This patch adds support for RZ/G1C (r8a77470) SoC. RZ/G1C SoC has a
PLL register shared between hsusb0 and hsusb1. Compared to other RZ/G1
and R-Car Gen2/3, USB Host needs to deassert the pll reset.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-and-Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Document RZ/G1C (R8A77470) SoC bindings.
For RZ/G1C, this driver is used to enable interrupt generation and
initializing timing registers which is part of phy_init code.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Add USB PHY support for r8a77470 SoC. Renesas RZ/G1C (R8A77470)
USB PHY is similar to the R-Car Gen2 family, but has the below
feature compared to other RZ/G1 and R-Car Gen2/3 SoCs
It has a shared pll reset for usbphy0/usbphy1 and this register
reside in usbphy0 block.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
TRM [1] mentions that we need to power up
PCIESS_PHY_TX and PCIESS_PHY_RX before configuring
PCIe_PHY_RX SCP settings.
See "Table 26-81. PCIePHY Subsystem Low-Level Programming Sequence".
[1] DRA75x, DRA74x TRM - http://www.ti.com/lit/ug/sprui30f/sprui30f.pdf
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
As per "Table 26-7. SATA PHY Subsystem Low-Level Programming Sequence"
in TRM [1] we need to turn on SATA_PHY_TX before SATA_PHY_RX.
[1] DRA75x, DRA74x TRM - http://www.ti.com/lit/ug/sprui30f/sprui30f.pdf
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
For increased DPLL stability use the settings recommended in
the TRM [1] for PHY_RX registers for SATA and USB.
For SATA we need to use spread spectrum settings even
though we don't have spread spectrum enabled. The
suggested non-spread spectrum settings don't work.
[1] DRA75x, DRA74x TRM - http://www.ti.com/lit/ug/sprui30f/sprui30f.pdf
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Introduce a mode property in the driver data so that
we don't have to keep using "of_device_is_compatible()"
throughtout the driver.
No functional change.
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
There seems to be a missing bit-wise or operator when setting val,
fix this by adding it in.
Fixes: 2796ceb0c1 ("phy: ti-pipe3: Update pcie phy settings")
Cc: stable@vger.kernel.org # v4.19+
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Add UFS M-PHY node document for MediaTek SoC chips.
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
This patch documents the new proprty drive-impedance-ohm for
Rockchip's eMMC PHY node.
Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com>
Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
The rockchip-emmc PHY can be configured with different
drive impedance values. Currenlty a value of 50 Ohm is
hard coded into the driver.
This patch introduces the DTS property 'drive-impedance-ohm'
for the rockchip-emmc phy node, which uses the value from the DTS
to setup the drive impedance accordingly.
Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com>
Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
The phy code was using implicit sequencing between the PHY driver
and the UFS driver to implement certain hardware requirements.
Specifically, the PHY reset register in the UFS controller needs
to be deasserted before serdes start occurs in the PHY.
Before this change, the code was doing this by utilizing the two
phy callbacks, phy_init() and phy_poweron(), as "init step 1" and
"init step 2", where the UFS driver would deassert reset between
these two steps.
This makes it challenging to power off the regulators in suspend,
as regulators are initialized in init, not in poweron(), but only
poweroff() is called during suspend, not exit().
For UFS, move the actual firing up of the PHY to phy_poweron() and
phy_poweroff() callbacks, rather than init()/exit(). UFS calls
phy_poweroff() during suspend, so now all clocks and regulators for
the phy can be powered down during suspend.
QMP is a little tricky because the PHY is also shared with PCIe and
USB3, which have their own definitions for init() and poweron(). Rename
the meaty functions to _enable() and _disable() to disentangle from the
PHY core names, and then create two different ops structures: one for
UFS and one for the other PHY types.
In phy-qcom-ufs, remove the 'is_powered_on' and 'is_started' guards,
as the generic PHY code does the reference counting. The
14/20nm-specific init functions get collapsed into the generic power_on()
function, with the addition of a calibrate() callback specific to 14/20nm.
