drmP.h is deprecated and will be deleted.
Replace use with proper header.
Divide header includes in blocks while touching these.
Build tested with various archtectures and configs.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Fixes: ae85b0df12 ("drm_dp_cec: add connector info support.")
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Sean Paul <sean@poorly.run>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: Dariusz Marcinkiewicz <darekm@google.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191007171224.1581-2-sam@ravnborg.org
Configure the display Quality of service (QoS) levels priority if the
optional property node "arm,malidp-aqros-value" is defined in DTS file.
QoS signaling using AQROS and AWQOS AXI interface signals, the AQROS is
driven from the "RQOS" register, so needed to program the RQOS register
to avoid the high resolutions flicker issue on the LS1028A platform.
Signed-off-by: Wen He <wen.he_1@nxp.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190910075913.17650-2-wen.he_1@nxp.com
Since the dirtyfb ioctl doesn't give us any hints as to which plane is
scanning out the fb it's marking as damaged, we need to loop through
planes to find it.
Currently we just reach into plane state and check, but that can race
with another commit changing the fb out from under us. This patch locks
the plane before checking the fb and will release the lock if the plane
is not displaying the dirty fb.
Fixes: b9fc5e01d1 ("drm: Add helper to implement legacy dirtyfb")
Cc: Rob Clark <robdclark@gmail.com>
Cc: Deepak Rawat <drawat@vmware.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v5.0+
Reported-by: Daniel Vetter <daniel@ffwll.ch>
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190904202938.110207-1-sean@poorly.run
The LCD timing definitions between Linux DRM vs Allwinner are different,
below diagram shows this clear differences.
Active Front Sync Back
Region Porch Porch
<-----------------------><----------------><--------------><-------------->
//////////////////////|
////////////////////// |
////////////////////// |.................. ................
________________
<----- [hv]display ----->
<------------- [hv]sync_start ------------>
<--------------------- [hv]sync_end ---------------------->
<-------------------------------- [hv]total ------------------------------>
<----- lcd_[xy] --------> <- lcd_[hv]spw ->
<---------- lcd_[hv]bp --------->
<-------------------------------- lcd_[hv]t ------------------------------>
The DSI driver misinterpreted the vbp term from the BSP code to refer
only to the backporch, when in fact it was backporch + sync. Thus the
driver incorrectly used the vertical front porch plus sync in its
calculation of the DRQ set bit value, when it should not have included
the sync timing.
Including additional sync timings leads to flip_done timed out as:
WARNING: CPU: 0 PID: 31 at drivers/gpu/drm/drm_atomic_helper.c:1429 drm_atomic_helper_wait_for_vblanks.part.1+0x298/0x2a0
[CRTC:46:crtc-0] vblank wait timed out
Modules linked in:
CPU: 0 PID: 31 Comm: kworker/0:1 Not tainted 5.1.0-next-20190514-00029-g09e5b0ed0a58 #18
Hardware name: Allwinner sun8i Family
Workqueue: events deferred_probe_work_func
[<c010ed54>] (unwind_backtrace) from [<c010b76c>] (show_stack+0x10/0x14)
[<c010b76c>] (show_stack) from [<c0688c70>] (dump_stack+0x84/0x98)
[<c0688c70>] (dump_stack) from [<c011d9e4>] (__warn+0xfc/0x114)
[<c011d9e4>] (__warn) from [<c011da40>] (warn_slowpath_fmt+0x44/0x68)
[<c011da40>] (warn_slowpath_fmt) from [<c040cd50>] (drm_atomic_helper_wait_for_vblanks.part.1+0x298/0x2a0)
