XFS has had scattered reports of delalloc blocks present at
->releasepage() time. This results in a warning with a stack trace
similar to the following:
...
Call Trace:
[<ffffffffa23c5b8f>] dump_stack+0x63/0x84
[<ffffffffa20837a7>] warn_slowpath_common+0x97/0xe0
[<ffffffffa208380a>] warn_slowpath_null+0x1a/0x20
[<ffffffffa2326caf>] xfs_vm_releasepage+0x10f/0x140
[<ffffffffa218c680>] ? page_mkclean_one+0xd0/0xd0
[<ffffffffa218d3a0>] ? anon_vma_prepare+0x150/0x150
[<ffffffffa21521c2>] try_to_release_page+0x32/0x50
[<ffffffffa2166b2e>] shrink_active_list+0x3ce/0x3e0
[<ffffffffa21671c7>] shrink_lruvec+0x687/0x7d0
[<ffffffffa21673ec>] shrink_zone+0xdc/0x2c0
[<ffffffffa2168539>] kswapd+0x4f9/0x970
[<ffffffffa2168040>] ? mem_cgroup_shrink_node_zone+0x1a0/0x1a0
[<ffffffffa20a0d99>] kthread+0xc9/0xe0
[<ffffffffa20a0cd0>] ? kthread_stop+0x100/0x100
[<ffffffffa26b404f>] ret_from_fork+0x3f/0x70
[<ffffffffa20a0cd0>] ? kthread_stop+0x100/0x100
This occurs because it is possible for shrink_active_list() to send
pages marked dirty to ->releasepage() when certain buffer_head threshold
conditions are met. shrink_active_list() doesn't check the page dirty
state apparently to handle an old ext3 corner case where in some cases
clean pages would not have the dirty bit cleared, thus it is up to the
filesystem to determine how to handle the page.
XFS currently handles the delalloc case properly, but this behavior
makes the warning spurious. Update the XFS ->releasepage() handler to
explicitly skip dirty pages. Retain the existing delalloc/unwritten
checks so we continue to warn if such buffers exist on clean pages when
they shouldn't.
Diagnosed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Before this patch, if you used gfs2_jadd to add new journals of a
size smaller than the existing journals, replaying those new journals
would withdraw. That's because function gfs2_replay_incr_blk was
using the number of journal blocks (jd_block) from the superblock's
journal pointer. In other words, "My journal's max size" rather than
"the journal we're replaying's size." This patch changes the function
to use the size of the pertinent journal rather than always using the
journal we happen to be using.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
All write callbacks are required to call nfs_writeback_update_inode() upon
success to ensure that file size changes are recorded, and the attribute
cache is invalidated.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Commit 56244ef151 was almost but not quite enough to fix the
reservation math after btrfs_copy_from_user returned partial copies.
Some users are still seeing warnings in btrfs_destroy_inode, and with a
long enough test run I'm able to trigger them as well.
This patch fixes the accounting math again, bringing it much closer to
the way it was before the sectorsize conversion Chandan did. The
problem is accounting for the offset into the page/sector when we do a
partial copy. This one just uses the dirty_sectors variable which
should already be updated properly.
Signed-off-by: Chris Mason <clm@fb.com>
cc: stable@vger.kernel.org # v4.6+
Currently, presence of direct_access() in block_device_operations
indicates support of DAX on its block device. Because
block_device_operations is instantiated with 'const', this DAX
capablity may not be enabled conditinally.
In preparation for supporting DAX to device-mapper devices, add
QUEUE_FLAG_DAX to request_queue flags to advertise their DAX
support. This will allow to set the DAX capability based on how
mapped device is composed.
Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: <linux-s390@vger.kernel.org>
Signed-off-by: Jens Axboe <axboe@fb.com>
The new enospc code makes it possible to deadlock if we don't use
FLUSH_LIMIT during reservations inside a transaction. This enforces
the correct flush type to avoid both deadlocks and assertions
Signed-off-by: Chris Mason <clm@fb.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
These two are confusing leftover of the old world order, combining
values of the REQ_OP_ and REQ_ namespaces. For callers that don't
special case we mostly just replace bi_rw with bio_data_dir or
op_is_write, except for the few cases where a switch over the REQ_OP_
values makes more sense. Any check for READA is replaced with an
explicit check for REQ_RAHEAD. Also remove the READA alias for
REQ_RAHEAD.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
It's enough to show BUG or WARN by f2fs_bug_on for error case.
Then, we don't need to remain corrupted filesystem.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
When fs utilization is almost full, f2fs_sync_file should do checkpoint if
there is not enough space for roll-forward later. (i.e. space_for_roll_forward)
So, currently we have no lock for sbi->alloc_valid_block_count, resulting in
race condition.
In rare case, we can get -ENOSPC when doing roll-forward which triggers
if (is_valid_blkaddr(sbi, dest, META_POR)) {
if (src == NULL_ADDR) {
err = reserve_new_block(&dn);
f2fs_bug_on(sbi, err);
...
}
...
}
in do_recover_data.
So, this patch avoids that situation in advance.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch fixes to report the right error number of f2fs_find_entry to
its caller.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
The secmech hmac(md5) structures are present in the TCP_Server_Info
struct and can be shared among multiple CIFS sessions. However, the
server mutex is not currently held when these structures are allocated
and used, which can lead to a kernel crashes, as in the scenario below:
mount.cifs(8) #1 mount.cifs(8) #2
Is secmech.sdeschmaccmd5 allocated?
// false
Is secmech.sdeschmaccmd5 allocated?
// false
secmech.hmacmd = crypto_alloc_shash..
secmech.sdeschmaccmd5 = kzalloc..
sdeschmaccmd5->shash.tfm = &secmec.hmacmd;
secmech.sdeschmaccmd5 = kzalloc
// sdeschmaccmd5->shash.tfm
// not yet assigned
crypto_shash_update()
deref NULL sdeschmaccmd5->shash.tfm
Unable to handle kernel paging request at virtual address 00000030
epc : 8027ba34 crypto_shash_update+0x38/0x158
ra : 8020f2e8 setup_ntlmv2_rsp+0x4bc/0xa84
Call Trace:
crypto_shash_update+0x38/0x158
setup_ntlmv2_rsp+0x4bc/0xa84
build_ntlmssp_auth_blob+0xbc/0x34c
sess_auth_rawntlmssp_authenticate+0xac/0x248
CIFS_SessSetup+0xf0/0x178
cifs_setup_session+0x4c/0x84
cifs_get_smb_ses+0x2c8/0x314
cifs_mount+0x38c/0x76c
cifs_do_mount+0x98/0x440
mount_fs+0x20/0xc0
vfs_kern_mount+0x58/0x138
do_mount+0x1e8/0xccc
SyS_mount+0x88/0xd4
syscall_common+0x30/0x54
Fix this by locking the srv_mutex around the code which uses these
hmac(md5) structures. All the other secmech algos already have similar
locking.
Fixes: 95dc8dd14e ("Limit allocation of crypto mechanisms to dialect which requires")
Signed-off-by: Rabin Vincent <rabinv@axis.com>
Acked-by: Sachin Prabhu <sprabhu@redhat.com>
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Steve French <smfrench@gmail.com>
Instead we always declare struct xfs_dir2_sf_hdr as packed. That's
the expected layout, and while most major architectures do the packing
by default the new structure size and offset checker showed that not
only the ARM old ABI got this wrong, but various minor embedded
architectures did as well.
[Verified that no code change on x86-64 results from this change]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
And use an array of unsigned char values directly to avoid problems
with architectures that pad the size of structures. This also gets
rid of the xfs_dir2_ino4_t and xfs_dir2_ino8_t types, and introduces
new constants for the size of 4 and 8 bytes as well as the size
difference between the two.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Just use an array of two unsigned chars directly to avoid problems
with architectures that pad the size of structures.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
So far the DAX code overloaded the direct I/O code path. There is very little
in common between the two, and untangling them allows to clean up both variants.
