2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-23 12:43:55 +08:00
Commit Graph

445 Commits

Author SHA1 Message Date
Linus Torvalds
a1a0db36d8 ARM: SoC: late DT updates for v4.11
These updates have been kept in a separate branch mostly because
 they rely on updates to the respective clk drivers to keep the
 shared header files in sync.
 
 This includes two branches for arm64 dt updates, both following up
 on earlier changes for the same platforms that are already merged:
 
 Samsung:
   - add USB3 support in Exynos7
   - minor PM related updates
 
 Amlogic:
   - new machines: WeTek Set-top-boxes
   - various devices added to DT
 
 There are also a couple of bugfixes that trickled in since the
 start of the merge window:
 
 - The moxart_defconfig was not building the intended platform
 - CPU-hotplug was broken on ux500
 - Coresight was broken on Juno (never worked)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIVAwUAWLmRS2CrR//JCVInAQKrkQ//bd8TCGXA0tRwDMEGejtWChZcNkGZDaer
 sNMyE/c1p5+/4euSmf3jW1JsIx4JDtjr0psKeRpgYId8GVdvaYceFbSMJl6o9hDc
 pm3sqb66xEgrWQoSBA2Urz/RhSIrxkYbuTpYbN4teV9I/IFgTUggaBSzfkq3SLRE
 bEVSbCw0S/6t3vJgW4CKCI75+a3NexqImvi8txNwueQQMnDLnOkG97vMUQJgDq0j
 E+CeOk0mvlGF+TiVoAhUxT3YIt8azUTfUVw7CBIRvo/49sUCiETk6xie93FaC7GI
 Tmg9KK+oZhrmqt8PBGkikxQMHATnKrfJbMNi/K6nrxW91ylSkwTN/7jfhSjFDrdI
 4WNB2x3u6KUnQ0XOKVY36gUnV8kJ/2K9pTZpq0K7m4czo8YAid9LumvDnqhPI0Xg
 fXxq3YBx7AfzsdBL3+nQ7AH3tr9Bvt01kMZwYwNgpqtglEBScAgzyrPG/yyTBFq7
 KOkoyNojTaHZHcDtYqSaxYls+2tdeyvYuQJ7QGQ5DJCW99NgbRuFfIUJvgwRPoKt
 13ioIJxDUHmemR6xFURWVH1dPkkqwtJht7us5jcxuxBL9ZhmEb6vophvyxj62zTZ
 8A+PE3cC1azhKph7rVrUl9KEoYZzedwDaTGBNpYz1gN7DxDvWHYINEPB4bBLzYmv
 uWsSYVbV2Qs=
 =A3U6
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC late DT updates from Arnd Bergmann:
 "These updates have been kept in a separate branch mostly because they
  rely on updates to the respective clk drivers to keep the shared
  header files in sync.

  This includes two branches for arm64 dt updates, both following up on
  earlier changes for the same platforms that are already merged:

  Samsung:
   - add USB3 support in Exynos7
   - minor PM related updates

  Amlogic:
   - new machines: WeTek Set-top-boxes
   - various devices added to DT

  There are also a couple of bugfixes that trickled in since the start
  of the merge window:

   - The moxart_defconfig was not building the intended platform
   - CPU-hotplug was broken on ux500
   - Coresight was broken on Juno (never worked)"

* tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (26 commits)
  ARM: deconfig: fix the moxart defconfig
  ARM: ux500: resume the second core properly
  arm64: dts: juno: update definition for programmable replicator
  arm64: dts: exynos: Add regulators for Vbus and Vbus-Boost
  arm64: dts: exynos: Add USB 3.0 controller node for Exynos7
  arm64: dts: exynos: Use macros for pinctrl configuration on Exynos7
  pinctrl: dt-bindings: samsung: Add Exynos7 specific pinctrl macro definitions
  arm64: dts: exynos: Add initial configuration for DISP clocks for TM2/TM2e
  ARM64: dts: meson-gxbb-p200: add ADC laddered keys
  ARM64: dts: meson: meson-gx: add the SAR ADC
  ARM64: dts: meson-gxl: add the pwm_ao_b pin
  ARM64: dts: meson-gx: add the missing pwm_AO_ab node
  clk: gxbb: fix CLKID_ETH defined twice
  ARM64: dts: meson-gxl: rename Nexbox A95x for consistency
  clk: gxbb: add the SAR ADC clocks and expose them
  dt-bindings: amlogic: Add WeTek boards
  ARM64: dts: meson-gxbb: Add support for WeTek Hub and Play
  dt-bindings: vendor-prefix: Add wetek vendor prefix
  ARM64: dts: meson-gxm: Rename q200 and q201 DT files for consistency
  ARM64: dts: meson-gx: Add HDMI HPD/DDC pinctrl nodes
  ...
2017-03-03 16:15:48 -08:00
Arnd Bergmann
d4b80d9aac Merge branch 'next/late' with mainline
* next/late: (25 commits)
  arm64: dts: exynos: Add regulators for Vbus and Vbus-Boost
  arm64: dts: exynos: Add USB 3.0 controller node for Exynos7
  arm64: dts: exynos: Use macros for pinctrl configuration on Exynos7
  pinctrl: dt-bindings: samsung: Add Exynos7 specific pinctrl macro definitions
  arm64: dts: exynos: Add initial configuration for DISP clocks for TM2/TM2e
  ARM64: dts: meson-gxbb-p200: add ADC laddered keys
  ARM64: dts: meson: meson-gx: add the SAR ADC
  ARM64: dts: meson-gxl: add the pwm_ao_b pin
  ARM64: dts: meson-gx: add the missing pwm_AO_ab node
  clk: gxbb: fix CLKID_ETH defined twice
  clk: samsung: exynos5433: Add data for 250MHz and 278MHz PLL rates
  clk: samsung: exynos5433: Add IDs for PHYCLK_MIPIDPHY0_* clocks
  ARM64: dts: meson-gxl: rename Nexbox A95x for consistency
  clk: gxbb: add the SAR ADC clocks and expose them
  dt-bindings: amlogic: Add WeTek boards
  ARM64: dts: meson-gxbb: Add support for WeTek Hub and Play
  dt-bindings: vendor-prefix: Add wetek vendor prefix
  ARM64: dts: meson-gxm: Rename q200 and q201 DT files for consistency
  ARM64: dts: meson-gx: Add HDMI HPD/DDC pinctrl nodes
  ARM64: dts: meson-gxbb-vega-s95: Add LED
  ...

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-03-02 17:52:44 +01:00
Linus Torvalds
ef96152e6a Less anger inducing pull request for 4.11
-----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJYr5aeAAoJEAx081l5xIa+ZK4P/RD3XUsduYqziVFCRQ2n0X8r
 +D92F4peTnSeSq7ZcZvprv+fezUGAHbfsWFs8feYCI5quUO6pEQSPwN+wyGazUi0
 4hUVB/K9Iq7U/Bj7Z/SmsU3NuWJnkNqbmvSFvUdqYK9D/kl+Tnllzap2N4cTzjwu
 GZOObz4n85cx94NqC3qw+7/ptL1X2MhXa+z0MzbkKyas84Bko1LwCSHRHsDKUnJc
 IcSpOcYZ6pSRMIsKH4Kd79Go4vWm7djXT9XL3PwDk2NcXXUOuR+cfdHqYchYaM/O
 iD2hvaSywBcflxSAml5x6vlXraoRd91ZZulgOObXtFfnUXdZB81TVq4uv6LU4Bx3
 jLFixUZuk/TJT+W/8N10l7M6yMIFaTpNoNMc5n4IF5RNNyWba4BKnrI+f+lQiOpY
 mmjIaidb0t5BICnJzCD264RhCEXmP0HaDV+iQQV6y6jJRXfd1bgnOXLKP73JekzB
 TsbDshCoE7UO0dJ7n0LFpXSTQDTYzlazoEp14f2kFBxir5/l7r67nUlnDTvUQfuN
 tSRvpN/s0wqvH3o7zhmpHxyJ/ZasPMQjNCFAuUEbx8L5SKXsua0FubIzN4aVpilb
 XvfdFRWM/lkOT/q+8cGI/TcE3YTqEmALmGxdV/akbdNCiCg6aClyCLRE/DZhgmSQ
 UMFjr9wlHl5Qo/OqLKj0
 =Yjfg
 -----END PGP SIGNATURE-----

Merge tag 'drm-for-v4.11-less-shouty' of git://people.freedesktop.org/~airlied/linux

Pull drm updates from Dave Airlie:
 "This is the main drm pull request for v4.11.

  Nothing too major, the tinydrm and mmu-less support should make
  writing smaller drivers easier for some of the simpler platforms, and
  there are a bunch of documentation updates.

  Intel grew displayport MST audio support which is hopefully useful to
  people, and FBC is on by default for GEN9+ (so people know where to
  look for regressions). AMDGPU has a lot of fixes that would like new
  firmware files installed for some GPUs.

  Other than that it's pretty scattered all over.

  I may have a follow up pull request as I know BenH has a bunch of AST
  rework and fixes and I'd like to get those in once they've been tested
  by AST, and I've got at least one pull request I'm just trying to get
  the author to fix up.

  Core:
   - drm_mm reworked
   - Connector list locking and iterators
   - Documentation updates
   - Format handling rework
   - MMU-less support for fbdev helpers
   - drm_crtc_from_index helper
   - Core CRC API
   - Remove drm_framebuffer_unregister_private
   - Debugfs cleanup
   - EDID/Infoframe fixes
   - Release callback
   - Tinydrm support (smaller drivers for simple hw)

  panel:
   - Add support for some new simple panels

  i915:
   - FBC by default for gen9+
   - Shared dpll cleanups and docs
   - GEN8 powerdomain cleanup
   - DMC support on GLK
   - DP MST audio support
   - HuC loading support
   - GVT init ordering fixes
   - GVT IOMMU workaround fix

  amdgpu/radeon:
   - Power/clockgating improvements
   - Preliminary SR-IOV support
   - TTM buffer priority and eviction fixes
   - SI DPM quirks removed due to firmware fixes
   - Powerplay improvements
   - VCE/UVD powergating fixes
   - Cleanup SI GFX code to match CI/VI
   - Support for > 2 displays on 3/5 crtc asics
   - SI headless fixes

  nouveau:
   - Rework securre boot code in prep for GP10x secure boot
   - Channel recovery improvements
   - Initial power budget code
   - MMU rework preperation

  vmwgfx:
   - Bunch of fixes and cleanups

  exynos:
   - Runtime PM support for MIC driver
   - Cleanups to use atomic helpers
   - UHD Support for TM2/TM2E boards
   - Trigger mode fix for Rinato board

  etnaviv:
   - Shader performance fix
   - Command stream validator fixes
   - Command buffer suballocator

  rockchip:
   - CDN DisplayPort support
   - IOMMU support for arm64 platform

  imx-drm:
   - Fix i.MX5 TV encoder probing
   - Remove lower fb size limits

  msm:
   - Support for HW cursor on MDP5 devices
   - DSI encoder cleanup
   - GPU DT bindings cleanup

  sti:
   - stih410 cleanups
   - Create fbdev at binding
   - HQVDP fixes
   - Remove stih416 chip functionality
   - DVI/HDMI mode selection fixes
   - FPS statistic reporting

  omapdrm:
   - IRQ code cleanup

  dwi-hdmi bridge:
   - Cleanups and fixes

  adv-bridge:
   - Updates for nexus

  sii8520 bridge:
   - Add interlace mode support
   - Rework HDMI and lots of fixes

  qxl:
   - probing/teardown cleanups

  ZTE drm:
   - HDMI audio via SPDIF interface
   - Video Layer overlay plane support
   - Add TV encoder output device

  atmel-hlcdc:
   - Rework fbdev creation logic

  tegra:
   - OF node fix

  fsl-dcu:
   - Minor fixes

  mali-dp:
   - Assorted fixes

  sunxi:
   - Minor fix"

[ This was the "fixed" pull, that still had build warnings due to people
  not even having build tested the result. I'm not a happy camper

  I've fixed the things I noticed up in this merge.      - Linus ]

* tag 'drm-for-v4.11-less-shouty' of git://people.freedesktop.org/~airlied/linux: (1177 commits)
  lib/Kconfig: make PRIME_NUMBERS not user selectable
  drm/tinydrm: helpers: Properly fix backlight dependency
  drm/tinydrm: mipi-dbi: Fix field width specifier warning
  drm/tinydrm: mipi-dbi: Silence: ‘cmd’ may be used uninitialized
  drm/sti: fix build warnings in sti_drv.c and sti_vtg.c files
  drm/amd/powerplay: fix PSI feature on Polars12
  drm/amdgpu: refuse to reserve io mem for split VRAM buffers
  drm/ttm: fix use-after-free races in vm fault handling
  drm/tinydrm: Add support for Multi-Inno MI0283QT display
  dt-bindings: Add Multi-Inno MI0283QT binding
  dt-bindings: display/panel: Add common rotation property
  of: Add vendor prefix for Multi-Inno
  drm/tinydrm: Add MIPI DBI support
  drm/tinydrm: Add helper functions
  drm: Add DRM support for tiny LCD displays
  drm/amd/amdgpu: post card if there is real hw resetting performed
  drm/nouveau/tmr: provide backtrace when a timeout is hit
  drm/nouveau/pci/g92: Fix rearm
  drm/nouveau/drm/therm/fan: add a fallback if no fan control is specified in the vbios
  drm/nouveau/hwmon: expose power_max and power_crit
  ..
2017-02-23 18:58:18 -08:00
Linus Torvalds
195849ea13 ARM: DT updates for v4.11
A total of 380 patches this time, mostly adding support for more hardware
 in the device tree descriptions. There is not much exciting here for 4.11,
 but I've tried my best to condense the information from the pull requests
 I got into a readable summary.
 
