The 'early' argument of irq_domain_activate_irq() is actually used to
denote reservation mode. To avoid confusion, rename it before abuse
happens.
No functional change.
Fixes: 7249164346 ("genirq/irqdomain: Update irq_domain_ops.activate() signature")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Alexandru Chirvasitu <achirvasub@gmail.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Dou Liyang <douly.fnst@cn.fujitsu.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Maciej W. Rozycki <macro@linux-mips.org>
Cc: Mikael Pettersson <mikpelinux@gmail.com>
Cc: Josh Poulson <jopoulso@microsoft.com>
Cc: Mihai Costache <v-micos@microsoft.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: linux-pci@vger.kernel.org
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Dexuan Cui <decui@microsoft.com>
Cc: Simon Xiao <sixiao@microsoft.com>
Cc: Saeed Mahameed <saeedm@mellanox.com>
Cc: Jork Loeser <Jork.Loeser@microsoft.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: devel@linuxdriverproject.org
Cc: KY Srinivasan <kys@microsoft.com>
Cc: Alan Cox <alan@linux.intel.com>
Cc: Sakari Ailus <sakari.ailus@intel.com>,
Cc: linux-media@vger.kernel.org
The intel-iommu DMA ops fail to correctly handle scatterlists where
sg->offset is greater than PAGE_SIZE - the IOVA allocation is computed
appropriately based on the page-aligned portion of the offset, but the
mapping is set up relative to sg->page, which means it fails to actually
cover the whole buffer (and in the worst case doesn't cover it at all):
(sg->dma_address + sg->dma_len) ----+
sg->dma_address ---------+ |
iov_pfn------+ | |
| | |
v v v
iova: a b c d e f
|--------|--------|--------|--------|--------|
<...calculated....>
[_____mapped______]
pfn: 0 1 2 3 4 5
|--------|--------|--------|--------|--------|
^ ^ ^
| | |
sg->page ----+ | |
sg->offset --------------+ |
(sg->offset + sg->length) ----------+
As a result, the caller ends up overrunning the mapping into whatever
lies beyond, which usually goes badly:
[ 429.645492] DMAR: DRHD: handling fault status reg 2
[ 429.650847] DMAR: [DMA Write] Request device [02:00.4] fault addr f2682000 ...
Whilst this is a fairly rare occurrence, it can happen from the result
of intermediate scatterlist processing such as scatterwalk_ffwd() in the
crypto layer. Whilst that particular site could be fixed up, it still
seems worthwhile to bring intel-iommu in line with other DMA API
implementations in handling this robustly.
To that end, fix the intel_map_sg() path to line up the mapping
correctly (in units of MM pages rather than VT-d pages to match the
aligned_nrpages() calculation) regardless of the offset, and use
sg_phys() consistently for clarity.
Reported-by: Harsh Jain <Harsh@chelsio.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Reviewed by: Ashok Raj <ashok.raj@intel.com>
Tested by: Jacob Pan <jacob.jun.pan@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
* Enforce MSI multiple IRQ alignment in AMD IOMMU
* VT-d PASID error handling fixes
* Add r8a7795 IPMMU support
* Manage runtime PM links on exynos at {add,remove}_device callbacks
* Fix Mediatek driver name to avoid conflict
* Add terminate support to qcom fault handler
* 64-bit IOVA optimizations
* Simplfy IOVA domain destruction, better use of rcache, and
skip anchor nodes on copy
* Convert to IOMMU TLB sync API in io-pgtable-arm{-v7s}
* Drop command queue lock when waiting for CMD_SYNC completion on
ARM SMMU implementations supporting MSI to cacheable memory
* iomu-vmsa cleanup inspired by missed IOTLB sync callbacks
* Fix sleeping lock with preemption disabled for RT
* Dual MMU support for TI DRA7xx DSPs
* Optional flush option on IOVA allocation avoiding overhead when
caller can try other options
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.14 (GNU/Linux)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=o4qF
