If an unused weak function was traced, it's call to fentry will still
exist, which gets added into the __mcount_loc table. Ftrace will use
kallsyms to retrieve the name for each location in __mcount_loc to display
it in the available_filter_functions and used to enable functions via the
name matching in set_ftrace_filter/notrace. Enabling these functions do
nothing but enable an unused call to ftrace_caller. If a traced weak
function is overridden, the symbol of the function would be used for it,
which will either created duplicate names, or if the previous function was
not traced, it would be incorrectly be listed in available_filter_functions
as a function that can be traced.
This became an issue with BPF[1] as there are tooling that enables the
direct callers via ftrace but then checks to see if the functions were
actually enabled. The case of one function that was marked notrace, but
was followed by an unused weak function that was traced. The unused
function's call to fentry was added to the __mcount_loc section, and
kallsyms retrieved the untraced function's symbol as the weak function was
overridden. Since the untraced function would not get traced, the BPF
check would detect this and fail.
The real fix would be to fix kallsyms to not show addresses of weak
functions as the function before it. But that would require adding code in
the build to add function size to kallsyms so that it can know when the
function ends instead of just using the start of the next known symbol.
In the mean time, this is a work around. Add a FTRACE_MCOUNT_MAX_OFFSET
macro that if defined, ftrace will ignore any function that has its call
to fentry/mcount that has an offset from the symbol that is greater than
FTRACE_MCOUNT_MAX_OFFSET.
If CONFIG_HAVE_FENTRY is defined for x86, define FTRACE_MCOUNT_MAX_OFFSET
to zero (unless IBT is enabled), which will have ftrace ignore all locations
that are not at the start of the function (or one after the ENDBR
instruction).
A worker thread is added at boot up to scan all the ftrace record entries,
and will mark any that fail the FTRACE_MCOUNT_MAX_OFFSET test as disabled.
They will still appear in the available_filter_functions file as:
__ftrace_invalid_address___<invalid-offset>
(showing the offset that caused it to be invalid).
This is required for tools that use libtracefs (like trace-cmd does) that
scan the available_filter_functions and enable set_ftrace_filter and
set_ftrace_notrace using indexes of the function listed in the file (this
is a speedup, as enabling thousands of files via names is an O(n^2)
operation and can take minutes to complete, where the indexing takes less
than a second).
The invalid functions cannot be removed from available_filter_functions as
the names there correspond to the ftrace records in the array that manages
them (and the indexing depends on this).
[1] https://lore.kernel.org/all/20220412094923.0abe90955e5db486b7bca279@kernel.org/
Link: https://lkml.kernel.org/r/20220526141912.794c2786@gandalf.local.home
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The parameter name in comments of event_trigger_separate_filter() is
inconsistent with actual parameter name, fix it.
Link: https://lkml.kernel.org/r/20220526072957.165655-1-sunliming@kylinos.cn
Signed-off-by: sunliming <sunliming@kylinos.cn>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The name in comments of parameter "filter_string" in function
create_filter is annotated as "filter_str", just fix it.
Link: https://lkml.kernel.org/r/20220524063937.52873-1-sunliming@kylinos.cn
Signed-off-by: sunliming <sunliming@kylinos.cn>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Functions in trace_preemptirq.c could be invoked from early interrupt
code that bypasses kcov trace function's in_task() check. Disable kcov
on this file to reduce random code coverage.
Link: https://lkml.kernel.org/r/20220523063033.1778974-1-liu3101@purdue.edu
Acked-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Congyu Liu <liu3101@purdue.edu>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Initialize the integer variable to 0 to fix the clang scan warning:
Undefined or garbage value returned to caller
[core.uninitialized.UndefReturn]
return ret;
Link: https://lkml.kernel.org/r/20220522061826.1751-1-gautammenghani201@gmail.com
Cc: stable@vger.kernel.org
Fixes: 8993665abc ("tracing/boot: Support multiple handlers for per-event histogram")
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Gautam Menghani <gautammenghani201@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
All instances of the function ftrace_arch_modify_prepare() and
ftrace_arch_modify_post_process() return zero. There's no point in
checking their return value. Just have them be void functions.