 Noteworthy changes to existing platforms include:
   - The GIC memory map was a bit wrong almost everywhere and now
     gets fixed up
   - The Allwinner platforms convert to the generic pinmux properties
   - The Marvell EBU platforms now use the new DSA binding
   - Samsung Exynos4212 was unused and gets removed
   - The Renesas power management got improved
 
 New production machines:
   - Lego Mindstorms EV3
     https://www.lego.com/en-us/mindstorms/about-ev3
   - Beelink X2 Android media box
     http://linux-sunxi.org/Beelink_X2
   - "Romulus" baseboard management controller for OpenPower
   - Axentia TSE-850 Data Radio Channel (DARC) encoder
     http://www.axentia.se/db/equipment.html
   - Luxul XAP-1410 and XWR-1200 wireless access points
     https://luxul.com/xap-1410
 
 New SoCs:
   - Allwinner H2+ and V3s, both minor variations of already
     supported chips
     http://www.allwinnertech.com/index.php?c=product&a=index&id=38
   - Marvell Prestera DX packet processors based on Armada XP architecture
     http://www.marvell.com/switching/prestera-dx/
   - Samsung Exynos4412 Prime gets added, a minor variation of Exynos4412
 
 New developer and reference boards:
   - Lichee Pi One, Lichee Pi Zero and Orange Pi Zero,
     all based on Allwinner SoCs
     http://linux-sunxi.org/LicheePi_One
     http://www.orangepi.org/orangepizero/
   - SAMA5d36ek Reference platform
     http://www.atmel.com/tools/sama5d36-ek.aspx
   - Beaglebone Green Wireless and Black Wireless
     https://beagleboard.org/black-wireless
     https://beagleboard.org/green-wireless
   - phyCORE-AM335x System on Module
     http://phytec.com/products/system-on-modules/phycore/am335x/
   - New revision of "vf610-zii" Zodiac Inflight Innovations board
   - Various i.MX System-on-Module: Is.IoT MX6UL, SavageBoard, Engicam i.Core
     http://www.opossom.com/english/index.html
     http://www.savageboard.org/
     http://www.engicam.com/en/products/embedded/som/sodimm/is-iot-mx6ul
     http://www.engicam.com/en/products/embedded/som/sodimm/i-core-m6s-dl-d-q
   - Liebherr (LWN) monitor 6 based on i.MX6 Quad, no idea what this is
 
 Cleanups and bugfixes on at91, bcm53xx, i.MX, mvebu, omap, oxnas, qcom,
     rockchip, sti, stm32 and tegra
 
 New device supports added to some boards and SoCs, briefly by platform:
   - Allwinner: SPDIF, A33 cpufreq, A33 Mali GPU
   - Aspeed: network, ipmi bt, gpio, pinmux
   - Broadcom: video encoder for raspberry pi, qspi, ethernet, sd/mmc
   - TI DaVinci: gpio, lcdc, usb, video-in, uart
   - TI Keystone 2: MSM RAM, power/reset, uart
   - Mediatek MT2701: clocks, iommu, spi, nand, adc, thermal
   - Marvell EBU: ethernet switch on Turris Omnia
   - NXP i.MX: otp ram, USB, wifi, bluetooth, spdif, spi, pmic,
     eeprom, mmc, nand
   - TI OMAP:
   - Qualcomm: coresight, gyro/accelerometer, hdmi
   - Renesas: pmic, soc-id
   - Rockchip: qos
   - Samsung: audio on Odroid-X
   - Socfpga: FPGA manager, i2c, led, can, watchdog, nand, power monitor
   - STi: video in/out
   - STM32: timer, pwm, i2c, rtc, add, i2s
   - NVIDIA Tegra: tpm
   - Uniphier: mmc/sd pinmux
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIVAwUAWK9aamCrR//JCVInAQJPpBAA2qUQYRfCgzK1fEu6X+c8pzqITqlV+Hx7
 8tBsZFINywKLnUXLs4Ip4DDK8uDsIACXSmGMdmhUVIXLsuRxJBl8av+ndd+ERGoF
 bg/iAIyA9hjKRhorE1wDyC4wg1S4P8laPevbK7NcDYDbK9MRmGSmEyP2uvhfLtVy
 2zoPfIE5aEipx6GoIATzLRqpMO6rWB/eg9OUZVKN5Hwh3LNCKtkX726GC9WGVqoE
 zslF1S6VH63dfru2Vlu5eFdvmiox54gBJBMR7yld+EIiXWilNT0eWfEYRd3CMT6E
 EwRCNiNRa21DHstBdL9pTuE+K0LpAUXlznjiqeWrZVuJfdHJy51pGVWwoc4ynbhI
 TS/GFgJI4iG2xrE3EIJS5cAl1S9WtNOYYvZATM35blFbZv7ASoAGdj2EECIIPwJr
 CR4l9Y2k/fuNHAzhR4B0fEKj/uWj7ONqcolpf8W6lZx0MvVNgeDwdx0eoLrbrxY9
 MJFb9OgD+BhNp5lIElysl0L9aEp3PxV668nSg4qV+Mo4w/5/OXhHK8675bXlITFU
 4Rw6fxRUBeO2B0LSonE4Ds8QKMQCs2yfxyMPWMn8yK/xFkwpHzwoJuRR2RYpbQTb
 5Hrnfk23k+2rflht07XBxNqqaznDQyPPvAvoB0ZZ2kchPYl75MlpAfOGlgfhXcmm
 Kp4g7VYyfAs=
 =ucQ/
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM DT updates from Arnd Bergmann:
 "A total of 380 patches this time, mostly adding support for more
  hardware in the device tree descriptions. There is not much exciting
  here for 4.11, but I've tried my best to condense the information from
  the pull requests I got into a readable summary.

  Noteworthy changes to existing platforms include:

   - The GIC memory map was a bit wrong almost everywhere and now gets
     fixed up

   - The Allwinner platforms convert to the generic pinmux properties

   - The Marvell EBU platforms now use the new DSA binding

   - Samsung Exynos4212 was unused and gets removed

   - The Renesas power management got improved

  New production machines:

   - Lego Mindstorms EV3:
        https://www.lego.com/en-us/mindstorms/about-ev3

   - Beelink X2 Android media box:
        http://linux-sunxi.org/Beelink_X2

   - "Romulus" baseboard management controller for OpenPower

   - Axentia TSE-850 Data Radio Channel (DARC) encoder:
        http://www.axentia.se/db/equipment.html

   - Luxul XAP-1410 and XWR-1200 wireless access points:
        https://luxul.com/xap-1410

  New SoCs:

   - Allwinner H2+ and V3s, both minor variations of already supported
     chips:
        http://www.allwinnertech.com/index.php?c=product&a=index&id=38

   - Marvell Prestera DX packet processors based on Armada XP
     architecture:
        http://www.marvell.com/switching/prestera-dx/

   - Samsung Exynos4412 Prime gets added, a minor variation of
     Exynos4412

  New developer and reference boards:

   - Lichee Pi One, Lichee Pi Zero and Orange Pi Zero, all based on
     Allwinner SoCs:
        http://linux-sunxi.org/LicheePi_One
        http://www.orangepi.org/orangepizero/

   - SAMA5d36ek Reference platform:
        http://www.atmel.com/tools/sama5d36-ek.aspx

   - Beaglebone Green Wireless and Black Wireless:
        https://beagleboard.org/black-wireless
        https://beagleboard.org/green-wireless

   - phyCORE-AM335x System on Module:
        http://phytec.com/products/system-on-modules/phycore/am335x/

   - New revision of "vf610-zii" Zodiac Inflight Innovations board

   - Various i.MX System-on-Module: Is.IoT MX6UL, SavageBoard, Engicam
     i.Core:
        http://www.opossom.com/english/index.html
        http://www.savageboard.org/
        http://www.engicam.com/en/products/embedded/som/sodimm/is-iot-mx6ul
        http://www.engicam.com/en/products/embedded/som/sodimm/i-core-m6s-dl-d-q

   - Liebherr (LWN) monitor 6 based on i.MX6 Quad, no idea what this is

   - Cleanups and bugfixes on at91, bcm53xx, i.MX, mvebu, omap, oxnas,
     qcom, rockchip, sti, stm32 and tegra

  New device supports added to some boards and SoCs, briefly by platform:

   - Allwinner: SPDIF, A33 cpufreq, A33 Mali GPU

   - Aspeed: network, ipmi bt, gpio, pinmux

   - Broadcom: video encoder for raspberry pi, qspi, ethernet, sd/mmc

   - TI DaVinci: gpio, lcdc, usb, video-in, uart

   - TI Keystone 2: MSM RAM, power/reset, uart

   - Mediatek MT2701: clocks, iommu, spi, nand, adc, thermal

   - Marvell EBU: ethernet switch on Turris Omnia

   - NXP i.MX: otp ram, USB, wifi, bluetooth, spdif, spi, pmic, eeprom,
     mmc, nand

   - TI OMAP:

   - Qualcomm: coresight, gyro/accelerometer, hdmi

   - Renesas: pmic, soc-id

   - Rockchip: qos

   - Samsung: audio on Odroid-X

   - Socfpga: FPGA manager, i2c, led, can, watchdog, nand, power monitor

   - STi: video in/out

   - STM32: timer, pwm, i2c, rtc, add, i2s

   - NVIDIA Tegra: tpm

   - Uniphier: mmc/sd pinmux"

* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (380 commits)
  ARM: dts: armada-385-linksys: fix DSA compatible property
  ARM: dts: Fix typo in armada-xp-98dx4251
  ARM: DTS: Fix register map for virt-capable GIC
  dt-bindings: arm,gic: Fix binding example for a virt-capable GIC
  ARM: dts: sun8i: sinlinx: Enable audio nodes
  ARM: dts: sun8i: parrot: Enable audio nodes
  ARM: dts: sun8i: Add audio codec, dai and card for A33
  ARM: dts: Add EMAC AXI settings for Arria10
  ARM: dts: am335x-chiliboard: Support charger
  ARM: dts: am335x-chiliboard: Support power button
  ARM: sun8i: dt: Add mali node
  dt-bindings: gpu: Add Mali Utgard bindings
  ARM: dts: stm32: Add I2C1 support for STM32429 eval board
  ARM: dts: stm32: Add I2C1 support for STM32F429 SoC
  ARM: dts: stm32: Use clock DT binding definition on stm32f429 family
  dt-bindings: mfd: stm32f4: Add missing binding definition
  dt-bindings: mfd: stm32f4: Fix STM32F4_X_CLOCK() macro
  ARM: dts: stm32: Enable pwm1 and pwm3 for stm32f469-disco
  ARM: dts: stm32: add Timers driver for stm32f429 MCU
  ARM: dts: add the AB8500 sysclk to the device trees
  ...
2017-02-23 15:46:25 -08:00
Dave Airlie
894ebc414d drm/panel: Changes for v4.11-rc1
This set contains a couple of cleanups as well as support for a few more
 simple panels.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCAAxFiEEiOrDCAFJzPfAjcif3SOs138+s6EFAlivHekTHHRyZWRpbmdA
 bnZpZGlhLmNvbQAKCRDdI6zXfz6zofTfEACk2GdNP2ZNfXmPGkTmgnFRghWDa64J
 7j+SMI/5D/6B/xR7obgj1vjEEnLEeY515IXxA+l04QRndsm2X3HGo3GwhrrkAfAl
 HDZR4UuXxyEWJz2G4eMrqwMril0LwUlMSXkelWR9hleFGeL9PZjt9XnRYFXgBEFA
 nyvC7VQIN5yz/d6rzRLUuWwnDrcnV4sRHssMucyht4xk8SAnSjAvJhJ6/5PQMkSL
 aMLOUcFMfhew66EEIZrA402NZlCGGM2OnRGD0qBoH45T2Wipxw2oR6jVwROgDgRS
 O5nKOLM+zktcdfmPJsP4PV3Z5oyhhilPTlGWEnIVEcBtWHS1hZbExgX7TqWgaqVD
 Il7Wnjiar8Yy7XpVdjyZtztvanNkHP+HW4BoHkhvMLiJIwMJ5y+VCBlZ6d02LQpZ
 qdCE2NCjLDmV5ro5FujWk/bdCx+YDwqVxhluiYYzMdweRTgmRE2On0zGVJciSUeX
 2CQhKau4lOJUjbEu+T5qLQgfXUhiUKFcI997x6elf74iwTncj22TCbRDshN7nct2
 HkBJviuLW1SqsZ0eZ+N4GaFr14INRVeFm21dwAU/VVkN95GKm1IOILs4ZruvT6WM
 iLJRQ9a2CGoJYLPYBfCETACm3CiwJZeeIMc581iC+wOWL2YjQpC0iooXmq6RChF0
 waAtb9/cQlHYgQ==
 =vKBu
 -----END PGP SIGNATURE-----

Merge tag 'drm/panel/for-4.11-rc1' of git://anongit.freedesktop.org/tegra/linux into drm-next

drm/panel: Changes for v4.11-rc1

This set contains a couple of cleanups as well as support for a few more
simple panels.

