Just drop the "linux" part of the path, it was never correct.
Reported-by: Joe Perches <joe@perches.com>
Fixes: 256ac03750 ("dt-bindings: document devicetree bindings for mux-controllers and gpio-mux")
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The file is GPL v2 or later.
Acked-by: Mircea Caprioru <mircea.caprioru@analog.com>
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Access to the list of cells by /proc/net/afs/cells has a couple of
problems:
(1) It should be checking against SEQ_START_TOKEN for the keying the
header line.
(2) It's only holding the RCU read lock, so it can't just walk over the
list without following the proper RCU methods.
Fix these by using an hlist instead of an ordinary list and using the
appropriate accessor functions to follow it with RCU.
Since the code that adds a cell to the list must also necessarily change,
sort the list on insertion whilst we're at it.
Fixes: 989782dcdc ("afs: Overhaul cell database management")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
- Avoid fragile multiblock reads for the last sector in SPI mode
WIFI/SDIO:
- libertas: Fixup suspend sequence for the SDIO card
-----BEGIN PGP SIGNATURE-----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=s+ye
-----END PGP SIGNATURE-----
Merge tag 'mmc-v4.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Ulf writes:
"MMC core:
- Avoid fragile multiblock reads for the last sector in SPI mode
WIFI/SDIO:
- libertas: Fixup suspend sequence for the SDIO card"
* tag 'mmc-v4.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
libertas: call into generic suspend code before turning off power
mmc: block: avoid multiblock reads for the last sector in SPI mode
- Fix up the interrupt parent for the irqdomains.
-----BEGIN PGP SIGNATURE-----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=5Sij
-----END PGP SIGNATURE-----
Merge tag 'gpio-v4.19-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Linus writes:
"GPIO fix for the v4.19 series:
- Fix up the interrupt parent for the irqdomains."
* tag 'gpio-v4.19-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
gpio: Assign gpio_irq_chip::parents to non-stack pointer
- Interrupt setup in the MCP23S08 driver.
-----BEGIN PGP SIGNATURE-----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=XPcv
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v4.19-5' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Linus writes:
"pin control fix for v4.19:
A single pin control fix for v4.19:
- Interrupt setup in the MCP23S08 driver."
* tag 'pinctrl-v4.19-5' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: mcp23s08: fix irq and irqchip setup order
-----BEGIN PGP SIGNATURE-----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=8MHk
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2018-10-12-1' of git://anongit.freedesktop.org/drm/drm
Dave writes:
"drm fixes for 4.19-rc8
single nouveau runtime reference and mst change"
* tag 'drm-fixes-2018-10-12-1' of git://anongit.freedesktop.org/drm/drm:
drm/nouveau/drm/nouveau: Grab runtime PM ref in nv50_mstc_detect()
We only have one bug to submit this time around. It fixes a DMA unmap
issue where we unmapped the DMA address from the IOMMU before we did
from the card, resulting in a DMAR error with IOMMU enabled, or possible
crash without.
-----BEGIN PGP SIGNATURE-----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=hozJ
-----END PGP SIGNATURE-----
Merge tag 'for-gkh' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Doug writes:
"RDMA fixes:
Final for-rc pull request for 4.19
We only have one bug to submit this time around. It fixes a DMA
unmap issue where we unmapped the DMA address from the IOMMU before
we did from the card, resulting in a DMAR error with IOMMU enabled,
or possible crash without."
* tag 'for-gkh' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
IB/mlx5: Unmap DMA addr from HCA before IOMMU
Dmitry writes:
"Input updates for v4.19-rc7
- we added a few scheduling points into various input interfaces to
ensure that large writes will not cause RCU stalls
- fixed configuring PS/2 keyboards as wakeup devices on newer
platforms
- added a new Xbox gamepad ID."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: uinput - add a schedule point in uinput_inject_events()
Input: evdev - add a schedule point in evdev_write()
Input: mousedev - add a schedule point in mousedev_write()
Input: i8042 - enable keyboard wakeups by default when s2idle is used
Input: xpad - add support for Xbox1 PDP Camo series gamepad
Commit
6b7dca401c ("tracing: Allow gcov profiling on only ftrace subsystem")
uncovered linker problems when using gcov kernel profiling on some
architectures. These problems were likely introduced earlier, and are
possibly related to compiler changes.
