2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-23 12:43:55 +08:00
Commit Graph

471 Commits

Author SHA1 Message Date
Biju Das
9b6782e7f0 of: Add vendor prefix for iWave Systems Technologies Pvt. Ltd
This patch adds vendor prefix for iWave Systems Technologies Pvt. Ltd.
Website: http://www.iwavesystems.com/

Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Chris Paterson <chris.paterson2@renesas.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Rob Herring <robh@kernel.org>
2017-06-15 20:42:40 -05:00
Marcus Cooper
a2b3cf0709 devicetree: add Roofull vendor prefix
Add the "roofull" vendor prefix for Shenzhen Roofull Technology Co, Ltd.

Signed-off-by: Marcus Cooper <codekipper@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
2017-05-15 16:49:55 -05:00
Marcus Cooper
97a0268e76 devicetree: add Itead vendor prefix
Add the "itead" vendor prefix for ITEAD Intelligent Systems Co.Ltd.

Signed-off-by: Marcus Cooper <codekipper@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
2017-05-15 16:49:55 -05:00
Sean Wang
79d45aed23 dt-bindings: add vendor prefix for bananapi
Add BIPAI KEJI LIMITED which is a company dedicating to design and
manufacture bananapi open hardware.

Website: http://www.banana-pi.org/

Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Rob Herring <robh@kernel.org>
2017-05-15 16:49:54 -05:00
Linus Torvalds
556d994a75 RTC for 4.12
Subsystem:
  - Add OF device ID table for i2c drivers
 
 New driver:
  - Motorola CPCAP PMIC RTC
 
 Drivers:
  - cmos: fix IRQ selection
  - ds1307: Add ST m41t0 support
  - ds1374: fix watchdog configuration
  - sh: Add rza series support
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEXx9Viay1+e7J/aM4AyWl4gNJNJIFAlkTf2sACgkQAyWl4gNJ
 NJLPvw//dGzo6oD3C96QIurfrgFx9512ZurEiJpGPIO15obTVLF0SNuswaMj7knm
 ezqQ23qX9VBEmu3si7LvkQVbE60giB3XnlJ/wpFi/LhtlM7SQ4o2Z8Go3rkL8tCw
 iPcj5l3ShbHgSF+TBK+jK5C/8ahR7RE32l2rtSi9xwzxOmKRySmSWg2iGmGJMNUU
 7UHR4DRHVPS/h1ffM/rOWV+d3GVK9laNmeoIORhsWCa+iYwGRZr3XL3GXQzhehBO
 H5uFYewMVBHREADiqMNQ/ogHZI+ghXt1OSK7vhUFkYxosqU56P0YtU6SPH6UuFsH
 ryoiUmCgQQjjhptlvVv71D7Wj1txSCT6rByQU1YyVZ0yw9XpVuGTYBjFBY+D7nxb
 e3sR+Poe3diVLWDwFTXStrY0TtVlCTTCjs5T2kwUdYOJ188expQGHgj6wVl7PPTs
 gpeSIunekbop13KCPWV01TzmRLB8ne9ZiomsuiNnuAKhXP7KRf6AfuQd6kpyvpmH
 vhGcEIe7O0i4TwUIuB/dmdhLHmlOqCpLJpGQihNc+f0jJAxHv+akXEQ06H84FkJD
 kPkBYSVDp/2pEBdf7ig2mlpPEqANgoQY8GCu9SbEg976g0v8k6m+i9IlbR0m7hwE
 0XF+8W45iNsaEIzoXcyHuB/lrUy1/0eNoG4KX8vyWIjITo5HQWg=
 =40TA
 -----END PGP SIGNATURE-----

Merge tag 'rtc-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux

Pull RTC updates from Alexandre Belloni:
 "RTC subsystem update:
   - Add OF device ID table for i2c drivers

  New RTC driver:
   - Motorola CPCAP PMIC RTC

  RTC driver updates:
   - cmos: fix IRQ selection
   - ds1307: Add ST m41t0 support
   - ds1374: fix watchdog configuration
   - sh: Add rza series support"

* tag 'rtc-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (33 commits)
  rtc: gemini: add return value validation
  rtc: snvs: fix an incorrect check of return value
  rtc: ds1374: wdt: Fix stop/start ioctl always returning -EINVAL
  rtc: ds1374: wdt: Fix issue with timeout scaling from secs to wdt ticks
  rtc: sh: mark PM functions as unused
  rtc: hid-sensor-time: remove some dead code
  rtc: m41t80: Add proper compatible for rv4162
  rtc: ds1307: Add m41t0 to OF device ID table
  rtc: ds1307: support m41t0 variant
  rtc: cpcap: fix improper use of IRQ_NONE for request_threaded_irq
  rtc: cmos: Do not assume irq 8 for rtc when there are no legacy irqs
  x86: i8259: export legacy_pic symbol
  dt-bindings: rtc: document the rtc-sh bindings
  rtc: sh: add support for rza series
  rtc: cpcap: kfreeing devm allocated memory
  rtc: wm8350: Remove unused to_wm8350_from_rtc_dev
  rtc: cpcap: new rtc driver
  dt-bindings: Add vendor prefix for Motorola
  rtc: omap: mark PM methods as __maybe_unused
  rtc: omap: remove incorrect __exit markups
  ...
2017-05-10 19:37:14 -07:00
Linus Torvalds
a2d9214c73 TEE driver infrastructure and OP-TEE drivers
This branch introduces a generic TEE framework in the kernel, to handle
 trusted environemtns (security coprocessor or software implementations
 such as OP-TEE/TrustZone). I'm sending it separately from the other
 arm-soc driver changes to give it a little more visibility, once
 the subsystem is merged, we will likely keep this in the arm₋soc
 drivers branch or have the maintainers submit pull requests directly,
 depending on the patch volume.
 
 I have reviewed earlier versions in the past, and have reviewed
 the latest version in person during Linaro Connect BUD17.
 
 Here is my overall assessment of the subsystem:
 
 * There is clearly demand for this, both for the generic
   infrastructure and the specific OP-TEE implementation.
 
 * The code has gone through a large number of reviews,
   and the review comments have all been addressed, but
   the reviews were not coming up with serious issues any more
   and nobody volunteered to vouch for the quality.
 
 * The user space ioctl interface is sufficient to work with the
   OP-TEE driver, and it should in principle work with other
   TEE implementations that follow the GlobalPlatform[1] standards,
   but it might need to be extended in minor ways depending on
   specific requirements of future TEE implementations
 
 * The main downside of the API to me is how the user space
   is tied to the TEE implementation in hardware or firmware,
   but uses a generic way to communicate with it. This seems
   to be an inherent problem with what it is trying to do,
   and I could not come up with any better solution than what
   is implemented here.
 
 For a detailed history of the patch series, see
 https://lkml.org/lkml/2017/3/10/1277
 
 Conflicts: needs a fixup after the drm tree was merged, see
 https://patchwork.kernel.org/patch/9691679/
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIVAwUAWRIRzWCrR//JCVInAQLKUhAAiJaBqb4uv5wDWKw8MVV5BbFjq6po/eMK
 r3lgwyBGoRnrYiXo0z2eYNqpHsmNIGrL21qYMzaBGhVeaOOVPZT4q3zH+Se9Oo+J
 HHZZ4J6Q9kDIUy9WkM7ybHVj3C0kQIn7H+/6zi2L97tMQJMZHI0jCSgDa6XPqHzh
 G/vqVx5jlaFj6SvkLR0L0yWTe0wXTHoyObSCWsM/nV8AiTNhMD3kcTEOm0XHcAJB
 k8ei/Pw2INOFZu1B0xpoRkWoAo6YKMcxQp9kiMkcEhChPIkNK+8+npYJ3fiogsii
 BVTXC9Km2jmUfQ21Pegd2XbqzNGU1rJSdHGTyK2Oax+0J+C8xElGMs8U9tqXPqun
 fWkSp0dl7Sk0f9Yhc8JBD1Tsbuo0H+TsMtQ6RNvlxLiNHE/5/bZBCeylvtoUyI+m
 NcvP0x5QeBmkitz7zhYpjaSv5HjZG3PPO3pfaz0Stmen5ZM8DWB1TaS1Nn9MigHt
 RGXlafc6dKybQQBLWDwStv7IkqDRYte+7pwmx+QFCRWj8+uFtTCDPLyaDUTwlErL
 n4ztUL1RWiq48S+yJDJURM4mLpEMnJFFF4tiiHH8eUe2JE+CXwGxkT6BG62W71Oy
 RosiJ84LmdoHRyHx6xmqpoDcL1WG57IgWt05SRUkQatA/ealGX88gguGEAWsPL0h
 cnKPYkiYfug=
 =VzpB
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-tee' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull TEE driver infrastructure and OP-TEE drivers from Arnd Bergmann:
 "This introduces a generic TEE framework in the kernel, to handle
  trusted environemtns (security coprocessor or software implementations
  such as OP-TEE/TrustZone). I'm sending it separately from the other
  arm-soc driver changes to give it a little more visibility, once the
  subsystem is merged, we will likely keep this in the arm₋soc drivers
  branch or have the maintainers submit pull requests directly,
  depending on the patch volume.

  I have reviewed earlier versions in the past, and have reviewed the
  latest version in person during Linaro Connect BUD17.

  Here is my overall assessment of the subsystem:

   - There is clearly demand for this, both for the generic
     infrastructure and the specific OP-TEE implementation.

   - The code has gone through a large number of reviews, and the review
     comments have all been addressed, but the reviews were not coming
     up with serious issues any more and nobody volunteered to vouch for
     the quality.

   - The user space ioctl interface is sufficient to work with the
     OP-TEE driver, and it should in principle work with other TEE
     implementations that follow the GlobalPlatform[1] standards, but it
     might need to be extended in minor ways depending on specific
     requirements of future TEE implementations

   - The main downside of the API to me is how the user space is tied to
     the TEE implementation in hardware or firmware, but uses a generic
     way to communicate with it. This seems to be an inherent problem
     with what it is trying to do, and I could not come up with any
     better solution than what is implemented here.

  For a detailed history of the patch series, see

    https://lkml.org/lkml/2017/3/10/1277"

* tag 'armsoc-tee' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  arm64: dt: hikey: Add optee node
  Documentation: tee subsystem and op-tee driver
  tee: add OP-TEE driver
  tee: generic TEE subsystem
  dt/bindings: add bindings for optee
2017-05-10 11:20:09 -07:00
Linus Torvalds
c6778ff813 ARM: 64-bit DT updates
Device-tree updates for arm64 platforms. Just as with 32-bit, a bunch of smaller
 changes, but also some new platforms that are worth mentioning:
 
  * Rockchip RK3399 platforms for Chromebooks, including Samsung Chromebook
    Plus (Kevin)
  * Orange Pi PC2 (Allwinner H5)
  * Freescale LS2088A and LS1088A SoCs
  * Expanded support for Nvidia Tegra186 (and Jetson TX2)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJZEA5TAAoJEIwa5zzehBx3uPwP/3NBPKvsDQha/x+PPgtSM1cM
 pUEF1fxsLftrt+pUeRgMZqGE2xu5vVUKEQsr7KDdWMS9LMs50Pp9dTvfxr7A4Asm
 WRRMR7Y3gPbr49uf4+JLLmn0hYXTeaoUftVneBj0qU9Flwe3mQDVULiRjPalWYVB
 g0+NwkPE2lrqrudceA2HiVEXqNlVXCIh2mdMaC7Luo0VEsz7nRHT0TOGPaxnXB3M
 NoJ56FPHtv3x9+C56B5CLJ/+Ya8SLgfqVwwoK8FgoqDzEF3nbhf/WCUyph+gHdP3
 D+jMk7t0tvIW8Ne4TGXenoxBznZxgh5ObpLlKBKPCGJkKxpfuq9koH33MmY/WoUN
 7uh3F3HI2sGr7tY/xaN8H7a9A4mHzipj8nqaAsjAJppIpioecGCFVtkY5q0jfxLC
 aAc1o4zoimdPs9q9mu/qhgKNxWkoTYnwvtWHuwqEOggvSb1ulS1SPS24VkKrc4LI
 XMGbA4mQOuFwZyG4FVfvWzbnhsHzDh4cgHaVGra6z5zoX1MUrvieCWEji+Ul1VWa
 lUJ2sTilvSGkwjGcMUSki5p9GcU8dPXwqKiZqDuGx6Ps4aQsw0vz286BnBeVsusG
 qLRH4nkqbF9xCEz9h71mcU6WMu17EsG9zMoCg5K4EZ+RIG3cgWq0dMWW1LqtRn7S
 2YqayY3+UEyMPN146R1V
 =q3Ix
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM 64-bit DT updates from Olof Johansson:
 "Device-tree updates for arm64 platforms. Just as with 32-bit, a bunch
  of smaller changes, but also some new platforms that are worth
  mentioning:

   - Rockchip RK3399 platforms for Chromebooks, including Samsung
     Chromebook Plus (Kevin)

   - Orange Pi PC2 (Allwinner H5)

   - Freescale LS2088A and LS1088A SoCs

   - Expanded support for Nvidia Tegra186 (and Jetson TX2)"

* tag 'armsoc-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (180 commits)
  arm64: dts: Add basic DT to support Spreadtrum's SP9860G
  arm64: dts: exynos: Use - instead of @ for DT OPP entries
  arm64: dts: exynos: Add support for s6e3hf2 panel device on TM2e board
  arm64: dts: juno: add information about L1 and L2 caches
  arm64: dts: juno: fix few unit address format warnings
  arm64: marvell: dts: enable the crypto engine on the Armada 8040 DB
  arm64: marvell: dts: enable the crypto engine on the Armada 7040 DB
  arm64: marvell: dts: add crypto engine description for 7k/8k
  arm64: dts: marvell: add sdhci support for Armada 7K/8K
  arm64: dts: marvell: add eMMC support for Armada 37xx
  arm64: dts: hisi: add pinctrl dtsi file for HiKey960 development board
  arm64: dts: hisi: add drive strength levels of the pins for Hi3660 SoC
  arm64: dts: hisi: enable the NIC and SAS for the hip07-d05 board
  arm64: dts: hisi: add SAS nodes for the hip07 SoC
  arm64: dts: hisi: add RoCE nodes for the hip07 SoC
  arm64: dts: hisi: add network related nodes for the hip07 SoC
  arm64: dts: hisi: add mbigen nodes for the hip07 SoC
  arm64: dts: rockchip: fix the memory size of PX5 Evaluation board
  arm64: dts: hisilicon: add dts files for hi3798cv200-poplar board
  dt-bindings: arm: hisilicon: add bindings for hi3798cv200 SoC and Poplar board
  ...
2017-05-09 10:07:33 -07:00
Linus Torvalds
3ef2bc099d DeviceTree for 4.12:
- Fix sparse warnings in drivers/of/.
 
 - Add more overlay unittests.
 
 - Update dtc to v1.4.4-8-g756ffc4f52f6. This adds more checks on dts
 files such as unit-address formatting and stricter character sets for
 node and property names.
 
 - Add a common DT modalias function.
 
 - Move trivial-devices.txt up and out of i2c dir.
 
 - ARM NVIC interrupt controller binding.
 
 - Vendor prefixes for Sensirion, Dioo, Nordic, ROHM.
 
 - Correct some binding file locations.
 -----BEGIN PGP SIGNATURE-----
 
 iQItBAABCAAXBQJZDM+bEBxyb2JoQGtlcm5lbC5vcmcACgkQ+vtdtY28YcM7Yw/+
 NPgcfP2iFXWTC/D54neh/QliH7n5jO1YILQOd5ZJulTaKVCv1sNf4JCFVDQO/vuO
 592f2jq/blhhh8yKrH0uzHvTADYO7G+XEv3D64Lu/MpmnBHTjut9WeG5h8SZWJD+
 jGoz3Kx+Cmgxh/w1Ud/fh2qO3T0Es74TH+Ovi/AfpiywiYD8AqMlw0Tk+UtMRb12
 NsihgiYXo8nT/BKe9aOFxOJjV9Pp+pSmyX5Mu2IdOtLnl0MXk5Rvn0mXLU2/oN5n
 MONTyielvLB9opxaaSeSBadv3iXcVTagH6MinYjeQRwsLGWDy2YzxLccC/jBkyR5
 v8X/IJtpivUzCm3ji+mFEKje5u5c+N3ZLhKmTkeyNBJGwrnD7zj0gVcM5GGdK5aW
 Q4exqECklSgmpiCvlL1KWyXi3QsgMuu/wbsv5H5PgDe1wgMAtfKPrIm4kPpbLpW2
 Dp+scFfL1v9drfvbcEum6PNw2/EGZY/okaRlcr0zFn8eMsa+yBlPBIXNLzzO7arp
 6/lU6O5jDaSFRVKeKZ4qYSsc3GvN81XV+d9go6R3WR964xK4JdEkyt9Hntr1H0Hh
 lBwyhSWH4nWnsXunc4GepRPVw+cdnOQdrj6T68bqLM5Gd6XWjh88WIDXqLynH6Kn
 OBBBP/lOD7Su3antNkjnlaX9TP6BF8rNQePWne3AzzA=
 =ca1M
 -----END PGP SIGNATURE-----

Merge tag 'devicetree-for-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

Pull DeviceTree updates from Rob Herring:

 - fix sparse warnings in drivers/of/

 - add more overlay unittests

 - update dtc to v1.4.4-8-g756ffc4f52f6. This adds more checks on dts
   files such as unit-address formatting and stricter character sets for
   node and property names

 - add a common DT modalias function

 - move trivial-devices.txt up and out of i2c dir

 - ARM NVIC interrupt controller binding

 - vendor prefixes for Sensirion, Dioo, Nordic, ROHM

 - correct some binding file locations

* tag 'devicetree-for-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (24 commits)
  of: fix sparse warnings in fdt, irq, reserved mem, and resolver code
  of: fix sparse warning in of_pci_range_parser_one
  of: fix sparse warnings in of_find_next_cache_node
  of/unittest: Missing unlocks on error
  of: fix uninitialized variable warning for overlay test
  of: fix unittest build without CONFIG_OF_OVERLAY
  of: Add unit tests for applying overlays
  of: per-file dtc compiler flags
  fpga: region: add missing DT documentation for config complete timeout
  of: Add vendor prefix for ROHM Semiconductor
  of: fix "/cpus" reference leak in of_numa_parse_cpu_nodes()
  of: Add vendor prefix for Nordic Semiconductor
  dt-bindings: arm,nvic: Binding for ARM NVIC interrupt controller on Cortex-M
  dtc: update warning settings for new bus and node/property name checks
  scripts/dtc: Update to upstream version v1.4.4-8-g756ffc4f52f6
  scripts/dtc: automate getting dtc version and log in update script
  of: Add function for generating a DT modalias with a newline
  of: fix of_device_get_modalias returned length when truncating buffers
  Documentation: devicetree: move trivial-devices out of I2C realm
  dt-bindings: add vendor prefix for Dioo
  ..
2017-05-05 19:33:07 -07:00
Linus Torvalds
2bd8040174 This is the bulk of GPIO changes for the v4.12 kernel cycle:
Core changes
 
 - Return NULL from gpiod_get_optional() when GPIOLIB is disabled.
   This was a much discussed change. It affects use cases where people
   write drivers that might or might not be using GPIO resources.
   I have decided that this is the lesser evil right now.
 
 - Make gpiod_count() behave consistently across different hardware
   descriptions.
 
 - Fix the syntax around open drain/open source to not infer active
   high/low semantics.
 
 New drivers
 
 - A new single-register fixed-direction framework driver for hardware
   that have lines controlled by a single register that just work in
   one direction (out or in), including IRQ support.
 
 - Support the Fintek F71889A GPIO SuperIO controller.
 
 - Support the National NI 169445 MMIO GPIO.
 
 - Support for the X-Gene derivative of the DWC GPIO controller
 
 - Support for the Rohm BD9571MWV-M PMIC GPIO controller.
 
 - Refactor the Gemini GPIO driver to a generic Faraday FTGPIO driver
   and replace both the Gemini and the Moxa ART custom drivers with
   this driver.
 
 Driver improvements
 
 - A whole slew of drivers have their spinlocks chaned to raw spinlocks
   as they provide irqchips, and thus we are progressing on realtime
   compliance.
 
 - Use devm_irq_alloc_descs() in a slew of drivers, getting managed
   resources.
 
 - Support for the embedded PWM controller inside the MVEBU driver.
 
 - Debounce, open source and open drain support for the Aspeed driver.
 
 - Misc smaller fixes like spelling and syntax and whatnot.
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJZCusBAAoJEEEQszewGV1zengP/i3YgmSXJdaf26t/NxG3klU3
 qx3akdQ3gEQ6BOlIY7Ew+b6qgMJynYNZa1trZgqTgLxPEKWjidyCgz+LHQ0OY+ir
 a7x6wr+gBj5WlgV+nBjVs4l6W8pVKCfnap/04OPEQDpxZOHs2LU5pqxxUZ9AxkKS
 urDFMDX55baFviQ+xAuHgamok87YoGP36A/e/fHIBepZmnochf0mCcPfIh0t8lRh
 s2x29PN5ZFRkl403RzjZfVCEMr9bMnSqmDquvPO++Kq0bL+3rOhuMErocd1Bg8ao
 LxBktkryujTaw699xK7Rq5SwcnOAPpaBY4NTmwsIJvAJuCh7qLy9JxQSBsSOT2bx
 61NWUt5T/Xsi0ECYZM4YvsNpUP6XrpSTyG3c8T3fY9vXYLNKZBv1ht6OODpLeuke
 DxULAWP+DdzUS8a3qfKQvIJzSTloU31a1MBG58DWNJ072EQfa2YNaVE75VQk/z5/
 0xZbSHdPY/0Xgx8ltpKu37bSO676JiVQZZ1HEAuti4h21+USYueYD2L8/Bx4k9e/
 4UaOcw3MaCDHP/sf5hg17kQBjhhS0lV9Zv6H9QbHZUocJTJlIU+vXtgkQlrfi3n8
 8j5m+ywVarmLtPqg1j2rqcw7LBCPe0qRXH3e5X/YmNMc3rH9bQz4cTo8ZSN9r8zS
 c17zGbbAqlGsBkpFAbQz
 =DGPb
 -----END PGP SIGNATURE-----

Merge tag 'gpio-v4.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

Pull GPIO updates from Linus Walleij:
 "This is the bulk of GPIO changes for the v4.12 kernel cycle.

  Core changes:

   - Return NULL from gpiod_get_optional() when GPIOLIB is disabled.
     This was a much discussed change. It affects use cases where people
     write drivers that might or might not be using GPIO resources. I
     have decided that this is the lesser evil right now.

   - Make gpiod_count() behave consistently across different hardware
     descriptions.

   - Fix the syntax around open drain/open source to not infer active
     high/low semantics.

  New drivers:

   - A new single-register fixed-direction framework driver for hardware
     that have lines controlled by a single register that just work in
     one direction (out or in), including IRQ support.

   - Support the Fintek F71889A GPIO SuperIO controller.

   - Support the National NI 169445 MMIO GPIO.

   - Support for the X-Gene derivative of the DWC GPIO controller

   - Support for the Rohm BD9571MWV-M PMIC GPIO controller.

   - Refactor the Gemini GPIO driver to a generic Faraday FTGPIO driver
     and replace both the Gemini and the Moxa ART custom drivers with
     this driver.

  Driver improvements:

   - A whole slew of drivers have their spinlocks chaned to raw
     spinlocks as they provide irqchips, and thus we are progressing on
     realtime compliance.

   - Use devm_irq_alloc_descs() in a slew of drivers, getting managed
     resources.

   - Support for the embedded PWM controller inside the MVEBU driver.

   - Debounce, open source and open drain support for the Aspeed driver.

