2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-27 14:43:58 +08:00
Commit Graph

18 Commits

Author SHA1 Message Date
Alexandru Ardelean
075da9cd6a iio: amplifiers: ad8366: Add support for ADL5240 VGA
The ADL5240 is a high performance, digitally controlled variable gain
amplifier (VGA) operating from 100 MHz to 4000 MHz. The VGA integrates a
high performance, 20 dB gain, internally matched amplifier (AMP) with a
6-bit digital step attenuator (DSA) that has a gain control range of
31.5 dB in 0.5 dB steps with ±0.25 dB step accuracy.

Datasheet link:
  https://www.analog.com/media/en/technical-documentation/data-sheets/adl5240.pdf

Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-06-17 21:06:48 +01:00
Paul Cercueil
cee211f4e5 iio: amplifiers: ad8366: Add support for the ADA4961 DGA
This change adds support for the ADA4961 BiCMOS RF Digital Gain Amplifier,
(DGA), which is optimized for driving heavy loads out 2.0 GHz and beyond.
The device typically achieves -90 dBc IMD3 performance at 500 MHz and
-85  dBc at 1.5 GHz.

Datasheet link:
 http://www.analog.com/media/en/technical-documentation/data-sheets/ADA4961.pdf

This change re-uses the existing ad8366 driver, as most logic is similar.
Also, this chip has a reset pin which is initialized during probe.

Signed-off-by: Paul Cercueil <paul.cercueil@analog.com>
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-06-17 21:06:48 +01:00
Alexandru Ardelean
11ab555a6d iio: amplifiers: ad8366: rework driver to allow other chips
The SPI gain amplifiers are simple devices, with 1 or 2 channels, to which
are read-from/written-to.

The gain computation in ad8366_write_raw() has been updated to compute gain
in dB for negative values.

This driver will be extended to support other chips as well.
To do that, this rework handles the AD8366 device as a special-case (via
switch-statements). This will make things easier when adding new chips.

Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-06-17 21:06:47 +01:00
Alexandru Ardelean
dbcf6b5d26 iio: amplifiers: ad8366: use own lock to guard state
This driver is still using iio_dev's mlock to guard against inconsistent
state. This has been discouraged for some time.

This change switches to using it's own mutex, defined on the state struct.

Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-06-17 21:06:47 +01:00
Alexandru Ardelean
38ffa3a34c iio: amplifiers: update license information
Use the new `SPDX-License-Identifier` tag to specify the license.
For ad8366, also update copyright years in the header part.

Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-06-17 21:06:47 +01:00
Michael Hennerich
9920ed25ec drivers: iio: Update MODULE AUTHOR email address
no functional changes

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-08-19 17:23:39 +01:00
Alexandru Ardelean
2636d00575 iio: amplifiers: ad8366: move channel init before iio_device_register()
Otherwise a race condition can occur, where userspace can start operations
before the channels have been properly initialized.

Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-05-22 18:13:45 +01:00
Jonathan Cameron
727929797f iio:amplifiers:ad8366 drop assign iio_info.driver_module and iio_trigger_ops.owner
The equivalent of both of these are now done via macro magic when
the relevant register calls are made.  The actual structure
elements will shortly go away.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
2017-08-22 21:24:50 +01:00
Linus Torvalds
75f5db39ff spi: Updates for v4.4
Quite a lot of activity in SPI this cycle, almost all of it in drivers
 with a few minor improvements and tweaks in the core.
 
  - Updates to pxa2xx to support Intel Broxton and multiple chip selects.
  - Support for big endian in the bcm63xx driver.
  - Multiple slave support for the mt8173
  - New driver for the auxiliary SPI controller in bcm2835 SoCs.
  - Support for Layerscale SoCs in the Freescale DSPI driver.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJWOehzAAoJECTWi3JdVIfQTPYH+wYMDG8gAIw2s0AJ4DvVe4qZ
 sOAm1UgUJZxssrEA6BNqbfM0dfRo+oQJKmRd0Dc5n7LEMsYHdI/5yKHk8PCS6ZzD
 iQyQCzbd0thDAqwuPaMP62cyPDHwyJX22VGTsgVnj6AZqAQ+9+g4SPKhFnm1Mlm4
 hmDi6fdSrsqo8k8gkpVN8RFOfVsjAV1dLtAauQRWDHrqMxXURSrKG76eqAqUa5bn
 BLPXBoj5PA0DMLPO2j+ADZwWN723LrI2mSSlc+ThjEX/OIt2OhAoiOTV5RPqaafy
 TIsCkh68q/gYAsL5HtvvmgZByl41FLYiO0Z+rXmWUyMMbnvhZTLws9S2BNpBLuk=
 =DgXG
 -----END PGP SIGNATURE-----

Merge tag 'spi-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi

Pull spi updates from Mark Brown:
 "Quite a lot of activity in SPI this cycle, almost all of it in drivers
  with a few minor improvements and tweaks in the core.

