Lose dummy ->write hook in case of SLUB, it's possible now.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Use WARN() rather than a printk() + backtrace();
this gives a more standard format message as well as complete
information (including line numbers etc) that will be collected
by kerneloops.org
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Commit 4752c36978 aka
"maps4: simplify interdependence of maps and smaps" broke /proc/pid/smaps,
causing it to display some vmas twice and other vmas not at all. For example:
grep .- /proc/1/smaps >/tmp/smaps; diff /proc/1/maps /tmp/smaps
1 25d24
2 < 7fd7e23aa000-7fd7e23ac000 rw-p 7fd7e23aa000 00:00 0
3 28a28
4 > ffffffffff600000-ffffffffff601000 r-xp 00000000 00:00 0 [vsyscall]
The bug has something to do with setting m->version before all the
seq_printf's have been performed. show_map was doing this correctly,
but show_smap was doing this in the middle of its seq_printf sequence.
This patch arranges things so that the setting of m->version in show_smap
is also done at the end of its seq_printf sequence.
Testing: in addition to the above grep test, for each process I summed
up the 'Rss' fields of /proc/pid/smaps and compared that to the 'VmRSS'
field of /proc/pid/status. All matched except for Xorg (which has a
/dev/mem mapping which Rss accounts for but VmRSS does not). This result
gives us some confidence that neither /proc/pid/maps nor /proc/pid/smaps
are any longer skipping or double-counting vmas.
Signed-off-by: Joe Korty <joe.korty@ccur.com>
Cc: Matt Mackall <mpm@selenic.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Commit f06febc96b ("timers: fix itimer/
many thread hang") introduced a new task_cputime interface and
subsequently only converted binfmt_elf over to it. This results in the
build for binfmt_elf_fdpic blowing up given that p->signal->{u,s}time
have disappeared from underneath us.
Apply the same trivial fix from binfmt_elf to binfmt_elf_fdpic.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This merges branches irq/genirq, irq/sparseirq-v4, timers/hpet-percpu
and x86/uv.
The sparseirq branch is just preliminary groundwork: no sparse IRQs are
actually implemented by this tree anymore - just the new APIs are added
while keeping the old way intact as well (the new APIs map 1:1 to
irq_desc[]). The 'real' sparse IRQ support will then be a relatively
small patch ontop of this - with a v2.6.29 merge target.
* 'genirq-v28-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (178 commits)
genirq: improve include files
intr_remapping: fix typo
io_apic: make irq_mis_count available on 64-bit too
genirq: fix name space collisions of nr_irqs in arch/*
genirq: fix name space collision of nr_irqs in autoprobe.c
genirq: use iterators for irq_desc loops
proc: fixup irq iterator
genirq: add reverse iterator for irq_desc
x86: move ack_bad_irq() to irq.c
x86: unify show_interrupts() and proc helpers
x86: cleanup show_interrupts
genirq: cleanup the sparseirq modifications
genirq: remove artifacts from sparseirq removal
genirq: revert dynarray
genirq: remove irq_to_desc_alloc
genirq: remove sparse irq code
genirq: use inline function for irq_to_desc
genirq: consolidate nr_irqs and for_each_irq_desc()
x86: remove sparse irq from Kconfig
genirq: define nr_irqs for architectures with GENERIC_HARDIRQS=n
...
* 'v28-timers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (36 commits)
fix documentation of sysrq-q really
Fix documentation of sysrq-q
timer_list: add base address to clock base
timer_list: print cpu number of clockevents device
timer_list: print real timer address
NOHZ: restart tick device from irq_enter()
NOHZ: split tick_nohz_restart_sched_tick()
NOHZ: unify the nohz function calls in irq_enter()
timers: fix itimer/many thread hang, fix
timers: fix itimer/many thread hang, v3
ntp: improve adjtimex frequency rounding
timekeeping: fix rounding problem during clock update
ntp: let update_persistent_clock() sleep
hrtimer: reorder struct hrtimer to save 8 bytes on 64bit builds
posix-timers: lock_timer: make it readable
posix-timers: lock_timer: kill the bogus ->it_id check
posix-timers: kill ->it_sigev_signo and ->it_sigev_value
posix-timers: sys_timer_create: cleanup the error handling
posix-timers: move the initialization of timer->sigq from send to create path
posix-timers: sys_timer_create: simplify and s/tasklist/rcu/
...
Fix trivial conflicts due to sysrq-q description clahes in
Documentation/sysrq.txt and drivers/char/sysrq.c
Use fs/*/Kconfig more, which is good because everything related to one
filesystem is in one place and fs/Kconfig is quite fat.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs: (26 commits)
9p: add more conservative locking
9p: fix oops in protocol stat parsing error path.
