The current comment states that we check if the 64-bit kernel mapping
overlaps with the last 4K of the address space that is reserved to
error values in create_kernel_page_table, which is not the case since it
is done in setup_vm. But anyway, remove the reference to any function
and simply note that in 64-bit kernel, the check should be done as soon
as the kernel mapping base address is known.
Fixes: db6b84a368 ("riscv: Make sure the kernel mapping does not overlap with IS_ERR_VALUE")
Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
The usage of CONFIG_PHYS_RAM_BASE for all kernel types was a mistake:
this value is implementation-specific and this breaks the genericity of
the RISC-V kernel.
Fix this by introducing a new variable phys_ram_base that holds this
value at runtime and use it in the kernel physical address conversion
macro. Since this value is used only for XIP kernels, evaluate it only if
CONFIG_XIP_KERNEL is set which in addition optimizes this macro for
standard kernels at compile-time.
Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
Tested-by: Emil Renner Berthing <kernel@esmil.dk>
Reviewed-by: Jisheng Zhang <jszhang@kernel.org>
Fixes: 44c9225729 ("RISC-V: enable XIP")
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
The check that is done in setup_bootmem currently only works for 32-bit
kernel since the kernel mapping has been moved outside of the linear
mapping for 64-bit kernel. So make sure that for 64-bit kernel, the kernel
mapping does not overlap with the last 4K of the addressable memory.
Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
Fixes: 2bfc6cd81b ("riscv: Move kernel mapping outside of linear mapping")
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
For 64-bit kernel, the end of the address space is occupied by the
kernel mapping and currently, the functions to populate the kernel page
tables (i.e. create_p*d_mapping) do not override existing mapping so we
must make sure the linear mapping does not map memory in the kernel mapping
by clipping the memory above the memory limit.
Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
Fixes: c9811e379b ("riscv: Add mem kernel parameter support")
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
As described in Documentation/riscv/vm-layout.rst, the end of the
virtual address space for 64-bit kernel is occupied by the modules/BPF/
kernel mappings so this actually reduces the amount of memory we are able
to map and then use in the linear mapping. So make sure this limit is
correctly set.
Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
Fixes: 2bfc6cd81b ("riscv: Move kernel mapping outside of linear mapping")
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
This contains a single fix for 32-bit boot. It happens this was already
fixed by c9811e379b ("riscv: Add mem kernel parameter support"), but
the bug existed before that feature addition so I've applied the patch
earlier and then merged it in (which results in a conflict, which is
fixed via not changing the resulting tree).
* riscv/riscv-fix-32bit:
riscv: Fix 32-bit RISC-V boot failure
Commit dd2d082b57 ("riscv: Cleanup setup_bootmem()") adjusted
the calling sequence in setup_bootmem(), which invalidates the fix
commit de043da0b9 ("RISC-V: Fix usage of memblock_enforce_memory_limit")
did for 32-bit RISC-V unfortunately.
So now 32-bit RISC-V does not boot again when testing booting kernel
on QEMU 'virt' with '-m 2G', which was exactly what the original
commit de043da0b9 ("RISC-V: Fix usage of memblock_enforce_memory_limit")
tried to fix.
Fixes: dd2d082b57 ("riscv: Cleanup setup_bootmem()")
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
In addition to We have a handful of new features for 5.14:
* Support for transparent huge pages.
* Support for generic PCI resources mapping.
* Support for the mem= kernel parameter.
* Support for KFENCE.
* A handful of fixes to avoid W+X mappings in the kernel.
* Support for VMAP_STACK based overflow detection.
* An optimized copy_{to,from}_user.
-----BEGIN PGP SIGNATURE-----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=uB+H
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-5.14-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
"We have a handful of new features for 5.14:
- Support for transparent huge pages.
- Support for generic PCI resources mapping.
- Support for the mem= kernel parameter.
- Support for KFENCE.
- A handful of fixes to avoid W+X mappings in the kernel.
- Support for VMAP_STACK based overflow detection.
