Constify device_get_match_data() as OF and ACPI variants return
constant value.
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Do the renaming to be consistent with its sibling, i.e.
of_device_get_match_data().
No functional change.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
As well as its sibling of_device_get_match_data() has no such checks,
no need to do it in acpi_get_match_data().
First of all, we are not supposed to call fwnode API like this without
driver attached.
Second, since __acpi_match_device() does check input parameter there is
no need to duplicate it outside.
And last but not least one, the API should still serve the cases when
ACPI device is enumerated via PRP0001. In such case driver has neither
ACPI table nor driver data there.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
When __acpi_match_device() is called it would be possible to have
ACPI ID table a NULL pointer. To avoid potential dereference,
check for this before traverse.
While here, remove redundant 'else'.
Note, this patch implies a bit of refactoring acpi_of_match_device()
to return pointer to OF ID when matched followed by refactoring
__acpi_match_device() to return either ACPI or OF ID when matches.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
Addresses-Coverity-ID: 1465078
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Commit 662591461c (ACPI / EC: Drop EC noirq hooks to fix a
regression) modified the ACPI EC driver so that it doesn't switch
over to busy polling mode during noirq stages of system suspend and
resume in an attempt to fix an issue resulting from that behavior.
However, that modification introduced a system resume regression on
Thinkpad X240, so make the EC driver switch over to the polling mode
during noirq stages of system suspend and resume again, which
effectively reverts the problematic commit.
Fixes: 662591461c (ACPI / EC: Drop EC noirq hooks to fix a regression)
Link: https://bugzilla.kernel.org/show_bug.cgi?id=197863
Reported-by: Markus Demleitner <m@tfiu.de>
Tested-by: Markus Demleitner <m@tfiu.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This is the mindless scripted replacement of kernel use of POLL*
variables as described by Al, done by this script:
for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do
L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'`
for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done
done
with de-mangling cleanups yet to come.
NOTE! On almost all architectures, the EPOLL* constants have the same
values as the POLL* constants do. But they keyword here is "almost".
For various bad reasons they aren't the same, and epoll() doesn't
actually work quite correctly in some cases due to this on Sparc et al.
The next patch from Al will sort out the final differences, and we
should be all done.
Scripted-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Update the ACPICA kernel code to upstream revision 20180105 including:
* Assorted fixes (Jung-uk Kim).
* Support for X32 ABI compilation (Anuj Mittal).
* Update of ACPICA copyrights to 2018 (Bob Moore).
- Prepare for future modifications to avoid executing the _STA control
method too early (Hans de Goede).
- Make the processor performance control library code ignore _PPC
notifications if they cannot be handled and fix up the C1 idle
state definition when it is used as a fallback state (Chen Yu,
Yazen Ghannam).
- Make it possible to use the SPCR table on x86 and to replace the
original IORT table with a new one from initrd (Prarit Bhargava,
Shunyong Yang).
- Add battery-related quirks for Asus UX360UA and UX410UAK and add
quirks for table parsing on Dell XPS 9570 and Precision M5530
(Kai Heng Feng).
- Address static checker warnings in the CPPC code (Gustavo Silva).
- Avoid printing a raw pointer to the kernel log in the smart
battery driver (Greg Kroah-Hartman).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=rVdp
-----END PGP SIGNATURE-----
Merge tag 'acpi-part2-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more ACPI updates from Rafael Wysocki:
"These are mostly fixes and cleanups, a few new quirks, a couple of
updates related to the handling of ACPI tables and ACPICA copyrights
refreshment.
Specifics:
- Update the ACPICA kernel code to upstream revision 20180105
including:
* Assorted fixes (Jung-uk Kim)
* Support for X32 ABI compilation (Anuj Mittal)
* Update of ACPICA copyrights to 2018 (Bob Moore)
- Prepare for future modifications to avoid executing the _STA
control method too early (Hans de Goede)
- Make the processor performance control library code ignore _PPC
notifications if they cannot be handled and fix up the C1 idle
state definition when it is used as a fallback state (Chen Yu,
Yazen Ghannam)
- Make it possible to use the SPCR table on x86 and to replace the
original IORT table with a new one from initrd (Prarit Bhargava,
Shunyong Yang)
- Add battery-related quirks for Asus UX360UA and UX410UAK and add
quirks for table parsing on Dell XPS 9570 and Precision M5530 (Kai
Heng Feng)
- Address static checker warnings in the CPPC code (Gustavo Silva)
- Avoid printing a raw pointer to the kernel log in the smart battery
driver (Greg Kroah-Hartman)"
* tag 'acpi-part2-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: sbshc: remove raw pointer from printk() message
ACPI: SPCR: Make SPCR available to x86
ACPI / CPPC: Use 64-bit arithmetic instead of 32-bit
ACPI / tables: Add IORT to injectable table list
ACPI / bus: Parse tables as term_list for Dell XPS 9570 and Precision M5530
ACPICA: Update version to 20180105
ACPICA: All acpica: Update copyrights to 2018
ACPI / processor: Set default C1 idle state description
ACPI / battery: Add quirk for Asus UX360UA and UX410UAK
ACPI: processor_perflib: Do not send _PPC change notification if not ready
ACPI / scan: Use acpi_bus_get_status() to initialize ACPI_TYPE_DEVICE devs
ACPI / bus: Do not call _STA on battery devices with unmet dependencies
PCI: acpiphp_ibm: prepare for acpi_get_object_info() no longer returning status
ACPI: export acpi_bus_get_status_handle()
ACPICA: Add a missing pair of parentheses
ACPICA: Prefer ACPI_TO_POINTER() over ACPI_ADD_PTR()
ACPICA: Avoid NULL pointer arithmetic
ACPICA: Linux: add support for X32 ABI compilation
ACPI / video: Use true for boolean value
* acpi-video:
ACPI / video: Use true for boolean value
* acpi-battery:
ACPI / battery: Add quirk for Asus UX360UA and UX410UAK
* acpi-cppc:
ACPI / CPPC: Use 64-bit arithmetic instead of 32-bit
* acpi-tables:
ACPI: SPCR: Make SPCR available to x86
ACPI / tables: Add IORT to injectable table list
* acpi-bus:
ACPI / bus: Parse tables as term_list for Dell XPS 9570 and Precision M5530
ACPI / scan: Use acpi_bus_get_status() to initialize ACPI_TYPE_DEVICE devs
ACPI / bus: Do not call _STA on battery devices with unmet dependencies
PCI: acpiphp_ibm: prepare for acpi_get_object_info() no longer returning status
ACPI: export acpi_bus_get_status_handle()
* acpi-processor:
ACPI / processor: Set default C1 idle state description
ACPI: processor_perflib: Do not send _PPC change notification if not ready
* acpica:
ACPICA: Update version to 20180105
ACPICA: All acpica: Update copyrights to 2018
ACPICA: Add a missing pair of parentheses
ACPICA: Prefer ACPI_TO_POINTER() over ACPI_ADD_PTR()
ACPICA: Avoid NULL pointer arithmetic
ACPICA: Linux: add support for X32 ABI compilation
There's no need to be printing a raw kernel pointer to the kernel log at
every boot. So just remove it, and change the whole message to use the
correct dev_info() call at the same time.
Reported-by: Wang Qize <wang_qize@venustech.com.cn>
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
SPCR is currently only enabled or ARM64 and x86 can use SPCR to setup
an early console.
General fixes include updating Documentation & Kconfig (for x86),
updating comments, and changing parse_spcr() to acpi_parse_spcr(),
and earlycon_init_is_deferred to earlycon_acpi_spcr_enable to be
more descriptive.
On x86, many systems have a valid SPCR table but the table version is
not 2 so the table version check must be a warning.
On ARM64 when the kernel parameter earlycon is used both the early console
and console are enabled. On x86, only the earlycon should be enabled by
by default. Modify acpi_parse_spcr() to allow options for initializing
the early console and console separately.