Link: https://lkml.kernel.org/r/20220518023639.4065-1-kunyu@nfschina.com
Signed-off-by: Li kunyu <kunyu@nfschina.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The "char []" string form declares a single variable. It is better
than "char *" which creates two variables in the final assembly.
Link: https://lkml.kernel.org/r/20220512143230.28796-1-liqiong@nfschina.com
Signed-off-by: liqiong <liqiong@nfschina.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
There is no need to wakeup the timerlat/ thread if stop tracing is hit
at the timerlat's IRQ handler.
Return before waking up timerlat's thread.
Link: https://lkml.kernel.org/r/b392356c91b56aedd2b289513cc56a84cf87e60d.1652175637.git.bristot@kernel.org
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Clark Williams <williams@redhat.com>
Cc: Ingo Molnar <mingo@redhat.com>
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
If print_stack and stop_tracing_us are set, and stop_tracing_us is hit
with latency higher than or equal to print_stack, print the
stack at the IRQ handler as it is useful to define the root cause for
the IRQ latency.
Link: https://lkml.kernel.org/r/fd04530ce98ae9270e41bb124ee5bf67b05ecfed.1652175637.git.bristot@kernel.org
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Clark Williams <williams@redhat.com>
Cc: Ingo Molnar <mingo@redhat.com>
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Currently, the notification of a new max latency is sent from
timerlat's IRQ handler anytime a new max latency is found.
While this behavior is not wrong, the send IPI overhead itself
will increase the thread latency and that is not the desired
effect (tracing overhead).
Moreover, the thread will notify a new max latency again because
the thread latency as it is always higher than the IRQ latency
that woke it up.
The only case in which it is helpful to notify a new max latency
from IRQ is when stop tracing (for the IRQ) is set, as in this
case, the thread will not be dispatched.
Notify a new max latency from the IRQ handler only if stop tracing is
set for the IRQ handler.
Link: https://lkml.kernel.org/r/2c2d9a56c0886c8402ba320de32856cbbb10c2bb.1652175637.git.bristot@kernel.org
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Ingo Molnar <mingo@redhat.com>
Reported-by: Clark Williams <williams@redhat.com>
Fixes: a955d7eac1 ("trace: Add timerlat tracer")
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Max Filippov reported:
When building kernel with CONFIG_KRETPROBES=n kernel/kprobes.c
compilation fails with the following messages:
kernel/kprobes.c: In function ‘recycle_rp_inst’:
kernel/kprobes.c:1273:32: error: implicit declaration of function
‘get_kretprobe’
kernel/kprobes.c: In function ‘kprobe_flush_task’:
kernel/kprobes.c:1299:35: error: ‘struct task_struct’ has no member
named ‘kretprobe_instances’
This came from the commit d741bf41d7 ("kprobes: Remove
kretprobe hash") which introduced get_kretprobe() and
kretprobe_instances member in task_struct when CONFIG_KRETPROBES=y,
but did not make recycle_rp_inst() and kprobe_flush_task()
depending on CONFIG_KRETPORBES.
Since those functions are only used for kretprobe, move those
functions into #ifdef CONFIG_KRETPROBE area.
Link: https://lkml.kernel.org/r/165163539094.74407.3838114721073251225.stgit@devnote2
Reported-by: Max Filippov <jcmvbkbc@gmail.com>
Fixes: d741bf41d7 ("kprobes: Remove kretprobe hash")
Cc: "Naveen N . Rao" <naveen.n.rao@linux.ibm.com>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: "David S . Miller" <davem@davemloft.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: stable@vger.kernel.org
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Tested-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Setting set_event_pid with trailing whitespace lead to endless write
system calls like below.
$ strace echo "123 " > /sys/kernel/debug/tracing/set_event_pid
execve("/usr/bin/echo", ["echo", "123 "], ...) = 0
...
write(1, "123 \n", 5) = 4
write(1, "\n", 1) = 0
write(1, "\n", 1) = 0
write(1, "\n", 1) = 0
write(1, "\n", 1) = 0
write(1, "\n", 1) = 0
....
This is because, the result of trace_get_user's are not returned when it
read at least one pid. To fix it, update read variable even if
parser->idx == 0.
