Add mtcmos control function and config.
Signed-off-by: Alice Chao <alice.chao@mediatek.com>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Acked-by: Chun-Hung Wu <Chun-Hung.Wu@mediatek.com>
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Link: https://lore.kernel.org/r/20240315083448.7185-8-peter.wang@mediatek.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Reset mphy when resetting host. Backup mphy setting after mphy reset
control get. Restore mphy setting after mphy reset.
Acked-by: Chun-Hung Wu <Chun-Hung.Wu@mediatek.com>
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Link: https://lore.kernel.org/r/20240315083448.7185-7-peter.wang@mediatek.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Mediatek host power includes two parts:
1. ufshci power, which is the main power of ufs host controller.
2. ufshci crypto sram power, which is the power of ufs crypto engine.
The host power control is actually controlling crypto sram power. Rename
it.
Signed-off-by: Po-Wen Kao <powen.kao@mediatek.com>
Acked-by: Chun-Hung Wu <Chun-Hung.Wu@mediatek.com>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Link: https://lore.kernel.org/r/20240315083448.7185-6-peter.wang@mediatek.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Move sip command and associated define to a new sip header file.
Signed-off-by: Po-Wen Kao <powen.kao@mediatek.com>
Acked-by: Chun-Hung Wu <Chun-Hung.Wu@mediatek.com>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Link: https://lore.kernel.org/r/20240315083448.7185-5-peter.wang@mediatek.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add new mediatek host cap UFS_MTK_CAP_DISABLE_MCQ to allow disabling MCQ
feature by assigning dts boolean property "mediatek,ufs-disable-mcq".
Signed-off-by: Po-Wen Kao <powen.kao@mediatek.com>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Acked-by: Chun-Hung Wu <Chun-Hung.Wu@mediatek.com>
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Link: https://lore.kernel.org/r/20240315083448.7185-4-peter.wang@mediatek.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fix Mediatek TX skew issue by checking dts setting and vendor/model. Then
set PA_TACTIVATE to 8.
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Acked-by: Chun-Hung Wu <Chun-Hung.Wu@mediatek.com>
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Link: https://lore.kernel.org/r/20240315083448.7185-3-peter.wang@mediatek.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
VSX (the upper layer of VCCQ/VCCQ2) should:
1. Always set to hpm mode if ufs device is active.
2. Enter lpm mode only if ufs device is not active.
VCCQX should:
1. Keep hpm mode if vccq and vccq2 not set in dts.
2. Keep hpm mode if vcc not set in dts keep vcc always on.
3. Keep hpm if broken vcc keep vcc always on and not allow vccq lpm.
4. Except upper case, can enter lpm mode if ufs device is not active.
Acked-by: Chun-Hung Wu <Chun-Hung.Wu@mediatek.com>
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Link: https://lore.kernel.org/r/20240315083448.7185-2-peter.wang@mediatek.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Avri Altman <avri.altman@wdc.com> says:
Device management commands are constructed for query commands that are
being issued by the driver, but also for raw device management
commands originated by the bsg module, and recently, by the advanced
rpmb handler. Thus, the same code fragments, e.g. locking, composing
the command, composing the upiu etc., appear over and over. Remove
those duplications. Theoretically, there should be no functional
change.
Link: https://lore.kernel.org/r/20240309081104.5006-1-avri.altman@wdc.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Move some code fragments into ufshcd_prepare_req_desc_hdr() so it can be
used throughout.
Signed-off-by: Avri Altman <avri.altman@wdc.com>
Link: https://lore.kernel.org/r/20240309081104.5006-5-avri.altman@wdc.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Move out some of the dev_cmd initializations so they can be used elsewhere.
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Avri Altman <avri.altman@wdc.com>
Link: https://lore.kernel.org/r/20240309081104.5006-4-avri.altman@wdc.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Move out the actual command issue from exec_dev_cmd it can be used
elsewhere. While at it, remove a redundant "lrbp->cmd = NULL" assignment.
Also, the device management commands that are originated from the
ufs-bsg code path, are being traced now, which wasn't the case before.