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Mark Salter <msalter@redhat.com>
Tested-by: Mark Salter <msalter@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add suffix ULL to constant 500 in order to give the compiler complete
information about the proper arithmetic to use. Notice that this
constant is used in a context that expects an expression of type
u64 (64 bits, unsigned).
The expression NUM_RETRIES * cppc_ss->latency at line 578, which at
preprocessing time translates to 500 * cppc_ss->latency is currently
being evaluated using 32-bit arithmetic.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Loading IORT table from initrd can be used to fix severe firmware
IORT defects temporarily before platform/BIOS vendor releases an
upgraded BIOS binary.
Moreover, it is very powerful to debug SMMU node/device probe, MSI
allocation, stream id translation and IORT table from firmware.
It is also very useful to enable SMMU and devices behind SMMU before
firmware is ready.
This patch adds ACPI_SIG_IORT to the table, which enables IORT
from initrd to override which from firmware.
Signed-off-by: Yang Shunyong <shunyong.yang@hxt-semitech.com>
Acked-by: Hanjun Guo <hanjun.guo@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
New model support added for Dell, Ideapad, Acer, Asus, Thinkpad, and GPD
laptops. Improvements to the common intel-vbtn driver, including tablet
mode, rotate, and front button support. Intel CPU support added for
Cannonlake and platform support for Dollar Cove power button.
Overhaul of the mellanox platform driver, creating a new
platform/mellanox directory for the newly multi-architecture regmap
interface.
Significant Intel PMC update with CannonLake support, Coffeelake update,
CPUID enumeration, module support, new read64 API, refactoring and
cleanups.
Revert the apple-gmux iGP IO lock, addressing reported issues with
non-binary drivers, leaving Nvidia binary driver users to comment out
conflicting code.
Miscellaneous fixes and cleanups.
Previously merged during the 4.15-rc cycle:
- e20a8e771d platform/x86: dell-laptop: Fix keyboard max lighting for Dell Latitude E6410
- 9cd5cf3710 platform/x86: asus-wireless: send an EV_SYN/SYN_REPORT between state changes
- 91c73e8092 platform/x86: dell-wmi: check for kmalloc() errors
- 9a1a625918 platform/x86: wmi: Call acpi_wmi_init() later
The following is an automated git shortlog grouped by driver:
ACPI / LPIT:
- Export lpit_read_residency_count_address()
Input:
- add KEY_ROTATE_LOCK_TOGGLE
MAINTAINERS:
- Update tree for platform-drivers-x86
x86/cpu:
- Add Cannonlake to Intel family
acer-wireless:
- Add Acer Wireless Radio Control driver
intel_chtdc_ti_pwrbtn:
- Add support for Dollar Cove TI power button
GPD pocket fan:
- Add driver for GPD pocket custom fan controller
- Stop work on suspend
- Use a min-speed of 2 while charging
- Set speed to max on get_temp failure
apple-gmux:
- Revert: lock iGP IO to protect from vgaarb changes
alienware-wmi:
- lightbar LED support for Dell Inspiron 5675
asus-nb-wmi:
- Support ALS on the Zenbook UX430UQ
dell-laptop:
- Allocate buffer on heap rather than globally
- Add 2-in-1 devices to the DMI whitelist
- Filter out spurious keyboard backlight change events
- make some local functions static
- Use bool in struct quirk_entry for true/false fields
dell-smbios:
- Correct notation for filtering
dell-wmi:
- Add an event created by Dell Latitude 5495
Kconfig
- have ACPI_CMPC use depends instead of select for INPUT
ideapad-laptop:
- Add Y720-15IKB to no_hw_rfkill
- add lenovo RESCUER R720-15IKBN to no_hw_rfkill_list
- Use __func__ instead of write_ec_cmd in pr_err
- Remove unnecessary else
intel-hid:
- add a DMI quirk to support Wacom MobileStudio Pro
intel-vbtn:
- Replace License by SDPX identifier
- Remove redundant inclusions
- Support tablet mode switch
- Simplify autorelease logic
- support panel front button
- support KEY_ROTATE_LOCK_TOGGLE
- Support separate press/release events
- support SW_TABLET_MODE
intel_int0002_vgpio:
- Remove IRQF_NO_THREAD irq flag
intel_pmc_core:
- Special case for Coffeelake
- Add CannonLake PCH support
- Read base address from LPIT
- Remove unused header file
- Convert to ICPU macro
- Substitute PCI with CPUID enumeration
- Refactor debugfs entries
- Update Kconfig
- Fix file permission warnings
- Change driver to a module
- Fix kernel doc for pmc_dev
- Remove unused variable
- Remove unused EXPORTED API
intel_pmc_ipc:
- Add read64 API
intel_telemetry:
- Remove redundancies
- Improve S0ix logs
- Fix suspend stats
mlx-platform:
- Fix an ERR_PTR vs NULL issue
- Add hotplug device unregister to error path
- fix module aliases
- Add IO access verification callbacks
- Document pdev_hotplug field
- Allow compilation for 32 bit arch
platform/mellanox:
- mlxreg-hotplug: Add check for negative adapter number
- mlxreg-hotplug: Enable building for ARM
- mlxreg-hotplug: Modify to use a regmap interface
- Group create/destroy with attribute functions
- Rename i2c bus to nr
- mlxreg-hotplug: Remove unused wait.h include
- Move Mellanox platform hotplug driver to platform/mellanox
pmc_atom:
- introduce DEFINE_SHOW_ATTRIBUTE() macro
samsung-laptop:
- Grammar s/are can/can/
silead_dmi:
- Add Teclast X3 Plus tablet support
- Add entry for newer BIOS for Trekstor Surftab 7.0
- Add entry for the Teclast X98 Plus II
- Add entry for the Trekstor Primebook C13
- Add entry for the Chuwi Vi8 tablet
- add entry for Chuwi Hi8 tablet
- Add support for the Onda oBook 20 Plus tablet
- Add touchscreen info for SurfTab twin 10.1
thinkpad_acpi:
- suppress warning about palm detection
- Accept flat mode for type 4 multi mode status
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJaegMmAAoJEKbMaAwKp364TvUH/3D9qNtsbXpZuc3ZMNHjIysU
hdW6hOVfBN0Rk049mjw7nWv/udhWZ/6ChJDlXHX0ZugtNGnRnzbdtWGg4y38pDF1
LRuKjWfDeyMeJ11itD2xcxEaE6YsseWCKGZJ5D3T+sN4+1jgS4RLAa9cUJMl8QAo
xZsT1MKpmGuj5eTLf5GgOVL2yfMZhZHabt3kGRY0eQqNqZBgpJw/GQNI1l6v4nAH
MHPA7Gtj4HXHK8jGviZXpD9tg/iwahiUjGugG4HcxbMcpJ96a8CGyeaXmq2FlfNC
/PpmVvhVVqzLuXKWAI+DZFLAiwIvPpxzVfOKF2Lty5Rejxf7pdmHq7aCNcALys0=
=cKm9
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v4.16-1' of git://git.infradead.org/linux-platform-drivers-x86
Pull x86 platform-driver updates from Darren Hart:
"New model support added for Dell, Ideapad, Acer, Asus, Thinkpad, and
GPD laptops. Improvements to the common intel-vbtn driver, including
tablet mode, rotate, and front button support. Intel CPU support added
for Cannonlake and platform support for Dollar Cove power button.
Overhaul of the mellanox platform driver, creating a new
platform/mellanox directory for the newly multi-architecture regmap
interface.
Significant Intel PMC update with CannonLake support, Coffeelake
update, CPUID enumeration, module support, new read64 API, refactoring
and cleanups.
Revert the apple-gmux iGP IO lock, addressing reported issues with
non-binary drivers, leaving Nvidia binary driver users to comment out
conflicting code.
