Only interfaces used from outside the driver, e.g., those called by the
DesignWare core, need to accept pointers to the generic struct pcie_port.
Internal interfaces can accept pointers to the device-specific struct,
which makes them more straightforward. No functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Remove the struct ls_pcie.dbi member, which is a duplicate of the generic
pp.dbi_base member. No functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
The layerscape driver never uses the platform drvdata pointer, so don't
bother setting it. No functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Use a local "struct device *dev" for brevity and consistency with other
drivers. No functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Instead of passing ks_pcie->va_app_base to DBI mode functions,
pass the struct keystone_pcie. This will allow them to use register
accessors. No functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Instead of passing the application register base to IRQ functions,
pass the struct keystone_pcie. This will allow them to use register
accessors. No functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
The dw_pcie_readl_rc() and dw_pcie_writel_rc() interfaces already add in
pp->dbi_base, so use those instead of doing it ourselves in the keystone
driver. No functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Use a local "struct device *dev" for brevity and consistency with other
drivers. No functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
We know where the PCIe capability lives in the host bridge's config space;
in fact, we already hard-coded the offset of the Link Control 2 register.
The hard-coded Link Control 2 offset was 0xdc. Link Control 2 is at offset
0x30 into the PCIe capability, so the capability itself must be at
0xdc - 0x30 = 0xac.
Hard-code the PCIe capability offset, which means we don't have to search
for it and we can use the standard definitions for registers within the
capability.
No functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
The callers never pass a null "pcie" pointer (they check for kzalloc
failure), so we don't need to check here. The bus driver should never call
the probe function with a null ->dev pointer, so we don't need to check
that either. No functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Validate iproc_pcie->base for BCMA devices just like we already do for
platform devices in iproc_pcie_pltfm_probe(). No functional change
intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Set the drvdata pointer at the end of probe function for consistency with
other drivers. We don't need the drvdata until after the probe completes,
and we don't need it at all if the probe fails. No functional change
intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Use a local "struct device *dev" for brevity and consistency with other
drivers. No functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
The dw_pcie_readl_rc() and dw_pcie_writel_rc() interfaces already add in
pp->dbi_base, so use those instead of doing it ourselves in the imx6
driver. No functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Only interfaces used from outside the driver, e.g., those called by the
DesignWare core, need to accept pointers to the generic struct pcie_port.
Internal interfaces can accept pointers to the device-specific struct,
which makes them more straightforward. No functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Pass the struct imx6_pcie pointer, not dbi_base address, to PHY accessors.
This enables future simplifications. No functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
"np" and "node" are redundant copies of the of_node pointer. Remove "np"
and use "node" instead. Replace the "fsl,max-link-speed" use with "node"
as well. No functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Use a local "struct device *dev" for brevity and consistency with other
drivers. No functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
The dw_pcie_readl_rc() and dw_pcie_writel_rc() interfaces already add in
pp->dbi_base, so use those instead of doing it ourselves in the hisi
driver. No functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Remove the struct hisi_pcie.reg_base member, which is a duplicate of the
generic pp.dbi_base member. No functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Most struct hisi_pcie pointers are already called "hisi_pcie". Change
the rest of them to match. No functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
The hisi driver never uses the platform drvdata pointer, so don't bother
setting it. No functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Use a local "struct device *dev" for brevity and consistency with other
drivers. No functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Only interfaces used from outside the driver, e.g., those called by the
DesignWare core, need to accept pointers to the generic struct pcie_port.
Internal interfaces can accept pointers to the device-specific struct,
which makes them more straightforward. No functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Most struct exynos_pcie pointers are already called "exynos_pcie". Change
the rest of them to match. No functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
The register accessors are not performance critical and are small enough
that the compiler can inline them itself if it makes sense.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Use a local "struct device *dev" for brevity and consistency with other
drivers. No functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Do the basic pcie_port setup in the probe function for consistency with
other drivers. No functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Only interfaces used from outside the driver, e.g., those called by the
DesignWare core, need to accept pointers to the generic struct pcie_port.
Internal interfaces can accept pointers to the device-specific struct,
which makes them more straightforward. No functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
The dw_pcie_readl_rc() and dw_pcie_writel_rc() interfaces already add in
pp->dbi_base, so use those instead of doing it ourselves in the dra7xx
driver. No functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Set the drvdata pointer at the end of probe function for consistency with
other drivers. We don't need the drvdata until after the probe completes,
and we don't need it at all if the probe fails. No functional change
intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
The DesignWare core already stores the struct device pointer in struct
pcie_port. Remove the redundant copy from struct dra7xx_pcie.dev. No
functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Use a local "struct device *dev" for brevity and consistency with other
drivers. No functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Add comments about the Device Tree source of resources. No functional
change.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Only interfaces used from outside the driver, e.g., those called by the
DesignWare core, need to accept pointers to the generic struct pcie_port.
Internal interfaces can accept pointers to the device-specific struct,
which makes them more straightforward. No functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Remove artpec6_pcie_link_up(); the generic dw_pcie_link_up() does the same
thing, so we don't need a device-specific version.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
The dw_pcie_readl_rc() and dw_pcie_writel_rc() interfaces already add in
pp->dbi_base, so use those instead of doing it ourselves in the armada8k
driver. No functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
The artpec6 driver never uses the platform drvdata pointer, so don't
bother setting it. No functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Use a local "struct device *dev" for brevity and consistency with other
drivers. No functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Reorder the device-specific struct to put the DesignWare generic struct
pcie_port first. No functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Only interfaces used from outside the driver, e.g., those called by the
DesignWare core, need to accept pointers to the generic struct pcie_port.
Internal interfaces can accept pointers to the device-specific struct,
which makes them more straightforward. No functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The dw_pcie_readl_rc() and dw_pcie_writel_rc() interfaces already add in
pp->dbi_base, so use those instead of doing it ourselves in the armada8k
driver. No functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
The struct armada8k_pcie.base pointer is always a constant offset from
struct pcie_port.dbi_base. Encode that offset in the register macros so we
don't need to maintain the armada8k_pcie.base pointer. No functional
change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add a local "base" pointer, as is done for other uses, to simplify a
subsequent patch. No functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
The armada driver never uses the platform drvdata pointer, so don't bother
setting it. No functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
TLP_CFG_DW1() was only used with altera->root_bus_nr and RP_DEVFN, so
encode that directly into the macro so we don't have to clutter the uses
with the TLP_REQ_ID() usage. No functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
All TLP_CFG_DW0() uses follow the same pattern based on the root bus
number, so pull that into the macro itself to declutter the users. No
functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
devm_ioremap_resource() fails gracefully when given a NULL resource
pointer, so we don't need to check separately for failure from
platform_get_resource_byname(). Remove the redundant check.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
The altera driver never uses the platform drvdata pointer, so don't bother
setting it. No functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Use a local "struct device *dev" for brevity and consistency with other
drivers. No functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
The aardvark driver never uses the platform drvdata pointer, so don't
bother setting it. No functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Use a local "struct device *dev" for brevity and consistency with other
drivers. No functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
For consistency with other drivers, use the struct device pointer from
struct pcie_port whenever possible instead of relying on the
platform_device pointer. No functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Only interfaces used from outside the driver, e.g., those called by the
DesignWare core, need to accept pointers to the generic struct pcie_port.
Internal interfaces can accept pointers to the device-specific struct,
which makes them more straightforward. No functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
The designware-plat driver never uses the platform drvdata pointer, so
don't bother setting it. No functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Use a local "struct device *dev" for brevity and consistency with other
drivers. No functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Remove the struct dw_plat_pcie.mem_base member, which is only used as a
temporary. No functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Swap order of dw_pcie_readl_unroll() arguments to match the "dev, pos, val"
order used by pci_write_config_word() and other drivers. No functional
change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
The register accessors are not performance critical and small enough that
the compiler can inline them itself if it makes sense.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Export dw_pcie_readl_rc() and dw_pcie_writel_rc(). Many other drivers can
use these instead of implementing their own versions. No functional change
intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Swap order of dw_pcie_writel_rc() arguments to match the "dev, pos, val"
order used by pci_write_config_word() and other drivers. No functional
change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
The struct pcie_host_ops.readl_rc() and .writel_rc() function pointers
allow a driver to override the default DesignWare register accessors.
Make the signature of the override functions the same as the default
accessors. This makes the default dw_pcie_readl_rc() and the corresponding
override more structurally similar: both will compute the final register
address with "pp->dbi_base + reg". Previously dw_pcie_readl_rc() computed
the address and passed it to the override.
No functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
dw_pcie_readl_unroll() and dw_pcie_writel_unroll() duplicate what
dw_pcie_readl_rc() and dw_pcie_writel_rc() already do, so call them
directly.
[bhelgaas: reworked into patch series]
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Use a local "struct device *dev" for brevity and consistency with other
drivers. No functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Use a local "struct device *dev" for brevity and consistency with other
drivers. No functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Rename dw_pcie_valid_config() to dw_pcie_valid_device() and use the result
directly as a boolean value instead of testing against 0. No functional
change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
* pci/host-vmd:
x86/PCI: VMD: Move VMD driver to drivers/pci/host
x86/PCI: VMD: Synchronize with RCU freeing MSI IRQ descs
x86/PCI: VMD: Eliminate index member from IRQ list
x86/PCI: VMD: Eliminate vmd_vector member from list type
x86/PCI: VMD: Convert to use pci_alloc_irq_vectors() API
x86/PCI: VMD: Allocate IRQ lists with correct MSI-X count
PCI: Use positive flags in pci_alloc_irq_vectors()
PCI: Update "pci=resource_alignment" documentation
Conflicts:
drivers/pci/host/Kconfig
drivers/pci/host/Makefile
* pci/host-aardvark:
PCI: aardvark: Remove redundant dev_err call in advk_pcie_probe()
* pci/host-altera:
PCI: altera: Remove redundant platform_get_resource() return value check
PCI: altera: Move retrain from fixup to altera_pcie_host_init()
PCI: altera: Rework config accessors for use without a struct pci_bus
PCI: altera: Poll for link training status after retraining the link
* pci/host-artpec:
PCI: artpec6: Drop __init from artpec6_add_pcie_port()
* pci/host-designware:
PCI: designware: Remove redundant platform_get_resource() return value check
PCI: designware: Exchange viewport of `MEMORYs' and `CFGs/IOs'
PCI: designware: Keep viewport fixed for IO transaction if num_viewport > 2
PCI: designware: Check LTSSM training bit before deciding link is up
PCI: designware: Add iATU Unroll feature
PCI: designware: Wait for iATU enable
PCI: designware: Move link wait definitions to .c file
PCI: designware: Return data directly from dw_pcie_readl_rc()
* pci/host-hv:
PCI: hv: Handle hv_pci_generic_compl() error case
PCI: hv: Handle vmbus_sendpacket() failure in hv_compose_msi_msg()
PCI: hv: Remove the unused 'wrk' in struct hv_pcibus_device
PCI: hv: Use pci_function_description[0] in struct definitions
PCI: hv: Use zero-length array in struct pci_packet
PCI: hv: Use list_move_tail() instead of list_del() + list_add_tail()
* pci/host-keystone:
PCI: keystone: Propagate request_irq() failure
* pci/host-rcar:
PCI: rcar: Try increasing PCIe link speed to 5 GT/s at boot
PCI: rcar: Fix some checkpatch warnings
PCI: rcar: Add multi-MSI support
PCI: rcar: Don't disable/unprepare clocks on prepare/enable failure
PCI: rcar: Consolidate register space lookup and ioremap
* pci/host-rockchip:
PCI: rockchip: Fix wrong transmitted FTS count
PCI: rockchip: Improve the deassert sequence of four reset pins
PCI: rockchip: Increase the Max Credit update interval
PCI: rockchip: Add Rockchip PCIe controller support
dt-bindings: PCI: rockchip: Add DT bindings for Rockchip PCIe controller
* pci/host-tegra:
PCI: tegra: Use of_device_get_match_data()
PCI: tegra: Remove redundant _data suffix
* pci/host-xilinx:
microblaze/PCI: Add multidomain support for procfs
PCI: xilinx: Dispose of MSI virtual IRQ
PCI: xilinx: Clear correct MSI set bit
PCI: xilinx: Clear interrupt register for invalid interrupt
PCI: xilinx: Keep both legacy and MSI interrupt domain references
PCI: xilinx-nwl: Enable all MSI interrupts using MSI mask
PCI: xilinx-nwl: Expand error logging
Conflicts:
drivers/pci/host/pcie-xilinx.c
Move the driver source and Kconfig to the PCI host bridge drivers directory
and move the config option to a more appropriate sub-menu instead of
occupying the top-level location.
Update the Kconfig option with the X86_64 dependency that was implicitly
included from the previous location, and add information about the module
name when built as a loadable module.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: Jon Derrick <jonathan.derrick@intel.com>
If the expected number of FTS aren't received by RC when exiting from L0s,
the LTSSM will fall into recover state, which means it will need to send TS
for retraining which makes the latency of exiting from L0s a little longer
than expected. This issue is caused by an incorrect reset value of FTS
count on PLC1 register (offset 0x4). The expected value for Gen1/2 should
be more than 240 and we may leave a little margin here. Fix this before
starting Gen1 training which will make TS1 contain the correct FTS count.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Per TRM, we need to deassert the four reset pins simultaneously. Currently
the reset framework doesn't support that so we did it one by one. It seems
no side effect found but it does impact the state machine of controller, so
sometimes the change speed bit is not set when sending training sequence
from recover state. After the silicon RTL review from SoC guys, we don't
need to do the sequence recommended by TRM, and could just move the
deassert of mgmt_sticky_rst to the first place.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Increase the likelihood of link state to automatically go to L1 and save
some power.
The default credit update interval of 7.5 us results in the rootport
sending UpdateFC-P and UpdateFC-NP packets too often, thus resulting in the
link never going to L1, and always staying in L0/L0s. The value 24 us was
chosen after some experiments and peeking over the PCIe bus to see that we
do enter L1 substate when there is not enough traffic on the PCIe bus.
Signed-off-by: Rajat Jain <rajatja@google.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Shawn Lin <shawn.lin@rock-chips.com>
The PCIe link speed is initially set to 2.5 GT/s. Try to increase the link
speed to 5 GT/s.
Based on original patch by Grigory Kletsko
<grigory.kletsko@cogentembedded.com>.
[bhelgaas: remove "Trying speed up" message, remove unused SPCHG]
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
* pci/virtualization:
PCI: xilinx: Relax device number checking to allow SR-IOV
PCI: designware: Relax device number checking to allow SR-IOV
PCI: altera: Relax device number checking to allow SR-IOV
PCI: Check for pci_setup_device() failure in pci_iov_add_virtfn()
PCI: Mark Atheros AR9580 to avoid bus reset
artpec6_add_pcie_port() is called from artpec6_pcie_probe(), which is not
marked __init. It is wrong to call an __init function from a non-__init
one, so remove __init from artpec6_add_pcie_port().
[bhelgaas: changelog]
Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
The R-Car PCIe driver causes 13 warnings from scripts/checkpatch.pl --
let's fix at least 10 easier ones:
- line over 80 characters;
- blank line missing after declarations;
- statements not starting on a tabstop.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Implement the MSI .setup_irqs() method which enables allocation of several
MSIs at once.
[Sergei Shtylyov: removed unrelated/unneeded changes, fixed too long lines,
reordered the variable declarations, reworded the summary/description.]