-----END PGP SIGNATURE-----
Merge tag 'iommu-v4.15-rc1' of git://github.com/awilliam/linux-vfio
Pull IOMMU updates from Alex Williamson:
"As Joerg mentioned[1], he's out on paternity leave through the end of
the year and I'm filling in for him in the interim:
- Enforce MSI multiple IRQ alignment in AMD IOMMU
- VT-d PASID error handling fixes
- Add r8a7795 IPMMU support
- Manage runtime PM links on exynos at {add,remove}_device callbacks
- Fix Mediatek driver name to avoid conflict
- Add terminate support to qcom fault handler
- 64-bit IOVA optimizations
- Simplfy IOVA domain destruction, better use of rcache, and skip
anchor nodes on copy
- Convert to IOMMU TLB sync API in io-pgtable-arm{-v7s}
- Drop command queue lock when waiting for CMD_SYNC completion on ARM
SMMU implementations supporting MSI to cacheable memory
- iomu-vmsa cleanup inspired by missed IOTLB sync callbacks
- Fix sleeping lock with preemption disabled for RT
- Dual MMU support for TI DRA7xx DSPs
- Optional flush option on IOVA allocation avoiding overhead when
caller can try other options
[1] https://lkml.org/lkml/2017/10/22/72"
* tag 'iommu-v4.15-rc1' of git://github.com/awilliam/linux-vfio: (54 commits)
iommu/iova: Use raw_cpu_ptr() instead of get_cpu_ptr() for ->fq
iommu/mediatek: Fix driver name
iommu/ipmmu-vmsa: Hook up r8a7795 DT matching code
iommu/ipmmu-vmsa: Allow two bit SL0
iommu/ipmmu-vmsa: Make IMBUSCTR setup optional
iommu/ipmmu-vmsa: Write IMCTR twice
iommu/ipmmu-vmsa: IPMMU device is 40-bit bus master
iommu/ipmmu-vmsa: Make use of IOMMU_OF_DECLARE()
iommu/ipmmu-vmsa: Enable multi context support
iommu/ipmmu-vmsa: Add optional root device feature
iommu/ipmmu-vmsa: Introduce features, break out alias
iommu/ipmmu-vmsa: Unify ipmmu_ops
iommu/ipmmu-vmsa: Clean up struct ipmmu_vmsa_iommu_priv
iommu/ipmmu-vmsa: Simplify group allocation
iommu/ipmmu-vmsa: Unify domain alloc/free
iommu/ipmmu-vmsa: Fix return value check in ipmmu_find_group_dma()
iommu/vt-d: Clear pasid table entry when memory unbound
iommu/vt-d: Clear Page Request Overflow fault bit
iommu/vt-d: Missing checks for pasid tables if allocation fails
iommu/amd: Limit the IOVA page range to the specified addresses
...
get_cpu_ptr() disabled preemption and returns the ->fq object of the
current CPU. raw_cpu_ptr() does the same except that it not disable
preemption which means the scheduler can move it to another CPU after it
obtained the per-CPU object.
In this case this is not bad because the data structure itself is
protected with a spin_lock. This change shouldn't matter however on RT
it does because the sleeping lock can't be accessed with disabled
preemption.
Cc: Joerg Roedel <joro@8bytes.org>
Cc: iommu@lists.linux-foundation.org
Reported-by: vinadhy@gmail.com
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
There exist two Mediatek iommu drivers for the two different
generations of the device. But both drivers have the same name
"mtk-iommu". This breaks the registration of the second driver:
Error: Driver 'mtk-iommu' is already registered, aborting...
Fix this by changing the name for first generation to
"mtk-iommu-v1".
Fixes: b17336c55d ("iommu/mediatek: add support for mtk iommu generation one HW")
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Tie in r8a7795 features and update the IOMMU_OF_DECLARE
compat string to include the updated compat string.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Introduce support for two bit SL0 bitfield in IMTTBCR
by using a separate feature flag.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Introduce a feature to allow opt-out of setting up
IMBUSCR. The default case is unchanged.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Write IMCTR both in the root device and the leaf node.
