SRv6 End.DT6 is defined in the SRv6 Network Programming [1].
The Linux kernel already offers an implementation of the SRv6
End.DT6 behavior which permits IPv6 L3 VPNs over SRv6 networks. This
implementation is not particularly suitable in contexts where we need to
deploy IPv6 L3 VPNs among different tenants which share the same network
address schemes. The underlying problem lies in the fact that the
current version of DT6 (called legacy DT6 from now on) needs a complex
configuration to be applied on routers which requires ad-hoc routes and
routing policy rules to ensure the correct isolation of tenants.
Consequently, a new implementation of DT6 has been introduced with the
aim of simplifying the construction of IPv6 L3 VPN services in the
multi-tenant environment using SRv6 networks. To accomplish this task,
we reused the same VRF infrastructure and SRv6 core components already
exploited for implementing the SRv6 End.DT4 behavior.
Currently the two End.DT6 implementations coexist seamlessly and can be
used depending on the context and the user preferences. So, in order to
support both versions of DT6 a new attribute (vrftable) has been
introduced which allows us to differentiate the implementation of the
behavior to be used.
A SRv6 End.DT6 legacy behavior is still instantiated using a command
like the following one:
$ ip -6 route add 2001:db8::1 encap seg6local action End.DT6 table 100 dev eth0
While to instantiate the SRv6 End.DT6 in VRF mode, the command is still
pretty straight forward:
$ ip -6 route add 2001:db8::1 encap seg6local action End.DT6 vrftable 100 dev eth0.
Obviously as in the case of SRv6 End.DT4, the VRF strict_mode parameter
must be set (net.vrf.strict_mode=1) and the VRF associated with table
100 must exist.
Please note that the instances of SRv6 End.DT6 legacy and End.DT6 VRF
mode can coexist in the same system/configuration without problems.
[1] https://tools.ietf.org/html/draft-ietf-spring-srv6-network-programming
Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
SRv6 End.DT4 is defined in the SRv6 Network Programming [1].
The SRv6 End.DT4 is used to implement IPv4 L3VPN use-cases in
multi-tenants environments. It decapsulates the received packets and it
performs IPv4 routing lookup in the routing table of the tenant.
The SRv6 End.DT4 Linux implementation leverages a VRF device in order to
force the routing lookup into the associated routing table.
To make the End.DT4 work properly, it must be guaranteed that the routing
table used for routing lookup operations is bound to one and only one
VRF during the tunnel creation. Such constraint has to be enforced by
enabling the VRF strict_mode sysctl parameter, i.e:
$ sysctl -wq net.vrf.strict_mode=1.
At JANOG44, LINE corporation presented their multi-tenant DC architecture
using SRv6 [2]. In the slides, they reported that the Linux kernel is
missing the support of SRv6 End.DT4 behavior.
The SRv6 End.DT4 behavior can be instantiated using a command similar to
the following:
$ ip route add 2001:db8::1 encap seg6local action End.DT4 vrftable 100 dev eth0
We introduce the "vrftable" extension in iproute2 in a following patch.
[1] https://tools.ietf.org/html/draft-ietf-spring-srv6-network-programming
[2] https://speakerdeck.com/line_developers/line-data-center-networking-with-srv6
Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We introduce two callbacks used for customizing the creation/destruction of
a SRv6 behavior. Such callbacks are defined in the new struct
seg6_local_lwtunnel_ops and hereafter we provide a brief description of
them:
- build_state(...): used for calling the custom constructor of the
behavior during its initialization phase and after all the attributes
have been parsed successfully;
- destroy_state(...): used for calling the custom destructor of the
behavior before it is completely destroyed.
Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Before this patch, each SRv6 behavior specifies a set of required
attributes that must be provided by the userspace application when such
behavior is going to be instantiated. If at least one of the required
attributes is not provided, the creation of the behavior fails.
The SRv6 behavior framework lacks a way to manage optional attributes.
By definition, an optional attribute for a SRv6 behavior consists of an
attribute which may or may not be provided by the userspace. Therefore,
if an optional attribute is missing (and thus not supplied by the user)
the creation of the behavior goes ahead without any issue.
This patch explicitly differentiates the required attributes from the
optional attributes. In particular, each behavior can declare a set of
required attributes and a set of optional ones.
