mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-27 14:43:58 +08:00
9c23f84723
37148 Commits
Author | SHA1 | Message | Date | |
---|---|---|---|---|
Linus Torvalds
|
b71acb0e37 |
Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu: "API: - Add 1472-byte test to tcrypt for IPsec - Reintroduced crypto stats interface with numerous changes - Support incremental algorithm dumps Algorithms: - Add xchacha12/20 - Add nhpoly1305 - Add adiantum - Add streebog hash - Mark cts(cbc(aes)) as FIPS allowed Drivers: - Improve performance of arm64/chacha20 - Improve performance of x86/chacha20 - Add NEON-accelerated nhpoly1305 - Add SSE2 accelerated nhpoly1305 - Add AVX2 accelerated nhpoly1305 - Add support for 192/256-bit keys in gcmaes AVX - Add SG support in gcmaes AVX - ESN for inline IPsec tx in chcr - Add support for CryptoCell 703 in ccree - Add support for CryptoCell 713 in ccree - Add SM4 support in ccree - Add SM3 support in ccree - Add support for chacha20 in caam/qi2 - Add support for chacha20 + poly1305 in caam/jr - Add support for chacha20 + poly1305 in caam/qi2 - Add AEAD cipher support in cavium/nitrox" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (130 commits) crypto: skcipher - remove remnants of internal IV generators crypto: cavium/nitrox - Fix build with !CONFIG_DEBUG_FS crypto: salsa20-generic - don't unnecessarily use atomic walk crypto: skcipher - add might_sleep() to skcipher_walk_virt() crypto: x86/chacha - avoid sleeping under kernel_fpu_begin() crypto: cavium/nitrox - Added AEAD cipher support crypto: mxc-scc - fix build warnings on ARM64 crypto: api - document missing stats member crypto: user - remove unused dump functions crypto: chelsio - Fix wrong error counter increments crypto: chelsio - Reset counters on cxgb4 Detach crypto: chelsio - Handle PCI shutdown event crypto: chelsio - cleanup:send addr as value in function argument crypto: chelsio - Use same value for both channel in single WR crypto: chelsio - Swap location of AAD and IV sent in WR crypto: chelsio - remove set but not used variable 'kctx_len' crypto: ux500 - Use proper enum in hash_set_dma_transfer crypto: ux500 - Use proper enum in cryp_set_dma_transfer crypto: aesni - Add scatter/gather avx stubs, and use them in C crypto: aesni - Introduce partial block macro .. |
||
Linus Torvalds
|
e0c38a4d1f |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller: 1) New ipset extensions for matching on destination MAC addresses, from Stefano Brivio. 2) Add ipv4 ttl and tos, plus ipv6 flow label and hop limit offloads to nfp driver. From Stefano Brivio. 3) Implement GRO for plain UDP sockets, from Paolo Abeni. 4) Lots of work from Michał Mirosław to eliminate the VLAN_TAG_PRESENT bit so that we could support the entire vlan_tci value. 5) Rework the IPSEC policy lookups to better optimize more usecases, from Florian Westphal. 6) Infrastructure changes eliminating direct manipulation of SKB lists wherever possible, and to always use the appropriate SKB list helpers. This work is still ongoing... 7) Lots of PHY driver and state machine improvements and simplifications, from Heiner Kallweit. 8) Various TSO deferral refinements, from Eric Dumazet. 9) Add ntuple filter support to aquantia driver, from Dmitry Bogdanov. 10) Batch dropping of XDP packets in tuntap, from Jason Wang. 11) Lots of cleanups and improvements to the r8169 driver from Heiner Kallweit, including support for ->xmit_more. This driver has been getting some much needed love since he started working on it. 12) Lots of new forwarding selftests from Petr Machata. 13) Enable VXLAN learning in mlxsw driver, from Ido Schimmel. 14) Packed ring support for virtio, from Tiwei Bie. 15) Add new Aquantia AQtion USB driver, from Dmitry Bezrukov. 16) Add XDP support to dpaa2-eth driver, from Ioana Ciocoi Radulescu. 17) Implement coalescing on TCP backlog queue, from Eric Dumazet. 18) Implement carrier change in tun driver, from Nicolas Dichtel. 19) Support msg_zerocopy in UDP, from Willem de Bruijn. 20) Significantly improve garbage collection of neighbor objects when the table has many PERMANENT entries, from David Ahern. 21) Remove egdev usage from nfp and mlx5, and remove the facility completely from the tree as it no longer has any users. From Oz Shlomo and others. 22) Add a NETDEV_PRE_CHANGEADDR so that drivers can veto the change and therefore abort the operation before the commit phase (which is the NETDEV_CHANGEADDR event). From Petr Machata. 23) Add indirect call wrappers to avoid retpoline overhead, and use them in the GRO code paths. From Paolo Abeni. 24) Add support for netlink FDB get operations, from Roopa Prabhu. 25) Support bloom filter in mlxsw driver, from Nir Dotan. 26) Add SKB extension infrastructure. This consolidates the handling of the auxiliary SKB data used by IPSEC and bridge netfilter, and is designed to support the needs to MPTCP which could be integrated in the future. 27) Lots of XDP TX optimizations in mlx5 from Tariq Toukan. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1845 commits) net: dccp: fix kernel crash on module load drivers/net: appletalk/cops: remove redundant if statement and mask bnx2x: Fix NULL pointer dereference in bnx2x_del_all_vlans() on some hw net/net_namespace: Check the return value of register_pernet_subsys() net/netlink_compat: Fix a missing check of nla_parse_nested ieee802154: lowpan_header_create check must check daddr net/mlx4_core: drop useless LIST_HEAD mlxsw: spectrum: drop useless LIST_HEAD net/mlx5e: drop useless LIST_HEAD iptunnel: Set tun_flags in the iptunnel_metadata_reply from src net/mlx5e: fix semicolon.cocci warnings staging: octeon: fix build failure with XFRM enabled net: Revert recent Spectre-v1 patches. can: af_can: Fix Spectre v1 vulnerability packet: validate address length if non-zero nfc: af_nfc: Fix Spectre v1 vulnerability phonet: af_phonet: Fix Spectre v1 vulnerability net: core: Fix Spectre v1 vulnerability net: minor cleanup in skb_ext_add() net: drop the unused helper skb_ext_get() ... |
||
Linus Torvalds
|
fb2a624d5f |
selinux/stable-4.21 PR 20181224
-----BEGIN PGP SIGNATURE----- iQJIBAABCAAyFiEES0KozwfymdVUl37v6iDy2pc3iXMFAlwhAjMUHHBhdWxAcGF1 bC1tb29yZS5jb20ACgkQ6iDy2pc3iXPF3RAAkM8wRBk3PoH68kgKsbcsE6MTyoVK tneNt/brRSG11sFhRNONE7TqfM+yM68BqsTRDL1Jn36ONnfL9VB49myHyDBR4jqj FSvvi58UhixwOQNyi7aQEEGg4ltenlcM3HJLPlmWr/PXDRiklBgfzobkKpKr7QWR NdME4/u2OTO+BWbIJZ1+d8kJoSsYPiPIQLRS85kpZ/bgl0Y92QYRJoWUNfmq9/Og al91gVCSqAy6LmWLD0ddrc8xH7YDG8T/ngBHNIUb04FPHlxwJgX8BKQA7nABKntL e+wy40FpuqAuZBMbOj6/NX5gHF12fMSq1oZx41OEmL0JqqzLDuBNKlN7IWMXgZEJ 96HcFRzJWydxmf645GnMR3qsHcSvLhNGGCOXiX3NdhEsO3tJ2sJs5Jz/Af7pN9f+ Jk8ihOqOf9jd6jIW74Iev92RPOnh8aau20tueOaA/sS6t4ByyNRxFodi82x3htNg IN0z6DGBIa/aEMjfLRN5Ihj0I7Y184fWW/mGfPTZnnjifjhTWacbHKa3b4BtfsA/ ZXp/QWBhY3fGNy3+rd3j1u3ZGz/4kfoGZUIlT0LssXpnQzP2H0T74CSbIbQj1Dgf rZq34A3wndYI1AZwo/0I/sd0lwW538peQ9zPe88gZhh02IwNEjVRzoA+a1oLVywQ 3vIyeD++NrB6HGM= =uWQk -----END PGP SIGNATURE----- Merge tag 'selinux-pr-20181224' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux Pull selinux patches from Paul Moore: "I already used my best holiday pull request lines in the audit pull request, so this one is going to be a bit more boring, sorry about that. To make up for this, we do have a birthday of sorts to celebrate: SELinux turns 18 years old this December. Perhaps not the most exciting thing in the world for most people, but I think it's safe to say that anyone reading this email doesn't exactly fall into the "most people" category. Back to business and the pull request itself: Ondrej has five patches in this pull request and I lump them into three categories: one patch to always allow submounts (using similar logic to elsewhere in the kernel), one to fix some issues with the SELinux policydb, and the others to cleanup and improve the SELinux sidtab. The other patches from Alexey and Petr and trivial fixes that are adequately described in their respective subject lines. With this last pull request of the year, I want to thank everyone who has contributed patches, testing, and reviews to the SELinux project this year, and the past 18 years. Like any good open source effort, SELinux is only as good as the community which supports it, and I'm very happy that we have the community we do - thank you all!" * tag 'selinux-pr-20181224' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux: selinux: overhaul sidtab to fix bug and improve performance selinux: use separate table for initial SID lookup selinux: make "selinux_policycap_names[]" const char * selinux: always allow mounting submounts selinux: refactor sidtab conversion Documentation: Update SELinux reference policy URL selinux: policydb - fix byte order and alignment issues |
||
Linus Torvalds
|
8d6973327e |
powerpc updates for 4.21
Notable changes: - Mitigations for Spectre v2 on some Freescale (NXP) CPUs. - A large series adding support for pass-through of Nvidia V100 GPUs to guests on Power9. - Another large series to enable hardware assistance for TLB table walk on MPC8xx CPUs. - Some preparatory changes to our DMA code, to make way for further cleanups from Christoph. - Several fixes for our Transactional Memory handling discovered by fuzzing the signal return path. - Support for generating our system call table(s) from a text file like other architectures. - A fix to our page fault handler so that instead of generating a WARN_ON_ONCE, user accesses of kernel addresses instead print a ratelimited and appropriately scary warning. - A cosmetic change to make our unhandled page fault messages more similar to other arches and also more compact and informative. - Freescale updates from Scott: "Highlights include elimination of legacy clock bindings use from dts files, an 83xx watchdog handler, fixes to old dts interrupt errors, and some minor cleanup." And many clean-ups, reworks and minor fixes etc. Thanks to: Alexandre Belloni, Alexey Kardashevskiy, Andrew Donnellan, Aneesh Kumar K.V, Arnd Bergmann, Benjamin Herrenschmidt, Breno Leitao, Christian Lamparter, Christophe Leroy, Christoph Hellwig, Daniel Axtens, Darren Stevens, David Gibson, Diana Craciun, Dmitry V. Levin, Firoz Khan, Geert Uytterhoeven, Greg Kurz, Gustavo Romero, Hari Bathini, Joel Stanley, Kees Cook, Madhavan Srinivasan, Mahesh Salgaonkar, Markus Elfring, Mathieu Malaterre, Michal Suchánek, Naveen N. Rao, Nick Desaulniers, Oliver O'Halloran, Paul Mackerras, Ram Pai, Ravi Bangoria, Rob Herring, Russell Currey, Sabyasachi Gupta, Sam Bobroff, Satheesh Rajendran, Scott Wood, Segher Boessenkool, Stephen Rothwell, Tang Yuantian, Thiago Jung Bauermann, Yangtao Li, Yuantian Tang, Yue Haibing. -----BEGIN PGP SIGNATURE----- iQIcBAABAgAGBQJcJLwZAAoJEFHr6jzI4aWAAv4P/jMvP52lA90i2E8G72LOVSF1 33DbE/Okib3VfmmMcXZpgpEfwIcEmJcIj86WWcLWzBfXLunehkgwh+AOfBLwqWch D08+RR9EZb7ppvGe91hvSgn4/28CWVKAxuDviSuoE1OK8lOTncu889r2+AxVFZiY f6Al9UPlB3FTJonNx8iO4r/GwrPigukjbzp1vkmJJg59LvNUrMQ1Fgf9D3cdlslH z4Ff9zS26RJy7cwZYQZI4sZXJZmeQ1DxOZ+6z6FL/nZp/O4WLgpw6C6o1+vxo1kE 9ZnO/3+zIRhoWiXd6OcOQXBv3NNCjJZlXh9HHAiL8m5ZqbmxrStQWGyKW/jjEZuK wVHxfUT19x9Qy1p+BH3XcUNMlxchYgcCbEi5yPX2p9ZDXD6ogNG7sT1+NO+FBTww ueCT5PCCB/xWOccQlBErFTMkFXFLtyPDNFK7BkV7uxbH0PQ+9guCvjWfBZti6wjD /6NK4mk7FpmCiK13Y1xjwC5OqabxLUYwtVuHYOMr5TOPh8URUPS4+0pIOdoYDM6z Ensrq1CC843h59MWADgFHSlZ78FRtZlG37JAXunjLbqGupLOvL7phC9lnwkylHga 2hWUWFeOV8HFQBP4gidZkLk64pkT9LzqHgdgIB4wUwrhc8r2mMZGdQTq5H7kOn3Q n9I48PWANvEC0PBCJ/KL =cr6s -----END PGP SIGNATURE----- Merge tag 'powerpc-4.21-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: "Notable changes: - Mitigations for Spectre v2 on some Freescale (NXP) CPUs. - A large series adding support for pass-through of Nvidia V100 GPUs to guests on Power9. - Another large series to enable hardware assistance for TLB table walk on MPC8xx CPUs. - Some preparatory changes to our DMA code, to make way for further cleanups from Christoph. - Several fixes for our Transactional Memory handling discovered by fuzzing the signal return path. - Support for generating our system call table(s) from a text file like other architectures. - A fix to our page fault handler so that instead of generating a WARN_ON_ONCE, user accesses of kernel addresses instead print a ratelimited and appropriately scary warning. - A cosmetic change to make our unhandled page fault messages more similar to other arches and also more compact and informative. - Freescale updates from Scott: "Highlights include elimination of legacy clock bindings use from dts files, an 83xx watchdog handler, fixes to old dts interrupt errors, and some minor cleanup." And many clean-ups, reworks and minor fixes etc. Thanks to: Alexandre Belloni, Alexey Kardashevskiy, Andrew Donnellan, Aneesh Kumar K.V, Arnd Bergmann, Benjamin Herrenschmidt, Breno Leitao, Christian Lamparter, Christophe Leroy, Christoph Hellwig, Daniel Axtens, Darren Stevens, David Gibson, Diana Craciun, Dmitry V. Levin, Firoz Khan, Geert Uytterhoeven, Greg Kurz, Gustavo Romero, Hari Bathini, Joel Stanley, Kees Cook, Madhavan Srinivasan, Mahesh Salgaonkar, Markus Elfring, Mathieu Malaterre, Michal Suchánek, Naveen N. Rao, Nick Desaulniers, Oliver O'Halloran, Paul Mackerras, Ram Pai, Ravi Bangoria, Rob Herring, Russell Currey, Sabyasachi Gupta, Sam Bobroff, Satheesh Rajendran, Scott Wood, Segher Boessenkool, Stephen Rothwell, Tang Yuantian, Thiago Jung Bauermann, Yangtao Li, Yuantian Tang, Yue Haibing" * tag 'powerpc-4.21-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (201 commits) Revert "powerpc/fsl_pci: simplify fsl_pci_dma_set_mask" powerpc/zImage: Also check for stdout-path powerpc: Fix HMIs on big-endian with CONFIG_RELOCATABLE=y macintosh: Use of_node_name_{eq, prefix} for node name comparisons ide: Use of_node_name_eq for node name comparisons powerpc: Use of_node_name_eq for node name comparisons powerpc/pseries/pmem: Convert to %pOFn instead of device_node.name powerpc/mm: Remove very old comment in hash-4k.h powerpc/pseries: Fix node leak in update_lmb_associativity_index() powerpc/configs/85xx: Enable CONFIG_DEBUG_KERNEL powerpc/dts/fsl: Fix dtc-flagged interrupt errors clk: qoriq: add more compatibles strings powerpc/fsl: Use new clockgen binding powerpc/83xx: handle machine check caused by watchdog timer powerpc/fsl-rio: fix spelling mistake "reserverd" -> "reserved" powerpc/fsl_pci: simplify fsl_pci_dma_set_mask arch/powerpc/fsl_rmu: Use dma_zalloc_coherent vfio_pci: Add NVIDIA GV100GL [Tesla V100 SXM2] subdriver vfio_pci: Allow regions to add own capabilities vfio_pci: Allow mapping extra regions ... |
