This default-enables the devices found on the APQ8060 DragonBoard
in the qcom_defconfig:
- EBI2 bus
- SMSC911x ethernet
- LEDs class and PM8058 LEDs driver, trigger and heartbeat
trigger (so we get heartbeat on the board by default)
- IIO framework, including the HRTimer trigger, KXSD9
accelerometer, MPU3050 gyroscope, AK8975 magnetometer and
BMP085 pressure sensor
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
This patch enables thermal sensors and QFPROM support for qcom platforms.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
This patch enables configs required to get SATA functionality working on
IFC6410 board.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
IFC6410 board has PCIE based ATL1C ethernet controller, so enable related configs.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Enable support for clocks, controlled by the RPM processor on
Qualcomm platforms.
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
The Axentia TSE-850 is a SAMA5D3-based device designed to generate
FM subcarrier signals.
Signed-off-by: Peter Rosin <peda@axentia.se>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
We have upstream support for ftgmac100 ethernet with NCSI, GPIO, pinmux,
and IPMI BT. Enable these for both g4 and g5 platforms.
Signed-off-by: Joel Stanley <joel@jms.id.au>
This enables PWM and the TI ECAP and EHRWPM modules. These are used on LEGO
MINDSTORMS EV3.
Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
This enables the DA8xx pinconf driver by default. It is needed by LEGO
MINDSTORMS EV3.
Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Enable:
* Recently added Enable r8a774[35] SoCs
* CMA for DMA to allow use of VIN with large frame sizes
* CONFIG_VIDEO_ADV7604 to allow use of HDMI input
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=4Ph/
-----END PGP SIGNATURE-----
Merge tag 'renesas-defconfig-for-v4.11' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/defconfig
Renesas ARM Based SoC Defconfig Updates for v4.11
Enable:
* Recently added Enable r8a774[35] SoCs
* CMA for DMA to allow use of VIN with large frame sizes
* CONFIG_VIDEO_ADV7604 to allow use of HDMI input
* tag 'renesas-defconfig-for-v4.11' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: multi_v7_defconfig: Enable r8a774[35] SoCs
ARM: shmobile: defconfig: Enable r8a774[35] SoCs
ARM: shmobile: defconfig: Enable CMA for DMA
ARM: shmobile: defconfig: Enable CONFIG_VIDEO_ADV7604
Signed-off-by: Olof Johansson <olof@lixom.net>
The PXA defconfig compiles the legacy MPU3050 driver as a module,
but the device does not appear in device trees nor board files, so
remove this from the defconfig assuming it was a mistake to add it
in the first place.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
The Tegra is currently configured to use the old input driver for the
MPU-3050. Switch to the new IIO driver.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
The multi_v7 config enable the MPU3050 gyro input driver, but
there is now a dedicated IIO gyro driver for the same component,
which is the right subsystem to handle this. Replace it in the
defconfig. As we want the full IIO featureset and as other v7
systems will likely enjoy using IIO for their sensor work (such
as the Android-to-IIO userspace HAL), we take this opportunity to
turn on the standard sensor HRtimer triggering.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
This patch enables the Qualcomm RPM based Clock Controller present on
A-family boards.
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
ADC driver depends on REGULATOR and IIO that are not yet selected.
Current hardware boards (like stm32f429i-eval) is using fixed
regulators.
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com>
This enables the pwm-beeper module. This is used by the speaker on LEGO
MINDSTORMS EV3.
Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
All the Keystone 2 SoCs have an on-chip RAM called the MultiCore
Shared Memory (MSM) RAM managed by the Multicore Shared Memory
Controller (MSMC) that provides faster access compared to normal
DDR.
This patch enables the Generic on-chip SRAM driver that manages
this memory in software.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
The OMAP2 plus defconfig lists the LIS3LC02D MISC driver
but there is nowadays a proper IIO driver for this accelerometer.
Switch the config to the new driver.
The IIO software triggers are helpful when using these devices
without a dedicated IRQ line, so activate those too.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
MARVELL_PHY - support for the Marvell PHY that is on most of the devkits
EEPROM_AT24 - support for I2C EEPROMs on the devkits
GPIO_ALTERA - support for Altera's GPIO driver
NAND - support for the Denali NAND controller along with MTD subsystem
SPI_DESIGNWARE - support for SPI that is on SoCFPGA
SPI_DW_MMIO - support for the memory-mapped io interface for the DW SPI core
OF_CONFIGFS - SoCFPGA makes use of DT overlays using configfs, enable it
GPIO_ALTERA_A10SR - support for the newly added Altera HWMON driver
LEDS - support for the GPIO LEDs on the SoCFPGA devkits
RTC - support for the DS1307 RTC
JFFS2_FS - support for the JFFS2 filesystem
NFS_V4 - supports for v4 NFS
FUNCTION_TRACER - supports debug function tracing
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
To be able to use VIN with larger frame sizes CMA memory are needed for
DMA. If this is not enabled trying to capture large frames can result in
errors such as:
rcar-vin e6ef0000.video: dma_alloc_coherent of size 8388608 failed
A CMA area of 64MB are needed for v4l2-compliance to pass on all formats
on the largest possible frame size of 2048x2048.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
The adv7612 is used on Gen2 boards (Lager, Koelsch and Gose) for HDMI
input. Enable support for this chip in shmobile_defconfig.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
This enables the dumb-vga-dac driver by default for davinci boards.
The driver is needed for tilcdc support on da850-lcdk board.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Select CONFIG_CFG80211_WEXT so that wireless can work out of the box
when using userspace tools such as 'iwconfig'.
Generated by manually selecting CONFIG_CFG80211_WEXT and
then running:
make savedefconfig
cp defconfig arch/arm/configs/imx_v6_v7_defconfig
, which results in additional cleanup.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Enable media support and V4L2 capture, along with video decoders used
on da850 platforms.
Tested on da850-lcdk.
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
This enables CONFIG_THERMAL_OF by default for sunxi_defconfig. It is
required to get Allwinner SoCs' temperature from the GPADC driver.
The Allwinner SoCs all have an ADC that can also act as a touchscreen
controller and a thermal sensor. The first four channels can be used
either for the ADC or the touchscreen and the fifth channel is used for
the thermal sensor.
The thermal sensor requires the IP to be in touchscreen mode to return
correct values. Therefore, if the user is continuously reading the ADC
channel(s), the thermal framework in which the thermal sensor is
registered will switch the IP in touchscreen mode to get a temperature
value and requires a delay of 100ms (because of the mode switching),
then the ADC will switch back to ADC mode and requires also a delay of
100ms. If the ADC readings are critical to user and the SoC temperature
is not, the GPADC driver is capable of not registering the thermal
sensor in the thermal framework and thus, "quicken" the ADC readings. In
most use cases, the SoC temperature is more critical (for cpu throttling
for example or activating cooling devices) than ADC readings, thus it is
now enabled by default.
Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
NF_CT_PROTO_DCCP/SCTP/UDPLITE were switched from tristate to boolean so
defconfig needs to be adjusted to silence warnings:
warning: symbol value 'm' invalid for NF_CT_PROTO_DCCP
warning: symbol value 'm' invalid for NF_CT_PROTO_SCTP
warning: symbol value 'm' invalid for NF_CT_PROTO_UDPLITE
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Prior to Nikolay's commit dcd87999d, libnss-mdns (eg. to resolve
"foo.local" on the LAN using mDNS) worked without CONFIG_IP_MULTICAST
defined, but dcd87999d caused it to stop working without having
CONFIG_IP_MULTICAST defined explicitly.
Since exynos_defconfig did not previously define CONFIG_IP_MULTICAST,
mDNS used to work for users building with just exynos_defconfig, but
stopped working from dcd87999d.
Define CONFIG_IP_MULTICAST explicitly in exynos_defconfig as it appears
essential anyway.
Signed-off-by: Robie Basak <robie@justgohome.co.uk>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Defconfig additions, removals, etc. Most of these are small changes adding
the options for newly upstreamed drivers, or drivers needed for new board
support.
Bartlomiej Zolnierkiewicz has done a series of patches reducing the use
of CONFIG_IDE from 19 to 3 in favor of CONFIG_ATA.
Overall more patches than usual, but nothing big.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=2XsL
-----END PGP SIGNATURE-----
Merge tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC defconfig updates from Arnd Bergmann:
"Defconfig additions, removals, etc. Most of these are small changes
adding the options for newly upstreamed drivers, or drivers needed for
new board support.
Bartlomiej Zolnierkiewicz has done a series of patches reducing the
use of CONFIG_IDE from 19 to 3 in favor of CONFIG_ATA.
Overall more patches than usual, but nothing big"
* tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (54 commits)
ARM: davinci_all_defconfig: Enable da8xx usb otg
ARM: defconfig: drop GPIO_SYSFS on multiplatforms
ARM: multi_v7_defconfig: enable STMicroelectronics HVA driver
ARM: configs: Add new config fragment to change RAM start point
ARM: davinci_all_defconfig: Enable OHCI as module
ARM: defconfig: turn on the DT cpufreq for Integrator
ARM: omap2plus_defconfig: Run make savedefconfig to save some space
ARM: davinci_all_defconfig: add missing options for systemd
ARM: davinci_all_defconfig: enable the mstpri and ddrctl drivers
ARM: bcm2835: add thermal driver to default config
ARM: omap2plus_defconfig: Enable LP873X support
ARM: omap2plus_defconfig: Enable REGULATOR_GPIO
ARM: omap2plus_defconfig: Enable TOUCHSCREEN_TSC2004
ARM: socfpga_defconfig: enable FS configs to support Angstrom filesystem
ARM: config: Enable GPIO Key driver in stm32_defconfig
ARM: tegra: Enable GMI driver in default configuration
ARM: tegra: Enable SGTL5000 audio
ARM: tegra: Update default configuration for v4.9-rc1
ARM: socfpga: updates for socfpga_defconfig
ARM: davinci_all_defconfig: enable LED default-on trigger
...
Introduces remoteproc "subdevice" support, which allows remoteproc
driver to associate devices to the "running" state of the remoteproc,
allowing devices to be probed and removed as the remote processor is
booted, shut down or recovering from a crash.
Handling of virtio device resources was improved, vring memory is now
allocated as part of other memory allocation. This ensures that all
vrings for all virtio devices are allocated before we boot the remote
processor.
The debugfs mechanism for starting and stopping remoteproc instances was
replaced with a sysfs interface, also providing a mechanism for
specifying firmware to use by the instance. This allows user space to
load and boot use case specific firmware on remote processors.
New drivers for the ST Slimcore and Qualcomm Hexagon DSP as well as
removal of the unused StE modem loader.
Finally support for crash recovery in the Qualcomm Wirelss subsystem
(used for WiFi/BT/FM on a number of platforms) and a number of bug fixes
and cleanups.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=/1kU
-----END PGP SIGNATURE-----
Merge tag 'rproc-v4.10' of git://github.com/andersson/remoteproc
Pull remoteproc updates from Bjorn Andersson:
- introduce remoteproc "subdevice" support, which allows remoteproc
driver to associate devices to the "running" state of the remoteproc,
allowing devices to be probed and removed as the remote processor is
booted, shut down or recovering from a crash.
- handling of virtio device resources was improved, vring memory is now
allocated as part of other memory allocation. This ensures that all
vrings for all virtio devices are allocated before we boot the remote
processor.
- the debugfs mechanism for starting and stopping remoteproc instances
was replaced with a sysfs interface, also providing a mechanism for
specifying firmware to use by the instance. This allows user space to
load and boot use case specific firmware on remote processors.
- new drivers for the ST Slimcore and Qualcomm Hexagon DSP as well as
removal of the unused StE modem loader.
- finally support for crash recovery in the Qualcomm Wirelss subsystem
(used for WiFi/BT/FM on a number of platforms) and a number of bug
fixes and cleanups
* tag 'rproc-v4.10' of git://github.com/andersson/remoteproc: (49 commits)
remoteproc: qcom_adsp_pil: select qcom_scm
remoteproc: Drop wait in __rproc_boot()
remoteproc/ste: Delete unused driver
remoteproc: Remove "experimental" warning
remoteproc: qcom_adsp_pil: select qcom_scm
dt-binding: soc: qcom: smd: Add label property
remoteproc: qcom: mdt_loader: add include for sizes
remoteproc: Update last rproc_put users to rproc_free
remoteproc: qcom: adsp: Add missing MODULE_DEVICE_TABLE
remoteproc: wcnss-pil: add QCOM_SMD dependency
dmaengine: st_fdma: Revert: "Revert: Update st_fdma to 'depends on REMOTEPROC'"
remoteproc: Add support for xo clock
remoteproc: adsp-pil: fix recursive dependency
remoteproc: Introduce Qualcomm ADSP PIL
dt-binding: remoteproc: Introduce ADSP loader binding
remoteproc: qcom_wcnss: Fix circular module dependency
remoteproc: Merge table_ptr and cached_table pointers
remoteproc: Remove custom vdev handler list
remoteproc: Update max_notifyid as we allocate vrings
remoteproc: Decouple vdev resources and devices
...
