On certain platforms not all planes support the same set of
rotations/reflections, so let's use the per-plane property
for this.
This is already a problem on SKL when we use the legay cursor plane
as it only supports 0|180 whereas the universal planes support
0|90|180|270, and it will be a problem on CHV soon.
v2: Use drm_plane_create_rotation_property() helper
v3: Drop the BIT(), use INTEL_GEN()
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (v1)
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1474907460-10717-12-git-send-email-ville.syrjala@linux.intel.com
We have intel_rotation_90_or_270() in i915 to check if the rotation is
90 or 270 degrees. Similar checks are elsewhere in drm, so let's move
the helper into a central place and use it everwhere.
v2: Drop the BIT()
Convert all new intel_rotation_90_or_270() calls
Deal with superfluous code shuffling
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (v1)
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1474907460-10717-2-git-send-email-ville.syrjala@linux.intel.com
The introduction of reference counting on the state structures caused
sanitize_watermarks() in i915 to break in the error handling case,
as pointed out by gcc -Wmaybe-uninitialized
drivers/gpu/drm/i915/intel_display.c: In function ‘intel_modeset_init’:
include/drm/drm_atomic.h:224:2: error: ‘state’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
This changes the function back to only drop the reference count
when it was successfully allocated first.
Fixes: 0853695c3b ("drm: Add reference counting to drm_atomic_state")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161018151652.2690201-1-arnd@arndb.de
drm_atomic_state has a complicated single owner model that tracks the
single reference from allocation through to destruction on another
thread - or perhaps on a local error path. We can simplify this tracking
by using reference counting (at a cost of a few more atomics). This is
even more beneficial when the lifetime of the state becomes more
convoluted than being passed to a single worker thread for the commit.
v2: Double check !intel atomic_commit functions for missing gets
v3: Update kerneldocs
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161014121833.439-27-chris@chris-wilson.co.uk
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJX6H4uAAoJEHm+PkMAQRiG5sMH/3yzrMiUCSokdS+cvY+jgKAG
JS58JmRvBPz2mRaU3MRPBGRDeCz/Nc9LggL2ZcgM+E1ZYirlYyQfIED3lkqk5R07
kIN1wmb+kQhXyU4IY3fEX7joqyKC6zOy4DUChPkBQU0/0+VUmdVmcJvsuPlnMZtf
g95m0BdYTui+eDezASRqOEp3Lb5ONL4c3ao4yBP0LHF033ctj3VJQiyi5uERPZJ0
5e6Mo7Wxn78t9WqJLQAiEH46kTwT2plNlxf3XXqTenfIdbWhqE873HPGeSMa3VQV
VywXTpCpSPQsA8BYg66qIbebdKOhs9MOviHVfqDtwQlvwhjlBDya0gNHfI5fSy4=
=Y/L5
-----END PGP SIGNATURE-----
Merge tag 'v4.8-rc8' into drm-next
Linux 4.8-rc8
There was a lot of fallout in the imx/amdgpu/i915 drivers, so backmerge
it now to avoid troubles.
* tag 'v4.8-rc8': (1442 commits)
Linux 4.8-rc8
fault_in_multipages_readable() throws set-but-unused error
mm: check VMA flags to avoid invalid PROT_NONE NUMA balancing
radix tree: fix sibling entry handling in radix_tree_descend()
radix tree test suite: Test radix_tree_replace_slot() for multiorder entries
fix memory leaks in tracing_buffers_splice_read()
tracing: Move mutex to protect against resetting of seq data
MIPS: Fix delay slot emulation count in debugfs
MIPS: SMP: Fix possibility of deadlock when bringing CPUs online
mm: delete unnecessary and unsafe init_tlb_ubc()
huge tmpfs: fix Committed_AS leak
shmem: fix tmpfs to handle the huge= option properly
blk-mq: skip unmapped queues in blk_mq_alloc_request_hctx
MIPS: Fix pre-r6 emulation FPU initialisation
arm64: kgdb: handle read-only text / modules
arm64: Call numa_store_cpu_info() earlier.
locking/hung_task: Fix typo in CONFIG_DETECT_HUNG_TASK help text
nvme-rdma: only clear queue flags after successful connect
i2c: qup: skip qup_i2c_suspend if the device is already runtime suspended
perf/core: Limit matching exclusive events to one PMU
...
- refactor the sseu code (Imre)
- refine guc dmesg output (Dave Gordon)
- more vgpu work
- more skl wm fixes (Lyude)
- refactor dpll code in prep for upfront link training (Jim Bride et al)
- consolidate all platform feature checks into intel_device_info (Carlos Santa)
- refactor elsp/execlist submission as prep for re-submission after hang
recovery and eventually scheduling (Chris Wilson)
- allow synchronous gpu reset handling, to remove tricky/impossible/fragile
error recovery code (Chris Wilson)
- prep work for nonblocking (execlist) submission, using fences to track
depencies and drive elsp submission (Chris Wilson)
- partial error recover/resubmission of non-guilty batches after hangs (Chris Wilson)
- full dma-buf implicit fencing support (Chris Wilson)
- dp link training fixes (Jim, Dhinkaran, Navare, ...)