Signed-off-by: Avri Altman <avri.altman@wdc.com>
Link: https://lore.kernel.org/r/20240309081104.5006-3-avri.altman@wdc.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Group those 3 calls that repeat for every device management command into
lock and unlock handlers.
Reviewed-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Avri Altman <avri.altman@wdc.com>
Link: https://lore.kernel.org/r/20240309081104.5006-2-avri.altman@wdc.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Only a couple of driver updates this time (lpfc and mpt3sas) plus the
usual assorted minor fixes and updates. The major core update is a
set of patches moving retries out of the drivers and into the core.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCZfWpoCYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishXRgAP9EJN6k
lA+f8he/ckzfJu000zv55uwKeZhI1ytgNnQUGwEAzv7Yetcqra18spuEnHRvxnW9
+lxUGh6revfrO/sc5Ho=
=ONSb
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"Only a couple of driver updates this time (lpfc and mpt3sas) plus the
usual assorted minor fixes and updates. The major core update is a set
of patches moving retries out of the drivers and into the core"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (84 commits)
scsi: core: Constify the struct device_type usage
scsi: libfc: replace deprecated strncpy() with memcpy()
scsi: lpfc: Replace deprecated strncpy() with strscpy()
scsi: bfa: Fix function pointer type mismatch for state machines
scsi: bfa: Fix function pointer type mismatch for hcb_qe->cbfn
scsi: bfa: Remove additional unnecessary struct declarations
scsi: csiostor: Avoid function pointer casts
scsi: qla1280: Remove redundant assignment to variable 'mr'
scsi: core: Make scsi_bus_type const
scsi: core: Really include kunit tests with SCSI_LIB_KUNIT_TEST
scsi: target: tcm_loop: Make tcm_loop_lld_bus const
scsi: scsi_debug: Make pseudo_lld_bus const
scsi: iscsi: Make iscsi_flashnode_bus const
scsi: fcoe: Make fcoe_bus_type const
scsi: lpfc: Copyright updates for 14.4.0.0 patches
scsi: lpfc: Update lpfc version to 14.4.0.0
scsi: lpfc: Change lpfc_vport load_flag member into a bitmask
scsi: lpfc: Change lpfc_vport fc_flag member into a bitmask
scsi: lpfc: Protect vport fc_nodes list with an explicit spin lock
scsi: lpfc: Change nlp state statistic counters into atomic_t
...
- Core and platform-MSI
The core changes have been adopted from previous work which converted
ARM[64] to the new per device MSI domain model, which was merged to
support multiple MSI domain per device. The ARM[64] changes are being
worked on too, but have not been ready yet. The core and platform-MSI
changes have been split out to not hold up RISC-V and to avoid that
RISC-V builds on the scheduled for removal interfaces.
The core support provides new interfaces to handle wire to MSI bridges
in a straight forward way and introduces new platform-MSI interfaces
which are built on top of the per device MSI domain model.
Once ARM[64] is converted over the old platform-MSI interfaces and the
related ugliness in the MSI core code will be removed.
- Drivers:
- Add a new driver for the Andes hart-level interrupt controller
- Rework the SiFive PLIC driver to prepare for MSI suport
- Expand the RISC-V INTC driver to support the new RISC-V AIA
controller which provides the basis for MSI on RISC-V
- A few fixup for the fallout of the core changes.
The actual MSI parts for RISC-V were finalized late and have been
post-poned for the next merge window.
-----BEGIN PGP SIGNATURE-----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=7aXj
-----END PGP SIGNATURE-----
Merge tag 'irq-msi-2024-03-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull MSI updates from Thomas Gleixner:
"Updates for the MSI interrupt subsystem and initial RISC-V MSI
support.
The core changes have been adopted from previous work which converted
ARM[64] to the new per device MSI domain model, which was merged to
support multiple MSI domain per device. The ARM[64] changes are being
worked on too, but have not been ready yet. The core and platform-MSI
changes have been split out to not hold up RISC-V and to avoid that
RISC-V builds on the scheduled for removal interfaces.