Miscellaneous fixes and cleanups"
* tag 'platform-drivers-x86-v4.16-1' of git://git.infradead.org/linux-platform-drivers-x86: (81 commits)
platform/x86: mlx-platform: Fix an ERR_PTR vs NULL issue
platform/x86: intel_pmc_core: Special case for Coffeelake
platform/x86: intel_pmc_core: Add CannonLake PCH support
x86/cpu: Add Cannonlake to Intel family
platform/x86: intel_pmc_core: Read base address from LPIT
ACPI / LPIT: Export lpit_read_residency_count_address()
platform/x86: intel-vbtn: Replace License by SDPX identifier
platform/x86: intel-vbtn: Remove redundant inclusions
platform/x86: intel-vbtn: Support tablet mode switch
platform/x86: dell-laptop: Allocate buffer on heap rather than globally
platform/x86: intel_pmc_core: Remove unused header file
platform/x86: mlx-platform: Add hotplug device unregister to error path
platform/x86: mlx-platform: fix module aliases
platform/mellanox: mlxreg-hotplug: Add check for negative adapter number
platform/x86: mlx-platform: Add IO access verification callbacks
platform/x86: mlx-platform: Document pdev_hotplug field
platform/x86: mlx-platform: Allow compilation for 32 bit arch
platform/mellanox: mlxreg-hotplug: Enable building for ARM
platform/mellanox: mlxreg-hotplug: Modify to use a regmap interface
platform/mellanox: Group create/destroy with attribute functions
...
* Require struct page by default for filesystem DAX to remove a number of
surprising failure cases. This includes failures with direct I/O, gdb and
fork(2).
* Add support for the new Platform Capabilities Structure added to the NFIT in
ACPI 6.2a. This new table tells us whether the platform supports flushing
of CPU and memory controller caches on unexpected power loss events.
* Revamp vmem_altmap and dev_pagemap handling to clean up code and better
support future future PCI P2P uses.
* Deprecate the ND_IOCTL_SMART_THRESHOLD command whose payload has become
out-of-sync with recent versions of the NVDIMM_FAMILY_INTEL spec, and
instead rely on the generic ND_CMD_CALL approach used by the two other IOCTL
families, NVDIMM_FAMILY_{HPE,MSFT}.
* Enhance nfit_test so we can test some of the new things added in version 1.6
of the DSM specification. This includes testing firmware download and
simulating the Last Shutdown State (LSS) status.
-----BEGIN PGP SIGNATURE-----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=MIMX
-----END PGP SIGNATURE-----
Merge tag 'libnvdimm-for-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm updates from Ross Zwisler:
- Require struct page by default for filesystem DAX to remove a number
of surprising failure cases. This includes failures with direct I/O,
gdb and fork(2).
- Add support for the new Platform Capabilities Structure added to the
NFIT in ACPI 6.2a. This new table tells us whether the platform
supports flushing of CPU and memory controller caches on unexpected
power loss events.
- Revamp vmem_altmap and dev_pagemap handling to clean up code and
better support future future PCI P2P uses.
- Deprecate the ND_IOCTL_SMART_THRESHOLD command whose payload has
become out-of-sync with recent versions of the NVDIMM_FAMILY_INTEL
spec, and instead rely on the generic ND_CMD_CALL approach used by
the two other IOCTL families, NVDIMM_FAMILY_{HPE,MSFT}.
- Enhance nfit_test so we can test some of the new things added in
version 1.6 of the DSM specification. This includes testing firmware
download and simulating the Last Shutdown State (LSS) status.
* tag 'libnvdimm-for-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (37 commits)
libnvdimm, namespace: remove redundant initialization of 'nd_mapping'
acpi, nfit: fix register dimm error handling
libnvdimm, namespace: make min namespace size 4K
tools/testing/nvdimm: force nfit_test to depend on instrumented modules
libnvdimm/nfit_test: adding support for unit testing enable LSS status
libnvdimm/nfit_test: add firmware download emulation
nfit-test: Add platform cap support from ACPI 6.2a to test
libnvdimm: expose platform persistence attribute for nd_region
acpi: nfit: add persistent memory control flag for nd_region
acpi: nfit: Add support for detect platform CPU cache flush on power loss
device-dax: Fix trailing semicolon
libnvdimm, btt: fix uninitialized err_lock
dax: require 'struct page' by default for filesystem dax
ext2: auto disable dax instead of failing mount
ext4: auto disable dax instead of failing mount
mm, dax: introduce pfn_t_special()
mm: Fix devm_memremap_pages() collision handling
mm: Fix memory size alignment in devm_memremap_pages_release()
memremap: merge find_dev_pagemap into get_dev_pagemap
memremap: change devm_memremap_pages interface to use struct dev_pagemap
...
The i2c touchpad on Dell XPS 9570 and Precision M5530 doesn't work out
of box.
The touchpad relies on its _INI method to update its _HID value from
XXXX0000 to SYNA2393.
Also, the _STA relies on value of I2CN to report correct status.
Set acpi_gbl_parse_table_as_term_list so the value of I2CN can be
correctly set up, and _INI can get run. The ACPI table in this machine
is designed to get parsed this way.
Also, change the quirk table to a more generic name.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=198515
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
including tool signons.
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Export lpit_read_residency_count_address(), so that it can be used from
drivers built as module. With the recent changes, the builtin_pci
functionality of the intel_pmc_core driver is removed and now it can be
built as a module to read this exported interface to calculate the PMC base
address.
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: Len Brown <lenb@kernel.org>
Cc: linux-acpi@vger.kernel.org
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Tested-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The ACPI idle driver will default to ACPI_CSTATE_HALT for C1 if a _CST
object for C1 is not defined. However, the description will not be set,
so users will see "<null>" when reading the description from sysfs.
Set the C1 state description when defaulting to ACPI_CSTATE_HALT.
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Same issue as other Asus laptops, ACPI incorrectly reports discharging
when battery is full and AC is plugged.
Use the same battery quirk can workaround the issue.
