renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-19 02:34:01 +08:00
Code
893,268 Commits 41 Branches 2 Tags 3.4 GiB
aac9662671
Commit Graph

10715 Commits

Author SHA1 Message Date
Linus Torvalds
aac9662671 USB/Thunderbolt/PHY driver updates for 5.6-rc1 
Here is the big USB and Thunderbolt and PHY driver updates for 5.6-rc1.
 
 With the advent of USB4, "Thunderbolt" has really become USB4, so the
 renaming of the Kconfig option and starting to share subsystem code has
 begun, hence both subsystems coming in through the same tree here.
 
 PHY driver updates also touched USB drivers, so that is coming in
 through here as well.
 
 Major stuff included in here are:
 	- USB 4 initial support added (i.e. Thunderbolt)
 	- musb driver updates
 	- USB gadget driver updates
 	- PHY driver updates
 	- USB PHY driver updates
 	- lots of USB serial stuff fixed up
 	- USB typec updates
 	- USB-IP fixes
 	- lots of other smaller USB driver updates
 
 All of these have been in linux-next for a while now (the usb-serial
 tree is already tested in linux-next on its own before merged into
 here), with no reported issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXjFTNw8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ynpKQCgrh2FoobS2x0oFg/OUHdjokQV/BYAoJGWLOmt
 8S5cnsCuLq3w5qpCcBva
 =PMGd
 -----END PGP SIGNATURE-----

Merge tag 'usb-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB/Thunderbolt/PHY driver updates from Greg KH:
 "Here is the big USB and Thunderbolt and PHY driver updates for
  5.6-rc1.

  With the advent of USB4, "Thunderbolt" has really become USB4, so the
  renaming of the Kconfig option and starting to share subsystem code
  has begun, hence both subsystems coming in through the same tree here.

  PHY driver updates also touched USB drivers, so that is coming in
  through here as well.

  Major stuff included in here are:
   - USB 4 initial support added (i.e. Thunderbolt)
   - musb driver updates
   - USB gadget driver updates
   - PHY driver updates
   - USB PHY driver updates
   - lots of USB serial stuff fixed up
   - USB typec updates
   - USB-IP fixes
   - lots of other smaller USB driver updates

  All of these have been in linux-next for a while now (the usb-serial
  tree is already tested in linux-next on its own before merged into
  here), with no reported issues"

[ Removed an incorrect compile test enablement for PHY_EXYNOS5250_SATA
  that causes configuration warnings    - Linus ]

* tag 'usb-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (207 commits)
  Doc: ABI: add usb charger uevent
  usb: phy: show USB charger type for user
  usb: cdns3: fix spelling mistake and rework grammar in text
  usb: phy: phy-gpio-vbus-usb: Convert to GPIO descriptors
  USB: serial: cyberjack: fix spelling mistake "To" -> "Too"
  USB: serial: ir-usb: simplify endpoint check
  USB: serial: ir-usb: make set_termios synchronous
  USB: serial: ir-usb: fix IrLAP framing
  USB: serial: ir-usb: fix link-speed handling
  USB: serial: ir-usb: add missing endpoint sanity check
  usb: typec: fusb302: fix "op-sink-microwatt" default that was in mW
  usb: typec: wcove: fix "op-sink-microwatt" default that was in mW
  usb: dwc3: pci: add ID for the Intel Comet Lake -V variant
  usb: typec: tcpci: mask event interrupts when remove driver
  usb: host: xhci-tegra: set MODULE_FIRMWARE for tegra186
  usb: chipidea: add inline for ci_hdrc_host_driver_init if host is not defined
  usb: chipidea: handle single role for usb role class
  usb: musb: fix spelling mistake: "periperal" -> "peripheral"
  phy: ti: j721e-wiz: Fix build error without CONFIG_OF_ADDRESS
  USB: usbfs: Always unlink URBs in reverse order
  ...
 2020-01-29 10:09:44 -08:00
Linus Torvalds
6ba3d7066c This is the bulk of pin control changes for the v5.6 kernel cycle: 
Core changes:
 
 - Dropped the chained IRQ setup callback into GPIOLIB as we
   got rid of the last users of that in this changeset.
 
 New drivers:
 
 - New driver for Ingenic X1830.
 
 - New driver for Freescale i.MX8MP.
 
 Driver enhancements:
 
 - Fix all remaining Intel drivers to pass their IRQ chips
   along with the GPIO chips.
 
 - Intel Baytrail allocates its irqchip dynamically.
 
 - Intel Lynxpoint is thoroughly rewritten and modernized.
 
 - Aspeed AST2600 pin muxing and configuration is much
   improved.
 
 - Qualcomm SC7180 functions are updated and wakeup interrupt
   map is provided.
 
 - A whole slew of Renesas SH-PFC cleanups and improvements.
 
 - Fix up the Intel DT bindings to use the generic YAML
   DT bindings schema. (A first user of this.)
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEElDRnuGcz/wPCXQWMQRCzN7AZXXMFAl4xQIkACgkQQRCzN7AZ
 XXNchQ/8C4+SAMMcDQm4sIWV1duebynrXuebISqWMhAtYDRjCsRpGCqVSt+iSWod
 z29pJ/sm0xpG1Bz0bmDZ4oFv7u7+J89a/0Kl4OqI1pbO97Uadu2qGmYxZf2tMtlH
 CwWVOUAldU9scogRD6Z+qixYdRRpKufpaVaU7ooubHocmgRtzd/VCT2MX76c3w7j
 1+yHjoAKM59jpOD/8oEucEYB+5ngyTiMXo3Nms/6ciq52GdtMLE8nK+t7dM+xNLL
 hMQP95iQ2Xb+cM/bv+vdMyKF6vRxKkkeQ/hWcivGWgdI/BSFg0vCq0mWdc8qWp8k
 VeIBaTVh5wuaAdkir9dHX/zt6TsRV8ktv88jW773/z4jHr/8PmQUyFMyEA1u1haP
 yrC/vm4eL6QWCAZeATra5+5FoH2ljzwaY2rgeU0hNixjaF/aIp3GPci7+YmKHTIr
 5zZTXKAeuC/nV7g77w4O9iwn+SHWPytWBrfNZ7unyV5fl4XHckY2vNBa/g8xkYyb
 FBk642EwHRGCULb8m40+cB7TMUzk9aluXge1detJDbqlr2i+tSOWp1c3GSavLl1L
 4qRAAS2j6de1H/EaoO7EcArVrSMdPgLdpRmwCMc2xvL0HOprl6y+5iL7x86ZtQHu
 NHvgnjtw6Z6t9n28f5ZI1iEXUA6EHOHHc/sPPUqScCj4v85B25A=
 =PnK5
 -----END PGP SIGNATURE-----

Merge tag 'pinctrl-v5.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pin control updates from Linus Walleij:
 "This is the bulk of pin control changes, nothing too exciting about
  this.

  Some changes hit arch/sh and arch/arm but are well isolated and
  acknowledged by the respective arch maintainers.

  Core changes:

   - Dropped the chained IRQ setup callback into GPIOLIB as we got rid
     of the last users of that in this changeset.

  New drivers:

   - New driver for Ingenic X1830.

   - New driver for Freescale i.MX8MP.

  Driver enhancements:

   - Fix all remaining Intel drivers to pass their IRQ chips along with
     the GPIO chips.

   - Intel Baytrail allocates its irqchip dynamically.

   - Intel Lynxpoint is thoroughly rewritten and modernized.

   - Aspeed AST2600 pin muxing and configuration is much improved.

   - Qualcomm SC7180 functions are updated and wakeup interrupt map is
     provided.

   - A whole slew of Renesas SH-PFC cleanups and improvements.

   - Fix up the Intel DT bindings to use the generic YAML DT bindings
     schema (a first user of this)"

* tag 'pinctrl-v5.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (99 commits)
  pinctrl: madera: Remove extra blank line
  pinctrl: qcom: Don't lock around irq_set_irq_wake()
  pinctrl: mvebu: armada-37xx: use use platform api
  gpio: Drop the chained IRQ handler assign function
  pinctrl: freescale: Add i.MX8MP pinctrl driver support
  dt-bindings: imx: Add pinctrl binding doc for i.MX8MP
  pinctrl: tigerlake: Tiger Lake uses _HID enumeration
  pinctrl: sunrisepoint: Add Coffee Lake-S ACPI ID
  pinctrl: iproc: Use platform_get_irq_optional() to avoid error message
  pinctrl: dt-bindings: Fix some errors in the lgm and pinmux schema
  pinctrl: intel: Pass irqchip when adding gpiochip
  pinctrl: intel: Add GPIO <-> pin mapping ranges via callback
  pinctrl: baytrail: Replace WARN with dev_info_once when setting direct-irq pin to output
  pinctrl: baytrail: Do not clear IRQ flags on direct-irq enabled pins
  pinctrl: sunrisepoint: Add missing Interrupt Status register offset
  pinctrl: sh-pfc: Split R-Car H3 support in two independent drivers
  pinctrl: artpec6: fix __iomem on reg in set
  pinctrl: ingenic: Use devm_platform_ioremap_resource()
  pinctrl: ingenic: Factorize irq_set_type function
  pinctrl: ingenic: Remove duplicated ingenic_chip_info structures
  ...
 2020-01-29 09:51:36 -08:00
Linus Torvalds
fa889d8555 This is the bulk of GPIO changes for the v5.6 kernel cycle 
Core changes:
 
 - Document the usecases for the kernelspace vs userspace
   handling of GPIOs.
 
 - Handle MSI (message signalled interrupts) properly in the
   core hierarchical irqdomain code.
 
 - Fix a rare race condition while initializing the descriptor
   array.
 
 New drivers:
 
 - Xylon LogiCVC GPIO driver.
 
 - WDC934x GPIO controller driver.
 
 Driver improvements:
 
 - Implemented suspend/resume in the Tegra driver.
 
 - MPC8xx edge detection fixup.
 
 - Properly convert ThunderX to use hierarchical irqdomain
   with GPIOLIB_IRQCHIP on top of the revert of the previous
   buggy switchover. This time it works (hopefully).
 
 Misc:
 
 - Drop a FMC remnant file <linux/ipmi-fru.h>
 
 - A slew of fixes.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEElDRnuGcz/wPCXQWMQRCzN7AZXXMFAl4xO9gACgkQQRCzN7AZ
 XXO+lBAAv+viQVCj1IG6ajCWpsAECHY+U3xRl4ETy86Jx2uNJS48xmnYrjbqUH+h
 r9HDi1Z5pyc14PtOEi01qVt87z612VmZbYNZ7tVBMXsGhN18wHRtC1y8GDtRSOxj
 Zqeyu6zFn2WxGTbwGdjxeliVcuCUOLu+zsE/xnCmUWT0gkeMi62MpSR4/chtbh3g
 Qu6lxtUcF2MN5IuGb6oCTnWQF+Bk9Pdib2HcKDqIGjQKbato7GLAEQdHY1K9vb7l
 Wwovasg62CDMtXohBL6SZJJPWPhoK0MUNrKdPJPb3W2yJKgoiVyoNz8FRGmX2OUx
 3v0elGP83v4jdmA6aHRfTmmcYKmEevxSFAxjCXw6pYEsPwf3VIr6TMkqANogA16S
 Ag2eda/6gTiVKlFCVi9uxkLfVvYcdUTYWCjG0xOseVJRnWpXJbNwjCd493Qwhbim
 zfziqoCYPZ6rLWcoDFkWZ27edfHCdPBlamnRyfHy5+1Y9s4jdcuMtp5B8tlvGuOp
 55j/FSNvpPdmXIS0g8/C90nZ2WiAM9N5C1CyrLwgJvixHcMFhmKkJVnJ0zHHCOdC
 Mu1CBdaGlH7o4+M+CIMU63q5YnHrmoZvZ3t5PPlCl5iUETuKGZmWBKzRv5qx3xld
 iwSf8vfy+4bJGOF9xSgSvTOpoVEfsJAagKoBiT3WJuK9zi65vmI=
 =3Glg
 -----END PGP SIGNATURE-----

Merge tag 'gpio-v5.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

Pull GPIO updates from Linus Walleij:
 "This is the bulk of GPIO changes for the v5.6 kernel cycle.

  This is a pretty calm cycle so far, nothing special going on really.
  Some more changes will come in from the irqchip and pin control trees.

  I also deleted an orphan include file for FMC that was dangling since
  subsystem was removed.

  Core changes:

   - Document the usecases for the kernelspace vs userspace handling of
     GPIOs.

   - Handle MSI (message signalled interrupts) properly in the core
     hierarchical irqdomain code.

   - Fix a rare race condition while initializing the descriptor array.

  New drivers:

   - Xylon LogiCVC GPIO driver.

   - WDC934x GPIO controller driver.

  Driver improvements:

   - Implemented suspend/resume in the Tegra driver.

   - MPC8xx edge detection fixup.

   - Properly convert ThunderX to use hierarchical irqdomain with
     GPIOLIB_IRQCHIP on top of the revert of the previous buggy
     switchover. This time it works (hopefully).

  Misc:

   - Drop a FMC remnant file <linux/ipmi-fru.h>

   - A slew of fixes"

* tag 'gpio-v5.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (48 commits)
  MAINTAINERS: Replace Tien Hock Loh as Altera PIO maintainer
  gpiolib: hold gpio devices lock until ->descs array is initialised
  gpio: aspeed-sgpio: fixed typos
  gpio: mvebu: clear irq in edge cause register before unmask edge irq
  gpiolib: Lower verbosity when allocating hierarchy irq
  gpiolib: Remove duplicated function gpio_do_set_config()
  gpio: Fix the no return statement warning
  gpio: wcd934x: Add support to wcd934x gpio controller
  gpiolib: remove set but not used variable 'config'
  gpio: vx855: fixed a typo
  gpio: mockup: sort headers alphabetically
  gpio: mockup: update the license tag
  gpio: Remove the unused flags
  gpiolib: Set lockdep class for hierarchical irq domains
  gpio: thunderx: Switch to GPIOLIB_IRQCHIP
  gpiolib: Add the support for the msi parent domain
  gpiolib: Add support for the irqdomain which doesn't use irq_fwspec as arg
  gpio: Add use guidance documentation
  dt-bindings: gpio: wcd934x: Add bindings for gpio
  gpio: altera: change to platform_get_irq_optional to avoid false-positive error
  ...
 2020-01-29 09:43:39 -08:00
Linus Torvalds
abb22e44cf - Depromote debug print on the db8500 platform (Linus Walleij) 
- Fix compilation warning when compiling with make W=1 (Amit Kucheria)
 
 - Code cleanup and refactoring, regmap conversion and add hwmon
   support on Qoriq (Andrey Smirnov)
 
 - Add an idle injection cpu cooling device and its documentation,
   rename the cpu_cooling device to cpufreq_cooling device (Daniel
   Lezcano)
 
 - Convert unexported functions to static, add the __init annotation in
   the thermal-of code and remove the pointless wrapper functions
   (Daniel Lezcano)
 
 - Fix register offset for Armada XP and register reset bit
   initialization (Zak Hays)
 
 - Enable hwmon on the rockchip (Stefan Schaeckeler)
 
 - Add the thermal sensor for the H6/H5/H3/A64/A83T/R40 sun8i platform
   and their device tree bindings, followed by a fix for the ths number
   and the sparse warnings (Yangtao Li)
 
 - Code cleansup for the sun8i and hwmon support (Yangtao Li)
 
 - Silent some messages which are misleading given the changes made in
   the previous version on generic-adc (Martin Blumenstingl)
 
 - Rename exynos to Exynos (Krzysztof Kozlowski)
 
 - Add the bcm2711 thermal driver with the device tree bindings (Stefan
   Wahren)
 
 - Use usleep_range() instead of udelay() as the call is always done in
   a sleep-able context (Geert Uytterhoeven)
 
 - Do code cleanup and re-organization to set the scene for a new
   process for the brcmstb (Florian Fainelli)
 
 - Fix bindings check issues on brcm (Stefan Wahren)
 
 - Add Jasper Lake support on int340x (Nivedita Swaminathan)
 
 - Add Comet Lake support on intel pch (Gayatri Kammela)
 
 - Fix unmatched pci_release_region() on x86 (Chuhong Yuan)
 
 - Remove temperature boundaries for rcar and rcar3 (Niklas Söderlund)
 
 - Fix return value to -ENODEV when thermal_zone_of_sensor_register()
   is called with the of-node is missing (Peter Mamonov)
 
 - Code cleanup, interrupt bouncing, and better support on stm32
   (Pascal Paillet)
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQRuKdf4M92Gi9vqihve5qtOL396pgUCXjAFCAAKCRDe5qtOL396
 prIfAQCjhNWKqP3U4oewia9p8dwwfsOpJMqUXge/k6sKzAqscAD/Rg4lWXaayOsX
 OWKhS/iL5eN7aXVnSH4MxONsTWhLTAs=
 =eZkX
 -----END PGP SIGNATURE-----