The result of applied patch is below.
$ strace echo "123 " > /sys/kernel/debug/tracing/set_event_pid
execve("/usr/bin/echo", ["echo", "123 "], ...) = 0
...
write(1, "123 \n", 5) = 5
close(1) = 0
Link: https://lkml.kernel.org/r/20220503050546.288911-1-vvghjk1234@gmail.com
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Baik Song An <bsahn@etri.re.kr>
Cc: Hong Yeon Kim <kimhy@etri.re.kr>
Cc: Taeung Song <taeung@reallinux.co.kr>
Cc: linuxgeek@linuxgeek.io
Cc: stable@vger.kernel.org
Fixes: 4909010788 ("tracing: Add set_event_pid directory for future use")
Signed-off-by: Wonhyuk Yang <vvghjk1234@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
In create_var_ref(), init_var_ref() is called to initialize the fields
of variable ref_field, which is allocated in the previous function call
to create_hist_field(). Function init_var_ref() allocates the
corresponding fields such as ref_field->system, but frees these fields
when the function encounters an error. The caller later calls
destroy_hist_field() to conduct error handling, which frees the fields
and the variable itself. This results in double free of the fields which
are already freed in the previous function.
Fix this by storing NULL to the corresponding fields when they are freed
in init_var_ref().
Link: https://lkml.kernel.org/r/20220425063739.3859998-1-keitasuzuki.park@sslab.ics.keio.ac.jp
Fixes: 067fe038e7 ("tracing: Add variable reference handling to hist triggers")
CC: stable@vger.kernel.org
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Keita Suzuki <keitasuzuki.park@sslab.ics.keio.ac.jp>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The tracing_set_trace_write() function just removes the trailing whitespace
from the user supplied tracer name, but the leading whitespace should also
be removed.
In addition, if the user supplied tracer name contains only a few
whitespace characters, the first one will not be removed using the current
method, which results it a single whitespace character left in the buf.
To fix all of these issues, we use strim() to correctly remove both the
leading and trailing whitespace.
Link: https://lkml.kernel.org/r/20220121095623.1826679-1-ytcoode@gmail.com
Signed-off-by: Yuntao Wang <ytcoode@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The ftrace_process_locs() function may return -ENOMEM error code, which
should be handled by the callers.
Link: https://lkml.kernel.org/r/20220120065949.1813231-1-ytcoode@gmail.com
Signed-off-by: Yuntao Wang <ytcoode@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Creating tracefs entries with tracefs_create_file() followed by pr_warn()
is tedious and repetitive, we can use trace_create_file() to simplify
this process and make the code more readable.
Link: https://lkml.kernel.org/r/20220114131052.534382-1-ytcoode@gmail.com
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Yuntao Wang <ytcoode@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The direct trampoline and graph coexistence test sets global_ops to
trace only 'trace_selftest_dynamic_test_func', but does not reset it
after the test is completed, resulting in the function filter being set
already after the system starts. Although it can be reset through the
tracefs interface, it is more or less confusing to the user, and we
should reset it to trace all functions after the trampoline/graph test
completes.
Link: https://lkml.kernel.org/r/20220427034119.24668-1-lihuafei1@huawei.com
Link: https://lore.kernel.org/all/20220418073958.104029-1-lihuafei1@huawei.com/
Fixes: 130c080658 ("tracing: Add trampoline/graph selftest")
Signed-off-by: Li Huafei <lihuafei1@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The print fmt check against trace events to make sure that the format does
not use pointers that may be freed from the time of the trace to the time
the event is read, gives a false positive on %pISpc when reading data that
was saved in __get_dynamic_array() when it is perfectly fine to do so, as
the data being read is on the ring buffer.
Link: https://lore.kernel.org/all/20220407144524.2a592ed6@canb.auug.org.au/
Cc: stable@vger.kernel.org
Fixes: 5013f454a3 ("tracing: Add check of trace event print fmts for dereferencing pointers")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
When list_for_each_entry() completes the iteration over the whole list
without breaking the loop, the iterator value will be a bogus pointer
computed based on the head element.