- An optimized copy_{to,from}_user"
* tag 'riscv-for-linus-5.14-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (37 commits)
riscv: xip: Fix duplicate included asm/pgtable.h
riscv: Fix PTDUMP output now BPF region moved back to module region
riscv: __asm_copy_to-from_user: Optimize unaligned memory access and pipeline stall
riscv: add VMAP_STACK overflow detection
riscv: ptrace: add argn syntax
riscv: mm: fix build errors caused by mk_pmd()
riscv: Introduce structure that group all variables regarding kernel mapping
riscv: Map the kernel with correct permissions the first time
riscv: Introduce set_kernel_memory helper
riscv: Enable KFENCE for riscv64
RISC-V: Use asm-generic for {in,out}{bwlq}
riscv: add ASID-based tlbflushing methods
riscv: pass the mm_struct to __sbi_tlb_flush_range
riscv: Add mem kernel parameter support
riscv: Simplify xip and !xip kernel address conversion macros
riscv: Remove CONFIG_PHYS_RAM_BASE_FIXED
riscv: Only initialize swiotlb when necessary
riscv: fix typo in init.c
riscv: Cleanup unused functions
riscv: mm: Use better bitmap_zalloc()
...
BPF region was moved back to the region below the kernel at the end of
the module region by 3a02764c37 ("riscv: Ensure BPF_JIT_REGION_START
aligned with PMD size"), so reflect this change in kernel page table
output.
Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
Reviewed-by: Jisheng Zhang <jszhang@kernel.org>
Fixes: 3a02764c37 ("riscv: Ensure BPF_JIT_REGION_START aligned with PMD size")
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
We have a lot of variables that are used to hold kernel mapping addresses,
offsets between physical and virtual mappings and some others used for XIP
kernels: they are all defined at different places in mm/init.c, so group
them into a single structure with, for some of them, more explicit and concise
names.
Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
This contains both the short-term fix for the W+X boot mappings and the
larger cleanup.
* riscv-wx-mappings:
riscv: Map the kernel with correct permissions the first time
riscv: Introduce set_kernel_memory helper
riscv: Simplify xip and !xip kernel address conversion macros
riscv: Remove CONFIG_PHYS_RAM_BASE_FIXED
riscv: mm: Fix W+X mappings at boot
For 64-bit kernels, we map all the kernel with write and execute
permissions and afterwards remove writability from text and executability
from data.
For 32-bit kernels, the kernel mapping resides in the linear mapping, so we
map all the linear mapping as writable and executable and afterwards we
remove those properties for unused memory and kernel mapping as
described above.
Change this behavior to directly map the kernel with correct permissions
and avoid going through the whole mapping to fix the permissions.
At the same time, this fixes an issue introduced by commit 2bfc6cd81b
("riscv: Move kernel mapping outside of linear mapping") as reported
here https://github.com/starfive-tech/linux/issues/17.
Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Add architecture specific implementation details for KFENCE and enable
KFENCE for the riscv64 architecture. In particular, this implements the
required interface in <asm/kfence.h>.
KFENCE requires that attributes for pages from its memory pool can
individually be set. Therefore, force the kfence pool to be mapped at
page granularity.
Testing this patch using the testcases in kfence_test.c and all passed.
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Acked-by: Marco Elver <elver@google.com>
Reviewed-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Implement optimized version of the tlb flushing routines for systems
using ASIDs. These are behind the use_asid_allocator static branch to
not affect existing systems not using ASIDs.
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
[hch: rebased on top of previous cleanups, use the same algorithm as
the non-ASID based code for local vs global flushes, keep functions
as local as possible]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Guo Ren <guoren@kernel.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Move the call mm_cpumask from the callers into __sbi_tlb_flush_range to
reduce a bit of duplicate code and prepare for future changes.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Guo Ren <guoren@kernel.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Andreas reported commit fc8504765e ("riscv: bpf: Avoid breaking W^X")
breaks booting with one kind of defconfig, I reproduced a kernel panic
with the defconfig:
[ 0.138553] Unable to handle kernel paging request at virtual address ffffffff81201220
[ 0.139159] Oops [#1]
[ 0.139303] Modules linked in:
[ 0.139601] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.13.0-rc5-default+ #1
[ 0.139934] Hardware name: riscv-virtio,qemu (DT)
[ 0.140193] epc : __memset+0xc4/0xfc
[ 0.140416] ra : skb_flow_dissector_init+0x1e/0x82
[ 0.140609] epc : ffffffff8029806c ra : ffffffff8033be78 sp : ffffffe001647da0
[ 0.140878] gp : ffffffff81134b08 tp : ffffffe001654380 t0 : ffffffff81201158
[ 0.141156] t1 : 0000000000000002 t2 : 0000000000000154 s0 : ffffffe001647dd0
[ 0.141424] s1 : ffffffff80a43250 a0 : ffffffff81201220 a1 : 0000000000000000
[ 0.141654] a2 : 000000000000003c a3 : ffffffff81201258 a4 : 0000000000000064
[ 0.141893] a5 : ffffffff8029806c a6 : 0000000000000040 a7 : ffffffffffffffff
[ 0.142126] s2 : ffffffff81201220 s3 : 0000000000000009 s4 : ffffffff81135088
[ 0.142353] s5 : ffffffff81135038 s6 : ffffffff8080ce80 s7 : ffffffff80800438
[ 0.142584] s8 : ffffffff80bc6578 s9 : 0000000000000008 s10: ffffffff806000ac
[ 0.142810] s11: 0000000000000000 t3 : fffffffffffffffc t4 : 0000000000000000
[ 0.143042] t5 : 0000000000000155 t6 : 00000000000003ff
[ 0.143220] status: 0000000000000120 badaddr: ffffffff81201220 cause: 000000000000000f
[ 0.143560] [<ffffffff8029806c>] __memset+0xc4/0xfc
[ 0.143859] [<ffffffff8061e984>] init_default_flow_dissectors+0x22/0x60
[ 0.144092] [<ffffffff800010fc>] do_one_initcall+0x3e/0x168
[ 0.144278] [<ffffffff80600df0>] kernel_init_freeable+0x1c8/0x224
[ 0.144479] [<ffffffff804868a8>] kernel_init+0x12/0x110
[ 0.144658] [<ffffffff800022de>] ret_from_exception+0x0/0xc
[ 0.145124] ---[ end trace f1e9643daa46d591 ]---
After some investigation, I think I found the root cause: commit
2bfc6cd81b ("move kernel mapping outside of linear mapping") moves
BPF JIT region after the kernel:
| #define BPF_JIT_REGION_START PFN_ALIGN((unsigned long)&_end)
The &_end is unlikely aligned with PMD size, so the front bpf jit
region sits with part of kernel .data section in one PMD size mapping.
But kernel is mapped in PMD SIZE, when bpf_jit_binary_lock_ro() is
called to make the first bpf jit prog ROX, we will make part of kernel
.data section RO too, so when we write to, for example memset the
.data section, MMU will trigger a store page fault.
To fix the issue, we need to ensure the BPF JIT region is PMD size
aligned. This patch acchieve this goal by restoring the BPF JIT region
to original position, I.E the 128MB before kernel .text section. The
modification to kasan_init.c is inspired by Alexandre.
Fixes: fc8504765e ("riscv: bpf: Avoid breaking W^X")
Reported-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
commit 2bfc6cd81b ("riscv: Move kernel mapping outside of linear
mapping") makes use of MODULES_VADDR to populate kernel, BPF, modules
mapping. Currently, MODULES_VADDR is defined as below for RV64:
| #define MODULES_VADDR (PFN_ALIGN((unsigned long)&_end) - SZ_2G)
But kasan_init() has two local variables which are also named as _start,
_end, so MODULES_VADDR is evaluated with the local variable _end
rather than the global "_end" as we expected. Fix this issue by
renaming the two local variables.
Fixes: 2bfc6cd81b ("riscv: Move kernel mapping outside of linear mapping")
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
The memblock_enforce_memory_limit() could change the memblock
range, so move the dram_end assignment after it in bootmem_init(),
then support mem= cmdline.
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
The SWIOTLB buffer is not needed unless the physical address space
is beyond the limit of dma, only initialize swiotlb when swiotlb_force
is true or not all system memory is DMA-able.
Also move the swiotlb_init() into mem_init().
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Use better bitmap_zalloc() to allocate bitmap.
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Consolidate the following items in init.c
Staticize global vars as much as possible;
Add __initdata mark if the global var isn't needed after init
Add __init mark if the func isn't needed after init
Add __ro_after_init if the global var is read only after init
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
These functions are not needed after booting, so mark them as __init
to move them to the __init section.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Directly passing the cpu to flush_icache_deferred() rather than calling
smp_processor_id() again.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
[Palmer: drop the QEMU performance numbers, and update the comment]
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
The _sdata/_edata is already in sections.h, drop redundant
declaration.
Also move _xiprom/_exiprom declarations at the beginning of
the file, cleanup one CONFIG_XIP_KERNEL.