Merge tag 'thermal-v5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux

Pull thermal updates from Daniel Lezcano:

 - Depromote debug print on the db8500 platform (Linus Walleij)

 - Fix compilation warning when compiling with make W=1 (Amit Kucheria)

 - Code cleanup and refactoring, regmap conversion and add hwmon support
   on Qoriq (Andrey Smirnov)

 - Add an idle injection cpu cooling device and its documentation,
   rename the cpu_cooling device to cpufreq_cooling device (Daniel
   Lezcano)

 - Convert unexported functions to static, add the __init annotation in
   the thermal-of code and remove the pointless wrapper functions
   (Daniel Lezcano)

 - Fix register offset for Armada XP and register reset bit
   initialization (Zak Hays)

 - Enable hwmon on the rockchip (Stefan Schaeckeler)

 - Add the thermal sensor for the H6/H5/H3/A64/A83T/R40 sun8i platform
   and their device tree bindings, followed by a fix for the ths number
   and the sparse warnings (Yangtao Li)

 - Code cleansup for the sun8i and hwmon support (Yangtao Li)

 - Silent some messages which are misleading given the changes made in
   the previous version on generic-adc (Martin Blumenstingl)

 - Rename exynos to Exynos (Krzysztof Kozlowski)

 - Add the bcm2711 thermal driver with the device tree bindings (Stefan
   Wahren)

 - Use usleep_range() instead of udelay() as the call is always done in
   a sleep-able context (Geert Uytterhoeven)

 - Do code cleanup and re-organization to set the scene for a new
   process for the brcmstb (Florian Fainelli)

 - Fix bindings check issues on brcm (Stefan Wahren)

 - Add Jasper Lake support on int340x (Nivedita Swaminathan)

 - Add Comet Lake support on intel pch (Gayatri Kammela)

 - Fix unmatched pci_release_region() on x86 (Chuhong Yuan)

 - Remove temperature boundaries for rcar and rcar3 (Niklas Söderlund)

 - Fix return value to -ENODEV when thermal_zone_of_sensor_register() is
   called with the of-node is missing (Peter Mamonov)

 - Code cleanup, interrupt bouncing, and better support on stm32 (Pascal
   Paillet)

* tag 'thermal-v5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (66 commits)
  thermal: stm32: Fix low threshold interrupt flood
  thermal: stm32: Improve temperature computing
  thermal: stm32: Handle multiple trip points
  thermal: stm32: Disable interrupts at probe
  thermal: stm32: Rework sensor mode management
  thermal: stm32: Fix icifr register name
  thermal: of: Make thermal_zone_of_sensor_register return -ENODEV if a sensor OF node is missing
  thermal: rcar_gen3_thermal: Remove temperature bound
  thermal: rcar_thermal: Remove temperature bound
  thermal: intel: intel_pch_thermal: Add Comet Lake (CML) platform support
  thermal: intel: Fix unmatched pci_release_region
  thermal: int340x: processor_thermal: Add Jasper Lake support
  dt-bindings: brcm,avs-ro-thermal: Fix binding check issues
  thermal: brcmstb_thermal: Register different ops per process
  thermal: brcmstb_thermal: Restructure interrupt registration
  thermal: brcmstb_thermal: Add 16nm process thermal parameters
  dt-bindings: thermal: Define BCM7216 thermal sensor compatible
  thermal: brcmstb_thermal: Prepare to support a different process
  thermal: brcmstb_thermal: Do not use DT coefficients
  thermal: rcar_thermal: Use usleep_range() instead of udelay()
  ...
 2020-01-28 16:31:08 -08:00
Linus Torvalds
bd2463ac7d Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next 
Pull networking updates from David Miller:

 1) Add WireGuard

 2) Add HE and TWT support to ath11k driver, from John Crispin.

 3) Add ESP in TCP encapsulation support, from Sabrina Dubroca.

 4) Add variable window congestion control to TIPC, from Jon Maloy.

 5) Add BCM84881 PHY driver, from Russell King.

 6) Start adding netlink support for ethtool operations, from Michal
    Kubecek.

 7) Add XDP drop and TX action support to ena driver, from Sameeh
    Jubran.

 8) Add new ipv4 route notifications so that mlxsw driver does not have
    to handle identical routes itself. From Ido Schimmel.

 9) Add BPF dynamic program extensions, from Alexei Starovoitov.

10) Support RX and TX timestamping in igc, from Vinicius Costa Gomes.

11) Add support for macsec HW offloading, from Antoine Tenart.

12) Add initial support for MPTCP protocol, from Christoph Paasch,
    Matthieu Baerts, Florian Westphal, Peter Krystad, and many others.

13) Add Octeontx2 PF support, from Sunil Goutham, Geetha sowjanya, Linu
    Cherian, and others.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1469 commits)
  net: phy: add default ARCH_BCM_IPROC for MDIO_BCM_IPROC
  udp: segment looped gso packets correctly
  netem: change mailing list
  qed: FW 8.42.2.0 debug features
  qed: rt init valid initialization changed
  qed: Debug feature: ilt and mdump
  qed: FW 8.42.2.0 Add fw overlay feature
  qed: FW 8.42.2.0 HSI changes
  qed: FW 8.42.2.0 iscsi/fcoe changes
  qed: Add abstraction for different hsi values per chip
  qed: FW 8.42.2.0 Additional ll2 type
  qed: Use dmae to write to widebus registers in fw_funcs
  qed: FW 8.42.2.0 Parser offsets modified
  qed: FW 8.42.2.0 Queue Manager changes
  qed: FW 8.42.2.0 Expose new registers and change windows
  qed: FW 8.42.2.0 Internal ram offsets modifications
  MAINTAINERS: Add entry for Marvell OcteonTX2 Physical Function driver
  Documentation: net: octeontx2: Add RVU HW and drivers overview
  octeontx2-pf: ethtool RSS config support
  octeontx2-pf: Add basic ethtool support
  ...
 2020-01-28 16:02:33 -08:00
Linus Torvalds
a78208e243 Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 
Pull crypto updates from Herbert Xu:
 "API:
   - Removed CRYPTO_TFM_RES flags
   - Extended spawn grabbing to all algorithm types
   - Moved hash descsize verification into API code

  Algorithms:
   - Fixed recursive pcrypt dead-lock
   - Added new 32 and 64-bit generic versions of poly1305
   - Added cryptogams implementation of x86/poly1305

  Drivers:
   - Added support for i.MX8M Mini in caam
   - Added support for i.MX8M Nano in caam
   - Added support for i.MX8M Plus in caam
   - Added support for A33 variant of SS in sun4i-ss
   - Added TEE support for Raven Ridge in ccp
   - Added in-kernel API to submit TEE commands in ccp
   - Added AMD-TEE driver
   - Added support for BCM2711 in iproc-rng200
   - Added support for AES256-GCM based ciphers for chtls
   - Added aead support on SEC2 in hisilicon"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (244 commits)
  crypto: arm/chacha - fix build failured when kernel mode NEON is disabled
  crypto: caam - add support for i.MX8M Plus
  crypto: x86/poly1305 - emit does base conversion itself
  crypto: hisilicon - fix spelling mistake "disgest" -> "digest"
  crypto: chacha20poly1305 - add back missing test vectors and test chunking
  crypto: x86/poly1305 - fix .gitignore typo
  tee: fix memory allocation failure checks on drv_data and amdtee
  crypto: ccree - erase unneeded inline funcs
  crypto: ccree - make cc_pm_put_suspend() void
  crypto: ccree - split overloaded usage of irq field
  crypto: ccree - fix PM race condition
  crypto: ccree - fix FDE descriptor sequence
  crypto: ccree - cc_do_send_request() is void func
  crypto: ccree - fix pm wrongful error reporting
  crypto: ccree - turn errors to debug msgs
  crypto: ccree - fix AEAD decrypt auth fail
  crypto: ccree - fix typo in comment
  crypto: ccree - fix typos in error msgs
  crypto: atmel-{aes,sha,tdes} - Retire crypto_platform_data
  crypto: x86/sha - Eliminate casts on asm implementations
  ...
 2020-01-28 15:38:56 -08:00
Linus Torvalds
c0275ae758 Merge branch 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip 
Pull x86 cpu-features updates from Ingo Molnar:
 "The biggest change in this cycle was a large series from Sean
  Christopherson to clean up the handling of VMX features. This both
  fixes bugs/inconsistencies and makes the code more coherent and
  future-proof.

  There are also two cleanups and a minor TSX syslog messages
  enhancement"

* 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits)
  x86/cpu: Remove redundant cpu_detect_cache_sizes() call
  x86/cpu: Print "VMX disabled" error message iff KVM is enabled
  KVM: VMX: Allow KVM_INTEL when building for Centaur and/or Zhaoxin CPUs
  perf/x86: Provide stubs of KVM helpers for non-Intel CPUs
  KVM: VMX: Use VMX_FEATURE_* flags to define VMCS control bits
  KVM: VMX: Check for full VMX support when verifying CPU compatibility
  KVM: VMX: Use VMX feature flag to query BIOS enabling
  KVM: VMX: Drop initialization of IA32_FEAT_CTL MSR
  x86/cpufeatures: Add flag to track whether MSR IA32_FEAT_CTL is configured
  x86/cpu: Set synthetic VMX cpufeatures during init_ia32_feat_ctl()
  x86/cpu: Print VMX flags in /proc/cpuinfo using VMX_FEATURES_*
  x86/cpu: Detect VMX features on Intel, Centaur and Zhaoxin CPUs
  x86/vmx: Introduce VMX_FEATURES_*
  x86/cpu: Clear VMX feature flag if VMX is not fully enabled
  x86/zhaoxin: Use common IA32_FEAT_CTL MSR initialization
  x86/centaur: Use common IA32_FEAT_CTL MSR initialization
  x86/mce: WARN once if IA32_FEAT_CTL MSR is left unlocked
  x86/intel: Initialize IA32_FEAT_CTL MSR at boot
  tools/x86: Sync msr-index.h from kernel sources
  selftests, kvm: Replace manual MSR defs with common msr-index.h
  ...
 2020-01-28 12:46:42 -08:00
Stephen Hemminger
3127642dc1 netem: change mailing list 
The old netem mailing list was inactive and recently was targeted by
spammers. Switch to just using netdev mailing list which is where all
the real change happens.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
 2020-01-28 10:54:55 +01:00
Linus Torvalds
3d3b44a61a The interrupt departement provides: 
- A mechanism to shield isolated tasks from managed interrupts:
 
    The affinity of managed interrupts is completely controlled by the
    kernel and user space has no influence on them. The reason is that
    the automatically assigned affinity correlates to the multi-queue
    CPU handling of block devices.
 
    If the generated affinity mask spaws both housekeeping and isolated CPUs
    the interrupt could be routed to an isolated CPU which would then be
    disturbed by I/O submitted by a housekeeping CPU.
 
    The new mechamism ensures that as long as one housekeeping CPU is online
    in the assigned affinity mask the interrupt is routed to a housekeeping
    CPU.
 
    If there is no online housekeeping CPU in the affinity mask, then the
    interrupt is routed to an isolated CPU to keep the device queue intact,
    but unless the isolated CPU submits I/O by itself these interrupts are
    not raised.
 
  - A small addon to the device tree irqdomain core code to avoid
    duplication in irq chip drivers
 
  - Conversion of the SiFive PLIC to hierarchical domains
 
  - The usual pile of new irq chip drivers: SiFive GPIO, Aspeed SCI, NXP
    INTMUX, Meson A1 GPIO
 
  - The first cut of support for the new ARM GICv4.1
 
  - The usual pile of fixes and improvements in core and driver code
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAl4vcbETHHRnbHhAbGlu
 dXRyb25peC5kZQAKCRCmGPVMDXSYoezyEADBPf0ipu5+KeTtCR+DjRAO8o0wM0J/
 JNkRkSrS/qENSda/d6pZE2AWpqlDOs6apg+SNGkv0knM+1Xy94nLOf4zJBsR+GW0
 w2jw68egnyB2QZtm/BvOJL+qCoixcObg5sLt0165pDdKzyDNWeCMtRU+QAw42T/l
 WC2QrhjKKqYST1m+UgDf1UXz8TDGIW4muRP9UiG0Uwc0LU6cG2H4OmGn0bYissaT
 JTG75pzGqUH3kZ1a1qD28nGyoY85BXz1iV5/IvIPaQbkQARbvfMbh1KvAnGhJj7N
 96rjMpOGv2/kv1FI+4FUy6w5Wn4EyW2OaCtB/oUCFNcZvrNNgvglxCRQkkO8yb3D
 VOOm595ICm3EnIfxBpSzhgvVl5MY39g6qRb6Rpnna+8eRtrYnytMBdvhY0OGlG8/
 cZYZDay0nzhY6vq023iw1YMDKqft7TR1R+6w1iPL7nXHXW99Dhv87d1Fjt0CqphD
 NIoNDgxciIyfMbMBvcg1qPe/g3L8+cAKNzGsIwIU9GneEZFBk3/piGcBlFpoEEOK
 2QKvks3QRXMx+qVWkIqy3LZKV9EAQlb9Lpjaa1ec5d4m/EdACm19OpZpqoCljPtw
 9vdaMz4ZxvUbwjih3VnVPklZCiVGiKj1j0iw5v3FCHh4MUljzCrxNMqK/U9CR8H0
 uid3EX8YMi+DXA==
 =E2VR
 -----END PGP SIGNATURE-----

Merge tag 'irq-core-2020-01-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull irq updates from Thomas Gleixner:
 "The interrupt departement provides:

   - A mechanism to shield isolated tasks from managed interrupts:

     The affinity of managed interrupts is completely controlled by the
     kernel and user space has no influence on them. The reason is that
     the automatically assigned affinity correlates to the multi-queue
     CPU handling of block devices.

     If the generated affinity mask spaws both housekeeping and isolated
     CPUs the interrupt could be routed to an isolated CPU which would
     then be disturbed by I/O submitted by a housekeeping CPU.

     The new mechamism ensures that as long as one housekeeping CPU is
     online in the assigned affinity mask the interrupt is routed to a
     housekeeping CPU.

     If there is no online housekeeping CPU in the affinity mask, then
     the interrupt is routed to an isolated CPU to keep the device queue
     intact, but unless the isolated CPU submits I/O by itself these
     interrupts are not raised.

   - A small addon to the device tree irqdomain core code to avoid
     duplication in irq chip drivers

   - Conversion of the SiFive PLIC to hierarchical domains

   - The usual pile of new irq chip drivers: SiFive GPIO, Aspeed SCI,
     NXP INTMUX, Meson A1 GPIO

   - The first cut of support for the new ARM GICv4.1

   - The usual pile of fixes and improvements in core and driver code"

* tag 'irq-core-2020-01-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (33 commits)
  genirq, sched/isolation: Isolate from handling managed interrupts
  irqchip/gic-v4.1: Allow direct invalidation of VLPIs
  irqchip/gic-v4.1: Suppress per-VLPI doorbell
  irqchip/gic-v4.1: Add VPE INVALL callback
  irqchip/gic-v4.1: Add VPE eviction callback
  irqchip/gic-v4.1: Add VPE residency callback
  irqchip/gic-v4.1: Add mask/unmask doorbell callbacks
  irqchip/gic-v4.1: Plumb skeletal VPE irqchip
  irqchip/gic-v4.1: Implement the v4.1 flavour of VMOVP
  irqchip/gic-v4.1: Don't use the VPE proxy if RVPEID is set
  irqchip/gic-v4.1: Implement the v4.1 flavour of VMAPP
  irqchip/gic-v4.1: VPE table (aka GICR_VPROPBASER) allocation
  irqchip/gic-v3: Add GICv4.1 VPEID size discovery
  irqchip/gic-v3: Detect GICv4.1 supporting RVPEID
  irqchip/gic-v3-its: Fix get_vlpi_map() breakage with doorbells
  irqdomain: Fix a memory leak in irq_domain_push_irq()
  irqchip: Add NXP INTMUX interrupt multiplexer support
  dt-bindings: interrupt-controller: Add binding for NXP INTMUX interrupt multiplexer
  irqchip: Define EXYNOS_IRQ_COMBINER
  irqchip/meson-gpio: Add support for meson a1 SoCs
  ...
 2020-01-27 17:22:21 -08:00
Linus Torvalds
e279160f49 The timekeeping and timers departement provides: 
- Time namespace support:
 
     If a container migrates from one host to another then it expects that
     clocks based on MONOTONIC and BOOTTIME are not subject to
     disruption. Due to different boot time and non-suspended runtime these
     clocks can differ significantly on two hosts, in the worst case time
     goes backwards which is a violation of the POSIX requirements.
 
