For discard operation, we should return EINVAL if the given range length
is less than a block size, otherwise it will go through the file system
to discard data blocks as the end range might be evaluated to -1, e.g,
# fstrim -v -o 0 -l 100 /xfs7
/xfs7: 9811378176 bytes were trimmed
This issue can be triggered via xfstests/generic/288.
Also, it seems to get the request queue pointer via bdev_get_queue()
instead of the hard code pointer dereference is not a bad thing.
Signed-off-by: Jie Liu <jeff.liu@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
(cherry picked from commit f9fd013561)
Currently the xfs_inode.h header has a dependency on the definition
of the BMAP btree records as the inode fork includes an array of
xfs_bmbt_rec_host_t objects in it's definition.
Move all the btree format definitions from xfs_btree.h,
xfs_bmap_btree.h, xfs_alloc_btree.h and xfs_ialloc_btree.h to
xfs_format.h to continue the process of centralising the on-disk
format definitions. With this done, the xfs inode definitions are no
longer dependent on btree header files.
The enables a massive culling of unnecessary includes, with close to
200 #include directives removed from the XFS kernel code base.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
xfs_trans.h has a dependency on xfs_log.h for a couple of
structures. Most code that does transactions doesn't need to know
anything about the log, but this dependency means that they have to
include xfs_log.h. Decouple the xfs_trans.h and xfs_log.h header
files and clean up the includes to be in dependency order.
In doing this, remove the direct include of xfs_trans_reserve.h from
xfs_trans.h so that we remove the dependency between xfs_trans.h and
xfs_mount.h. Hence the xfs_trans.h include can be moved to the
indicate the actual dependencies other header files have on it.
Note that these are kernel only header files, so this does not
translate to any userspace changes at all.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
The transaction reservation size calculations is used by both kernel
and userspace, but most of the transaction code in xfs_trans.c is
kernel specific. Split all the transaction reservation code out into
it's own files to make sharing with userspace simpler. This just
leaves kernel-only definitions in xfs_trans.h, so it doesn't need to
be shared with userspace anymore, either.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
The on disk format definitions of the on-disk dquot, log formats and
quota off log formats are all intertwined with other definitions for
quotas. Separate them out into their own header file so they can
easily be shared with userspace.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
If range.start or range.minlen is bigger than filesystem size, return
invalid value error. This fixes possible overflow in BTOBB macro when
passed value was nearly ULLONG_MAX.
Signed-off-by: Tomas Racek <tracek@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Now that the busy extent tracking has been moved out of the
allocation files, clean up the namespace it uses to
"xfs_extent_busy" rather than a mix of "xfs_busy" and
"xfs_alloc_busy".
Signed-off-by: Dave Chinner<dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
To make it easier to handle userspace code merges, move all the busy
extent handling out of the allocation code and into it's own file.
The userspace code does not need the busy extent code, so this
simplifies the merging of the kernel code into the userspace
xfsprogs library.
Because the busy extent code has been almost completely rewritten
over the past couple of years, also update the copyright on this new
file to include the authors that made all those changes.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Untangle the header file includes a bit by moving the definition of
xfs_agino_t to xfs_types.h. This removes the dependency that xfs_ag.h has on
xfs_inum.h, meaning we don't need to include xfs_inum.h everywhere we include
xfs_ag.h.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
xfs_ioc_fstrim() doesn't treat the incoming offset and length
correctly. It treats them as a filesystem block address, rather than
a disk address. This is wrong because the range passed in is a
linear representation, while the filesystem block address notation
is a sparse representation. Hence we cannot convert the range direct
to filesystem block units and then use that for calculating the
range to trim.
While this sounds dangerous, the problem is limited to calculating
what AGs need to be trimmed. The code that calcuates the actual
ranges to trim gets the right result (i.e. only ever discards free
space), even though it uses the wrong ranges to limit what is
trimmed. Hence this is not a bug that endangers user data.
Fix this by treating the range as a disk address range and use the
appropriate functions to convert the range into the desired formats
for calculations.
Further, fix the first free extent lookup (the longest) to actually
find the largest free extent. Currently this lookup uses a <=
lookup, which results in finding the extent to the left of the
largest because we can never get an exact match on the largest
extent. This is due to the fact that while we know it's size, we
don't know it's location and so the exact match fails and we move
one record to the left to get the next largest extent. Instead, use
a >= search so that the lookup returns the largest extent regardless
of the fact we don't get an exact match on it.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
When finding the longest extent in an AG, we read the value directly
out of the AGF buffer without endian conversion. This will give an
incorrect length, resulting in FITRIM operations potentially not
trimming everything that it should.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
In xfs_ioc_trim it is possible that computing the last allocation group
to discard might overflow for big start & len values, because the result
might be bigger then xfs_agnumber_t which is 32 bit long. Fix this by not
allowing the start and end block of the range to be beyond the end of the
file system.
Note that if the start is beyond the end of the file system we have to
return -EINVAL, but in the "end" case we have to truncate it to the fs
size.
Also introduce "end" variable, rather than using start+len which which
might be more confusing to get right as this bug shows.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
Use the move from Linux 2.6 to Linux 3.x as an excuse to kill the
annoying subdirectories in the XFS source code. Besides the large
amount of file rename the only changes are to the Makefile, a few
files including headers with the subdirectory prefix, and the binary
sysctl compat code that includes a header under fs/xfs/ from
kernel/.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