9p: fix device file handling
9p: Improve debug support
9p: eliminate depricated conv functions
9p: rework client code to use new protocol support functions
9p: remove unnecessary tag field from p9_req_t structure
9p: remove 9p fcall debug prints
9p: add new protocol support code
9p: encapsulate version function
9p: move dirread to fs layer
9p: adjust 9p vfs write operation
9p: move readn meta-function from client to fs layer
9p: consolidate read/write functions
9p: drop broken unused error path from p9_conn_create()
9p: make rpc code common and rework flush code
9p: use the rcall structure passed in the request in trans_fd read_work
9p: apply common request code to trans_fd
9p: apply common tagpool handling to trans_fd
9p: move request management to client code
...
* git://git.linux-nfs.org/projects/trondmy/nfs-2.6:
NFS: use correct fs type for v4 submounts and referrals
Make nfs_file_cred more robust.
NFS: Enable NFSv4 callback server to listen on AF_INET6 sockets
* 'linux-next' of git://git.infradead.org/ubifs-2.6: (25 commits)
UBIFS: fix ubifs_compress commentary
UBIFS: amend printk
UBIFS: do not read unnecessary bytes when unpacking bits
UBIFS: check buffer length when scanning for LPT nodes
UBIFS: correct condition to eliminate unecessary assignment
UBIFS: add more debugging messages for LPT
UBIFS: fix bulk-read handling uptodate pages
UBIFS: improve garbage collection
UBIFS: allow for sync_fs when read-only
UBIFS: commit on sync_fs
UBIFS: correct comment for commit_on_unmount
UBIFS: update dbg_dump_inode
UBIFS: fix commentary
UBIFS: fix races in bit-fields
UBIFS: ensure data read beyond i_size is zeroed out correctly
UBIFS: correct key comparison
UBIFS: use bit-fields when possible
UBIFS: check data CRC when in error state
UBIFS: improve znode splitting rules
UBIFS: add no_chk_data_crc mount option
...
* git://git.infradead.org/mtd-2.6: (69 commits)
Revert "[MTD] m25p80.c code cleanup"
[MTD] [NAND] GPIO driver depends on ARM... for now.
[MTD] [NAND] sh_flctl: fix compile error
[MTD] [NOR] AT49BV6416 has swapped erase regions
[MTD] [NAND] GPIO NAND flash driver
[MTD] cmdlineparts documentation change - explain where mtd-id comes from
[MTD] cfi_cmdset_0002.c: Add Macronix CFI V1.0 TopBottom detection
[MTD] [NAND] Fix compilation warnings in drivers/mtd/nand/cs553x_nand.c
[JFFS2] Write buffer offset adjustment for NOR-ECC (Sibley) flash
[MTD] mtdoops: Fix a bug where block may not be erased
[MTD] mtdoops: Add a magic number to logged kernel oops
[MTD] mtdoops: Fix an off by one error
[JFFS2] Correct parameter names of jffs2_compress() in comments
[MTD] [NAND] sh_flctl: add support for Renesas SuperH FLCTL
[MTD] [NAND] Bug on atmel_nand HW ECC : OOB info not correctly written
[MTD] [MAPS] Remove unused variable after ROM API cleanup.
[MTD] m25p80.c extended jedec support (v2)
[MTD] remove unused mtd parameter in of_mtd_parse_partitions()
[MTD] [NAND] remove dead Kconfig associated with !CONFIG_PPC_MERGE
[MTD] [NAND] driver extension to support NAND on TQM85xx modules
...
The usage of elfcorehdr_addr has changed recently such that being set to
ELFCORE_ADDR_MAX is used by is_kdump_kernel() to indicate if the code is
executing in a kernel executed as a crash kernel.
However, arch/ia64/kernel/setup.c:reserve_elfcorehdr will rest
elfcorehdr_addr to ELFCORE_ADDR_MAX on error, which means any subsequent
calls to is_kdump_kernel() will return 0, even though they should return
1.
Ok, at this point in time there are no subsequent calls, but I think its
fair to say that there is ample scope for error or at the very least
confusion.
This patch add an extra state, ELFCORE_ADDR_ERR, which indicates that
elfcorehdr_addr was passed on the command line, and thus execution is
taking place in a crashdump kernel, but vmcore can't be used for some
reason. This is tested for using is_vmcore_usable() and set using
vmcore_unusable(). A subsequent patch makes use of this new code.
To summarise, the states that elfcorehdr_addr can now be in are as follows:
ELFCORE_ADDR_MAX: not a crashdump kernel
ELFCORE_ADDR_ERR: crashdump kernel but vmcore is unusable
any other value: crash dump kernel and vmcore is usable
Signed-off-by: Simon Horman <horms@verge.net.au>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
o elfcorehdr_addr is used by not only the code under CONFIG_PROC_VMCORE
but also by the code which is not inside CONFIG_PROC_VMCORE. For
example, is_kdump_kernel() is used by powerpc code to determine if
kernel is booting after a panic then use previous kernel's TCE table.
