Calling qdio_release_memory() on error is just plain wrong. It frees
the main qdio_irq struct, when following code still uses it.
Also, no other error path in qdio_establish() does this. So trust
callers to clean up via qdio_free() if some step of the QDIO
initialization fails.
Fixes: 779e6e1c72 ("[S390] qdio: new qdio driver.")
Cc: <stable@vger.kernel.org> #v2.6.27+
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Ever since CQ/QAOB support was added, calling qdio_free() straight after
qdio_alloc() results in qdio_release_memory() accessing uninitialized
memory (ie. q->u.out.use_cq and q->u.out.aobs). Followed by a
kmem_cache_free() on the random AOB addresses.
For older kernels that don't have 6e30c549f6, the same applies if
qdio_establish() fails in the DEV_STATE_ONLINE check.
While initializing q->u.out.use_cq would be enough to fix this
particular bug, the more future-proof change is to just zero-alloc the
whole struct.
Fixes: 104ea556ee ("qdio: support asynchronous delivery of storage blocks")
Cc: <stable@vger.kernel.org> #v3.2+
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Typically a switch table can be found by detecting a .rodata access
followed an indirect jump:
1969: 4a 8b 0c e5 00 00 00 mov 0x0(,%r12,8),%rcx
1970: 00
196d: R_X86_64_32S .rodata+0x438
1971: e9 00 00 00 00 jmpq 1976 <dispc_runtime_suspend+0xb6a>
1972: R_X86_64_PC32 __x86_indirect_thunk_rcx-0x4
Randy Dunlap reported a case (seen with GCC 4.8) where the .rodata
access uses RIP-relative addressing:
19bd: 48 8b 3d 00 00 00 00 mov 0x0(%rip),%rdi # 19c4 <dispc_runtime_suspend+0xbb8>
19c0: R_X86_64_PC32 .rodata+0x45c
19c4: e9 00 00 00 00 jmpq 19c9 <dispc_runtime_suspend+0xbbd>
19c5: R_X86_64_PC32 __x86_indirect_thunk_rdi-0x4
In this case the relocation addend needs to be adjusted accordingly in
order to find the location of the switch table.
The fix is for case 3 (as described in the comments), but also make the
existing case 1 & 2 checks more precise by only adjusting the addend for
R_X86_64_PC32 relocations.
This fixes the following warnings:
drivers/video/fbdev/omap2/omapfb/dss/dispc.o: warning: objtool: dispc_runtime_suspend()+0xbb8: sibling call from callable instruction with modified stack frame
drivers/video/fbdev/omap2/omapfb/dss/dispc.o: warning: objtool: dispc_runtime_resume()+0xcc5: sibling call from callable instruction with modified stack frame
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/b6098294fd67afb69af8c47c9883d7a68bf0f8ea.1526305958.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
bmAtributes offset doesn't exist in the UAC3 CS_EP descriptor.
Hence, checking for pitch control as if it was UAC2 doesn't make
any sense. Use the defined UAC3 offsets instead.
Fixes: 9a2fe9b801 ("ALSA: usb: initial USB Audio Device Class 3.0 support")
Signed-off-by: Jorge Sanjuan <jorge.sanjuan@codethink.co.uk>
Reviewed-by: Ruslan Bilovol <ruslan.bilovol@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Since we have the ttm and gem vma managers using a subset
of the file address space for objects, and these start at
0x100000000 they will overflow the new mmap checks.
I've checked all the mmap routines I could see for any
bad behaviour but overall most people use GEM/TTM VMA
managers even the legacy drivers have a hashtable.
Reported-and-Tested-by: Arthur Marsh (amarsh04 on #radeon)
Fixes: be83bbf806 (mmap: introduce sane default mmap limits)
Signed-off-by: Dave Airlie <airlied@redhat.com>
The gen bits must be read first from (resp. written last to) DMA memory.
The proper way to enforce this on Linux is to call dma_rmb() (resp.
dma_wmb()).
Signed-off-by: Regis Duchesne <hpreg@vmware.com>
Acked-by: Ronak Doshi <doshir@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The DMA mask must be set before, not after, the first DMA map operation, or
the first DMA map operation could in theory fail on some systems.
Fixes: b0eb57cb97 ("VMXNET3: Add support for virtual IOMMU")
Signed-off-by: Regis Duchesne <hpreg@vmware.com>
Acked-by: Ronak Doshi <doshir@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Earlier code of doing bitwise AND with field width bits was wrong.
Instead, simplify code to calculate ntuple_mask based on supplied
fields and then compare with mask configured in hw - which is the
correct and simpler way to validate ntuple mask.
Fixes: 3eb8b62d5a ("cxgb4: add support to create hash-filters via tc-flower offload")
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Check the TIF_32BIT_FPREGS task setting of the tracee rather than the
tracer in determining the layout of floating-point general registers in
the floating-point context, correcting access to odd-numbered registers
for o32 tracees where the setting disagrees between the two processes.
Fixes: 597ce1723e ("MIPS: Support for 64-bit FP with O32 binaries")
Signed-off-by: Maciej W. Rozycki <macro@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: <stable@vger.kernel.org> # 3.14+
Signed-off-by: James Hogan <jhogan@kernel.org>
Commit b35565bb16 ("MIPS: generic: Add support for MIPSfpga") added
and its.S file for xilfpga but forgot to add it to
arch/mips/generic/Platform so it is never used.