Signed-off-by: Evan Green <evgreen@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Move the PHY reset from ufs-qcom into the respective PHYs. This will
allow us to merge the two phases of UFS PHY initialization.
Signed-off-by: Evan Green <evgreen@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Expose a reset controller that the phy will later use to control its
own PHY reset in the UFS controller. This will enable the combining
of PHY init functionality into a single function.
Signed-off-by: Evan Green <evgreen@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Add a resets property to the PHY that represents the PHY reset
register in the UFS controller itself. This better describes the
complete specification of the PHY, and allows the PHY to perform
its initialization in a single function, rather than relying on
back-channel sequencing of initialization through the PHY framework.
Signed-off-by: Evan Green <evgreen@chromium.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Add a required reset to the SDM845 UFS phy to express the PHY reset
bit inside the UFS controller register space. Before this change, this
reset was not expressed in the DT, and the driver utilized two different
callbacks (phy_init and phy_poweron) to implement a two-phase
initialization procedure that involved deasserting this reset between
init and poweron. This abused the two callbacks and diluted their
purpose.
That scheme does not work as regulators cannot be turned off in
phy_poweroff because they were turned on in init, rather than poweron.
The net result is that regulators are left on in suspend that shouldn't
be.
This new scheme gives the UFS reset to the PHY, so that it can fully
initialize itself in a single callback. We can then turn regulators on
during poweron and off during poweroff.
Signed-off-by: Evan Green <evgreen@chromium.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Enable Qualcomm UFS controllers to expose the PHY reset via a reset
controller.
Signed-off-by: Evan Green <evgreen@chromium.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
This adds support for the shared USB3 + PCIE PHY found in the
Amlogic G12A SoC Family.
It supports USB3 Host mode or PCIE 2.0 mode, depending on the layout of
the board.
Selection is done by the #phy-cells, making the mode static and exclusive.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
This adds support for the USB2 PHY found in the Amlogic G12A SoC Family.
It supports Host and/or Peripheral mode, depending on it's position.
The first PHY is only used as Host, but the second supports Dual modes
defined by the USB Control Glue HW in front of the USB Controllers.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Add the Amlogic G12A Family USB3 + PCIE Combo PHY Bindings.
This PHY can provide exclusively USB3 or PCIE support on shared I/Os.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Add the Amlogic G12A Family USB2 OTG PHY Bindings
The PHY can work in host or peripheral modes depending on it's position.
Configuration of the mode is part of the USBCTRL registers which are
outside of the PHY registers.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
USB PHY driver supports two types of stingray USB PHYs
- Type 1 is a combo PHY contains two PHYs, one SS and one HS.
- Type 2 is a single HS PHY.
These two PHY versons support both Generic xHCI host controller driver
and BDC Broadcom device controller driver.
Signed-off-by: Srinath Mannam <srinath.mannam@broadcom.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Add DT binding document for Stingray USB PHY.
Signed-off-by: Srinath Mannam <srinath.mannam@broadcom.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Add support for the XUSB pad controller found on Tegra186 SoCs. It is
mostly similar to the same IP found on earlier chips, but the number of
pads exposed differs, as do the programming sequences.
Note that the DVDD_PEX, DVDD_PEX_PLL, HVDD_PEX and HVDD_PEX_PLL power
supplies of the XUSB pad controller require strict power sequencing and
are therefore controlled by the PMIC on Tegra186.
Signed-off-by: JC Kuo <jckuo@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
[dan.carpenter@oracle.com: Fix testing the wrong variable in probe()]
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
[yuehaibing@huawei.com: Make two functions static to fix sparse warning]
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Support enabling various supplies needed to provide power to the PLLs
and logic used to drive the USB, PCI and SATA pads.
Reviewed-by: JC Kuo <jckuo@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
The device tree bindings document the "mode" property of "ports"
subnodes, but the driver was not parsing the property. In preparation
for adding role switching, parse the property at probe time.
Based on work by JC Kuo <jckuo@nvidia.com>.
Reviewed-by: JC Kuo <jckuo@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Tegra186 USB2 pads and USB3 pads do not have hardware mux for changing
the pad function. For such "lanes", we can skip the lane mux register
programming.
