And remove unneeded include directives from perf-sys.h to prune the
header dependency tree.
Fixup the fallout in places where definitions were being used without
the needed include directives that were being satisfied because they
were in perf-sys.h.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-7b1zvugiwak4ibfa3j6ott7f@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
And into a separate util/record.h, to better isolate things and make
sure that those who use record_opts and the other moved declarations
are explicitly including the necessary header.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-31q8mei1qkh74qvkl9nwidfq@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It is sometimes useful to generate a snapshot when perf record exits;
I've been using a wrapper script around the workload that would do a
killall -USR2 perf when the workload exits.
This patch makes it easier and also works when perf record is attached
to a pre-existing task. A new snapshot option 'e' can be specified in
-S to enable this behavior:
root@elsewhere:~# perf record -e intel_pt// -Se sleep 1
[ perf record: Woken up 2 times to write data ]
[ perf record: Captured and wrote 0.085 MB perf.data ]
Co-developed-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190806144101.62892-1-alexander.shishkin@linux.intel.com
[ Fixed up !HAVE_AUXTRACE_SUPPORT build in builtin-record.c, adding 2 missing __maybe_unused ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Attempting to profile 1024 or more CPUs with perf causes two errors:
perf record -a
[ perf record: Woken up X times to write data ]
way too many cpu caches..
[ perf record: Captured and wrote X MB perf.data (X samples) ]
perf report -C 1024
Error: failed to set cpu bitmap
Requested CPU 1024 too large. Consider raising MAX_NR_CPUS
Increasing MAX_NR_CPUS from 1024 to 2048 and redefining MAX_CACHES as
MAX_NR_CPUS * 4 returns normal functionality to perf:
perf record -a
[ perf record: Woken up X times to write data ]
[ perf record: Captured and wrote X MB perf.data (X samples) ]
perf report -C 1024
...
Signed-off-by: Kyle Meyer <kyle.meyer@hpe.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190620193630.154025-1-meyerk@stormcage.eag.rdlabs.hpecorp.net
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
One can just record callchains in the kernel or user space with this new
options.
We can use it together with "--all-kernel" options.
This two options is used just like print_stack(sys) or print_ustack(usr)
for systemtap.
Shown below is the usage of this new option combined with "--all-kernel"
options:
1. Configure all used events to run in kernel space and just collect
kernel callchains.
$ perf record -a -g --all-kernel --kernel-callchains
2. Configure all used events to run in kernel space and just collect
user callchains.
$ perf record -a -g --all-kernel --user-callchains
Committer notes:
Improved documentation to state that asking for kernel callchains really
is asking for excluding user callchains, and vice versa.
Further mentioned that using both won't get both, but nothing, as both
will be excluded.
Signed-off-by: yuzhoujian <yuzhoujian@didichuxing.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1559222962-22891-1-git-send-email-ufo19890607@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Implemented PERF_RECORD_COMPRESSED event, related data types, header
feature and functions to write, read and print feature attributes from
the trace header section.
comp_mmap_len preserves the size of mmaped kernel buffer that was used
during collection. comp_mmap_len size is used on loading stage as the
size of decomp buffer for decompression of COMPRESSED events content.
Committer notes:
Fixed up conflict with BPF_PROG_INFO and BTF_BTF header features.
Signed-off-by: Alexey Budankov <alexey.budankov@linux.intel.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/ebbaf031-8dda-3864-ebc6-7922d43ee515@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Implement a --mmap-flush option that specifies minimal number of bytes
that is extracted from mmaped kernel buffer to store into a trace. The
default option value is 1 byte what means every time trace writing
thread finds some new data in the mmaped buffer the data is extracted,
possibly compressed and written to a trace.
$ tools/perf/perf record --mmap-flush 1024 -e cycles -- matrix.gcc
$ tools/perf/perf record --aio --mmap-flush 1K -e cycles -- matrix.gcc
The option is independent from -z setting, doesn't vary with compression
level and can serve two purposes.
The first purpose is to increase the compression ratio of a trace data.
Larger data chunks are compressed more effectively so the implemented
option allows specifying data chunk size to compress. Also at some cases
executing more write syscalls with smaller data size can take longer
than executing less write syscalls with bigger data size due to syscall
overhead so extracting bigger data chunks specified by the option value
could additionally decrease runtime overhead.
The second purpose is to avoid self monitoring live-lock issue in system
wide (-a) profiling mode. Profiling in system wide mode with compression
(-a -z) can additionally induce data into the kernel buffers along with
the data from monitored processes. If performance data rate and volume
from the monitored processes is high then trace streaming and
compression activity in the tool is also high. High tool process
activity can lead to subtle live-lock effect when compression of single
new byte from some of mmaped kernel buffer leads to generation of the
next single byte at some mmaped buffer. So perf tool process ends up in
endless self monitoring.
Implemented synch parameter is the mean to force data move independently
from the specified flush threshold value. Despite the provided flush
value the tool needs capability to unconditionally drain memory buffers,
at least in the end of the collection.