||
Linus Torvalds
|
792bf4d871 |
Merge branch 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RCU updates from Ingo Molnar: "The biggest RCU changes in this cycle were: - Convert RCU's BUG_ON() and similar calls to WARN_ON() and similar. - Replace calls of RCU-bh and RCU-sched update-side functions to their vanilla RCU counterparts. This series is a step towards complete removal of the RCU-bh and RCU-sched update-side functions. ( Note that some of these conversions are going upstream via their respective maintainers. ) - Documentation updates, including a number of flavor-consolidation updates from Joel Fernandes. - Miscellaneous fixes. - Automate generation of the initrd filesystem used for rcutorture testing. - Convert spin_is_locked() assertions to instead use lockdep. ( Note that some of these conversions are going upstream via their respective maintainers. ) - SRCU updates, especially including a fix from Dennis Krein for a bag-on-head-class bug. - RCU torture-test updates" * 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (112 commits) rcutorture: Don't do busted forward-progress testing rcutorture: Use 100ms buckets for forward-progress callback histograms rcutorture: Recover from OOM during forward-progress tests rcutorture: Print forward-progress test age upon failure rcutorture: Print time since GP end upon forward-progress failure rcutorture: Print histogram of CB invocation at OOM time rcutorture: Print GP age upon forward-progress failure rcu: Print per-CPU callback counts for forward-progress failures rcu: Account for nocb-CPU callback counts in RCU CPU stall warnings rcutorture: Dump grace-period diagnostics upon forward-progress OOM rcutorture: Prepare for asynchronous access to rcu_fwd_startat torture: Remove unnecessary "ret" variables rcutorture: Affinity forward-progress test to avoid housekeeping CPUs rcutorture: Break up too-long rcu_torture_fwd_prog() function rcutorture: Remove cbflood facility torture: Bring any extra CPUs online during kernel startup rcutorture: Add call_rcu() flooding forward-progress tests rcutorture/formal: Replace synchronize_sched() with synchronize_rcu() tools/kernel.h: Replace synchronize_sched() with synchronize_rcu() net/decnet: Replace rcu_barrier_bh() with rcu_barrier() ... |
||
Linus Torvalds
|
a52fb43a5f |
Merge branch 'x86-cache-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cache control updates from Borislav Petkov: - The generalization of the RDT code to accommodate the addition of AMD's very similar implementation of the cache monitoring feature. This entails a subsystem move into a separate and generic arch/x86/kernel/cpu/resctrl/ directory along with adding vendor-specific initialization and feature detection helpers. Ontop of that is the unification of user-visible strings, both in the resctrl filesystem error handling and Kconfig. Provided by Babu Moger and Sherry Hurwitz. - Code simplifications and error handling improvements by Reinette Chatre. * 'x86-cache-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/resctrl: Fix rdt_find_domain() return value and checks x86/resctrl: Remove unnecessary check for cbm_validate() x86/resctrl: Use rdt_last_cmd_puts() where possible MAINTAINERS: Update resctrl filename patterns Documentation: Rename and update intel_rdt_ui.txt to resctrl_ui.txt x86/resctrl: Introduce AMD QOS feature x86/resctrl: Fixup the user-visible strings x86/resctrl: Add AMD's X86_FEATURE_MBA to the scattered CPUID features x86/resctrl: Rename the config option INTEL_RDT to RESCTRL x86/resctrl: Add vendor check for the MBA software controller x86/resctrl: Bring cbm_validate() into the resource structure x86/resctrl: Initialize the vendor-specific resource functions x86/resctrl: Move all the macros to resctrl/internal.h x86/resctrl: Re-arrange the RDT init code x86/resctrl: Rename the RDT functions and definitions x86/resctrl: Rename and move rdt files to a separate directory |
||
Linus Torvalds
|
42b00f122c |
* ARM: selftests improvements, large PUD support for HugeTLB,
single-stepping fixes, improved tracing, various timer and vGIC fixes * x86: Processor Tracing virtualization, STIBP support, some correctness fixes, refactorings and splitting of vmx.c, use the Hyper-V range TLB flush hypercall, reduce order of vcpu struct, WBNOINVD support, do not use -ftrace for __noclone functions, nested guest support for PAUSE filtering on AMD, more Hyper-V enlightenments (direct mode for synthetic timers) * PPC: nested VFIO * s390: bugfixes only this time -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.22 (GNU/Linux) iQEcBAABAgAGBQJcH0vFAAoJEL/70l94x66Dw/wH/2FZp1YOM5OgiJzgqnXyDbyf dNEfWo472MtNiLsuf+ZAfJojVIu9cv7wtBfXNzW+75XZDfh/J88geHWNSiZDm3Fe aM4MOnGG0yF3hQrRQyEHe4IFhGFNERax8Ccv+OL44md9CjYrIrsGkRD08qwb+gNh P8T/3wJEKwUcVHA/1VHEIM8MlirxNENc78p6JKd/C7zb0emjGavdIpWFUMr3SNfs CemabhJUuwOYtwjRInyx1y34FzYwW3Ejuc9a9UoZ+COahUfkuxHE8u+EQS7vLVF6 2VGVu5SA0PqgmLlGhHthxLqVgQYo+dB22cRnsLtXlUChtVAq8q9uu5sKzvqEzuE= =b4Jx -----END PGP SIGNATURE----- Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm Pull KVM updates from Paolo Bonzini: "ARM: - selftests improvements - large PUD support for HugeTLB - single-stepping fixes - improved tracing - various timer and vGIC fixes x86: - Processor Tracing virtualization - STIBP support - some correctness fixes - refactorings and splitting of vmx.c - use the Hyper-V range TLB flush hypercall - reduce order of vcpu struct - WBNOINVD support - do not use -ftrace for __noclone functions - nested guest support for PAUSE filtering on AMD - more Hyper-V enlightenments (direct mode for synthetic timers) PPC: - nested VFIO s390: - bugfixes only this time" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (171 commits) KVM: x86: Add CPUID support for new instruction WBNOINVD kvm: selftests: ucall: fix exit mmio address guessing Revert "compiler-gcc: disable -ftracer for __noclone functions" KVM: VMX: Move VM-Enter + VM-Exit handling to non-inline sub-routines KVM: VMX: Explicitly reference RCX as the vmx_vcpu pointer in asm blobs KVM: x86: Use jmp to invoke kvm_spurious_fault() from .fixup MAINTAINERS: Add arch/x86/kvm sub-directories to existing KVM/x86 entry KVM/x86: Use SVM assembly instruction mnemonics instead of .byte streams KVM/MMU: Flush tlb directly in the kvm_zap_gfn_range() KVM/MMU: Flush tlb directly in kvm_set_pte_rmapp() KVM/MMU: Move tlb flush in kvm_set_pte_rmapp() to kvm_mmu_notifier_change_pte() KVM: Make kvm_set_spte_hva() return int KVM: Replace old tlb flush function with new one to flush a specified range. KVM/MMU: Add tlb flush with range helper function KVM/VMX: Add hv tlb range flush support x86/hyper-v: Add HvFlushGuestAddressList hypercall support KVM: Add tlb_remote_flush_with_range callback in kvm_x86_ops KVM: x86: Disable Intel PT when VMXON in L1 guest KVM: x86: Set intercept for Intel PT MSRs read/write KVM: x86: Implement Intel PT MSRs read/write emulation ... |
||
Linus Torvalds
|
89261c5702 |
Here's the main MIPS pull for Linux 4.21. Core architecture changes
include: - Syscall tables & definitions for unistd.h are now generated by scripts, providing greater consistency with other architectures & making it easier to add new syscalls. - Support for building kernels with no floating point support, upon which any userland attempting to use floating point instructions will receive a SIGILL. Mostly useful to shrink the kernel & as preparation for nanoMIPS support which does not yet include FP. - MIPS SIMD Architecture (MSA) vector register context is now exposed by ptrace via a new NT_MIPS_MSA regset. - ASIDs are now stored as 64b values even for MIPS32 kernels, expanding the ASID version field sufficiently that we don't need to worry about overflow & avoiding rare issues with reused ASIDs that have been observed in the wild. - The branch delay slot "emulation" page is now mapped without write permission for the user, preventing its use as a nice location for attacks to execute malicious code from. - Support for ioremap_prot(), primarily to allow gdb or other ptrace users the ability to view their tracee's memory using the same cache coherency attribute. - Optimizations to more cpu_has_* macros, allowing more to be compile-time constant where possible. - Enable building the whole kernel with UBSAN instrumentation. - Enable building the kernel with link-time dead code & data elimination. Platform specific changes include: - The Boston board gains a workaround for DMA prefetching issues with the EG20T Platform Controller Hub that it uses. - Cleanups to Cavium Octeon code removing about 20k lines of redundant code, mostly unused or duplicate register definitions in headers. - defconfig updates for the DECstation machines, including new defconfigs for r4k & 64b machines. - Further work on Loongson 3 support. - DMA fixes for SiByte machines. -----BEGIN PGP SIGNATURE----- iIsEABYIADMWIQRgLjeFAZEXQzy86/s+p5+stXUA3QUCXB+vwBUccGF1bC5idXJ0 b25AbWlwcy5jb20ACgkQPqefrLV1AN3/EgD9Givei//X2oTd4w8HSe/uPeVkMnbA 93WMi1cS0EogAaUA/R7poLSnAE74mt+DT4PrGdQezUbXts9vUF/7VX0MvFIF =hmtJ -----END PGP SIGNATURE----- Merge tag 'mips_4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux Pull MIPS updates from Paul Burton: "Here's the main MIPS pull for Linux 4.21. Core architecture changes include: - Syscall tables & definitions for unistd.h are now generated by scripts, providing greater consistency with other architectures & making it easier to add new syscalls. - Support for building kernels with no floating point support, upon which any userland attempting to use floating point instructions will receive a SIGILL. Mostly useful to shrink the kernel & as preparation for nanoMIPS support which does not yet include FP. - MIPS SIMD Architecture (MSA) vector register context is now exposed by ptrace via a new NT_MIPS_MSA regset. - ASIDs are now stored as 64b values even for MIPS32 kernels, expanding the ASID version field sufficiently that we don't need to worry about overflow & avoiding rare issues with reused ASIDs that have been observed in the wild. - The branch delay slot "emulation" page is now mapped without write permission for the user, preventing its use as a nice location for attacks to execute malicious code from. - Support for ioremap_prot(), primarily to allow gdb or other ptrace users the ability to view their tracee's memory using the same cache coherency attribute. - Optimizations to more cpu_has_* macros, allowing more to be compile-time constant where possible. - Enable building the whole kernel with UBSAN instrumentation. - Enable building the kernel with link-time dead code & data elimination. Platform specific changes include: - The Boston board gains a workaround for DMA prefetching issues with the EG20T Platform Controller Hub that it uses. - Cleanups to Cavium Octeon code removing about 20k lines of redundant code, mostly unused or duplicate register definitions in headers. - defconfig updates for the DECstation machines, including new defconfigs for r4k & 64b machines. - Further work on Loongson 3 support. - DMA fixes for SiByte machines" * tag 'mips_4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (95 commits) MIPS: math-emu: Write-protect delay slot emulation pages MIPS: Remove struct mm_context_t fp_mode_switching field mips: generate uapi header and system call table files mips: add system call table generation support mips: remove syscall table entries mips: add +1 to __NR_syscalls in uapi header mips: rename scall64-64.S to scall64-n64.S mips: remove unused macros mips: add __NR_syscalls along with __NR_Linux_syscalls MIPS: Expand MIPS32 ASIDs to 64 bits MIPS: OCTEON: delete redundant register definitions MIPS: OCTEON: cvmx_gmxx_inf_mode: use oldest forward compatible definition MIPS: OCTEON: cvmx_mio_fus_dat3: use oldest forward compatible definition MIPS: OCTEON: cvmx_pko_mem_debug8: use oldest forward compatible definition MIPS: OCTEON: octeon-usb: use common gpio_bit definition MIPS: OCTEON: enable all OCTEON drivers in defconfig mips: annotate implicit fall throughs MIPS: Hardcode cpu_has_mips* where target ISA allows MIPS: MT: Remove norps command line parameter MIPS: Only include mmzone.h when CONFIG_NEED_MULTIPLE_NODES=y ... |
||
Linus Torvalds
|
5694cecdb0 |
arm64 festive updates for 4.21