   - Misc smaller fixes like spelling and syntax and whatnot"

* tag 'gpio-v4.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (77 commits)
  gpio: f7188x: Add a missing break
  gpio: omap: return error if requested debounce time is not possible
  gpio: Add ROHM BD9571MWV-M PMIC GPIO driver
  gpio: gpio-wcove: fix GPIO IRQ status mask
  gpio: DT bindings, move tca9554 from pcf857x to pca953x
  gpio: move tca9554 from pcf857x to pca953x
  gpio: arizona: Correct check whether the pin is an input
  gpio: Add XRA1403 DTS binding documentation
  dt-bindings: add exar to vendor prefixes list
  gpio: gpio-wcove: fix irq pending status bit width
  gpio: dwapb: use dwapb_read instead of readl_relaxed
  gpio: aspeed: Add open-source and open-drain support
  gpio: aspeed: Add debounce support
  gpio: aspeed: dt: Add optional clocks property
  gpio: aspeed: dt: Fix description alignment in bindings document
  gpio: mvebu: Add limited PWM support
  gpio: Use unsigned int for interrupt numbers
  gpio: f7188x: Add F71889A GPIO support.
  gpio: core: Decouple open drain/source flag with active low/high
  gpio: arizona: Correct handling for reading input GPIOs
  ...
2017-05-04 12:05:32 -07:00
Linus Torvalds
2f34c1231b main drm pull request for 4.12 kernel
-----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJZCTzvAAoJEAx081l5xIa+9kcQAJsQiija4/7QGx6IzakOMqjx
 WulJ3zYG/cU/HLwCBcuWRDF6wAj+7iWNeLCPmolHwEazcI8tQVdgMlWtbdMbDh8U
 ckzD3FBXsEVfIfab+u6tyoUkm3l/VDhMXbjkUK7NTo/+dkRqe5LuFfZPCGN09jft
 Y+5salkRXzDhXPSFsqmjfzhx1v7PTgf0a5HUenKWEWOv+sJQaW4/iPvcDSIcg5qR
 l9WjAqro1NpFYhUodnh6DkLeledL1U5whdtp/yvrUAck8y+WP/jwGYmQ7pZ0UkQm
 f0M3kV6K67ox9eqN++jsGX5o8sB1qF01Uh95kBAnyzYzsw4ZlMCx6pV7PDX+J88M
 UBNMEqX10hrLkNJA9lGjPWx+/6fudcwg9anKvTRO3Uyx7MbYoJAgjzAM+yBqqtV0
 8Otxa4Bw0V2pmUD+0lqJDERRvE77VCXkLb8SaI5lQo0MHpQqT2cZA+GD+B+rZHO6
 Ie5LDFY87vM2GG1IECufG+xOa3v6sn2FfQ1ouu1KNGKOAMBKcQCQyQx3kGVuNW2i
 HDACVXALJgXdRlVLm4jydOCZdRoguX7AWmRjtdwxgaO+lBcGfLhkXdjLQ7Ho+29p
 32ArJfkZPfA53vMB6lHxAfbtrs1q2RzyVnPHj/KqeJnGZbABKTsF2HQ5BQc4Xq/J
 mqXoz6Oubdvk4Pwyx7Ne
 =UxFF
 -----END PGP SIGNATURE-----

Merge tag 'drm-for-v4.12' of git://people.freedesktop.org/~airlied/linux

Pull drm u pdates from Dave Airlie:
 "This is the main drm pull request for v4.12. Apart from two fixes
  pulls, everything should have been in drm-next for at least 2 weeks.

  The biggest thing in here is AMD released the public headers for their
  upcoming VEGA GPUs. These as always are quite a sizeable chunk of
  header files. They've also added initial non-display support for those
  GPUs, though they aren't available in production yet.

  Otherwise it's pretty much normal.

  New bridge drivers:
   - megachips-stdpxxxx-ge-b850v3-fw LVDS->DP++
   - generic LVDS bridge support.

  Core:
   - Displayport link train failure reporting to userspace
   - debugfs interface cleaned up
   - subsystem TODO in kerneldoc now
   - Extended fbdev support (flipping and vblank wait)
   - drm_platform removed
   - EDP CRC support in helper
   - HF-VSDB SCDC support in EDID parser
   - Lots of code cleanups and header extraction
   - Thunderbolt external GPU awareness
   - Atomic helper improvements
   - Documentation improvements

  panel:
   - Sitronix and Samsung new panel support

  amdgpu:
   - Preliminary vega10 support
   - Multi-level page table support
   - GPU sensor support for userspace
   - PRT support for sparse buffers
   - SR-IOV improvements
   - Non-contig VRAM CPU mapping

  i915:
   - Atomic modesetting enabled by default on Gen5+
   - LSPCON improvements
   - Atomic state handling for cdclk
   - GPU reset improvements
   - In-kernel unit tests
   - Geminilake improvements and color manager support
   - Designware i2c fixes
   - vblank evasion improvements
   - Hotplug safe connector iterators
   - GVT scheduler QoS support
   - GVT Kabylake support

  nouveau:
   - Acceleration support for Pascal (GP10x).
   - Rearchitecture of code handling proprietary signed firmware
   - Fix GTX 970 with odd MMU configuration
   - GP10B support
   - GP107 acceleration support

  vmwgfx:
   - Atomic modesetting support for vmwgfx

  omapdrm:
   - Support for render nodes
   - Refactor omapdss code
   - Fix some probe ordering issues
   - Fix too dark RGB565 rendering

  sunxi:
   - prelim rework for multiple pipes.

  mali-dp:
   - Color management support
   - Plane scaling
   - Power management improvements

  imx-drm:
   - Prefetch Resolve Engine/Gasket on i.MX6QP
   - Deferred plane disabling
   - Separate alpha support

  mediatek:
   - Mediatek SoC MT2701 support

  rcar-du:
   - Gen3 HDMI support

  msm:
   - 4k support for newer chips
   - OPP bindings for gpu
   - prep work for per-process pagetables

  vc4:
   - HDMI audio support
   - fixes

  qxl:
   - minor fixes.

  dw-hdmi:
   - PHY improvements
   - CSC fixes
   - Amlogic GX SoC support"

* tag 'drm-for-v4.12' of git://people.freedesktop.org/~airlied/linux: (1778 commits)
  drm/nouveau/fb/gf100-: Fix 32 bit wraparound in new ram detection
  drm/nouveau/secboot/gm20b: fix the error return code in gm20b_secboot_tegra_read_wpr()
  drm/nouveau/kms: Increase max retries in scanout position queries.
  drm/nouveau/bios/bitP: check that table is long enough for optional pointers
  drm/nouveau/fifo/nv40: no ctxsw for pre-nv44 mpeg engine
  drm: mali-dp: use div_u64 for expensive 64-bit divisions
  drm/i915: Confirm the request is still active before adding it to the await
  drm/i915: Avoid busy-spinning on VLV_GLTC_PW_STATUS mmio
  drm/i915/selftests: Allocate inode/file dynamically
  drm/i915: Fix system hang with EI UP masked on Haswell
  drm/i915: checking for NULL instead of IS_ERR() in mock selftests
  drm/i915: Perform link quality check unconditionally during long pulse
  drm/i915: Fix use after free in lpe_audio_platdev_destroy()
  drm/i915: Use the right mapping_gfp_mask for final shmem allocation
  drm/i915: Make legacy cursor updates more unsynced
  drm/i915: Apply a cond_resched() to the saturated signaler
  drm/i915: Park the signaler before sleeping
  drm: mali-dp: Check the mclk rate and allow up/down scaling
  drm: mali-dp: Enable image enhancement when scaling
  drm: mali-dp: Add plane upscaling support
  ...
2017-05-03 11:44:24 -07:00
Linus Torvalds
8d65b08deb Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Millar:
 "Here are some highlights from the 2065 networking commits that
  happened this development cycle:

   1) XDP support for IXGBE (John Fastabend) and thunderx (Sunil Kowuri)

   2) Add a generic XDP driver, so that anyone can test XDP even if they
      lack a networking device whose driver has explicit XDP support
      (me).

   3) Sparc64 now has an eBPF JIT too (me)

   4) Add a BPF program testing framework via BPF_PROG_TEST_RUN (Alexei
      Starovoitov)

   5) Make netfitler network namespace teardown less expensive (Florian
      Westphal)

   6) Add symmetric hashing support to nft_hash (Laura Garcia Liebana)

   7) Implement NAPI and GRO in netvsc driver (Stephen Hemminger)

   8) Support TC flower offload statistics in mlxsw (Arkadi Sharshevsky)

   9) Multiqueue support in stmmac driver (Joao Pinto)

  10) Remove TCP timewait recycling, it never really could possibly work
      well in the real world and timestamp randomization really zaps any
      hint of usability this feature had (Soheil Hassas Yeganeh)

  11) Support level3 vs level4 ECMP route hashing in ipv4 (Nikolay
      Aleksandrov)

  12) Add socket busy poll support to epoll (Sridhar Samudrala)

  13) Netlink extended ACK support (Johannes Berg, Pablo Neira Ayuso,
      and several others)

  14) IPSEC hw offload infrastructure (Steffen Klassert)"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2065 commits)
  tipc: refactor function tipc_sk_recv_stream()
  tipc: refactor function tipc_sk_recvmsg()
  net: thunderx: Optimize page recycling for XDP
  net: thunderx: Support for XDP header adjustment
  net: thunderx: Add support for XDP_TX
  net: thunderx: Add support for XDP_DROP
  net: thunderx: Add basic XDP support
  net: thunderx: Cleanup receive buffer allocation
  net: thunderx: Optimize CQE_TX handling
  net: thunderx: Optimize RBDR descriptor handling
  net: thunderx: Support for page recycling
  ipx: call ipxitf_put() in ioctl error path
  net: sched: add helpers to handle extended actions
  qed*: Fix issues in the ptp filter config implementation.
  qede: Fix concurrency issue in PTP Tx path processing.
  stmmac: Add support for SIMATIC IOT2000 platform
  net: hns: fix ethtool_get_strings overflow in hns driver
  tcp: fix wraparound issue in tcp_lp
  bpf, arm64: fix jit branch offset related to ldimm64
  bpf, arm64: implement jiting of BPF_XADD
  ...
2017-05-02 16:40:27 -07:00
Nandor Han
7b7df5204d dt-bindings: add exar to vendor prefixes list
Add Exar Corporation to vendors list.

Signed-off-by: Nandor Han <nandor.han@ge.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-04-24 15:18:42 +02:00
Marek Vasut
6b12e71dd4 of: Add vendor prefix for ROHM Semiconductor
ROHM Semiconductor Co., Ltd. offer PMICs, touchscreen controllers etc.
http://www.rohm.com/web/global/

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Rob Herring <robh@kernel.org>
2017-04-20 09:07:10 -05:00
Dave Airlie
ab6eb211b0 drm/panel: Changes for v4.12-rc1
This contains two new drivers for a Sitronix and a Samsung panel as well
 as two new panels supported by the panel-simple driver.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCAAxFiEEiOrDCAFJzPfAjcif3SOs138+s6EFAljuZjgTHHRyZWRpbmdA
 bnZpZGlhLmNvbQAKCRDdI6zXfz6zodk+D/9rDUE/JY8WCqD0Xcu0kdMdeV2TVHxA
 M9uMMrywxdW4uGxmpW4NnRFNgAfYfjeOBRXCys41pUnkvjYPi4+/xeEjaFQB8xV5
 DVQmGXzsS8ytdztpa/7Q1EVGhvPeEXUU6Ye6PPm2ARlkmQpvMGX8wGHcuLTlYu9n
 vH6WWfRAx/tFoDqVY3MQ8aCVyeNTTrHXRsGoysVDCscNG3CZKYPo5FT1LIClRiAx
 pm/OrZfeTCZnaMLnWoQtN75NV8Q1slBejz7Yy7bAPLoMDFsoWKErquwZ5opLGxWH
 OkARiwxkKT2bXAI7GPce+TPp3tO76VTkq8a2ZuuGuOQQpEBU1s0wMYI9CfPYAtO6
 OOsfa81PKFn1OEa+LMxxtbv+1ubqyNHGrplRlPU4hW8PC99Ld7e8UQELQOsjJtXf
 MqSlc0RY04mdAs6CMIFhFEFnsuQDcjYLJ0IFLmRyVYm+/psag3di/2+/sZmQTcBv
 SwhG751tQoycINjTHInseL3xGRafCZPY7rIQ65Zx5VDNeXOJmjTOCn/f8VE/ANs/
 ZqOd0HFA34wV6ygtu3JXnQyH/eCon1cAgvNYCGnjZh1u0mOujOHK+rGGEF9rgD+Z
 vkPajZFPKlRQqRLpiajWreFuYEVkR1M1hn2TWgOE5sK5iWPgCluGpl6diq/WJMiM
 F+hjamxLMVxH/g==
 =zAVl
 -----END PGP SIGNATURE-----

Merge tag 'drm/panel/for-4.12-rc1' of git://anongit.freedesktop.org/tegra/linux into drm-next

drm/panel: Changes for v4.12-rc1

This contains two new drivers for a Sitronix and a Samsung panel as well
as two new panels supported by the panel-simple driver.

* tag 'drm/panel/for-4.12-rc1' of git://anongit.freedesktop.org/tegra/linux:
  drm/panel: simple: Add support for Winstar WF35LTIACD
  devicetree: add vendor prefix for Winstar Display Corp.
  drm/panel: Add driver for sitronix ST7789V LCD controller
  dt-bindings: display: panel: Add bindings for the Sitronix ST7789V panel
  drm/panel: Add support for S6E3HA2 panel driver on TM2 board
  dt-bindings: Add support for Samsung s6e3ha2 panel binding
  drm/panel: simple: Add support for Ampire AM-480272H3TMQW-T01H
  dt-bindings: Add Ampire AM-480272H3TMQW-T01H panel
2017-04-13 06:17:40 +10:00
Harry Morris
ab3916f7fe ieee802154: Add device tree documentation for CA8210
Signed-off-by: Harry Morris <h.morris@cascoda.com>
Acked-by: Stefan Schmidt <stefan@osg.samsung.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-04-12 22:02:38 +02:00
Kumar Gala
ac37f761ce of: Add vendor prefix for Nordic Semiconductor
Nordic Semiconductor is a semiconductor company specializing in ARM
Cortex-M based SoCs for low-power wireless communication, especially
Bluetooth.

Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
2017-04-10 13:24:24 -05:00
Richard Genoud
667eb7033d devicetree: add vendor prefix for Winstar Display Corp.
Winstar Display Corp. is specialized in LCD displays for embedded
products.
cf: http://www.winstar.com.tw

Signed-off-by: Richard Genoud <richard.genoud@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2017-04-06 23:57:16 +02:00
Marco Franchi
b3ee2785ee dt: Add vendor prefix for Sensirion
Sensirion is a sensor manufacturer, providing relative humidity sensors,
temperature sensor and flow sensor solutions.

Signed-off-by: Marco Franchi <marco.franchi@nxp.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-04-02 07:01:53 -07:00
Martin Blumenstingl
40b9e3f92e devicetree: add vendor prefix for Khadas
Khadas is a new sub-brand of "Shenzhen Wesion Technology Co., Ltd.".
They are developing Amlogic and Rockchip based "DIY boxes" (single board
computers): http://khadas.com/
They are best know for their latest product: the Khadas VIM (an Amlogic
GXL S905X based SBC).

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2017-03-23 11:54:34 -07:00
Jerome Brunet
b8c8963076 dt-bindings: add vendor prefix for Dioo
Dioo (http://http://www.dioo.com) design and produce power analog and
mixed signal IC.

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Rob Herring <robh@kernel.org>
2017-03-21 14:45:40 -05:00
Marco Franchi
93bad0678f dt: Add vendor prefix for Sensirion
Sensirion is a sensor manufacturer, providing relative humidity sensors,
temperature sensor and flow sensor solutions.

Signed-off-by: Marco Franchi <marco.franchi@nxp.com>
Signed-off-by: Rob Herring <robh@kernel.org>
2017-03-21 14:45:37 -05:00
Dave Airlie
9c233760a6 Merge tag 'drm-misc-next-2017-03-12' of git://anongit.freedesktop.org/git/drm-misc into drm-next
More drm-misc stuff for 4.12:

- drm_platform removal from Laurent
- more dw-hdmi bridge driver updates (Laurent, Kieran, Neil)
- more header cleanup and documentation
- more drm_debugs_remove_files removal (Noralf)
- minor qxl updates (Gerd)
- edp crc support in helper + analogix_dp (Tomeu) for more igt
  testing!
- old/new iterator roll-out (Maarten)
- new bridge drivers: lvds (Laurent), megachips-something (Peter
  Senna)

* tag 'drm-misc-next-2017-03-12' of git://anongit.freedesktop.org/git/drm-misc: (51 commits)
  drm: bridge: dw-hdmi: Move the driver to a separate directory.
  drm: bridge: dw-hdmi: Switch to regmap for register access
  drm: bridge: dw-hdmi: Remove device type from platform data
  drm: bridge: dw-hdmi: Add support for custom PHY configuration
  drm: bridge: dw-hdmi: Create PHY operations
  drm: bridge: dw-hdmi: Fix the PHY power up sequence
  drm: bridge: dw-hdmi: Fix the PHY power down sequence
  drm: bridge: dw-hdmi: Enable CSC even for DVI
  drm: bridge: dw-hdmi: Move CSC configuration out of PHY code
  drm: bridge: dw-hdmi: Remove unused functions
  drm: Extract drm_file.h
  drm: Remove DRM_MINOR_CNT
  drm: rename drm_fops.c to drm_file.c
  drm/doc: document fallback behaviour for atomic events
  drm: Remove drmP.h include from drm_kms_helper_common.c
  drm: Extract drm_pci.h
  drm: Move drm_lock_data out of drmP.h
  drm: Extract drm_prime.h
  drm/doc: Add todo about connector_list_iter
  drm/qxl: Remove qxl_debugfs_remove_files()
  ...
2017-03-15 11:32:01 +10:00
Sebastian Reichel
0522de0092 dt-bindings: Add vendor prefix for Motorola
Motorola was involved in semiconductor and mobile phone business.
The "motorola," prefix is already used by a couple of bindings:

* rtc/rtc-cmos.txt
* mfd/motorola-cpcap.txt
* regulator/cpcap-regulator.txt

Apart from that it is used in the DT file for the Droid 4 mobile
phone.

Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-03-09 01:32:34 +01:00
Carlo Caione
1476752051 dt-bindings: Add vendor prefix for Hwacom Systems Inc.
Hwacom Systems Inc. is a broadband system integrator and supplier of
mobile, fixed and IP networks related services as well as
multimedia application. Website: http://www.hwacom.com/

Signed-off-by: Carlo Caione <carlo@endlessm.com>
Acked-by: Rob Herring <robh@kernel.org>
[khilman: change shortlog prefix to dt-bindings]
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2017-03-06 09:55:57 -08:00
Jens Wiklander
c8bfafb159 dt/bindings: add bindings for optee
Introduces linaro prefix and adds bindings for ARM TrustZone based OP-TEE
implementation.

Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2017-03-06 11:27:52 +01:00
Linus Torvalds
a1a0db36d8 ARM: SoC: late DT updates for v4.11
These updates have been kept in a separate branch mostly because
 they rely on updates to the respective clk drivers to keep the
 shared header files in sync.
 
 This includes two branches for arm64 dt updates, both following up
 on earlier changes for the same platforms that are already merged:
 
 Samsung:
   - add USB3 support in Exynos7
   - minor PM related updates
 
 Amlogic:
   - new machines: WeTek Set-top-boxes
   - various devices added to DT
 
 There are also a couple of bugfixes that trickled in since the
 start of the merge window:
 
 - The moxart_defconfig was not building the intended platform
 - CPU-hotplug was broken on ux500
 - Coresight was broken on Juno (never worked)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIVAwUAWLmRS2CrR//JCVInAQKrkQ//bd8TCGXA0tRwDMEGejtWChZcNkGZDaer
 sNMyE/c1p5+/4euSmf3jW1JsIx4JDtjr0psKeRpgYId8GVdvaYceFbSMJl6o9hDc
 pm3sqb66xEgrWQoSBA2Urz/RhSIrxkYbuTpYbN4teV9I/IFgTUggaBSzfkq3SLRE
 bEVSbCw0S/6t3vJgW4CKCI75+a3NexqImvi8txNwueQQMnDLnOkG97vMUQJgDq0j
 E+CeOk0mvlGF+TiVoAhUxT3YIt8azUTfUVw7CBIRvo/49sUCiETk6xie93FaC7GI
 Tmg9KK+oZhrmqt8PBGkikxQMHATnKrfJbMNi/K6nrxW91ylSkwTN/7jfhSjFDrdI
 4WNB2x3u6KUnQ0XOKVY36gUnV8kJ/2K9pTZpq0K7m4czo8YAid9LumvDnqhPI0Xg
 fXxq3YBx7AfzsdBL3+nQ7AH3tr9Bvt01kMZwYwNgpqtglEBScAgzyrPG/yyTBFq7
 KOkoyNojTaHZHcDtYqSaxYls+2tdeyvYuQJ7QGQ5DJCW99NgbRuFfIUJvgwRPoKt
 13ioIJxDUHmemR6xFURWVH1dPkkqwtJht7us5jcxuxBL9ZhmEb6vophvyxj62zTZ
 8A+PE3cC1azhKph7rVrUl9KEoYZzedwDaTGBNpYz1gN7DxDvWHYINEPB4bBLzYmv
 uWsSYVbV2Qs=
 =A3U6
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC late DT updates from Arnd Bergmann:
 "These updates have been kept in a separate branch mostly because they
  rely on updates to the respective clk drivers to keep the shared
  header files in sync.

  This includes two branches for arm64 dt updates, both following up on
  earlier changes for the same platforms that are already merged:

  Samsung:
   - add USB3 support in Exynos7
   - minor PM related updates

  Amlogic:
   - new machines: WeTek Set-top-boxes
   - various devices added to DT

  There are also a couple of bugfixes that trickled in since the start
  of the merge window:

   - The moxart_defconfig was not building the intended platform
   - CPU-hotplug was broken on ux500
   - Coresight was broken on Juno (never worked)"

* tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (26 commits)
  ARM: deconfig: fix the moxart defconfig
  ARM: ux500: resume the second core properly
  arm64: dts: juno: update definition for programmable replicator
  arm64: dts: exynos: Add regulators for Vbus and Vbus-Boost
  arm64: dts: exynos: Add USB 3.0 controller node for Exynos7
  arm64: dts: exynos: Use macros for pinctrl configuration on Exynos7
  pinctrl: dt-bindings: samsung: Add Exynos7 specific pinctrl macro definitions
  arm64: dts: exynos: Add initial configuration for DISP clocks for TM2/TM2e
  ARM64: dts: meson-gxbb-p200: add ADC laddered keys
  ARM64: dts: meson: meson-gx: add the SAR ADC
  ARM64: dts: meson-gxl: add the pwm_ao_b pin
  ARM64: dts: meson-gx: add the missing pwm_AO_ab node
  clk: gxbb: fix CLKID_ETH defined twice
  ARM64: dts: meson-gxl: rename Nexbox A95x for consistency
  clk: gxbb: add the SAR ADC clocks and expose them
  dt-bindings: amlogic: Add WeTek boards
  ARM64: dts: meson-gxbb: Add support for WeTek Hub and Play
  dt-bindings: vendor-prefix: Add wetek vendor prefix
  ARM64: dts: meson-gxm: Rename q200 and q201 DT files for consistency
  ARM64: dts: meson-gx: Add HDMI HPD/DDC pinctrl nodes
  ...
2017-03-03 16:15:48 -08:00
Peter Senna Tschudin
b2fdab37aa dt-bindings: display: megachips-stdpxxxx-ge-b850v3-fw
Devicetree binding documentation for the second video output
of the GE B850v3:
   STDP4028-ge-b850v3-fw bridges (LVDS-DP)
   STDP2690-ge-b850v3-fw bridges (DP-DP++)

Added entry for MegaChips at:
 Documentation/devicetree/bindings/vendor-prefixes.txt

Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Martyn Welch <martyn.welch@collabora.co.uk>
Cc: Martin Donnelly <martin.donnelly@ge.com>
Cc: Javier Martinez Canillas <javier@dowhile0.org>
Cc: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Rob Herring <robh@kernel.org>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Peter Senna Tschudin <peter.senna@collabora.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/c2712336226c5170cfdc45103527fb2338d3d6cf.1488555615.git.peter.senna@collabora.com
2017-03-04 00:03:09 +05:30
Arnd Bergmann
d4b80d9aac Merge branch 'next/late' with mainline
* next/late: (25 commits)
  arm64: dts: exynos: Add regulators for Vbus and Vbus-Boost
  arm64: dts: exynos: Add USB 3.0 controller node for Exynos7
  arm64: dts: exynos: Use macros for pinctrl configuration on Exynos7
  pinctrl: dt-bindings: samsung: Add Exynos7 specific pinctrl macro definitions
  arm64: dts: exynos: Add initial configuration for DISP clocks for TM2/TM2e
  ARM64: dts: meson-gxbb-p200: add ADC laddered keys
  ARM64: dts: meson: meson-gx: add the SAR ADC
  ARM64: dts: meson-gxl: add the pwm_ao_b pin
  ARM64: dts: meson-gx: add the missing pwm_AO_ab node
  clk: gxbb: fix CLKID_ETH defined twice
  clk: samsung: exynos5433: Add data for 250MHz and 278MHz PLL rates
  clk: samsung: exynos5433: Add IDs for PHYCLK_MIPIDPHY0_* clocks
  ARM64: dts: meson-gxl: rename Nexbox A95x for consistency
  clk: gxbb: add the SAR ADC clocks and expose them
  dt-bindings: amlogic: Add WeTek boards
  ARM64: dts: meson-gxbb: Add support for WeTek Hub and Play
  dt-bindings: vendor-prefix: Add wetek vendor prefix
  ARM64: dts: meson-gxm: Rename q200 and q201 DT files for consistency
  ARM64: dts: meson-gx: Add HDMI HPD/DDC pinctrl nodes
  ARM64: dts: meson-gxbb-vega-s95: Add LED
  ...