     The time namespace addresses this problem. It allows to set offsets for
     clock MONOTONIC and BOOTTIME once after creation and before tasks are
     associated with the namespace. These offsets are taken into account by
     timers and timekeeping including the VDSO.
 
     Offsets for wall clock based clocks (REALTIME/TAI) are not provided by
     this mechanism. While in theory possible, the overhead and code
     complexity would be immense and not justified by the esoteric potential
     use cases which were discussed at Plumbers '18.
 
     The overhead for tasks in the root namespace (host time offsets = 0) is
     in the noise and great effort was made to ensure that especially in the
     VDSO. If time namespace is disabled in the kernel configuration the
     code is compiled out.
 
     Kudos to Andrei Vagin and Dmitry Sofanov who implemented this feature
     and kept on for more than a year addressing review comments, finding
     better solutions. A pleasant experience.
 
   - Overhaul of the alarmtimer device dependency handling to ensure that
     the init/suspend/resume ordering is correct.
 
   - A new clocksource/event driver for Microchip PIT64
 
   - Suspend/resume support for the Hyper-V clocksource
 
   - The usual pile of fixes, updates and improvements mostly in the
     driver code.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAl4vbTcTHHRnbHhAbGlu
 dXRyb25peC5kZQAKCRCmGPVMDXSYoXT2D/96iJ3G9Snn2khEQP3XS2rYmtDGw7NO
 m1n96falwWeGe6zreU80R2Jge5nLxQtNhRoMPLLee1GpHwRC6lvqEqgdZ4LMBrD2
 JqV7Gzg8Urmdh+hpDsyTCpeEWEzoMKxiFOX8PxwctqUhM4szEe5iQg2YQsg85Jw2
 vG6M93N2xwDILh4rhEMbKjo+5ZmYn7c1RQvpGOSmpKOj940W/N7H2HBsFhdaJ1Kw
 FW5pFv1211PaU5RV2YNb2dMeeMTT1N3e2VN4Dkadoxp47pb+725gNHEBEjmV9poG
 Lp4IhzGAPnj8zVD88icQZSTaK3gUHMClxprJ0Pf84WEtiH7SeGu8BPYyu77+oNDe
 yzcctDJNyCWXkzmaP/fe/HLc0TStbvNAJ5Tagp4BC75gzebeb4/n8RtRT0fKeDYL
 pxpDPKDAPU7p1JSjxiWAtshqjBycWNY3Z49bA7/VhKBhnv8BDyBPGlYd7/4xrbGr
 RK7DQNXJwaJaiNJ7p5PiaFxGzNyB0B9sThD/slSlEInIKb4h9YzWr0TV+NB62VnB
 sDcN+tpLbRPz5/5cHGGfxR0+zKWpfyai8pzbmmaXEaKssjRYwyvcac5EZdgbWpbK
 k7CqAjoWLA2P+tGeePNJOf5JYK6Vmdyh4clmuwM0zOiRJ9NlWUyMf3z7QYILs4RO
 UAI+6opYlZEPAw==
 =x3qT
 -----END PGP SIGNATURE-----

Merge tag 'timers-core-2020-01-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull timer updates from Thomas Gleixner:
 "The timekeeping and timers departement provides:

   - Time namespace support:

     If a container migrates from one host to another then it expects
     that clocks based on MONOTONIC and BOOTTIME are not subject to
     disruption. Due to different boot time and non-suspended runtime
     these clocks can differ significantly on two hosts, in the worst
     case time goes backwards which is a violation of the POSIX
     requirements.

     The time namespace addresses this problem. It allows to set offsets
     for clock MONOTONIC and BOOTTIME once after creation and before
     tasks are associated with the namespace. These offsets are taken
     into account by timers and timekeeping including the VDSO.

     Offsets for wall clock based clocks (REALTIME/TAI) are not provided
     by this mechanism. While in theory possible, the overhead and code
     complexity would be immense and not justified by the esoteric
     potential use cases which were discussed at Plumbers '18.

     The overhead for tasks in the root namespace (ie where host time
     offsets = 0) is in the noise and great effort was made to ensure
     that especially in the VDSO. If time namespace is disabled in the
     kernel configuration the code is compiled out.

     Kudos to Andrei Vagin and Dmitry Sofanov who implemented this
     feature and kept on for more than a year addressing review
     comments, finding better solutions. A pleasant experience.

   - Overhaul of the alarmtimer device dependency handling to ensure
     that the init/suspend/resume ordering is correct.

   - A new clocksource/event driver for Microchip PIT64

   - Suspend/resume support for the Hyper-V clocksource

   - The usual pile of fixes, updates and improvements mostly in the
     driver code"

* tag 'timers-core-2020-01-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (71 commits)
  alarmtimer: Make alarmtimer_get_rtcdev() a stub when CONFIG_RTC_CLASS=n
  alarmtimer: Use wakeup source from alarmtimer platform device
  alarmtimer: Make alarmtimer platform device child of RTC device
  alarmtimer: Update alarmtimer_get_rtcdev() docs to reflect reality
  hrtimer: Add missing sparse annotation for __run_timer()
  lib/vdso: Only read hrtimer_res when needed in __cvdso_clock_getres()
  MIPS: vdso: Define BUILD_VDSO32 when building a 32bit kernel
  clocksource/drivers/hyper-v: Set TSC clocksource as default w/ InvariantTSC
  clocksource/drivers/hyper-v: Untangle stimers and timesync from clocksources
  clocksource/drivers/timer-microchip-pit64b: Fix sparse warning
  clocksource/drivers/exynos_mct: Rename Exynos to lowercase
  clocksource/drivers/timer-ti-dm: Fix uninitialized pointer access
  clocksource/drivers/timer-ti-dm: Switch to platform_get_irq
  clocksource/drivers/timer-ti-dm: Convert to devm_platform_ioremap_resource
  clocksource/drivers/em_sti: Fix variable declaration in em_sti_probe
  clocksource/drivers/em_sti: Convert to devm_platform_ioremap_resource
  clocksource/drivers/bcm2835_timer: Fix memory leak of timer
  clocksource/drivers/cadence-ttc: Use ttc driver as platform driver
  clocksource/drivers/timer-microchip-pit64b: Add Microchip PIT64B support
  clocksource/drivers/hyper-v: Reserve PAGE_SIZE space for tsc page
  ...
 2020-01-27 16:47:05 -08:00
Linus Torvalds
b1dba24731 selinux/stable-5.6 PR 20200127 
-----BEGIN PGP SIGNATURE-----
 
 iQJIBAABCAAyFiEES0KozwfymdVUl37v6iDy2pc3iXMFAl4vRu8UHHBhdWxAcGF1
 bC1tb29yZS5jb20ACgkQ6iDy2pc3iXPE1BAA0yg0npafRIrjIMU5IkpDh8TvywWF
 DDcarqBXNSIXJtl3EWr7LynvKKqBs4jN7R0ZRMYc5e/6LrSUBvds4GTPm7dOOW4C
 cIlAjXTlek2LvHf1/6aNE2SdlkNBYOYo//ifVH+zAn6VOQHGZXBd31oxwPLNW5mP
 vVS7OIGhWPcviUebxD7mNmgS/ODoZS/ZL434RK07FhMnN/jEdfuNnu87uz7WAK1p
 MWmqzB2tkwrj5uN5wRU6+9R82xYGbo6Xq5uEsFidMrlrn+cguuf+xPrrejT1qVnU
 8r72MKKRjfObMRj1fQt3VC0feFt2WyC0qAk3XwKljmllGXZIzV1IPmrui9pLD5Ti
 IhLgIEBtMpJgrYhFwl3yMe1EUwdQ/WAlbf8GnoIWyzm0oOo0kaN5BfrvlYtYYmN3
 i2xpDOcQ0J4I3tA7zXMpD5tWzDzePxxadZ367qtwRp/AhbL4bnqbvP7vaPtZczz2
 pTEGFYIbeqfLCwy2PWHZOVYj83bidmC0lQ3PTFsC26Upui750MdFa7toQV70Hiqo
 EdpOzxUHbn6pPuGy7Rey26ybOiZPkL1q1Czoa6jbNyutv8ts2eZNyuCL25QKKzvE
 42AvSzA0lt8taDbSbNu+FiexR619oEt15hSrHrRslunecumYfNjJyk85ZCloh+XL
 dnD1bPytgl1G4i8=
 =2jFm
 -----END PGP SIGNATURE-----

Merge tag 'selinux-pr-20200127' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux

Pull SELinux update from Paul Moore:
 "This is one of the bigger SELinux pull requests in recent years with
  28 patches. Everything is passing our test suite and the highlights
  are below:

   - Mark CONFIG_SECURITY_SELINUX_DISABLE as deprecated. We're some time
     away from actually attempting to remove this in the kernel, but the
     only distro we know that still uses it (Fedora) is working on
     moving away from this so we want to at least let people know we are
     planning to remove it.

   - Reorder the SELinux hooks to help prevent bad things when SELinux
     is disabled at runtime. The proper fix is to remove the
     CONFIG_SECURITY_SELINUX_DISABLE functionality (see above) and just
     take care of it at boot time (e.g. "selinux=0").

   - Add SELinux controls for the kernel lockdown functionality,
     introducing a new SELinux class/permissions: "lockdown { integrity
     confidentiality }".

   - Add a SELinux control for move_mount(2) that reuses the "file {
     mounton }" permission.

   - Improvements to the SELinux security label data store lookup
     functions to speed up translations between our internal label
     representations and the visible string labels (both directions).

   - Revisit a previous fix related to SELinux inode auditing and
     permission caching and do it correctly this time.

   - Fix the SELinux access decision cache to cleanup properly on error.
     In some extreme cases this could limit the cache size and result in
     a decrease in performance.

   - Enable SELinux per-file labeling for binderfs.

   - The SELinux initialized and disabled flags were wrapped with
     accessors to ensure they are accessed correctly.

   - Mark several key SELinux structures with __randomize_layout.

   - Changes to the LSM build configuration to only build
     security/lsm_audit.c when needed.

   - Changes to the SELinux build configuration to only build the IB
     object cache when CONFIG_SECURITY_INFINIBAND is enabled.

   - Move a number of single-caller functions into their callers.

   - Documentation fixes (/selinux -> /sys/fs/selinux).

   - A handful of cleanup patches that aren't worth mentioning on their
     own, the individual descriptions have plenty of detail"

* tag 'selinux-pr-20200127' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux: (28 commits)
  selinux: fix regression introduced by move_mount(2) syscall
  selinux: do not allocate ancillary buffer on first load
  selinux: remove redundant allocation and helper functions
  selinux: remove redundant selinux_nlmsg_perm
  selinux: fix wrong buffer types in policydb.c
  selinux: reorder hooks to make runtime disable less broken
  selinux: treat atomic flags more carefully
  selinux: make default_noexec read-only after init
  selinux: move ibpkeys code under CONFIG_SECURITY_INFINIBAND.
  selinux: remove redundant msg_msg_alloc_security
  Documentation,selinux: fix references to old selinuxfs mount point
  selinux: deprecate disabling SELinux and runtime
  selinux: allow per-file labelling for binderfs
  selinuxfs: use scnprintf to get real length for inode
  selinux: remove set but not used variable 'sidtab'
  selinux: ensure the policy has been loaded before reading the sidtab stats
  selinux: ensure we cleanup the internal AVC counters on error in avc_update()
  selinux: randomize layout of key structures
  selinux: clean up selinux_enabled/disabled/enforcing_boot
  selinux: remove unnecessary selinux cred request
  ...
 2020-01-27 15:38:15 -08:00
Linus Torvalds
55816dc1a5 ACPI updates for 5.6-rc1 
- Update the ACPICA code in the kernel to upstream revision
    20200110 including:
 
    * Update of copyright notices to 2020 (Bob Moore).
 
    * Dispatcher fix to always generate buffer objects for the ASL
      create_field() operator (Maximilian Luz).
 
    * Debugger cleanup (Colin Ian King).
 
    * Disassembler change to create buffer fields in
      ACPI_PARSE_LOAD_PASS1 (Erik Kaneda).
 
    * UNIX line ending support for non-windows builds in acpisrc
      (Erik Kaneda).
 
  - Update the list of ACPICA maintainers (Rafael Wysocki).
 
  - Add Intel Tiger Lake ACPI device IDs to the ACPI DPTF, ACPI fan,
    int340x_thermal and intel-hid drivers (Gayatri Kammela).
 
  - Make the ACPI fan driver create additional sysfs attributes to
    expose power states information for fans (Srinivas Pandruvada).
 
  - Fix up the ACPI battery driver to deal with unexpected battery
    capacity information in a better way (Hans de Goede).
 
  - Add ACPI backlight quirks for Lenovo E41-25/45 and MSI MS-7721
    boards (Aaron Ma, Hans de Goede).
 
  - Add DMI quirk for Razer Blade Stealth 13 late 2019 lid switch
    to the ACPI button driver (Jason Ekstrand).
 
  - Drop TIMER_DEFERRABLE from the GHES polling mode timer function
    flags to make it run precisely at the configured time (Bhaskar
    Upadhaya).
 
  - Fix race condition related to the reference counting of query
    handlers in the ACPI EC driver (Rafael Wysocki).
 
  - Fix ACPI tools build issue (Zhengyuan Liu).
 
  - Replace dma_request_slave_channel() with dma_request_chan() in the
    firmware guide documentation for ACPI (Peter Ujfalusi).
 
  - Fix typo in a comment and clean up function parameter data type
    inconsistencies (Kacper Piwiński, Tian Tao).
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAl4u2n8SHHJqd0Byand5
 c29ja2kubmV0AAoJEILEb/54YlRxT6MP/jjGgOHOLiw7pUxR0PZ0pr8VZ8NcSxp6
 8YpqfD5ABu/Y+/FYUacMRpMXQ1Jy6KMLLzb2uLInBi2f+BksucDpwpQoK1uRc6u3
 JS7Q78OrOr7RZHqWsUHWVdI1A+bpyhbkwyw2b45HRfY4tLRe9+X7s2Dh+i3qip4E
 A7jPM2fcHgkJV6V0EPwG2BG5bKudlfvWLvySsHl8d0AwDf+GbLrrGY7hbPArQW1C
 tBxt5DG/5WUT8RqJoXaCMHbuqGdihs71WHxU9nIOww04In6MfQHYgt7+FVT1J329
 KZXFfvJaJWBNO9u7QoUvSe8qpHLFpUC2/ZW9TawSkHXrYhAsIO8jKoJXZGSncKZZ
 huU4owh6cHhPJ3YMFj84I5C5YSUaMeX3sbZu0vqObTPMcwB4HIrkHyMAR5zgu+Zb
 kBDTTExeRSdSN6IzfvC2xbpW2G6Q3WuuyVd7klNN7E+7ZRkQAOuq5Pr+gdMejlza
 BrYkK0UdRN+V1YnjENxf+86hAbuTiD329tYNiQxzgyb+Y8dLrugLb9n0P5RWfLbt
 r2r/tBKMEq2Pzis55ICTEwMfSXixomJDdQ8+XWmV8Evdbq7O1zq1KHRZbFFYVclS
 aqWXimFCfSwPdXfvwN7xPa2khNtaKxcsKb7mxq3R31Thzs29iFmJMxFf6ousaMdf
 VoYkCQiwQTpC
 =qOut
 -----END PGP SIGNATURE-----

Merge tag 'acpi-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull ACPI updates from Rafael Wysocki:
 "These update the ACPICA code in the kernel to the most recent upstream
  revision (20200110), add new hardware support to a handful of ACPI
  drivers, make the ACPI fan driver expose power states information for
  fans, add some more quirks, fix bugs and clean up assorted things.

  Specifics:

   - Update the ACPICA code in the kernel to upstream revision 20200110
     including:
      - Update of copyright notices to 2020 (Bob Moore).
      - Dispatcher fix to always generate buffer objects for the ASL
        create_field() operator (Maximilian Luz).
      - Debugger cleanup (Colin Ian King).
      - Disassembler change to create buffer fields in
        ACPI_PARSE_LOAD_PASS1 (Erik Kaneda).
      - UNIX line ending support for non-windows builds in acpisrc (Erik
        Kaneda).

   - Update the list of ACPICA maintainers (Rafael Wysocki).

   - Add Intel Tiger Lake ACPI device IDs to the ACPI DPTF, ACPI fan,
     int340x_thermal and intel-hid drivers (Gayatri Kammela).

   - Make the ACPI fan driver create additional sysfs attributes to
     expose power states information for fans (Srinivas Pandruvada).

   - Fix up the ACPI battery driver to deal with unexpected battery
     capacity information in a better way (Hans de Goede).

   - Add ACPI backlight quirks for Lenovo E41-25/45 and MSI MS-7721
     boards (Aaron Ma, Hans de Goede).

