At driver load we need to tell the vblank code about the state of the
pipes, so that the logic around reject vblank_get when the pipe is off
works correctly.
Thus far i915 used drm_vblank_off, but one of the side-effects of it
is that it also saves the vblank counter. And for that it calls down
into the ->get_vblank_counter hook. Which isn't really a good idea
when the pipe is off for a few reasons:
- With runtime pm the register might not respond.
- If the pipe is off some datastructures might not be around or
unitialized.
The later is what blew up on gen3: We look at intel_crtc->config to
compute the vblank counter, and for a disabled pipe at boot-up that's
just not there. Thus far this was papered over by a check for
intel_crtc->active, but I want to get rid of that (since it's fairly
race, vblank hooks are called from all kinds of places).
So prep for that by adding a _reset functions which only does what we
really need to be done at driver load: Mark the vblank pipe as off,
but don't do any vblank counter saving or event flushing - neither of
that is required.
v2: Clarify the code flow slightly as suggested by Ville.
v3: Fix kerneldoc spelling, spotted by Laurent.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com> (v2)
Acked-by: Dave Airlie <airlied@redhat.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
In DRM/KMS we are lacking a good way to deal with tiled/compressed
formats. Especially in the case of dmabuf/prime buffer sharing, where
we cannot always rely on under-the-hood flags passed to driver specific
gem-create ioctl to pass around these extra flags.
The proposal is to add a per-plane format modifier. This allows to, if
necessary, use different tiling patters for sub-sampled planes, etc.
The format modifiers are added at the end of the ioctl struct, so for
legacy userspace it will be zero padded.
v1: original
v1.5: increase modifier to 64b
v2: Incorporate review comments from the big thread, plus a few more.
- Add a getcap so that userspace doesn't have to jump through hoops.
- Allow modifiers only when a flag is set. That way drivers know when
they're dealing with old userspace and need to fish out e.g. tiling
from other information.
- After rolling out checks for ->modifier to all drivers I've decided
that this is way too fragile and needs an explicit opt-in flag. So
do that instead.
- Add a define (just for documentation really) for the "NONE"
modifier. Imo we don't need to add mask #defines since drivers
really should only do exact matches against values defined with
fourcc_mod_code.
- Drop the Samsung tiling modifier on Rob's request since he's not yet
sure whether that one is accurate.
v3:
- Also add a new ->modifier[] array to struct drm_framebuffer and fill
it in drm_helper_mode_fill_fb_struct. Requested by Tvrkto Uruslin.
- Remove TODO in comment and add code comment that modifiers should be
properly documented, requested by Rob.
Cc: Rob Clark <robdclark@gmail.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Daniel Stone <daniel@fooishbar.org>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Michel Dänzer <michel@daenzer.net>
Signed-off-by: Rob Clark <robdclark@gmail.com> (v1.5)
Reviewed-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
We need to have a separate GT3 struct intel_device_info to declare they
have a second VCS. Let's start by splitting the PCI ids per-GT.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The rotation property is shared by multiple drivers, so it makes sense
to store the rotation value (for atomic-converted drivers) in the common
plane state so that core code can eventually access it as well.
Cc: dri-devel@lists.freedesktop.org
Suggested-by: Daniel Vetter <daniel@ffwll.ch>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
- refactor i915/snd-hda interaction to use the component framework (Imre)
- psr cleanups and small fixes (Rodrigo)
- a few perf w/a from Ken Graunke
- switch to atomic plane helpers (Matt Roper)
- wc mmap support (Chris Wilson & Akash Goel)
- smaller things all over
* tag 'drm-intel-next-2015-01-17' of git://anongit.freedesktop.org/drm-intel: (40 commits)
drm/i915: Update DRIVER_DATE to 20150117
i915: reuse %ph to dump small buffers
drm/i915: Ensure the HiZ RAW Stall Optimization is on for Cherryview.
drm/i915: Enable the HiZ RAW Stall Optimization on Broadwell.
drm/i915: PSR link standby at debugfs
drm/i915: group link_standby setup and let this info visible everywhere.
drm/i915: Add missing vbt check.
drm/i915: PSR HSW/BDW: Fix inverted logic at sink main_link_active bit.
drm/i915: PSR VLV/CHV: Remove condition checks that only applies to Haswell.