The core support provides new interfaces to handle wire to MSI bridges
in a straight forward way and introduces new platform-MSI interfaces
which are built on top of the per device MSI domain model.
Once ARM[64] is converted over the old platform-MSI interfaces and the
related ugliness in the MSI core code will be removed.
The actual MSI parts for RISC-V were finalized late and have been
post-poned for the next merge window.
Drivers:
- Add a new driver for the Andes hart-level interrupt controller
- Rework the SiFive PLIC driver to prepare for MSI suport
- Expand the RISC-V INTC driver to support the new RISC-V AIA
controller which provides the basis for MSI on RISC-V
- A few fixup for the fallout of the core changes"
* tag 'irq-msi-2024-03-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (29 commits)
irqchip/riscv-intc: Fix low-level interrupt handler setup for AIA
x86/apic/msi: Use DOMAIN_BUS_GENERIC_MSI for HPET/IO-APIC domain search
genirq/matrix: Dynamic bitmap allocation
irqchip/riscv-intc: Add support for RISC-V AIA
irqchip/sifive-plic: Improve locking safety by using irqsave/irqrestore
irqchip/sifive-plic: Parse number of interrupts and contexts early in plic_probe()
irqchip/sifive-plic: Cleanup PLIC contexts upon irqdomain creation failure
irqchip/sifive-plic: Use riscv_get_intc_hwnode() to get parent fwnode
irqchip/sifive-plic: Use devm_xyz() for managed allocation
irqchip/sifive-plic: Use dev_xyz() in-place of pr_xyz()
irqchip/sifive-plic: Convert PLIC driver into a platform driver
irqchip/riscv-intc: Introduce Andes hart-level interrupt controller
irqchip/riscv-intc: Allow large non-standard interrupt number
genirq/irqdomain: Don't call ops->select for DOMAIN_BUS_ANY tokens
irqchip/imx-intmux: Handle pure domain searches correctly
genirq/msi: Provide MSI_FLAG_PARENT_PM_DEV
genirq/irqdomain: Reroute device MSI create_mapping
genirq/msi: Provide allocation/free functions for "wired" MSI interrupts
genirq/msi: Optionally use dev->fwnode for device domain
genirq/msi: Provide DOMAIN_BUS_WIRED_TO_MSI
...
The MSM8996 DT doesn't provide frequency limits for the core_clk_unipro
clock, which results in miscalculation of the cycles_in_1us value. Provide
the backwards-compatible default to support existing MSM8996 DT files.
Fixes: b4e13e1ae9 ("scsi: ufs: qcom: Add multiple frequency support for MAX_CORE_CLK_1US_CYCLES")
Cc: Nitin Rawat <quic_nitirawa@quicinc.com>
Cc: stable@vger.kernel.org # 6.7.x
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240218-msm8996-fix-ufs-v3-1-40aab49899a3@linaro.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
As per JEDEC Standard No. 223E Section 5.9.2, the max # active commands
value programmed by the host sw in MCQConfig.MAC should be one less than
the actual value.
Signed-off-by: Rohit Ner <rohitner@google.com>
Link: https://lore.kernel.org/r/20240220095637.2900067-1-rohitner@google.com
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Reviewed-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
There is one goto where "sched_clk_scaling_suspend_work" is true but
"scale_up" is uninitialized. It leads to a Smatch uninitialized variable
warning:
drivers/ufs/core/ufshcd.c:1589 ufshcd_devfreq_target() error: uninitialized symbol 'scale_up'.
Fixes: 1d969731b8 ("scsi: ufs: core: Only suspend clock scaling if scaling down")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/c787d37f-1107-4512-8991-bccf80e74a35@moroto.mountain
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Switch all the users of the platform MSI domain over to invoke the new
interfaces which branch to the original platform MSI functions when the
irqdomain associated to the caller device does not yet provide MSI parent
functionality.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240127161753.114685-7-apatel@ventanamicro.com
Pass a queue_limits to blk_mq_init_queue and apply it if non-NULL. This
will allow allocating queues with valid queue limits instead of setting
the values one at a time later.