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-03-02 17:52:44 +01:00
Linus Torvalds
ef96152e6a Less anger inducing pull request for 4.11
-----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJYr5aeAAoJEAx081l5xIa+ZK4P/RD3XUsduYqziVFCRQ2n0X8r
 +D92F4peTnSeSq7ZcZvprv+fezUGAHbfsWFs8feYCI5quUO6pEQSPwN+wyGazUi0
 4hUVB/K9Iq7U/Bj7Z/SmsU3NuWJnkNqbmvSFvUdqYK9D/kl+Tnllzap2N4cTzjwu
 GZOObz4n85cx94NqC3qw+7/ptL1X2MhXa+z0MzbkKyas84Bko1LwCSHRHsDKUnJc
 IcSpOcYZ6pSRMIsKH4Kd79Go4vWm7djXT9XL3PwDk2NcXXUOuR+cfdHqYchYaM/O
 iD2hvaSywBcflxSAml5x6vlXraoRd91ZZulgOObXtFfnUXdZB81TVq4uv6LU4Bx3
 jLFixUZuk/TJT+W/8N10l7M6yMIFaTpNoNMc5n4IF5RNNyWba4BKnrI+f+lQiOpY
 mmjIaidb0t5BICnJzCD264RhCEXmP0HaDV+iQQV6y6jJRXfd1bgnOXLKP73JekzB
 TsbDshCoE7UO0dJ7n0LFpXSTQDTYzlazoEp14f2kFBxir5/l7r67nUlnDTvUQfuN
 tSRvpN/s0wqvH3o7zhmpHxyJ/ZasPMQjNCFAuUEbx8L5SKXsua0FubIzN4aVpilb
 XvfdFRWM/lkOT/q+8cGI/TcE3YTqEmALmGxdV/akbdNCiCg6aClyCLRE/DZhgmSQ
 UMFjr9wlHl5Qo/OqLKj0
 =Yjfg
 -----END PGP SIGNATURE-----

Merge tag 'drm-for-v4.11-less-shouty' of git://people.freedesktop.org/~airlied/linux

Pull drm updates from Dave Airlie:
 "This is the main drm pull request for v4.11.

  Nothing too major, the tinydrm and mmu-less support should make
  writing smaller drivers easier for some of the simpler platforms, and
  there are a bunch of documentation updates.

  Intel grew displayport MST audio support which is hopefully useful to
  people, and FBC is on by default for GEN9+ (so people know where to
  look for regressions). AMDGPU has a lot of fixes that would like new
  firmware files installed for some GPUs.

  Other than that it's pretty scattered all over.

  I may have a follow up pull request as I know BenH has a bunch of AST
  rework and fixes and I'd like to get those in once they've been tested
  by AST, and I've got at least one pull request I'm just trying to get
  the author to fix up.

  Core:
   - drm_mm reworked
   - Connector list locking and iterators
   - Documentation updates
   - Format handling rework
   - MMU-less support for fbdev helpers
   - drm_crtc_from_index helper
   - Core CRC API
   - Remove drm_framebuffer_unregister_private
   - Debugfs cleanup
   - EDID/Infoframe fixes
   - Release callback
   - Tinydrm support (smaller drivers for simple hw)

  panel:
   - Add support for some new simple panels

  i915:
   - FBC by default for gen9+
   - Shared dpll cleanups and docs
   - GEN8 powerdomain cleanup
   - DMC support on GLK
   - DP MST audio support
   - HuC loading support
   - GVT init ordering fixes
   - GVT IOMMU workaround fix

  amdgpu/radeon:
   - Power/clockgating improvements
   - Preliminary SR-IOV support
   - TTM buffer priority and eviction fixes
   - SI DPM quirks removed due to firmware fixes
   - Powerplay improvements
   - VCE/UVD powergating fixes
   - Cleanup SI GFX code to match CI/VI
   - Support for > 2 displays on 3/5 crtc asics
   - SI headless fixes

  nouveau:
   - Rework securre boot code in prep for GP10x secure boot
   - Channel recovery improvements
   - Initial power budget code
   - MMU rework preperation

  vmwgfx:
   - Bunch of fixes and cleanups

  exynos:
   - Runtime PM support for MIC driver
   - Cleanups to use atomic helpers
   - UHD Support for TM2/TM2E boards
   - Trigger mode fix for Rinato board

  etnaviv:
   - Shader performance fix
   - Command stream validator fixes
   - Command buffer suballocator

  rockchip:
   - CDN DisplayPort support
   - IOMMU support for arm64 platform

  imx-drm:
   - Fix i.MX5 TV encoder probing
   - Remove lower fb size limits

  msm:
   - Support for HW cursor on MDP5 devices
   - DSI encoder cleanup
   - GPU DT bindings cleanup

  sti:
   - stih410 cleanups
   - Create fbdev at binding
   - HQVDP fixes
   - Remove stih416 chip functionality
   - DVI/HDMI mode selection fixes
   - FPS statistic reporting

  omapdrm:
   - IRQ code cleanup

  dwi-hdmi bridge:
   - Cleanups and fixes

  adv-bridge:
   - Updates for nexus

  sii8520 bridge:
   - Add interlace mode support
   - Rework HDMI and lots of fixes

  qxl:
   - probing/teardown cleanups

  ZTE drm:
   - HDMI audio via SPDIF interface
   - Video Layer overlay plane support
   - Add TV encoder output device

  atmel-hlcdc:
   - Rework fbdev creation logic

  tegra:
   - OF node fix

  fsl-dcu:
   - Minor fixes

  mali-dp:
   - Assorted fixes

  sunxi:
   - Minor fix"

[ This was the "fixed" pull, that still had build warnings due to people
  not even having build tested the result. I'm not a happy camper

  I've fixed the things I noticed up in this merge.      - Linus ]

* tag 'drm-for-v4.11-less-shouty' of git://people.freedesktop.org/~airlied/linux: (1177 commits)
  lib/Kconfig: make PRIME_NUMBERS not user selectable
  drm/tinydrm: helpers: Properly fix backlight dependency
  drm/tinydrm: mipi-dbi: Fix field width specifier warning
  drm/tinydrm: mipi-dbi: Silence: ‘cmd’ may be used uninitialized
  drm/sti: fix build warnings in sti_drv.c and sti_vtg.c files
  drm/amd/powerplay: fix PSI feature on Polars12
  drm/amdgpu: refuse to reserve io mem for split VRAM buffers
  drm/ttm: fix use-after-free races in vm fault handling
  drm/tinydrm: Add support for Multi-Inno MI0283QT display
  dt-bindings: Add Multi-Inno MI0283QT binding
  dt-bindings: display/panel: Add common rotation property
  of: Add vendor prefix for Multi-Inno
  drm/tinydrm: Add MIPI DBI support
  drm/tinydrm: Add helper functions
  drm: Add DRM support for tiny LCD displays
  drm/amd/amdgpu: post card if there is real hw resetting performed
  drm/nouveau/tmr: provide backtrace when a timeout is hit
  drm/nouveau/pci/g92: Fix rearm
  drm/nouveau/drm/therm/fan: add a fallback if no fan control is specified in the vbios
  drm/nouveau/hwmon: expose power_max and power_crit
  ..
2017-02-23 18:58:18 -08:00
Linus Torvalds
195849ea13 ARM: DT updates for v4.11
A total of 380 patches this time, mostly adding support for more hardware
 in the device tree descriptions. There is not much exciting here for 4.11,
 but I've tried my best to condense the information from the pull requests
 I got into a readable summary.
 
 Noteworthy changes to existing platforms include:
   - The GIC memory map was a bit wrong almost everywhere and now
     gets fixed up
   - The Allwinner platforms convert to the generic pinmux properties
   - The Marvell EBU platforms now use the new DSA binding
   - Samsung Exynos4212 was unused and gets removed
   - The Renesas power management got improved
 
 New production machines:
   - Lego Mindstorms EV3
     https://www.lego.com/en-us/mindstorms/about-ev3
   - Beelink X2 Android media box
     http://linux-sunxi.org/Beelink_X2
   - "Romulus" baseboard management controller for OpenPower
   - Axentia TSE-850 Data Radio Channel (DARC) encoder
     http://www.axentia.se/db/equipment.html
   - Luxul XAP-1410 and XWR-1200 wireless access points
     https://luxul.com/xap-1410
 
 New SoCs:
   - Allwinner H2+ and V3s, both minor variations of already
     supported chips
     http://www.allwinnertech.com/index.php?c=product&a=index&id=38
   - Marvell Prestera DX packet processors based on Armada XP architecture
     http://www.marvell.com/switching/prestera-dx/
   - Samsung Exynos4412 Prime gets added, a minor variation of Exynos4412
 
 New developer and reference boards:
   - Lichee Pi One, Lichee Pi Zero and Orange Pi Zero,
     all based on Allwinner SoCs
     http://linux-sunxi.org/LicheePi_One
     http://www.orangepi.org/orangepizero/
   - SAMA5d36ek Reference platform
     http://www.atmel.com/tools/sama5d36-ek.aspx
   - Beaglebone Green Wireless and Black Wireless
     https://beagleboard.org/black-wireless
     https://beagleboard.org/green-wireless
   - phyCORE-AM335x System on Module
     http://phytec.com/products/system-on-modules/phycore/am335x/
   - New revision of "vf610-zii" Zodiac Inflight Innovations board
   - Various i.MX System-on-Module: Is.IoT MX6UL, SavageBoard, Engicam i.Core
     http://www.opossom.com/english/index.html
     http://www.savageboard.org/
     http://www.engicam.com/en/products/embedded/som/sodimm/is-iot-mx6ul
     http://www.engicam.com/en/products/embedded/som/sodimm/i-core-m6s-dl-d-q
   - Liebherr (LWN) monitor 6 based on i.MX6 Quad, no idea what this is
 
 Cleanups and bugfixes on at91, bcm53xx, i.MX, mvebu, omap, oxnas, qcom,
     rockchip, sti, stm32 and tegra
 
 New device supports added to some boards and SoCs, briefly by platform:
   - Allwinner: SPDIF, A33 cpufreq, A33 Mali GPU
   - Aspeed: network, ipmi bt, gpio, pinmux
   - Broadcom: video encoder for raspberry pi, qspi, ethernet, sd/mmc
   - TI DaVinci: gpio, lcdc, usb, video-in, uart
   - TI Keystone 2: MSM RAM, power/reset, uart
   - Mediatek MT2701: clocks, iommu, spi, nand, adc, thermal
   - Marvell EBU: ethernet switch on Turris Omnia
   - NXP i.MX: otp ram, USB, wifi, bluetooth, spdif, spi, pmic,
     eeprom, mmc, nand
   - TI OMAP:
   - Qualcomm: coresight, gyro/accelerometer, hdmi
   - Renesas: pmic, soc-id
   - Rockchip: qos
   - Samsung: audio on Odroid-X
   - Socfpga: FPGA manager, i2c, led, can, watchdog, nand, power monitor
   - STi: video in/out
   - STM32: timer, pwm, i2c, rtc, add, i2s
   - NVIDIA Tegra: tpm
   - Uniphier: mmc/sd pinmux
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIVAwUAWK9aamCrR//JCVInAQJPpBAA2qUQYRfCgzK1fEu6X+c8pzqITqlV+Hx7
 8tBsZFINywKLnUXLs4Ip4DDK8uDsIACXSmGMdmhUVIXLsuRxJBl8av+ndd+ERGoF
 bg/iAIyA9hjKRhorE1wDyC4wg1S4P8laPevbK7NcDYDbK9MRmGSmEyP2uvhfLtVy
 2zoPfIE5aEipx6GoIATzLRqpMO6rWB/eg9OUZVKN5Hwh3LNCKtkX726GC9WGVqoE
 zslF1S6VH63dfru2Vlu5eFdvmiox54gBJBMR7yld+EIiXWilNT0eWfEYRd3CMT6E
 EwRCNiNRa21DHstBdL9pTuE+K0LpAUXlznjiqeWrZVuJfdHJy51pGVWwoc4ynbhI
 TS/GFgJI4iG2xrE3EIJS5cAl1S9WtNOYYvZATM35blFbZv7ASoAGdj2EECIIPwJr
 CR4l9Y2k/fuNHAzhR4B0fEKj/uWj7ONqcolpf8W6lZx0MvVNgeDwdx0eoLrbrxY9
 MJFb9OgD+BhNp5lIElysl0L9aEp3PxV668nSg4qV+Mo4w/5/OXhHK8675bXlITFU
 4Rw6fxRUBeO2B0LSonE4Ds8QKMQCs2yfxyMPWMn8yK/xFkwpHzwoJuRR2RYpbQTb
 5Hrnfk23k+2rflht07XBxNqqaznDQyPPvAvoB0ZZ2kchPYl75MlpAfOGlgfhXcmm
 Kp4g7VYyfAs=
 =ucQ/
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM DT updates from Arnd Bergmann:
 "A total of 380 patches this time, mostly adding support for more
  hardware in the device tree descriptions. There is not much exciting
  here for 4.11, but I've tried my best to condense the information from
  the pull requests I got into a readable summary.