[<c040cd50>] (drm_atomic_helper_wait_for_vblanks.part.1) from [<c040e694>] (drm_atomic_helper_commit_tail_rpm+0x5c/0x6c)
[<c040e694>] (drm_atomic_helper_commit_tail_rpm) from [<c040e4dc>] (commit_tail+0x40/0x6c)
[<c040e4dc>] (commit_tail) from [<c040e5cc>] (drm_atomic_helper_commit+0xbc/0x128)
[<c040e5cc>] (drm_atomic_helper_commit) from [<c0411b64>] (restore_fbdev_mode_atomic+0x1cc/0x1dc)
[<c0411b64>] (restore_fbdev_mode_atomic) from [<c04156f8>] (drm_fb_helper_restore_fbdev_mode_unlocked+0x54/0xa0)
[<c04156f8>] (drm_fb_helper_restore_fbdev_mode_unlocked) from [<c0415774>] (drm_fb_helper_set_par+0x30/0x54)
[<c0415774>] (drm_fb_helper_set_par) from [<c03ad450>] (fbcon_init+0x560/0x5ac)
[<c03ad450>] (fbcon_init) from [<c03eb8a0>] (visual_init+0xbc/0x104)
[<c03eb8a0>] (visual_init) from [<c03ed1b8>] (do_bind_con_driver+0x1b0/0x390)
[<c03ed1b8>] (do_bind_con_driver) from [<c03ed780>] (do_take_over_console+0x13c/0x1c4)
[<c03ed780>] (do_take_over_console) from [<c03ad800>] (do_fbcon_takeover+0x74/0xcc)
[<c03ad800>] (do_fbcon_takeover) from [<c013c9c8>] (notifier_call_chain+0x44/0x84)
[<c013c9c8>] (notifier_call_chain) from [<c013cd20>] (__blocking_notifier_call_chain+0x48/0x60)
[<c013cd20>] (__blocking_notifier_call_chain) from [<c013cd50>] (blocking_notifier_call_chain+0x18/0x20)
[<c013cd50>] (blocking_notifier_call_chain) from [<c03a6e44>] (register_framebuffer+0x1e0/0x2f8)
[<c03a6e44>] (register_framebuffer) from [<c04153c0>] (__drm_fb_helper_initial_config_and_unlock+0x2fc/0x50c)
[<c04153c0>] (__drm_fb_helper_initial_config_and_unlock) from [<c04158c8>] (drm_fbdev_client_hotplug+0xe8/0x1b8)
[<c04158c8>] (drm_fbdev_client_hotplug) from [<c0415a20>] (drm_fbdev_generic_setup+0x88/0x118)
[<c0415a20>] (drm_fbdev_generic_setup) from [<c043f060>] (sun4i_drv_bind+0x128/0x160)
[<c043f060>] (sun4i_drv_bind) from [<c044b598>] (try_to_bring_up_master+0x164/0x1a0)
[<c044b598>] (try_to_bring_up_master) from [<c044b668>] (__component_add+0x94/0x140)
[<c044b668>] (__component_add) from [<c0445e1c>] (sun6i_dsi_probe+0x144/0x234)
[<c0445e1c>] (sun6i_dsi_probe) from [<c0452ef4>] (platform_drv_probe+0x48/0x9c)
[<c0452ef4>] (platform_drv_probe) from [<c04512cc>] (really_probe+0x1dc/0x2c8)
[<c04512cc>] (really_probe) from [<c0451518>] (driver_probe_device+0x60/0x160)
[<c0451518>] (driver_probe_device) from [<c044f7a4>] (bus_for_each_drv+0x74/0xb8)
[<c044f7a4>] (bus_for_each_drv) from [<c045107c>] (__device_attach+0xd0/0x13c)
[<c045107c>] (__device_attach) from [<c0450474>] (bus_probe_device+0x84/0x8c)
[<c0450474>] (bus_probe_device) from [<c0450900>] (deferred_probe_work_func+0x64/0x90)
[<c0450900>] (deferred_probe_work_func) from [<c0135970>] (process_one_work+0x204/0x420)
[<c0135970>] (process_one_work) from [<c013690c>] (worker_thread+0x274/0x5a0)
[<c013690c>] (worker_thread) from [<c013b3d8>] (kthread+0x11c/0x14c)
[<c013b3d8>] (kthread) from [<c01010e8>] (ret_from_fork+0x14/0x2c)
Exception stack(0xde539fb0 to 0xde539ff8)
9fa0: 00000000 00000000 00000000 00000000
9fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
9fe0: 00000000 00000000 00000000 00000000 00000013 00000000
---[ end trace 495200a78b24980e ]---
random: fast init done
[drm:drm_atomic_helper_wait_for_dependencies] *ERROR* [CRTC:46:crtc-0] flip_done timed out
[drm:drm_atomic_helper_wait_for_dependencies] *ERROR* [CONNECTOR:48:DSI-1] flip_done timed out
[drm:drm_atomic_helper_wait_for_dependencies] *ERROR* [PLANE:30:plane-0] flip_done timed out
With the terms(as described in above diagram) fixed, the panel
displays correctly without any timeouts.