drm/i915: VLV/CHV PSR needs to exit PSR on every flush.
drm/i915: Fix kerneldoc for i915 atomic plane code
drm/i915: Don't pretend SDVO hotplug works on 915
drm/i915: Don't register HDMI connectors for eDP ports on VLV/CHV
drm/i915: Remove I915_HAS_HOTPLUG() check from i915_hpd_irq_setup()
drm/i915: Make hpd arrays big enough to avoid out of bounds access
Revert "drm/i915/chv: Use timeout mode for RC6 on chv"
drm/i915: Improve HiZ throughput on Cherryview.
drm/i915: Reset CSB read pointer in ring init
drm/i915: Drop unused position fields (v2)
drm/i915: Move to atomic plane helpers (v9)
...
Just flushing out my drm-misc branch, nothing major. Well too old patches
I've dug out from years since a patch from Rob look eerily familiar ;-)
* tag 'topic/core-stuff-2015-01-23' of git://anongit.freedesktop.org/drm-intel:
drm/probe-helper: clamp unknown connector status in the poll work
drm/probe-helper: don't lose hotplug event
next: drm/atomic: Use copy_from_user to copy 64 bit data from user space
drm: Make drm_read() more robust against multithreaded races
drm/fb-helper: Propagate errors from initial config failure
drm: Drop superfluous "select VT_HW_CONSOLE_BINDING"
There's a race window (small for hpd, 10s large for polled outputs)
where userspace could sneak in with an unrelated connnector probe
ioctl call and eat the hotplug event (since neither the hpd nor the
poll code see a state change).
To avoid this, check whether the connector state changes in all other
->detect calls (in the current helper code that's only probe_single)
and if that's the case, fire off a hotplug event. Note that we can't
directly call the hotplug event handler, since that expects that no
locks are held (due to reentrancy with the fb code to update the kms
console).
Also, this requires that drivers using the probe_single helper
function set up the poll work. All current drivers do that already,
and with the reworked hpd handling there'll be no downside to
unconditionally setting up the poll work any more.
v2: Review from Rob Clark
- Don't bail out of the output poll work immediately if it's disabled
to make sure we deliver the delayed hoptplug events. Instead just
jump to the tail.
- Don't scheduel the work when it's not set up. Would be a driver bug
since using probe helpers for anything dynamic without them
initialized makes them all noops.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (v1)
Cc: Rob Clark <robdclark@gmail.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Tested-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Make drm_fb_helper_initial_config() return an int rather than a bool so
that the error can be properly propagated. While at it, update drivers
to propagate errors further rather than just ignore them.
v2:
- cirrus: No cleanup is required, the top-level cirrus_driver_load()
will do it as part of cirrus_driver_unload() in its cleanup path.
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
[danvet: Squash in simplification patch from kbuild.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Add bus_formats and num_bus_formats fields and
drm_display_info_set_bus_formats helper function to specify the bus
formats supported by a given display.
This information can be used by display controller drivers to configure
the output interface appropriately (i.e. RGB565, RGB666 or RGB888 on raw
RGB or LVDS busses).