Signed-off-by: Grigory Kletsko <grigory.kletsko@cogentembedded.com>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Dispose of virtual IRQ being created for MSI interrupts.
Signed-off-by: Bharat Kumar Gogada <bharatku@xilinx.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Kernel provides virtual IRQ number at teardown. Get hwirq number from
virtual IRQ and clear correct MSI set bit.
Signed-off-by: Bharat Kumar Gogada <bharatku@xilinx.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
The interrupt decode register is not being cleared if an invalid interrupt
arises. Clear the decode register in this case.
Signed-off-by: Bharat Kumar Gogada <bharatku@xilinx.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
When built with MSI support, the legacy domain reference was being
overwritten with MSI.
Create two separate domains for MSI and legacy interrupts.
Signed-off-by: Bharat Kumar Gogada <bharatku@xilinx.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
The current mask enables and allows only one MSI interrupt on each MSI
line. Enable all MSI interrupts, which will also support Endpoints with
multi-MSI support.
Signed-off-by: Bharat Kumar Gogada <bharatku@xilinx.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
If clk_prepare_enable() fails, we must not call clk_disable_unprepare() in
the error path.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
devm_ioremap_resource() fails gracefully when given a NULL resource
pointer, so we don't need to check separately for failure from
platform_get_resource_byname(). Remove the redundant check.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Previously we used a PCI early fixup to initiate a link retrain on Altera
devices. But Altera PCIe IP can be configured as either a Root Port or an
Endpoint, and they might have same vendor ID, so the fixup would be run for
both.
We only want to initiate a link retrain for Altera Root Port devices, not
for Endpoints, so move the link retrain functionality from the fixup to
altera_pcie_host_init().
[bhelgaas: changelog]
Signed-off-by: Ley Foon Tan <lftan@altera.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Previously we only allowed device 0 to be directly attached to the root
port. But SR-IOV devices may use non-zero device numbers for VFs.
Remove the restriction that only device 0 may be attached to a root port.
[bhelgaas: changelog]
Signed-off-by: Po Liu <po.liu@nxp.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Previously we only allowed device 0 to be directly attached to the root
port. But SR-IOV devices may use non-zero device numbers for VFs.
Remove the restriction that only device 0 may be attached to a root port.
[bhelgaas: changelog]
Signed-off-by: Po Liu <po.liu@nxp.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Jingoo Han <jingoohan1@gmail.com>
Previously we only allowed device 0 to be directly attached to the root
port. But SR-IOV devices may use non-zero device numbers for VFs.
Remove the restriction that only device 0 may be attached to a root port.
[bhelgaas: changelog]
Signed-off-by: Po Liu <po.liu@nxp.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Ley Foon Tan <lftan@altera.com>
On ARM/ARM64 architectures, PCI IO ports are emulated through memory mapped
IO, by reserving a chunk of virtual address space starting at PCI_IOBASE
and by mapping the PCI host bridges memory address space driving PCI IO
cycles to it.
PCI host bridge drivers that enable downstream PCI IO cycles map the host
bridge memory address responding to PCI IO cycles to the fixed virtual
address space through the pci_remap_iospace() API.
This means that if the pci_remap_iospace() function fails, the
corresponding host bridge PCI IO resource must be considered invalid, in
that there is no way for the kernel to actually drive PCI IO transactions
if the memory addresses responding to PCI IO cycles cannot be mapped into
the CPU virtual address space.
The PCI tegra host bridge driver adds the PCI IO resource retrieved from
firmware to the host bridge resource windows even if the
pci_remap_iospace() call fails; this is an actual bug in that the PCI host
bridge would consider the PCI IO resource valid (and possibly assign it to
downstream devices) even if the kernel was not able to map the PCI host
bridge memory address driving IO cycle to the CPU virtual address space (ie
pci_remap_iospace() failures).
Add the PCI host bridge driver pci_remap_iospace() failure path and do not
add the corresponding PCI host bridge PCI IO resources retrieved through
firmware when the pci_remap_iospace() function call fails, fixing the
issue.
Fixes: e6e9f471f5 ("PCI: tegra: Use generic pci_remap_iospace() rather than ARM32-specific one")
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: Thierry Reding <treding@nvidia.com>
On ARM/ARM64 architectures, PCI IO ports are emulated through memory mapped
IO, by reserving a chunk of virtual address space starting at PCI_IOBASE
and by mapping the PCI host bridges memory address space driving PCI IO
cycles to it.
PCI host bridge drivers that enable downstream PCI IO cycles map the host
bridge memory address responding to PCI IO cycles to the fixed virtual
address space through the pci_remap_iospace() API.
This means that if the pci_remap_iospace() function fails, the
corresponding host bridge PCI IO resource must be considered invalid, in
that there is no way for the kernel to actually drive PCI IO transactions
if the memory addresses responding to PCI IO cycles cannot be mapped into
the CPU virtual address space.
The PCI common host bridge driver does not remove the PCI IO resource from
the host bridge resource windows if the pci_remap_iospace() call fails;
this is an actual bug in that the PCI host bridge would consider the PCI IO
resource valid (and possibly assign it to downstream devices) even if the
kernel was not able to map the PCI host bridge memory address driving IO
cycle to the CPU virtual address space (ie pci_remap_iospace() failures).
Fix the PCI host bridge driver pci_remap_iospace() failure path, by
destroying the PCI host bridge PCI IO resources retrieved through firmware
when the pci_remap_iospace() function call fails, therefore preventing the
kernel from adding the respective PCI IO resource to the list of PCI host
bridge valid resources, fixing the issue.
Fixes: 4e64dbe226 ("PCI: generic: Expose pci_host_common_probe() for use by other drivers")
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Will Deacon <will.deacon@arm.com>
On ARM/ARM64 architectures, PCI IO ports are emulated through memory mapped
IO, by reserving a chunk of virtual address space starting at PCI_IOBASE
and by mapping the PCI host bridges memory address space driving PCI IO
cycles to it.
PCI host bridge drivers that enable downstream PCI IO cycles map the host
bridge memory address responding to PCI IO cycles to the fixed virtual
address space through the pci_remap_iospace() API.
This means that if the pci_remap_iospace() function fails, the
corresponding host bridge PCI IO resource must be considered invalid, in
that there is no way for the kernel to actually drive PCI IO transactions
if the memory addresses responding to PCI IO cycles cannot be mapped into
the CPU virtual address space.
The PCI rcar host bridge driver does not remove the PCI IO resource from
the host bridge resource windows if the pci_remap_iospace() call fails;
this is an actual bug in that the PCI host bridge would consider the PCI IO
resource valid (and possibly assign it to downstream devices) even if the
kernel was not able to map the PCI host bridge memory address driving IO
cycle to the CPU virtual address space (ie pci_remap_iospace() failures).
Fix the PCI host bridge driver pci_remap_iospace() failure path, by
destroying the PCI host bridge PCI IO resources retrieved through firmware
when the pci_remap_iospace() function call fails, therefore preventing the
kernel from adding the respective PCI IO resource to the list of PCI host
bridge valid resources, fixing the issue.
Fixes: 5d2917d469 ("PCI: rcar: Convert to DT resource parsing API")
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: Phil Edworthy <phil.edworthy@renesas.com>
CC: Simon Horman <horms+renesas@verge.net.au>
On ARM/ARM64 architectures, PCI IO ports are emulated through memory mapped
IO, by reserving a chunk of virtual address space starting at PCI_IOBASE
and by mapping the PCI host bridges memory address space driving PCI IO
cycles to it.
PCI host bridge drivers that enable downstream PCI IO cycles map the host
bridge memory address responding to PCI IO cycles to the fixed virtual
address space through the pci_remap_iospace() API.
This means that if the pci_remap_iospace() function fails, the
corresponding host bridge PCI IO resource must be considered invalid, in
that there is no way for the kernel to actually drive PCI IO transactions
if the memory addresses responding to PCI IO cycles cannot be mapped into
the CPU virtual address space.
The PCI versatile host bridge driver does not remove the PCI IO resource
from the host bridge resource windows if the pci_remap_iospace() call
fails; this is an actual bug in that the PCI host bridge would consider the
PCI IO resource valid (and possibly assign it to downstream devices) even
if the kernel was not able to map the PCI host bridge memory address
driving IO cycle to the CPU virtual address space (ie pci_remap_iospace()
failures).
Fix the PCI host bridge driver pci_remap_iospace() failure path, by
destroying the PCI host bridge PCI IO resources retrieved through firmware
when the pci_remap_iospace() function call fails, therefore preventing the
kernel from adding the respective PCI IO resource to the list of PCI host
bridge valid resources, fixing the issue.
Fixes: b7e78170ef ("PCI: versatile: Add DT-based ARM Versatile PB PCIe host driver")
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: Rob Herring <robh@kernel.org>
On ARM/ARM64 architectures, PCI IO ports are emulated through memory mapped
IO, by reserving a chunk of virtual address space starting at PCI_IOBASE
and by mapping the PCI host bridges memory address space driving PCI IO
cycles to it.
PCI host bridge drivers that enable downstream PCI IO cycles map the host
bridge memory address responding to PCI IO cycles to the fixed virtual
address space through the pci_remap_iospace() API.
This means that if the pci_remap_iospace() function fails, the
corresponding host bridge PCI IO resource must be considered invalid, in
that there is no way for the kernel to actually drive PCI IO transactions
if the memory addresses responding to PCI IO cycles cannot be mapped into
the CPU virtual address space.
The PCI designware host bridge driver does not remove the PCI IO resource
from the host bridge resource windows if the pci_remap_iospace() call
fails; this is an actual bug in that the PCI host bridge would consider the
PCI IO resource valid (and possibly assign it to downstream devices) even
if the kernel was not able to map the PCI host bridge memory address
driving IO cycle to the CPU virtual address space (ie pci_remap_iospace()
failures).
Fix the PCI host bridge driver pci_remap_iospace() failure path, by
destroying the PCI host bridge PCI IO resources retrieved through firmware
when the pci_remap_iospace() function call fails, therefore preventing the
kernel from adding the respective PCI IO resource to the list of PCI host
bridge valid resources, fixing the issue.
Fixes: cbce790059 ("PCI: designware: Make driver arch-agnostic")
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: Jingoo Han <jingoohan1@gmail.com>
CC: Pratyush Anand <pratyush.anand@gmail.com>
On ARM/ARM64 architectures, PCI IO ports are emulated through memory mapped
IO, by reserving a chunk of virtual address space starting at PCI_IOBASE
and by mapping the PCI host bridge's memory address space driving PCI IO
cycles to it.
PCI host bridge drivers that enable downstream PCI IO cycles map the host
bridge memory address responding to PCI IO cycles to the fixed virtual
address space through the pci_remap_iospace() API.
This means that if the pci_remap_iospace() function fails, the
corresponding host bridge PCI IO resource must be considered invalid, in
that there is no way for the kernel to actually drive PCI IO transactions
if the memory addresses responding to PCI IO cycles cannot be mapped into
the CPU virtual address space.
The PCI aardvark host bridge driver does not remove the PCI IO resource
from the host bridge resource windows if the pci_remap_iospace() call
fails; this is an actual bug in that the PCI host bridge would consider the
PCI IO resource valid (and possibly assign it to downstream devices) even
if the kernel was not able to map the PCI host bridge memory address
driving IO cycle to the CPU virtual address space (ie pci_remap_iospace()
failures).
Fix the PCI host bridge driver pci_remap_iospace() failure path, by
destroying the PCI host bridge PCI IO resources retrieved through firmware
when the pci_remap_iospace() function call fails, therefore preventing the
kernel from adding the respective PCI IO resource to the list of PCI host
bridge valid resources, fixing the issue.
Fixes: 8c39d71036 ("PCI: aardvark: Add Aardvark PCI host controller driver")
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
'completion_status' is used in some places, e.g.,
hv_pci_protocol_negotiation(), so we should make sure it's initialized in
error case too, though the error is unlikely here.
[bhelgaas: fix changelog typo and nearby whitespace]
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: KY Srinivasan <kys@microsoft.com>
CC: Jake Oshins <jakeo@microsoft.com>
CC: Haiyang Zhang <haiyangz@microsoft.com>
CC: Vitaly Kuznetsov <vkuznets@redhat.com>
Handle vmbus_sendpacket() failure in hv_compose_msi_msg().
I happened to find this when reading the code. I didn't get a real issue
however.
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: KY Srinivasan <kys@microsoft.com>
CC: Jake Oshins <jakeo@microsoft.com>
CC: Haiyang Zhang <haiyangz@microsoft.com>
CC: Vitaly Kuznetsov <vkuznets@redhat.com>
The 2 structs can use a zero-length array here, because dynamic memory of
the correct size is allocated in hv_pci_devices_present() and we don't need
this extra element.
No functional change.
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: KY Srinivasan <kys@microsoft.com>
CC: Jake Oshins <jakeo@microsoft.com>
CC: Haiyang Zhang <haiyangz@microsoft.com>
CC: Vitaly Kuznetsov <vkuznets@redhat.com>
Use zero-length array in struct pci_packet and rename struct pci_message's
field "message_type" to "type". This makes the code more readable.
No functionality change.
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: KY Srinivasan <kys@microsoft.com>
CC: Jake Oshins <jakeo@microsoft.com>
CC: Haiyang Zhang <haiyangz@microsoft.com>
CC: Vitaly Kuznetsov <vkuznets@redhat.com>
Add support for the Rockchip PCIe controller found on RK3399 SoC platform.
[bhelgaas: fold in Brian's rockchip_pcie_client_irq_handler() OR fix, other
fixes and cleanups from Guenter Roeck <linux@roeck-us.net> and me,
uninitialized variable fix from Arnd Bergmann <arnd@arndb.de>]
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Rework configs accessors so a future patch can use them in _probe() with
struct altera_pcie instead of struct pci_bus.
Signed-off-by: Ley Foon Tan <lftan@altera.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
This code is not being built as a module by anyone:
drivers/pci/host/Kconfig:config PCIE_XILINX_NWL
drivers/pci/host/Kconfig: bool "NWL PCIe Core"
Remove uses of MODULE_DESCRIPTION(), MODULE_AUTHOR(), MODULE_LICENSE(),
etc., so that when reading the driver there is no doubt it is builtin-only.
The information is preserved in comments at the top of the file.
Explicitly disallow driver unbind, since that doesn't have a sensible use
case anyway, and it allows us to drop the ".remove" code for non-modular
drivers. Delete several functions only used by the remove function.
Note that for non-modular code, builtin_platform_driver() uses the same
init level priority as module_platform_driver(), so this doesn't change
init ordering.
[bhelgaas: changelog]
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: Michal Simek <michal.simek@xilinx.com>
CC: "Sören Brinkmann" <soren.brinkmann@xilinx.com>
CC: Marc Zyngier <marc.zyngier@arm.com>
CC: Bharat Kumar Gogada <bharat.kumar.gogada@xilinx.com>
This code is not being built as a module by anyone:
drivers/pci/host/Kconfig:config PCIE_XILINX
drivers/pci/host/Kconfig: bool "Xilinx AXI PCIe host bridge support"
Remove uses of MODULE_DESCRIPTION(), MODULE_AUTHOR(), MODULE_LICENSE(),
etc., so that when reading the driver there is no doubt it is builtin-only.
The information is preserved in comments at the top of the file.
Note that for non-modular code, builtin_platform_driver() uses the same
init level priority as module_platform_driver(), so this doesn't change
init ordering.
