Move allocation of VMX and SVM vcpus to common x86. Although the struct
being allocated is technically a VMX/SVM struct, it can be interpreted
directly as a 'struct kvm_vcpu' because of the pre-existing requirement
that 'struct kvm_vcpu' be located at offset zero of the arch/vendor vcpu
struct.
Remove the message from the build-time assertions regarding placement of
the struct, as compatibility with the arch usercopy region is no longer
the sole dependent on 'struct kvm_vcpu' being at offset zero.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Free the vCPU's wbinvd_dirty_mask if vCPU creation fails after
kvm_arch_vcpu_init(), e.g. when installing the vCPU's file descriptor.
Do the freeing by calling kvm_arch_vcpu_free() instead of open coding
the freeing. This adds a likely superfluous, but ultimately harmless,
call to kvmclock_reset(), which only clears vcpu->arch.pv_time_enabled.
Using kvm_arch_vcpu_free() allows for additional cleanup in the future.
Fixes: f5f48ee15c ("KVM: VMX: Execute WBINVD to keep data consistency with assigned devices")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If the guest is configured to have SPEC_CTRL but the host does not
(which is a nonsensical configuration but these are not explicitly
forbidden) then a host-initiated MSR write can write vmx->spec_ctrl
(respectively svm->spec_ctrl) and trigger a #GP when KVM tries to
restore the host value of the MSR. Add a more comprehensive check
for valid bits of SPEC_CTRL, covering host CPUID flags and,
since we are at it and it is more correct that way, guest CPUID
flags too.
For AMD, remove the unnecessary is_guest_mode check around setting
the MSR interception bitmap, so that the code looks the same as
for Intel.
Cc: Jim Mattson <jmattson@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Even if it's read-only, it can still be written to by userspace. Let
them know by adding it to KVM_GET_MSR_INDEX_LIST.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rename bit() to __feature_bit() to give it a more descriptive name, and
add a macro, feature_bit(), to stuff the X68_FEATURE_ prefix to keep
line lengths manageable for code that hardcodes the bit to be retrieved.
No functional change intended.
Cc: Jim Mattson <jmattson@google.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add feature-specific helpers for querying guest CPUID support from the
emulator instead of having the emulator do a full CPUID and perform its
own bit tests. The primary motivation is to eliminate the emulator's
usage of bit() so that future patches can add more extensive build-time
assertions on the usage of bit() without having to expose yet more code
to the emulator.
Note, providing a generic guest_cpuid_has() to the emulator doesn't work
due to the existing built-time assertions in guest_cpuid_has(), which
require the feature being checked to be a compile-time constant.
No functional change intended.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a helper macro to generate the set of reserved cr4 bits for both
host and guest to ensure that adding a check on guest capabilities is
also added for host capabilities, and vice versa.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Check the current CPU's reserved cr4 bits against the mask calculated
for the boot CPU to ensure consistent behavior across all CPUs.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Calculate the host-reserved cr4 bits at runtime based on the system's
capabilities (using logic similar to __do_cpuid_func()), and use the
dynamically generated mask for the reserved bit check in kvm_set_cr4()
instead using of the static CR4_RESERVED_BITS define. This prevents
userspace from "enabling" features in cr4 that are not supported by the
system, e.g. by ignoring KVM_GET_SUPPORTED_CPUID and specifying a bogus
CPUID for the vCPU.
Allowing userspace to set unsupported bits in cr4 can lead to a variety
of undesirable behavior, e.g. failed VM-Enter, and in general increases
KVM's attack surface. A crafty userspace can even abuse CR4.LA57 to
induce an unchecked #GP on a WRMSR.