As a side effect we also get separate trace points for both I/O types.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
We control both the callers and callees of ->direct_IO, so remove the
indirect calls.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
XFS already implement it's own flushing of the pagecache because it
implements proper synchronization for direct I/O reads. This means
calling generic_file_read_iter for direct I/O is rather useless,
as it doesn't do much but updating the atime and iocb position for
us. This also gets rid of the buffered I/O fallback that isn't used
for XFS.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Similar to what we did on the write side a while ago.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
All the three low-level read implementations that we might call already
take care of not overflowing the maximum supported bytes, no need to
duplicate it here.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Now that we have the direct I/O kiocb flag there is no real need to sample
the value inside of XFS, and the invis flag was always just partially used
and isn't worth keeping this infrastructure around for. This also splits
the read tracepoint into buffered vs direct as we've done for writes a long
time ago.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Instead check the file pointer for the invisble I/O flag directly, and
use the chance to drop redundant arguments from the xfs_ioc_space
prototype.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Newly allocated XFS metadata buffers are added to the LRU once the hold
count is released, which typically occurs after I/O completion. There is
no other mechanism at current that tracks the existence or I/O state of
a new buffer. Further, readahead I/O tends to be submitted
asynchronously by nature, which means the I/O can remain in flight and
actually complete long after the calling context is gone. This means
that file descriptors or any other holds on the filesystem can be
released, allowing the filesystem to be unmounted while I/O is still in
flight. When I/O completion occurs, core data structures may have been
freed, causing completion to run into invalid memory accesses and likely
to panic.
This problem is reproduced on XFS via directory readahead. A filesystem
is mounted, a directory is opened/closed and the filesystem immediately
unmounted. The open/close cycle triggers a directory readahead that if
delayed long enough, runs buffer I/O completion after the unmount has
completed.
To address this problem, add a mechanism to track all in-flight,
asynchronous buffers using per-cpu counters in the buftarg. The buffer
is accounted on the first I/O submission after the current reference is
acquired and unaccounted once the buffer is returned to the LRU or
freed. Update xfs_wait_buftarg() to wait on all in-flight I/O before
walking the LRU list. Once in-flight I/O has completed and the workqueue
has drained, all new buffers should have been released onto the LRU.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
The upcoming buftarg I/O accounting mechanism maintains a count of
all buffers that have undergone I/O in the current hold-release
cycle. Certain buffers associated with core infrastructure (e.g.,
the xfs_mount superblock buffer, log buffers) are never released,
however. This means that accounting I/O submission on such buffers
elevates the buftarg count indefinitely and could lead to lockup on
unmount.
Define a new buffer flag to explicitly exclude buffers from buftarg
I/O accounting. Set the flag on the superblock and associated log
buffers.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
With the code as it stands today, b_retries never increments because
it gets reset to 0 in the error callback.
Remove that, and fix a similar problem where the first retry time
was constantly being overwritten, which defeated the timeout tunable
as well. We now only set first retry time if a non-zero timeout is
set, to match the behavior of only incrementing retries if a retry
value is set.
This way max retries & timeouts consistently take effect after a
tunable is set, rather than acting retroactively on a buffer which
has failed at some point in the past and has accumulated state from
those prior failures.
Thanks to dchinner for talking through this with me.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Fix up a couple places where extra flag manipulation occurs.
In the first case we clear XBF_ASYNC and then immediately reset it -
so don't bother clearing in the first place.
In the 2nd case we are at a point in the function where the buffer
must already be async, so there is no need to reset it.
Add consistent spacing around the " | " while we're at it.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
xfs_error_get_cfg() is called with bp->b_error as an arg, which is
negative, so the switch statement won't ever find any matches.
This results in only the default error handler having any effect, as
EIO/ENOSPC/ENODEV get ignored due to the wrong sign.
It seems simplest to always flip the error sign to positive, so that
we can handle either negative errors in bp->b_error, or possibly a
positive errno via something like xfs_error_get_cfg(EIO) - this
future-proofs the function.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
replace the magic numbers by offsetof(...) and sizeof(...), and add two
extra checks on xfs_check_ondisk_structs()
[dchinner: renamed header structures to be more descriptive]
Signed-off-by: Hou Tao <houtao1@huawei.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
The indentation in this function is different from the other functions.
Those spacebars are converted to tabs to improve readability.
Signed-off-by: Kaho Ng <ngkaho1234@gmail.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Errors go from zero which means no error to XFS_ERRTAG_MAX (22). My
static checker complains that xfs_errortag_add() puts an upper bound on
this but not a lower bound. Let's fix it by making it unsigned.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
When calling fdget() in xfs_ioc_swapext(), we need to verify that
the file descriptors passed into the ioctl point to XFS inodes
before we start operations on them. If we don't do this, we could be
referencing arbitrary kernel memory as an XFS inode. THis could lead
to memory corruption and/or performing locking operations on
attacker-chosen structures in kernel memory.
[dchinner: rewrite commit message ]
[dchinner: add comment explaining new check ]
Signed-off-by: Jann Horn <jann@thejh.net>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
The last put of deviceid nodes for SCSI layouts may sleep, so we shouldn't
hold any spinlocks. Make sure we put them outside the bl_ext_lock.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
A generic_cred can be used to look up a unx_cred or a gss_cred, so it's
not really safe to use the the generic_cred->acred->ac_flags to store
the NO_CRKEY_TIMEOUT flag. A lookup for a unx_cred triggered while the
KEY_EXPIRE_SOON flag is already set will cause both NO_CRKEY_TIMEOUT and
KEY_EXPIRE_SOON to be set in the ac_flags, leaving the user associated
with the auth_cred to be in a state where they're perpetually doing 4K
NFS_FILE_SYNC writes.
This can be reproduced as follows:
1. Mount two NFS filesystems, one with sec=krb5 and one with sec=sys.
They do not need to be the same export, nor do they even need to be from
the same NFS server. Also, v3 is fine.
$ sudo mount -o v3,sec=krb5 server1:/export /mnt/krb5
$ sudo mount -o v3,sec=sys server2:/export /mnt/sys
2. As the normal user, before accessing the kerberized mount, kinit with
a short lifetime (but not so short that renewing the ticket would leave
you within the 4-minute window again by the time the original ticket
expires), e.g.
$ kinit -l 10m -r 60m
3. Do some I/O to the kerberized mount and verify that the writes are
wsize, UNSTABLE:
$ dd if=/dev/zero of=/mnt/krb5/file bs=1M count=1
4. Wait until you're within 4 minutes of key expiry, then do some more
I/O to the kerberized mount to ensure that RPC_CRED_KEY_EXPIRE_SOON gets
set. Verify that the writes are 4K, FILE_SYNC:
$ dd if=/dev/zero of=/mnt/krb5/file bs=1M count=1
5. Now do some I/O to the sec=sys mount. This will cause
RPC_CRED_NO_CRKEY_TIMEOUT to be set:
$ dd if=/dev/zero of=/mnt/sys/file bs=1M count=1
6. Writes for that user will now be permanently 4K, FILE_SYNC for that
user, regardless of which mount is being written to, until you reboot
the client. Renewing the kerberos ticket (assuming it hasn't already
expired) will have no effect. Grabbing a new kerberos ticket at this
point will have no effect either.
Move the flag to the auth->au_flags field (which is currently unused)
and rename it slightly to reflect that it's no longer associated with
the auth_cred->ac_flags. Add the rpc_auth to the arg list of
rpcauth_cred_key_to_expire and check the au_flags there too. Finally,
add the inode to the arg list of nfs_ctx_key_to_expire so we can
determine the rpc_auth to pass to rpcauth_cred_key_to_expire.
Signed-off-by: Scott Mayhew <smayhew@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
When older servers return RPC_AUTH_NULL, it means the
rpc creds will be ignored. In that case use the sec=
that was specified instead of setting sec=null
Fixes Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1112983
Signed-off-by: Steve Dickson <steved@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
We want to recover the open stateid if there is no layout stateid
and/or the stateid argument matches an open stateid.
Otherwise throw out the existing layout and recover from scratch, as
the layout stateid is bad.
Fixes: 183d9e7b11 ("pnfs: rework LAYOUTGET retry handling")
Cc: stable@vger.kernel.org # 4.7
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Instead of giving up altogether and falling back to doing I/O
through the MDS, which may make the situation worse, wait for
2 lease periods for the callback to resolve itself, and then
try destroying the existing layout.
Only if this was an attempt at getting a first layout, do we
give up altogether, as the server is clearly crazy.
Fixes: 183d9e7b11 ("pnfs: rework LAYOUTGET retry handling")
Cc: stable@vger.kernel.org # 4.7
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
They are not the same error, and need to be handled differently.
Fixes: 183d9e7b11 ("pnfs: rework LAYOUTGET retry handling")
Cc: stable@vger.kernel.org # 4.7
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
The non-retry error path is currently broken and ends up releasing the
reference to the layout twice. It also can end up clearing the
NFS_LAYOUT_FIRST_LAYOUTGET flag twice, causing a race.
In addition, the retry path will fail to decrement the plh_outstanding
counter.
Fixes: 183d9e7b11 ("pnfs: rework LAYOUTGET retry handling")
Cc: stable@vger.kernel.org # 4.7
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
adfeb3e0 ("cifs: Make echo interval tunable") added a comparison of
vol->echo_interval to server->echo_interval as a criterium to
match_server(), but:
(1) A default value is set for server->echo_interval but not for
vol->echo_interval, meaning these can never match if the echo_interval
option is not specified.