[bhelgaas: changelog]
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: Michal Simek <michal.simek@xilinx.com>
CC: "Sören Brinkmann" <soren.brinkmann@xilinx.com>
This code is not being built as a module by anyone:
drivers/pci/host/Kconfig:config PCIE_QCOM
drivers/pci/host/Kconfig: bool "Qualcomm PCIe controller"
Remove uses of MODULE_DESCRIPTION(), MODULE_AUTHOR(), MODULE_LICENSE(),
etc., so that when reading the driver there is no doubt it is builtin-only.
The information is preserved in comments at the top of the file.
Note that for non-modular code, MODULE_DEVICE_TABLE is a no-op and
builtin_platform_driver() uses the same init level priority as
module_platform_driver(), so this doesn't change init ordering.
Explicitly disallow driver unbind, since that doesn't have a sensible use
case anyway, and it allows us to drop the ".remove" code for non-modular
drivers.
[bhelgaas: changelog]
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: Stanimir Varbanov <svarbanov@mm-sol.com>
This code is not being built as a module by anyone:
drivers/pci/host/Kconfig:config PCI_DRA7XX
drivers/pci/host/Kconfig: bool "TI DRA7xx PCIe controller"
Remove uses of MODULE_DESCRIPTION(), MODULE_AUTHOR(), MODULE_LICENSE(),
etc., so that when reading the driver there is no doubt it is builtin-only.
The information is preserved in comments at the top of the file.
Note that for non-modular code, MODULE_DEVICE_TABLE is a no-op and
builtin_platform_driver_probe() uses the same init level priority as
module_platform_driver_probe(), so this doesn't change init ordering.
Explicitly disallow driver unbind, since that doesn't have a sensible use
case anyway, and it allows us to drop the ".remove" code for non-modular
drivers.
[bhelgaas: changelog]
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: Kishon Vijay Abraham I <kishon@ti.com>
This code is not being built as a module by anyone:
drivers/pci/host/Kconfig:config PCI_HOST_COMMON
drivers/pci/host/Kconfig: bool
Remove uses of MODULE_DESCRIPTION(), MODULE_AUTHOR(), MODULE_LICENSE(),
etc., so that when reading the driver there is no doubt it is builtin-only.
The information is preserved in comments at the top of the file.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: Will Deacon <will.deacon@arm.com>
devm_ioremap_resource() fails gracefully when given a NULL resource
pointer, so we don't need to check separately for failure from
platform_get_resource_byname(). Remove the redundant check.
[bhelgaas: changelog]
Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
When we have only two view ports in a DesignWare PCIe platform, iatu0
is used for both CFG and IO accesses. When CFGs are sent to peripherals
(e.g., lspci), iatu0 frequently switches between CFG and IO.
For such scenarios, a MEMORY might be sent as an IOs by mistake.
Considering the following configurations:
MEMORY -> BASE_ADDR: 0xb4100000, LIMIT: 0xb4100FFF, TYPE=mem
CFG -> BASE_ADDR: 0xb4000000, LIMIT: 0xb4000FFF, TYPE=cfg
IO -> BASE_ADDR: 0xFFFFFFFF, LIMIT: 0xFFFFFFFE, TYPE=io
Suppose PCIe has just completed a CFG access. To switch back to IO, it
sets the BASE_ADDR to 0xFFFFFFFF, LIMIT 0xFFFFFFFE and TYPE to IO. When
another CFG comes, the BASE_ADDR is set to 0xb4000000 to switch to CFG. At
this moment, a MEMORY access shows up, since it matches with iatu0 (due to
0xb4000000 <= MEMORY BASE_ADDR <= MEMORY LIMIT <= 0xFFFFFFF), it is treated
as an IO access by mistake, then sent to perpheral.
This patch fixes the problem by exchanging the assignments of `MEMORYs' and
`CFGs/IOs', which assigning MEMORYs to iatu0, CFGs and IOs to iatu1.
We can still have issues with IO transfer, however memory transfer is used
predominantly therefore we are just minimizing the risk of failure.
Actually, we can not do much when we have only two viewports. We can
either not allow the less frequent IO transfers at all, or can live with a
remote possibility of getting it corrupted.
Signed-off-by: Dong Bo <dongbo4@huawei.com>
[pratyush.anand@gmail.com: Modified commit log to capture remote risk]
Signed-off-by: Pratyush Anand <pratyush.anand@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
This code is not being built as a module by anyone:
drivers/pci/host/Kconfig:config PCI_EXYNOS
drivers/pci/host/Kconfig: bool "Samsung Exynos PCIe controller"
Remove uses of MODULE_DESCRIPTION(), MODULE_AUTHOR(), MODULE_LICENSE(),
etc., so that when reading the driver there is no doubt it is builtin-only.
The information is preserved in comments at the top of the file.
Note that for non-modular code, MODULE_DEVICE_TABLE is a no-op.
[bhelgaas: changelog]
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
CC: Jingoo Han <jingoohan1@gmail.com>
CC: Kukjin Kim <kgene@kernel.org>
This code is not being built as a module by anyone:
drivers/pci/host/Kconfig:config PCIE_DW
drivers/pci/host/Kconfig: bool
Remove uses of MODULE_DESCRIPTION(), MODULE_AUTHOR(), MODULE_LICENSE(),
etc., so that when reading the driver there is no doubt it is builtin-only.
The information is preserved in comments at the top of the file.
[bhelgaas: changelog]
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: Jingoo Han <jingoohan1@gmail.com>
CC: Pratyush Anand <pratyush.anand@gmail.com>
This code is not being built as a module by anyone:
drivers/pci/host/Kconfig:config PCIE_SPEAR13XX
drivers/pci/host/Kconfig: bool "STMicroelectronics SPEAr PCIe controller"
Remove uses of MODULE_DESCRIPTION(), MODULE_AUTHOR(), MODULE_LICENSE(),
etc., so that when reading the driver there is no doubt it is builtin-only.
The information is preserved in comments at the top of the file.
Note that for non-modular code, MODULE_DEVICE_TABLE is a no-op and
module_init() translates to device_initcall().
[bhelgaas: changelog]
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: Pratyush Anand <pratyush.anand@gmail.com>
This code is not being built as a module by anyone:
drivers/pci/host/Kconfig:config PCI_IMX6
drivers/pci/host/Kconfig: bool "Freescale i.MX6 PCIe controller"
Remove uses of MODULE_DESCRIPTION(), MODULE_AUTHOR(), MODULE_LICENSE(),
etc., so that when reading the driver there is no doubt it is builtin-only.
The information is preserved in comments at the top of the file.
Note that for non-modular code, MODULE_DEVICE_TABLE is a no-op and
module_init() translates to device_initcall().
[bhelgaas: changelog]
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: Richard Zhu <Richard.Zhu@freescale.com>
CC: Lucas Stach <l.stach@pengutronix.de>
This code is not being built as a module by anyone:
drivers/pci/host/Kconfig:config PCIE_ALTERA
drivers/pci/host/Kconfig: bool "Altera PCIe controller"
Remove uses of MODULE_DESCRIPTION(), MODULE_AUTHOR(), MODULE_LICENSE(),
etc., so that when reading the driver there is no doubt it is builtin-only.
The information is preserved in comments at the top of the file.
Note that for non-modular code, MODULE_DEVICE_TABLE is a no-op and
module_init() translates to device_initcall().
[bhelgaas: changelog]
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: Ley Foon Tan <lftan@altera.com>
This code is not being built as a module by anyone:
drivers/pci/host/Kconfig:config PCIE_ALTERA_MSI
drivers/pci/host/Kconfig: bool "Altera PCIe MSI feature"
Remove uses of MODULE_DESCRIPTION(), MODULE_AUTHOR(), MODULE_LICENSE(),
etc., so that when reading the driver there is no doubt it is builtin-only.
The information is preserved in comments at the top of the file.
[bhelgaas: changelog]
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: Ley Foon Tan <lftan@altera.com>
devm_ioremap_resource() emits an error message already, so remove the
dev_err() call in advk_pcie_probe() to avoid redundant error messages.
Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Move the devm_ioremap_resource() of R-Car register space next to the
of_address_to_resource() that extracts the resource. No functional change
intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Most of the platforms have 3 or more viewports. For such platforms, We do
not need to share viewports between IO and CFG. Assign viewport 2 to IO
transactions in such cases.
Tested-by: Dong Bo <dongbo4@huawei.com>
Signed-off-by: Pratyush Anand <pratyush.anand@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Rob Herring <robh@kernel.org>
of_device_get_match_data() was added in v4.2 to reduce the the boilerplate
required to get at SoC-specific data. Use it to simplify the code
slightly.
[bhelgaas: changelog]
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
The struct tegra_pcie_soc_data represents SoC-specific data. The shorter
name tegra_pcie_soc already describes that accurately enough, so the extra
five characters are redundant. Also remove the suffix from various
variable names to shorten the code a little.
This also makes this driver more consistent with the naming used in other
drivers that use a similar mechanism to differentiate between various SoC
generations.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Poll for link training status is cleared before poll for link up status.
This can help to get the reliable link up status, especially when PCIe is
in Gen 3 speed.
Signed-off-by: Ley Foon Tan <lftan@altera.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
The link may be up but still in link training. In this case, we can't
think the link is up and operating correctly. Teach dw_pcie_link_up() to
be aware of the PCIE_PHY_DEBUG_R1_LINK_IN_TRAINING bit.
Also rewrite PCIE_PHY_DEBUG_R1_LINK_UP definition so that it's consistent
with other macros.
Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Joao Pinto <jpinto@synopsys.com>
Add support for the new iATU Unroll mechanism that will be used from Core
version 4.80. The new Cores can support either iATU Unroll or the "old"
iATU method, now called Legacy Mode. The driver is perfectly capable of
performing well for both.
[bhelgaas: split ATU enable timeout to separate patch]
Signed-off-by: Joao Pinto <jpinto@synopsys.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Add a loop with timeout to make sure the iATU is really enabled before
subsequent config and I/O accesses.
[bhelgaas: split to separate patch, use dev_err() instead of dev_dbg()]
Signed-off-by: Joao Pinto <jpinto@synopsys.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Move the link wait sleep definitions to the .c file as suggested by
Jisheng Zhang in a previous patch.
Signed-off-by: Joao Pinto <jpinto@synopsys.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: Jisheng Zhang <jszhang@marvell.com>
dw_pcie_readl_rc() reads a u32 value. Previously we stored that value in
space supplied by the caller. Return the u32 value directly instead.
This makes the calling code read better and makes it obvious that the
caller need not initialize the storage. In the following example it isn't
clear whether "val" is initialized before being used:
dw_pcie_readl_rc(pp, PCI_COMMAND, &val);
if (val & PCI_COMMAND_MEMORY)
...
No functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
* pci/host-aardvark:
arm64: dts: marvell: Add Aardvark PCIe support for Armada 3700
PCI: aardvark: Add Aardvark PCI host controller driver
dt-bindings: add DT binding for the Aardvark PCIe controller
* pci/host-altera:
PCI: altera: Poll for link up status after retraining the link
PCI: altera: Check link status before retrain link
PCI: altera: Reorder read/write functions
* pci/host-dra7xx:
PCI: dra7xx: Fix return value in case of error
* pci/host-hv:
PCI: hv: Fix interrupt cleanup path
PCI: hv: Handle all pending messages in hv_pci_onchannelcallback()
PCI: hv: Don't leak buffer in hv_pci_onchannelcallback()
* pci/host-vmd:
x86/PCI: VMD: Separate MSI and MSI-X vector sharing
x86/PCI: VMD: Use x86_vector_domain as parent domain
x86/PCI: VMD: Use lock save/restore in interrupt enable path
x86/PCI: VMD: Initialize list item in IRQ disable
x86/PCI: VMD: Select device dma ops to override
* pci/host-xilinx:
PCI: xilinx: Fix return value in case of error
Manually apply changes from pci/demodularize-hosts and
pci/host-request-windows to drivers/pci/host/pci-aardvark.c
* pci/host-tegra:
PCI: tegra: Program PADS_REFCLK_CFG* registers with per-SoC values
PCI: tegra: Program PADS_REFCLK_CFG* always, not just on legacy SoCs
PCI: tegra: Stop setting pcibios_min_mem
PCI: tegra: Use generic pci_remap_iospace() rather than ARM32-specific one
PCI: tegra: Use lower-case hex consistently for register definitions
Conflicts:
drivers/pci/host/pci-tegra.c
Drop stray pci_ioremap_io() per Thierry Reding <treding@nvidia.com>;
removal tested by Jon Hunter <jonathanh@nvidia.com>.
* pci/resource:
unicore32/PCI: Remove pci=firmware command line parameter handling
ARM/PCI: Remove arch-specific pcibios_enable_device()
ARM64/PCI: Remove arch-specific pcibios_enable_device()
MIPS/PCI: Claim bus resources on PCI_PROBE_ONLY set-ups
ARM/PCI: Claim bus resources on PCI_PROBE_ONLY set-ups
PCI: generic: Claim bus resources on PCI_PROBE_ONLY set-ups
PCI: Add generic pci_bus_claim_resources()
alx: Use pci_(request|release)_mem_regions
ethernet/intel: Use pci_(request|release)_mem_regions
GenWQE: Use pci_(request|release)_mem_regions
lpfc: Use pci_(request|release)_mem_regions
NVMe: Use pci_(request|release)_mem_regions
PCI: Add helpers to request/release memory and I/O regions
PCI: Extending pci=resource_alignment to specify device/vendor IDs
sparc/PCI: Implement pci_resource_to_user() with pcibios_resource_to_bus()
powerpc/pci: Implement pci_resource_to_user() with pcibios_resource_to_bus()
microblaze/PCI: Implement pci_resource_to_user() with pcibios_resource_to_bus()
PCI: Unify pci_resource_to_user() declarations
microblaze/PCI: Remove useless __pci_mmap_set_pgprot()
powerpc/pci: Remove __pci_mmap_set_pgprot()
PCI: Ignore write combining when mapping I/O port space
* pci/aspm:
PCI/ASPM: Remove redundant check of pcie_set_clkpm
* pci/dpc:
PCI: Remove DPC tristate module option
PCI: Bind DPC to Root Ports as well as Downstream Ports
PCI: Fix whitespace in struct dpc_dev
PCI: Convert Downstream Port Containment driver to use devm_* functions
* pci/hotplug:
PCI: Allow additional bus numbers for hotplug bridges
* pci/misc:
PCI: Include <asm/dma.h> for isa_dma_bridge_buggy
PCI: Make bus_attr_resource_alignment static
MAINTAINERS: Add file patterns for PCI device tree bindings
PCI: Fix comment typo
* pci/msi:
PCI/MSI: irqchip: Fix PCI_MSI dependencies
* pci/pm:
PCI: pciehp: Ignore interrupts during D3cold
PCI: Document connection between pci_power_t and hardware PM capability
PCI: Add runtime PM support for PCIe ports
ACPI / hotplug / PCI: Runtime resume bridge before rescan
PCI: Power on bridges before scanning new devices
PCI: Put PCIe ports into D3 during suspend
PCI: Don't clear d3cold_allowed for PCIe ports
PCI / PM: Enforce type casting for pci_power_t
* pci/virtualization:
PCI: Add ACS quirk for Solarflare SFC9220
PCI: Add DMA alias quirk for Adaptec 3805
PCI: Mark Atheros AR9485 and QCA9882 to avoid bus reset
PCI: Add function 1 DMA alias quirk for Marvell 88SE9182
This code is not being built as a module by anyone:
drivers/pci/host/Kconfig:config PCI_XGENE
drivers/pci/host/Kconfig: bool "X-Gene PCIe controller"
Remove uses of MODULE_DESCRIPTION(), MODULE_AUTHOR(), MODULE_LICENSE(),
etc., so that when reading the driver there is no doubt it is builtin-only.