On a platform without LA57 support:
KVM_SET_CPUID2 // CPUID_7_0_ECX.LA57 = 1
KVM_SET_SREGS // CR4.LA57 = 1
KVM_SET_MSRS // KERNEL_GS_BASE = 0x0004000000000000
KVM_RUN
leads to a #GP when writing KERNEL_GS_BASE into hardware:
unchecked MSR access error: WRMSR to 0xc0000102 (tried to write 0x0004000000000000)
at rIP: 0xffffffffa00f239a (vmx_prepare_switch_to_guest+0x10a/0x1d0 [kvm_intel])
Call Trace:
kvm_arch_vcpu_ioctl_run+0x671/0x1c70 [kvm]
kvm_vcpu_ioctl+0x36b/0x5d0 [kvm]
do_vfs_ioctl+0xa1/0x620
ksys_ioctl+0x66/0x70
__x64_sys_ioctl+0x16/0x20
do_syscall_64+0x4c/0x170
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7fc08133bf47
Note, the above sequence fails VM-Enter due to invalid guest state.
Userspace can allow VM-Enter to succeed (after the WRMSR #GP) by adding
a KVM_SET_SREGS w/ CR4.LA57=0 after KVM_SET_MSRS, in which case KVM will
technically leak the host's KERNEL_GS_BASE into the guest. But, as
KERNEL_GS_BASE is a userspace-defined value/address, the leak is largely
benign as a malicious userspace would simply be exposing its own data to
the guest, and attacking a benevolent userspace would require multiple
bugs in the userspace VMM.
Cc: stable@vger.kernel.org
Cc: Jun Nakajima <jun.nakajima@intel.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
check kvm_pit outside kvm_vm_ioctl_reinject() to keep codestyle consistent
with other kvm_pit func and prepare for futher cleanups.
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
ICR and TSCDEADLINE MSRs write cause the main MSRs write vmexits in our
product observation, multicast IPIs are not as common as unicast IPI like
RESCHEDULE_VECTOR and CALL_FUNCTION_SINGLE_VECTOR etc.
This patch introduce a mechanism to handle certain performance-critical
WRMSRs in a very early stage of KVM VMExit handler.
This mechanism is specifically used for accelerating writes to x2APIC ICR
that attempt to send a virtual IPI with physical destination-mode, fixed
delivery-mode and single target. Which was found as one of the main causes
of VMExits for Linux workloads.
The reason this mechanism significantly reduce the latency of such virtual
IPIs is by sending the physical IPI to the target vCPU in a very early stage
of KVM VMExit handler, before host interrupts are enabled and before expensive
operations such as reacquiring KVM’s SRCU lock.
Latency is reduced even more when KVM is able to use APICv posted-interrupt
mechanism (which allows to deliver the virtual IPI directly to target vCPU
without the need to kick it to host).
Testing on Xeon Skylake server:
The virtual IPI latency from sender send to receiver receive reduces
more than 200+ cpu cycles.
Reviewed-by: Liran Alon <liran.alon@oracle.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Sean Christopherson <sean.j.christopherson@intel.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Liran Alon <liran.alon@oracle.com>
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert a plethora of parameters and variables in the MMU and page fault
flows from type gva_t to gpa_t to properly handle TDP on 32-bit KVM.
Thanks to PSE and PAE paging, 32-bit kernels can access 64-bit physical
addresses. When TDP is enabled, the fault address is a guest physical
address and thus can be a 64-bit value, even when both KVM and its guest
are using 32-bit virtual addressing, e.g. VMX's VMCS.GUEST_PHYSICAL is a
64-bit field, not a natural width field.
Using a gva_t for the fault address means KVM will incorrectly drop the
upper 32-bits of the GPA. Ditto for gva_to_gpa() when it is used to
translate L2 GPAs to L1 GPAs.
Opportunistically rename variables and parameters to better reflect the
dual address modes, e.g. use "cr2_or_gpa" for fault addresses and plain
"addr" instead of "vaddr" when the address may be either a GVA or an L2
GPA. Similarly, use "gpa" in the nonpaging_page_fault() flows to avoid
a confusing "gpa_t gva" declaration; this also sets the stage for a
future patch to combing nonpaging_page_fault() and tdp_page_fault() with
minimal churn.
Sprinkle in a few comments to document flows where an address is known
to be a GVA and thus can be safely truncated to a 32-bit value. Add
WARNs in kvm_handle_page_fault() and FNAME(gva_to_gpa_nested)() to help
document such cases and detect bugs.
