There is no other consumer for btrfs_handle_error() other than
__btrfs_handle_fs_error(), further this function quite small.
Merge it into its parent.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
[ reformat comment ]
Signed-off-by: David Sterba <dsterba@suse.com>
__btrfs_handle_fs_error() sets BTRFS_FS_STATE_ERROR, and calls
btrfs_handle_error() so no need to check if the BTRFS_FS_STATE_ERROR
is set in btrfs_handle_error(). And there is no other user of
btrfs_handle_error() as well.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There is a scenario that can end up with rebuild process failing to
return good content, i.e.
suppose that all disks can be read without problems and if the content
that was read out doesn't match its checksum, currently for raid6
btrfs at most retries twice,
- the 1st retry is to rebuild with all other stripes, it'll eventually
be a raid5 xor rebuild,
- if the 1st fails, the 2nd retry will deliberately fail parity p so
that it will do raid6 style rebuild,
however, the chances are that another non-parity stripe content also
has something corrupted, so that the above retries are not able to
return correct content, and users will think of this as data loss.
More seriouly, if the loss happens on some important internal btree
roots, it could refuse to mount.
This extends btrfs to do more retries and each retry fails only one
stripe. Since raid6 can tolerate 2 disk failures, if there is one
more failure besides the failure on which we're recovering, this can
always work.
The worst case is to retry as many times as the number of raid6 disks,
but given the fact that such a scenario is really rare in practice,
it's still acceptable.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The raid6 corruption is that,
suppose that all disks can be read without problems and if the content
that was read out doesn't match its checksum, currently for raid6
btrfs at most retries twice,
- the 1st retry is to rebuild with all other stripes, it'll eventually
be a raid5 xor rebuild,
- if the 1st fails, the 2nd retry will deliberately fail parity p so
that it will do raid6 style rebuild,
however, the chances are that another non-parity stripe content also
has something corrupted, so that the above retries are not able to
return correct content.
We've fixed normal reads to rebuild raid6 correctly with more retries
in Patch "Btrfs: make raid6 rebuild retry more"[1], this is to fix
scrub to do the exactly same rebuild process.
[1]: https://patchwork.kernel.org/patch/10091755/
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Update btrfs_check_rw_degradable() to check against the given device if
its lost.
We can use this function to know if the volume is going to be in
degraded mode OR failed state, when the given device fails. Which is
needed when we are handling the device failed state.
A preparatory patch does not affect the flow as such.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
[ enhance comment ]
Signed-off-by: David Sterba <dsterba@suse.com>
All callers pass either GFP_NOFS or GFP_KERNEL now, so we can sink the
parameter to the function, though we lose some of the slightly better
semantics of GFP_KERNEL in some places, it's worth cleaning up the
callchains.
Signed-off-by: David Sterba <dsterba@suse.com>
There's only one instance where we pass different gfp mask to
unlock_extent_cached. Add a separate helper for that and then we can
drop the gfp parameter from unlock_extent_cached.
Signed-off-by: David Sterba <dsterba@suse.com>
Recent patches reworking the mount path left some unused parameters. We
pass a vfsmount to mount_subvol, the flags and data (ie. mount options)
have been already applied and we will not need them.
Signed-off-by: David Sterba <dsterba@suse.com>
Long ago, commit edf24abe51 ("btrfs: sanity mount option parsing and
early mount code") split the btrfs_parse_options() into two parts
(btrfs_parse_early_options() and btrfs_parse_options()). As a result,
btrfs_parse_optins no longer gets called twice and is the last one to
parse mount option string. Therefore there is no need to dup it.