(2) vol->echo_interval is in seconds but server->echo_interval is in
jiffies, meaning these can never match even if the echo_interval option
is specified.
This broke TCP session reuse since match_server() can never return 1.
Fix it.
Fixes: adfeb3e0 ("cifs: Make echo interval tunable")
Signed-off-by: Rabin Vincent <rabinv@axis.com>
Acked-by: Sachin Prabhu <sprabhu@redhat.com>
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Steve French <smfrench@gmail.com>
Since 2006 we have ->i_bdev pinning bdev in question, so there's no
way to get to bdev ->evict_inode() while there's an aliasing inode
anywhere. In other words, the only place walking the list of aliases
is guaranteed to do it only when the list is empty...
Remove the detritus; it should've been done in "[PATCH] Fix a race
condition between ->i_mapping and iput()", but nobody had noticed it
back then.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Add missing comparison to op in expression, which was forgotten when doing
the REQ_OP transition.
Fixes: b3d3fa5199 ("btrfs: update __btrfs_map_block for REQ_OP transition")
Signed-off-by: Vincent Stehlé <vincent.stehle@intel.com>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
We know that the attributes will need updating if there is still a
LAYOUTCOMMIT outstanding.
Reported-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
The default value of idle interval is 2 mins, but for most time when
screen shutdown, there are still operations during the 2 mins interval,
and gc's sleep time is about 30 secs to 60 secs, so there is almost no
chance for GC thread to do garbage collecting.
Set default value of idle interval value from 2 mins to 5 secs for
fixing.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch reverts 19a5f5e2ef (f2fs: drop any block plugging),
and adds blk_plug in write paths additionally.
The main reason is that blk_start_plug can be used to wake up from low-power
mode before submitting further bios.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Datas in file can be operated by GC and DIO simultaneously, so we will
face race case as below:
For write case:
Thread A Thread B
- generic_file_direct_write
- invalidate_inode_pages2_range
- f2fs_direct_IO
- do_blockdev_direct_IO
- do_direct_IO
- get_more_blocks
- f2fs_gc
- do_garbage_collect
- gc_data_segment
- move_data_page
- do_write_data_page
migrate data block to new block address
- dio_bio_submit
update user data to old block address
For read case:
Thread A Thread B
- generic_file_direct_write
- invalidate_inode_pages2_range
- f2fs_direct_IO
- do_blockdev_direct_IO
- do_direct_IO
- get_more_blocks
- f2fs_balance_fs
- f2fs_gc
- do_garbage_collect
- gc_data_segment
- move_data_page
- do_write_data_page
migrate data block to new block address
- write_checkpoint
- do_checkpoint
- clear_prefree_segments
- f2fs_issue_discard
discard old block adress
- dio_bio_submit
update user buffer from obsolete block address
In order to fix this, for one file, we should let DIO and GC getting exclusion
against with each other.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In 1TB storage, we need to admit 22841 prefree segments, which can consume
too much segments.
This patch sets 8GB in max. prefree segments in that case.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This is to fix wrong error pointer handling flow reported by Dan.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Without this check, the following XFS_I invocations would return bad
pointers when used on non-XFS inodes (perhaps pointers into preceding
allocator chunks).
This could be used by an attacker to trick xfs_swap_extents into
performing locking operations on attacker-chosen structures in kernel
memory, potentially leading to code execution in the kernel. (I have
not investigated how likely this is to be usable for an attack in
practice.)
Signed-off-by: Jann Horn <jann@thejh.net>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Chinner <david@fromorbit.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Use __get_str(str) rather than __get_dynamic_array(str) when
deadling with strings.
It is just a code cleanup, no changes on tracepoint ABI.
Link: http://lkml.kernel.org/r/ea260df91817411cca2a1f3db2abd88860094788.1467407618.git.bristot@redhat.com
Cc: Trond Myklebust <trond.myklebust@primarydata.com>
Cc: Anna Schumaker <anna.schumaker@netapp.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: linux-nfs@vger.kernel.org
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Avoid a bad nfs server return an unaligned length of signature.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Instead of reusing the wwn-* names for multipath devices nodes RHEL and
Fedora introduce new dm-mpath-uuid-* nodes with a slightly different
naming scheme. Try these names first to ensure we always get a
multipath-capable device if it exists.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
The current code works with the standard udev/systemd names, but we'll have
to add another method in the next patch. Refactor it into a separate helper
to make room for the new variant.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
This was fixed for the original block layout code a while ago, but also
needs to be fixed for the SCSI layout path.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Don't use the same syscall numbers for 2 different syscalls:
534 x32 preadv compat_sys_preadv64
535 x32 pwritev compat_sys_pwritev64
534 x32 preadv2 compat_sys_preadv2
535 x32 pwritev2 compat_sys_pwritev2
Add compat_sys_preadv64v2() and compat_sys_pwritev64v2() so that 64-bit offset
is passed in one 64-bit register on x32, similar to compat_sys_preadv64()
and compat_sys_pwritev64().
Signed-off-by: H.J. Lu <hjl.tools@gmail.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/CAMe9rOovCMf-RQfx_n1U_Tu_DX1BYkjtFr%3DQ4-_PFVSj9BCzUA@mail.gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Although the extent tree depth of 5 should enough be for the worst
case of 2*32 extents of length 1, the extent tree code does not
currently to merge nodes which are less than half-full with a sibling
node, or to shrink the tree depth if possible. So it's possible, at
least in theory, for the tree depth to be greater than 5. However,
even in the worst case, a tree depth of 32 is highly unlikely, and if
the file system is maliciously corrupted, an insanely large eh_depth
can cause memory allocation failures that will trigger kernel warnings
(here, eh_depth = 65280):
JBD2: ext4.exe wants too many credits credits:195849 rsv_credits:0 max:256
------------[ cut here ]------------
WARNING: CPU: 0 PID: 50 at fs/jbd2/transaction.c:293 start_this_handle+0x569/0x580
CPU: 0 PID: 50 Comm: ext4.exe Not tainted 4.7.0-rc5+ #508
Stack:
604a8947 625badd8 0002fd09 00000000
60078643 00000000 62623910 601bf9bc
62623970 6002fc84 626239b0 900000125
Call Trace:
[<6001c2dc>] show_stack+0xdc/0x1a0
[<601bf9bc>] dump_stack+0x2a/0x2e
[<6002fc84>] __warn+0x114/0x140
[<6002fdff>] warn_slowpath_null+0x1f/0x30
[<60165829>] start_this_handle+0x569/0x580
[<60165d4e>] jbd2__journal_start+0x11e/0x220
[<60146690>] __ext4_journal_start_sb+0x60/0xa0
[<60120a81>] ext4_truncate+0x131/0x3a0
[<60123677>] ext4_setattr+0x757/0x840
[<600d5d0f>] notify_change+0x16f/0x2a0
[<600b2b16>] do_truncate+0x76/0xc0
[<600c3e56>] path_openat+0x806/0x1300
[<600c55c9>] do_filp_open+0x89/0xf0
[<600b4074>] do_sys_open+0x134/0x1e0
[<600b4140>] SyS_open+0x20/0x30
[<6001ea68>] handle_syscall+0x88/0x90
[<600295fd>] userspace+0x3fd/0x500
[<6001ac55>] fork_handler+0x85/0x90
---[ end trace 08b0b88b6387a244 ]---
[ Commit message modified and the extent tree depath check changed
from 5 to 32 -- tytso ]
Cc: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
If we encounter a filesystem error during orphan cleanup, we should stop.
Otherwise, we may end up in an infinite loop where the same inode is
processed again and again.
EXT4-fs (loop0): warning: checktime reached, running e2fsck is recommended
EXT4-fs error (device loop0): ext4_mb_generate_buddy:758: group 2, block bitmap and bg descriptor inconsistent: 6117 vs 0 free clusters
Aborting journal on device loop0-8.
EXT4-fs (loop0): Remounting filesystem read-only
EXT4-fs error (device loop0) in ext4_free_blocks:4895: Journal has aborted
EXT4-fs error (device loop0) in ext4_do_update_inode:4893: Journal has aborted
EXT4-fs error (device loop0) in ext4_do_update_inode:4893: Journal has aborted
EXT4-fs error (device loop0) in ext4_ext_remove_space:3068: IO failure
EXT4-fs error (device loop0) in ext4_ext_truncate:4667: Journal has aborted
EXT4-fs error (device loop0) in ext4_orphan_del:2927: Journal has aborted
EXT4-fs error (device loop0) in ext4_do_update_inode:4893: Journal has aborted
EXT4-fs (loop0): Inode 16 (00000000618192a0): orphan list check failed!