Link: https://bugs.launchpad.net/bugs/1661876
Link: https://bugs.launchpad.net/bugs/1745032
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The following warning was triggered after resumed from S3 -
if all the nonboot CPUs were put offline before suspend:
[ 1840.329515] unchecked MSR access error: RDMSR from 0x771 at rIP: 0xffffffff86061e3a (native_read_msr+0xa/0x30)
[ 1840.329516] Call Trace:
[ 1840.329521] __rdmsr_on_cpu+0x33/0x50
[ 1840.329525] generic_exec_single+0x81/0xb0
[ 1840.329527] smp_call_function_single+0xd2/0x100
[ 1840.329530] ? acpi_ds_result_pop+0xdd/0xf2
[ 1840.329532] ? acpi_ds_create_operand+0x215/0x23c
[ 1840.329534] rdmsrl_on_cpu+0x57/0x80
[ 1840.329536] ? cpumask_next+0x1b/0x20
[ 1840.329538] ? rdmsrl_on_cpu+0x57/0x80
[ 1840.329541] intel_pstate_update_perf_limits+0xf3/0x220
[ 1840.329544] ? notifier_call_chain+0x4a/0x70
[ 1840.329546] intel_pstate_set_policy+0x4e/0x150
[ 1840.329548] cpufreq_set_policy+0xcd/0x2f0
[ 1840.329550] cpufreq_update_policy+0xb2/0x130
[ 1840.329552] ? cpufreq_update_policy+0x130/0x130
[ 1840.329556] acpi_processor_ppc_has_changed+0x65/0x80
[ 1840.329558] acpi_processor_notify+0x80/0x100
[ 1840.329561] acpi_ev_notify_dispatch+0x44/0x5c
[ 1840.329563] acpi_os_execute_deferred+0x14/0x20
[ 1840.329565] process_one_work+0x193/0x3c0
[ 1840.329567] worker_thread+0x35/0x3b0
[ 1840.329569] kthread+0x125/0x140
[ 1840.329571] ? process_one_work+0x3c0/0x3c0
[ 1840.329572] ? kthread_park+0x60/0x60
[ 1840.329575] ? do_syscall_64+0x67/0x180
[ 1840.329577] ret_from_fork+0x25/0x30
[ 1840.329585] unchecked MSR access error: WRMSR to 0x774 (tried to write 0x0000000000000000) at rIP: 0xffffffff86061f78 (native_write_msr+0x8/0x30)
[ 1840.329586] Call Trace:
[ 1840.329587] __wrmsr_on_cpu+0x37/0x40
[ 1840.329589] generic_exec_single+0x81/0xb0
[ 1840.329592] smp_call_function_single+0xd2/0x100
[ 1840.329594] ? acpi_ds_create_operand+0x215/0x23c
[ 1840.329595] ? cpumask_next+0x1b/0x20
[ 1840.329597] wrmsrl_on_cpu+0x57/0x70
[ 1840.329598] ? rdmsrl_on_cpu+0x57/0x80
[ 1840.329599] ? wrmsrl_on_cpu+0x57/0x70
[ 1840.329602] intel_pstate_hwp_set+0xd3/0x150
[ 1840.329604] intel_pstate_set_policy+0x119/0x150
[ 1840.329606] cpufreq_set_policy+0xcd/0x2f0
[ 1840.329607] cpufreq_update_policy+0xb2/0x130
[ 1840.329610] ? cpufreq_update_policy+0x130/0x130
[ 1840.329613] acpi_processor_ppc_has_changed+0x65/0x80
[ 1840.329615] acpi_processor_notify+0x80/0x100
[ 1840.329617] acpi_ev_notify_dispatch+0x44/0x5c
[ 1840.329619] acpi_os_execute_deferred+0x14/0x20
[ 1840.329620] process_one_work+0x193/0x3c0
[ 1840.329622] worker_thread+0x35/0x3b0
[ 1840.329624] kthread+0x125/0x140
[ 1840.329625] ? process_one_work+0x3c0/0x3c0
[ 1840.329626] ? kthread_park+0x60/0x60
[ 1840.329628] ? do_syscall_64+0x67/0x180
[ 1840.329631] ret_from_fork+0x25/0x30
This is because if there's only one online CPU, the MSR_PM_ENABLE
(package wide)can not be enabled after resumed, due to
intel_pstate_hwp_enable() will only be invoked on AP's online
process after resumed - if there's no AP online, the HWP remains
disabled after resumed (BIOS has disabled it in S3). Then if
there comes a _PPC change notification which touches HWP register
during this stage, the warning is triggered.
Since we don't call acpi_processor_register_performance() when
HWP is enabled, the pr->performance will be NULL. When this is
NULL we don't need to do _PPC change notification.
Reported-by: Doug Smythies <dsmythies@telus.net>
Suggested-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Yu Chen <yu.c.chen@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The acpi_get_bus_status wrapper for acpi_bus_get_status_handle has some
code to handle certain device quirks, in some cases we also need this
quirk handling for the initial _STA call.
Specifically on some devices calling _STA before all _DEP dependencies
are met results in errors like these:
[ 0.123579] ACPI Error: No handler for Region [ECRM] (00000000ba9edc4c)
[GenericSerialBus] (20170831/evregion-166)
[ 0.123601] ACPI Error: Region GenericSerialBus (ID=9) has no handler
(20170831/exfldio-299)
[ 0.123618] ACPI Error: Method parse/execution failed
\_SB.I2C1.BAT1._STA, AE_NOT_EXIST (20170831/psparse-550)
acpi_get_bus_status already has code to avoid this, so by using it we
also silence these errors from the initial _STA call.
Note that in order for the acpi_get_bus_status handling for this to work,
we initialize dep_unmet to 1 until acpi_device_dep_initialize gets called,
this means that battery devices will be instantiated with an initial
status of 0. This is not a problem, acpi_bus_attach will get called soon
after the instantiation anyways and it will update the status as first
point of order.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The battery code uses acpi_device->dep_unmet to check for unmet deps and
if there are unmet deps it does not bind to the device to avoid errors
about missing OpRegions when calling ACPI methods on the device.
The missing OpRegions when there are unmet deps problem also applies to
the _STA method of some battery devices and calling it too early results
in errors like these:
[ 0.123579] ACPI Error: No handler for Region [ECRM] (00000000ba9edc4c)
[GenericSerialBus] (20170831/evregion-166)
[ 0.123601] ACPI Error: Region GenericSerialBus (ID=9) has no handler
(20170831/exfldio-299)
[ 0.123618] ACPI Error: Method parse/execution failed
\_SB.I2C1.BAT1._STA, AE_NOT_EXIST (20170831/psparse-550)
This commit fixes these errors happening when acpi_get_bus_status gets
called by checking dep_unmet for battery devices and reporting a status
of 0 until all dependencies are met.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Some modular drivers need this, export it.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Assign true or false to boolean variables instead of an integer value.
This issue was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
A NULL pointer reference kernel bug was observed when
acpi_nfit_add_dimm() called in acpi_nfit_register_dimms() failed. This
error path does not set nfit_mem->nvdimm, but the 2nd
list_for_each_entry() loop in the function assumes it's always set. Add
a check to nfit_mem->nvdimm.
Cc: <stable@vger.kernel.org>
Fixes: ba9c8dd3c2 ("acpi, nfit: add dimm device notification support")
Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Propagate the ADR attribute flag from the NFIT platform capabilities
sub-table to nd_region.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
In ACPI 6.2a the platform capability structure has been added to the NFIT
tables. That provides software the ability to determine whether a system
supports the auto flushing of CPU caches on power loss. If the capability
is supported, we do not need to do dax_flush(). Plumbing the path to set the
property on per region from the NFIT tables.
This patch depends on the ACPI NFIT 6.2a platform capabilities support code
in include/acpi/actbl1.h.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Here is the set of "big" driver core patches for 4.16-rc1.
The majority of the work here is in the firmware subsystem, with reworks
to try to attempt to make the code easier to handle in the long run, but
no functional change. There's also some tree-wide sysfs attribute
fixups with lots of acks from the various subsystem maintainers, as well
as a handful of other normal fixes and changes.
And finally, some license cleanups for the driver core and sysfs code.
All have been in linux-next for a while with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWnLvPw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynNzACgkzjPoBytJWbpWFt6SR6L33/u4kEAnRFvVCGL
s6ygQPQhZIjKk2Lxa2hC
=Zihy
-----END PGP SIGNATURE-----
Merge tag 'driver-core-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the set of "big" driver core patches for 4.16-rc1.
The majority of the work here is in the firmware subsystem, with
reworks to try to attempt to make the code easier to handle in the
long run, but no functional change. There's also some tree-wide sysfs
attribute fixups with lots of acks from the various subsystem
maintainers, as well as a handful of other normal fixes and changes.
And finally, some license cleanups for the driver core and sysfs code.
All have been in linux-next for a while with no reported issues"
* tag 'driver-core-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (48 commits)
device property: Define type of PROPERTY_ENRTY_*() macros
device property: Reuse property_entry_free_data()
device property: Move property_entry_free_data() upper
firmware: Fix up docs referring to FIRMWARE_IN_KERNEL
firmware: Drop FIRMWARE_IN_KERNEL Kconfig option
USB: serial: keyspan: Drop firmware Kconfig options
sysfs: remove DEBUG defines
sysfs: use SPDX identifiers
drivers: base: add coredump driver ops
sysfs: add attribute specification for /sysfs/devices/.../coredump
test_firmware: fix missing unlock on error in config_num_requests_store()
test_firmware: make local symbol test_fw_config static
sysfs: turn WARN() into pr_warn()
firmware: Fix a typo in fallback-mechanisms.rst
treewide: Use DEVICE_ATTR_WO
treewide: Use DEVICE_ATTR_RO
treewide: Use DEVICE_ATTR_RW
sysfs.h: Use octal permissions
component: add debugfs support
bus: simple-pm-bus: convert bool SIMPLE_PM_BUS to tristate
...
