We need to set the long name to the name specified via, for instance,
'perf annotate --vmlinux /path/to/vmlinux', if not it will remain as
'[kernel.kallsyms]' and that will make annotate fail when passing this
as the vmlinux name in the call to objdump.
The way this is setup grew unwieldly and dso__load_vmlinux is the
function that should allocate space for the long name, with callers not
assuming that filenames should be allocated somehow by then (strdup,
dso__build_id_filename, etc).
For now this is the minimalistic patch, a proper fix for .36 will be
made.
Reported-by: Stephane Eranian <eranian@google.com>
Tested-by: Stephane Eranian <eranian@google.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <20100604003900.GD10469@ghostprotocols.net>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When we use plain 'perf buildid-list' we use only what is in the buildid
table in the perf.data header. And those have absolute pathnames because
at 'perf record' time we used __perf_session__process_events and that
doesn't sets up the path shortening code in map__new() that happens if
symbol_conf.full_paths is false, the default.
On the other hand, when we use 'perf buildid-list --with-hits' we
process all the events using perf_session__process_events, adding
entries to the global DSO list _after_ removing the current directory
from the DSO name, for presentation purposes.
Because of that we end up having two entries in the DSO list when
recording events for binaries using relative pathnames.
Fix it minimally by setting symbol_conf.full_paths to true when marking
the DSOs with hits in 'perf buildid-list --with-hits', as used by 'perf
archive'
Right fix longer term is to shorten the path only at presentation time.
Will be done for 2.6.36.
Reported-by: Stephane Eranian <eranian@google.com>
Tested-by: Stephane Eranian <eranian@google.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <20100601183837.GC4093@ghostprotocols.net>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
trace_unhandled() callback does not allow to access event fields, this patch
resolves the problem.
It can also been used as a more pythonic and flexible way for script writters
to demux event types
This will for example greatly simplify pytimechart event demux.
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Tom Zanussi <tzanussi@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>,
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <1275340329-2397-1-git-send-email-tardyp@gmail.com>
Signed-off-by: Pierre Tardy <tardyp@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
hist_entry__annotate() runs objdump with -S option so the output may contain
lines of any format. If a line starts with a colon strtoull() returns 0 and
calculated offset will be negative. This causes perf annotate segfaults.
Make sure that strtoull() has parsed at least one digit.
Cc: David S. Miller <davem@davemloft.net>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Konstantin Stepanyuk <konstantin.stepanyuk@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When forking the child to be traced, we should check the correct
return value from fork() and not a local variable which is otherwise
unused.
Signed-off-by: Borislav Petkov <bp@alien8.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Stephane Eranian <eranian@google.com>
LKML-Reference: <20100531211818.GA30175@liondog.tnic>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
event__process_task() doesn't propagate the comm copy on clone,
but only on process fork. So we loose all the tid:comm resolution
for tasks that aren't a main process thread.
Progragate the per thread granularity to event__process_task for
pid resolution.
This fixes various unresolved pids in perf sched, especially when
we trace multithread processes. The problem is quickly reproducible
with the messaging benchmark using the multithread mode "-t" :
perf sched record perf bench sched messaging -t
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Stephane Eranian <eranian@google.com>
perf sched uses event__process_comm(), which means it can resolve
comms from:
- tasks that have exec'ed (kernel comm events)
- tasks that were running when perf record started the actual
recording (synthetized comm events)
But perf sched can't resolve the pids of tasks that were created
after the recording started.
To solve this, we need to inherit the comms on fork events using
event__process_task().
This fixes various unresolved pids in perf sched, easily visible
with:
perf sched record perf bench sched messaging
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Stephane Eranian <eranian@google.com>
When we synthetize the existing running tasks though procfs,
we walk through every threads of a process, queuing one comm
events per tid.
But then on report time, event__process_comm() only creates and
sets the comm on a per process granularity. This is the right
thing for comm events that came from the kernel, as they are
only created on exec. Sub-threads then inherit their comm
from fork events. But that doesn't work with our synthetized
comm events taken from procfs informations as the per thread
granularity is done on comm events directly there.
Hence we need event__process_comm() to work with the tid rather
than the pid. It won't change anything for comm events coming
from the kernel but this will fix the synthetized ones.