Tested-by: Merlijn Wajer <merlijn@wizzup.org>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191006160303.24413-2-icenowy@aosc.io
The static structure tilcdc_plane_funcs, of type drm_plane_funcs, is
used only when passed the fourth argument to drm_plane_init(); however,
this fourth parameter is declared as const in the function definition.
Hence make tilcdc_plane_funcs constant as well.
Issue found with Coccinelle.
Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190813090503.9063-1-nishkadg.linux@gmail.com
The DDC/CI protocol involves sending a multi-byte request to the
display via I2C, which is typically followed by a multi-byte
response. The internal I2C controller only allows single byte
reads/writes or reads of 8 sequential bytes, hence DDC/CI is not
supported when the internal I2C controller is used. The I2C
transfers complete without errors, however the data in the response
is garbage. Abort transfers to/from slave address 0x37 (DDC) with
-EOPNOTSUPP, to make it evident that the communication is failing.
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Sean Paul <sean@poorly.run>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191002124354.v2.1.I709dfec496f5f0b44a7b61dcd4937924da8d8382@changeid
The formula in the BSP kernel indicates that a 16-byte overhead is used
when sending the HFP. However, this value is currently set to 6 in the
sun6i_mipi_dsi driver, which makes some panels flashing.
Fix this overhead value.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191006160303.24413-3-icenowy@aosc.io
It is possible for one HDMI connector to have multiple CEC adapters. The
typical real-world scenario is that where one adapter is used when the
device is in standby, and one that's better/smarter when the device is
powered up.
The cec-notifier changes were made with that in mind, but I missed that in
order to support this you need to tell cec_notifier_cec_adap_unregister()
which adapter you are unregistering from the notifier.
Add this additional argument. It is currently unused, but once all drivers
use this, the CEC core will be adapted for these use-cases.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/e9fc8740-6be6-43a7-beee-ce2d7b54936e@xs4all.nl
The "used" variables here come from the user in the ioctl and it can be
negative. It could result in an out of bounds write.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191004102251.GC823@mwanda
Cc: stable@vger.kernel.org
Add the DRM_FORMAT_MOD_ARM_16X16_BLOCK_U_INTERLEAVED modifier to
denote the 16x16 block u-interleaved format used in Arm Utgard and
Midgard GPUs.
Changes from v1:-
1. Reserved the upper four bits (out of the 56 bits assigned to each vendor)
to denote the category of Arm specific modifiers. Currently, we have two
categories ie AFBC and MISC.
Changes from v2:-
1. Preserved Ray's authorship
2. Cleanups/changes suggested by Brian
3. Added r-bs of Brian and Qiang
Signed-off-by: Raymond Smith <raymond.smith@arm.com>
Reviewed-by: Brian Starkey <brian.starkey@arm.com>
Reviewed-by: Qiang Yu <yuq825@gmail.com>
Signed-off-by: Ayan kumar halder <ayan.halder@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191004141222.22337-1-ayan.halder@arm.com
A few callers need to serialise the destruction of their drm_mm_node and
ensure it is removed from the drm_mm before freeing. However, to be
completely sure that any access from another thread is complete before
we free the struct, we require the RELEASE semantics of
clear_bit_unlock().
