This patch introduces support for a new architectured reply
code 0x8B indicating that a hypervisor layer (if any) has
rejected an ap message.
Linux may run as a guest on top of a hypervisor like zVM
or KVM. So the crypto hardware seen by the ap bus may be
restricted by the hypervisor for example only a subset like
only clear key crypto requests may be supported. Other
requests will be filtered out - rejected by the hypervisor.
The new reply code 0x8B will appear in such cases and needs
to get recognized by the ap bus and zcrypt device driver zoo.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
There exist very few ap messages which need to have the 'special' flag
enabled. This flag tells the firmware layer to do some pre- and maybe
postprocessing. However, it may happen that this special flag is
enabled but the firmware is unable to deal with this kind of message
and thus returns with reply code 0x41. For example older firmware may
not know the newest messages triggered by the zcrypt device driver and
thus react with reject and the named reply code. Unfortunately this
reply code is not known to the zcrypt error routines and thus default
behavior is to switch the ap queue offline.
This patch now makes the ap error routine aware of the reply code and
so userspace is informed about the bad processing result but the queue
is not switched to offline state any more.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
The apfs field (AP final status) is set on transport
protocol failures (reply code 0x90) for type 86 replies.
For CCA cprbs this value is copied into the xcrb status
field which gives userspace a hint for the failure reason.
However, for EP11 cprbs there is no such status field
in the xcrb struct. So now regardless of the request
type, if a reply type 86 with transport protocol failure
is seen, the apfs value is printed as part of the debug
message. So the user has a chance to see the apfs value
without using a special build kernel.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Some cleanup in the s390 zcrypt device driver:
- Removed fragments of pcixx crypto card code. This code
can't be reached anymore because the hardware detection
function does not recognize crypto cards < CEX2 since
commit f56545430736 ("s390/zcrypt: Introduce QACT support
for AP bus devices.")
- Rename of some files and driver names which where still
reflecting pcixx support to cex2a/cex2c.
- Removed all the zcrypt version strings in the file headers.
There is only one place left - the zcrypt.h header file is
now the only place for zcrypt device driver version info.
- Zcrypt version pump up from 2.2.0 to 2.2.1.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Code beautify by following most of the checkpatch suggestions:
- SPDX license identifier line complains by checkpatch
- missing space or newline complains by checkpatch
- octal numbers for permssions complains by checkpatch
- renaming of static sysfs functions complains by checkpatch
- fix of block comment complains by checkpatch
- fix printf like calls where function name instead of %s __func__
was used
- __packed instead of __attribute__((packed))
- init to zero for static variables removed
- use of DEVICE_ATTR_RO and DEVICE_ATTR_RW macros
No functional code changes or API changes!
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Now that the SPDX tag is in all drivers/s390/crypto/ files, that
identifies the license in a specific and legally-defined manner. So the
extra GPL text wording can be removed as it is no longer needed at all.
This is done on a quest to remove the 700+ different ways that files in
the kernel describe the GPL license text. And there's unneeded stuff
like the address (sometimes incorrect) for the FSF which is never
needed.
No copyright headers or other non-license-description text was removed.
Cc: Harald Freudenberger <freude@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
It's good to have SPDX identifiers in all files to make it easier to
audit the kernel tree for correct licenses.
Update the drivers/s390/crypto/ files with the correct SPDX license
identifier based on the license text in the file itself. The SPDX
identifier is a legally binding shorthand, which can be used instead of
the full boiler plate text.
This work is based on a script and data from Thomas Gleixner, Philippe
Ombredanne, and Kate Stewart.
Cc: Harald Freudenberger <freude@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Rework the debug feature calls and initialization. There
are now two debug feature entries used by the zcrypt code.
The first is 'ap' with all the AP bus related stuff and the
second is 'zcrypt' with all the zcrypt and devices and
driver related entries. However, there isn't much traffic on
both debug features. The ap bus code emits only some debug
info and for zcrypt devices on appearance and disappearance
there is an entry written.
The new dbf invocations use the sprintf buffer layout,
whereas the old implementation used the ascii dbf buffer.
There are now 5*8=40 bytes used for each entry, resulting in
5 parameters per call. As the sprintf buffer needs a format
string the first parameter provides this and so up to 4 more
parameters can be used. Alltogehter the new layout should be
much more human readable for customers and test.
Signed-off-by: Harald Freudenberger <freude@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Add defines and switch case code to handle the two invalid
domain response codes better. Until now these two response
codes are handled via default resulting in -EAGAIN and
switching the processed queue to offline. So this kind of
malformed request bounced through all suitable queues and
switched them off. Now this kind of malformed request is
just rejected with EINVAL without switching off the queue.
Signed-off-by: Harald Freudenberger <freude@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Currently the ap infrastructure only supports one domain at a time.
This feature extends the generic cryptographic device driver to
support multiple cryptographic domains simultaneously.
There are now card and queue devices on the AP bus with independent
card and queue drivers. The new /sys layout is as follows:
/sys/bus/ap
devices
<xx>.<yyyy> -> ../../../devices/ap/card<xx>/<xx>.<yyyy>
...
card<xx> -> ../../../devices/ap/card<xx>
...
drivers
<drv>card
card<xx> -> ../../../../devices/ap/card<xx>
<drv>queue
<xx>.<yyyy> -> ../../../../devices/ap/card<xx>/<xx>.<yyyy>
...
/sys/devices/ap
card<xx>
<xx>.<yyyy>
driver -> ../../../../bus/ap/drivers/<zzz>queue
...
driver -> ../../../bus/ap/drivers/<drv>card
...
The two digit <xx> field is the card number, the four digit <yyyy>
field is the queue number and <drv> is the name of the device driver,
e.g. "cex4".
For compatability /sys/bus/ap/card<xx> for the old layout has to exist,
including the attributes that used to reside there.
With additional contributions from Harald Freudenberger and
Martin Schwidefsky.
Signed-off-by: Ingo Tuchscherer <ingo.tuchscherer@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Currently, on card response failures a combination of card domain and
domain id is recorded in the kernel messages.
According to the message description only the card id will be recorded.
The domain id is not relevant, since the whole card including all domains
is set offline.
Signed-off-by: Ingo Tuchscherer <ingo.tuchscherer@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
This feature extends the generic cryptographic device driver (zcrypt)
with a new capability to service EP11 requests for the Crypto Express4S
card in EP11 (Enterprise PKCS#11 mode) coprocessor mode.
Signed-off-by: Ingo Tuchscherer <ingo.tuchscherer@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Detect external AP bus configuration changes and request
an AP device rescan.
Signed-off-by: Holger Dengler <hd@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Remove the file name from the comment at top of many files. In most
cases the file name was wrong anyway, so it's rather pointless.
Also unify the IBM copyright statement. We did have a lot of sightly
different statements and wanted to change them one after another
whenever a file gets touched. However that never happened. Instead
people start to take the old/"wrong" statements to use as a template
for new files.
So unify all of them in one go.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Comments, which suggested to be kernel-doc but were not in the right
formatting, have been corrected. Additionally some minor cleanup in
the comments has been done.
Signed-off-by: Felix Beck <felix.beck@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Allow the user space to send extended cprb messages directly to the
PCIXCC / CEX2C cards. This allows the CCA library to construct special
crypto requests that use "secure" keys that are stored on the card.
Signed-off-by: Ralph Wuerthner <rwuerthn@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