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=4k30
-----END PGP SIGNATURE-----
Merge tag 'leds_for_4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds
Pull LED updates from Jacek Anaszewski:
- userspace LED class driver - it can be useful for testing triggers
and can also be used to implement virtual LEDs
- LED class driver for NIC78bx device
- LED core fixes for preventing potential races while setting
brightness when software blinking is enabled
- improvements in LED documentation to mention semantics on changing
brightness while trigger is active
* tag 'leds_for_4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds:
leds: pca955x: Add ACPI support
leds: netxbig: fix module autoload for OF registration
leds: pca963x: Add ACPI support
leds: leds-cobalt-raq: use builtin_platform_driver
led: core: Fix blink_brightness setting race
led: core: Use atomic bit-field for the blink-flags
leds: Add user LED driver for NIC78bx device
leds: verify vendor and change license in mlxcpld driver
leds: pca963x: enable low-power state
leds: pca9532: Use default trigger value from platform data
leds: pca963x: workaround group blink scaling issue
cleanup LED documentation and make it match reality
leds: lp3952: Export I2C module alias information for module autoload
leds: mc13783: Fix MC13892 keypad led access
ledtrig-cpu.c: fix english
leds/leds-lp5523.txt: make documentation match reality
tools/leds: Add uledmon program for monitoring userspace LEDs
leds: Use macro for max device node name size
leds: Introduce userspace LED class driver
mfd: qcom-pm8xxx: Clean up PM8XXX namespace
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=SQob
-----END PGP SIGNATURE-----
Merge tag 'davinci-for-v4.10/defconfig-4' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/defconfig
Enable support for MUSB based USB OTG on DA850.
* tag 'davinci-for-v4.10/defconfig-4' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
ARM: davinci_all_defconfig: Enable da8xx usb otg
Signed-off-by: Olof Johansson <olof@lixom.net>
The musb driver is enabled but the phy and the glue
for the da8xx are not enabled.
Enable them.
Signed-off-by: Alexandre Bailon <abailon@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Enable HVA (Hardware Video Accelerator) video encoder
driver for STMicroelectronics SoC.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=DIwx
-----END PGP SIGNATURE-----
Merge tag 'sti-defconfig-for-4.10-round3' of git://git.kernel.org/pub/scm/linux/kernel/git/pchotard/sti into next/defconfig
Pull "STi defconfig fix" from Patrice Chotard:
Enable HVA (Hardware Video Accelerator) video encoder
driver for STMicroelectronics SoC.
* tag 'sti-defconfig-for-4.10-round3' of git://git.kernel.org/pub/scm/linux/kernel/git/pchotard/sti:
ARM: multi_v7_defconfig: enable STMicroelectronics HVA driver
The sysfs ABI to GPIO is marked obsolete and should not be
encouraged. Users should be encouraged to switch to using the
character device.
Let's begin by removing it from the multi defconfigs. Then
as time goes by I can aggressively remove it from other
defconfigs.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
pull the following:
- Florian updates the multi_v7_defconfig with the relevant basic drivers needed
for the Broadcom BCM5301x (Northstar) SoCs to reboot, have PCIe, and Ethernet
- Martin enables the Raspberry Pi thermal driver in bcm2835_defconfig
-----BEGIN PGP SIGNATURE-----
iQIcBAABCAAGBQJYM9XQAAoJEIfQlpxEBwcEKOoQAK5q4Li17lF6i+Gd9Df831EH
sBMvlk+6aQv6gB2rZ/1GAw/wGoNxRVMS53kcCQmpAAr8WxzKdPpvmXZtOVlSbHWw
lkQ65Hj33qhVvpTivykzxUU4ZZJrV2BAN85nx75TJBiGZDMyYi119tkcxinknJmw
oNLvvgGSxqvpCFQF3L0yNdjNbq599p277jp+Kzet6/2+GmelSCFm7mTC5cleaZKr
kFkgBEQQCoyVl5EqdPIpHQiVQnyMxfrIKiMo14xnk8hmFjeoyKeidobGbkujwZJr
7kGTkRHP3uaFkmnzxBwMZv8b/qvvYrpTYLe0ryBJ+SDZDkpJSC5D+EIzok+vAqr5
4I2Cl6WuFtOwSbZsJvQEXrHNdV+XJ4xxXH5Mh/dv4MmscD7MCWn6PX5RGvPbWxQp
HleXXf2Z3X4k+6VXx0J4WiMdQyqzSLIxsJPG7z8uFlvX3nSbOYL67a+bRMdngpdB
GoxSj6jFcJZUMkPyH3acr1XV1o49T4vW0SxhehLQx9rFFJ8BqH4rCBRxC7j+qkiR
+ov+dpygnLu6OvzGFKbeVRQV1Fhf7uDbRkSByv9atHF+GD8K927JsUhl/RxGglo4
uRxMPffemv6V5RYqu+sKbiCEDYW0v4DyhhQs/iLxswcjxFNIAhLfAGrTCS0xjDVm
/5C45Bd+RM+M/avBPnn3
=Tf8a
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-4.10/defconfig' of http://github.com/Broadcom/stblinux into next/defconfig
Pull "Broadcom defconfig changes for 4.10" from Florian Fainelli:
This pull request contains Broadcom ARM-based defconfig changes for 4.10, please
pull the following:
- Florian updates the multi_v7_defconfig with the relevant basic drivers needed
for the Broadcom BCM5301x (Northstar) SoCs to reboot, have PCIe, and Ethernet
- Martin enables the Raspberry Pi thermal driver in bcm2835_defconfig
* tag 'arm-soc/for-4.10/defconfig' of http://github.com/Broadcom/stblinux:
ARM: bcm2835: add thermal driver to default config
ARM: multi_v7_defconfig: Enable BCM47xx/BCM5301x drivers
defconfig.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=pEwL
-----END PGP SIGNATURE-----
Merge tag 'davinci-for-v4.10/defconfig-3' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/defconfig
Pull "DaVinci defconfig updates for v4.10 (part 3)" from Sekhar Nori:
Enables newly introduced DDR controller and
master priority setting drivers in kernel.
Also, update defconfig to boot latest systemd
based filesystems on DA850.
A patch enabling USB OHCI support in davinci
defconfig.
* tag 'davinci-for-v4.10/defconfig-3' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
ARM: davinci_all_defconfig: Enable OHCI as module
ARM: davinci_all_defconfig: add missing options for systemd
ARM: davinci_all_defconfig: enable the mstpri and ddrctl drivers
Merge "IDE to PATA change in ARM defconfigs from Bartlomiej Zolnierkiewicz:
On Monday, October 31, 2016 07:14:13 PM Bartlomiej Zolnierkiewicz wrote:
> On Monday, October 31, 2016 03:46:22 PM Russell King - ARM Linux wrote:
> > On Wed, Oct 26, 2016 at 07:01:12PM +0200, Bartlomiej Zolnierkiewicz wrote:
> > > On Wednesday, July 13, 2016 04:37:31 PM Arnd Bergmann wrote:
> > > > I'd be fine with just getting a pull request with all the patches that
> > > > had no negative feedback and that were not already applied (if any).
> > >
> > > Here it is (sorry for taking so long).
> >
> > I've just been digging in the dmesg logs from when I was using the
> > Assabet+Neponset as my firewall, and it was having to use the IDE
> > ide-cs driver rather than the pata pcmcia driver.
> >
> > I don't recall whether the pata pcmcia driver was a problem or not,
> > as the PCMCIA interface can't cope with _any_ 32-bit accesses. I
> > think PATA tries to use the "highest" possible access size by
> > default...
>
> It doesn't actually - it defaults to 16-bits for PIO data access and
> you must explicitly enable 32-bits using ATA_PFLAG_PIO32 port flag
> (pata_pcmcia doesn't set it so it should be okay). Also taskfile
> registers are accessed using 8-bits access by default transport
> functions (which are used by pata_pcmcia).
Please also note that:
- assebet_defconfig currently doesn't even enable ide-cs
(CONFIG_BLK_DEV_IDECS) in the mainline kernel
- neponset_defconfig doesn't even enable IDE (CONFIG_IDE)
in the mainline kernel
so there is no risk of breaking anything..
* 'v4.9-rc2-arm-configs-pata' of https://github.com/bzolnier/linux:
arm: spitz_defconfig: convert to use libata PATA drivers
arm: s3c2410_defconfig: convert to use libata PATA drivers
arm: netwinder_defconfig: convert to use libata PATA drivers
arm: jornada720_defconfig: convert to use libata PATA drivers
arm: ixp4xx_defconfig: convert to use libata PATA drivers
arm: h3600_defconfig: convert to use libata PATA drivers
arm: corgi_defconfig: convert to use libata PATA drivers
arm: am200epdkit_defconfig: convert to use libata PATA drivers
arm: omap1_defconfig: convert to use libata PATA drivers
arm: collie_defconfig: convert to use libata PATA drivers
arm: shannon_defconfig: disable IDE subsystem
arm: mainstone_defconfig: disable IDE subsystem
arm: lart_defconfig: disable IDE subsystem
arm: cerfcube_defconfig: disable IDE subsystem
arm: badge4_defconfig: disable IDE subsystem
arm: assabet_defconfig: disable IDE subsystem
Enable the davinci ohci driver as a module for usb
tested with the omap138-lcdk board.
Signed-off-by: Axel Haslam <ahaslam@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
The Kconfig and file naming for the PM8xxx driver is totally
confusing:
- Kconfig options MFD_PM8XXX and MFD_PM8921_CORE, some in-kernel
users depending on or selecting either at random.
- A driver file named pm8921-core.c even if it is indeed
used by the whole PM8xxx family of chips.
- An irqchip named pm8xxx since it was (I guess) realized that
the driver was generic for all pm8xxx PMICs.
As I may want to add support for PM8901 this is starting to get
really messy. Fix this situation by:
- Remove the MFD_PM8921_CORE symbol and rely solely on MFD_PM8XXX
and convert all users, including LEDs Kconfig and ARM defconfigs
for qcom and multi_v7 to use that single symbol.
- Renaming the driver to qcom-pm8xxx.c to fit along the two
other qcom* prefixed drivers.
- Rename functions withing the driver from 8921 to 8xxx to
indicate it is generic.
- Just drop the =m config from the pxa_defconfig, I have no clue
why it is even there, it is not a Qualcomm platform. (Possibly
older Kconfig noise from saveconfig.)
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Gross <andy.gross@linaro.org>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Jacek Anaszewski <j.anaszewski@samsung.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Enable audio support for various Toradex devices as well as the GMI.
-----BEGIN PGP SIGNATURE-----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=zelz
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-4.10-arm-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/defconfig
ARM: tegra: Default configuration updates for v4.10-rc1
Enable audio support for various Toradex devices as well as the GMI.
* tag 'tegra-for-4.10-arm-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: tegra: Enable GMI driver in default configuration
ARM: tegra: Enable SGTL5000 audio
ARM: tegra: Update default configuration for v4.9-rc1
Signed-off-by: Olof Johansson <olof@lixom.net>
- Enable tsc2004 touchscreen as a loadable module
- Enable REGULATOR_GPIO, dra71-evm needs this for MMC voltage
- Enable LP873x PMICs for dra71x-evm
- Run make savedefconfig to save some space and make it
easier to generate minimal patches against it
-----BEGIN PGP SIGNATURE-----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=h0e5
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v4.10/defconfig-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/defconfig
Defconfig changes for omaps for v4.10 merge window:
- Enable tsc2004 touchscreen as a loadable module
- Enable REGULATOR_GPIO, dra71-evm needs this for MMC voltage
- Enable LP873x PMICs for dra71x-evm
- Run make savedefconfig to save some space and make it
easier to generate minimal patches against it
* tag 'omap-for-v4.10/defconfig-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: omap2plus_defconfig: Run make savedefconfig to save some space
ARM: omap2plus_defconfig: Enable LP873X support
ARM: omap2plus_defconfig: Enable REGULATOR_GPIO
ARM: omap2plus_defconfig: Enable TOUCHSCREEN_TSC2004
Signed-off-by: Olof Johansson <olof@lixom.net>
Two patches to enable the dumb VGA bridges in the multi_v7 and sunxi
defconfig.