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
WARN once in kvm_load_guest_fpu() if TIF_NEED_FPU_LOAD is observed, as
that would mean that KVM is corrupting userspace's FPU by saving
unknown register state into arch.user_fpu. Add a comment to explain
why KVM WARNs on TIF_NEED_FPU_LOAD instead of implementing logic
similar to fpu__copy().
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Unlike most state managed by XSAVE, MPX is initialized to zero on INIT.
Because INITs are usually recognized in the context of a VCPU_RUN call,
kvm_vcpu_reset() puts the guest's FPU so that the FPU state is resident
in memory, zeros the MPX state, and reloads FPU state to hardware. But,
in the unlikely event that an INIT is recognized during
kvm_arch_vcpu_ioctl_get_mpstate() via kvm_apic_accept_events(),
kvm_vcpu_reset() will call kvm_put_guest_fpu() without a preceding
kvm_load_guest_fpu() and corrupt the guest's FPU state (and possibly
userspace's FPU state as well).
Given that MPX is being removed from the kernel[*], fix the bug with the
simple-but-ugly approach of loading the guest's FPU during
KVM_GET_MP_STATE.
[*] See commit f240652b60 ("x86/mpx: Remove MPX APIs").
Fixes: f775b13eed ("x86,kvm: move qemu/guest FPU switching out to vcpu_run")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Change the last users of "shorthand = 0" to use APIC_DEST_NOSHORT.
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We were using either APIC_DEST_PHYSICAL|APIC_DEST_LOGICAL or 0|1 to
fill in kvm_lapic_irq.dest_mode. It's fine only because in most cases
when we check against dest_mode it's against APIC_DEST_PHYSICAL (which
equals to 0). However, that's not consistent. We'll have problem
when we want to start checking against APIC_DEST_LOGICAL, which does
not equals to 1.
This patch firstly introduces kvm_lapic_irq_dest_mode() helper to take
any boolean of destination mode and return the APIC_DEST_* macro.
Then, it replaces the 0|1 settings of irq.dest_mode with the helper.
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Pull perf updates from Ingo Molnar:
"The main kernel side changes in this cycle were:
- Various Intel-PT updates and optimizations (Alexander Shishkin)
- Prohibit kprobes on Xen/KVM emulate prefixes (Masami Hiramatsu)
- Add support for LSM and SELinux checks to control access to the
perf syscall (Joel Fernandes)
- Misc other changes, optimizations, fixes and cleanups - see the
shortlog for details.
There were numerous tooling changes as well - 254 non-merge commits.
Here are the main changes - too many to list in detail:
- Enhancements to core tooling infrastructure, perf.data, libperf,
libtraceevent, event parsing, vendor events, Intel PT, callchains,
BPF support and instruction decoding.
- There were updates to the following tools:
perf annotate
perf diff
perf inject
perf kvm
perf list
perf maps
perf parse
perf probe
perf record
perf report
perf script
perf stat
perf test
perf trace
- And a lot of other changes: please see the shortlog and Git log for
more details"
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (279 commits)
perf parse: Fix potential memory leak when handling tracepoint errors
perf probe: Fix spelling mistake "addrees" -> "address"
libtraceevent: Fix memory leakage in copy_filter_type
libtraceevent: Fix header installation
perf intel-bts: Does not support AUX area sampling
perf intel-pt: Add support for decoding AUX area samples
perf intel-pt: Add support for recording AUX area samples
perf pmu: When using default config, record which bits of config were changed by the user
perf auxtrace: Add support for queuing AUX area samples
perf session: Add facility to peek at all events
perf auxtrace: Add support for dumping AUX area samples
perf inject: Cut AUX area samples
perf record: Add aux-sample-size config term
perf record: Add support for AUX area sampling
perf auxtrace: Add support for AUX area sample recording
perf auxtrace: Move perf_evsel__find_pmu()
perf record: Add a function to test for kernel support for AUX area sampling
perf tools: Add kernel AUX area sampling definitions
perf/core: Make the mlock accounting simple again
perf report: Jump to symbol source view from total cycles view
...