To allow access of IMCTR introduce the following function:
- ipmmu_ctx_write_all()
While at it also rename context functions:
- ipmmu_ctx_read() -> ipmmu_ctx_read_root()
- ipmmu_ctx_write() -> ipmmu_ctx_write_root()
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The r8a7795 IPMMU supports 40-bit bus mastering. Both
the coherent DMA mask and the streaming DMA mask are
set to unlock the 40-bit address space for coherent
allocations and streaming operations.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Hook up IOMMU_OF_DECLARE() support in case CONFIG_IOMMU_DMA
is enabled. The only current supported case for 32-bit ARM
is disabled, however for 64-bit ARM usage of OF is required.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Add support for up to 8 contexts. Each context is mapped to one
domain. One domain is assigned one or more slave devices. Contexts
are allocated dynamically and slave devices are grouped together
based on which IPMMU device they are connected to. This makes slave
devices tied to the same IPMMU device share the same IOVA space.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Add root device handling to the IPMMU driver by allowing certain
DT compat strings to enable has_cache_leaf_nodes that in turn will
support both root devices with interrupts and leaf devices that
face the actual IPMMU consumer devices.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Introduce struct ipmmu_features to track various hardware
and software implementation changes inside the driver for
different kinds of IPMMU hardware. Add use_ns_alias_offset
as a first example of a feature to control if the secure
register bank offset should be used or not.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The remaining difference between the ARM-specific and iommu-dma ops is
in the {add,remove}_device implementations, but even those have some
overlap and duplication. By stubbing out the few arm_iommu_*() calls,
we can get rid of the rest of the inline #ifdeffery to both simplify the
code and improve build coverage.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Now that the IPMMU instance pointer is the only thing remaining in the
private data structure, we no longer need the extra level of indirection
and can simply stash that directlty in the fwspec.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
We go through quite the merry dance in order to find masters behind the
same IPMMU instance, so that we can ensure they are grouped together.
None of which is really necessary, since the master's private data
already points to the particular IPMMU it is associated with, and that
IPMMU instance data is the perfect place to keep track of a per-instance
group directly.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
We have two implementations for ipmmu_ops->alloc depending on
CONFIG_IOMMU_DMA, the difference being whether they accept the
IOMMU_DOMAIN_DMA type or not. However, iommu_dma_get_cookie() is
guaranteed to return an error when !CONFIG_IOMMU_DMA, so if
ipmmu_domain_alloc_dma() was actually checking and handling the return
value correctly, it would behave the same as ipmmu_domain_alloc()
anyway.
Similarly for freeing; iommu_put_dma_cookie() is robust by design.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
In case of error, the function iommu_group_get() returns NULL pointer
not ERR_PTR(). The IS_ERR() test in the return value check should be
replaced with NULL test.
Fixes: 3ae4729202 ("iommu/ipmmu-vmsa: Add new IOMMU_DOMAIN_DMA ops")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
In intel_svm_unbind_mm(), pasid table entry must be cleared during
svm free. Otherwise, hardware may be set up with a wild pointer.
Suggested-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Currently Page Request Overflow bit in IOMMU Fault Status register
is not cleared. Not clearing this bit would mean that any future
page-request is going to be automatically dropped by IOMMU.
Suggested-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
intel_svm_alloc_pasid_tables() might return an error but never be
checked by the callers. Later when intel_svm_bind_mm() is called,
there are no checks for valid pasid tables before enabling them.
Signed-off-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Liu, Yi L <yi.l.liu@intel.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The extent of pages specified when applying a reserved region should
include up to the last page of the range, but not the page following
the range.
Signed-off-by: Gary R Hook <gary.hook@amd.com>
Fixes: 8d54d6c8b8 ('iommu/amd: Implement apply_dm_region call-back')
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This is quite useful for debugging. Currently, always TERMINATE the
translation when the fault handler returns (since this is all we need
for debugging drivers). But I expect the SVM work should eventually
let us do something more clever.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Variable flush_addr is being assigned but is never read; it
is redundant and can be removed. Cleans up the clang warning:
drivers/iommu/amd_iommu.c:2388:2: warning: Value stored to 'flush_addr'
is never read
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
On an is_allocated() interrupt index, we ALIGN() the current index and
then increment it via the for loop, guaranteeing that it is no longer
aligned for alignments >1. We instead need to align the next index,
to guarantee forward progress, moving the increment-only to the case
where the index was found to be unallocated.
