skb_warn_bad_offload and netdev_rx_csum_fault trigger on hard to debug
issues. Dump more state and the header.
Optionally dump the entire packet and linear segment. This is required
to debug checksum bugs that may include bytes past skb_tail_pointer().
Both call sites call this function inside a net_ratelimit() block.
Limit full packet log further to a hard limit of can_dump_full (5).
Based on an earlier patch by Cong Wang, see link below.
Changes v1 -> v2
- dump frag_list only on full_pkt
Link: https://patchwork.ozlabs.org/patch/1000841/
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Processes can request ipv6 flowlabels with cmsg IPV6_FLOWINFO.
If not set, by default an autogenerated flowlabel is selected.
Explicit flowlabels require a control operation per label plus a
datapath check on every connection (every datagram if unconnected).
This is particularly expensive on unconnected sockets multiplexing
many flows, such as QUIC.
In the common case, where no lease is exclusive, the check can be
safely elided, as both lease request and check trivially succeed.
Indeed, autoflowlabel does the same even with exclusive leases.
Elide the check if no process has requested an exclusive lease.
fl6_sock_lookup previously returns either a reference to a lease or
NULL to denote failure. Modify to return a real error and update
all callers. On return NULL, they can use the label and will elide
the atomic_dec in fl6_sock_release.
This is an optimization. Robust applications still have to revert to
requesting leases if the fast path fails due to an exclusive lease.
Changes RFC->v1:
- use static_key_false_deferred to rate limit jump label operations
- call static_key_deferred_flush to stop timers on exit
- move decrement out of RCU context
- defer optimization also if opt data is associated with a lease
- updated all fp6_sock_lookup callers, not just udp
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If an app is playing tricks to reuse a socket via tcp_disconnect(),
bytes_acked/received needs to be reset to 0. Otherwise tcp_info will
report the sum of the current and the old connection..
Cc: Eric Dumazet <edumazet@google.com>
Fixes: 0df48c26d8 ("tcp: add tcpi_bytes_acked to tcp_info")
Fixes: bdd1f9edac ("tcp: add tcpi_bytes_received to tcp_info")
Signed-off-by: Christoph Paasch <cpaasch@apple.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
IFLA_BOND_PEER_NOTIF_DELAY was set to the value of downdelay instead
of peer_notif_delay. After this change, the correct value is exported.
Fixes: 07a4ddec3c ("bonding: add an option to specify a delay between peer notifications")
Signed-off-by: Vincent Bernat <vincent@bernat.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
socket->wq is assign-once, set when we are initializing both
struct socket it's in and struct socket_wq it points to. As the
matter of fact, the only reason for separate allocation was the
ability to RCU-delay freeing of socket_wq. RCU-delaying the
freeing of socket itself gets rid of that need, so we can just
fold struct socket_wq into the end of struct socket and simplify
the life both for sock_alloc_inode() (one allocation instead of
two) and for tun/tap oddballs, where we used to embed struct socket
and struct socket_wq into the same structure (now - embedding just
the struct socket).
Note that reference to struct socket_wq in struct sock does remain
a reference - that's unchanged.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
we do have an RCU-delayed part there already (freeing the wq),
so it's not like the pipe situation; moreover, it might be
worth considering coallocating wq with the rest of struct sock_alloc.
->sk_wq in struct sock would remain a pointer as it is, but
the object it normally points to would be coallocated with
struct socket...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann says:
====================
pull-request: bpf-next 2019-07-09
The following pull-request contains BPF updates for your *net-next* tree.
The main changes are:
1) Lots of libbpf improvements: i) addition of new APIs to attach BPF
programs to tracing entities such as {k,u}probes or tracepoints,
ii) improve specification of BTF-defined maps by eliminating the
need for data initialization for some of the members, iii) addition
of a high-level API for setting up and polling perf buffers for
BPF event output helpers, all from Andrii.
2) Add "prog run" subcommand to bpftool in order to test-run programs
through the kernel testing infrastructure of BPF, from Quentin.