Signed-off-by: JC Kuo <jckuo@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Extend the bindings to cover the set of features found in Tegra186. Note
that, technically, there are four more supplies connected to the XUSB
pad controller (DVDD_PEX, DVDD_PEX_PLL, HVDD_PEX and HVDD_PEX_PLL), but
the power sequencing requirements of Tegra186 require these to be under
the control of the PMIC.
Reviewed-by: JC Kuo <jckuo@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Pull x86 asm updates from Thomas Gleixner:
"Two cleanup patches removing dead conditionals and unused code"
* 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/asm: Remove unused __constant_c_x_memset() macro and inlines
x86/asm: Remove dead __GNUC__ conditionals
Pull perf fixes from Thomas Gleixner:
"Three fixes for the fallout from the TSX errata workaround:
- Prevent memory corruption caused by a unchecked out of bound array
index.
- Two trivial fixes to address compiler warnings"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel: Make dev_attr_allow_tsx_force_abort static
perf/x86: Fixup typo in stub functions
perf/x86/intel: Fix memory corruption
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCXI36jAAKCRCAXGG7T9hj
vmL1AQC/kDMDp7qHr9hxf+xsEvkQWRU/DENwnoPBI9WtfiVjWQEAuXcZ5pd8H2Iw
d7yFo1c2h14jVnnRhDhQ2wAS1aPT0gY=
=fkTe
-----END PGP SIGNATURE-----
Merge tag 'for-linus-5.1b-rc1b-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fix from Juergen Gross:
"A fix for a Xen bug introduced by David's series for excluding
ballooned pages in vmcores"
* tag 'for-linus-5.1b-rc1b-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/balloon: Fix mapping PG_offline pages to user space
Two fixes (leak on invalid mount argument and possible deadlock on
i_size update on 32bit smp) and a fall-through warning cleanup
----------------------------------------------------------------
Gustavo A. R. Silva (1):
9p: mark expected switch fall-through
Hou Tao (1):
9p: use inode->i_lock to protect i_size_write() under 32-bit
zhengbin (1):
9p/net: fix memory leak in p9_client_create
fs/9p/v9fs_vfs.h | 23 +++++++++++++++++++++--
fs/9p/vfs_file.c | 6 +++++-
fs/9p/vfs_inode.c | 23 +++++++++++------------
fs/9p/vfs_inode_dotl.c | 27 ++++++++++++++-------------
fs/9p/vfs_super.c | 4 ++--
net/9p/client.c | 2 +-
net/9p/trans_xen.c | 2 +-
7 files changed, 55 insertions(+), 32 deletions(-)
-----BEGIN PGP SIGNATURE-----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=q3cR
-----END PGP SIGNATURE-----
Merge tag '9p-for-5.1' of git://github.com/martinetd/linux
Pull 9p updates from Dominique Martinet:
"Here is a 9p update for 5.1; there honestly hasn't been much.
Two fixes (leak on invalid mount argument and possible deadlock on
i_size update on 32bit smp) and a fall-through warning cleanup"
* tag '9p-for-5.1' of git://github.com/martinetd/linux:
9p/net: fix memory leak in p9_client_create
9p: use inode->i_lock to protect i_size_write() under 32-bit
9p: mark expected switch fall-through
When this .gitignore was added, lxdialog was an independent hostprogs-y.
Now that all objects in lxdialog/ are directly linked to mconf, the
lxdialog is no longer generated.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Currently, every arch/*/include/uapi/asm/Kbuild explicitly includes
the common Kbuild.asm file. Factor out the duplicated include directives
to scripts/Makefile.asm-generic so that no architecture would opt out
of the mandatory-y mechanism.
um is not forced to include mandatory-y since it is a very exceptional
case which does not support UAPI.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The generic-y is redundant under the following condition:
- arch has its own implementation
- the same header is added to generated-y
- the same header is added to mandatory-y
If a redundant generic-y is found, the warning like follows is displayed:
scripts/Makefile.asm-generic:20: redundant generic-y found in arch/arm/include/asm/Kbuild: timex.h
I fixed up arch Kbuild files found by this.