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
The empty_zero_page sits at .bss..page_aligned section, so will be
cleared to zero during clearing bss, we don't need to clear it again.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Bring Transparent HugePage support to riscv. A
transparent huge page is always represented as a pmd.
Signed-off-by: Nanyong Sun <sunnanyong@huawei.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Add a parameter: stride for __sbi_tlb_flush_range(),
represent the page stride between the address of start and end.
Normally, the stride is PAGE_SIZE, and when flush huge page
address, the stride can be the huge page size such as:PMD_SIZE,
then it only need to flush one tlb entry if the address range
within PMD_SIZE.
Signed-off-by: Nanyong Sun <sunnanyong@huawei.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
The various uses of protect_kernel_linear_mapping_text_rodata() are
not consistent:
- Its definition depends on "64BIT && !XIP_KERNEL",
- Its forward declaration depends on MMU,
- Its single caller depends on "STRICT_KERNEL_RWX && 64BIT && MMU &&
!XIP_KERNEL".
Fix this by settling on the dependencies of the caller, which can be
simplified as STRICT_KERNEL_RWX depends on "MMU && !XIP_KERNEL".
Provide a dummy definition, as the caller is protected by
"IS_ENABLED(CONFIG_STRICT_KERNEL_RWX)" instead of "#ifdef
CONFIG_STRICT_KERNEL_RWX".
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Alexandre Ghiti <alex@ghiti.fr>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
When the kernel mapping was moved outside of the linear mapping, the
kernel memory reservation was increased, to take into account mapping
granularity. However, this is done unconditionally, regardless of
whether the kernel memory is mapped read-only or not.
If this extension is not needed, up to 2 MiB may be lost, which has a
big impact on e.g. Canaan K210 (64-bit nommu) platforms with only 8 MiB
of RAM.
Reclaim the lost memory by only extending the reserved region when
needed, i.e. depending on a simplified version of the conditional logic
around the call to protect_kernel_linear_mapping_text_rodata().
Fixes: 2bfc6cd81b ("riscv: Move kernel mapping outside of linear mapping")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Alexandre Ghiti <alex@ghiti.fr>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
* Support for the memtest= kernel command-line argument.
* Support for building the kernel with FORTIFY_SOURCE.
* Support for generic clockevent broadcasts.
* Support for the buildtar build target.
* Some build system cleanups to pass more LLVM-friendly arguments.
* Support for kprobes.
* A rearranged kernel memory map, the first part of supporting sv48
systems.
* Improvements to kexec, along with support for kdump and crash kernels.
* An alternatives-based errata framework, along with support for
handling a pair of errata that manifest on some SiFive designs
(including the HiFive Unmatched).
* Support for XIP.
* A device tree for the Microchip PolarFire ICICLE SoC and associated
dev board.
Along with a bunch of cleanups. There are already a handful of fixes
on the list so there will likely be a part 2.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCgAxFiEEKzw3R0RoQ7JKlDp6LhMZ81+7GIkFAmCS4lITHHBhbG1lckBk
YWJiZWx0LmNvbQAKCRAuExnzX7sYieZqEACSihfcOgZ/oyGWN3chca917/yCWimM
DOu37Zlh81TNPgzzJwbT44IY5sg/lSecwktxs665TChiJjr3JlM4jmz+u64KOTA8
mTWhqZNr5zT9kFj/m3x0V9yYOVr9g43QRmIlc14d+8JaQDw0N8WeH/yK85/CXDSS
X5gQK/e9q/yPf/NPyPuPm67jDsFnJERINWaAHI8lhA5fvFyy/xRLmSkuexchysss
XOGfyxxX590jGLK1vD+5wccX7ZwfwU4jriTaxyah/VBl8QUur/xSPVyspHIdWiMG
jrNXI1dg6oI861BdjryUpZI0iYJaRe5FRWUx7uTIqHfIyL/MnvYI7USVYOOPb72M
yZgN903R++5NeUUVTzfXwaigTwfXAPB6USFqZpEfRAf204pgNybmznJWThAVBdYG
rUixp7GsEMU3aAT2tE/iHR33JQxQfnZq8Tg43/4gB7MoACrzQrYrGcPnj9xssMyV
F1hnao3dr+5Xjo3MwfkW9JvLPwvDuE3mdrdj+a0XZ45gbTJeuBhYxo3VOsFeijhQ
gf/VYuoNn5iae9fiMzx5rlmFT9NJDYKDhla+BpAel84/6nRryyfCZCaE5FvDynOO
CNQynaeJMIMEygPBYR9FVVCwm+EtVsz3NVFKEuo5ilQpgX8ipctxiqy2+moZALLN
OWlEH6BKEgXqkw==
=PsA8
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-5.13-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
- Support for the memtest= kernel command-line argument.