Fixes: 37946d95fc ('iommu/amd: Add align parameter to alloc_irq_index()')
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
While CMD_SYNC is unlikely to complete immediately such that we never go
round the polling loop, with a lightly-loaded queue it may still do so
long before the delay period is up. If we have no better completion
notifier, use similar logic as we have for SMMUv2 to spin a number of
times before each backoff, so that we have more chance of catching syncs
which complete relatively quickly and avoid delaying unnecessarily.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
We have separate (identical) timeout values for polling for a queue to
drain and waiting for an MSI to signal CMD_SYNC completion. In reality,
we only wait for the command queue to drain if we're waiting on a sync,
so just merged these two timeouts into a single constant.
Signed-off-by: Will Deacon <will.deacon@arm.com>
arm_smmu_cmdq_issue_sync is a little unwieldy now that it supports both
MSI and event-based polling, so split it into two functions to make things
easier to follow.
Signed-off-by: Will Deacon <will.deacon@arm.com>
As an IRQ, the CMD_SYNC interrupt is not particularly useful, not least
because we often need to wait for sync completion within someone else's
IRQ handler anyway. However, when the SMMU is both coherent and supports
MSIs, we can have a lot more fun by not using it as an interrupt at all.
Following the example suggested in the architecture and using a write
targeting normal memory, we can let callers wait on a status variable
outside the lock instead of having to stall the entire queue or even
touch MMIO registers. Since multiple sync commands are guaranteed to
complete in order, a simple incrementing sequence count is all we need
to unambiguously support any realistic number of overlapping waiters.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
The cmdq-sync interrupt is never going to be particularly useful, since
for stage 1 DMA at least we'll often need to wait for sync completion
within someone else's IRQ handler, thus have to implement polling
anyway. Beyond that, the overhead of taking an interrupt, then still
having to grovel around in the queue to figure out *which* sync command
completed, doesn't seem much more attractive than simple polling either.
Furthermore, if an implementation both has wired interrupts and supports
MSIs, then we don't want to be taking the IRQ unnecessarily if we're
using the MSI write to update memory. Let's just make life simpler by
not even bothering to claim it in the first place.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
CMD_SYNC already has a bit of special treatment here and there, but as
we're about to extend it with more functionality for completing outside
the CMDQ lock, things are going to get rather messy if we keep trying to
cram everything into a single generic command interface. Instead, let's
break out the issuing of CMD_SYNC into its own specific helper where
upcoming changes will have room to breathe.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Slightly confusingly, when reporting a mismatch of the ID register
value, we still refer to the IORT COHACC override flag as the
"dma-coherent property" if we booted with ACPI. Update the message
to be firmware-agnostic in line with SMMUv2.
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reported-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
According to Spec, it is ILLEGAL to set STE.S1STALLD if STALL_MODEL
is not 0b00, which means we should not disable stall mode if stall
or terminate mode is not configuable.
Meanwhile, it is also ILLEGAL when STALL_MODEL==0b10 && CD.S==0 which
means if stall mode is force we should always set CD.S.
As Jean-Philippe's suggestion, this patch introduce a feature bit
ARM_SMMU_FEAT_STALL_FORCE, which means smmu only supports stall force.
Therefore, we can avoid the ILLEGAL setting of STE.S1STALLD.by checking
ARM_SMMU_FEAT_STALL_FORCE.
This patch keeps the ARM_SMMU_FEAT_STALLS as the meaning of stall supported
(force or configuable) to easy to expand the future function, i.e. we can
only use ARM_SMMU_FEAT_STALLS to check whether we should register fault
handle or enable master can_stall, etc to supporte platform SVM.
The feature bit, STE.S1STALLD and CD.S setting will be like:
STALL_MODEL FEATURE S1STALLD CD.S
0b00 ARM_SMMU_FEAT_STALLS 0b1 0b0
0b01 !ARM_SMMU_FEAT_STALLS && !ARM_SMMU_FEAT_STALL_FORCE 0b0 0b0
0b10 ARM_SMMU_FEAT_STALLS && ARM_SMMU_FEAT_STALL_FORCE 0b0 0b1
after apply this patch.