- obey dp branch device pixel rate/bpc/clock limits (Mika Kahola), needed for
many vga dongles
- bunch of small cleanups and polish all over, as usual
[airlied: printing macros collided]
* tag 'drm-intel-next-2016-09-19' of git://anongit.freedesktop.org/drm-intel: (163 commits)
drm/i915: Update DRIVER_DATE to 20160919
drm: Fix DisplayPort branch device ID kernel-doc
drm/i915: use NULL for NULL pointers
drm/i915: do not use 'false' as a NULL pointer
drm/i915: make intel_dp_compute_bpp static
drm: Add DP branch device info on debugfs
drm/i915: Update bits per component for display info
drm/i915: Check pixel rate for DP to VGA dongle
drm/i915: Read DP branch device SW revision
drm/i915: Read DP branch device HW revision
drm/i915: Cleanup DisplayPort AUX channel initialization
drm: Read DP branch device id
drm: Helper to read max bits per component
drm: Helper to read max clock rate
drm: Drop VGA from bpc definitions
drm: Add missing DP downstream port types
drm/i915: Add ddb size field to device info structure
drm/i915/guc: general tidying up (submission)
drm/i915/guc: general tidying up (loader)
drm/i915: clarify PMINTRMSK/pm_intr_keep usage
...
We are about to specialize object synchronisation to enable nonblocking
execbuf submission. First we make a copy of the current object
synchronisation for execbuffer. The general i915_gem_object_sync() will
be removed following the removal of CS flips in the near future.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: John Harrison <john.c.harrison@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160909131201.16673-16-chris@chris-wilson.co.uk
In preparation for introducing a per-engine reset, we can first separate
the mixing of the reset state from the global reset counter.
The loss of atomicity in updating the reset state poses a small problem
for handling the waiters. For requests, this is solved by advancing the
seqno so that a waiter waking up after the reset knows the request is
complete. For pending flips, we still rely on the increment of the
global reset epoch (as well as the reset-in-progress flag) to signify
when the hardware was reset.
The advantage, now that we do not inspect the reset state during reset
itself i.e. we no longer emit requests during reset, is that we can use
the atomic updates of the state flags to ensure that only one reset
worker is active.
v2: Mika spotted that I transformed the i915_gem_wait_for_error() wakeup
into a waiter wakeup.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Arun Siluvery <arun.siluvery@linux.intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470414607-32453-6-git-send-email-arun.siluvery@linux.intel.com
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160909131201.16673-7-chris@chris-wilson.co.uk
The value of ddi_pll_sel is derived from the selection of shared dpll,
so just calculate the final value when necessary.
v2: Actually remove it from crtc state and delete remaining usages. (CI)
Reviewed-by: Durgadoss R <durgadoss.r@intel.com>
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
i915 sometimes needs to disable planes in the middle of an atomic
commit, and then reenable them later in the same commit. Because of
this, we can't make the assumption that the state of the plane actually
changed. Since the state of the plane hasn't actually changed, neither
have it's watermarks. And if the watermarks hasn't changed then we
haven't populated skl_results with anything, which means we'll end up
zeroing out a plane's watermarks in the middle of the atomic commit
without restoring them later.
Simple reproduction recipe:
- Get a SKL laptop, launch any kind of X session
- Get two extra monitors
- Keep hotplugging both displays (so that the display configuration
jumps from 1 active pipe to 3 active pipes and back)
- Eventually underrun
Changes since v1:
- Fix incorrect use of "it's"
Changes since v2:
- Add reproduction recipe
Signed-off-by: Lyude <cpaul@redhat.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Fixes: 62e0fb8801 ("drm/i915/skl: Update plane watermarks atomically during plane updates")
Signed-off-by: Lyude <cpaul@redhat.com>
Testcase: kms_plane
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1472488288-27280-1-git-send-email-cpaul@redhat.com
Cc: drm-intel-fixes@lists.freedesktop.org
The last user of for_each_intel_crtc_masked macro was removed in
commit 0a9ab303b8
Author: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Date: Tue Apr 21 17:13:04 2015 +0300
drm/i915: Remove all *_pipes flags from modeset
Get rid of the unused macro.
Cc: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1472126651-13825-1-git-send-email-jani.nikula@intel.com
Now that we can hook into update_crtcs and control the order in which we
update CRTCs at each modeset, we can finish the final step of fixing
Skylake's watermark handling by performing DDB updates at the same time
as plane updates and watermark updates.
The first major change in this patch is skl_update_crtcs(), which
handles ensuring that we order each CRTC update in our atomic commits
properly so that they honor the DDB flush order.
The second major change in this patch is the order in which we flush the
pipes. While the previous order may have worked, it can't be used in
this approach since it no longer will do the right thing. For example,
using the old ddb flush order:
We have pipes A, B, and C enabled, and we're disabling C. Initial ddb
allocation looks like this:
| A | B |xxxxxxx|
Since we're performing the ddb updates after performing any CRTC
disablements in intel_atomic_commit_tail(), the space to the right of
pipe B is unallocated.
1. Flush pipes with new allocation contained into old space. None
apply, so we skip this
2. Flush pipes having their allocation reduced, but overlapping with a
previous allocation. None apply, so we also skip this
3. Flush pipes that got more space allocated. This applies to A and B,
giving us the following update order: A, B
This is wrong, since updating pipe A first will cause it to overlap with
B and potentially burst into flames. Our new order (see the code
comments for details) would update the pipes in the proper order: B, A.
As well, we calculate the order for each DDB update during the check
phase, and reference it later in the commit phase when we hit
skl_update_crtcs().
This long overdue patch fixes the rest of the underruns on Skylake.
