamp needs to disable preemption when calling
sched_clock.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: Restructure WARN_ONs in ring_buffer.c
The current WARN_ON macros in ring_buffer.c are quite ugly.
This patch cleans them up and uses a single RB_WARN_ON that returns
the value of the condition. This allows the caller to abort the
function if the condition is true.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: enable/disable ring buffer recording API added
Several kernel developers have requested that there be a way to stop
recording into the ring buffers with a simple switch that can also
be enabled from userspace. This patch addes a new kernel API to the
ring buffers called:
tracing_on()
tracing_off()
When tracing_off() is called, all ring buffers will not be able to record
into their buffers.
tracing_on() will enable the ring buffers again.
These two act like an on/off switch. That is, there is no counting of the
number of times tracing_off or tracing_on has been called.
A new file is added to the debugfs/tracing directory called
tracing_on
This allows for userspace applications to also flip the switch.
echo 0 > debugfs/tracing/tracing_on
disables the tracing.
echo 1 > /debugfs/tracing/tracing_on
enables it.
Note, this does not disable or enable any tracers. It only sets or clears
a flag that needs to be set in order for the ring buffers to write to
their buffers. It is a global flag, and affects all ring buffers.
The buffers start out with tracing_on enabled.
There are now three flags that control recording into the buffers:
tracing_on: which affects all ring buffer tracers.
buffer->record_disabled: which affects an allocated buffer, which may be set
if an anomaly is detected, and tracing is disabled.
cpu_buffer->record_disabled: which is set by tracing_stop() or if an
anomaly is detected. tracing_start can not reenable this if
an anomaly occurred.
The userspace debugfs/tracing/tracing_enabled is implemented with
tracing_stop() but the user space code can not enable it if the kernel
called tracing_stop().
Userspace can enable the tracing_on even if the kernel disabled it.
It is just a switch used to stop tracing if a condition was hit.
tracing_on is not for protecting critical areas in the kernel nor is
it for stopping tracing if an anomaly occurred. This is because userspace
can reenable it at any time.
Side effect: With this patch, I discovered a dead variable in ftrace.c
called tracing_on. This patch removes it.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Impact: serialize reader accesses to individual CPU ring buffers
The code in the ring buffer expects only one reader at a time, but currently
it puts that requirement on the caller. This is not strong enough, and this
patch adds a "reader_lock" that serializes the access to the reader API
of the ring buffer.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This patch replaces most of the BUG_ONs in the ring_buffer code with
RB_WARN_ON variants. It adds some more variants as needed for the
replacement. This lets the buffer die nicely and still warn the user.
One BUG_ON remains in the code, and that is because it detects a
bad pointer passed in by the calling function, and not a bug by
the ring buffer code itself.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: removal of unnecessary looping
The lockless part of the ring buffer allows for reentry into the code
from interrupts. A timestamp is taken, a test is preformed and if it
detects that an interrupt occurred that did tracing, it tries again.
The problem arises if the timestamp code itself causes a trace.
The detection will detect this and loop again. The difference between
this and an interrupt doing tracing, is that this will fail every time,
and cause an infinite loop.
Currently, we test if the loop happens 1000 times, and if so, it will
produce a warning and disable the ring buffer.
The problem with this approach is that it makes it difficult to perform
some types of tracing (tracing the timestamp code itself).
Each trace entry has a delta timestamp from the previous entry.
If a trace entry is reserved but and interrupt occurs and traces before
the previous entry is commited, the delta timestamp for that entry will
be zero. This actually makes sense in terms of tracing, because the
interrupt entry happened before the preempted entry was commited, so
one may consider the two happening at the same time. The order is
still preserved in the buffer.
With this idea, instead of trying to get a new timestamp if an interrupt
made it in between the timestamp and the test, the entry could simply
make the delta zero and continue. This will prevent interrupts or
tracers in the timer code from causing the above loop.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Impact: no lockdep debugging of ring buffer
The problem with running lockdep on the ring buffer is that the
ring buffer is the core infrastructure of ftrace. What happens is
that the tracer will start tracing the lockdep code while lockdep
is testing the ring buffers locks. This can cause lockdep to
fail due to testing cases that have not fully finished their
locking transition.
This patch converts the spin locks used by the ring buffer back
into raw spin locks which lockdep does not check.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: use new, consolidated APIs in ftrace plugins
This patch replaces the schedule safe preempt disable code with the
ftrace_preempt_disable() and ftrace_preempt_enable() safe functions.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
While writing a new tracer, I had a bug where I caused the ring-buffer
to recurse in a bad way. The bug was with the tracer I was writing
and not the ring-buffer itself. But it took a long time to find the
problem.
This patch adds paranoid checks into the ring-buffer infrastructure
that will catch bugs of this nature.