-----BEGIN PGP SIGNATURE-----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=mvmS
-----END PGP SIGNATURE-----
Merge tag 'next-fixes-20181012' of git://git.kernel.org/pub/scm/linux/kernel/git/sfr/next-fixes
Stephen writes:
"A couple of warning fixes:
Two fixes from Peter Oberparleiter <oberpar@linux.ibm.com>:
Commit 6b7dca401c ("tracing: Allow gcov profiling on only ftrace subsystem")
uncovered linker problems when using gcov kernel profiling on some
architectures. These problems were likely introduced earlier, and are
possibly related to compiler changes."
* tag 'next-fixes-20181012' of git://git.kernel.org/pub/scm/linux/kernel/git/sfr/next-fixes:
vmlinux.lds.h: Fix linker warnings about orphan .LPBX sections
vmlinux.lds.h: Fix incomplete .text.exit discards
The previous patch introduced very large kernel stack usage and a Makefile
change to hide the warning about it.
From what I can tell, a number of things went wrong here:
- The BCH_MAX_T constant was set to the maximum value for 'n',
not the maximum for 't', which is much smaller.
- The stack usage is actually larger than the entire kernel stack
on some architectures that can use 4KB stacks (m68k, sh, c6x), which
leads to an immediate overrun.
- The justification in the patch description claimed that nothing
changed, however that is not the case even without the two points above:
the configuration is machine specific, and most boards never use the
maximum BCH_ECC_WORDS() length but instead have something much smaller.
That maximum would only apply to machines that use both the maximum
block size and the maximum ECC strength.
The largest value for 't' that I could find is '32', which in turn leads
to a 60 byte array instead of 2048 bytes. Making it '64' for future
extension seems also worthwhile, with 120 bytes for the array. Anything
larger won't fit into the OOB area on NAND flash.
With that changed, the warning can be enabled again.
Only linux-4.19+ contains the breakage, so this is only needed
as a stable backport if it does not make it into the release.
Fixes: 02361bc778 ("lib/bch: Remove VLA usage")
Reported-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: stable@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
David writes:
"Networking
1) RXRPC receive path fixes from David Howells.
2) Re-export __skb_recv_udp(), from Jiri Kosina.
3) Fix refcounting in u32 classificer, from Al Viro.
4) Userspace netlink ABI fixes from Eugene Syromiatnikov.
5) Don't double iounmap on rmmod in ena driver, from Arthur
Kiyanovski.
6) Fix devlink string attribute handling, we must pull a copy into a
kernel buffer if the lifetime extends past the netlink request.
From Moshe Shemesh.
7) Fix hangs in RDS, from Ka-Cheong Poon.
8) Fix recursive locking lockdep warnings in tipc, from Ying Xue.
9) Clear RX irq correctly in socionext, from Ilias Apalodimas.
10) bcm_sf2 fixes from Florian Fainelli."
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (38 commits)
net: dsa: bcm_sf2: Call setup during switch resume
net: dsa: bcm_sf2: Fix unbind ordering
net: phy: sfp: remove sfp_mutex's definition
r8169: set RX_MULTI_EN bit in RxConfig for 8168F-family chips
net: socionext: clear rx irq correctly
net/mlx4_core: Fix warnings during boot on driverinit param set failures
tipc: eliminate possible recursive locking detected by LOCKDEP
selftests: udpgso_bench.sh explicitly requires bash
selftests: rtnetlink.sh explicitly requires bash.
qmi_wwan: Added support for Gemalto's Cinterion ALASxx WWAN interface
tipc: queue socket protocol error messages into socket receive buffer
tipc: set link tolerance correctly in broadcast link
net: ipv4: don't let PMTU updates increase route MTU
net: ipv4: update fnhe_pmtu when first hop's MTU changes
net/ipv6: stop leaking percpu memory in fib6 info
rds: RDS (tcp) hangs on sendto() to unresponding address
net: make skb_partial_csum_set() more robust against overflows
devlink: Add helper function for safely copy string param
devlink: Fix param cmode driverinit for string type
devlink: Fix param set handling for string type
...
Florian Fainelli says:
====================
net: dsa: bcm_sf2: Couple of fixes
Here are two fixes for the bcm_sf2 driver that were found during
testing unbind and analysing another issue during system
suspend/resume.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
There is no reason to open code what the switch setup function does, in
fact, because we just issued a switch reset, we would make all the
register get their default values, including for instance, having unused
port be enabled again and wasting power and leading to an inappropriate
switch core clock being selected.