Fixes: b35565bb16 ("MIPS: generic: Add support for MIPSfpga")
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: <stable@vger.kernel.org> # 4.15+
Patchwork: https://patchwork.linux-mips.org/patch/19245/
Signed-off-by: James Hogan <jhogan@kernel.org>
A dtb.o is generated from nexys4ddr.dts but this is never used since it
has been moved to mips/generic with commit b35565bb16 ("MIPS: generic:
Add support for MIPSfpga").
Fixes: b35565bb16 ("MIPS: generic: Add support for MIPSfpga")
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: <stable@vger.kernel.org> # 4.15+
Patchwork: https://patchwork.linux-mips.org/patch/19244/
Signed-off-by: James Hogan <jhogan@kernel.org>
Trivial fix to spelling mistake in debugfs_entries text.
Fixes: 669e846e6c ("KVM/MIPS32: MIPS arch specific APIs for KVM")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: kernel-janitors@vger.kernel.org
Cc: <stable@vger.kernel.org> # 3.10+
Signed-off-by: James Hogan <jhogan@kernel.org>
Correct commit 7aeb753b53 ("MIPS: Implement task_user_regset_view.")
and expose the FIR register using the unused 4 bytes at the end of the
NT_PRFPREG regset. Without that register included clients cannot use
the PTRACE_GETREGSET request to retrieve the complete FPU register set
and have to resort to one of the older interfaces, either PTRACE_PEEKUSR
or PTRACE_GETFPREGS, to retrieve the missing piece of data. Also the
register is irreversibly missing from core dumps.
This register is architecturally hardwired and read-only so the write
path does not matter. Ignore data supplied on writes then.
Fixes: 7aeb753b53 ("MIPS: Implement task_user_regset_view.")
Signed-off-by: James Hogan <jhogan@kernel.org>
Signed-off-by: Maciej W. Rozycki <macro@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: <stable@vger.kernel.org> # 3.13+
Patchwork: https://patchwork.linux-mips.org/patch/19273/
Signed-off-by: James Hogan <jhogan@kernel.org>
The debug definitions were missing for MACH_JZ4770, resulting in a build
failure when DEBUG_ZBOOT was set.
Since the UART addresses are the same across all Ingenic SoCs, we just
use a #ifdef CONFIG_MACH_INGENIC instead of checking for individual
Ingenic SoCs.
Additionally, I added a #define for the UART0 address in-code and
dropped the <asm/mach-jz4740/base.h> include, for the reason that this
include file is slowly being phased out as the whole platform is being
moved to devicetree.
Fixes: 9be5f3e92e ("MIPS: ingenic: Initial JZ4770 support")
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: <stable@vger.kernel.org> # 4.16
Patchwork: https://patchwork.linux-mips.org/patch/18957/
Signed-off-by: James Hogan <jhogan@kernel.org>
When DMA will be performed to a MIPS32 1004K CPS, the L1-cache for the
range needs to be flushed and invalidated first.
The code currently takes one of two approaches.
1/ If the range is less than the size of the dcache, then HIT type
requests flush/invalidate cache lines for the particular addresses.
HIT-type requests a globalised by the CPS so this is safe on SMP.
2/ If the range is larger than the size of dcache, then INDEX type
requests flush/invalidate the whole cache. INDEX type requests affect
the local cache only. CPS does not propagate them in any way. So this
invalidation is not safe on SMP CPS systems.
Data corruption due to '2' can quite easily be demonstrated by
repeatedly "echo 3 > /proc/sys/vm/drop_caches" and then sha1sum a file
that is several times the size of available memory. Dropping caches
means that large contiguous extents (large than dcache) are more likely.
This was not a problem before Linux-4.8 because option 2 was never used
if CONFIG_MIPS_CPS was defined. The commit which removed that apparently
didn't appreciate the full consequence of the change.
We could, in theory, globalize the INDEX based flush by sending an IPI
to other cores. These cache invalidation routines can be called with
interrupts disabled and synchronous IPI require interrupts to be
enabled. Asynchronous IPI may not trigger writeback soon enough. So we
cannot use IPI in practice.
We can already test if IPI would be needed for an INDEX operation with
r4k_op_needs_ipi(R4K_INDEX). If this is true then we mustn't try the
INDEX approach as we cannot use IPI. If this is false (e.g. when there
is only one core and hence one L1 cache) then it is safe to use the
INDEX approach without IPI.
This patch avoids options 2 if r4k_op_needs_ipi(R4K_INDEX), and so
eliminates the corruption.
Fixes: c00ab4896e ("MIPS: Remove cpu_has_safe_index_cacheops")
Signed-off-by: NeilBrown <neil@brown.name>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@linux-mips.org
Cc: <stable@vger.kernel.org> # 4.8+
Patchwork: https://patchwork.linux-mips.org/patch/19259/
Signed-off-by: James Hogan <jhogan@kernel.org>
Doing an audit of trace events, I discovered two trace events in the xen
subsystem that use a hack to create zero data size trace events. This is not
what trace events are for. Trace events add memory footprint overhead, and
if all you need to do is see if a function is hit or not, simply make that
function noinline and use function tracer filtering.