The information is preserved in comments at the top of the file.
Replace module_platform_driver() with builtin_platform_driver(), which uses
the same init level priority, so init ordering is unchanged.
[bhelgaas: changelog]
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: Tanmay Inamdar <tinamdar@apm.com>
This code is not being built as a module by anyone:
drivers/pci/host/Kconfig:config PCI_HOST_THUNDER_PEM
drivers/pci/host/Kconfig: bool "Cavium Thunder PCIe controller to off-chip devices"
Remove uses of MODULE_DESCRIPTION(), MODULE_AUTHOR(), MODULE_LICENSE(),
etc., so that when reading the driver there is no doubt it is builtin-only.
The information is preserved in comments at the top of the file.
Replace module_platform_driver() with builtin_platform_driver(), which uses
the same init level priority, so init ordering is unchanged.
Note that MODULE_DEVICE_TABLE is a no-op for non-modular code.
[bhelgaas: changelog]
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: David Daney <david.daney@cavium.com>
This code is not being built as a module by anyone:
drivers/pci/host/Kconfig:config PCI_HOST_THUNDER_ECAM
drivers/pci/host/Kconfig: bool "Cavium Thunder ECAM controller to on-chip devices on pass-1.x silicon"
Remove uses of MODULE_DESCRIPTION(), MODULE_AUTHOR(), MODULE_LICENSE(),
etc., so that when reading the driver there is no doubt it is builtin-only.
The information is preserved in comments at the top of the file.
Replace module_platform_driver() with builtin_platform_driver(), which uses
the same init level priority, so init ordering is unchanged.
Note that MODULE_DEVICE_TABLE is a no-op for non-modular code.
[bhelgaas: changelog]
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: David Daney <david.daney@cavium.com>
This code is not being built as a module by anyone:
drivers/pci/host/Kconfig:config PCI_TEGRA
drivers/pci/host/Kconfig: bool "NVIDIA Tegra PCIe controller"
Remove uses of MODULE_DESCRIPTION(), MODULE_AUTHOR(), MODULE_LICENSE(),
etc., so that when reading the driver there is no doubt it is builtin-only.
The information is preserved in comments at the top of the file.
Replace module_platform_driver() with builtin_platform_driver(), which uses
the same init level priority, so init ordering is unchanged.
Note that MODULE_DEVICE_TABLE is a no-op for non-modular code.
[bhelgaas: changelog]
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: Thierry Reding <thierry.reding@gmail.com>
CC: Stephen Warren <swarren@wwwdotorg.org>
CC: Alexandre Courbot <gnurou@gmail.com>
CC: linux-tegra@vger.kernel.org
This code is not being built as a module by anyone:
drivers/pci/host/Kconfig:config PCI_RCAR_GEN2
drivers/pci/host/Kconfig: bool "Renesas R-Car Gen2 Internal PCI controller"
Remove uses of MODULE_DESCRIPTION(), MODULE_AUTHOR(), MODULE_LICENSE(),
etc., so that when reading the driver there is no doubt it is builtin-only.
The information is preserved in comments at the top of the file.
Replace module_platform_driver() with builtin_platform_driver(), which uses
the same init level priority, so init ordering is unchanged.
Note that MODULE_DEVICE_TABLE is a no-op for non-modular code.
[bhelgaas: changelog, remove "Module" from author comment]
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Phil Edworthy <phil.edworthy@renesas.com>
CC: Valentine Barshak <valentine.barshak@cogentembedded.com>
This code is not being built as a module by anyone:
drivers/pci/host/Kconfig:config PCI_RCAR_GEN2_PCIE
drivers/pci/host/Kconfig: bool "Renesas R-Car PCIe controller"
Remove uses of MODULE_DESCRIPTION(), MODULE_AUTHOR(), MODULE_LICENSE(),
etc., so that when reading the driver there is no doubt it is builtin-only.
The information is preserved in comments at the top of the file.
Replace module_platform_driver() with builtin_platform_driver(), which uses
the same init level priority, so init ordering is unchanged.
Note that MODULE_DEVICE_TABLE is a no-op for non-modular code.
[bhelgaas: changelog, remove "Module" from author comment]
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Phil Edworthy <phil.edworthy@renesas.com>
This code is not being built as a module by anyone:
drivers/pci/host/Kconfig:config PCI_MVEBU
drivers/pci/host/Kconfig: bool "Marvell EBU PCIe controller"
Remove uses of MODULE_DESCRIPTION(), MODULE_AUTHOR(), MODULE_LICENSE(),
etc., so that when reading the driver there is no doubt it is builtin-only.
The information is preserved in comments at the top of the file.
Replace module_platform_driver() with builtin_platform_driver(), which uses
the same init level priority, so init ordering is unchanged.
Note that MODULE_DEVICE_TABLE is a no-op for non-modular code.
[bhelgaas: changelog, remove "Module" from author comment]
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
CC: Jason Cooper <jason@lakedaemon.net>
This code is not being built as a module by anyone:
drivers/pci/host/Kconfig:config PCI_LAYERSCAPE
drivers/pci/host/Kconfig: bool "Freescale Layerscape PCIe controller"
Remove uses of MODULE_DESCRIPTION(), MODULE_AUTHOR(), MODULE_LICENSE(),
etc., so that when reading the driver there is no doubt it is builtin-only.
The information is preserved in comments at the top of the file.
Replace module_platform_driver() with builtin_platform_driver(), which uses
the same init level priority, so init ordering is unchanged.
Note that MODULE_DEVICE_TABLE is a no-op for non-modular code.
[bhelgaas: changelog]
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: Minghuan Lian <minghuan.Lian@freescale.com>
CC: Mingkai Hu <mingkai.hu@freescale.com>
CC: Roy Zang <tie-fei.zang@freescale.com>
This code is not being built as a module by anyone:
drivers/pci/host/Kconfig:config PCI_KEYSTONE
drivers/pci/host/Kconfig: bool "TI Keystone PCIe controller"
Remove uses of MODULE_DESCRIPTION(), MODULE_AUTHOR(), MODULE_LICENSE(),
etc., so that when reading the driver there is no doubt it is builtin-only.
The information is preserved in comments at the top of the file.
Replace module_platform_driver() with builtin_platform_driver(), which uses
the same init level priority, so init ordering is unchanged.
Note that MODULE_DEVICE_TABLE is a no-op for non-modular code.
[bhelgaas: changelog]
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-By: Murali Karicheri <m-karicheri2@ti.com>
This code is not being built as a module by anyone:
host/Kconfig:config PCI_HISI
host/Kconfig: bool "HiSilicon Hip05 and Hip06 SoCs PCIe controllers"
Remove uses of MODULE_DESCRIPTION(), MODULE_AUTHOR(), MODULE_LICENSE(),
etc., so that when reading the driver there is no doubt it is builtin-only.
The information is preserved in comments at the top of the file.
Replace module_platform_driver() with builtin_platform_driver(), which uses
the same init level priority, so init ordering is unchanged.
Note that MODULE_DEVICE_TABLE is a no-op for non-modular code.
[bhelgaas: changelog]
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: Zhou Wang <wangzhou1@hisilicon.com>
CC: Dacai Zhu <zhudacai@hisilicon.com>
CC: Gabriele Paoloni <gabriele.paoloni@huawei.com>
This code is not being built as a module by anyone:
drivers/pci/host/Kconfig:config PCI_HOST_GENERIC
drivers/pci/host/Kconfig: bool "Generic PCI host controller"
Remove uses of MODULE_DESCRIPTION(), MODULE_AUTHOR(), MODULE_LICENSE(),
etc., so that when reading the driver there is no doubt it is builtin-only.
The information is preserved in comments at the top of the file.
Replace module_platform_driver() with builtin_platform_driver(), which uses
the same init level priority, so init ordering is unchanged.
Note that MODULE_DEVICE_TABLE is a no-op for non-modular code.
[bhelgaas: changelog]
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Will Deacon <will.deacon@arm.com>
This code is not being built as a module by anyone:
drivers/pci/host/Kconfig:config PCIE_DW_PLAT
drivers/pci/host/Kconfig: bool "Platform bus based DesignWare PCIe Controller"
Remove uses of MODULE_DESCRIPTION(), MODULE_AUTHOR(), MODULE_LICENSE(),
etc., so that when reading the driver there is no doubt it is builtin-only.
The information is preserved in comments at the top of the file.
Replace module_platform_driver() with builtin_platform_driver(), which uses
the same init level priority, so init ordering is unchanged.
Note that MODULE_DEVICE_TABLE is a no-op for non-modular code.
[bhelgaas: changelog]
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Joao Pinto <jpinto@synopsys.com>
CC: Jingoo Han <jingoohan1@gmail.com>
CC: Pratyush Anand <pratyush.anand@gmail.com>
This code is not being built as a module by anyone:
drivers/pci/host/Kconfig:config PCIE_ARTPEC6
drivers/pci/host/Kconfig: bool "Axis ARTPEC-6 PCIe controller"
Remove uses of MODULE_DESCRIPTION(), MODULE_AUTHOR(), MODULE_LICENSE(),
etc., so that when reading the driver there is no doubt it is builtin-only.
The information is preserved in comments at the top of the file.
Replace module_platform_driver() with builtin_platform_driver(), which uses
the same init level priority, so init ordering is unchanged.
Note that MODULE_DEVICE_TABLE is a no-op for non-modular code.
[bhelgaas: changelog, add "Author" comment]
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: Niklas Cassel <niklas.cassel@axis.com>
CC: Jesper Nilsson <jesper.nilsson@axis.com>
This code is not being built as a module by anyone:
drivers/pci/host/Kconfig:config PCIE_ARMADA_8K
drivers/pci/host/Kconfig: bool "Marvell Armada-8K PCIe controller"
Remove uses of MODULE_DESCRIPTION(), MODULE_AUTHOR(), MODULE_LICENSE(),
etc., so that when reading the driver there is no doubt it is builtin-only.
The information is preserved in comments at the top of the file.
Replace module_platform_driver() with builtin_platform_driver(), which uses
the same init level priority, so init ordering is unchanged.
Note that MODULE_DEVICE_TABLE is a no-op for non-modular code.
[bhelgaas: changelog]
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The DesignWare PCIe driver requires MSI support, so we get a warning for
the artpec6 glue driver if that is not enabled:
warning: (PCIE_ARTPEC6) selects PCIE_DW which has unmet direct dependencies (PCI && PCI_MSI_IRQ_DOMAIN)
Add the same dependency that all other such drivers have.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Niklas Cassel <niklas.cassel@axis.com>
Add a driver for the Aardvark PCIe controller used on the Marvell Armada
3700 ARM64 SoC.
Based on work done by Hezi Shahmoon <hezi.shahmoon@marvell.com> and Marcin
Wojtas <mw@semihalf.com>.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
The value that should be programmed into the PADS_REFCLK register varies
per SoC. Fix the Tegra PCIe driver to program the correct values. Future
SoCs will require different values in cfg0/1, so the two values are stored
separately in the per-SoC data structures.
For reference, the values are all documented in NV bug 1771116 comment 20.
The ASIC team has validated all these values, except for the Tegra20 value
which is simply left unchanged in this patch.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Thierry Reding <treding@nvidia.com>
tegra_pcie_phy_power_on() calls tegra_pcie_phy_enable() only for legacy
SoCs. However, part of tegra_pcie_phy_enable() needs to happen in all
cases. Move that code up one level into tegra_pcie_phy_power_on().
[bhelgaas: changelog]
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
pcibios_min_mem only exists on 32-bit ARM, so using it in pci-tegra.c
prevents the driver from being used on other arches.
In __pci_assign_resource(), we clip the available area based on
PCIBIOS_MIN_MEM. On 32-bit ARM, this is pcibios_min_mem, with a default
value of 0x01000000. For Tegra, we discover the space available for PCI
resource allocation from the device tree, and the lowest address that will
ever be available is 0x12000000 (on Tegra124).
The Tegra windows are always higher than the default pcibios_min_mem, so
the __pci_assign_resource() has no effect, so there's no need to adjust
pcibios_min_mem here.
[bhelgaas: changelog]
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Use the pci_remap_iospace() function provided by the PCI core, rather
than the 32-bit ARM-specific pci_ioremap_io().
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Most of the register definitions use lowercase hexadecimal values, with a
few exceptions using uppercase. Convert the latter to be more in line with
the former.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
SR-IOV disabled from the host causes a memory leak. pci-hyperv usually
first receives a PCI_EJECT notification and then proceeds to delete the
hpdev list entry in hv_eject_device_work(). Later in hv_msi_free() since
the device is no longer on the device list hpdev is NULL and hv_msi_free
returns without freeing int_desc as part of hv_int_desc_free().
Signed-off-by: Cathy Avery <cavery@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Jake Oshins <jakeo@microsoft.com>
In dra7xx_pcie_init_irq_domain(), the pattern used to check and return
error is:
if (!var) {
dev_err(...);
return PTR_ERR(var);
}
So the returned value in case of error is always 0, which means 'success'.
Change it to return -ENODEV instead.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Kishon Vijay Abraham I <kishon@ti.com>
In xilinx_pcie_init_irq_domain(), the pattern used to check and return
error is:
if (!var) {
dev_err(...);
return PTR_ERR(var);
}
So the returned value in case of error is always 0, which means 'success'.
Change it to return -ENODEV instead.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Sören Brinkmann <soren.brinkmann@xilinx.com>
Some PCIe devices take a long time to reach link up state after retrain.
Poll for link up status after retraining the link. This is to make sure
the link is up before we access configuration space.
[bhelgaas: changelog]
Signed-off-by: Ley Foon Tan <lftan@altera.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Check the link status before retraining. If the link is not up, don't
bother trying to retrain it.
[bhelgaas: split code move to separate patch, changelog]
Signed-off-by: Ley Foon Tan <lftan@altera.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Move cra_writel(), cra_readl(), and altera_pcie_link_is_up() so a future
patch can use them in altera_pcie_retrain(). No functional change
intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
The switch is the only statement in the resource_list_for_each_entry()
loop, so remove unnecessary "continue" statements in the switch. Simplify
checking for the required non-prefetchable memory aperture.
No functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Use devm_request_pci_bus_resources() to request host bridge window
resources instead of doing it by hand in the driver.
No functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Use devm_request_pci_bus_resources() to request host bridge window
resources instead of doing it by hand in the driver.
No functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
41534e5378 ("PCI: tegra: Implement a proper resource hierarchy") did two
things:
1) It added a top-level resource that encloses all resources declared in
the DT description, including registers and bridge apertures, and
2) It requested the bridge apertures, which means the PCI core can track
the resources used by PCI devices below the bridge.
The latter is necessary, but the former is questionable because there's no
guarantee that the bridge registers and the apertures are contiguous. In
this example:
# cat /proc/iomem
00000000-3fffffff : /pcie-controller@00003000
00000000-00000fff : /pcie-controller@00003000/pci@1,0
00003000-000037ff : pads
00003800-000039ff : afi
10000000-1fffffff : cs
the resource tree claims that [mem 0x00003a00-0x0fffffff] is consumed by
/pcie-controller@00003000, but it's not mentioned in the DT, and it might
actually be used by other devices.
Remove the top-level resource so we don't claim more than the device
actually consumes.