   - Updates to pxa2xx to support Intel Broxton and multiple chip selects.
   - Support for big endian in the bcm63xx driver.
   - Multiple slave support for the mt8173
   - New driver for the auxiliary SPI controller in bcm2835 SoCs.
   - Support for Layerscale SoCs in the Freescale DSPI driver"

* tag 'spi-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (87 commits)
  spi: pxa2xx: Rework self-initiated platform data creation for non-ACPI
  spi: pxa2xx: Add support for Intel Broxton
  spi: pxa2xx: Detect number of enabled Intel LPSS SPI chip select signals
  spi: pxa2xx: Add output control for multiple Intel LPSS chip selects
  spi: pxa2xx: Use LPSS prefix for defines that are Intel LPSS specific
  spi: Add DSPI support for layerscape family
  spi: ti-qspi: improve ->remove() callback
  spi/spi-xilinx: Fix race condition on last word read
  spi: Drop owner assignment from spi_drivers
  spi: Add THIS_MODULE to spi_driver in SPI core
  spi: Setup the master controller driver before setting the chipselect
  spi: dw: replace magic constant by DW_SPI_DR
  spi: mediatek: mt8173 spi multiple devices support
  spi: mediatek: handle controller_data in mtk_spi_setup
  spi: mediatek: remove mtk_spi_config
  spi: mediatek: Update document devicetree bindings to support multiple devices
  spi: fix kernel-doc warnings about missing return desc in spi.c
  spi: fix kernel-doc warnings about missing return desc in spi.h
  spi: pxa2xx: Align a few defines
  spi: pxa2xx: Save other reg_cs_ctrl bits when configuring chip select
  ...
2015-11-05 13:15:12 -08:00
Andrew F. Davis
3821a065f5 spi: Drop owner assignment from spi_drivers
An spi_driver does not need to set an owner, it will be populated by the
driver core.

Signed-off-by: Andrew F. Davis <afd@ti.com>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-28 10:30:17 +09:00
Javier Martinez Canillas
ed199a11bd iio: Export SPI module alias information in missing drivers
The SPI core always reports the MODALIAS uevent as "spi:<modalias>"
regardless of the mechanism that was used to register the device
(i.e: OF or board code) and the table that is used later to match
the driver with the device (i.e: SPI id table or OF match table).

So drivers needs to export the SPI id table and this be built into
the module or udev won't have the necessary information to autoload
the needed driver module when the device is added.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-08-22 19:07:09 +01:00
Roberta Dobrescu
ff6f46295d iio: amplifiers: ad8366: Use right order for type specification
This patch fixes the following checkpatch.pl warning:
WARNING: type 'char unsigned' should be specified in [[un]signed]
[short|int|long|long long] order

Signed-off-by: Roberta Dobrescu <roberta.dobrescu@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-01-01 12:16:57 +00:00
Roberta Dobrescu
c5878d9dbb iio: amplifiers: ad8366: Remove space before ','
This patch fixes the following checkpatch.pl error:
ERROR: space prohibited before that ',' (ctx:WxW)

Signed-off-by: Roberta Dobrescu <roberta.dobrescu@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-01-01 12:16:07 +00:00
Sachin Kamat
d3789c3ee2 iio: amplifiers: ad8366: Remove regulator_put
Since devm_regulator_get is used, regulator_put should not be
used. Remove it.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-09-28 11:49:45 +01:00
Sachin Kamat
36db8c7216 iio: amplifiers: ad8366: Use devm_* APIs
devm_* APIs are device managed and make code simpler.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Cc: Michael Hennerich <hennerich@blackfin.uclinux.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-08-03 21:00:15 +01:00
Jonathan Cameron
b34ec6f347 iio:amplifiers:ad8366 move to info_mask_(shared_by_type/separate)
The original info_mask is going away in favour of the broken out versions.

Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
2013-03-17 19:49:30 +00:00
Greg Kroah-Hartman
fc52692c49 Drivers: iio: remove __dev* attributes.
CONFIG_HOTPLUG is going away as an option.  As a result, the __dev*
markings need to be removed.

This change removes the use of __devinit, __devexit_p, and __devexit
from these drivers.

Based on patches originally written by Bill Pemberton, but redone by me
in order to handle some of the coding style issues better, by hand.

Cc: Bill Pemberton <wfp5p@virginia.edu>
Cc: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-03 15:57:03 -08:00
Michael Hennerich
e71d42e03c iio: amplifiers: New driver for AD8366 Dual-Digital Variable Gain Amplifier
Changes since V1:

Apply review feedback:
	Introduce and use IIO_CHAN_INFO_HARDWAREGAIN
	Introduce and use Use IIO_VAL_INT_PLUS_MICRO_DB

Modify out of staging include paths.
Convert to new iio core API naming.

Changes since V2:

more sanity checking in write_raw

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-14 13:15:39 -07:00