Committer testing:
Running with the default value, i.e. as soon as there is something to
read go on consuming, we first write the synthesized events, small
chunks of about 128 bytes:
# perf trace -m 2048 --call-graph dwarf -e write -- perf record
<SNIP>
101.142 ( 0.004 ms): perf/25821 write(fd: 3</root/perf.data>, buf: 0x210db60, count: 120) = 120
__libc_write (/usr/lib64/libpthread-2.28.so)
ion (/home/acme/bin/perf)
record__write (inlined)
process_synthesized_event (/home/acme/bin/perf)
perf_tool__process_synth_event (inlined)
perf_event__synthesize_mmap_events (/home/acme/bin/perf)
Then we move to reading the mmap buffers consuming the events put there
by the kernel perf infrastructure:
107.561 ( 0.005 ms): perf/25821 write(fd: 3</root/perf.data>, buf: 0x7f1befc02000, count: 336) = 336
__libc_write (/usr/lib64/libpthread-2.28.so)
ion (/home/acme/bin/perf)
record__write (inlined)
record__pushfn (/home/acme/bin/perf)
perf_mmap__push (/home/acme/bin/perf)
record__mmap_read_evlist (inlined)
record__mmap_read_all (inlined)
__cmd_record (inlined)
cmd_record (/home/acme/bin/perf)
12919.953 ( 0.136 ms): perf/25821 write(fd: 3</root/perf.data>, buf: 0x7f1befc83150, count: 184984) = 184984
<SNIP same backtrace as in the 107.561 timestamp>
12920.094 ( 0.155 ms): perf/25821 write(fd: 3</root/perf.data>, buf: 0x7f1befc02150, count: 261816) = 261816
<SNIP same backtrace as in the 107.561 timestamp>
12920.253 ( 0.093 ms): perf/25821 write(fd: 3</root/perf.data>, buf: 0x7f1befb81120, count: 170832) = 170832
<SNIP same backtrace as in the 107.561 timestamp>
If we limit it to write only when more than 16MB are available for
reading, it throttles that to a quarter of the --mmap-pages set for
'perf record', which by default get to 528384 bytes, found out using
'record -v':
mmap flush: 132096
mmap size 528384B
With that in place all the writes coming from
record__mmap_read_evlist(), i.e. from the mmap buffers setup by the
kernel perf infrastructure were at least 132096 bytes long.
Trying with a bigger mmap size:
perf trace -e write perf record -v -m 2048 --mmap-flush 16M
74982.928 ( 2.471 ms): perf/26500 write(fd: 3</root/perf.data>, buf: 0x7ff94a6cc000, count: 3580888) = 3580888
74985.406 ( 2.353 ms): perf/26500 write(fd: 3</root/perf.data>, buf: 0x7ff949ecb000, count: 3453256) = 3453256
74987.764 ( 2.629 ms): perf/26500 write(fd: 3</root/perf.data>, buf: 0x7ff9496ca000, count: 3859232) = 3859232
74990.399 ( 2.341 ms): perf/26500 write(fd: 3</root/perf.data>, buf: 0x7ff948ec9000, count: 3769032) = 3769032
74992.744 ( 2.064 ms): perf/26500 write(fd: 3</root/perf.data>, buf: 0x7ff9486c8000, count: 3310520) = 3310520
74994.814 ( 2.619 ms): perf/26500 write(fd: 3</root/perf.data>, buf: 0x7ff947ec7000, count: 4194688) = 4194688
74997.439 ( 2.787 ms): perf/26500 write(fd: 3</root/perf.data>, buf: 0x7ff9476c6000, count: 4029760) = 4029760
Was again limited to a quarter of the mmap size:
mmap flush: 2098176
mmap size 8392704B
A warning about that would be good to have but can be added later,
something like:
"max flush is a quarter of the mmap size, if wanting to bump the mmap
flush further, bump the mmap size as well using -m/--mmap-pages"
Also rename the 'sync' parameters to 'synch' to keep tools/perf building
with older glibcs:
cc1: warnings being treated as errors
builtin-record.c: In function 'record__mmap_read_evlist':
builtin-record.c:775: warning: declaration of 'sync' shadows a global declaration
/usr/include/unistd.h:933: warning: shadowed declaration is here
builtin-record.c: In function 'record__mmap_read_all':
builtin-record.c:856: warning: declaration of 'sync' shadows a global declaration
/usr/include/unistd.h:933: warning: shadowed declaration is here
Signed-off-by: Alexey Budankov <alexey.budankov@linux.intel.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/f6600d72-ecfa-2eb7-7e51-f6954547d500@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently, monitoring of BPF programs through bpf_event is off by
default for 'perf record'.
To turn it on, the user need to use option "--bpf-event". As BPF gets
wider adoption in different subsystems, this option becomes
inconvenient.
This patch makes bpf_event on by default, and adds option "--no-bpf-event"
to turn it off. Since option --bpf-event is not released yet, it is safe
to remove it.