This reintroduces the problem that we can't match the resources, e.g.,
"pads", "afi", "cs", etc., to the DT device. I think this should be solved
by having the DT core request all resources of all devices in the DT (it
does not do that today). If a driver claims the device, it can request the
resources it uses. For example:
# cat /proc/iomem
00000000-00000fff : /pcie-controller@00003000
00000000-00000fff : /pcie-controller@00003000/pci@1,0
00003000-000037ff : /pcie-controller@00003000
00003000-000037ff : pads
00003800-000039ff : /pcie-controller@00003000
00003800-000039ff : afi
10000000-1fffffff : /pcie-controller@00003000
10000000-1fffffff : cs
...
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
The switch is the only statement in the resource_list_for_each_entry()
loop, so remove unnecessary cases and "continue" statements in the switch.
Inline rcar_pcie_release_of_pci_ranges(), which is only called once.
No functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Use devm_request_pci_bus_resources() to request host bridge window
resources instead of doing it by hand in the driver.
No functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Request host bridge window resources so they appear in ioport_resource and
iomem_resource and are reflected in /proc/ioports and /proc/iomem.
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Previously we added a dummy I/O port region even though the R-Car
controller doesn't support PCI port I/O. This resulted in bogus root bus
resources like this:
pci_bus 0000:00: root bus resource [io 0xee080000-0xee0810ff]
pci_bus 0000:00: root bus resource [mem 0xee080000-0xee0810ff]
Drop the unused dummy I/O port region and set struct hw_pci.io_optional so
the ARM PCI code doesn't add a default one for us.
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
We claim PCI BAR and bridge window resources in pci_bus_assign_resources(),
but when PCI_PROBE_ONLY is set, we treat those resources as immutable and
don't call pci_bus_assign_resources(), so the resources aren't put in the
resource tree.
When the resources aren't in the tree, they don't show up in /proc/iomem,
we can't detect conflicts, and we need special cases elsewhere for
PCI_PROBE_ONLY or resources without a parent pointer.
Claim all PCI BAR and window resources in the PCI_PROBE_ONLY case.
If a PCI_PROBE_ONLY platform assigns conflicting resources, Linux can't fix
the conflicts. Previously we didn't notice the conflicts, but now we will,
which may expose new failures.
[bhelgaas: changelog, summarize comment]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Will Deacon <will.deacon@arm.com>
CC: Arnd Bergmann <arnd@arndb.de>
CC: David Daney <david.daney@cavium.com>
Use devm_request_pci_bus_resources() to request host bridge window
resources instead of doing it by hand in the driver.
No functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
The switch is the only statement in the resource_list_for_each_entry()
loop, so remove unnecessary "continue" statements in the switch. Remove
unnecessary "goto" statements and label. Simplify checking for the
required non-prefetchable memory aperture.
No functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Use devm_request_pci_bus_resources() to request host bridge window
resources instead of doing it by hand in the driver.
No functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
The switch is the only statement in the resource_list_for_each_entry()
loop, so remove unnecessary "continue" statements in the switch. Simplify
checking for the required non-prefetchable memory aperture. Inline
altera_pcie_release_of_pci_ranges(), which is only called once.
No functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Use devm_request_pci_bus_resources() to request host bridge window
resources instead of doing it by hand in the driver.
No functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Request host bridge window resources so they appear in ioport_resource and
iomem_resource and are reflected in /proc/ioports and /proc/iomem.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
of_pci_get_host_bridge_resources() allocates a list of resources for host
bridge windows. If we fail after allocating that list, free it before we
return error.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Request host bridge window resources so they appear in ioport_resource and
iomem_resource and are reflected in /proc/ioports and /proc/iomem.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
of_pci_get_host_bridge_resources() allocates a list of resources for host
bridge windows. If we fail after allocating that list, free it before we
return error.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Request host bridge window resources so they appear in ioport_resource and
iomem_resource and are reflected in /proc/ioports and /proc/iomem.
For example, the following entries did not previously appear in /proc/iomem:
e180000000-e1ffffffff : /soc/pcie@1f2b0000
e180000000-e182ffffff : PCI Bus 0000:01
e180000000-e181ffffff : 0000:01:00.0
e182000000-e1820fffff : 0000:01:00.0
e182100000-e1821fffff : 0000:01:00.0
f000000000-ffffffffff : /soc/pcie@1f2b0000
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
of_pci_get_host_bridge_resources() allocates a list of resources for host
bridge windows. If we fail after allocating that list, free it before we
return error.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Request host bridge window resources so they appear in ioport_resource and
iomem_resource and are reflected in /proc/ioports and /proc/iomem.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
The switch is the only statement in the resource_list_for_each_entry()
loop, so remove unnecessary "continue" statements in the switch.
No functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Request host bridge window resources so they appear in ioport_resource and
iomem_resource and are reflected in /proc/ioports and /proc/iomem.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
of_pci_get_host_bridge_resources() allocates a list of resources for host
bridge windows. If we fail after allocating that list, free it before we
return error.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
When we have an interrupt from the host we have a bit set in event page
indicating there are messages for the particular channel. We need to read
them all as we won't get signaled for what was on the queue before we
cleared the bit in vmbus_on_event(). This applies to all Hyper-V drivers
and the pass-through driver should do the same.
I did not meet any bugs; the issue was found by code inspection. We don't
have many events going through hv_pci_onchannelcallback(), which explains
why nobody reported the issue before.
While on it, fix handling non-zero vmbus_recvpacket_raw() return values by
dropping out. If the return value is not zero, it is wrong to inspect
buffer or bytes_recvd as these may contain invalid data.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Jake Oshins <jakeo@microsoft.com>
We don't free buffer on several code paths in hv_pci_onchannelcallback(),
put kfree() to the end of the function to fix the issue. Direct { kfree();
return; } can now be replaced with a simple 'break';
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Jake Oshins <jakeo@microsoft.com>
The PCI_MSI symbol is used inconsistently throughout the tree, with some
drivers using 'select' and others using 'depends on', or using conditional
selects. This keeps causing problems; the latest one is a result of
ARCH_ALPINE using a 'select' statement to enable its platform-specific MSI
driver without enabling MSI:
warning: (ARCH_ALPINE) selects ALPINE_MSI which has unmet direct dependencies (PCI && PCI_MSI)
drivers/irqchip/irq-alpine-msi.c:104:15: error: variable 'alpine_msix_domain_info' has initializer but incomplete type
static struct msi_domain_info alpine_msix_domain_info = {
^~~~~~~~~~~~~~~
drivers/irqchip/irq-alpine-msi.c:105:2: error: unknown field 'flags' specified in initializer
.flags = MSI_FLAG_USE_DEF_DOM_OPS | MSI_FLAG_USE_DEF_CHIP_OPS |
^
drivers/irqchip/irq-alpine-msi.c:105:11: error: 'MSI_FLAG_USE_DEF_DOM_OPS' undeclared here (not in a function)
.flags = MSI_FLAG_USE_DEF_DOM_OPS | MSI_FLAG_USE_DEF_CHIP_OPS |
^~~~~~~~~~~~~~~~~~~~~~~~
There is little reason to enable PCI support for a platform that uses MSI
but then leave MSI disabled at compile time.
Select PCI_MSI from irqchips that implement MSI, and make PCI host bridges
that use MSI on ARM depend on PCI_MSI_IRQ_DOMAIN.
For all three architectures that support PCI_MSI_IRQ_DOMAIN (ARM, ARM64,
X86), enable it by default whenever MSI is enabled.
[bhelgaas: changelog, omit crypto config change]
Suggested-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
The Axis ARTPEC-6 SoC integrates a PCIe controller from Synopsys. Add a
new driver that provides the small glue needed to use the existing
DesignWare driver to make it work on the Axis ARTPEC-6 SoC.
[bhelgaas: return errors directly without gotos, fold in section mismatch
fix]
Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
The generic PCI host controller calls of_irq_parse_and_map_pci() in its IRQ
fixup, but that function is only available when CONFIG_IRQ_DOMAIN is set:
drivers/pci/built-in.o: In function `pci_host_common_probe':
drivers/pci/host/pci-host-common.c:181: undefined reference to `of_irq_parse_and_map_pci'
There is no downside in enabling the domains here, so use a Kconfig
select statement to ensure it's always available to this driver.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Add a parent device field to struct pci_config_window. The parent is not
saved now, but will be useful to save it in some cases. For ACPI on ARM64,
it can be used to setup ACPI companion and domain.
Since the parent dev is in struct pci_config_window now, we need not pass
it to the init function as a separate argument.
Signed-off-by: Jayachandran C <jchandra@broadcom.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
This header will be used from arch/arm64 for ACPI PCI implementation so it
needs to be moved out of drivers/pci.
Update users of the header file to use the new name. No functional
changes.
Signed-off-by: Jayachandran C <jchandra@broadcom.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Here's the big char and misc driver update for 4.7-rc1.
Lots of different tiny driver subsystems have updates here with new
drivers and functionality. Details in the shortlog.
All have been in linux-next with no reported issues for a while.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iEYEABECAAYFAlc/0YYACgkQMUfUDdst+ynmtACeLpLLKZsy1v7WfkW92cLSOPBD
2C8AoLFPKoh55rlOJrNz3bW9ANAaOloX
=/nsL
-----END PGP SIGNATURE-----
Merge tag 'char-misc-4.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc driver updates from Greg KH:
"Here's the big char and misc driver update for 4.7-rc1.
Lots of different tiny driver subsystems have updates here with new
drivers and functionality. Details in the shortlog.
All have been in linux-next with no reported issues for a while"
* tag 'char-misc-4.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (125 commits)
mcb: Delete num_cells variable which is not required
mcb: Fixed bar number assignment for the gdd
mcb: Replace ioremap and request_region with the devm version
mcb: Implement bus->dev.release callback
mcb: export bus information via sysfs
mcb: Correctly initialize the bus's device
mei: bus: call mei_cl_read_start under device lock
coresight: etb10: adjust read pointer only when needed
coresight: configuring ETF in FIFO mode when acting as link
coresight: tmc: implementing TMC-ETF AUX space API
coresight: moving struct cs_buffers to header file
coresight: tmc: keep track of memory width
coresight: tmc: make sysFS and Perf mode mutually exclusive
coresight: tmc: dump system memory content only when needed
coresight: tmc: adding mode of operation for link/sinks
coresight: tmc: getting rid of multiple read access
coresight: tmc: allocating memory when needed
coresight: tmc: making prepare/unprepare functions generic
coresight: tmc: splitting driver in ETB/ETF and ETR components
coresight: tmc: cleaning up header file
...
Enumeration
Refine PCI support check in pcibios_init() (Adrian-Ken Rueegsegger)
Provide common functions for ECAM mapping (Jayachandran C)
Allow all PCIe services on non-ACPI host bridges (Jon Derrick)
Remove return values from pcie_port_platform_notify() and relatives (Jon Derrick)
Widen portdrv service type from 4 bits to 8 bits (Keith Busch)
Add Downstream Port Containment portdrv service type (Keith Busch)
Add Downstream Port Containment driver (Keith Busch)
Resource management
Identify Enhanced Allocation (EA) BAR Equivalent resources in sysfs (Alex Williamson)
Supply CPU physical address (not bus address) to iomem_is_exclusive() (Bjorn Helgaas)
alpha: Call iomem_is_exclusive() for IORESOURCE_MEM, but not IORESOURCE_IO (Bjorn Helgaas)
Mark Broadwell-EP Home Agent 1 as having non-compliant BARs (Prarit Bhargava)
Disable all BAR sizing for devices with non-compliant BARs (Prarit Bhargava)
Move PCI I/O space management from OF to PCI core code (Tomasz Nowicki)
PCI device hotplug
acpiphp_ibm: Avoid uninitialized variable reference (Dan Carpenter)
Use cached copy of PCI_EXP_SLTCAP_HPC bit (Lukas Wunner)
Virtualization
Mark Intel i40e NIC INTx masking as broken (Alex Williamson)
Reverse standard ACS vs device-specific ACS enabling (Alex Williamson)
Work around Intel Sunrise Point PCH incorrect ACS capability (Alex Williamson)
IOMMU
Add pci_add_dma_alias() to abstract implementation (Bjorn Helgaas)
Move informational printk to pci_add_dma_alias() (Bjorn Helgaas)
Add support for multiple DMA aliases (Jacek Lawrynowicz)
Add DMA alias quirk for mic_x200_dma (Jacek Lawrynowicz)
Thunderbolt
Fix double free of drom buffer (Andreas Noever)
Add Intel Thunderbolt device IDs (Lukas Wunner)
Fix typos and magic number (Lukas Wunner)
Support 1st gen Light Ridge controller (Lukas Wunner)
Generic host bridge driver
Use generic ECAM API (Jayachandran C)
Cavium ThunderX host bridge driver
Don't clobber read-only bits in bridge config registers (David Daney)
Use generic ECAM API (Jayachandran C)
Freescale i.MX6 host bridge driver
Use enum instead of bool for variant indicator (Andrey Smirnov)
Implement reset sequence for i.MX6+ (Andrey Smirnov)
Factor out ref clock enable (Bjorn Helgaas)
Add initial imx6sx support (Christoph Fritz)
Add reset-gpio-active-high boolean property to DT (Petr Štetiar)
Add DT property for link gen, default to Gen1 (Tim Harvey)
dts: Specify imx6qp version of PCIe core (Andrey Smirnov)
dts: Fix PCIe reset GPIO polarity on Toradex Apalis Ixora (Petr Štetiar)
Marvell Armada host bridge driver
add DT binding for Marvell Armada 7K/8K PCIe controller (Thomas Petazzoni)
Add driver for Marvell Armada 7K/8K PCIe controller (Thomas Petazzoni)
Marvell MVEBU host bridge driver
Constify mvebu_pcie_pm_ops structure (Jisheng Zhang)
Use SET_NOIRQ_SYSTEM_SLEEP_PM_OPS for mvebu_pcie_pm_ops (Jisheng Zhang)
Microsoft Hyper-V host bridge driver
Report resources release after stopping the bus (Vitaly Kuznetsov)
Add explicit barriers to config space access (Vitaly Kuznetsov)
Renesas R-Car host bridge driver
Select PCI_MSI_IRQ_DOMAIN (Arnd Bergmann)
Synopsys DesignWare host bridge driver
Remove incorrect RC memory base/limit configuration (Gabriele Paoloni)
Move Root Complex setup code to dw_pcie_setup_rc() (Jisheng Zhang)
TI Keystone host bridge driver
Add error IRQ handler (Murali Karicheri)
Remove unnecessary goto statement (Murali Karicheri)
Miscellaneous
Fix spelling errors (Colin Ian King)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=68Iz
-----END PGP SIGNATURE-----
Merge tag 'pci-v4.7-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Refine PCI support check in pcibios_init() (Adrian-Ken Rueegsegger)
- Provide common functions for ECAM mapping (Jayachandran C)
- Allow all PCIe services on non-ACPI host bridges (Jon Derrick)
- Remove return values from pcie_port_platform_notify() and relatives (Jon Derrick)
- Widen portdrv service type from 4 bits to 8 bits (Keith Busch)
- Add Downstream Port Containment portdrv service type (Keith Busch)
- Add Downstream Port Containment driver (Keith Busch)
Resource management:
- Identify Enhanced Allocation (EA) BAR Equivalent resources in sysfs (Alex Williamson)
- Supply CPU physical address (not bus address) to iomem_is_exclusive() (Bjorn Helgaas)
- alpha: Call iomem_is_exclusive() for IORESOURCE_MEM, but not IORESOURCE_IO (Bjorn Helgaas)
- Mark Broadwell-EP Home Agent 1 as having non-compliant BARs (Prarit Bhargava)
- Disable all BAR sizing for devices with non-compliant BARs (Prarit Bhargava)
- Move PCI I/O space management from OF to PCI core code (Tomasz Nowicki)
PCI device hotplug:
- acpiphp_ibm: Avoid uninitialized variable reference (Dan Carpenter)
- Use cached copy of PCI_EXP_SLTCAP_HPC bit (Lukas Wunner)
Virtualization:
- Mark Intel i40e NIC INTx masking as broken (Alex Williamson)
- Reverse standard ACS vs device-specific ACS enabling (Alex Williamson)
- Work around Intel Sunrise Point PCH incorrect ACS capability (Alex Williamson)
IOMMU:
- Add pci_add_dma_alias() to abstract implementation (Bjorn Helgaas)
- Move informational printk to pci_add_dma_alias() (Bjorn Helgaas)
- Add support for multiple DMA aliases (Jacek Lawrynowicz)
- Add DMA alias quirk for mic_x200_dma (Jacek Lawrynowicz)
Thunderbolt:
- Fix double free of drom buffer (Andreas Noever)
- Add Intel Thunderbolt device IDs (Lukas Wunner)
- Fix typos and magic number (Lukas Wunner)
- Support 1st gen Light Ridge controller (Lukas Wunner)
Generic host bridge driver:
- Use generic ECAM API (Jayachandran C)
Cavium ThunderX host bridge driver:
- Don't clobber read-only bits in bridge config registers (David Daney)
- Use generic ECAM API (Jayachandran C)
Freescale i.MX6 host bridge driver:
- Use enum instead of bool for variant indicator (Andrey Smirnov)
- Implement reset sequence for i.MX6+ (Andrey Smirnov)
- Factor out ref clock enable (Bjorn Helgaas)
- Add initial imx6sx support (Christoph Fritz)
- Add reset-gpio-active-high boolean property to DT (Petr Štetiar)
- Add DT property for link gen, default to Gen1 (Tim Harvey)
- dts: Specify imx6qp version of PCIe core (Andrey Smirnov)
- dts: Fix PCIe reset GPIO polarity on Toradex Apalis Ixora (Petr Štetiar)
Marvell Armada host bridge driver:
- add DT binding for Marvell Armada 7K/8K PCIe controller (Thomas Petazzoni)
- Add driver for Marvell Armada 7K/8K PCIe controller (Thomas Petazzoni)
Marvell MVEBU host bridge driver:
- Constify mvebu_pcie_pm_ops structure (Jisheng Zhang)
- Use SET_NOIRQ_SYSTEM_SLEEP_PM_OPS for mvebu_pcie_pm_ops (Jisheng Zhang)
Microsoft Hyper-V host bridge driver:
- Report resources release after stopping the bus (Vitaly Kuznetsov)
- Add explicit barriers to config space access (Vitaly Kuznetsov)
Renesas R-Car host bridge driver:
- Select PCI_MSI_IRQ_DOMAIN (Arnd Bergmann)
Synopsys DesignWare host bridge driver:
- Remove incorrect RC memory base/limit configuration (Gabriele Paoloni)
- Move Root Complex setup code to dw_pcie_setup_rc() (Jisheng Zhang)
TI Keystone host bridge driver:
- Add error IRQ handler (Murali Karicheri)
- Remove unnecessary goto statement (Murali Karicheri)
Miscellaneous:
- Fix spelling errors (Colin Ian King)"
* tag 'pci-v4.7-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (48 commits)
PCI: Disable all BAR sizing for devices with non-compliant BARs
x86/PCI: Mark Broadwell-EP Home Agent 1 as having non-compliant BARs
PCI: Identify Enhanced Allocation (EA) BAR Equivalent resources in sysfs
PCI, of: Move PCI I/O space management to PCI core code
PCI: generic, thunder: Use generic ECAM API
PCI: Provide common functions for ECAM mapping
PCI: hv: Add explicit barriers to config space access
PCI: Use cached copy of PCI_EXP_SLTCAP_HPC bit
PCI: Add Downstream Port Containment driver
PCI: Add Downstream Port Containment portdrv service type
PCI: Widen portdrv service type from 4 bits to 8 bits
PCI: designware: Remove incorrect RC memory base/limit configuration
PCI: hv: Report resources release after stopping the bus
ARM: dts: imx6qp: Specify imx6qp version of PCIe core
PCI: imx6: Implement reset sequence for i.MX6+
PCI: imx6: Use enum instead of bool for variant indicator
PCI: thunder: Don't clobber read-only bits in bridge config registers
thunderbolt: Fix double free of drom buffer
PCI: rcar: Select PCI_MSI_IRQ_DOMAIN
PCI: armada: Add driver for Marvell Armada 7K/8K PCIe controller
...