While it is safe to use the pointer to determine if it was computed
based on the head element, either with list_entry_is_head() or
&pos->member == head, using the iterator variable after the loop should
be avoided.
In preparation to limit the scope of a list iterator to the list
traversal loop, use a dedicated pointer to point to the found element [1].
Link: https://lkml.kernel.org/r/20220427170734.819891-5-jakobkoschel@gmail.com
Cc: Ingo Molnar <mingo@redhat.com>
Link: https://lore.kernel.org/all/CAHk-=wgRr_D8CB-D9Kg-c=EHreAsk5SqXPwr9Y7k9sA6cWXJ6w@mail.gmail.com/
Signed-off-by: Jakob Koschel <jakobkoschel@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
To move the list iterator variable into the list_for_each_entry_*()
macro in the future it should be avoided to use the list iterator
variable after the loop body.
To *never* use the list iterator variable after the loop it was
concluded to use a separate iterator variable instead of a
found boolean [1].
This removes the need to use a found variable and simply checking if
the variable was set, can determine if the break/goto was hit.
Link: https://lkml.kernel.org/r/20220427170734.819891-4-jakobkoschel@gmail.com
Cc: Ingo Molnar <mingo@redhat.com>
Link: https://lore.kernel.org/all/CAHk-=wgRr_D8CB-D9Kg-c=EHreAsk5SqXPwr9Y7k9sA6cWXJ6w@mail.gmail.com/ [1]
Signed-off-by: Jakob Koschel <jakobkoschel@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
In preparation to limit the scope of the list iterator variable to the
traversal loop, use a dedicated pointer to point to the found element
[1].
Before, the code implicitly used the head when no element was found
when using &pos->list. Since the new variable is only set if an
element was found, the head needs to be used explicitly if the
variable is NULL.
Link: https://lkml.kernel.org/r/20220427170734.819891-2-jakobkoschel@gmail.com
Cc: Ingo Molnar <mingo@redhat.com>
Link: https://lore.kernel.org/all/CAHk-=wgRr_D8CB-D9Kg-c=EHreAsk5SqXPwr9Y7k9sA6cWXJ6w@mail.gmail.com/ [1]
Signed-off-by: Jakob Koschel <jakobkoschel@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
A fast/NMI safe accessor for CLOCK_TAI has been introduced.
Use it for adding the additional trace clock "tai".
Link: https://lkml.kernel.org/r/20220414091805.89667-3-kurt@linutronix.de
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
When the new logic was made to handle deltas of events from interrupts
that interrupted other events, it required 64 bit local atomics.
Unfortunately, 64 bit local atomics are expensive on 32 bit architectures.
Thus, commit 10464b4aa6 ("ring-buffer: Add rb_time_t 64 bit operations
for speeding up 32 bit") created a type of seq lock timer for 32 bits.
It used two 32 bit local atomics, but required 2 bits from them each for
synchronization, making it only 60 bits.
Add a new "msb" field to hold the extra 4 bits that are cut off.
Link: https://lore.kernel.org/all/20220426175338.3807ca4f@gandalf.local.home/
Link: https://lkml.kernel.org/r/20220427170812.53cc7139@gandalf.local.home
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
There's an absolute timestamp event in the ring buffer, but this only
saves 59 bits of the timestamp, as the 5 MSB is used for meta data
(stating it is an absolute time stamp). This was never an issue as all the
clocks currently in use never used those 5 MSB. But now there's a new
clock (TAI) that does.
To handle this case, when reading an absolute timestamp, a previous full
timestamp is passed in, and the 5 MSB of that timestamp is OR'd to the
absolute timestamp (if any of the 5 MSB are set), and then to test for
overflow, if the new result is smaller than the passed in previous
timestamp, then 1 << 59 is added to it.
All the extra processing is done on the reader "slow" path, with the
exception of the "too big delta" check, and the reading of timestamps
for histograms.
Note, libtraceevent will need to be updated to handle this case as well.
But this is not a user space regression, as user space was never able to
handle any timestamps that used more than 59 bits.
Link: https://lore.kernel.org/all/20220426175338.3807ca4f@gandalf.local.home/
Link: https://lkml.kernel.org/r/20220427153339.16c33f75@gandalf.local.home
Cc: Tom Zanussi <zanussi@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Move trace_eval_init() to subsys_initcall to make it start
earlier.