Changes since v1:
- Add skl_ddb_entry_write() for cursor into skl_write_cursor_wm()
Changes since v2:
- Use the method for updating CRTCs that Ville suggested
- In skl_update_wm(), only copy the watermarks for the crtc that was
passed to us
Changes since v3:
- Small comment fix in skl_ddb_allocation_overlaps()
Changes since v4:
- Remove the second loop in intel_update_crtcs() and use Ville's
suggestion for updating the ddb allocations in the right order
- Get rid of the second loop and just use the ddb state as it updates
to determine what order to update everything in (thanks for the
suggestion Ville)
- Simplify skl_ddb_allocation_overlaps()
- Split actual overlap checking into it's own helper
Fixes: 0e8fb7ba7c ("drm/i915/skl: Flush the WM configuration")
Fixes: 8211bd5bdf ("drm/i915/skl: Program the DDB allocation")
[omitting CC for stable, since this patch will need to be changed for
such backports first]
Testcase: kms_cursor_legacy
Testcase: plane-all-modeset-transition
Signed-off-by: Lyude <cpaul@redhat.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1471961565-28540-2-git-send-email-cpaul@redhat.com
Since we have to write ddb allocations at the same time as we do other
plane updates, we're going to need to be able to control the order in
which we execute modesets on each pipe. The easiest way to do this is to
just factor this section of intel_atomic_commit_tail()
(intel_atomic_commit() for stable branches) into it's own function, and
add an appropriate display function hook for it.
Based off of Matt Rope's suggestions
Changes since v1:
- Drop pipe_config->base.active check in intel_update_crtcs() since we
check that before calling the function
Signed-off-by: Lyude <cpaul@redhat.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
[omitting CC for stable, since this patch will need to be changed for
such backports first]
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Lyude <cpaul@redhat.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1471961565-28540-1-git-send-email-cpaul@redhat.com
drm-intel-next-2016-08-22:
- bugfixes and cleanups for rcu-protected requests (Chris)
- atomic modeset fixes for gpu reset on pre-g4x (Maarten&Ville)
- guc submission improvements (Dave Gordon)
- panel power sequence cleanup (Imre)
- better use of stolen and unmappable ggtt (Chris), plus prep work to make that
happen
- rework of framebuffer offsets, prep for multi-plane framebuffers (Ville)
- fully partial ggtt vmaps, including fenced ones (Chris)
- move lots more of the gem tracking from the object to the vma (Chris)
- tune the command parser (Chris)
- allow fbc without fences on recent platforms (Chris)
- fbc frontbuffer tracking fixes (Chris)
- fast prefaulting using io-mappping.h pgprot caching (Chris)
* 'drm-intel-next' of git://anongit.freedesktop.org/drm-intel: (141 commits)
io-mapping: Fixup for different names of writecombine
io-mapping.h: s/PAGE_KERNEL_IO/PAGE_KERNEL/
drm/i915: Update DRIVER_DATE to 20160822
drm/i915: Use remap_io_mapping() to prefault all PTE in a single pass
drm/i915: Embed the io-mapping struct inside drm_i915_private
io-mapping: Always create a struct to hold metadata about the io-mapping
drm/i915/fbc: Allow on unfenced surfaces, for recent gen
drm/i915/fbc: Don't set an illegal fence if unfenced
drm/i915: Flush delayed fence releases after reset
drm/i915: Reattach comment, complete type specification
drm/i915/cmdparser: Accelerate copies from WC memory
drm/i915/cmdparser: Use binary search for faster register lookup
drm/i915/cmdparser: Check for SKIP descriptors first
drm/i915/cmdparser: Compare against the previous command descriptor
drm/i915/cmdparser: Improve hash function
drm/i915/cmdparser: Only cache the dst vmap
drm/i915/cmdparser: Use cached vmappings
drm/i915/cmdparser: Add the TIMESTAMP register for the other engines
drm/i915/cmdparser: Make initialisation failure non-fatal
drm/i915: Stop discarding GTT cache-domain on unbind vma
...
The D_COMP (render decompression) register write is followed by a status
check and another error (either that the decompression shutdown or the
lpll is enabled). Since we are followed by another, more pertinent,
error we can reduce the pcode timeout to a debug and squelch a sporadic
error message during suspend.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97465
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20160824101607.13671-1-chris@chris-wilson.co.uk
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
We need to free the allocated intel_fb in the error path, not
intel_fb->base. Otherwise we risk calling kfree with a non-kmalloc'd
address, which is bound to give us grief at some point.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1471964444-24460-1-git-send-email-matthew.auld@intel.com
Instead of iterating overthe connectors manually, run the last part of
DDI disabling inside the crt post disable function.
This was meant to be addressed before submitting the other commit,
but I missed the review comments.
Fixes: fd6bbda9c7 ("drm/i915: Pass crtc_state and connector_state to encoder functions")
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1471961888-10771-2-git-send-email-maarten.lankhorst@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
[mlankhorst: Fix extra whitespace between functions.]
This makes the code in intel_sanitize_encoder slightly more readable.
This was meant to be addressed in fd6bbda9c7, but I missed that
review comment.
Fixes: fd6bbda9c7 ("drm/i915: Pass crtc_state and connector_state to encoder functions")
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1471961888-10771-1-git-send-email-maarten.lankhorst@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
[mlankhorst: Fix unused variable reported by kbuild.]
Thanks to Ville for suggesting this as a potential solution to pipe
underruns on Skylake.
On Skylake all of the registers for configuring planes, including the
registers for configuring their watermarks, are double buffered. New
values written to them won't take effect until said registers are
"armed", which is done by writing to the PLANE_SURF (or in the case of
cursor planes, the CURBASE register) register.