This cycle we have small update for:
- updates to xilinx and zynqmp dma controllers
- update reside calculation for rcar controller
- more RSTify fixes for documentation
- Add support for race free transfer termination and updating
for users for that
- Support for new rev of hidma with addition new APIs to
get device match data in ACPI/OF
- Random updates to bunch of other drivers
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=7bH/
-----END PGP SIGNATURE-----
Merge tag 'dmaengine-4.16-rc1' of git://git.infradead.org/users/vkoul/slave-dma
Pull dmaengine updates from Vinod Koul:
"This time is smallish update with updates mainly to drivers:
- updates to xilinx and zynqmp dma controllers
- update reside calculation for rcar controller
- more RSTify fixes for documentation
- add support for race free transfer termination and updating for
users for that
- support for new rev of hidma with addition new APIs to get device
match data in ACPI/OF
- random updates to bunch of other drivers"
* tag 'dmaengine-4.16-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (47 commits)
dmaengine: dmatest: fix container_of member in dmatest_callback
dmaengine: stm32-dmamux: Remove unnecessary platform_get_resource() error check
dmaengine: sprd: statify 'sprd_dma_prep_dma_memcpy'
dmaengine: qcom_hidma: simplify DT resource parsing
dmaengine: xilinx_dma: Free BD consistent memory
dmaengine: xilinx_dma: Fix warning variable prev set but not used
dmaengine: xilinx_dma: properly configure the SG mode bit in the driver for cdma
dmaengine: doc: format struct fields using monospace
dmaengine: doc: fix bullet list formatting
dmaengine: ti-dma-crossbar: Fix event mapping for TPCC_EVT_MUX_60_63
dmaengine: cppi41: Fix channel queues array size check
dmaengine: imx-sdma: Add MODULE_FIRMWARE
dmaengine: xilinx_dma: Fix typos
dmaengine: xilinx_dma: Differentiate probe based on the ip type
dmaengine: xilinx_dma: fix style issues from checkpatch
dmaengine: xilinx_dma: Fix kernel doc warnings
dmaengine: xilinx_dma: Fix race condition in the driver for multiple descriptor scenario
dmaeninge: xilinx_dma: Fix bug in multiple frame stores scenario in vdma
dmaengine: xilinx_dma: Check for channel idle state before submitting dma descriptor
dmaengine: zynqmp_dma: Fix race condition in the probe
...
Pull poll annotations from Al Viro:
"This introduces a __bitwise type for POLL### bitmap, and propagates
the annotations through the tree. Most of that stuff is as simple as
'make ->poll() instances return __poll_t and do the same to local
variables used to hold the future return value'.
Some of the obvious brainos found in process are fixed (e.g. POLLIN
misspelled as POLL_IN). At that point the amount of sparse warnings is
low and most of them are for genuine bugs - e.g. ->poll() instance
deciding to return -EINVAL instead of a bitmap. I hadn't touched those
in this series - it's large enough as it is.
Another problem it has caught was eventpoll() ABI mess; select.c and
eventpoll.c assumed that corresponding POLL### and EPOLL### were
equal. That's true for some, but not all of them - EPOLL### are
arch-independent, but POLL### are not.
The last commit in this series separates userland POLL### values from
the (now arch-independent) kernel-side ones, converting between them
in the few places where they are copied to/from userland. AFAICS, this
is the least disruptive fix preserving poll(2) ABI and making epoll()
work on all architectures.
As it is, it's simply broken on sparc - try to give it EPOLLWRNORM and
it will trigger only on what would've triggered EPOLLWRBAND on other
architectures. EPOLLWRBAND and EPOLLRDHUP, OTOH, are never triggered
at all on sparc. With this patch they should work consistently on all
architectures"
* 'misc.poll' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (37 commits)
make kernel-side POLL... arch-independent
eventpoll: no need to mask the result of epi_item_poll() again
eventpoll: constify struct epoll_event pointers
debugging printk in sg_poll() uses %x to print POLL... bitmap
annotate poll(2) guts
9p: untangle ->poll() mess
->si_band gets POLL... bitmap stored into a user-visible long field
ring_buffer_poll_wait() return value used as return value of ->poll()
the rest of drivers/*: annotate ->poll() instances
media: annotate ->poll() instances
fs: annotate ->poll() instances
ipc, kernel, mm: annotate ->poll() instances
net: annotate ->poll() instances
apparmor: annotate ->poll() instances
tomoyo: annotate ->poll() instances
sound: annotate ->poll() instances
acpi: annotate ->poll() instances
crypto: annotate ->poll() instances
block: annotate ->poll() instances
x86: annotate ->poll() instances
...
Pull siginfo cleanups from Eric Biederman:
"Long ago when 2.4 was just a testing release copy_siginfo_to_user was
made to copy individual fields to userspace, possibly for efficiency
and to ensure initialized values were not copied to userspace.
Unfortunately the design was complex, it's assumptions unstated, and
humans are fallible and so while it worked much of the time that
design failed to ensure unitialized memory is not copied to userspace.
This set of changes is part of a new design to clean up siginfo and
simplify things, and hopefully make the siginfo handling robust enough
that a simple inspection of the code can be made to ensure we don't
copy any unitializied fields to userspace.
The design is to unify struct siginfo and struct compat_siginfo into a
single definition that is shared between all architectures so that
anyone adding to the set of information shared with struct siginfo can
see the whole picture. Hopefully ensuring all future si_code
assignments are arch independent.
The design is to unify copy_siginfo_to_user32 and
copy_siginfo_from_user32 so that those function are complete and cope
with all of the different cases documented in signinfo_layout. I don't
think there was a single implementation of either of those functions
that was complete and correct before my changes unified them.
The design is to introduce a series of helpers including
force_siginfo_fault that take the values that are needed in struct
siginfo and build the siginfo structure for their callers. Ensuring
struct siginfo is built correctly.
The remaining work for 4.17 (unless someone thinks it is post -rc1
material) is to push usage of those helpers down into the
architectures so that architecture specific code will not need to deal
with the fiddly work of intializing struct siginfo, and then when
struct siginfo is guaranteed to be fully initialized change copy
siginfo_to_user into a simple wrapper around copy_to_user.
Further there is work in progress on the issues that have been
documented requires arch specific knowledge to sort out.
The changes below fix or at least document all of the issues that have
been found with siginfo generation. Then proceed to unify struct
siginfo the 32 bit helpers that copy siginfo to and from userspace,
and generally clean up anything that is not arch specific with regards
to siginfo generation.
It is a lot but with the unification you can of siginfo you can
already see the code reduction in the kernel"
* 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (45 commits)
signal/memory-failure: Use force_sig_mceerr and send_sig_mceerr
mm/memory_failure: Remove unused trapno from memory_failure
signal/ptrace: Add force_sig_ptrace_errno_trap and use it where needed
signal/powerpc: Remove unnecessary signal_code parameter of do_send_trap
signal: Helpers for faults with specialized siginfo layouts
signal: Add send_sig_fault and force_sig_fault
signal: Replace memset(info,...) with clear_siginfo for clarity
signal: Don't use structure initializers for struct siginfo
signal/arm64: Better isolate the COMPAT_TASK portion of ptrace_hbptriggered
ptrace: Use copy_siginfo in setsiginfo and getsiginfo
signal: Unify and correct copy_siginfo_to_user32
signal: Remove the code to clear siginfo before calling copy_siginfo_from_user32
signal: Unify and correct copy_siginfo_from_user32
signal/blackfin: Remove pointless UID16_SIGINFO_COMPAT_NEEDED
signal/blackfin: Move the blackfin specific si_codes to asm-generic/siginfo.h
signal/tile: Move the tile specific si_codes to asm-generic/siginfo.h
signal/frv: Move the frv specific si_codes to asm-generic/siginfo.h
signal/ia64: Move the ia64 specific si_codes to asm-generic/siginfo.h
signal/powerpc: Remove redefinition of NSIGTRAP on powerpc
signal: Move addr_lsb into the _sigfault union for clarity
...