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Thierry Reding <treding@nvidia.com>
- Implement mode_fixup for a DI vertical timing limitation
- Use generic DRM OF helpers in DRM core
- Convert imx-hdmi to dw_hdmi drm_bridge and add rockchip
driver
- Add DC use counter to fix multi-display support
- Simplify handling of DI clock flags
- A few small fixes and cleanup
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=r9/P
-----END PGP SIGNATURE-----
Merge tag 'imx-drm-next-2015-01-09' of git://git.pengutronix.de/git/pza/linux into drm-next
imx-drm mode fixup support, imx-hdmi bridge conversion and imx-drm cleanup
- Implement mode_fixup for a DI vertical timing limitation
- Use generic DRM OF helpers in DRM core
- Convert imx-hdmi to dw_hdmi drm_bridge and add rockchip
driver
- Add DC use counter to fix multi-display support
- Simplify handling of DI clock flags
- A few small fixes and cleanup
* tag 'imx-drm-next-2015-01-09' of git://git.pengutronix.de/git/pza/linux: (26 commits)
imx-drm: core: handling of DI clock flags to ipu_crtc_mode_set()
gpu: ipu-di: Switch to DIV_ROUND_CLOSEST for DI clock divider calc
gpu: ipu-v3: Use videomode in struct ipu_di_signal_cfg
imx-drm: encoder prepare/mode_set must use adjusted mode
imx-drm: ipuv3-crtc: Implement mode_fixup
drm_modes: add drm_display_mode_to_videomode
gpu: ipu-di: remove some non-functional code
gpu: ipu-di: Add ipu_di_adjust_videomode()
drm: rockchip: export functions needed by rockchip dw_hdmi bridge driver
drm: bridge/dw_hdmi: request interrupt only after initializing the mutes
drm: bridge/dw_hdmi: add rockchip rk3288 support
dt-bindings: Add documentation for rockchip dw hdmi
drm: bridge/dw_hdmi: add function dw_hdmi_phy_enable_spare
drm: bridge/dw_hdmi: clear i2cmphy_stat0 reg in hdmi_phy_wait_i2c_done
drm: bridge/dw_hdmi: add mode_valid support
drm: bridge/dw_hdmi: add support for multi-byte register width access
dt-bindings: add document for dw_hdmi
drm: imx: imx-hdmi: move imx-hdmi to bridge/dw_hdmi
drm: imx: imx-hdmi: split phy configuration to platform driver
drm: imx: imx-hdmi: convert imx-hdmi to drm_bridge mode
...
Conflicts:
drivers/gpu/drm/i915/intel_runtime_pm.c
Separate branch so that Takashi can also pull just this refactoring
into sound-next.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
After switching to using the component interface this API isn't needed
any more.
v2-3: unchanged
v4:
- move the removal of i915_powerwell.h to this patch (Takashi)
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Register a component to be used to interface with the snd_hda_intel
driver. This is meant to replace the same interface that is currently
based on module symbol lookup.
v2:
- change roles between the hda and i915 components (Daniel)
- add the implementation to a new file (Jani)
- use better namespacing (Jani)
v3:
- move the implementation to intel_audio.c (Daniel)
- rename display_component to audio_component (Daniel)
- add kerneldoc (Daniel)
v4:
- run forgotten git rm i915_component.c (Jani)
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
- plane handling refactoring from Matt Roper and Gustavo Padovan in prep for
atomic updates
- fixes and more patches for the seqno to request transformation from John
- docbook for fbc from Rodrigo
- prep work for dual-link dsi from Gaurav Signh
- crc fixes from Ville
- special ggtt views infrastructure from Tvrtko Ursulin
- shadow patch copying for the cmd parser from Brad Volkin
- execlist and full ppgtt by default on gen8, for testing for now
* tag 'drm-intel-next-2014-12-19' of git://anongit.freedesktop.org/drm-intel: (131 commits)
drm/i915: Update DRIVER_DATE to 20141219
drm/i915: Hold runtime PM during plane commit
drm/i915: Organize bind_vma funcs
drm/i915: Organize INSTDONE report for future.
drm/i915: Organize PDP regs report for future.
drm/i915: Organize PPGTT init
drm/i915: Organize Fence registers for future enablement.
drm/i915: tame the chattermouth (v2)
drm/i915: Warn about missing context state workarounds only once
drm/i915: Use true PPGTT in Gen8+ when execlists are enabled
drm/i915: Skip gunit save/restore for cherryview
drm/i915/chv: Use timeout mode for RC6 on chv
drm/i915: Add GPGPU_THREADS_DISPATCHED to the register whitelist
drm/i915: Tidy up execbuffer command parsing code
drm/i915: Mark shadow batch buffers as purgeable
drm/i915: Use batch length instead of object size in command parser
drm/i915: Use batch pools with the command parser
drm/i915: Implement a framework for batch buffer pools
drm/i915: fix use after free during eDP encoder destroying
drm/i915/skl: Skylake also supports DP MST
...
Next batch of atomic work. Most important is the propertification from Rob
and the nth iteration of the actual atomic ioctl originally from Ville.
Big differences compared to earlier revisions:
- Core properties are now fully handled by the core, drivers can only
handle driver-specific properties.
- Atomic props&ioctl are opt-in per file_priv, userspace needs to
explicitly ask for it (like universal plane support).