Fixes: 8cfa94984c ("net: dsa: bcm_sf2: add suspend/resume callbacks")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The order in which we release resources is unfortunately leading to bus
errors while dismantling the port. This is because we set
priv->wol_ports_mask to 0 to tell bcm_sf2_sw_suspend() that it is now
permissible to clock gate the switch. Later on, when dsa_slave_destroy()
comes in from dsa_unregister_switch() and calls
dsa_switch_ops::port_disable, we perform the same dismantling again, and
this time we hit registers that are clock gated.
Make sure that dsa_unregister_switch() is the first thing that happens,
which takes care of releasing all user visible resources, then proceed
with clock gating hardware. We still need to set priv->wol_ports_mask to
0 to make sure that an enabled port properly gets disabled in case it
was previously used as part of Wake-on-LAN.
Fixes: d9338023fb ("net: dsa: bcm_sf2: Make it a real platform device driver")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Enabling both CONFIG_LD_DEAD_CODE_DATA_ELIMINATION=y and
CONFIG_GCOV_PROFILE_ALL=y results in linker warnings:
warning: orphan section `.data..LPBX1' being placed in
section `.data..LPBX1'.
LD_DEAD_CODE_DATA_ELIMINATION adds compiler flag -fdata-sections. This
option causes GCC to create separate data sections for data objects,
including those generated by GCC internally for gcov profiling. The
names of these objects start with a dot (.LPBX0, .LPBX1), resulting in
section names starting with 'data..'.
As section names starting with 'data..' are used for specific purposes
in the Linux kernel, the linker script does not automatically include
them in the output data section, resulting in the "orphan section"
linker warnings.
Fix this by specifically including sections named "data..LPBX*" in the
data section.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Tested-by: Stephen Rothwell <sfr@canb.auug.org.au>
Tested-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Enabling CONFIG_GCOV_PROFILE_ALL=y causes linker errors on ARM:
`.text.exit' referenced in section `.ARM.exidx.text.exit':
defined in discarded section `.text.exit'
`.text.exit' referenced in section `.fini_array.00100':
defined in discarded section `.text.exit'
And related errors on NDS32:
`.text.exit' referenced in section `.dtors.65435':
defined in discarded section `.text.exit'
The gcov compiler flags cause certain compiler versions to generate
additional destructor-related sections that are not yet handled by the
linker script, resulting in references between discarded and
non-discarded sections.
Since destructors are not used in the Linux kernel, fix this by
discarding these additional sections.
Reported-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reported-by: Greentime Hu <green.hu@gmail.com>
Tested-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
The sfp_mutex variable is defined but never used in this file. Not even
in the commit that introduced that variable.
Remove sfp_mutex, it has no purpose.
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
It has been reported that since
commit 05212ba813 ("r8169: set RxConfig after tx/rx is enabled for RTL8169sb/8110sb devices")
at least RTL_GIGA_MAC_VER_38 NICs work erratically after a resume from
suspend.
The problem has been traced to a missing RX_MULTI_EN bit in the RxConfig
register.
We already set this bit for RTL_GIGA_MAC_VER_35 NICs of the same 8168F
chip family so let's do it also for its other siblings: RTL_GIGA_MAC_VER_36
and RTL_GIGA_MAC_VER_38.
Curiously, the NIC seems to work fine after a system boot without having
this bit set as long as the system isn't suspended and resumed.
Fixes: 05212ba813 ("r8169: set RxConfig after tx/rx is enabled for RTL8169sb/8110sb devices")
Reported-by: Chris Clayton <chris2553@googlemail.com>
Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
Tested-by: Chris Clayton <chris2553@googlemail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
commit 63ae7949e9 ("net: socionext: Use descriptor info instead of MMIO reads on Rx")
removed constant mmio reads from the driver and started using a descriptor
field to check if packet should be processed.
This lead the napi rx handler being constantly called while no packets
needed processing and ksoftirq getting 100% cpu usage. Issue one mmio read
to clear the irq correcty after processing packets
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reported-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
During boot, mlx4_core sets the driverinit configuration parameters and
updates the devlink module on the initial values calling
devlink_param_driverinit_value_set().
If devlink_param_driverinit_value_set() returns an error mlx4_core
reports kernel module warning.
This caused false alarm during boot in case kernel was compiled with
CONFIG_NET_DEVLINK off.
Fix by removing warning reported in case
devlink_param_driverinit_value_set() fails.
This actually makes the function mlx4_devlink_set_init_value()
redundant to using directly devlink_param_driverinit_value_set() and so
removed.