Signed-off-by: Song Liu <songliubraving@fb.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: kernel-team@fb.com
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stanislav Fomichev <sdf@google.com>
Link: http://lkml.kernel.org/r/20190312053051.2690567-2-songliubraving@fb.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Allocate affinity option and masks for mmap data buffers and record
thread as well as initialize allocated objects.
Signed-off-by: Alexey Budankov <alexey.budankov@linux.intel.com>
Reviewed-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/526fa2b0-07de-6dbd-a7e9-26ba875593c9@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch adds basic handling of PERF_RECORD_BPF_EVENT. Tracking of
PERF_RECORD_BPF_EVENT is OFF by default. Option --bpf-event is added to
turn it on.
Committer notes:
Add dummy machine__process_bpf_event() variant that returns zero for
systems without HAVE_LIBBPF_SUPPORT, such as Alpine Linux, unbreaking
the build in such systems.
Remove the needless include <machine.h> from bpf->event.h, provide just
forward declarations for the structs and unions in the parameters, to
reduce compilation time and needless rebuilds when machine.h gets
changed.
Committer testing:
When running with:
# perf record --bpf-event
On an older kernel where PERF_RECORD_BPF_EVENT and PERF_RECORD_KSYMBOL
is not present, we fallback to removing those two bits from
perf_event_attr, making the tool to continue to work on older kernels:
perf_event_attr:
size 112
{ sample_period, sample_freq } 4000
sample_type IP|TID|TIME|PERIOD
read_format ID
disabled 1
inherit 1
mmap 1
comm 1
freq 1
enable_on_exec 1
task 1
precise_ip 3
sample_id_all 1
exclude_guest 1
mmap2 1
comm_exec 1
ksymbol 1
bpf_event 1
------------------------------------------------------------
sys_perf_event_open: pid 5779 cpu 0 group_fd -1 flags 0x8
sys_perf_event_open failed, error -22
switching off bpf_event
------------------------------------------------------------
perf_event_attr:
size 112
{ sample_period, sample_freq } 4000
sample_type IP|TID|TIME|PERIOD
read_format ID
disabled 1
inherit 1
mmap 1
comm 1
freq 1
enable_on_exec 1
task 1
precise_ip 3
sample_id_all 1
exclude_guest 1
mmap2 1
comm_exec 1
ksymbol 1
------------------------------------------------------------
sys_perf_event_open: pid 5779 cpu 0 group_fd -1 flags 0x8
sys_perf_event_open failed, error -22
switching off ksymbol
------------------------------------------------------------
perf_event_attr:
size 112
{ sample_period, sample_freq } 4000
sample_type IP|TID|TIME|PERIOD
read_format ID
disabled 1
inherit 1
mmap 1
comm 1
freq 1
enable_on_exec 1
task 1
precise_ip 3
sample_id_all 1
exclude_guest 1
mmap2 1
comm_exec 1
------------------------------------------------------------
And then proceeds to work without those two features.
As passing --bpf-event is an explicit action performed by the user, perhaps we
should emit a warning telling that the kernel has no such feature, but this can
be done on top of this patch.
Now with a kernel that supports these events, start the 'record --bpf-event -a'
and then run 'perf trace sleep 10000' that will use the BPF
augmented_raw_syscalls.o prebuilt (for another kernel version even) and thus
should generate PERF_RECORD_BPF_EVENT events:
[root@quaco ~]# perf record -e dummy -a --bpf-event
^C[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.713 MB perf.data ]
[root@quaco ~]# bpftool prog
13: cgroup_skb tag 7be49e3934a125ba gpl
loaded_at 2019-01-19T09:09:43-0300 uid 0
xlated 296B jited 229B memlock 4096B map_ids 13,14
14: cgroup_skb tag 2a142ef67aaad174 gpl
loaded_at 2019-01-19T09:09:43-0300 uid 0
xlated 296B jited 229B memlock 4096B map_ids 13,14