- Support for building the kernel with FORTIFY_SOURCE.
- Support for generic clockevent broadcasts.
- Support for the buildtar build target.
- Some build system cleanups to pass more LLVM-friendly arguments.
- Support for kprobes.
- A rearranged kernel memory map, the first part of supporting sv48
systems.
- Improvements to kexec, along with support for kdump and crash
kernels.
- An alternatives-based errata framework, along with support for
handling a pair of errata that manifest on some SiFive designs
(including the HiFive Unmatched).
- Support for XIP.
- A device tree for the Microchip PolarFire ICICLE SoC and associated
dev board.
... along with a bunch of cleanups. There are already a handful of fixes
on the list so there will likely be a part 2.
* tag 'riscv-for-linus-5.13-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (45 commits)
RISC-V: Always define XIP_FIXUP
riscv: Remove 32b kernel mapping from page table dump
riscv: Fix 32b kernel build with CONFIG_DEBUG_VIRTUAL=y
RISC-V: Fix error code returned by riscv_hartid_to_cpuid()
RISC-V: Enable Microchip PolarFire ICICLE SoC
RISC-V: Initial DTS for Microchip ICICLE board
dt-bindings: riscv: microchip: Add YAML documentation for the PolarFire SoC
RISC-V: Add Microchip PolarFire SoC kconfig option
RISC-V: enable XIP
RISC-V: Add crash kernel support
RISC-V: Add kdump support
RISC-V: Improve init_resources()
RISC-V: Add kexec support
RISC-V: Add EM_RISCV to kexec UAPI header
riscv: vdso: fix and clean-up Makefile
riscv/mm: Use BUG_ON instead of if condition followed by BUG.
riscv/kprobe: fix kernel panic when invoking sys_read traced by kprobe
riscv: Set ARCH_HAS_STRICT_MODULE_RWX if MMU
riscv: module: Create module allocations without exec permissions
riscv: bpf: Avoid breaking W^X
...
The 32b kernel mapping lies in the linear mapping, there is no point in
printing its address in page table dump, so remove this leftover that
comes from moving the kernel mapping outside the linear mapping for 64b
kernel.
Fixes: e9efb21fe352 ("riscv: Prepare ptdump for vm layout dynamic addresses")
Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
mem_init_print_info() is called in mem_init() on each architecture, and
pass NULL argument, so using void argument and move it into mm_init().
Link: https://lkml.kernel.org/r/20210317015210.33641-1-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com> [x86]
Reviewed-by: Christophe Leroy <christophe.leroy@c-s.fr> [powerpc]
Acked-by: David Hildenbrand <david@redhat.com>
Tested-by: Anatoly Pugachev <matorola@gmail.com> [sparc64]
Acked-by: Russell King <rmk+kernel@armlinux.org.uk> [arm]
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Guo Ren <guoren@kernel.org>
Cc: Yoshinori Sato <ysato@users.osdn.me>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: "Peter Zijlstra" <peterz@infradead.org>
Cc: Ingo Molnar <mingo@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Introduce XIP (eXecute In Place) support for RISC-V platforms.
It allows code to be executed directly from non-volatile storage
directly addressable by the CPU, such as QSPI NOR flash which can
be found on many RISC-V platforms. This makes way for significant
optimization of RAM footprint. The XIP kernel is not compressed
since it has to run directly from flash, so it will occupy more
space on the non-volatile storage. The physical flash address used
to link the kernel object files and for storing it has to be known
at compile time and is represented by a Kconfig option.
XIP on RISC-V will for the time being only work on MMU-enabled
kernels.
Signed-off-by: Vitaly Wool <vitaly.wool@konsulko.com>
[Alex: Rebase on top of "Move kernel mapping outside the linear mapping" ]
Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
[Palmer: disable XIP for allyesconfig]
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
This patch allows Linux to act as a crash kernel for use with
kdump. Userspace will let the crash kernel know about the
memory region it can use through linux,usable-memory property
on the /memory node (overriding its reg property), and about the
memory region where the elf core header of the previous kernel
is saved, through a reserved-memory node with a compatible string
of "linux,elfcorehdr". This approach is the least invasive and
re-uses functionality already present.