In the end, we ended up with quite a lot more than I expected: - Support for ARMv8.3 Pointer Authentication in userspace (CRIU and kernel-side support to come later) - Support for per-thread stack canaries, pending an update to GCC that is currently undergoing review - Support for kexec_file_load(), which permits secure boot of a kexec payload but also happens to improve the performance of kexec dramatically because we can avoid the sucky purgatory code from userspace. Kdump will come later (requires updates to libfdt). - Optimisation of our dynamic CPU feature framework, so that all detected features are enabled via a single stop_machine() invocation - KPTI whitelisting of Cortex-A CPUs unaffected by Meltdown, so that they can benefit from global TLB entries when KASLR is not in use - 52-bit virtual addressing for userspace (kernel remains 48-bit) - Patch in LSE atomics for per-cpu atomic operations - Custom preempt.h implementation to avoid unconditional calls to preempt_schedule() from preempt_enable() - Support for the new 'SB' Speculation Barrier instruction - Vectorised implementation of XOR checksumming and CRC32 optimisations - Workaround for Cortex-A76 erratum #1165522 - Improved compatibility with Clang/LLD - Support for TX2 system PMUS for profiling the L3 cache and DMC - Reflect read-only permissions in the linear map by default - Ensure MMIO reads are ordered with subsequent calls to Xdelay() - Initial support for memory hotplug - Tweak the threshold when we invalidate the TLB by-ASID, so that mremap() performance is improved for ranges spanning multiple PMDs. - Minor refactoring and cleanups -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQEcBAABCgAGBQJcE4TmAAoJELescNyEwWM0Nr0H/iaU7/wQSzHyNXtZoImyKTul Blu2ga4/EqUrTU7AVVfmkl/3NBILWlgQVpY6tH6EfXQuvnxqD7CizbHyLdyO+z0S B5PsFUH2GLMNAi48AUNqGqkgb2knFbg+T+9IimijDBkKg1G/KhQnRg6bXX32mLJv Une8oshUPBVJMsHN1AcQknzKariuoE3u0SgJ+eOZ9yA2ZwKxP4yy1SkDt3xQrtI0 lojeRjxcyjTP1oGRNZC+BWUtGOT35p7y6cGTnBd/4TlqBGz5wVAJUcdoxnZ6JYVR O8+ob9zU+4I0+SKt80s7pTLqQiL9rxkKZ5joWK1pr1g9e0s5N5yoETXKFHgJYP8= =sYdt -----END PGP SIGNATURE----- Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 festive updates from Will Deacon: "In the end, we ended up with quite a lot more than I expected: - Support for ARMv8.3 Pointer Authentication in userspace (CRIU and kernel-side support to come later) - Support for per-thread stack canaries, pending an update to GCC that is currently undergoing review - Support for kexec_file_load(), which permits secure boot of a kexec payload but also happens to improve the performance of kexec dramatically because we can avoid the sucky purgatory code from userspace. Kdump will come later (requires updates to libfdt). - Optimisation of our dynamic CPU feature framework, so that all detected features are enabled via a single stop_machine() invocation - KPTI whitelisting of Cortex-A CPUs unaffected by Meltdown, so that they can benefit from global TLB entries when KASLR is not in use - 52-bit virtual addressing for userspace (kernel remains 48-bit) - Patch in LSE atomics for per-cpu atomic operations - Custom preempt.h implementation to avoid unconditional calls to preempt_schedule() from preempt_enable() - Support for the new 'SB' Speculation Barrier instruction - Vectorised implementation of XOR checksumming and CRC32 optimisations - Workaround for Cortex-A76 erratum #1165522 - Improved compatibility with Clang/LLD - Support for TX2 system PMUS for profiling the L3 cache and DMC - Reflect read-only permissions in the linear map by default - Ensure MMIO reads are ordered with subsequent calls to Xdelay() - Initial support for memory hotplug - Tweak the threshold when we invalidate the TLB by-ASID, so that mremap() performance is improved for ranges spanning multiple PMDs. - Minor refactoring and cleanups" * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (125 commits) arm64: kaslr: print PHYS_OFFSET in dump_kernel_offset() arm64: sysreg: Use _BITUL() when defining register bits arm64: cpufeature: Rework ptr auth hwcaps using multi_entry_cap_matches arm64: cpufeature: Reduce number of pointer auth CPU caps from 6 to 4 arm64: docs: document pointer authentication arm64: ptr auth: Move per-thread keys from thread_info to thread_struct arm64: enable pointer authentication arm64: add prctl control for resetting ptrauth keys arm64: perf: strip PAC when unwinding userspace arm64: expose user PAC bit positions via ptrace arm64: add basic pointer authentication support arm64/cpufeature: detect pointer authentication arm64: Don't trap host pointer auth use to EL2 arm64/kvm: hide ptrauth from guests arm64/kvm: consistently handle host HCR_EL2 flags arm64: add pointer authentication register bits arm64: add comments about EC exception levels arm64: perf: Treat EXCLUDE_EL* bit definitions as unsigned arm64: kpti: Whitelist Cortex-A CPUs that don't implement the CSV3 field arm64: enable per-task stack canaries ... |
||
Linus Torvalds
|
13e1ad2be3 |
Merge branch 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 pti updates from Thomas Gleixner: "No point in speculating what's in this parcel: - Drop the swap storage limit when L1TF is disabled so the full space is available - Add support for the new AMD STIBP always on mitigation mode - Fix a bunch of STIPB typos" * 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/speculation: Add support for STIBP always-on preferred mode x86/speculation/l1tf: Drop the swap storage limit restriction when l1tf=off x86/speculation: Change misspelled STIPB to STIBP |
||
Linus Torvalds
|
9f687dddc4 |
Merge branch 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner: "The timer department delivers the following christmas presents: Core code: - Use proper seqcount initializer to make lockdep happy - SPDX annotations and cleanup of license boilerplates - Use DEFINE_SHOW_ATTRIBUTE() instead of open coding it - Minor cleanups Driver code: - Add the sched_clock for the arc timer (Alexey Brodkin) - Change the file timer names for riscv, rockchip, tegra20, sun4i and meson6 (Daniel Lezcano) - Add the DT bindings for r8a7796, r8a77470 and r8a774a1 (Biju Das) - Remove the early platform driver registration for timer-ti-dm (Bartosz Golaszewski) - Provide the sched_clock for the riscv timer (Anup Patel) - Add support for ARM64 for the imx-gpt and convert the imx-tpm to the timer-of API (Anson Huang) - Remove useless irq protection for the imx-gpt (Clément Péron) - Remove a duplicate function name for the vt8500 (Dan Carpenter) - Remove obsolete inclusion of <asm/smp_twd.h> for the tegra20 (Geert Uytterhoeven) - Demote the prcmu and the custom sched_clock for the dbx500 and the ux500 (Linus Walleij) - Add a new timer clock for the RDA8810PL (Manivannan Sadhasivam) - Rename the macro to stick to the register name and add the delay timer (Martin Blumenstingl) - Switch the bcm2835 to the SPDX identifier (Stefan Wahren) - Fix the interrupt register access on the fttmr010 (Tao Ren) - Add missing of_node_put in the initialization path on the integrator-ap (Yangtao Li)" * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (39 commits) dt-bindings: timer: Document RDA8810PL SoC timer clocksource/drivers/rda: Add clock driver for RDA8810PL SoC clocksource/drivers/meson6: Change name meson6_timer timer-meson6 clocksource/drivers/sun4i: Change name sun4i_timer to timer-sun4i clocksource/drivers/tegra20: Change name tegra20_timer to timer-tegra20 clocksource/drivers/rockchip: Change name rockchip_timer to timer-rockchip clocksource/drivers/riscv: Change name riscv_timer to timer-riscv clocksource/drivers/riscv_timer: Provide the sched_clock clocksource/drivers/timer-imx-tpm: Specify clock name for timer-of clocksource/drivers/fttmr010: Fix invalid interrupt register access clocksource/drivers/integrator-ap: Add missing of_node_put() clocksource/drivers/bcm2835: Switch to SPDX identifier dt-bindings: timer: renesas, cmt: Document r8a774a1 CMT support clocksource/drivers/timer-imx-tpm: Convert the driver to timer-of clocksource/drivers/arc_timer: Utilize generic sched_clock dt-bindings: timer: renesas, cmt: Document r8a77470 CMT support dt-bindings: timer: renesas, cmt: Document r8a7796 CMT support clocksource/drivers/imx-gpt: Remove unnecessary irq protection clocksource/drivers/imx-gpt: Add support for ARM64 clocksource/drivers/meson6_timer: Implement the ARM delay timer ... |
||
Linus Torvalds
|
e4b99d415c |
Merge branch 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner: "The interrupt department provides: Core updates: - Better spreading to NUMA nodes in the affinity management - Support for more than one set of interrupts to spread out to allow separate queues for separate functionality of a single device. - Decouple the non queue interrupts from being managed. Those are usually general interrupts for error handling etc. and those should never be shut down. This also a preparation to utilize the spreading mechanism for initial spreading of non-managed interrupts later. - Make the single CPU target selection in the matrix allocator more balanced so interrupts won't accumulate on single CPUs in certain situations. - A large spell checking patch so we don't end up fixing single typos over and over. Driver updates: - A bunch of new irqchip drivers (RDA8810PL, Madera, imx-irqsteer) - Updates for the 8MQ, F1C100s platform drivers - A number of SPDX cleanups - A workaround for a very broken GICv3 implementation on msm8996 which sports a botched register set. - A platform-msi fix to prevent memory leakage - Various cleanups" * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (37 commits) genirq/affinity: Add is_managed to struct irq_affinity_desc genirq/core: Introduce struct irq_affinity_desc genirq/affinity: Remove excess indentation irqchip/stm32: protect configuration registers with hwspinlock dt-bindings: interrupt-controller: stm32: Document hwlock properties irqchip: Add driver for imx-irqsteer controller dt-bindings/irq: Add binding for Freescale IRQSTEER multiplexer irqchip: Add driver for Cirrus Logic Madera codecs genirq: Fix various typos in comments irqchip/irq-imx-gpcv2: Add IRQCHIP_DECLARE for i.MX8MQ compatible irqchip/irq-rda-intc: Fix return value check in rda8810_intc_init() irqchip/irq-imx-gpcv2: Silence "fall through" warning irqchip/gic-v3: Add quirk for msm8996 broken registers irqchip/gic: Add support to device tree based quirks dt-bindings/gic-v3: Add msm8996 compatible string irqchip/sun4i: Add support for Allwinner ARMv5 F1C100s irqchip/sun4i: Move IC specific register offsets to struct irqchip/sun4i: Add a struct to hold global variables dt-bindings: interrupt-controller: Add suniv interrupt-controller irqchip: Add RDA8810PL interrupt driver ... |
||
Linus Torvalds
|
d8924c0d76 |
Device properties framework updates for 4.21-rc1
- Introduce "software nodes", analogous to the DT and ACPI firmware nodes except that they can be created by kernel code, in order to complement fwnodes representing real firmware nodes when they are incomplete (for example missing device properties) and to supply the primary fwnode when the firmware lacks hardware description for a device completely, and replace the "property_set" struct fwnode_handle type with software nodes (Heikki Krogerus). - Clean up the just introduced software nodes support and fix a commet in the graph-handling code (Colin Ian King, Marco Felsch). -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iQIcBAABCAAGBQJcHMUXAAoJEILEb/54YlRxqJIP/2bDrVQphjXoZWC0/BAOjAMO 1WIaS+LI1VpvnnSxVQllfGHSI4voKiF1fcnKMui/VjCaH/BYhh98RJtCoZ72fHHt WlKlMhNm2nQ5XibZP1Ge9u2NDkfebgOLTHkAam/7dMwxKBzxbK1ytcuggMnL2HRY 9wv6N/y1iLmfFABE0WEV/a3715i5MmBxC5ApIBvjK4tRv+KpYaJ7i03+4qGxpnHY hGvQE0b49hJkBGwVeoEPz/3HpsJ1WYBj4Oi7UyVa8A/GyWaRdwLtUVmidBua4Dah 1eVjpjj6vreuHRwpQbMPkMecSsdon7EzsoyWklAGKPXuA5GKmvoDoLu66DORH93O a3h60vq5SqsVhqJhzJpN7SZLAeGdQymSW0aABpKotKIrNVZMkWTIyxvPSw3PKnF0 3dhgv1QUktKteuCLFfuLqp+vHbPEauOul4iPwElpno6LJ1xzVaf/sNXoHPJwBOs9 LYHUsB8G9L3Y7qvDn4RpR3zYChFE6/J53U8B4P0g+lqV1nxz28ov00VwZJihdpcz wzj+lF53Tzf4gMiaIdjSsrWMtx7lNcAowYsbdb8nyng555HMaW/ROzw1gv/GB5hp 2Iaru6+J4QGbwAaLlOVeGY0TenCJUuF+tF+ufVHujceehjAisDzF+zev0VivRv26 UwRSmhd/g1tPsoeJVhQN =Z3Zj -----END PGP SIGNATURE----- Merge tag 'devprop-4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull device properties framework updates from Rafael Wysocki: "This introduces 'software nodes' that are analogous to the DT and ACPI firmware nodes except that they can be created by drivers themselves and do a couple of assorted cleanups. Specifics: - Introduce "software nodes", analogous to the DT and ACPI firmware nodes except that they can be created by kernel code, in order to complement fwnodes representing real firmware nodes when they are incomplete (for example missing device properties) and to supply the primary fwnode when the firmware lacks hardware description for a device completely, and replace the "property_set" struct fwnode_handle type with software nodes (Heikki Krogerus). - Clean up the just introduced software nodes support and fix a commet in the graph-handling code (Colin Ian King, Marco Felsch)" * tag 'devprop-4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: device property: fix fwnode_graph_get_next_endpoint() documentation drivers: base: swnode: remove need for a temporary string for the node name device property: Remove struct property_set device property: Move device_add_properties() to swnode.c drivers: base: Introducing software nodes to the firmware node framework ACPI / glue: Add acpi_platform_notify() function drivers core: Prepare support for multiple platform notifications driver core: platform: Remove duplicated device_remove_properties() call |
||
Linus Torvalds
|
1fbb2dc6f0 |
This round is dominated by NXP's i.MX clk drivers. We gained support for two or