15: cgroup_skb tag 7be49e3934a125ba gpl
loaded_at 2019-01-19T09:09:43-0300 uid 0
xlated 296B jited 229B memlock 4096B map_ids 15,16
16: cgroup_skb tag 2a142ef67aaad174 gpl
loaded_at 2019-01-19T09:09:43-0300 uid 0
xlated 296B jited 229B memlock 4096B map_ids 15,16
17: cgroup_skb tag 7be49e3934a125ba gpl
loaded_at 2019-01-19T09:09:44-0300 uid 0
xlated 296B jited 229B memlock 4096B map_ids 17,18
18: cgroup_skb tag 2a142ef67aaad174 gpl
loaded_at 2019-01-19T09:09:44-0300 uid 0
xlated 296B jited 229B memlock 4096B map_ids 17,18
21: cgroup_skb tag 7be49e3934a125ba gpl
loaded_at 2019-01-19T09:09:45-0300 uid 0
xlated 296B jited 229B memlock 4096B map_ids 21,22
22: cgroup_skb tag 2a142ef67aaad174 gpl
loaded_at 2019-01-19T09:09:45-0300 uid 0
xlated 296B jited 229B memlock 4096B map_ids 21,22
31: tracepoint name sys_enter tag 12504ba9402f952f gpl
loaded_at 2019-01-19T09:19:56-0300 uid 0
xlated 512B jited 374B memlock 4096B map_ids 30,29,28
32: tracepoint name sys_exit tag c1bd85c092d6e4aa gpl
loaded_at 2019-01-19T09:19:56-0300 uid 0
xlated 256B jited 191B memlock 4096B map_ids 30,29
# perf report -D | grep PERF_RECORD_BPF_EVENT | nl
1 0 55834574849 0x4fc8 [0x18]: PERF_RECORD_BPF_EVENT bpf event with type 1, flags 0, id 13
2 0 60129542145 0x5118 [0x18]: PERF_RECORD_BPF_EVENT bpf event with type 1, flags 0, id 14
3 0 64424509441 0x5268 [0x18]: PERF_RECORD_BPF_EVENT bpf event with type 1, flags 0, id 15
4 0 68719476737 0x53b8 [0x18]: PERF_RECORD_BPF_EVENT bpf event with type 1, flags 0, id 16
5 0 73014444033 0x5508 [0x18]: PERF_RECORD_BPF_EVENT bpf event with type 1, flags 0, id 17
6 0 77309411329 0x5658 [0x18]: PERF_RECORD_BPF_EVENT bpf event with type 1, flags 0, id 18
7 0 90194313217 0x57a8 [0x18]: PERF_RECORD_BPF_EVENT bpf event with type 1, flags 0, id 21
8 0 94489280513 0x58f8 [0x18]: PERF_RECORD_BPF_EVENT bpf event with type 1, flags 0, id 22
9 7 620922484360 0xb6390 [0x30]: PERF_RECORD_BPF_EVENT bpf event with type 1, flags 0, id 29
10 7 620922486018 0xb6410 [0x30]: PERF_RECORD_BPF_EVENT bpf event with type 2, flags 0, id 29
11 7 620922579199 0xb6490 [0x30]: PERF_RECORD_BPF_EVENT bpf event with type 1, flags 0, id 30
12 7 620922580240 0xb6510 [0x30]: PERF_RECORD_BPF_EVENT bpf event with type 2, flags 0, id 30
13 7 620922765207 0xb6598 [0x30]: PERF_RECORD_BPF_EVENT bpf event with type 1, flags 0, id 31
14 7 620922874543 0xb6620 [0x30]: PERF_RECORD_BPF_EVENT bpf event with type 1, flags 0, id 32
#
There, the 31 and 32 tracepoint BPF programs put in place by 'perf trace'.
Signed-off-by: Song Liu <songliubraving@fb.com>
Reviewed-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: kernel-team@fb.com
Cc: netdev@vger.kernel.org
Link: http://lkml.kernel.org/r/20190117161521.1341602-7-songliubraving@fb.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The default timeout of 500ms for parsing /proc/<pid>/maps files is too
short for profiling many of our services.
This can be overridden by passing --proc-map-timeout to the relevant
command but it'd be nice to globally increase our default value.
This patch permits setting a different default with the
core.proc-map-timeout config file parameter.
Signed-off-by: Mark Drayton <mbd@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20181204203420.1683114-1-mbd@fb.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The trace file offset is read once before mmaps iterating loop and
written back after all performance data is enqueued for aio writing.
The trace file offset is incremented linearly after every successful aio
write operation.
record__aio_sync() blocks till completion of the started AIO operation
and then proceeds.
record__aio_mmap_read_sync() implements a barrier for all incomplete
aio write requests.