   - Add DMI quirk for Razer Blade Stealth 13 late 2019 lid switch to
     the ACPI button driver (Jason Ekstrand).

   - Drop TIMER_DEFERRABLE from the GHES polling mode timer function
     flags to make it run precisely at the configured time (Bhaskar
     Upadhaya).

   - Fix race condition related to the reference counting of query
     handlers in the ACPI EC driver (Rafael Wysocki).

   - Fix ACPI tools build issue (Zhengyuan Liu).

   - Replace dma_request_slave_channel() with dma_request_chan() in the
     firmware guide documentation for ACPI (Peter Ujfalusi).

   - Fix typo in a comment and clean up function parameter data type
     inconsistencies (Kacper Piwiński, Tian Tao)"

* tag 'acpi-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (25 commits)
  ACPICA: Update version to 20200110
  ACPICA: All acpica: Update copyrights to 2020 Including tool signons.
  apei/ghes: Do not delay GHES polling
  ACPI: button: Add DMI quirk for Razer Blade Stealth 13 late 2019 lid switch
  ACPI: PPTT: Consistently use unsigned int as parameter type
  ACPI: EC: Reference count query handlers under lock
  ACPICA: Update the list of maintainers
  ACPICA: Update version to 20191213
  ACPICA: Dispatcher: always generate buffer objects for ASL create_field() operator
  ACPICA: acpisrc: add unix line ending support for non-windows build
  ACPICA: Disassembler: create buffer fields in ACPI_PARSE_LOAD_PASS1
  ACPICA: debugger: fix spelling mistake "adress" -> "address"
  ACPI: video: Do not export a non working backlight interface on MSI MS-7721 boards
  docs: firmware-guide: ACPI: Replace dma_request_slave_channel() with dma_request_chan()
  thermal: int340x_thermal: Add Tiger Lake ACPI device IDs
  platform/x86: intel-hid: Add Tiger Lake ACPI device ID
  ACPI: fan: Add Tiger Lake ACPI device ID
  ACPI: DPTF: Add Tiger Lake ACPI device IDs
  ACPI: fan: Expose fan performance state information
  tools/power/acpi: fix compilation error
  ...
 2020-01-27 11:48:47 -08:00
Linus Torvalds
6d277aca48 Power management updates for 5.6-rc1 
- Update the ACPI processor driver in order to export
    acpi_processor_evaluate_cst() to the code outside of it, add
    ACPI support to the intel_idle driver based on that and clean
    up that driver somewhat (Rafael Wysocki).
 
  - Add an admin guide document for the intel_idle driver (Rafael
    Wysocki).
 
  - Clean up cpuidle core and drivers, enable compilation testing
    for some of them (Benjamin Gaignard, Krzysztof Kozlowski, Rafael
    Wysocki, Yangtao Li).
 
  - Fix reference counting of OPP (operating performance points) table
    structures (Viresh Kumar).
 
  - Add support for CPR (Core Power Reduction) to the AVS (Adaptive
    Voltage Scaling) subsystem (Niklas Cassel, Colin Ian King,
    YueHaibing).
 
  - Add support for TigerLake Mobile and JasperLake to the Intel RAPL
    power capping driver (Zhang Rui).
 
  - Update cpufreq drivers:
 
    * Add i.MX8MP support to imx-cpufreq-dt (Anson Huang).
 
    * Fix usage of a macro in loongson2_cpufreq (Alexandre Oliva).
 
    * Fix cpufreq policy reference counting issues in s3c and
      brcmstb-avs (chenqiwu).
 
    * Fix ACPI table reference counting issue and HiSilicon quirk
      handling in the CPPC driver (Hanjun Guo).
 
    * Clean up spelling mistake in intel_pstate (Harry Pan).
 
    * Convert the kirkwood and tegra186 drivers to using
      devm_platform_ioremap_resource() (Yangtao Li).
 
  - Update devfreq core:
 
    * Add 'name' sysfs attribute for devfreq devices (Chanwoo Choi).
 
    * Clean up the handing of transition statistics and allow them
      to be reset by writing 0 to the 'trans_stat' devfreq device
      attribute in sysfs (Kamil Konieczny).
 
    * Add 'devfreq_summary' to debugfs (Chanwoo Choi).
 
    * Clean up kerneldoc comments and Kconfig indentation (Krzysztof
      Kozlowski, Randy Dunlap).
 
  - Update devfreq drivers:
 
    * Add dynamic scaling for the imx8m DDR controller and clean up
      imx8m-ddrc (Leonard Crestez, YueHaibing).
 
    * Fix DT node reference counting and nitialization error code path
      in rk3399_dmc and add COMPILE_TEST and HAVE_ARM_SMCCC dependency
      for it (Chanwoo Choi, Yangtao Li).
 
    * Fix DT node reference counting in rockchip-dfi and make it use
      devm_platform_ioremap_resource() (Yangtao Li).
 
    * Fix excessive stack usage in exynos-ppmu (Arnd Bergmann).
 
    * Fix initialization error code paths in exynos-bus (Yangtao Li).
 
    * Clean up exynos-bus and exynos somewhat (Artur Świgoń, Krzysztof
      Kozlowski).
 
  - Add tracepoints for tracking usage_count updates unrelated to
    status changes in PM-runtime (Michał Mirosław).
 
  - Add sysfs attribute to control the "sync on suspend" behavior
    during system-wide suspend (Jonas Meurer).
 
  - Switch system-wide suspend tests over to 64-bit time (Alexandre
    Belloni).
 
  - Make wakeup sources statistics in debugfs cover deleted ones which
    used to be the case some time ago (zhuguangqing).
 
  - Clean up computations carried out during hibernation, update
    messages related to hibernation and fix a spelling mistake in one
    of them (Wen Yang, Luigi Semenzato, Colin Ian King).
 
  - Add mailmap entry for maintainer e-mail address that has not been
    functional for several years (Rafael Wysocki).
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAl4u2fESHHJqd0Byand5
 c29ja2kubmV0AAoJEILEb/54YlRxvlkP/j5vDzyNUNJjnD6+897c8W+z5dwdiQfU
 QNtoopFXgw/fpOhGXRdj2mA4e6RtpU9aCCiHR6/qdh3/1qSnR5Y9R/51/gmdkwhY
 YakSxmgpgGrOJru94ApI1o/35eWwN/GxjajbfNY5ScrPQl/L0DF3iJWRsAOR5534
 p9e2gQqKecoE+MEn5JcGAXApA5xBLXuUmtWPUn5UGyhaz+jdmsf1zkDEOEvxREay
 hLGH1y6BY8HS/jytyNzISs9iDeBvg2fHmG8SskDiXVMke5sHBTU9MilgpnCFfQ0l
 OF/eNnTXTU7mAJhlnjBUt2rIe5peGSuhgg+Ur7s86xYqbj2SfsVM4UHjU0A6t9Jm
 sauWQh/Nbzw6XaCNzYKxP+dREAg0g/aq7xFqQi3bWx7YvzLk/hvNWi2+bv3adzx7
 Z3fvOki4xMXzLLrh0f1ipC8BKTsdioDZPAy06B80a0luv6ROdr6bPL7did14mWt2
 eCuPuZyXKhdV+PkjZHF+c4XT7N9NfGtE0WUQf54Q4VT00hDagGDliwXpm4ht1pjJ
 iO7uUJevXKSxMaV2xPZ+nWZaOeCVrMMTA1Ec1ELgC1n8WROZJ+SfhehgMQGp7BHS
 Hz4QO1HjTsCDnT+OU7JFeCRrkyXIlh75MOndWOOH6eTEXCAI9PihstB+UGXeNsK0
 BesNQz1sYY1O
 =g48u
 -----END PGP SIGNATURE-----

Merge tag 'pm-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management updates from Rafael Wysocki:
 "These add ACPI support to the intel_idle driver along with an admin
  guide document for it, add support for CPR (Core Power Reduction) to
  the AVS (Adaptive Voltage Scaling) subsystem, add new hardware support
  in a few places, add some new sysfs attributes, debugfs files and
  tracepoints, fix bugs and clean up a bunch of things all over.

  Specifics:

   - Update the ACPI processor driver in order to export
     acpi_processor_evaluate_cst() to the code outside of it, add ACPI
     support to the intel_idle driver based on that and clean up that
     driver somewhat (Rafael Wysocki).

   - Add an admin guide document for the intel_idle driver (Rafael
     Wysocki).

   - Clean up cpuidle core and drivers, enable compilation testing for
     some of them (Benjamin Gaignard, Krzysztof Kozlowski, Rafael
     Wysocki, Yangtao Li).

   - Fix reference counting of OPP (operating performance points) table
     structures (Viresh Kumar).

   - Add support for CPR (Core Power Reduction) to the AVS (Adaptive
     Voltage Scaling) subsystem (Niklas Cassel, Colin Ian King,
     YueHaibing).

   - Add support for TigerLake Mobile and JasperLake to the Intel RAPL
     power capping driver (Zhang Rui).

   - Update cpufreq drivers:
      - Add i.MX8MP support to imx-cpufreq-dt (Anson Huang).
      - Fix usage of a macro in loongson2_cpufreq (Alexandre Oliva).
      - Fix cpufreq policy reference counting issues in s3c and
        brcmstb-avs (chenqiwu).
      - Fix ACPI table reference counting issue and HiSilicon quirk
        handling in the CPPC driver (Hanjun Guo).
      - Clean up spelling mistake in intel_pstate (Harry Pan).
      - Convert the kirkwood and tegra186 drivers to using
        devm_platform_ioremap_resource() (Yangtao Li).

   - Update devfreq core:
      - Add 'name' sysfs attribute for devfreq devices (Chanwoo Choi).
      - Clean up the handing of transition statistics and allow them to
        be reset by writing 0 to the 'trans_stat' devfreq device
        attribute in sysfs (Kamil Konieczny).
      - Add 'devfreq_summary' to debugfs (Chanwoo Choi).
      - Clean up kerneldoc comments and Kconfig indentation (Krzysztof
        Kozlowski, Randy Dunlap).

   - Update devfreq drivers:
      - Add dynamic scaling for the imx8m DDR controller and clean up
        imx8m-ddrc (Leonard Crestez, YueHaibing).
      - Fix DT node reference counting and nitialization error code path
        in rk3399_dmc and add COMPILE_TEST and HAVE_ARM_SMCCC dependency
        for it (Chanwoo Choi, Yangtao Li).
      - Fix DT node reference counting in rockchip-dfi and make it use
        devm_platform_ioremap_resource() (Yangtao Li).
      - Fix excessive stack usage in exynos-ppmu (Arnd Bergmann).
      - Fix initialization error code paths in exynos-bus (Yangtao Li).
      - Clean up exynos-bus and exynos somewhat (Artur Świgoń, Krzysztof
        Kozlowski).

   - Add tracepoints for tracking usage_count updates unrelated to
     status changes in PM-runtime (Michał Mirosław).

   - Add sysfs attribute to control the "sync on suspend" behavior
     during system-wide suspend (Jonas Meurer).

   - Switch system-wide suspend tests over to 64-bit time (Alexandre
     Belloni).

   - Make wakeup sources statistics in debugfs cover deleted ones which
     used to be the case some time ago (zhuguangqing).

   - Clean up computations carried out during hibernation, update
     messages related to hibernation and fix a spelling mistake in one
     of them (Wen Yang, Luigi Semenzato, Colin Ian King).

   - Add mailmap entry for maintainer e-mail address that has not been
     functional for several years (Rafael Wysocki)"

* tag 'pm-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (83 commits)
  cpufreq: loongson2_cpufreq: adjust cpufreq uses of LOONGSON_CHIPCFG
  intel_idle: Clean up irtl_2_usec()
  intel_idle: Move 3 functions closer to their callers
  intel_idle: Annotate initialization code and data structures
  intel_idle: Move and clean up intel_idle_cpuidle_devices_uninit()
  intel_idle: Rearrange intel_idle_cpuidle_driver_init()
  intel_idle: Clean up NULL pointer check in intel_idle_init()
  intel_idle: Fold intel_idle_probe() into intel_idle_init()
  intel_idle: Eliminate __setup_broadcast_timer()
  cpuidle: fix cpuidle_find_deepest_state() kerneldoc warnings
  cpuidle: sysfs: fix warnings when compiling with W=1
  cpuidle: coupled: fix warnings when compiling with W=1
  cpufreq: brcmstb-avs: fix imbalance of cpufreq policy refcount
  PM: suspend: Add sysfs attribute to control the "sync on suspend" behavior
  PM / devfreq: Add debugfs support with devfreq_summary file
  Documentation: admin-guide: PM: Add intel_idle document
  cpuidle: arm: Enable compile testing for some of drivers
  PM-runtime: add tracepoints for usage_count changes
  cpufreq: intel_pstate: fix spelling mistake: "Whethet" -> "Whether"
  PM: hibernate: fix spelling mistake "shapshot" -> "snapshot"
  ...
 2020-01-27 11:23:54 -08:00
Linus Torvalds
aae1464f46 regulator: Updates for v5.6 
Hardly anything going on in the core this time around with the regulator
 API and pretty quiet on the driver front:
 
  - An API for comparing regulators, useful for devices that need to
    check if supply voltages exactly match rather than just nominally
    match.
  - Conversion of several DT bindings to YAML format.
  - Conversion of I2C drivers to probe_new().
  - New drivers for Monolithic MPQ7920 and MP8859, and Rohm BD71828.
 -----BEGIN PGP SIGNATURE-----
 
 iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAl4vH54THGJyb29uaWVA
 a2VybmVsLm9yZwAKCRAk1otyXVSH0J3sB/9vdpvQa2ei2jyEna4w0ynscV/6HFbF
 br6U3E7gDzeyNHCz11x8q8cJidD20t44ICitSJkVsjbiJenRbDmrwUpCccCTS/fH
 byhirQTr+j9+4I/F4U26dpUU3ApOdT2Lsgm3C/SSQHjXg9BuyfdQYXIZjGpPns5F
 hD/ujf4n+2rPACnWiZC37a781Uct42OHM+ewRCMNdi7pm8lZuEE5edZ+HE+ipT/e
 QE9ZTXuNvpKOT1LRenXGiv03y3SJHFqRynjWBI5PLTFTO3dg5gY+mEWusLoSufas
 F3fZtOw0Q1kI7R/SPteYDT5l/htnKJA2g2VHTgwvgObUFSdwM4Eq4efj
 =++OR
 -----END PGP SIGNATURE-----

Merge tag 'regulator-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator updates from Mark Brown:
 "Hardly anything going on in the core this time around with the
  regulator API and pretty quiet on the driver front:

   - An API for comparing regulators, useful for devices that need to
     check if supply voltages exactly match rather than just nominally
     match.

   - Conversion of several DT bindings to YAML format.

   - Conversion of I2C drivers to probe_new().

   - New drivers for Monolithic MPQ7920 and MP8859, and Rohm BD71828"

* tag 'regulator-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (34 commits)
  dt-bindings: regulator: add document bindings for mpq7920
  regulator: core: Fix exported symbols to the exported GPL version
  regulator: mpq7920: Fix incorrect defines
  regulator: vqmmc-ipq4019: Fix platform_no_drv_owner.cocci warnings
  regulator: vctrl-regulator: Avoid deadlock getting and setting the voltage
  regulator fix for "regulator: core: Add regulator_is_equal() helper"
  regulator: core: Add regulator_is_equal() helper
  regulator: mpq7920: Convert to use .probe_new
  regulator: mpq7920: Remove unneeded fields from struct mpq7920_regulator_info
  regulator: vqmmc-ipq4019: Trivial clean up
  regulator: vqmmc-ipq4019: Remove ipq4019_regulator_remove
  regulator: bindings: Drop document bindings for mpq7920
  dt-bindings: Drop entry for Monolithic Power System, MPS
  regulator: bd718x7: Simplify the code by removing struct bd718xx_pmic_inits
  regulator: add IPQ4019 SDHCI VQMMC LDO driver
  regulator: Convert i2c drivers to use .probe_new
  regulator: mpq7920: Check the correct variable in mpq7920_regulator_register()
  regulator: mpq7920: Fix Woverflow warning on conversion
  regulator: mp8859: tidy up white space in probe
  regulator: mpq7920: add mpq7920 regulator driver
  ...
 2020-01-27 11:18:55 -08:00
Linus Torvalds
1e1ab4ba47 spi: Updates for v5.6 
Not much going on in the core for SPI this time but a reasonable amount
 of change in the drivers:
 
  - Removal of dmal_request_slave_channel() from Peter Ujfalusi.
  - More conversions of drivers to GPIO descriptors from Linus Walleij.
  - A big rework of the sh-msiof driver from Geert Uytterhoeven moving it
    over to the generic native chipselect support.
  - DMA support for the uniphier driver from Kunihiko Hayashi.
  - New driver support for HiSilcon v3xx SPI NOR controllers from John
    Garry.
 -----BEGIN PGP SIGNATURE-----
 
 iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAl4vF48THGJyb29uaWVA
 a2VybmVsLm9yZwAKCRAk1otyXVSH0F9iB/9UPRQgtoC3ezq7eW/1zYWMhoEYoGqX
 DwqMwucUMdxh/xnxCu6TTZKUPJ0lceZJ/MZNAh5aHd/iWQKRYs8hJEyoDIGAchs8
 dGJE5DTo+M/PJKtC99s/9mrIKObexHY9QPkIc8tTVWWNBLoZs0JdfHh1XySHEyNv
 /tXbVetuSTMfvm15mPWzeM+lBpvsII9FA70vQKXPYLTnGoNSc3Xx90GDFsNEMXQO
 CN1+FOSXZepKqhAw+YcKdzOM7yOx5xksvQNIbzLYXnIygXRjqf5sGR6ZJhAGoAGB
 BhqRihNERn2KlWR733QVe7uDTwGIkQuVJC5mqNRZkYEbOHHKS2jX9F9L
 =Hlbb
 -----END PGP SIGNATURE-----

Merge tag 'spi-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi

Pull spi updates from Mark Brown:
 "Not much going on in the core for SPI this time but a reasonable
  amount of change in the drivers:

   - Removal of dmal_request_slave_channel() from Peter Ujfalusi.