- For now all hidden behind the atomic module option until this has
settled a bit.
- Atomic modesets are currently not possible since the exact abi for how
to handle the mode property is still under discussion.
Besides this some cleanup patches from me and the addition of per-object
state to global state backpointers to simplify drivers.
* tag 'topic/atomic-core-2015-01-05' of git://anongit.freedesktop.org/drm-intel:
drm: Ensure universal_planes is set for atomic
drm/atomic: Hide drm.ko internal interfaces
drm: Atomic modeset ioctl
drm/atomic: atomic connector properties
drm/atomic: atomic plane properties
drm: small property creation cleanup
drm/atomic: atomic_check functions
drm: add atomic properties
drm: refactor getproperties/getconnector
drm: tweak getconnector locking
drm: add atomic_get_property
drm: add atomic_set_property wrappers
drm: get rid of direct property value access
drm: store property instead of id in obj attachment
drm: allow property validation for refcnted props
drm/atomic: Introduce state->obj backpointers
drm/atomic-helper: Again check modeset *before* plane states
drm/atomic-helper: Export both plane and modeset check helpers
Misc drm patches with mostly polish patches from Thierry, with a bit of
generic mode validation from Ville and a few other oddball things.
* tag 'topic/core-stuff-2014-12-19' of git://anongit.freedesktop.org/drm-intel: (25 commits)
drm: Include drm_crtc_helper.h in DocBook
drm: Make drm_crtc_helper.h standalone includible
drm: Move IRQ related fields to proper section
drm: Remove stale comment
drm: Do basic sanity checks for user modes
drm: Perform basic sanity checks on probed modes
drm: Reorganize probed mode validation
drm/doc: Remove duplicate "by"
drm/info: Remove unused code
drm/cache: Use wbinvd helpers
drm/plane-helper: Test for plane disable earlier
drm/doc: Document drm_add_modes_noedid() usage
drm: bit of spell-check / editorializing.
drm: Prefer sizeof(type) over sizeof type
drm: Remove useless else block
drm: Remove unneeded braces for single statement blocks
drm: Do not assign in if condition
drm: Prefer kmalloc_array() over kmalloc() with multiply
drm: Prefer kcalloc() over kzalloc() with multiply
drm: Miscellaneous checkpatch whitespace cleanups
...
Add conversion from drm_display_mode to videomode.
Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Rockchip RK3288 hdmi is compatible with dw_hdmi
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Tested-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
the original imx hdmi driver is under drm/imx/,
which depends on imx-drm, so move the imx hdmi
driver out to drm/bridge and rename it to dw_hdmi
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Tested-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
This is just a bit fallout from patch polishing and moving the
get_prop logic fully into the core:
- Drop EXPORT_SYMBOL and make the helpers static.
- Drop kerneldoc since not used by drivers.
- Move the cross-file function declarations only used by drm.ko
internally to an internal header.
v2: keep the gist of the comments, requested by Rob.
Cc: Rob Clark <robdclark@gmail.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
The atomic modeset ioctl can be used to push any number of new values
for object properties. The driver can then check the full device
configuration as single unit, and try to apply the changes atomically.
The ioctl simply takes a list of object IDs and property IDs and their
values.
Originally based on a patch from Ville Syrjälä, although it has mutated
(mutilated?) enough since then that you probably shouldn't blame it on
him ;-)
The atomic support is hidden behind the DRM_CLIENT_CAP_ATOMIC cap (to
protect legacy userspace) and drm.atomic module param (for now).
v2: Check for file_priv->atomic to make sure we only allow userspace
in-the-know to use atomic.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Expose the core plane state as properties, so they can be updated via
atomic ioctl.
v2: atomic property flag
Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Once a driver is using atomic helpers for modeset, the next step is to
switch over to atomic properties. To do this, make sure that any
modeset objects have their ->atomic_{get,set}_property() vfuncs suitably
populated if they have custom properties (you did already remember to
plug in atomic-helper func for the legacy ->set_property() vfuncs,
right?), and then set DRIVER_ATOMIC bit in driver_features flag.
A new cap is introduced, DRM_CLIENT_CAP_ATOMIC, for the purposes of
shielding legacy userspace from atomic properties. Mostly for the
benefit of legacy DDX drivers that do silly things like getting/setting
each property at startup (since some of the new atomic properties will
be able to trigger modeset).