[...]
EXT4-fs (loop0): Inode 16 (0000000061819748): orphan list check failed!
[...]
EXT4-fs (loop0): Inode 16 (0000000061819bf0): orphan list check failed!
[...]
See-also: c9eb13a910 ("ext4: fix hang when processing corrupted orphaned inode list")
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
If we hit this error when mounted with errors=continue or
errors=remount-ro:
EXT4-fs error (device loop0): ext4_mb_mark_diskspace_used:2940: comm ext4.exe: Allocating blocks 5090-6081 which overlap fs metadata
then ext4_mb_new_blocks() will call ext4_mb_release_context() and try to
continue. However, ext4_mb_release_context() is the wrong thing to call
here since we are still actually using the allocation context.
Instead, just error out. We could retry the allocation, but there is a
possibility of getting stuck in an infinite loop instead, so this seems
safer.
[ Fixed up so we don't return EAGAIN to userspace. --tytso ]
Fixes: 8556e8f3b6 ("ext4: Don't allow new groups to be added during block allocation")
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: stable@vger.kernel.org
We're not holding any locks, so both nfs_wb_all() and inode_dio_wait()
are unenforcible and have livelock potential. Just limit ourselves to
flushing out the data.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
To fix super long dmesg error lines like
CHRDEV "dummy_stm.0" major number 224 goes below the dynamic allocation rangeCHRDEV "dummy_stm.1" major number 223 goes below the dynamic allocation rangeswapper: page allocation failure: order:8, mode:0x26040c0(GFP_KERNEL|__GFP_COMP|__GFP_NOTRACK)
After fix, it should look like
CHRDEV "dummy_stm.0" major number 224 goes below the dynamic allocation range
CHRDEV "dummy_stm.1" major number 223 goes below the dynamic allocation range
swapper: page allocation failure: order:8, mode:0x26040c0(GFP_KERNEL|__GFP_COMP|__GFP_NOTRACK)
Reported-by: Philip Li <philip.li@intel.com>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The __pmem address space was meant to annotate codepaths that touch
persistent memory and need to coordinate a call to wmb_pmem(). Now that
wmb_pmem() is gone, there is little need to keep this annotation.
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Flushing posted-write queues is now deferred to REQ_FLUSH context, or
otherwise handled by an ADR event at the platform level.
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
When opening a file with O_CREAT flag, check to see if the file opened
is an existing directory.
This prevents the directory from being opened which subsequently causes
a crash when the close function for directories cifs_closedir() is called
which frees up the file->private_data memory while the file is still
listed on the open file list for the tcon.
Signed-off-by: Sachin Prabhu <sprabhu@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
CC: Stable <stable@vger.kernel.org>
Reported-by: Xiaoli Feng <xifeng@redhat.com>
For the last process to close a file opened for write, function
gfs2_rsqa_delete was deleting the file's inode's block reservation
out of the rgrp reservations tree. Then it was checking to make sure
rs_free was 0, but it was performing the check outside the protection
of rd_rsspin spin_lock. The rd_rsspin spin_lock protection is needed
to prevent a race between the process freeing the reservation and
another who is allocating a new set of blocks inside the same rgrp
for the same inode, thus changing its value.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Pull vfs fixes from Al Viro.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
posix_acl: de-union a_refcount and a_rcu
nfs_atomic_open(): prevent parallel nfs_lookup() on a negative hashed
Use the right predicate in ->atomic_open() instances
We should be able to use the same helper functions used for SMB 2.1 and
later versions.
Signed-off-by: Sachin Prabhu <sprabhu@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Before commit 778be232a2 ("NFS do not find client in NFSv4
pg_authenticate"), the Linux callback server replied with
RPC_AUTH_ERROR / RPC_AUTH_BADCRED, instead of dropping the CB
request. Let's restore that behavior so the server has a chance to
do something useful about it, and provide a warning that helps
admins correct the problem.
Fixes: 778be232a2 ("NFS do not find client in NFSv4 ...")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
This patch removes the most parts of internal crypto codes.
And then, it modifies and adds some ext4-specific crypt codes to use the generic
facility.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
A confgifs attribute's show() callback is called once the first time
the user attempts to read from it. If it returns an error, that
error is returned to the user. However, the open file's
buffer_needs_fill is still set to zero and consecutive read() calls
will find an empty buffer that doesn't need filling and return 0 to
the user. This could give the user the wrong impression that the
attribute was read successfully.
Fix this by not setting buffer_needs_fill if show() returns an error,
making consecutive read() calls call show() again and either get an
error again or get data.
Signed-off-by: Tal Shorer <tal.shorer@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
With below test steps, f2fs will issue redundant discard when doing fstrim,
the reason is that we issue discards for both prefree segments and
consecutive freed region user wants to trim, part regions they covered are
overlapped, here, we change to do not to issue any discards for prefree
segments in trimmed range.
1. mount -t f2fs -o discard /dev/zram0 /mnt/f2fs
2. fstrim -o 0 -l 3221225472 -m 2097152 -v /mnt/f2fs/
3. dd if=/dev/zero of=/mnt/f2fs/a bs=2M count=1
4. dd if=/dev/zero of=/mnt/f2fs/b bs=1M count=1
5. sync
6. rm /mnt/f2fs/a /mnt/f2fs/b
7. fstrim -o 0 -l 3221225472 -m 2097152 -v /mnt/f2fs/
Before:
<...>-5428 [001] ...1 9511.052125: f2fs_issue_discard: dev = (251,0), blkstart = 0x2200, blklen = 0x200
<...>-5428 [001] ...1 9511.052787: f2fs_issue_discard: dev = (251,0), blkstart = 0x2200, blklen = 0x300
After:
<...>-6764 [000] ...1 9720.382504: f2fs_issue_discard: dev = (251,0), blkstart = 0x2200, blklen = 0x300
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch skip discard block range smaller than trim_minlen,
and can not be merged by neighbour
Signed-off-by: Yunlei He <heyunlei@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
As manual described, f_bfree indicates total free blocks in fs, in f2fs, it
includes two parts: visible free blocks and over-provision blocks. This
patch corrrects the calculation.
fsblkcnt_t f_bfree; /* free blocks in fs */
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch adds f2fs_set_page_dirty_nobuffer() copied from __set_page_dirty_buffer.
When appending 4KB blocks in f2fs on pmem with multiple cores, this improves the
overall performance.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
When base_addr is NULL, there is no need to call kzfree,
it should return -ENOMEM directly. Additionally, it is
better to initialize variable 'error' with 0.
Signed-off-by: Tiezhu Yang <kernelpatch@126.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
If we fail to move data page during foreground GC, we should give another
chance to writeback that page which was set dirty previously by writer.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In procedure of synchonized read, after sending out the read request, reader
will try to lock the page for waiting device to finish the read jobs and
unlock the page, but meanwhile, truncater will race with reader, so after
reader get lock of the page, it should check page's mapping to detect
whether someone has truncated the page in advance, then reader has the
chance to do the retry if truncation was done, otherwise read can be failed
due to previous condition check.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
For encrypted inode, if user overwrites data of the inode, f2fs will read
encrypted data into page cache, and then do the decryption.
However reader can race with overwriter, and it will see encrypted data
which has not been decrypted by overwriter yet. Fix it by moving decrypting
work to background and keep page non-uptodated until data is decrypted.
Thread A Thread B
- f2fs_file_write_iter
- __generic_file_write_iter
- generic_perform_write
- f2fs_write_begin
- f2fs_submit_page_bio
- generic_file_read_iter
- do_generic_file_read
- lock_page_killable
- unlock_page
- copy_page_to_iter
hit the encrypted data in updated page
- lock_page
- fscrypt_decrypt_page
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
- Provide a more concise fix for CVE-2016-1583
+ Additionally fixes linux-stable regressions caused by the cherry-picking of
the original fix
- Some very minor changes that have queued up
+ Fix typos in code comments
+ Remove unnecessary check for NULL before destroying kmem_cache
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=Bt4P
-----END PGP SIGNATURE-----
Merge tag 'ecryptfs-4.7-rc7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs
Pull eCryptfs fixes from Tyler Hicks:
"Provide a more concise fix for CVE-2016-1583:
- Additionally fixes linux-stable regressions caused by the
cherry-picking of the original fix
Some very minor changes that have queued up:
- Fix typos in code comments
- Remove unnecessary check for NULL before destroying kmem_cache"
* tag 'ecryptfs-4.7-rc7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs:
ecryptfs: don't allow mmap when the lower fs doesn't support it
Revert "ecryptfs: forbid opening files without mmap handler"
ecryptfs: fix spelling mistakes
eCryptfs: fix typos in comment
ecryptfs: drop null test before destroy functions
There are legitimate reasons to disallow mmap on certain files, notably
in sysfs or procfs. We shouldn't emulate mmap support on file systems
that don't offer support natively.