Acquire kvm->srcu for the duration of ->set_nested_state() to fix a bug
where nVMX derefences ->memslots without holding ->srcu or ->slots_lock.
The other half of nested migration, ->get_nested_state(), does not need
to acquire ->srcu as it is a purely a dump of internal KVM (and CPU)
state to userspace.
Detected as an RCU lockdep splat that is 100% reproducible by running
KVM's state_test selftest with CONFIG_PROVE_LOCKING=y. Note that the
failing function, kvm_is_visible_gfn(), is only checking the validity of
a gfn, it's not actually accessing guest memory (which is more or less
unsupported during vmx_set_nested_state() due to incorrect MMU state),
i.e. vmx_set_nested_state() itself isn't fundamentally broken. In any
case, setting nested state isn't a fast path so there's no reason to go
out of our way to avoid taking ->srcu.
=============================
WARNING: suspicious RCU usage
5.4.0-rc7+ #94 Not tainted
-----------------------------
include/linux/kvm_host.h:626 suspicious rcu_dereference_check() usage!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
1 lock held by evmcs_test/10939:
#0: ffff88826ffcb800 (&vcpu->mutex){+.+.}, at: kvm_vcpu_ioctl+0x85/0x630 [kvm]
stack backtrace:
CPU: 1 PID: 10939 Comm: evmcs_test Not tainted 5.4.0-rc7+ #94
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
Call Trace:
dump_stack+0x68/0x9b
kvm_is_visible_gfn+0x179/0x180 [kvm]
mmu_check_root+0x11/0x30 [kvm]
fast_cr3_switch+0x40/0x120 [kvm]
kvm_mmu_new_cr3+0x34/0x60 [kvm]
nested_vmx_load_cr3+0xbd/0x1f0 [kvm_intel]
nested_vmx_enter_non_root_mode+0xab8/0x1d60 [kvm_intel]
vmx_set_nested_state+0x256/0x340 [kvm_intel]
kvm_arch_vcpu_ioctl+0x491/0x11a0 [kvm]
kvm_vcpu_ioctl+0xde/0x630 [kvm]
do_vfs_ioctl+0xa2/0x6c0
ksys_ioctl+0x66/0x70
__x64_sys_ioctl+0x16/0x20
do_syscall_64+0x54/0x200
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x7f59a2b95f47
Fixes: 8fcc4b5923 ("kvm: nVMX: Introduce KVM_CAP_NESTED_STATE")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fold shared_msr_update() into its sole user to eliminate its pointless
bounds check, its godawful printk, its misleading comment (it's called
under a global lock), and its woefully inaccurate name.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
A recent change inadvertently exported a static function, which results
in modpost throwing a warning. Fix it.
Fixes: cbbaa2727a ("KVM: x86: fix presentation of TSX feature in ARCH_CAPABILITIES")
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fixes gcc '-Wunused-but-set-variable' warning:
arch/x86/kvm/x86.c: In function kvm_make_scan_ioapic_request_mask:
arch/x86/kvm/x86.c:7911:7: warning: variable called set but not
used [-Wunused-but-set-variable]
It is not used since commit 7ee30bc132 ("KVM: x86: deliver KVM
IOAPIC scan request to target vCPUs")
Signed-off-by: Mao Wenan <maowenan@huawei.com>
Fixes: 7ee30bc132 ("KVM: x86: deliver KVM IOAPIC scan request to target vCPUs")
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The current guest mitigation of TAA is both too heavy and not really
sufficient. It is too heavy because it will cause some affected CPUs
(those that have MDS_NO but lack TAA_NO) to fall back to VERW and
get the corresponding slowdown. It is not really sufficient because
it will cause the MDS_NO bit to disappear upon microcode update, so
that VMs started before the microcode update will not be runnable
anymore afterwards, even with tsx=on.
Instead, if tsx=on on the host, we can emulate MSR_IA32_TSX_CTRL for
the guest and let it run without the VERW mitigation. Even though
MSR_IA32_TSX_CTRL is quite heavyweight, and we do not want to write
it on every vmentry, we can use the shared MSR functionality because
the host kernel need not protect itself from TSX-based side-channels.