The semantic of the required attributes remains *totally* unaffected by
this patch. The introduction of the optional attributes does NOT impact
on the backward compatibility of the existing SRv6 behaviors.
It is essential to note that if an (optional or required) attribute is
supplied to a SRv6 behavior which does not expect it, the behavior
simply discards such attribute without generating any error or warning.
This operating mode remained unchanged both before and after the
introduction of the optional attributes extension.
The optional attributes are one of the key components used to implement
the SRv6 End.DT6 behavior based on the Virtual Routing and Forwarding
(VRF) framework. The optional attributes make possible the coexistence
of the already existing SRv6 End.DT6 implementation with the new SRv6
End.DT6 VRF-based implementation without breaking any backward
compatibility. Further details on the SRv6 End.DT6 behavior (VRF mode)
are reported in subsequent patches.
From the userspace point of view, the support for optional attributes DO
NOT require any changes to the userspace applications, i.e: iproute2
unless new attributes (required or optional) are needed.
Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Depending on the attribute (i.e.: SEG6_LOCAL_SRH, SEG6_LOCAL_TABLE, etc),
the parse() callback performs some validity checks on the provided input
and updates the tunnel state (slwt) with the result of the parsing
operation. However, an attribute may also need to reserve some additional
resources (i.e.: memory or setting up an eBPF program) in the parse()
callback to complete the parsing operation.
The parse() callbacks are invoked by the parse_nla_action() for each
attribute belonging to a specific behavior. Given a behavior with N
attributes, if the parsing of the i-th attribute fails, the
parse_nla_action() returns immediately with an error. Nonetheless, the
resources acquired during the parsing of the i-1 attributes are not freed
by the parse_nla_action().
Attributes which acquire resources must release them *in an explicit way*
in both the seg6_local_{build/destroy}_state(). However, adding a new
attribute of this type requires changes to
seg6_local_{build/destroy}_state() to release the resources correctly.
The seg6local infrastructure still lacks a simple and structured way to
release the resources acquired in the parse() operations.
We introduced a new callback in the struct seg6_action_param named
destroy(). This callback releases any resource which may have been acquired
in the parse() counterpart. Each attribute may or may not implement the
destroy() callback depending on whether it needs to free some acquired
resources.
The destroy() callback comes with several of advantages:
1) we can have many attributes as we want for a given behavior with no
need to explicitly free the taken resources;
2) As in case of the seg6_local_build_state(), the
seg6_local_destroy_state() does not need to handle the release of
resources directly. Indeed, it calls the destroy_attrs() function which
is in charge of calling the destroy() callback for every set attribute.
We do not need to patch seg6_local_{build/destroy}_state() anymore as
we add new attributes;
3) the code is more readable and better structured. Indeed, all the
information needed to handle a given attribute are contained in only
one place;
4) it facilitates the integration with new features introduced in further
patches.
Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Alexei Starovoitov says:
====================
pull-request: bpf-next 2020-12-03
The main changes are:
1) Support BTF in kernel modules, from Andrii.
2) Introduce preferred busy-polling, from Björn.
3) bpf_ima_inode_hash() and bpf_bprm_opts_set() helpers, from KP Singh.
4) Memcg-based memory accounting for bpf objects, from Roman.
5) Allow bpf_{s,g}etsockopt from cgroup bind{4,6} hooks, from Stanislav.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (118 commits)
selftests/bpf: Fix invalid use of strncat in test_sockmap
libbpf: Use memcpy instead of strncpy to please GCC
selftests/bpf: Add fentry/fexit/fmod_ret selftest for kernel module
selftests/bpf: Add tp_btf CO-RE reloc test for modules
libbpf: Support attachment of BPF tracing programs to kernel modules
libbpf: Factor out low-level BPF program loading helper
bpf: Allow to specify kernel module BTFs when attaching BPF programs
bpf: Remove hard-coded btf_vmlinux assumption from BPF verifier
selftests/bpf: Add CO-RE relocs selftest relying on kernel module BTF
selftests/bpf: Add support for marking sub-tests as skipped
selftests/bpf: Add bpf_testmod kernel module for testing
libbpf: Add kernel module BTF support for CO-RE relocations
libbpf: Refactor CO-RE relocs to not assume a single BTF object
libbpf: Add internal helper to load BTF data by FD
bpf: Keep module's btf_data_size intact after load
bpf: Fix bpf_put_raw_tracepoint()'s use of __module_address()
selftests/bpf: Add Userspace tests for TCP_WINDOW_CLAMP
bpf: Adds support for setting window clamp
samples/bpf: Fix spelling mistake "recieving" -> "receiving"
bpf: Fix cold build of test_progs-no_alu32
...