-----BEGIN PGP SIGNATURE-----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=P4mc
-----END PGP SIGNATURE-----
Merge tag 'sunxi-defconfig-for-4.10' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into next/defconfig
Allwinner defconfig changes for 4.10
Two patches to enable the dumb VGA bridges in the multi_v7 and sunxi
defconfig.
* tag 'sunxi-defconfig-for-4.10' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux:
ARM: multi_v7: enable VGA bridge
ARM: sunxi: Enable VGA bridge
Signed-off-by: Olof Johansson <olof@lixom.net>
- Increase CMA size to 64 MiB, so that we can use etnaviv driver with
1920x1080 display devices.
- Enable ES8328 codec driver support, which is required by Kosagi
Novena boards.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJYKrrAAAoJEFBXWFqHsHzOj4EH/2hdhqbgnOXkYfxU1vp+Pic1
n3CAeRwtgIkfVWRxPn0ljx3XUppqnkGbTtn0JcgNDiPJnmiwhdPdVzUaekw+HVXL
kGp3O7gxnop7txSsCuMy6jFJxIpPPO0eiH8j0NfYv1WqjFo/6lJJmCaowxoEEKXn
T51/e7+W76WR294JruYDTgtDYHXphX58gI1vqAs/2r/wDFxThkxGSDQlNq8edrA7
dtP1urqDR6Q99eeA4gBNl/xqkN0NOKImf7wM05Pvyf5uRzVtHiYBhl3/3x2wgcsF
u9sehmu8vFPaifYbCoczxcRmiJew1ZAg0LdrFh1BJMnKRxbTVOl4NGPKYxALRT8=
=vMwU
-----END PGP SIGNATURE-----
Merge tag 'imx-defconfig-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/defconfig
i.MX defconfig updates for 4.10:
- Increase CMA size to 64 MiB, so that we can use etnaviv driver with
1920x1080 display devices.
- Enable ES8328 codec driver support, which is required by Kosagi
Novena boards.
* tag 'imx-defconfig-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: imx_v6_v7_defconfig: Select the es8328 codec driver
ARM: imx_v6_v7_defconfig: Increase CMA size
Signed-off-by: Olof Johansson <olof@lixom.net>
The Integrators are now migrated to handle the CPUfreq
scaling using the generic devicetree CPUfreq driver using the
common clock framework and have the required device tree
modifications, so turn off the old driver and turn on the new
generic driver.
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Russell King <linux@armlinux.org.uk>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
* 'sti-defconfig-for-4.10-round2' of git://git.kernel.org/pub/scm/linux/kernel/git/pchotard/sti:
ARM: multi_v7_defconfig: Remove ST_THERMAL_SYSCFG Kconfig symbol
Signed-off-by: Olof Johansson <olof@lixom.net>
This shrinks down omap2plus_defconfig a bit and makes it easier for
people to generate minimal patches against it.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Some kernel configuration options required for systemd
support are missing in davinci_all_defconfig. Add them.
This is based on recommendations in:
http://cgit.freedesktop.org/systemd/systemd/tree/README
Options which kernel enables by default (and will thus be removed
upon next savedefconfig update) are not included.
Tested on OMAP-L138 LCDK board with fully up to date armv5
archlinux filesystem.
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
With the da8xx memory controller and master peripheral priority
drivers merged and corresponding device tree changes in place we can
now enable appropriate options by default.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Add the thermal driver to list of compiled modules in the default
config for bcm2835.
Signed-off-by: Martin Sperl <kernel@martin.sperl.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Eric Anholt <eric@anholt.net>
LP873X family of PMICs are used in dra71x-evm, So enable the same.
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
GPIO regulator is used on dra71-evm platform to control MMCSD IO
voltage
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The LogicPD DM3730 Torpedo and SOM-LV devices have the TI
TSC2004 touchscreen controller. Enable the related driver as
a module.
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
systemd on the Angstrom root file system expects AUTOFS to be configured
as a module and NFSD to be statically linked into the kernel. This patch
adds the necessary configuration to get rid two "FAILED" error messages
during systemd startup.
Signed-off-by: Matthew Gerlach <mgerlach@opensource.altera.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
---
v2: provide a more descriptive changelog
The NVIDIA Tegra 3 aka T30 based Apalis T30 and Colibri T30 as well as
the new Tegra K1 aka TK1 based Apalis TK1 modules contain a Freescale
SGTL5000 analogue audio codec.
Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Regenerate the default configuration on top of v4.9-rc1. This shuffles
around a couple of symbols and drops some that have become defaults or
which were dropped.
Signed-off-by: Thierry Reding <treding@nvidia.com>
This patch enables the following in the
socfpga_defconfig:
+CONFIG_OF_OVERLAY=y
Enable support for Device Tree Overlays
+CONFIG_FPGA_REGION=y
Enable device tree overlay support for FPGA
programming
+CONFIG_FPGA_MGR_SOCFPGA_A10=y
Enable partial reconfiguration for Altera
Arria 10 FPGA
+CONFIG_FPGA_BRIDGE=y
Enable the FPGA Bridges framework
+CONFIG_SOCFPGA_FPGA_BRIDGE=y
Enable support for SoCFPGA hardware
bridges
+CONFIG_ALTERA_FREEZE_BRIDGE=y
Enable support for the Altera Soft IP
Freeze bridges
Signed-off-by: Alan Tull <atull@opensource.altera.com>
The LEDs default-on trigger is nice to have. For example, it can be used
to configure a LED as a power indicator.
Signed-off-by: David Lechner <david@lechnology.com>
[nsekhar@ti.com: build as module, subject line fixes]
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
This changes the davinci default configuration to build the davinci
MMC driver into the kernel. This allows booting from an SD card without
requiring an initrd containing the kernel module.
Signed-off-by: David Lechner <david@lechnology.com>
[nsekhar@ti.com: minor commit message adjustments]
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
The gpio-poweroff driver is needed by LEGO MINDSTORMS EV3 (AM1808 based
board).
Signed-off-by: David Lechner <david@lechnology.com>
[nsekhar@ti.com: subject line adjustment]
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
With the device tree changes for tilcdc in place, we can now enable
the driver by default in the davinci_all defconfig file.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
As STiH415/416 have been removed from kernel, remove IPs only found
on these socs, remove CONFIG_PHY_MIPHY365X and CONFIG_PHY_STIH41X_USB.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=5dHw
-----END PGP SIGNATURE-----
Merge tag 'sti-defconfig-for-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/pchotard/sti into next/defconfig
Remove STiH415/416 specific IPs
As STiH415/416 have been removed from kernel, remove IPs only found
on these socs, remove CONFIG_PHY_MIPHY365X and CONFIG_PHY_STIH41X_USB.
* tag 'sti-defconfig-for-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/pchotard/sti:
ARM: multi_v7_defconfig: Remove stih41x phy Kconfig symbol.
ARM: multi_v7_defconfig: Remove miphy365 phy Kconfig symbol.
Signed-off-by: Olof Johansson <olof@lixom.net>
Some config options like perf events and PM are now implicit,
we have an upstream driver for the AK8974, and we really
want the HRTIMER software triggers from configfs with some
of the sensors.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
IDE subsystem has been deprecated since 2009 and the majority
(if not all) of Linux distributions have switched to use
libata for ATA support exclusively. However there are still
some users (mostly old or/and embedded non-x86 systems) that
have not converted from using IDE subsystem to libata PATA
drivers. This doesn't seem to be good thing in the long-term
for Linux as while there is less and less PATA systems left
in use:
* testing efforts are divided between two subsystems
* having duplicate drivers for same hardware confuses users
This patch converts spitz_defconfig to use libata PATA
drivers.
Cc: Daniel Mack <daniel@zonque.org>
Cc: Haojian Zhuang <haojian.zhuang@gmail.com>
Cc: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
IDE subsystem has been deprecated since 2009 and the majority
(if not all) of Linux distributions have switched to use
libata for ATA support exclusively. However there are still
some users (mostly old or/and embedded non-x86 systems) that
have not converted from using IDE subsystem to libata PATA
drivers. This doesn't seem to be good thing in the long-term
for Linux as while there is less and less PATA systems left
in use:
* testing efforts are divided between two subsystems
* having duplicate drivers for same hardware confuses users
This patch converts s3c2410_defconfig to use libata PATA
drivers.
Cc: Kukjin Kim <kgene@kernel.org>
Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Cc: linux-samsung-soc@vger.kernel.org
Cc: Ben Dooks <ben.dooks@codethink.co.uk>
Cc: Vincent Sanders <vince@simtec.co.uk>
Cc: Simtec Linux Team <linux@simtec.co.uk>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
IDE subsystem has been deprecated since 2009 and the majority
(if not all) of Linux distributions have switched to use
libata for ATA support exclusively. However there are still
some users (mostly old or/and embedded non-x86 systems) that
have not converted from using IDE subsystem to libata PATA
drivers. This doesn't seem to be good thing in the long-term
for Linux as while there is less and less PATA systems left
in use:
* testing efforts are divided between two subsystems
* having duplicate drivers for same hardware confuses users
This patch converts netwinder_defconfig to use libata PATA
drivers.
Cc: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
IDE subsystem has been deprecated since 2009 and the majority
(if not all) of Linux distributions have switched to use
libata for ATA support exclusively. However there are still
some users (mostly old or/and embedded non-x86 systems) that
have not converted from using IDE subsystem to libata PATA
drivers. This doesn't seem to be good thing in the long-term
for Linux as while there is less and less PATA systems left
in use:
* testing efforts are divided between two subsystems
* having duplicate drivers for same hardware confuses users
This patch converts jornada720_defconfig to use libata PATA
drivers.
Cc: Kristoffer Ericson <kristoffer.ericson@gmail.com>
Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
IDE subsystem has been deprecated since 2009 and the majority
(if not all) of Linux distributions have switched to use
libata for ATA support exclusively. However there are still
some users (mostly old or/and embedded non-x86 systems) that
have not converted from using IDE subsystem to libata PATA
drivers. This doesn't seem to be good thing in the long-term
for Linux as while there is less and less PATA systems left
in use:
* testing efforts are divided between two subsystems
* having duplicate drivers for same hardware confuses users
This patch converts ixp4xx_defconfig to use libata PATA
drivers.
Cc: Imre Kaloz <kaloz@openwrt.org>
Cc: Krzysztof Halasa <khalasa@piap.pl>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
IDE subsystem has been deprecated since 2009 and the majority
(if not all) of Linux distributions have switched to use
libata for ATA support exclusively. However there are still
some users (mostly old or/and embedded non-x86 systems) that
have not converted from using IDE subsystem to libata PATA
drivers. This doesn't seem to be good thing in the long-term
for Linux as while there is less and less PATA systems left
in use:
* testing efforts are divided between two subsystems
* having duplicate drivers for same hardware confuses users
This patch converts h3600_defconfig to use libata PATA
drivers.
Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
IDE subsystem has been deprecated since 2009 and the majority
(if not all) of Linux distributions have switched to use
libata for ATA support exclusively. However there are still
some users (mostly old or/and embedded non-x86 systems) that
have not converted from using IDE subsystem to libata PATA
drivers. This doesn't seem to be good thing in the long-term
for Linux as while there is less and less PATA systems left
in use:
* testing efforts are divided between two subsystems
* having duplicate drivers for same hardware confuses users
This patch converts corgi_defconfig to use libata PATA
drivers.
Cc: Daniel Mack <daniel@zonque.org>
Cc: Haojian Zhuang <haojian.zhuang@gmail.com>
Cc: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
IDE subsystem has been deprecated since 2009 and the majority
(if not all) of Linux distributions have switched to use
libata for ATA support exclusively. However there are still
some users (mostly old or/and embedded non-x86 systems) that
have not converted from using IDE subsystem to libata PATA
drivers. This doesn't seem to be good thing in the long-term
for Linux as while there is less and less PATA systems left
in use:
* testing efforts are divided between two subsystems
* having duplicate drivers for same hardware confuses users
This patch converts am200epdkit_defconfig to use libata PATA
drivers.
Cc: Daniel Mack <daniel@zonque.org>
Cc: Haojian Zhuang <haojian.zhuang@gmail.com>
Cc: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
IDE subsystem has been deprecated since 2009 and the majority
(if not all) of Linux distributions have switched to use
libata for ATA support exclusively. However there are still
some users (mostly old or/and embedded non-x86 systems) that
have not converted from using IDE subsystem to libata PATA
drivers. This doesn't seem to be good thing in the long-term
for Linux as while there is less and less PATA systems left
in use:
* testing efforts are divided between two subsystems
* having duplicate drivers for same hardware confuses users
This patch converts omap1_defconfig to use libata PATA
drivers.