This allows the conditional locking such as
Thread A Thread B
mutex_lock(mm_lock); if (drm_mm_node_allocated(node)) {
drm_mm_node_remove(node); mutex_lock(mm_lock);
mutex_unlock(mm_lock); if (drm_mm_node_allocated(node))
drm_mm_node_remove(node);
mutex_unlock(mm_lock);
}
kfree(node);
to serialise correctly without any lingering accesses from A to the
freed node. Allocation / insertion of the node is assumed never to race
with removal or eviction scanning.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191003210100.22250-5-chris@chris-wilson.co.uk
A straightforward conversion of assignment and checking of the boolean
state flags (allocated, scanned) into non-atomic bitops. The caller
remains responsible for all locking around the drm_mm and its nodes.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191003210100.22250-4-chris@chris-wilson.co.uk
Make dma_fence_enable_sw_signaling() behave like its
dma_fence_add_callback() and dma_fence_default_wait() counterparts and
perform the test to enable signaling under the fence->lock, along with
the action to do so. This ensure that should an implementation be trying
to flush the cb_list (by signaling) on retirement before freeing the
fence, it can do so in a race-free manner.
See also 0fc89b6802 ("dma-fence: Simply wrap dma_fence_signal_locked
with dma_fence_signal").
v2: Refactor all 3 enable_signaling paths to use a common function.
v3: Don't argue, just keep the tracepoint in the existing spot.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191004101140.32713-1-chris@chris-wilson.co.uk
If use_mclk is false, mclk_mode is written to a register without
initialization. This doesn't cause any ill effects as the written value
is not used when use_mclk is false.
To fix this, write use_mclk only when use_mclk is true.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190930103840.18970-8-tomi.valkeinen@ti.com
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Currently the HDMI driver uses always limited range RGB output. This
patch improves the behavior by using limited range only if the output is
identified as a HDMI display, and VIC > 1.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190930103840.18970-7-tomi.valkeinen@ti.com
The core.c just for registering the drivers is kind of useless. Let's
get rid of it and register the dss drivers in dss.c.
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190930103840.18970-6-tomi.valkeinen@ti.com
OMAP2 and OMAP3/AM4 have limitations with the scaler:
- OMAP2 can only scale XRGB8888
- OMAP3/AM4 can only scale XRGB8888, RGB565, YUYV and UYVY
The driver doesn't check these limitations, which leads to sync-lost
floods.
This patch adds a check for the pixel formats when scaling.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190930103840.18970-5-tomi.valkeinen@ti.com
A "HDMI I2C Master Error" is sometimes reported with the current DDC SCL
timings. The current settings for a 10us SCL period (100 KHz) causes the
error with some displays. This patch increases the SCL signal period
from 10us to 10.2us, with the new settings the error is not observed
Signed-off-by: Alejandro Hernandez <ajhernandez@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190930103840.18970-4-tomi.valkeinen@ti.com
Commit d49cd15550 ("OMAPDSS: DISPC: lock
access to DISPC_CONTROL & DISPC_CONFIG") added locking to
mgr_fld_write(). This was needed in omapfb times due to lack of good
locking, especially in the case of both V4L2 and fbdev layers using the
DSS driver.
This is not needed for omapdrm, so we can remove the locking.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190930103840.18970-2-tomi.valkeinen@ti.com
By putting cursor BOs at the high end of the video memory, we can avoid
memory fragmentation. Starting at the low end, contiguous video memory is
available for framebuffers.
The patch also simplifies the buffer swapping and aligns it with the
ast driver. If there are more drivers with similar requirements, the
code could be moved into a shared place.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190927091301.10574-8-tzimmermann@suse.de
The double-buffered cursor image is currently stored in video memory
by creating two BOs and pinning them to VRAM. The exact location is
chosen by VRAM helpers. The pinned cursor BOs can conflict with
framebuffer BOs and prevent the primary plane from displaying its
framebuffer.