Before:
$ ./perf report -D | grep COMM | grep firefox
0x2c7b8 [0x18]: PERF_RECORD_COMM: firefox:5297
0x2c7d0 [0x18]: PERF_RECORD_COMM: firefox:5297
0x2c7e8 [0x18]: PERF_RECORD_COMM: firefox:5297
0x2c800 [0x18]: PERF_RECORD_COMM: firefox:5297
0x2c818 [0x18]: PERF_RECORD_COMM: firefox:5297
0x2c830 [0x18]: PERF_RECORD_COMM: firefox:5297
After:
$ ./perf report -D | grep COMM | grep firefox
0x2c7b8 [0x18]: PERF_RECORD_COMM: firefox:5297
0x2c7d0 [0x18]: PERF_RECORD_COMM: firefox:5299
0x2c7e8 [0x18]: PERF_RECORD_COMM: firefox:5300
0x2c800 [0x18]: PERF_RECORD_COMM: firefox:5308
0x2c818 [0x18]: PERF_RECORD_COMM: firefox:5309
0x2c830 [0x18]: PERF_RECORD_COMM: firefox:5312
This fixes various unresolved pid on perf sched.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Stephane Eranian <eranian@google.com>
* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
perf tui: Fix last use_browser problem related to .perfconfig
perf symbols: Add the build id cache to the vmlinux path
perf tui: Reset use_browser if stdout is not a tty
ring-buffer: Move zeroing out excess in page to ring buffer code
ring-buffer: Reset "real_end" when page is filled
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (61 commits)
tracing: Add __used annotation to event variable
perf, trace: Fix !x86 build bug
perf report: Support multiple events on the TUI
perf annotate: Fix up usage of the build id cache
x86/mmiotrace: Remove redundant instruction prefix checks
perf annotate: Add TUI interface
perf tui: Remove annotate from popup menu after failure
perf report: Don't start the TUI if -D is used
perf: Fix getline undeclared
perf: Optimize perf_tp_event_match()
perf: Remove more code from the fastpath
perf: Optimize the !vmalloc backed buffer
perf: Optimize perf_output_copy()
perf: Fix wakeup storm for RO mmap()s
perf-record: Share per-cpu buffers
perf-record: Remove -M
perf: Ensure that IOC_OUTPUT isn't used to create multi-writer buffers
perf, trace: Optimize tracepoints by using per-tracepoint-per-cpu hlist to track events
perf, trace: Optimize tracepoints by removing IRQ-disable from perf/tracepoint interaction
perf tui: Allow disabling the TUI on a per command basis in ~/.perfconfig
...
When we moved to using ~/.perfconfig to set the value of use_browser,
it changed from a boolean to an int so that the convention used for
use_pager was followed.
That convention is:
-1: unspecified, that is what use_{browser,pager} is initialized
0: Don't use the browser (should be TUI), because was explicitely
set to 0/off/false on ~/.perfconfig [tui] cmd =, or because
we're redirecting the stdout to a file or piping it to some
other command (!isatty()).
1: Use the TUI
Some code was not properly audited and continued testing it as a
boolean, this seems to be the last one.
Reported-by: Frédéric Weisbecker <fweisbec@gmail.com>
Tested-by: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that if the kernel DSO has a build id because record inserted it in
the perf.data build id table in the header, or a BUILD_ID event was
inserted in the stream, we first look at the build id cache
($HOME/.debug/).
If we find it there, try to use it, allowing offline annotation in
addition to 'perf report'.
Reported-by: Stephane Eranian <eranian@google.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The newt initialization routines weren't being called because the output
was a file (perf annotate > /tmp/bla) but use_browser was still 1,
because ~/.perfconfig had it as 'on', so, later on newt routines
segfaulted.
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The hists__tty_browse_tree function was created with the loop to print
all events, and its equivalent, hists__tui_browse_tree, was created in a
similar fashion, where it is possible to switch among the multiple
events, if present, using TAB to go the next event, and shift+TAB
(UNTAB) to go to the previous.
The report TUI now shows as the window title the name of the event and a
leak was fixed wrt pstacks.
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It was assuming that the cache was always available and also wasn't
checking if the file found in the build id cache was just a kallsyms
file, that is not supported by objdump for disassembly.