  Noteworthy changes to existing platforms include:

   - The GIC memory map was a bit wrong almost everywhere and now gets
     fixed up

   - The Allwinner platforms convert to the generic pinmux properties

   - The Marvell EBU platforms now use the new DSA binding

   - Samsung Exynos4212 was unused and gets removed

   - The Renesas power management got improved

  New production machines:

   - Lego Mindstorms EV3:
        https://www.lego.com/en-us/mindstorms/about-ev3

   - Beelink X2 Android media box:
        http://linux-sunxi.org/Beelink_X2

   - "Romulus" baseboard management controller for OpenPower

   - Axentia TSE-850 Data Radio Channel (DARC) encoder:
        http://www.axentia.se/db/equipment.html

   - Luxul XAP-1410 and XWR-1200 wireless access points:
        https://luxul.com/xap-1410

  New SoCs:

   - Allwinner H2+ and V3s, both minor variations of already supported
     chips:
        http://www.allwinnertech.com/index.php?c=product&a=index&id=38

   - Marvell Prestera DX packet processors based on Armada XP
     architecture:
        http://www.marvell.com/switching/prestera-dx/

   - Samsung Exynos4412 Prime gets added, a minor variation of
     Exynos4412

  New developer and reference boards:

   - Lichee Pi One, Lichee Pi Zero and Orange Pi Zero, all based on
     Allwinner SoCs:
        http://linux-sunxi.org/LicheePi_One
        http://www.orangepi.org/orangepizero/

   - SAMA5d36ek Reference platform:
        http://www.atmel.com/tools/sama5d36-ek.aspx

   - Beaglebone Green Wireless and Black Wireless:
        https://beagleboard.org/black-wireless
        https://beagleboard.org/green-wireless

   - phyCORE-AM335x System on Module:
        http://phytec.com/products/system-on-modules/phycore/am335x/

   - New revision of "vf610-zii" Zodiac Inflight Innovations board

   - Various i.MX System-on-Module: Is.IoT MX6UL, SavageBoard, Engicam
     i.Core:
        http://www.opossom.com/english/index.html
        http://www.savageboard.org/
        http://www.engicam.com/en/products/embedded/som/sodimm/is-iot-mx6ul
        http://www.engicam.com/en/products/embedded/som/sodimm/i-core-m6s-dl-d-q

   - Liebherr (LWN) monitor 6 based on i.MX6 Quad, no idea what this is

   - Cleanups and bugfixes on at91, bcm53xx, i.MX, mvebu, omap, oxnas,
     qcom, rockchip, sti, stm32 and tegra

  New device supports added to some boards and SoCs, briefly by platform:

   - Allwinner: SPDIF, A33 cpufreq, A33 Mali GPU

   - Aspeed: network, ipmi bt, gpio, pinmux

   - Broadcom: video encoder for raspberry pi, qspi, ethernet, sd/mmc

   - TI DaVinci: gpio, lcdc, usb, video-in, uart

   - TI Keystone 2: MSM RAM, power/reset, uart

   - Mediatek MT2701: clocks, iommu, spi, nand, adc, thermal

   - Marvell EBU: ethernet switch on Turris Omnia

   - NXP i.MX: otp ram, USB, wifi, bluetooth, spdif, spi, pmic, eeprom,
     mmc, nand

   - TI OMAP:

   - Qualcomm: coresight, gyro/accelerometer, hdmi

   - Renesas: pmic, soc-id

   - Rockchip: qos

   - Samsung: audio on Odroid-X

   - Socfpga: FPGA manager, i2c, led, can, watchdog, nand, power monitor

   - STi: video in/out

   - STM32: timer, pwm, i2c, rtc, add, i2s

   - NVIDIA Tegra: tpm

   - Uniphier: mmc/sd pinmux"

* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (380 commits)
  ARM: dts: armada-385-linksys: fix DSA compatible property
  ARM: dts: Fix typo in armada-xp-98dx4251
  ARM: DTS: Fix register map for virt-capable GIC
  dt-bindings: arm,gic: Fix binding example for a virt-capable GIC
  ARM: dts: sun8i: sinlinx: Enable audio nodes
  ARM: dts: sun8i: parrot: Enable audio nodes
  ARM: dts: sun8i: Add audio codec, dai and card for A33
  ARM: dts: Add EMAC AXI settings for Arria10
  ARM: dts: am335x-chiliboard: Support charger
  ARM: dts: am335x-chiliboard: Support power button
  ARM: sun8i: dt: Add mali node
  dt-bindings: gpu: Add Mali Utgard bindings
  ARM: dts: stm32: Add I2C1 support for STM32429 eval board
  ARM: dts: stm32: Add I2C1 support for STM32F429 SoC
  ARM: dts: stm32: Use clock DT binding definition on stm32f429 family
  dt-bindings: mfd: stm32f4: Add missing binding definition
  dt-bindings: mfd: stm32f4: Fix STM32F4_X_CLOCK() macro
  ARM: dts: stm32: Enable pwm1 and pwm3 for stm32f469-disco
  ARM: dts: stm32: add Timers driver for stm32f429 MCU
  ARM: dts: add the AB8500 sysclk to the device trees
  ...
2017-02-23 15:46:25 -08:00
Dave Airlie
894ebc414d drm/panel: Changes for v4.11-rc1
This set contains a couple of cleanups as well as support for a few more
 simple panels.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCAAxFiEEiOrDCAFJzPfAjcif3SOs138+s6EFAlivHekTHHRyZWRpbmdA
 bnZpZGlhLmNvbQAKCRDdI6zXfz6zofTfEACk2GdNP2ZNfXmPGkTmgnFRghWDa64J
 7j+SMI/5D/6B/xR7obgj1vjEEnLEeY515IXxA+l04QRndsm2X3HGo3GwhrrkAfAl
 HDZR4UuXxyEWJz2G4eMrqwMril0LwUlMSXkelWR9hleFGeL9PZjt9XnRYFXgBEFA
 nyvC7VQIN5yz/d6rzRLUuWwnDrcnV4sRHssMucyht4xk8SAnSjAvJhJ6/5PQMkSL
 aMLOUcFMfhew66EEIZrA402NZlCGGM2OnRGD0qBoH45T2Wipxw2oR6jVwROgDgRS
 O5nKOLM+zktcdfmPJsP4PV3Z5oyhhilPTlGWEnIVEcBtWHS1hZbExgX7TqWgaqVD
 Il7Wnjiar8Yy7XpVdjyZtztvanNkHP+HW4BoHkhvMLiJIwMJ5y+VCBlZ6d02LQpZ
 qdCE2NCjLDmV5ro5FujWk/bdCx+YDwqVxhluiYYzMdweRTgmRE2On0zGVJciSUeX
 2CQhKau4lOJUjbEu+T5qLQgfXUhiUKFcI997x6elf74iwTncj22TCbRDshN7nct2
 HkBJviuLW1SqsZ0eZ+N4GaFr14INRVeFm21dwAU/VVkN95GKm1IOILs4ZruvT6WM
 iLJRQ9a2CGoJYLPYBfCETACm3CiwJZeeIMc581iC+wOWL2YjQpC0iooXmq6RChF0
 waAtb9/cQlHYgQ==
 =vKBu
 -----END PGP SIGNATURE-----

Merge tag 'drm/panel/for-4.11-rc1' of git://anongit.freedesktop.org/tegra/linux into drm-next

drm/panel: Changes for v4.11-rc1

This set contains a couple of cleanups as well as support for a few more
simple panels.

* tag 'drm/panel/for-4.11-rc1' of git://anongit.freedesktop.org/tegra/linux:
  drm/panel: simple: Specify bus width and flags for EDT displays
  drm/panel: simple: Add Netron DY E231732
  of: Add vendor prefix for Netron DY
  drm/panel: simple: Add support for Tianma TM070JDHG30
  of: Add vendor prefix for Tianma Micro-electronics
  drm/panel: simple: Add support BOE NV101WXMN51
  dt-bindings: display: Add BOE NV101WXMN51 panel binding
  drm/panel: Constify device node argument to of_drm_find_panel()
2017-02-24 08:29:03 +10:00
Linus Torvalds
d5dee39b27 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry:

 - a new driver for Zeitech touchscreen controller

 - a new driver for Samsung "touchkeys"

 - touchscreen driver for Moorestown platform has been removed because
   platform support is gone

 - MPU3050 accelerometer driver was removed in favor of IIO driver

 - miscellaneous driver cleanup and fixes

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (88 commits)
  Input: zet6223 - export OF device ID as module aliases
  Input: tsc2004/5 - switch to using generic device properties
  Input: tsc2004/5 - fix regulator handling
  Input: tsc2005 - add OF device table
  Input: add driver for Zeitec ZET6223
  Input: joydev - do not report stale values on first open
  Input: synaptics-rmi4 - forward upper mechanical buttons to PS/2 guest
  Input: synaptics-rmi4 - clean up F30 implementation
  Input: synaptics - use SERIO_OOB_DATA to handle trackstick buttons
  Input: psmouse - add a custom serio protocol to send extra information
  Input: synaptics-rmi4 - fix error return code in rmi_probe_interrupts()
  Input: xpad - restore LED state after device resume
  Input: synaptics-rmi4 - add rmi_find_function()
  Input: xpad - fix stuck mode button on Xbox One S pad
  Input: joydev - use clamp() macro
  Input: refuse to register absolute devices without absinfo
  Input: synaptics-rmi4 - add sysfs interfaces for hardware IDs
  Input: synaptics-rmi4 - add sysfs attribute update_fw_status
  Input: mousedev - stop offering PS/2 to userspace by default
  Input: tca8418 - switch to using generic device properties
  ...
2017-02-23 08:39:40 -08:00
Linus Torvalds
be5165a51d DeviceTree updates for 4.11:
- Sync dtc to upstream commit 0931cea3ba20. This picks up overlay
   support in dtc.
 
 - Set dma_ops for reserved memory users.
 
 - Make references to IOMMU consistent in DT bindings.
 
 - Cleanup references to pm_power_off in bindings.
 
 - Move some display bindings that snuck into the old bindings/video/
   path.
 
 - Fix some wrong documentation paths caused from binding restructuring.
 
 - Vendor prefixes for Faraday and Fujitsu.
 
 - Fix an of_node ref counting leak in of_find_node_opts_by_path
 
 - Introduce new graph helper of_graph_get_remote_node() which will be
   used by DRM drivers in 4.12.
 -----BEGIN PGP SIGNATURE-----
 
 iQItBAABCAAXBQJYrcjTEBxyb2JoQGtlcm5lbC5vcmcACgkQ+vtdtY28YcOPjg/8
 CZgxb3humk7Kkt+I3IsZCxsXhgdk2+CPfCSHlK1bc5Jqg0TzepQvFt4ZkuRHkZy/
 pQLUpRnUEUl64aaE8WxZY8ELYZggWazcTnWgCOzvoYpqSD4dAkAsqeti1Qh9PGKz
 fNLnPWREftojFZ7wVQ8btxC1dINc9eC9eEHsIsS8S8UIgLgv/aN6PeG1Ll/UUa9d
 u9orY3lxrz8JvdZslGtd1XLZqehIG0AAXqYRasyKl6Sc1NgjdwJTrqoeHEnCYaBM
 0+JUOf8kjRa1QNYN4SpuQ1gpovS8tPUGuODrWF2FvaQIxYHTzF8MpLqTvjBzdsj6
 b1owHzMXOLlPqqmmQ+jkHY5phisM4heJCIanNerzfM9+lHvb6kB3EuoTkAGvzsr/
 HCJi/Wk8tVrw6MYdnav0NT6aLIgZmrVspeJKlS1IdIkpsxZ64DsgX/YS/qGn/fcx
 qMrDXh8gMFwJBENRCKmKYFu1kzJkBoVEXtGlIbRQDZwOIuHPJl/ed6naMSfyUmcL
 wEe1I3buyB38FVzUTM2y0K1LfFJSJqOFSWTy5WCcTyP4cbKUyEja8vzN1Cx8BDwf
 wYtGWQQcg1Pyo074De6ojXWPiiW8f64GLLjqPALjA+J6JtZY5PwAnGXV+1ZYgX+V
 hV+kXbS4UIjN1koxroJ7ahfouWdOignmpwdvomQPLG8=
 =D/BO
 -----END PGP SIGNATURE-----

Merge tag 'devicetree-for-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

Pull DeviceTree updates from Rob Herring:
 "Pretty standard stuff with dtc upstream sync being the biggest piece.