With this in mind, up until now we've been updating watermarks on skl
like this:
non-modeset {
- calculate (during atomic check phase)
- finish_atomic_commit:
- intel_pre_plane_update:
- intel_update_watermarks()
- {vblank happens; new watermarks + old plane values => underrun }
- drm_atomic_helper_commit_planes_on_crtc:
- start vblank evasion
- write new plane registers
- end vblank evasion
}
or
modeset {
- calculate (during atomic check phase)
- finish_atomic_commit:
- crtc_enable:
- intel_update_watermarks()
- {vblank happens; new watermarks + old plane values => underrun }
- drm_atomic_helper_commit_planes_on_crtc:
- start vblank evasion
- write new plane registers
- end vblank evasion
}
Now we update watermarks atomically like this:
non-modeset {
- calculate (during atomic check phase)
- finish_atomic_commit:
- intel_pre_plane_update:
- intel_update_watermarks() (wm values aren't written yet)
- drm_atomic_helper_commit_planes_on_crtc:
- start vblank evasion
- write new plane registers
- write new wm values
- end vblank evasion
}
modeset {
- calculate (during atomic check phase)
- finish_atomic_commit:
- crtc_enable:
- intel_update_watermarks() (actual wm values aren't written
yet)
- drm_atomic_helper_commit_planes_on_crtc:
- start vblank evasion
- write new plane registers
- write new wm values
- end vblank evasion
}
So this patch moves all of the watermark writes into the right place;
inside of the vblank evasion where we update all of the registers for
each plane. While this patch doesn't fix everything, it does allow us to
update the watermark values in the way the hardware expects us to.
Changes since original patch series:
- Remove mutex_lock/mutex_unlock since they don't do anything and we're
not touching global state
- Move skl_write_cursor_wm/skl_write_plane_wm functions into
intel_pm.c, make externally visible
- Add skl_write_plane_wm calls to skl_update_plane
- Fix conditional for for loop in skl_write_plane_wm (level < max_level
should be level <= max_level)
- Make diagram in commit more accurate to what's actually happening
- Add Fixes:
Changes since v1:
- Use IS_GEN9() instead of IS_SKYLAKE() since these fixes apply to more
then just Skylake
- Update description to make it clear this patch doesn't fix everything
- Check if pipes were actually changed before writing watermarks
Changes since v2:
- Write PIPE_WM_LINETIME during vblank evasion
Changes since v3:
- Rebase against new SAGV patch changes
Changes since v4:
- Add a parameter to choose what skl_wm_values struct to use when
writing new plane watermarks
Changes since v5:
- Remove cursor ddb entry write in skl_write_cursor_wm(), defer until
patch 6
- Write WM_LINETIME in intel_begin_crtc_commit()
Changes since v6:
- Remove redundant dirty_pipes check in skl_write_plane_wm (we check
this in all places where we call this function, and it was supposed
to have been removed earlier anyway)
- In i9xx_update_cursor(), use dev_priv->info.gen >= 9 instead of
IS_GEN9(dev_priv). We do this everywhere else and I'd imagine this
needs to be done for gen10 as well
Changes since v7:
- Fix rebase fail (unused variable obj)
- Make struct skl_wm_values *wm const
- Fix indenting
- Use INTEL_GEN() instead of dev_priv->info.gen
Changes since v8:
- Don't forget calls to skl_write_plane_wm() when disabling planes
- Use INTEL_GEN(), not INTEL_INFO()->gen in intel_begin_crtc_commit()
Fixes: 2d41c0b59a ("drm/i915/skl: SKL Watermark Computation")
Signed-off-by: Lyude <cpaul@redhat.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Cc: stable@vger.kernel.org
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1471884608-10671-1-git-send-email-cpaul@redhat.com
Link: http://patchwork.freedesktop.org/patch/msgid/1471884608-10671-1-git-send-email-cpaul@redhat.com
This is mostly code churn, with exception of a few places:
- intel_display.c has changes in intel_sanitize_encoder
- intel_ddi.c has intel_ddi_fdi_disable calling intel_ddi_post_disable,
and required a function change. Also affects intel_display.c
- intel_dp_mst.c passes a NULL crtc_state and conn_state to
intel_ddi_post_disable for shutting down the real encoder.
If we would pass conn_state, then conn_state->connector !=
intel_dig_port->connector and conn_state->best_encoder !=
to_intel_encoder(intel_dig_port).
We also shouldn't pass crtc_state, because in that case the
disabling sequence may potentially be different depending on
which crtc is disabled last. Nice way to introduce bugs.
No other functional changes are done, diff stat is already huge.
Each encoder type will need to be fixed to use the atomic states
separately.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470755054-32699-6-git-send-email-maarten.lankhorst@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This cleans up another possible use of the connector list,
encoder->crtc is legacy state and should not be used.
With the atomic state as argument it's easy to find the encoder from
the connector it belongs to.
intel_opregion_notify_encoder is a noop for !HAS_DDI, so it's harmless
to unconditionally include it in encoder enable/disable.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470755054-32699-5-git-send-email-maarten.lankhorst@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This is required for supporting nonblocking modesets. Iterating over
the connector list will no longer be allowed when we don't hold
connection_mutex, so we have to use the atomic state.
Fix disable_noatomic by populating the minimal state required to
disable a connector.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470755054-32699-3-git-send-email-maarten.lankhorst@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Since the watermark calculations for Skylake are still broken, we're apt
to hitting underruns very easily under multi-monitor configurations.