Also rename the function to blk_mq_alloc_queue as that is a much better
name for a function that allocates a queue and always pass the queuedata
argument instead of having a separate version for the extra argument.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20240213073425.1621680-10-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If ufshcd_err_handler() is called in a suspend/resume situation,
ufs_release() can be called twice and active_reqs end up going negative.
This is because ufshcd_err_handling_prepare() and
ufshcd_err_handling_unprepare() both call ufshcd_release().
Remove superfluous call to ufshcd_release().
Signed-off-by: SEO HOYOUNG <hy50.seo@samsung.com>
Link: https://lore.kernel.org/r/20240122083324.11797-1-hy50.seo@samsung.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Mike Christie <michael.christie@oracle.com> says:
The following patches were made over Linus's tree which contains a fix
for sd which was not in Martin's branches.
The patches allow scsi_execute_cmd users to have scsi-ml retry the cmd
for it instead of the caller having to parse the error and loop
itself.
Link: https://lore.kernel.org/r/20240123002220.129141-1-michael.christie@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This has the SCSI midlayer retry errors instead of driving them itself.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Link: https://lore.kernel.org/r/20240123002220.129141-19-michael.christie@oracle.com
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
On sa8775p-ride, probing the HBA will go through the
UFSHCD_QUIRK_REINIT_AFTER_MAX_GEAR_SWITCH path although the power info is
the same during the second init.
The REINIT quirk only applies starting with controller v4. For these,
ufs_qcom_get_hs_gear() reads the highest supported gear when setting the
host_params. After the negotiation, if the host and device are on the same
gear, it is the highest gear supported between the two. Skip REINIT to save
some time.
Signed-off-by: Eric Chanudet <echanude@redhat.com>
Link: https://lore.kernel.org/r/20240123192854.1724905-4-echanude@redhat.com
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Tested-by: Andrew Halaney <ahalaney@redhat.com> # sa8775p-ride
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The comments that currently are within the hw_ver < 4 conditional are
misleading. They really apply to various branches of the conditionals there
and incorrectly state that the phy_gear value can increase.
Right now the logic is to:
- Default to max supported gear for phy_gear
- Set phy_gear to minimum value if version < 4 since those versions only
support one PHY init sequence (and therefore don't need reinit)
- Set phy_gear to the optimal value if the device version is already
populated in the controller registers on boot
Let's move some of the comment to outside the if statement and clean up the
bit left about switching to a higher gear on reinit. This way the comment
more accurately reflects the logic.
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20240123-ufs-reinit-comments-v1-1-ff2b3532d7fe@redhat.com
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The 'hwq' parameter is not used in this function. Remove unused parameters.
Signed-off-by: ChanWoo Lee <cw9316.lee@samsung.com>
Link: https://lore.kernel.org/r/20240105021041.20400-3-cw9316.lee@samsung.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Use ufshcd_mcq_req_to_hwq() to remove unnecessary variables and simplify.
Signed-off-by: ChanWoo Lee <cw9316.lee@samsung.com>
Link: https://lore.kernel.org/r/20240105021041.20400-2-cw9316.lee@samsung.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Instead of hardcoding the register field, add the proper definition. While
at it, let's also use ufshcd_rmwl() to simplify updating this register.
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: ChanWoo Lee <cw9316.lee@samsung.com>
Link: https://lore.kernel.org/r/20240102014222.23351-1-cw9316.lee@samsung.com
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The runtime suspend timer delay is a const value in scsi_host_template
which a host driver cannot modify at runtime. Move the delay to Scsi_Host
to allow a driver to update it.
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Link: https://lore.kernel.org/r/20240109124015.31359-2-peter.wang@mediatek.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Disable MCQ IRQ when clock is off. This is same as legacy mode.
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Link: https://lore.kernel.org/r/20231221110416.16176-4-peter.wang@mediatek.com
Reviewed-by: Chun-Hung Wu <chun-hung.wu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fix TM cmd timeout issue in MCQ mode using the default resume call
ufshcd_make_hba_operational() to set TM cmd DMA address.