Cc: linux-omap@vger.kernel.org
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
IDE subsystem has been deprecated since 2009 and the majority
(if not all) of Linux distributions have switched to use
libata for ATA support exclusively. However there are still
some users (mostly old or/and embedded non-x86 systems) that
have not converted from using IDE subsystem to libata PATA
drivers. This doesn't seem to be good thing in the long-term
for Linux as while there is less and less PATA systems left
in use:
* testing efforts are divided between two subsystems
* having duplicate drivers for same hardware confuses users
This patch converts collie_defconfig to use libata PATA
drivers.
Acked-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
This patch disables deprecated IDE subsystem in shannon_defconfig
(no IDE host drivers are selected in this config so there is no
valid reason to enable IDE subsystem itself).
Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
This patch disables deprecated IDE subsystem in mainstone_defconfig
(no IDE host drivers are selected in this config so there is no valid
reason to enable IDE subsystem itself).
Cc: Daniel Mack <daniel@zonque.org>
Cc: Haojian Zhuang <haojian.zhuang@gmail.com>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
This patch disables deprecated IDE subsystem in lart_defconfig
(no IDE host drivers are selected in this config so there is no
valid reason to enable IDE subsystem itself).
Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
This patch disables deprecated IDE subsystem in cerfcube_defconfig
(no IDE host drivers are selected in this config so there is no
valid reason to enable IDE subsystem itself).
Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
This patch disables deprecated IDE subsystem in badge4_defconfig
(no IDE host drivers are selected in this config so there is no
valid reason to enable IDE subsystem itself).
Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
This patch disables deprecated IDE subsystem in assabet_defconfig
(no IDE host drivers are selected in this config so there is no
valid reason to enable IDE subsystem itself).
Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
All of the SoCFPGA boards have at least 1GB of RAM, so enabling HIGHMEM
is necessary to avoid the following warning:
[ 0.000000] Truncating RAM at 0x00000000-0x40000000 to -0x30000000
[ 0.000000] Consider using a HIGHMEM enabled kernel.
Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
Select CONFIG_SND_SOC_ES8328 so that we can have audio functional
by default on Kosagi Novena boards.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Increase the CMA size to 64 MiB, otherwise it isn't possible to use
etnaviv driver on systems with 1920x1080 panel due to insufficient
memory .
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
STiH415/6 SoC support is being removed from the kernel and
was the only platform using this Kconfig symbol
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
This IP is only found on STiH415/6 silicon and support
for these SoCs is being removed from the kernel.
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Cc: <kishon@ti.com>
Acked-by: Patrice Chotard <patrice.chotard@st.com>
This IP is only found on STiH415/6 silicon and support
for these SoCs is being removed from the kernel.
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Cc: <kishon@ti.com>
Acked-by: Patrice Chotard <patrice.chotard@st.com>
Add a bunch of required drivers and subsystems:
- BCMA is the on-chip discoverable bus which registers a bunch of
peripherals
- Enable the BCM47xx watchdog driver to get working system reboot
- Enable the BCM47xx NVRAM/SPROM drivers to be able to fetch MAC
addresses and other variables needed for system operation
- Make BGMAC (built-in Ethernet adapter) a module
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
This patch enables the STi ALSA drivers found on STi platforms
as well as the simple-card driver which is a dependency to have
working sound.
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Cc: arnaud.pouliquen@st.com
Cc: broonie@kernel.org
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
This DMA controller is found on all STi chipsets.
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
The st231 remote coprocessors are found on all STi chipsets.
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Now that remoteproc core is selectable it needs to be enabled
in the multi_v7 build.
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Enable support for the Intel e1000e driver
Signed-off-by: Ray Jui <rjui@broadcom.com>
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Exynos5 SoCs have a General SCALER (GSCALER) IP block that can be used
to do video streams scaling and color space conversions by hardware.
Enable support for its driver as a module so the GSCALER can be tested.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Exynos5 SoCs have a General SCALER (GSCALER) IP block that can be used
to do video streams scaling and color space conversions by hardware.
Enable support for its driver as a module so the GSCALER can be tested.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Enable support for CONFIG_CGROUPS in shmobile_defconfig.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Defconfig additions, removals, etc. Most of these are small changes adding
the options for newly upstreamed drivers, or drivers needed for new board
support. Nothing specifically sticks out this time.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=0DnU
-----END PGP SIGNATURE-----
Merge tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC defconfig updates from Arnd Bergmann:
"Defconfig additions, removals, etc. Most of these are small changes
adding the options for newly upstreamed drivers, or drivers needed for
new board support. Nothing specifically sticks out this time"
* tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (25 commits)
ARM: multi_v7_defconfig: enable CONFIG_EFI
ARM: multi_v7_defconfig: Build Atmel maXTouch driver as a module
ARM: defconfig: update the Integrator defconfig
ARM: keystone: defconfig: Fix USB configuration
ARM: imx_v6_v7_defconfig: Select the wm8960 codec driver
ARM: omap2plus_defconfig: switch to the IIO BMP085 driver
ARM: mvebu_v5_defconfig: use MV88E6XXX
ARM: davinci_all_defconfig: Enable some UBI modules
ARM: davinci_all_defconfig: Enable AEMIF as a module
ARM: multi_v7_defconfig: Enable SECCOMP
ARM: exynos_defconfig: Enable SECCOMP
ARM: imx_v6_v7_defconfig: Add CONFIG_MPL3115
ARM: imx_v6_v7_defconfig: Enable GPU support
ARM: s3c2410_defconfig: Remove CONFIG_IPV6_PRIVACY
ARM: exynos_defconfig: Enable PM_DEBUG
ARM: exynos_defconfig: Enable bus frequency scaling with devfreq
ARM: imx_v6_v7_defconfig: enable more USB configurations
ARM: davinci_all_defconfig: enable SMSC ethernet PHY
ARM: davinci_all_defconfig: enable RTC driver as module
ARM: multi_v7_defconfig: Enable ARM_IMX6Q_CPUFREQ
...
These are updates for platform specific code on 32-bit ARM machines,
essentially anything that can not (yet) be expressed using DT files.
Noteworthy changes include:
- We get support for running in big-endian mode on two platforms:
sunxi (Allwinner) and s3c24xx (old Samsung).
- The recently added Uniphier platform now uses standard PSCI
methods for SMP booting and we remove support for old bootloader
versions that did not support it yet.
- In sunxi, we gain support for the "Nextthing GR8" SoC, which
is a close relative of the Allwinner A13 and R8 chips.
- PXA completes its move over to the generic dmaengine framework
and removes its old private API
- mach-bcm gains support for BCM47189/BCM53573, their first ARM
SoC with integrated 802.11ac wireless networking.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=y4XF
-----END PGP SIGNATURE-----
Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC platform updates from Arnd Bergmann:
"These are updates for platform specific code on 32-bit ARM machines,
essentially anything that can not (yet) be expressed using DT files.
Noteworthy changes include:
- We get support for running in big-endian mode on two platforms:
sunxi (Allwinner) and s3c24xx (old Samsung).
- The recently added Uniphier platform now uses standard PSCI methods
for SMP booting and we remove support for old bootloader versions
that did not support it yet.
- In sunxi, we gain support for the "Nextthing GR8" SoC, which is a
close relative of the Allwinner A13 and R8 chips.
- PXA completes its move over to the generic dmaengine framework and
removes its old private API
- mach-bcm gains support for BCM47189/BCM53573, their first ARM SoC
with integrated 802.11ac wireless networking"
* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (54 commits)
ARM: imx legacy: pca100: move peripheral initialization to .init_late
ARM: imx legacy: mx27ads: move peripheral initialization to .init_late
ARM: imx legacy: mx21ads: move peripheral initialization to .init_late
ARM: imx legacy: pcm043: move peripheral initialization to .init_late
ARM: imx legacy: mx35-3ds: move peripheral initialization to .init_late
ARM: imx legacy: mx27-3ds: move peripheral initialization to .init_late
ARM: imx legacy: imx27-visstrim-m10: move peripheral initialization to .init_late
ARM: imx legacy: vpr200: move peripheral initialization to .init_late
ARM: imx legacy: mx31moboard: move peripheral initialization to .init_late
ARM: imx legacy: armadillo5x0: move peripheral initialization to .init_late
ARM: imx legacy: qong: move peripheral initialization to .init_late
ARM: imx legacy: mx31-3ds: move peripheral initialization to .init_late
ARM: imx legacy: pcm037: move peripheral initialization to .init_late
ARM: imx legacy: mx31lilly: move peripheral initialization to .init_late
ARM: imx legacy: mx31ads: move peripheral initialization to .init_late
ARM: imx legacy: mx31lite: move peripheral initialization to .init_late
ARM: imx legacy: kzm: move peripheral initialization to .init_late
MAINTAINERS: update list of Oxnas maintainers
ARM: orion5x: remove extraneous NO_IRQ
ARM: orion: simplify orion_ge00_switch_init
...
The cleanups for v4.9 are a little larger that usual, but thankfully
that is almost exclusively due to removing a significant number of
files that have become obsolete after the still ongoing conversion
of old board files to devicetree.
- for mach-omap2, which is still the largest platform in arch/arm/,
the conversion to DT is finally complete after the Nokia N900 is
now fully supported there, along with the omap3 LDP, and we can
remove those two board files.
If no regressions are found, another large cleanup for the platform
will happen as a follow-up, removing dead code and restructuring
the platform based on being DT-only.
- In mach-imx, similar work is ongoing, but has not come that far.
This time, we remove the obsolete board file for the i.MX1
generation, which like i.MX25, i.MX5, i.MX6, and i.MX7 is now DT-only.
The remaining board files are for i.MX2 and i.MX3 machines
based on old ARM926 or ARM1136 cores that should work with DT
in principle.
- realview has just been converted from board files to DT, and a lot
of code gets removed in the process. This is the last
ARM/Keil/Versatile derived platform that was still using board
files, the other ones being integrator, versatile and vexpress.
We can probably merge the remaining code into a single directory
in the near future.
- clps711x had completed the conversion in v4.8, but we accidentally
left the files in place that should have been deleted then.
Conflicts: two files deleted here have been modified upstream,
the changes can be discarded.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=WaLy
-----END PGP SIGNATURE-----
Merge tag 'armsoc-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC cleanups from Arnd Bergmann:
"The cleanups for v4.9 are a little larger that usual, but thankfully
that is almost exclusively due to removing a significant number of
files that have become obsolete after the still ongoing conversion of
old board files to devicetree.
- for mach-omap2, which is still the largest platform in arch/arm/,
the conversion to DT is finally complete after the Nokia N900 is
now fully supported there, along with the omap3 LDP, and we can
remove those two board files. If no regressions are found, another
large cleanup for the platform will happen as a follow-up, removing
dead code and restructuring the platform based on being DT-only.
- In mach-imx, similar work is ongoing, but has not come that far.
This time, we remove the obsolete board file for the i.MX1
generation, which like i.MX25, i.MX5, i.MX6, and i.MX7 is now
DT-only. The remaining board files are for i.MX2 and i.MX3 machines
based on old ARM926 or ARM1136 cores that should work with DT in
principle.
- realview has just been converted from board files to DT, and a lot
of code gets removed in the process. This is the last
ARM/Keil/Versatile derived platform that was still using board
files, the other ones being integrator, versatile and vexpress. We
can probably merge the remaining code into a single directory in
the near future.
- clps711x had completed the conversion in v4.8, but we accidentally
left the files in place that should have been deleted then"
* tag 'armsoc-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (21 commits)
ARM: select PCI_DOMAINS config from ARCH_MULTIPLATFORM
ARM: stop *MIGHT_HAVE_PCI* config from being selected redundantly
ARM: imx: (trivial) fix typo and grammar
ARM: clps711x: remove extraneous files
ARM: imx: use IS_ENABLED() instead of checking for built-in or module
ARM: OMAP2+: use IS_ENABLED() instead of checking for built-in or module
ARM: OMAP1: use IS_ENABLED() instead of checking for built-in or module
ARM: imx: remove platform-mxc_rnga
ARM: realview: imply device tree boot
ARM: realview: no need to select SMP_ON_UP explicitly
ARM: realview: delete the RealView board files
ARM: imx: no need to select SMP_ON_UP explicitly
ARM: i.MX: Move SOC_IMX1 into 'Device tree only'
ARM: i.MX: Remove i.MX1 non-DT support
ARM: i.MX: Remove i.MX1 Synertronixx SCB9328 board support
ARM: i.MX: Remove i.MX1 Armadeus APF9328 board support
ARM: mxs: remove obsolete startup code for TX28
ARM: i.MX31 iomux: remove duplicates with alternate name
ARM: i.MX31 iomux: remove plain duplicates
ARM: OMAP2+: Drop legacy board file for LDP
...