Worse yet, the hack used was:
__array(char, x, 0)
Which creates a static string of zero in length. There's assumptions about
such constructs in ftrace that this is a dynamic string that is nul
terminated. This is not the case with these tracepoints and can cause
problems in various parts of ftrace.
Nuke the trace events!
Link: http://lkml.kernel.org/r/20180509144605.5a220327@gandalf.local.home
Cc: stable@vger.kernel.org
Fixes: 95a7d76897 ("xen/mmu: Use Xen specific TLB flush instead of the generic one.")
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
It's possible to crash the kernel in several different ways by sending
messages to the SMC_PNETID generic netlink family that are missing the
expected attributes:
- Missing SMC_PNETID_NAME => null pointer dereference when comparing
names.
- Missing SMC_PNETID_ETHNAME => null pointer dereference accessing
smc_pnetentry::ndev.
- Missing SMC_PNETID_IBNAME => null pointer dereference accessing
smc_pnetentry::smcibdev.
- Missing SMC_PNETID_IBPORT => out of bounds array access to
smc_ib_device::pattr[-1].
Fix it by validating that all expected attributes are present and that
SMC_PNETID_IBPORT is nonzero.
Reported-by: syzbot+5cd61039dc9b8bfa6e47@syzkaller.appspotmail.com
Fixes: 6812baabf2 ("smc: establish pnet table management")
Cc: <stable@vger.kernel.org> # v4.11+
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Avoid exiting the function with a lingering sysfs file (if the first
call to device_create_file() fails while the second succeeds), and avoid
calling devlink_port_unregister() twice.
In other words, either mlx4_init_port_info() succeeds and returns zero, or
it fails, returns non-zero, and requires no cleanup.
Fixes: 096335b3f9 ("mlx4_core: Allow dynamic MTU configuration for IB ports")
Signed-off-by: Tarick Bedeir <tarick@google.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Armada-37xx driver registers a cpufreq-dt driver. Not having
CONFIG_CPUFREQ_DT selected leads to a silent abort during the probe.
Prevent that situation by having the former depending on the latter.
Fixes: 92ce45fb87 (cpufreq: Add DVFS support for Armada 37xx)
Cc: 4.16+ <stable@vger.kernel.org> # 4.16+
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Completes the support and fixes a regression introduced in
version 20180209.
The regression caused package objects that were loaded by the Load and
loadTable operators. This created an error message like the following:
[ 0.251922] ACPI Error: No pointer back to namespace node in package
00000000fd2a44cd (20180313/dsargs-303)
Link: https://bugzilla.kernel.org/show_bug.cgi?id=199413
Fixes: 5a8361f7ec (ACPICA: Integrate package handling with module-level code)
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Allow to pass the socket address structure with AF_UNSPEC family for
compatibility purposes. selinux_socket_bind() will further check it
for INADDR_ANY and selinux_socket_connect_helper() should return
EINVAL.
For a bad address family return EINVAL instead of AFNOSUPPORT error,
i.e. what is expected from SCTP protocol in such case.
Fixes: d452930fd3 ("selinux: Add SCTP support")
Suggested-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Since sctp_bindx() and sctp_connectx() can have multiple addresses,
sk_family can differ from sa_family. Therefore, selinux_socket_bind()
and selinux_socket_connect_helper(), which process sockaddr structure
(address and port), should use the address family from that structure
too, and not from the socket one.
The initialization of the data for the audit record is moved above,
in selinux_socket_bind(), so that there is no duplicate changes and
code.
Fixes: d452930fd3 ("selinux: Add SCTP support")
Suggested-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Commit d452930fd3 ("selinux: Add SCTP support") breaks compatibility
with the old programs that can pass sockaddr_in structure with AF_UNSPEC
and INADDR_ANY to bind(). As a result, bind() returns EAFNOSUPPORT error.
This was found with LTP/asapi_01 test.
Similar to commit 29c486df6a ("net: ipv4: relax AF_INET check in
bind()"), which relaxed AF_INET check for compatibility, add AF_UNSPEC
case to AF_INET and make sure that the address is INADDR_ANY.
Fixes: d452930fd3 ("selinux: Add SCTP support")
Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
We used to initialize ptr_ring during TUNSETIFF, this is because its
size depends on the tx_queue_len of netdevice. And we try to clean it
up when socket were detached from netdevice. A race were spotted when
trying to do uninit during a read which will lead a use after free for
pointer ring. Solving this by always initialize a zero size ptr_ring
in open() and do resizing during TUNSETIFF, and then we can safely do
cleanup during close(). With this, there's no need for the workaround
that was introduced by commit 4df0bfc799 ("tun: fix a memory leak
for tfile->tx_array").
Reported-by: syzbot+e8b902c3c3fadf0a9dba@syzkaller.appspotmail.com
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Fixes: 1576d98605 ("tun: switch to use skb array for tx")
Signed-off-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix the USB3 reset (offset 0x200c, bit 5) on Uniphier LD20. It was
incorrectly labeled as GIO reset. This reset line is not yet used in
uniphier-ld20.dtsi.