   - More conversions of drivers to GPIO descriptors from Linus Walleij.

   - A big rework of the sh-msiof driver from Geert Uytterhoeven moving
     it over to the generic native chipselect support.

   - DMA support for the uniphier driver from Kunihiko Hayashi.

   - New driver support for HiSilcon v3xx SPI NOR controllers from John
     Garry"

* tag 'spi-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (52 commits)
  dt-binding: spi: add NPCM PSPI reset binding
  spi: pxa2xx: Avoid touching SSCR0_SSE on MMP2
  spi: spi-fsl-qspi: Ensure width is respected in spi-mem operations
  spi: npcm-pspi: modify reset support
  spi: npcm-pspi: improve spi transfer performance
  spi: spi-ti-qspi: fix warning
  spi: npcm-pspi: fix 16 bit send and receive support
  spi: pxa2xx: Add support for Intel Comet Lake PCH-V
  spi: fsl: simplify error path in of_fsl_spi_probe()
  spi: fsl-lpspi: fix only one cs-gpio working
  spi: spi-ti-qspi: optimize byte-transfers
  spi: spi-ti-qspi: support large flash devices
  spi: spi-qcom-qspi: Use device managed memory for clk_bulk_data
  MAINTAINERS: Add a maintainer for the HiSilicon v3xx SFC driver
  spi: Add HiSilicon v3xx SPI NOR flash controller driver
  dt-bindings: spi_atmel: add microchip,sam9x60-spi
  spi: bcm2835: Raise maximum number of slaves to 4
  spi: sh-msiof: Do not redefine STR while compile testing
  spi: rspi: Add support for GPIO chip selects
  spi: rspi: Add support for multiple native chip selects
  ...
 2020-01-27 11:15:34 -08:00
Linus Torvalds
a5b871c91d dmaengine updates for v5.6-rc1 
- Core:
    - Support for dynamic channels
    - Removal of various slave wrappers
    - Make few slave request APIs as private to dmaengine
    - Symlinks between channels and slaves
    - Support for hotplug of controllers
    - Support for metadata_ops for dma_async_tx_descriptor
    - Reporting DMA cached data amount
    - Virtual dma channel locking updates
 
  - New drivers/device/feature support support:
    - Driver for Intel data accelerators
    - Driver for TI K3 UDMA
    - Driver for PLX DMA engine
    - Driver for hisilicon Kunpeng DMA engine
    - Support for eDMA support for QorIQ LS1028A in fsl edma driver
    - Support for cyclic dma in sun4i driver
    - Support for X1830 in JZ4780 driver
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE+vs47OPLdNbVcHzyfBQHDyUjg0cFAl4u+QkACgkQfBQHDyUj
 g0cCcg//awBruofTHIrBOwHmCX1a09mw5WmkFG48N7tYp4fvaI1aOgs3hH9PZiBG
 fFZUktodwYpEKg6JJOfm1RnLBuKm0+3zmaKGPdK1RcbaDURh8G9qhW65f4mfImvB
 GXlgw59WKtgPAM9zWW9UxjugAk4DBte5xVKYJUsI0t4P7k9TM4i0Fv0VmMUhhDuo
 buPD1cM/GWFHbE7OYJ51aGRtrOHV1nPgQaHBkWaT7EotzGsZ3gtWYzteI3BRXRV/
 IkSgxOefMkIgu1j3KIxFZ1CJDHCZSnx2B+AEMCcp63osyeHBOYoL7KQxo6tBjaRV
 fbCasbkTkvvJUjyZdtOdU2wqf7ZqoDkD+n5nkpENf4G1M8J5RiHmrFq96m3HRonE
 V1bmMslXhsJlvtoT6ec2iJFchiq0nx1XHyST6faUOK+0cd1lzbogWwztydQH4fwd
 TxfEd+eYlFFu3lGDfRp14Tz7fAcFNPZ2bJQhZkF6RpwUW3y3L0cJc3Y0AcWmNkvJ
 oStvTlbbUvgRgO7rvEyAmdPb31lE6PLaA0WCahcvf4zQxxNMyYyaWP73MegvqJGO
 pfJXBOWBTTKwu0fDR5UHJd3tEDABvcZnwBaCSYrpI5f9bJ4NRI3f4DIMwLBnw9IK
 aH6pzwo4gTAMuvxzq8KeTp3hU7kszyUN8q8hiTZlgVozMLKXhQY=
 =mv1v
 -----END PGP SIGNATURE-----

Merge tag 'dmaengine-5.6-rc1' of git://git.infradead.org/users/vkoul/slave-dma

Pull dmaengine updates from Vinod Koul:
 "This time we have a bunch of core changes to support dynamic channels,
  hotplug of controllers, new apis for metadata ops etc along with new
  drivers for Intel data accelerators, TI K3 UDMA, PLX DMA engine and
  hisilicon Kunpeng DMA engine. Also usual assorted updates to drivers.

  Core:
   - Support for dynamic channels
   - Removal of various slave wrappers
   - Make few slave request APIs as private to dmaengine
   - Symlinks between channels and slaves
   - Support for hotplug of controllers
   - Support for metadata_ops for dma_async_tx_descriptor
   - Reporting DMA cached data amount
   - Virtual dma channel locking updates

  New drivers/device/feature support support:
   - Driver for Intel data accelerators
   - Driver for TI K3 UDMA
   - Driver for PLX DMA engine
   - Driver for hisilicon Kunpeng DMA engine
   - Support for eDMA support for QorIQ LS1028A in fsl edma driver
   - Support for cyclic dma in sun4i driver
   - Support for X1830 in JZ4780 driver"

* tag 'dmaengine-5.6-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (62 commits)
  dmaengine: Create symlinks between DMA channels and slaves
  dmaengine: hisilicon: Add Kunpeng DMA engine support
  dmaengine: idxd: add char driver to expose submission portal to userland
  dmaengine: idxd: connect idxd to dmaengine subsystem
  dmaengine: idxd: add descriptor manipulation routines
  dmaengine: idxd: add sysfs ABI for idxd driver
  dmaengine: idxd: add configuration component of driver
  dmaengine: idxd: Init and probe for Intel data accelerators
  dmaengine: add support to dynamic register/unregister of channels
  dmaengine: break out channel registration
  x86/asm: add iosubmit_cmds512() based on MOVDIR64B CPU instruction
  dmaengine: ti: k3-udma: fix spelling mistake "limted" -> "limited"
  dmaengine: s3c24xx-dma: fix spelling mistake "to" -> "too"
  dmaengine: Move dma_get_{,any_}slave_channel() to private dmaengine.h
  dmaengine: Remove dma_request_slave_channel_compat() wrapper
  dmaengine: Remove dma_device_satisfies_mask() wrapper
  dt-bindings: fsl-imx-sdma: Add i.MX8MM/i.MX8MN/i.MX8MP compatible string
  dmaengine: zynqmp_dma: fix burst length configuration
  dmaengine: sun4i: Add support for cyclic requests with dedicated DMA
  dmaengine: fsl-qdma: fix duplicated argument to &&
  ...
 2020-01-27 10:55:50 -08:00
Linus Torvalds
08c49dc135 platform-drivers-x86 for v5.6-1 
* Enable thermal policy for ASUS TUF FX705DY/FX505DY
 * Support left round button on ASUS N56VB
 * Support new Mellanox platforms of basic class VMOD0009 and VMOD0010
 * Intel Comet Lake, Tiger Lake and Elkhart Lake support in the PMC driver
 * Big clean up to Intel PMC core, PMC IPC and SCU IPC drivers
 * Touchscreen support for the PiPO W11 tablet
 
 The following is an automated git shortlog grouped by driver:
 
 asus-nb-wmi:
  -  Support left round button on N56VB
 
 asus-wmi:
  -  Fix keyboard brightness cannot be set to 0
  -  Set throttle thermal policy to default
  -  Support throttle thermal policy
 
 Documentation/ABI:
  -  Add new attribute for mlxreg-io sysfs interfaces
  -  Style changes
  -  Add missed attribute for mlxreg-io sysfs interfaces
  -  Fix documentation inconsistency for mlxreg-io sysfs interfaces
 
 GPD pocket fan:
  -  Allow somewhat lower/higher temperature limits
  -  Use default values when wrong modparams are given
 
 intel_atomisp2_pm:
  -  Spelling fixes
  -  Refactor timeout loop
 
 intel_mid_powerbtn:
  -  Take a copy of ddata
 
 intel_pmc_core:
  -  update Comet Lake platform driver
  -  Fix spelling of MHz unit
  -  Fix indentation in function definitions
  -  Put more stuff under #ifdef DEBUG_FS
  -  Respect error code of kstrtou32_from_user()
  -  Add Intel Elkhart Lake support
  -  Add Intel Tiger Lake support
  -  Make debugfs entry for pch_ip_power_gating_status conditional
  -  Create platform dependent bitmap structs
  -  Remove unnecessary assignments
  -  Clean up: Remove comma after the termination line
 
 intel_pmc_ipc:
  -  Switch to use driver->dev_groups
  -  Propagate error from kstrtoul()
  -  Use octal permissions in sysfs attributes
  -  Get rid of unnecessary includes
  -  Drop ipc_data_readb()
  -  Drop intel_pmc_gcr_read() and intel_pmc_gcr_write()
  -  Make intel_pmc_ipc_raw_cmd() static
  -  Make intel_pmc_ipc_simple_command() static
  -  Make intel_pmc_gcr_update() static
 
 intel_scu_ipc:
  -  Reformat kernel-doc comments of exported functions
  -  Drop intel_scu_ipc_raw_command()
  -  Drop intel_scu_ipc_io[read|write][8|16]()
  -  Drop unused macros
  -  Drop unused prototype intel_scu_ipc_fw_update()
  -  Sleeping is fine when polling
  -  Drop intel_scu_ipc_i2c_cntrl()
  -  Remove Lincroft support
  -  Add constants for register offsets
  -  Fix interrupt support
 
 intel_scu_ipcutil:
  -  Remove default y from Kconfig
 
 intel_telemetry_debugfs:
  -  Respect error code of kstrtou32_from_user()
 
 intel_telemetry_pltdrv:
  -  use devm_platform_ioremap_resource()
 
 mlx-platform:
  -  Add support for next generation systems
  -  Add support for new capability register
  -  Add support for new system type
  -  Set system mux configuration based on system type
  -  Add more definitions for system attributes
  -  Cosmetic changes
 
 platform/mellanox:
  -  mlxreg-hotplug: Add support for new capability register
  -  fix potential deadlock in the tmfifo driver
 
 tools/power/x86/intel-speed-select:
  -  Update version
  -  Change the order for clos disable
  -  Fix result display for turbo-freq auto mode
  -  Add support for core-power discovery
  -  Allow additional core-power mailbox commands
  -  Update MAINTAINERS for the intel uncore frequency control
  -  Add support for Uncore frequency control
 
 touchscreen_dmi:
  -  Fix indentation in several places
  -  Add info for the PiPO W11 tablet
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEqaflIX74DDDzMJJtb7wzTHR8rCgFAl4uxRcACgkQb7wzTHR8
 rCjV3xAArz8e4FmFRe77LF83BHduBYkMjnobDFqWa+BhUicapezU4121K/k1cSBi
 MRhYOK3+lZvMqFTbjFatgkCapjma34+6xMJztrT/drCgmxHzsLQgJsmJ3pXWqnYM
 t4CcPOjvjmZbNJT0NdKjeNyCwFGG6Lupf82fVfIXIshtaKE3xw51242+PJEI978i
 2VL3Ck0NL1stgUkKf/ppHkqsjLb0s6IBtgWv052s/0SlHT7RlFAonsCBxIktVa5L
 divCtnWJKRhbalCPnKOJ1Q6/kpR/BSNq6OddcgaACKH9i0d5KwtdNDdQ66FkEidN
 4rKK3gYMLRpgpLjApH91n7jWMQUaJawVN/3WuRfdnwQOcJ/PVY5vosv2yHKMy3yB
 mFLG0G2v3cXEmvRNEyeKBpSkOrAnsoylFt8zLN6/OP3cQ/jdrnq+UpurxRnBEGkm
 ZDbs5FYqjAPMyjL+/ldhndIdIqvusVgrl2V93BuAzN080UvkQ2FKjLnk0Dkc/xmZ
 XbXUAn+BCUpmABstLa7NJGruV3O9IdiSLHW5Cr0NZC74h4nHqDS57At7LkQbphkC
 Pt/+7tirpaEvSbgQZsVI0WfOwDjJf79FT4dYtCY1GkmSvmvF+OUgKicfEZsfuDan
 hLez0resoJkHLeJtcrF1lW3l3kyMaokBmkUhB1skOYlLUvcsOwg=
 =rMop
 -----END PGP SIGNATURE-----

Merge tag 'platform-drivers-x86-v5.6-1' of git://git.infradead.org/linux-platform-drivers-x86

Pull x86 platform driver updates from Andy Shevchenko:

 - Enable thermal policy for ASUS TUF FX705DY/FX505DY

 - Support left round button on ASUS N56VB

 - Support new Mellanox platforms of basic class VMOD0009 and VMOD0010

 - Intel Comet Lake, Tiger Lake and Elkhart Lake support in the PMC
   driver

 - Big clean-up to Intel PMC core, PMC IPC and SCU IPC drivers

 - Touchscreen support for the PiPO W11 tablet

* tag 'platform-drivers-x86-v5.6-1' of git://git.infradead.org/linux-platform-drivers-x86: (64 commits)
  platform/x86: intel_pmc_ipc: Switch to use driver->dev_groups
  platform/x86: intel_pmc_ipc: Propagate error from kstrtoul()
  platform/x86: intel_pmc_ipc: Use octal permissions in sysfs attributes
  platform/x86: intel_pmc_ipc: Get rid of unnecessary includes
  platform/x86: intel_pmc_ipc: Drop ipc_data_readb()
  platform/x86: intel_pmc_ipc: Drop intel_pmc_gcr_read() and intel_pmc_gcr_write()
  platform/x86: intel_pmc_ipc: Make intel_pmc_ipc_raw_cmd() static
  platform/x86: intel_pmc_ipc: Make intel_pmc_ipc_simple_command() static
  platform/x86: intel_pmc_ipc: Make intel_pmc_gcr_update() static
  platform/x86: intel_scu_ipc: Reformat kernel-doc comments of exported functions
  platform/x86: intel_scu_ipc: Drop intel_scu_ipc_raw_command()
  platform/x86: intel_scu_ipc: Drop intel_scu_ipc_io[read|write][8|16]()
  platform/x86: intel_scu_ipc: Drop unused macros
  platform/x86: intel_scu_ipc: Drop unused prototype intel_scu_ipc_fw_update()
  platform/x86: intel_scu_ipc: Sleeping is fine when polling
  platform/x86: intel_scu_ipc: Drop intel_scu_ipc_i2c_cntrl()
  platform/x86: intel_scu_ipc: Remove Lincroft support
  platform/x86: intel_scu_ipc: Add constants for register offsets
  platform/x86: intel_scu_ipc: Fix interrupt support
  platform/x86: intel_scu_ipcutil: Remove default y from Kconfig
  ...
 2020-01-27 10:42:35 -08:00
Linus Torvalds
9e1af7567b MMC core: 
- Convert to reasonable timeouts for all CMD6 commands (updates for BKOPS,
    CACHE_FLUSH and INAND_CMD38_ARG_EXT_CSD) for eMMC
  - Respect f_max clock rate at card initialization
  - Add gpiod_toggle_active_low() API
  - Consolidate slot-gpio code by using gpiod_toggle_active_low()
 