Tested-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Because KVM always emulates CPUID, the CPUID clear bit
(bit 1) of MSR_IA32_TSX_CTRL must be emulated "manually"
by the hypervisor when performing said emulation.
Right now neither kvm-intel.ko nor kvm-amd.ko implement
MSR_IA32_TSX_CTRL but this will change in the next patch.
Reviewed-by: Jim Mattson <jmattson@google.com>
Tested-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
"Shared MSRs" are guest MSRs that are written to the host MSRs but
keep their value until the next return to userspace. They support
a mask, so that some bits keep the host value, but this mask is
only used to skip an unnecessary MSR write and the value written
to the MSR is always the guest MSR.
Fix this and, while at it, do not update smsr->values[slot].curr if
for whatever reason the wrmsr fails. This should only happen due to
reserved bits, so the value written to smsr->values[slot].curr
will not match when the user-return notifier and the host value will
always be restored. However, it is untidy and in rare cases this
can actually avoid spurious WRMSRs on return to userspace.
Cc: stable@vger.kernel.org
Reviewed-by: Jim Mattson <jmattson@google.com>
Tested-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM does not implement MSR_IA32_TSX_CTRL, so it must not be presented
to the guests. It is also confusing to have !ARCH_CAP_TSX_CTRL_MSR &&
!RTM && ARCH_CAP_TAA_NO: lack of MSR_IA32_TSX_CTRL suggests TSX was not
hidden (it actually was), yet the value says that TSX is not vulnerable
to microarchitectural data sampling. Fix both.
Cc: stable@vger.kernel.org
Tested-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The function is only used in kvm.ko module.
Reviewed-by: Mark Kanda <mark.kanda@oracle.com>
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In IOAPIC fixed delivery mode instead of flushing the scan
requests to all vCPUs, we should only send the requests to
vCPUs specified within the destination field.
This patch introduces kvm_get_dest_vcpus_mask() API which
retrieves an array of target vCPUs by using
kvm_apic_map_get_dest_lapic() and then based on the
vcpus_idx, it sets the bit in a bitmap. However, if the above
fails kvm_get_dest_vcpus_mask() finds the target vCPUs by
traversing all available vCPUs. Followed by setting the
bits in the bitmap.
If we had different vCPUs in the previous request for the
same redirection table entry then bits corresponding to
these vCPUs are also set. This to done to keep
ioapic_handled_vectors synchronized.
This bitmap is then eventually passed on to
kvm_make_vcpus_request_mask() to generate a masked request
only for the target vCPUs.
This would enable us to reduce the latency overhead on isolated
vCPUs caused by the IPI to process due to KVM_REQ_IOAPIC_SCAN.
Suggested-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Nitesh Narayan Lal <nitesh@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently, a host perf_event is created for a vPMC functionality emulation.
It’s unpredictable to determine if a disabled perf_event will be reused.
If they are disabled and are not reused for a considerable period of time,
those obsolete perf_events would increase host context switch overhead that
could have been avoided.
If the guest doesn't WRMSR any of the vPMC's MSRs during an entire vcpu
sched time slice, and its independent enable bit of the vPMC isn't set,
we can predict that the guest has finished the use of this vPMC, and then
do request KVM_REQ_PMU in kvm_arch_sched_in and release those perf_events
in the first call of kvm_pmu_handle_event() after the vcpu is scheduled in.
This lazy mechanism delays the event release time to the beginning of the
next scheduled time slice if vPMC's MSRs aren't changed during this time
slice. If guest comes back to use this vPMC in next time slice, a new perf
event would be re-created via perf_event_create_kernel_counter() as usual.