-----BEGIN PGP SIGNATURE-----
iI0EABYIADUWIQRRO6F6WdpH1R0vGibVhaclGDdiwAUCWvmr9RcccC56YWJlbEBw
ZW5ndXRyb25peC5kZQAKCRDVhaclGDdiwJlYAP4008mrJKjGTLMy/GZOwMIpmdm3
7qYxoD3rsgyby0Cn+QEAhyfrNAXHmcAwXxuprPGB1Z2rAmN23KqnpoqiVxhn6AQ=
=4LaA
-----END PGP SIGNATURE-----
Merge tag 'reset-fixes-for-4.17' of git://git.pengutronix.de/pza/linux into fixes
Reset controller fixes for v4.17
Fix the USB3 reset (offset 0x200c, bit 5) on Uniphier LD20. It was
incorrectly labeled as GIO reset. This reset line is not yet used in
uniphier-ld20.dtsi.
* tag 'reset-fixes-for-4.17' of git://git.pengutronix.de/pza/linux:
reset: uniphier: fix USB clock line for LD20
Signed-off-by: Olof Johansson <olof@lixom.net>
Declare missing clocks needed for network on Armada 8040 base boards
(such as the McBin)
-----BEGIN PGP SIGNATURE-----
iF0EABECAB0WIQQYqXDMF3cvSLY+g9cLBhiOFHI71QUCWvlJAQAKCRALBhiOFHI7
1SoAAJoCngBPtDyyQCn2s7nMGywq0/a2qwCfSSzQbadOLiBe5jUMsR9LG9M4L2E=
=XZeW
-----END PGP SIGNATURE-----
Merge tag 'mvebu-fixes-4.17-1' of git://git.infradead.org/linux-mvebu into fixes
mvebu fixes for 4.17 (part 1)
Declare missing clocks needed for network on Armada 8040 base boards
(such as the McBin)
* tag 'mvebu-fixes-4.17-1' of git://git.infradead.org/linux-mvebu:
ARM64: dts: marvell: armada-cp110: Add mg_core_clk for ethernet node
ARM64: dts: marvell: armada-cp110: Add clocks for the xmdio node
Signed-off-by: Olof Johansson <olof@lixom.net>
platform_domain_notifier contains a variable sized array, which the
pm_clk_notify() notifier treats as a NULL terminated array:
for (con_id = clknb->con_ids; *con_id; con_id++)
pm_clk_add(dev, *con_id);
Omitting the initialiser for con_ids means that the array is zero
sized, and there is no NULL terminator. This leads to pm_clk_notify()
overrunning into what ever structure follows, which may not be NULL.
This leads to an oops:
Unable to handle kernel NULL pointer dereference at virtual address 0000008c
pgd = c0003000
[0000008c] *pgd=80000800004003c, *pmd=00000000c
Internal error: Oops: 206 [#1] PREEMPT SMP ARM
Modules linked in:c
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.16.0+ #9
Hardware name: Keystone
PC is at strlen+0x0/0x34
LR is at kstrdup+0x18/0x54
pc : [<c0623340>] lr : [<c0111d6c>] psr: 20000013
sp : eec73dc0 ip : eed780c0 fp : 00000001
r10: 00000000 r9 : 00000000 r8 : eed71e10
r7 : 0000008c r6 : 0000008c r5 : 014000c0 r4 : c03a6ff4
r3 : c09445d0 r2 : 00000000 r1 : 014000c0 r0 : 0000008c
Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user
Control: 30c5387d Table: 00003000 DAC: fffffffd
Process swapper/0 (pid: 1, stack limit = 0xeec72210)
Stack: (0xeec73dc0 to 0xeec74000)
...
[<c0623340>] (strlen) from [<c0111d6c>] (kstrdup+0x18/0x54)
[<c0111d6c>] (kstrdup) from [<c03a6ff4>] (__pm_clk_add+0x58/0x120)
[<c03a6ff4>] (__pm_clk_add) from [<c03a731c>] (pm_clk_notify+0x64/0xa8)
[<c03a731c>] (pm_clk_notify) from [<c004614c>] (notifier_call_chain+0x44/0x84)
[<c004614c>] (notifier_call_chain) from [<c0046320>] (__blocking_notifier_call_chain+0x48/0x60)
[<c0046320>] (__blocking_notifier_call_chain) from [<c0046350>] (blocking_notifier_call_chain+0x18/0x20)
[<c0046350>] (blocking_notifier_call_chain) from [<c0390234>] (device_add+0x36c/0x534)
[<c0390234>] (device_add) from [<c047fc00>] (of_platform_device_create_pdata+0x70/0xa4)
[<c047fc00>] (of_platform_device_create_pdata) from [<c047fea0>] (of_platform_bus_create+0xf0/0x1ec)
[<c047fea0>] (of_platform_bus_create) from [<c047fff8>] (of_platform_populate+0x5c/0xac)
[<c047fff8>] (of_platform_populate) from [<c08b1f04>] (of_platform_default_populate_init+0x8c/0xa8)
[<c08b1f04>] (of_platform_default_populate_init) from [<c000a78c>] (do_one_initcall+0x3c/0x164)
[<c000a78c>] (do_one_initcall) from [<c087bd9c>] (kernel_init_freeable+0x10c/0x1d0)
[<c087bd9c>] (kernel_init_freeable) from [<c0628db0>] (kernel_init+0x8/0xf0)
[<c0628db0>] (kernel_init) from [<c00090d8>] (ret_from_fork+0x14/0x3c)
Exception stack(0xeec73fb0 to 0xeec73ff8)
3fa0: 00000000 00000000 00000000 00000000
3fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
3fe0: 00000000 00000000 00000000 00000000 00000013 00000000
Code: e3520000 1afffff7 e12fff1e c0801730 (e5d02000)
---[ end trace cafa8f148e262e80 ]---
Fix this by adding the necessary initialiser.