 MMC host:
  - Add pinctrl_select_default_state() API
  - Consolidate pintctrl code by using pinctrl_select_default_state()
  - mmci: Support any block sizes for SDIO for some variants
  - mmci: Enable reset control for stm32_sdmmc
  - mmc_spi: Toggle SPI_CS_HIGH polarity rather than hard-coding it
  - renesas_sdhi: Add support for the r8a77961 variant
  - renesas_sdhi: A few minor improvements
  - rockchip-dw-mshc: Add support for the rk3308 variant
  - sdhci: Enable support for external DMA controllers
  - sdhci: Fixup error path when sending CMD12
  - sdhci-brcmstb: Add support for 7216b0 variant
  - sdhci-brcmstb: Add support for command queuing (CQHCI)
  - sdhci-brcmstb: Add support for eMMC HS400ES mode
  - sdhci-msm: Add support for the sc7180 variant
  - sdhci-msm: Add support for command queuing (CQHCI)
  - sdhci-of-at91: Add support for the SAM9x60 variant
  - sdhci-of-at91: Improve support for tunings
  - sdhci-of-esdhc: A few fixups for some clock related issues
  - sdhci-omap: Add support for the am335x and the am437x variants
  - sdhci-omap: Improve support for erase operations
  - sdhci-omap: Add support for external DMA
 -----BEGIN PGP SIGNATURE-----
 
 iQJLBAABCgA1FiEEugLDXPmKSktSkQsV/iaEJXNYjCkFAl4uww8XHHVsZi5oYW5z
 c29uQGxpbmFyby5vcmcACgkQ/iaEJXNYjClg8w/+Iv7Emp5oBmj0aY9BA2rWpOVj
 rNPynDbRPI0qrrQPqXrZ/UdGDc6lgWHoeHdtv70u8WK8UEgi/OYw7PlE3eij9DGB
 VcOnMyDg+Q6+Hq3vjvADWZzNrHGjdvjcGLxx386DHpTCsc1zD3EL2AG5e6i2/dfH
 /FiSdfxVtRKw4GEn5jIDhHh63Av8mMCaPPfLw0DKxMQIuJ3atMvplgsr1KXIAydo
 QTjKWxDJDJnKddtdHcnjP9Tck+ksrATDHHHQ9qGVFuOr3Yy9TgvOMlLo8vxJ364l
 3bIwYfbaeE4/NKvqJGDzIF1jr4R5JoHZhvHLGqr+hUwMzxnwcbyCUSghk87oOqMt
 FKAfKqwdEvVyq8QnmV9ArPXRnVmW4ElJN3edTeC00/7MoxWIx2TRHvEO5HejqPkq
 +kw0NEIqWWiztV3/aa5zFJtlp8QphwsopvLzwEAJB+1G0tiSiNcfokrJ0AyODC5/
 K4kXTGfQh28RSIr6ait7FNphyOug1WAvXqvt3ydY1lQPH0G36DMzLMx06mjgTA4O
 DNYXzLoLPzRaPU4NvpHu3/axgRLYCN3CbGdx3U8GT9wgmerRyY/jW9ldSF7w6Wim
 W0Zx1j3SdvmgafMXVsFcxMUC0IvfOFiMzXJ6DOus37xTYLRKW40wttg9SSxtm+9E
 3IfRRlXnlkHVvTZ1ewI=
 =L0cJ
 -----END PGP SIGNATURE-----

Merge tag 'mmc-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc

Pull MMC updates from Ulf Hansson:
 "There are no updates for the MEMSTICK subsystem this time. But note
  that I am also carrying a patch from the pinctrl tree, which has been
  shared through an immutable branch.

  Summary:

  MMC core:
   - Convert to reasonable timeouts for all CMD6 commands (updates for
     BKOPS, CACHE_FLUSH and INAND_CMD38_ARG_EXT_CSD) for eMMC
   - Respect f_max clock rate at card initialization
   - Add gpiod_toggle_active_low() API
   - Consolidate slot-gpio code by using gpiod_toggle_active_low()

  MMC host:
   - Add pinctrl_select_default_state() API
   - Consolidate pintctrl code by using pinctrl_select_default_state()
   - mmci: Support any block sizes for SDIO for some variants
   - mmci: Enable reset control for stm32_sdmmc
   - mmc_spi: Toggle SPI_CS_HIGH polarity rather than hard-coding it
   - renesas_sdhi: Add support for the r8a77961 variant
   - renesas_sdhi: A few minor improvements
   - rockchip-dw-mshc: Add support for the rk3308 variant
   - sdhci: Enable support for external DMA controllers
   - sdhci: Fixup error path when sending CMD12
   - sdhci-brcmstb: Add support for 7216b0 variant
   - sdhci-brcmstb: Add support for command queuing (CQHCI)
   - sdhci-brcmstb: Add support for eMMC HS400ES mode
   - sdhci-msm: Add support for the sc7180 variant
   - sdhci-msm: Add support for command queuing (CQHCI)
   - sdhci-of-at91: Add support for the SAM9x60 variant
   - sdhci-of-at91: Improve support for tunings
   - sdhci-of-esdhc: A few fixups for some clock related issues
   - sdhci-omap: Add support for the am335x and the am437x variants
   - sdhci-omap: Improve support for erase operations
   - sdhci-omap: Add support for external DMA"

* tag 'mmc-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (89 commits)
  mmc: core: Default to generic_cmd6_time as timeout in __mmc_switch()
  mmc: block: Use generic_cmd6_time when modifying INAND_CMD38_ARG_EXT_CSD
  mmc: core: Specify timeouts for BKOPS and CACHE_FLUSH for eMMC
  mmc: sdhci-cadence: remove unneeded 'inline' marker
  dt-bindings: mmc: rockchip-dw-mshc: add description for rk3308
  dt-bindings: mmc: convert rockchip dw-mshc bindings to yaml
  dt-bindings: mmc: convert synopsys dw-mshc bindings to yaml
  mmc: sdhci-msm: Add CQHCI support for sdhci-msm
  mmc: sdhci: Let a vendor driver supply and update ADMA descriptor size
  mmc: sdhci-of-esdhc: fix serious issue clock is always disabled
  mmc: sdhci-of-esdhc: fix transfer mode register reading
  mmc: sdhci-brcmstb: Fix incorrect switch to HS mode
  mmc: sdhci-brcmstb: Add support for Command Queuing (CQE)
  mmc: sdhci-brcmstb: Add shutdown callback
  mmc: sdhci-brcmstb: Fix driver to defer on clk_get defer
  mmc: sdhci-brcmstb: Add ability to use HS400ES transfer mode
  dt-bindings: mmc: brcm,sdhci-brcmstb: Add support for 7216b0
  mmc: core: limit probe clock frequency to configured f_max
  mmc: sdhci-milbeaut: Remove redundant platform_get_irq error message
  mmc: sdhci: fix an issue of mixing different types
  ...
 2020-01-27 10:30:42 -08:00
Linus Torvalds
b9b627a449 * Core changes: 
- Make i3c_bus_set_mode() static
 
 * Driver changes:
   - Add a per-SoC data_hold_delay property to the Cadence driver
   - Fix formatting issues in the 'CADENCE I3C MASTER IP' MAINTAINERS entry
   - Use devm_platform_ioremap_resource() where appropriate
   - Adjust DesignWare reattach logic
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEKmCqpbOU668PNA69Ze02AX4ItwAFAl4un/cACgkQZe02AX4I
 twAdDRAApE2zF/mFpKWsEeRMslBUIu5Ke1sPC/gWqQ0NcisW1jVvbFQxoXBLJ3f2
 z41cqEtwKVGXGZGWRvMeHZhlllZ+c9gO+fnCN4CLfjr03ECZ/JUpBmgpjjfFKKu9
 Y3DzXBWX73KFZbZWUDE+JsufhdJCIjr7ozk5PXniZ9nAfrFxG50pZYHtZeF3KoCl
 GLSA+emCRfQA08Kks7JGB1zPsC7gNluK2DkdU/cIRIBE8LL2VZTHpKBUPcAZOryA
 ju/0U3DGyMxrnjPoa134/EaUBpXhAuMLOxgS9nf+Jd8I1AMm4BeG5Bw2g30Bp50D
 BTq3FNZX2Ihb+tEeZQaVFRazTHyMXwVCg9v26NXI89BIpDPFI7dsFd2C3lO/DtCM
 kEUpk0oplxTYV6ryOgDaBpE9CsS6mxayaxVnKvB7dXobU6/F4Qu23n1BrjlxYrmK
 wuIwcGMLzvlbBjm6EVPvFlJXGmDB5ndwMVVdqEEyFVzAB5xonN4gKXsQb7vcOQTn
 fh7/zvN/isr6g9BwyDl5qmq94ibTBu7ruhgkl1xiSsTHYHp2UipeiOY6ixveJt4U
 9WPBZeDVpcz+k+5Y4BPSRnXAIA3N/GM1BwS9Ku1oE1FeoavG8ziLHkcTL7MHeGKp
 RUfvxA4k8PioHERX1aZIg88MYqRBp4PTVh/g4HPw4gTfBOvGnX8=
 =LbKo
 -----END PGP SIGNATURE-----

Merge tag 'i3c/for-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux

Pull i3c updates from Boris Brezillon:
 "Core changes:

   - Make i3c_bus_set_mode() static

  Driver changes:

   - Add a per-SoC data_hold_delay property to the Cadence driver

   - Fix formatting issues in the 'CADENCE I3C MASTER IP' MAINTAINERS
     entry

   - Use devm_platform_ioremap_resource() where appropriate

   - Adjust DesignWare reattach logic"

* tag 'i3c/for-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
  i3c: master: dw: reattach device on first available location of address table
  i3c: master: cdns: convert to devm_platform_ioremap_resource
  i3c: master: dw: convert to devm_platform_ioremap_resource
  MAINTAINERS: fix style in CADENCE I3C MASTER IP entry
  i3c: master: make i3c_bus_set_mode static
  i3c: master: cdns: add data hold delay support
 2020-01-27 10:28:43 -08:00
Linus Torvalds
35417d57ef hwmon updates for v5.6 
core:
 - Add support for enable attributes to hwmon core
 - Add intrusion templates
 
 pmbus:
 - Support for Infineon Multi-phase xdpe122 family controllers
 - Support for Intel IMVP9 and AMD 6.25mV modes
 - Support for vid mode detection per page bases
 - Detect if chip is write protected
 - Support for MAX20730, MAX20734, MAX20743, MAX20796, UCD90320, TPS53688
 - Various improvements to ibm-cffps driver
 
 k10temp:
 - Support for additional temperature sensors as well as voltage and
   current telemetry for Zen CPUs
 
 w83627ehf:
 - Remove support for NCT6775, NCT6776 (they have their own driver)
 
 New drivers:
 - ADM1177
 - MAX31730
 - Driver for disk and solid state drives with temperature sensors
 
 Other:
 - pwm-fan: stop fan on shutdown
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEiHPvMQj9QTOCiqgVyx8mb86fmYEFAl4s++oACgkQyx8mb86f
 mYFzzhAAjh2FQ2T6TPe+C+JA68ysLGsMCtlfGFWK3GS/pF0CUvr+/nA2FPwQ6ydX
 Sj+RzjS/CjgrAhabmUvpmRxJZUFFfu96LXCn6p4eaOnIqNMz2UIb+4xIZYMqn+CD
 kJH3dse7EOlWDk+gHyvkwFtOaye9xV/L9F4C7cKWwKdFYhQad3xA0eARHpNVCaA5
 BG33q+PVDx1gc/8C4JwLfqiF/IXExt9RV7akhoHMYHyJEpF4lD8X+/oTPjc/jbo7
 EfpIY6/0zBt3+TVMXRd7Kg1IcTDt8iePd7tVOFrL8ZIel+Elv/Fy7HyXm9dFC6zM
 r3b008XfVWSrk10ezOc7YOYKCv0mODuDzute8rzEA+LJSNIMRSorFzo3BezFex1L
 GZTZfThpeZXZ2pwu0BMkO8teYP1JpVaxgsE/PDKkgcpfGCloISoNft8DkPIdhB9K
 lf3iuPT+kX5h6/AMb6XD4PlA1bXb9Uj4FCS9KonbTKqEjwu6N2lE9kCA3Q7nvyaE
 PbEl/AF3DRGZXMAv/C6yJomsmOlUodolZEOa4tGXsTh1clSvgHOEllGtCLLTPkYS
 FOYmoReA54oz562e6WdhUtaMaS/O7pZRK9rwufng6qq+81VM1Ta5HcOSoK0kZrW4
 fs93B0TfmdP7szMr3HaFH1Xlh6eYGj/dYUabNuAfCKAKMTBdgmI=
 =rfbE
 -----END PGP SIGNATURE-----

Merge tag 'hwmon-for-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon updates from Guenter Roeck:
 "core:
   - Add support for enable attributes to hwmon core
   - Add intrusion templates

  pmbus:
   - Support for Infineon Multi-phase xdpe122 family controllers
   - Support for Intel IMVP9 and AMD 6.25mV modes
   - Support for vid mode detection per page bases
   - Detect if chip is write protected
   - Support for MAX20730, MAX20734, MAX20743, MAX20796, UCD90320,
     TPS53688
   - Various improvements to ibm-cffps driver

  k10temp:
   - Support for additional temperature sensors as well as voltage and
     current telemetry for Zen CPUs

  w83627ehf:
   - Remove support for NCT6775, NCT6776 (they have their own driver)

  New drivers:
   - ADM1177
   - MAX31730
   - Driver for disk and solid state drives with temperature sensors

  Other:
   - pwm-fan: stop fan on shutdown"

* tag 'hwmon-for-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (35 commits)
  hwmon: (k10temp) Display up to eight sets of CCD temperatures
  hwmon: (k10temp) Add debugfs support
  hwmon: (k10temp) Don't show temperature limits on Ryzen (Zen) CPUs
  hwmon: (k10temp) Show core and SoC current and voltages on Ryzen CPUs
  hwmon: (k10temp) Report temperatures per CPU die
  hmon: (k10temp) Convert to use devm_hwmon_device_register_with_info
  hwmon: (k10temp) Use bitops
  hwmon: (pwm-fan) stop fan on shutdown
  MAINTAINERS: add entry for ADM1177 driver
  dt-binding: hwmon: Add documentation for ADM1177
  hwmon: (adm1177) Add ADM1177 Hot Swap Controller and Digital Power Monitor driver
  docs: hwmon: Include 'xdpe12284.rst' into docs
  hwmon: (pmbus) Add support for Infineon Multi-phase xdpe122 family controllers
  hwmon: (pmbus/tps53679) Extend device list supported by driver
  hwmon: (pmbus/core) Add support for Intel IMVP9 and AMD 6.25mV modes
  hwmon: (pmbus/core) Add support for vid mode detection per page bases
  hwmon: (pmbus/ibm-cffps) Prevent writing on_off_config with bad data
  hwmon: (w83627ehf) Remove set but not used variable 'fan4min'
  hwmon: Driver for disk and solid state drives with temperature sensors
  hwmon: (pmbus/ibm-cffps) Fix the LED behavior when turned off
  ...
 2020-01-27 09:14:11 -08:00
Sunil Goutham
688b3e829d MAINTAINERS: Add entry for Marvell OcteonTX2 Physical Function driver 
Added maintainers entry for Marvell OcteonTX2 SOC's physical
function NIC driver.

Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
 2020-01-27 14:33:40 +01:00
Sunil Goutham
493aeb26e1 Documentation: net: octeontx2: Add RVU HW and drivers overview 
Added high level overview of OcteonTx2 RVU HW and functionality of
various drivers which will be upstreamed.

Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
 2020-01-27 14:33:40 +01:00
Rafael J. Wysocki
c95d9c140c Merge branches 'pm-core', 'powercap', 'pm-opp', 'pm-avs' and 'pm-misc' 
* pm-core:
  PM-runtime: add tracepoints for usage_count changes

* powercap:
  powercap/intel_rapl: add support for JasperLake
  x86/cpu: Add Jasper Lake to Intel family
  powercap/intel_rapl: add support for TigerLake Mobile

* pm-opp:
  opp: Replace list_kref with a local counter
  opp: Free static OPPs on errors while adding them

* pm-avs:
  power: avs: qcom-cpr: remove duplicated include from qcom-cpr.c
  power: avs: fix uninitialized error return on failed cpr_read_fuse_uV() call
  power: avs: qcom-cpr: make cpr_get_opp_hz_for_req() static
  power: avs: qcom-cpr: remove set but unused variable
  power: avs: qcom-cpr: make sure that regmap is available
  power: avs: qcom-cpr: fix unsigned expression compared with zero
  power: avs: qcom-cpr: fix invalid printk specifier in debug print
  power: avs: Add support for CPR (Core Power Reduction)
  dt-bindings: power: avs: Add support for CPR (Core Power Reduction)

* pm-misc:
  mailmap: Add entry for <rjw@sisk.pl>
 2020-01-27 11:30:13 +01:00
David S. Miller
82bc2e4a26 wireless-drivers-next patches for v5.6 
Second set of patches for v5.6. Nothing special standing out, smaller
 new features and fixes allover.
 