Pull x86 timer updates from Thomas Gleixner:
"A small set of updates for x86 specific timers:
- Mark TSC invariant on a subset of Centaur CPUs
- Allow TSC calibration without PIT on mobile platforms which lack
legacy devices"
* 'x86-timers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/centaur: Mark TSC invariant
x86/tsc: Introduce early tsc clocksource
x86/time: Unconditionally register legacy timer interrupt
x86/tsc: Allow TSC calibration without PIT
Pull x86 platform updates from Thomas Gleixner:
"The platform support for x86 contains the following updates:
- A set of updates for the UV platform to support new CPUs and to fix
some of the UV4A BAU MRRs
- The initial platform support for the jailhouse hypervisor to allow
native Linux guests (inmates) in non-root cells.
- A fix for the PCI initialization on Intel MID platforms"
* 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
x86/jailhouse: Respect pci=lastbus command line settings
x86/jailhouse: Set X86_FEATURE_TSC_KNOWN_FREQ
x86/platform/intel-mid: Move PCI initialization to arch_init()
x86/platform/uv/BAU: Replace hard-coded values with MMR definitions
x86/platform/UV: Fix UV4A BAU MMRs
x86/platform/UV: Fix GAM MMR references in the UV x2apic code
x86/platform/UV: Fix GAM MMR changes in UV4A
x86/platform/UV: Add references to access fixed UV4A HUB MMRs
x86/platform/UV: Fix UV4A support on new Intel Processors
x86/platform/UV: Update uv_mmrs.h to prepare for UV4A fixes
x86/jailhouse: Add PCI dependency
x86/jailhouse: Hide x2apic code when CONFIG_X86_X2APIC=n
x86/jailhouse: Initialize PCI support
x86/jailhouse: Wire up IOAPIC for legacy UART ports
x86/jailhouse: Halt instead of failing to restart
x86/jailhouse: Silence ACPI warning
x86/jailhouse: Avoid access of unsupported platform resources
x86/jailhouse: Set up timekeeping
x86/jailhouse: Enable PMTIMER
x86/jailhouse: Enable APIC and SMP support
...
- Update the ACPICA kernel code to upstream revision 20171215 including:
* Support for ACPI 6.0A changes in the NFIT table (Bob Moore).
* Local 64-bit divide in string conversions (Bob Moore).
* Fix for a regression in acpi_evaluate_object_type() (Bob Moore).
* Fixes for memory leaks during package object resolution (Bob Moore).
* Deployment of safe version of strncpy() (Bob Moore).
* Debug and messaging updates (Bob Moore).
* Support for PDTT, SDEV, TPM2 tables in iASL and tools (Bob Moore).
* Null pointer dereference avoidance in Op and cleanups (Colin Ian King).
* Fix for memory leak from building prefixed pathname (Erik Schmauss).
* Coding style fixes, disassembler and compiler updates (Hanjun Guo,
Erik Schmauss).
* Additional PPTT flags from ACPI 6.2 (Jeremy Linton).
* Fix for an off-by-one error in acpi_get_timer_duration() (Jung-uk Kim).
* Infinite loop detection timeout and utilities cleanups (Lv Zheng).
* Windows 10 version 1607 and 1703 OSI strings (Mario Limonciello).
- Update ACPICA information in MAINTAINERS to reflect the current
status of ACPICA maintenance and rename a local variable in one
function to match the corresponding upstream code (Rafael Wysocki).
- Clean up ACPI-related initialization on x86 (Andy Shevchenko).
- Add support for Intel Merrifield to the ACPI GPIO code (Andy
Shevchenko).
- Clean up ACPI PMIC drivers (Andy Shevchenko, Arvind Yadav).
- Fix the ACPI Generic Event Device (GED) driver to free IRQs on
shutdown and clean up the PCI IRQ Link driver (Sinan Kaya).
- Make the GHES code call into the AER driver on all errors and
clean up the ACPI APEI code (Colin Ian King, Tyler Baicar).
- Make the IA64 ACPI NUMA code parse all SRAT entries (Ganapatrao
Kulkarni).
- Add a lid switch blacklist to the ACPI button driver and make it
print extra debug messages on lid events (Hans de Goede).
- Add quirks for Asus GL502VSK and UX305LA to the ACPI battery
driver and clean it up somewhat (Bjørn Mork, Kai-Heng Feng).
- Add device link for CHT SD card dependency on I2C to the ACPI
LPSS (Intel SoCs) driver and make it avoid creating platform
device objects for devices without MMIO resources (Adrian Hunter,
Hans de Goede).
- Fix the ACPI GPE mask kernel command line parameter handling
(Prarit Bhargava).
- Fix the handling of (incorrectly exposed) backlight interfaces
without LCD (Hans de Goede).
- Fix the usage of debugfs_create_*() in the ACPI EC driver (Geert
Uytterhoeven).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=/eCQ
-----END PGP SIGNATURE-----
Merge tag 'acpi-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"The majority of this is an update of the ACPICA kernel code to
upstream revision 20171215 with a cosmetic change and a maintainers
information update on top of it.
The rest is mostly some minor fixes and cleanups in the ACPI drivers
and cleanups to initialization on x86.
Specifics:
- Update the ACPICA kernel code to upstream revision 20171215 including:
* Support for ACPI 6.0A changes in the NFIT table (Bob Moore)
* Local 64-bit divide in string conversions (Bob Moore)
* Fix for a regression in acpi_evaluate_object_type() (Bob Moore)
* Fixes for memory leaks during package object resolution (Bob
Moore)
* Deployment of safe version of strncpy() (Bob Moore)
* Debug and messaging updates (Bob Moore)
* Support for PDTT, SDEV, TPM2 tables in iASL and tools (Bob
Moore)
* Null pointer dereference avoidance in Op and cleanups (Colin Ian
King)
* Fix for memory leak from building prefixed pathname (Erik
Schmauss)
* Coding style fixes, disassembler and compiler updates (Hanjun
Guo, Erik Schmauss)
* Additional PPTT flags from ACPI 6.2 (Jeremy Linton)
* Fix for an off-by-one error in acpi_get_timer_duration()
(Jung-uk Kim)
* Infinite loop detection timeout and utilities cleanups (Lv
Zheng)
* Windows 10 version 1607 and 1703 OSI strings (Mario
Limonciello)
- Update ACPICA information in MAINTAINERS to reflect the current
status of ACPICA maintenance and rename a local variable in one
function to match the corresponding upstream code (Rafael Wysocki)
- Clean up ACPI-related initialization on x86 (Andy Shevchenko)
- Add support for Intel Merrifield to the ACPI GPIO code (Andy
Shevchenko)
- Clean up ACPI PMIC drivers (Andy Shevchenko, Arvind Yadav)
- Fix the ACPI Generic Event Device (GED) driver to free IRQs on
shutdown and clean up the PCI IRQ Link driver (Sinan Kaya)
- Make the GHES code call into the AER driver on all errors and clean
up the ACPI APEI code (Colin Ian King, Tyler Baicar)
- Make the IA64 ACPI NUMA code parse all SRAT entries (Ganapatrao
Kulkarni)
- Add a lid switch blacklist to the ACPI button driver and make it
print extra debug messages on lid events (Hans de Goede)
- Add quirks for Asus GL502VSK and UX305LA to the ACPI battery driver
and clean it up somewhat (Bjørn Mork, Kai-Heng Feng)
- Add device link for CHT SD card dependency on I2C to the ACPI LPSS
(Intel SoCs) driver and make it avoid creating platform device
objects for devices without MMIO resources (Adrian Hunter, Hans de
Goede)
- Fix the ACPI GPE mask kernel command line parameter handling
(Prarit Bhargava)
- Fix the handling of (incorrectly exposed) backlight interfaces
without LCD (Hans de Goede)
- Fix the usage of debugfs_create_*() in the ACPI EC driver (Geert
Uytterhoeven)"
* tag 'acpi-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (62 commits)
ACPI/PCI: pci_link: reduce verbosity when IRQ is enabled
ACPI / LPSS: Do not instiate platform_dev for devs without MMIO resources
ACPI / PMIC: Convert to use builtin_platform_driver() macro
ACPI / x86: boot: Propagate error code in acpi_gsi_to_irq()
ACPICA: Update version to 20171215
ACPICA: trivial style fix, no functional change
ACPICA: Fix a couple memory leaks during package object resolution
ACPICA: Recognize the Windows 10 version 1607 and 1703 OSI strings
ACPICA: DT compiler: prevent error if optional field at the end of table is not present
ACPICA: Rename a global variable, no functional change
ACPICA: Create and deploy safe version of strncpy
ACPICA: Cleanup the global variables and update comments
ACPICA: Debugger: fix slight indentation issue
ACPICA: Fix a regression in the acpi_evaluate_object_type() interface
ACPICA: Update for a few debug output statements
ACPICA: Debug output, no functional change
ACPI: EC: Fix debugfs_create_*() usage
ACPI / video: Default lcd_only to true on Win8-ready and newer machines
ACPI / x86: boot: Don't setup SCI on HW-reduced platforms
ACPI / x86: boot: Use INVALID_ACPI_IRQ instead of 0 for acpi_sci_override_gsi
...