3) Improve verifier for BPF sockaddr programs to support 8-byte stores
for user_ip6 and msg_src_ip6 members given clang tends to generate
such stores, from Stanislav.
4) Enable the new BPF JIT zero-extension optimization for further
riscv64 ALU ops, from Luke.
5) Fix a bpftool json JIT dump crash on powerpc, from Jiri.
6) Fix an AF_XDP race in generic XDP's receive path, from Ilya.
7) Various smaller fixes from Ilya, Yue and Arnd.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Unlike driver mode, generic xdp receive could be triggered
by different threads on different CPU cores at the same time
leading to the fill and rx queue breakage. For example, this
could happen while sending packets from two processes to the
first interface of veth pair while the second part of it is
open with AF_XDP socket.
Need to take a lock for each generic receive to avoid race.
Fixes: c497176cb2 ("xsk: add Rx receive functions and poll support")
Signed-off-by: Ilya Maximets <i.maximets@samsung.com>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Tested-by: William Tu <u9012063@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Stephen Suryaputra says:
====================
net: Multipath hashing on inner L3
This series extends commit 363887a2cd ("ipv4: Support multipath
hashing on inner IP pkts for GRE tunnel") to include support when the
outer L3 is IPv6 and to consider the case where the inner L3 is
different version from the outer L3, such as IPv6 tunneled by IPv4 GRE
or vice versa. It also includes kselftest scripts to test the use cases.
v2: Clarify the commit messages in the commits in this series to use the
term tunneled by IPv4 GRE or by IPv6 GRE so that it's clear which
one is the inner and which one is the outer (per David Miller).
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add selftest scripts for multipath hashing on inner IP pkts when there
is a single GRE tunnel but there are multiple underlay routes to reach
the other end of the tunnel.
Four cases are covered in these scripts:
- IPv4 inner, IPv4 outer
- IPv6 inner, IPv4 outer
- IPv4 inner, IPv6 outer
- IPv6 inner, IPv6 outer
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Stephen Suryaputra <ssuryaextr@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Make the same support as commit 363887a2cd ("ipv4: Support multipath
hashing on inner IP pkts for GRE tunnel") for outer IPv6. The hashing
considers both IPv4 and IPv6 pkts when they are tunneled by IPv6 GRE.
Signed-off-by: Stephen Suryaputra <ssuryaextr@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 363887a2cd ("ipv4: Support multipath hashing on inner IP pkts
for GRE tunnel") supports multipath policy value of 2, Layer 3 or inner
Layer 3 if present, but it only considers inner IPv4. There is a use
case of IPv6 is tunneled by IPv4 GRE, thus add the ability to hash on
inner IPv6 addresses.
Fixes: 363887a2cd ("ipv4: Support multipath hashing on inner IP pkts for GRE tunnel")
Signed-off-by: Stephen Suryaputra <ssuryaextr@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The phy_dn variable is still being used in of_phy_connect() after the
of_node_put() call, which may result in use-after-free.
Fixes: 1dd2d06c04 ("net: Rework pasemi_mac driver to use of_mdio infrastructure")
Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: netdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
There is a possible use-after-free issue in the axienet_probe():
1701: np = of_parse_phandle(pdev->dev.of_node, "axistream-connected", 0);
1702: if (np) {
...
1787: of_node_put(np); ---> released here
1788: lp->eth_irq = platform_get_irq(pdev, 0);
1789: } else {
...
1801: }
1802: if (IS_ERR(lp->dma_regs)) {
...
1805: of_node_put(np); ---> double released here
1806: goto free_netdev;
1807: }
We solve this problem by removing the unnecessary of_node_put().
Fixes: 28ef9ebdb6 ("net: axienet: make use of axistream-connected attribute optional")
Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
Cc: Anirudha Sarangi <anirudh@xilinx.com>
Cc: John Linn <John.Linn@xilinx.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: Robert Hancock <hancock@sedsystems.ca>
Cc: netdev@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Reviewed-by: Robert Hancock <hancock@sedsystems.ca>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix endianness issue: passing a pointer to 64-bit fd as a 32-bit key
does not work on big-endian architectures. So cast fd to 32-bits when
necessary.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
DWMAC4 is capable to support clause 45 mdio communication.
