If the file was fenced and/or has been deleted on the DS, then we want
to retry pNFS after a layoutreturn with error report. If the server
cannot fix the problem, then we rely on it to tell us so in the
response to the LAYOUTGET.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
According to the flexfiles protocol, the layoutreturn should specify an
array of errors in the following format:
struct ff_ioerr4 {
offset4 ffie_offset;
length4 ffie_length;
stateid4 ffie_stateid;
device_error4 ffie_errors<>;
};
This patch fixes up the code to ensure that our ffie_errors is indeed
encoded as an array (albeit with only a single entry).
Reported-by: Tom Haynes <thomas.haynes@primarydata.com>
Cc: stable@vger.kernel.org
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Client sends a SETATTR request after OPEN for updating attributes.
For create file with S_ISGID is set, the S_ISGID in SETATTR will be
ignored at nfs server as chmod of no PERMISSION.
v3, same as v2.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Create file with attributs as NFS4_CREATE_EXCLUSIVE4_1 mode
depends on suppattr_exclcreat attribut.
v3, same as v2.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Check opened, only update it when non-NULL.
It's not needs define an unused value for the opened
when calling _nfs4_do_open.
v3, same as v2.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Set rlimit for NFS's files is useless right now.
For local process's rlimit, it should be checked by nfs client.
The same, CIFS also call inode_change_ok checking rlimit at its client
in cifs_setattr_nounix() and cifs_setattr_unix().
v3, fix bad using of error
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
It's not sufficient to just mark the layout segment for layout return. We
also need to set the NFS_LAYOUT_RETURN_BEFORE_CLOSE flag in the layout header.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
In order to ensure atomicity of updates, we merge the old layout segments
into the new ones, and then invalidate the old ones.
Also ensure that we order the list of layout segments so that
RO segments are preferred over RW.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
This is needed in order to allow merging of contiguous layout segments,
and also to correct the ordering of layouts for those device drivers that
don't necessarily want to place the read-write layouts first.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Eliminate a couple of holes in the structure, and move the 2 atomics
into the same cacheline.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Allow advanced users to set the layoutstats timer in order to lengthen
or shorten the period between layoutstat transmissions to the server.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Keep the full list of mirrors in the struct nfs4_ff_layout_mirror so that
they can be shared among the layout segments that use them.
Also ensure that we send out only one copy of the layoutstats per mirror.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
We do want to share mirrors between layout segments, so add a refcount
to enable that.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
We do not want to update inode attributes with DS values.
Cc: stable@vger.kernel.org # v4.0+
Signed-off-by: Peng Tao <tao.peng@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
If we return delegation before closing, we fail to do roc check
during close because NFS_LAYOUT_ROC is cleared by delegreturn
and it causes layouts to be still hanging around after delegreturn
+ close, which is a voilation against protocol.
Signed-off-by: Peng Tao <tao.peng@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
If the ctime or mtime or change attribute have changed because
of an operation we initiated, we should make sure that we force
an attribute update. However we do not want to mark the page cache
for revalidation.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Cc: stable@vger.kernel.org # v4.0+
Make sure that we also handle RPC level connection and protocol
negotiation errors.
Reported-by: Tom Haynes <loghyr@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
We want to ensure that the stopwatches for the busy timer and the
aggregate timer are consistent. This means that they need to use
the same start/stop times.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Unlike the previous attempt, this takes into account the fact that
we may be calling it from the recovery thread itself. Detect this
by looking at what kind of open we're doing, and checking the state
of the NFS_DELEGATION_NEED_RECLAIM if it turns out we're doing a
reboot reclaim-type open.
Cc: Olga Kornievskaia <aglo@umich.edu>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Otherwise we break fstest case tests/read_write/mctime.t
Does files layout need the same fix as well?
Cc: stable@vger.kernel.org # v4.0+
Cc: Anna Schumaker <anna.schumaker@netapp.com>
Signed-off-by: Peng Tao <tao.peng@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
If layout is marked by NFS_LAYOUT_RETURN_BEFORE_CLOSE, we should always
send LAYOUTRETURN before close, and we don't need to do ROC drain if we
do send LAYOUTRETURN.
Signed-off-by: Peng Tao <tao.peng@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
This reverts commit 4e379d36c0.
This commit opens up a race between the recovery code and the open code.