====================
Link: https://lore.kernel.org/r/20201204021936.85653-1-alexei.starovoitov@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The Multipath-TCP standard (RFC 8684) says that an MPTCP host should send
a TCP reset if the token in a MP_JOIN request is unknown.
At this time we don't do this, the 3whs completes and the 'new subflow'
is reset afterwards. There are two ways to allow MPTCP to send the
reset.
1. override 'send_synack' callback and emit the rst from there.
The drawback is that the request socket gets inserted into the
listeners queue just to get removed again right away.
2. Send the reset from the 'route_req' function instead.
This avoids the 'add&remove request socket', but route_req lacks the
skb that is required to send the TCP reset.
Instead of just adding the skb to that function for MPTCP sake alone,
Paolo suggested to merge init_req and route_req functions.
This saves one indirection from syn processing path and provides the skb
to the merged function at the same time.
'send reset on unknown mptcp join token' is added in next patch.
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
I have to now lock/unlock socket for the bind hook execution.
That shouldn't cause any overhead because the socket is unbound
and shouldn't receive any traffic.
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrey Ignatov <rdna@fb.com>
Link: https://lore.kernel.org/bpf/20201202172516.3483656-3-sdf@google.com
syzkaller managed to crash the kernel using an NBMA ip6gre interface. I
could reproduce it creating an NBMA ip6gre interface and forwarding
traffic to it:
skbuff: skb_under_panic: text:ffffffff8250e927 len:148 put:44 head:ffff8c03c7a33
------------[ cut here ]------------
kernel BUG at net/core/skbuff.c:109!
Call Trace:
skb_push+0x10/0x10
ip6gre_header+0x47/0x1b0
neigh_connected_output+0xae/0xf0
ip6gre tunnel provides its own header_ops->create, and sets it
conditionally when initializing the tunnel in NBMA mode. When
header_ops->create is used, dev->hard_header_len should reflect the
length of the header created. Otherwise, when not used,
dev->needed_headroom should be used.
Fixes: eb95f52fc7 ("net: ipv6_gre: Fix GRO to work on IPv6 over GRE tap")
Cc: Maria Pasechnik <mariap@mellanox.com>
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Link: https://lore.kernel.org/r/20201130161911.464106-1-atenart@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
For IPV6_2292PKTOPTIONS, do_ipv6_getsockopt() stores the user pointer
optval in the msg_control field of the msghdr.
Hence, sparse rightfully warns at ./net/ipv6/ipv6_sockglue.c:1151:33:
warning: incorrect type in assignment (different address spaces)
expected void *msg_control
got char [noderef] __user *optval
Since commit 1f466e1f15 ("net: cleanly handle kernel vs user buffers for
->msg_control"), user pointers shall be stored in the msg_control_user
field, and kernel pointers in the msg_control field. This allows to
propagate __user annotations nicely through this struct.
Store optval in msg_control_user to properly record and propagate the
memory space annotation of this pointer.
Note that msg_control_is_user is set to true, so the key invariant, i.e.,
use msg_control_user if and only if msg_control_is_user is true, holds.
The msghdr is further used in the six alternative put_cmsg() calls, with
msg_control_is_user being true, put_cmsg() picks msg_control_user
preserving the __user annotation and passes that properly to
copy_to_user().
No functional change. No change in object code.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20201127093421.21673-1-lukas.bulwahn@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Trivial conflict in CAN, keep the net-next + the byteswap wrapper.
Conflicts:
drivers/net/can/usb/gs_usb.c
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When a BPF program is used to select between a type of TCP congestion
control algorithm that uses either ECN or not there is a case where the
synack for the frame was coming up without the ECT0 bit set. A bit of
research found that this was due to the final socket being configured to
dctcp while the listener socket was staying in cubic.