three i.MX SoCs in here and that mostly means a lot of driver code and data. Beyond that platform, there are some new Mediatek, Amlogic, and Qualcomm clk drivers added in here, and then we get to the long tail of driver updates and non-critical fixes all around, including code for vendors such as Renesas, Rockchip, Nvidia, and Allwinner. Overall, the driver updates look normal. Beyond the usual driver updates we have an update to make registering OF based clk providers a little simpler when they're devices created as a child of a device backed by a node in DT. Drivers don't have to jump through hoops to unregister the provider upon driver removal anymore because the API does the right thing and uses the parent device DT node. Core: - Make devm_of_clk_add_hw_provider() use parent dt node if necessary - Various SPDX taggings - Mark clk_ops const when possible New Drivers: - NXP i.MX7ULP SoC clock support - NXP i.MX8QXP SoC clock support - NXP i.MX8MQ SoC clock support - NXP QorIQ T1023 SoC support - Qualcomm SDM845 audio subsystem clks - Qualcomm SDM845 GPU clck controllers - Qualcomm QCS404 RPM clk support - Mediatek MT7629 SoC clk controllers - Allwinner F1c100s SoC clocks - Allwinner H6 display engine clocks - Amlogic GX video clocks - Support for Amlogic meson8b CPU frequency scaling - Amlogic Meson8b CPU post-divider clocks Updates: - Proper suspend/resume on VersaClock5 - Shrink code some with DEFINE_SHOW_ATTRIBUTE() - Register fixes for Rockchip rk3188 and rk3328 - One new critical clock for Rockchip rk3188 and a fixed clock id (double used number) - New clock id for Rockchip rk3328 - Amlogic Meson8/Meson8b video clock support - Amlogic got a clk-input helper and used it for the axg-audio clock driver - Sigma Delta modulation for the Allwinner A33 audio clocks - Support for CPEX (timer) clocks on various Renesas R-Car Gen3 and RZ/G2 SoCs - Support for SDHI HS400 clocks on early revisions of Renesas R-Car H3 and M3-W - Support for SDHI and USB clocks on Renesas RZ/A2 - Support for RPC (SPI Multi I/O Bus Controller) clocks on Renesas R-Car V3M - Qualcomm MSM8998 GCC driver improvements (resets, drop unused clks, etc.) -----BEGIN PGP SIGNATURE----- iQJFBAABCgAvFiEE9L57QeeUxqYDyoaDrQKIl8bklSUFAlwZeqgRHHNib3lkQGtl cm5lbC5vcmcACgkQrQKIl8bklSU7qA/8C7p4EL36zkFFHhF6wh9+CiLIcTt1OKEu ePgTo0UP9Q94BzHy0SOZhwV6w6yqeOfTXCAYZWdV2UcNKyPDPlIMZPkxrNbH5twq kptjuBS1FqnnMgfusUP88bUrhQ5hUGEaKaC4iCDK7s0YI4nBfVB28G5ZMbFTSE5L hrIufRfZ0aQWQw6y8aGI4qDtUeg09s6cEwFw8cA+vArAJ+2hwv0zjFGMxQskNJ6N JubPopVCWuP+jsqMrGP48Rg4BphSQ97h4B65Uj0BNPQ4HTIMLVvXX6Pr8sRGvKiO IMsNQq+fS+ECmdcV7IUzSv14cX2mLCb9XWgfCnWEK67/Ny3deaurtzF0qloWnrtv kFSDE4df5cJkMkK2HZF8/e0/qn0FbGP6/wDSwfdhuVuJPmfdF5m552TtQuehNHey YNy/pIY4sCh0zCkeU212TFKvAaRLd8qVqh2nikn3Cs7ik0G5Bhv2GAqQmIGJEh6g f3n/WLTzVUqFksPC5KRZHu/1UIe4sz8i14AZXmxvCyH8buLSznhoniB0wwRrQdLL VcJ2ia4b4e4JBJg1A5b9IqfEliJBNUV0UZTakduXBnThBpXQeH0t6YesXNaPqKaM qJKvaQbNk0FNFsIO4GHxwrmujrf8SrHdhWuf/rh5O6mfOiXnNTzFcLZ59+nx86Bh 3sUFruRiDx8= =iNvu -----END PGP SIGNATURE----- Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "This round is dominated by NXP's i.MX clk drivers. We gained support for two or three i.MX SoCs in here and that mostly means a lot of driver code and data. Beyond that platform, there are some new Mediatek, Amlogic, and Qualcomm clk drivers added in here, and then we get to the long tail of driver updates and non-critical fixes all around, including code for vendors such as Renesas, Rockchip, Nvidia, and Allwinner. Overall, the driver updates look normal. Apart from the usual driver updates we have an update to make registering OF based clk providers a little simpler when they're devices created as a child of a device backed by a node in DT. Drivers don't have to jump through hoops to unregister the provider upon driver removal anymore because the API does the right thing and uses the parent device DT node. Summary: Core: - Make devm_of_clk_add_hw_provider() use parent dt node if necessary - Various SPDX taggings - Mark clk_ops const when possible New Drivers: - NXP i.MX7ULP SoC clock support - NXP i.MX8QXP SoC clock support - NXP i.MX8MQ SoC clock support - NXP QorIQ T1023 SoC support - Qualcomm SDM845 audio subsystem clks - Qualcomm SDM845 GPU clck controllers - Qualcomm QCS404 RPM clk support - Mediatek MT7629 SoC clk controllers - Allwinner F1c100s SoC clocks - Allwinner H6 display engine clocks - Amlogic GX video clocks - Support for Amlogic meson8b CPU frequency scaling - Amlogic Meson8b CPU post-divider clocks Updates: - Proper suspend/resume on VersaClock5 - Shrink code some with DEFINE_SHOW_ATTRIBUTE() - Register fixes for Rockchip rk3188 and rk3328 - One new critical clock for Rockchip rk3188 and a fixed clock id (double used number) - New clock id for Rockchip rk3328 - Amlogic Meson8/Meson8b video clock support - Amlogic got a clk-input helper and used it for the axg-audio clock driver - Sigma Delta modulation for the Allwinner A33 audio clocks - Support for CPEX (timer) clocks on various Renesas R-Car Gen3 and RZ/G2 SoCs - Support for SDHI HS400 clocks on early revisions of Renesas R-Car H3 and M3-W - Support for SDHI and USB clocks on Renesas RZ/A2 - Support for RPC (SPI Multi I/O Bus Controller) clocks on Renesas R-Car V3M - Qualcomm MSM8998 GCC driver improvements (resets, drop unused clks, etc)" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (172 commits) clk: imx: imx7ulp: add arm hsrun mode clocks support dt-bindings: clock: imx7ulp: add HSRUN mode related clocks clk: Use of_node_name_eq for node name comparisons clk: vc5: Add suspend/resume support clk: qcom: Drop unused 8998 clock clk: qcom: Leave mmss noc on for 8998 clk: tegra: Return the exact clock rate from clk_round_rate clk: tegra30: Use Tegra CPU powergate helper function soc/tegra: pmc: Drop SMP dependency from CPU APIs clk: tegra: Fix maximum audio sync clock for Tegra124/210 clk: tegra: get rid of duplicate defines clk: imx: add imx8qxp lpcg driver clk: imx: add lpcg clock support clk: imx: add imx8qxp clk driver clk: imx: Make the i.MX8MQ CCM clock driver CLK_IMX8MQ dependant clk: imx: add scu clock common part clk: imx: add configuration option for mmio clks dt-bindings: clock: add imx8qxp lpcg clock binding dt-bindings: clock: imx8qxp: add SCU clock IDs clk: qcom: Add missing msm8998 resets ... |
||
Linus Torvalds
|
0051db8218 |
spi: Updates for v4.21
The main thing this release has been a lot of work on the integration with SPI NOR flashes, there's been some specific support for a while for controller features designed to make them perform better but it's not worked out as well as hoped so the interface has been redesigned in a way that will hopefully do better - it's already been adopted by a number of additional controllers so things are looking good. Otherwise most of the work has been driver specific: - Support for better integration with NOR flashes from Boris Brezillon and Yogesh Narayan Gaur plus usage of it in several drivers. - A big cleanup of the Rockchip driver from Emil Renner Berthing. - Lots of performance improvements for bcm2835 from Lukas Wunner. - Slave mode support for pxa2xx from Lubomir Rintel. - Support for Macronix MXIC, Mediatek MT7629 and MT8183, NPCM PSPI, and Renesas r8a77470. -----BEGIN PGP SIGNATURE----- iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAlwhLBsTHGJyb29uaWVA a2VybmVsLm9yZwAKCRAk1otyXVSH0AGvB/9odNqLjVJiG6v0EIKqLyYXMzCYgmrZ RyBZoqTKoNmXxv0b/Fdsi8VaiJ8x2WIcqLzhpQlg3twOCvXQbgoA+JzQNyHZlZ1u 8cxfFGebVS6r0k14bkmAVR8LSvGlReOZQLC2MvccVc/UAwN0/p5ncN0xUADHvIOW /Pmx0/e2uCMx1+OMAudlUXQ5IIbnb5/OjvDfR/7tlVo5YKSgkHBJeunOYSaPSNuO QNf9+kZxvQ8djYbpYqqHWovPF7JSlQAj0WkMJPB/g3R09E/vatSBlCMnETBJWn/L wogHquLK/vwRaS+MqTSrGsi0ylpqgxmZrbGKcXKF51fim0EvBg7cMqe6 =ZnI3 -----END PGP SIGNATURE----- Merge tag 'spi-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi updates from Mark Brown: "The main thing this release has been a lot of work on the integration with SPI NOR flashes, there's been some specific support for a while for controller features designed to make them perform better but it's not worked out as well as hoped so the interface has been redesigned in a way that will hopefully do better - it's already been adopted by a number of additional controllers so things are looking good. Otherwise most of the work has been driver specific: - Support for better integration with NOR flashes from Boris Brezillon and Yogesh Narayan Gaur plus usage of it in several drivers. - A big cleanup of the Rockchip driver from Emil Renner Berthing. - Lots of performance improvements for bcm2835 from Lukas Wunner. - Slave mode support for pxa2xx from Lubomir Rintel. - Support for Macronix MXIC, Mediatek MT7629 and MT8183, NPCM PSPI, and Renesas r8a77470" * tag 'spi-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (90 commits) spi: sh-msiof: Reduce the number of times write to and perform the transmission from FIFO spi: sh-msiof: Add r8a774c0 support doc: lpspi: Document DT bindings for LPSPI slave mode spi: lpspi: Let watermark change with send data length spi: lpspi: Add slave mode support spi: lpspi: Replace all "master" with "controller" spi: imx: drop useless member speed_hz from driver data struct spi: imx: rename config callback and add useful parameters spi: imx: style fixes spi: imx: mx51-ecspi: Move some initialisation to prepare_message hook. spi: imx: add a device specific prepare_message callback mtd: atmel-quadspi: disallow building on ebsa110 spi: Update NPCM PSPI controller documentation spi: npcm: Modify pspi send function spi: Use of_node_name_eq for node name comparisons spi: dw-mmio: add ACPI support spi: bcm2835: Synchronize with callback on DMA termination spi: bcm2835: Speed up FIFO access if fill level is known spi: bcm2835: Polish transfer of DMA prologue spi: spi-mem: add support for octal mode I/O data transfer ... |
||
Linus Torvalds
|
79f20778fb |
regulator: Updates for v4.20
This has been a very busy release for the core, some fixes, one large new feature and a big bit of refactoring to update the GPIO API: - Support for coupled regulators from Dmitry Osipenko based on a prior attempt by Maciej Purski, allowing us to handle situations where the voltages on two regulators can't be too far apart from each other. - Conversion of the GPIO support in both drivers and the core to use GPIO descriptors rather than numbers, part of the overall project to remove GPIO numbers. - Support for standby mode suspend states from Andrei Stefanescu. - New drivers for Allwinner AXP209, Cirrus Logic Lochnagar and Microchip MPC16502. -----BEGIN PGP SIGNATURE----- iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAlwhKkcTHGJyb29uaWVA a2VybmVsLm9yZwAKCRAk1otyXVSH0DFfB/91/ECmybKTP+RvwUTZ0rrqFFs2C9Vl 76vH242exyJuzv44inWi9gOcXFDn7c9hf7Vl4Jd5UVP53Nzm5I8ZwExQsxax9BsN hltlX01UpRAmHNkMNrnJH6YAntD3EicYGSUDjohkWItIDqpMAjhWpx/yGXTEjBir gvkV51bF3qAYQe0g6MmK3KeVw96QPNjUhoPbsqbpaXaF6fmyOVzMiFrffJGmUAyM J5qRv3OhsZiZy2/zxNLkUI6y4XKDEaFJ3RhSKoUwItGyKQt2saXMoJGyEEWm2b6X coTm0ZQk+EU+b659lDHErTM4YUx7p7tQt3VM09NoMD8B261TdZ0y99Oh =8Rxt -----END PGP SIGNATURE----- Merge tag 'regulator-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator updates from Mark Brown: "This has been a very busy release for the core, some fixes, one large new feature and a big bit of refactoring to update the GPIO API: - Support for coupled regulators from Dmitry Osipenko based on a prior attempt by Maciej Purski, allowing us to handle situations where the voltages on two regulators can't be too far apart from each other. - Conversion of the GPIO support in both drivers and the core to use GPIO descriptors rather than numbers, part of the overall project to remove GPIO numbers. - Support for standby mode suspend states from Andrei Stefanescu. - New drivers for Allwinner AXP209, Cirrus Logic Lochnagar and Microchip MPC16502" * tag 'regulator-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (90 commits) regulator: tps65910: fix a missing check of return value regulator: mcp16502: Select REGMAP_I2C to fix build error regulator: convert to DEFINE_SHOW_ATTRIBUTE regulator: mcp16502: Fix missing n_voltages setting regulator: mcp16502: Use #ifdef CONFIG_PM_SLEEP around mcp16502_suspend/resume_noirq regulator: mcp16502: code cleanup regulator: act8945a-regulator: make symbol act8945a_pm static drivers/regulator: fix a missing check of return value regulator: act8945a-regulator: fix 'defined but not used' compiler warning regulator: axp20x: fix set_ramp_delay for AXP209/dcdc2 regulator: mcp16502: add support for suspend mfd: axp20x: use explicit bit defines mfd: axp20x: Clean up included headers regulator: dts: enable soft-start and ramp delay for the OLinuXino Lime2 dt-bindings: mfd: axp20x: Add software based soft_start for AXP209 LDO3 regulator: axp20x: add software based soft_start for AXP209 LDO3 dt-bindings: mfd: axp20x: add support for regulator-ramp-delay for AXP209 regulator: axp20x: add support for set_ramp_delay for AXP209 mfd: axp20x: name voltage ramping define properly regulator: mcp16502: add regulator driver for MCP16502 ... |
||
Linus Torvalds
|
d923fd6dc1 |
pwm: Changes for v4.21-rc1
Not a lot going on this cycle. There's some more cleanup going on and new driver support that was not quite ready in time for v4.21-rc1, but here are a few fixes and improvements that are good to go. The Kona PWM driver can now be built on the Cygnus architecture and the i.MX driver gained support for hardware readback. Some small fixes are provided for the clks711x and lpc18xx-sct drivers. Finally, to round things off some drivers are switched to SPDX license identifiers. -----BEGIN PGP SIGNATURE----- iQJNBAABCAA3FiEEiOrDCAFJzPfAjcif3SOs138+s6EFAlwgvusZHHRoaWVycnku cmVkaW5nQGdtYWlsLmNvbQAKCRDdI6zXfz6zobXWEACgOF26QUs/Vt6n7r7XRXeL rHZwhJ44+0/wHm6MNJcj8jy7Ct0iJVBhxyK4680A0n2u1T6SxA0YZu2yVC46iNFc 52bipsZ3U8uuKHBvWhGxmYXknj1nJqKPg2yAxyJ4dD6LlJaGYJKaxZe4BH/gZ4qI WaYH88rcopfcVcrzl57IPoibiEwfN1V2WAvGkKihj1y1KN65mbUHgRFAqAA2s0u/ qdpGpqIrBEHeOZSoKuNDEADkO5xiHpO+uEcxY2xeWg0onP/X+tVHerkG28+ruwP/ PWXI3uEe9SAeEzf3YKNqCNWLLRVQ/+JU6oS6qwMjhgV5w+HppIMIUJUo1hddofL0 RvTZ3IhTpGXGCYpp1OuF51ZWZpTb56VZ4roHt20bjaYLqA6SEu0AszxELVvOYO+B kBVMwohtNYeZpuM2eGOdvZAMG55cicRa55MZzpCDMNfJZSr0CrVwnX6o5MKTuozA B21wxm9PPR/miPBmGnFegXmuqB+Uf/uWqXeGfWwwdlfS4dchOb8pBxDoO5P53Dx6 xOnfWQu0Ol1sUVLXg9l0rEJAHx1F3SncrE4WWnV+pK1NkMoz9+Ry5aVqIBOFI+Qw ImEssuM52sv93S9HXuNq6DOUwoOSwkE4HSjPneKmAA1XMQ846YB/zj2R0Ki+dZAK Zlk9HVwIOKpP0gG0tcPBOA== =ni7n -----END PGP SIGNATURE----- Merge tag 'pwm/for-4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm Pull pwm updates from Thierry Reding: "Not a lot going on this cycle. There's some more cleanup going on and new driver support that was not quite ready in time for v4.21-rc1, but here are a few fixes and improvements that are good to go. The Kona PWM driver can now be built on the Cygnus architecture and the i.MX driver gained support for hardware readback. Some small fixes are provided for the clks711x and lpc18xx-sct drivers. Finally, to round things off some drivers are switched to SPDX license identifiers" * tag 'pwm/for-4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: dt-bindings: pwm: rcar: Add r8a774c0 support pwm: imx: Add ipg clock operation pwm: clps711x: Switch to SPDX identifier pwm: clps711x: Fix period calculation pwm: bcm2835: Switch to SPDX identifier pwm: Enable Kona PWM to be built for the Cygnus architecture pwm: Drop legacy wrapper for changing polarity pwm: imx: Implement get_state() function for hardware readout pwm: imx: Use bitops and bitfield macros to define register values pwm: imx: Sort include files pwm: lpc18xx-sct: Don't reconfigure PWM in .request and .free |