Suggested-by: Wei Wang <wei.w.wang@intel.com>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Like Xu <like.xu@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The leagcy pmu_ops->msr_idx_to_pmc is only called in kvm_pmu_rdpmc, so
this function actually receives the contents of ECX before RDPMC, and
translates it to a kvm_pmc. Let's clarify its semantic by renaming the
existing msr_idx_to_pmc to rdpmc_ecx_to_pmc, and is_valid_msr_idx to
is_valid_rdpmc_ecx; likewise for the wrapper kvm_pmu_is_valid_msr_idx.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Like Xu <like.xu@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit 4b9852f4f3 ("KVM: x86: Fix INIT signal handling in various CPU states")
fixed KVM to also latch pending LAPIC INIT event when vCPU is in VMX
operation.
However, current API of KVM_SET_MP_STATE allows userspace to put vCPU
into KVM_MP_STATE_SIPI_RECEIVED or KVM_MP_STATE_INIT_RECEIVED even when
vCPU is in VMX operation.
Fix this by introducing a util method to check if vCPU state latch INIT
signals and use it in KVM_SET_MP_STATE handler.
Fixes: 4b9852f4f3 ("KVM: x86: Fix INIT signal handling in various CPU states")
Reported-by: Sean Christopherson <sean.j.christopherson@intel.com>
Reviewed-by: Mihai Carabas <mihai.carabas@oracle.com>
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit 4b9852f4f3 ("KVM: x86: Fix INIT signal handling in various CPU states")
fixed KVM to also latch pending LAPIC INIT event when vCPU is in VMX
operation.
However, current API of KVM_SET_VCPU_EVENTS defines this field as
part of SMM state and only set pending LAPIC INIT event if vCPU is
specified to be in SMM mode (events->smi.smm is set).
Change KVM_SET_VCPU_EVENTS handler to set pending LAPIC INIT event
by latched_init field regardless of if vCPU is in SMM mode or not.
Fixes: 4b9852f4f3 ("KVM: x86: Fix INIT signal handling in various CPU states")
Reviewed-by: Mihai Carabas <mihai.carabas@oracle.com>
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When applying commit 7a5ee6edb4 ("KVM: X86: Fix initialization of MSR
lists"), it forgot to reset the three MSR lists number varialbes to 0
while removing the useless conditionals.
Fixes: 7a5ee6edb4 (KVM: X86: Fix initialization of MSR lists)
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
VT-d posted interrupts, DAX/ZONE_DEVICE,
module unload/reload.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJdyrEsAAoJEL/70l94x66DIOkH/Asqrh4o4pwfRHWE+9rnM6PI
j8oFi7Q4eRXJnP4zEMnMbb6xD/BfSH1tWEcPcYgIxD/t0DFx8F92/xsETAJ/Qc5n
CWpmnhMkJqERlV+GSRuBqnheMo0CEH1Ab1QZKhh5U3//pK3OtGY9WyydJHWcquTh
bGh2pnxwVZOtIIEmclUUfKjyR2Fu8hJLnQwzWgYZ27UK7J2pLmiiTX0vwQG359Iq
sDn9ND33pCBW5e/D2mzccRjOJEvzwrumewM1sRDsoAYLJzUjg9+xD83vZDa1d7R6
gajCDFWVJbPoLvUY+DgsZBwMMlogElimJMT/Zft3ERbCsYJbFvcmwp4JzyxDxQ4=
=J6KN
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"Fix unwinding of KVM_CREATE_VM failure, VT-d posted interrupts,
DAX/ZONE_DEVICE, and module unload/reload"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: MMU: Do not treat ZONE_DEVICE pages as being reserved
KVM: VMX: Introduce pi_is_pir_empty() helper
KVM: VMX: Do not change PID.NDST when loading a blocked vCPU
KVM: VMX: Consider PID.PIR to determine if vCPU has pending interrupts
KVM: VMX: Fix comment to specify PID.ON instead of PIR.ON
KVM: X86: Fix initialization of MSR lists
KVM: fix placement of refcount initialization
KVM: Fix NULL-ptr deref after kvm_create_vm fails
The three MSR lists(msrs_to_save[], emulated_msrs[] and
msr_based_features[]) are global arrays of kvm.ko, which are
adjusted (copy supported MSRs forward to override the unsupported MSRs)
when insmod kvm-{intel,amd}.ko, but it doesn't reset these three arrays
to their initial value when rmmod kvm-{intel,amd}.ko. Thus, at the next
installation, kvm-{intel,amd}.ko will do operations on the modified
arrays with some MSRs lost and some MSRs duplicated.