This patch enable the feature on stmmac_mdio_write() and
stmmac_mdio_read() by following phy_write_mmd() and
phy_read_mmd() mdiobus read write implementation format.
Reviewed-by: Li, Yifan <yifan2.li@intel.com>
Signed-off-by: Kweh Hock Leong <hock.leong.kweh@intel.com>
Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: Voon Weifeng <weifeng.voon@intel.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use netif_ovs_is_port() function instead of open code.
This patch doesn't change logic.
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In this release cycle the number of NIC drivers using page_pool
will likely reach 4 drivers. It is about time to add a maintainer
entry. Add myself and Ilias.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Maxime Chevallier says:
====================
net: mvpp2: Add classification based on the ETHER flow
This series adds support for classification of the ETHER flow in the
mvpp2 driver.
The first patch allows detecting when a user specifies a flow_type that
isn't supported by the driver, while the second adds support for this
flow_type by adding the mapping between the ETHER_FLOW enum value and
the relevant classifier flow entries.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Users can specify classification actions based on the 'ether' flow type.
In that case, this will apply to all ethernet traffic, superseeding
flows such as 'udp4' or 'tcp6'.
Add support for this flow type in the PPv2 classifier, by mapping the
ETHER_FLOW value to the corresponding entries in the classifier.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a missing check to detect flow types that we don't support, so that
user can be informed of this.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If mmap() fails it returns MAP_FAILED, which is defined as ((void *) -1).
The current if-statement incorrectly tests if *ring is NULL.
Fixes: 358be65640 ("selftests/net: add txring_overwrite")
Signed-off-by: Frank de Brabander <debrabander@gmail.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stefano Garzarella says:
====================
vsock/virtio: several fixes in the .probe() and .remove()
During the review of "[PATCH] vsock/virtio: Initialize core virtio vsock
before registering the driver", Stefan pointed out some possible issues
in the .probe() and .remove() callbacks of the virtio-vsock driver.
This series tries to solve these issues:
- Patch 1 adds RCU critical sections to avoid use-after-free of
'the_virtio_vsock' pointer.
- Patch 2 stops workers before to call vdev->config->reset(vdev) to
be sure that no one is accessing the device.
- Patch 3 moves the works flush at the end of the .remove() to avoid
use-after-free of 'vsock' object.
v3:
- Patch 1: use rcu_dereference_protected() to get the_virtio_vosck value in
the virtio_vsock_probe() [Jason]
v2: https://patchwork.kernel.org/cover/11022343/
v1: https://patchwork.kernel.org/cover/10964733/
Before this series the guest crashes in a few second. After this series the
test runs (~12h) without issues.
Tested on an SMP guest (-smp 4 -monitor tcp:127.0.0.1:1234,server,nowait)
with these scripts to stress the .probe()/.remove() path:
- guest
while true; do
cat /dev/urandom | nc-vsock -l 4321 > /dev/null &
cat /dev/urandom | nc-vsock -l 5321 > /dev/null &
cat /dev/urandom | nc-vsock -l 6321 > /dev/null &
cat /dev/urandom | nc-vsock -l 7321 > /dev/null &
wait
done
- host
while true; do
cat /dev/urandom | nc-vsock 3 4321 > /dev/null &
cat /dev/urandom | nc-vsock 3 5321 > /dev/null &
cat /dev/urandom | nc-vsock 3 6321 > /dev/null &
cat /dev/urandom | nc-vsock 3 7321 > /dev/null &
sleep 2
echo "device_del v1" | nc 127.0.0.1 1234
sleep 1
echo "device_add vhost-vsock-pci,id=v1,guest-cid=3" | nc 127.0.0.1 1234
sleep 1
done
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch moves the flush of works after vdev->config->del_vqs(vdev),
because we need to be sure that no workers run before to free the
'vsock' object.
Since we stopped the workers using the [tx|rx|event]_run flags,
we are sure no one is accessing the device while we are calling
vdev->config->reset(vdev), so we can safely move the workers' flush.