Suggested-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
During a simple no-op (nothing changed) build I saw 39 invocations of
the C compiler with the argument "-print-file-name=include". We don't
need to call the C compiler 39 times for this--one time will suffice.
Let's change NOSTDINC_FLAGS to a simply expanded variable to avoid
this since there doesn't appear to be any reason it should be
recursively expanded.
On my build this shaved ~400 ms off my "no-op" build.
Note that the recursive expansion seems to date back to the (really
old) commit e8f5bdb02c ("[PATCH] Makefile include path ordering").
It's a little unclear to me if the point of that patch was to switch
the variable to be recursively expanded (which it did) or to avoid
directly assigning to NOSTDINC_FLAGS (AKA to switch to +=) because
someone else (out of tree?) was setting it. I presume later since if
the only goal was to switch to recursive expansion the patch would
have just removed the ":".
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* The man page for dpkg-source(1) notes:
> -b, --build directory [format-specific-parameters]
> Build a source package (--build since dpkg 1.17.14).
> <...>
>
> dpkg-source will build the source package with the first
> format found in this ordered list: the format indicated
> with the --format command line option, the format
> indicated in debian/source/format, “1.0”. The fallback
> to “1.0” is deprecated and will be removed at some point
> in the future, you should always document the desired
> source format in debian/source/format. See section
> SOURCE PACKAGE FORMATS for an extensive description of
> the various source package formats.
Thus it would be more foolproof to explicitly use 1.0 (as we always
did) than to rely on dpkg-source's defaults.
* In a similar vein, debian/rules is not made executable by mkdebian,
and dpkg-source warns about that but still silently fixes the file.
Let's be explicit once again.
Signed-off-by: Arseny Maslennikov <ar@cs.msu.ru>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The of_find_device_by_node() takes a reference to the underlying device
structure, we should release that reference.
The implementation of this semantic code search is:
In a function, for a local variable returned by calling
of_find_device_by_node(),
a, if it is released by a function such as
put_device()/of_dev_put()/platform_device_put() after the last use,
it is considered that there is no reference leak;
b, if it is passed back to the caller via
dev_get_drvdata()/platform_get_drvdata()/get_device(), etc., the
reference will be released in other functions, and the current function
also considers that there is no reference leak;
c, for the rest of the situation, the current function should release the
reference by calling put_device, this code search will report the
corresponding error message.
By using this semantic code search, we have found some object reference leaks,
such as:
commit 11907e9d35 ("ASoC: fsl-asoc-card: fix object reference leaks in
fsl_asoc_card_probe")
commit a12085d139 ("mtd: rawnand: atmel: fix possible object reference leak")
commit 11493f2685 ("mtd: rawnand: jz4780: fix possible object reference leak")
There are still dozens of reference leaks in the current kernel code.
Further, for the case of b, the object returned to other functions may also
have a reference leak, we will continue to develop other cocci scripts to
further check the reference leak.
Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
Reviewed-by: Julia Lawall <Julia.Lawall@lip6.fr>
Reviewed-by: Markus Elfring <Markus.Elfring@web.de>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
-----BEGIN PGP SIGNATURE-----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=yOWp
-----END PGP SIGNATURE-----
Merge tag 'pidfd-v5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull pidfd system call from Christian Brauner:
"This introduces the ability to use file descriptors from /proc/<pid>/
as stable handles on struct pid. Even if a pid is recycled the handle
will not change. For a start these fds can be used to send signals to
the processes they refer to.
With the ability to use /proc/<pid> fds as stable handles on struct
pid we can fix a long-standing issue where after a process has exited
its pid can be reused by another process. If a caller sends a signal
to a reused pid it will end up signaling the wrong process.
With this patchset we enable a variety of use cases. One obvious
example is that we can now safely delegate an important part of
process management - sending signals - to processes other than the
parent of a given process by sending file descriptors around via scm
rights and not fearing that the given process will have been recycled
in the meantime. It also allows for easy testing whether a given
process is still alive or not by sending signal 0 to a pidfd which is
quite handy.