As a first step to solving this problem, we reserve dedicated space at
the high end of the video memory for the cursor images. As the amount
of video memory now differs from the amount of available framebuffer
memory, size tests are adapted accordingly.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190927091301.10574-7-tzimmermann@suse.de
Separating the management of buffer objects from updating the hardware
cursor buffer gives the code more structure. While doing this, we can
further split the image-update code into code for writing the buffer,
setting the base scan-out address, and enabling the cursor. The first
two operations are in dedicated functions update() and set_base().
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190927091301.10574-5-tzimmermann@suse.de
By putting cursor BOs at the high end of the video memory, we can avoid
memory fragmentation. Starting at the low end, contiguous video memory is
available for framebuffers.
The patch also simplifies the buffer swapping by splitting
struct ast_private.cursor_cache BO into two separate boffer objects. Cursor
images alternate between these buffers instead of offsets within cursor_cache.
v3:
* fixes space-before-tab error near AST_HWC_SIGNATURE_CHECKSUM
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190927090309.10254-6-tzimmermann@suse.de
A call to ast's show-cursor function now receives the cursor image
and updates the buffer. The change splits off image update and
base-address update into separate functions.
v3:
* move ast_{show,hide}_cursor() in a previous patch
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190927090309.10254-4-tzimmermann@suse.de
Separating the cursor's move() function from the show() function in
preparation of further rework of the cursor update code.
'Showing' the cursor from within the move() function is required to
update the cursor position.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190927090309.10254-2-tzimmermann@suse.de
We haven't done any backmerge for a while due to the merge window, and it
starts to become an issue for komeda. Let's bring 5.4-rc1 in.
Signed-off-by: Maxime Ripard <mripard@kernel.org>
This reverts commit da676c6aa6.
The original commit adds a start parameter to the calculation of the
start delay according to some old BSP versions from Allwinner. However,
there're two ways to add this delay -- add it in DSI controller or add
it in the TCON. Add it in both controllers won't work.
The code before this commit is picked from new versions of BSP kernel,
which has a comment for the 1 that says "put start_delay to tcon". By
checking the sun4i_tcon0_mode_set_cpu() in sun4i_tcon driver, it has
already added this delay, so we shouldn't repeat to add the delay in DSI
controller, otherwise the timing won't match.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191001080253.6135-2-icenowy@aosc.io
The LCD timing definitions between Linux DRM vs Allwinner are different,
below diagram shows this clear differences.
Active Front Sync Back
Region Porch Porch
<-----------------------><----------------><--------------><-------------->
//////////////////////|
////////////////////// |
////////////////////// |.................. ................
________________
<----- [hv]display ----->
<------------- [hv]sync_start ------------>
<--------------------- [hv]sync_end ---------------------->
<-------------------------------- [hv]total ------------------------------>
<----- lcd_[xy] --------> <- lcd_[hv]spw ->
<---------- lcd_[hv]bp --------->
<-------------------------------- lcd_[hv]t ------------------------------>
The DSI driver misinterpreted the hbp term from the BSP code to refer
only to the backporch, when in fact it was backporch + sync. Thus the
driver incorrectly used the horizontal front porch plus sync in its
calculation of the DRQ set bit value, when it should not have included
the sync timing.