Signed-off-by: Rob Clark <robdclark@gmail.com>
[danvet: Squash in fixup patch to check for DRM_MODE_PROP_ATOMIC
instaed of the CAP define when filtering properties. Reported by
Tvrtko Uruslin, acked by Rob.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This reverts commit 355a701838.
This had some bad side effects under normal operation, and should
have been dropped earlier.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Since we won't be using the obj->properties->values[] array to shadow
property values for atomic drivers, we are going to need a vfunc for
getting prop values. Add that along w/ mandatory wrapper fxns.
v2: more comments and copypasta comment typo fix
Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
As we add properties for all the standard plane/crtc/connector
attributes (in preperation for the atomic ioctl), we are going to want
to handle core state in core (rather than per driver). Intercepting the
core properties will be easier if the atomic_set_property vfuncs are not
called directly, but instead have a mandatory wrapper function (which
will later serve as the point to intercept core properties).
v2: more verbose comments and copypasta comment fix
Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
There is already a section that describes the helpers implemented by
this module. Add the kerneldoc-generated structure descriptions to this
section.
While at it, add missing kerneldoc for the structures to avoid warnings
when generating the documentation.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The file refers to a bunch of structure declared in drm_crtc.h, so
include it to make sure the drm_crtc_helper.h header can be included
standalone.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The .irq and .irq_enabled fields are part of the VBLANK interrupt
handling infrastructure, so move them to the appropriate section within
the structure.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
For atomic drivers, we won't use the values array but instead shunt
things off to obj->atomic_get_property(). So to simplify things make
all read/write of properties values go through the accessors.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Keep property pointer, instead of id, in per mode-object attachments.
This will simplify things in later patches.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Useful since this way we can pass around just the state objects and
will get ther real object, too.
Specifically this allows us to again simplify the parameters for
set_crtc_for_plane.
v2: msm already has it's own specific plane_reset hook, don't forget
that one!
v3: Fixup kerneldoc, reported by 0-day builder.
Cc: Rob Clark <robdclark@gmail.com>
Reviewed-by: Rob Clark <robdclark@gmail.com> (v2)
Tested-by: Rob Clark <robdclark@gmail.com> (v2)
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
The default call sequence for these two parts won't fit for all
drivers. So export the two pieces and explain with a bit of kerneldoc
when each should be called.
v2: Squash in fixup from Rob to actually add the newly exported
functions to headers
Cc: Rob Clark <robdclark@gmail.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
The struct drm_connector_funcs kerneldoc refers to a part of struct
drm_crtc_funcs that no longer exists.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Make sure the timings of probed modes at least pass some very basic
sanity checks.
The checks include:
- clock,hdisplay,vdisplay are non zero
- sync pulse fits within the blanking period
- htotal,vtotal are big enough
I have not checked all the drivers to see if the modes the generate
might violate these constraints. I'm hoping not, because that would mean
either abandoning the idea of doing this from the core code, or fixing
the drivers.
I'm not entirely sure about limiting the sync pulse to the blanking
period. Intel hardware doesn't support such things, but some other
hardware might. However at least HDMI doesn't allow having sync pulse
edges within the active period, so I'm thinking the check is probably
OK to have in the common code.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Make drm_mode_validate_size() and drm_mode_validate_flag() deal with a
single mode instead of having each iterate through the mode list.
The hope is that in the future we might be able to share various mode
validation functions between modeset and get_modes.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This function is the KMS native variant of drm_vblank_count(). It takes
a struct drm_crtc * instead of a struct drm_device * and an index of the
CRTC.
Eventually the goal is to access vblank data through the CRTC only so
that the per-CRTC data can be moved to struct drm_crtc.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Thierry Reding <treding@nvidia.com>
This function is the KMS native variant of drm_handle_vblank(). It takes
a struct drm_crtc * instead of a struct drm_device * and an index of the
CRTC.
Eventually the goal is to access vblank data through the CRTC only so
that the per-CRTC data can be moved to struct drm_crtc.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Thierry Reding <treding@nvidia.com>
This function is the KMS native variant of drm_send_vblank_event(). It
takes a struct drm_crtc * instead of a struct drm_device * and an index
of the CRTC.