This flow is the same as UFS initialization after link startup and then
setting MCQ related registers if using MCQ mode.
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Link: https://lore.kernel.org/r/20231221110416.16176-3-peter.wang@mediatek.com
Reviewed-by: Chun-Hung Wu <chun-hung.wu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
To prevent SSU(Active) error, check link status after exiting hibern8. If
link is not VS_LINK_UP, return error and do ufshcd_link_recovery.
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Link: https://lore.kernel.org/r/20231221110416.16176-2-peter.wang@mediatek.com
Reviewed-by: Chun-Hung Wu <chun-hung.wu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The PM QoS feature found in the MediaTek UFS driver was moved to the UFSHCD
core. Hence remove it from MediaTek UFS driver as it is redundant now.
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Maramaina Naresh <quic_mnaresh@quicinc.com>
Link: https://lore.kernel.org/r/20231219123706.6463-3-quic_mnaresh@quicinc.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Register UFS driver to CPU latency PM QoS framework to improve UFS device
random I/O performance.
PM QoS initialization will insert new QoS request into the CPU latency QoS
list with the maximum latency PM_QOS_DEFAULT_VALUE value.
The UFS driver will vote for performance mode on scale up and power save
mode for scale down.
If clock scaling feature is not enabled then voting will be based on clock
on or off condition. Also provide a sysfs interface to enable/disable PM
QoS feature.
tiotest benchmark tool I/O performance results on sm8550 platform:
1. Without PM QoS support
Type (Speed in) | Average of 18 iterations
Random Write(IPOS) | 41065.13
Random Read(IPOS) | 37101.3
2. With PM QoS support
Type (Speed in) | Average of 18 iterations
Random Write(IPOS) | 46784.9
Random Read(IPOS) | 42943.4
(Improvement with PM QoS = ~15%).
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Co-developed-by: Nitin Rawat <quic_nitirawa@quicinc.com>
Signed-off-by: Nitin Rawat <quic_nitirawa@quicinc.com>
Co-developed-by: Naveen Kumar Goud Arepalli <quic_narepall@quicinc.com>
Signed-off-by: Naveen Kumar Goud Arepalli <quic_narepall@quicinc.com>
Signed-off-by: Maramaina Naresh <quic_mnaresh@quicinc.com>
Link: https://lore.kernel.org/r/20231219123706.6463-2-quic_mnaresh@quicinc.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Final round of fixes that came in too late to send in the first
request. It's 9 bug fixes and one version update (because of a bug
fix) and one set of PCI ID additions. There's one bug fix in the core
which is really a one liner (except that an additional sdev pointer
was added for convenience) and the rest are in drivers.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCZavlICYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishSIpAP9Ynm64
sxlwxmaRv9uzf6+Nbadesve0UWCPHHYjIxtNBwD/SV6wgn/WdJqO1rONR8w3RknL
ZFShKw5QmiKXVDmDJTg=
=WSYQ
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"Final round of fixes that came in too late to send in the first
request.
It's nine bug fixes and one version update (because of a bug fix) and
one set of PCI ID additions. There's one bug fix in the core which is
really a one liner (except that an additional sdev pointer was added
for convenience) and the rest are in drivers"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: target: core: Add TMF to tmr_list handling
scsi: core: Kick the requeue list after inserting when flushing
scsi: fnic: unlock on error path in fnic_queuecommand()
scsi: fcoe: Fix unsigned comparison with zero in store_ctlr_mode()
scsi: mpi3mr: Fix mpi3mr_fw.c kernel-doc warnings
scsi: smartpqi: Bump driver version to 2.1.26-030
scsi: smartpqi: Fix logical volume rescan race condition
scsi: smartpqi: Add new controller PCI IDs
scsi: ufs: qcom: Remove unnecessary goto statement from ufs_qcom_config_esi()
scsi: ufs: core: Remove the ufshcd_hba_exit() call from ufshcd_async_scan()
scsi: ufs: core: Simplify power management during async scan
Updates to the usual drivers (ufs, mpi3mr, mpt3sas, lpfc, fnic,
hisi_sas, arcmsr, ) plus the usual assorted minor fixes and updates.