While it would be lovely if this was fixed, it's not. Another problem
that's been coming from this however, is the mysterious issue of
underruns causing full system hangs. An easy way to reproduce this with
a skylake system:
- Get a laptop with a skylake GPU, and hook up two external monitors to
it
- Move the cursor from the built-in LCD to one of the external displays
as quickly as you can
- You'll get a few pipe underruns, and eventually the entire system will
just freeze.
After doing a lot of investigation and reading through the bspec, I
found the existence of the SAGV, which is responsible for adjusting the
system agent voltage and clock frequencies depending on how much power
we need. According to the bspec:
"The display engine access to system memory is blocked during the
adjustment time. SAGV defaults to enabled. Software must use the
GT-driver pcode mailbox to disable SAGV when the display engine is not
able to tolerate the blocking time."
The rest of the bspec goes on to explain that software can simply leave
the SAGV enabled, and disable it when we use interlaced pipes/have more
then one pipe active.
Sure enough, with this patchset the system hangs resulting from pipe
underruns on Skylake have completely vanished on my T460s. Additionally,
the bspec mentions turning off the SAGV with more then one pipe enabled
as a workaround for display underruns. While this patch doesn't entirely
fix that, it looks like it does improve the situation a little bit so
it's likely this is going to be required to make watermarks on Skylake
fully functional.
This will still need additional work in the future: we shouldn't be
enabling the SAGV if any of the currently enabled planes can't enable WM
levels that introduce latencies >= 30 µs.
Changes since v11:
- Add skl_can_enable_sagv()
- Make sure we don't enable SAGV when not all planes can enable
watermarks >= the SAGV engine block time. I was originally going to
save this for later, but I recently managed to run into a machine
that was having problems with a single pipe configuration + SAGV.
- Make comparisons to I915_SKL_SAGV_NOT_CONTROLLED explicit
- Change I915_SAGV_DYNAMIC_FREQ to I915_SAGV_ENABLE
- Move printks outside of mutexes
- Don't print error messages twice
Changes since v10:
- Apparently sandybridge_pcode_read actually writes values and reads
them back, despite it's misleading function name. This means we've
been doing this mostly wrong and have been writing garbage to the
SAGV control. Because of this, we no longer attempt to read the SAGV
status during initialization (since there are no helpers for this).
- mlankhorst noticed that this patch was breaking on some very early
pre-release Skylake machines, which apparently don't allow you to
disable the SAGV. To prevent machines from failing tests due to SAGV
errors, if the first time we try to control the SAGV results in the
mailbox indicating an invalid command, we just disable future attempts
to control the SAGV state by setting dev_priv->skl_sagv_status to
I915_SKL_SAGV_NOT_CONTROLLED and make a note of it in dmesg.
- Move mutex_unlock() a little higher in skl_enable_sagv(). This
doesn't actually fix anything, but lets us release the lock a little
sooner since we're finished with it.
Changes since v9:
- Only enable/disable sagv on Skylake
Changes since v8:
- Add intel_state->modeset guard to the conditional for
skl_enable_sagv()
Changes since v7:
- Remove GEN9_SAGV_LOW_FREQ, replace with GEN9_SAGV_IS_ENABLED (that's
all we use it for anyway)
- Use GEN9_SAGV_IS_ENABLED instead of 0x1 for clarification
- Fix a styling error that snuck past me
Changes since v6:
- Protect skl_enable_sagv() with intel_state->modeset conditional in
intel_atomic_commit_tail()
Changes since v5:
- Don't use is_power_of_2. Makes things confusing
- Don't use the old state to figure out whether or not to
enable/disable the sagv, use the new one
- Split the loop in skl_disable_sagv into it's own function
- Move skl_sagv_enable/disable() calls into intel_atomic_commit_tail()
Changes since v4:
- Use is_power_of_2 against active_crtcs to check whether we have > 1
pipe enabled
- Fix skl_sagv_get_hw_state(): (temp & 0x1) indicates disabled, 0x0
enabled
- Call skl_sagv_enable/disable() from pre/post-plane updates
Changes since v3:
- Use time_before() to compare timeout to jiffies
Changes since v2:
- Really apply minor style nitpicks to patch this time
Changes since v1:
- Added comments about this probably being one of the requirements to
fixing Skylake's watermark issues
- Minor style nitpicks from Matt Roper
- Disable these functions on Broxton, since it doesn't have an SAGV
Signed-off-by: Lyude <cpaul@redhat.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1471463761-26796-3-git-send-email-cpaul@redhat.com
[mlankhorst: ENOSYS -> ENXIO, whitespace fixes]
(cherry picked from commit 656d1b89e5)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
In an effort to simplify things for a future push of dev_priv instead
of dev wherever possible, always take pdev via dev_priv where
feasible, eliminating the direct access from dev. Right now this
only eliminates a few cases of dev, but it also obviates that we pass
dev into a lot of functions where dev_priv would be the more obvious
choice.
v2: Fixed one more place missing in the previous patch set
Signed-off-by: David Weinehall <david.weinehall@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160822103245.24069-5-david.weinehall@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Since the watermark calculations for Skylake are still broken, we're apt
to hitting underruns very easily under multi-monitor configurations.
While it would be lovely if this was fixed, it's not. Another problem
that's been coming from this however, is the mysterious issue of
underruns causing full system hangs. An easy way to reproduce this with
a skylake system:
- Get a laptop with a skylake GPU, and hook up two external monitors to
it
- Move the cursor from the built-in LCD to one of the external displays
as quickly as you can
- You'll get a few pipe underruns, and eventually the entire system will
just freeze.