||
Linus Torvalds
|
1e2af254ef |
Power management updates for 4.21-rc1
- Add sysadmin documentation for cpuidle (Rafael Wysocki). - Make it possible to specify a cpuidle governor from kernel command line, add new cpuidle state sysfs attributes for governor evaluation, and improve the "polling" idle state handling (Rafael Wysocki). - Fix the handling of the "required-opps" DT property in the operating performance points (OPP) framework, improve the integration of it with the generic power domains (genpd) framework, improve the handling of performance states in them and clean up the idle states vs performance states separation in genpd (Viresh Kumar, Ulf Hansson). - Add a cpufreq driver called "qcom-hw" for Qualcomm SoCs using a hardware engine to control CPU frequency transitions along with DT bindings for it (Taniya Das). - Fix an intel_pstate driver issue related to CPU offline and update the documentation of it (Srinivas Pandruvada). - Clean up the imx6q cpufreq driver (Anson Huang). - Add SPDX license IDs to cpufreq schedutil governor files (Daniel Lezcano). - Switch over the runtime PM framework to using high-res timers for device autosuspend to allow the control of it to be more precise (Vincent Guittot). - Disable non-wakeup ACPI GPEs during suspend-to-idle so that they don't prevent the system from reaching the target low-power state and simplify the suspend-to-idle handling on ACPI platforms without full Low-Power S0 Idle (LPS0) support (Rafael Wysocki). - Add system-wide suspend and resume support to the devfreq framework (Lukasz Luba). - Clean up the SmartReflex adaptive voltage scaling (AVS) driver and add an SPDX license ID to it (Nishanth Menon, Uwe Kleine-König, Thomas Meyer). - Get rid of code duplication by using the DEFINE_SHOW_ATTRIBUTE macro in some places, fix some DT node refcount leaks, and do some other janitorial cleanups (Yangtao Li). - Update the cpupower, intel_pstate_tracer and turbosat utilities (Abhishek Goel, Doug Smythies, Len Brown). -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iQIcBAABCAAGBQJcHMOKAAoJEILEb/54YlRxtHUP/i4MePJYYIab3dW2WMtFC9wP K3Z/qva5uiEampEZbjlATlqUrd0XxMU2YfkJ9N08rJ33bKnBi8wNp0BPiwZjYs77 lwjuEQ0Depz85LJ7W+dOjjxucdYv/H/ZXVK7VF2sfAfbpEbD7+RNTTa1+zdoh3Yq AiCKH/fU+Yc+wOMcXxj8vWe8EecsuYfZUC/p/yJDv1uMaUyHTgiCAyE/S2JzvZcQ mGFmly8b1hSkvCPOsipq/O8HUDtve8sOyZvFO5Up5BiNbDyhEHS4tDiKipbKgc/J ljzP3pVATlnEZLFxyqg32PhuhwYB0MtN3+BZGTjLelqTmElTx9A2JvWBVk4jgaC9 ps97nUz1HO2dr1ERDyMnDtZFHFp24LVQcIB2RKfj/lqSq94IWQphmNZVF219jdyd 68wR2/fnkzTeDhJ1JvcJb5XKrrd/wq3IKfCJAd9AXVxy27BrCB0ryTsQFvXJ+AzV n603yf3Sb7QaIC7Mofhj2WT3N/BQnzMzZhBJRA3EeX/Gd7TkLtQuvvHZQzcGbgOY GGm6WKGWgEUp3YIJIz5ihUuy9SUETCvR2PqGZfo+Wmc7F77j/5FY5ejRt3llkeFn 8KaVQH9YIRjffBr1nclXMHKaRtf/JVB9SgVmDvA6Sh3Ac5/KBy3+IgwiJ2z5dunr tYV/QJ22r15xEBITTSJ7 =WhM8 -----END PGP SIGNATURE----- Merge tag 'pm-4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management updates from Rafael Wysocki: "These add sysadmin documentation for cpuidle, extend the cpuidle subsystem somewhat, improve the handling of performance states in the generic power domains (genpd) and operating performance points (OPP) frameworks, add a new cpufreq driver for Qualcomm SoCs, update some other cpufreq drivers, switch over the runtime PM framework to using high-res timers for device autosuspend, fix a problem with suspend-to-idle on ACPI-based platforms, add system-wide suspend and resume handling to the devfreq framework, do some janitorial cleanups all over and update some utilities. Specifics: - Add sysadmin documentation for cpuidle (Rafael Wysocki). - Make it possible to specify a cpuidle governor from kernel command line, add new cpuidle state sysfs attributes for governor evaluation, and improve the "polling" idle state handling (Rafael Wysocki). - Fix the handling of the "required-opps" DT property in the operating performance points (OPP) framework, improve the integration of it with the generic power domains (genpd) framework, improve the handling of performance states in them and clean up the idle states vs performance states separation in genpd (Viresh Kumar, Ulf Hansson). - Add a cpufreq driver called "qcom-hw" for Qualcomm SoCs using a hardware engine to control CPU frequency transitions along with DT bindings for it (Taniya Das). - Fix an intel_pstate driver issue related to CPU offline and update the documentation of it (Srinivas Pandruvada). - Clean up the imx6q cpufreq driver (Anson Huang). - Add SPDX license IDs to cpufreq schedutil governor files (Daniel Lezcano). - Switch over the runtime PM framework to using high-res timers for device autosuspend to allow the control of it to be more precise (Vincent Guittot). - Disable non-wakeup ACPI GPEs during suspend-to-idle so that they don't prevent the system from reaching the target low-power state and simplify the suspend-to-idle handling on ACPI platforms without full Low-Power S0 Idle (LPS0) support (Rafael Wysocki). - Add system-wide suspend and resume support to the devfreq framework (Lukasz Luba). - Clean up the SmartReflex adaptive voltage scaling (AVS) driver and add an SPDX license ID to it (Nishanth Menon, Uwe Kleine-König, Thomas Meyer). - Get rid of code duplication by using the DEFINE_SHOW_ATTRIBUTE macro in some places, fix some DT node refcount leaks, and do some other janitorial cleanups (Yangtao Li). - Update the cpupower, intel_pstate_tracer and turbosat utilities (Abhishek Goel, Doug Smythies, Len Brown)" * tag 'pm-4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (54 commits) PM / Domains: remove define_genpd_open_function() and define_genpd_debugfs_fops() PM-runtime: Switch autosuspend over to using hrtimers cpufreq: qcom-hw: Add support for QCOM cpufreq HW driver dt-bindings: cpufreq: Introduce QCOM cpufreq firmware bindings ACPI: PM: Loop in full LPS0 mode only ACPI: EC / PM: Disable non-wakeup GPEs for suspend-to-idle tools/power/x86/intel_pstate_tracer: Fix non root execution for post processing a trace file tools/power turbostat: consolidate duplicate model numbers tools/power turbostat: fix goldmont C-state limit decoding PM / Domains: Propagate performance state updates PM / Domains: Factorize dev_pm_genpd_set_performance_state() PM / Domains: Save OPP table pointer in genpd OPP: Don't return 0 on error from of_get_required_opp_performance_state() OPP: Add dev_pm_opp_xlate_performance_state() helper OPP: Improve _find_table_of_opp_np() PM / Domains: Make genpd performance states orthogonal to the idlestates PM / sleep: convert to DEFINE_SHOW_ATTRIBUTE cpuidle: Add 'above' and 'below' idle state metrics PM / AVS: SmartReflex: Switch to SPDX Licence ID PM / AVS: SmartReflex: NULL check before some freeing functions is not needed ... |
||
Linus Torvalds
|
b271b2127e |
- Support for ZynqMP DDR controller support to synopsys_edac along
with a driver cleanup and generalization for the addition of support for the new IP. (Manish Narani) - Removal of the /sys/bus/edac devices hierarchy. This enabled us to get rid of the silly memory controllers maximum number notion. (Tony Luck and Borislav Petkov) - skx_edac improvements and fixes. (Qiuxu Zhuo and Tony Luck) - The usual garden variety of small cleanups and fixes. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAlwb8+AACgkQEsHwGGHe VUrG5A//a/x5hWrRROEyO9rPlsBgGWfC+B4AhzPv4aq6CrOHLmiAJ5wQbRqsU1qE lrlxI+SAxSJXLba2AMTSGdOBdmscL10rs97iqdVzpZ2bFjAVzxOZ0wJNlrPZqvRP /MMJbOxaHSOfS20VZCADT2ebk64gmPWroLCR3pj4ZPMCVWVinN23McgIN2EB901z HA3yi41cNHbV12/qrbauMRVTfc59oymPe1fhgeygaeHutTKbckSy/vUmxkX5fsO/ 9mTeB//kbqOrOO6TEGb1wwPC3kd0mJPiC2FGWO9Ty2w5EiDFuX1uZeJJf9dDayc4 C/fu/YG/wy+x9OzbJD/LLFitrnaW04OUUx2551dJY2EMJ6+Tj7krcKIJyXei4PP4 j/8jX99z0EiitbkwG1yh0QuZi7wh4FD3yl7h2BFDmwCuq+x5MczmXEkWJb4jrfB6 G2xS20VmklQQb8QxA5gjl2toj0nb2ulfCHgQcUK5fgHS1dwS5W/gAUNiKeQmngny lAcWh3dJJLEmH+N/edp0eC+aLBgKB2juA43bwOw9isL1wbV3RtSF+EZRgm/IjHVA rBnDoIMAi/YCFXgYqhmH2M+gEh8RIKQatpZEc0RaW8EpPNCVRFvZECUFy3bkpXbj 58Nzo+JQvXJVFOWhGW5337DJ+FEi6FWefmYMYNaA4zvUZbigiWk= =AyeO -----END PGP SIGNATURE----- Merge tag 'edac_for_4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp Pull EDAC updates from Borislav Petkov: - Support for ZynqMP DDR controller support to synopsys_edac along with a driver cleanup and generalization for the addition of support for the new IP. (Manish Narani) - Removal of the /sys/bus/edac devices hierarchy. This enabled us to get rid of the silly memory controllers maximum number notion. (Tony Luck and Borislav Petkov) - skx_edac improvements and fixes. (Qiuxu Zhuo and Tony Luck) - The usual garden variety of small cleanups and fixes. * tag 'edac_for_4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: (25 commits) EDAC, fsl_ddr: Add LS1021A to the list of supported hardware EDAC, i5000: Remove set but not used local variables MAINTAINERS, EDAC: Drop bouncing email EDAC, i82975x: Fix spelling mistake "reserverd" -> "reserved" EDAC, fsl: Move error injection under CONFIG_EDAC_DEBUG EDAC, skx: Let EDAC core show the decoded result for debugfs EDAC, skx: Move debugfs node under EDAC's hierarchy EDAC, skx: Prepend hex formatting with '0x' EDAC, skx: Fix function calling order in skx_exit() EDAC: Drop per-memory controller buses EDAC: Don't add devices under /sys/bus/edac EDAC: Fix indentation issues in several EDAC drivers EDAC, skx: Fix randconfig builds in a better way EDAC, i82975x: Remove set but not used variable dtype EDAC, qcom_edac: Remove irq_handled local variable EDAC, synopsys: Add Error Injection support for ZynqMP DDR controller EDAC, synopsys: Add ECC support for ZynqMP DDR controller EDAC, synopsys: Add macro defines for ZynqMP DDRC dt: bindings: Document ZynqMP DDRC in Synopsys documentation EDAC, synopsys: Add error handling for the of_device_get_match_data() result ... |
||
Linus Torvalds
|
8e61e7b5c4 |
sound updates for 4.21
There are no intensive changes in both ALSA and ASoC core parts while rather most of changes are a bunch of driver fixes and updates. A large diff pattern appears in ASoC TI part which now merges both OMAP and DaVinci stuff, but the rest spreads allover the places. Note that this pull request includes also some updates for LED trigger and platform drivers for mute LEDs, appearing in the diffstat as well. Some highlights: ASoC: - Preparatory work for merging the audio-graph and audio-graph-scu cards - A merge of TI OMAP and DaVinci directories, as both product lines get merged together. Also including a few architecture changes as well. - Major cleanups of the Maxim MAX9867 driver - Small fixes for tablets & co with Intel BYT/CHT chips - Lots of rsnd updates as usual - Support for Asahi Kaesi AKM4118, AMD ACP3x, Intel platforms with RT5660, Meson AXG S/PDIF inputs, several Qualcomm IPs and Xilinx I2S controllers HD-audio: - Introduce audio-mute LED trigger for replacing the former hackish dynamic binding - Huawei WMI hotkey and mute LED support - Refactoring of PM code and display power controls - Headset button support in the generic jack code - A few updates for Tegra - Fixups for HP EliteBook and ASUS UX391UA - Lots of updates for Intel ASoC HD-audio, including the improved DSP detection and the fallback binding from ASoC SST to legacy HD-audio controller drivers Others: - Updates for FireWire TASCAM and Fireface devices, some other fixes - A few potential Spectre v1 fixes that are all trivial -----BEGIN PGP SIGNATURE----- iQJCBAABCAAsFiEEIXTw5fNLNI7mMiVaLtJE4w1nLE8FAlwbbCIOHHRpd2FpQHN1 c2UuZGUACgkQLtJE4w1nLE+RoQ//TNKliUP3bOv4BdnSmUHcCSAP3st96Ror5lC+ RZ103UyjlCsfa7hSPfH7/4WHAjk7wXYdazjA3m2swsxsbcjPMW4uBIBJlegQNM/9 PmNt4y60UgdgMCT/uu10BlEO8GsqBkRpxFYHtUJ3Lq6h9ECa+VDLazNjK9jABItK BVG668/LZp0le94cnJsLICmZ7fwKpAvi58hOsgOJLrPP4gzSGTj1gJXw/yyZ99QC MPLVj1PruXq1l8zfxM+MUuOa7hayafx64bCbftlITPonWfEr7OvBCQ7Vf9HqzJIJ OzEXAclVSc89R7RQT2omPiRKC7AyL85M9PCkpTtXh2D7DGXw9CFj5IDL6eIC4Ip4 sycArLOo6LA8ZYu45zCiY3rfh9Hx0Zn2qHz3qJeQtBrv5XYULuf6ZNwq6xJDEUz/ jxS558wSGHYWAyjv/IaPha1+JD6Us7zkSQgum+/qqnYYnYlDyxXnBatj4HzWZP/M Khuhj+k+Y8UXK1MbRiekVCGIwCHGf3cUv4H7tq+qpEzvJZwTFnOBh7/twVL8gN96 x4ozZogaiaenZwlEZlkzowAMBBYMYb537Y+Y5suxzWGz3HN/Z8raaL8GTkIIB/BO bNprJtPR8GJLfdu8NE++dUR2VuHfMnWat+frXk0eAsWutoviRyB4JLCRppfpgrA/ vDhIreU= =SG61 -----END PGP SIGNATURE----- Merge tag 'sound-4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "There are no intensive changes in both ALSA and ASoC core parts while rather most of changes are a bunch of driver fixes and updates. A large diff pattern appears in ASoC TI part which now merges both OMAP and DaVinci stuff, but the rest spreads allover the places. Note that this pull request includes also some updates for LED trigger and platform drivers for mute LEDs, appearing in the diffstat as well. Some highlights: ASoC: - Preparatory work for merging the audio-graph and audio-graph-scu cards - A merge of TI OMAP and DaVinci directories, as both product lines get merged together. Also including a few architecture changes as well. - Major cleanups of the Maxim MAX9867 driver - Small fixes for tablets & co with Intel BYT/CHT chips - Lots of rsnd updates as usual - Support for Asahi Kaesi AKM4118, AMD ACP3x, Intel platforms with RT5660, Meson AXG S/PDIF inputs, several Qualcomm IPs and Xilinx I2S controllers HD-audio: - Introduce audio-mute LED trigger for replacing the former hackish dynamic binding - Huawei WMI hotkey and mute LED support - Refactoring of PM code and display power controls - Headset button support in the generic jack code - A few updates for Tegra - Fixups for HP EliteBook and ASUS UX391UA - Lots of updates for Intel ASoC HD-audio, including the improved DSP detection and the fallback binding from ASoC SST to legacy HD-audio controller drivers Others: - Updates for FireWire TASCAM and Fireface devices, some other fixes - A few potential Spectre v1 fixes that are all trivial" * tag 'sound-4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (280 commits) ALSA: HD-Audio: SKL+: force HDaudio legacy or SKL+ driver selection ALSA: HD-Audio: SKL+: abort probe if DSP is present and Skylake driver selected ALSA: HDA: export process_unsol_events() ALSA: hda/realtek: Enable audio jacks of ASUS UX391UA with ALC294 ALSA: bebob: fix model-id of unit for Apogee Ensemble ALSA: emu10k1: Fix potential Spectre v1 vulnerabilities ALSA: rme9652: Fix potential Spectre v1 vulnerability ASoC: ti: Kconfig: Remove the deprecated options ARM: davinci_all_defconfig: Update the audio options ARM: omap1_defconfig: Do not select ASoC by default ARM: omap2plus_defconfig: Update the audio options ARM: davinci: dm365-evm: Update for the new ASoC Kcofnig options ARM: OMAP2: Update for new MCBSP Kconfig option ARM: OMAP1: Makefile: Update for new MCBSP Kconfig option MAINTAINERS: Add entry for sound/soc/ti and update the OMAP audio support ASoC: ti: Merge davinci and omap directories ALSA: hda: add mute LED support for HP EliteBook 840 G4 ALSA: fireface: code refactoring to handle model-specific registers ALSA: fireface: add support for packet streaming on Fireface 800 ALSA: fireface: allocate isochronous resources in mode-specific implementation ... |