To reproduce it all that is needed is to monitor TCP traffic while running
the sample bpf program "samples/bpf/tcp_cong_kern.c". What is observed,
assuming tcp_dctcp module is loaded or compiled in and the traffic matches
the rules in the sample file, is that for all frames with the exception of
the synack the ECT0 bit is set.
To address that it is necessary to make one additional call to
tcp_bpf_ca_needs_ecn using the request socket and then use the output of
that to set the ECT0 bit for the tos/tclass of the packet.
Fixes: 91b5b21c7c ("bpf: Add support for changing congestion control")
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Link: https://lore.kernel.org/r/160593039663.2604.1374502006916871573.stgit@localhost.localdomain
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When the TCP stack is in SYN flood mode, the server child socket is
created from the SYN cookie received in a TCP packet with the ACK flag
set.
The child socket is created when the server receives the first TCP
packet with a valid SYN cookie from the client. Usually, this packet
corresponds to the final step of the TCP 3-way handshake, the ACK
packet. But is also possible to receive a valid SYN cookie from the
first TCP data packet sent by the client, and thus create a child socket
from that SYN cookie.
Since a client socket is ready to send data as soon as it receives the
SYN+ACK packet from the server, the client can send the ACK packet (sent
by the TCP stack code), and the first data packet (sent by the userspace
program) almost at the same time, and thus the server will equally
receive the two TCP packets with valid SYN cookies almost at the same
instant.
When such event happens, the TCP stack code has a race condition that
occurs between the momement a lookup is done to the established
connections hashtable to check for the existence of a connection for the
same client, and the moment that the child socket is added to the
established connections hashtable. As a consequence, this race condition
can lead to a situation where we add two child sockets to the
established connections hashtable and deliver two sockets to the
userspace program to the same client.
This patch fixes the race condition by checking if an existing child
socket exists for the same client when we are adding the second child
socket to the established connections socket. If an existing child
socket exists, we drop the packet and discard the second child socket
to the same client.
Signed-off-by: Ricardo Dias <rdias@singlestore.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20201120111133.GA67501@rdias-suse-pc.lan
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
An issue was recently found where DCTCP SYN/ACK packets did not have the
ECT bit set in the L3 header. A bit of code review found that the recent
change referenced below had gone though and added a mask that prevented the
ECN bits from being populated in the L3 header.
This patch addresses that by rolling back the mask so that it is only
applied to the flags coming from the incoming TCP request instead of
applying it to the socket tos/tclass field. Doing this the ECT bits were
restored in the SYN/ACK packets in my testing.
One thing that is not addressed by this patch set is the fact that
tcp_reflect_tos appears to be incompatible with ECN based congestion
avoidance algorithms. At a minimum the feature should likely be documented
which it currently isn't.
Fixes: ac8f1710c1 ("tcp: reflect tos value received in SYN to the socket")
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Acked-by: Wei Wang <weiwan@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch adds an IPv6 routes encapsulation attribute
to the result of netlink RTM_GETROUTE requests
(i.e. ip route get 2001:db8::).
Signed-off-by: Oliver Herms <oliver.peter.herms@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20201118230651.GA8861@tws
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
IPV6=m
NF_DEFRAG_IPV6=y
ld: net/ipv6/netfilter/nf_conntrack_reasm.o: in function
`nf_ct_frag6_gather':
net/ipv6/netfilter/nf_conntrack_reasm.c:462: undefined reference to
`ipv6_frag_thdr_truncated'
Netfilter is depending on ipv6 symbol ipv6_frag_thdr_truncated. This
dependency is forcing IPV6=y.
Remove this dependency by moving ipv6_frag_thdr_truncated out of ipv6. This
is the same solution as used with a similar issues: Referring to
commit 70b095c843 ("ipv6: remove dependency of nf_defrag_ipv6 on ipv6
module")
Fixes: 9d9e937b1c ("ipv6/netfilter: Discard first fragment not including all headers")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Georg Kohmann <geokohma@cisco.com>
Acked-by: Pablo Neira Ayuso <pablo@netfilter.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Link: https://lore.kernel.org/r/20201119095833.8409-1-geokohma@cisco.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Link: https://lore.kernel.org/r/1605581105-35295-1-git-send-email-zhangchangzhong@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Packets are processed even though the first fragment don't include all
headers through the upper layer header. This breaks TAHI IPv6 Core
Conformance Test v6LC.1.3.6.