So define three constant arrays to hold the initial MSR lists and
initialize msrs_to_save[], emulated_msrs[] and msr_based_features[]
based on the constant arrays.
Cc: stable@vger.kernel.org
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Signed-off-by: Chenyi Qiang <chenyi.qiang@intel.com>
[Remove now useless conditionals. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The odd out jump label is really not needed. Get rid of
it by return true directly while r < 0 as suggested by
Paolo. This further lead to var changed being unused.
Remove it too.
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The page table pages corresponding to broken down large pages are zapped in
FIFO order, so that the large page can potentially be recovered, if it is
not longer being used for execution. This removes the performance penalty
for walking deeper EPT page tables.
By default, one large page will last about one hour once the guest
reaches a steady state.
Signed-off-by: Junaid Shahid <junaids@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
With some Intel processors, putting the same virtual address in the TLB
as both a 4 KiB and 2 MiB page can confuse the instruction fetch unit
and cause the processor to issue a machine check resulting in a CPU lockup.
Unfortunately when EPT page tables use huge pages, it is possible for a
malicious guest to cause this situation.
Add a knob to mark huge pages as non-executable. When the nx_huge_pages
parameter is enabled (and we are using EPT), all huge pages are marked as
NX. If the guest attempts to execute in one of those pages, the page is
broken down into 4K pages, which are then marked executable.
This is not an issue for shadow paging (except nested EPT), because then
the host is in control of TLB flushes and the problematic situation cannot
happen. With nested EPT, again the nested guest can cause problems shadow
and direct EPT is treated in the same way.
[ tglx: Fixup default to auto and massage wording a bit ]
Originally-by: Junaid Shahid <junaids@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Commit 0bc48bea36 ("KVM: x86: update master clock before computing
kvmclock_offset")
switches the order of operations to avoid the conversion
TSC (without frequency correction) ->
system_timestamp (with frequency correction),
which might cause a time jump.
However, it leaves any other masterclock update unsafe, which includes,
at the moment:
* HV_X64_MSR_REFERENCE_TSC MSR write.
* TSC writes.
* Host suspend/resume.
Avoid the time jump issue by using frequency uncorrected
CLOCK_MONOTONIC_RAW clock.
Its the guests time keeping software responsability
to track and correct a reference clock such as UTC.
This fixes forward time jump (which can result in
failure to bring up a vCPU) during vCPU hotplug:
Oct 11 14:48:33 storage kernel: CPU2 has been hot-added
Oct 11 14:48:34 storage kernel: CPU3 has been hot-added
Oct 11 14:49:22 storage kernel: smpboot: Booting Node 0 Processor 2 APIC 0x2 <-- time jump of almost 1 minute
Oct 11 14:49:22 storage kernel: smpboot: do_boot_cpu failed(-1) to wakeup CPU#2
Oct 11 14:49:23 storage kernel: smpboot: Booting Node 0 Processor 3 APIC 0x3
Oct 11 14:49:23 storage kernel: kvm-clock: cpu 3, msr 0:7ff640c1, secondary cpu clock
Which happens because:
/*
* Wait 10s total for a response from AP
*/
boot_error = -1;
timeout = jiffies + 10*HZ;
while (time_before(jiffies, timeout)) {
...
}
Analyzed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Export the IA32_ARCH_CAPABILITIES MSR bit MDS_NO=0 to guests on TSX
Async Abort(TAA) affected hosts that have TSX enabled and updated
microcode. This is required so that the guests don't complain,
"Vulnerable: Clear CPU buffers attempted, no microcode"
when the host has the updated microcode to clear CPU buffers.
Microcode update also adds support for MSR_IA32_TSX_CTRL which is
enumerated by the ARCH_CAP_TSX_CTRL bit in IA32_ARCH_CAPABILITIES MSR.
Guests can't do this check themselves when the ARCH_CAP_TSX_CTRL bit is
not exported to the guests.