* tag 'drm/panel/for-4.11-rc1' of git://anongit.freedesktop.org/tegra/linux:
  drm/panel: simple: Specify bus width and flags for EDT displays
  drm/panel: simple: Add Netron DY E231732
  of: Add vendor prefix for Netron DY
  drm/panel: simple: Add support for Tianma TM070JDHG30
  of: Add vendor prefix for Tianma Micro-electronics
  drm/panel: simple: Add support BOE NV101WXMN51
  dt-bindings: display: Add BOE NV101WXMN51 panel binding
  drm/panel: Constify device node argument to of_drm_find_panel()
2017-02-24 08:29:03 +10:00
Linus Torvalds
d5dee39b27 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry:

 - a new driver for Zeitech touchscreen controller

 - a new driver for Samsung "touchkeys"

 - touchscreen driver for Moorestown platform has been removed because
   platform support is gone

 - MPU3050 accelerometer driver was removed in favor of IIO driver

 - miscellaneous driver cleanup and fixes

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (88 commits)
  Input: zet6223 - export OF device ID as module aliases
  Input: tsc2004/5 - switch to using generic device properties
  Input: tsc2004/5 - fix regulator handling
  Input: tsc2005 - add OF device table
  Input: add driver for Zeitec ZET6223
  Input: joydev - do not report stale values on first open
  Input: synaptics-rmi4 - forward upper mechanical buttons to PS/2 guest
  Input: synaptics-rmi4 - clean up F30 implementation
  Input: synaptics - use SERIO_OOB_DATA to handle trackstick buttons
  Input: psmouse - add a custom serio protocol to send extra information
  Input: synaptics-rmi4 - fix error return code in rmi_probe_interrupts()
  Input: xpad - restore LED state after device resume
  Input: synaptics-rmi4 - add rmi_find_function()
  Input: xpad - fix stuck mode button on Xbox One S pad
  Input: joydev - use clamp() macro
  Input: refuse to register absolute devices without absinfo
  Input: synaptics-rmi4 - add sysfs interfaces for hardware IDs
  Input: synaptics-rmi4 - add sysfs attribute update_fw_status
  Input: mousedev - stop offering PS/2 to userspace by default
  Input: tca8418 - switch to using generic device properties
  ...
2017-02-23 08:39:40 -08:00
Linus Torvalds
be5165a51d DeviceTree updates for 4.11:
- Sync dtc to upstream commit 0931cea3ba20. This picks up overlay
   support in dtc.
 
 - Set dma_ops for reserved memory users.
 
 - Make references to IOMMU consistent in DT bindings.
 
 - Cleanup references to pm_power_off in bindings.
 
 - Move some display bindings that snuck into the old bindings/video/
   path.
 
 - Fix some wrong documentation paths caused from binding restructuring.
 
 - Vendor prefixes for Faraday and Fujitsu.
 
 - Fix an of_node ref counting leak in of_find_node_opts_by_path
 
 - Introduce new graph helper of_graph_get_remote_node() which will be
   used by DRM drivers in 4.12.
 -----BEGIN PGP SIGNATURE-----
 
 iQItBAABCAAXBQJYrcjTEBxyb2JoQGtlcm5lbC5vcmcACgkQ+vtdtY28YcOPjg/8
 CZgxb3humk7Kkt+I3IsZCxsXhgdk2+CPfCSHlK1bc5Jqg0TzepQvFt4ZkuRHkZy/
 pQLUpRnUEUl64aaE8WxZY8ELYZggWazcTnWgCOzvoYpqSD4dAkAsqeti1Qh9PGKz
 fNLnPWREftojFZ7wVQ8btxC1dINc9eC9eEHsIsS8S8UIgLgv/aN6PeG1Ll/UUa9d
 u9orY3lxrz8JvdZslGtd1XLZqehIG0AAXqYRasyKl6Sc1NgjdwJTrqoeHEnCYaBM
 0+JUOf8kjRa1QNYN4SpuQ1gpovS8tPUGuODrWF2FvaQIxYHTzF8MpLqTvjBzdsj6
 b1owHzMXOLlPqqmmQ+jkHY5phisM4heJCIanNerzfM9+lHvb6kB3EuoTkAGvzsr/
 HCJi/Wk8tVrw6MYdnav0NT6aLIgZmrVspeJKlS1IdIkpsxZ64DsgX/YS/qGn/fcx
 qMrDXh8gMFwJBENRCKmKYFu1kzJkBoVEXtGlIbRQDZwOIuHPJl/ed6naMSfyUmcL
 wEe1I3buyB38FVzUTM2y0K1LfFJSJqOFSWTy5WCcTyP4cbKUyEja8vzN1Cx8BDwf
 wYtGWQQcg1Pyo074De6ojXWPiiW8f64GLLjqPALjA+J6JtZY5PwAnGXV+1ZYgX+V
 hV+kXbS4UIjN1koxroJ7ahfouWdOignmpwdvomQPLG8=
 =D/BO
 -----END PGP SIGNATURE-----

Merge tag 'devicetree-for-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

Pull DeviceTree updates from Rob Herring:
 "Pretty standard stuff with dtc upstream sync being the biggest piece.

   - Sync dtc to upstream commit 0931cea3ba20. This picks up overlay
     support in dtc.

   - Set dma_ops for reserved memory users.

   - Make references to IOMMU consistent in DT bindings.

   - Cleanup references to pm_power_off in bindings.

   - Move some display bindings that snuck into the old bindings/video/
     path.

   - Fix some wrong documentation paths caused from binding
     restructuring.

   - Vendor prefixes for Faraday and Fujitsu.

   - Fix an of_node ref counting leak in of_find_node_opts_by_path

   - Introduce new graph helper of_graph_get_remote_node() which will be
     used by DRM drivers in 4.12"

* tag 'devicetree-for-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (27 commits)
  DT: add Faraday Tec. as vendor
  of: introduce of_graph_get_remote_node
  of: Add missing space at end of pr_fmt().
  of: make of_device_make_bus_id() static
  of: fix of_node leak caused in of_find_node_opts_by_path
  dt-bindings: net: remove reference to fixed link support
  dt-bindings: power: reset: qnap-poweroff: Drop reference to pm_power_off
  dt-bindings: power: reset: gpio-poweroff: Drop reference to pm_power_off
  dt-bindings: mfd: as3722: Drop reference to pm_power_off
  dt-bindings: display: move ANX7814 and SiI8620 bridge bindings
  of/unittest: Swap arguments of of_unittest_apply_overlay()
  Documentation: usb: fix wrong documentation paths
  serial: fsl-imx-uart.txt: Remove generic property
  devicetree: Add Fujitsu Ltd. vendor prefix
  Documentation: display: fix wrong documentation paths
  of: remove redundant memset in overlay
  bus:qcom : Fix typo in qcom,ebi2.txt
  dt-bindings: qman: Remove pool channel node
  Documentation: panel-dpi: fix path to display-timing.txt
  devicetree: bindings: clk: mvebu: fix description for sata1 on Armada XP
  ...
2017-02-22 19:23:14 -08:00
Noralf Trønnes
fbaa326df3 of: Add vendor prefix for Multi-Inno
Multi-Inno Technology Co.,Ltd is a Hong Kong based company offering
LCD, LCD module products and complete panel solutions.

Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Rob Herring <robh@kernel.org>
2017-02-18 18:05:00 +01:00
Hans Ulli Kroll
4e29ccdb24 DT: add Faraday Tec. as vendor
add Faraday Technology Corporation as vendor faraday for DT

Signed-off-by: Hans Ulli Kroll <ulli.kroll@googlemail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
2017-02-15 17:01:50 -06:00
Jelle van der Waa
83f66a6f08 Input: add driver for Zeitec ZET6223
This is a basic driver for the Zeitec ZET6223 I2C touchscreen
controllers. The driver does not support firmware loading, which is not
required for all tablets which contain this chip.

Signed-off-by: Jelle van der Waa <jelle@vdwaa.nl>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-02-09 13:54:51 -08:00
Arnd Bergmann
2bad7f862e Allwinner DT changes for 4.11
The usual chunk of DT changes, most notably:
   - Support for the H2+ and the V3s
   - CPUFreq support for the A33
   - SPDIF support for the A31 and H3
   - New boards: Beelink X2, Lichee Pi One, Lichee Pi Zero,
     Orange Pi Zero
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABCAAGBQJYkFCYAAoJEBx+YmzsjxAgljYP/0seq1LEtMtoTeXHP6ZPkrju
 7/pHjEwJFZRH98DZ0QMAcUM+fHB0C4h5UadEXCIyzYBO9yeHzm+Hoys4VvpaQasL
 6taHz3zJ5T1/si7HyyP16LEwaFeARmSO3aXh4t5195Y2u3BFD+b2i5BpMquCC5CM
 XXJmx3Q487bUWjdufUqiSz0gWK1BfKw/eJAawoJbIl9Z6v7wOvE0SQF8ZtIc2eOl
 WX9uyNKdYh4PsSC0TxexDeKHNhLh2hJgO1HxYg+DTdyGM144XO0OSuPFtfilROaL
 tViKBohffz8A4K5m5iCaDva+P9318iO2xVN91/DFV6VS2XhMRvUrfZRd9kEvuhvu
 FJF3KrIZDLRu7tkcHVt9GDjO3CElejMT+qLOGg7t+9nJ+6RjyHUSBs6HIU0Opsu0
 Fw7LyHihzDH/m7m87lxUUmC5rSRqMVfuiKwphHYqDzkYEGEnL4kv055rE6cBFGyM
 zr7aajpiFgARPXj1XdZQRnz8uC8kySUf2o1oLPdhP3szX41AWBTiBuT7yqMB6qnD
 5B8Xj4zTsjEYfwsaWaI8VhbK2UsLgsUlbUXugKfqtjoPTjaWN6zQ3C6030Bov9za
 2jo0+187iYp/B/M4DPiH3Kicfntnj4DWRmBt8wCX/PVXS2tD1S617JzugbX/+EZK
 PF328UgsT3c1UkccBK9/
 =ig5Q
 -----END PGP SIGNATURE-----

Merge tag 'sunxi-dt-for-4.11' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into next/dt

Pull "Allwinner DT changes for 4.11" from Maxime Ripard:

The usual chunk of DT changes, most notably:
  - Support for the H2+ and the V3s
  - CPUFreq support for the A33
  - SPDIF support for the A31 and H3
  - New boards: Beelink X2, Lichee Pi One, Lichee Pi Zero,
    Orange Pi Zero

* tag 'sunxi-dt-for-4.11' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux: (42 commits)
  ARM: dts: sun8i-h3: Add SPDIF to the Beelink X2
  ARM: dts: sun8i-h3: Add the SPDIF block to the H3
  ARM: dts: sun8i-h3: Add SPDIF TX pin to the H3
  ARM: dts: sun8i-h3: Add dts for the Beelink X2 STB
  ARM: sun8i: sina33: Enable display
  ARM: sun8i: a23/a33: Add the oscillators accuracy
  ARM: sun8i: a23/a33: Enable the real LOSC and use it
  ARM: dts: sunxi: add support for Lichee Pi Zero board
  ARM: dts: sunxi: add dtsi file for V3s SoC
  ARM: dts: sun6i: sina31s: Enable USB OTG controller in peripheral mode
  ARM: dts: sun8i: reference-design: use AXP223 DTSI
  ARM: dts: sun8i: parrot: use AXP223 DTSI
  ARM: dts: sun8i: sina33: use AXP223 DTSI
  ARM: dts: sun8i: a33-olinuxino: use AXP223 DTSI
  ARM: dts: add DTSI for AXP223
  dt-bindings: power: axp20x-usb: add axp223 compatible
  ARM: dts: sun7i: Add wifi dt node on Banana Pro
  ARM: dts: sun6i: Add SPDIF to the Mele I7
  devicetree: bindings: Add vendor prefix for Shenzhen Xunlong Software
  ARM: dts: sun8i-h3: orange-pi-pc: Enable audio codec
  ...
2017-02-07 16:08:58 +01:00
Olof Johansson
c3fcab3af4 i.MX device tree updates for 4.11:
- New board support: vf610-zii-dev-rev-c, imx6ul-opos6uldev,
    imx6ul-isiot, imx6qdl-savageboard, imx6q-mccmon6.
  - A patch from Alexandre to correct the mangled license text which
    has been copied & pasted all over the i.MX device tree files.
  - Update cpu nodes of some i.MX SoCs to make them consistent and match
    ePAPR spec.
  - Add OCOTP device for i.MX6UL SoC.
  - Add security violation interrupt for i.MX25 DryIce.
  - Enable USB OTG, WIFI and Bluetooth support for i.MX6SX Udoo Neo
    board.
  - Enable S/PDIF and 2nd display pipeline support for CompuLab board..
  - Add SPI and LTC3676 PMIC support for Gateworks Ventana boards.
  - A few random device addition for various boards: TVE DAC regulators
    for imx53-qsb, EEPROM for vf610-zii-dev, eMMC and NAND support for
    i.MX6UL Engicam boards.
  - Cleanups on obsoleted or unused properties.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJYjWLQAAoJEFBXWFqHsHzOGt0H/2WCsuRi6WU7i7Wyk/S0Xq5t
 HzA/9m2f7z1vb1tzFknbpcWYa9bdofI7Dz+6KW2vp4fxhMyJn8SQxWwQjVNya2ba
 z8XLdEMlIuozBebPcH84ovNzqoBIOEFahGm5smm40s/o7XL8ua9tOEFaUc+jY0Pd
 n/3TPmoyBTlbrgiCZfLXCVsczHtEVW5JoQmXT7aDsxT0BQpnwLbgXKVOxgDvsWXM
 WtAKjpGvdiApD3znbFjYmRKak+2uilkV5B4jrL4mZf8dxCliykP4XA/LbiMLKAMN
 voMpTtTK7UYp59GrwKbqfJ+pPU7b6ndKK59f7FWrTDNgtDGe+J4ExjWwsDnuLfI=
 =HAbg
 -----END PGP SIGNATURE-----

Merge tag 'imx-dt-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt

i.MX device tree updates for 4.11:
 - New board support: vf610-zii-dev-rev-c, imx6ul-opos6uldev,
   imx6ul-isiot, imx6qdl-savageboard, imx6q-mccmon6.
 - A patch from Alexandre to correct the mangled license text which
   has been copied & pasted all over the i.MX device tree files.
 - Update cpu nodes of some i.MX SoCs to make them consistent and match
   ePAPR spec.
 - Add OCOTP device for i.MX6UL SoC.
 - Add security violation interrupt for i.MX25 DryIce.
 - Enable USB OTG, WIFI and Bluetooth support for i.MX6SX Udoo Neo
   board.
 - Enable S/PDIF and 2nd display pipeline support for CompuLab board..
 - Add SPI and LTC3676 PMIC support for Gateworks Ventana boards.
 - A few random device addition for various boards: TVE DAC regulators
   for imx53-qsb, EEPROM for vf610-zii-dev, eMMC and NAND support for
   i.MX6UL Engicam boards.
 - Cleanups on obsoleted or unused properties.