Driver updates for ARM SoCs, these contain various things that touch
the drivers/ directory but got merged through arm-soc for practical
reasons. For the most part, this is now related to power management
controllers, which have not yet been abstracted into a separate
subsystem, and typically require some code in drivers/soc or arch/arm
to control the power domains.
Another large chunk here is a rework of the NVIDIA Tegra USB3.0
support, which was surprisingly tricky and took a long time to
get done.
Finally, reset controller handling as always gets merged through here
as well.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=x+iD
-----END PGP SIGNATURE-----
Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC driver updates from Arnd Bergmann:
"Driver updates for ARM SoCs, these contain various things that touch
the drivers/ directory but got merged through arm-soc for practical
reasons.
For the most part, this is now related to power management
controllers, which have not yet been abstracted into a separate
subsystem, and typically require some code in drivers/soc or arch/arm
to control the power domains.
Another large chunk here is a rework of the NVIDIA Tegra USB3.0
support, which was surprisingly tricky and took a long time to get
done.
Finally, reset controller handling as always gets merged through here
as well"
* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (97 commits)
arm-ccn: Enable building as module
soc/tegra: pmc: Add generic PM domain support
usb: xhci: tegra: Add Tegra210 support
usb: xhci: Add NVIDIA Tegra XUSB controller driver
dt-bindings: usb: xhci-tegra: Add Tegra210 XUSB controller support
dt-bindings: usb: Add NVIDIA Tegra XUSB controller binding
PCI: tegra: Support per-lane PHYs
dt-bindings: pci: tegra: Update for per-lane PHYs
phy: tegra: Add Tegra210 support
phy: Add Tegra XUSB pad controller support
dt-bindings: phy: tegra-xusb-padctl: Add Tegra210 support
dt-bindings: phy: Add NVIDIA Tegra XUSB pad controller binding
phy: core: Allow children node to be overridden
clk: tegra: Add interface to enable hardware control of SATA/XUSB PLLs
drivers: firmware: psci: make two helper functions inline
soc: renesas: rcar-sysc: Add support for R-Car H3 power areas
soc: renesas: rcar-sysc: Add support for R-Car E2 power areas
soc: renesas: rcar-sysc: Add support for R-Car M2-N power areas
soc: renesas: rcar-sysc: Add support for R-Car M2-W power areas
soc: renesas: rcar-sysc: Add support for R-Car H2 power areas
...
As usual, a bunch of commits, mostly adding drivers and other options to
defconfigs.
We are adding three new defconfig files for the newly added 32-bit
machines (aspeed and mps2), the rest is mainly housekeeping.
The changes outside of arch/arm/config/ are for a Kconfig symbol
that got renamed.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=ecJp
-----END PGP SIGNATURE-----
Merge tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC defconfig updates from Arnd Bergmann:
"As usual, a bunch of commits, mostly adding drivers and other options
to defconfigs.
We are adding three new defconfig files for the newly added 32-bit
machines (aspeed and mps2), the rest is mainly housekeeping.
The changes outside of arch/arm/config/ are for a Kconfig symbol that
got renamed"
* tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (63 commits)
ARM: aspeed: adapt defconfigs for new CONFIG_PRINTK_TIME
ARM: u8500_defconfig: update sensor config
ARM: u8500_defconfig: remove staging from defconfig
ARM: multi_v7_defconfig: Remove unused Kconfig option MACH_UX500_DT
ARM: at91/defconfig: sama5: add CONFIG_FHANDLE
arm/configs: Add Aspeed defconfig
arm/configs/multi_v5: Add Aspeed ast2400
ARM: at91: sama5: Update defconfig
ARM: imx_v6_v7_defconfig: add CONFIG_MICREL_PHY
ARM: imx_v6_v7_defconfig: add CONFIG_I2C_GPIO
ARM: multi_v7: Enable Tegra XUSB controller in defconfig
ARM: tegra: Enable XUSB controller in defconfig
ARM: omap2plus_defconfig: Enable PWM and ir-rx51 as loadable modules
ARM: multi_v7_defconfig: add the Atmel sama5d2-compatible ADC driver
ARM: multi_v7_defconfig: add the Atmel Audio microphone interface PDMIC
ARM: multi_v7_defconfig: add Atmel ISI (Image Sensor Interface) driver
ARM: multi_v7_defconfig: add Atmel watchdog timers
ARM: multi_v7_defconfig: add HLCDC drivers as modules
ARM: at91/defconfig: add PDMIC driver to sama5_defconfig
ARM: at91/defconfig: add HLCDC driver to sama5_defconfig
...
* pci/arm64:
PCI, of: Move PCI I/O space management to PCI core code
PCI: generic, thunder: Use generic ECAM API
PCI: Provide common functions for ECAM mapping
* pci/host-hv:
PCI: hv: Add explicit barriers to config space access
Use functions provided by drivers/pci/ecam.h for mapping the config space
in drivers/pci/host/pci-host-common.c, and update its users to use 'struct
pci_config_window' and 'struct pci_ecam_ops'.
The changes are mostly to use 'struct pci_config_window' in place of
'struct gen_pci'. Some of the fields of gen_pci were only used temporarily
and can be eliminated by using local variables or function arguments, these
are not carried over to struct pci_config_window.
pci-thunder-ecam.c and pci-thunder-pem.c are the only users of the
pci_host_common_probe function and the gen_pci structure; these have been
updated to use the new API as well.
The patch does not introduce any functional changes other than a very minor
one: with the new code, on 64-bit platforms, we do just a single ioremap
for the whole config space.
Signed-off-by: Jayachandran C <jchandra@broadcom.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
I'm trying to pass-through Broadcom BCM5720 NIC (Dell device 1f5b) on a
Dell R720 server. Everything works fine when the target VM has only one
CPU, but SMP guests reboot when the NIC driver accesses PCI config space
with hv_pcifront_read_config()/hv_pcifront_write_config(). The reboot
appears to be induced by the hypervisor and no crash is observed. Windows
event logs are not helpful at all ('Virtual machine ... has quit
unexpectedly'). The particular access point is always different and
putting debug between them (printk/mdelay/...) moves the issue further
away. The server model affects the issue as well: on Dell R420 I'm able to
pass-through BCM5720 NIC to SMP guests without issues.
While I'm obviously failing to reveal the essence of the issue I was able
to come up with a (possible) solution: if explicit barriers are added to
hv_pcifront_read_config()/hv_pcifront_write_config() the issue goes away.
The essential minimum is rmb() at the end on _hv_pcifront_read_config() and
wmb() at the end of _hv_pcifront_write_config() but I'm not confident it
will be sufficient for all hardware. I suggest the following barriers:
1) wmb()/mb() between choosing the function and writing to its space.
2) mb() before releasing the spinlock in both _hv_pcifront_read_config()/
_hv_pcifront_write_config() to ensure that consecutive reads/writes to
the space won't get re-ordered as drivers may count on that.
Config space access is not supposed to be performance-critical so these
explicit barriers should not cause any slowdown.
[bhelgaas: use Linux "barriers" terminology]
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Jake Oshins <jakeo@microsoft.com>
Currently dw_pcie_setup_rc() configures memory base and memory limit in the
type1 configuration header for the root complex. In doing so it uses the
CPU address (pp->mem_base) rather than the bus address (pp->mem_bus_addr).
This is wrong and it is useless since the configuration is overwritten
later on when pci_bus_assign_resources() is called.
Remove this configuration from dw_pcie_setup_rc().
Signed-off-by: Gabriele Paoloni <gabriele.paoloni@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Pratyush Anand <pratyush.anand@gmail.com>
Kernel hang is observed when pci-hyperv module is release with device
drivers still attached. E.g., when I do 'rmmod pci_hyperv' with BCM5720
device pass-through-ed (tg3 module) I see the following:
NMI watchdog: BUG: soft lockup - CPU#1 stuck for 22s! [rmmod:2104]
...
Call Trace:
[<ffffffffa0641487>] tg3_read_mem+0x87/0x100 [tg3]
[<ffffffffa063f000>] ? 0xffffffffa063f000
[<ffffffffa0644375>] tg3_poll_fw+0x85/0x150 [tg3]
[<ffffffffa0649877>] tg3_chip_reset+0x357/0x8c0 [tg3]
[<ffffffffa064ca8b>] tg3_halt+0x3b/0x190 [tg3]
[<ffffffffa0657611>] tg3_stop+0x171/0x230 [tg3]
...
[<ffffffffa064c550>] tg3_remove_one+0x90/0x140 [tg3]
[<ffffffff813bee59>] pci_device_remove+0x39/0xc0
[<ffffffff814a3201>] __device_release_driver+0xa1/0x160
[<ffffffff814a32e3>] device_release_driver+0x23/0x30
[<ffffffff813b794a>] pci_stop_bus_device+0x8a/0xa0
[<ffffffff813b7ab6>] pci_stop_root_bus+0x36/0x60
[<ffffffffa02c3f38>] hv_pci_remove+0x238/0x260 [pci_hyperv]
The problem seems to be that we report local resources release before
stopping the bus and removing devices from it and device drivers may try to
perform some operations with these resources on shutdown. Move resources
release report after we do pci_stop_root_bus().
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Jake Oshins <jakeo@microsoft.com>
I.MX6+ has a dedicated bit for resetting PCIe core, which should be used
instead of a regular reset sequence since using the latter will hang the
SoC.
This commit is based on c34068d48273e24d392d9a49a38be807954420ed from
http://git.freescale.com/git/cgit.cgi/imx/linux-2.6-imx.git
Tested-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Use enumerated type instead of a boolean flag to specify the variant of
the PCIe IP block (6Q, 6SX, etc). This patch has zero functional impact,
however it makes the code easier to extend for the case of more than 2
possible variants of an IP block (of which there are).
[bhelgaas: rewrap comment, remove extra blank line]
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
The 32-bit addressing modes in the I/O and Prefetchable Memory registers
are required to be read-only. Since the underlying access method allows
them to be set, emulate their read-only nature and always set them.
Signed-off-by: David Daney <david.daney@cavium.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
The R-Car PCIe driver requires the use of IRQ domains for its MSI code:
drivers/pci/host/pcie-rcar.c:635:9: error: implicit declaration of function 'irq_find_mapping' [-Werror=implicit-function-declaration]
drivers/pci/host/pcie-rcar.c:666:8: error: implicit declaration of function 'irq_create_mapping' [-Werror=implicit-function-declaration]
...
Add a Kconfig select to ensure that the feature is always enabled.
This is not consistent with what the other drivers do at the moment, but I
have another patch that changes them to do it like this one, which is more
logical.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
This patch modifies all the callers of vmbus_mmio_allocate()
to call vmbus_mmio_free() instead of release_mem_region().
Signed-off-by: Jake Oshins <jakeo@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The current XUSB pad controller bindings are insufficient to describe
PHY devices attached to USB controllers. New bindings have been created
to overcome these restrictions. As a side-effect each root port now is
assigned a set of PHY devices, one for each lane associated with the
root port. This has the benefit of allowing fine-grained control of the
power management for each lane.
Acked-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The Marvell Armada 7K/8K SoCs integrate a PCIe controller from Synopsys.