There has been some interest in this feature e.g. from systems
management (systemd, glibc) and container managers. I have requested
and gotten comments from glibc to make sure that this syscall is
suitable for their needs as well. In the future I expect it to take on
most other pid-based signal syscalls. But such features are left for
the future once they are needed.
This has been sitting in linux-next for quite a while and has not
caused any issues. It comes with selftests which verify basic
functionality and also test that a recycled pid cannot be signaled via
a pidfd.
Jon has written about a prior version of this patchset. It should
cover the basic functionality since not a lot has changed since then:
https://lwn.net/Articles/773459/
The commit message for the syscall itself is extensively documenting
the syscall, including it's functionality and extensibility"
* tag 'pidfd-v5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
selftests: add tests for pidfd_send_signal()
signal: add pidfd_send_signal() syscall
* Replace the /sys/class/dax device model with /sys/bus/dax, and include
a compat driver so distributions can opt-in to the new ABI.
* Allow for an alternative driver for the device-dax address-range
* Introduce the 'kmem' driver to hotplug / assign a device-dax
address-range to the core-mm.
* Arrange for the device-dax target-node to be onlined so that the newly
added memory range can be uniquely referenced by numa apis.
-----BEGIN PGP SIGNATURE-----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=hfa3
-----END PGP SIGNATURE-----
Merge tag 'devdax-for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull device-dax updates from Dan Williams:
"New device-dax infrastructure to allow persistent memory and other
"reserved" / performance differentiated memories, to be assigned to
the core-mm as "System RAM".
Some users want to use persistent memory as additional volatile
memory. They are willing to cope with potential performance
differences, for example between DRAM and 3D Xpoint, and want to use
typical Linux memory management apis rather than a userspace memory
allocator layered over an mmap() of a dax file. The administration
model is to decide how much Persistent Memory (pmem) to use as System
RAM, create a device-dax-mode namespace of that size, and then assign
it to the core-mm. The rationale for device-dax is that it is a
generic memory-mapping driver that can be layered over any "special
purpose" memory, not just pmem. On subsequent boots udev rules can be
used to restore the memory assignment.
One implication of using pmem as RAM is that mlock() no longer keeps
data off persistent media. For this reason it is recommended to enable
NVDIMM Security (previously merged for 5.0) to encrypt pmem contents
at rest. We considered making this recommendation an actively enforced
requirement, but in the end decided to leave it as a distribution /
administrator policy to allow for emulation and test environments that
lack security capable NVDIMMs.
Summary:
- Replace the /sys/class/dax device model with /sys/bus/dax, and
include a compat driver so distributions can opt-in to the new ABI.
- Allow for an alternative driver for the device-dax address-range
- Introduce the 'kmem' driver to hotplug / assign a device-dax
address-range to the core-mm.
- Arrange for the device-dax target-node to be onlined so that the
newly added memory range can be uniquely referenced by numa apis"
NOTE! I'm not entirely happy with the whole "PMEM as RAM" model because
we currently have special - and very annoying rules in the kernel about
accessing PMEM only with the "MC safe" accessors, because machine checks
inside the regular repeat string copy functions can be fatal in some
(not described) circumstances.
And apparently the PMEM modules can cause that a lot more than regular
RAM. The argument is that this happens because PMEM doesn't necessarily
get scrubbed at boot like RAM does, but that is planned to be added for
the user space tooling.
Quoting Dan from another email:
"The exposure can be reduced in the volatile-RAM case by scanning for
and clearing errors before it is onlined as RAM. The userspace tooling
for that can be in place before v5.1-final. There's also runtime
notifications of errors via acpi_nfit_uc_error_notify() from
background scrubbers on the DIMM devices. With that mechanism the
kernel could proactively clear newly discovered poison in the volatile
case, but that would be additional development more suitable for v5.2.