* tag 'imx-dt-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (32 commits)
  ARM: dts: udoo_neo: Add Bluetooth support
  ARM: dts: udoo_neo: Add Wifi support
  ARM: dts: udoo_neo: Add UDOO Neo USB OTG1 and OTG2 support
  ARM: dts: imx6ul: Add Engicam Is.IoT MX6UL NAND initial support
  ARM: dts: imx6ul: Add Engicam Is.IoT MX6UL eMMC initial support
  ARM: dts: imx6qdl: Fix "ERROR: code indent should use tabs where possible"
  ARM: dts: vf610-zii-dev: add EEPROM entry to Rev C
  ARM: dts: add Armadeus Systems OPOS6UL and OPOS6ULDEV support
  ARM: dts: imx6q-utilite-pro: enable 2nd display pipeline
  ARM: dts: vf610-zii-dev: Add .dts file for rev. C
  ARM: dts: vf610-zii-dev-rev-b: Remove leftover PWM pingroup
  ARM: dts: imx6: Support Savageboard quad
  ARM: dts: imx6: Support Savageboard dual
  ARM: dts: imx6: Add Savageboard common file
  ARM: dts: imx53-qsb: Provide the TVE DAC regulators
  ARM: dts: imx6q: Add mccmon6 board support
  Doc: devicetree: bindings: Add vendor prefix entry - lwn
  ARM: dts: imx/vf: Correct license text
  ARM: dts: imx25.dtsi: DryIce security violation interrupt
  ARM: dts: imx: Add ocotp node for imx6ul
  ...

Signed-off-by: Olof Johansson <olof@lixom.net>
2017-01-29 21:07:40 -08:00
Andreas Klinger
2bee073c0d iio: distance: srf08: add trivial DT binding
- Add DT binding for devantech,srf08
 - Add vendor devantech to vendor list

Signed-off-by: Andreas Klinger <ak@it-klinger.de>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-01-28 16:38:07 +00:00
Maxime Ripard
505c9d4105 of: Add vendor prefix for Netron DY
Netron DY is a brand of LCD panels found on SBCs and tablets.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2017-01-26 10:44:27 +01:00
Gary Bisson
c81cbc2e33 of: Add vendor prefix for Tianma Micro-electronics
Tianma Micro-electronics Co., Ltd. (Tianma) specializes in providing
display solutions and efficient support services worldwide.

More info:
http://en.tianma.com/about.shtml

Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2017-01-26 10:39:43 +01:00
Neil Armstrong
100bd9a961 dt-bindings: vendor-prefix: Add wetek vendor prefix
Add prefix for WeTek Electronics, limited, a company producing multimedia
Set-Top-Boxes and supporting KODI and LibreELEC distributions.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2017-01-23 10:09:37 -08:00
Greg Kroah-Hartman
994261dc8f devicetree: sort the Garmin vendor prefix properly.
The addition of Garmin put it in the incorrect place.  This fixes that
issue.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes: 9b27c270d4 ("devicetree: add Garmin vendor prefix")
Cc: Rob Herring <robh@kernel.org>
Cc: Matt Ranostay <matt@ranostay.consulting>
Cc: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
2017-01-20 16:02:19 +01:00
David Lechner
7dcc31e2e6 dt-bindings: Add vendor prefix for LEGO
Add a vendor prefix for LEGO Systems A/S

Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2017-01-20 17:15:55 +05:30
Greg Kroah-Hartman
4463c3e72d First round of new device support, features and cleanups for IIO in the 4.11 cycle.
It's shaping to be another fairly busy cycle. Lots more on the way!
 
 New device support
 * ads7950
   - new driver supporting ads7950, ads7951, ads7952, ads7953, ads7954,
   ads7955, ads7956, ads7957, ads7958, ads7959, ads7960, and ads7961 ADCs.
 * cm3605
   - New driver for this light sensor and proximity sensor  which is an
   analog part with some additional digital controls.
 * hx711
   - New driver.
 
 Core new stuff
 * Gravity sensor type.  This is a processed datastream in which the device
 will try to work out which way is down.
 * Split the buffer.h file into two parts. One provides the interface to 'use'
 a buffer, the second provides the internals of the buffer functionality as
 needed by implementations of buffers.
   - Move documentation inline so as to allow use of private: tag when
   generating documentation.
   - Add some utility functions for the few things that are directly done
   with the buffers.
   - Stop exporting functions that no-one uses outside of the core code.
   - Push docs down by the code in the c file where they should have always
   been.
   - Fix typo in kernel-doc for buffer.
   - push down some includes that were previously happening implicitly.
   - stop enabling the timestamp of the dummy device.
 
 Features and cleanups
 * ad5592r
   - ACPI support
 * ad5593r
   -ACPI support.
 * ad5933
   - Fix a false comment about size of a particular register.
 * ad7150
   - replace S_IRUGO | S_IWUSR with 0644.  I'm not that keen on these patches
   in general, but as it was nicely presented I took this one anyway. As a
   general rule will only take these as part of a larger driver cleanup.
   - don't eat an error but rather reutnr it in the write_event_config callback.
 * ad7606
   - replace non standard range attibute with _scale
 * ade7753
   - use usleep_range for short sleeps
 * ade7754
   - use usleep_range for short sleeps
 * ade7758
   - use usleep_range for short sleeps
 * ade7759
   - use usleep_range for short sleeps
 * ade7854
   - use usleep_range for short sleeps
 * adis16201
   - fix description
 * adis16203
   - fix description
   - fix copyright year
 * adis16209
   - fix description
 * adt7316
   - Add braces to arms of if else statement (for consistency)
   - Alignment fixes.
 * axp288
   - Fix up an issue with accidental overwrites of data.
 * bmi160
   - add deivce tables for i2c and spi to support correctly identifying the
   full dt name (including manufacturer).
   - device tree binding.
 * bmp280
   - use usleep_range for short sleeps.
 * cm3232
   - return error from cm3232_reg_init rather than eating it if the last write
   fails.
 * dummy driver
   - remove a semicolor found at end of a function defintition.
 * exynos-adc
   - use usleep_range for short sleeps.
 * hid-sensor (accel)
   - Add timestamp support.  The hardware can provide timestamps so lets support
   them. If not fall back to timestamps estimated in kernel.
 * hid-sensor (light)
   - Add a duplicate ID for the light channels so as to keep existing interface
   whilst also using the more standard IIO interface.
 * hts221
   - acpi probing
 * imx25-gcq
   - Add a macro call to allow this driver to be automatically loaded.
 * isl29028
   - reorganise code to avoid deep nesting of if statements.
   - move chip test and default regs into a function suitable or sharing with
   power management code.
   - tidy up some code alignment.
 * lidar-lite-v3
   - introduce compatible strings that make it clear Garmin have consideral
   friends.
 * mma8452
   - avoid returning signed value when unsigned is appropriate
 * spmi-vadc
   - Update function for generic voltage conversion to take into account that
   different channels on this device should be handled differently.
   - Rework code to allow per channel voltage scaling and support the standard
   options for this hardware.
   - Fixup three minor issues with the above patches for this part. These all
   effect test builds rather than the native builds for the part, but good to
   clean them up anyway.
 * st_sensors
   - support device matching from the ACPI DST tables.
   - acpi based probing for accelerometers
   - acpi based probing for pressure sensors
   - Allow pressure sensors to read negative values.
   - Export sampling frequency for lps25h and lps331ap.
   - Add support for the old DT bindings from the period when these deivces
   were often supported through windows.
 
 Docs fixup:
 * typo in sysfs-bus-iio
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEEbilms4eEBlKRJoGxVIU0mcT0FogFAlh2bhcRHGppYzIzQGtl
 cm5lbC5vcmcACgkQVIU0mcT0FogdSQ/9Hyd3ic5AgWyDKr9JI1vJPj3kT0PIYHLk
 4ucbQ8HUJQBBLnsausTb+UwuGV277DkVjGVsI4epn59H3CvkNh3Egl3XCmbhIpt2
 oyl9Pw9dSon6n/7I5pNSwmqD45O+aB7qFLigIfLmciwpMHZly3ExzGBMpqUkgjf9
 bVzndDqrfoNIrU7UaMD6QgrSxrgYJJJJwBDig/0zjAkGvu9L8a8ghrKkrRzMy62O
 nGP5mmEagivFF9lpGzzrw2pYBQWY4AFbsNvuLElE7nUz0PKKG+9J0oaBiglTYv2p
 mkNlYl7iTZfI3eFOXa+7HdSmeNhYX2dvbEM2jAA/Mr6ojWg2mSRu7Y19Kl2KP7K7
 BDRKBw+Cp0wkVvJ8LU/6PiDSmqp09VfjjqevzVGJi/BmWLzG0Mi2OsQmmynbw2SV
 hxiGETRV7vBoyJWDJuwJoftZaRnHWJbiQ6ftEUbWOFA9RIBMgOJBiL+RtxerJkHv
 FWlCFpv/618TUB/uM15+EOLVJAT5b7K+6+l6EGEjWdjiS/7vL7QM5DL8w4zV43zz
 cQ98UeIlqCkvoFmx9uHbl44COLQgzNtxAjytLxqbsOmEb40wlzoNzgSoUGu73SaG
 8qwznH0w0p8P1nyzwe9qKKK6SmFhj/tF6jKVmIi/H7wJdA1J5dAAmwFUBSxLs2DX
 u1eM3ikCl/M=
 =yjUA
 -----END PGP SIGNATURE-----

Merge tag 'iio-for-4.11a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

First round of new device support, features and cleanups for IIO in the 4.11 cycle.

It's shaping to be another fairly busy cycle. Lots more on the way!

New device support
* ads7950
  - new driver supporting ads7950, ads7951, ads7952, ads7953, ads7954,
  ads7955, ads7956, ads7957, ads7958, ads7959, ads7960, and ads7961 ADCs.
* cm3605
  - New driver for this light sensor and proximity sensor  which is an
  analog part with some additional digital controls.
* hx711
  - New driver.

Core new stuff
* Gravity sensor type.  This is a processed datastream in which the device
will try to work out which way is down.
* Split the buffer.h file into two parts. One provides the interface to 'use'
a buffer, the second provides the internals of the buffer functionality as
needed by implementations of buffers.
  - Move documentation inline so as to allow use of private: tag when
  generating documentation.
  - Add some utility functions for the few things that are directly done
  with the buffers.
  - Stop exporting functions that no-one uses outside of the core code.
  - Push docs down by the code in the c file where they should have always
  been.
  - Fix typo in kernel-doc for buffer.
  - push down some includes that were previously happening implicitly.
  - stop enabling the timestamp of the dummy device.

Features and cleanups
* ad5592r
  - ACPI support
* ad5593r
  -ACPI support.
* ad5933
  - Fix a false comment about size of a particular register.
* ad7150
  - replace S_IRUGO | S_IWUSR with 0644.  I'm not that keen on these patches
  in general, but as it was nicely presented I took this one anyway. As a
  general rule will only take these as part of a larger driver cleanup.
  - don't eat an error but rather reutnr it in the write_event_config callback.
* ad7606
  - replace non standard range attibute with _scale
* ade7753
  - use usleep_range for short sleeps
* ade7754
  - use usleep_range for short sleeps
* ade7758
  - use usleep_range for short sleeps
* ade7759
  - use usleep_range for short sleeps
* ade7854
  - use usleep_range for short sleeps
* adis16201
  - fix description
* adis16203
  - fix description
  - fix copyright year
* adis16209
  - fix description
* adt7316
  - Add braces to arms of if else statement (for consistency)
  - Alignment fixes.
* axp288
  - Fix up an issue with accidental overwrites of data.
* bmi160
  - add deivce tables for i2c and spi to support correctly identifying the
  full dt name (including manufacturer).
  - device tree binding.
* bmp280
  - use usleep_range for short sleeps.
* cm3232
  - return error from cm3232_reg_init rather than eating it if the last write
  fails.
* dummy driver
  - remove a semicolor found at end of a function defintition.
* exynos-adc
  - use usleep_range for short sleeps.
* hid-sensor (accel)
  - Add timestamp support.  The hardware can provide timestamps so lets support
  them. If not fall back to timestamps estimated in kernel.
* hid-sensor (light)
  - Add a duplicate ID for the light channels so as to keep existing interface
  whilst also using the more standard IIO interface.
* hts221
  - acpi probing
* imx25-gcq
  - Add a macro call to allow this driver to be automatically loaded.
* isl29028
  - reorganise code to avoid deep nesting of if statements.
  - move chip test and default regs into a function suitable or sharing with
  power management code.
  - tidy up some code alignment.
* lidar-lite-v3
  - introduce compatible strings that make it clear Garmin have consideral
  friends.
* mma8452
  - avoid returning signed value when unsigned is appropriate
* spmi-vadc
  - Update function for generic voltage conversion to take into account that
  different channels on this device should be handled differently.
  - Rework code to allow per channel voltage scaling and support the standard
  options for this hardware.
  - Fixup three minor issues with the above patches for this part. These all
  effect test builds rather than the native builds for the part, but good to
  clean them up anyway.
* st_sensors
  - support device matching from the ACPI DST tables.
  - acpi based probing for accelerometers
  - acpi based probing for pressure sensors
  - Allow pressure sensors to read negative values.
  - Export sampling frequency for lps25h and lps331ap.
  - Add support for the old DT bindings from the period when these deivces
  were often supported through windows.

Docs fixup:
* typo in sysfs-bus-iio
2017-01-19 10:40:44 +01:00
Marek Vasut
566088d1d2 devicetree: Add Fujitsu Ltd. vendor prefix
The vendor prefix for Fujitsu is used in the tree, but it's
still missing from the documentation, so add it. Fujitsu Ltd.
is a japanese ICT company, http://www.fujitsu.com

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Rob Herring <robh@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
2017-01-11 09:33:25 -06:00
Andreas Klinger
ff1293f677 iio: adc: hx711: Add DT binding for avia,hx711
Add DT bindings for avia,hx711
Add vendor avia to vendor list

Signed-off-by: Andreas Klinger <ak@it-klinger.de>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-01-10 19:54:58 +00:00
Icenowy Zheng
d62d8fcace devicetree: bindings: Add vendor prefix for Shenzhen Xunlong Software
Shenzhen Xunlong Software CO.,Limited is a SBC vendor, which produces
the "Orange Pi" series of SBCs.