Reported-by: Ingo Molnar <mingo@elte.hu>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When annotating multiple entries, for instance, when running simply as:
$ perf annotate
the right and left keys, as well as TAB can be used to cycle thru the
multiple symbols being annotated.
If one doesn't like TUI annotate, disable it by editing ~/.perfconfig
and adding:
[tui]
annotate = off
Just like it is possible for report.
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
One day we'll have support for the "dump raw trace in ASCII" in the TUI
frontend, but till then, use the tty code.
Reported-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We need to have stdio.h included with _GNU_SOURCEfopr getline,
which is broken with the inclusion of build-id.h.
Keep util.h included first in hist.c
Fixes:
util/hist.c: Dans la fonction «hist_entry__parse_objdump_line» :
util/hist.c:938: attention : déclaration implicite de la fonction « «getline» »
util/hist.c:938: attention : nested extern declaration of «getline»
make: *** [util/hist.o] Erreur 1
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1274438919-5104-1-git-send-regression-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
It seems a waste of space to create a buffer per
event, share it per-cpu.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <20100521090710.634824884@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Since it is not allowed to create cross-cpu (or
cross-task) buffers, this option is no longer valid.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <20100521090710.582740993@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Using the same scheme as for git's/perf's pager setup, i.e. if one
doesn't want to, on a newt enabled perf binary, to disable the TUI for
'perf report', its just a matter of doing:
[root@doppio linux-2.6-tip]# printf "[tui]\n\nreport = off\n" >
/root/.perfconfig
[root@doppio linux-2.6-tip]# cat /root/.perfconfig
[tui]
report = off
[root@doppio linux-2.6-tip]#
System wide settings are also possible, by editing /etc/perfconfig, etc,
i.e. the git machinery for config files applies to perf as well, so when
in doubt where to put your settings, consult the git documentation, if
it fails, please let us know.
Suggested-by: Ingo Molnar <mingo@elte.hu>
Discussed-with: Stephane Eranian <eranian@google.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Perf record repeatedly calls gettimeofday() which adds noise to the performance
measurements. Since gettimeofday() is only used for the error printf, delete
it.
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
LKML-Reference: <20100518225240.GC25589@sgi.com>
Signed-off-by: Russ Anderson <rja@sgi.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The FunctionFS gadget may provide the source/sink interface
not as the first interface (with id == 0) but some different
interface hence a code to find the interface number is
required.
(Note that you will still configure the gadget to report
idProduct == 0xa4a4 (an "echo 0xa4a4
>/sys/module/g_ffs/parameters/usb_product" should suffice) or
configure host to handle 0x0525:0xa4ac devices using the
usbtest driver.)
Signed-off-by: Michal Nazarewicz <m.nazarewicz@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The testusb program just issues ioctls to perform the tests
implemented by the kernel driver. It can generate a variety
of transfer patterns; you should make sure to test both regular
streaming and mixes of transfer sizes (including short transfers).
For more information on how this can be used and on USB testing
refer to <URL:http://www.linux-usb.org/usbtest/>.
Signed-off-by: Michal Nazarewicz <m.nazarewicz@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This adds an example user-space FunctionFS driver which
implements a source/sink interface used for testing.
Signed-off-by: Michal Nazarewicz <m.nazarewicz@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
We were still using the pathname found on the MMAP event, that could not
be the one we used when recording, so use the build-id cache for that,
only falling back to use the pathname in the MMAP event if no build-ids
are available.
With this we now also are able to do secure, seamless offline annotation.