Fixes: fc20ffe121 ("ARM: keystone: add PM domain support for clock management")
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Acked-by: Santosh Shilimkar <ssantosh@kernel.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
It has been observed that writing 0xF2 to the power register while it
reads as 0xF4 results in the register having the value 0xF0, i.e. clearing
RESUME and setting SUSPENDM in one go does not work. It might also violate
the USB spec to transition directly from resume to suspend, especially
when not taking T_DRSMDN into account. But this is what happens when a
remote wakeup occurs between SetPortFeature USB_PORT_FEAT_SUSPEND on the
root hub and musb_bus_suspend being called.
This commit returns -EBUSY when musb_bus_suspend is called while remote
wakeup is signalled and thus avoids to reset the RESUME bit. Ignoring
this error when musb_port_suspend is called from musb_hub_control is ok.
Signed-off-by: Daniel Glöckner <dg@emlix.com>
Signed-off-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If a file has xattrs, we fsync it, to ensure we clear the flags
BTRFS_INODE_NEEDS_FULL_SYNC and BTRFS_INODE_COPY_EVERYTHING from its
inode, the current transaction commits and then we fsync it (without
either of those bits being set in its inode), we end up not logging
all its xattrs. This results in deleting all xattrs when replying the
log after a power failure.
Trivial reproducer
$ mkfs.btrfs -f /dev/sdb
$ mount /dev/sdb /mnt
$ touch /mnt/foobar
$ setfattr -n user.xa -v qwerty /mnt/foobar
$ xfs_io -c "fsync" /mnt/foobar
$ sync
$ xfs_io -c "pwrite -S 0xab 0 64K" /mnt/foobar
$ xfs_io -c "fsync" /mnt/foobar
<power failure>
$ mount /dev/sdb /mnt
$ getfattr --absolute-names --dump /mnt/foobar
<empty output>
$
So fix this by making sure all xattrs are logged if we log a file's inode
item and neither the flags BTRFS_INODE_NEEDS_FULL_SYNC nor
BTRFS_INODE_COPY_EVERYTHING were set in the inode.
Fixes: 36283bf777 ("Btrfs: fix fsync xattr loss in the fast fsync path")
Cc: <stable@vger.kernel.org> # 4.2+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
btrfs incremental send BUG happens when creating a snapshot of snapshot
that is being used by send.
[REASON]
The problem can happen if while we are doing a send one of the snapshots
used (parent or send) is snapshotted, because snapshoting implies COWing
the root of the source subvolume/snapshot.
1. When doing an incremental send, the send process will get the commit
roots from the parent and send snapshots, and add references to them
through extent_buffer_get().
2. When a snapshot/subvolume is snapshotted, its root node is COWed
(transaction.c:create_pending_snapshot()).
3. COWing releases the space used by the node immediately, through:
__btrfs_cow_block()
--btrfs_free_tree_block()
----btrfs_add_free_space(bytenr of node)
4. Because send doesn't hold a transaction open, it's possible that
the transaction used to create the snapshot commits, switches the
commit root and the old space used by the previous root node gets
assigned to some other node allocation. Allocation of a new node will
use the existing extent buffer found in memory, which we previously
got a reference through extent_buffer_get(), and allow the extent
buffer's content (pages) to be modified:
btrfs_alloc_tree_block
--btrfs_reserve_extent
----find_free_extent (get bytenr of old node)
--btrfs_init_new_buffer (use bytenr of old node)
----btrfs_find_create_tree_block
------alloc_extent_buffer
--------find_extent_buffer (get old node)
5. So send can access invalid memory content and have unpredictable
behaviour.
[FIX]
So we fix the problem by copying the commit roots of the send and
parent snapshots and use those copies.
CallTrace looks like this:
------------[ cut here ]------------
kernel BUG at fs/btrfs/ctree.c:1861!