Signed-off-by: Tomohiro Misono <misono.tomohiro@jp.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In fact nobody is waiting on @wait's waitqueue, it can be safely
removed.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The bio is not referenced after it has been submitted and the endio is
going to consume the sole reference on successful submission. On error,
the callers of __btrfs_submit_dio_bio do invoke bio_put so we don't
leak it either.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The bio is never referenced after it has been submitted so there is no
point in getting an extra reference.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The bio that is passsed is the newly created repair bio which already
has a reference count of 1, which is going to be consumed by the
endio routine on successful submission. On error the handler also
calls bio_put.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
bio_get/set is necessary only if the bio is going to be referenced
following submissions. In the code paths where such calls are made
we don't really need them since the bio is referenced only if
btrfs_map_bio returns an error. And this function can return an error
prior to submission only. So referencing the bio is safe. Furthermore
we do call bio_endio which will consume the last reference. So let's
remove the redundant calls.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
As it's a single instance and local to the file, we don't need to pass
it as an argument.
Reviewed-by: Timofey Titovets <nefelim4ag@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The callback is trivial and we don't need the abstraction for our
purposes. Let's open code it.
Reviewed-by: Timofey Titovets <nefelim4ag@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The callback is trivial and we don't need the abstraction for our
purposes. Let's open code it and also make the array types explicit.
Reviewed-by: Timofey Titovets <nefelim4ag@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Remove unused arg 'holder' from parse_subvol_options(), which has been
forgotten to be cleaned in the commit b99beb110e2d ("btrfs: split
parse_early_options() in two").
Signed-off-by: Tomohiro Misono <misono.tomohiro@jp.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since setup_root_args() is not used anymore, just remove it.
Signed-off-by: Tomohiro Misono <misono.tomohiro@jp.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now parse_early_options() is used by both btrfs_mount() and
btrfs_mount_root(). However, the former only needs subvol related part
and the latter needs the others.
Therefore extract the subvol related parts from parse_early_options() and
move it to new parse function (parse_subvol_options()).
Signed-off-by: Tomohiro Misono <misono.tomohiro@jp.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Cleanup btrfs_mount() by using btrfs_mount_root(). This avoids getting
btrfs_mount() called twice in mount path.
Old btrfs_mount() will do:
0. VFS layer calls vfs_kern_mount() with registered file_system_type
(for btrfs, btrfs_fs_type). btrfs_mount() is called on the way.
1. btrfs_parse_early_options() parses "subvolid=" mount option and set the
value to subvol_objectid. Otherwise, subvol_objectid has the initial
value of 0
2. check subvol_objectid is 5 or not. Assume this time id is not 5, then
btrfs_mount() returns by calling mount_subvol()
3. In mount_subvol(), original mount options are modified to contain
"subvolid=0" in setup_root_args(). Then, vfs_kern_mount() is called with
btrfs_fs_type and new options
4. btrfs_mount() is called again
5. btrfs_parse_early_options() parses "subvolid=0" and set 5 (instead of 0)
to subvol_objectid
6. check subvol_objectid is 5 or not. This time id is 5 and mount_subvol()
is not called. btrfs_mount() finishes mounting a root
7. (in mount_subvol()) with using a return vale of vfs_kern_mount(), it
calls mount_subtree()
8. return subvolume's dentry
Reusing the same file_system_type (and btrfs_mount()) for vfs_kern_mount()
is the cause of complication.
Instead, new btrfs_mount() will do:
1. parse subvol id related options for later use in mount_subvol()
2. mount device's root by calling vfs_kern_mount() with
btrfs_root_fs_type, which is not registered to VFS by
register_filesystem(). As a result, btrfs_mount_root() is called
3. return by calling mount_subvol()
The code of 2. is moved from the first part of mount_subvol().
The semantics of device holder changes from btrfs_fs_type to
btrfs_root_fs_type and has to be used in all contexts. Otherwise we'd
get wrong results when mount and dev scan would not check the same
thing. (this has been found indendently and the fix is folded into this
patch)
Signed-off-by: Tomohiro Misono <misono.tomohiro@jp.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ fold the btrfs_control_ioctl fixup, extend the comment ]
Signed-off-by: David Sterba <dsterba@suse.com>
Add btrfs_mount_root() and new file_system_type for preparation of cleanup
of btrfs_mount(). Code path is not changed yet.
btrfs_mount_root() is almost the same as current btrfs_mount(), but doesn't
have subvolume related part.