It fixes the following kernel trace:
mlx4_core 0000:00:06.0: devlink set parameter 0 value failed (err = -95)
mlx4_core 0000:00:06.0: devlink set parameter 1 value failed (err = -95)
mlx4_core 0000:00:06.0: devlink set parameter 4 value failed (err = -95)
mlx4_core 0000:00:06.0: devlink set parameter 5 value failed (err = -95)
mlx4_core 0000:00:06.0: devlink set parameter 3 value failed (err = -95)
Fixes: bd1b51dc66 ("mlx4: Add mlx4 initial parameters table and register it")
Signed-off-by: Moshe Shemesh <moshe@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tejun writes:
"cgroup fixes for v4.19-rc7
One cgroup2 threaded mode fix for v4.19-rc7. While threaded mode
isn't used widely (yet) and the bug requires somewhat convoluted
sequence of operations, it causes a userland visible malfunction -
EINVAL on a valid attempt to enable threaded mode. This pull request
contains the fix"
* 'for-4.19-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: Fix dom_cgrp propagation when enabling threaded mode
When booting kernel with LOCKDEP option, below warning info was found:
WARNING: possible recursive locking detected
4.19.0-rc7+ #14 Not tainted
--------------------------------------------
swapper/0/1 is trying to acquire lock:
00000000dcfc0fc8 (&(&list->lock)->rlock#4){+...}, at: spin_lock_bh
include/linux/spinlock.h:334 [inline]
00000000dcfc0fc8 (&(&list->lock)->rlock#4){+...}, at:
tipc_link_reset+0x125/0xdf0 net/tipc/link.c:850
but task is already holding lock:
00000000cbb9b036 (&(&list->lock)->rlock#4){+...}, at: spin_lock_bh
include/linux/spinlock.h:334 [inline]
00000000cbb9b036 (&(&list->lock)->rlock#4){+...}, at:
tipc_link_reset+0xfa/0xdf0 net/tipc/link.c:849
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&(&list->lock)->rlock#4);
lock(&(&list->lock)->rlock#4);
*** DEADLOCK ***
May be due to missing lock nesting notation
2 locks held by swapper/0/1:
#0: 00000000f7539d34 (pernet_ops_rwsem){+.+.}, at:
register_pernet_subsys+0x19/0x40 net/core/net_namespace.c:1051
#1: 00000000cbb9b036 (&(&list->lock)->rlock#4){+...}, at:
spin_lock_bh include/linux/spinlock.h:334 [inline]
#1: 00000000cbb9b036 (&(&list->lock)->rlock#4){+...}, at:
tipc_link_reset+0xfa/0xdf0 net/tipc/link.c:849
stack backtrace:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.19.0-rc7+ #14
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x1af/0x295 lib/dump_stack.c:113
print_deadlock_bug kernel/locking/lockdep.c:1759 [inline]
check_deadlock kernel/locking/lockdep.c:1803 [inline]
validate_chain kernel/locking/lockdep.c:2399 [inline]
__lock_acquire+0xf1e/0x3c60 kernel/locking/lockdep.c:3411
lock_acquire+0x1db/0x520 kernel/locking/lockdep.c:3900
__raw_spin_lock_bh include/linux/spinlock_api_smp.h:135 [inline]
_raw_spin_lock_bh+0x31/0x40 kernel/locking/spinlock.c:168
spin_lock_bh include/linux/spinlock.h:334 [inline]
tipc_link_reset+0x125/0xdf0 net/tipc/link.c:850
tipc_link_bc_create+0xb5/0x1f0 net/tipc/link.c:526
tipc_bcast_init+0x59b/0xab0 net/tipc/bcast.c:521
tipc_init_net+0x472/0x610 net/tipc/core.c:82
ops_init+0xf7/0x520 net/core/net_namespace.c:129
__register_pernet_operations net/core/net_namespace.c:940 [inline]
register_pernet_operations+0x453/0xac0 net/core/net_namespace.c:1011
register_pernet_subsys+0x28/0x40 net/core/net_namespace.c:1052
tipc_init+0x83/0x104 net/tipc/core.c:140
do_one_initcall+0x109/0x70a init/main.c:885
do_initcall_level init/main.c:953 [inline]
do_initcalls init/main.c:961 [inline]
do_basic_setup init/main.c:979 [inline]
kernel_init_freeable+0x4bd/0x57f init/main.c:1144
kernel_init+0x13/0x180 init/main.c:1063
ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:413
The reason why the noise above was complained by LOCKDEP is because we
nested to hold l->wakeupq.lock and l->inputq->lock in tipc_link_reset
function. In fact it's unnecessary to move skb buffer from l->wakeupq
queue to l->inputq queue while holding the two locks at the same time.