   - Sync dtc to upstream commit 0931cea3ba20. This picks up overlay
     support in dtc.

   - Set dma_ops for reserved memory users.

   - Make references to IOMMU consistent in DT bindings.

   - Cleanup references to pm_power_off in bindings.

   - Move some display bindings that snuck into the old bindings/video/
     path.

   - Fix some wrong documentation paths caused from binding
     restructuring.

   - Vendor prefixes for Faraday and Fujitsu.

   - Fix an of_node ref counting leak in of_find_node_opts_by_path

   - Introduce new graph helper of_graph_get_remote_node() which will be
     used by DRM drivers in 4.12"

* tag 'devicetree-for-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (27 commits)
  DT: add Faraday Tec. as vendor
  of: introduce of_graph_get_remote_node
  of: Add missing space at end of pr_fmt().
  of: make of_device_make_bus_id() static
  of: fix of_node leak caused in of_find_node_opts_by_path
  dt-bindings: net: remove reference to fixed link support
  dt-bindings: power: reset: qnap-poweroff: Drop reference to pm_power_off
  dt-bindings: power: reset: gpio-poweroff: Drop reference to pm_power_off
  dt-bindings: mfd: as3722: Drop reference to pm_power_off
  dt-bindings: display: move ANX7814 and SiI8620 bridge bindings
  of/unittest: Swap arguments of of_unittest_apply_overlay()
  Documentation: usb: fix wrong documentation paths
  serial: fsl-imx-uart.txt: Remove generic property
  devicetree: Add Fujitsu Ltd. vendor prefix
  Documentation: display: fix wrong documentation paths
  of: remove redundant memset in overlay
  bus:qcom : Fix typo in qcom,ebi2.txt
  dt-bindings: qman: Remove pool channel node
  Documentation: panel-dpi: fix path to display-timing.txt
  devicetree: bindings: clk: mvebu: fix description for sata1 on Armada XP
  ...
2017-02-22 19:23:14 -08:00
Noralf Trønnes
fbaa326df3 of: Add vendor prefix for Multi-Inno
Multi-Inno Technology Co.,Ltd is a Hong Kong based company offering
LCD, LCD module products and complete panel solutions.

Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Rob Herring <robh@kernel.org>
2017-02-18 18:05:00 +01:00
Hans Ulli Kroll
4e29ccdb24 DT: add Faraday Tec. as vendor
add Faraday Technology Corporation as vendor faraday for DT

Signed-off-by: Hans Ulli Kroll <ulli.kroll@googlemail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
2017-02-15 17:01:50 -06:00
Jelle van der Waa
83f66a6f08 Input: add driver for Zeitec ZET6223
This is a basic driver for the Zeitec ZET6223 I2C touchscreen
controllers. The driver does not support firmware loading, which is not
required for all tablets which contain this chip.

Signed-off-by: Jelle van der Waa <jelle@vdwaa.nl>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-02-09 13:54:51 -08:00
Arnd Bergmann
2bad7f862e Allwinner DT changes for 4.11
The usual chunk of DT changes, most notably:
   - Support for the H2+ and the V3s
   - CPUFreq support for the A33
   - SPDIF support for the A31 and H3
   - New boards: Beelink X2, Lichee Pi One, Lichee Pi Zero,
     Orange Pi Zero
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABCAAGBQJYkFCYAAoJEBx+YmzsjxAgljYP/0seq1LEtMtoTeXHP6ZPkrju
 7/pHjEwJFZRH98DZ0QMAcUM+fHB0C4h5UadEXCIyzYBO9yeHzm+Hoys4VvpaQasL
 6taHz3zJ5T1/si7HyyP16LEwaFeARmSO3aXh4t5195Y2u3BFD+b2i5BpMquCC5CM
 XXJmx3Q487bUWjdufUqiSz0gWK1BfKw/eJAawoJbIl9Z6v7wOvE0SQF8ZtIc2eOl
 WX9uyNKdYh4PsSC0TxexDeKHNhLh2hJgO1HxYg+DTdyGM144XO0OSuPFtfilROaL
 tViKBohffz8A4K5m5iCaDva+P9318iO2xVN91/DFV6VS2XhMRvUrfZRd9kEvuhvu
 FJF3KrIZDLRu7tkcHVt9GDjO3CElejMT+qLOGg7t+9nJ+6RjyHUSBs6HIU0Opsu0
 Fw7LyHihzDH/m7m87lxUUmC5rSRqMVfuiKwphHYqDzkYEGEnL4kv055rE6cBFGyM
 zr7aajpiFgARPXj1XdZQRnz8uC8kySUf2o1oLPdhP3szX41AWBTiBuT7yqMB6qnD
 5B8Xj4zTsjEYfwsaWaI8VhbK2UsLgsUlbUXugKfqtjoPTjaWN6zQ3C6030Bov9za
 2jo0+187iYp/B/M4DPiH3Kicfntnj4DWRmBt8wCX/PVXS2tD1S617JzugbX/+EZK
 PF328UgsT3c1UkccBK9/
 =ig5Q
 -----END PGP SIGNATURE-----

Merge tag 'sunxi-dt-for-4.11' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into next/dt

Pull "Allwinner DT changes for 4.11" from Maxime Ripard:

The usual chunk of DT changes, most notably:
  - Support for the H2+ and the V3s
  - CPUFreq support for the A33
  - SPDIF support for the A31 and H3
  - New boards: Beelink X2, Lichee Pi One, Lichee Pi Zero,
    Orange Pi Zero

* tag 'sunxi-dt-for-4.11' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux: (42 commits)
  ARM: dts: sun8i-h3: Add SPDIF to the Beelink X2
  ARM: dts: sun8i-h3: Add the SPDIF block to the H3
  ARM: dts: sun8i-h3: Add SPDIF TX pin to the H3
  ARM: dts: sun8i-h3: Add dts for the Beelink X2 STB
  ARM: sun8i: sina33: Enable display
  ARM: sun8i: a23/a33: Add the oscillators accuracy
  ARM: sun8i: a23/a33: Enable the real LOSC and use it
  ARM: dts: sunxi: add support for Lichee Pi Zero board
  ARM: dts: sunxi: add dtsi file for V3s SoC
  ARM: dts: sun6i: sina31s: Enable USB OTG controller in peripheral mode
  ARM: dts: sun8i: reference-design: use AXP223 DTSI
  ARM: dts: sun8i: parrot: use AXP223 DTSI
  ARM: dts: sun8i: sina33: use AXP223 DTSI
  ARM: dts: sun8i: a33-olinuxino: use AXP223 DTSI
  ARM: dts: add DTSI for AXP223
  dt-bindings: power: axp20x-usb: add axp223 compatible
  ARM: dts: sun7i: Add wifi dt node on Banana Pro
  ARM: dts: sun6i: Add SPDIF to the Mele I7
  devicetree: bindings: Add vendor prefix for Shenzhen Xunlong Software
  ARM: dts: sun8i-h3: orange-pi-pc: Enable audio codec
  ...
2017-02-07 16:08:58 +01:00
Olof Johansson
c3fcab3af4 i.MX device tree updates for 4.11:
- New board support: vf610-zii-dev-rev-c, imx6ul-opos6uldev,
    imx6ul-isiot, imx6qdl-savageboard, imx6q-mccmon6.
  - A patch from Alexandre to correct the mangled license text which
    has been copied & pasted all over the i.MX device tree files.
  - Update cpu nodes of some i.MX SoCs to make them consistent and match
    ePAPR spec.
  - Add OCOTP device for i.MX6UL SoC.
  - Add security violation interrupt for i.MX25 DryIce.
  - Enable USB OTG, WIFI and Bluetooth support for i.MX6SX Udoo Neo
    board.
  - Enable S/PDIF and 2nd display pipeline support for CompuLab board..
  - Add SPI and LTC3676 PMIC support for Gateworks Ventana boards.
  - A few random device addition for various boards: TVE DAC regulators
    for imx53-qsb, EEPROM for vf610-zii-dev, eMMC and NAND support for
    i.MX6UL Engicam boards.
  - Cleanups on obsoleted or unused properties.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJYjWLQAAoJEFBXWFqHsHzOGt0H/2WCsuRi6WU7i7Wyk/S0Xq5t
 HzA/9m2f7z1vb1tzFknbpcWYa9bdofI7Dz+6KW2vp4fxhMyJn8SQxWwQjVNya2ba
 z8XLdEMlIuozBebPcH84ovNzqoBIOEFahGm5smm40s/o7XL8ua9tOEFaUc+jY0Pd
 n/3TPmoyBTlbrgiCZfLXCVsczHtEVW5JoQmXT7aDsxT0BQpnwLbgXKVOxgDvsWXM
 WtAKjpGvdiApD3znbFjYmRKak+2uilkV5B4jrL4mZf8dxCliykP4XA/LbiMLKAMN
 voMpTtTK7UYp59GrwKbqfJ+pPU7b6ndKK59f7FWrTDNgtDGe+J4ExjWwsDnuLfI=
 =HAbg
 -----END PGP SIGNATURE-----

Merge tag 'imx-dt-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt

i.MX device tree updates for 4.11:
 - New board support: vf610-zii-dev-rev-c, imx6ul-opos6uldev,
   imx6ul-isiot, imx6qdl-savageboard, imx6q-mccmon6.
 - A patch from Alexandre to correct the mangled license text which
   has been copied & pasted all over the i.MX device tree files.
 - Update cpu nodes of some i.MX SoCs to make them consistent and match
   ePAPR spec.
 - Add OCOTP device for i.MX6UL SoC.
 - Add security violation interrupt for i.MX25 DryIce.
 - Enable USB OTG, WIFI and Bluetooth support for i.MX6SX Udoo Neo
   board.
 - Enable S/PDIF and 2nd display pipeline support for CompuLab board..
 - Add SPI and LTC3676 PMIC support for Gateworks Ventana boards.
 - A few random device addition for various boards: TVE DAC regulators
   for imx53-qsb, EEPROM for vf610-zii-dev, eMMC and NAND support for
   i.MX6UL Engicam boards.
 - Cleanups on obsoleted or unused properties.

* tag 'imx-dt-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (32 commits)
  ARM: dts: udoo_neo: Add Bluetooth support
  ARM: dts: udoo_neo: Add Wifi support
  ARM: dts: udoo_neo: Add UDOO Neo USB OTG1 and OTG2 support
  ARM: dts: imx6ul: Add Engicam Is.IoT MX6UL NAND initial support
  ARM: dts: imx6ul: Add Engicam Is.IoT MX6UL eMMC initial support
  ARM: dts: imx6qdl: Fix "ERROR: code indent should use tabs where possible"
  ARM: dts: vf610-zii-dev: add EEPROM entry to Rev C
  ARM: dts: add Armadeus Systems OPOS6UL and OPOS6ULDEV support
  ARM: dts: imx6q-utilite-pro: enable 2nd display pipeline
  ARM: dts: vf610-zii-dev: Add .dts file for rev. C
  ARM: dts: vf610-zii-dev-rev-b: Remove leftover PWM pingroup
  ARM: dts: imx6: Support Savageboard quad
  ARM: dts: imx6: Support Savageboard dual
  ARM: dts: imx6: Add Savageboard common file
  ARM: dts: imx53-qsb: Provide the TVE DAC regulators
  ARM: dts: imx6q: Add mccmon6 board support
  Doc: devicetree: bindings: Add vendor prefix entry - lwn
  ARM: dts: imx/vf: Correct license text
  ARM: dts: imx25.dtsi: DryIce security violation interrupt
  ARM: dts: imx: Add ocotp node for imx6ul
  ...

Signed-off-by: Olof Johansson <olof@lixom.net>
2017-01-29 21:07:40 -08:00
Andreas Klinger
2bee073c0d iio: distance: srf08: add trivial DT binding
- Add DT binding for devantech,srf08
 - Add vendor devantech to vendor list

Signed-off-by: Andreas Klinger <ak@it-klinger.de>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-01-28 16:38:07 +00:00
Maxime Ripard
505c9d4105 of: Add vendor prefix for Netron DY
Netron DY is a brand of LCD panels found on SBCs and tablets.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2017-01-26 10:44:27 +01:00
Gary Bisson
c81cbc2e33 of: Add vendor prefix for Tianma Micro-electronics
Tianma Micro-electronics Co., Ltd. (Tianma) specializes in providing
display solutions and efficient support services worldwide.