invalid opcode: 0000 [#1] SMP
CPU: 6 PID: 24235 Comm: btrfs Tainted: P O 3.10.105 #23721
ffff88046652d680 ti: ffff88041b720000 task.ti: ffff88041b720000
RIP: 0010:[<ffffffffa08dd0e8>] read_node_slot+0x108/0x110 [btrfs]
RSP: 0018:ffff88041b723b68 EFLAGS: 00010246
RAX: ffff88043ca6b000 RBX: ffff88041b723c50 RCX: ffff880000000000
RDX: 000000000000004c RSI: ffff880314b133f8 RDI: ffff880458b24000
RBP: 0000000000000000 R08: 0000000000000001 R09: ffff88041b723c66
R10: 0000000000000001 R11: 0000000000001000 R12: ffff8803f3e48890
R13: ffff8803f3e48880 R14: ffff880466351800 R15: 0000000000000001
FS: 00007f8c321dc8c0(0000) GS:ffff88047fcc0000(0000)
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
R2: 00007efd1006d000 CR3: 0000000213a24000 CR4: 00000000003407e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Stack:
ffff88041b723c50 ffff8803f3e48880 ffff8803f3e48890 ffff8803f3e48880
ffff880466351800 0000000000000001 ffffffffa08dd9d7 ffff88041b723c50
ffff8803f3e48880 ffff88041b723c66 ffffffffa08dde85 a9ff88042d2c4400
Call Trace:
[<ffffffffa08dd9d7>] ? tree_move_down.isra.33+0x27/0x50 [btrfs]
[<ffffffffa08dde85>] ? tree_advance+0xb5/0xc0 [btrfs]
[<ffffffffa08e83d4>] ? btrfs_compare_trees+0x2d4/0x760 [btrfs]
[<ffffffffa0982050>] ? finish_inode_if_needed+0x870/0x870 [btrfs]
[<ffffffffa09841ea>] ? btrfs_ioctl_send+0xeda/0x1050 [btrfs]
[<ffffffffa094bd3d>] ? btrfs_ioctl+0x1e3d/0x33f0 [btrfs]
[<ffffffff81111133>] ? handle_pte_fault+0x373/0x990
[<ffffffff8153a096>] ? atomic_notifier_call_chain+0x16/0x20
[<ffffffff81063256>] ? set_task_cpu+0xb6/0x1d0
[<ffffffff811122c3>] ? handle_mm_fault+0x143/0x2a0
[<ffffffff81539cc0>] ? __do_page_fault+0x1d0/0x500
[<ffffffff81062f07>] ? check_preempt_curr+0x57/0x90
[<ffffffff8115075a>] ? do_vfs_ioctl+0x4aa/0x990
[<ffffffff81034f83>] ? do_fork+0x113/0x3b0
[<ffffffff812dd7d7>] ? trace_hardirqs_off_thunk+0x3a/0x6c
[<ffffffff81150cc8>] ? SyS_ioctl+0x88/0xa0
[<ffffffff8153e422>] ? system_call_fastpath+0x16/0x1b
---[ end trace 29576629ee80b2e1 ]---
Fixes: 7069830a9e ("Btrfs: add btrfs_compare_trees function")
CC: stable@vger.kernel.org # 3.6+
Signed-off-by: Robbie Ko <robbieko@synology.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Some AFS servers refuse to accept unencrypted traffic, so can't be accessed
with kAFS. Set the AF_RXRPC security level to encrypt client calls to deal
with this.
Note that incoming service calls are set by the remote client and so aren't
affected by this.
This requires an AF_RXRPC patch to pass the value set by setsockopt to calls
begun by the kernel.
Signed-off-by: David Howells <dhowells@redhat.com>
The handling of CB.CallBack messages sent by the fileserver to the client
is broken in that they are currently being processed after the reply has
been transmitted.
This is not what the fileserver expects, however. It holds up change
visibility until the reply comes so as to maintain cache coherency, and so
expects the client to have to refetch the state on the affected files.
Fix CB.CallBack handling to perform the callback break before sending the
reply.
The fileserver is free to hold up status fetches issued by other threads on
the same client that occur in reponse to the callback until any pending
changes have been committed.
Fixes: d001648ec7 ("rxrpc: Don't expose skbs to in-kernel users [ver #2]")
Signed-off-by: David Howells <dhowells@redhat.com>
It's possible for an AFS file server to issue a whole-volume notification
that callbacks on all the vnodes in the file have been broken. This is
done for R/O and backup volumes (which don't have per-file callbacks) and
for things like a volume being taken offline.
Fix callback handling to detect whole-volume notifications, to track it
across operations and to check it during inode validation.
Fixes: c435ee3455 ("afs: Overhaul the callback handling")
Signed-off-by: David Howells <dhowells@redhat.com>
The code that looks up servers by addresses makes the assumption
that the list of addresses for a server is sorted. It exits the
loop if it finds that the target address is larger than the
current candidate. As the list is not currently sorted, this
can lead to a failure to find a matching server, which can cause
callbacks from that server to be ignored.
Remove the early exit case so that the complete list is searched.
Fixes: d2ddc776a4 ("afs: Overhaul volume and server record caching and fileserver rotation")
Signed-off-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
If the client cache manager operations that need the server record
(CB.Callback, CB.InitCallBackState, and CB.InitCallBackState3) can't find
the server record, they abort the call from the file server with
RX_CALL_DEAD when they should return okay.
Fixes: c35eccb1f6 ("[AFS]: Implement the CB.InitCallBackState3 operation.")
Signed-off-by: David Howells <dhowells@redhat.com>
Fix the handling of the CB.InitCallBackState3 service call to find the
record of a server that we're using by looking it up by the UUID passed as
the parameter rather than by its address (of which it might have many, and
which may change).
Fixes: c35eccb1f6 ("[AFS]: Implement the CB.InitCallBackState3 operation.")
Signed-off-by: David Howells <dhowells@redhat.com>
If a volume location record lists multiple file servers for a volume, then
it's possible that due to a misconfiguration or a changing configuration
that one of the file servers doesn't know about it yet and will abort
VNOVOL. Currently, the rotation algorithm will stop with EREMOTEIO.