Before the vdev->config->del_vqs(vdev), workers can be scheduled
by VQ callbacks, so we must flush them after del_vqs(), to avoid
use-after-free of 'vsock' object.
Suggested-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Before to call vdev->config->reset(vdev) we need to be sure that
no one is accessing the device, for this reason, we add new variables
in the struct virtio_vsock to stop the workers during the .remove().
This patch also add few comments before vdev->config->reset(vdev)
and vdev->config->del_vqs(vdev).
Suggested-by: Stefan Hajnoczi <stefanha@redhat.com>
Suggested-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Some callbacks used by the upper layers can run while we are in the
.remove(). A potential use-after-free can happen, because we free
the_virtio_vsock without knowing if the callbacks are over or not.
To solve this issue we move the assignment of the_virtio_vsock at the
end of .probe(), when we finished all the initialization, and at the
beginning of .remove(), before to release resources.
For the same reason, we do the same also for the vdev->priv.
We use RCU to be sure that all callbacks that use the_virtio_vsock
ended before freeing it. This is not required for callbacks that
use vdev->priv, because after the vdev->config->del_vqs() we are sure
that they are ended and will no longer be invoked.
We also take the mutex during the .remove() to avoid that .probe() can
run while we are resetting the device.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Benedikt Spranger says:
====================
Document the configuration of b53
this is the third round to document the configuration of a b53 supported
switch.
v3..v2:
- fix a typo
- improve b53 configuration in DSA_TAG_PROTO_NONE showcase.
- grade up from RFC to patch for mainline inclusion.
v1..v2:
- split out generic parts of the configuration.
- target comments by Andrew Lunn and Florian Fainelli.
- make changes visible to build system
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Document the different needs of documentation for the b53 driver.
Signed-off-by: Benedikt Spranger <b.spranger@linutronix.de>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Document DSA tagged and VLAN based switch configuration by showcases.
Signed-off-by: Benedikt Spranger <b.spranger@linutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix to return negative error code -EINVAL from the error handling
case instead of 0, as done elsewhere in this function.
Fixes: 1f35a56cf5 ("nfp: tls: add/delete TLS TX connections")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan says:
====================
bnxt_en: Add XDP_REDIRECT support.
This patch series adds XDP_REDIRECT support by Andy Gospodarek.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This removes contention over page allocation for XDP_REDIRECT actions by
adding page_pool support per queue for the driver. The performance for
XDP_REDIRECT actions scales linearly with the number of cores performing
redirect actions when using the page pools instead of the standard page
allocator.
v2: Fix up the error path from XDP registration, noted by Ilias Apalodimas.
Signed-off-by: Andy Gospodarek <gospo@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This adds basic support for XDP_REDIRECT in the bnxt_en driver. Next
patch adds the more optimized page pool support.
Signed-off-by: Andy Gospodarek <gospo@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
__bnxt_xmit_xdp() is used by XDP_TX and ethtool loopback packet transmit.
Refactor it so that it can be re-used by the XDP_REDIRECT logic.
Restructure the TX interrupt handler logic to cleanly separate XDP_TX
logic in preparation for XDP_REDIRECT.
Acked-by: Andy Gospodarek <gospo@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Renaming bnxt_xmit_xdp to __bnxt_xmit_xdp to get ready for XDP_REDIRECT
support and reduce confusion/namespace collision.
Signed-off-by: Andy Gospodarek <gospo@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ivan Khoronzhuk says:
====================
net: ethernet: ti: cpsw: Add XDP support
This patchset adds XDP support for TI cpsw driver and base it on
page_pool allocator. It was verified on af_xdp socket drop,
af_xdp l2f, ebpf XDP_DROP, XDP_REDIRECT, XDP_PASS, XDP_TX.