Instead, we can move skb buffers in l->wakeupq queue to a temporary
list first and then move the buffers of the temporary list to l->inputq
queue, which is also safe for us.
Fixes: 3f32d0be6c ("tipc: lock wakeup & inputq at tipc_link_reset()")
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Ying Xue <ying.xue@windriver.com>
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
- Fix warnings from recordmcount.pl when building with Clang
- Allow Clang to use GNU toolchains correctly
- Disable CONFIG_SAMPLES for UML to avoid build error
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=bOon
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-v4.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Masahiro writes:
"Kbuild fixes for v4.19 (2nd)
- Fix warnings from recordmcount.pl when building with Clang
- Allow Clang to use GNU toolchains correctly
- Disable CONFIG_SAMPLES for UML to avoid build error"
* tag 'kbuild-fixes-v4.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
samples: disable CONFIG_SAMPLES for UML
kbuild: allow to use GCC toolchain not in Clang search path
ftrace: Build with CPPFLAGS to get -Qunused-arguments
Paolo Abeni says:
====================
net: explicitly requires bash when needed.
Some test scripts require bash-only features but use the default shell.
This may cause random failures if the default shell is not bash.
Instead of doing a potentially complex rewrite of such scripts, these patches
require the bash interpreter, where needed.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The udpgso_bench.sh script requires several bash-only features. This
may cause random failures if the default shell is not bash.
Address the above explicitly requiring bash as the script interpreter
Fixes: 3a687bef14 ("selftests: udp gso benchmark")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
the script rtnetlink.sh requires a bash-only features (sleep with sub-second
precision). This may cause random test failure if the default shell is not
bash.
Address the above explicitly requiring bash as the script interpreter.
Fixes: 33b01b7b4f ("selftests: add rtnetlink test script")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ingo writes:
"x86 fixes
An intel_rdt memory access fix and a VLA fix in pgd_alloc()."
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm: Avoid VLA in pgd_alloc()
x86/intel_rdt: Fix out-of-bounds memory access in CBM tests
Ingo writes:
"scheduler fix:
Cleanup of dead code left over from the recent sched/numa fixes."
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
mm, sched/numa: Remove remaining traces of NUMA rate-limiting
Ingo, a man of few words, writes:
"perf fixes:
misc perf tooling fixes"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf record: Use unmapped IP for inline callchain cursors
perf python: Use -Wno-redundant-decls to build with PYTHON=python3
perf report: Don't try to map ip to invalid map
perf script python: Fix export-to-sqlite.py sample columns
perf script python: Fix export-to-postgresql.py occasional failure
Added support for Gemalto's Cinterion ALASxx WWAN interfaces
by adding QMI_FIXED_INTF with Cinterion's VID and PID.
Signed-off-by: Giacinto Cifelli <gciofono@gmail.com>
Acked-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
In tipc_sk_filter_rcv(), when we detect protocol messages with error we
call tipc_sk_conn_proto_rcv() and let it reset the connection and notify
the socket by calling sk->sk_state_change().
However, tipc_sk_filter_rcv() may have been called from the function
tipc_backlog_rcv(), in which case the socket lock is held and the socket
already awake. This means that the sk_state_change() call is ignored and
the error notification lost. Now the receive queue will remain empty and
the socket sleeps forever.
In this commit, we convert the protocol message into a connection abort
message and enqueue it into the socket's receive queue. By this addition
to the above state change we cover all conditions.
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In the patch referred to below we added link tolerance as an additional
criteria for declaring broadcast transmission "stale" and resetting the
affected links.
However, the 'tolerance' field of the broadcast link is never set, and
remains at zero. This renders the whole commit without the intended
improving effect, but luckily also with no negative effect.
In this commit we add the missing initialization.
Fixes: a4dc70d46c ("tipc: extend link reset criteria for stale packet retransmission")
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sabrina Dubroca says:
====================
net: ipv4: fixes for PMTU when link MTU changes
The first patch adapts the changes that commit e9fa1495d7 ("ipv6:
Reflect MTU changes on PMTU of exceptions for MTU-less routes") did in
IPv6 to IPv4: lower PMTU when the first hop's MTU drops below it, and
raise PMTU when the first hop was limiting PMTU discovery and its MTU
is increased.
The second patch fixes bugs introduced in commit d52e5a7e7c ("ipv4:
lock mtu in fnhe when received PMTU < net.ipv4.route.min_pmtu") that
only appear once the first patch is applied.