Including additional sync timings leads to flip_done timed out as:
WARNING: CPU: 0 PID: 31 at drivers/gpu/drm/drm_atomic_helper.c:1429 drm_atomic_helper_wait_for_vblanks.part.1+0x298/0x2a0
[CRTC:46:crtc-0] vblank wait timed out
Modules linked in:
CPU: 0 PID: 31 Comm: kworker/0:1 Not tainted 5.1.0-next-20190514-00026-g01f0c75b902d-dirty #13
Hardware name: Allwinner sun8i Family
Workqueue: events deferred_probe_work_func
[<c010ed54>] (unwind_backtrace) from [<c010b76c>] (show_stack+0x10/0x14)
[<c010b76c>] (show_stack) from [<c0688c70>] (dump_stack+0x84/0x98)
[<c0688c70>] (dump_stack) from [<c011d9e4>] (__warn+0xfc/0x114)
[<c011d9e4>] (__warn) from [<c011da40>] (warn_slowpath_fmt+0x44/0x68)
[<c011da40>] (warn_slowpath_fmt) from [<c040cd50>] (drm_atomic_helper_wait_for_vblanks.part.1+0x298/0x2a0)
[<c040cd50>] (drm_atomic_helper_wait_for_vblanks.part.1) from [<c040e694>] (drm_atomic_helper_commit_tail_rpm+0x5c/0x6c)
[<c040e694>] (drm_atomic_helper_commit_tail_rpm) from [<c040e4dc>] (commit_tail+0x40/0x6c)
[<c040e4dc>] (commit_tail) from [<c040e5cc>] (drm_atomic_helper_commit+0xbc/0x128)
[<c040e5cc>] (drm_atomic_helper_commit) from [<c0411b64>] (restore_fbdev_mode_atomic+0x1cc/0x1dc)
[<c0411b64>] (restore_fbdev_mode_atomic) from [<c04156f8>] (drm_fb_helper_restore_fbdev_mode_unlocked+0x54/0xa0)
[<c04156f8>] (drm_fb_helper_restore_fbdev_mode_unlocked) from [<c0415774>] (drm_fb_helper_set_par+0x30/0x54)
[<c0415774>] (drm_fb_helper_set_par) from [<c03ad450>] (fbcon_init+0x560/0x5ac)
[<c03ad450>] (fbcon_init) from [<c03eb8a0>] (visual_init+0xbc/0x104)
[<c03eb8a0>] (visual_init) from [<c03ed1b8>] (do_bind_con_driver+0x1b0/0x390)
[<c03ed1b8>] (do_bind_con_driver) from [<c03ed780>] (do_take_over_console+0x13c/0x1c4)
[<c03ed780>] (do_take_over_console) from [<c03ad800>] (do_fbcon_takeover+0x74/0xcc)
[<c03ad800>] (do_fbcon_takeover) from [<c013c9c8>] (notifier_call_chain+0x44/0x84)
[<c013c9c8>] (notifier_call_chain) from [<c013cd20>] (__blocking_notifier_call_chain+0x48/0x60)
[<c013cd20>] (__blocking_notifier_call_chain) from [<c013cd50>] (blocking_notifier_call_chain+0x18/0x20)
[<c013cd50>] (blocking_notifier_call_chain) from [<c03a6e44>] (register_framebuffer+0x1e0/0x2f8)
[<c03a6e44>] (register_framebuffer) from [<c04153c0>] (__drm_fb_helper_initial_config_and_unlock+0x2fc/0x50c)
[<c04153c0>] (__drm_fb_helper_initial_config_and_unlock) from [<c04158c8>] (drm_fbdev_client_hotplug+0xe8/0x1b8)
[<c04158c8>] (drm_fbdev_client_hotplug) from [<c0415a20>] (drm_fbdev_generic_setup+0x88/0x118)
[<c0415a20>] (drm_fbdev_generic_setup) from [<c043f060>] (sun4i_drv_bind+0x128/0x160)
[<c043f060>] (sun4i_drv_bind) from [<c044b598>] (try_to_bring_up_master+0x164/0x1a0)
[<c044b598>] (try_to_bring_up_master) from [<c044b668>] (__component_add+0x94/0x140)
[<c044b668>] (__component_add) from [<c0445e1c>] (sun6i_dsi_probe+0x144/0x234)
[<c0445e1c>] (sun6i_dsi_probe) from [<c0452ef4>] (platform_drv_probe+0x48/0x9c)
[<c0452ef4>] (platform_drv_probe) from [<c04512cc>] (really_probe+0x1dc/0x2c8)
[<c04512cc>] (really_probe) from [<c0451518>] (driver_probe_device+0x60/0x160)
[<c0451518>] (driver_probe_device) from [<c044f7a4>] (bus_for_each_drv+0x74/0xb8)
[<c044f7a4>] (bus_for_each_drv) from [<c045107c>] (__device_attach+0xd0/0x13c)
[<c045107c>] (__device_attach) from [<c0450474>] (bus_probe_device+0x84/0x8c)
[<c0450474>] (bus_probe_device) from [<c0450900>] (deferred_probe_work_func+0x64/0x90)
[<c0450900>] (deferred_probe_work_func) from [<c0135970>] (process_one_work+0x204/0x420)
[<c0135970>] (process_one_work) from [<c013690c>] (worker_thread+0x274/0x5a0)