More info:
http://en.tianma.com/about.shtml

Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2017-01-26 10:39:43 +01:00
Neil Armstrong
100bd9a961 dt-bindings: vendor-prefix: Add wetek vendor prefix
Add prefix for WeTek Electronics, limited, a company producing multimedia
Set-Top-Boxes and supporting KODI and LibreELEC distributions.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2017-01-23 10:09:37 -08:00
Greg Kroah-Hartman
994261dc8f devicetree: sort the Garmin vendor prefix properly.
The addition of Garmin put it in the incorrect place.  This fixes that
issue.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes: 9b27c270d4 ("devicetree: add Garmin vendor prefix")
Cc: Rob Herring <robh@kernel.org>
Cc: Matt Ranostay <matt@ranostay.consulting>
Cc: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
2017-01-20 16:02:19 +01:00
David Lechner
7dcc31e2e6 dt-bindings: Add vendor prefix for LEGO
Add a vendor prefix for LEGO Systems A/S

Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2017-01-20 17:15:55 +05:30
Greg Kroah-Hartman
4463c3e72d First round of new device support, features and cleanups for IIO in the 4.11 cycle.
It's shaping to be another fairly busy cycle. Lots more on the way!
 
 New device support
 * ads7950
   - new driver supporting ads7950, ads7951, ads7952, ads7953, ads7954,
   ads7955, ads7956, ads7957, ads7958, ads7959, ads7960, and ads7961 ADCs.
 * cm3605
   - New driver for this light sensor and proximity sensor  which is an
   analog part with some additional digital controls.
 * hx711
   - New driver.
 
 Core new stuff
 * Gravity sensor type.  This is a processed datastream in which the device
 will try to work out which way is down.
 * Split the buffer.h file into two parts. One provides the interface to 'use'
 a buffer, the second provides the internals of the buffer functionality as
 needed by implementations of buffers.
   - Move documentation inline so as to allow use of private: tag when
   generating documentation.
   - Add some utility functions for the few things that are directly done
   with the buffers.
   - Stop exporting functions that no-one uses outside of the core code.
   - Push docs down by the code in the c file where they should have always
   been.
   - Fix typo in kernel-doc for buffer.
   - push down some includes that were previously happening implicitly.
   - stop enabling the timestamp of the dummy device.
 
 Features and cleanups
 * ad5592r
   - ACPI support
 * ad5593r
   -ACPI support.
 * ad5933
   - Fix a false comment about size of a particular register.
 * ad7150
   - replace S_IRUGO | S_IWUSR with 0644.  I'm not that keen on these patches
   in general, but as it was nicely presented I took this one anyway. As a
   general rule will only take these as part of a larger driver cleanup.
   - don't eat an error but rather reutnr it in the write_event_config callback.
 * ad7606
   - replace non standard range attibute with _scale
 * ade7753
   - use usleep_range for short sleeps
 * ade7754
   - use usleep_range for short sleeps
 * ade7758
   - use usleep_range for short sleeps
 * ade7759
   - use usleep_range for short sleeps
 * ade7854
   - use usleep_range for short sleeps
 * adis16201
   - fix description
 * adis16203
   - fix description
   - fix copyright year
 * adis16209
   - fix description
 * adt7316
   - Add braces to arms of if else statement (for consistency)
   - Alignment fixes.
 * axp288
   - Fix up an issue with accidental overwrites of data.
 * bmi160
   - add deivce tables for i2c and spi to support correctly identifying the
   full dt name (including manufacturer).
   - device tree binding.
 * bmp280
   - use usleep_range for short sleeps.
 * cm3232
   - return error from cm3232_reg_init rather than eating it if the last write
   fails.
 * dummy driver
   - remove a semicolor found at end of a function defintition.
 * exynos-adc
   - use usleep_range for short sleeps.
 * hid-sensor (accel)
   - Add timestamp support.  The hardware can provide timestamps so lets support
   them. If not fall back to timestamps estimated in kernel.
 * hid-sensor (light)
   - Add a duplicate ID for the light channels so as to keep existing interface
   whilst also using the more standard IIO interface.
 * hts221
   - acpi probing
 * imx25-gcq
   - Add a macro call to allow this driver to be automatically loaded.
 * isl29028
   - reorganise code to avoid deep nesting of if statements.
   - move chip test and default regs into a function suitable or sharing with
   power management code.
   - tidy up some code alignment.
 * lidar-lite-v3
   - introduce compatible strings that make it clear Garmin have consideral
   friends.
 * mma8452
   - avoid returning signed value when unsigned is appropriate
 * spmi-vadc
   - Update function for generic voltage conversion to take into account that
   different channels on this device should be handled differently.
   - Rework code to allow per channel voltage scaling and support the standard
   options for this hardware.
   - Fixup three minor issues with the above patches for this part. These all
   effect test builds rather than the native builds for the part, but good to
   clean them up anyway.
 * st_sensors
   - support device matching from the ACPI DST tables.
   - acpi based probing for accelerometers
   - acpi based probing for pressure sensors
   - Allow pressure sensors to read negative values.
   - Export sampling frequency for lps25h and lps331ap.
   - Add support for the old DT bindings from the period when these deivces
   were often supported through windows.
 
 Docs fixup:
 * typo in sysfs-bus-iio
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEEbilms4eEBlKRJoGxVIU0mcT0FogFAlh2bhcRHGppYzIzQGtl
 cm5lbC5vcmcACgkQVIU0mcT0FogdSQ/9Hyd3ic5AgWyDKr9JI1vJPj3kT0PIYHLk
 4ucbQ8HUJQBBLnsausTb+UwuGV277DkVjGVsI4epn59H3CvkNh3Egl3XCmbhIpt2
 oyl9Pw9dSon6n/7I5pNSwmqD45O+aB7qFLigIfLmciwpMHZly3ExzGBMpqUkgjf9
 bVzndDqrfoNIrU7UaMD6QgrSxrgYJJJJwBDig/0zjAkGvu9L8a8ghrKkrRzMy62O
 nGP5mmEagivFF9lpGzzrw2pYBQWY4AFbsNvuLElE7nUz0PKKG+9J0oaBiglTYv2p
 mkNlYl7iTZfI3eFOXa+7HdSmeNhYX2dvbEM2jAA/Mr6ojWg2mSRu7Y19Kl2KP7K7
 BDRKBw+Cp0wkVvJ8LU/6PiDSmqp09VfjjqevzVGJi/BmWLzG0Mi2OsQmmynbw2SV
 hxiGETRV7vBoyJWDJuwJoftZaRnHWJbiQ6ftEUbWOFA9RIBMgOJBiL+RtxerJkHv
 FWlCFpv/618TUB/uM15+EOLVJAT5b7K+6+l6EGEjWdjiS/7vL7QM5DL8w4zV43zz
 cQ98UeIlqCkvoFmx9uHbl44COLQgzNtxAjytLxqbsOmEb40wlzoNzgSoUGu73SaG
 8qwznH0w0p8P1nyzwe9qKKK6SmFhj/tF6jKVmIi/H7wJdA1J5dAAmwFUBSxLs2DX
 u1eM3ikCl/M=
 =yjUA
 -----END PGP SIGNATURE-----

Merge tag 'iio-for-4.11a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

First round of new device support, features and cleanups for IIO in the 4.11 cycle.

It's shaping to be another fairly busy cycle. Lots more on the way!

New device support
* ads7950
  - new driver supporting ads7950, ads7951, ads7952, ads7953, ads7954,
  ads7955, ads7956, ads7957, ads7958, ads7959, ads7960, and ads7961 ADCs.
* cm3605
  - New driver for this light sensor and proximity sensor  which is an
  analog part with some additional digital controls.
* hx711
  - New driver.

Core new stuff
* Gravity sensor type.  This is a processed datastream in which the device
will try to work out which way is down.
* Split the buffer.h file into two parts. One provides the interface to 'use'
a buffer, the second provides the internals of the buffer functionality as
needed by implementations of buffers.
  - Move documentation inline so as to allow use of private: tag when
  generating documentation.
  - Add some utility functions for the few things that are directly done
  with the buffers.
  - Stop exporting functions that no-one uses outside of the core code.
  - Push docs down by the code in the c file where they should have always
  been.
  - Fix typo in kernel-doc for buffer.
  - push down some includes that were previously happening implicitly.
  - stop enabling the timestamp of the dummy device.

Features and cleanups
* ad5592r
  - ACPI support
* ad5593r
  -ACPI support.
* ad5933
  - Fix a false comment about size of a particular register.
* ad7150
  - replace S_IRUGO | S_IWUSR with 0644.  I'm not that keen on these patches
  in general, but as it was nicely presented I took this one anyway. As a
  general rule will only take these as part of a larger driver cleanup.
  - don't eat an error but rather reutnr it in the write_event_config callback.
* ad7606
  - replace non standard range attibute with _scale
* ade7753
  - use usleep_range for short sleeps
* ade7754
  - use usleep_range for short sleeps
* ade7758
  - use usleep_range for short sleeps
* ade7759
  - use usleep_range for short sleeps
* ade7854
  - use usleep_range for short sleeps
* adis16201
  - fix description
* adis16203
  - fix description
  - fix copyright year
* adis16209
  - fix description
* adt7316
  - Add braces to arms of if else statement (for consistency)
  - Alignment fixes.
* axp288
  - Fix up an issue with accidental overwrites of data.
* bmi160
  - add deivce tables for i2c and spi to support correctly identifying the
  full dt name (including manufacturer).
  - device tree binding.
* bmp280
  - use usleep_range for short sleeps.
* cm3232
  - return error from cm3232_reg_init rather than eating it if the last write
  fails.
* dummy driver
  - remove a semicolor found at end of a function defintition.
* exynos-adc
  - use usleep_range for short sleeps.
* hid-sensor (accel)
  - Add timestamp support.  The hardware can provide timestamps so lets support
  them. If not fall back to timestamps estimated in kernel.
* hid-sensor (light)
  - Add a duplicate ID for the light channels so as to keep existing interface
  whilst also using the more standard IIO interface.
* hts221
  - acpi probing
* imx25-gcq
  - Add a macro call to allow this driver to be automatically loaded.
* isl29028
  - reorganise code to avoid deep nesting of if statements.
  - move chip test and default regs into a function suitable or sharing with
  power management code.
  - tidy up some code alignment.
* lidar-lite-v3
  - introduce compatible strings that make it clear Garmin have consideral
  friends.
* mma8452
  - avoid returning signed value when unsigned is appropriate
* spmi-vadc
  - Update function for generic voltage conversion to take into account that
  different channels on this device should be handled differently.
  - Rework code to allow per channel voltage scaling and support the standard
  options for this hardware.
  - Fixup three minor issues with the above patches for this part. These all
  effect test builds rather than the native builds for the part, but good to
  clean them up anyway.
* st_sensors
  - support device matching from the ACPI DST tables.
  - acpi based probing for accelerometers
  - acpi based probing for pressure sensors
  - Allow pressure sensors to read negative values.
  - Export sampling frequency for lps25h and lps331ap.
  - Add support for the old DT bindings from the period when these deivces
  were often supported through windows.

Docs fixup:
* typo in sysfs-bus-iio
2017-01-19 10:40:44 +01:00
Marek Vasut
566088d1d2 devicetree: Add Fujitsu Ltd. vendor prefix
The vendor prefix for Fujitsu is used in the tree, but it's
still missing from the documentation, so add it. Fujitsu Ltd.
is a japanese ICT company, http://www.fujitsu.com

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Rob Herring <robh@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
2017-01-11 09:33:25 -06:00
Andreas Klinger
ff1293f677 iio: adc: hx711: Add DT binding for avia,hx711
Add DT bindings for avia,hx711
Add vendor avia to vendor list

Signed-off-by: Andreas Klinger <ak@it-klinger.de>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-01-10 19:54:58 +00:00
Icenowy Zheng
d62d8fcace devicetree: bindings: Add vendor prefix for Shenzhen Xunlong Software
Shenzhen Xunlong Software CO.,Limited is a SBC vendor, which produces
the "Orange Pi" series of SBCs.

Add a vendor prefix for it. This prefix is already used in many
Allwinner H3 boards.

Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-01-10 18:52:53 +01:00
Icenowy Zheng
3e60eb446d dt-bindings: add vendor prefix for Lichee Pi
Lichee Pi is a new "Pi"-named development board series.

Currently available device, Lichee Pi One, is by only one person as
night job, so the device series name is chosen to be the vendor prefix.

Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-01-10 18:52:48 +01:00
Milo Kim
7c9a567045 ARM: dts: imx6: Support Savageboard dual
Common savageboard DT file is used for board support.
Add the vendor name and specify the dtb file for i.MX6Q build.

Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Milo Kim <woogyom.kim@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-01-10 11:24:43 +08:00