I tested this on riscv64 qemu and it works as expected, you
may test it by retrieving the dmesg of the previous kernel
through /proc/vmcore, using the vmcore-dmesg utility from
kexec-tools.
Signed-off-by: Nick Kossifidis <mick@ics.forth.gr>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
This patch adds support for kdump, the kernel will reserve a
region for the crash kernel and jump there on panic. In order
for userspace tools (kexec-tools) to prepare the crash kernel
kexec image, we also need to expose some information on
/proc/iomem for the memory regions used by the kernel and for
the region reserved for crash kernel. Note that on userspace
the device tree is used to determine the system's memory
layout so the "System RAM" on /proc/iomem is ignored.
I tested this on riscv64 qemu and works as expected, you may
test it by triggering a crash through /proc/sysrq_trigger:
echo c > /proc/sysrq_trigger
Signed-off-by: Nick Kossifidis <mick@ics.forth.gr>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
BUG_ON() uses unlikely in if(), which can be optimized at compile time.
Signed-off-by: zhouchuangao <zhouchuangao@vivo.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
All of these are never modified after init, so they can be
__ro_after_init.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
They are not needed after booting, so mark them as __init to move them
to the __init section.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
This is a preparatory patch for sv48 support that will introduce
dynamic PAGE_OFFSET.
Dynamic PAGE_OFFSET implies that all zones (vmalloc, vmemmap, fixaddr...)
whose addresses depend on PAGE_OFFSET become dynamic and can't be used
to statically initialize the array used by ptdump to identify the
different zones of the vm layout.
Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
This is a preparatory patch for relocatable kernel and sv48 support.
The kernel used to be linked at PAGE_OFFSET address therefore we could use
the linear mapping for the kernel mapping. But the relocated kernel base
address will be different from PAGE_OFFSET and since in the linear mapping,
two different virtual addresses cannot point to the same physical address,
the kernel mapping needs to lie outside the linear mapping so that we don't
have to copy it at the same physical offset.
The kernel mapping is moved to the last 2GB of the address space, BPF
is now always after the kernel and modules use the 2GB memory range right
before the kernel, so BPF and modules regions do not overlap. KASLR
implementation will simply have to move the kernel in the last 2GB range
and just take care of leaving enough space for BPF.
In addition, by moving the kernel to the end of the address space, both
sv39 and sv48 kernels will be exactly the same without needing to be
relocated at runtime.
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
[Palmer: Squash the STRICT_RWX fix, and a !MMU fix]
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
These two functions are used to implement the kprobes feature so they
can't be kprobed.
Fixes: c22b0bcb1d ("riscv: Add kprobes supported")
Cc: stable@vger.kernel.org
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Eliminate the following coccicheck warning:
./arch/riscv/mm/kasan_init.c:219:2-3: Unneeded semicolon
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
When KASAN vmalloc region is populated, there is no userspace process and
the page table in use is swapper_pg_dir, so there is no need to read
SATP. Then we can use the same scheme used by kasan_populate_p*d
functions to go through the page table, which harmonizes the code.
In addition, make use of set_pgd that goes through all unused page table
levels, contrary to p*d_populate functions, which makes this function work
whatever the number of page table levels.
Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Without this I get a missing prototype warning.
Reported-by: kernel test robot <lkp@intel.com>
Fixes: e178d670f2 ("riscv/kasan: add KASAN_VMALLOC support")
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Make sure that writes to kernel page table during KASAN vmalloc
initialization are made visible by adding a sfence.vma.
Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
Fixes: e178d670f2 ("riscv/kasan: add KASAN_VMALLOC support")
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
The riscv [rv32_]defconfig enabled CONFIG_MEMTEST,
but memtest feature is not supported in RISCV.
Add early_memtest() to support for memtest.
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
After the following patches,
commit de043da0b9 ("RISC-V: Fix usage of memblock_enforce_memory_limit")
commit 1bd14a66ee ("RISC-V: Remove any memblock representing unusable memory area")
commit b10d6bca87 ("arch, drivers: replace for_each_membock() with for_each_mem_range()")
some logic is useless, kill the mem_start/start/end and unneeded code.
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