Signed-off-by: Tomohiro Misono <misono.tomohiro@jp.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Functions called from extent_write_cache_pages used void* as generic
callback data, but all of them convert it to extent_page_data, or use it
directly.
Signed-off-by: David Sterba <dsterba@suse.com>
The function extent_write_cache_pages is modelled after
write_cache_pages which is a generic interface and the writepage
parameter makes sense there. In btrfs we know exactly which callback
we're going to use, so we can pass it directly.
Signed-off-by: David Sterba <dsterba@suse.com>
flush_epd_write_bio is same as flush_write_bio, no point having two such
functions. Merge them to flush_write_bio. The 'noinline' attribute is
removed as it does not have any meaning.
Signed-off-by: David Sterba <dsterba@suse.com>
Currently there are 2 function doing binary search on btrfs nodes:
bin_search and btrfs_bin_search. The latter being a simple wrapper for
the former. So eliminate the wrapper and just rename bin_search to
btrfs_bin_search. No functional changes
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The tree argument passed to extent_write_full_page is referenced from
the page being passed to the same function. Since we already have
enough information to get the reference, remove the function parameter.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This function is called only from submit_compressed_extents and the
io tree being passed is always that of the inode. But we are also
passing the inode, so just move getting the io tree pointer in
extent_write_locked_range to simplify the signature.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This code was added in 492bb6deee ("Btrfs: Hold a reference on bios
during submit_bio, add some extra bio checks"). However, holding a
reference on a bio is necessary only if it's going to be referenced
after the submit_bio returns and the bio is completed. In this
particular instance this is not the case so there is no need to hold
an extra reference since we directly return.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When modifying a tree where the root is at BTRFS_MAX_LEVEL - 1 then
the level variable is going to be 7 (this is the max height of the
tree). On the other hand btrfs_cow_block is always called with
"level + 1" as an index into the nodes and slots arrays. This leads to
an out of bounds access. Admittdely this will be benign since an OOB
access of the nodes array will likely read the 0th element from the
slots array, which in this case is going to be 0 (since we start CoW at
the top of the tree). The OOB access into the slots array in turn will
read the 0th and 1st values of the locks array, which would both be 0
at the time. However, this benign behavior relies on the fact that the
path being passed hasn't been initialised, if it has already been used to
query a btree then it could potentially have populated the nodes/slots arrays.
Fix it by explicitly checking if we are at level 7 (the maximum allowed
index in nodes/slots arrays) and explicitly call the CoW routine with
NULL for parent's node/slot.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Fixes-coverity-id: 711515
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
These duplicate includes have been found with scripts/checkincludes.pl but
they have been removed manually to avoid removing false positives.
Signed-off-by: Pravin Shedge <pravin.shedge4linux@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This function was introduced by 247e743cbe ("Btrfs: Use async helpers
to deal with pages that have been improperly dirtied") and it didn't do
any error handling then. This function might very well fail in ENOMEM
situation, yet it's not handled, this could lead to inconsistent state.
So let's handle the failure by setting the mapping error bit.
Cc: stable@vger.kernel.org
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There are several places opencoding this conversion, add a helper now
that we have 3 compression algorithms.
Signed-off-by: David Sterba <dsterba@suse.com>
Before returning hole_em in btrfs_get_fiemap_extent we check if it's different
than null. However, by the time this null check is triggered we already know
hole_em is not null because it means it points to the em we found and it
has already been dereferenced.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
trans was statically assigned to NULL and this never changed over the
course of btrfs_get_extent. So remove any code which checks whether
trans != NULL and just hardcode the fact trans is always NULL.
Resolves-coverity-id: 112806
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The return value of sizeof() is of type size_t, so we must print it
using the %z format modifier rather than %l to avoid this warning
on some architectures:
fs/btrfs/tree-checker.c: In function 'check_dir_item':
fs/btrfs/tree-checker.c:273:50: error: format '%lu' expects argument of type 'long unsigned int', but argument 5 has type 'u32' {aka 'unsigned int'} [-Werror=format=]
Fixes: 005887f2e3e0 ("btrfs: tree-checker: Add checker for dir item")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This changes to use struct completion directly and removes 'struct
scrub_bio_ret' along with the code using it.