Signed-off-by: Yisheng Xie <xieyisheng1@huawei.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
The ARM SMMU identity mapping performance was poor compared with the
DMA mode. It was found that enable caching would restore the performance
back to normal. The S2CRB_TLBEN bit in the ACR register would allow for
caching of the stream to context register bypass transaction information.
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Feng Kan <fkan@apm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
The SMMUv3 architecture permits caching of data structures deemed to be
"reachable" by the SMU, which includes STEs marked as invalid. When
transitioning an STE to a bypass/fault configuration at init or detach
time, we mistakenly elide the CMDQ_OP_CFGI_STE operation in some cases,
therefore potentially leaving the old STE state cached in the SMMU.
This patch fixes the problem by ensuring that we perform the
CMDQ_OP_CFGI_STE operation irrespective of the validity of the previous
STE.
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reported-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Now that the kernel headers have synced with the relevant upstream
ACPICA updates, it's time to clean up the temporary local definitions.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
The function only sends the flush command to the IOMMU(s),
but does not wait for its completion when it returns. Fix
that.
Fixes: 601367d76b ('x86/amd-iommu: Remove iommu_flush_domain function')
Cc: stable@vger.kernel.org # >= 2.6.33
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Since IOVA allocation failure is not unusual case we need to flush
CPUs' rcache in hope we will succeed in next round.
However, it is useful to decide whether we need rcache flush step because
of two reasons:
- Not scalability. On large system with ~100 CPUs iterating and flushing
rcache for each CPU becomes serious bottleneck so we may want to defer it.
- free_cpu_cached_iovas() does not care about max PFN we are interested in.
Thus we may flush our rcaches and still get no new IOVA like in the
commonly used scenario:
if (dma_limit > DMA_BIT_MASK(32) && dev_is_pci(dev))
iova = alloc_iova_fast(iovad, iova_len, DMA_BIT_MASK(32) >> shift);
if (!iova)
iova = alloc_iova_fast(iovad, iova_len, dma_limit >> shift);
1. First alloc_iova_fast() call is limited to DMA_BIT_MASK(32) to get
PCI devices a SAC address
2. alloc_iova() fails due to full 32-bit space
3. rcaches contain PFNs out of 32-bit space so free_cpu_cached_iovas()
throws entries away for nothing and alloc_iova() fails again
4. Next alloc_iova_fast() call cannot take advantage of rcache since we
have just defeated caches. In this case we pick the slowest option
to proceed.
This patch reworks flushed_rcache local flag to be additional function
argument instead and control rcache flush step. Also, it updates all users
to do the flush as the last chance.
Signed-off-by: Tomasz Nowicki <Tomasz.Nowicki@caviumnetworks.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Tested-by: Nate Watterson <nwatters@codeaurora.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Exynos SYSMMU registers standard platform device with sysmmu_of_match
table, what means that this table is accessed every time a new platform
device is registered in a system. This might happen also after the boot,
so the table must not be attributed as initconst to avoid potential kernel
oops caused by access to freed memory.
Fixes: 6b21a5db36 ("iommu/exynos: Support for device tree")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
When SME memory encryption is active it will rely on SWIOTLB to handle
DMA for devices that cannot support the addressing requirements of
having the encryption mask set in the physical address. The IOMMU
currently disables SWIOTLB if it is not running in passthrough mode.
This is not desired as non-PCI devices attempting DMA may fail. Update
the code to check if SME is active and not disable SWIOTLB.
Fixes: 2543a786aa ("iommu/amd: Allow the AMD IOMMU to work with memory encryption")
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Make use of the new alignment capability of
alloc_irq_index() to enforce IRQ index alignment
for MSI.
Reported-by: Thomas Gleixner <tglx@linutronix.de>
Fixes: 2b32450634 ('iommu/amd: Add routines to manage irq remapping tables')
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
For multi-MSI IRQ ranges the IRQ index needs to be aligned
to the power-of-two of the requested IRQ count. Extend the
alloc_irq_index() function to allow such an allocation.
Reported-by: Thomas Gleixner <tglx@linutronix.de>
Fixes: 2b32450634 ('iommu/amd: Add routines to manage irq remapping tables')
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