- Define a PM driver flag allowing drivers to request that their
devices be left in suspend after system-wide transitions to the
working state if possible and add support for it to the PCI bus
type and the ACPI PM domain (Rafael Wysocki).
- Make the PM core carry out optimizations for devices with driver
PM flags set in some cases and make a few drivers set those flags
(Rafael Wysocki).
- Fix and clean up wrapper routines allowing runtime PM device
callbacks to be re-used for system-wide PM, change the generic
power domains (genpd) framework to stop using those routines
incorrectly and fix up a driver depending on that behavior of
genpd (Rafael Wysocki, Ulf Hansson, Geert Uytterhoeven).
- Fix and clean up the PM core's device wakeup framework and
re-factor system-wide PM core code related to device wakeup
(Rafael Wysocki, Ulf Hansson, Brian Norris).
- Make more x86-based systems use the Low Power Sleep S0 _DSM
interface by default (to fix power button wakeup from
suspend-to-idle on Surface Pro3) and add a kernel command line
switch to tell it to ignore the system sleep blacklist in the
ACPI core (Rafael Wysocki).
- Fix a race condition related to cpufreq governor module removal
and clean up the governor management code in the cpufreq core
(Rafael Wysocki).
- Drop the unused generic code related to the handling of the static
power energy usage model in the CPU cooling thermal driver along
with the corresponding documentation (Viresh Kumar).
- Add mt2712 support to the Mediatek cpufreq driver (Andrew-sh Cheng).
- Add a new operating point to the imx6ul and imx6q cpufreq drivers
and switch the latter to using clk_bulk_get() (Anson Huang, Dong
Aisheng).
- Add support for multiple regulators to the TI cpufreq driver along
with a new DT binding related to that and clean up that driver
somewhat (Dave Gerlach).
- Fix a powernv cpufreq driver regression leading to incorrect CPU
frequency reporting, fix that driver to deal with non-continguous
P-states correctly and clean it up (Gautham Shenoy, Shilpasri Bhat).
- Add support for frequency scaling on Armada 37xx SoCs through the
generic DT cpufreq driver (Gregory CLEMENT).
- Fix error code paths in the mvebu cpufreq driver (Gregory CLEMENT).
- Fix a transition delay setting regression in the longhaul cpufreq
driver (Viresh Kumar).
- Add Skylake X (server) support to the intel_pstate cpufreq driver
and clean up that driver somewhat (Srinivas Pandruvada).
- Clean up the cpufreq statistics collection code (Viresh Kumar).
- Drop cluster terminology and dependency on physical_package_id
from the PSCI driver and drop dependency on arm_big_little from
the SCPI cpufreq driver (Sudeep Holla).
- Add support for system-wide suspend and resume to the RAPL power
capping driver and drop a redundant semicolon from it (Zhen Han,
Luis de Bethencourt).
- Make SPI domain validation (in the SCSI SPI transport driver) and
system-wide suspend mutually exclusive as they rely on the same
underlying mechanism and cannot be carried out at the same time
(Bart Van Assche).
- Fix the computation of the amount of memory to preallocate in the
hibernation core and clean up one function in there (Rainer Fiebig,
Kyungsik Lee).
- Prepare the Operating Performance Points (OPP) framework for being
used with power domains and clean up one function in it (Viresh
Kumar, Wei Yongjun).
- Clean up the generic sysfs interface for device PM (Andy Shevchenko).
- Fix several minor issues in power management frameworks and clean
them up a bit (Arvind Yadav, Bjorn Andersson, Geert Uytterhoeven,
Gustavo Silva, Julia Lawall, Luis de Bethencourt, Paul Gortmaker,
Sergey Senozhatsky, gaurav jindal).
- Make it easier to disable PM via Kconfig (Mark Brown).
- Clean up the cpupower and intel_pstate_tracer utilities (Doug
Smythies, Laura Abbott).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=dnb7
-----END PGP SIGNATURE-----
Merge tag 'pm-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"This includes some infrastructure changes in the PM core, mostly
related to integration between runtime PM and system-wide suspend and
hibernation, plus some driver changes depending on them and fixes for
issues in that area which have become quite apparent recently.
Also included are changes making more x86-based systems use the Low
Power Sleep S0 _DSM interface by default, which turned out to be
necessary to handle power button wakeups from suspend-to-idle on
Surface Pro3.
On the cpufreq front we have fixes and cleanups in the core, some new
hardware support, driver updates and the removal of some unused code
from the CPU cooling thermal driver.
Apart from this, the Operating Performance Points (OPP) framework is
prepared to be used with power domains in the future and there is a
usual bunch of assorted fixes and cleanups.
Specifics:
- Define a PM driver flag allowing drivers to request that their
devices be left in suspend after system-wide transitions to the
working state if possible and add support for it to the PCI bus
type and the ACPI PM domain (Rafael Wysocki).
- Make the PM core carry out optimizations for devices with driver PM
flags set in some cases and make a few drivers set those flags
(Rafael Wysocki).
- Fix and clean up wrapper routines allowing runtime PM device
callbacks to be re-used for system-wide PM, change the generic
power domains (genpd) framework to stop using those routines
incorrectly and fix up a driver depending on that behavior of genpd
(Rafael Wysocki, Ulf Hansson, Geert Uytterhoeven).
- Fix and clean up the PM core's device wakeup framework and
re-factor system-wide PM core code related to device wakeup
(Rafael Wysocki, Ulf Hansson, Brian Norris).
- Make more x86-based systems use the Low Power Sleep S0 _DSM
interface by default (to fix power button wakeup from
suspend-to-idle on Surface Pro3) and add a kernel command line
switch to tell it to ignore the system sleep blacklist in the ACPI
core (Rafael Wysocki).
- Fix a race condition related to cpufreq governor module removal and
clean up the governor management code in the cpufreq core (Rafael
Wysocki).
- Drop the unused generic code related to the handling of the static
power energy usage model in the CPU cooling thermal driver along
with the corresponding documentation (Viresh Kumar).
- Add mt2712 support to the Mediatek cpufreq driver (Andrew-sh
Cheng).
- Add a new operating point to the imx6ul and imx6q cpufreq drivers
and switch the latter to using clk_bulk_get() (Anson Huang, Dong
Aisheng).
- Add support for multiple regulators to the TI cpufreq driver along
with a new DT binding related to that and clean up that driver
somewhat (Dave Gerlach).
- Fix a powernv cpufreq driver regression leading to incorrect CPU
frequency reporting, fix that driver to deal with non-continguous
P-states correctly and clean it up (Gautham Shenoy, Shilpasri
Bhat).
- Add support for frequency scaling on Armada 37xx SoCs through the
generic DT cpufreq driver (Gregory CLEMENT).
- Fix error code paths in the mvebu cpufreq driver (Gregory CLEMENT).
- Fix a transition delay setting regression in the longhaul cpufreq
driver (Viresh Kumar).