Eventually the goal is to access vblank data through the CRTC only so
that the per-CRTC data can be moved to struct drm_crtc.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Thierry Reding <treding@nvidia.com>
This adds fbdev/con support for tiled monitors, so that we
only set a mode on the correct half of the monitor, or
span the two halves if needed.
v2: remove unneeded ERROR, fix | vs ||
Signed-off-by: Dave Airlie <airlied@redhat.com>
This takes the tiling info from the connector and
exposes it to userspace, as a blob object in a
connector property.
The contents of the blob is ABI.
v2: add property + function documentation.
v3: move property setup from previous patch.
add boilerplate + fix long line (Daniel)
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This creates a tile group from DisplayID block, and
stores the pieces of parsed info from the DisplayID block
into the connector.
v2: add missing signoff, add new connector bits to docs.
v3: remove some debugging.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Logical ports are never going to have EDID changes,
they are used for the internal ports on MST monitors.
We cache the EDIDs from these to save time at MST probe.
v2: drop misplace tile property line, meant for other patch.
Signed-off-by: Dave Airlie <airlied@redhat.com>
A tile group is an identifier shared by a single monitor,
DisplayID topology has 8 bytes we can use for this, just
use those for now until something else comes up in the
future. We assign these to an idr and use the idr to
tell userspace what connectors are in the same tile group.
DisplayID v1.3 says the serial number must be unique for
displays from the same manufacturer.
v2:
destroy idr (dvdhrm)
add docbook (danvet)
airlied:- not sure how to make docbook add fns to tile group section.
v3: fix missing unlock.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
We need to get hdisplay and vdisplay in a few places so create a
helper to make our job easier.
Note that drm_crtc_check_viewport() and intel_modeset_pipe_config() were
previously making adjustments for doublescan modes and vscan > 1 modes,
which was incorrect. Using our new helper fixes this mistake.
v2 (by Matt): Use new stereo doubling function (suggested by Ville)
v3 (by Matt):
- Add missing kerneldoc (Daniel)
- Use drm_mode_copy() (Jani)
v4 (by Matt):
- Drop stereo doubling function again; add 'stereo only' flag
to drm_mode_set_crtcinfo() instead (Ville)
v5 (by Matt):
- Note behavioral change in drm_crtc_check_viewport() and
intel_modeset_pipe_config(). (Ander)
- Describe new adjustment flags in drm_mode_set_crtcinfo()'s
kerneldoc. (Ander)
Cc: dri-devel@lists.freedesktop.org
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Acked-by: Dave Airlie <airlied@gmail.com>
Reviewed-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This patch adds an optional list_head parameter to ttm_eu_reserve_buffers.
If specified duplicates in the execbuf list are no longer reported as errors,
but moved to this list instead.
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
So here's a pile of atomic fixes and improvements from various people.
There's still more patches in-flight, so I think I'll keep collecting them
in a separate branch.
* tag 'topic/core-stuff-2014-11-28' of git://anongit.freedesktop.org/drm-intel:
drm/atomic: clear plane's CRTC and FB when shutting down
drm: Handle atomic state properly in kms getfoo ioctl
drm: use mode_object_find helpers
drm: fix indentation
drm/msm: switch to atomic-helpers iterator macros
drm/atomic: add plane iterator macros
drm/atomic: track bitmask of planes attached to crtc
drm: Free atomic state during cleanup
drm: Make drm_atomic.h standalone includible
drm: Make drm_atomic_helper.h standalone includible
drm/plane: Add missing kerneldoc
drm/plane: Pass old state to ->atomic_update()
drm/atomic_helper: Cope with plane->crtc == NULL in disable helper
drm/atomic: Drop per-plane locking TODO
drm/atomic-helper: Skip vblank waits for unchanged fbs
drm: Document that drm_dev_alloc doesn't need a parent
Add helper macros to iterate the current, or incoming set of planes
attached to a crtc. These helpers are only available for drivers
converted to use atomic-helpers.
Signed-off-by: Rob Clark <robdclark@gmail.com>
[danvet: Squash in fixup from Rob to move the planemask iterator to
drm_crtc.h and document it. That one is needed by the atomic ioctl so
can't be in a helper library.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