CVE-2016-1583
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Cc: stable@vger.kernel.org
[tyhicks: clean up f_op check by using ecryptfs_file_to_lower()]
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
This reverts commit 2f36db7100.
It fixed a local root exploit but also introduced a dependency on
the lower file system implementing an mmap operation just to open a file,
which is a bit of a heavy hammer. The right fix is to have mmap depend
on the existence of the mmap handler instead.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Cc: stable@vger.kernel.org
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Pull block IO fixes from Jens Axboe:
"Three small fixes that have been queued up and tested for this series:
- A bug fix for xen-blkfront from Bob Liu, fixing an issue with
incomplete requests during migration.
- A fix for an ancient issue in retrieving the IO priority of a
different PID than self, preventing that task from going away while
we access it. From Omar.
- A writeback fix from Tahsin, fixing a case where we'd call ihold()
with a zero ref count inode"
* 'for-linus' of git://git.kernel.dk/linux-block:
block: fix use-after-free in sys_ioprio_get()
writeback: inode cgroup wb switch should not call ihold()
xen-blkfront: save uncompleted reqs in blkfront_resume()
- a fix from Marek for ppos handling in configfs_write_bin_file,
which was introduced in Linux 4.5, but didn't have any users
until recently.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=mZ2H
-----END PGP SIGNATURE-----
Merge tag 'configfs-for-4.7' of git://git.infradead.org/users/hch/configfs
Pull configfs fix from Christoph Hellwig:
"A fix from Marek for ppos handling in configfs_write_bin_file, which
was introduced in Linux 4.5, but didn't have any users until recently"
* tag 'configfs-for-4.7' of git://git.infradead.org/users/hch/configfs:
configfs: Remove ppos increment in configfs_write_bin_file
We used to allow you to set FLUSH_ALL and then just wouldn't do things like
commit transactions or wait on ordered extents if we noticed you were in a
transaction. However now that all the flushing for FLUSH_ALL is asynchronous
we've lost the ability to tell, and we could end up deadlocking. So instead use
FLUSH_LIMIT in reserve_metadata_bytes in relocation and then return -EAGAIN if
we error out to preserve the previous behavior. I've also added an ASSERT() to
catch anybody else who tries to do this. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since we set the reloc control before we've reserved our space for relocation we
could race with a root being dirtied and not actually have space to do our init
reloc root. So once we've allocated it and set it up go ahead and make our
reservation before setting the relocate control, that way anybody who tries to
do the reloc root init has space to use. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This is the case all the time anyway except for relocation which could be doing
a reloc root for a non ref counted root, in which case we'd end up with some
random block rsv rather than the one we have our reservation in. If there isn't
enough space in the block rsv we are trying to steal from we'll BUG() because we
expect there to be space for the orphan to make its reservation. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Traditionally we've calculated the global block rsv by guessing how much of the
metadata used amount was the extent tree, and then taking the data size and
figuring out how large the csum tree would have to be to hold that much data.
This is imprecise and falls down on MIXED file systems as we can't trust the
data used amount. This resulted in failures for xfstests generic/333 because it
creates lots of clones, which explodes out the extent tree. Our global reserve
calculations were woefully inaccurate in this case which meant we got into a
situation where we did not have enough reserved to do our work.
We know we only use the global block rsv for the extent, csum, and root trees,
so just get the bytes used for these trees and use that as the basis of our
global reserve. Since these are not reference counted trees the bytes_used
value will be accurate. This fixed the transaction aborts seen with
generic/333. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Instead of doing fs_info->fs_root in need_async_flush, which may not be set
during recovery when mounting, just pass the root itself in, which makes more
sense as thats what btrfs_calc_reclaim_metadata_size takes.
Signed-off-by: Josef Bacik <jbacik@fb.com>
Reported-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We do this check when we start the async reclaimer thread, might as well check
before we kick it off to save us some cycles. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We were doing trace_btrfs_release_reserved_extent() in pin_down_extent which
isn't quite right because we will go through and free that extent later when we
unpin, so it messes up apps that are accounting for the reservation space. We
were also unconditionally doing it in __btrfs_free_reserved_extent(), when we
only actually free the reservation instead of pinning the extent. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We want to track when we're triggering flushing from our reservation code and
what flushing is being done when we start flushing. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We can sometimes drop the reservation we had for our inode, so we need to remove
that amount from to_reserve so that our tracepoint reports a valid amount of
space.
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Pinned extents are an important metric to keep track of for enospc.
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Our enospc flushing sucks. It is born from a time where we were early
enospc'ing constantly because multiple threads would race in for the same
reservation and randomly starve other ones out. So I came up with this solution
to block any other reservations from happening while one guy tried to flush
stuff to satisfy his reservation. This gives us pretty good correctness, but
completely crap latency.
The solution I've come up with is ticketed reservations. Basically we try to
make our reservation, and if we can't we put a ticket on a list in order and
kick off an async flusher thread. This async flusher thread does the same old
flushing we always did, just asynchronously. As space is freed and added back
to the space_info it checks and sees if we have any tickets that need
satisfying, and adds space to the tickets and wakes up anything we've satisfied.
Once the flusher thread stops making progress it wakes up all the current
tickets and tells them to take a hike.
There is a priority list for things that can't flush, since the async flusher
could do anything we need to avoid deadlocks. These guys get priority for
having their reservation made, and will still do manual flushing themselves in
case the async flusher isn't running.
This patch gives us significantly better latencies. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
I'm writing a tool to visualize the enospc system inside btrfs, I need this
tracepoint in order to keep track of the block groups in the system. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
These were hidden behind enospc_debug, which isn't helpful as they indicate
actual bugs, unlike the rest of the enospc_debug stuff which is really debug
information. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We reserve space for the inode update when we first reserve space for writing to
a file. However there are lots of ways that we can use this reservation and not
have it for subsequent ordered extents. Previously we'd fall through and try to
reserve metadata bytes for this, then we'd just steal the full reservation from
the delalloc_block_rsv, and if that didn't have enough space we'd steal the full
reservation from the global reserve. The problem with this is we can easily
just return ENOSPC and fallback to updating the inode item directly. In the
worst case (assuming 4k nodesize) we'd steal 64kib from the global reserve if we
fall all the way through, however if we just fallback and update the inode
directly we'd only steal 4k * BTRFS_PATH_MAX in the worst case which is 32kib.
We would have also just added the extent item for the inode so we likely will
have already cow'ed down most of the way to the leaf containing the inode item,
so we are more often than not only need one or two nodesize's worth of
reservations. Given the reservation for the extent itself is also a worst case
we will likely already have space to cover the inode update.
This change will make us behave better in the theoretical worst case, and much
better in the case that we don't have our reservation and cannot reserve more
metadata. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There are a few races in the metadata reservation stuff. First we add the bytes
to the block_rsv well after we've set the bit on the inode saying that we have
space for it and after we've reserved the bytes. So use the normal
btrfs_block_rsv_add helper for this case. Secondly we can flush delalloc
extents when we try to reserve space for our write, which means that we could
have used up the space for the inode and we wouldn't know because we only check
before the reservation. So instead make sure we are always reserving space for
the inode update, and then if we don't need it release those bytes afterward.
Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
So btrfs_block_rsv_migrate just unconditionally calls block_rsv_migrate_bytes.
Not only this but it unconditionally changes the size of the block_rsv. This
isn't a bug strictly speaking, but it makes truncate block rsv's look funny
because every time we migrate bytes over its size grows, even though we only
want it to be a specific size. So collapse this into one function that takes an
update_size argument and make truncate and evict not update the size for
consistency sake. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
For some reason we're adding bytes_readonly to the space info after we update
the space info with the block group info. This creates a tiny race where we
could over-reserve space because we haven't yet taken out the bytes_readonly
bit. Since we already know this information at the time we call
update_space_info, just pass it along so it can be updated all at once. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The f2fs_map_blocks is very related to the performance, so let's avoid any
latency to read ahead node pages.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
The readahead nat pages are more likely to be reclaimed quickly, so it'd better
to gather more free nids in advance.
And, let's keep some free nids as much as possible.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Conflicts:
drivers/net/ethernet/mellanox/mlx5/core/en.h
drivers/net/ethernet/mellanox/mlx5/core/en_main.c
drivers/net/usb/r8152.c
All three conflicts were overlapping changes.
Signed-off-by: David S. Miller <davem@davemloft.net>
This bug can be reproducible with fsfuzzer, although, I couldn't reproduce it
100% of my tries, it is quite easily reproducible.