I understand the concern, and the need to highlight this issue by
tapping the brakes on feature development, but I don't see PMEM as RAM
making the situation worse when the exposure is also there via DAX in
the PMEM case. Volatile-RAM is arguably a safer use case since it's
possible to repair pages where the persistent case needs active
application coordination"
* tag 'devdax-for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
device-dax: "Hotplug" persistent memory for use like normal RAM
mm/resource: Let walk_system_ram_range() search child resources
mm/memory-hotplug: Allow memory resources to be children
mm/resource: Move HMM pr_debug() deeper into resource code
mm/resource: Return real error codes from walk failures
device-dax: Add a 'modalias' attribute to DAX 'bus' devices
device-dax: Add a 'target_node' attribute
device-dax: Auto-bind device after successful new_id
acpi/nfit, device-dax: Identify differentiated memory with a unique numa-node
device-dax: Add /sys/class/dax backwards compatibility
device-dax: Add support for a dax override driver
device-dax: Move resource pinning+mapping into the common driver
device-dax: Introduce bus + driver model
device-dax: Start defining a dax bus model
device-dax: Remove multi-resource infrastructure
device-dax: Kill dax_region base
device-dax: Kill dax_region ida
This is the final round of mostly small fixes and performance
improvements to our initial submit. The main regression fix is the
ia64 simscsi build failure which was missed in the serial number
elimination conversion.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCXIxBayYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pisherpAP4rxLpX
bcUnQnEsvoxys/JyoK08Qfv1JebZo1B2MAZ62wD/VZ7LpOuzVLhsM2KhLFGRrs1/
7D2K4tgtO2dQsFix7H0=
=pcHl
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull more SCSI updates from James Bottomley:
"This is the final round of mostly small fixes and performance
improvements to our initial submit.
The main regression fix is the ia64 simscsi build failure which was
missed in the serial number elimination conversion"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (24 commits)
scsi: ia64: simscsi: use request tag instead of serial_number
scsi: aacraid: Fix performance issue on logical drives
scsi: lpfc: Fix error codes in lpfc_sli4_pci_mem_setup()
scsi: libiscsi: Hold back_lock when calling iscsi_complete_task
scsi: hisi_sas: Change SERDES_CFG init value to increase reliability of HiLink
scsi: hisi_sas: Send HARD RESET to clear the previous affiliation of STP target port
scsi: hisi_sas: Set PHY linkrate when disconnected
scsi: hisi_sas: print PHY RX errors count for later revision of v3 hw
scsi: hisi_sas: Fix a timeout race of driver internal and SMP IO
scsi: hisi_sas: Change return variable type in phy_up_v3_hw()
scsi: qla2xxx: check for kstrtol() failure
scsi: lpfc: fix 32-bit format string warning
scsi: lpfc: fix unused variable warning
scsi: target: tcmu: Switch to bitmap_zalloc()
scsi: libiscsi: fall back to sendmsg for slab pages
scsi: qla2xxx: avoid printf format warning
scsi: lpfc: resolve static checker warning in lpfc_sli4_hba_unset
scsi: lpfc: Correct __lpfc_sli_issue_iocb_s4 lockdep check
scsi: ufs: hisi: fix ufs_hba_variant_ops passing
scsi: qla2xxx: Fix panic in qla_dfs_tgt_counters_show
...
-----BEGIN PGP SIGNATURE-----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=qBae
-----END PGP SIGNATURE-----
Merge tag 'for-5.1/block-post-20190315' of git://git.kernel.dk/linux-block
Pull more block layer changes from Jens Axboe:
"This is a collection of both stragglers, and fixes that came in after
I finalized the initial pull. This contains:
- An MD pull request from Song, with a few minor fixes
- Set of NVMe patches via Christoph
- Pull request from Konrad, with a few fixes for xen/blkback
- pblk fix IO calculation fix (Javier)
- Segment calculation fix for pass-through (Ming)
- Fallthrough annotation for blkcg (Mathieu)"
* tag 'for-5.1/block-post-20190315' of git://git.kernel.dk/linux-block: (25 commits)
blkcg: annotate implicit fall through
nvme-tcp: support C2HData with SUCCESS flag
nvmet: ignore EOPNOTSUPP for discard
nvme: add proper write zeroes setup for the multipath device
nvme: add proper discard setup for the multipath device
nvme: remove nvme_ns_config_oncs
nvme: disable Write Zeroes for qemu controllers
nvmet-fc: bring Disconnect into compliance with FC-NVME spec
nvmet-fc: fix issues with targetport assoc_list list walking
nvme-fc: reject reconnect if io queue count is reduced to zero
nvme-fc: fix numa_node when dev is null
nvme-fc: use nr_phys_segments to determine existence of sgl
nvme-loop: init nvmet_ctrl fatal_err_work when allocate
nvme: update comment to make the code easier to read
nvme: put ns_head ref if namespace fails allocation
nvme-trace: fix cdw10 buffer overrun
nvme: don't warn on block content change effects
nvme: add get-feature to admin cmds tracer
md: Fix failed allocation of md_register_thread
It's wrong to add len to sector_nr in raid10 reshape twice
...