- Add Skylake X (server) support to the intel_pstate cpufreq driver
and clean up that driver somewhat (Srinivas Pandruvada).
- Clean up the cpufreq statistics collection code (Viresh Kumar).
- Drop cluster terminology and dependency on physical_package_id from
the PSCI driver and drop dependency on arm_big_little from the SCPI
cpufreq driver (Sudeep Holla).
- Add support for system-wide suspend and resume to the RAPL power
capping driver and drop a redundant semicolon from it (Zhen Han,
Luis de Bethencourt).
- Make SPI domain validation (in the SCSI SPI transport driver) and
system-wide suspend mutually exclusive as they rely on the same
underlying mechanism and cannot be carried out at the same time
(Bart Van Assche).
- Fix the computation of the amount of memory to preallocate in the
hibernation core and clean up one function in there (Rainer Fiebig,
Kyungsik Lee).
- Prepare the Operating Performance Points (OPP) framework for being
used with power domains and clean up one function in it (Viresh
Kumar, Wei Yongjun).
- Clean up the generic sysfs interface for device PM (Andy
Shevchenko).
- Fix several minor issues in power management frameworks and clean
them up a bit (Arvind Yadav, Bjorn Andersson, Geert Uytterhoeven,
Gustavo Silva, Julia Lawall, Luis de Bethencourt, Paul Gortmaker,
Sergey Senozhatsky, gaurav jindal).
- Make it easier to disable PM via Kconfig (Mark Brown).
- Clean up the cpupower and intel_pstate_tracer utilities (Doug
Smythies, Laura Abbott)"
* tag 'pm-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (89 commits)
PCI / PM: Remove spurious semicolon
cpufreq: scpi: remove arm_big_little dependency
drivers: psci: remove cluster terminology and dependency on physical_package_id
powercap: intel_rapl: Fix trailing semicolon
dmaengine: rcar-dmac: Make DMAC reinit during system resume explicit
PM / runtime: Allow no callbacks in pm_runtime_force_suspend|resume()
PM / hibernate: Drop unused parameter of enough_swap
PM / runtime: Check ignore_children in pm_runtime_need_not_resume()
PM / runtime: Rework pm_runtime_force_suspend/resume()
PM / genpd: Stop/start devices without pm_runtime_force_suspend/resume()
cpufreq: powernv: Dont assume distinct pstate values for nominal and pmin
cpufreq: intel_pstate: Add Skylake servers support
cpufreq: intel_pstate: Replace bxt_funcs with core_funcs
platform/x86: surfacepro3: Support for wakeup from suspend-to-idle
ACPI / PM: Use Low Power S0 Idle on more systems
PM / wakeup: Print warn if device gets enabled as wakeup source during sleep
PM / domains: Don't skip driver's ->suspend|resume_noirq() callbacks
PM / core: Propagate wakeup_path status flag in __device_suspend_late()
PM / core: Re-structure code for clearing the direct_complete flag
powercap: add suspend and resume mechanism for SOC power limit
...
Centaur CPU has a constant frequency TSC and that TSC does not stop in
C-States. But because the corresponding TSC feature flags are not set for
that CPU, the TSC is treated as not constant frequency and assumed to stop
in C-States, which makes it an unreliable and unusable clock source.
Setting those flags tells the kernel that the TSC is usable, so it will
select it over HPET. The effect of this is that reading time stamps (from
kernel or user space) will be faster and more efficent.
Signed-off-by: davidwang <davidwang@zhaoxin.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: qiyuanwang@zhaoxin.com
Cc: linux-pm@vger.kernel.org
Cc: brucechang@via-alliance.com
Cc: cooperyan@zhaoxin.com
Cc: benjaminpan@viatech.com
Link: https://lkml.kernel.org/r/1516616057-5158-1-git-send-email-davidwang@zhaoxin.com
Today 4 architectures set ARCH_SUPPORTS_MEMORY_FAILURE (arm64, parisc,
powerpc, and x86), while 4 other architectures set __ARCH_SI_TRAPNO
(alpha, metag, sparc, and tile). These two sets of architectures do
not interesect so remove the trapno paramater to remove confusion.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
* acpi-gpio:
gpio: merrifield: Add support of ACPI enabled platforms
ACPI: utils: Introduce acpi_dev_get_first_match_name()
* acpi-button:
ACPI: button: Add a LID switch blacklist and add 1 model to it
ACPI: button: Add a debug message when we're sending a LID event
* acpi-battery:
ACPI / battery: Add quirk for Asus GL502VSK and UX305LA
ACPI: battery: Drop redundant test for failure
* acpi-video:
ACPI / video: Default lcd_only to true on Win8-ready and newer machines
* acpica: (40 commits)
ACPICA: Update version to 20171215
ACPICA: trivial style fix, no functional change
ACPICA: Fix a couple memory leaks during package object resolution
ACPICA: Recognize the Windows 10 version 1607 and 1703 OSI strings
ACPICA: DT compiler: prevent error if optional field at the end of table is not present
ACPICA: Rename a global variable, no functional change
ACPICA: Create and deploy safe version of strncpy
ACPICA: Cleanup the global variables and update comments
ACPICA: Debugger: fix slight indentation issue
ACPICA: Fix a regression in the acpi_evaluate_object_type() interface
ACPICA: Update for a few debug output statements
ACPICA: Debug output, no functional change
ACPICA: Update information in MAINTAINERS
ACPICA: Rename variable to match upstream
ACPICA: Update version to 20171110
ACPICA: ACPI 6.2: Additional PPTT flags
ACPICA: Update linkage for get mutex name interface
ACPICA: Update mutex error messages, no functional change
ACPICA: Debugger: add "background" command for method execution
ACPICA: Small typo fix, no functional change
...
* acpi-pm:
platform/x86: surfacepro3: Support for wakeup from suspend-to-idle
ACPI / PM: Use Low Power S0 Idle on more systems
ACPI / PM: Make it possible to ignore the system sleep blacklist
* pm-sleep:
PM / hibernate: Drop unused parameter of enough_swap
block, scsi: Fix race between SPI domain validation and system suspend
PM / sleep: Make lock/unlock_system_sleep() available to kernel modules
PM: hibernate: Do not subtract NR_FILE_MAPPED in minimum_image_size()
* pm-core: (29 commits)
dmaengine: rcar-dmac: Make DMAC reinit during system resume explicit
PM / runtime: Allow no callbacks in pm_runtime_force_suspend|resume()
PM / runtime: Check ignore_children in pm_runtime_need_not_resume()
PM / runtime: Rework pm_runtime_force_suspend/resume()
PM / wakeup: Print warn if device gets enabled as wakeup source during sleep
PM / core: Propagate wakeup_path status flag in __device_suspend_late()
PM / core: Re-structure code for clearing the direct_complete flag
PM: i2c-designware-platdrv: Optimize power management
PM: i2c-designware-platdrv: Use DPM_FLAG_SMART_PREPARE
PM / mfd: intel-lpss: Use DPM_FLAG_SMART_SUSPEND
PCI / PM: Use SMART_SUSPEND and LEAVE_SUSPENDED flags for PCIe ports
PM / wakeup: Add device_set_wakeup_path() helper to control wakeup path
PM / core: Assign the wakeup_path status flag in __device_prepare()
PM / wakeup: Do not fail dev_pm_attach_wake_irq() unnecessarily
PM / core: Direct DPM_FLAG_LEAVE_SUSPENDED handling
PM / core: Direct DPM_FLAG_SMART_SUSPEND optimization
PM / core: Add helpers for subsystem callback selection
PM / wakeup: Drop redundant check from device_init_wakeup()
PM / wakeup: Drop redundant check from device_set_wakeup_enable()
PM / wakeup: only recommend "call"ing device_init_wakeup() once
...
When ACPI Link object is enabled, the message is printed with a warning
prefix. Some test tools are capturing warning and test error types as
errors. Let's reduce the verbosity of success case.
Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