This time around there's only a single line update to the core, so
nothing major and barely anything minor.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCZZ7roSYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pisha3lAQC5BAGM
7OKk39iOtsKdq8uxYAhYx871sNtwBp8+BSk1FgEAhy1hg7fgCnOvl7chbSNDR6p/
mW11fYi4j2UvxECT2tg=
=/tvT
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"Updates to the usual drivers (ufs, mpi3mr, mpt3sas, lpfc, fnic,
hisi_sas, arcmsr, ) plus the usual assorted minor fixes and updates.
This time around there's only a single line update to the core, so
nothing major and barely anything minor"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (135 commits)
scsi: ufs: core: Simplify ufshcd_auto_hibern8_update()
scsi: ufs: core: Rename ufshcd_auto_hibern8_enable() and make it static
scsi: ufs: qcom: Fix ESI vector mask
scsi: ufs: host: Fix kernel-doc warning
scsi: hisi_sas: Correct the number of global debugfs registers
scsi: hisi_sas: Rollback some operations if FLR failed
scsi: hisi_sas: Check before using pointer variables
scsi: hisi_sas: Replace with standard error code return value
scsi: hisi_sas: Set .phy_attached before notifing phyup event HISI_PHYE_PHY_UP_PM
scsi: ufs: core: Add sysfs node for UFS RTC update
scsi: ufs: core: Add UFS RTC support
scsi: ufs: core: Add ufshcd_is_ufs_dev_busy()
scsi: ufs: qcom: Remove unused definitions
scsi: ufs: qcom: Use ufshcd_rmwl() where applicable
scsi: ufs: qcom: Remove support for host controllers older than v2.0
scsi: ufs: qcom: Simplify ufs_qcom_{assert/deassert}_reset
scsi: ufs: qcom: Initialize cycles_in_1us variable in ufs_qcom_set_core_clk_ctrl()
scsi: ufs: qcom: Sort includes alphabetically
scsi: ufs: qcom: Remove unused ufs_qcom_hosts struct array
scsi: ufs: qcom: Use dev_err_probe() to simplify error handling of devm_gpiod_get_optional()
...
There is only one place where goto is used, and it is unnecessary to check
the ret value through 'goto out' because the ret value is already true.
Therefore, remove the goto statement and integrate the '!ret' condition
into the existing code.
Signed-off-by: ChanWoo Lee <cw9316.lee@samsung.com>
Link: https://lore.kernel.org/r/20231219082740.27644-1-cw9316.lee@samsung.com
Reviewed-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Calling ufshcd_hba_exit() from a function that is called asynchronously
from ufshcd_init() is wrong because this triggers multiple race
conditions. Instead of calling ufshcd_hba_exit(), log an error message.
Reported-by: Daniel Mentz <danielmentz@google.com>
Fixes: 1d337ec2f3 ("ufs: improve init sequence")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20231218225229.2542156-3-bvanassche@acm.org
Reviewed-by: Can Guo <quic_cang@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
ufshcd_init() calls pm_runtime_get_sync() before it calls
async_schedule(). ufshcd_async_scan() calls pm_runtime_put_sync() directly
or indirectly from ufshcd_add_lus(). Simplify ufshcd_async_scan() by always
calling pm_runtime_put_sync() from ufshcd_async_scan().
Cc: <stable@vger.kernel.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20231218225229.2542156-2-bvanassche@acm.org
Reviewed-by: Can Guo <quic_cang@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When accessing sq_tail_slot without protection from sq_lock, a race
condition can cause multiple SQEs to be copied to duplicate SQE slots. This
can lead to multiple stability issues. Fix this by moving the *dest
initialization in ufshcd_send_command() back under protection from the
sq_lock.