Note: I put the bug back in the tracer and this patch showed the error
nicely and prevented the lockup.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
A powerpc ppc64_defconfig build produces these warnings:
kernel/trace/ring_buffer.c: In function 'rb_add_time_stamp':
kernel/trace/ring_buffer.c:969: warning: format '%llu' expects type 'long long unsigned int', but argument 2 has type 'u64'
kernel/trace/ring_buffer.c:969: warning: format '%llu' expects type 'long long unsigned int', but argument 3 has type 'u64'
kernel/trace/ring_buffer.c:969: warning: format '%llu' expects type 'long long unsigned int', but argument 4 has type 'u64'
Just cast the u64s to unsigned long long like we do everywhere else.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The pages of a buffer was originally pointing to the page struct, it
now points to the page address. The freeing of the page still uses
the page frame free "__free_page" instead of the correct free_page to
the address.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This patch replaces the local_irq_save/restore with preempt_disable/
enable. This allows for interrupts to enter while recording.
To write to the ring buffer, you must reserve data, and then
commit it. During this time, an interrupt may call a trace function
that will also record into the buffer before the commit is made.
The interrupt will reserve its entry after the first entry, even
though the first entry did not finish yet.
The time stamp delta of the interrupt entry will be zero, since
in the view of the trace, the interrupt happened during the
first field anyway.
Locking still takes place when the tail/write moves from one page
to the next. The reader always takes the locks.
A new page pointer is added, called the commit. The write/tail will
always point to the end of all entries. The commit field will
point to the last committed entry. Only this commit entry may
update the write time stamp.
The reader can only go up to the commit. It cannot go past it.
If a lot of interrupts come in during a commit that fills up the
buffer, and it happens to make it all the way around the buffer
back to the commit, then a warning is printed and new events will
be dropped.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Remove the global head and tail indexes and move them into the
page header. Each page will now keep track of where the last
write and read was made. We also rename the head and tail to read
and write for better clarification.
This patch is needed for future enhancements to move the ring buffer
to a lockless solution.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
My original patch had a compile bug when NUMA was configured. I
referenced cpu when it should have been cpu_buffer->cpu.
Ingo quickly fixed this bug by replacing cpu with 'i' because that
was the loop counter. Unfortunately, the 'i' was the counter of
pages, not CPUs. This caused a crash when the number of pages allocated
for the buffers exceeded the number of pages, which would usually
be the case.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
fix:
kernel/trace/ring_buffer.c: In function ‘rb_allocate_pages’:
kernel/trace/ring_buffer.c:235: error: ‘cpu’ undeclared (first use in this function)
kernel/trace/ring_buffer.c:235: error: (Each undeclared identifier is reported only once
kernel/trace/ring_buffer.c:235: error: for each function it appears in.)
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The current method of overlaying the page frame as the buffer page pointer
can be very dangerous and limits our ability to do other things with
a page from the buffer, like send it off to disk.
This patch allocates the buffer_page instead of overlaying the page's
page frame. The use of the buffer_page has hardly changed due to this.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The old "lock always" scheme had issues with lockdep, and was not very
efficient anyways.
This patch does a new design to be partially lockless on writes.
Writes will add new entries to the per cpu pages by simply disabling
interrupts. When a write needs to go to another page than it will
grab the lock.
A new "read page" has been added so that the reader can pull out a page
from the ring buffer to read without worrying about the writer writing over
it. This allows us to not take the lock for all reads. The lock is
now only taken when a read needs to go to a new page.
This is far from lockless, and interrupts still need to be disabled,
but it is a step towards a more lockless solution, and it also
solves a lot of the issues that were noticed by the first conversion
of ftrace to the ring buffers.
Note: the ring_buffer_{un}lock API has been removed.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The raw_local_irq_save causes issues with lockdep. We don't need it
so replace them with local_irq_save.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Mathieu Desnoyers pointed out that the freeing of the page frame needs
to be reset otherwise we might trigger BUG_ON in the page free code.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
If for some strange reason the buffer_page gets bigger, or the page struct
gets smaller, I want to know this ASAP. The best way is to not let the
kernel compile.
This patch adds code to test the size of the struct buffer_page against the
page struct and will cause compile issues if the buffer_page ever gets bigger
than the page struct.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This is a unified tracing buffer that implements a ring buffer that
hopefully everyone will eventually be able to use.
The events recorded into the buffer have the following structure:
struct ring_buffer_event {
u32 type:2, len:3, time_delta:27;
u32 array[];
};
The minimum size of an event is 8 bytes. All events are 4 byte
aligned inside the buffer.
There are 4 types (all internal use for the ring buffer, only
the data type is exported to the interface users).
RINGBUF_TYPE_PADDING: this type is used to note extra space at the end
of a buffer page.
RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events
is greater than the 27 bit delta can hold. We add another
32 bits, and record that in its own event (8 byte size).
RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to
help keep the buffer timestamps in sync.
RINGBUF_TYPE_DATA: The event actually holds user data.
The "len" field is only three bits. Since the data must be
4 byte aligned, this field is shifted left by 2, giving a
max length of 28 bytes. If the data load is greater than 28
bytes, the first array field holds the full length of the
data load and the len field is set to zero.
Example, data size of 7 bytes:
type = RINGBUF_TYPE_DATA
len = 2
time_delta: <time-stamp> - <prev_event-time-stamp>
array[0..1]: <7 bytes of data> <1 byte empty>
This event is saved in 12 bytes of the buffer.
An event with 82 bytes of data:
type = RINGBUF_TYPE_DATA
len = 0
time_delta: <time-stamp> - <prev_event-time-stamp>
array[0]: 84 (Note the alignment)
array[1..14]: <82 bytes of data> <2 bytes empty>
The above event is saved in 92 bytes (if my math is correct).
82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length.
Do not reference the above event struct directly. Use the following
functions to gain access to the event table, since the
ring_buffer_event structure may change in the future.
ring_buffer_event_length(event): get the length of the event.
This is the size of the memory used to record this
event, and not the size of the data pay load.
ring_buffer_time_delta(event): get the time delta of the event
This returns the delta time stamp since the last event.
Note: Even though this is in the header, there should
be no reason to access this directly, accept
for debugging.
ring_buffer_event_data(event): get the data from the event
This is the function to use to get the actual data
from the event. Note, it is only a pointer to the
data inside the buffer. This data must be copied to
another location otherwise you risk it being written
over in the buffer.
ring_buffer_lock: A way to lock the entire buffer.
ring_buffer_unlock: unlock the buffer.
ring_buffer_alloc: create a new ring buffer. Can choose between
overwrite or consumer/producer mode. Overwrite will
overwrite old data, where as consumer producer will
throw away new data if the consumer catches up with the
producer. The consumer/producer is the default.
ring_buffer_free: free the ring buffer.
ring_buffer_resize: resize the buffer. Changes the size of each cpu
buffer. Note, it is up to the caller to provide that
the buffer is not being used while this is happening.
This requirement may go away but do not count on it.
ring_buffer_lock_reserve: locks the ring buffer and allocates an
entry on the buffer to write to.
ring_buffer_unlock_commit: unlocks the ring buffer and commits it to
the buffer.
ring_buffer_write: writes some data into the ring buffer.
ring_buffer_peek: Look at a next item in the cpu buffer.
ring_buffer_consume: get the next item in the cpu buffer and
consume it. That is, this function increments the head
pointer.
ring_buffer_read_start: Start an iterator of a cpu buffer.
For now, this disables the cpu buffer, until you issue
a finish. This is just because we do not want the iterator
to be overwritten. This restriction may change in the future.
But note, this is used for static reading of a buffer which
is usually done "after" a trace. Live readings would want
to use the ring_buffer_consume above, which will not
disable the ring buffer.
ring_buffer_read_finish: Finishes the read iterator and reenables
the ring buffer.
ring_buffer_iter_peek: Look at the next item in the cpu iterator.
ring_buffer_read: Read the iterator and increment it.
ring_buffer_iter_reset: Reset the iterator to point to the beginning
of the cpu buffer.
ring_buffer_iter_empty: Returns true if the iterator is at the end
of the cpu buffer.
ring_buffer_size: returns the size in bytes of each cpu buffer.
Note, the real size is this times the number of CPUs.
ring_buffer_reset_cpu: Sets the cpu buffer to empty
ring_buffer_reset: sets all cpu buffers to empty
ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a
cpu buffer of another buffer. This is handy when you
want to take a snap shot of a running trace on just one
cpu. Having a backup buffer, to swap with facilitates this.
Ftrace max latencies use this.
ring_buffer_empty: Returns true if the ring buffer is empty.
ring_buffer_empty_cpu: Returns true if the cpu buffer is empty.
ring_buffer_record_disable: disable all cpu buffers (read only)
ring_buffer_record_disable_cpu: disable a single cpu buffer (read only)
ring_buffer_record_enable: enable all cpu buffers.
ring_buffer_record_enabl_cpu: enable a single cpu buffer.
ring_buffer_entries: The number of entries in a ring buffer.
ring_buffer_overruns: The number of entries removed due to writing wrap.
ring_buffer_time_stamp: Get the time stamp used by the ring buffer
ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp
into nanosecs.
I still need to implement the GTOD feature. But we need support from
the cpu frequency infrastructure. But this can be done at a later
time without affecting the ring buffer interface.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