Add a vendor prefix for it. This prefix is already used in many
Allwinner H3 boards.

Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-01-10 18:52:53 +01:00
Icenowy Zheng
3e60eb446d dt-bindings: add vendor prefix for Lichee Pi
Lichee Pi is a new "Pi"-named development board series.

Currently available device, Lichee Pi One, is by only one person as
night job, so the device series name is chosen to be the vendor prefix.

Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-01-10 18:52:48 +01:00
Milo Kim
7c9a567045 ARM: dts: imx6: Support Savageboard dual
Common savageboard DT file is used for board support.
Add the vendor name and specify the dtb file for i.MX6Q build.

Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Milo Kim <woogyom.kim@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-01-10 11:24:43 +08:00
Lukasz Majewski
653e9b17f9 Doc: devicetree: bindings: Add vendor prefix entry - lwn
This patch adds entry for LWN - the Liebherr-Werk Nenzing GmbH company to
vendor-prefixes.txt file.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-01-10 10:47:13 +08:00
Matt Ranostay
9b27c270d4 devicetree: add Garmin vendor prefix
Cc: Rob Herring <robh@kernel.org>
Signed-off-by: Matt Ranostay <matt@ranostay.consulting>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-12-31 15:18:17 +00:00
Linus Torvalds
482c3e8835 ARM: 64-bit DT updates for v4.10
A couple of interesting new SoC platforms are now supported, these are
 the respective DTS sources:
 
 - Samsung Exynos5433 mobile phone platform, including an (almost) fully
   supported phone reference board.
 - Hisilicon Hip07 server platform and D05 board, the latest iteration
   of their product line, now with 64 Cortex-A72 cores across two
   sockets.
 - Allwinner A64 SoC, the first 64-bit chip from their "sunxi" product
   line, used in Android tablets and ultra-cheap development boards
 - NXP LS1046A Communication processor, improving on the earlier LS1043A
   with faster CPU cores
 - Qualcomm MSM8992 (Snapdragon 808) and MSM8994 (Snapdragon 810)
   mobile phone SoCs
 - Early support for the Nvidia Tegra Tegra186 SoC
 - Amlogic S905D is a minor variant of their existing Android consumer
   product line
 - Rockchip PX5 automotive platform, a close relative of their popular
   rk3368 Android tablet chips
 
 Aside from the respective evaluation platforms for the above
 chips, there are only a few consumer devices and boards added
 this time:
 
 - Huawei Nexus 6P (Angler) mobile phone
 - LG Nexus 5x (Bullhead) mobile phone
 - Nexbox A1 and A95X Android TV boxes
 - Pine64 development board based on Allwinner A64
 - Globalscale Marvell ESPRESSOBin community board based on Armada 3700
 - Renesas "R-Car Starter Kit Pro" (M3ULCB) low-cost automotive  board
 
 For the existing platforms, we get bug fixes and new peripheral support
 for Juno, Renesas, Uniphier, Amlogic, Samsung, Broadcom, Rockchip, Berlin,
 and ZTE.
 
 Conflicts:
 - Documentation/devicetree/bindings/arm/shmobile.txt: a
   rename/add conflict, keep both modifications and maintain
   alphabetical ordering.
 - arch/arm64/boot/dts/*/*.dtsi: nodes were added in netdev,
   mmc and clk, keep both sides in each case.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIVAwUAWFMYq2CrR//JCVInAQJ38BAAzKC2AmZw2U5t8de1RuC7OOefHnWxzXaI
 hpH5sLLIF10D52VrztqG2EauQWa2K0OYpkO5Up+d8WVdRm6dL2Y9wTMOhdadqWmb
 zPthdGuSpI6yRiST51Umr1pvt5rm/0KYMAiP1B1ySIWCeOyxFmm9er6ZU3By6kbx
 bbXEzY2vs22GJ3+rNxYOVGm1hlhgBaoYnkth2AIXwiGt5OUn4yDs/17+WqNZlg7S
 Bj9vdvn+A/IeiaGZGRUn8J2HxUCeIxJzwntKJyoRfVu6BH+qlrPLhFh/N3Ttzb+3
 Xjh+uQgikEp/2pkaq6oNJLATOXCAL8+UIAL+ZMJ1jiVI7Q1WBQITj14QgNgbkupX
 1Bg25eS3I3HSmOg1tnUeEzF3N3hK8jlb9lA0HZm9m6RuegFsVIGHfte7xOdRbZki
 dHAVy0xAoBPoXWnUfoekc1/L4AfsBh57GfbIBhf+xZs2eKp7Jw22eVwc9YsdDpc1
 3s6aEbAsQWU7IgSWWEOJMi/q7Z6By7db3dIGLqtwszVvqzjkcszXQZSxjaOHlseK
 j6Ci6yQ3UeG05QviySFyVsOxfHrL5SczYexsbkKE/kXfQZXR7x+GQzjm/BwYvEkO
 Q+gHAbGBI5IM6hTBDLnHkn+WkXYk3EhyTcFykxs2ykJhWsOd9ReBuCTxr4Wey40U
 Q80HYHv/leY=
 =geT0
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM 64-bit DT updates from Arnd Bergmann:
 "A couple of interesting new SoC platforms are now supported, these are
  the respective DTS sources:

   - Samsung Exynos5433 mobile phone platform, including an (almost)
     fully supported phone reference board.
   - Hisilicon Hip07 server platform and D05 board, the latest iteration
     of their product line, now with 64 Cortex-A72 cores across two
     sockets.
   - Allwinner A64 SoC, the first 64-bit chip from their "sunxi" product
     line, used in Android tablets and ultra-cheap development boards
   - NXP LS1046A Communication processor, improving on the earlier
     LS1043A with faster CPU cores
   - Qualcomm MSM8992 (Snapdragon 808) and MSM8994 (Snapdragon 810)
     mobile phone SoCs
   - Early support for the Nvidia Tegra Tegra186 SoC
   - Amlogic S905D is a minor variant of their existing Android consumer
     product line
   - Rockchip PX5 automotive platform, a close relative of their popular
     rk3368 Android tablet chips

  Aside from the respective evaluation platforms for the above chips,
  there are only a few consumer devices and boards added this time:

   - Huawei Nexus 6P (Angler) mobile phone
   - LG Nexus 5x (Bullhead) mobile phone
   - Nexbox A1 and A95X Android TV boxes
   - Pine64 development board based on Allwinner A64
   - Globalscale Marvell ESPRESSOBin community board based on Armada 3700
   - Renesas "R-Car Starter Kit Pro" (M3ULCB) low-cost automotive board

  For the existing platforms, we get bug fixes and new peripheral
  support for Juno, Renesas, Uniphier, Amlogic, Samsung, Broadcom,
  Rockchip, Berlin, and ZTE"

* tag 'armsoc-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (168 commits)
  arm64: dts: fix build errors from missing dependencies
  ARM64: dts: meson-gxbb: add SCPI pre-1.0 compatible
  ARM64: dts: meson-gxl: Add support for Nexbox A95X
  ARM64: dts: meson-gxm: Add support for the Nexbox A1
  ARM: dts: artpec: add pcie support
  arm64: dts: berlin4ct-dmp: add missing unit name to /memory node
  arm64: dts: berlin4ct-stb: add missing unit name to /memory node
  arm64: dts: berlin4ct: add missing unit name to /soc node
  arm64: dts: qcom: msm8916: Add ddr support to sdhc1
  arm64: dts: exynos: Enable HS400 mode for eMMC for TM2
  ARM: dts: Add xo to sdhc clock node on qcom platforms
  ARM64: dts: Add support for Meson GXM
  dt-bindings: add rockchip RK1108 Evaluation board
  arm64: dts: NS2: Add PCI PHYs
  arm64: dts: NS2: enable sdio1
  arm64: dts: exynos: Add the mshc_2 node for supporting T-Flash
  arm64: tegra: Add NVIDIA P2771 board support
  arm64: tegra: Enable PSCI on P3310
  arm64: tegra: Add NVIDIA P3310 processor module support
  arm64: tegra: Add GPIO controllers on Tegra186
  ...
2016-12-15 15:58:28 -08:00
Linus Torvalds
786a72d791 ARM: DT updates for v4.10
Lots of changes as usual, so I'm trying to be brief here. Most of the
 new hardware support has the respective driver changes merged through
 other trees or has had it available for a while, so this is where things
 come together.
 
 We get a DT descriptions for a couple of new SoCs, all of them variants
 of other chips we already support, and usually coming with a new
 evaluation board:
 
 - Oxford semiconductor (now Broadcom) OX820 SoC for NAS devices
 - Qualcomm MDM9615 LTE baseband
 - NXP imx6ull, the latest and smallest i.MX6 application processor variant
 - Renesas RZ/G (r8a7743 and r8a7745) application processors
 - Rockchip PX3, a variant of the rk3188 chip used in Android tablets
 - Rockchip rk1108 single-core application processor
 - ST stm32f746 Cortex-M7 based microcontroller
 - TI DRA71x automotive processors
 
 These are commercially available consumer platforms we now support:
 - Motorola Droid 4 (xt894) mobile phone
 - Rikomagic MK808 Android TV stick based on Rockchips rx3066
 - Cloud Engines PogoPlug v3 based on OX820
 - Various Broadcom based wireless devices:
   - Netgear R8500 router
   - Tenda AC9 router
   - TP-LINK Archer C9 V1
   - Luxul XAP-1510 Access point
 - Turris Omnia open hardware router based on Armada 385
 
 And a couple of new boards targeted at developers, makers
 or industrial integration:
 - Macnica Sodia development platform for Altera socfpga (Cyclone V)
 - MicroZed board based on Xilinx Zynq FPGA platforms
 - TOPEET itop/elite based on exynos4412
 - WP8548 MangOH Open Hardware platform for IOT, based on
   Qualcomm MDM9615
 - NextThing CHIP Pro gadget
 - NanoPi M1 development board
 - AM571x-IDK industrial board based on TI AM5718
 - i.MX6SX UDOO Neo
 - Boundary Devices Nitrogen6_SOM2 (i.MX6)
 - Engicam i.CoreM6
 - Grinn i.MX6UL liteSOM/liteBoard
 - Toradex Colibri iMX6 module
 
 Other changes:
 - added peripherals on renesas, davinci, stm32f429, uniphier, sti,
   mediatek, integrator, at91, imx, vybrid, ls1021a, omap, qualcomm,
   mvebu, allwinner, broadcom, exynos, zynq
 
 - Continued fixes for W=1 dtc warnings
 
 - The old STiH415/416 SoC support gets removed, these never made it into
   products and have served their purpose in the kernel as a template
   for teh newer chips from ST
 
 - The exynos4415 dtsi file is removed as nothing uses it.
 
 - Intel PXA25x can now be booted using devicetree
 
 Conflicts:
 arch/arm/boot/dts/r8a*.dtsi: a node was added
 the clk tree, keep both sides and watch out for git
 dropping the required '};' at the end of each side.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIVAwUAWFMZHGCrR//JCVInAQKQ6A/+Og42qy1rhL3cfHiSsT7e5giQNVSFY7Cm
 Z06R83AEv6HDMTNzyiJr5udRGOhm40qIoe92fhVJSRF7F6o/GbCQ7YOyU4KdQELg
 caqRCe1Nq6RT0RYU0m6xVyv/ox0JTNEaB+TcvD1x4pgUQNo9sSBfiXpTzOKhLhqs
 zmsfpNpj8v188Iofoju3WtwN26riJ7P4QdYIaNaH4qNQgoQbMbQICDwnpSsNJY+x
 MSlNrbtYqfz6vc5fqa0mtfhF6wIFxuRnTgSLi9skWZ2l/fkn4ljF3RhN1Z86TYPv
 CYsqDu+DF0YNxFrht3BAK6WTe2PdCnMNLNnMhYC6NDQ8YG1tbwvXQFM1KVanRvxx
 hXP4Nt2sZYiqA4v8joFPgp9gnyBMdhtJEtWSmHwCY0RFObySJR4I1GY7igh02HUJ
 gxlmOYcmklzLiyXvfjdDvg0sCV1tBhaBKTLYxF7lVCzG2QaR22Le+p3o+SWm+e+V
 Ruc9l/iwHaeasNnbAkDEiEyi1FobtuEeTSZnKaXfKX8WuKVZLJrCEm7WiRIsj0Ww
 vJ9ABVft7PEv/Ov3fbKBWON4vxKTBBgHuEDcbIsp19w4BSH1WJf5bGXIm7QeA3Z9
 aD+DtA5W5ExIjMQR2+qgz/BBIzVVVVvG8DEcdcCtc3JGRJll5PadShLdqKjVIerc
 SpsxqCKoRCI=
 =wJt3
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM DT updates from Arnd Bergmann:
 "Lots of changes as usual, so I'm trying to be brief here. Most of the
  new hardware support has the respective driver changes merged through
  other trees or has had it available for a while, so this is where
  things come together.