 Major changes:
 
 ar5523
 
 * add support for SMCWUSBT-G2 USB device
 
 iwlwifi
 
 * support new versions of the FTM FW APIs
 
 * support new version of the beacon template FW API
 
 * print some extra information when the driver is loaded
 
 rtw88
 
 * support wowlan feature for 8822c
 
 * add support for WIPHY_WOWLAN_NET_DETECT
 
 brcmfmac
 
 * add initial support for monitor mode
 
 qtnfmac
 
 * add module parameter to enable DFS offloading in firmware
 
 * add support for STA HE rates
 
 * add support for TWT responder and spatial reuse
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJeLcWsAAoJEG4XJFUm622bDGUIAJuhM4LiDAzOGnDjH5cMosOC
 /qwDpGD19cEeVAhNSMKUn7Uo9+qbQYIleiO7XXxzCuJceYbxbT5s3Vb/fWsRUPjS
 cBDmGuK8/giqMQJshXvfCTsoF83CyirCjY/MJvomK2BRlXM8hQ3s6hAcfU0zQ96e
 OU1akcfZzUwjaBKaDYLncxLuGbeUXMy8AZwFdgQlQRMoObpen/IIwx6jDK/A+3l6
 VCOJF+JTkDytfNWmTpZ65uJrYEXoLe6G4028FjOI4BDFmEgvdHC5vTm7VOBhrkuB
 9tsKcYNvECCNn2WI96V+etD8kaZPscQIW8hgOrYyGxw43lJg5zH4Z9eWAmHojxE=
 =UOhb
 -----END PGP SIGNATURE-----

Merge tag 'wireless-drivers-next-2020-01-26' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next

Kalle Valo says:

====================
wireless-drivers-next patches for v5.6

Second set of patches for v5.6. Nothing special standing out, smaller
new features and fixes allover.

Major changes:

ar5523

* add support for SMCWUSBT-G2 USB device

iwlwifi

* support new versions of the FTM FW APIs

* support new version of the beacon template FW API

* print some extra information when the driver is loaded

rtw88

* support wowlan feature for 8822c

* add support for WIPHY_WOWLAN_NET_DETECT

brcmfmac

* add initial support for monitor mode

qtnfmac

* add module parameter to enable DFS offloading in firmware

* add support for STA HE rates

* add support for TWT responder and spatial reuse
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
 2020-01-27 11:25:36 +01:00
Rafael J. Wysocki
ff7a672f83 Merge branch 'acpica' 
* acpica:
  ACPICA: Update version to 20200110
  ACPICA: All acpica: Update copyrights to 2020 Including tool signons.
  ACPICA: Update the list of maintainers
  ACPICA: Update version to 20191213
  ACPICA: Dispatcher: always generate buffer objects for ASL create_field() operator
  ACPICA: acpisrc: add unix line ending support for non-windows build
  ACPICA: Disassembler: create buffer fields in ACPI_PARSE_LOAD_PASS1
  ACPICA: debugger: fix spelling mistake "adress" -> "address"
 2020-01-27 10:56:49 +01:00
Yangtao Li
dccc5c3b6f thermal/drivers/sun8i: Add thermal driver for H6/H5/H3/A64/A83T/R40 
This patch adds the support for allwinner thermal sensor, within
allwinner SoC. It will register sensors for thermal framework
and use device tree to bind cooling device.

Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: Ondrej Jirman <megous@megous.com>
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20191219172823.1652600-2-anarsoul@gmail.com
 2020-01-27 10:24:32 +01:00
Daniel Lezcano
23affa2e29 thermal/drivers/cpu_cooling: Rename to cpufreq_cooling 
As we introduced the idle injection cooling device called
cpuidle_cooling, let's be consistent and rename the cpu_cooling to
cpufreq_cooling as this one mitigates with OPPs changes.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Link: https://lore.kernel.org/r/20191219225317.17158-3-daniel.lezcano@linaro.org
 2020-01-27 10:24:32 +01:00
Daniel Lezcano
a4c428e523 thermal/drivers/cpu_cooling: Introduce the cpu idle cooling driver 
The cpu idle cooling device offers a new method to cool down a CPU by
injecting idle cycles at runtime.

It has some similarities with the intel power clamp driver but it is
actually designed to be more generic and relying on the idle injection
powercap framework.

The idle injection duration is fixed while the running duration is
variable. That allows to have control on the device reactivity for the
user experience.

An idle state powering down the CPU or the cluster will allow to drop
the static leakage, thus restoring the heat capacity of the SoC. It
can be set with a trip point between the hot and the critical points,
giving the opportunity to prevent a hard reset of the system when the
cpufreq cooling fails to cool down the CPU.

With more sophisticated boards having a per core sensor, the idle
cooling device allows to cool down a single core without throttling
the compute capacity of several cpus belonging to the same clock line,
so it could be used in collaboration with the cpufreq cooling device.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lore.kernel.org/r/20191219225317.17158-2-daniel.lezcano@linaro.org
 2020-01-27 10:24:32 +01:00
Ganapathi Bhat
d04bf42891 MAINTAINERS: update for mwifiex driver maintainers 
Remove Nishant Sarmukadam from Maintainer list, as he is no
longer working in NXP.

Signed-off-by: Ganapathi Bhat <ganapathi.bhat@nxp.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
 2020-01-26 13:37:40 +02:00
David S. Miller
4d8773b68e Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net 
Minor conflict in mlx5 because changes happened to code that has
moved meanwhile.

Signed-off-by: David S. Miller <davem@davemloft.net>
 2020-01-26 10:40:21 +01:00
Jon Maloy
61b1f2aff4 tipc: change maintainer email address 
Reflecting new realities.

Signed-off-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
 2020-01-25 10:18:02 +01:00
Thomas Gleixner
43ee74487b irqchip updates for Linux 5.6: 
- Conversion of the SiFive PLIC to hierarchical domains
 - New SiFive GPIO irqchip driver
 - New Aspeed SCI irqchip driver
 - New NXP INTMUX irqchip driver
 - Additional support for the Meson A1 GPIO irqchip
 - First part of the GICv4.1 support
 - Assorted fixes
 -----BEGIN PGP SIGNATURE-----
 
 iQJDBAABCgAtFiEEn9UcU+C1Yxj9lZw9I9DQutE9ekMFAl4rKn0PHG1hekBrZXJu
 ZWwub3JnAAoJECPQ0LrRPXpDHVoQALTTYQol+5Gz5pLxnROYEAdFjzrVrCarsK/b
 Cl4uVa5efOTCItSO3L9cEo1zoB++aJxPSOaKqX9hryPwPLTZzDiHYtVQ870tZB+k
 233cTvtT8+iw7/JPKnA8706TYDk1FUkJQ87V0gMLrnVH00dmJ8LvjW1bCdXV8iIa
 Ln78XIF+Ass+qJjSpCDRaOukDm6Qs+sZKAY0+nLXM8Ge564fdX7bPkDGN4tq9DLz
 74ZxY6s3rI5FoPceS270dtDf4Ib8gH+T8Bqd5AYSj/tcRE23s4muGb/O3Kez5Oko
 eEiuSadpep/kPQhgZlpX0tJgtEqHNfi6K8AIMscQQDFmJyuCqgR9/5as+UKX1V0M
 kPlOQtYCAVZmTnlOP6rA2V3RUFurVkFPkwUGzVYlCYxxrARvsH+vPxYqAPH/EEFq
 lGUo+2Z7Z+1ubPsnR8WKs8heC6qJidegGUtKoKYWroJl+tiuT6EtCP3J0QZPhdXT
 lVOBVnR6DHNIURuAEmag/eNYsBIj7PdmlByoMkBFn9LPE7Fn+OExJgbyVsu1IaTe
 AcUHmXR9QpcAKnDLmNSqFvhWsLo8CJ607rH3tL8vqnfijOHyt4AvKeE1R4QSavPx
 0F3FFNdo7Y1FAlJ9Ibw0gLvoIa6uP6FpdI3rht0iRaOZJlnDTbn+B8UayY0Ajvyp
 aGIjx7tY
 =8iz1
 -----END PGP SIGNATURE-----

Merge tag 'irqchip-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core

Pull irqchip updates from Marc Zyngier:

- Conversion of the SiFive PLIC to hierarchical domains
- New SiFive GPIO irqchip driver
- New Aspeed SCI irqchip driver
- New NXP INTMUX irqchip driver
- Additional support for the Meson A1 GPIO irqchip
- First part of the GICv4.1 support
- Assorted fixes
 2020-01-24 20:08:51 +01:00
Florian Westphal
048d19d444 mptcp: add basic kselftest for mptcp 
Add mptcp_connect tool:
xmit two files back and forth between two processes, several net
namespaces including some adding delays, losses and reordering.
Wrapper script tests that data was transmitted without corruption.

The "-c" command line option for mptcp_connect.sh is there for debugging:

The script will use tcpdump to create one .pcap file per test case, named
according to the namespaces, protocols, and connect address in use.
For example, the first test case writes the capture to
ns1-ns1-MPTCP-MPTCP-10.0.1.1.pcap.

The stderr output from tcpdump is printed after the test completes to
show tcpdump's "packets dropped by kernel" information.

Also check that userspace can't create MPTCP sockets when mptcp.enabled
sysctl is off.

The "-b" option allows to tune/lower send buffer size.
"-m mmap" can be used to test blocking io.  Default is non-blocking
io using read/write/poll.

Will run automatically on "make kselftest".

Note that the default timeout of 45 seconds is used even if there is a
"settings" changing it to 450. 45 seconds should be enough in most cases
but this depends on the machine running the tests.

A fix to correctly read the "settings" file has been proposed upstream
but not applied yet. It is not blocking the execution of these new tests
but it would be nice to have it:

  https://patchwork.kernel.org/patch/11204935/

Co-developed-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Co-developed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Co-developed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Co-developed-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Christoph Paasch <cpaasch@apple.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
 2020-01-24 13:44:08 +01:00
Mat Martineau
f870fa0b57 mptcp: Add MPTCP socket stubs 
Implements the infrastructure for MPTCP sockets.

MPTCP sockets open one in-kernel TCP socket per subflow. These subflow
sockets are only managed by the MPTCP socket that owns them and are not
visible from userspace. This commit allows a userspace program to open
an MPTCP socket with:

  sock = socket(AF_INET, SOCK_STREAM, IPPROTO_MPTCP);

The resulting socket is simply a wrapper around a single regular TCP
socket, without any of the MPTCP protocol implemented over the wire.

Co-developed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Florian Westphal <fw@strlen.de>
Co-developed-by: Peter Krystad <peter.krystad@linux.intel.com>
Signed-off-by: Peter Krystad <peter.krystad@linux.intel.com>
Co-developed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Co-developed-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Christoph Paasch <cpaasch@apple.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
 2020-01-24 13:44:07 +01:00
Johan Jonker
1eece23dba dt-bindings: mmc: convert rockchip dw-mshc bindings to yaml 
Current dts files with 'dwmmc' nodes are manually verified.
In order to automate this process rockchip-dw-mshc.txt
has to be converted to yaml. In the new setup
rockchip-dw-mshc.yaml will inherit properties from
mmc-controller.yaml and synopsys-dw-mshc-common.yaml.
'dwmmc' will no longer be a valid name for a node and
should be changed to 'mmc'.

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200116152230.29831-2-jbx6244@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
 2020-01-24 12:11:48 +01:00
Dave Jiang
bfe1d56091 dmaengine: idxd: Init and probe for Intel data accelerators 
The idxd driver introduces the Intel Data Stream Accelerator [1] that will
be available on future Intel Xeon CPUs. One of the kernel access
point for the driver is through the dmaengine subsystem. It will initially
provide the DMA copy service to the kernel.

Some of the main functionality introduced with this accelerator
are: shared virtual memory (SVM) support, and descriptor submission using
Intel CPU instructions movdir64b and enqcmds. There will be additional
accelerator devices that share the same driver with variations to
capabilities.

This commit introduces the probe and initialization component of the
driver.

[1]: https://software.intel.com/en-us/download/intel-data-streaming-accelerator-preliminary-architecture-specification

Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/157965023991.73301.6186843973135311580.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
 2020-01-24 11:18:45 +05:30
Beniamin Bia
05592bea7a MAINTAINERS: add entry for ADM1177 driver 
Add Beniamin Bia and Michael Hennerich as a maintainer for ADM1177 ADC.

Signed-off-by: Beniamin Bia <beniamin.bia@analog.com>
Link: https://lore.kernel.org/r/20200114112159.25998-3-beniamin.bia@analog.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
 2020-01-23 13:15:11 -08:00
Ooi, Joyce
81563bed1e MAINTAINERS: Replace Tien Hock Loh as Altera PIO maintainer 
This patch is to replace Tien Hock Loh as Altera PIO maintainer as he
has moved to a different role.

Signed-off-by: Ooi, Joyce <joyce.ooi@intel.com>
Link: https://lore.kernel.org/r/20200103170155.100743-1-joyce.ooi@intel.com
Acked-by: Tien Hock Loh <tien.hock.loh@intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
 2020-01-23 16:33:16 +01:00
Linus Walleij
a1dd4bfb14 intel-pinctrl for v5.6-1 
* Tiger Lake appears to have _HID enumeration, thus driver has been updated
 * Coffee Lake-S has the same IP as Sunrisepoint, thus ID has been added
 * Baytrail has got more clean ups and bug fixes, such as direct IRQ handling
 * Lynxpoint GPIO has been converted to true pin control driver
 * The common driver now uses IRQ chip enumeration via GPIO chip
 
 The following is an automated git shortlog grouped by driver:
 
 baytrail:
  -  Replace WARN with dev_info_once when setting direct-irq pin to output
  -  Do not clear IRQ flags on direct-irq enabled pins
  -  Reuse struct intel_pinctrl in the driver
  -  Use local variable to keep device pointer
  -  Keep pointer to struct device instead of its container
  -  Use GPIO direction definitions
  -  Move IRQ valid mask initialization to a dedicated callback
  -  Group GPIO IRQ chip initialization
  -  Allocate IRQ chip dynamic
 
 cherryview:
  -  Use GPIO direction definitions
 
 intel:
  -  Pass irqchip when adding gpiochip
  -  Add GPIO <-> pin mapping ranges via callback
  -  Share struct intel_pinctrl for wider use
  -  Use GPIO direction definitions
 
 lynxpoint:
  -  Update summary in the driver
  -  Switch to pin control API
  -  Add GPIO <-> pin mapping ranges via callback
  -  Implement ->pin_dbg_show()
  -  Add pin control operations
  -  Reuse struct intel_pinctrl in the driver
  -  Add pin control data structures
  -  Implement intel_gpio_get_direction callback
  -  Implement ->irq_ack() callback
  -  Move ownership check to IRQ chip
  -  Move lp_irq_type() closer to IRQ related routines
  -  Move ->remove closer to ->probe()
  -  Extract lp_gpio_acpi_use() for future use
  -  Convert unsigned to unsigned int
  -  Switch to memory mapped IO accessors
  -  Keep pointer to struct device instead of its container
  -  Relax GPIO request rules
  -  Assume 2 bits for mode selector
  -  Use standard pattern for memory allocation
  -  Use %pR to print IO resource
  -  Drop useless assignment
  -  Correct amount of pins
  -  Use raw_spinlock for locking
  -  Move GPIO driver to pin controller folder
 
 sunrisepoint:
  -  Add Coffee Lake-S ACPI ID
  -  Add missing Interrupt Status register offset
 
 tigerlake:
  -  Tiger Lake uses _HID enumeration
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEqaflIX74DDDzMJJtb7wzTHR8rCgFAl4lfB4ACgkQb7wzTHR8
 rCgy3g//VHTbsBk7+6NFXbI5iXgbU1sr9F9cIYbzawA3YLbR1Ioq9P89U3JPCeCz
 zaoxtd9HAxOxQrUFJGZKbsof6jS7Ee80mcvm0KQt2GNBmM4bZGS6qHofj5FAOxuz
 4MBjGINrlIntzG1RqjYxD+p2xuQ3p9H2yQIds9UTM1NB+hBIDLPx+3HUM2qbbf4s
 rbLQRc+kmVHoapmse6lV4lA2OyOW9BmgiTxeMaua/E6zyZ6WVNXLxXx+yXrEtUjj
 Q9M6moNZd4OP3pN/mGCyClLTMFyOcmaah6wdXy3GJRZ7/YD5+AnqbVTGsYLKy6To
 1w25Z6e6ygzbL8sqr5JwMiX9GnX6FeGEleY63zxvZ+WCC3TGWRzPWaTJuQIRToAz
 K3pdYWXOoK/J1fyzdjdkYHbqBbqjpB5oT/dWFx7Ii50kv41b8TEXPhDrWZSqvn9I
 J0KW/vICbsqPk8TBsQQ83nV6ILSTY5KakI8Qs5ngDov5oeKl0F/cLT9KqcY9nQdJ
 2mhJU5mn8cq4SvtyPD/NSRQHxX5xHx6Yi4KG2cXw0wJTZ+jP8rpl2di8ogDCFUK4
 fkQ/g+PhcPsW36kTKvLv57vhTqZ2u9rf9BcaJ7LGo9wsOjpGH6d4RCTiJ0VSn++T
 rkomWdFVgfMKmnsUwykyIV39mQzDy5e4vNO45wMs7LCimiRSkMA=
 =+ZAJ
 -----END PGP SIGNATURE-----