* pm-cpufreq: (24 commits)
cpufreq: st: add missing \n to end of dev_err message
cpufreq: kirkwood: add missing \n to end of dev_err messages
cpufreq: CPPC: Avoid overflow when calculating desired_perf
cpufreq: ti: Use generic platdev driver
cpufreq: intel_pstate: Add io_boost trace
cpufreq: intel_pstate: Use IOWAIT flag in Atom algorithm
cpufreq: schedutil: Add iowait boosting
cpufreq / sched: SCHED_CPUFREQ_IOWAIT flag to indicate iowait condition
cpufreq: CPPC: Force reporting values in KHz to fix user space interface
cpufreq: create link to policy only for registered CPUs
intel_pstate: constify local structures
cpufreq: dt: Support governor tunables per policy
cpufreq: dt: Update kconfig description
cpufreq: dt: Remove unused code
MAINTAINERS: Add Documentation/cpu-freq/
cpufreq: dt: Add support for r8a7792
cpufreq / sched: ignore SMT when determining max cpu capacity
cpufreq: Drop unnecessary check from cpufreq_policy_alloc()
ARM: multi_v7_defconfig: Don't attempt to enable schedutil governor as module
ARM: exynos_defconfig: Don't attempt to enable schedutil governor as module
...
The Exynos MIPI driver does not work anymore (it is board file only) so
it is removed. Remove also config options.
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Donghwa Lee <dh09.lee@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
This enables CONFIG_EFI for multi_v7_defconfig, which adds support for
booting via EFI, and for the EFI framebuffer as builtin options. It
also enables the EFI rtc, the EFI variable pseudo-filesystem and the
EFI capsule loader as modules.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Drop i.MX1 board files and make i.MX1 a DT only platform.
- Remove obsolete ENET initialization code for TX28 board, since FEC
driver handles those setup well now.
- A couple of cleanups on i.MX31 IOMUX headers to drop duplications
- A few other random and trivial cleanups
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJX1k9/AAoJEFBXWFqHsHzOcXoH/1OqY6dSOI7MrzwocYhXE+mI
eqgQ/5/N3EsaA01NQpdreffGfa1FlNwIwZ6+9XY4EateQt2U/dPKWX0xDkMpo8c+
CNOciiZ4bZ811w+7NfYiEZ0BTIm2ouFuNJLbadPb6tl+0ssUGvEEelH/UbMjT331
DkzMWaqOv6W2ldKT++UF+IrDCGVUI55leqM5WrQDK8qFkBn6KdnYeFG3+4P58hZ3
XhXuv00UJUxB1L1E3TPG+1MVxDD8G5ge4ZXtIxzECgyAbAbQboyNkXai+qcr4dN9
XIleT0YCYtXSEsvEkfWoU3GjZC9pSZmUFhmlWtWmkuFh9H2zAalRZKNVEBNGpQQ=
=qHgE
-----END PGP SIGNATURE-----
Merge tag 'imx-cleanup-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/cleanup
Pull "i.MX cleanup for 4.9" from Shawn Guo:
- Drop i.MX1 board files and make i.MX1 a DT only platform.
- Remove obsolete ENET initialization code for TX28 board, since FEC
driver handles those setup well now.
- A couple of cleanups on i.MX31 IOMUX headers to drop duplications
- A few other random and trivial cleanups
* tag 'imx-cleanup-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: imx: (trivial) fix typo and grammar
ARM: imx: use IS_ENABLED() instead of checking for built-in or module
ARM: imx: remove platform-mxc_rnga
ARM: imx: no need to select SMP_ON_UP explicitly
ARM: i.MX: Move SOC_IMX1 into 'Device tree only'
ARM: i.MX: Remove i.MX1 non-DT support
ARM: i.MX: Remove i.MX1 Synertronixx SCB9328 board support
ARM: i.MX: Remove i.MX1 Armadeus APF9328 board support
ARM: mxs: remove obsolete startup code for TX28
ARM: i.MX31 iomux: remove duplicates with alternate name
ARM: i.MX31 iomux: remove plain duplicates
Simply enabling CONFIG_KEYSTONE_USB_PHY doesn't work anymore
as it depends on CONFIG_NOP_USB_XCEIV. We need to enable
that as well.
This fixes USB on Keystone boards from v4.8-rc1 onwards.
Signed-off-by: Roger Quadros <rogerq@ti.com>
Acked-by: Santosh Shilimkar <ssantosh@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This cycle is covering :
- the removal of the legacy DMA API
This is the major contributor to the negative diffstat, as dmaengine
have taken over in this area.
- IDE subsystem defconfig fixes
- preparation for pxa25x to be device-tree compliant
- various irq related fixes
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=kAKB
-----END PGP SIGNATURE-----
Merge tag 'pxa-for-4.9' of https://github.com/rjarzmik/linux into next/soc
Pull "This is the pxa changes for v4.9 cycle" from Robert Jarzmik:
This cycle is covering :
- the removal of the legacy DMA API
This is the major contributor to the negative diffstat, as dmaengine
have taken over in this area.
- IDE subsystem defconfig fixes
- preparation for pxa25x to be device-tree compliant
- various irq related fixes
* tag 'pxa-for-4.9' of https://github.com/rjarzmik/linux:
ARM: pxa: pxa_cplds: fix interrupt handling
ARM: pxa: remove irq init from dt machines
ARM: pxa: Use kmalloc_array() in pxa_pm_init()
ARM: pxa: magician: Remove duplicated I2C pins declaration
ARM: pxa: fix GPIO double shifts
arm: trizeps4_defconfig: disable IDE subsystem
arm: pxa255-idp_defconfig: disable IDE subsystem
arm: lpda270_defconfig: disable IDE subsystem
arm: colibri_pxa270_defconfig: disable IDE subsystem
ARM: pxa: add pxa25x device-tree support
ARM: pxa: prepare pxa25x interrupts for device-tree platforms
ARM: pxa: remove platform dma code
ARM: pxa: remove devicetree boards from pxa_defconfig
- Enable i.MX6 SATA and cpufreq driver support in multi_v7_defconfig.
- Enable MPL3115, Etnaviv GPU, WM8960 Codec driver and more USB
functions support in imx_v6_v7_defconfig.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJX1lztAAoJEFBXWFqHsHzOIdcIALyc4nkJXR1XYYTfL7h+KkgC
YozZ7dX2JyU4n+lYtRz1wLc9SANUu3Of6Ecipk+Y7Djnen0G5Qet6rP5NXzFwmVM
gy5OwctXUaWv7muynLf3SIFyFZ5b+mKwO2n2b/88E5mbSEUXskD/b8lYm/i4XHeJ
Ev3NfAaKo5eDCA39VNsNuD8XkC9wz5CaHbQNCR3hBmHUo9Fjh2eMcloy7/zcbXE9
tVIrZrIzge7l9s5UE1gMYvChQKPE/3tQRhS7NlqFAM4zQfbhQYN1UjibZfoizlMi
jWQxpjZo5VsVOZ1uHPPjdMbjOVHfnUWkSV/l6AAmo4Mnftt83Y3fFxQ+jPHIWgY=
=/Z7R
-----END PGP SIGNATURE-----
Merge tag 'imx-defconfig-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/defconfig
Merge "i.MX defconfig updates for 4.9" from Shawn Guo:
- Enable i.MX6 SATA and cpufreq driver support in multi_v7_defconfig.
- Enable MPL3115, Etnaviv GPU, WM8960 Codec driver and more USB
functions support in imx_v6_v7_defconfig.
* tag 'imx-defconfig-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: imx_v6_v7_defconfig: Select the wm8960 codec driver
ARM: imx_v6_v7_defconfig: Add CONFIG_MPL3115
ARM: imx_v6_v7_defconfig: Enable GPU support
ARM: imx_v6_v7_defconfig: enable more USB configurations
ARM: multi_v7_defconfig: Enable ARM_IMX6Q_CPUFREQ
ARM: multi_v7_defconfig: Enable AHCI_IMX
- update dsa config with new symbol
- add flash related config for mvebu v7
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iEYEABECAAYFAlfMQVUACgkQCwYYjhRyO9XsjwCfXdMXmR+QEF+zFB/K/Z5E2BWO
RFYAnRWBOjELgMuH1Q14Sw8ANEj1H5/A
=ZV+v
-----END PGP SIGNATURE-----
Merge tag 'mvebu-defconfig-4.9-1' of git://git.infradead.org/linux-mvebu into next/defconfig
Pull "mvebu defconfig for 4.9 (part 1)" from Gregory CLEMENT:
- update dsa config with new symbol
- add flash related config for mvebu v7
* tag 'mvebu-defconfig-4.9-1' of git://git.infradead.org/linux-mvebu:
ARM: mvebu_v5_defconfig: use MV88E6XXX
ARM: mvebu: enable UBI and UBIFS in mvebu_v7_defconfig
ARM: mvebu: enable MTD command line partition table in mvebu_v7_defconfig
Keystone usb phy needs CONFIG_NOP_USB_XCEIV to be enabled.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJXx15hAAoJEHJsHOdBp5c/4i4P/iOGMsKUNltw1qiqN5nihF0V
GWaaVk/vz1oXjm98CyfPOPK9+u5SioRrm04nzhQdSTUmqZNtGJg1PKWjtJcyKuQZ
ajZpD+1QdviFJw+/Gffdxsw38W5nQ6X5//IzSYR68CWXet11zrujBJA4GK7Mxs3Y
fFkehrBIgcgeIdwIRx8HuZWu1+xtVDWwXIc5f/LxoIATffaSMTMapW8QTiPvvWxk
HB+p8LshwPAS71vnzC4GUHPinEVLawesPLUDxq56e+DCKspq20UsOWezc/JEvUNL
X2IXvODFx+9WyIdgErdt0+00ljiVw4KWEGexAaYqVUmmbSARA45/vULUkoOZ6qIY
u8vy3L58A2E7KvLi2U5ma5mHzRs7bSOuoFO9hhjSLG1nbjyz3HcPmYgTXyP9hCPR
L16nwlrcAsc4M+u7HD7RR7vuUteQcqhYo8cLsDJjwJcwyicmIGRewBQI3to1s5sJ
h8iu1atoJC4yPvTEpI8iflpuqkCMfvntkvOlmiyVJ0EyEPxBNli8QKOo2tq1MfSZ
J4rHWQq8DB8EWoqkrEC8hnRof2Sa//0B44AXffujwzdng+LiYVBYbbSmQ8Q/L86T
l7WN2a+mqfYfJPrxB7lF9WzH14fy7SVCOuuxmJqdAYImw4/QBm6ecBkkH6JhGXdL
+OAXb4QFg7YC7+c7BtBn
=jzCV
-----END PGP SIGNATURE-----
Merge tag 'keystone_config_for_4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into next/defconfig
Pull "ARM: config: Add CONFIG_NOP_USB_XCEIV" from Santosh Shilimkar:
Keystone usb phy needs CONFIG_NOP_USB_XCEIV to be enabled.
* tag 'keystone_config_for_4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone:
ARM: keystone: defconfig: Fix USB configuration
defconfigs.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=So6k
-----END PGP SIGNATURE-----
Merge tag 'samsung-defconfig-schedutil-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into pm-cpufreq-sched
The schedutil cpufreq governor will be switched from tristate to bool. Fix
defconfigs.
* tag 'samsung-defconfig-schedutil-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: multi_v7_defconfig: Don't attempt to enable schedutil governor as module
ARM: exynos_defconfig: Don't attempt to enable schedutil governor as module
generic IIO BMP280 driver instead of the BMP085.
-----BEGIN PGP SIGNATURE-----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=XyS9
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v4.9/defconfig-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/defconfig
Merge "omap defconfig updates for v4.9 merge window" from Tony Lindgren:
A patch from Linus Walleij <linus.walleij@linaro.org> to switch to use
generic IIO BMP280 driver instead of the BMP085.
* tag 'omap-for-v4.9/defconfig-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: omap2plus_defconfig: switch to the IIO BMP085 driver
1. Device dynamic frequency and voltage scalling is now supported
on many Exynos boards, enable it.