Add a new driver that provides the small glue needed to use the existing
Designware driver to make it work on Marvell Armada 7K/8K SoCs.
The MSI support will be enabled at a later point.
[bhelgaas: use dev_dbg(), dw_pcie_wait_for_link()]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Fix the misuse of goto statement in ks_pcie_get_irq_controller_info() as
simple return is more appropriate for this function. While at it add an
error log for absence of interrupt controller node.
[bhelgaas: drop "ret" altogether since we always know the return value]
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: Rob Herring <robh+dt@kernel.org>
CC: Pawel Moll <pawel.moll@arm.com>
CC: Mark Rutland <mark.rutland@arm.com>
CC: Ian Campbell <ijc+devicetree@hellion.org.uk>
CC: Kumar Gala <galak@codeaurora.org>
It appears that Gen2 is a misnomer for the R-Car PCIE driver
which also supports Gen 1 and Gen 3 SoCs. Accordingly, drop Gen 2
from the help text and Kconfig symbol.
Also, re-arange the Kconfig symbol name to use PCIE as the prefix.
This appears to be in keeping with other PCIE Kconfig symbols.
Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Freescale has stated [1] that the LVDS clock source of the IMX6 does not
pass the PCI Gen2 clock jitter test, therefore unless an external Gen2
compliant external clock source is present and supplied back to the IMX6
PCIe core via LVDS CLK1/CLK2 you can not claim Gen2 compliance.
Add a DT property to specify Gen1 vs Gen2 and check this before allowing a
Gen2 link.
We default to Gen1 if the property is not present because at this time
there are no IMX6 boards in mainline that 'input' a clock on LVDS
CLK1/CLK2.
In order to be Gen2 compliant on IMX6 you need to:
- Have a Gen2 compliant external clock generator and route that clock back
to either LVDS CLK1 or LVDS CLK2 as an input (see IMX6SX-SabreSD
reference design).
- Specify this clock in the PCIe node in the DT (i.e.,
IMX6QDL_CLK_LVDS1_IN or IMX6QDL_CLK_LVDS2_IN instead of
IMX6QDL_CLK_LVDS1_GATE which configures it as a CLK output).
[1] https://community.freescale.com/message/453209
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
CC: Fabio Estevam <fabio.estevam@freescale.com>
CC: Zhu Richard <Richard.Zhu@freescale.com>
CC: Akshay Bhat <akshay.bhat@timesys.com>
CC: Rob Herring <robh+dt@kernel.org>
CC: Shawn Guo <shawnguo@kernel.org>
Currently the reset-gpio DT property which controls the PCI bus device
reset signal defaults to active-low reset sequence (L=reset state,
H=operation state) plus the code in reset function isn't GPIO polarity
aware - it doesn't matter if the defined reset-gpio is active-low or
active-high, it will always result into active-low reset sequence.
I've tried to fix it properly and change the reset-gpio reset sequence to
be polarity-aware, but this patch has been accepted and then reverted as it
has introduced few backward incompatible issues:
1. Some DTBs, for example, imx6qdl-sabresd, don't define reset-gpio
polarity correctly:
reset-gpio = <&gpio7 12 0>;
which means that it's defined as active-high, but in reality it's
active-low; thus it wouldn't work without a DTS fix.
2. The logic in the reset function is inverted:
gpio_set_value_cansleep(imx6_pcie->reset_gpio, 0)
msleep(100);
gpio_set_value_cansleep(imx6_pcie->reset_gpio, 1);
so even if some of the i.MX6 boards had reset-gpio polarity defined
correctly in their DTSes, they would stop working.
As we can't break old DTBs, we can't fix them, so we need to introduce this
new DT reset-gpio-active-high boolean property so we can support boards
with active-high reset sequence.
This active-high reset sequence is for example needed on Apalis SoMs, where
GPIO1_IO28, used to PCIe reset is not connected directly to PERST# PCIe
signal, but it's ORed with RESETBMCU coming off the PMIC, and thus is
inverted, active-high.
Tested-by: Tim Harvey <tharvey@gateworks.com> # Gateworks Ventana boards (which have active-low PERST#)
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Acked-by: Rob Herring <robh@kernel.org>
Add initial PCIe support for the imx6 SoC derivate imx6sx. PCI MSI support
is untested as the necessary suspend/resume quirk is not included in this
patch.
This patch is heavily based on patches by Richard Zhu.
[bhelgaas: factor out refclk enable, fix adjacent typos in imx6q-pcie.txt]
Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com>
Acked-by: Richard Zhu <Richard.Zhu@freescale.com>
Acked-by: Lucas Stach <l.stach@pengutronix.de>
Factor out ref clock enable to make it cleaner to add imx6sx support. No
functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Christoph Fritz <chf.fritz@googlemail.com>
Keystone PCI hardware generates error interrupts at RC using a platform IRQ
instead of a standard MSI or legacy IRQ. Add a simple error handler that
logs the fatal interrupt status to the console.
[bhelgaas: s/node/dev->of_node/, tidy comments, return irqreturn_t directly]
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Rob Herring <robh@kernel.org>
CC: Pawel Moll <pawel.moll@arm.com>
CC: Mark Rutland <mark.rutland@arm.com>
CC: Ian Campbell <ijc+devicetree@hellion.org.uk>
CC: Kumar Gala <galak@codeaurora.org>
Use the SET_NOIRQ_SYSTEM_SLEEP_PM_OPS helper macro for mvebu_pcie_pm_ops.
The macro also sets up freeze_noirq, thaw_noirq and poweroff_noirq,
restore_noirq accordingly.
Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The mvebu_pcie_pm_ops structure is never modified, so declare it as const.
Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
dw_pcie_host_init() looks up host bridge resources, ioremaps them, creates
IRQ domains, and enumerates devices below the bridge. dw_pcie_setup_rc()
programs the Root Complex registers. The Root Complex may lose power
during suspend-to-RAM, and when we resume, we want to redo the latter but
not the former.
Move some Root Complex programming from dw_pcie_host_init() to
dw_pcie_setup_rc() where it belongs. DesignWare-based drivers can call
dw_pcie_setup_rc() in their resume paths.
[Niklas Cassel <niklas.cassel@axis.com>: This change moves outbound ATU
programming, which uses pp->mem_base, to dw_pcie_setup_rc(). Apply the
dra7xx pp->mem_base update before calling dw_pcie_setup_rc().]
[bhelgaas: changelog, fold in dra7xx fix from Niklas]
Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Pratyush Anand <pratyush.anand@gmail.com>
Commit 5c5fb40de8 ("PCI: imx6: Add support for active-low reset GPIO")
cause regressions on some boards like MX6 Gateworks Ventana, for example.
The reason for the breakage is that this commit sets the GPIO polarity in
the wrong logic level.
Also, the commit log is wrong because active-low reset GPIO is what the
driver used to support since the beginning.
So keep the old behavior that ignores the GPIO polarity specified in the
device tree and treat the PCI reset GPIO as active-low.
Reported-by: Krzysztof Hałasa <khalasa@piap.pl>
Tested-by: Tim Harvey <tharvey@gateworks.com> # Gateworks Ventana
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Tim Harvey <tharvey@gateworks.com>
Acked-by: Lucas Stach <l.stach@pengutronix.de>
CC: stable@vger.kernel.org # v4.5+
Fix spelling of "initalization".
[bhelgaas: also fix pci/pci.c]
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Revert 5c3b99d057 ("PCI: dra7xx: Mark driver as broken").
1c96bee4df ("ARM: DRA7: hwmod: Add custom reset handler for PCIeSS")
added support to de-assert PCIe reset, so DRA7x PCIe is not broken anymore.
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
* pci/host-hv:
PCI: hv: Add paravirtual PCI front-end for Microsoft Hyper-V VMs
PCI: Look up IRQ domain by fwnode_handle
PCI: Add fwnode_handle to x86 pci_sysdata
* pci/host-designware:
PCI: designware: Add driver for prototyping kits based on ARC SDP
PCI: designware: Add default link up check if sub-driver doesn't override
PCI: designware: Add generic dw_pcie_wait_for_link()
ARC: Add PCI support
Add a default DesignWare "link_up" test for use when a sub-driver doesn't
supply its own pcie_host_ops.link_up() method.
[bhelgaas: changelog, split into its own patch]
Signed-off-by: Joao Pinto <jpinto@synopsys.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Pratyush Anand <pratyush.anand@gmail.com>
Several DesignWare-based drivers (dra7xx, exynos, imx6, keystone, qcom, and
spear13xx) had similar loops waiting for the link to come up.
Add a generic dw_pcie_wait_for_link() for use by all these drivers so the
waiting is done consistently, e.g., always using usleep_range() rather than
mdelay() and using similar timeouts and retry counts.
Note that this changes the Keystone link training/wait for link strategy,
so we initiate link training, then wait longer for the link to come up
before re-initiating link training.
[bhelgaas: changelog, split into its own patch, update pci-keystone.c, pcie-qcom.c]
Signed-off-by: Joao Pinto <jpinto@synopsys.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Pratyush Anand <pratyush.anand@gmail.com>
The cavium,pci-thunder-ecam devices are exactly ECAM-based PCI root
complexes. These root complexes (loosely referred to as ECAM units in the
hardware manuals) are used to access the Thunder on-chip devices. They
are special in that all the BARs on devices behind these root complexes are
at fixed addresses.
Add a driver for these devices that synthesizes Enhanced Allocation (EA)
capability entries for each BAR.
Since this EA synthesis is needed for exactly two chip models, we can hard-
code some assumptions about the device topology and the layout of the
config space of specific DEVFNs in the driver.
[bhelgaas: changelog, whitespace]
Signed-off-by: David Daney <david.daney@cavium.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Rob Herring <robh@kernel.org>
The root complexes used to access off-chip PCIe devices (called PEM units
in the hardware manuals) on some Cavium ThunderX processors require quirky
access methods for the config space of the PCIe bridge.
Add a driver to provide these config space accessor functions. Use the
pci-host-common code to configure the PCI machinery.
Signed-off-by: David Daney <david.daney@cavium.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Move pci_host_common_probe() and associated functions to pci-host-common.c,
where it can be shared with other drivers. Make it public (not static)
and update Kconfig and Makefile to build it. No functional change
intended.
[bhelgaas: split into separate patch, changelog]
Signed-off-by: David Daney <david.daney@cavium.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Will Deacon <will.deacon@arm.com>
Factor gen_pci_probe(), moving most of it into pci_host_common_probe()
where it can be shared with other drivers that have slightly different
config accessors. No functional change intended.
[bhelgaas: split into separate patch, changelog]
Signed-off-by: David Daney <david.daney@cavium.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Will Deacon <will.deacon@arm.com>
Move definitions for generic PCI host controller driver structures to a
separate header file so we can share them with other drivers. No
functional change intended.
[bhelgaas: split into separate patch, changelog]
Signed-off-by: David Daney <david.daney@cavium.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Will Deacon <will.deacon@arm.com>
A SerDes PHY is optional, so if devm_phy_get() doesn't find one at all,
that's fine. But if devm_phy_get() finds a PHY that doesn't have a driver
yet, it returns -EPROBE_DEFER. In that case, defer probing the Keystone
driver. We may be able to load it later after a PHY driver is loaded.
[bhelgaas: changelog, check for -EPROBE_DEFER first]
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Originally altera_pcie_link_is_up() decided the link was up if any of the
low four bits of the LTSSM register were set. But the link is only up if
the LTSSM state is L0, so check for that exact value.
[bhelgaas: changelog]
Signed-off-by: Ley Foon Tan <lftan@altera.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Make the R-Car drivers depend on ARCH_RENESAS instead of ARCH_SHMOBILE.
This is part of an ongoing process to migrate from ARCH_SHMOBILE to
ARCH_RENESAS. The motivation is that RENESAS seems to be a more
appropriate name than SHMOBILE for the majority of Renesas ARM-based SoCs.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
BARs are disabled when the size register is 0, so it's misleading to write
a base address into the start register.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Track the offsets of the bus -> CPU mapping for I/O and memory. This is
cosmetic for current Tegra chips because the offset is always 0. But to
properly support legacy use-cases, like VGA, this would be needed so that
PCI bus addresses can be relocated.
While at it, also request the I/O resource both in physical memory and I/O
space to make /proc/iomem consistent, as well as add the I/O region to the
list of host bridge resources.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
The num_ports field of the tegra_pcie structure is never used so remove it.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
The configuration space mapping on Tegra is somewhat special, and in order
to avoid wasting virtual address space the configuration space for each bus
needs to be stitched together from several blocks which form a single
continuous virtual address range for accessors.
Currently the configuration space is mapped upon the first access to one of
its registers. However, the mapping operation may sleep under certain
circumstances, so doing it from the configuration space accessors (they are
protected by a spin lock) will trigger a warning.
To avoid the warning, use the ->add_bus() callback to perform the mapping
at enumeration time when the operation is allowed to sleep. Also add an
implementation of ->remove_bus() that undoes the mapping established by the
->add_bus() callback. While it isn't currently possible to unload the
module, there is work underway to remedy this, and this code will come in
handy when that happens.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Modify the Microblaze PCI subsystem to work with the generic
drivers/pci/host/pcie-xilinx.c driver on Microblaze and Zynq.
[bhelgaas: changelog]
Signed-off-by: Bharat Kumar Gogada <bharatku@xilinx.com>
Signed-off-by: Ravi Kiran Gummaluri <rgummal@xilinx.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
The Xilinx AXI PCIe Host Bridge Soft IP driver was previously only
supported on ARM (in particular, on ARCH_ZYNC), and pci_fixup_irqs() is
available there. But Microblaze will do IRQ fixup in pcibios_add_device(),
so pci_fixup_irqs() is not available on Microblaze.
Don't call pci_fixup_irqs() on Microblaze, so the driver can work on both
Zynq and Microblaze Architectures.
[bhelgaas: revise changelog to show similarity to bdb8a1844f ("PCI: iproc: Call pci_fixup_irqs() for ARM64 as well as ARM")]
Signed-off-by: Bharat Kumar Gogada <bharatku@xilinx.com>
Signed-off-by: Ravi Kiran Gummaluri <rgummal@xilinx.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Michal Simek <michal.simek@xilinx.com>
The Xilinx PCIe host controller driver uses pci_common_init_dev(), which
is ARM-specific and requires the ARM struct hw_pci. The part of
pci_common_init_dev() that is needed is limited and can be done here
without using hw_pci.
Create and scan the root bus directly without using the ARM
pci_common_init_dev() interface.
[bhelgaas: revise changelog to show similarity to 79953dd22c ("PCI: rcar: Remove dependency on ARM-specific struct hw_pci")]
Signed-off-by: Bharat Kumar Gogada <bharatku@xilinx.com>
Signed-off-by: Ravi Kiran Gummaluri <rgummal@xilinx.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Use the new of_pci_get_host_bridge_resources() API in place of the PCI OF
DT parser.
[bhelgaas: revise changelog to show similarity to 0021d22b73 ("PCI: designware: Use of_pci_get_host_bridge_resources() to parse DT")]
Signed-off-by: Bharat Kumar Gogada <bharatku@xilinx.com>
Signed-off-by: Ravi Kiran Gummaluri <rgummal@xilinx.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Michal Simek <michal.simek@xilinx.com>
The settings in GPR8 are dependent upon the particular layout of the
hardware platform. As such, they should be configurable via the device
tree.
Look up PHY Tx driver settings from the device tree. Fall back to the
original hard-coded values if they are not specified in the device tree.