And to avoid tracer_init_tracefs being blocked by
trace_event_sem which trace_eval_init() hold [1],
queue tracer_init_tracefs() to eval_map_wq to let
the two works being executed sequentially.
It can speed up the initialization of kernel as result
of making tracer_init_tracefs asynchronous.
On my arm64 platform, it reduce ~20ms of 125ms which total
time do_initcalls spend.
Link: https://lkml.kernel.org/r/20220426122407.17042-3-mark-pk.tsai@mediatek.com
[1]: https://lore.kernel.org/r/68d7b3327052757d0cd6359a6c9015a85b437232.camel@pengutronix.de
Signed-off-by: Mark-PK Tsai <mark-pk.tsai@mediatek.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
To prepare for support asynchronous tracer_init_tracefs initcall,
avoid calling create_trace_option_files before __update_tracer_options.
Otherwise, create_trace_option_files will show warning because
some tracers in trace_types list are already in tr->topts.
For example, hwlat_tracer call register_tracer in late_initcall,
and global_trace.dir is already created in tracing_init_dentry,
hwlat_tracer will be put into tr->topts.
Then if the __update_tracer_options is executed after hwlat_tracer
registered, create_trace_option_files find that hwlat_tracer is
already in tr->topts.
Link: https://lkml.kernel.org/r/20220426122407.17042-2-mark-pk.tsai@mediatek.com
Link: https://lore.kernel.org/lkml/20220322133339.GA32582@xsang-OptiPlex-9020/
Reported-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: Mark-PK Tsai <mark-pk.tsai@mediatek.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
When setting bootparams="trace_event=initcall:initcall_start tp_printk=1" in the
cmdline, the output_printk() was called, and the spin_lock_irqsave() was called in the
atomic and irq disable interrupt context suitation. On the PREEMPT_RT kernel,
these locks are replaced with sleepable rt-spinlock, so the stack calltrace will
be triggered.
Fix it by raw_spin_lock_irqsave when PREEMPT_RT and "trace_event=initcall:initcall_start
tp_printk=1" enabled.
BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:46
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 1, name: swapper/0
preempt_count: 2, expected: 0
RCU nest depth: 0, expected: 0
Preemption disabled at:
[<ffffffff8992303e>] try_to_wake_up+0x7e/0xba0
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.17.1-rt17+ #19 34c5812404187a875f32bee7977f7367f9679ea7
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x60/0x8c
dump_stack+0x10/0x12
__might_resched.cold+0x11d/0x155
rt_spin_lock+0x40/0x70
trace_event_buffer_commit+0x2fa/0x4c0
? map_vsyscall+0x93/0x93
trace_event_raw_event_initcall_start+0xbe/0x110
? perf_trace_initcall_finish+0x210/0x210
? probe_sched_wakeup+0x34/0x40
? ttwu_do_wakeup+0xda/0x310
? trace_hardirqs_on+0x35/0x170
? map_vsyscall+0x93/0x93
do_one_initcall+0x217/0x3c0
? trace_event_raw_event_initcall_level+0x170/0x170
? push_cpu_stop+0x400/0x400
? cblist_init_generic+0x241/0x290
kernel_init_freeable+0x1ac/0x347
? _raw_spin_unlock_irq+0x65/0x80
? rest_init+0xf0/0xf0
kernel_init+0x1e/0x150
ret_from_fork+0x22/0x30
</TASK>
Link: https://lkml.kernel.org/r/20220419013910.894370-1-jun.miao@intel.com
Signed-off-by: Jun Miao <jun.miao@intel.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
No need to traverse to the end of string. If the first byte is not a NUL
char, it's guaranteed `if (strlen(glob))` is true.
Link: https://lkml.kernel.org/r/20220417185630.199062-3-ammarfaizi2@gnuweeb.org
Cc: Ingo Molnar <mingo@redhat.com>
Cc: GNU/Weeb Mailing List <gwml@vger.gnuweeb.org>
Signed-off-by: Ammar Faizi <ammarfaizi2@gnuweeb.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
If `WARN_ON(!glob)` is ever triggered, we will still continue executing
the next lines. This will trigger the more serious problem, a NULL
pointer dereference bug.
