Commit 4fb6a37c3f by Andrey Utkin
<andrey.krieger.utkin@gmail.com> and entitled "staging: rtl8192ee:
"Correct bitmask in comparsion" fixed what appeared to be a typo. After
consultation with the Realtek engineers, merely testing for a 2T2R device
is sufficient to ensure that the TX MCS map will equal 0x0c, thus the second
test can be ignored.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The issue is discovered by static checker. The proposed change (0x000c0
-> 0x000c) is likely correct because:
1. 16-bit `map` holds value coming from struct
ieee80211_vht_mcs_info.tx_mcs_map, which is described so: "TX MCS map 2
bits for each stream, total 8 streams". The changed code refers to case
of 2 TX streams, and 0x000c mask filters two bits related to the second
stream. Some codelines below 0x0003 mask is used to test first stream.
2. Mask 0x000c is used 3 more times in that place.
3. Specifying 5 digits of hex value is uncommon, especially while working
with `u16` variable. So likely the trailing zero is a typo.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=78041
Reported-by: David Binderman <dcb314@hotmail.com>
Signed-off-by: Andrey Utkin <andrey.krieger.utkin@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
struct rtl_stats is rather huge (152 bytes), and since
rtl92ee_rx_command_packet() does not modify it, it might as
well be passed by const reference.
Reported by Coverity: CID 1222131
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes the tab error found in base.h, reported by checkpatch.pl tool
Signed-off-by: Morgan Stuart <morgansstuartdev@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Two Kconfig entries default to (uppercase) "N". It was clearly intended
to use "default n". But since (lowercase) "n" is the default anyway,
these lines might as well be removed.
Reported-by: Martin Walch <walch.martin@web.de>
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This makes sure a format string cannot leak into the work queue name nor
the printk buffer.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull networking updates from David Miller:
1) Seccomp BPF filters can now be JIT'd, from Alexei Starovoitov.
2) Multiqueue support in xen-netback and xen-netfront, from Andrew J
Benniston.
3) Allow tweaking of aggregation settings in cdc_ncm driver, from Bjørn
Mork.
4) BPF now has a "random" opcode, from Chema Gonzalez.
5) Add more BPF documentation and improve test framework, from Daniel
Borkmann.
6) Support TCP fastopen over ipv6, from Daniel Lee.
7) Add software TSO helper functions and use them to support software
TSO in mvneta and mv643xx_eth drivers. From Ezequiel Garcia.
8) Support software TSO in fec driver too, from Nimrod Andy.
9) Add Broadcom SYSTEMPORT driver, from Florian Fainelli.
10) Handle broadcasts more gracefully over macvlan when there are large
numbers of interfaces configured, from Herbert Xu.
11) Allow more control over fwmark used for non-socket based responses,
from Lorenzo Colitti.
12) Do TCP congestion window limiting based upon measurements, from Neal
Cardwell.
13) Support busy polling in SCTP, from Neal Horman.
14) Allow RSS key to be configured via ethtool, from Venkata Duvvuru.
15) Bridge promisc mode handling improvements from Vlad Yasevich.
16) Don't use inetpeer entries to implement ID generation any more, it
performs poorly, from Eric Dumazet.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1522 commits)
rtnetlink: fix userspace API breakage for iproute2 < v3.9.0
tcp: fixing TLP's FIN recovery
net: fec: Add software TSO support
net: fec: Add Scatter/gather support
net: fec: Increase buffer descriptor entry number
net: fec: Factorize feature setting
net: fec: Enable IP header hardware checksum
net: fec: Factorize the .xmit transmit function
bridge: fix compile error when compiling without IPv6 support
bridge: fix smatch warning / potential null pointer dereference
via-rhine: fix full-duplex with autoneg disable
bnx2x: Enlarge the dorq threshold for VFs
bnx2x: Check for UNDI in uncommon branch
bnx2x: Fix 1G-baseT link
bnx2x: Fix link for KR with swapped polarity lane
sctp: Fix sk_ack_backlog wrap-around problem
net/core: Add VF link state control policy
net/fsl: xgmac_mdio is dependent on OF_MDIO
net/fsl: Make xgmac_mdio read error message useful
net_sched: drr: warn when qdisc is not work conserving
...
There are references to four undefined Kconfig macros in the code.
Commit 8542373dcc ("Staging: rtl8812ae: remove undefined Kconfig
macros") removed identical references from another staging driver, but
they resurfaced in rtl8192ee. Remove these again as the checks for them
still will always evaluate to false.
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
version.h inclusion is not needed as detected by versioncheck.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes the followign build error:
drivers/staging/rtl8192ee/btcoexist/halbtc8723b1ant.c:1387:6: error: called object is not a function or function pointer
("[BTCoex], Wifi non connected-idle + BT Busy!!\n"));
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A build of this driver fails when PCI is not selected. It would also
fail if MAC80211 is not selected. Kconfig is fixed to handle these
conditions, and to select additional necessary components.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The 0day kernel testing robot got the kernel warning caused by trying
to register a particular rate-control algorithm more than once. I believe
that the core already protects against a particular driver doing the
registration more than once, but an analysis of the code reveals that
the identical name is used for the rtlwifi drivers in the regular
wireless tree, and the staging drivers r8192ee and r8821ae. The fix
is to rename the algorithm used in r8192ee.
Reported-by: Jet Chen <jet.chen@intel.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Tested-by: Jet Chen <jet.chen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In addition, this commit contains a TODO file for this driver
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
These files are specific to the RTL8192EE
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In the wireless tree, this code forms a separate mini driver. As the changes
needed for the later drivers has not yet been merged, a separate version
is needed here.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This part is the equivalent of rtlwifi in the wireless tree. As the changes
needed for the RTL8192EE have not yet been merged, a separate version is still
needed.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