  We get a DT descriptions for a couple of new SoCs, all of them
  variants of other chips we already support, and usually coming with a
  new evaluation board:

   - Oxford semiconductor (now Broadcom) OX820 SoC for NAS devices
   - Qualcomm MDM9615 LTE baseband
   - NXP imx6ull, the latest and smallest i.MX6 application processor variant
   - Renesas RZ/G (r8a7743 and r8a7745) application processors
   - Rockchip PX3, a variant of the rk3188 chip used in Android tablets
   - Rockchip rk1108 single-core application processor
   - ST stm32f746 Cortex-M7 based microcontroller
   - TI DRA71x automotive processors

  These are commercially available consumer platforms we now support:

   - Motorola Droid 4 (xt894) mobile phone
   - Rikomagic MK808 Android TV stick based on Rockchips rx3066
   - Cloud Engines PogoPlug v3 based on OX820
   - Various Broadcom based wireless devices:
      - Netgear R8500 router
      - Tenda AC9 router
      - TP-LINK Archer C9 V1
      - Luxul XAP-1510 Access point
   - Turris Omnia open hardware router based on Armada 385

  And a couple of new boards targeted at developers, makers or
  industrial integration:

   - Macnica Sodia development platform for Altera socfpga (Cyclone V)
   - MicroZed board based on Xilinx Zynq FPGA platforms
   - TOPEET itop/elite based on exynos4412
   - WP8548 MangOH Open Hardware platform for IOT, based on Qualcomm MDM9615
   - NextThing CHIP Pro gadget
   - NanoPi M1 development board
   - AM571x-IDK industrial board based on TI AM5718
   - i.MX6SX UDOO Neo
   - Boundary Devices Nitrogen6_SOM2 (i.MX6)
   - Engicam i.CoreM6
   - Grinn i.MX6UL liteSOM/liteBoard
   - Toradex Colibri iMX6 module

  Other changes:

   - added peripherals on renesas, davinci, stm32f429, uniphier, sti,
     mediatek, integrator, at91, imx, vybrid, ls1021a, omap, qualcomm,
     mvebu, allwinner, broadcom, exynos, zynq

   - Continued fixes for W=1 dtc warnings

   - The old STiH415/416 SoC support gets removed, these never made it
     into products and have served their purpose in the kernel as a
     template for teh newer chips from ST

   - The exynos4415 dtsi file is removed as nothing uses it.

   - Intel PXA25x can now be booted using devicetree"

* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (422 commits)
  arm: dts: zynq: Add MicroZed board support
  ARM: dts: da850: enable high speed for mmc
  ARM: dts: da850: Add node for pullup/pulldown pinconf
  ARM: dts: da850: enable memctrl and mstpri nodes per board
  ARM: dts: da850-lcdk: Add ethernet0 alias to DT
  ARM: dts: artpec: add pcie support
  ARM: dts: add support for Turris Omnia
  devicetree: Add vendor prefix for CZ.NIC
  ARM: dts: berlin2q-marvell-dmp: fix typo in chosen node
  ARM: dts: berlin2q-marvell-dmp: fix regulators' name
  ARM: dts: Add xo to sdhc clock node on qcom platforms
  ARM: dts: r8a7794: Add device node for PRR
  ARM: dts: r8a7793: Add device node for PRR
  ARM: dts: r8a7792: Add device node for PRR
  ARM: dts: r8a7791: Add device node for PRR
  ARM: dts: r8a7790: Add device node for PRR
  ARM: dts: r8a7779: Add device node for PRR
  ARM: dts: r8a73a4: Add device node for PRR
  ARM: dts: sk-rzg1e: add Ether support
  ARM: dts: sk-rzg1e: initial device tree
  ...
2016-12-15 15:50:24 -08:00
Linus Torvalds
6df8b74b17 DeviceTree updates for 4.10:
- Add various vendor prefixes.
 
 - Fix NUMA node handling when "numa=off" is passed on kernel command
   line.
 
 - Coding style Clean-up of overlay handling code.
 
 - DocBook fixes in DT platform driver code
 
 - Altera SoCFPGA binding addtions for freeze bridge, arria10 FPGA
   manager and FPGA bridges.
 
 - Couple of printk message fixes.
 -----BEGIN PGP SIGNATURE-----
 
 iQItBAABCAAXBQJYUqo6EBxyb2JoQGtlcm5lbC5vcmcACgkQ+vtdtY28YcMHiw//
 WIJH6XF8PkAEkITxChwb3kJ1y7PCtR7YmncMvnMRh9kIcyPwFjiDRqUz/0MiTHgD
 UJsFtX6057GWDd0mlUrQ8iFFlzdGLl2Xw4u6sr4bC7bGVK0Nj9QX+xrFmXCLtGj0
 wYkXIJXDXmLQJPKhG5np5jBYfJIaYr5FcNCwdOEljDDauHAg6f2hvgOby1X8FCOS
 oC3LCqvx4SWp9EcQAvOkKAJazsIlSAynb7EFwTaKo0RHJPzX/Uhp7RmyvAgeVZVE
 a2GS+YwboD3PMa7cjC3R7FwBXhuM/YQLLWfgSGwvr8nADP4a/iZNzJt1H0rU1LKP
 ukgSP5m58bt713H7Gr6OJ1ygAFmvFAzye+mXwHVxwqg3BFp141LCKoD0A2RO+zH8
 5cma2OTl9bQSWxtKJyLm4y9/QegaThyM/eZyk5j6XOjIEtlTS0h8H3ZHbU55k1HC
 7MJrnoAb3z5vGhxPplF1MOeGswz5vLME0e74Po0Nt8X7sdpj7zVWBL8AZh+Xyw2O
 d6oz9xYQVgJ5mqnnXXTWSqNfTM82+aUZV6SREaOJ1GjSy3pfd2s85N1oB8oIOb+o
 gRNYibbv/EvaOBqADwQoRWRTIW+0Vtf/vY1xVFB6Wd8XO2a/dmHZJ95jaPlAfwf3
 l5EqgsHP1kirkNYgCAUSpCkPf61gA+ZAWxjlfrARmCg=
 =1Sex
 -----END PGP SIGNATURE-----

Merge tag 'devicetree-for-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

Pull DeviceTree updates from Rob Herring:

 - add various vendor prefixes.

 - fix NUMA node handling when "numa=off" is passed on kernel command
   line.

 - coding style Clean-up of overlay handling code.

 - DocBook fixes in DT platform driver code

 - Altera SoCFPGA binding addtions for freeze bridge, arria10 FPGA
   manager and FPGA bridges.

 - a couple of printk message fixes.

* tag 'devicetree-for-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (33 commits)
  dt: pwm: bcm2835: fix typo in clocks property name
  devicetree: add vendor prefix for National Instruments
  Revert "of: base: add support to get machine model name"
  of: Fix issue where code would fall through to error case.
  drivers/of: fix missing pr_cont()s in of_print_phandle_args
  devicetree: bindings: Add vendor prefix for Oki
  devicetree: bindings: Add vendor prefix for Andes Technology Corporation
  dt-bindings: add MYIR Tech hardware vendor prefix
  add bindings document for altera freeze bridge
  ARM: socfpga: add bindings doc for arria10 fpga manager
  ARM: socfpga: add bindings document for fpga bridge drivers
  of: base: add support to get machine model name
  of/platform: clarify of_find_device_by_node refcounting
  of/platform: fix of_platform_device_destroy comment
  of: Remove unused variable overlay_symbols
  of: Move setting of pointer to beside test for non-null
  of: Add back an error message, restructured
  of: Update comments to reflect changes and increase clarity
  of: Remove redundant size check
  of: Update structure of code to be clearer, also remove BUG_ON()
  ...
2016-12-15 11:49:41 -08:00
Linus Torvalds
0f1d6dfe03 Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
 "Here is the crypto update for 4.10:

  API:
   - add skcipher walk interface
   - add asynchronous compression (acomp) interface
   - fix algif_aed AIO handling of zero buffer

  Algorithms:
   - fix unaligned access in poly1305
   - fix DRBG output to large buffers

  Drivers:
   - add support for iMX6UL to caam
   - fix givenc descriptors (used by IPsec) in caam
   - accelerated SHA256/SHA512 for ARM64 from OpenSSL
   - add SSE CRCT10DIF and CRC32 to ARM/ARM64
   - add AEAD support to Chelsio chcr
   - add Armada 8K support to omap-rng"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (148 commits)
  crypto: testmgr - fix overlap in chunked tests again
  crypto: arm/crc32 - accelerated support based on x86 SSE implementation
  crypto: arm64/crc32 - accelerated support based on x86 SSE implementation
  crypto: arm/crct10dif - port x86 SSE implementation to ARM
  crypto: arm64/crct10dif - port x86 SSE implementation to arm64
  crypto: testmgr - add/enhance test cases for CRC-T10DIF
  crypto: testmgr - avoid overlap in chunked tests
  crypto: chcr - checking for IS_ERR() instead of NULL
  crypto: caam - check caam_emi_slow instead of re-lookup platform
  crypto: algif_aead - fix AIO handling of zero buffer
  crypto: aes-ce - Make aes_simd_algs static
  crypto: algif_skcipher - set error code when kcalloc fails
  crypto: caam - make aamalg_desc a proper module
  crypto: caam - pass key buffers with typesafe pointers
  crypto: arm64/aes-ce-ccm - Fix AEAD decryption length
  MAINTAINERS: add crypto headers to crypto entry
  crypt: doc - remove misleading mention of async API
  crypto: doc - fix header file name
  crypto: api - fix comment typo
  crypto: skcipher - Add separate walker for AEAD decryption
  ..
2016-12-14 13:31:29 -08:00
Linus Torvalds
b78b499a67 Char/Misc driver patches for 4.10-rc1
Here's the big char/misc driver patches for 4.10-rc1.  Lots of tiny
 changes over lots of "minor" driver subsystems, the largest being some
 new FPGA drivers.  Other than that, a few other new drivers, but no new
 driver subsystems added for this kernel cycle, a nice change.
 
 All of these have been in linux-next with no reported issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWFAtwA8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ykyCgCeJn36u1AsBi7qZ3u/1hwD8k56s2IAnRo6U31r
 WW65YcNTK7qYXqNbfgIa
 =/t/V
 -----END PGP SIGNATURE-----

Merge tag 'char-misc-4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc driver updates from Greg KH:
 "Here's the big char/misc driver patches for 4.10-rc1. Lots of tiny
  changes over lots of "minor" driver subsystems, the largest being some
  new FPGA drivers. Other than that, a few other new drivers, but no new
  driver subsystems added for this kernel cycle, a nice change.

  All of these have been in linux-next with no reported issues"

* tag 'char-misc-4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (107 commits)
  uio-hv-generic: store physical addresses instead of virtual
  Tools: hv: kvp: configurable external scripts path
  uio-hv-generic: new userspace i/o driver for VMBus
  vmbus: add support for dynamic device id's
  hv: change clockevents unbind tactics
  hv: acquire vmbus_connection.channel_mutex in vmbus_free_channels()
  hyperv: Fix spelling of HV_UNKOWN
  mei: bus: enable non-blocking RX
  mei: fix the back to back interrupt handling
  mei: synchronize irq before initiating a reset.
  VME: Remove shutdown entry from vme_driver
  auxdisplay: ht16k33: select framebuffer helper modules
  MAINTAINERS: add git url for fpga
  fpga: Clarify how write_init works streaming modes
  fpga zynq: Fix incorrect ISR state on bootup
  fpga zynq: Remove priv->dev
  fpga zynq: Add missing \n to messages
  fpga: Add COMPILE_TEST to all drivers
  uio: pruss: add clk_disable()
  char/pcmcia: add some error checking in scr24x_read()
  ...
2016-12-13 12:11:01 -08:00
Linus Torvalds
72cca7baf4 Staging/IIO patches for 4.10-rc1
Here's the "big" staging/iio pull request for 4.10-rc1.
 
 Not as big as 4.9 was, but still just over a thousand changes.  We
 almost broke even of lines added vs. removed, as the slicoss driver was
 removed (got a "clean" driver for the same hardware through the netdev
 tree), and some iio drivers were also dropped, but I think we ended up
 adding a few thousand lines to the source tree in the end.  Other than
 that it's a lot of minor fixes all over the place, nothing major stands
 out at all.
 
 All of these have been in linux-next for a while.  There will be a merge
 conflict with Al's vfs tree in the lustre code, but the resolution for
 that should be pretty simple, that too has been in linux-next.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWFAk1Q8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ymikACg05b0h/iVTTH18474PXXnzw6jk9IAn0gI2fx9
 cqp2MglTvphhrXzddL7V
 =MeTw
 -----END PGP SIGNATURE-----

Merge tag 'staging-4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull staging/IIO updates from Greg KH:
 "Here's the "big" staging/iio pull request for 4.10-rc1.

  Not as big as 4.9 was, but still just over a thousand changes. We
  almost broke even of lines added vs. removed, as the slicoss driver
  was removed (got a "clean" driver for the same hardware through the
  netdev tree), and some iio drivers were also dropped, but I think we
  ended up adding a few thousand lines to the source tree in the end.
  Other than that it's a lot of minor fixes all over the place, nothing
  major stands out at all.

  All of these have been in linux-next for a while. There will be a
  merge conflict with Al's vfs tree in the lustre code, but the
  resolution for that should be pretty simple, that too has been in
  linux-next"

* tag 'staging-4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (1002 commits)
  staging: comedi: comedidev.h: Document usage of 'detach' handler
  staging: fsl-mc: remove unnecessary info prints from bus driver
  staging: fsl-mc: add sysfs ABI doc
  staging/lustre/o2iblnd: Fix misspelled attemps->attempts
  staging/lustre/o2iblnd: Fix misspelling intialized->intialized
  staging/lustre: Convert all bare unsigned to unsigned int
  staging/lustre/socklnd: Fix whitespace problem
  staging/lustre/o2iblnd: Add missing space
  staging/lustre/lnetselftest: Fix potential integer overflow
  staging: greybus: audio_module: remove redundant OOM message
  staging: dgnc: Fix lines longer than 80 characters
  staging: dgnc: fix blank line after '{' warnings.
  staging/android: remove Sync Framework tasks from TODO
  staging/lustre/osc: Revert erroneous list_for_each_entry_safe use
  staging: slicoss: remove the staging driver
  staging: lustre: libcfs: remove lnet upcall code
  staging: lustre: remove set but unused variables
  staging: lustre: osc: set lock data for readahead lock
  staging: lustre: import: don't reconnect during connect interpret
  staging: lustre: clio: remove mtime check in vvp_io_fault_start()
  ...
2016-12-13 11:35:00 -08:00
Nathan Sullivan
1a85ff5904 devicetree: add vendor prefix for National Instruments
Signed-off-by: Nathan Sullivan <nathan.sullivan@ni.com>
Signed-off-by: Rob Herring <robh@kernel.org>
2016-12-09 15:03:47 -06:00
Geert Uytterhoeven
5f01f26375 devicetree: bindings: Add vendor prefix for Oki
Already in use for "oki,ml86v7667".