Example:
[root@doppio linux-2.6-tip]# perf report -g none -v 2> /dev/null | head -10
8.12% Xorg /usr/lib64/libpixman-1.so.0.14.0 0x0000000000026d02 B [.] pixman_rasterize_edges
4.68% firefox /usr/lib64/xulrunner-1.9.1/libxul.so 0x00000000005dbdba B [.] 0x000000005dbdba
3.70% swapper /lib/modules/2.6.34-rc6/build/vmlinux 0xffffffff81022cea ! [k] read_hpet
2.96% init /lib/modules/2.6.34-rc6/build/vmlinux 0xffffffff81022cea ! [k] read_hpet
2.73% swapper /lib/modules/2.6.34-rc6/build/vmlinux 0xffffffff8100a738 ! [k] mwait_idle_with_hints
[root@doppio linux-2.6-tip]# perf annotate -v pixman_rasterize_edges 2>&1 | grep Executing
Executing: objdump --start-address=0x000000371ce26670 --stop-address=0x000000371ce2709f -dS /root/.debug/.build-id/bd/6ac5199137aaeb279f864717d8d061477466c1|grep -v /root/.debug/.build-id/bd/6ac5199137aaeb279f864717d8d061477466c1|expand
[root@doppio linux-2.6-tip]# perf buildid-list | grep libpixman-1.so.0.14.0
bd6ac5199137aaeb279f864717d8d061477466c1 /usr/lib64/libpixman-1.so.0.14.0
[root@doppio linux-2.6-tip]#
Reported-by: Stephane Eranian <eranian@google.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Just like if one is using the stdio based pager, or more/less, for that
matter.
Suggested-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Accessing trace values of an 8 size may end up in a segfault
on archs that can't deal with misaligned access, which is the
case for sparc 64. This is because PERF_SAMPLE_RAW are aligned
to 4 and not to 8.
Fix this on the macros that get the values of 8 size.
This fixes segfaults on perf tools in sparc 64.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Cc: David Miller <davem@davemloft.net>
This is a small fix for a problem affecting live-mode, introduced
recently:
root@tropicana:~# perf trace rwtop
perf trace started with Perl
script /root/libexec/perf-core/scripts/perl/rwtop.pl
Fatal: did not read header event
commit d00a47cce5 added a skip()
function to skip over e.g. header_page, but this doesn't work for
live mode. This patch re-implements skip() to use read() instead of
lseek() to fix that.
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1273032130.6383.28.camel@tropicana>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
The changes made to support host and guest machines in a session, that
started when the 'perf kvm' tool was introduced ended up introducing a
bug where the host_machine was not having its DSOs traversed for
build-id processing.
Fix it by moving some methods to the right classes and considering the
host_machine when processing build-ids.
Reported-by: Tom Zanussi <tzanussi@gmail.com>
Reported-by: Stephane Eranian <eranian@google.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In __dsos__read_build_ids if the dso already had its build-id read,
don't try again.
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
All the functions that call this can handle the equivalent, non
panic'ing wrapped routines.
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Functions that were calling xzalloc also returned -1 when, for other
reasons, it could fail, and the calleds are coping with failures, so
stop using die() and xzalloc().
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
That could leave filedescriptors open and leak memory. Also stop using
xmalloc, use malloc and handle results just like other error cases in
the same routine that used it.
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Without the bloated cplus_demangle from binutils, i.e building with:
$ make NO_DEMANGLE=1 O=~acme/git/build/perf -j3 -C tools/perf/ install
Before:
text data bss dec hex filename
471851 29280 4025056 4526187 45106b /home/acme/bin/perf
After:
[acme@doppio linux-2.6-tip]$ size ~/bin/perf
text data bss dec hex filename
446886 29232 4008576 4484694 446e56 /home/acme/bin/perf
So its a 5.3% size reduction in code, but the interesting part is in the git
diff --stat output:
19 files changed, 20 insertions(+), 1909 deletions(-)
If we ever need some of the things we got from git but weren't using, we just
have to go to the git repo and get fresh, uptodate source code bits.
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It is hard to read very large numbers so provide an option to perf stat
to separate thousands using a separator. The patch leverages the locale
support of stdio. You need to set your LC_NUMERIC appropriately, for
instance LC_NUMERIC=en_US.UTF8. You need to pass -B to activate this
feature. This way existing scripts parsing the output do not need to be
changed. Here is an example.