Referring to RFC8200 SECTION 4.5: "If the first fragment does not include
all headers through an Upper-Layer header, then that fragment should be
discarded and an ICMP Parameter Problem, Code 3, message should be sent to
the source of the fragment, with the Pointer field set to zero."
The fragment needs to be validated the same way it is done in
commit 2efdaaaf88 ("IPv6: reply ICMP error if the first fragment don't
include all headers") for ipv6. Wrap the validation into a common function,
ipv6_frag_thdr_truncated() to check for truncation in the upper layer
header. This validation does not fullfill all aspects of RFC 8200,
section 4.5, but is at the moment sufficient to pass mentioned TAHI test.
In netfilter, utilize the fragment offset returned by find_prev_fhdr() to
let ipv6_frag_thdr_truncated() start it's traverse from the fragment
header.
Return 0 to drop the fragment in the netfilter. This is the same behaviour
as used on other protocol errors in this function, e.g. when
nf_ct_frag6_queue() returns -EPROTO. The Fragment will later be picked up
by ipv6_frag_rcv() in reassembly.c. ipv6_frag_rcv() will then send an
appropriate ICMP Parameter Problem message back to the source.
References commit 2efdaaaf88 ("IPv6: reply ICMP error if the first
fragment don't include all headers")
Signed-off-by: Georg Kohmann <geokohma@cisco.com>
Acked-by: Pablo Neira Ayuso <pablo@netfilter.org>
Link: https://lore.kernel.org/r/20201111115025.28879-1-geokohma@cisco.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit bdb7cc643f ("ipv6: Count interface receive statistics on the
ingress netdev") removed all callees for ipv6_skb_idev(). Hence, since
then, ipv6_skb_idev() is unused and make CC=clang W=1 warns:
net/ipv6/exthdrs.c:909:33:
warning: unused function 'ipv6_skb_idev' [-Wunused-function]
So, remove this unused function and a -Wunused-function warning.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Link: https://lore.kernel.org/r/20201113135012.32499-1-lukas.bulwahn@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
genlmsg_cancel() needs to be called in the error path of
inet6_fill_ifmcaddr and inet6_fill_ifacaddr to cancel
the message.
Fixes: 6ecf4c37eb ("ipv6: enable IFA_TARGET_NETNSID for RTM_GETADDR")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Link: https://lore.kernel.org/r/20201112080950.1476302-1-zhangqilong3@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 58956317c8 ("neighbor: Improve garbage collection")
guarantees neighbour table entries a five-second lifetime. Processes
which make heavy use of multicast can fill the neighour table with
multicast addresses in five seconds. At that point, neighbour entries
can't be GC-ed because they aren't five seconds old yet, the kernel
log starts to fill up with "neighbor table overflow!" messages, and
sends start to fail.
This patch allows multicast addresses to be thrown out before they've
lived out their five seconds. This makes room for non-multicast
addresses and makes messages to all addresses more reliable in these
circumstances.
Fixes: 58956317c8 ("neighbor: Improve garbage collection")
Signed-off-by: Jeff Dike <jdike@akamai.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20201113015815.31397-1-jdike@akamai.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
udp{4,6}_lib_lookup_skb() use ip{,v6}_hdr() to get IP header of the
packet. While it's probably OK for non-frag0 paths, this helpers
will also point to junk on Fast/frag0 GRO when all headers are
located in frags. As a result, sk/skb lookup may fail or give wrong
results. To support both GRO modes, skb_gro_network_header() might
be used. To not modify original functions, add private versions of
udp{4,6}_lib_lookup_skb() only to perform correct sk lookups on GRO.
Present since the introduction of "application-level" UDP GRO
in 4.7-rc1.
Misc: replace totally unneeded ternaries with plain ifs.
Fixes: a6024562ff ("udp: Add GRO functions to UDP socket")
Suggested-by: Willem de Bruijn <willemb@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: Alexander Lobakin <alobakin@pm.me>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The skb is needed only to fetch the keys for the lookup.