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Rob Herring <robh@kernel.org>
2016-12-09 10:27:45 -06:00
Greentime Hu
e0e3a19c18 devicetree: bindings: Add vendor prefix for Andes Technology Corporation
Add vendor-prefix for Andes Technology Corporation

Signed-off-by: Greentime Hu <green.hu@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
2016-12-09 10:20:22 -06:00
Vladimir Zapolskiy
5f16e80449 dt-bindings: add MYIR Tech hardware vendor prefix
MYIR Tech Limited offers a range of ARM powered development boards and SoMs,
for details reference a list on http://elinux.org/Development_Platforms#ARM
or company's website http://myirtech.com

Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Rob Herring <robh@kernel.org>
2016-12-03 15:32:07 -06:00
Arnd Bergmann
f76d02e2d1 mvebu dt for 4.10 (part 1)
Add Turris Omnia support, an open hardware router Armada 385 based
 -----BEGIN PGP SIGNATURE-----
 
 iGoEABECACoFAlg5WBkjHGdyZWdvcnkuY2xlbWVudEBmcmVlLWVsZWN0cm9ucy5j
 b20ACgkQCwYYjhRyO9V4SwCeI0Ts8X8KIm6RWQgpwls8NJMM8sQAnRajp/psJgWF
 5Rvn8aOROyyKIAkY
 =N1hs
 -----END PGP SIGNATURE-----

Merge tag 'mvebu-dt-4.10-2' of git://git.infradead.org/linux-mvebu into next/dt

Pull "mvebu dt for 4.10 (part 1)" from Gregory CLEMENT:

Add Turris Omnia support, an open hardware router Armada 385 based

* tag 'mvebu-dt-4.10-2' of git://git.infradead.org/linux-mvebu:
  ARM: dts: add support for Turris Omnia
  devicetree: Add vendor prefix for CZ.NIC
2016-11-30 23:46:47 +01:00
Uwe Kleine-König
c0214039bd devicetree: Add vendor prefix for CZ.NIC
Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2016-11-25 16:43:08 +01:00
Olof Johansson
adc8f25f63 Amlogic DT changes for 64-bit platforms for v4.10
Support for new drivers:
 - USB
 - i2c
 - SPI
 - mailbox/MHU
 - PWM
 - ethernet MAC, PHY
 - secure monitor
 - IR
 - watchdog
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJYK5ljAAoJEFk3GJrT+8Zlm0wP/jAQ3dexIVIhuk6xwnYDnVSD
 dTRXQwvZcARzogbiMxK1sIqamDe/jZveAJg6Wd9KvlqmW76XP2Npyk3/d4SZXzFx
 S4Dj0g91XlUMhZP/50DRfMqQ9ylvcCtPSd6ITp7sUX4VMbVoZYpxTFUlg1askC4V
 0Rts7tqAYmWCHBfcRrUXG9M8p1NxaeljxqBRKD5gU2E5zh/A8TU+eUnJqDuyN8hR
 4OF19ceOsh/IVVKjwbQsTqHdGMvYCN9Fw26GA7mb40foOum4o5ET8IydNd37aAD5
 D8i67djmd2SYlCqOYG8B9V8PU4bIPOvAPvkY6/FB3QKKYcIzJvBmDaqyHUNQzP5K
 gqxqTcAZr/ERI7Wh122+MhjvL2cV0WUjHY5LVqkK0B2bluLJqC8aqUg2d9TftVAc
 +nmsfAZhKz5l77rL4dHIfo9EPNDI5tzTGyxgyU8DsogTmHiEVGHnUF2ekORwls3q
 wbBVDr2RIB4ucEF3eFmJYjNBIKLNebLtirYRjDbtIQofvR6ZxjRcra8YopNnkVaU
 0hlghavZhTXF0UQvm3D2ySfaaZg94LpKiG3XLvj4+4hNsdTH5/KsxNbNm2MYRssZ
 fFYV0P2Aymp0nO/sDpomVZDGZiqF7WS4Txj51/892ogC4E1ZrtMnW56RCQ52p5Ns
 OnMHREDpNUg/zTFW5ka2
 =32ah
 -----END PGP SIGNATURE-----

Merge tag 'amlogic-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into next/dt64

Amlogic DT changes for 64-bit platforms for v4.10

Support for new drivers:
- USB
- i2c
- SPI
- mailbox/MHU
- PWM
- ethernet MAC, PHY
- secure monitor
- IR
- watchdog

* tag 'amlogic-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: (27 commits)
  ARM64: dts: meson-gxbb-vega-s95: Add SD/SDIO/MMC and PWM nodes
  ARM64: dts: meson-gxl-s905x: Enable internal ethernet PHY
  ARM64: dts: meson-gxl-p23x: Enable ethernet
  ARM64: dts: meson-gxl: Add ethernet nodes with internal PHY
  ARM64: dts: amlogic: Reorder copyrights for meson-gx
  ARM64: dts: meson-gxl-p23x: Enable IR receiver
  ARM64: dts: meson-gxl-p23x: Add SD/SDIO/MMC and PWM nodes
  ARM64: dts: meson-gxl-p23x: Add uart pinctrl
  ARM64: dts: meson-gxl: Add MMC/SD/SDIO nodes
  ARM64: dts: meson-gxl: Add i2c nodes
  ARM64: dts: meson-gxl: Add clock nodes
  ARM64: dts: meson-gxl: Add pinctrl nodes
  ARM64: dts: meson-gxbb: Move common nodes to meson-gx
  ARM64: dts: meson-gxbb: Add SCPI with cpufreq & sensors Nodes
  ARM64: dts: meson-gxbb: Add SRAM node
  ARM64: dts: meson-gxbb: Add MMC nodes to Nexbox A95x
  ARM64: dts: meson-gxbb: Add P20x Wifi SDIO support
  ARM64: dts: meson-gxbb: Add Wifi 32K clock for p20x boards
  ARM64: dts: meson-gxbb: add MMC support
  ARM64: dts: meson-gxbb-odroidc2: Enable USB Nodes
  ...

Signed-off-by: Olof Johansson <olof@lixom.net>
2016-11-18 16:50:59 -08:00
Fabio Estevam
2092c1dbf3 dt-bindings: Add vendor prefix for Udoo
Udoo (http://www.udoo.org/) manufactures development boards based on
i.MX and x86.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Rob Herring <robh@kernel.org>
2016-11-15 09:17:11 -06:00
Dinh Nguyen
d731cb8e6f dt-bindings: Add vendor prefix for Samtec
Add a vendor prefix for Samtec, a Softing company.

http://www.samtec.de
http://www.samtec.org

Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
2016-11-15 09:17:11 -06:00
Dinh Nguyen
d4240fdb55 dt-bindings: Add vendor prefix for Terasic Inc.
Add a vendor prefix for Terasic.

http://www.terasic.com

Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
2016-11-15 09:17:11 -06:00
Dinh Nguyen
636ffc630c dt-bindings: Add Macnica Americas vendor prefix
Add a vendor prefix for the Macnica company.
http://http://www.macnica.com

Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
2016-11-15 09:17:10 -06:00
Marek Vasut
c6e106b85c of: Add vendor prefix for Aries Embedded GmbH
Add vendor prefix for Aries Embedded GmbH
http://www.aries-embedded.de/

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Rob Herring <robh@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
2016-11-15 09:17:10 -06:00
Peter Rosin
ff6bd170c0 dt-bindings: add axentia to vendor-prefixes
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-11-13 11:40:27 +00:00
Andre Przywara
bc13d8feb6 Documentation: devicetree: add vendor prefix for Pine64
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Chen-Yu Tsai <wens@csie.org>
[Maxime: Change title prefix to match the usual style]
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-11-03 09:07:29 +01:00
Robin van der Gracht
f2303f709f of: add vendor prefix for Holtek Semiconductor
This patch introduces a vendor prefix for Holtek Semiconductor Inc.

Signed-off-by: Robin van der Gracht <robin@protonic.nl>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-31 04:00:09 -06:00
Greg Kroah-Hartman
c7c88e998a First round of IIO new device support, features and cleanups for the 4.10 cycle.
Fair number of outreachy related patches in here. Some of these may well
 have already been picked up by Greg but git will sort that out for us.
 
 Also some good staging cleanup work from other sources. Thanks Brian and Lars
 in particular for this.
 
 New device support
 * ACCES 104-quad-8
   - New driver for this 8 channel encoder input board. Lots of new ABI with
     this one.
 * AD7766
   - New driver supporting AD7766, AD7766-1, AD7766-2, AD7767, AD7767-1 and
     AD7767-2 24 bit ADCs.
 * dmard 10
   - New driver for this 3 axis accelerometer.
 * Honeywell ABP pressure sensors.
   - New driver covering 56 parts in this series (too many to list here!)
 * HTS221
   - New driver to support this relative humidiy and temperature device.
 * LMP91000
   - New driver for this potentiostat (form of chemical sensor). Nice example
     of use of the buffered consumer interfaces and the use of a consumer
     provided trigger.
 * MiraMEMS DA311
   - New driver for this 3 axis accelerometer.
 * MiraMEMS DA280
   - New driver for this 3 axis accelerometer. Follow up caught up with
   vendor prefixes for these.
 
 Staging graduations
 * isl29018 light sensor
   - Fixes and cleanups listed below (thanks for your hard work on this Brian!)
 * sca3000
   - Fixes and cleanups listed below.  This was one of the small set of drivers
   that went into staging when IIO was first added.  Turns out it had a few
   bugs and needed to be brought into the modern era!  Not clear if I am
   the only person who actually has one of these still wired to a board.
 
 New features (Core)
  - Add an iio_trigger_validate_own_device helper which relies on the device
    and trigger having the same parent.  Convenient to have this for some
    of the more complex trigger / device interactions. Was hand rolled in
    a few drivers already so good to bring it into the core.
  - Add an iio_read_channel_offset in kernel access helper (similar to
    the existing one for scale).
  - IIO_ATTR_{RO, WO, RW} and IIO_DEVICE_ATTR_{RO, WO, RW} macros.  These
    lead some rather contrived function naming, but there is no denying they
    do reduced boilerplate.  I'm going to resist their introduction in
    drivers 'unless' they form part of a larger set of cleanups.
  - Counter channel type and index type.
 
 New features (Drivers)
 * hdc100x
   - Triggered buffer support.
 * mcp4725
   - Device tree bindings and support.
   - Voltage reference selection.
 * ti-adc0832
   - Triggered buffer support.
 * ti-adc161s626
   - Add regulator support allowing _scale and _offset values to be established
   and exported.
 
 New features (Tools)
 * iio_generic_buffer
   - -A option to force enable all channels rather than faulting if some are
   already enabled (like -a does).  Followup patches tidied this support up.
 
 Cleanups (Core)
  - Use kmalloc_array in iio_scan_mask_set.
  - Take event_attrs field of iio_info structure constant
  - Staging todo list updates. Most of it was long done.
  - MAINTAINERS had a wrong directory listing.
 