During the deletion of an inode, ext2_xattr_delete_inode() does not check if the
block pointed by EXT2_I(inode)->i_file_acl is a valid data block, this might
lead to a deadlock, when i_file_acl == 1, and the filesystem block size is 1024.
In that situation, ext2_xattr_delete_inode, will load the superblock's buffer
head (instead of a valid i_file_acl block), and then lock that buffer head,
which, ext2_sync_super will also try to lock, making the filesystem deadlock in
the following stack trace:
root 17180 0.0 0.0 113660 660 pts/0 D+ 07:08 0:00 rmdir
/media/test/dir1
[<ffffffff8125da9f>] __sync_dirty_buffer+0xaf/0x100
[<ffffffff8125db03>] sync_dirty_buffer+0x13/0x20
[<ffffffffa03f0d57>] ext2_sync_super+0xb7/0xc0 [ext2]
[<ffffffffa03f10b9>] ext2_error+0x119/0x130 [ext2]
[<ffffffffa03e9d93>] ext2_free_blocks+0x83/0x350 [ext2]
[<ffffffffa03f3d03>] ext2_xattr_delete_inode+0x173/0x190 [ext2]
[<ffffffffa03ee9e9>] ext2_evict_inode+0xc9/0x130 [ext2]
[<ffffffff8123fd23>] evict+0xb3/0x180
[<ffffffff81240008>] iput+0x1b8/0x240
[<ffffffff8123c4ac>] d_delete+0x11c/0x150
[<ffffffff8122fa7e>] vfs_rmdir+0xfe/0x120
[<ffffffff812340ee>] do_rmdir+0x17e/0x1f0
[<ffffffff81234dd6>] SyS_rmdir+0x16/0x20
[<ffffffff81838cf2>] entry_SYSCALL_64_fastpath+0x1a/0xa4
[<ffffffffffffffff>] 0xffffffffffffffff
Fix this by using the same approach ext4 uses to test data blocks validity,
implementing ext2_data_block_valid.
An another possibility when the superblock is very corrupted, is that i_file_acl
is 1, block_count is 1 and first_data_block is 0. For such situations, we might
have i_file_acl pointing to a 'valid' block, but still step over the superblock.
The approach I used was to also test if the superblock is not in the range
described by ext2_data_block_valid() arguments
Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
If s_reserved_gdt_blocks is extremely large, it's possible for
ext4_init_block_bitmap(), which is called when ext4 sets up an
uninitialized block bitmap, to corrupt random kernel memory. Add the
same checks which e2fsck has --- it must never be larger than
blocksize / sizeof(__u32) --- and then add a backup check in
ext4_init_block_bitmap() in case the superblock gets modified after
the file system is mounted.
Reported-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
We want to ensure that we write the cached data to the server, but
don't require it be synced to disk. If the server reboots, we will
get a stateid error, which will cause us to retry anyway.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
We need to ensure that any writes to the destination file are serialised
with the copy, meaning that the writeback has to occur under the inode lock.
Also relax the writeback requirement on the source, and rely on the
stateid checking to tell us if the source rebooted. Add the helper
nfs_filemap_write_and_wait_range() to call pnfs_sync_inode() as
is appropriate for pNFS servers that may need a layoutcommit.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
When punching holes in a file, we want to ensure the operation is
serialised w.r.t. other writes, meaning that we want to call
nfs_sync_inode() while holding the inode lock.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
When retrieving stat() information, NFS unfortunately does require us to
sync writes to disk in order to ensure that mtime and ctime are up to
date. However we shouldn't have to ensure that those writes are persisted.
Relaxing that requirement does mean that we may see an mtime/ctime change
if the server reboots and forces us to replay all writes.
The exception to this rule are pNFS clients that are required to send
layoutcommit, however that is dealt with by the call to pnfs_sync_inode()
in _nfs_revalidate_inode().
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
A file that is open for O_DIRECT is by definition not obeying
close-to-open cache consistency semantics, so let's not cache
the attributes too aggressively either.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
We're now waiting immediately after taking the locks, so waiting
in fsync() and write_begin() is either redundant or potentially
subject to livelock (if not holding the lock).
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
There is only one caller that sets the "write" argument to true,
so just move the call to nfs_zap_mapping() and get rid of the
now redundant argument.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Allow dio requests to be scheduled in parallel, but ensuring that they
do not conflict with buffered I/O.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
On success, the RPC callbacks will ensure that we make the appropriate calls
to nfs_writeback_update_inode()
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
We should not be interested in looking at the value of the stable field,
since that could take any value.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
If we need to update the cached attributes, then we'd better make
sure that we also layoutcommit first. Otherwise, the server may have stale
attributes.
Prior to this patch, the revalidation code tried to "fix" this problem by
simply disabling attributes that would be affected by the layoutcommit.
That approach breaks nfs_writeback_check_extend(), leading to a file size
corruption.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
So ensure that we mark the layout for commit once the write is done,
and then ensure that the commit to ds is finished before sending
layoutcommit.
Note that by doing this, we're able to optimise away the commit
for the case of servers that don't need layoutcommit in order to
return updated attributes.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
We should always do a layoutcommit after commit to DS, except if
the layout segment we're using has set FF_FLAGS_NO_LAYOUTCOMMIT.
Fixes: d67ae825a5 ("pnfs/flexfiles: Add the FlexFile Layout Driver")
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Mostly supporting filesystems outside of init_user_ns is
s/&init_usre_ns/dquot->dq_sb->s_user_ns/. An actual need for
supporting quotas on filesystems outside of s_user_ns is quite a ways
away and to be done responsibily needs an audit on what can happen
with hostile quota files. Until that audit is complete don't attempt
to support quota files on filesystems outside of s_user_ns.
Cc: Jan Kara <jack@suse.cz>
Acked-by: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
In Q_XSETQLIMIT use sb->s_user_ns to detect when we are dealing with
the filesystems notion of id 0.
Cc: Jan Kara <jack@suse.cz>
Acked-by: Seth Forshee <seth.forshee@canonical.com>
Inspired-by: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Introduce the helper qid_has_mapping and use it to ensure that the
quota system only considers qids that map to the filesystems
s_user_ns.
In practice for quota supporting filesystems today this is the exact
same check as qid_valid. As only 0xffffffff aka (qid_t)-1 does not
map into init_user_ns.
Replace the qid_valid calls with qid_has_mapping as values come in
from userspace. This is harmless today and it prepares the quota
system to work on filesystems with quotas but mounted by unprivileged
users.
Call qid_has_mapping from dqget. This ensures the passed in qid has a
prepresentation on the underlying filesystem. Previously this was
unnecessary as filesystesm never had qids that could not map. With
the introduction of filesystems outside of s_user_ns this will not
remain true.
All of this ensures the quota code never has to deal with qids that
don't map to the underlying filesystem.
Cc: Jan Kara <jack@suse.cz>
Acked-by: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
It is expected that filesystems can not represent uids and gids from
outside of their user namespace. Keep things simple by not even
trying to create filesystem nodes with non-sense uids and gids.
Acked-by: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
When a filesystem outside of init_user_ns is mounted it could have
uids and gids stored in it that do not map to init_user_ns.
The plan is to allow those filesystems to set i_uid to INVALID_UID and
i_gid to INVALID_GID for unmapped uids and gids and then to handle
that strange case in the vfs to ensure there is consistent robust
handling of the weirdness.
Upon a careful review of the vfs and filesystems about the only case
where there is any possibility of confusion or trouble is when the
inode is written back to disk. In that case filesystems typically
read the inode->i_uid and inode->i_gid and write them to disk even
when just an inode timestamp is being updated.
Which leads to a rule that is very simple to implement and understand
inodes whose i_uid or i_gid is not valid may not be written.
In dealing with access times this means treat those inodes as if the
inode flag S_NOATIME was set. Reads of the inodes appear safe and
useful, but any write or modification is disallowed. The only inode
write that is allowed is a chown that sets the uid and gid on the
inode to valid values. After such a chown the inode is normal and may
be treated as such.
Denying all writes to inodes with uids or gids unknown to the vfs also
prevents several oddball cases where corruption would have occurred
because the vfs does not have complete information.
One problem case that is prevented is attempting to use the gid of a
directory for new inodes where the directories sgid bit is set but the
directories gid is not mapped.
Another problem case avoided is attempting to update the evm hash
after setxattr, removexattr, and setattr. As the evm hash includeds
the inode->i_uid or inode->i_gid not knowning the uid or gid prevents
a correct evm hash from being computed. evm hash verification also
fails when i_uid or i_gid is unknown but that is essentially harmless
as it does not cause filesystem corruption.
Acked-by: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
->atomic_open() can be given an in-lookup dentry *or* a negative one
found in dcache. Use d_in_lookup() to tell one from another, rather
than d_unhashed().