After doing a lot of investigation and reading through the bspec, I
found the existence of the SAGV, which is responsible for adjusting the
system agent voltage and clock frequencies depending on how much power
we need. According to the bspec:
"The display engine access to system memory is blocked during the
adjustment time. SAGV defaults to enabled. Software must use the
GT-driver pcode mailbox to disable SAGV when the display engine is not
able to tolerate the blocking time."
The rest of the bspec goes on to explain that software can simply leave
the SAGV enabled, and disable it when we use interlaced pipes/have more
then one pipe active.
Sure enough, with this patchset the system hangs resulting from pipe
underruns on Skylake have completely vanished on my T460s. Additionally,
the bspec mentions turning off the SAGV with more then one pipe enabled
as a workaround for display underruns. While this patch doesn't entirely
fix that, it looks like it does improve the situation a little bit so
it's likely this is going to be required to make watermarks on Skylake
fully functional.
This will still need additional work in the future: we shouldn't be
enabling the SAGV if any of the currently enabled planes can't enable WM
levels that introduce latencies >= 30 µs.
Changes since v11:
- Add skl_can_enable_sagv()
- Make sure we don't enable SAGV when not all planes can enable
watermarks >= the SAGV engine block time. I was originally going to
save this for later, but I recently managed to run into a machine
that was having problems with a single pipe configuration + SAGV.
- Make comparisons to I915_SKL_SAGV_NOT_CONTROLLED explicit
- Change I915_SAGV_DYNAMIC_FREQ to I915_SAGV_ENABLE
- Move printks outside of mutexes
- Don't print error messages twice
Changes since v10:
- Apparently sandybridge_pcode_read actually writes values and reads
them back, despite it's misleading function name. This means we've
been doing this mostly wrong and have been writing garbage to the
SAGV control. Because of this, we no longer attempt to read the SAGV
status during initialization (since there are no helpers for this).
- mlankhorst noticed that this patch was breaking on some very early
pre-release Skylake machines, which apparently don't allow you to
disable the SAGV. To prevent machines from failing tests due to SAGV
errors, if the first time we try to control the SAGV results in the
mailbox indicating an invalid command, we just disable future attempts
to control the SAGV state by setting dev_priv->skl_sagv_status to
I915_SKL_SAGV_NOT_CONTROLLED and make a note of it in dmesg.
- Move mutex_unlock() a little higher in skl_enable_sagv(). This
doesn't actually fix anything, but lets us release the lock a little
sooner since we're finished with it.
Changes since v9:
- Only enable/disable sagv on Skylake
Changes since v8:
- Add intel_state->modeset guard to the conditional for
skl_enable_sagv()
Changes since v7:
- Remove GEN9_SAGV_LOW_FREQ, replace with GEN9_SAGV_IS_ENABLED (that's
all we use it for anyway)
- Use GEN9_SAGV_IS_ENABLED instead of 0x1 for clarification
- Fix a styling error that snuck past me
Changes since v6:
- Protect skl_enable_sagv() with intel_state->modeset conditional in
intel_atomic_commit_tail()
Changes since v5:
- Don't use is_power_of_2. Makes things confusing
- Don't use the old state to figure out whether or not to
enable/disable the sagv, use the new one
- Split the loop in skl_disable_sagv into it's own function
- Move skl_sagv_enable/disable() calls into intel_atomic_commit_tail()
Changes since v4:
- Use is_power_of_2 against active_crtcs to check whether we have > 1
pipe enabled
- Fix skl_sagv_get_hw_state(): (temp & 0x1) indicates disabled, 0x0
enabled
- Call skl_sagv_enable/disable() from pre/post-plane updates
Changes since v3:
- Use time_before() to compare timeout to jiffies
Changes since v2:
- Really apply minor style nitpicks to patch this time
Changes since v1:
- Added comments about this probably being one of the requirements to
fixing Skylake's watermark issues
- Minor style nitpicks from Matt Roper
- Disable these functions on Broxton, since it doesn't have an SAGV
Signed-off-by: Lyude <cpaul@redhat.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1471463761-26796-3-git-send-email-cpaul@redhat.com
[mlankhorst: ENOSYS -> ENXIO, whitespace fixes]
intel_fbc_pre_update() depends upon the new state being already pinned
in place in the Global GTT (primarily for both fencing which wants both
an offset and a fence register, if assigned). This requires the call to
intel_fbc_pre_update() be after intel_pin_and_fence_fb() - but commit
e8216e502a ("drm/i915/fbc: call intel_fbc_pre_update earlier during
page flips") moved the code way too much up in its attempt to call it
before the page flip.
v2 (from Paulo):
- Point the original bad commit.
- Add a comment to maybe prevent further regressions.
Fixes: e8216e502a ("drm/i915/fbc: call intel_fbc_pre_update earlier...")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Patrik Jakobsson <patrik.jakobsson@linux.intel.com>
Cc: drm-intel-fixes@lists.freedesktop.org
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1471462904-842-1-git-send-email-paulo.r.zanoni@intel.com
Cc: stable@vger.kernel.org
The drivers have to modify the atomic plane state during the prepare_fb
callback so they track allocations, reservations and dependencies for
this atomic operation involving this fb. In particular, how else do we
set the plane->fence from the framebuffer!
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20160818180017.20508-1-chris@chris-wilson.co.uk
Collection of i915 fixes.