It was verified with following configs enabled:
CONFIG_JIT=y
CONFIG_BPFILTER=y
CONFIG_BPF_SYSCALL=y
CONFIG_XDP_SOCKETS=y
CONFIG_BPF_EVENTS=y
CONFIG_HAVE_EBPF_JIT=y
CONFIG_BPF_JIT=y
CONFIG_CGROUP_BPF=y
Link on previous v7:
https://lkml.org/lkml/2019/7/4/715
Also regular tests with iperf2 were done in order to verify impact on
regular netstack performance, compared with base commit:
https://pastebin.com/JSMT0iZ4
v8..v9:
- fix warnings on arm64 caused by typos in type casting
v7..v8:
- corrected dma calculation based on headroom instead of hard start
- minor comment changes
v6..v7:
- rolled back to v4 solution but with small modification
- picked up patch:
https://www.spinics.net/lists/netdev/msg583145.html
- added changes related to netsec fix and cpsw
v5..v6:
- do changes that is rx_dev while redirect/flush cycle is kept the same
- dropped net: ethernet: ti: davinci_cpdma: return handler status
- other changes desc in patches
v4..v5:
- added two plreliminary patches:
net: ethernet: ti: davinci_cpdma: allow desc split while down
net: ethernet: ti: cpsw_ethtool: allow res split while down
- added xdp alocator refcnt on xdp level, avoiding page pool refcnt
- moved flush status as separate argument for cpdma_chan_process
- reworked cpsw code according to last changes to allocator
- added missed statistic counter
v3..v4:
- added page pool user counter
- use same pool for ndevs in dual mac
- restructured page pool create/destroy according to the last changes in API
v2..v3:
- each rxq and ndev has its own page pool
v1..v2:
- combined xdp_xmit functions
- used page allocation w/o refcnt juggle
- unmapped page for skb netstack
- moved rxq/page pool allocation to open/close pair
- added several preliminary patches:
net: page_pool: add helper function to retrieve dma addresses
net: page_pool: add helper function to unmap dma addresses
net: ethernet: ti: cpsw: use cpsw as drv data
net: ethernet: ti: cpsw_ethtool: simplify slave loops
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add XDP support based on rx page_pool allocator, one frame per page.
Page pool allocator is used with assumption that only one rx_handler
is running simultaneously. DMA map/unmap is reused from page pool
despite there is no need to map whole page.
Due to specific of cpsw, the same TX/RX handler can be used by 2
network devices, so special fields in buffer are added to identify
an interface the frame is destined to. Thus XDP works for both
interfaces, that allows to test xdp redirect between two interfaces
easily. Also, each rx queue have own page pools, but common for both
netdevs.
XDP prog is common for all channels till appropriate changes are added
in XDP infrastructure. Also, once page_pool recycling becomes part of
skb netstack some simplifications can be added, like removing
page_pool_release_page() before skb receive.
In order to keep rx_dev while redirect, that can be somehow used in
future, do flush in rx_handler, that allows to keep rx dev the same
while redirect. It allows to conform with tracing rx_dev pointed
by Jesper.
Also, there is probability, that XDP generic code can be extended to
support multi ndev drivers like this one, using same rx queue for
several ndevs, based on switchdev for instance or else. In this case,
driver can be modified like exposed here:
https://lkml.org/lkml/2019/7/3/243
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
That's possible to set channel num while interfaces are down. When
interface gets up it should resplit budget. This resplit can happen
after phy is up but only if speed is changed, so should be set before
this, for this allow it to happen while changing number of channels,
when interfaces are down.
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
That's possible to set ring params while interfaces are down. When
interface gets up it uses number of descs to fill rx queue and on
later on changes to create rx pools. Usually, this resplit can happen
after phy is up, but it can be needed before this, so allow it to
happen while setting number of rx descs, when interfaces are down.
Also, if no dependency on intf state, move it to cpdma layer, where
it should be.
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
In case if dma mapped packet needs to be sent, like with XDP
page pool, the "mapped" submit can be used. This patch adds dma
mapped submit based on regular one.
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jesper recently removed page_pool_destroy() (from driver invocation)
and moved shutdown and free of page_pool into xdp_rxq_info_unreg(),
in-order to handle in-flight packets/pages. This created an asymmetry
in drivers create/destroy pairs.