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
In orangefs_inode_getxattr(), an fsuid is written to dmesg. The kuid is
converted to a userspace uid via from_kuid(current_user_ns(), [...]), but
since dmesg is global, init_user_ns should be used here instead.
In copy_attributes_from_inode(), op_alloc() and fill_default_sys_attrs(),
upcall structures are populated with uids/gids that have been mapped into
the caller's namespace. However, those upcall structures are read by
another process (the userspace filesystem driver), and that process might
be running in another namespace. This effectively lets any user spoof its
uid and gid as seen by the userspace filesystem driver.
To fix the second issue, I just construct the opcall structures with
init_user_ns uids/gids and require the filesystem server to run in the
init namespace. Since orangefs is full of global state anyway (as the error
message in DUMP_DEVICE_ERROR explains, there can only be one userspace
orangefs filesystem driver at once), that shouldn't be a problem.
[
Why does orangefs even exist in the kernel if everything does upcalls into
userspace? What does orangefs do that couldn't be done with the FUSE
interface? If there is no good answer to those questions, I'd prefer to see
orangefs kicked out of the kernel. Can that be done for something that
shipped in a release?
According to commit f7ab093f74 ("Orangefs: kernel client part 1"), they
even already have a FUSE daemon, and the only rational reason (apart from
"but most of our users report preferring to use our kernel module instead")
given for not wanting to use FUSE is one "in-the-works" feature that could
probably be integated into FUSE instead.
]
This patch has been compile-tested.
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
Mike,
On Fri, Jun 3, 2016 at 9:44 PM, Mike Marshall <hubcap@omnibond.com> wrote:
> We use the return value in this one line you changed, our userspace code gets
> ill when we send it (-ENOMEM +1) as a key length...
ah, my mistake. Here's a fixed version.
Thanks,
Andreas
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
Orangefs has a catch-all xattr handler that effectively does what the
trusted handler does already.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
The ORANGEFS_XATTR_INDEX_ defines are unused; the ORANGEFS_XATTR_NAME_
defines only obfuscate the code.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
If ext4_fill_super() fails early, it's possible for ext4_evict_inode()
to call ext4_should_journal_data() before superblock options and flags
are fully set up. In that case, the iput() on the journal inode can
end up causing a BUG().
Work around this problem by reordering the tests so we only call
ext4_should_journal_data() after we know it's not the journal inode.
Fixes: 2d859db3e4 ("ext4: fix data corruption in inodes with journalled data")
Fixes: 2b405bfa84 ("ext4: fix data=journal fast mount/umount hang")
Cc: Jan Kara <jack@suse.cz>
Cc: stable@vger.kernel.org
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Right now when a new overlay inode is created, we initialize overlay
inode's ->i_mode from underlying inode ->i_mode but we retain only
file type bits (S_IFMT) and discard permission bits.
This patch changes it and retains permission bits too. This should allow
overlay to do permission checks on overlay inode itself in task context.
[SzM] It also fixes clearing suid/sgid bits on write.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reported-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Fixes: 4bacc9c923 ("overlayfs: Make f_path always point to the overlay and f_inode to the underlay")
Cc: <stable@vger.kernel.org>
Before 4bacc9c923 ("overlayfs: Make f_path...") file->f_path pointed to
the underlying file, hence suid/sgid removal on write worked fine.
After that patch file->f_path pointed to the overlay file, and the file
mode bits weren't copied to overlay_inode->i_mode. So the suid/sgid
removal simply stopped working.
The fix is to copy the mode bits, but then ovl_setattr() needs to clear
ATTR_MODE to avoid the BUG() in notify_change(). So do this first, then in
the next patch copy the mode.
Reported-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Fixes: 4bacc9c923 ("overlayfs: Make f_path always point to the overlay and f_inode to the underlay")
Cc: <stable@vger.kernel.org>
If there are racing calls to ext4_commit_super() it's possible for
another writeback of the superblock to result in the buffer being
marked with an error after we check if the buffer is marked as having
a write error and the buffer up-to-date flag is set again. If that
happens mark_buffer_dirty() can end up throwing a WARN_ON_ONCE.
Fix this by moving this check to write before we call
write_buffer_dirty(), and keeping the buffer locked during this whole
sequence.
Signed-off-by: Pranay Kr. Srivastava <pranjas@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Commit 06bd3c36a7 (ext4: fix data exposure after a crash) uncovered a
deadlock in ext4_writepages() which was previously much harder to hit.
After this commit xfstest generic/130 reproduces the deadlock on small
filesystems.
The problem happens when ext4_do_update_inode() sets LARGE_FILE feature
and marks current inode handle as synchronous. That subsequently results
in ext4_journal_stop() called from ext4_writepages() to block waiting for
transaction commit while still holding page locks, reference to io_end,
and some prepared bio in mpd structure each of which can possibly block
transaction commit from completing and thus results in deadlock.
Fix the problem by releasing page locks, io_end reference, and
submitting prepared bio before calling ext4_journal_stop().
[ Changed to defer the call to ext4_journal_stop() only if the handle
is synchronous. --tytso ]
Reported-and-tested-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
CC: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
ext4_dx_csum_verify() returns the success return value in two checksum
verification failure cases. We need to set the return values to zero
as failure like ext4_dirent_csum_verify() returning zero when failing
to find a checksum dirent at the tail.
Signed-off-by: Daeho Jeong <daeho.jeong@samsung.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
We temporally change checksum fields in buffers of some types of
metadata into '0' for verifying the checksum values. By doing this
without locking the buffer, some metadata's checksums, which are
being committed or written back to the storage, could be damaged.
In our test, several metadata blocks were found with damaged metadata
checksum value during recovery process. When we only verify the
checksum value, we have to avoid modifying checksum fields directly.
Signed-off-by: Daeho Jeong <daeho.jeong@samsung.com>
Signed-off-by: Youngjin Gil <youngjin.gil@samsung.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Pull fuse fix from Miklos Szeredi:
"This makes sure userspace filesystems are not broken by the parallel
lookups and readdir feature"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
fuse: serialize dirops by default
Pull overlayfs fixes from Miklos Szeredi:
"This contains fixes for a dentry leak, a regression in 4.6 noticed by
Docker users and missing write access checking in truncate"
* 'overlayfs-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
ovl: warn instead of error if d_type is not supported
ovl: get_write_access() in truncate
ovl: fix dentry leak for default_permissions
overlay needs underlying fs to support d_type. Recently I put in a
patch in to detect this condition and started failing mount if
underlying fs did not support d_type.
But this breaks existing configurations over kernel upgrade. Those who
are running docker (partially broken configuration) with xfs not
supporting d_type, are surprised that after kernel upgrade docker does
not run anymore.
https://github.com/docker/docker/issues/22937#issuecomment-229881315
So instead of erroring out, detect broken configuration and warn
about it. This should allow existing docker setups to continue
working after kernel upgrade.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Fixes: 45aebeaf4f ("ovl: Ensure upper filesystem supports d_type")
Cc: <stable@vger.kernel.org> 4.6
Pull vfs fixes from Al Viro:
"Tmpfs readdir throughput regression fix (this cycle) + some -stable
fodder all over the place.
One missing bit is Miklos' tonight locks.c fix - NFS folks had already
grabbed that one by the time I woke up ;-)"
[ The locks.c fix came through the nfsd tree just moments ago ]
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
namespace: update event counter when umounting a deleted dentry
9p: use file_dentry()
ceph: fix d_obtain_alias() misuses
lockless next_positive()
libfs.c: new helper - next_positive()
dcache_{readdir,dir_lseek}(): don't bother with nested ->d_lock
leases on overlayfs.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=K0mr
-----END PGP SIGNATURE-----
Merge tag 'nfsd-4.7-3' of git://linux-nfs.org/~bfields/linux
Pull lockd/locks fixes from Bruce Fields:
"One fix for lockd soft lookups in an error path, and one fix for file
leases on overlayfs"
* tag 'nfsd-4.7-3' of git://linux-nfs.org/~bfields/linux:
locks: use file_inode()
lockd: unregister notifier blocks if the service fails to come up completely
Pull libnvdimm fixes from Dan Williams:
"1/ Two regression fixes since v4.6: one for the byte order of a sysfs
attribute (bz121161) and another for QEMU 2.6's NVDIMM _DSM (ACPI
Device Specific Method) implementation that gets tripped up by new
auto-probing behavior in the NFIT driver.
2/ A fix tagged for -stable that stops the kernel from
clobbering/ignoring changes to the configuration of a 'pfn'
instance ("struct page" driver). For example changing the
alignment from 2M to 1G may silently revert to 2M if that value is
currently stored on media.