Both functions are used from GRO stack, we do not want
accidental modification of the skb.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Alexander Lobakin <alobakin@pm.me>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When net.ipv4.tcp_syncookies=1 and syn flood is happened,
cookie_v4_check or cookie_v6_check tries to redo what
tcp_v4_send_synack or tcp_v6_send_synack did,
rsk_window_clamp will be changed if SOCK_RCVBUF is set,
which will make rcv_wscale is different, the client
still operates with initial window scale and can overshot
granted window, the client use the initial scale but local
server use new scale to advertise window value, and session
work abnormally.
Fixes: e88c64f0a4 ("tcp: allow effective reduction of TCP's rcv-buffer via setsockopt")
Signed-off-by: Mao Wenan <wenan.mao@linux.alibaba.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/1604967391-123737-1-git-send-email-wenan.mao@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Replace ip_tunnel_get_stats64() with the new identical core function
dev_get_tstats64().
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Replace ip_tunnel_get_stats64() with the new identical core function
dev_get_tstats64().
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Switch ip6_tunnel to the standard statistics pattern:
- use dev->stats for the less frequently accessed counters
- use dev->tstats for the frequently accessed counters
An additional benefit is that we now have 64bit statistics also on
32bit systems.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When udp_memory_allocated is at the limit, __udp_enqueue_schedule_skb
will return a -ENOBUFS, and skb will be dropped in __udp_queue_rcv_skb
without any counters being done. It's hard to find out what happened
once this happen.
So we introduce a UDP_MIB_MEMERRORS to do this job. Well, this change
looks friendly to the existing users, such as netstat:
$ netstat -u -s
Udp:
0 packets received
639 packets to unknown port received.
158689 packet receive errors
180022 packets sent
RcvbufErrors: 20930
MemErrors: 137759
UdpLite:
IpExt:
InOctets: 257426235
OutOctets: 257460598
InNoECTPkts: 181177
v2:
- Fix some alignment problems
Signed-off-by: Menglong Dong <dong.menglong@zte.com.cn>
Link: https://lore.kernel.org/r/1604627354-43207-1-git-send-email-dong.menglong@zte.com.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Due to the legacy usage of hard_header_len for SIT tunnels while
already using infrastructure from net/ipv4/ip_tunnel.c the
calculation of the path MTU in tnl_update_pmtu is incorrect.
This leads to unnecessary creation of MTU exceptions for any
flow going over a SIT tunnel.
As SIT tunnels do not have a header themsevles other than their
transport (L3, L2) headers we're leaving hard_header_len set to zero
as tnl_update_pmtu is already taking care of the transport headers
sizes.
This will also help avoiding unnecessary IPv6 GC runs and spinlock
contention seen when using SIT tunnels and for more than
net.ipv6.route.gc_thresh flows.
Fixes: c544193214 ("GRE: Refactor GRE tunneling code.")
Signed-off-by: Oliver Herms <oliver.peter.herms@gmail.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20201103104133.GA1573211@tws
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Remove in-kernel route notifications when the configuration of their
nexthop changes.
These notifications are unnecessary because the route still uses the
same nexthop ID. A separate notification for the nexthop change itself
is now sent in the nexthop notification chain.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pablo Neira Ayuso says:
====================
Netfilter updates for net-next
1) Move existing bridge packet reject infra to nf_reject_{ipv4,ipv6}.c
from Jose M. Guisado.
2) Consolidate nft_reject_inet initialization and dump, also from Jose.
3) Add the netdev reject action, from Jose.
4) Allow to combine the exist flag and the destroy command in ipset,
from Joszef Kadlecsik.
5) Expose bucket size parameter for hashtables, also from Jozsef.
6) Expose the init value for reproducible ipset listings, from Jozsef.
7) Use __printf attribute in nft_request_module, from Andrew Lunn.
8) Allow to use reject from the inet ingress chain.