This patch reintroduce page_pool_destroy and add page_pool user
refcnt. This serves the purpose to simplify drivers error handling as
driver now drivers always calls page_pool_destroy() and don't need to
track if xdp_rxq_info_reg_mem_model() was unsuccessful.
This could be used for a special cases where a single RX-queue (with a
single page_pool) provides packets for two net_device'es, and thus
needs to register the same page_pool twice with two xdp_rxq_info
structures.
This patch is primarily to ease API usage for drivers. The recently
merged netsec driver, actually have a bug in this area, which is
solved by this API change.
This patch is a modified version of Ivan Khoronzhuk's original patch.
Link: https://lore.kernel.org/netdev/20190625175948.24771-2-ivan.khoronzhuk@linaro.org/
Fixes: 5c67bf0ec4 ("net: netsec: Use page_pool API")
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Reviewed-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The frags_q is not properly initialized, it may result in illegal memory
access when conn_info is NULL.
The "goto free_exit" should be replaced by "goto exit".
Signed-off-by: Yang Wei <albin_yang@163.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When CONFIG_OF is disabled, we get a harmless warning about the
newly added variable:
drivers/net/ethernet/cadence/macb_main.c:48:39: error: 'mgmt' defined but not used [-Werror=unused-variable]
static struct sifive_fu540_macb_mgmt *mgmt;
Move the variable closer to its use inside of the #ifdef.
Fixes: c218ad5590 ("macb: Add support for SiFive FU540-C000")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
On unusual page sizes, we get harmless warnings:
drivers/net/ethernet/google/gve/gve_rx.c:283:6: error: unused variable 'pagecount' [-Werror,-Wunused-variable]
drivers/net/ethernet/google/gve/gve_rx.c:336:1: error: unused label 'have_skb' [-Werror,-Wunused-label]
Change the preprocessor #if to regular if() to avoid this.
Fixes: f5cedc84a3 ("gve: Add transmit and receive support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ben Hutchings says:
"This is the wrong place to change the queue mapping.
stmmac_xmit() is called with a specific TX queue locked,
and accessing a different TX queue results in a data race
for all of that queue's state.
I think this commit should be reverted upstream and in all
stable branches. Instead, the driver should implement the
ndo_select_queue operation and override the queue mapping there."
Fixes: c5acdbee22 ("net: stmmac: Send TSO packets always from Queue 0")
Suggested-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is only at notice level but it was pointed out that no other driver
does this.
Also there is no action the user can take as it is really a property of
the server.
Signed-off-by: Martin Habets <mhabets@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso says:
====================
Netfilter/IPVS updates for net-next
The following patchset contains Netfilter/IPVS updates for net-next:
1) Move bridge keys in nft_meta to nft_meta_bridge, from wenxu.
2) Support for bridge pvid matching, from wenxu.
3) Support for bridge vlan protocol matching, also from wenxu.
4) Add br_vlan_get_pvid_rcu(), to fetch the bridge port pvid
from packet path.
5) Prefer specific family extension in nf_tables.
6) Autoload specific family extension in case it is missing.
7) Add synproxy support to nf_tables, from Fernando Fernandez Mancera.
8) Support for GRE encapsulation in IPVS, from Vadim Fedorenko.
9) ICMP handling for GRE encapsulation, from Julian Anastasov.
10) Remove unused parameter in nf_queue, from Florian Westphal.
11) Replace seq_printf() by seq_puts() in nf_log, from Markus Elfring.
12) Rename nf_SYNPROXY.h => nf_synproxy.h before this header becomes
public.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
cd1973a921 ("net: netsec: Sync dma for device on buffer allocation")
was merged on it's v1 instead of the v3.
Merge the proper patch version
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Bash completion for proposing the "loadall" subcommand is missing. Let's
add it to the completion script.
Add a specific case to propose "load" and "loadall" for completing:
$ bpftool prog load
^ cursor is here
Otherwise, completion considers that $command is in load|loadall and
starts making related completions (file or directory names, as the
number of words on the command line is below 6), when the only suggested
keywords should be "load" and "loadall" until one has been picked and a
space entered after that to move to the next word.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