Signed-off-by: Alexey Budankov <alexey.budankov@linux.intel.com>
Reviewed-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/ce2d45e9-d236-871c-7c8f-1bed2d37e8ac@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
After update of kernel, the perf tool doesn't run anymore on my 32MB RAM
powerpc board, but still runs on a 128MB RAM board:
~# strace perf
execve("/usr/sbin/perf", ["perf"], [/* 12 vars */]) = -1 ENOMEM (Cannot allocate memory)
--- SIGSEGV {si_signo=SIGSEGV, si_code=SI_KERNEL, si_addr=0} ---
+++ killed by SIGSEGV +++
Segmentation fault
objdump -x shows that .bss section has a huge size of 24Mbytes:
27 .bss 016baca8 101cebb8 101cebb8 001cd988 2**3
With especially the following objects having quite big size:
10205f80 l O .bss 00140000 runtime_cycles_stats
10345f80 l O .bss 00140000 runtime_stalled_cycles_front_stats
10485f80 l O .bss 00140000 runtime_stalled_cycles_back_stats
105c5f80 l O .bss 00140000 runtime_branches_stats
10705f80 l O .bss 00140000 runtime_cacherefs_stats
10845f80 l O .bss 00140000 runtime_l1_dcache_stats
10985f80 l O .bss 00140000 runtime_l1_icache_stats
10ac5f80 l O .bss 00140000 runtime_ll_cache_stats
10c05f80 l O .bss 00140000 runtime_itlb_cache_stats
10d45f80 l O .bss 00140000 runtime_dtlb_cache_stats
10e85f80 l O .bss 00140000 runtime_cycles_in_tx_stats
10fc5f80 l O .bss 00140000 runtime_transaction_stats
11105f80 l O .bss 00140000 runtime_elision_stats
11245f80 l O .bss 00140000 runtime_topdown_total_slots
11385f80 l O .bss 00140000 runtime_topdown_slots_retired
114c5f80 l O .bss 00140000 runtime_topdown_slots_issued
11605f80 l O .bss 00140000 runtime_topdown_fetch_bubbles
11745f80 l O .bss 00140000 runtime_topdown_recovery_bubbles
This is due to commit 4d255766d2 ("perf: Bump max number of cpus
to 1024"), because many tables are sized with MAX_NR_CPUS
This patch gives the opportunity to redefine MAX_NR_CPUS via
$ make EXTRA_CFLAGS=-DMAX_NR_CPUS=1
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/20170922112043.8349468C57@po15668-vm-win7.idsi0.si.c-s.fr
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The UAPI file byteorder/little_endian.h uses the __always_inline define
without including the header where it is defined, linux/stddef.h, this
ends up working in all the other distros because that file gets included
seemingly by luck from one of the files included from little_endian.h.
But not on Alpine:edge, that fails for all files where perf_event.h is
included but linux/stddef.h isn't include before that.
Adding the missing linux/stddef.h file where it breaks on Alpine:edge to
fix that, in all other distros, that is just a very small header anyway.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-9r1pifftxvuxms8l7ir73p5l@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We keep having bug reports that when users build perf on their own, but
they don't install some needed libraries such as libelf,
libbfd/libibery.
The perf can build, but it is missing important functionality.
This patch provides a new option '-vv' for perf which will print the
compiled-in status of libraries.
The 'perf -vv' is mapped to 'perf version --build-options'.
For example:
$ ./perf -vv
perf version 4.13.rc5.g6727c5
dwarf: [ on ] # HAVE_DWARF_SUPPORT
dwarf_getlocations: [ on ] # HAVE_DWARF_GETLOCATIONS_SUPPORT
glibc: [ on ] # HAVE_GLIBC_SUPPORT
gtk2: [ on ] # HAVE_GTK2_SUPPORT
libaudit: [ OFF ] # HAVE_LIBAUDIT_SUPPORT
libbfd: [ on ] # HAVE_LIBBFD_SUPPORT
libelf: [ on ] # HAVE_LIBELF_SUPPORT
libnuma: [ on ] # HAVE_LIBNUMA_SUPPORT
numa_num_possible_cpus: [ on ] # HAVE_LIBNUMA_SUPPORT
libperl: [ on ] # HAVE_LIBPERL_SUPPORT
libpython: [ on ] # HAVE_LIBPYTHON_SUPPORT
libslang: [ on ] # HAVE_SLANG_SUPPORT
libcrypto: [ on ] # HAVE_LIBCRYPTO_SUPPORT
libunwind: [ on ] # HAVE_LIBUNWIND_SUPPORT
libdw-dwarf-unwind: [ on ] # HAVE_DWARF_SUPPORT
zlib: [ on ] # HAVE_ZLIB_SUPPORT
lzma: [ on ] # HAVE_LZMA_SUPPORT
get_cpuid: [ on ] # HAVE_AUXTRACE_SUPPORT
bpf: [ on ] # HAVE_LIBBPF_SUPPORT
v3:
One bug is found in v2. It didn't process the option like '-vabc'
correctly. Fix this bug.
v2:
Use a global variable version_verbose to record the number of 'v'.
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1522402036-22915-6-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently we can crash perf record when running in pipe mode, like:
$ perf record ls | perf report
# To display the perf.data header info, please use --header/--header-only options.
#
perf: Segmentation fault
Error:
The - file has no samples!
The callstack of the crash is:
0x0000000000515242 in perf_event__synthesize_event_update_name
3513 ev = event_update_event__new(len + 1, PERF_EVENT_UPDATE__NAME, evsel->id[0]);
(gdb) bt
#0 0x0000000000515242 in perf_event__synthesize_event_update_name
#1 0x00000000005158a4 in perf_event__synthesize_extra_attr
#2 0x0000000000443347 in record__synthesize
#3 0x00000000004438e3 in __cmd_record
#4 0x000000000044514e in cmd_record
#5 0x00000000004cbc95 in run_builtin
#6 0x00000000004cbf02 in handle_internal_command
#7 0x00000000004cc054 in run_argv
#8 0x00000000004cc422 in main
The reason of the crash is that the evsel does not have ids array
allocated and the pipe's synthesize code tries to access it.
We don't force evsel ids allocation when we have single event, because
it's not needed. However we need it when we are in pipe mode even for
single event as a key for evsel update event.