* git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-next:
netfilter: nft_reject_inet: allow to use reject from inet ingress
netfilter: nftables: Add __printf() attribute
netfilter: ipset: Expose the initval hash parameter to userspace
netfilter: ipset: Add bucketsize parameter to all hash types
netfilter: ipset: Support the -exist flag with the destroy command
netfilter: nft_reject: add reject verdict support for netdev
netfilter: nft_reject: unify reject init and dump into nft_reject
netfilter: nf_reject: add reject skbuff creation helpers
====================
Link: https://lore.kernel.org/r/20201104141149.30082-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Steffen Klassert says:
====================
1) Fix packet receiving of standard IP tunnels when the xfrm_interface
module is installed. From Xin Long.
2) Fix a race condition between spi allocating and hash list
resizing. From zhuoliang zhang.
====================
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
net/ipv6/addrconf.c:2005: warning: Function parameter or member 'dev' not described in 'ipv6_dev_find'
net/ipv6/ip6_vti.c:138: warning: Function parameter or member 'ip6n' not described in 'vti6_tnl_bucket'
net/ipv6/ip6_tunnel.c:218: warning: Function parameter or member 'ip6n' not described in 'ip6_tnl_bucket'
net/ipv6/ip6_tunnel.c:238: warning: Function parameter or member 'ip6n' not described in 'ip6_tnl_link'
net/ipv6/ip6_tunnel.c:254: warning: Function parameter or member 'ip6n' not described in 'ip6_tnl_unlink'
net/ipv6/ip6_tunnel.c:427: warning: Function parameter or member 'raw' not described in 'ip6_tnl_parse_tlv_enc_lim'
net/ipv6/ip6_tunnel.c:499: warning: Function parameter or member 'skb' not described in 'ip6_tnl_err'
net/ipv6/ip6_tunnel.c:499: warning: Function parameter or member 'ipproto' not described in 'ip6_tnl_err'
net/ipv6/ip6_tunnel.c:499: warning: Function parameter or member 'opt' not described in 'ip6_tnl_err'
net/ipv6/ip6_tunnel.c:499: warning: Function parameter or member 'type' not described in 'ip6_tnl_err'
net/ipv6/ip6_tunnel.c:499: warning: Function parameter or member 'code' not described in 'ip6_tnl_err'
net/ipv6/ip6_tunnel.c:499: warning: Function parameter or member 'msg' not described in 'ip6_tnl_err'
net/ipv6/ip6_tunnel.c:499: warning: Function parameter or member 'info' not described in 'ip6_tnl_err'
net/ipv6/ip6_tunnel.c:499: warning: Function parameter or member 'offset' not described in 'ip6_tnl_err'
ip6_tnl_err() is an internal function, so remove the kerneldoc. For
the others, add the missing parameters.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20201031183044.1082193-1-andrew@lunn.ch
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Enhance validation to support for reject from inet ingress chains.
Note that, reject from inet ingress and netdev ingress differ.
Reject packets from inet ingress are sent through ip_local_out() since
inet reject emulates the IP layer receive path. So the reject packet
follows to classic IP output and postrouting paths.
The reject action from netdev ingress assumes the packet not yet entered
the IP layer, so the reject packet is sent through dev_queue_xmit().
Therefore, reject packets from netdev ingress do not follow the classic
IP output and postrouting paths.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Incorrect netlink report logic in flowtable and genID.
2) Add a selftest to check that wireguard passes the right sk
to ip_route_me_harder, from Jason A. Donenfeld.
3) Pass the actual sk to ip_route_me_harder(), also from Jason.
4) Missing expression validation of updates via nft --check.
5) Update byte and packet counters regardless of whether they
match, from Stefano Brivio.
====================
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Based on RFC 8200, Section 4.5 Fragment Header:
- If the first fragment does not include all headers through an
Upper-Layer header, then that fragment should be discarded and
an ICMP Parameter Problem, Code 3, message should be sent to
the source of the fragment, with the Pointer field set to zero.
Checking each packet header in IPv6 fast path will have performance impact,
so I put the checking in ipv6_frag_rcv().
As the packet may be any kind of L4 protocol, I only checked some common
protocols' header length and handle others by (offset + 1) > skb->len.
Also use !(frag_off & htons(IP6_OFFSET)) to catch atomic fragments
(fragmented packet with only one fragment).