Fixes: 3c85f087fa ("scsi: ufs: mcq: Use pointer arithmetic in ufshcd_send_command()")
Signed-off-by: Can Guo <quic_cang@quicinc.com>
Link: https://lore.kernel.org/r/1702913550-20631-1-git-send-email-quic_cang@quicinc.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In commit 031312dbc6 ("scsi: ufs: ufs-qcom: Remove unnecessary goto
statements") the error handling was accidentally changed, resulting in the
error of ufs_qcom_clk_scale_*() calls not being returned.
This is the case I checked:
ufs_qcom_clk_scale_notify ->
'ufs_qcom_clk_scale_up_/down_pre_change' error ->
return 0;
Make sure those errors are properly returned.
Fixes: 031312dbc6 ("scsi: ufs: ufs-qcom: Remove unnecessary goto statements")
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: ChanWoo Lee <cw9316.lee@samsung.com>
Link: https://lore.kernel.org/r/20231215003812.29650-1-cw9316.lee@samsung.com
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Calls to ufshcd_auto_hibern8_update() are already serialized: this function
is either called if user space software is not running (preparing to
suspend) or from a single sysfs store callback function. Kernfs serializes
sysfs .store() callbacks. No functionality is changed.
Reviewed-by: Bao D. Nguyen <quic_nguyenb@quicinc.com>
Reviewed-by: Can Guo <quic_cang@quicinc.com>
Cc: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20231214192416.3638077-3-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Rename ufshcd_auto_hibern8_enable() into ufshcd_configure_auto_hibern8()
since this function can enable or disable auto-hibernation. Since
ufshcd_auto_hibern8_enable() is only used inside the UFSHCI driver core,
declare it static. Additionally, move the definition of this function to
just before its first caller.
Suggested-by: Bao D. Nguyen <quic_nguyenb@quicinc.com>
Reviewed-by: Bao D. Nguyen <quic_nguyenb@quicinc.com>
Reviewed-by: Can Guo <quic_cang@quicinc.com>
Cc: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20231214192416.3638077-2-bvanassche@acm.org
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
While cleaning up the code to use ufshcd_rmwl() helper, the ESI vector mask
was changed incorrectly. Fix it and also define a proper macro for the
value together with FIELD_PREP().
Reported-by: Andrew Halaney <ahalaney@redhat.com>
Fixes: 0e9f4375db ("scsi: ufs: qcom: Use ufshcd_rmwl() where applicable")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20231214125532.55109-1-manivannan.sadhasivam@linaro.org
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Commit fa3dca8251 ("scsi: ufs: host: Rename structure ufs_dev_params
to ufs_host_params") inadvertently introduced a comment line without
'*' prefix. Format the comment section correctly.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202312171915.YhlTLvLL-lkp@intel.com/
Fixes: fa3dca8251 ("scsi: ufs: host: Rename structure ufs_dev_params to ufs_host_params")
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Bean Huo <beanhuo@iokpp.de> says:
Adding RTC support for embedded storage device UFS in its driver, it
is important for a few key reasons:
1. Helps with Regular Maintenance:
The RTC provides a basic way to keep track of time, making it useful for
scheduling routine maintenance tasks in the storage device. This includes
things like making sure data is spread
evenly across the storage to extend its life.
2. Figuring Out How Old Data Is:
The RTC helps the device estimate how long ago certain parts of the storage
were last used. This is handy for deciding when to do maintenance tasks to
keep the storage working well over time.
3. Making Devices Last Longer:
By using the RTC for regular upkeep, we can make sure the storage device lasts
longer and stays reliable. This is especially important for devices that need
to work well for a long time.
4.Fitting In with Other Devices:
The inclusion of RTC support aligns with existing UFS specifications (starting
from UFS Spec 2.0) and is consistent with the prevalent industry practice. Many
UFS devices currently on the market utilize RTC for internal timekeeping. By
ensuring compatibility with this widely adopted standard, the embedded storage
device becomes seamlessly integrable with existing hardware and software
ecosystems, reducing the risk of compatibility issues.
In short, adding RTC support to embedded storage device UFS helps with regular
upkeep, extends the device's life, ensures compatibility, and keeps everything
running smoothly with the rest of the system.
Link: https://lore.kernel.org/r/20231212220825.85255-1-beanhuo@iokpp.de
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