2. Enable PM_DEBUG, cleanup old IPV6_PRIVACY.
3. Enable SECCOMP for Systemd on Arch.
4. cpufreq schedutil cannot be module anymore.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=2fYj
-----END PGP SIGNATURE-----
Merge tag 'samsung-defconfig-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/defconfig
Merge "Samsung defconfig update for v4.9" from Krzysztof Kozlowski:
1. Device dynamic frequency and voltage scalling is now supported
on many Exynos boards, enable it.
2. Enable PM_DEBUG, cleanup old IPV6_PRIVACY.
3. Enable SECCOMP for Systemd on Arch.
4. cpufreq schedutil cannot be module anymore.
* tag 'samsung-defconfig-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: multi_v7_defconfig: Don't attempt to enable schedutil governor as module
ARM: exynos_defconfig: Don't attempt to enable schedutil governor as module
ARM: multi_v7_defconfig: Enable SECCOMP
ARM: exynos_defconfig: Enable SECCOMP
ARM: s3c2410_defconfig: Remove CONFIG_IPV6_PRIVACY
ARM: exynos_defconfig: Enable PM_DEBUG
ARM: exynos_defconfig: Enable bus frequency scaling with devfreq
savedefconfig and enabling various commonly used
drivers as modules.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=APJu
-----END PGP SIGNATURE-----
Merge tag 'davinci-for-v4.9/defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/defconfig
Merge "DaVinci defconfig updates for v4.9" from Sekhar Nori:
DaVinci defconfig updates include cleanup using
savedefconfig and enabling various commonly used
drivers as modules.
* tag 'davinci-for-v4.9/defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
ARM: davinci_all_defconfig: Enable some UBI modules
ARM: davinci_all_defconfig: Enable AEMIF as a module
ARM: davinci_all_defconfig: enable SMSC ethernet PHY
ARM: davinci_all_defconfig: enable RTC driver as module
ARM: davinci_all_defconfig: enable DA850 audio as modules
ARM: davinci_all_defconfig: cleanup with savedefconfig
The driver is for a trackpad device so is not needed for booting and
makes more sense to have it as module to reduce the kernel image size.
It was probably enabled as built-in because module autoload was not
working when the I2C device was registered by OF but this got fixed
in commit b7d21058b4 ("Input: atmel_mxt_ts - add maxtouch to I2C
table for module autoload") so it's safe to enable as a module now.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The Integrators defconfig have changed due to changes in
Kconfig for the CPU types, they use the physmap OF NOR
driver and syscon for LEDs.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Simply enabling CONFIG_KEYSTONE_USB_PHY doesn't work anymore
as it depends on CONFIG_NOP_USB_XCEIV. We need to enable
that as well.
This fixes USB on Keystone boards from v4.8-rc1 onwards.
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
Select CONFIG_SND_SOC_WM8960 so that we can have audio functional
by default on imx6ul-evk and imx7-sdb boards.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This alters the OMAP2plus defconfig to use the IIO BMP280
driver, which is compatible with the BMP085 instead of the old
BMP085-specific misc driver. The IIO driver nowadays have all
the features of the old driver and more.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
This enables UBI+UBIFS to handle the NAND MTDs, including the useful
MTD_UBI_BLOCK.
Signed-off-by: Karl Beldan <kbeldan@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
The schedutil CPUFreq governor could be built as a module but the change
"cpufreq / sched: Pass flags to cpufreq_update_util()" made it
non-modular so attempting to enable as module leads to a warning:
warning: symbol value 'm' invalid for CPU_FREQ_GOV_SCHEDUTIL
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
The schedutil CPUFreq governor could be built as a module but the change
"cpufreq / sched: Pass flags to cpufreq_update_util()" made it
non-modular so attempting to enable as module leads to a warning:
warning: symbol value 'm' invalid for CPU_FREQ_GOV_SCHEDUTIL
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
This enables the use of the memory/ti-aemif.c driver.
ATM most davinci boards use the mach-davinci aemif code which gets in
the way of genericity and proper DT boot.
Signed-off-by: Karl Beldan <kbeldan@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Systemd already supports seccomp. It seems some distros are building
systemd with seccomp, e.g. Arch on ARM, thus leading to boot errors:
systemd-logind.service: Failed at step SECCOMP spawning /usr/lib/systemd/systemd-logind: Invalid argument
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Systemd already supports seccomp. It seems some distros are building
systemd with seccomp, e.g. Arch on ARM, thus leading to boot errors:
systemd-logind.service: Failed at step SECCOMP spawning /usr/lib/systemd/systemd-logind: Invalid argument
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Add MPL3115 NXP pressure sensor configuration.
This sensor is used by warp7 board.
Signed-off-by: Breno Lima <breno.lima@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Select CONFIG_DRM_ETNAVIV, so that GPU support can be enabled by default.
Generated by manually selecting CONFIG_DRM_ETNAVIV and
then running:
make savedefconfig
cp defconfig arch/arm/configs/imx_v6_v7_defconfig
,which results in additional cleanup.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Option is long gone, see
5d9efa7ee9 ("ipv6: Remove privacy config option.")
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
PM_DEBUG and PM_ADVANCED_DEBUG bring some information useful for
development and they should not cause any significant overhead. Enable
them in default configuration so debugging would be slightly easier.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Acked-by: Kukjin Kim <kgene@kernel.org>
This patch enables the bus frequency scaling driver with devfreq and
devfreq-event framework. Devfreq is already supported on Odroid U3/XU3,
Trats2 and Rinato/Monk boards.
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
[k.kozlowski: Don't enable symbols already selected, adjust commit msg]
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
This patch moves SOC_IMX1 into 'Device tree only' category and renames
imx1-dt.c to mach-imx1.c to align with the name schema of other
i.MX DT only platforms.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Synertronixx SCB9328 board is very similar to Armadeus APF9328,
so it can be easily reimplemented in DT way.
This patch removes support for non-DT support for this board.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
mach-apf9328.c can be replaced with devicetree equivalent: imx1-apf9328.dts,
so remove the board file.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
- USB test module
- USB gadget functions using configfs which are just ready within
several release cycles.
- USB audio gadget
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The LCDK embeds a LAN8710.
Cc: Sekhar Nori <nsekhar@ti.com>
Cc: Kevin Hilman <khilman@baylibre.com>
Acked-by: Kevin Hilman <khilman@baylibre.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Karl Beldan <kbeldan@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
This driver handles the RTC of most davinci SoCs.
Cc: Sekhar Nori <nsekhar@ti.com>
Cc: Kevin Hilman <khilman@baylibre.com>
Acked-by: Kevin Hilman <khilman@baylibre.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Karl Beldan <kbeldan@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
This patch disables deprecated IDE subsystem in trizeps4_defconfig
(ide-cs host driver is selected in this config but pata_pcmcia
libata PATA host driver is also selected so ide-cs is redundant
and can be disabled together with the whole IDE subsystem).
Cc: Daniel Mack <daniel@zonque.org>
Cc: Haojian Zhuang <haojian.zhuang@gmail.com>
Cc: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
This patch disables deprecated IDE subsystem in pxa255-idp_defconfig
(no IDE host drivers are selected in this config so there is no valid
reason to enable IDE subsystem itself).
Cc: Daniel Mack <daniel@zonque.org>
Cc: Haojian Zhuang <haojian.zhuang@gmail.com>
Cc: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
This patch disables deprecated IDE subsystem in lpd270_defconfig
(no IDE host drivers are selected in this config so there is no
valid reason to enable IDE subsystem itself).
Cc: Daniel Mack <daniel@zonque.org>
Cc: Haojian Zhuang <haojian.zhuang@gmail.com>
Cc: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
This patch disables deprecated IDE subsystem in colibri_pxa270_defconfig
(no IDE host drivers are selected in this config so there is no valid
reason to enable IDE subsystem itself).
Cc: Daniel Mack <daniel@zonque.org>
Cc: Haojian Zhuang <haojian.zhuang@gmail.com>
Cc: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
If both legacy and device-tree machines are mixed in the same defconfig,
the legacy boards don't boot up anymore with gpio request deferral
errors.
This is seen when attempting to run akita, borzoi, spitz, terrier, or
tosa in qemu with pxa_defconfig.
The real reason behind is that gpio handling for pxa in its current
state cannot be built for _both_ a devicetree machine (ie. pxa-dt.c) and
a non devicetree machine (ie. corgi, tosa, ...).
This is turn is because for devicetree a pinctrl is enforced for the
machine, and a pinctrl driver is required. If it's not available,
pxa_gpio_request() fails on pinctrl_request_gpio() and returns
-EPROBE_DEFER. It was introduced by commit f806dac593
("ARM: pxa: activate pinctrl for device-tree machines").
Now the true chicken and egg problem is than machine files,
ie. arch/arm/mach-pxa/xxx.c are using gpio before the drivers are
probed, in the init_machine() function, and that's why pinctrl/gpio for
legacy machine files is a bit difficult.
As for now, to keep the compilation coverage and testing of legacy
machines, this patch removes the 2 devicetree machines from
pxa_defconfig.
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Tested-by: Guenter Roeck <linux@roeck-us.net>
The Wandboard Quad can make use of the cpufreq support provided by the
driver. Enable it and its dependency, REGULATOR_ANATOP, by default.
Signed-off-by: Tuomas Tynkkynen <tuomas@tuxera.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The Wandboard Quad comes with a SATA port. Enable the IMX SATA driver by
default to make it easy to have the root filesystem on it.
Signed-off-by: Tuomas Tynkkynen <tuomas@tuxera.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
UBIFS is commonly used on Marvell EBU v7 platforms to store the root
file-system, so it makes sense to have those options enabled by default
in mvebu_v7_defconfig.
Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>
Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Marvell EBU v7 platforms contain various MTD devices, therefore it makes
sense to allow configuring the MTD partition tables via the kernel command
line.
Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>
Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Build audio support for DA850-based devices as modules in the default
defconfig.
Cc: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
It's been awhile since a cleanup was done. Regenerate the default settings by
$ make davinci_all_config
$ make savedefconfig
$ cp defconfig arch/arm/configs/davinci_all_defconfig
Cc: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
The patch that this was preparing for made it into neither v4.7 nor
v4.8, so we should back this out as well to avoid the opposite
warning:
arch/arm/configs/aspeed_g5_defconfig:62:warning: symbol value '1' invalid for PRINTK_TIME
arch/arm/configs/aspeed_g4_defconfig:61:warning: symbol value '1' invalid for PRINTK_TIME
Sorry for not catching this earlier.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 0ef659a300 ("ARM: aspeed: adapt defconfigs for new CONFIG_PRINTK_TIME")
Cc: stable@vger.kernel.org # v4.7
Defconfig additions, removals, etc. Most of these are small changes adding
the options for newly upstreamed drivers, or drivers needed for new board
support.
- Removed Broadcom bcm_defconfig, targets are all covered in multi_v7_defconfig
- New defconfig: multi_v4t_defconfig
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=jRHp
-----END PGP SIGNATURE-----
Merge tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC defconfig updates from Olof Johansson:
"Defconfig additions, removals, etc.
Most of these are small changes adding the options for newly
upstreamed drivers, or drivers needed for new board support.
- removed Broadcom bcm_defconfig, targets are all covered in
multi_v7_defconfig
- new defconfig: multi_v4t_defconfig"
* tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (43 commits)
ARM: multi_v7_defconfig: enable STMicroelectronics DRM Support
ARM: multi_v7_defconfig: enable STMicroelectronics BDISP 2D blitter driver
ARM: omap2plus_defconfig: Fix USB selection to keep Ethernet working
ARM: configs: lpc18xx: enable adc and dac iio drivers
ARM: config: Add a multi_v4t_defconfig
ARM: multi_v7_defconfig: add ACT8945A
ARM: at91/defconfig: Add ACT8945A driver
ARM: imx_v6_v7_defconfig: Select ADS7846 support
ARM: configs: qualcomm: Add MDM9615 missing defconfigs
ARM: multi_v7_defconfig: Enable vivid driver as a module
ARM: exynos_defconfig: Enable vivid driver as a module
ARM: defconfig: enable the MSM8660 pin controller
ARM: imx_v6_v7_defconfig: enable USB FFS gadget
ARM: socfpga: enable PL330 DMA in socfpga_defconfig
ARM: socfpga: add PCIe to socfpga_defconfig
ARM: multi_v7_defconfig: defconfig: Enable r8a7792 SoC
ARM: shmobile: defconfig: Enable r8a7792 SoC
ARM: Remove bcm_defconfig
ARM: multi_v7_defconfig: Enable Broadcom Kona watchdog
ARM: multi_v7_defconfig: Enable Broadcom STB PWM
...