 Cleanups (Drivers)
 * Missing i2c trivial devices entries.
 * ad5592r
   - Fix an endian type related sparse warnings.
 * ad7150
   - Constify the event attribute_group structures.
 * ad7152
   - Add some blank lines to improve readability.
   - Sampling frequency control via chan-info element rather than hand rolled
   attributes.
   - add a new lock to avoid use of mlock for non state change related locking.
 * ad7280
   - Constify atrribute_group structure (second patch covers the event ones)
 * ad7606 (Lars is driving most of the cleanup on this with some additions from
   Eva)
   - Fix improper setting of oversampling pins.  This has been broken a very
   long time in this staging driver, so not going to push this back to stable.
   - Implement oversampling configuration via the chan_info mask element.
   - Remove an unused int_vref_mv field.
   - Remove a reundant name field from ad7606_chip_info.
   - Remove default device configuration from platform_data in favour of
   whatever the power on defaults are.
   - Remove out of band error reporting in the kernel log as not providing
   much information.
   - Fix oversampling ratio by having 1 be the value for no oversampling.
   - Avoid allocating buffer for each data capture.
   - Factor out common code between periodic and one-shot capture.
   - Move set_drvdat into common code.
   - Let the common probe function return int rather than jumping through
   an ERR_PTR.
   - Pass struct device * into common remove to simplify code.
   - Always run trigger handler only once per event (no one can remember why
   it was being possibly done twice).
   - Move over to the GPIO descriptor API to shorten and clarify code.
   - Move the buffer code into the main file as it's not optional and is
   now rather short in this driver.
   - Fix the naming of the supply regulator.
   - Rework regulator handling to handle errors including deferred probing.
   - Tidy up a ptr_err or 0 return.
 * ad7746
   - Sampling frequency control via info_mask element rather than hand rolled
 * ad7758
   - Sampling frequency control via info_mask element rather than hand rolled
   attributes.
 * ad7816
   - Constify the event attribute_group structure.
 * adt7316
   - Constify the event attribute group structures.
 * ak8974
   - Cleanup some sparse warnings about endian types.
 * ak8975
   - Cleanup some sparse warnings about endian types.
 * bmi160
   - Spare endian warning cleanups.
 * isl29018 (towards staging graduation)
   - Remove unusedvariables and defines.
   - Improve consistency of error handling.
   - Signed / unsigned comparison fixes.
   - Use the IIO_DEVICE_ATTR_{RO, RW} macros
   - Fix a race in in_illuminance_scale_available_show.
   - Cleanup exit points of _read_raw
   - Sanity check if in suspended state during a write_raw call as was already
     done for read_raw.
   - Document device tree bidnings.
   - Document infrared supression controls.
   - Add some newlines to improve readability and drop one that shouldn't be
     there.
   - Fix a poorly named functions name.
   - Fix multiline coment syntax.
   - Tidy up a pair or return statements by unifying them.
   - Rename description in Kconfig for consistency with similar drivers.
 * lidar
   - cleanup power management by dropping unnecessary call.
 * ltr501
   - Use the claim_direct_mode helpers. Fix a race condition along the way.
 * max1027
   - Fix a dubious x | !y sparse warning.
   - Use the new iio_trigger_validate_own_device helper.
 * max440000
   - Clean up some sparse warnings about endian types.
 * mcp4725
   - Use the regulator framework to establish the reference voltage rather than
     getting it from platform data.
   - Tidy up a comment typo.
   - Fix a wrong PTR_ERR query (wrong regulator).
 * mma7660
   - Take a mma7660_nscale static.
 * mma8452
   - Use the new iio_trigger_validate_own_device helper.
   - Use claim_direct_mode helpers - fix a race condition along the way.
 * mpl3115
   - Use claim_direct_mode helpers - fix a race condition along the way.
 * ms65611
   - Tidy up regulator error handling and clean out a static warning in the mix.
 * sca3000
   - Avoid a potential unitialized variable if a hardware read returns a value
   that isn't actually supported (mostly warning supression).
   - Fix a use before setting of the indio_dev->buffer pointer. Broken for
   a very long time so not going to rush this into stable.
   - Merge buffer file with core file.  We used to always split these.
   Sometimes it's just not worth the hassle. In this case the device's main
   feature is it's hardware fifos so unlikely anyone would want to run it
   without.
   - Drop the sca3000_register_ring_funcs function as it's a pointless wrapper
   once we have only one file.
   - Fix cleaning of flag + setting of size of scan. Without this you can't
   start the buffer twice and expect sensible (or any) results.  Again,
   broken for a long time so not heading for stable.
   - Drop the custom watershed setting ABI - for now we'll just support one
   value.
   - Move to a hybrid hard / soft buffer design (how we've been doing it
   for similar devices for a while now!)
   - Cleanup some unusued variables.
   - Use a fake channel to support core handling of freefall event registration.
   - Cleanup the register defines.
   - Fix an off by one error in axis due to IIO_NO_MOD taking up the 0 value.
   Been broken since first admission of IIO to the staging tree.
   - Add readback of the 3db low pass filter frequency and later writing
     allowing droppign of custom measurement mode attributes as they can
     be represented by the filter choices that is their main characteristic.
   - Drop non standard revision attr and replace with dev_info on probe.
   - Avoid a race in probe.
   - Various formatting fixes.
   - Kernel-docify docs that were very nearly in the write format.
 * tsl2583
   - Constify attribute_group structure.
 * zpa2326
   - Drop a redundant DEBUG ifdef.
 
 Cleanups (Tools)
 * iio_generic_buffer
   - Fix the ? arguement. Previously it sort of worked as you got the help
     message as a result of it not recognising the arguement.
 -----BEGIN PGP SIGNATURE-----
 
 iQIuBAABCAAYBQJYDSX+ERxqaWMyM0BrZXJuZWwub3JnAAoJEFSFNJnE9BaIQSEP
 /2HRMqDXeIh2N0oVLBFK5pEaAZ52tjsEmf1XgfCJ3D1PczS0vzqkFKuG/078BU3v
 e9MTj39sF1EOyGJv4mdfnHygLPvjaTU/A6HoIaP1t9cUgSQ1jzPN0tO8/Hj/ESlU
 U3mNgUNUIa9cnVIfWk2cPJqgKJ/w52vRk00yRnOKZjHZkxbYQq9rPJ7ks12jQSGT
 IBEipiYMnRovc2w4NWbAry5pAXBmttVFKyi5FZ7uIM5EH34+SAY6laXSoZQl8E74
 LKgIwdPUn9yeujyX6ohBFRFloOf/4VYedV6NIUz8k5BzuTeAJcp4DSMLXSWIwZVd
 sdza6el3Tt0MkjIgioTg7N07FvatbQVIsnWnLjLb/zpMjGQPigfTnIi7kYcH3wHx
 NwpTy1MZg5U571LOYXsEhNvIFiQICoV6+8d/PzrO1J+rphuQYreOm0WzjvIqW4q/
 dU2uCAMOHd82gjm9QrKjvrc+4M3oGc3ENE/i5P2YNQhdkdNKp9PMWgL6RO9QXgeQ
 9TrjbDr9OSFLatZg5IswWFa5CHL9AZ6OuvaRyx/8n5cBdY3n8+wMIowRQJlMUdGY
 Aa5ByntMsvhwCu+M1+fDihZyx4suTNvW7+Emqd/8lCb+BRjHoamBb6uGBGx6Txvy
 6TPluNWE+cK5Tjkrn+jDbTzhwdaaSRtO4ECRwxXYAqfn
 =ZRUt
 -----END PGP SIGNATURE-----

Merge tag 'iio-for-4.10a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

First round of IIO new device support, features and cleanups for the 4.10 cycle.

Fair number of outreachy related patches in here. Some of these may well
have already been picked up by Greg but git will sort that out for us.

Also some good staging cleanup work from other sources. Thanks Brian and Lars
in particular for this.

New device support
* ACCES 104-quad-8
  - New driver for this 8 channel encoder input board. Lots of new ABI with
    this one.
* AD7766
  - New driver supporting AD7766, AD7766-1, AD7766-2, AD7767, AD7767-1 and
    AD7767-2 24 bit ADCs.
* dmard 10
  - New driver for this 3 axis accelerometer.
* Honeywell ABP pressure sensors.
  - New driver covering 56 parts in this series (too many to list here!)
* HTS221
  - New driver to support this relative humidiy and temperature device.
* LMP91000
  - New driver for this potentiostat (form of chemical sensor). Nice example
    of use of the buffered consumer interfaces and the use of a consumer
    provided trigger.
* MiraMEMS DA311
  - New driver for this 3 axis accelerometer.
* MiraMEMS DA280
  - New driver for this 3 axis accelerometer. Follow up caught up with
  vendor prefixes for these.

Staging graduations
* isl29018 light sensor
  - Fixes and cleanups listed below (thanks for your hard work on this Brian!)
* sca3000
  - Fixes and cleanups listed below.  This was one of the small set of drivers
  that went into staging when IIO was first added.  Turns out it had a few
  bugs and needed to be brought into the modern era!  Not clear if I am
  the only person who actually has one of these still wired to a board.

New features (Core)
 - Add an iio_trigger_validate_own_device helper which relies on the device
   and trigger having the same parent.  Convenient to have this for some
   of the more complex trigger / device interactions. Was hand rolled in
   a few drivers already so good to bring it into the core.
 - Add an iio_read_channel_offset in kernel access helper (similar to
   the existing one for scale).
 - IIO_ATTR_{RO, WO, RW} and IIO_DEVICE_ATTR_{RO, WO, RW} macros.  These
   lead some rather contrived function naming, but there is no denying they
   do reduced boilerplate.  I'm going to resist their introduction in
   drivers 'unless' they form part of a larger set of cleanups.
 - Counter channel type and index type.

New features (Drivers)
* hdc100x
  - Triggered buffer support.
* mcp4725
  - Device tree bindings and support.
  - Voltage reference selection.
* ti-adc0832
  - Triggered buffer support.
* ti-adc161s626
  - Add regulator support allowing _scale and _offset values to be established
  and exported.

New features (Tools)
* iio_generic_buffer
  - -A option to force enable all channels rather than faulting if some are
  already enabled (like -a does).  Followup patches tidied this support up.

Cleanups (Core)
 - Use kmalloc_array in iio_scan_mask_set.
 - Take event_attrs field of iio_info structure constant
 - Staging todo list updates. Most of it was long done.
 - MAINTAINERS had a wrong directory listing.

Cleanups (Drivers)
* Missing i2c trivial devices entries.
* ad5592r
  - Fix an endian type related sparse warnings.
* ad7150
  - Constify the event attribute_group structures.
* ad7152
  - Add some blank lines to improve readability.
  - Sampling frequency control via chan-info element rather than hand rolled
  attributes.
  - add a new lock to avoid use of mlock for non state change related locking.
* ad7280
  - Constify atrribute_group structure (second patch covers the event ones)
* ad7606 (Lars is driving most of the cleanup on this with some additions from
  Eva)
  - Fix improper setting of oversampling pins.  This has been broken a very
  long time in this staging driver, so not going to push this back to stable.
  - Implement oversampling configuration via the chan_info mask element.
  - Remove an unused int_vref_mv field.
  - Remove a reundant name field from ad7606_chip_info.
  - Remove default device configuration from platform_data in favour of
  whatever the power on defaults are.
  - Remove out of band error reporting in the kernel log as not providing
  much information.
  - Fix oversampling ratio by having 1 be the value for no oversampling.
  - Avoid allocating buffer for each data capture.
  - Factor out common code between periodic and one-shot capture.
  - Move set_drvdat into common code.
  - Let the common probe function return int rather than jumping through
  an ERR_PTR.
  - Pass struct device * into common remove to simplify code.
  - Always run trigger handler only once per event (no one can remember why
  it was being possibly done twice).
  - Move over to the GPIO descriptor API to shorten and clarify code.
  - Move the buffer code into the main file as it's not optional and is
  now rather short in this driver.
  - Fix the naming of the supply regulator.
  - Rework regulator handling to handle errors including deferred probing.
  - Tidy up a ptr_err or 0 return.
* ad7746
  - Sampling frequency control via info_mask element rather than hand rolled
* ad7758
  - Sampling frequency control via info_mask element rather than hand rolled
  attributes.
* ad7816
  - Constify the event attribute_group structure.
* adt7316
  - Constify the event attribute group structures.
* ak8974
  - Cleanup some sparse warnings about endian types.
* ak8975
  - Cleanup some sparse warnings about endian types.
* bmi160
  - Spare endian warning cleanups.
* isl29018 (towards staging graduation)
  - Remove unusedvariables and defines.
  - Improve consistency of error handling.
  - Signed / unsigned comparison fixes.
  - Use the IIO_DEVICE_ATTR_{RO, RW} macros
  - Fix a race in in_illuminance_scale_available_show.
  - Cleanup exit points of _read_raw
  - Sanity check if in suspended state during a write_raw call as was already
    done for read_raw.
  - Document device tree bidnings.
  - Document infrared supression controls.
  - Add some newlines to improve readability and drop one that shouldn't be
    there.
  - Fix a poorly named functions name.
  - Fix multiline coment syntax.
  - Tidy up a pair or return statements by unifying them.
  - Rename description in Kconfig for consistency with similar drivers.
* lidar
  - cleanup power management by dropping unnecessary call.
* ltr501
  - Use the claim_direct_mode helpers. Fix a race condition along the way.
* max1027
  - Fix a dubious x | !y sparse warning.
  - Use the new iio_trigger_validate_own_device helper.
* max440000
  - Clean up some sparse warnings about endian types.
* mcp4725
  - Use the regulator framework to establish the reference voltage rather than
    getting it from platform data.
  - Tidy up a comment typo.
  - Fix a wrong PTR_ERR query (wrong regulator).
* mma7660
  - Take a mma7660_nscale static.
* mma8452
  - Use the new iio_trigger_validate_own_device helper.
  - Use claim_direct_mode helpers - fix a race condition along the way.
* mpl3115
  - Use claim_direct_mode helpers - fix a race condition along the way.
* ms65611
  - Tidy up regulator error handling and clean out a static warning in the mix.
* sca3000
  - Avoid a potential unitialized variable if a hardware read returns a value
  that isn't actually supported (mostly warning supression).
  - Fix a use before setting of the indio_dev->buffer pointer. Broken for
  a very long time so not going to rush this into stable.
  - Merge buffer file with core file.  We used to always split these.
  Sometimes it's just not worth the hassle. In this case the device's main
  feature is it's hardware fifos so unlikely anyone would want to run it
  without.
  - Drop the sca3000_register_ring_funcs function as it's a pointless wrapper
  once we have only one file.
  - Fix cleaning of flag + setting of size of scan. Without this you can't
  start the buffer twice and expect sensible (or any) results.  Again,
  broken for a long time so not heading for stable.
  - Drop the custom watershed setting ABI - for now we'll just support one
  value.
  - Move to a hybrid hard / soft buffer design (how we've been doing it
  for similar devices for a while now!)
  - Cleanup some unusued variables.
  - Use a fake channel to support core handling of freefall event registration.
  - Cleanup the register defines.
  - Fix an off by one error in axis due to IIO_NO_MOD taking up the 0 value.
  Been broken since first admission of IIO to the staging tree.
  - Add readback of the 3db low pass filter frequency and later writing
    allowing droppign of custom measurement mode attributes as they can
    be represented by the filter choices that is their main characteristic.
  - Drop non standard revision attr and replace with dev_info on probe.
  - Avoid a race in probe.
  - Various formatting fixes.
  - Kernel-docify docs that were very nearly in the write format.
* tsl2583
  - Constify attribute_group structure.
* zpa2326
  - Drop a redundant DEBUG ifdef.

Cleanups (Tools)
* iio_generic_buffer
  - Fix the ? arguement. Previously it sort of worked as you got the help
    message as a result of it not recognising the arguement.
2016-10-24 11:34:22 +02:00
Paweł Jarosz
c2eb848ffa devicetree: Add vendor prefix for Rikomagic
Add Rikomagic to vendor-prefixes.txt

Signed-off-by: Paweł Jarosz <paweljarosz3691@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-10-21 17:48:01 +02:00
Romain Perier
e4d6013eaf dt-bindings: Add vendor prefix for INSIDE Secure
This commits adds a vendor for the company INSIDE Secure.
See https://www.insidesecure.com, for more details.

Signed-off-by: Romain Perier <romain.perier@free-electrons.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-10-21 10:26:17 +08:00