Fixing this by forcing evsel ids allocation event for single event, when
we are in pipe mode.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180302161354.30192-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
# perf record -F 200000 sleep 1
warning: Maximum frequency rate (15,000 Hz) exceeded, throttling from 200,000 Hz to 15,000 Hz.
The limit can be raised via /proc/sys/kernel/perf_event_max_sample_rate.
The kernel will lower it when perf's interrupts take too long.
Use --strict-freq to disable this throttling, refusing to record.
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.019 MB perf.data (15 samples) ]
# perf evlist -v
cycles:ppp: size: 112, { sample_period, sample_freq }: 15000, sample_type: IP|TID|TIME|PERIOD, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, enable_on_exec: 1, task: 1, precise_ip: 3, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1
For those wanting that it fails if the desired frequency can't be used:
# perf record --strict-freq -F 200000 sleep 1
error: Maximum frequency rate (15,000 Hz) exceeded.
Please use -F freq option with a lower value or consider
tweaking /proc/sys/kernel/perf_event_max_sample_rate.
#
Suggested-by: Ingo Molnar <mingo@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-oyebruc44nlja499nqkr1nzn@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USER_REGS can currently only collected implicitely with call graph
recording. Sometimes it is useful to see them separately, and filter
them. Add a new --user-regs option to record that is similar to
--intr-regs, but acts on user regs.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20170905170029.19722-1-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Support new sample type PERF_SAMPLE_PHYS_ADDR for physical address.
Add new option --phys-data to record sample physical address.
Signed-off-by: Kan Liang <kan.liang@intel.com>
Tested-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Stephane Eranian <eranian@google.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1504026672-7304-2-git-send-email-kan.liang@intel.com
[ Added missing printing in evsel.c patch sent by Jiri Olsa ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We create many test events before the real ones just to test specific
features. But there's no way for attr tests to separate those test
events from those it needs to check.
Adding 'ready' call from the events open interface to trigger/start
events collection for attr test.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20170703145030.12903-4-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Introduce a new option to record PERF_RECORD_NAMESPACES events emitted
by the kernel when fork, clone, setns or unshare are invoked. And update
perf-record documentation with the new option to record namespace
events.
Committer notes:
Combined it with a later patch to allow printing it via 'perf report -D'
and be able to test the feature introduced in this patch. Had to move
here also perf_ns__name(), that was introduced in another later patch.
Also used PRIu64 and PRIx64 to fix the build in some enfironments wrt:
util/event.c:1129:39: error: format '%lx' expects argument of type 'long unsigned int', but argument 6 has type 'long long unsigned int' [-Werror=format=]
ret += fprintf(fp, "%u/%s: %lu/0x%lx%s", idx
^
Testing it:
# perf record --namespaces -a
^C[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 1.083 MB perf.data (423 samples) ]
#
# perf report -D
<SNIP>
3 2028902078892 0x115140 [0xa0]: PERF_RECORD_NAMESPACES 14783/14783 - nr_namespaces: 7
[0/net: 3/0xf0000081, 1/uts: 3/0xeffffffe, 2/ipc: 3/0xefffffff, 3/pid: 3/0xeffffffc,
4/user: 3/0xeffffffd, 5/mnt: 3/0xf0000000, 6/cgroup: 3/0xeffffffb]
0x1151e0 [0x30]: event: 9
.
. ... raw event: size 48 bytes
. 0000: 09 00 00 00 02 00 30 00 c4 71 82 68 0c 7f 00 00 ......0..q.h....
. 0010: a9 39 00 00 a9 39 00 00 94 28 fe 63 d8 01 00 00 .9...9...(.c....
. 0020: 03 00 00 00 00 00 00 00 ce c4 02 00 00 00 00 00 ................
<SNIP>
NAMESPACES events: 1
<SNIP>
#
Signed-off-by: Hari Bathini <hbathini@linux.vnet.ibm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Aravinda Prasad <aravinda@linux.vnet.ibm.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sargun Dhillon <sargun@sargun.me>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/148891930386.25309.18412039920746995488.stgit@hbathini.in.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding perf_evsel::ignore_missing_cpu_thread bool.
When set true, it allows perf to ignore error of missing pid of perf
event syscall.
We remove missing thread id from the thread_map, so the rest of the
processing like ioctl and mmap won't get disturbed with -1 fd.
The reason for supporting this is to ease up monitoring group of pids,
that 'disappear' before perf opens their event. This currently leads
perf to report error and exit and makes perf record's -u option unusable
under certain setup.
With this change we will allow this race and ignore such failure with
following warning:
WARNING: Ignored open failure for pid 8605
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20161213074622.GA3084@krava
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
And remove it from tools/perf/{perf,util}.h, making code that needs
these macros to include linux/time64.h instead, to match how this is
used in the kernel sources.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-e69fc1pvkgt57yvxqt6eunyg@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding --sample-cpu option to be able to explicitly enable CPU sample
type. Currently it's only enable implicitly in case the target is cpu
related.