Selftests for these cases were introduced in net-next commit
e44e428f59 ("selftests: pmtu: add basic IPv4 and IPv6 PMTU tests")
v2: add cover letter, and fix a few small things in patch 1
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
When an MTU update with PMTU smaller than net.ipv4.route.min_pmtu is
received, we must clamp its value. However, we can receive a PMTU
exception with PMTU < old_mtu < ip_rt_min_pmtu, which would lead to an
increase in PMTU.
To fix this, take the smallest of the old MTU and ip_rt_min_pmtu.
Before this patch, in case of an update, the exception's MTU would
always change. Now, an exception can have only its lock flag updated,
but not the MTU, so we need to add a check on locking to the following
"is this exception getting updated, or close to expiring?" test.
Fixes: d52e5a7e7c ("ipv4: lock mtu in fnhe when received PMTU < net.ipv4.route.min_pmtu")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since commit 5aad1de5ea ("ipv4: use separate genid for next hop
exceptions"), exceptions get deprecated separately from cached
routes. In particular, administrative changes don't clear PMTU anymore.
As Stefano described in commit e9fa1495d7 ("ipv6: Reflect MTU changes
on PMTU of exceptions for MTU-less routes"), the PMTU discovered before
the local MTU change can become stale:
- if the local MTU is now lower than the PMTU, that PMTU is now
incorrect
- if the local MTU was the lowest value in the path, and is increased,
we might discover a higher PMTU
Similarly to what commit e9fa1495d7 did for IPv6, update PMTU in those
cases.
If the exception was locked, the discovered PMTU was smaller than the
minimal accepted PMTU. In that case, if the new local MTU is smaller
than the current PMTU, let PMTU discovery figure out if locking of the
exception is still needed.
To do this, we need to know the old link MTU in the NETDEV_CHANGEMTU
notifier. By the time the notifier is called, dev->mtu has been
changed. This patch adds the old MTU as additional information in the
notifier structure, and a new call_netdevice_notifiers_u32() function.
Fixes: 5aad1de5ea ("ipv4: use separate genid for next hop exceptions")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The fib6_info_alloc() function allocates percpu memory to hold per CPU
pointers to rt6_info, but this memory is never freed. Fix it.
Fixes: a64efe142f ("net/ipv6: introduce fib6_info struct and helpers")
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----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=q6E6
-----END PGP SIGNATURE-----
Merge tag 'rxrpc-fixes-20181008' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
David Howells says:
====================
rxrpc: Fix packet reception code
Here are a set of patches that prepares for and fix problems in rxrpc's
package reception code. There serious problems are:
(A) There's a window between binding the socket and setting the data_ready
hook in which packets can find their way into the UDP socket's receive
queues.
(B) The skb_recv_udp() will return an error (and clear the error state) if
there was an error on the Tx side. rxrpc doesn't handle this.
(C) The rxrpc data_ready handler doesn't fully drain the UDP receive
queue.
(D) The rxrpc data_ready handler assumes it is called in a non-reentrant
state.
The second patch fixes (A) - (C); the third patch renders (B) and (C)
non-issues by using the recap_rcv hook instead of data_ready - and the
final patch fixes (D). That last is the most complex.
The preparatory patches are:
(1) Fix some places that are doing things in the wrong net namespace.
(2) Stop taking the rcu read lock as it's held by the IP input routine in
the call chain.
(3) Only end the Tx phase if *we* rotated the final packet out of the Tx
buffer.
(4) Don't assume that the call state won't change after dropping the
call_state lock.
(5) Only take receive window and MTU suze parameters from an ACK packet if
it's the latest ACK packet.
(6) Record connection-level abort information correctly.
(7) Fix a trace line.
And then there are three main patches - note that these are mixed in with
the preparatory patches somewhat:
(1) Fix the setup window (A), skb_recv_udp() error check (B) and packet
drainage (C).
(2) Switch to using the encap_rcv instead of data_ready to cut out the
effects of the UDP read queues and get the packets delivered directly.
(3) Add more locking into the various packet input paths to defend against
re-entrance (D).
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
In rds_send_mprds_hash(), if the calculated hash value is non-zero and
the MPRDS connections are not yet up, it will wait. But it should not
wait if the send is non-blocking. In this case, it should just use the
base c_path for sending the message.