||
Linus Torvalds
|
996680d461 |
media fixes for v4.20-rc8
-----BEGIN PGP SIGNATURE----- iQIcBAABAgAGBQJcG4weAAoJEAhfPr2O5OEVMu8P/j5a3+qringy/94NgmpHBQop aOACNWTRE746CG8T0yKgHV13iiLTHhlVxrRfhADKomWFit0DOiE2G1QXDsw6jptl gfMKMz3tE7MNOt0E+1tFzkezduJ7TIvFw9rorJ9MuACr9RGc+jMc+8muu1Uhu+fS JArKYrn1xlBEP9k2pcgbxFIjzdRr1jEJ9MCdyxybaU4QWyH4rUq0u+i6RJ2JlLcV urXGeDaNwgq7uTcOdUIwcbB0lKCi3hhkuPyl850IaQHWkR1cIzRoMWk5ilW9YYR3 8zDix9hORmPAdRIwhj0kJElTLZlTzF/u4+1fARmwKJlOYnAfRzSyFhC5P4huvmeA 6KXP1jg3OcyU5mB/Ys0YpZDhUtlhpRmMCMKtZW0x4BPpYTfRkAz6almUM6kIyaKp Dv1cp4UJ8SGpqVxEFBSr6qPsoO0by8jdkgRsupaCn6tAtkG7VXDGR8yhzZB8Leai pdCXP/7Z5t3kWI0XceVlpgOjkC7qLbEQKLDk0dqg0XqFLEuXm7sifLGamGhqubVy BmRPzH9oVISutmM/8DL8MHBkAv5IESF1lwhOzM75LTtA7aDaBuHS6zRhh45VtdJx r8/+R9KEvKdWTFgnRpvaERJk64I0hU44gmPLOtt/kkCfaTOonbhIsZ55uZxKjkqg rHPVHJORalrJGy9Hnhpl =uZDa -----END PGP SIGNATURE----- Merge tag 'media/v4.20-7' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull more media updates from Mauro Carvalho Chehab: "The Intel IPU3 camera driver" * tag 'media/v4.20-7' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (23 commits) media: staging/ipu3-imgu: Add MAINTAINERS entry media: staging/ipu3-imgu: Address documentation comments media: v4l: Add Intel IPU3 meta buffer formats media: doc-rst: Add Intel IPU3 documentation media: ipu3-imgu: Fix firmware binary location media: ipu3-imgu: Fix compiler warnings media: staging/intel-ipu3: Add dual pipe support media: staging/intel-ipu3: Add Intel IPU3 meta data uAPI media: staging/intel-ipu3: Add imgu top level pci device driver media: staging/intel-ipu3: Add v4l2 driver based on media framework media: staging/intel-ipu3: Add css pipeline programming media: staging/intel-ipu3: css: Initialize css hardware media: staging/intel-ipu3: css: Compute and program ccs media: staging/intel-ipu3: css: Add static settings for image pipeline media: staging/intel-ipu3: css: Add support for firmware management media: staging/intel-ipu3: css: Add dma buff pool utility functions media: staging/intel-ipu3: Implement DMA mapping functions media: staging/intel-ipu3: mmu: Implement driver media: staging/intel-ipu3: abi: Add structs media: staging/intel-ipu3: abi: Add register definitions and enum ... |
||
Linus Torvalds
|
5813540b58 |
media fixes for v4.20-rc8
-----BEGIN PGP SIGNATURE----- iQIcBAABAgAGBQJcG4K3AAoJEAhfPr2O5OEV7r4P/iRRCZ1aBbImMW+mPD5fhmhj FmQod3njuaVQzjBizPexEvmQ6Qz4vSr1JnpiKTPaYOlooOtT4TNAw7Hx/6SdCLkl a1+T0ads5FGQGMKQ/xQ+/dnp8UDdhllKYR+aVilfHpnZcltLtydtnhqYDZi98PRQ 2XYPCX5wRIDoJ5HKb1KygpGt4wxU1Re08X0ZDokPzN5DCQ3HGzs/SPOA8WPIo4kc rxT3QivhsfSVPX+Bu7UrurskvZ4cOvii1sXtxMWvsanDoDfY+XUPvSBL9syU6hzF KFdbIJNDQDy5m87crrZmOwHygj2nzJubpbdE3m5ulDRUvc1f4FYDeqdn5GJZ8fzQ 32+NFCboupZaJdfKWl1DtM8E6vlqiEa5/Xnkw5CEQ0mt6VmVob+YlmH8iLyxDZ7L c49r/k4UqbrsP/sgwi7mAbwFrNmve5ZPVBJKgcu+W1x3U8j+r3MBb2G+rFT0Mimx Z6IKS0KuOXIoOS71ADL+6Z6KmczvZGgMVpSaSl1IAZw/xAY8JCYqcyPCvtBYM3N6 6iRC4uET9KxbIdyPz0cbyLvdhdTTiBMQFEHzYBH0AwFJhWYFqilmetNu5MjLo6hb 0BHM5FOhpyxDmL1bKNvFNb8T8SbpDraWvbTso2XFhAl1kTWpA7yRZlSqcFBU7M22 wgc/mwBUJoGzZBHizyp6 =G3om -----END PGP SIGNATURE----- Merge tag 'media/v4.20-6' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: "First set of media patches contains: - Three new platform drivers: aspeed-video seco-sed and sun5i-csi; - One new sensor driver: imx214; - Support for Xbox DVD Movie Playback kit remote controller; - Removal of the legacy friio driver. The functionalities were ported to another driver, already merged; - New staging driver: Rockchip VPU; - Added license text or SPDX tags to all media documentation files; - Usual set of cleanup, fixes and enhancements" * tag 'media/v4.20-6' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (263 commits) media: cx23885: only reset DMA on problematic CPUs media: ddbridge: Move asm includes after linux ones media: drxk_hard: check if parameter is not NULL media: docs: fix some GPL licensing ambiguity at the text media: platform: Add Aspeed Video Engine driver media: dt-bindings: media: Add Aspeed Video Engine binding documentation media: vimc: fix start stream when link is disabled media: v4l2-device: Link subdevices to their parent devices if available media: siano: Use kmemdup instead of duplicating its function media: rockchip vpu: remove some unused vars media: cedrus: don't initialize pointers with zero media: cetrus: return an error if alloc fails media: cedrus: Add device-tree compatible and variant for A64 support media: cedrus: Add device-tree compatible and variant for H5 support media: dt-bindings: media: cedrus: Add compatibles for the A64 and H5 media: video-i2c: check if chip struct has set_power function media: video-i2c: support runtime PM media: staging: media: imx: Use of_node_name_eq for node name comparisons media: v4l2-subdev: document controls need _FL_HAS_DEVNODE media: vivid: Improve timestamping ... |
||
Linus Torvalds
|
eaa7649971 |
SPI NOR Changes
Core changes: - Parse the 4BAIT SFDP section - Add a bunch of SPI NOR entries to the flash_info table - Add the concept of SFDP fixups and use it to fix a bug on MX25L25635F - A bunch of minor cleanups/comestic changes NAND changes: NAND core changes: - kernel-doc miscellaneous fixes. - Third batch of fixes/cleanup to the raw NAND core impacting various controller drivers (ams-delta, marvell, fsmc, denali, tegra, vf610): * Stopping to pass mtd_info objects to internal functions * Reorganizing code to avoid forward declarations * Dropping useless test in nand_legacy_set_defaults() * Moving nand_exec_op() to internal.h * Adding nand_[de]select_target() helpers * Passing the CS line to be selected in struct nand_operation * Making ->select_chip() optional when ->exec_op() is implemented * Deprecating the ->select_chip() hook * Moving the ->exec_op() method to nand_controller_ops * Moving ->setup_data_interface() to nand_controller_ops * Deprecating the dummy_controller field * Fixing JEDEC detection * Providing a helper for polling GPIO R/B pin Raw NAND chip drivers changes: - Macronix: * Flagging 1.8V AC chips with a broken GET_FEATURES(TIMINGS) Raw NAND controllers drivers changes: - Ams-delta: * Fixing the error path * SPDX tag added * May be compiled with COMPILE_TEST=y * Conversion to ->exec_op() interface * Dropping .IOADDR_R/W use * Use GPIO API for data I/O - Denali: * Removing denali_reset_banks() * Removing ->dev_ready() hook * Including <linux/bits.h> instead of <linux/bitops.h> * Changes to comply with the above fixes/cleanup done in the core. - FSMC: * Adding an SPDX tag to replace the license text * Making conversion from chip to fsmc consistent * Fixing unchecked return value in fsmc_read_page_hwecc * Changes to comply with the above fixes/cleanup done in the core. - Marvell: * Preventing timeouts on a loaded machine (fix) * Changes to comply with the above fixes/cleanup done in the core. - OMAP2: * Pass the parent of pdev to dma_request_chan() (fix) - R852: * Use generic DMA API - sh_flctl: * Converting to SPDX identifiers - Sunxi: * Write pageprog related opcodes to the right register: WCMD_SET (fix) - Tegra: * Stop implementing ->select_chip() - VF610: * Adding an SPDX tag to replace the license text * Changes to comply with the above fixes/cleanup done in the core. - Various trivial/spelling/coding style fixes. SPI-NAND drivers changes: - Removing the depreacated mt29f_spinand driver from staging. - Adding support for: * Toshiba TC58CVG2S0H * GigaDevice GD5FxGQ4xA * Winbond W25N01GV JFFS2 changes: - Fix a lockdep issue MTD changes: - Rework the physmap driver to merge gpio-addr-flash and physmap_of in it - Add a new compatible for RedBoot partitions - Make sub-partitions RW if the parent partition was RO because of a mis-alignment - Add pinctrl support to the - Addition of /* fall-through */ comments where appropriate - Various minor fixes and cleanups Other changes: - Update my email address -----BEGIN PGP SIGNATURE----- iQJQBAABCgA6FiEEKmCqpbOU668PNA69Ze02AX4ItwAFAlwZRoocHGJvcmlzLmJy ZXppbGxvbkBib290bGluLmNvbQAKCRBl7TYBfgi3ALhmEACGoyJLVxRsE0yXOex7 JdPhZxnOkwnzaxQPQBQ7pFrWvRinV1Th8JenCCLiyM6DBcIDRo/87etC6cnjfnH/ eJ8e7xPLiESCsAB8xixP1YvLaZQzjBKOH/+qNR6anp505ZNKhgsuUDATLSFfaEvz bZv3f1V70dPXdEK/3QXDZakqVtfvVBMSdyJMWdKSdVn70yA72wCPP4igcGdfYfoZ KKaanhS1EdxA++WFrRqocQay9rtjnFGONHLfrefop9YKSevLp1UDZSAYSk4CHcEf yaMFD+qlxc0wHlOk4XyDY3vREcdO50r2vXfN/Hxf0D6JeC/6RT0Hrm0YyY8X/u7l xLhSv+DKGyft3SnQ4MDdwg57bvDSOkPryI3cxBul3S6I00pCdo8l5zQskezDbk0E CkUuB+f7Wn3lmV7W8ZNbYHx0ljVJEXMxEQ6m/6ZLizIr/aC7m5ncgv8a3mL7QQQA KXuLamw9pPlf/tAOQxB1PTiE1n8ECYqcInJXzoxaRzUdn8TlIYjxUb7GIDoOFpzm 6a3oCx6tUZq4j/GAoyYgo12NhH0aYW3X/V8N7SfPjmIofvFiUL1y1VQ2ghNDLCqH 2cz6WsFGoA0oSVnxl/TSSM6/ZXbvnLgM4zq6+wZITyCFNwyC956MddZrjL6lVkMT s6kvh/h3wBWN+GxwlDeY+KZMlQ== =myqK -----END PGP SIGNATURE----- Merge tag 'mtd/for-4.21' of git://git.infradead.org/linux-mtd Pull mtd updates from Boris Brezillon: "SPI NOR Core changes: - Parse the 4BAIT SFDP section - Add a bunch of SPI NOR entries to the flash_info table - Add the concept of SFDP fixups and use it to fix a bug on MX25L25635F - A bunch of minor cleanups/comestic changes NAND core changes: - kernel-doc miscellaneous fixes. - Third batch of fixes/cleanup to the raw NAND core impacting various controller drivers (ams-delta, marvell, fsmc, denali, tegra, vf610): * Stop to pass mtd_info objects to internal functions * Reorganize code to avoid forward declarations * Drop useless test in nand_legacy_set_defaults() * Move nand_exec_op() to internal.h * Add nand_[de]select_target() helpers * Pass the CS line to be selected in struct nand_operation * Make ->select_chip() optional when ->exec_op() is implemented * Deprecate the ->select_chip() hook * Move the ->exec_op() method to nand_controller_ops * Move ->setup_data_interface() to nand_controller_ops * Deprecate the dummy_controller field * Fix JEDEC detection * Provide a helper for polling GPIO R/B pin Raw NAND chip drivers changes: - Macronix: * Flag 1.8V AC chips with a broken GET_FEATURES(TIMINGS) Raw NAND controllers drivers changes: - Ams-delta: * Fix the error path * SPDX tag added * May be compiled with COMPILE_TEST=y * Conversion to ->exec_op() interface * Drop .IOADDR_R/W use * Use GPIO API for data I/O - Denali: * Remove denali_reset_banks() * Remove ->dev_ready() hook * Include <linux/bits.h> instead of <linux/bitops.h> * Changes to comply with the above fixes/cleanup done in the core. - FSMC: * Add an SPDX tag to replace the license text * Make conversion from chip to fsmc consistent * Fix unchecked return value in fsmc_read_page_hwecc * Changes to comply with the above fixes/cleanup done in the core. - Marvell: * Prevent timeouts on a loaded machine (fix) * Changes to comply with the above fixes/cleanup done in the core. - OMAP2: * Pass the parent of pdev to dma_request_chan() (fix) - R852: * Use generic DMA API - sh_flctl: * Convert to SPDX identifiers - Sunxi: * Write pageprog related opcodes to the right register: WCMD_SET (fix) - Tegra: * Stop implementing ->select_chip() - VF610: * Add an SPDX tag to replace the license text * Changes to comply with the above fixes/cleanup done in the core. - Various trivial/spelling/coding style fixes. SPI-NAND drivers changes: - Remove the depreacated mt29f_spinand driver from staging. - Add support for: * Toshiba TC58CVG2S0H * GigaDevice GD5FxGQ4xA * Winbond W25N01GV JFFS2 changes: - Fix a lockdep issue MTD changes: - Rework the physmap driver to merge gpio-addr-flash and physmap_of in it - Add a new compatible for RedBoot partitions - Make sub-partitions RW if the parent partition was RO because of a mis-alignment - Add pinctrl support to the - Addition of /* fall-through */ comments where appropriate - Various minor fixes and cleanups Other changes: - Update my email address" * tag 'mtd/for-4.21' of git://git.infradead.org/linux-mtd: (108 commits) mtd: rawnand: sunxi: Write pageprog related opcodes to WCMD_SET MAINTAINERS: Update my email address mtd: rawnand: marvell: prevent timeouts on a loaded machine mtd: rawnand: omap2: Pass the parent of pdev to dma_request_chan() mtd: rawnand: Fix JEDEC detection mtd: spi-nor: Add support for is25lp016d mtd: spi-nor: parse SFDP 4-byte Address Instruction Table mtd: spi-nor: Add 4B_OPCODES flag to is25lp256 mtd: spi-nor: Add an SPDX tag to spi-nor.{c,h} mtd: spi-nor: Make the enable argument passed to set_byte() a bool mtd: spi-nor: Stop passing flash_info around mtd: spi-nor: Avoid forward declaration of internal functions mtd: spi-nor: Drop inline on all internal helpers mtd: spi-nor: Add a post BFPT fixup for MX25L25635E mtd: spi-nor: Add a post BFPT parsing fixup hook mtd: spi-nor: Add the SNOR_F_4B_OPCODES flag mtd: spi-nor: cast to u64 to avoid uint overflows mtd: spi-nor: Add support for IS25LP032/064 mtd: spi-nor: add entry for mt35xu512aba flash mtd: spi-nor: add macros related to MICRON flash ... |
||
Linus Torvalds
|
b3cc2bfe72 |
Add initial support for I3C along with 2 I3C master controller drivers.