* tag 'drm-intel-fixes-2016-08-15' of git://anongit.freedesktop.org/drm-intel:
drm/i915: Fix modeset handling during gpu reset, v5.
drm/i915: fix aliasing_ppgtt leak
drm/i915: fix WaInsertDummyPushConstPs
drm/i915: Fix iboost setting for SKL Y/U DP DDI buffer translation entry 2
drm/i915/gen9: Give one extra block per line for SKL plane WM calculations
drm/i915: Acquire audio powerwell for HD-Audio registers
drm/i915: Add missing rpm wakelock to GGTT pread
drm/i915/fbc: FBC causes display flicker when VT-d is enabled on Skylake
drm/i915: Clean up the extra RPM ref on CHV with i915.enable_rc6=0
drm/i915: Program iboost settings for HDMI/DVI on SKL
drm/i915: Fix iboost setting for DDI with 4 lanes on SKL
drm/i915: Handle ENOSPC after failing to insert a mappable node
drm/i915: Flush GT idle status upon reset
In order to handle tiled partial GTT mmappings, we need to associate the
fence with an individual vma.
v2: A couple of silly drops replaced spotted by Joonas
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160818161718.27187-21-chris@chris-wilson.co.uk
By moving map-and-fenceable tracking from the object to the VMA, we gain
fine-grained tracking and the ability to track individual fences on the VMA
(subsequent patch).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160818161718.27187-16-chris@chris-wilson.co.uk
Signed-off-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This little helper only exists to safely discard the upper unused 32bits
of the general 64-bit VMA address - as we know that all Global GTT
currently are less than 4GiB in size and so that the upper bits must be
zero. In many places, we use a u32 for the global GTT offset and we want
to document where we are discarding the full VMA offset.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1471254551-25805-28-git-send-email-chris@chris-wilson.co.uk
Treat the VMA as the primary struct responsible for tracking bindings
into the GPU's VM. That is we want to treat the VMA returned after we
pin an object into the VM as the cookie we hold and eventually release
when unpinning. Doing so eliminates the ambiguity in pinning the object
and then searching for the relevant pin later.
v2: Joonas' stylistic nitpicks, a fun rebase.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1471254551-25805-27-git-send-email-chris@chris-wilson.co.uk
Backmerge because too many conflicts, and also we need to get at the
latest struct fence patches from Gustavo. Requested by Chris Wilson.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Eric Engestrom <eric@engestrom.ch>
[danvet: Clarify that the returned pointer must be freed with
kfree().]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
- refactor ddi buffer programming a bit (Ville)
- large-scale renaming to untangle naming in the gem code (Chris)
- rework vma/active tracking for accurately reaping idle mappings of shared
objects (Chris)
- misc dp sst/mst probing corner case fixes (Ville)
- tons of cleanup&tunings all around in gem
- lockless (rcu-protected) request lookup, plus use it everywhere for
non(b)locking waits (Chris)
- pipe crc debugfs fixes (Rodrigo)
- random fixes all over
* tag 'drm-intel-next-2016-08-08' of git://anongit.freedesktop.org/drm-intel: (222 commits)
drm/i915: Update DRIVER_DATE to 20160808
drm/i915: fix aliasing_ppgtt leak
drm/i915: Update comment before i915_spin_request
drm/i915: Use drm official vblank_no_hw_counter callback.
drm/i915: Fix copy_to_user usage for pipe_crc
Revert "drm/i915: Track active streams also for DP SST"
drm/i915: fix WaInsertDummyPushConstPs
drm/i915: Assert that the request hasn't been retired
drm/i915: Repack fence tiling mode and stride into a single integer
drm/i915: Document and reject invalid tiling modes
drm/i915: Remove locking for get_tiling
drm/i915: Remove pinned check from madvise ioctl
drm/i915: Reduce locking inside swfinish ioctl
drm/i915: Remove (struct_mutex) locking for busy-ioctl
drm/i915: Remove (struct_mutex) locking for wait-ioctl
drm/i915: Do a nonblocking wait first in pread/pwrite
drm/i915: Remove unused no-shrinker-steal
drm/i915: Tidy generation of the GTT mmap offset
drm/i915/shrinker: Wait before acquiring struct_mutex under oom
drm/i915: Simplify do_idling() (Ironlake vt-d w/a)
...
- more fence destaging and cleanup (Gustavo&Sumit)
- DRIVER_LEGACY to untangle from DRIVER_MODESET
- drm_mm refactor (Chris)
- fbdev-less compile fies
- clipped plane src/dst rects (Ville)
- + a few mediatek patches that build on top of that (Bibby+Daniel)
- small stuff all over really
* tag 'topic/drm-misc-2016-08-12' of git://anongit.freedesktop.org/drm-intel: (43 commits)
dma-buf/fence: kerneldoc: remove spurious section header
dma-buf/fence: kerneldoc: remove unused struct members
Revert "gpu: drm: omapdrm: dss-of: add missing of_node_put after calling of_parse_phandle"
drm: Protect fb_defio in drivers with CONFIG_KMS_FBDEV_EMULATION
drm/radeon|amgpu: Make fbdev emulation optional
drm/vmwgfx: select CONFIG_FB
drm: Remove superflous linux/fb.h includes
drm/fb-helper: Add a dummy remove_conflicting_framebuffers
dma-buf/sync_file: only enable fence signalling on poll()
Documentation: add doc for sync_file_get_fence()
dma-buf/sync_file: add sync_file_get_fence()
dma-buf/sync_file: refactor fence storage in struct sync_file
dma-buf/fence-array: add fence_is_array()
drm/dp_helper: Rate limit timeout errors from drm_dp_i2c_do_msg()
drm/dp_helper: Print first error received on failure in drm_dp_dpcd_access()
drm: Add ratelimited versions of the DRM_DEBUG* macros
drm: Make sure drm_vblank_no_hw_counter isn't abused
drm/mediatek: Fix mtk_atomic_complete for runtime_pm
drm/mediatek: plane: Use FB's format's cpp to compute x offset
drm/mediatek: plane: Merge mtk_plane_enable into mtk_plane_atomic_update
...