$ perf stat noploop 2
noploop for 2 seconds
Performance counter stats for 'noploop 2':
1998.347031 task-clock-msecs # 0.998 CPUs
61 context-switches # 0.000 M/sec
0 CPU-migrations # 0.000 M/sec
118 page-faults # 0.000 M/sec
4,138,410,900 cycles # 2070.917 M/sec (scaled from 70.01%)
2,062,650,268 instructions # 0.498 IPC (scaled from 70.01%)
2,057,653,466 branches # 1029.678 M/sec (scaled from 70.01%)
40,267 branch-misses # 0.002 % (scaled from 30.04%)
2,055,961,348 cache-references # 1028.831 M/sec (scaled from 30.03%)
53,725 cache-misses # 0.027 M/sec (scaled from 30.02%)
2.001393933 seconds time elapsed
$ perf stat -B noploop 2
noploop for 2 seconds
Performance counter stats for 'noploop 2':
1998.297883 task-clock-msecs # 0.998 CPUs
59 context-switches # 0.000 M/sec
0 CPU-migrations # 0.000 M/sec
119 page-faults # 0.000 M/sec
4,131,380,160 cycles # 2067.450 M/sec (scaled from 70.01%)
2,059,096,507 instructions # 0.498 IPC (scaled from 70.01%)
2,054,681,303 branches # 1028.216 M/sec (scaled from 70.01%)
25,650 branch-misses # 0.001 % (scaled from 30.05%)
2,056,283,014 cache-references # 1029.017 M/sec (scaled from 30.03%)
47,097 cache-misses # 0.024 M/sec (scaled from 30.02%)
2.001391016 seconds time elapsed
Cc: David S. Miller <davem@davemloft.net>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <4bf28fe8.914ed80a.01ca.fffff5f5@mx.google.com>
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (311 commits)
perf tools: Add mode to build without newt support
perf symbols: symbol inconsistency message should be done only at verbose=1
perf tui: Add explicit -lslang option
perf options: Type check all the remaining OPT_ variants
perf options: Type check OPT_BOOLEAN and fix the offenders
perf options: Check v type in OPT_U?INTEGER
perf options: Introduce OPT_UINTEGER
perf tui: Add workaround for slang < 2.1.4
perf record: Fix bug mismatch with -c option definition
perf options: Introduce OPT_U64
perf tui: Add help window to show key associations
perf tui: Make <- exit menus too
perf newt: Add single key shortcuts for zoom into DSO and threads
perf newt: Exit browser unconditionally when CTRL+C, q or Q is pressed
perf newt: Fix the 'A'/'a' shortcut for annotate
perf newt: Make <- exit the ui_browser
x86, perf: P4 PMU - fix counters management logic
perf newt: Make <- zoom out filters
perf report: Report number of events, not samples
perf hist: Clarify events_stats fields usage
...
Fix up trivial conflicts in kernel/fork.c and tools/perf/builtin-record.c
slang versions <= 2.0.6 have a "#if HAVE_LONG_LONG" that breaks the
build if it isn't defined. Use the equivalent one that glibc has on
features.h.
Reported-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Check elfutils version, and if it is old don't compile CFI analysis code. This
allows to compile perf with old elfutils.
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Tested-by: Stephane Eranian <eranian@google.com>
Reported-by: Robert Richter <robert.richter@amd.com>
Cc: Ingo Molnar <mingo@elte.hu>
LKML-Reference: <20100510171207.26029.97604.stgit@localhost6.localdomain6>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
make NO_NEWT=1
Will avoid building the newt (tui) support.
Suggested-by: Ingo Molnar <mingo@elte.hu>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
That happened for an old perf.data file that had no fake MMAP events for
the kernel modules, but even then it should warn once for each module,
not one time for every symbol in every module not found.
Reported-by: Ingo Molnar <mingo@elte.hu>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
At least on rawhide using -lnewt is not enough if we use SLang routines
directly, so add an explicit -lslang since we use SLang routines.
Reported-by: Ingo Molnar <mingo@elte.hu>
Tested-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
OPT_SET_INT was renamed to OPT_SET_UINT since the only use in these
tools is to set something that has an enum type, that is builtin
compatible with unsigned int.
Several string constifications were done to make OPT_STRING require a
const char * type.
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To avoid problems like the one fixed by Stephane Eranian in 3de29ca, now
we'll got this instead:
bench/sched-messaging.c:259: error: negative width in bit-field ‘<anonymous>’
bench/sched-messaging.c:261: error: negative width in bit-field ‘<anonymous>’
Which is rather cryptic, but is how BUILD_BUG_ON_ZERO works, so kernel
hackers should be already used to this.
With it in place found some problems, fixed by changing the affected
variables to sensible types or changed some OPT_INTEGER to OPT_UINTEGER.
Next csets will go thru converting each of the remaining OPT_ so that
review can be made easier by grouping changes per type per patch.
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