Reported-by: Olga Kornievskaia <aglo@umich.edu>
Cc: stable@vger.kernel # v4.0+
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
If we have an OPEN_DOWNGRADE and CLOSE race with one another, we want
to ensure that the layout is forgotten by the client, so that we
start afresh with a new layoutget.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
The helper pnfs_roc() has already verified that we have no delegations,
and no further open files, hence no outstanding I/O and it has marked
all the return-on-close lsegs as being invalid.
Furthermore, it sets the NFS_LAYOUT_RETURN bit, thus serialising the
close/delegreturn with all future layoutget calls on this inode.
The checks in pnfs_roc_drain() for valid layout segments are therefore
redundant: those cannot exist until another layoutget completes.
The other check for whether or not NFS_LAYOUT_RETURN is set, actually
causes a hang, since we already know that we hold that flag.
To fix, we therefore strip out all the functionality in pnfs_roc_drain()
except the retrieval of the barrier state, and then rename the function
accordingly.
Reported-by: Christoph Hellwig <hch@infradead.org>
Fixes: 5c4a79fb2b ("Don't prevent layoutgets when doing return-on-close")
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
generic_file_write_iter() will already do an fsync on our behalf
if the file descriptor is O_SYNC or the file is marked as IS_SYNC.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Chuck reports seeing cases where a GETATTR that happens to race
with an asynchronous WRITE is overriding the file size, despite
the attribute barrier being set by the writeback code.
The culprit turns out to be the check in nfs_ctime_need_update(),
which sees that the ctime is newer than the cached ctime, and
assumes that it is safe to override the attribute barrier.
This patch removes that override, and ensures that attribute
barriers are always respected.
Reported-by: Chuck Lever <chuck.lever@oracle.com>
Fixes: a08a8cd375 ("NFS: Add attribute update barriers to NFS writebacks")
Cc: stable@vger.kernel.org # v4.0+
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
* bugfixes:
SUNRPC: Fix a thinko in xs_connect()
NFSv4.1/pNFS: Fix borken function _same_data_server_addrs_locked()
NFS: nfs_set_pgio_error sometimes misses errors
These patches improve both client performance and scalability, most notably
by increasing the maixmum allowed rsize and wsize and by increasing the number
of RDMA "credits". There are also several bugfixes, such as correcting how
WRITE compounds are encoded and fixing large NFS symlink operations.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=7PAr
-----END PGP SIGNATURE-----
Merge tag 'nfs-rdma-for-4.3' of git://git.linux-nfs.org/projects/anna/nfs-rdma
NFS: NFS over RDMA Client Side Changes
These patches improve both client performance and scalability, most notably
by increasing the maixmum allowed rsize and wsize and by increasing the number
of RDMA "credits". There are also several bugfixes, such as correcting how
WRITE compounds are encoded and fixing large NFS symlink operations.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
And call nfs_file_clear_open_context() directly. This makes it obvious
that nfs_file_release() will always return 0.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
All nfs_write_inode() does is pass its arguments to
nfs_commit_unstable_pages(). Let's cut out the middle man and have
nfs_write_pages() do the work directly.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
All these functions do is call nfs41_ping_server() without adding
anything. Let's remove them and give nfs41_ping_server() a better name
instead.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
The idmap_init() and idmap_quit() functions only exist to call the
_keyring() version. Let's just call the keyring() functions directly.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
They already exist and do the exact same thing. Let's save ourselves
several lines of code!
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
nfs_readdir_xdr_to_array() uses both a cache array and an array of
pages, so I rename these functions to make it clearer how the code
works. nfs_readdir_large_page() becomes nfs_readdir_alloc_pages()
because this function has absolutely nothing to do with setting up a
large page. nfs_readdir_free_pagearray() becomes
nfs_readdir_free_pages() to stay consistent with the new alloc_pages()
function.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
This variable is initialized to NULL and is never modified before being
passed to nfs_readdir_free_large_page(). But that's okay, because
nfs_readdir_free_large_page() only seems to exist as a way of calling
nfs_readdir_free_pagearray() without this parameter. Let's simplify by
removing pages_ptr and nfs_readdir_free_pagearray().
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
We already know that pg_lseg is NULL here.
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
We generally want to read and write to a block device that's used by
the pNFS block layout client (and even if it's read only the server
has no way of telling us). Add FMODE_WRITE to the mode argument
so that we don't incorrectly tell the block driver that we want a
read-only open.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