Signed-off-by: Ka-Cheong Poon <ka-cheong.poon@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
checked for CONFIG_DM_ZONED rather than CONFIG_BLK_DEV_ZONED.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJbvsLkAAoJEMUj8QotnQNaGLMIAOOCRjlNfzAgtFixyk53GF4g
oUbWaIhp1j27t3xq8K7A0yOG6mILZZd39mtnkW1Zo5TA+kWdMmJDij/QAhd4MKFl
m+SUjHr97hbXwRJSOm2qjfm6syfuSXLYWhW2/z9KI3bT6lQg5KAdhGGka3P5ZJ7r
awNxV2K9vuog4OAS8b56dHsELmhvdNd8dKZ8eX//eP9d/3FCGH7ZmKukxAZMf4OW
WK9ym5cDulCzvNMnfvCKmMZQJHoWvaIv6wckl20P8BImdM8hJmwPCrQvOqNRztHM
y15XyKHHqyDSwPByNCzJZ3KnHywdkg988p4bwRO/ciCYRCHfdmOxBlaY7SVIQi0=
=W4w5
-----END PGP SIGNATURE-----
Merge tag 'for-4.19/dm-fixes-4' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Mike writes:
"device mapper fix for 4.19 final
- Fix for earlier 4.19 final DM linear change that incorrectly
checked for CONFIG_DM_ZONED rather than CONFIG_BLK_DEV_ZONED."
* tag 'for-4.19/dm-fixes-4' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm linear: fix linear_end_io conditional definition
Update for 4.19-rc7 to fix numerous file clone and deduplication issues.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=yj1P
-----END PGP SIGNATURE-----
Merge tag 'xfs-fixes-for-4.19-rc7' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Dave writes:
"xfs: fixes for 4.19-rc7
Update for 4.19-rc7 to fix numerous file clone and deduplication issues."
* tag 'xfs-fixes-for-4.19-rc7' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: fix data corruption w/ unaligned reflink ranges
xfs: fix data corruption w/ unaligned dedupe ranges
xfs: update ctime and remove suid before cloning files
xfs: zero posteof blocks when cloning above eof
xfs: refactor clonerange preparation into a separate helper
The dm-linear target is independent of the dm-zoned target. For code
requiring support for zoned block devices, use CONFIG_BLK_DEV_ZONED
instead of CONFIG_DM_ZONED.
While at it, similarly to dm linear, also enable the DM_TARGET_ZONED_HM
feature in dm-flakey only if CONFIG_BLK_DEV_ZONED is defined.
Fixes: beb9caac21 ("dm linear: eliminate linear_end_io call if CONFIG_DM_ZONED disabled")
Fixes: 0be12c1c7f ("dm linear: add support for zoned block devices")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
cleanup a KMEM_CACHE if target registration fails.
- Two stable@ fixes for DM zoned target; 4.20 will have changes that
eliminate this code entirely but <= 4.19 needs these changes.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJbviuKAAoJEMUj8QotnQNa06YH/1JiwvxQzgWVfyjWeYNlK81Y
BTo0CRH+T8qe0LVF3Y5Dz4oH3JVlU7SrlseTn57tR/gmPgE88XXByOlr1VAvqaEj
x//MAEVQcvWE8luF/QEK04/eUCPK+U0L4ix2YSKngS/IkeMzfEtSiki4FgRrR8OI
qLwNRpWoTOOBRMBkJEaDbD4uOzHKoK+LdPekbWrFx0j231Tp3iuxD+/gaRmWBKip
LFm45rXuFJB8+ZUrsO8wlHGMVoe8yo9D7qfdYG0DUXRcE+iXl7ml3kPPu09e9+zY
1JYxXJzsbGuRfknf0zj5sETxuE2fVJhhPv2zsIdIlGBvyRUO2ELUyRhOENhU4XI=
=RGlv
-----END PGP SIGNATURE-----
Merge tag 'for-4.19/dm-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Mike writes:
"device mapper fixes for 4.19 final
- Fix a DM cache module init error path bug that doesn't properly
cleanup a KMEM_CACHE if target registration fails.
- Two stable@ fixes for DM zoned target; 4.20 will have changes that
eliminate this code entirely but <= 4.19 needs these changes."
* tag 'for-4.19/dm-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm linear: eliminate linear_end_io call if CONFIG_DM_ZONED disabled
dm: fix report zone remapping to account for partition offset
dm cache: destroy migration_cache if cache target registration failed
values that came after a dereference pointer.
trace_printk() utilizes vbin_printf() and bstr_printf() to keep the
overhead of tracing down. vbin_printf() does not do any conversions
and just stors the string format and the raw arguments into the
buffer. bstr_printf() is used to read the buffer and does the conversions
to complete the printf() output.