Kconfig dependencies for v4.8 merge window. Otherwise things
like USB Ethernet on omap3 beagle, omap4 panda and omap5-uevm
won't work without manual configuration.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=8O1H
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v4.8/defconfig-v2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/defconfig
Merge "omap2plus_defconfig fix for v4.8 merge window" from Tony Lindgren:
A defconfig update for omap2plus_defconfig to fix changed USB
Kconfig dependencies for v4.8 merge window. Otherwise things
like USB Ethernet on omap3 beagle, omap4 panda and omap5-uevm
won't work without manual configuration.
* tag 'omap-for-v4.8/defconfig-v2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: omap2plus_defconfig: Fix USB selection to keep Ethernet working
Enable ADC and DAC IIO drivers for LPC18xx/43xx SoCs.
Signed-off-by: Joachim Eastwood <manabian@gmail.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Two patches to enable the DRM driver in the sunxi and multi_v7 defconfig.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=CrDC
-----END PGP SIGNATURE-----
Merge tag 'sunxi-defconfig-for-4.8' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into next/defconfig
Merge "Allwinner defconfig changes for 4.8" from Maxime Ripard:
Two patches to enable the DRM driver in the sunxi and multi_v7 defconfig.
* tag 'sunxi-defconfig-for-4.8' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux:
ARM: sunxi: Enable sun4i DRM driver
ARM: multi_v7: Enable sun4i DRM driver
* Enable newly added support for r8a7792 SoC in multi_v7 and shmobile
defconfigs
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=f6TZ
-----END PGP SIGNATURE-----
Merge tag 'renesas-defconfig-for-v4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/defconfig
Renesas ARM Based SoC Defconfig Updates for v4.8
* Enable newly added support for r8a7792 SoC in multi_v7 and shmobile
defconfigs
* tag 'renesas-defconfig-for-v4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: multi_v7_defconfig: defconfig: Enable r8a7792 SoC
ARM: shmobile: defconfig: Enable r8a7792 SoC
Signed-off-by: Olof Johansson <olof@lixom.net>
To allow regression build testing of multi v4t systems, add a
multi_v4t_defconfig, similar to the multi_v5(v7)_defconfig.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
1. Enable Virtual Video Test Driver on nulti_v7 and exynos defconfigs.
Useful for testing.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=9A1f
-----END PGP SIGNATURE-----
Merge tag 'samsung-defconfig-4.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/defconfig
Samsung defconfig update for v4.8, part 2:
1. Enable Virtual Video Test Driver on nulti_v7 and exynos defconfigs.
Useful for testing.
* tag 'samsung-defconfig-4.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: multi_v7_defconfig: Enable vivid driver as a module
ARM: exynos_defconfig: Enable vivid driver as a module
Signed-off-by: Olof Johansson <olof@lixom.net>
- Enable TOUCHSCREEN_ADS7846, USB_FUNCTIONFS and USB_USBNET support
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJXcm6FAAoJEFBXWFqHsHzOdFEH/jF1mfZbRBYDjkLsg6H++MJ1
q/Yd8GTahIgIQyjAglBbiF5nLnLD6OK03HPu4M5H7fBo/tS6Og5Tk8LshwXzEucZ
eAC6/5iDRlY1AgdFrdxhXqGwVyG04dgK553PQijCR5GSZ9MMhQO9JFJ49Lf64FuV
TqZ0VPDUO7fw0qlE7yqd1JWy1SHa5LthRxUpx8gJUk+6nqJVQO26Ciga1BP6uSsB
5nprCGpWo00Hfn6hMHqWXCyOm4vaWPq+N2E9aHFdo6VNnAIZxbqvYJ3RpfDu1UfV
PoCoRVaNSfqEIr5yaliMykXI96U8gbLfoWXf/E4K08/Z9uB0gyIqbXCmvHoMhC0=
=EWUm
-----END PGP SIGNATURE-----
Merge tag 'imx-defconfig-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/defconfig
The i.MX defconfig update for 4.8:
- Enable TOUCHSCREEN_ADS7846, USB_FUNCTIONFS and USB_USBNET support
* tag 'imx-defconfig-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: imx_v6_v7_defconfig: Select ADS7846 support
ARM: imx_v6_v7_defconfig: enable USB FFS gadget
ARM: imx_v6_v7_defconfig: build in usbnet to support NFS for non-ethernet board
Signed-off-by: Olof Johansson <olof@lixom.net>
ACT8945A is the PMIC present on the sama5d2 Xplained.
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Include ACT8945A mfd, regulator and power drivers.
Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
- dts: rename 'ide-disk' to 'disk-activity'
- platform: rename 'ide-disk' to 'disk-activity'
- defconfig: rename 'LEDS_TRIGGER_IDE_DISK' to 'LEDS_TRIGGER_DISK'
Signed-off-by: Stephan Linz <linz@li-pro.net>
Acked-by: Sekhar Nori <nsekhar@ti.com>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
The Virtual Video Test Driver can be used to emulate video capture and
output devices so it's very useful for testing. Since is not necessary
to boot, can be enabled as module to avoid increasing the kernel size.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
The Virtual Video Test Driver can be used to emulate video capture and
output devices so it's very useful for testing. Since is not necessary
to boot, can be enabled as module to avoid increasing the kernel size.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
After enabling this I get pins, GPIO, keys and everything on
the MSM8660 surf (APQ8660 DragonBoard).
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Enable the PL330 DMA and DMATEST on SoCFPGA.
make savedefconfig says CONFIG_FHANDLE is not needed in the defconfig,
remove it.
Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
---
v2: Also enable DMATEST as a kernel module
- Florian enables support for the BCM63xx DSL SoCs basic peripherals, enables
the networking subsystems for Set Top Box SoCs, enables the PWM, watchdog and
the AHCI controller and SATA PHY drivers
- Florian removes the bcm_defconfig file which is no longer useful and updates
multi_v7_defconfig to include the Kona watchdog to provide proper reboot for the
Broadcom Kona platforms
Please note that Tejun Heo has queued a patch which renames AHCI_BRCMSTB into
AHCI_BRCM, to avoid two patches in a row, we just enable AHCI_BRCM to be future
proof
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJXY1BGAAoJEIfQlpxEBwcEkkgQAITurehP8Wbt0aBSt42OUmCP
xvBTuecYkDeoZCTAT3QxfLt2f6aXHWxhl1c4nbnEF3bHqSvwDN1d4QjORC2vNN/j
4pfLXwRN2wpWk40j7ee3rrJVM2iYyHyfa1qY3cBUD11rtBFWTX0DTvevbG9jUvsL
dqfV51QHXAbod0L7QZKAmBmjQsjpBjDOfdrxULad0wJcOpIImDc1ynKV1PPd5hOw
SFTyQe2rtNmhoIiLThwA694upfxPxguz6SlWZo503n6vMoF5U/z51EGne9scTTxi
kjATpQAuYWakN3qD1AeT8oHm4/Mq5vMLqvjyRLrxlDCkrQp4UliLPEzwGIhB0BU+
sBcmWhLieuYaR09in46wkuBbiWXGR6vh5TkN2MIlV61Y6Q99YUumTUiDO8d3fKus
DqdPXACxpM9FoP4I/HniOMdl4FXInBqq3Ec/rBCb5fbsyxbO+FgxRBZkvZmoTouO
6ZRIx/opi1GzW8te1hZvdzzL9uJaWFDXwnpehhQk9xlYz66R2u06lWsDsLt45DnE
5vujTQcst6PtmqrKwehkqPDIgYRIuU1T66wPzIeMQyiF3yD/cpx+8b5j/lye8Kh+
TaZTeCh4susttrVjhee68asFAnXpNSpwm61tNVIiypFhvrvPCLKOL0YETo/wwIJt
AgJ92oi9NxNT4LDVdeni
=vr6G
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-4.8/defconfig' of http://github.com/Broadcom/stblinux into next/defconfig
This pull request contains defconfig changes for Broadcom ARM-based SoCs:
- Florian enables support for the BCM63xx DSL SoCs basic peripherals, enables
the networking subsystems for Set Top Box SoCs, enables the PWM, watchdog and
the AHCI controller and SATA PHY drivers
- Florian removes the bcm_defconfig file which is no longer useful and updates
multi_v7_defconfig to include the Kona watchdog to provide proper reboot for the
Broadcom Kona platforms
Please note that Tejun Heo has queued a patch which renames AHCI_BRCMSTB into
AHCI_BRCM, to avoid two patches in a row, we just enable AHCI_BRCM to be future
proof
* tag 'arm-soc/for-4.8/defconfig' of http://github.com/Broadcom/stblinux:
ARM: Remove bcm_defconfig
ARM: multi_v7_defconfig: Enable Broadcom Kona watchdog
ARM: multi_v7_defconfig: Enable Broadcom STB PWM
ARM: multi_v7_defconfig: Enable BCM7038 Watchdog
ARM: multi_v7_defconfig: Enable Broadcom AHCI
ARM: multi_v7_defconfig: Enable BRCMSTB networking
ARM: multi_v7_defconfig: Enable BCM63xx
Signed-off-by: Olof Johansson <olof@lixom.net>
We have everything we need in multi_v7_defconfig that exists in
bcm_defconfig, so get rid of that file to reduce the maintenance burden.
Acked-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
In order to get rid of bcm_defconfig, enable this driver which is needed
by some Broadcom SoCs based on the Kona architecture to reboot.
Acked-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
The BCM7038 watchdog is used by all Broadcom STB SoCs but is not needed
for system reboot, we just turn it on as a module.
Acked-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Enable the Broadcom AHCI driver and its companion PHY driver to get
functional SATA3 support.
Acked-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
At some boards, it has no ethernet support. As an alternative, we can use
USB Ethernet card to support NFS (u-boot supports it too). It supports
AXIS cards which are used most frequently.
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Enable the following bits:
CONFIG_TOUCHSCREEN_STMPE
- STMPE touchscreen support, needed on MCVEVK as it contains the
chip. This also enables the STMPE MFD device and touchscreen
input support.
CONFIG_USB_STORAGE
- USB storage support is often used, so enable it.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
Newer Keystone 2 devices utilize pinmuxing. Enable PINCTRL SINGLE
which is used to handle pinmuxing.
Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
The Exynos SoC provides a Security SubSystem block for accelerating some
cryptographic operations. Enable the driver for it - s5p-secss to
utilize the hardware acceleration.
Currently the s5p-secss driver supports AES in CBC and ECB modes.
However its usefulness could be doubted. Excerpt of tests on Odroid XU3
(Exynos5422), for 256 bit key, encryption, performance CPU freq governor:
algorithm | block size [b] | average speed [MB/s] |
cbc-aes-s5p | 16 | 11.5 |
cbc-aes-s5p | 64 | 25.4 |
cbc-aes-s5p | 256 | 41.0 |
cbc-aes-s5p | 1024 | 47.4 |
cbc-aes-s5p | 8192 | 49.0 |
cbc(aes-generic) | 16 | 0.4 |
cbc(aes-generic) | 64 | 1.8 |
cbc(aes-generic) | 256 | 6.6 |
cbc(aes-generic) | 1024 | 25.2 |
cbc(aes-generic) | 8192 | 83.1 |
Anyway enable the driver so it will get some testing coverage by
community.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
The Exynos4412-based Trats2 board has CM36651 proximity/ambient light
sensor, MMS114 touchscreen and Wolfson Microelectronics WM1811 CODEC.
Enable them in defconfig to get some testing coverage and use its
features.
While saving defconfig the SND_SOC_ODROIDX2 is removed because it does
not exist since commit ee12a817bb ("ASoC: samsung: Remove unused
Odroid x2/u3 machine driver").
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
1. Fix samsung-keypad build error if INPUT is selected as module.
The error though depends on some uncommon build settings so it
is not as easy to trigger.
2. Get rid of 'samsung_device_dma_mask' defined but not used warning.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=LR9t
-----END PGP SIGNATURE-----
Merge tag 'samsung-fixes-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into fixes
Two fixes for v4.7 cycle for build issues:
1. Fix samsung-keypad build error if INPUT is selected as module.
The error though depends on some uncommon build settings so it
is not as easy to trigger.
2. Get rid of 'samsung_device_dma_mask' defined but not used warning.
* tag 'samsung-fixes-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: exynos: don't select keyboard driver
ARM: samsung: improve static dma_mask definition
Signed-off-by: Olof Johansson <olof@lixom.net>
Enable the required drivers and subsystems to bring-up networking on
Broadcom's Set-top Box SoCs: BCMGENET and SF2. These two drivers both
have proper dependencies on their internal PHY and MDIO drivers.
Acked-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Enable ARCH_BCM_63XX to build ARM-specific boot and SMP code, as well as
the serial console driver for this platform.