Fix this by moving on to try the next server if VNOVOL is returned. Once
all the servers have been tried and the record rechecked, the algorithm
will stop with EREMOTEIO or ENOMEDIUM.
Fixes: d2ddc776a4 ("afs: Overhaul volume and server record caching and fileserver rotation")
Reported-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
The OpenAFS server's RXAFS_InlineBulkStatus implementation has a bug
whereby if an error occurs on one of the vnodes being queried, then the
errorCode field is set correctly in the corresponding status, but the
interfaceVersion field is left unset.
Fix kAFS to deal with this by evaluating the AFSFetchStatus blob against
the following cases when called from FS.InlineBulkStatus delivery:
(1) If InterfaceVersion == 0 then:
(a) If errorCode != 0 then it indicates the abort code for the
corresponding vnode.
(b) If errorCode == 0 then the status record is invalid.
(2) If InterfaceVersion == 1 then:
(a) If errorCode != 0 then it indicates the abort code for the
corresponding vnode.
(b) If errorCode == 0 then the status record is valid and can be
parsed.
(3) If InterfaceVersion is anything else then the status record is
invalid.
Fixes: dd9fbcb8e1 ("afs: Rearrange status mapping")
Reported-by: Jeffrey Altman <jaltman@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
The code is doing monolithic reads for all chunks except the last one
which is wrong since a monolithic read will issue the
READ0+ADDRS+READ_START sequence. It not only takes longer because it
forces the NAND chip to reload the page content into its internal
cache, but by doing that we also reset the column pointer to 0, which
means we'll always read the first chunk instead of moving to the next
one.
Rework the code to do a monolithic read only for the first chunk,
then switch to naked reads for all intermediate chunks and finally
issue a last naked read for the last chunk.
Fixes: 02f26ecf8c mtd: nand: add reworked Marvell NAND controller driver
Cc: stable@vger.kernel.org
Reported-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Tested-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
Commit 9e343e87d2 ("mtd: cfi: convert inline functions to macros")
changed map_word_andequal() into a macro, but also changed the right
hand side of the comparison from val3 to val2. Change it back to use
val3 on the right hand side.
Thankfully this did not cause a regression because all callers
currently pass the same argument for val2 and val3.
Fixes: 9e343e87d2 ("mtd: cfi: convert inline functions to macros")
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
The server rotation algorithm just gives up if it fails to probe a
fileserver. Fix this by rotating to the next fileserver instead.
Fixes: d2ddc776a4 ("afs: Overhaul volume and server record caching and fileserver rotation")
Signed-off-by: David Howells <dhowells@redhat.com>
The refcounting on afs_cb_interest struct objects in
afs_register_server_cb_interest() is wrong as it uses the server list
entry's call back interest pointer without regard for the fact that it
might be replaced at any time and the object thrown away.
Fix this by:
(1) Put a lock on the afs_server_list struct that can be used to
mediate access to the callback interest pointers in the servers array.
(2) Keep a ref on the callback interest that we get from the entry.
(3) Dropping the old reference held by vnode->cb_interest if we replace
the pointer.
Fixes: c435ee3455 ("afs: Overhaul the callback handling")
Signed-off-by: David Howells <dhowells@redhat.com>
When a server record is destroyed, we want to send a message to the server
telling it that we're giving up all the callbacks it has promised us.
Apply two fixes to this:
(1) Only send the FS.GiveUpAllCallBacks message if we actually got a
callback from that server. We assume this to be the case if we
performed at least one successful FS operation on that server.
(2) Send it to the address last used for that server rather than always
picking the first address in the list (which might be unreachable).
Fixes: d2ddc776a4 ("afs: Overhaul volume and server record caching and fileserver rotation")
Signed-off-by: David Howells <dhowells@redhat.com>
The parsing of port specifiers in the address list obtained from the DNS
resolution upcall doesn't work as in4_pton() and in6_pton() will fail on
encountering an unexpected delimiter (in this case, the '+' marking the
port number). However, in*_pton() can't be given multiple specifiers.
Fix this by finding the delimiter in advance and not relying on in*_pton()
to find the end of the address for us.
Fixes: 8b2a464ced ("afs: Add an address list concept")
Signed-off-by: David Howells <dhowells@redhat.com>
The afs directory loading code (primarily afs_read_dir()) locks all the
pages that hold a directory's content blob to defend against
getdents/getdents races and getdents/lookup races where the competitors
issue conflicting reads on the same data. As the reads will complete
consecutively, they may retrieve different versions of the data and
one may overwrite the data that the other is busy parsing.
Fix this by not locking the pages at all, but rather by turning the
validation lock into an rwsem and getting an exclusive lock on it whilst
reading the data or validating the attributes and a shared lock whilst
parsing the data. Sharing the attribute validation lock should be fine as
the data fetch will retrieve the attributes also.
The individual page locks aren't needed at all as the only place they're
being used is to serialise data loading.
Without this patch, the:
if (!test_bit(AFS_VNODE_DIR_VALID, &dvnode->flags)) {
...