It will be useful for following c2c record tool.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1470074555-24889-8-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When working with overwritable ring buffer there's a inconvenience
problem: if perf dumps data after a long period after it starts,
non-sample events may lost, which makes following 'perf report' unable
to identify proc name and mmap layout. For example:
# perf record -m 4 -e raw_syscalls:* -g --overwrite --switch-output \
dd if=/dev/zero of=/dev/null
send SIGUSR2 after dd runs long enough. The resuling perf.data lost
correct comm and mmap events:
# perf script -i perf.data.2016061522374354
perf 24478 [004] 2581325.601789: raw_syscalls:sys_exit: NR 0 = 512
^^^^
Should be 'dd'
27b2e8 syscall_slow_exit_work+0xfe2000e3 (/lib/modules/4.6.0-rc3+/build/vmlinux)
203cc7 do_syscall_64+0xfe200117 (/lib/modules/4.6.0-rc3+/build/vmlinux)
b18d83 return_from_SYSCALL_64+0xfe200000 (/lib/modules/4.6.0-rc3+/build/vmlinux)
7f47c417edf0 [unknown] ([unknown])
^^^^^^^^^^^^
Fail to unwind
This patch provides a '--tail-synthesize' option, allows perf to collect
system status when finalizing output file. In resuling output file, the
non-sample events reflect system status when dumping data.
After this patch:
# perf record -m 4 -e raw_syscalls:* -g --overwrite --switch-output --tail-synthesize \
dd if=/dev/zero of=/dev/null
# perf script -i perf.data.2016061600544998
dd 27364 [004] 2583244.994464: raw_syscalls:sys_enter: NR 1 (1, ...
^^
Correct comm
203a18 syscall_trace_enter_phase2+0xfe2001a8 ([kernel.kallsyms])
203aa5 syscall_trace_enter+0xfe200055 ([kernel.kallsyms])
203caa do_syscall_64+0xfe2000fa ([kernel.kallsyms])
b18d83 return_from_SYSCALL_64+0xfe200000 ([kernel.kallsyms])
d8e50 __GI___libc_write+0xffff01d9639f4010 (/tmp/oxygen_root-w00229757/lib64/libc-2.18.so)
^^^^^
Correct unwind
This option doesn't aim to solve this problem completely. If a process
terminates before SIGUSR2, we still lost its COMM and MMAP events. For
example, we can't unwind correctly from the final perf.data we get from
the previous example, because when perf collects the final output file
(when we press C-c), 'dd' has been terminated so its '/proc/<pid>/mmap'
becomes empty.
However, this is a cheaper choice. To completely solve this problem we
need to continously output non-sample events. To satisify the
requirement of daemonization, we need to merge them periodically. It is
possible but requires much more code and cycles.
Automatically select --tail-synthesize when --overwrite is provided.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nilay Vaish <nilayvaish@gmail.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1468485287-33422-16-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch allows following config terms and option:
Globally setting events to overwrite;
# perf record --overwrite ...
Set specific events to be overwrite or no-overwrite.
# perf record --event cycles/overwrite/ ...
# perf record --event cycles/no-overwrite/ ...
Add missing config terms and update the config term array size because
the longest string length has changed.
For overwritable events, it automatically selects attr.write_backward
since perf requires it to be backward for reading.
Test result:
# perf record --overwrite -e syscalls:*enter_nanosleep* usleep 1
[ perf record: Woken up 2 times to write data ]
[ perf record: Captured and wrote 0.011 MB perf.data (1 samples) ]
# perf evlist -v
syscalls:sys_enter_nanosleep: type: 2, size: 112, config: 0x134, { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|CPU|PERIOD|RAW, disabled: 1, inherit: 1, mmap: 1, comm: 1, enable_on_exec: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1, write_backward: 1
# Tip: use 'perf evlist --trace-fields' to show fields for tracepoint events
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nilay Vaish <nilayvaish@gmail.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1468485287-33422-14-git-send-email-wangnan0@huawei.com
Signed-off-by: He Kuang <hekuang@huawei.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We have callchain_param.enabled for that.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-silwqjc2t25ls42dsvg28pp5@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Allow user to easily switch all events to user or kernel space with simple
--all-user or --all-kernel options.
This will be handy within perf mem/c2c wrappers to switch easily monitoring
modes.
Committer note:
Testing it:
# perf record --all-kernel --all-user -a sleep 2
Error: option `all-user' cannot be used with all-kernel
Usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
--all-user Configure all used events to run in user space.
--all-kernel Configure all used events to run in kernel space.
# perf record --all-user --all-kernel -a sleep 2
Error: option `all-kernel' cannot be used with all-user
Usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
--all-kernel Configure all used events to run in kernel space.
--all-user Configure all used events to run in user space.