This can be troublesome with dereferenced pointers because the reference
may be different from the time vbin_printf() is called to the time
bstr_printf() is called. To fix this, a prior commit changed vbin_printf()
to convert dereferenced pointers into strings and load the converted
string into the buffer. But the change to bstr_printf() had an off-by-one
error and didn't account for the nul character at the end of the string
and this corrupted the rest of the values in the format that came after
a dereferenced pointer.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCW737iRQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qnraAQDVbp0aWOpS73YUVbW/bArC8t8Z6/9h
bXLeCdSSa1BHswD+K+kj7NiVrxIzyXrotb40JoscLsaXSIEJjlNFHQKqxQQ=
=4BpJ
-----END PGP SIGNATURE-----
Merge tag 'trace-v4.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Steven writes:
"vsprint fix:
It was reported that trace_printk() was not reporting properly
values that came after a dereference pointer.
trace_printk() utilizes vbin_printf() and bstr_printf() to keep the
overhead of tracing down. vbin_printf() does not do any conversions
and just stors the string format and the raw arguments into the
buffer. bstr_printf() is used to read the buffer and does the
conversions to complete the printf() output.
This can be troublesome with dereferenced pointers because the
reference may be different from the time vbin_printf() is called to
the time bstr_printf() is called. To fix this, a prior commit changed
vbin_printf() to convert dereferenced pointers into strings and load
the converted string into the buffer. But the change to bstr_printf()
had an off-by-one error and didn't account for the nul character at
the end of the string and this corrupted the rest of the values in
the format that came after a dereferenced pointer."
* tag 'trace-v4.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
vsprintf: Fix off-by-one bug in bstr_printf() processing dereferenced pointers
- Fix DT unittest on Oldworld MAC systems
-----BEGIN PGP SIGNATURE-----
iQJEBAABCgAuFiEEktVUI4SxYhzZyEuo+vtdtY28YcMFAlu95pgQHHJvYmhAa2Vy
bmVsLm9yZwAKCRD6+121jbxhwxHjEACgsFN0hQTsM4EKWN2kXRrDH5S5amXLa787
rI+tbdKDUkKTk94Ue+8Gm681Y9Euhecd3rMkZ4D+v0s63hbvxZV6DawuVE0ifhX9
K5x2Ara592rkMs4GT9GLysjWwJ6c7mV1yJdzZnsqzVSXTkMYIBUf1MI8i8nLFet2
8BnOt8sLKE8NJ3VwgDgb4hrF2tSZyl8UD/Bdn2AKPAZ6hKFW1ZL1ef0OZq7EoiLS
W3/2XM8Z0Ti7HuONyWxP+GhBkQOcxkuBRui4L1MkFXb4ENyfJEh9uZ+dz/hoXORI
y6WtNIGaOFFCGbT0IvFqqPly29JNchIAhG4B6MsLVHtg1wgOJ0z9iL4AZkIQJ+/B
GB0+ApcQk6cFvEe0EunqSZgoV6SuVLni5dUlmLAbm6mlUtbHNUjlW9o4DBv7uB0n
F6Rh0ruXm5VbLildpHXi6WcP7ijT03mbB4B9PRVC+ve9S8sKU1T3u7V2pUdOIerX
Xmh0dIPrCWMPvNSMUeYJr14gYutS9slTUKz50GH9pwHK8IdsOsps8TuIGrIHeiiP
8D3fF+Tn1DHcj6yYWI/vHW8JX2RsVq9AlY3MybU7dk13uSyEPDEu8tkjlpBDn+P2
vvrepGynAm021otLLtfMx1DiuyUdhqt4aK9nc5YhjJkPY0PFjyEb3Jqv48DXKQFD
WKRthDIXSg==
=bQuC
-----END PGP SIGNATURE-----
Merge tag 'devicetree-fixes-for-4.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Rob writes:
"Devicetree fixes for 4.19, part 3:
- Fix DT unittest on Oldworld MAC systems"
* tag 'devicetree-fixes-for-4.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
of: unittest: Disable interrupt node tests for old world MAC systems
Moshe Shemesh says:
====================
devlink param type string fixes
This patchset fixes devlink param infrastructure for string param type.
The devlink param infrastructure doesn't handle copying the string data
correctly. The first two patches fix it and the third patch adds helper
function to safely copy string value without exceeding
DEVLINK_PARAM_MAX_STRING_VALUE.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>