Acked-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
The driver can be built as a module, so use this possibility.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Exynos SoCs have a Multi Format Video Hardware Codec (MFC) IP block that
can be used to {en,de}code video streams by hardware. Enable support for
its driver as a module so the MFC can be tested.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Exynos SoCs have a Multi Format Video Hardware Codec (MFC) IP block that
can be used to {en,de}code video streams by hardware. Enable support for
its driver as a module so the MFC can be tested.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
There are a bunch of media platform drivers under drivers/media/platform/
for Samsung SoCs that are enabled in exynos_defconfig but no in multi_v7.
This patch enables them as a module to improve build coverage for these
drivers and also to allow people use them with proper hardware if modules
are installed.
Suggested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
There are a bunch of media platform drivers under drivers/media/platform/
that are for Samsung SoCs but are not being built with exynos_defconfig.
This patch enables them as a module to improve build coverage for these
drivers and also to allow people use them with proper hardware if modules
are installed. The S5P MFC driver wasn't enabled since it fails to probe.
Only the boolean Kconfig symbols are enabled as built-in, since drivers
are not critical and also to keep the kernel binary image size as small
as possible.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Mixer driver is selected by CONFIG_DRM_EXYNOS_HDMI option. Since Exynos5433
HDMI does not require Mixer and there are separate options to select Mixer
and HDMI.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Enable the new DRM driver in the sunxi default configuration
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Enable the new DRM driver in the multi_v7 defconfig
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Disable big.LITTLE switcher in order to allow automatic usage of
cpufreq-dt driver on Exynos542x/Exynos5800 SoCs based boards.
This change should not cause any problems as arm_big_little[_dt]
driver (which is using big.LITTLE switcher support to do the "real"
big.LITTLE switching work) is not used on any Exynos SoC based
board currently.
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Tested-by: Markus Reichl <m.reichl@fivetechno.de>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Tested-by: Javier Martinez Canillas <javier@osg.samsung.com>
Reviewed-by: Anand Moon <linux.amoon@gmail.com>
Tested-by: Anand Moon <linux.amoon@gmail.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
This option was replaced by PAGE_COUNTER which is selected by MEMCG.
Signed-off-by: Konstantin Khlebnikov <koct9i@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
As usual, a bunch of commits, mostly adding drivers and other options to
defconfigs.
We are adding three new defconfig files for the newly added 32-bit
machines (aspeed and mps2), the rest is mainly housekeeping.
The changes outside of arch/arm/config/ are for a Kconfig symbol
that got renamed.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=ecJp
-----END PGP SIGNATURE-----
Merge tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC defconfig updates from Arnd Bergmann:
"As usual, a bunch of commits, mostly adding drivers and other options
to defconfigs.
We are adding three new defconfig files for the newly added 32-bit
machines (aspeed and mps2), the rest is mainly housekeeping.
The changes outside of arch/arm/config/ are for a Kconfig symbol that
got renamed"
* tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (63 commits)
ARM: aspeed: adapt defconfigs for new CONFIG_PRINTK_TIME
ARM: u8500_defconfig: update sensor config
ARM: u8500_defconfig: remove staging from defconfig
ARM: multi_v7_defconfig: Remove unused Kconfig option MACH_UX500_DT
ARM: at91/defconfig: sama5: add CONFIG_FHANDLE
arm/configs: Add Aspeed defconfig
arm/configs/multi_v5: Add Aspeed ast2400
ARM: at91: sama5: Update defconfig
ARM: imx_v6_v7_defconfig: add CONFIG_MICREL_PHY
ARM: imx_v6_v7_defconfig: add CONFIG_I2C_GPIO
ARM: multi_v7: Enable Tegra XUSB controller in defconfig
ARM: tegra: Enable XUSB controller in defconfig
ARM: omap2plus_defconfig: Enable PWM and ir-rx51 as loadable modules
ARM: multi_v7_defconfig: add the Atmel sama5d2-compatible ADC driver
ARM: multi_v7_defconfig: add the Atmel Audio microphone interface PDMIC
ARM: multi_v7_defconfig: add Atmel ISI (Image Sensor Interface) driver
ARM: multi_v7_defconfig: add Atmel watchdog timers
ARM: multi_v7_defconfig: add HLCDC drivers as modules
ARM: at91/defconfig: add PDMIC driver to sama5_defconfig
ARM: at91/defconfig: add HLCDC driver to sama5_defconfig
...
The samsung-keypad driver is implicitly selected by ARCH_EXYNOS4 (why?),
but this fails if CONFIG_INPUT is a loadable module:
drivers/input/built-in.o: In function `samsung_keypad_remove':
drivers/input/keyboard/samsung-keypad.c:461: undefined reference to `input_unregister_device'
drivers/input/built-in.o: In function `samsung_keypad_irq':
drivers/input/keyboard/samsung-keypad.c:137: undefined reference to `input_event'
drivers/input/built-in.o: In function `samsung_keypad_irq':
include/linux/input.h:389: undefined reference to `input_event'
drivers/input/built-in.o: In function `samsung_keypad_probe':
drivers/input/keyboard/samsung-keypad.c:358: undefined reference to `devm_input_allocate_device'
drivers/input/built-in.o:(.debug_addr+0x34): undefined reference to `input_set_capability'
This removes the 'select' as suggested by Krzysztof Kozlowski and
instead enables the driver from the defconfig files.
The problem does not happen on mainline kernels, as we don't normally
build built-in input drivers when CONFIG_INPUT=m, but I am experimenting
with a patch to change this, and the samsung keypad driver showed up
as one example that was silently broken before.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lkml.org/lkml/2016/2/14/55
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Commit 94ea9c7a579f ("lib, switch CONFIG_PRINTK_TIME to int") changes
the type of CONFIG_PRINTK_TIME and adapts all existing defconfig files,
while we add two new defconfig files with d0bc3483da ("arm/configs:
Add Aspeed defconfig"), with the old type.
This changes the two new defconfig files to match the other ones.
As a result, we get harmless warnings for the arm-soc defconfig
branch by itself, but everything will work when 4.7-rc1 is out.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=tb2f
-----END PGP SIGNATURE-----
Merge tag 'aspeed-for-4.7-defconfig' of https://github.com/shenki/linux into next/defconfig
Merge "aspeed defconfig for 4.7" from Joel Stanley:
This adds configurations used for testing Aspeed BMC SoCs, as well as adding
the v5 part to the multi defconfig.
* tag 'aspeed-for-4.7-defconfig' of https://github.com/shenki/linux:
arm/configs: Add Aspeed defconfig
arm/configs/multi_v5: Add Aspeed ast2400
The Ux500 is using buffered IIO as the sensors support
IRQs. The BH1780 ambient light sensor was added to IIO,
so disable the old misc driver and activate the driver
in IIO.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Ux500 was enabling the staging drivers due to the RMI4
touchscreen driver, this is now properly upstream, so drop
this and the dead symbol for the old RMI4 hack from
the defconfig.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Merge "i.MX defconfig updates for 4.7" from Shawn Guo:
- Update multi_v5_defconfig for i.MX21/27 and systemd support
- Update imx_v6_v7_defconfig to support devices found on various i.MX6
board: FT5x06 and TSC2004 touch, I2C GPIO, MICREL PHY and M41T80 RTC
* tag 'imx-defconfig-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: imx_v6_v7_defconfig: add CONFIG_MICREL_PHY
ARM: imx_v6_v7_defconfig: add CONFIG_I2C_GPIO
ARM: multi_v5_defconfig: Enable recommended options for systemd
ARM: multi_v5_defconfig: Enable support for MX21/MX27
ARM: imx_v6_v7_defconfig: add CONFIG_RTC_DRV_M41T80
ARM: imx_v6_v7_defconfig: add CONFIG_I2C_MUX_GPIO
ARM: imx_v6_v7_defconfig: add FT5x06 and TSC2004 touch support
Merge "ARM: tegra: Default configuration updates for v4.7-rc1" from Thierry Reding:
Enable the XUSB pad controller and XUSB controller drivers on the Tegra
and multi-v7 default configurations.
* tag 'tegra-for-4.7-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: multi_v7: Enable Tegra XUSB controller in defconfig
ARM: tegra: Enable XUSB controller in defconfig
based filesystems, SPI NOR and GPIO sysfs
entries.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.10 (GNU/Linux)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=ocYZ
-----END PGP SIGNATURE-----
Merge tag 'davinci-for-v4.7/defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/defconfig
Merge "DaVinci defconfig updates for v4.7" from Sekhar Nori:
Some defconfig updates to support systemd
based filesystems, SPI NOR and GPIO sysfs
entries.
* tag 'davinci-for-v4.7/defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
ARM: davinci_all_defconfig: enable SPI and NOR as modules
ARM: davinci_all_defconfig: support systemd
ARM: davinci_all_defconfig: enable GPIO_SYSFS
CONFIG_FHANDLE is listed as a mandatory kernel option for systemd. So
explicitly enable it to allow easy use of systemd userspace.
Reported-by: Marek Vasut <marex@denx.de>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Now that all drivers support the same set of functions and the same
setup code, drop every model-specific DSA switch driver and replace them
with a common mv88e6xxx driver.
This merges the info tables into one, removes the function exports, the
model-specific files, and update the defconfigs.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This adds the Aspeed ast2400 BMC SoC to the build.
The SoC has six UARTs so we need to enable the appropriate options for
SERIAL_8250
Signed-off-by: Joel Stanley <joel@jms.id.au>
Enable CGROUPS support, so we can boot userspace that uses systemd on
top of kernel configured using this defconfig. The systemd userspace
depends on cgroups and without them, it dies in mysterious ways.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Ludovic Desroches <ludovic.desroches@atmel.com>
Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
The driver for Micrel PHYs is required for the Apalis iMX6 module
plugged into a Ixora carrier board featuring an on-module Micrel
KSZ9031 Gigabit PHY.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The GPIO-based bitbanging I2C driver is required to make HDMI work on
the Apalis iMX6 module plugged into a Ixora carrier board featuring a
DDC channel to read a screen's EDID being hooked up to regular GPIOs.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Enable the XUSB pad controller and XUSB controller (implementing an XHCI
interface) in the multi_v7 default configuration.
The XUSB pad controller is built-in because it is needed by PCIe, which
in turn provides the onboard ethernet used for network boot on a Jetson
TK1.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Enable the XUSB pad controller and XUSB controller (implementing an XHCI
interface) in the Tegra default configuration.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Mostly enable drivers used on various boards as loadable modules
where possible. Also one warning fix related to RXKAD changes
heading to v4.7. And run make save_defconfig to shrink down the
size a bit.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=lX8d
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v4.7/defconfig-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/defconfig
Merge "Defconfig changes for omap2plus_defconfig for v4.7 merge window" from Tony Lindgren:
Mostly enable drivers used on various boards as loadable modules
where possible. Also one warning fix related to RXKAD changes
heading to v4.7. And run make save_defconfig to shrink down the
size a bit.
* tag 'omap-for-v4.7/defconfig-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: omap2plus_defconfig: Enable PWM and ir-rx51 as loadable modules
ARM: omap2plus_defconfig: Enable twl6030 USB phy as loadable module
ARM: omap2plus_defconfig: Fix warning due invalid RXKAD symbol value
ARM: omap2plus_defconfig: Update with make savedefconfig
ARM: omap2plus_defconfig: Enable MDIO Bus/PHY emulation support
ARM: omap2plus_defconfig: Enable DP83867 support
ARM: omap2plus_defconfig: Enable GPIO_TPIC2810
This includes savedefconfig update of lpc32xx_defconfig, which removes
a number of outdated config options, plus ARM PrimeCell PL17x memory
controller driver is enabled by default now, on LPC32xx boards the
controller is commonly used to access SDRAM and NOR.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=yp6h
-----END PGP SIGNATURE-----
Merge tag 'lpc32xx-defconfig-4.7' of git://github.com/vzapolskiy/linux-lpc32xx into next/defconfig
Merge "NXP LPC32xx defconfig updates for v4.7" from Vladimir Zapolskiy:
This includes savedefconfig update of lpc32xx_defconfig, which removes
a number of outdated config options, plus ARM PrimeCell PL17x memory
controller driver is enabled by default now, on LPC32xx boards the
controller is commonly used to access SDRAM and NOR.
* tag 'lpc32xx-defconfig-4.7' of git://github.com/vzapolskiy/linux-lpc32xx:
ARM: LPC32xx: add PL175 memory controller driver to defconfig
ARM: LPC32xx: defconfig update
Add the Atmel Pulse Density Modulation Interface Controller (PDMIC) driver
as a module. It's used by sama5d2 SoC for instance.
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