With NV12 we have two color planes to deal with so we must compute the
surface and x/y offsets for the second plane as well.
What makes this a bit nasty is that the hardware expects the surface
offset to be specified as a distance from the main surface offset.
What's worse, the distance must be non-negative (no neat wraparound or
anything). So we must make sure that the main surface offset is always
less or equal to the AUX surface offset. We do that by computing the AUX
offset first and the main surface offset second. If the main surface
offset ends up being above the AUX offset, we just push it down as far
as is required while still maintaining the required alignment etc.
Fortunately the AUX offset only reuqires 4K alignment, so we don't need
to do any of the backwards searching for an acceptable offset that we
must do for the main surface. And X tiled + NV12 isn't a supported
combination anyway.
Note that this just computes aux surface offsets, we do not yet program
them into the actual hardware registers, and hence we can't yet expose
NV12.
v2: Rebase due to drm_plane_state src/dst rects
s/TODO.../something else/ in the commit message/ (Daniel)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470821001-25272-12-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
SKL has nasty limitations with the display surface offsets:
* source x offset + width must be less than the stride for X tiled
surfaces or the display engine falls over
* the surface offset requires lots of alignment (256K or 1M)
These facts mean that we can't just pick any suitably aligned tile
boundary as the offset and expect the resulting x offset to be useable.
The solution is to start with the closest boundary as before, but then
keep searching backwards until we find one that works, or don't. This
means we must be prepared to fail, hence the whole surface offset
calculation needs to be moved to the .check_plane() hook from the
.update_plane() hook.
While at it we can check that the source width/height don't exceed
maximum plane size limits.
We'll store the results of the computation in the plane state to make
it easy for the .update_plane() hook to do its thing.
v2: Replace for+break loop with while loop
Rebase due to drm_plane_state src/dst rects
Rebase due to plane_check_state()
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Sivakumar Thulasimani <sivakumar.thulasimani@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470821001-25272-11-git-send-email-ville.syrjala@linux.intel.com
To make life less surprising we can make intel_adjust_tile_offset()
deal with linear buffers as well. Currently it doesn't seem like there's
a real need for this since only X tiling and NV12 (which would always
be tiled currently) should need it. But I've used it for some debug
hacks already so seems like a reasonable thing to have.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Sivakumar Thulasimani <sivakumar.thulasimani@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470821001-25272-10-git-send-email-ville.syrjala@linux.intel.com
Minimize the resulting X coordinate after intel_adjust_tile_offset() is
done with it's offset adjustment. This allows calling
intel_adjust_tile_offset() multiple times in case we need to adjust
the offset several times.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470821001-25272-9-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
If there's a fence on the object it will be aligned to the start
of the object, and hence CPU rendering to any fb that straddles
the fence edge will come out wrong due to lines wrapping at the
wrong place.
We have no API to manage fences on a sub-object level, so we can't
really fix this in any way. Additonally gen2/3 fences are rather
coarse grained so adjusting the offset migth not even be possible.
Avoid these problems by requiring the fb layout to agree with the
fence layout (if present).
v2: Rebase due to i915_gem_object_get_tiling() & co.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Sivakumar Thulasimani <sivakumar.thulasimani@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470821001-25272-8-git-send-email-ville.syrjala@linux.intel.com
Currently we require the object to be X tiled if the fb is X
tiled. The argument is supposedly FBC GTT tracking. But
actually that no longer holds water since FBC supports
Y tiling as well on SKL+.
A better rule IMO is to require that if there is a fence, the
fb modifier match the object tiling mode. But if the object is linear,
we can allow the fb modifier to be anything. The idea being that
if the user set the tiling mode on the object, presumably the intention
is to actually use the fence for CPU access. But if the tiling mode is
not set, the user has no intention of using a fence (and can't actually
since we disallow tiling mode changes when there are framebuffers
associated with the object).
On gen2/3 we must keep to the rule that the object and fb
must be either both linear or both X tiled. No mixing allowed
since the display engine itself will use the fence if it's present.
v2: Fix typos
v3: Rebase due to i915_gem_object_get_tiling() & co.
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470821001-25272-7-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Soon the fence tiling mode may not always match the fb modifier
even for X tiled buffers. So let's use the fb modifier
consistently for all display tiling decisions.
v2: Rebased due to s/ring/engine/
v3: Rebased due to s/engine/ring/ O_o
v4: Rebase due to i915_gem_object_get_tiling() & co.
Reviewed-by: Matthew Auld <matthew.auld@intel.com> (v1)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470821001-25272-6-git-send-email-ville.syrjala@linux.intel.com
intel_compute_tile_offset() and intel_add_fb_offsets() get passed the fb
and the rotation. As both of those come from the plane state we can just
pass that in instead.
For extra consitency pass the plane state to intel_fb_xy_to_linear() as
well even though it only really needs the fb.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Sivakumar Thulasimani <sivakumar.thulasimani@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470821001-25272-5-git-send-email-ville.syrjala@linux.intel.com