In this case export MDS_NO=0 to the guests. When guests have
CPUID.MD_CLEAR=1, they deploy MDS mitigation which also mitigates TAA.
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Neelima Krishnan <neelima.krishnan@intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com>
If the "virtualize APIC accesses" VM-execution control is set in the
VMCS, the APIC virtualization hardware is triggered when a page walk
in VMX non-root mode terminates at a PTE wherein the address of the 4k
page frame matches the APIC-access address specified in the VMCS. On
hardware, the APIC-access address may be any valid 4k-aligned physical
address.
KVM's nVMX implementation enforces the additional constraint that the
APIC-access address specified in the vmcs12 must be backed by
a "struct page" in L1. If not, L0 will simply clear the "virtualize
APIC accesses" VM-execution control in the vmcs02.
The problem with this approach is that the L1 guest has arranged the
vmcs12 EPT tables--or shadow page tables, if the "enable EPT"
VM-execution control is clear in the vmcs12--so that the L2 guest
physical address(es)--or L2 guest linear address(es)--that reference
the L2 APIC map to the APIC-access address specified in the
vmcs12. Without the "virtualize APIC accesses" VM-execution control in
the vmcs02, the APIC accesses in the L2 guest will directly access the
APIC-access page in L1.
When there is no mapping whatsoever for the APIC-access address in L1,
the L2 VM just loses the intended APIC virtualization. However, when
the APIC-access address is mapped to an MMIO region in L1, the L2
guest gets direct access to the L1 MMIO device. For example, if the
APIC-access address specified in the vmcs12 is 0xfee00000, then L2
gets direct access to L1's APIC.
Since this vmcs12 configuration is something that KVM cannot
faithfully emulate, the appropriate response is to exit to userspace
with KVM_INTERNAL_ERROR_EMULATION.
Fixes: fe3ef05c75 ("KVM: nVMX: Prepare vmcs02 from vmcs01 and vmcs12")
Reported-by: Dan Cross <dcross@google.com>
Signed-off-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Peter Shier <pshier@google.com>
Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Hoist support for RDMSR/WRMSR of IA32_XSS from vmx into common code so
that it can be used for svm as well.
Right now, kvm only allows the guest IA32_XSS to be zero,
so the guest's usage of XSAVES will be exactly the same as XSAVEC.
Reviewed-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Aaron Lewis <aaronlewis@google.com>
Change-Id: Ie4b0f777d71e428fbee6e82071ac2d7618e9bb40
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Hoist the vendor-specific code related to loading the hardware IA32_XSS
MSR with guest/host values on VM-entry/VM-exit to common x86 code.
Reviewed-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Aaron Lewis <aaronlewis@google.com>
Change-Id: Ic6e3430833955b98eb9b79ae6715cf2a3fdd6d82
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The kvm_vcpu variable, guest_xcr0_loaded, is a waste of an 'int'
and a conditional branch. VMX and SVM are the only users, and both
unconditionally pair kvm_load_guest_xcr0() with kvm_put_guest_xcr0()
making this check unnecessary. Without this variable, the predicates in
kvm_load_guest_xcr0 and kvm_put_guest_xcr0 should match.
Suggested-by: Sean Christopherson <sean.j.christopherson@intel.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Aaron Lewis <aaronlewis@google.com>
Change-Id: I7b1eb9b62969d7bbb2850f27e42f863421641b23
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If we reach here with r = 0, we will reassign r = 0
unnecesarry, then do the label set_irqchip_out work.
If we reach here with r != 0, then we will do the label
work directly. So this if statement and r = 0 assignment
is redundant.
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Generally, APICv for all vcpus in the VM are enable/disable in the same
manner. So, get_enable_apicv() should represent APICv status of the VM
instead of each VCPU.
Modify kvm_x86_ops.get_enable_apicv() to take struct kvm as parameter
instead of struct kvm_vcpu.
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add helpers to prettify code that tests and/or marks whether or not a
register is available and/or dirty.
Suggested-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
After resetting the vCPU, the kvmclock MSR keeps the previous value but it is
not enabled. This can be confusing, so fix it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