This struct is used to get the return value from bio, but the caller can
access bio to get the return value directly and is holding a reference
on it so it won't go away underneath us and can be removed safely.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The defined wait is not used anywhere.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We need to call extent_range_clear_dirty_for_io()
on compression range to prevent application from changing
page content, while pages compressing.
extent_range_clear_dirty_for_io() runs on each loop iteration,
"(end - start)" can be much (up to 1024 times) bigger
then compression range (BTRFS_MAX_UNCOMPRESSED).
The start pointer is advanced each time we manage to compress part of
the range. The end pointer does not change so we could redirty the
remaining parts repeatedly.
Fix that behaviour by call extent_range_clear_dirty_for_io()
only once, the first time it happens.
This is the safest but probably not the best behaviour. Previous
iterations of the patch tried to redirty only the range that we were not
able to compress. This has been refused by David for safety reasons, the
writeout callchain is complex and there could be some path that relies
on redirtying the entire unwritten range.
Signed-off-by: Timofey Titovets <nefelim4ag@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ enhance changelog, the history and safety concerns, add comment ]
Signed-off-by: David Sterba <dsterba@suse.com>
Slowest part of heuristic for now is kernel heap sort()
It's can take up to 55% of runtime on sorting bucket items.
As sorting will always call on most data sets to get correctly
byte_core_set_size, the only way to speed up heuristic, is to
speed up sort on bucket.
Add a general radix_sort function.
Radix sort require 2 buffers, one full size of input array
and one for store counters (jump addresses).
That increase usage per heuristic workspace +1KiB
8KiB + 1KiB -> 8KiB + 2KiB
That is LSD Radix, i use 4 bit as a base for calculating,
to make counters array acceptable small (16 elements * 8 byte).
That Radix sort implementation have several points to adjust,
I added him to make radix sort general usable in kernel,
like heap sort, if needed.
Performance tested in userspace copy of heuristic code,
throughput:
- average <-> random data: ~3500 MiB/s - heap sort
- average <-> random data: ~6000 MiB/s - radix sort
Signed-off-by: Timofey Titovets <nefelim4ag@gmail.com>
[ coding style fixes ]
Signed-off-by: David Sterba <dsterba@suse.com>
Currently device state is being managed by each individual int
variable such as struct btrfs_device::is_tgtdev_for_dev_replace.
Instead of that declare btrfs_device::dev_state
BTRFS_DEV_STATE_FLUSH_SENT and use the bit operations.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently device state is being managed by each individual int
variable such as struct btrfs_device::is_tgtdev_for_dev_replace.
Instead of that declare btrfs_device::dev_state
BTRFS_DEV_STATE_MISSING and use the bit operations.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
[ whitespace adjustments ]
Signed-off-by: David Sterba <dsterba@suse.com>
Currently device state is being managed by each individual int
variable such as struct btrfs_device::missing. Instead of that
declare btrfs_device::dev_state BTRFS_DEV_STATE_MISSING and use
the bit operations.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by : Nikolay Borisov <nborisov@suse.com>
[ whitespace adjustments ]
Signed-off-by: David Sterba <dsterba@suse.com>
Currently device state is being managed by each individual int
variable such as struct btrfs_device::in_fs_metadata. Instead of
that declare device state BTRFS_DEV_STATE_IN_FS_METADATA and use
the bit operations.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
[ whitespace adjustments ]
Signed-off-by: David Sterba <dsterba@suse.com>
Currently device state is being managed by each individual int
variable such as struct btrfs_device::writeable. Instead of that
declare device state BTRFS_DEV_STATE_WRITEABLE and use the
bit operations.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
[ whitespace adjustments ]
Signed-off-by: David Sterba <dsterba@suse.com>