Just return -EINVAL if @glob is NULL.
Link: https://lkml.kernel.org/r/20220417185630.199062-2-ammarfaizi2@gnuweeb.org
Cc: Ingo Molnar <mingo@redhat.com>
Cc: GNU/Weeb Mailing List <gwml@vger.gnuweeb.org>
Signed-off-by: Ammar Faizi <ammarfaizi2@gnuweeb.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Currently the tp_printk option has no effect on syscall tracepoint.
When adding the kernel option parameter tp_printk, then:
echo 1 > /sys/kernel/debug/tracing/events/syscalls/enable
When running any application, no trace information is printed on the
terminal.
Now added printk for syscall tracepoints.
Link: https://lkml.kernel.org/r/20220410145025.681144-1-xiehuan09@gmail.com
Signed-off-by: Jeff Xie <xiehuan09@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Add the description of @n_sort_keys and make @sort_key ->
@sort_keys in tracing_map_sort_entries() kernel-doc comment
to remove warnings found by running scripts/kernel-doc, which
is caused by using 'make W=1'.
kernel/trace/tracing_map.c:1073: warning: Function parameter or member
'sort_keys' not described in 'tracing_map_sort_entries'
kernel/trace/tracing_map.c:1073: warning: Function parameter or member
'n_sort_keys' not described in 'tracing_map_sort_entries'
kernel/trace/tracing_map.c:1073: warning: Excess function parameter
'sort_key' description in 'tracing_map_sort_entries'
Link: https://lkml.kernel.org/r/20220402072015.45864-1-yang.lee@linux.alibaba.com
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
hist_register_trigger() handles both new hist registration as well as
existing hist registration through event_command.reg().
Adding a new function, existing_hist_update_only(), that checks and
updates existing histograms and exits after doing so allows the
confusing logic in event_hist_trigger_parse() to be simplified.
Link: https://lkml.kernel.org/r/211b2cd3e3d7e00f4f8ad45ef8b33063da6a7e05.1644010576.git.zanussi@kernel.org
Signed-off-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Since event_trigger_data contains the .ops trigger_ops field, there's
no reason to pass the trigger_ops separately. Remove it as a param
from functions whenever event_trigger_data is passed.
Link: https://lkml.kernel.org/r/9856c9bc81bde57077f5b8d6f8faa47156c6354a.1644010575.git.zanussi@kernel.org
Signed-off-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Code for registering triggers assumes it's possible to register more
than one trigger at a time. In fact, it's unimplemented and there
doesn't seem to be a reason to do that.
Remove the n_registered param from event_trigger_register() and fix up
callers.
Doing so simplifies the logic in event_trigger_register to the point
that it just becomes a wrapper calling event_command.reg().
It also removes the problematic call to event_command.unreg() in case
of failure. A new function, event_trigger_unregister() is also added
for callers to call themselves.
The changes to trace_events_hist.c simply allow compilation; a
separate patch follows which updates the hist triggers to work
correctly with the new changes.
Link: https://lkml.kernel.org/r/6149fec7a139d93e84fa4535672fb5bef88006b0.1644010575.git.zanussi@kernel.org
Signed-off-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Introduce fast/NMI safe accessor to clock tai for tracing. The Linux kernel
tracing infrastructure has support for using different clocks to generate
timestamps for trace events. Especially in TSN networks it's useful to have TAI
as trace clock, because the application scheduling is done in accordance to the
network time, which is based on TAI. With a tai trace_clock in place, it becomes
very convenient to correlate network activity with Linux kernel application
traces.
Use the same implementation as ktime_get_boot_fast_ns() does by reading the
monotonic time and adding the TAI offset. The same limitations as for the fast
boot implementation apply. The TAI offset may change at run time e.g., by
setting the time or using adjtimex() with an offset. However, these kind of
offset changes are rare events. Nevertheless, the user has to be aware and deal
with it in post processing.
An alternative approach would be to use the same implementation as
ktime_get_real_fast_ns() does. However, this requires to add an additional u64
member to the tk_read_base struct. This struct together with a seqcount is
designed to fit into a single cache line on 64 bit architectures. Adding a new
member would violate this constraint.