Signed-off-by: Justin Waters <justin.waters@timesys.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Lucas Stach <l.stach@pengutronix.de>
Some kinds of Layerscape PCIe controllers will forward the received message
TLPs to system application address space, which could corrupt system memory
or lead to a system hang. Enable MSG_DROP to fix this issue.
Signed-off-by: Minghuan Lian <Minghuan.Lian@nxp.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Commit cbce790059 ("PCI: designware: Make driver arch-agnostic") changed
the host bridge sysdata pointer from the ARM pci_sys_data to the DesignWare
pcie_port structure, and changed pcie-designware.c to reflect that. But it
did not change the corresponding code in pci-keystone-dw.c, so it caused
crashes on Keystone:
Unable to handle kernel NULL pointer dereference at virtual address 00000030
pgd = c0003000
[00000030] *pgd=80000800004003, *pmd=00000000
Internal error: Oops: 206 [#1] PREEMPT SMP ARM
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.4.2-00139-gb74f926 #2
Hardware name: Keystone
PC is at ks_dw_pcie_msi_irq_unmask+0x24/0x58
Change pci-keystone-dw.c to expect sysdata to be the struct pcie_port
pointer.
[bhelgaas: changelog]
Fixes: cbce790059 ("PCI: designware: Make driver arch-agnostic")
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: stable@vger.kernel.org # v4.4+
CC: Zhou Wang <wangzhou1@hisilicon.com>
This driver uses PCI glue that is only available on 32-bit ARM. This used
to work fine as long as ARCH_MVEBU and ARCH_DOVE were exclusively 32-bit,
but there's a patch in the pipe to make ARCH_MVEBU also available on 64-bit
ARM.
[bhelgaas: changelog; patch is coming but not merged yet]
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add a new driver which exposes a root PCI bus whenever a PCI Express device
is passed through to a guest VM under Hyper-V. The device can be single-
or multi-function. The interrupts for the devices are managed by an IRQ
domain, implemented within the driver.
[bhelgaas: fold in race condition fix (http://lkml.kernel.org/r/1456340196-13717-1-git-send-email-jakeo@microsoft.com)]
Signed-off-by: Jake Oshins <jakeo@microsoft.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
The PCIe designware host driver is not used in system configurations
requiring the PCI_PROBE_ONLY flag to be set to prevent resources
assignment, therefore the driver code handling the flag can be removed
from the kernel.
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Pratyush Anand <pratyush.anand@gmail.com>
Acked-by: Jingoo Han Jingoo Han <jingoohan1@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Gabriele Paoloni <gabriele.paoloni@huawei.com>
Cc: Zhou Wang <wangzhou1@hisilicon.com>
Some platforms don't support ATU, e.g., pci-keystone.c. These platforms
use their own address translation component rather than ATU, and they
provide the rd_other_conf and wr_other_conf methods to program the
translation component and perform the access.
Add a comment to explain why we don't program the ATU for these platforms.
[bhelgaas: changelog]
Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
The Layerscape PCI host driver must recognize ls2085a compatible when using
firmware with ls2085a compatible property, otherwise the PCI bus won't be
detected even though ls2085a compatible is included by the dts.
Signed-off-by: Yang Shi <yang.shi@linaro.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
The PCIe rcar host driver is not used in system configurations requiring
the PCI_PROBE_ONLY flag to be set to prevent resources assignment,
therefore the driver code handling the flag can be removed from the kernel.
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Phil Edworthy <phil.edworthy@renesas.com>
Commit 943ebae781 ("PCI: iproc: Add PAXC interface support") only allowed
device 0, which is a regression on BCMA-based platforms.
All systems support only one device, a Root Port at 00:00.0, on the root
bus. PAXC-based systems support only the Root Port (00:00.0) and a single
device (with multiple functions) below it, e.g., 01:00.0, 01:00.1, etc.
Non-PAXC systems support arbitrary devices below the Root Port.
[bhelgaas: changelog, fold in removal of MAX_NUM_PAXC_PF check]
Fixes: 943ebae781 ("PCI: iproc: Add PAXC interface support")
Reported-by: Rafal Milecki <zajec5@gmail.com>
Signed-off-by: Ray Jui <rjui@broadcom.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
imx6_pcie_link_up() previously used usleep_range() to wait for the link to
come up. Since it may be called while holding the config spinlock, the
sleep causes a "BUG: scheduling while atomic" error.
Instead of waiting for the link to come up in imx6_pcie_link_up(), do the
waiting in imx6_pcie_wait_for_link(), where we're not holding a lock and
sleeping is allowed.
[bhelgaas: changelog, references to bugzilla and f95d3ae771]
Link: https://bugzilla.kernel.org/show_bug.cgi?id=100031
Fixes: f95d3ae771 ("PCI: imx6: Wait for retraining")
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Remove the remnants of the workaround for erratum ERR005184 which was never
completely implemented. The checks alone don't carry any value as we don't
act properly on the result.
A workaround should be added to the lane speed change in establish_link
later.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
This adds the PHY reset into a common error path of
imx6_pcie_establish_link(), deduplicating some of the debug prints. Also
reduce the severity of the "no-link" message in the one place where it is
expected to be hit when no peripheral is attached.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Move imx6_pcie_reset_phy() near the other PHY related functions in the
file. This is a cosmetic change, but also allows to do the following
changes without introducing needless forward declarations.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
* pci/trivial:
PCI: shpchp: Constify hpc_ops structure
PCI: Use kobj_to_dev() instead of open-coding it
PCI: Use to_pci_dev() instead of open-coding it
PCI: Fix all whitespace issues
PCI/MSI: Fix typos in <linux/msi.h>
For PCIe compliance, the PHY registers need setting as per the manual.
Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
If runtime PM is enabled in the kernel config, simply enable the clocks
once during probe.
Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Drivers based on the DesignWare core can override the config read accessors
by supplying rd_own_conf() and rd_other_conf() function pointers.
dw_pcie_rd_conf() calls dw_pcie_rd_own_conf() (for accesses to the root
bus) or dw_pcie_rd_other_conf():
dw_pcie_rd_conf
dw_pcie_rd_own_conf # if on root bus
dw_pcie_rd_other_conf # if not on root bus
Previously we checked for rd_other_conf() directly in dw_pcie_rd_conf(),
but we checked for rd_own_conf() in dw_pcie_rd_own_conf().
Check for rd_other_conf() in dw_pcie_rd_other_conf() to make this symmetric
with the rd_own_conf() checking, and similarly for the write path.
No functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Pratyush Anand <pratyush.anand@gmail.com>
The pci_sys_data struct was previously used by pci_common_init_dev() and by
the ARM pcibios_align_resource(), but recent commits removed those uses:
cbce790059 ("PCI: designware: Make driver arch-agnostic")
b3a72384fe ("ARM/PCI: Replace pci_sys_data->align_resource with global function pointer")
cbce790059 removed the use of pci_common_init_dev() by DesignWare
drivers, including pcie-rcar.c, and b3a72384fe removed the use of struct
pci_sys_data by the ARM pcibios_align_resource().
Remove struct pci_sys_data from pcie-rcar.c.
[bhelgaas: changelog]
Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Add support for the HiSilicon Hip06 SoC. Documentation has been updated to
include Hip06. Add Gabriele Paoloni as maintainer of the driver.
Signed-off-by: Gabriele Paoloni <gabriele.paoloni@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Fix all whitespace issues (missing or needed whitespace) in all files in
drivers/pci. Code is compiled with allyesconfig before and after code
changes and objects are recorded and checked with objdiff and they are not
changed after this commit.
Signed-off-by: Bogicevic Sasa <brutallesale@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Mark the dra7xx PCI host driver as broken. This driver was first merged in
v3.17 and has never worked. Although the driver compiles just fine, it is
missing an essential device reset. If the driver is included, the kernel
locks up hard shortly after booting, before any console output appears.
Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Add PCIe MSI support for both PAXB and PAXC interfaces on all iProc-based
platforms.
The iProc PCIe MSI support deploys an event queue-based implementation.
Each event queue is serviced by a GIC interrupt and can support up to 64
MSI vectors. Host memory is allocated for the event queues, and each event
queue consists of 64 word-sized entries. MSI data is written to the lower
16-bit of each entry, whereas the upper 16-bit of the entry is reserved for
the controller for internal processing.
Each event queue is tracked by a head pointer and tail pointer. Head
pointer indicates the next entry in the event queue to be processed by
the driver and is updated by the driver after processing is done.
The controller uses the tail pointer as the next MSI data insertion
point. The controller ensures MSI data is flushed to host memory before
updating the tail pointer and then triggering the interrupt.
MSI IRQ affinity is supported by evenly distributing the interrupts to each
CPU core. MSI vector is moved from one GIC interrupt to another in order
to steer to the target CPU.
Therefore, the actual number of supported MSI vectors is:
M * 64 / N
where M denotes the number of GIC interrupts (event queues), and N denotes
the number of CPU cores.
This iProc event queue-based MSI support should not be used with newer
platforms with integrated MSI support in the GIC (e.g., giv2m or
gicv3-its).
[bhelgaas: fold in Kconfig fixes from Arnd Bergmann <arnd@arndb.de>]
Signed-off-by: Ray Jui <rjui@broadcom.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Anup Patel <anup.patel@broadcom.com>
Reviewed-by: Vikram Prakash <vikramp@broadcom.com>
Reviewed-by: Scott Branden <sbranden@broadcom.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
On -RT and if kernel is booting with "threadirqs" cmd line parameter,
PCIe/PCI (MSI) IRQ cascade handlers (like dra7xx_pcie_msi_irq_handler())
will be forced threaded and, as result, will generate warnings like this:
WARNING: CPU: 1 PID: 82 at kernel/irq/handle.c:150 handle_irq_event_percpu+0x14c/0x174()
irq 460 handler irq_default_primary_handler+0x0/0x14 enabled interrupts
Backtrace:
(warn_slowpath_common) from (warn_slowpath_fmt+0x38/0x40)
(warn_slowpath_fmt) from (handle_irq_event_percpu+0x14c/0x174)
(handle_irq_event_percpu) from (handle_irq_event+0x84/0xb8)
(handle_irq_event) from (handle_simple_irq+0x90/0x118)
(handle_simple_irq) from (generic_handle_irq+0x30/0x44)
(generic_handle_irq) from (dra7xx_pcie_msi_irq_handler+0x7c/0x8c)
(dra7xx_pcie_msi_irq_handler) from (irq_forced_thread_fn+0x28/0x5c)
(irq_forced_thread_fn) from (irq_thread+0x128/0x204)
This happens because all of them invoke generic_handle_irq() from the
requested handler. generic_handle_irq() grabs raw_locks and thus needs to
run in raw-IRQ context.
This issue was originally reproduced on TI dra7-evem, but, as was
identified during discussion [1], other hosts can also suffer from this
issue. Fix all them at once by marking PCIe/PCI (MSI) IRQ cascade handlers
IRQF_NO_THREAD explicitly.
[1] http://lkml.kernel.org/r/1448027966-21610-1-git-send-email-grygorii.strashko@ti.com
[bhelgaas: add stable tag, fix typos]
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Lucas Stach <l.stach@pengutronix.de> (for imx6)
CC: stable@vger.kernel.org
CC: Kishon Vijay Abraham I <kishon@ti.com>
CC: Jingoo Han <jingoohan1@gmail.com>
CC: Kukjin Kim <kgene@kernel.org>
CC: Krzysztof Kozlowski <k.kozlowski@samsung.com>
CC: Richard Zhu <Richard.Zhu@freescale.com>
CC: Thierry Reding <thierry.reding@gmail.com>
CC: Stephen Warren <swarren@wwwdotorg.org>
CC: Alexandre Courbot <gnurou@gmail.com>
CC: Simon Horman <horms@verge.net.au>
CC: Pratyush Anand <pratyush.anand@gmail.com>
CC: Michal Simek <michal.simek@xilinx.com>
CC: "Sören Brinkmann" <soren.brinkmann@xilinx.com>
CC: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Return values immediately when possible to simplify the control flow.
No functional change intended. Folded in unused variable removal as
pointed out by Fabio Estevam <fabio.estevam@nxp.com>, Arnd Bergmann
<arnd@arndb.de>, and Thierry Reding <thierry.reding@gmail.com>.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Pratyush Anand <pratyush.anand@gmail.com>
The PCIe driver reuses the Designware common code for host and MSI
initialization, and also programs the Qualcomm application specific
registers.
[bhelgaas: remove COMPILE_TEST Kconfig dependency]
Signed-off-by: Stanimir Varbanov <svarbanov@mm-sol.com>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Read back the ATU CR2 register to ensure ATU programming is effective
before any subsequent I/O or config space accesses.
Without this, PCI device enumeration is unreliable.
[bhelgaas: changelog, comment]
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Pratyush Anand <pratyush.anand@gmail.com>
Add fallback compatibility string for R-Car Gen 2 family. This is in
keeping with the fallback scheme being adopted wherever appropriate for
drivers for Renesas SoCs.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Add fallback compatibility string for R-Car Gen 2 family. This is in
keeping with the fallback scheme being adopted wherever appropriate for
drivers for Renesas SoCs.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Rob Herring <robh@kernel.org>
Add the "renesas,pcie-r8a7795" property for the R-Car H3 device to the
pcie-rcar driver.
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Harunobu Kurokawa <harunobu.kurokawa.dn@renesas.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Now that we can build on arm64, revert commit 7c537c67d2
("PCI: rcar: Build pcie-rcar.c only on ARM").
Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
The main purpose of this change is to avoid calling pci_ioremap_io() as
this is not available on arm64. However, instead of doing the range
parsing in this driver we can utilise of_pci_get_host_bridge_resources().
This is similar to changes made to the generic PCI host driver in commit
dbf9826d57 ("PCI: generic: Convert to DT resource parsing API")
Reported-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Traditionally, all iProc PCIe root complexes use PAXB-based wrapper, with
an integrated on-chip Serdes to support external endpoint devices. On
newer iProc platforms, a PAXC-based wrapper is introduced, for connection
with internally emulated PCIe endpoint devices in the ASIC.
Add support for PAXC-based iProc PCIe root complex in the iProc PCIe core
driver. This change factors out common logic between PAXB and PAXC, and
uses tables to store register offsets that are different between PAXB and
PAXC. This allows the driver to be scaled to support subsequent PAXC
revisions in the future.
Signed-off-by: Ray Jui <rjui@broadcom.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Scott Branden <sbranden@broadcom.com>
For 32-bit config reads (size == 4), hisi_pcie_cfg_read() returned success
but never filled in the data we read.
Return the register data for 32-bit config reads.
Without this fix, PCI doesn't work at all because enumeration depends on
32-bit config reads. The driver was tested internally, but got broken in
the process of upstreaming, so this fixes the breakage.
Fixes: 500a1d9a43 ("PCI: hisi: Add HiSilicon SoC Hip05 PCIe driver")
Signed-off-by: Dongdong Liu <liudongdong3@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
PCI interrupt lines start at 1, not at 0. So, creates additional one
interrupt when register for irq domain.
Error when PCIe devices have 4 INTx:
WARNING: CPU: 1 PID: 1 at kernel/irq/irqdomain.c:280
irq_domain_associate+0x17c/0x1cc()
error: hwirq 0x4 is too large for dummy
Tested on Ethernet adapter card with multi-functions.
Signed-off-by: Ley Foon Tan <lftan@altera.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Check TLP packet successful completion status. This fix the issue when
accessing multi-function devices in enumeration process, TLP will return
error when accessing non-exist function number. Returns PCI error code
instead of generic errno.
Tested on Ethernet adapter card with multi-functions.
[bhelgaas: simplify completion status checking code]
Signed-off-by: Ley Foon Tan <lftan@altera.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