-----BEGIN PGP SIGNATURE----- iQJQBAABCgA6FiEEKmCqpbOU668PNA69Ze02AX4ItwAFAlwaZvIcHGJvcmlzLmJy ZXppbGxvbkBib290bGluLmNvbQAKCRBl7TYBfgi3APnqD/9gM5jqbApG264chvyh 5snevHVwSeXFng1DhulfEB4g+48fNx3vu2dC9cgXLuFpTeCTcW3JktsQBJHEGix7 Az+NrQW5ddTOQ1iHX+ojSTkzFs6lUX/rnEZ8avDTcvaMMk+R30OLPYq4SJKhGejq eyfCq2i8DqXp6Jy00RpE3XvsRa4Yg20FCg6ulCMv/iYH5xlkTGCz7TmxBN6hqSZQ +/C78yvS8dljY9JzLNW/h8C+VXB5ZLscxhHRjjawAHGx+QkSFieFpr/7bYt3hJkP lN1iBEm2pFmRSsP0aHrfrl3VIXx8g3WHF7fdu2nFnA4aGlyTsmWaCD7lly/uVSkm pynTsuq4rFSrkQerteYRFwqw3RaS5vrIkJYP2vTCoM5Lguav0yb284FjKBIf/I1q I7vF7cRr6AeQW/1wbXDbAsgPJutxQkvVMgKWao+sUw8llc37N50e3WONfNxRujrN 2P2sOtDjEQnh6PKAeskexDhDVJe4k2Oo7oKFj0sFxJ+4GYQgFAtzXB0d6OhtOakh UzhESyTWkL4dv7fMBdC8lsWXI04BWGtpf2jfq+Nko9qQr91ds1Sh3FNwEuMuaQx0 UxKO6G3Mx0kPUbLSG0yLwpvJtqFN/02H8HZndKeDhYSktPqKRhVmLcxjFf419OYV fiAUqG54hbkPQbswgXFupsw7wg== =lXwz -----END PGP SIGNATURE----- Merge tag 'i3c/for-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux Pull initial i3c support from Boris Brezillon: "Add initial support for I3C along with two I3C master controller drivers" * tag 'i3c/for-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux: i3c: master: cdns: fix I2C transfers in Cadence I3C master driver ic3: off by one in mode_show() i3c: fix an error code in i3c_master_add_i3c_dev_locked() i3c: master: dw: fix mask operation by using the correct operator MAINTAINERS: Add myself as the dw-i3c-master module maintainer dt-binding: i3c: Document Synopsys DesignWare I3C i3c: master: Add driver for Synopsys DesignWare IP i3c: master: Remove set but not used variable 'old_i3c_scl_lim' dt-bindings: i3c: Document Cadence I3C master bindings i3c: master: Add driver for Cadence IP MAINTAINERS: Add myself as the I3C subsystem maintainer dt-bindings: i3c: Document core bindings i3c: Add sysfs ABI spec docs: driver-api: Add I3C documentation i3c: Add core I3C infrastructure |
||
Linus Torvalds
|
4971f090aa |
drm pull request for 4.21-rc1
-----BEGIN PGP SIGNATURE----- iQIcBAABAgAGBQJcExwOAAoJEAx081l5xIa+euIP/1NZZvSB+bsCtOwDG8I6uWsS OU5JUZ8q2dqyyFagRxzlkeSt3uWJqKp5NyNwuc9z/5u6AGF+3/97D0J1lG6Os/st 4abF6NadivYJ4cXhJ1ddIHOFMVDcAsyMWNDb93NwPwncCsQ0jt5FFOsrCyj6BGY+ ihHFlHrIyDrbBGDHz+u1E/EO5WkNnaLDoC+/k2fTRWCNI3bQL3O+orsYTI6S2uvU lQJnRfYAllgLD2p1k/rrBHcHXBv50roR0e8uhGmbdhGdp5bEW30UGBLHXxQjjSVy fQCwFwTO8X6zoxU53Zbbk+MVrp+jkTHcGKViHRuLkaHzE5mX26UXDwlXdN32ZUbK yHOJp+uDaWXX7MIz0LsB9Iqj2+eIUoFaIJMoZTMGVTNvqnTxKnoHnjAtbTH2u258 teFgmy4BIgPgo2kwEnBEZjCapou0Eivyut2wq8bTAB2Fe8LwURJpr3cioTtMLlUO L5/PoD27eFvBCAeFrQIwF3b2XiQEnBpXocmilEwP1xDMPgoyeePAfIF2iEpDvi0U jce3rLd2yVvo92xYUgoHkVTD8si/pKKnZ1D0U3+RI6pxK6s0HJEHjcNEMdvdm+2S 4qgvBQV3wlWFkXEK8PR5BHPoLntg18tKon/BTLBjgGkN9E1o9fWs1/s6KQGY4xdo l3Vvfx2LTdkgEoBssSwB =wh4W -----END PGP SIGNATURE----- Merge tag 'drm-next-2018-12-14' of git://anongit.freedesktop.org/drm/drm Pull drm updates from Dave Airlie: "Core: - shared fencing staging removal - drop transactional atomic helpers and move helpers to new location - DP/MST atomic cleanup - Leasing cleanups and drop EXPORT_SYMBOL - Convert drivers to atomic helpers and generic fbdev. - removed deprecated obj_ref/unref in favour of get/put - Improve dumb callback documentation - MODESET_LOCK_BEGIN/END helpers panels: - CDTech panels, Banana Pi Panel, DLC1010GIG, - Olimex LCD-O-LinuXino, Samsung S6D16D0, Truly NT35597 WQXGA, - Himax HX8357D, simulated RTSM AEMv8. - GPD Win2 panel - AUO G101EVN010 vgem: - render node support ttm: - move global init out of drivers - fix LRU handling for ghost objects - Support for simultaneous submissions to multiple engines scheduler: - timeout/fault handling changes to help GPU recovery - helpers for hw with preemption support i915: - Scaler/Watermark fixes - DP MST + powerwell fixes - PSR fixes - Break long get/put shmemfs pages - Icelake fixes - Icelake DSI video mode enablement - Engine workaround improvements amdgpu: - freesync support - GPU reset enabled on CI, VI, SOC15 dGPUs - ABM support in DC - KFD support for vega12/polaris12 - SDMA paging queue on vega - More amdkfd code sharing - DCC scanout on GFX9 - DC kerneldoc - Updated SMU firmware for GFX8 chips - XGMI PSP + hive reset support - GPU reset - DC trace support - Powerplay updates for newer Polaris - Cursor plane update fast path - kfd dma-buf support virtio-gpu: - add EDID support vmwgfx: - pageflip with damage support nouveau: - Initial Turing TU104/TU106 modesetting support msm: - a2xx gpu support for apq8060 and imx5 - a2xx gpummu support - mdp4 display support for apq8060 - DPU fixes and cleanups - enhanced profiling support - debug object naming interface - get_iova/page pinning decoupling tegra: - Tegra194 host1x, VIC and display support enabled - Audio over HDMI for Tegra186 and Tegra194 exynos: - DMA/IOMMU refactoring - plane alpha + blend mode support - Color format fixes for mixer driver rcar-du: - R8A7744 and R8A77470 support - R8A77965 LVDS support imx: - fbdev emulation fix - multi-tiled scalling fixes - SPDX identifiers rockchip - dw_hdmi support - dw-mipi-dsi + dual dsi support - mailbox read size fix qxl: - fix cursor pinning vc4: - YUV support (scaling + cursor) v3d: - enable TFU (Texture Formatting Unit) mali-dp: - add support for linear tiled formats sun4i: - Display Engine 3 support - H6 DE3 mixer 0 support - H6 display engine support - dw-hdmi support - H6 HDMI phy support - implicit fence waiting - BGRX8888 support meson: - Overlay plane support - implicit fence waiting - HDMI 1.4 4k modes bridge: - i2c fixes for sii902x" * tag 'drm-next-2018-12-14' of git://anongit.freedesktop.org/drm/drm: (1403 commits) drm/amd/display: Add fast path for cursor plane updates drm/amdgpu: Enable GPU recovery by default for CI drm/amd/display: Fix duplicating scaling/underscan connector state drm/amd/display: Fix unintialized max_bpc state values Revert "drm/amd/display: Set RMX_ASPECT as default" drm/amdgpu: Fix stub function name drm/msm/dpu: Fix clock issue after bind failure drm/msm/dpu: Clean up dpu_media_info.h static inline functions drm/msm/dpu: Further cleanups for static inline functions drm/msm/dpu: Cleanup the debugfs functions drm/msm/dpu: Remove dpu_irq and unused functions drm/msm: Make irq_postinstall optional drm/msm/dpu: Cleanup callers of dpu_hw_blk_init drm/msm/dpu: Remove unused functions drm/msm/dpu: Remove dpu_crtc_is_enabled() drm/msm/dpu: Remove dpu_crtc_get_mixer_height drm/msm/dpu: Remove dpu_dbg drm/msm: dpu: Remove crtc_lock drm/msm: dpu: Remove vblank_requested flag from dpu_crtc drm/msm: dpu: Separate crtc assignment from vblank enable ... |
||
Linus Torvalds
|
c76cd634eb |
platform-drivers-x86 for v4.21-1
The USB Power Delivery discrete components now can be enumerated by i2c-multi-instantiate driver via several resources under single ACPI device node (ACPI ID is INT3515). Touchscreen support is added for the Mediacom Flexbook Edge 11. Mellanox driver got fixed due to updates in their firmware. The power management stub driver for AtomISP v2 is fixed in order to support Intel Baytrail SoCs where same quirk is needed for S0ix to work. Special key handling has been fixed for Favorites hotkey on Thinkpad, and Screen LOCK on ASUS. Ideapad Yoga 2 13 has no HW rfkill switch, thus, driver has been updated to support this. Few cleanups related to debugfs have been made in Intel IPS and Intel PMC drivers. Besides that Intel PMC has been extended to show more detailed information about Latency Tolerance. The following is an automated git shortlog grouped by driver: ACPI / scan: - Create platform device for INT3515 ACPI nodes Add the VLV ISP PCI ID to atomisp2_pm: - Add the VLV ISP PCI ID to atomisp2_pm asus-nb-wmi: - Drop mapping of 0x33 and 0x34 scan codes - Map 0x35 to KEY_SCREENLOCK asus-wmi: - Tell the EC the OS will handle the display off hotkey dell-laptop: - Mark expected switch fall-throughs Documentation/ABI: - Add new attribute for mlxreg-io sysfs interfaces Fix config space access for intel_atomisp2_pm: - Fix config space access for intel_atomisp2_pm i2c: - acpi: Introduce i2c_acpi_get_i2c_resource() helper - acpi: Use ACPI_FAILURE instead of !ACPI_SUCCESS - acpi: Return error pointers from i2c_acpi_new_device() i2c-multi-instantiate: - Allow to have same slaves - Introduce IOAPIC IRQ support - Distinguish IRQ resource type - Count I2cSerialBus() resources - Get rid of obsolete conditional - Defer probe when no adapter found - Accept errors of i2c_acpi_new_device() ideapad-laptop: - Add Yoga 2 13 to no_hw_rfkill list iio: - inv_mpu6050: Use i2c_acpi_get_i2c_resource() helper intel_cht_int33fe: - Get rid of obsolete conditional - Accept errors of i2c_acpi_new_device() - Remove duplicate NULL check intel_ips: - Convert to use DEFINE_SHOW_ATTRIBUTE macro - Remove never happen condition - NULL check before some freeing functions is not needed - remove unnecessary checks in ips_debugfs_init intel_pmc_core: - convert to DEFINE_SHOW_ATTRIBUTE - Decode Snoop / Non Snoop LTR - Fix LTR IGNORE Max offset - Show Latency Tolerance info intel_telemetry: - convert to DEFINE_SHOW_ATTRIBUTE mlx-platform: - Convert to use SPDX identifier - Allow mlxreg-io driver activation for new systems - Fix LED configuration - Fix tachometer registers - Rename new systems product names - Add definitions for new registers thinkpad_acpi: - Cleanup quirks macros - Change the keymap for Favorites hotkey touchscreen_dmi: - Add info for the Mediacom Flexbook Edge 11 -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEqaflIX74DDDzMJJtb7wzTHR8rCgFAlwRE+sACgkQb7wzTHR8 rCi7URAAgpfdsHUkj3PdFmp5o3LHCD0m5Z9A6yAJrXyhCDRRkAMaGYyRe4vg3qE1 GBA6MbMyOrtW/LqvaQAajeMmDINl1Mz/5OIVCIwJUPnKk8K7Yy93pH5vKecUPX8q ihItKmJIPdaqxH2LXrx6sh3Ob3QrVrcpfpW6109WM8auYB+BiNOhxejBZ4jvMiRd 9dG657gx64Y6Ot5kjGKpdblFrA930sA5kAiMFiCcjNP9S7xLhgfyZiPMSP48gUWb OiqoJMsomamF8qxZsZzfRblZpOlFahuW51D2vZgHb7N6fA0qW1c3twdSoivQfTHa KA+OuMgJ52vI8JDgUKj55LB88Pn5iFtmDsNodgQ25cBLgBkzKJQU9MfoK8QafvlV OTjmGL+ENK4VufDwMEgOMlXdihVewOrQ3kzOm7JQgIlOSWE7l9BSa2CK0vSM9Jha nfjjc5LowJaWA+QUrmx29VrRGmSYfrGhquGV/3U+TPafc5blpiqWTGxIkhaNFhKx 0yk/vzggGsIlvnYU2+zaJW8LAhLcb4R6ATEZMurZQdZlQefs+5oAEPSvOZ5gYdLX PWj3swTMkIp7FKjGm7532T83v5lJyO9cxSV/3aIqzkdWNqMoYDDuNU8wCzTTBv5m EoKQO+H2WCnlm5bgWQ82gjVDKmS63eDlT4WgYxm60OZ1ONuAwIo= =kYH6 -----END PGP SIGNATURE----- Merge tag 'platform-drivers-x86-v4.21-1' of git://git.infradead.org/linux-platform-drivers-x86 Pull x86 platform driver updates from Andy Shevchenko: - The USB Power Delivery discrete components now can be enumerated by i2c-multi-instantiate driver via several resources under single ACPI device node (ACPI ID is INT3515). - Touchscreen support is added for the Mediacom Flexbook Edge 11. - Mellanox driver got fixed due to updates in their firmware. - The power management stub driver for AtomISP v2 is fixed in order to support Intel Baytrail SoCs where same quirk is needed for S0ix to work. - Special key handling has been fixed for Favorites hotkey on Thinkpad, and Screen LOCK on ASUS. - Ideapad Yoga 2 13 has no HW rfkill switch, thus, driver has been updated to support this. - Few cleanups related to debugfs have been made in Intel IPS and Intel PMC drivers. Besides that Intel PMC has been extended to show more detailed information about Latency Tolerance * tag 'platform-drivers-x86-v4.21-1' of git://git.infradead.org/linux-platform-drivers-x86: (41 commits) platform/x86: mlx-platform: Convert to use SPDX identifier Documentation/ABI: Add new attribute for mlxreg-io sysfs interfaces platform/x86: mlx-platform: Allow mlxreg-io driver activation for new systems platform/x86: mlx-platform: Fix LED configuration platform/x86: mlx-platform: Fix tachometer registers platform/x86: mlx-platform: Rename new systems product names platform/x86: mlx-platform: Add definitions for new registers platform/x86: intel_telemetry: convert to DEFINE_SHOW_ATTRIBUTE platform/x86: intel_pmc_core: convert to DEFINE_SHOW_ATTRIBUTE platform/x86: thinkpad_acpi: Cleanup quirks macros platform/x86: touchscreen_dmi: Add info for the Mediacom Flexbook Edge 11 platform/x86: Fix config space access for intel_atomisp2_pm platform/x86: Add the VLV ISP PCI ID to atomisp2_pm platform/x86: intel_ips: Convert to use DEFINE_SHOW_ATTRIBUTE macro platform/x86: intel_ips: Remove never happen condition platform/x86: intel_ips: NULL check before some freeing functions is not needed platform/x86: intel_ips: remove unnecessary checks in ips_debugfs_init iio: inv_mpu6050: Use i2c_acpi_get_i2c_resource() helper ACPI / scan: Create platform device for INT3515 ACPI nodes platform/x86: i2c-multi-instantiate: Allow to have same slaves ... |
||
Fabrizio Castro
|
e94b815524 |
dt-bindings: pwm: rcar: Add r8a774c0 support
Document RZ/G2E (R8A774C0) SoC bindings. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Thierry Reding <thierry.reding@gmail.com> |
||
Michael Ellerman
|
12526b0d6c |
Merge branch 'next' of https://git.kernel.org/pub/scm/linux/kernel/git/scottwood/linux into next
Freescale updates from Scott: "Highlights include elimination of legacy clock bindings use from dts files, an 83xx watchdog handler, fixes to old dts interrupt errors, and some minor cleanup." |
||
Eric Biggers
|
c79b411eaa |
crypto: skcipher - remove remnants of internal IV generators
Remove dead code related to internal IV generators, which are no longer used since they've been replaced with the "seqiv" and "echainiv" templates. The removed code includes: - The "givcipher" (GIVCIPHER) algorithm type. No algorithms are registered with this type anymore, so it's unneeded. - The "const char *geniv" member of aead_alg, ablkcipher_alg, and blkcipher_alg. A few algorithms still set this, but it isn't used anymore except to show via /proc/crypto and CRYPTO_MSG_GETALG. Just hardcode "<default>" or "<none>" in those cases. - The 'skcipher_givcrypt_request' structure, which is never used. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> |
||
Yuantian Tang
|
a6ee0c00a7 |
clk: qoriq: add more compatibles strings
Add more SoC compatible strings to support more chips. Signed-off-by: Yuantian Tang <andy.tang@nxp.com> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Scott Wood <oss@buserror.net> |
||
Mark Brown
|
b27d9668be
|
Merge branch 'regulator-4.21' into regulator-next | ||
Rafael J. Wysocki
|
3a56fe685d |
Merge branches 'pm-cpuidle', 'pm-cpufreq' and 'pm-cpufreq-sched'