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: https://lore.kernel.org/r/20220414091805.89667-2-kurt@linutronix.de
- A couple of fixes to event encoding on Sapphire Rapids
- Pass event caps of inherited events so that perf doesn't fail wrongly at fork()
- Add support for a new Raptor Lake CPU
-----BEGIN PGP SIGNATURE-----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=ba3V
-----END PGP SIGNATURE-----
Merge tag 'perf_urgent_for_v5.18_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Borislav Petkov:
- A couple of fixes to cgroup-related handling of perf events
- A couple of fixes to event encoding on Sapphire Rapids
- Pass event caps of inherited events so that perf doesn't fail wrongly
at fork()
- Add support for a new Raptor Lake CPU
* tag 'perf_urgent_for_v5.18_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/core: Always set cpuctx cgrp when enable cgroup event
perf/core: Fix perf_cgroup_switch()
perf/core: Use perf_cgroup_info->active to check if cgroup is active
perf/core: Don't pass task around when ctx sched in
perf/x86/intel: Update the FRONTEND MSR mask on Sapphire Rapids
perf/x86/intel: Don't extend the pseudo-encoding to GP counters
perf/core: Inherit event_caps
perf/x86/uncore: Add Raptor Lake uncore support
perf/x86/msr: Add Raptor Lake CPU support
perf/x86/cstate: Add Raptor Lake support
perf/x86: Add Intel Raptor Lake support
the local_lock_* macros back to inline functions
- A couple of fixes to static call insn patching
-----BEGIN PGP SIGNATURE-----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=hSOc
-----END PGP SIGNATURE-----
Merge tag 'locking_urgent_for_v5.18_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fixes from Borislav Petkov:
- Allow the compiler to optimize away unused percpu accesses and change
the local_lock_* macros back to inline functions
- A couple of fixes to static call insn patching
* tag 'locking_urgent_for_v5.18_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Revert "mm/page_alloc: mark pagesets as __maybe_unused"
Revert "locking/local_lock: Make the empty local_lock_*() function a macro."
x86/percpu: Remove volatile from arch_raw_cpu_ptr().
static_call: Remove __DEFINE_STATIC_CALL macro
static_call: Properly initialise DEFINE_STATIC_CALL_RET0()
static_call: Don't make __static_call_return0 static
x86,static_call: Fix __static_call_return0 for i386
- Two fixes for the new forceidle balancer
-----BEGIN PGP SIGNATURE-----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=elMK
-----END PGP SIGNATURE-----
Merge tag 'sched_urgent_for_v5.18_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Borislav Petkov:
- Use the correct static key checking primitive on the IRQ exit path
- Two fixes for the new forceidle balancer
* tag 'sched_urgent_for_v5.18_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
entry: Fix compile error in dynamic_irqentry_exit_cond_resched()
sched: Teach the forced-newidle balancer about CPU affinity limitation.
sched/core: Fix forceidle balancing
Alexei Starovoitov says:
====================
pull-request: bpf 2022-04-06
We've added 8 non-merge commits during the last 8 day(s) which contain
a total of 9 files changed, 139 insertions(+), 36 deletions(-).
The main changes are:
1) rethook related fixes, from Jiri and Masami.
2) Fix the case when tracing bpf prog is attached to struct_ops, from Martin.
3) Support dual-stack sockets in bpf_tcp_check_syncookie, from Maxim.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf: Adjust bpf_tcp_check_syncookie selftest to test dual-stack sockets
bpf: Support dual-stack sockets in bpf_tcp_check_syncookie
bpf: selftests: Test fentry tracing a struct_ops program
bpf: Resolve to prog->aux->dst_prog->type only for BPF_PROG_TYPE_EXT
rethook: Fix to use WRITE_ONCE() for rethook:: Handler
selftests/bpf: Fix warning comparing pointer to 0
bpf: Fix sparse warnings in kprobe_multi_resolve_syms
bpftool: Explicit errno handling in skeletons
====================
Link: https://lore.kernel.org/r/20220407031245.73026-1-alexei.starovoitov@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