When send ICMP error message, if the 1st truncated fragment is ICMP message,
icmp6_send() will break as is_ineligible() return true. So I added a check
in is_ineligible() to let fragment packet with nexthdr ICMP but no ICMP header
return false.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Adds reject skbuff creation helper functions to ipv4/6 nf_reject
infrastructure. Use these functions for reject verdict in bridge
family.
Can be reused by all different families that support reject and
will not inject the reject packet through ip local out.
Signed-off-by: Jose M. Guisado Gomez <guigom@riseup.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
For some protocol's gso, like SCTP, it's using GSO_BY_FRAGS for
gso_size. When using UDP to encapsulate its packet, it will
return error in udp6_ufo_fragment() as skb->len < gso_size,
and it will never go to the gso tunnel processing.
So we should move this check after udp gso tunnel processing,
the same as udp4_ufo_fragment() does.
v1->v2:
- no change.
v2->v3:
- not do any cleanup.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There is a chance that __udp4/6_lib_lookup() returns a udp encap
sock in __udp_lib_err(), like the udp encap listening sock may
use the same port as remote encap port, in which case it should
go to __udp4/6_lib_err_encap() for more validation before
processing the icmp packet.
This patch is to check encap_type in __udp_lib_err() for the
further validation for a encap sock.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 931ca7ab7f ("ip*_mc_gsfget(): lift copyout of struct group_filter
into callers") adjusted the type annotations for ip6_mc_msfget() at its
declaration, but missed the type annotations at its definition.
Hence, sparse complains on ./net/ipv6/mcast.c:
mcast.c:550:5: error: symbol 'ip6_mc_msfget' redeclared with different type \
(incompatible argument 3 (different address spaces))
Make ip6_mc_msfget() annotations consistent, which also resolves this
warning from sparse:
mcast.c:607:34: warning: incorrect type in argument 1 (different address spaces)
mcast.c:607:34: expected void [noderef] __user *to
mcast.c:607:34: got struct __kernel_sockaddr_storage *p
No functional change. No change in object code.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Link: https://lore.kernel.org/r/20201028115349.6855-1-lukas.bulwahn@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
net/ipv6/calipso.c:1236: warning: Excess function parameter 'reg' description in 'calipso_req_delattr'
net/ipv6/calipso.c:1236: warning: Function parameter or member 'req' not described in 'calipso_req_delattr'
net/ipv6/calipso.c:435: warning: Excess function parameter 'audit_secid' description in 'calipso_doi_remove'
net/ipv6/calipso.c:435: warning: Function parameter or member 'audit_info' not described in 'calipso_doi_remove'
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20201028013344.931928-1-andrew@lunn.ch
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
net/ipv6/rpl_iptunnel.c:15: warning: cannot understand function prototype: 'struct rpl_iptunnel_encap '
The header on the file containing the author copyright message uses
kerneldoc /** opener. This confuses the parser when it gets to
struct rpl_iptunnel_encap {
struct ipv6_rpl_sr_hdr srh[0];
};
Similarly:
net//ipv6/rpl.c:10: warning: Function parameter or member 'x' not described in 'IPV6_PFXTAIL_LEN'
where IPV6_PFXTAIL_LEN is a macro definition, not a function.
Convert the header comments to a plain /* comment.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20201028013123.931816-1-andrew@lunn.ch
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ip6_tnl_encap assigns to proto transport protocol which
encapsulates inner packet, but we must pass to set_inner_ipproto
protocol of that inner packet.
Calling set_inner_ipproto after ip6_tnl_encap might break gso.
For example, in case of encapsulating ipv6 packet in fou6 packet, inner_ipproto
would be set to IPPROTO_UDP instead of IPPROTO_IPV6. This would lead to
incorrect calling sequence of gso functions:
ipv6_gso_segment -> udp6_ufo_fragment -> skb_udp_tunnel_segment -> udp6_ufo_fragment
instead of:
ipv6_gso_segment -> udp6_ufo_fragment -> skb_udp_tunnel_segment -> ip6ip6_gso_segment
Fixes: 6c11fbf97e ("ip6_tunnel: add MPLS transmit support")
Signed-off-by: Alexander Ovechkin <ovov@yandex-team.ru>
Link: https://lore.kernel.org/r/20201029171012.20904-1-ovov@yandex-team.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