* pm-cpuidle: cpuidle: Add 'above' and 'below' idle state metrics cpuidle: big.LITTLE: fix refcount leak cpuidle: Add cpuidle.governor= command line parameter cpuidle: poll_state: Disregard disable idle states Documentation: admin-guide: PM: Add cpuidle document * pm-cpufreq: cpufreq: qcom-hw: Add support for QCOM cpufreq HW driver dt-bindings: cpufreq: Introduce QCOM cpufreq firmware bindings cpufreq: nforce2: Remove meaningless return cpufreq: ia64: Remove unused header files cpufreq: imx6q: save one condition block for normal case of nvmem read cpufreq: imx6q: remove unused code cpufreq: pmac64: add of_node_put() cpufreq: powernv: add of_node_put() Documentation: intel_pstate: Clarify coordination of P-State limits cpufreq: intel_pstate: Force HWP min perf before offline cpufreq: s3c24xx: Change to use DEFINE_SHOW_ATTRIBUTE macro * pm-cpufreq-sched: sched/cpufreq: Add the SPDX tags |
||
David S. Miller
|
c3e5336925 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-next
Pablo Neira Ayuso says: ==================== Netfilter updates for net-next The following patchset contains Netfilter updates for net-next: 1) Support for destination MAC in ipset, from Stefano Brivio. 2) Disallow all-zeroes MAC address in ipset, also from Stefano. 3) Add IPSET_CMD_GET_BYNAME and IPSET_CMD_GET_BYINDEX commands, introduce protocol version number 7, from Jozsef Kadlecsik. A follow up patch to fix ip_set_byindex() is also included in this batch. 4) Honor CTA_MARK_MASK from ctnetlink, from Andreas Jaggi. 5) Statify nf_flow_table_iterate(), from Taehee Yoo. 6) Use nf_flow_table_iterate() to simplify garbage collection in nf_flow_table logic, also from Taehee Yoo. 7) Don't use _bh variants of call_rcu(), rcu_barrier() and synchronize_rcu_bh() in Netfilter, from Paul E. McKenney. 8) Remove NFC_* cache definition from the old caching infrastructure. 9) Remove layer 4 port rover in NAT helpers, use random port instead, from Florian Westphal. 10) Use strscpy() in ipset, from Qian Cai. 11) Remove NF_NAT_RANGE_PROTO_RANDOM_FULLY branch now that random port is allocated by default, from Xiaozhou Liu. 12) Ignore NF_NAT_RANGE_PROTO_RANDOM too, from Florian Westphal. 13) Limit port allocation selection routine in NAT to avoid softlockup splats when most ports are in use, from Florian. 14) Remove unused parameters in nf_ct_l4proto_unregister_sysctl() from Yafang Shao. 15) Direct call to nf_nat_l4proto_unique_tuple() instead of indirection, from Florian Westphal. 16) Several patches to remove all layer 4 NAT indirections, remove nf_nat_l4proto struct, from Florian Westphal. 17) Fix RTP/RTCP source port translation when SNAT is in place, from Alin Nastac. 18) Selective rule dump per chain, from Phil Sutter. 19) Revisit CLUSTERIP target, this includes a deadlock fix from netns path, sleep in atomic, remove bogus WARN_ON_ONCE() and disallow mismatching IP address and MAC address. Patchset from Taehee Yoo. 20) Update UDP timeout to stream after 2 seconds, from Florian. 21) Shrink UDP established timeout to 120 seconds like TCP timewait. 22) Sysctl knobs to set GRE timeouts, from Yafang Shao. 23) Move seq_print_acct() to conntrack core file, from Florian. 24) Add enum for conntrack sysctl knobs, also from Florian. 25) Place nf_conntrack_acct, nf_conntrack_helper, nf_conntrack_events and nf_conntrack_timestamp knobs in the core, from Florian Westphal. As a side effect, shrink netns_ct structure by removing obsolete sysctl anchors, also from Florian. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> |
||
David S. Miller
|
e69fbf31ca |
wireless-drivers-next patches for 4.21
Last set of patches for 4.21. mt76 is still in very active development and having some refactoring as well as new features. But also other drivers got few new features and fixes. Major changes: ath10k * add amsdu support for QCA6174 monitor mode * report tx rate using the new ieee80211_tx_rate_update() API * wcn3990 support is not experimental anymore iwlwifi * support for FW version 43 for 9000 and 22000 series brcmfmac * add support for CYW43012 SDIO chipset * add the raw 4354 PCIe device ID for unprogrammed Cypress boards mwifiex * add NL80211_STA_INFO_RX_BITRATE support mt76 * use the same firmware for mt76x2e and mt76x2u * mt76x0e survey support * more unification between mt76x2 and mt76x0 * mt76x0e AP mode support * mt76x0e DFS support * rework and fix tx status handling for mt76x0 and mt76x2 -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQEcBAABAgAGBQJcG9TEAAoJEG4XJFUm622byW8H/1vMVJhXwgIZbHeoUKNa47Yp Z7Jv5vW8IGXu+lp7DyoedDCbq4+lskNSlDV1DmysNChLgDnApU/3oCd/jH8EiGPV JAFUHb85HuVLTTpPpNHtnYz3IzL7r098TNVxOU0VD+xILM0Mf0aCeXztgmFWpGaY /rfHkId8oKUezIjdu6Dc96mqITrT6WRNtnOMfjr6dZPjClRTS44Hyz3Ga3rXABBL /n8BCkl0GpKGrL3mBy2CCR5mVY8zfxMB4Aj2zx7bccZ8i2i2QjrGlXCHyB6ImNrR lv4L1fUVXZWVdeOe8EbpftY7zEsPrX+XNm6h1kckdB7UyuBROpQLsVb+yxlLh9g= =mhAw -----END PGP SIGNATURE----- Merge tag 'wireless-drivers-next-for-davem-2018-12-20' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for 4.21 Last set of patches for 4.21. mt76 is still in very active development and having some refactoring as well as new features. But also other drivers got few new features and fixes. Major changes: ath10k * add amsdu support for QCA6174 monitor mode * report tx rate using the new ieee80211_tx_rate_update() API * wcn3990 support is not experimental anymore iwlwifi * support for FW version 43 for 9000 and 22000 series brcmfmac * add support for CYW43012 SDIO chipset * add the raw 4354 PCIe device ID for unprogrammed Cypress boards mwifiex * add NL80211_STA_INFO_RX_BITRATE support mt76 * use the same firmware for mt76x2e and mt76x2u * mt76x0e survey support * more unification between mt76x2 and mt76x0 * mt76x0e AP mode support * mt76x0e DFS support * rework and fix tx status handling for mt76x0 and mt76x2 ==================== Signed-off-by: David S. Miller <davem@davemloft.net> |
||
Mahesh Salgaonkar
|
a4e92ce8e4 |
powerpc/fadump: Reservationless firmware assisted dump
One of the primary issues with Firmware Assisted Dump (fadump) on Power is that it needs a large amount of memory to be reserved. On large systems with TeraBytes of memory, this reservation can be quite significant. In some cases, fadump fails if the memory reserved is insufficient, or if the reserved memory was DLPAR hot-removed. In the normal case, post reboot, the preserved memory is filtered to extract only relevant areas of interest using the makedumpfile tool. While the tool provides flexibility to determine what needs to be part of the dump and what memory to filter out, all supported distributions default this to "Capture only kernel data and nothing else". We take advantage of this default and the Linux kernel's Contiguous Memory Allocator (CMA) to fundamentally change the memory reservation model for fadump. Instead of setting aside a significant chunk of memory nobody can use, this patch uses CMA instead, to reserve a significant chunk of memory that the kernel is prevented from using (due to MIGRATE_CMA), but applications are free to use it. With this fadump will still be able to capture all of the kernel memory and most of the user space memory except the user pages that were present in CMA region. Essentially, on a P9 LPAR with 2 cores, 8GB RAM and current upstream: [root@zzxx-yy10 ~]# free -m total used free shared buff/cache available Mem: 7557 193 6822 12 541 6725 Swap: 4095 0 4095 With this patch: [root@zzxx-yy10 ~]# free -m total used free shared buff/cache available Mem: 8133 194 7464 12 475 7338 Swap: 4095 0 4095 Changes made here are completely transparent to how fadump has traditionally worked. Thanks to Aneesh Kumar and Anshuman Khandual for helping us understand CMA and its usage. TODO: - Handle case where CMA reservation spans nodes. Signed-off-by: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by: Hari Bathini <hbathini@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> |
||
Yafang Shao
|
a0badcc665 |
netfilter: conntrack: register sysctl table for gre
This patch adds two sysctl knobs for GRE: net.netfilter.nf_conntrack_gre_timeout = 30 net.netfilter.nf_conntrack_gre_timeout_stream = 180 Update the Documentation as well. Signed-off-by: Yafang Shao <laoar.shao@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> |
||
Florian Westphal
|
294304e4c5 |
netfilter: conntrack: udp: set stream timeout to 2 minutes
We have no explicit signal when a UDP stream has terminated, peers just stop sending. For suspected stream connections a timeout of two minutes is sane to keep NAT mapping alive a while longer. It matches tcp conntracks 'timewait' default timeout value. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> |
||
David S. Miller
|
6eea2db210 |
Merge branch '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue
Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates 2018-12-20 This series contains updates to e100, igb, ixgbe, i40e and ice drivers. I replaced spinlocks for mutex locks to reduce the latency on CPU0 for igb when updating the statistics. This work was based off a patch provided by Jan Jablonsky, which was against an older version of the igb driver. Jesus adjusts the receive packet buffer size from 32K to 30K when running in QAV mode, to stay within 60K for total packet buffer size for igb. Vinicius adds igb kernel documentation regarding the CBS algorithm and its implementation in the i210 family of NICs. YueHaibing from Huawei fixed the e100 driver that was potentially passing a NULL pointer, so use the kernel macro IS_ERR_OR_NULL() instead. Konstantin Khorenko fixes i40e where we were not setting up the neigh_priv_len in our net_device, which caused the driver to read beyond the neighbor entry allocated memory. Miroslav Lichvar extends the PTP gettime() to read the system clock by adding support for PTP_SYS_OFFSET_EXTENDED ioctl in i40e. Young Xiao fixed the ice driver to only enable NAPI on q_vectors that actually have transmit and receive rings. Kai-Heng Feng fixes an igb issue that when placed in suspend mode, the NIC does not wake up when a cable is plugged in. This was due to the driver not setting PME during runtime suspend. Stephen Douthit enables the ixgbe driver allow DSA devices to use the MII interface to talk to switches. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> |
||
David S. Miller
|
2be09de7d6 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Lots of conflicts, by happily all cases of overlapping changes, parallel adds, things of that nature. Thanks to Stephen Rothwell, Saeed Mahameed, and others for their guidance in these resolutions. Signed-off-by: David S. Miller <davem@davemloft.net> |
||
Vinicius Costa Gomes
|
bad87ee82f |
Documentation: igb: Add a section about CBS
Add some pointers to the definition of the CBS algorithm, and some notes about the limits of its implementation in the i210 family of controllers. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> |
||
Bhagavathi Perumal S
|
f3f587995c |
dt-bindings: net: ath10k: add new dt entry to identify external FEM
This adds new dt entry ext-fem-name, it is used by ath10k driver to select correct timing parameters and configure it in target wifi hardware. The Front End Module(FEM) normally includes tx power amplifier(PA) and rx low noise amplifier(LNA). The default timing parameters like tx end to PA off timing values were fine tuned for internal FEM used in reference design. And these timing values can not be same if ODM modifies hardware design with different external FEM. This DT entry helps to choose correct timing values in driver if different external FEM hardware used. Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> |
||
Bhagavathi Perumal S
|
e5404969a3 |
dt-bindings: net: ath10k: fix node name and device type in qcom ath10k example
In qcom,ath10k documentation, ath10k is used as node name in the example of pci based device. Normally, node name should be class of device and not the model name, so fix it to node name "wifi". And remove the property device_type pci since only pci bridges should have this property. Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> |
||
Govind Singh
|
a3542d0c73 |
dt: bindings: ath10k: add bindings for wifi iommu node
WCN3990 wifi module can optionally make use of the IOMMU. Add binding documentation for phandle to the IOMMU and the stream id of wifi iommu block. Signed-off-by: Govind Singh <govinds@codeaurora.org> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Brian Norris <briannorris@chromium.org> Tested-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> |
||
Govind Singh
|
5fac78aac9 |
dt: bindings: ath10k: add missing dt properties for WCN3990 wifi node
Add missing optional properties in WCN3990 wifi node. Signed-off-by: Govind Singh <govinds@codeaurora.org> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Brian Norris <briannorris@chromium.org> Tested-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> |
||
Mark Brown
|
74ff666bd7
|
Merge remote-tracking branches 'spi/topic/mem' and 'spi/topic/mtd' into spi-next | ||
Mark Brown
|
b3fc4e0e96
|
Merge branch 'spi-4.21' into spi-next | ||
Diana Craciun
|
e59f5bd759 |
powerpc/fsl: Add FSL_PPC_BOOK3E as supported arch for nospectre_v2 boot arg
Signed-off-by: Diana Craciun <diana.craciun@nxp.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> |
||
Michael Ellerman
|
ec2adcd8dd |
powerpc: Add some documentation of ISA versions
Add some documentation on which CPU versions map to which ISA versions. This is all publicly available information, some of it already in the kernel source, but it's much nicer to have it all in one place. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> |
||
Biao Huang
|
a32ed90be2 |
net-next: dt-binding: dwmac-mediatek: remove fine-tune property
remove fine-tune property in device tree, modify the corresponding description in dt-binding. Signed-off-by: Biao Huang <biao.huang@mediatek.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
Florian Westphal
|
4165079ba3 |
net: switch secpath to use skb extension infrastructure
Remove skb->sp and allocate secpath storage via extension infrastructure. This also reduces sk_buff by 8 bytes on x86_64. Total size of allyesconfig kernel is reduced slightly, as there is less inlined code (one conditional atomic op instead of two on skb_clone). No differences in throughput in following ipsec performance tests: - transport mode with aes on 10GB link - tunnel mode between two network namespaces with aes and null cipher Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net> |