So even if CONFIG_PROC_VMCORE is not set in second kernel, one should be
able to correctly determine that we are booting after a panic and setup
calgary iommu accordingly.
o So remove the assumption that elfcorehdr_addr is under
CONFIG_PROC_VMCORE.
o Move definition of elfcorehdr_addr to arch dependent crash files.
(Unfortunately crash dump does not have an arch independent file
otherwise that would have been the best place).
o kexec.c is not the right place as one can Have CRASH_DUMP enabled in
second kernel without KEXEC being enabled.
o I don't see sh setup code parsing the command line for
elfcorehdr_addr. I am wondering how does vmcore interface work on sh.
Anyway, I am atleast defining elfcoredhr_addr so that compilation is not
broken on sh.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: Simon Horman <horms@verge.net.au>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This adds a kconfig option to change the /proc/PID/coredump_filter default.
Fedora has been carrying a trivial patch to change the hard-wired value for
this default, since Fedora 8. The default default can't change safely
because there are old GDB versions out there (all before 6.7) that are
confused by the core dump files created by the MMF_DUMP_ELF_HEADERS setting.
Signed-off-by: Roland McGrath <roland@redhat.com>
Cc: Michael Kerrisk <mtk.manpages@googlemail.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Kawai Hidehiro <hidehiro.kawai.ez@hitachi.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: David Jones <davej@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If the coredumping is multi-threaded, format_corename() appends .%pid to
the corename. This was needed before the proper multi-thread core dump
support, now all the threads in the mm go into a single unified core file.
Remove this special case, it is not even documented and we have "%p"
and core_uses_pid.
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Michael Kerrisk <mtk.manpages@googlemail.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Roland McGrath <roland@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: La Monte Yarroll <piggy@laurelnetworks.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
seq_cpumask_list(), seq_nodemask_list() are very like seq_cpumask(),
seq_nodemask(), but they print human readable string.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Paul Menage <menage@google.com>
Cc: Paul Jackson <pj@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
"m->count + len < m->size" is true commonly, so bitmap_scnprintf()
is commonly called. this fix saves a call to bitmap_scnprintf_len().
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Paul Menage <menage@google.com>
Cc: Paul Jackson <pj@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
A corrupted extent for the extent file itself may try to get an impossible
extent, causing a deadlock if I see it correctly.
Check the inode number after the first_blocks checks and fail if it's the
extent file, as according to the spec the extent file should have no
extent for itself.
Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
A very large directory with many read failures (either due to storage
problems, or due to invalid size & blocks from corruption) will generate a
printk storm as the filesystem continues to try to read all the blocks.
This flood of messages can tie up the box until it is complete - which may
be a very long time, especially for very large corrupted values.
This is fixed by only reporting the corruption once each time we try to
read the directory.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Eugene Teo <eugeneteo@kernel.sg>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
For blocksize < pagesize we need to remove blocks that got allocated in
block_write_begin() if we fail with ENOSPC for later blocks.
block_write_begin() internally does this if it allocated page locally.
This makes sure we don't have blocks outside inode.i_size during ENOSPC.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This fixes a bug where readdir() would return a directory entry twice
if there was a hash collision in an hash tree indexed directory.
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Eugene Dashevsky <eugene@ibrix.com>
Signed-off-by: Mike Snitzer <msnitzer@ibrix.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In ordered mode, if a file data buffer being dirtied exists in the
committing transaction, we write the buffer to the disk, move it from the
committing transaction to the running transaction, then dirty it. But we
don't have to remove the buffer from the committing transaction when the
buffer couldn't be written out, otherwise it would miss the error and the
committing transaction would not abort.
This patch adds an error check before removing the buffer from the
committing transaction.
Signed-off-by: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com>
Acked-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If the journal doesn't abort when it gets an IO error in file data blocks,
the file data corruption will spread silently. Because most of
applications and commands do buffered writes without fsync(), they don't
notice the IO error. It's scary for mission critical systems. On the
other hand, if the journal aborts whenever it gets an IO error in file
data blocks, the system will easily become inoperable. So this patch
introduces a filesystem option to determine whether it aborts the journal
or just call printk() when it gets an IO error in file data.
If you mount a ext3 fs with data_err=abort option, it aborts on file data
write error. If you mount it with data_err=ignore, it doesn't abort, just
call printk(). data_err=ignore is the default.
Signed-off-by: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com>
Cc: Jan Kara <jack@ucw.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