# perf record --all-user -a sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 1.416 MB perf.data (162 samples) ]
# perf report | grep '\[k\]'
# perf record --all-kernel -a sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 1.423 MB perf.data (296 samples) ]
# perf report | grep '\[\.\]'
#
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1455525293-8671-2-git-send-email-jolsa@kernel.org
[ Made those options to be mutually exclusive ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch modifies the -I/--int-regs option to enablepassing the name
of the registers to sample on interrupt. Registers can be specified by
their symbolic names. For instance on x86, --intr-regs=ax,si.
The motivation is to reduce the size of the perf.data file and the
overhead of sampling by only collecting the registers useful to a
specific analysis. For instance, for value profiling, sampling only the
registers used to passed arguements to functions.
With no parameter, the --intr-regs still records all possible registers
based on the architecture.
To name registers, it is necessary to use the long form of the option,
i.e., --intr-regs:
$ perf record --intr-regs=si,di,r8,r9 .....
To record any possible registers:
$ perf record -I .....
$ perf report --intr-regs ...
To display the register, one can use perf report -D
To list the available registers:
$ perf record --intr-regs=\?
available registers: AX BX CX DX SI DI BP SP IP FLAGS CS SS R8 R9 R10 R11 R12 R13 R14 R15
Signed-off-by: Stephane Eranian <eranian@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1441039273-16260-4-git-send-email-eranian@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Introduce callgraph_set to indicate whether the callgraph option was set
by user.
Signed-off-by: Kan Liang <kan.liang@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1438162936-59698-4-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If the option -T is used with option --per-thread, then time is still
not sampled. Fix that by using OPT_BOOLEAN_SET to distinguish when the
user used the -T option as opposed to the default case when timestamps
are enabled but only for per-cpu recording.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1436183461-1918-1-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The time out to limit the individual proc map processing was hard code
to 500ms. This patch introduce a new option --proc-map-timeout to make
the time limit configurable.
Signed-off-by: Kan Liang <kan.liang@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ying Huang <ying.huang@intel.com>
Link: http://lkml.kernel.org/r/1434549071-25611-2-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add support for making snapshots of AUX area tracing data.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1430404667-10593-9-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add support for reading from the AUX area tracing mmap and synthesizing
AUX area tracing events.
This patch introduces an abstraction for recording AUX area data.
Recording is initialized by auxtrace_record__init() which is a weak
function to be implemented by the architecture to provide recording
callbacks.
Recording is mainly handled by auxtrace_mmap__read() and
perf_event__synthesize_auxtrace() but there are callbacks for
miscellaneous needs including validating and processing user options,
populating private data in auxtrace_info_event, and freeing the
structure when finished.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1428594864-29309-5-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Teach perf-record about the new perf_event_attr::{use_clockid, clockid}
fields. Add a simple parameter to set the clock (if any) to be used for
the events to be recorded into the data file.
Since we store the entire perf_event_attr in the EVENT_DESC section we
also already store the used clockid in the data file.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: David Ahern <dsahern@gmail.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yunlong Song <yunlong.song@huawei.com>
Link: http://lkml.kernel.org/r/20150407154851.GR23123@twins.programming.kicks-ass.net
[ Conditionally define CLOCK_BOOTTIME, at least rhel6 doesn't have it - dsahern
Ditto for CLOCK_MONOTONIC_RAW, sles11sp2 doesn't have it - yunlong.song ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add an option to perf record to record running/enabled time for read
events, similar to what stat does.
This is useful to understand multiplexing problems.
Right now the report support is not great, but at least report -D
already supports it.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1424819620-16043-1-git-send-email-andi@firstfloor.org
[ Fixed the Documentation entry to match the OPT_BOOLEAN one ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add the infrastructure to setup, collect and report the interrupt
machine state regs which can be captured by the kernel.
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: cebbert.lkml@gmail.com
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Jean Pihet <jean.pihet@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Waiman Long <Waiman.Long@hp.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1411559322-16548-4-git-send-email-eranian@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Those are shared with other builtin commands like kvm, script. So
make it accessable from them. This is a preparation of later change
that limiting possible options.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Alexander Yarygin <yarygin@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1413990949-13953-3-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that all callchain config parameters can be read/written to a single
place. It's a preparation to consolidate handling of all callchain
options.
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Milian Wolff <mail@milianw.de>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1411434104-5307-3-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Into perf-sys.h header, as requested by Peter:
http://lkml.kernel.org/r/20140502115201.GI30445@twins.programming.kicks-ass.net
Adding HAVE_ATTR_TEST define to turn off/on the attribute
test code in the sys_perf_event_open function.
Requested-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1399293219-8732-10-git-send-email-jolsa@kernel.org
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Into new perf-sys.h header.
The main reason is to separate system specific perf data
from perf tool stuff, so it could be used in small test
programs, as requested Peter:
http://lkml.kernel.org/r/20140502115201.GI30445@twins.programming.kicks-ass.net
This separation makes the perf.h header more clear.
Requested-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1399293219-8732-9-git-send-email-jolsa@kernel.org
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Into util/callchain.h header where all callchain related
structures should be.
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1399293219-8732-8-git-send-email-jolsa@kernel.org
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