3/ A fix from Eric for an xfstests failure in dax. It is not
currently tagged for -stable since it requires an 8-exabyte file
system to trigger, and there appear to be no user visible side
effects"
* 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
nfit: fix format interface code byte order
dax: fix offset overflow in dax_io
acpi, nfit: fix acpi_check_dsm() vs zero functions implemented
libnvdimm, pfn, dax: fix initialization vs autodetect for mode + alignment
(Another one for the f_path debacle.)
ltp fcntl33 testcase caused an Oops in selinux_file_send_sigiotask.
The reason is that generic_add_lease() used filp->f_path.dentry->inode
while all the others use file_inode(). This makes a difference for files
opened on overlayfs since the former will point to the overlay inode the
latter to the underlying inode.
So generic_add_lease() added the lease to the overlay inode and
generic_delete_lease() removed it from the underlying inode. When the file
was released the lease remained on the overlay inode's lock list, resulting
in use after free.
Reported-by: Eryu Guan <eguan@redhat.com>
Fixes: 4bacc9c923 ("overlayfs: Make f_path always point to the overlay and f_inode to the underlay")
Cc: <stable@vger.kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Commit 7eaceaccab removed ->sync_page, but a few mentions of it still
existed in documentation and comments,
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
lockless_dereference() was added which can be used in place of
hard-coding smp_read_barrier_depends().
Signed-off-by: He Kuang <hekuang@huawei.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
- m_start() in fs/namespace.c expects that ns->event is incremented each
time a mount added or removed from ns->list.
- umount_tree() removes items from the list but does not increment event
counter, expecting that it's done before the function is called.
- There are some codepaths that call umount_tree() without updating
"event" counter. e.g. from __detach_mounts().
- When this happens m_start may reuse a cached mount structure that no
longer belongs to ns->list (i.e. use after free which usually leads
to infinite loop).
This change fixes the above problem by incrementing global event counter
before invoking umount_tree().
Change-Id: I622c8e84dcb9fb63542372c5dbf0178ee86bb589
Cc: stable@vger.kernel.org
Signed-off-by: Andrey Ulanov <andreyu@google.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
v9fs may be used as lower layer of overlayfs and accessing f_path.dentry
can lead to a crash. In this case it's a NULL pointer dereference in
p9_fid_create().
Fix by replacing direct access of file->f_path.dentry with the
file_dentry() accessor, which will always return a native object.
Reported-by: Alessio Igor Bogani <alessioigorbogani@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Tested-by: Alessio Igor Bogani <alessioigorbogani@gmail.com>
Fixes: 4bacc9c923 ("overlayfs: Make f_path always point to the overlay and f_inode to the underlay")
Cc: <stable@vger.kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Filesystem uids which don't map into a user namespace may result
in inode->i_uid being INVALID_UID. A symlink and its parent
could have different owners in the filesystem can both get
mapped to INVALID_UID, which may result in following a symlink
when this would not have otherwise been permitted when protected
symlinks are enabled.
Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Update posix_acl_valid to verify that an acl is within a user namespace.
Update the callers of posix_acl_valid to pass in an appropriate
user namespace. For posix_acl_xattr_set and v9fs_xattr_set_acl pass in
inode->i_sb->s_user_ns to posix_acl_valid. For md_unpack_acl pass in
&init_user_ns as no inode or superblock is in sight.
Acked-by: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
If the lockd service fails to start up then we need to be sure that the
notifier blocks are not registered, otherwise a subsequent start of the
service could cause the same notifier to be registered twice, leading to
soft lockups.
Signed-off-by: Scott Mayhew <smayhew@redhat.com>
Cc: stable@vger.kernel.org
Fixes: 0751ddf77b "lockd: Register callbacks on the inetaddr_chain..."
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Fix up nfs4_do_handle_exception() so that it can check if the operation
that received the NFS4ERR_BAD_STATEID was using a defunct delegation.
Apply that to the case of SETATTR, which will currently return EIO
in some cases where this happens.
Reported-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
If a pNFS client sets hdr->pgio_done_cb, then we should not overwrite that
in nfs4_proc_read_setup()
Fixes: 75bf47ebf6 ("pNFS/flexfile: Fix erroneous fall back to...")
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
An extent with lblock = 4294967295 and len = 1 will pass the
ext4_valid_extent() test:
ext4_lblk_t last = lblock + len - 1;
if (len == 0 || lblock > last)
return 0;
since last = 4294967295 + 1 - 1 = 4294967295. This would later trigger
the BUG_ON(es->es_lblk + es->es_len < es->es_lblk) in ext4_es_end().
We can simplify it by removing the - 1 altogether and changing the test
to use lblock + len <= lblock, since now if len = 0, then lblock + 0 ==
lblock and it fails, and if len > 0 then lblock + len > lblock in order
to pass (i.e. it doesn't overflow).
Fixes: 5946d0893 ("ext4: check for overlapping extents in ext4_valid_extent_entries()")
Fixes: 2f974865f ("ext4: check for zero length extent explicitly")
Cc: Eryu Guan <guaneryu@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Phil Turnbull <phil.turnbull@oracle.com>
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The jbd2 journal stores the commit time in 64-bit seconds and 32-bit
nanoseconds, which avoids an overflow in 2038, but it gets the numbers
from current_kernel_time(), which uses 'long' seconds on 32-bit
architectures.
This simply changes the code to call current_kernel_time64() so
we use 64-bit seconds consistently.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: stable@vger.kernel.org
So far we were tracking only dependency on transaction commit due to
starting a new handle (which may require commit to start a new
transaction). Now add tracking also for other cases where we wait for
transaction commit. This way lockdep can catch deadlocks e. g. because we
call jbd2_journal_stop() for a synchronous handle with some locks held
which rank below transaction start.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Currently lockdep map is tracked in each journal handle. To be able to
expand lockdep support to cover also other cases where we depend on
transaction commit and where handle is not available, move lockdep map
into struct journal_s. Since this makes the lockdep map shared for all
handles, we have to use rwsem_acquire_read() for acquisitions now.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The transaction the handle references is free to commit once we've
decremented t_updates counter. Move the lockdep instrumentation to that
place. Currently it was a bit later which did not really matter but
subsequent improvements to lockdep instrumentation would cause false
positives with it.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
While sending the blocking directIO in fuse, the write request is broken
into sub-requests, each of default size 128k and all the requests are sent
in non-blocking background mode if async_dio mode is supported by libfuse.
The process which issue the write wait for the completion of all the
sub-requests. Sending multiple requests parallely gives a chance to perform
parallel writes in the user space fuse implementation if it is
multi-threaded and hence improves the performance.
When there is a size extending aio dio write, we switch to blocking mode so
that we can properly update the size of the file after completion of the
writes. However, in this situation all the sub-requests are sent in
serialized manner where the next request is sent only after receiving the
reply of the current request. Hence the multi-threaded user space
implementation is not utilized properly.
This patch changes the size extending aio dio behavior to exactly follow
blocking dio. For multi threaded fuse implementation having 10 threads and
using buffer size of 64MB to perform async directIO, we are getting double
the speed.
Signed-off-by: Ashish Sangwan <ashishsangwan2@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Negotiate with userspace filesystems whether they support parallel readdir
and lookup. Disable parallelism by default for fear of breaking fuse
filesystems.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Fixes: 9902af79c0 ("parallel lookups: actual switch to rwsem")
Fixes: d9b3dbdcfd ("fuse: switch to ->iterate_shared()")
The simple_write_to_buffer() already increments the @ppos on success,
see fs/libfs.c simple_write_to_buffer() comment:
"
On success, the number of bytes written is returned and the offset @ppos
advanced by this number, or negative value is returned on error.
"
If the configfs_write_bin_file() is invoked with @count smaller than the
total length of the written binary file, it will be invoked multiple times.
Since configfs_write_bin_file() increments @ppos on success, after calling
simple_write_to_buffer(), the @ppos is incremented twice.
Subsequent invocation of configfs_write_bin_file() will result in the next
piece of data being written to the offset twice as long as the length of
the previous write, thus creating buffer with "holes" in it.
The simple testcase using DTO follows:
$ mkdir /sys/kernel/config/device-tree/overlays/1
$ dd bs=1 if=foo.dtbo of=/sys/kernel/config/device-tree/overlays/1/dtbo
Without this patch, the testcase will result in twice as big buffer in the
kernel, which is then passed to the cfs_overlay_item_dtbo_write() .
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Pantelis Antoniou <pantelis.antoniou@konsulko.com>
Several cases of overlapping changes, except the packet scheduler
conflicts which deal with the addition of the free list parameter
to qdisc_enqueue().
Signed-off-by: David S. Miller <davem@davemloft.net>