Highlights include:
Bugfixes:
- Fix an Oops in SUNRPC back channel tracepoints
- Fix a SUNRPC client regression when handling oversized replies
- Fix the minimal size for SUNRPC reply buffer allocation
- rpc_decode_header() must always return a non-zero value on error
- Fix a typo in pnfs_update_layout()
Cleanups:
- Remove redundant check for the reply length in call_decode()
-----BEGIN PGP SIGNATURE-----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=cNDi
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-5.1-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client bugfixes from Trond Myklebust:
"Highlights include:
Bugfixes:
- Fix an Oops in SUNRPC back channel tracepoints
- Fix a SUNRPC client regression when handling oversized replies
- Fix the minimal size for SUNRPC reply buffer allocation
- rpc_decode_header() must always return a non-zero value on error
- Fix a typo in pnfs_update_layout()
Cleanup:
- Remove redundant check for the reply length in call_decode()"
* tag 'nfs-for-5.1-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
SUNRPC: Remove redundant check for the reply length in call_decode()
SUNRPC: Handle the SYSTEM_ERR rpc error
SUNRPC: rpc_decode_header() must always return a non-zero value on error
SUNRPC: Use the ENOTCONN error on socket disconnect
SUNRPC: Fix the minimal size for reply buffer allocation
SUNRPC: Fix a client regression when handling oversized replies
pNFS: Fix a typo in pnfs_update_layout
fix null pointer deref in tracepoints in back channel
One fix to prevent runtime allocation of 16GB pages when running in a VM (as
opposed to bare metal), because it doesn't work.
A small fix to our recently added KCOV support to exempt some more code from
being instrumented.
Plus a few minor build fixes, a small dead code removal and a defconfig update.
Thanks to:
Alexey Kardashevskiy, Aneesh Kumar K.V, Christophe Leroy, Jason Yan, Joel
Stanley, Mahesh Salgaonkar, Mathieu Malaterre.
-----BEGIN PGP SIGNATURE-----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=6cp4
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"One fix to prevent runtime allocation of 16GB pages when running in a
VM (as opposed to bare metal), because it doesn't work.
A small fix to our recently added KCOV support to exempt some more
code from being instrumented.
Plus a few minor build fixes, a small dead code removal and a
defconfig update.
Thanks to: Alexey Kardashevskiy, Aneesh Kumar K.V, Christophe Leroy,
Jason Yan, Joel Stanley, Mahesh Salgaonkar, Mathieu Malaterre"
* tag 'powerpc-5.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/64s: Include <asm/nmi.h> header file to fix a warning
powerpc/powernv: Fix compile without CONFIG_TRACEPOINTS
powerpc/mm: Disable kcov for SLB routines
powerpc: remove dead code in head_fsl_booke.S
powerpc/configs: Sync skiroot defconfig
powerpc/hugetlb: Don't do runtime allocation of 16G pages in LPAR configuration
Pull vfs mount infrastructure fix from Al Viro:
"Fixup for sysfs braino.
Capabilities checks for sysfs mount do include those on netns, but
only if CONFIG_NET_NS is enabled. Sorry, should've caught that
earlier..."
* 'work.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fix sysfs_init_fs_context() in !CONFIG_NET_NS case