Merge tag 'intel-pinctrl-v5.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pinctrl/intel into devel

intel-pinctrl for v5.6-1

* Tiger Lake appears to have _HID enumeration, thus driver has been updated
* Coffee Lake-S has the same IP as Sunrisepoint, thus ID has been added
* Baytrail has got more clean ups and bug fixes, such as direct IRQ handling
* Lynxpoint GPIO has been converted to true pin control driver
* The common driver now uses IRQ chip enumeration via GPIO chip

The following is an automated git shortlog grouped by driver:

baytrail:
 -  Replace WARN with dev_info_once when setting direct-irq pin to output
 -  Do not clear IRQ flags on direct-irq enabled pins
 -  Reuse struct intel_pinctrl in the driver
 -  Use local variable to keep device pointer
 -  Keep pointer to struct device instead of its container
 -  Use GPIO direction definitions
 -  Move IRQ valid mask initialization to a dedicated callback
 -  Group GPIO IRQ chip initialization
 -  Allocate IRQ chip dynamic

cherryview:
 -  Use GPIO direction definitions

intel:
 -  Pass irqchip when adding gpiochip
 -  Add GPIO <-> pin mapping ranges via callback
 -  Share struct intel_pinctrl for wider use
 -  Use GPIO direction definitions

lynxpoint:
 -  Update summary in the driver
 -  Switch to pin control API
 -  Add GPIO <-> pin mapping ranges via callback
 -  Implement ->pin_dbg_show()
 -  Add pin control operations
 -  Reuse struct intel_pinctrl in the driver
 -  Add pin control data structures
 -  Implement intel_gpio_get_direction callback
 -  Implement ->irq_ack() callback
 -  Move ownership check to IRQ chip
 -  Move lp_irq_type() closer to IRQ related routines
 -  Move ->remove closer to ->probe()
 -  Extract lp_gpio_acpi_use() for future use
 -  Convert unsigned to unsigned int
 -  Switch to memory mapped IO accessors
 -  Keep pointer to struct device instead of its container
 -  Relax GPIO request rules
 -  Assume 2 bits for mode selector
 -  Use standard pattern for memory allocation
 -  Use %pR to print IO resource
 -  Drop useless assignment
 -  Correct amount of pins
 -  Use raw_spinlock for locking
 -  Move GPIO driver to pin controller folder

sunrisepoint:
 -  Add Coffee Lake-S ACPI ID
 -  Add missing Interrupt Status register offset

tigerlake:
 -  Tiger Lake uses _HID enumeration
 2020-01-23 15:44:29 +01:00
David S. Miller
5169adbc98 wireless-drivers fixes for v5.5 
Second set of fixes for v5.5. There are quite a few patches,
 especially on iwlwifi, due to me being on a long break. Libertas also
 has a security fix and mt76 a build fix.
 
 iwlwifi
 
 * don't send the PPAG command when PPAG is disabled, since it can cause problems
 
 * a few fixes for a HW bug
 
 * a fix for RS offload;
 
 * a fix for 3168 devices where the NVM tables where the wrong tables were being read
 
 * fix a couple of potential memory leaks in TXQ code
 
 * disable L0S states in all hardware since our hardware doesn't
  officially support them anymore (and older versions of the hardware
  had instability in these states)
 
 * remove lar_disable parameter since it has been causing issues for
   some people who erroneously disable it
 
 * force the debug monitor HW to stop also when debug is disabled,
   since it sometimes stays on and prevents low system power states
 
 * don't send IWL_MVM_RXQ_NSSN_SYNC notification due to DMA problems
 
 libertas
 
 * fix two buffer overflows
 
 mt76
 
 * build fix related to CONFIG_MT76_LEDS
 
 * fix off by one in bitrates handling
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJeKX2wAAoJEG4XJFUm622bG8QH/3+QXaSJAVqzbQh2boy7aS88
 xhrrnh+bSqWY0ChMk0Z73RF8Ek0WlO+os4uN1cbWIWujrdQUPbTBtOwX4d0TzTue
 E3tBFPiHTlVtU43z1bsprA+6EE7fqt/H2lWtlxk0IHzeiQY9NcB6BlDKKCzk5Hib
 aMb5HCQy4JmSK83E60HLM9L4nEmEP+yveaKL7uaAZw+qkmyk2mT6um0TlmOYVoNG
 9V6k3OZto8LvyV6jKPZgVI6QBATnwHDxlWgooYRj54PuCj9hTbR2mcuUL2QyQeze
 AX2QNI+1kWIrAiDaU/lOj8579SiUl36iqtuKmtLhDnSe1GxDkrzmawtz3aGDm4k=
 =VZox
 -----END PGP SIGNATURE-----

Merge tag 'wireless-drivers-2020-01-23' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers

Kalle Valo says:

====================
wireless-drivers fixes for v5.5

Second set of fixes for v5.5. There are quite a few patches,
especially on iwlwifi, due to me being on a long break. Libertas also
has a security fix and mt76 a build fix.

iwlwifi

* don't send the PPAG command when PPAG is disabled, since it can cause problems

* a few fixes for a HW bug

* a fix for RS offload;

* a fix for 3168 devices where the NVM tables where the wrong tables were being read

* fix a couple of potential memory leaks in TXQ code

* disable L0S states in all hardware since our hardware doesn't
 officially support them anymore (and older versions of the hardware
 had instability in these states)

* remove lar_disable parameter since it has been causing issues for
  some people who erroneously disable it

* force the debug monitor HW to stop also when debug is disabled,
  since it sometimes stays on and prevents low system power states

* don't send IWL_MVM_RXQ_NSSN_SYNC notification due to DMA problems

libertas

* fix two buffer overflows

mt76

* build fix related to CONFIG_MT76_LEDS

* fix off by one in bitrates handling
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
 2020-01-23 14:30:20 +01:00
Mark Brown
754a36a58c
Merge branch 'spi-5.6' into spi-next 2020-01-23 12:37:18 +00:00
Mark Brown
9909f7986a
Merge branch 'regulator-5.6' into regulator-next 2020-01-23 12:37:06 +00:00
Andrew Lunn
3adb4eaa1b MAINTAINERS: Make Russell King designated reviewer of phylib 
phylink and phylib are interconnected. It makes sense for phylib and
phy driver patches to be also reviewed by the phylink maintainer.
So add Russell King as a designed reviewer of phylib.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
 2020-01-23 08:25:53 +01:00
David S. Miller
bda6a35505 net: Add Jakub to MAINTAINERS for networking general. 
Signed-off-by: David S. Miller <davem@davemloft.net>
Acked-by: Jakub Kicinski <kuba@kernel.org>
 2020-01-22 20:38:39 +01:00
Greg Kroah-Hartman
dd7d99dc68 Merge 5.5-rc7 into usb-next 
We need the USB fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 2020-01-21 19:36:59 +01:00
Eddie James
04f605906f irqchip: Add Aspeed SCU interrupt controller 
The Aspeed SOCs provide some interrupts through the System Control
Unit registers. Add an interrupt controller that provides these
interrupts to the system.

Signed-off-by: Eddie James <eajames@linux.ibm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Link: https://lore.kernel.org/r/1579123790-6894-3-git-send-email-eajames@linux.ibm.com
 2020-01-20 19:10:04 +00:00
Eddie James
5350a237b4 dt-bindings: interrupt-controller: Add Aspeed SCU interrupt controller 
Document the Aspeed SCU interrupt controller and add an include file
for the interrupts it provides.

Signed-off-by: Eddie James <eajames@linux.ibm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Andrew Jeffery <andrew@aj.id.au>
Link: https://lore.kernel.org/r/1579123790-6894-2-git-send-email-eajames@linux.ibm.com
 2020-01-20 19:10:03 +00:00
David S. Miller
b3f7e3f23a Merge ra.kernel.org:/pub/scm/linux/kernel/git/netdev/net 2020-01-19 22:10:04 +01:00
Linus Torvalds
11a8272947 Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net 
Pull networking fixes from David Miller:

 1) Fix non-blocking connect() in x25, from Martin Schiller.

 2) Fix spurious decryption errors in kTLS, from Jakub Kicinski.

 3) Netfilter use-after-free in mtype_destroy(), from Cong Wang.

 4) Limit size of TSO packets properly in lan78xx driver, from Eric
    Dumazet.

 5) r8152 probe needs an endpoint sanity check, from Johan Hovold.

 6) Prevent looping in tcp_bpf_unhash() during sockmap/tls free, from
    John Fastabend.

 7) hns3 needs short frames padded on transmit, from Yunsheng Lin.

 8) Fix netfilter ICMP header corruption, from Eyal Birger.

 9) Fix soft lockup when low on memory in hns3, from Yonglong Liu.

10) Fix NTUPLE firmware command failures in bnxt_en, from Michael Chan.

11) Fix memory leak in act_ctinfo, from Eric Dumazet.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (91 commits)
  cxgb4: reject overlapped queues in TC-MQPRIO offload
  cxgb4: fix Tx multi channel port rate limit
  net: sched: act_ctinfo: fix memory leak
  bnxt_en: Do not treat DSN (Digital Serial Number) read failure as fatal.
  bnxt_en: Fix ipv6 RFS filter matching logic.
  bnxt_en: Fix NTUPLE firmware command failures.
  net: systemport: Fixed queue mapping in internal ring map
  net: dsa: bcm_sf2: Configure IMP port for 2Gb/sec
  net: dsa: sja1105: Don't error out on disabled ports with no phy-mode
  net: phy: dp83867: Set FORCE_LINK_GOOD to default after reset
  net: hns: fix soft lockup when there is not enough memory
  net: avoid updating qdisc_xmit_lock_key in netdev_update_lockdep_key()
  net/sched: act_ife: initalize ife->metalist earlier
  netfilter: nat: fix ICMP header corruption on ICMP errors
  net: wan: lapbether.c: Use built-in RCU list checking
  netfilter: nf_tables: fix flowtable list del corruption
  netfilter: nf_tables: fix memory leak in nf_tables_parse_netdev_hooks()
  netfilter: nf_tables: remove WARN and add NLA_STRING upper limits
  netfilter: nft_tunnel: ERSPAN_VERSION must not be null
  netfilter: nft_tunnel: fix null-attribute check
  ...
 2020-01-19 12:03:53 -08:00
Linus Torvalds
575966e080 ARM: SoC fixes 
I've been sitting on these longer than I meant, so the patch count is
 a bit higher than ideal for this part of the release. There's also some
 reverts of double-applied patches that brings the diffstat up a bit.
 
 With that said, the biggest changes are:
 
  - Revert of duplicate i2c device addition on two Aspeed (BMC) Devicetrees.
  - Move of two device nodes that got applied to the wrong part of the
    tree on ASpeed G6.
  - Regulator fix for Beaglebone X15 (adding 12/5V supplies)
  - Use interrupts for keys on Amlogic SM1 to avoid missed polls
 
 In addition to that, there is a collection of smaller DT fixes:
 
  - Power supply assignment fixes for i.MX6
  - Fix of interrupt line for magnetometer on i.MX8 Librem5 devkit
  - Build fixlets (selects) for davinci/omap2+
  - More interrupt number fixes for Stratix10, Amlogic SM1, etc.
  - ... and more similar fixes across different platforms
 
 And some non-DT stuff:
 
  - optee fix to register multiple shared pages properly
  - Clock calculation fixes for MMP3
  - Clock fixes for OMAP as well
 -----BEGIN PGP SIGNATURE-----
 
 iQJDBAABCAAtFiEElf+HevZ4QCAJmMQ+jBrnPN6EHHcFAl4hIooPHG9sb2ZAbGl4
 b20ubmV0AAoJEIwa5zzehBx3vckP/jT/yrodXuK3OLtBnDQI4Em5b14uJQxEAsh+
 fTaz1H3n82PaWJVaEXpRTYMa4WZnmMPazoAoDhuqWnz/VbzfXmufFIIXsQ0rJqbf
 Ht1LWvx7hd5q49aq2x1o9Nuo5OKMbW8igQqsx7PqjSOQRaAZTkxZhOI1C9pKnnnD
 oJU8nw19N8yCQILxXMmpBX2vczWyJ3tgH6v8rhB89riBXouqwcKbTRyI0ciFdO91
 mPlfF9qwqZ99bb+7WqalrtOr+/0VgvhB3oCNzoWYPptipiaLGdH4ZXVEhyCUDmrY
 WN1kZsBtK+jtDLcMdRqg+EmbijxcxA0DSLDCow1QwuMPNHxVN5du1JN7b4uTvCPX
 sHbrDO/YdiSWx20VZID/x/sWqcQyBrDqZkA3NWhoClm75JGQUHP16pZUURCN/awy
 IGApkQ5164Ac+2DFHgh3S7qKXWk7O+hY6iksyRPPZkj31d4mCimdVaHDV/c3aeI/
 EnUI6nj6H3ghYTX2gl3yhT8d4yCM+2uSawdIFWGNvB85vs1koAUEuczc6Me8JdZV
 4HWexVs8W0Jo1w3Ndq3Hxw0RTKccC34x1f4dnzSSSEF7t4GMveTdecd/D77aiT2x
 eVNox3PIAfjR96et2vQ1C+hVRyEqn/hDapvR5OI/78F2ampee8m8tWQDYIlH/RbZ
 pdBTN5CS
 =MMJu
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC fixes from Olof Johansson:
 "I've been sitting on these longer than I meant, so the patch count is
  a bit higher than ideal for this part of the release. There's also
  some reverts of double-applied patches that brings the diffstat up a
  bit.

  With that said, the biggest changes are:

   - Revert of duplicate i2c device addition on two Aspeed (BMC)
     Devicetrees.

   - Move of two device nodes that got applied to the wrong part of the
     tree on ASpeed G6.

   - Regulator fix for Beaglebone X15 (adding 12/5V supplies)

   - Use interrupts for keys on Amlogic SM1 to avoid missed polls

  In addition to that, there is a collection of smaller DT fixes:

   - Power supply assignment fixes for i.MX6

   - Fix of interrupt line for magnetometer on i.MX8 Librem5 devkit

   - Build fixlets (selects) for davinci/omap2+

   - More interrupt number fixes for Stratix10, Amlogic SM1, etc.

   - ... and more similar fixes across different platforms

  And some non-DT stuff:

   - optee fix to register multiple shared pages properly

   - Clock calculation fixes for MMP3

   - Clock fixes for OMAP as well"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (42 commits)
  MAINTAINERS: Add myself as the co-maintainer for Actions Semi platforms
  ARM: dts: imx7: Fix Toradex Colibri iMX7S 256MB NAND flash support
  ARM: dts: imx6sll-evk: Remove incorrect power supply assignment
  ARM: dts: imx6sl-evk: Remove incorrect power supply assignment
  ARM: dts: imx6sx-sdb: Remove incorrect power supply assignment
  ARM: dts: imx6qdl-sabresd: Remove incorrect power supply assignment
  ARM: dts: imx6q-icore-mipi: Use 1.5 version of i.Core MX6DL
  ARM: omap2plus: select RESET_CONTROLLER
  ARM: davinci: select CONFIG_RESET_CONTROLLER
  ARM: dts: aspeed: rainier: Fix fan fault and presence
  ARM: dts: aspeed: rainier: Remove duplicate i2c busses
  ARM: dts: aspeed: tacoma: Remove duplicate flash nodes
  ARM: dts: aspeed: tacoma: Remove duplicate i2c busses
  ARM: dts: aspeed: tacoma: Fix fsi master node
  ARM: dts: aspeed-g6: Fix FSI master location
  ARM: dts: mmp3: Fix the TWSI ranges
  clk: mmp2: Fix the order of timer mux parents
  ARM: mmp: do not divide the clock rate
  arm64: dts: rockchip: Fix IR on Beelink A1
  optee: Fix multi page dynamic shm pool alloc
  ...
 2020-01-16 19:42:08 -08:00