}
part of afs_read_dir() may be skipped, leaving the pages unlocked when we
hit the success: clause - in which case we try to unlock the not-locked
pages, leading to the following oops:
page:ffffe38b405b4300 count:3 mapcount:0 mapping:ffff98156c83a978 index:0x0
flags: 0xfffe000001004(referenced|private)
raw: 000fffe000001004 ffff98156c83a978 0000000000000000 00000003ffffffff
raw: dead000000000100 dead000000000200 0000000000000001 ffff98156b27c000
page dumped because: VM_BUG_ON_PAGE(!PageLocked(page))
page->mem_cgroup:ffff98156b27c000
------------[ cut here ]------------
kernel BUG at mm/filemap.c:1205!
...
RIP: 0010:unlock_page+0x43/0x50
...
Call Trace:
afs_dir_iterate+0x789/0x8f0 [kafs]
? _cond_resched+0x15/0x30
? kmem_cache_alloc_trace+0x166/0x1d0
? afs_do_lookup+0x69/0x490 [kafs]
? afs_do_lookup+0x101/0x490 [kafs]
? key_default_cmp+0x20/0x20
? request_key+0x3c/0x80
? afs_lookup+0xf1/0x340 [kafs]
? __lookup_slow+0x97/0x150
? lookup_slow+0x35/0x50
? walk_component+0x1bf/0x490
? path_lookupat.isra.52+0x75/0x200
? filename_lookup.part.66+0xa0/0x170
? afs_end_vnode_operation+0x41/0x60 [kafs]
? __check_object_size+0x9c/0x171
? strncpy_from_user+0x4a/0x170
? vfs_statx+0x73/0xe0
? __do_sys_newlstat+0x39/0x70
? __x64_sys_getdents+0xc9/0x140
? __x64_sys_getdents+0x140/0x140
? do_syscall_64+0x5b/0x160
? entry_SYSCALL_64_after_hwframe+0x44/0xa9
Fixes: f3ddee8dc4 ("afs: Fix directory handling")
Reported-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
We assume that the CSB is written using the normal ringbuffer
coherency protocols, as outlined in kernel/events/ring_buffer.c:
* (HW) (DRIVER)
*
* if (LOAD ->data_tail) { LOAD ->data_head
* (A) smp_rmb() (C)
* STORE $data LOAD $data
* smp_wmb() (B) smp_mb() (D)
* STORE ->data_head STORE ->data_tail
* }
So we assume that the HW fulfils its ordering requirements (B), and so
we should use a complimentary rmb (C) to ensure that our read of its
WRITE pointer is completed before we start accessing the data.
The final mb (D) is implied by the uncached mmio we perform to inform
the HW of our READ pointer.
References: https://bugs.freedesktop.org/show_bug.cgi?id=105064
References: https://bugs.freedesktop.org/show_bug.cgi?id=105888
References: https://bugs.freedesktop.org/show_bug.cgi?id=106185
Fixes: 767a983ab2 ("drm/i915/execlists: Read the context-status HEAD from the HWSP")
References: 61bf9719fa ("drm/i915/cnl: Use mmio access to context status buffer")
Suggested-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Rafael Antognolli <rafael.antognolli@intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Cc: Timo Aaltonen <tjaalton@ubuntu.com>
Tested-by: Timo Aaltonen <tjaalton@ubuntu.com>
Acked-by: Michel Thierry <michel.thierry@intel.com>
Acked-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180511121147.31915-1-chris@chris-wilson.co.uk
(cherry picked from commit 77dfedb5be)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Operating on a zero sized GEM userptr object will lead to explosions.
Fixes: 5cc9ed4b9a ("drm/i915: Introduce mapping of user pages into video memory (userptr) ioctl")
Testcase: igt/gem_userptr_blits/input-checking
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180502195021.30900-1-matthew.auld@intel.com
(cherry picked from commit c11c7bfd21)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
mm_pkey_is_allocated() treats pkey 0 as unallocated. That is
inconsistent with the manpages, and also inconsistent with
mm->context.pkey_allocation_map. Stop special casing it and only
disallow values that are actually bad (< 0).
The end-user visible effect of this is that you can now use
mprotect_pkey() to set pkey=0.
This is a bit nicer than what Ram proposed[1] because it is simpler
and removes special-casing for pkey 0. On the other hand, it does
allow applications to pkey_free() pkey-0, but that's just a silly
thing to do, so we are not going to protect against it.
The scenario that could happen is similar to what happens if you free
any other pkey that is in use: it might get reallocated later and used
to protect some other data. The most likely scenario is that pkey-0
comes back from pkey_alloc(), an access-disable or write-disable bit
is set in PKRU for it, and the next stack access will SIGSEGV. It's
not horribly different from if you mprotect()'d your stack or heap to
be unreadable or unwritable, which is generally very foolish, but also
not explicitly prevented by the kernel.
1. http://lkml.kernel.org/r/1522112702-27853-1-git-send-email-linuxram@us.ibm.com
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>p
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michael Ellermen <mpe@ellerman.id.au>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ram Pai <linuxram@us.ibm.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mm@kvack.org
Cc: stable@vger.kernel.org
Fixes: 58ab9a088d ("x86/pkeys: Check against max pkey to avoid overflows")
Link: http://lkml.kernel.org/r/20180509171358.47FD785E@viggo.jf.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