[<c013690c>] (worker_thread) from [<c013b3d8>] (kthread+0x11c/0x14c)
[<c013b3d8>] (kthread) from [<c01010e8>] (ret_from_fork+0x14/0x2c)
Exception stack(0xde539fb0 to 0xde539ff8)
9fa0: 00000000 00000000 00000000 00000000
9fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
9fe0: 00000000 00000000 00000000 00000000 00000013 00000000
---[ end trace b57eb1e5c64c6b8b ]---
random: fast init done
[drm:drm_atomic_helper_wait_for_dependencies] *ERROR* [CRTC:46:crtc-0] flip_done timed out
[drm:drm_atomic_helper_wait_for_dependencies] *ERROR* [CONNECTOR:48:DSI-1] flip_done timed out
[drm:drm_atomic_helper_wait_for_dependencies] *ERROR* [PLANE:30:plane-0] flip_done timed out
With the terms(as described in above diagram) fixed, the panel
displays correctly without any timeouts.
Tested-by: Merlijn Wajer <merlijn@wizzup.org>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191003064527.15128-2-jagan@amarulasolutions.com
Allwinner MIPI DSI controllers are supplied with SoC
DSI power rails via VCC-DSI pin.
Add support for this supply pin by adding voltage
regulator handling code to MIPI DSI driver.
Tested-by: Merlijn Wajer <merlijn@wizzup.org>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191003064527.15128-6-jagan@amarulasolutions.com
Allwinner MIPI DSI controllers are supplied with SoC DSI
power rails via VCC-DSI pin.
Some board still work without supplying this but give more
faith on datasheet and hardware schematics and document this
supply property in required property list.
Reviewed-by: Rob Herring <robh@kernel.org>
Tested-by: Merlijn Wajer <merlijn@wizzup.org>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191003064527.15128-5-jagan@amarulasolutions.com
Add helper to check if a drm debug category is enabled. Convert drm core
to use it. No functional changes.
v2: Move unlikely() to drm_debug_enabled() (Eric)
v3: Keep unlikely() when combined with other conditions (Eric)
Cc: Eric Engestrom <eric@engestrom.ch>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191001140614.26909-1-jani.nikula@intel.com
When initially turning a crtc on, drm_reset_vblank_timestamp will
set the vblank timestamp to 0 for any driver that doesn't provide
a ->get_vblank_timestamp() hook.
Unfortunately, the FLIP_COMPLETE event depends on that timestamp,
and the only way to regenerate a valid one is to have vblank
interrupts enabled and have a valid in-ISR call to
drm_crtc_handle_vblank.
Additionally, if the user doesn't request vblanks but _does_ request
FLIP_COMPLETE events, we still don't have a good timestamp: it'll be the
same stamp as the last vblank one.
Work around the issue by always enabling vblanks when the CRTC is on.
Reducing the amount of time that PL0 has to be unmasked would be nice to
fix at a later time.
Changes since v1 [https://patchwork.freedesktop.org/patch/331727/]:
- moved drm_crtc_vblank_put call to the ->atomic_disable() hook
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Liviu Dudau <Liviu.Dudau@arm.com>
Signed-off-by: Mihail Atanassov <mihail.atanassov@arm.com>
Reviewed-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Ayan kumar halder <ayan.halder@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191001142121.13939-1-mihail.atanassov@arm.com
No change in behaviour; IRQ_RETVAL is about twice as popular as
manually writing out the ternary.
Signed-off-by: Mihail Atanassov <mihail.atanassov@arm.com>
Reviewed-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Ayan kumar halder <ayan.halder@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190920151247.25128-1-mihail.atanassov@arm.com
